summaryrefslogtreecommitdiffstats
path: root/arch/arm/boards/usb-a926x
Commit message (Collapse)AuthorAgeFilesLines
* defaultenv: add defaultenv-1 in boards via defaultenv_append_directory()Sascha Hauer2016-10-104-0/+5
| | | | | | | | | | | | | | | | | | | | Currently it's hardcoded for each board which defaultenv version is used. This is unfortunate since some people like the other defaultenv version better and may want to select it. This patch removes the board specific environment path CONFIG_DEFAULT_ENVIRONMENT_PATH and instead adds it via: if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC)) defaultenv_append_directory(defaultenv_<board>); This way we can make sure that the defaultenv-1 board specific bits are only compiled in when defaultenv-1 is actually in use. The next step is to make the defaultenv version selection a user visible choice. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* input: gpio-keys: Use KEY_* keycodesSascha Hauer2016-01-131-4/+5
| | | | | | | | The gpio-keys driver takes ascii key codes from platform_data and Linux keycodes from device tree. Convert the ascii keys over to Linux keycodes to get rid of the special cases in the driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/misc'Sascha Hauer2015-01-091-1/+1
|\
| * sizes.h: move include/sizes.h to include/linux/sizes.hMasahiro Yamada2015-01-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This file originates in Linux. Linux has it under include/linux/ directory since commit dccd2304cc90. Let's move it to the same place as well in barebox. This commit was generated by the following commands: find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:' git mv include/sizes.h include/linux/ Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | arm: at91: fix ecc_mode on non atmel boardsJean-Christophe PLAGNIOL-VILLARD2015-01-061-0/+1
|/ | | | | | | | | | | | | | | since commit 54bccadddd52cb4cbbecd1403b9091fe651bd0fd Author: Raphaël Poggi <poggi.raph@gmail.com> mtd: atmel_nand: retrieve ecc_mode from pdata break most of the non atmel AT91 boards that did not provide a ecc_mode params in the nand pdata Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* env: Remove bogus USB vendor/product idsSascha Hauer2014-07-211-4/+1
| | | | | | | | Many boards use a USB vendor id of 0x4321. This doesn't exist and shouldn't be used. Remove this and also the bogus product id of 0x1234. The boards will use the barebox default vendor/product id then. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Documentation: remove doxygen documentationSascha Hauer2014-06-262-63/+0
| | | | | | | The doxygen documentation is long outdated. Remove it. It will be replaced with sphinx based documentation later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* input: Add BB_ prefix to KEY_ definesSascha Hauer2014-02-171-4/+4
| | | | | | | Our KEY_ defines conflict with the standard Linux KEY_ defines, so add a BB_ prefix to them. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: remove armlinux_set_bootparams() calls from boardsSascha Hauer2014-01-061-1/+0
| | | | | | | As the place for the atags now is determined automatically the call from the boards can be removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: remove asm/hardware.hSascha Hauer2013-11-081-1/+1
| | | | | | | asm/hardware.h does not have any content except including mach/hardware.h. include mach/hardware.h directly where needed and get rid of asm/hardware.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/boardinfo'Sascha Hauer2013-09-051-0/+11
|\ | | | | | | | | | | | | Conflicts: arch/mips/boards/qemu-malta/init.c commands/bootm.c drivers/of/base.c
| * Set model and hostname at boardlevelSascha Hauer2013-08-161-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | With multiboard support the compiletime generated BOARDINFO string gets more and more meaningless. This removes it from Kconfig and replaces it with a variable that can be set at boardlevel. Also many boards have a standard setting for the hostname in the environment. This patch also moves the standard to C code by calling barebox_set_hostname(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: AT91: move iomux definitions to iomux.hSascha Hauer2013-08-161-0/+1
|/ | | | | | | mach/gpio.h is for the gpio API, so move unrelated stuff away. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91 boards: remove empty config.h filesJean-Christophe PLAGNIOL-VILLARD2013-07-091-4/+0
| | | | | | | | We just keep one on rm9200ek as I did not yet convert this SoC init to C struct and still use Macro. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91: move main clock define to CJean-Christophe PLAGNIOL-VILLARD2013-07-092-2/+7
| | | | | | | This will allow to drop the config.h and switch to multi board support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* macb: rename platform dataJosh Cartwright2013-04-031-1/+1
| | | | | | | | | | The macb/gem core is used by the Zynq SoC. In preparation of sharing the macb driver between at91 and Zynq, rename the platform data to 'struct macb_platform_data', and move the definition to a common location. Signed-off-by: Josh Cartwright <joshc@eso.teric.us> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/misc'Sascha Hauer2013-03-041-3/+1
|\
| * switch boards to lwl-yJean-Christophe PLAGNIOL-VILLARD2013-02-211-3/+1
| | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: at91: use -EINVAL for invalid gpio on atmel_mciFabio Porcedda2013-02-191-0/+2
|/ | | | | | Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9: drop AT91_BASE_SYS for sdram controllerJean-Christophe PLAGNIOL-VILLARD2013-02-051-1/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM AT91: switch at91sam9 to barebox_arm_entry part1Sascha Hauer2013-02-041-2/+2
