summaryrefslogtreecommitdiffstats
path: root/arch/arm/boards/guf-vincell
Commit message (Collapse)AuthorAgeFilesLines
* ARM: i.MX53 Vincell: Add NAND xload supportSascha Hauer2016-09-221-0/+9
| | | | | | | | The Vincell boards do the SDRAM setup from board init code, so the image size is limited to the internal SRAM size. To overcome this limitation use the NAND xload support. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: i.MX53 Vincell: Add PBL console supportSascha Hauer2016-09-221-21/+29
| | | | | | | PBL console support is more useful than debug_ll. Add support for it to the Vincell Board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: i.MX53 Vincell: Adjust bbu handler partition size to real partition sizeSascha Hauer2016-09-221-1/+1
| | | | | | | The bootloader partition size was increased to 0xe0000, so adjust the barebox update handler partition size accordingly. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: i.MX53 Vincell: Reset phy consistently from device treeSascha Hauer2016-09-221-11/+0
| | | | | | | | | | | | The phy reset for the Vincell board is done from device tree whereas the Vincell-LT resets the phy from board init code. Since both boards share the same code base the regular Vincell board ends up with a duplicated phy reset, with the second reset being done after the FEC has been initialized. Fix this by removing the phy reset from the board code and adding the phy reset to the Vincell-LT dts file. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM iMX53: avoid magic number addressing for internal RAMAlexander Kurz2016-06-271-1/+1
| | | | | | | | | The imx53 SOC features 128kB of internal SRAM which is commonly used in early stages of barebox to store the stack. Avoid magic numbers while addressing this RAM. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: GuF Vincell: run code for LT variant aswellSascha Hauer2016-04-271-1/+2
| | | | | | | The LT variant has a different compatible, yet we want to run the code on this variant aswell. Add the corresponding test. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx53: vincell: guard board initcallLucas Stach2015-08-281-0/+3
| | | | | | | Make sure that the initcall only executes on the expected board. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: vincell: move to DT probingSteffen Trumtrar2015-07-135-310/+44
| | | | | | | | | | | | This enabled multi image support for the Garz&Fricke Vincell board. Also it adds the Vincell-LT as a second image with a separate device tree. Previously we used the same image on both the Vincell and the Vincell-LT image since the differences are not that significant for barebox. Still this was good for quite some confusion internally, so let's properly introduce a second image. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/misc'Sascha Hauer2015-03-091-1/+0
|\
| * OMAP and i.MX boards: do not set console= commandline parameter in environmentSascha Hauer2015-02-231-1/+0
| | | | | | | | | | | | | | | | This is not necessary since for OMAP and i.MX the console= parameter is initialized by the serial driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Suggested-by: Teresa Gámez <t.gamez@phytec.de>
* | ARM: i.MX: boards: Setup stack before calling imx*_barebox_entrySascha Hauer2015-03-091-0/+1
| | | | | | | | | | | | This allows imx*_barebox_entry to use the stack. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: Vincell: add usb deviceMichael Grzeschik2015-03-021-0/+10
|/ | | | | Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* defaultenv-2: fix misplace NV dir in envJean-Christophe PLAGNIOL-VILLARD2015-01-132-0/+0
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* sizes.h: move include/sizes.h to include/linux/sizes.hMasahiro Yamada2015-01-081-1/+1
| | | | | | | | | | | | | | This file originates in Linux. Linux has it under include/linux/ directory since commit dccd2304cc90. Let's move it to the same place as well in barebox. This commit was generated by the following commands: find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:' git mv include/sizes.h include/linux/ Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/persistent-vars'Sascha Hauer2014-12-083-7/+2
|\ | | | | | | | | Conflicts: arch/arm/boards/efika-mx-smartbook/defaultenv-efikasb/config
| * defaultenv-2: Make use of nonvolatile variablesSascha Hauer2014-11-063-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This moves the variable assignments previously done in /env/config-board to non volatile variables in /env/nv/. This makes the settings adjustable by the user without editing a file. Most of the changes are simple conversions which for many boards makes /env/config-board unnecessary. Some boards had some logic to assign global.boot.default based on the current bootsource. This has been moved to /env/init/bootsource. An additional check is added to not overwrite a nv.boot.default should it exist. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: imx5: add imx5_cpu_lowlevel_init and use in all boardsLucas Stach2014-11-071-1/+2
|/ | | | | | | | This is similar to what we do on imx6 and makes sure we apply the errata workarounds early. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* remove unused boot-menu-add-entrySascha Hauer2014-06-231-5/+0
| | | | | | | The boot-menu-add-entry script no longer exists. Remove it from boot scripts. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: i.MX: bbu: remove dcd arguments from bbu registrationSascha Hauer2014-05-091-4/+1
| | | | | | | | | | | The i.MX barebox update handlers take an optional dcd table as argument. This can be used to add the correct dcd data to the image before flashing it. This mechanism is quite complicated and largely unused, so remove it. With this it is only possible to flash the exact image passed to barebox_update, which is what is mostly done anyway. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: change signature of barebox_arm_entryLucas Stach2014-05-051-2/+2
| | | | | | | | | | | Mostly to make it clear that boarddata needs to be something we can dereference. As this is a pretty invasive change, use the opportunity to make the signature 64bit safe. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: i.MX51 vincell: Switch to imximageSascha Hauer2014-02-133-42/+4
| | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: remove armlinux_set_bootparams() calls from boardsSascha Hauer2014-01-061-1/+0
| | | | | | | As the place for the atags now is determined automatically the call from the boards can be removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Set model and hostname at boardlevelSascha Hauer2013-08-161-0/+3
| | | | | | | | | | | | With multiboard support the compiletime generated BOARDINFO string gets more and more meaningless. This removes it from Kconfig and replaces it with a variable that can be set at boardlevel. Also many boards have a standard setting for the hostname in the environment. This patch also moves the standard to C code by calling barebox_set_hostname(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: i.MX53 vincell: Fix lowlevel startupSascha Hauer2013-05-301-2/+2
| | | | | | This is a i.MX53 board, not i.MX51. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Remove unused config.hAlexander Shiyan2013-04-091-24/+0
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* net: fec: use standard phy type definesSascha Hauer2013-03-091-1/+1
| | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* switch boards to lwl-yJean-Christophe PLAGNIOL-VILLARD2013-02-211-2/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* arm: rename reset and common_reset to barebox_arm_reset_vector and ↵Jean-Christophe PLAGNIOL-VILLARD2013-02-081-2/+2
| | | | | | | | | arm_cpu_lowlevel_init reset is confusing with the cpu reset and impossible to grep Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX boards: switch to barebox_arm_entrySascha Hauer2013-02-041-2/+3
| | | | | | | Most i.MX boards can use the imx*_barebox_entry functions. The remaining (i.MX21, i.MX6) use hardcoded base addresses. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* defenv-2: migrate guf-vincell to config-boardMichael Olbrich2013-01-313-16/+7
| | | | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX: Add Garz+Fricke Vincell Board supportSascha Hauer2012-12-069-0/+576
This adds support for the Garz+Fricke Vincell board. This has a i.MX53 Processor with 512MB of DDR3 RAM. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-28 05:05:02 +0000