summaryrefslogtreecommitdiffstats
path: root/arch/arm/boards/guf-cupid
Commit message (Collapse)AuthorAgeFilesLines
* defaultenv: add defaultenv-1 in boards via defaultenv_append_directory()Sascha Hauer2016-10-103-0/+5
| | | | | | | | | | | | | | | | | | | | Currently it's hardcoded for each board which defaultenv version is used. This is unfortunate since some people like the other defaultenv version better and may want to select it. This patch removes the board specific environment path CONFIG_DEFAULT_ENVIRONMENT_PATH and instead adds it via: if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC)) defaultenv_append_directory(defaultenv_<board>); This way we can make sure that the defaultenv-1 board specific bits are only compiled in when defaultenv-1 is actually in use. The next step is to make the defaultenv version selection a user visible choice. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* imx35-regs: add and use common CGR element shiftersAlexander Kurz2016-07-041-2/+3
| | | | | | | | | Add some missing Clock Gate Register element shifters which were implemented as magic numbers in the arm/boards directory. Use the new shifters for inproved code readability. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX: de-duplicate PLL initializer macrosAlexander Kurz2016-07-042-8/+0
| | | | | | | | | Macros for three PLL setups got cloned in different board specific subdirs. Re-unify those macros into a common place and avoid checkpatch 80-char warnings when creating a new board subdir. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* include: Move fec eth platform_data to include/platform_dataSascha Hauer2016-04-151-1/+1
| | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: i.MX: boards: Setup stack before calling imx*_barebox_entrySascha Hauer2015-03-091-3/+0
| | | | | | This allows imx*_barebox_entry to use the stack. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Documentation: remove doxygen documentationSascha Hauer2014-06-261-9/+0
| | | | | | | The doxygen documentation is long outdated. Remove it. It will be replaced with sphinx based documentation later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: harmonize in-barebox documentationHolger Schurig2014-05-141-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does probably too much, but it's hard (and very cumbersome/time consuming) to break it out. What is does is this: * each command has one short description, e.g. "list MUX configuration" * made sure the short descriptions start lowercase * each command has one usage. That string contains just the options, e.g. "[-npn]". It's not part of the long help text. * that is, it doesn't say "[OPTIONS]" anymore, every usable option is listed by character in this (short) option string (the long description is in the long help text, as before) * help texts have been reworked, to make them - sometimes smaller - sometimes describe the options better - more often present themselves in a nicer format * all long help texts are now created with BUSYBOX_CMD_HELP_ macros, no more 'static const __maybe_unused char cmd_foobar_help[]' * made sure the long help texts starts uppercase * because cmdtp->name and cmdtp->opts together provide the new usage, all "Usage: foobar" texts have been removed from the long help texts * BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this is nicer in the source code * BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself * made sure no line gets longer than 77 characters * delibertely renamed cmdtp->usage, so that we can get compile-time errors (e.g. in out-of-tree modules that use register_command() * the 'help' command can now always emit the usage, even without compiled long help texts * 'help -v' gives a list of commands with their short description, this is similar like the old "help" command before my patchset * 'help -a' gives out help of all commands Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: group 'help' outputHolger Schurig2014-05-141-0/+1
| | | | | | | | | | | | | | | | | | | The old output of "help" was just producing a long list, that usually scrolled of the screen (even on a X11 terminal). This list is more compact, and also sorted by groups. The old output format (plus grouping) is now available with 'help -v'. Example: Information commands: ?, devinfo, help, iomem, meminfo, version Boot commands: boot, bootm, go, loadb, loads, loadx, loady, saves, uimage ... Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: change signature of barebox_arm_entryLucas Stach2014-05-051-1/+1
| | | | | | | | | | | Mostly to make it clear that boarddata needs to be something we can dereference. As this is a pretty invasive change, use the opportunity to make the signature 64bit safe. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* treewide: fix signedness mixups in printf format specifiersLucas Stach2014-04-231-1/+1