| | | | | | | | | This switches the at91sam926x, 9g10 and 9g20 over to barebox_arm_entry. For these SoCs we currently support reading back the memory size from the SDRAM controller, so all of these can have a common reset() function. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* usb-a926x: only provide the resource if the driver is enableJean-Christophe PLAGNIOL-VILLARD2013-02-041-3/+39
| | | | | | | usefull for bootstrap Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* macb: allow to pass the phy interfaceJean-Christophe PLAGNIOL-VILLARD2013-01-291-1/+1
| | | | | | | as we will add later the GMAC IP verion support (GEM) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: usb_a9263: add bootstrap versionJean-Christophe PLAGNIOL-VILLARD2013-01-222-0/+19
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: usb-a9263 add lowlevel initJean-Christophe PLAGNIOL-VILLARD2013-01-222-0/+117
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: SMC: switch to platform_driverJean-Christophe PLAGNIOL-VILLARD2013-01-071-3/+2
| | | | | | | This will allow to support multiple arch Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: use -EINVAL for invalid gpioJean-Christophe PLAGNIOL-VILLARD2012-12-221-1/+2
| | | | | | | switch gpio type from u8 to int in the data struct Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* macb/ether: split flags for drivers and phylibJean-Christophe PLAGNIOL-VILLARD2012-11-191-1/+1
| | | | | | | | | as in the kernel use is_rmii flags for pinctrl phy_flags for phylib flags Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* usb-a9g20: add mmc spi supportJean-Christophe PLAGNIOL-VILLARD2012-11-161-6/+31
| | | | | | | on the 9g20 low power version we have a mmc spi as microSD Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* usb-a9263: add spi dataflash supportJean-Christophe PLAGNIOL-VILLARD2012-10-151-0/+21
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* calao: at91 qil/tny/usb auto detect the phy addrJean-Christophe PLAGNIOL-VILLARD2012-10-041-1/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/remove-fsf-address'Sascha Hauer2012-10-031-4/+0
|\ | | | | | | | | | | Conflicts: drivers/net/miidev.c include/miidev.h
| * Treewide: remove address of the Free Software FoundationSascha Hauer2012-09-171-4/+0
| | | | | | | | | | | | | | The FSF address has changed in the past. Instead of updating it each time the address changes, just drop it completely treewide. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | dhcp: switch to global var supportJean-Christophe PLAGNIOL-VILLARD2012-10-021-3/+3
|/ | | | | | | | | | This way you can specify as previously set the dhcp parameter via global.dhcp.xxx and get the result via global.dhcp.xxx This is need for the defaultenv-2 to add the bootp suppport. Use it on defaultenv too to have only one set of var. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Merge branch 'for-next/misc'Sascha Hauer2012-09-052-0/+63
|\
| * Add documentation for the calao boardsgregory hermant2012-08-292-0/+63
| | | | | | | | | | Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/device-id'Sascha Hauer2012-09-051-1/+1
|\ \
| * | devices: fix missing conversion to DEVICE_ID_DYNAMICJean-Christophe PLAGNIOL-VILLARD2012-08-121-1/+1
| |/ | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | NAND Flash SMC timings update (nwe_pulse) for calao board based on ↵gregory hermant2012-08-311-1/+1
| | | | | | | | | | | | | | AT91SAM9G20 SoC Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | at91: Calao and Atmel reboard sam{9260/9g20/9261/9g10/9263}ek autodetect ↵Jean-Christophe PLAGNIOL-VILLARD2012-08-031-5/+1
|/ | | | | | | sdram size Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Removed duplicate definition for DEVFS_PARTITION_xxxAlexander Shiyan2012-05-131-4/+4
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* usb-a926x: add oftree supportJean-Christophe PLAGNIOL-VILLARD2012-04-101-5/+7
| | | | | | | | Boot via nfs instead of tftp and zImage. Update nand partition layout to store the oftree. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Gregory HERMANT <gregory.hermant@calao-systems.com>
* usb-a926x: update DHCP vendor IDJean-Christophe PLAGNIOL-VILLARD2012-04-101-1/+3
| | | | | | | Depending on machine id. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Gregory HERMANT <gregory.hermant@calao-systems.com>
* ARM: at91: allow to pass the interface id to at91_add_device_ethJean-Christophe PLAGNIOL-VILLARD2012-04-021-1/+1
| | | | | | | On the sam9x5 series we now support 1 or 2 macb. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: set ip mode to dhcp-bareboxJean-Christophe PLAGNIOL-VILLARD2012-04-021-1/+1
| | | | | | | As the mainline kernel does not enable the bootp support by default Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: set dhcp vendor id on Atmel Reference boardJean-Christophe PLAGNIOL-VILLARD2012-03-171-0/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* usb-a926x: add DAB MMX Daughter board supportJean-Christophe PLAGNIOL-VILLARD2012-02-161-0/+108
| | | | | | | | - gpio_keys support - leds - uarts 2 and 4 (for oled) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* calao/usb-926x: update usb gadget supportJean-Christophe PLAGNIOL-VILLARD2012-01-041-9/+15
| | | | | | | | | | | | enable serial and dfu at the same time senario if the usb device is plugged and the BP is not pressed at boot time during 5s the usbserial will be enable disable zlib support to fit in the 256K Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* usb-a926x: add dfu supportJean-Christophe PLAGNIOL-VILLARD2012-01-022-0/+52
| | | | | | | | | detect it at boot time if the user button is pressed 5s and the vbus is 1 start the dfu Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* usb-a926x: add led supportJean-Christophe PLAGNIOL-VILLARD2012-01-021-0/+18
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-01 09:55:17 +0000