summaryrefslogtreecommitdiffstats
path: root/arch/arm/boards/at91sam9n12ek
Commit message (Collapse)AuthorAgeFilesLines
* mtd: nand: Update to Linux-5.9Sascha Hauer2020-11-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates the barebox NAND layer and parts of the mtd layer to Linux-5.9. This patch is huge, but the barebox NAND layer is so far away from the Linux NAND layer that a step by step update would have taken ages. Unlike Linux barebox has functions to mark a block as good. This feature has been preserved. Also barebox used to make NAND write support optional, this feature is lost during the update for the sake of better compatibility to the Linux NAND layer. This patch has been tested: - GPMI aka nand_mxs on i.MX6 - nand_imx on i.MX25 - nand_omap_gpmc on AM335x - atmel_nand on Atmel sama5d3 - nand_denali on SoCFPGA Currently untested: - nand_orion - nand_mrvl_nfc - nand_s3c24xx The nand_denali driver is tested with the update of that driver to Linux-5.9 following in the next patch. I could only test the drivers with the NAND chips found on my boards, so there's still enough room for regressions, especially given that the NAND drivers themselves are mostly not updated. With the NAND layer being up-to-date with Linux it should hopefully be easy to update drivers to their Linux counterpart as well if necessary. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91: replace at91sam9_ddrsdr.h with at91bootstrap's at91_ddrsdrc.hAhmad Fatoum2020-07-111-1/+1
| | | | | | | | | | | | | | | Instead of adding missing definitions to the existing at91sam9_ddrsdr.h and adapting the incoming DDRAM initialization code from at91bootstrap, just replace the lightly used existing header with: https://github.com/linux4sam/at91bootstrap/blob/v3.8.12/include/arch/at91_ddrsdrc.h For easier comprehension, the replacement is done in three steps: This last step copies the memory size querying functions from at91sam9_ddrsdr.h to at91_ddrsdrc.h, then deletes it and fixes all references. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* arch/arm/boards: Replace license and copyright boilerplate by SPDX identfiersUwe Kleine-König2020-05-251-15/+2
| | | | | | | | | | | | | | | | This adapts all files that were identifed by licensecheck (https://salsa.debian.org/build-common-team/licensecheck.git) as licensed under the GPL. The advantage is that these specifiers are machine-parseable which helps license conformance, e.g. for packaging barebox in Debian. While touching these files also do some minor comment reformatting to get some uniform layout. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Roland Hieber <rhi@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: Cleanup stack offset cargo cultSascha Hauer2019-09-091-1/+1
| | | | | | | | | Most callers of arm_setup_stack substract a fixed offset of 8, 12 or 16 bytes from the stack top. This is unnecessary as on ARM we have a stack that decrements before storing values. Substracting this offset probably goes back to the U-Boot version we forked from. Stop this now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: boards: Harmonize barebox_arm_reset_vector() prototypeSascha Hauer2019-03-181-1/+1
| | | | | | | | | | | | barebox_arm_reset_vector() is a global function but we never provided a prototype anywhere. The prototypes differ for the different boards, so to provide a common prototype we must harmonize them. void barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2) Should be suitable for all boards. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91: remove mach/io.hSascha Hauer2018-11-061-1/+0
| | | | | | | Remove at91_sys_read() and at91_sys_write() since these are no longer used. This makes mach/io.h empty so remove that aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9n12ek: move reset vector to board codeSam Ravnborg2018-01-092-0/+27
| | | | | | | | | Delete the unused at91sam9n12_lowlevel_init.c Create new lowlevel.c that contains the reset vector. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* atmel_lcdfb: define power_control gpio in platform_dataSam Ravnborg2017-09-061-26/+2
| | | | | | | | | | | | | | | | | | | | | | Simplify board specific code by specifying the power_control gpio direct in platform data. Move registration of the GPIO to the driver so we no longer need to duplicate this for each board. As an intended side-effect there is no longer any references to platform_data outside atmel_lcdc_register() so remove it from struct atmel_lcdfb_info The implementation assumes that GPIO=0 is the same as no power control. This prevents us from using any GPIO=0 for power control, but this is not considered a problem for current users. Future DT users will not have this limitation. This commit include a fix so we will actually power down if requested. Previously this was hardcoded to ON. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* defaultenv: add defaultenv-1 in boards via defaultenv_append_directory()Sascha Hauer2016-10-104-0/+5