| | | | | | | | | This most likely doesn't fix any real bugs, but it's the right thing to do and reduces the noise level with static checkers. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* video: Add display timing from devicetree helperSascha Hauer2014-03-291-1/+0
| | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: i.MX: cleanup bootmode selectionSascha Hauer2014-01-311-10/+11
| | | | | | | | | | | | Which bootmode is selected has no longer to be chosen by Kconfig. The boards can decide themselves which bootmode they want to support. This makes it unnecesary to ask the user which bootmode shall be supported, so the "Select boot mode" becomes invisible and both support will be compiled in as needed by the boards. NAND_IMX_BOOT goes away and the already existing ARCH_IMX_EXTERNAL_BOOT_NAND can now be used for the boards to depend on external nand boot. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: i.MX: external NAND boot: pass boarddataSascha Hauer2014-01-291-1/+1
| | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: remove armlinux_set_bootparams() calls from boardsSascha Hauer2014-01-061-1/+0
| | | | | | | As the place for the atags now is determined automatically the call from the boards can be removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/boardinfo'Sascha Hauer2013-09-052-2/+3
|\ | | | | | | | | | | | | Conflicts: arch/mips/boards/qemu-malta/init.c commands/bootm.c drivers/of/base.c
| * Set model and hostname at boardlevelSascha Hauer2013-08-162-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | With multiboard support the compiletime generated BOARDINFO string gets more and more meaningless. This removes it from Kconfig and replaces it with a variable that can be set at boardlevel. Also many boards have a standard setting for the hostname in the environment. This patch also moves the standard to C code by calling barebox_set_hostname(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: include <gpio.h> instead of <mach/gpio.h>Sascha Hauer2013-08-161-1/+1
|/ | | | | | The gpio api should be used from <gpio.h> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: i.MX boards: remove empty config.h filesSascha Hauer2013-06-241-27/+0
| | | | | | | config.h is automatically generated if not existing, so remove the empty files and files which only have unused defines. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/misc-arm'Sascha Hauer2013-04-041-1/+1
|\
| * include asm/sections.h instead of asm-generic/sections.hSascha Hauer2013-03-101-1/+1
| | | | | | | | | | | | To let the architectures override asm-generic/sections.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | net: fec: use standard phy type definesSascha Hauer2013-03-091-1/+1
|/ | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* switch boards to lwl-yJean-Christophe PLAGNIOL-VILLARD2013-02-211-2/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* arm: rename reset and common_reset to barebox_arm_reset_vector and ↵Jean-Christophe PLAGNIOL-VILLARD2013-02-081-2/+2
| | | | | | | | | arm_cpu_lowlevel_init reset is confusing with the cpu reset and impossible to grep Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX boards: switch to barebox_arm_entrySascha Hauer2013-02-041-3/+3
| | | | | | | Most i.MX boards can use the imx*_barebox_entry functions. The remaining (i.MX21, i.MX6) use hardcoded base addresses. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX: Use SRAM stack in lowlevel codeSascha Hauer2013-02-041-1/+1
| | | | | | | | Several i.MX boards setup a temporary stack in their lowlevel code. Instead of using STACK_BASE use a stack in internal SRAM to get rid of the STACK_BASE compile time dependency. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX boards: use helper function for external NAND bootSascha Hauer2013-01-201-37/+8
| | | | | | | Use helper function for external NAND boot to get some positive diffstat. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX boards: use esdctl code to detect sdram sizeSascha Hauer2012-12-061-8/+0
| | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM pcm043, cupid: Fix macro nameChristian Hemp2012-11-201-2/+2
| | | | | | | | | Since commit dc9d70e2 the define CCM_PDR4 is called MX35_CCM_PDR4. sha: Added the same for cupid Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/imx'Sascha Hauer2012-11-162-29/+34
|\ | | | | | | | | | | | | Conflicts: arch/arm/boards/guf-neso/lowlevel.c arch/arm/boards/pcm038/lowlevel.c commands/Makefile
| * ARM i.MX: get rid of imx-regs.hSascha Hauer2012-10-172-2/+2
| | | | | | | | | | | | | | | | | | - remove now unused __REG definitions - include individual SoC register files instead of imx-regs.h - move IMX_GPIO_NR to generic.h - finally remove imx-regs.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM i.MX: remove unused improperly prefixed register definesSascha Hauer2012-10-171-1/+1
| | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM i.MX35: Cleanup remaining unprefixed registersSascha Hauer2012-10-172-12/+12
| | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM i.MX: Use SoC specific base to access sdram controller registersSascha Hauer2012-10-171-14/+19
| | | | | | | | | | | | | | | | This redefines the sdram controller registers as offsets to the base rather than as absolute addresses. All users are fixed to use the SoC specific base address. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: introduce arm_setup_stack function and use itSascha Hauer2012-10-131-4/+2
|/ | | | | | | We have enough places which setup0 a stack to justify a static inline function for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX35: Add function to setup chipselectSascha Hauer2012-10-041-3/+3
| | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX35: give register base addresses a proper MX35_ prefixSascha Hauer2012-10-042-51/+51
| | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/arm-board-reset'Sascha Hauer2012-10-031-2/+5
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/start-reset.c arch/arm/include/asm/barebox-arm.h arch/arm/mach-omap/Kconfig arch/arm/mach-omap/omap3_core.S
| * ARM: give boards control of the reset entry pointJan Luebbe2012-09-271-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On some SoCs (for example AM35xx), the ROM bootloader passes useful information in r0 when jumping to barebox. To avoid overwriting this in the generic reset code, we introduce common_reset as a C function and as an assembler macro. This is then called form the reset entry point (either in common or in board code). This patch is based on code by Sascha Hauer <s.hauer@pengutronix.de>. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/remove-fsf-address'Sascha Hauer2012-10-034-16/+0
|\ \ | | | | | | | | | | | | | | | Conflicts: drivers/net/miidev.c include/miidev.h
| * | Treewide: remove address of the Free Software FoundationSascha Hauer2012-09-174-16/+0
| |/ | | | | | | | | | | | | The FSF address has changed in the past. Instead of updating it each time the address changes, just drop it completely treewide. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* / defaultenv: switch hostname to global.hostnameJean-Christophe PLAGNIOL-VILLARD2012-10-021-7/+7
|/ | | | | | Udpate dhcp with it too. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* ARM boards: Make boards pbl safeSascha Hauer2012-08-121-0/+1
| | | | | | | | With pbl support enabled most boards need a pbl-y for their lowlevel stuff. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* ARM boards: Use _text rather than TEXT_BASESascha Hauer2012-07-231-2/+2
| | | | | | | | | | With compressed image support TEXT_BASE will become the base address of the uncompressed image. What the boards want instead is the base address of the decompressor code or, if not compressed, the base address of the uncompressed image. Use _text which is the correct one for both cases. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Removed duplicate definition for DEVFS_PARTITION_xxxAlexander Shiyan2012-05-131-2/+2
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* config: switch machine to hostnameJean-Christophe PLAGNIOL-VILLARD2012-04-181-7/+7
| | | | | | | So we can use it for dhcp request too. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX iomux-v3: Sync to kernelSascha Hauer2012-04-121-1/+1
| | | | | | | | This means using an uint64_t instead of a struct pad_desc which allows us to change pad settings using logic operations. Also with this we can more easily keep the iomux tables in sync with the kernel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* imx_nand_load_image: change all users to use barebox_image_sizeMichael Grzeschik2012-03-131-1/+2
| | | | | Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: remove struct command pointer from commandsSascha Hauer2012-02-271-1/+1
| | | | | | This is unused in all commands and thus can be removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* video imx-ipu-fb: add num_modes to imx3 boardsTeresa Gámez2012-01-231-0/+1
| | | | | | | | | Added num_modes to all imx_ipu_fb_platform_data structs. Removed defines for pcm043 to choose display. We may switch this during runtime now. Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* defaultenv: simplify bootSascha Hauer2011-12-151-5/+0
| | | | | | | | Now that we have a bootm command which boots everything we can simplify the defaultenvironment. We can call bootm on every image type and can remove the kernelimage_type variables. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-25 19:24:49 +0000