| | | | | | | | | | | | | | | | | | | | Currently it's hardcoded for each board which defaultenv version is used. This is unfortunate since some people like the other defaultenv version better and may want to select it. This patch removes the board specific environment path CONFIG_DEFAULT_ENVIRONMENT_PATH and instead adds it via: if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC)) defaultenv_append_directory(defaultenv_<board>); This way we can make sure that the defaultenv-1 board specific bits are only compiled in when defaultenv-1 is actually in use. The next step is to make the defaultenv version selection a user visible choice. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* include: Move fec eth platform_data to include/platform_dataSascha Hauer2016-04-151-1/+0
| | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: atmel: at91sam9n12ek: correct udc device nameBo Shen2015-02-041-2/+2
| | | | | | | | The created device name for atmel udc is at91_udc while not at91_udc0. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* sizes.h: move include/sizes.h to include/linux/sizes.hMasahiro Yamada2015-01-081-1/+1
| | | | | | | | | | | | | | This file originates in Linux. Linux has it under include/linux/ directory since commit dccd2304cc90. Let's move it to the same place as well in barebox. This commit was generated by the following commands: find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:' git mv include/sizes.h include/linux/ Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* mtd: nand: add has_pmecc memberRaphaël Poggi2014-09-021-0/+1
| | | | | | | By adding this structure member, we can retrieve the pmecc config, through the device tree. Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* env: Remove bogus USB vendor/product idsSascha Hauer2014-07-211-4/+1
| | | | | | | | Many boards use a USB vendor id of 0x4321. This doesn't exist and shouldn't be used. Remove this and also the bogus product id of 0x1234. The boards will use the barebox default vendor/product id then. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: remove armlinux_set_bootparams() calls from boardsSascha Hauer2014-01-061-1/+0
| | | | | | | As the place for the atags now is determined automatically the call from the boards can be removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: remove asm/hardware.hSascha Hauer2013-11-081-1/+1
| | | | | | | asm/hardware.h does not have any content except including mach/hardware.h. include mach/hardware.h directly where needed and get rid of asm/hardware.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/boardinfo'Sascha Hauer2013-09-051-0/+3
|\ | | | | | | | | | | | | Conflicts: arch/mips/boards/qemu-malta/init.c commands/bootm.c drivers/of/base.c
| * Set model and hostname at boardlevelSascha Hauer2013-08-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | With multiboard support the compiletime generated BOARDINFO string gets more and more meaningless. This removes it from Kconfig and replaces it with a variable that can be set at boardlevel. Also many boards have a standard setting for the hostname in the environment. This patch also moves the standard to C code by calling barebox_set_hostname(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: AT91: move iomux definitions to iomux.hSascha Hauer2013-08-161-0/+1
|/ | | | | | | mach/gpio.h is for the gpio API, so move unrelated stuff away. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91 boards: remove empty config.h filesJean-Christophe PLAGNIOL-VILLARD2013-07-091-4/+0
| | | | | | | | We just keep one on rm9200ek as I did not yet convert this SoC init to C struct and still use Macro. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91: move main clock define to CJean-Christophe PLAGNIOL-VILLARD2013-07-092-2/+7
| | | | | | | This will allow to drop the config.h and switch to multi board support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/at91'Sascha Hauer2013-02-042-1/+78
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/boards/at91rm9200ek/init.c arch/arm/boards/pm9263/init.c arch/arm/configs/at91sam9n12ek_defconfig arch/arm/mach-at91/Kconfig
| * at91sam9n12ek: add lcd supportJean-Christophe PLAGNIOL-VILLARD2013-01-312-0/+77
| | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * at91: Atmel ref board sam{9x5/9n12/m109g45} EK and Ronetix pm9g45 autodetect ↵Jean-Christophe PLAGNIOL-VILLARD2013-01-271-1/+1
| | | | | | | | | | | | | | ddr size Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | at91sam9n12: fix wp_pin invalid valueJean-Christophe PLAGNIOL-VILLARD2013-01-271-1/+1
|/ | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: SMC: switch to platform_driverJean-Christophe PLAGNIOL-VILLARD2013-01-071-3/+2
| | | | | | | This will allow to support multiple arch Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: use -EINVAL for invalid gpioJean-Christophe PLAGNIOL-VILLARD2012-12-221-2/+2
| | | | | | | switch gpio type from u8 to int in the data struct Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: add at91sam9n12ek board supportJean-Christophe PLAGNIOL-VILLARD2012-11-265-0/+368
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-28 16:49:04 +0000