| Commit message (Collapse) | Author | Age | Files | Lines |
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This updates the barebox NAND layer and parts of the mtd layer to
Linux-5.9.
This patch is huge, but the barebox NAND layer is so far away from the
Linux NAND layer that a step by step update would have taken ages.
Unlike Linux barebox has functions to mark a block as good. This feature
has been preserved. Also barebox used to make NAND write support
optional, this feature is lost during the update for the sake of better
compatibility to the Linux NAND layer.
This patch has been tested:
- GPMI aka nand_mxs on i.MX6
- nand_imx on i.MX25
- nand_omap_gpmc on AM335x
- atmel_nand on Atmel sama5d3
- nand_denali on SoCFPGA
Currently untested:
- nand_orion
- nand_mrvl_nfc
- nand_s3c24xx
The nand_denali driver is tested with the update of that driver to
Linux-5.9 following in the next patch.
I could only test the drivers with the NAND chips found on my boards, so
there's still enough room for regressions, especially given that the
NAND drivers themselves are mostly not updated. With the NAND layer
being up-to-date with Linux it should hopefully be easy to update
drivers to their Linux counterpart as well if necessary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \
| |/
|/| |
|
| |
| |
| |
| |
| |
| |
| |
| | |
The size of the buffer allocated in the function is needed if it shall be
inspected more closely later. Therefore optionally return it via a new pointer
argument.
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adapts all files that were identifed by licensecheck
(https://salsa.debian.org/build-common-team/licensecheck.git) as
licensed under the GPL.
The advantage is that these specifiers are machine-parseable which helps
license conformance, e.g. for packaging barebox in Debian.
While touching these files also do some minor comment reformatting to
get some uniform layout.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
Most callers of arm_setup_stack substract a fixed offset of 8, 12 or 16
bytes from the stack top. This is unnecessary as on ARM we have a stack
that decrements before storing values. Substracting this offset probably
goes back to the U-Boot version we forked from. Stop this now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
| |
barebox_arm_reset_vector() is a global function but we never provided a
prototype anywhere. The prototypes differ for the different boards, so
to provide a common prototype we must harmonize them.
void barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
Should be suitable for all boards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
The base addresses used in at91sam926x_board_init() differ with each
SoC. The board knows which SoC we are running on though, so create and
use SoC specific variants of these functions which pass the appropriate
base addresses to at91sam926x_board_init().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
Remove at91_sys_read() and at91_sys_write() since these are no longer
used. This makes mach/io.h empty so remove that aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
Add SoC namespace to matrix define so we have one source less of
conflicting defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
| |
Many boards have the same ethernet phy reset function, so share the code
in a common function.
While at it remove the AT91_RSTC offset from the rstc register defines.
AT91_RSTC was the offset between the AT91_SYSTEM_BASE and the reset
controller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
| |
For all Calao USB boards move reset vector to board code.
Introduce two different lowlevel.c files, one
for each processor.
Include renames to make filenames similar.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The aim with this conversion is to drop the dependency
where the mach-at91/ code call code in the boards file.
This dependency must be dropepd to enable multi-image builds.
The selection of lowlevel_init functions are pushed to
the individual boards.
Use AT91SAM926X_BOARD_INIT for the boards that share the
at91sam926x_board_init file, and push this to the
individual boards. To be used in follow-up patches
bootstrap is likewise pushed out to the individual boards.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently it's hardcoded for each board which defaultenv version is
used. This is unfortunate since some people like the other defaultenv
version better and may want to select it.
This patch removes the board specific environment path
CONFIG_DEFAULT_ENVIRONMENT_PATH and instead adds it via:
if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
defaultenv_append_directory(defaultenv_<board>);
This way we can make sure that the defaultenv-1 board specific bits are
only compiled in when defaultenv-1 is actually in use.
The next step is to make the defaultenv version selection a user visible
choice.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
The gpio-keys driver takes ascii key codes from platform_data and Linux
keycodes from device tree. Convert the ascii keys over to Linux
keycodes to get rid of the special cases in the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This file originates in Linux. Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.
This commit was generated by the following commands:
find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
git mv include/sizes.h include/linux/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
since
commit 54bccadddd52cb4cbbecd1403b9091fe651bd0fd
Author: Raphaël Poggi <poggi.raph@gmail.com>
mtd: atmel_nand: retrieve ecc_mode from pdata
break most of the non atmel AT91 boards that did not provide a ecc_mode
params in the nand pdata
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
Many boards use a USB vendor id of 0x4321. This doesn't exist and
shouldn't be used. Remove this and also the bogus product id of 0x1234.
The boards will use the barebox default vendor/product id then.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
Our KEY_ defines conflict with the standard Linux KEY_ defines, so
add a BB_ prefix to them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
As the place for the atags now is determined automatically the call
from the boards can be removed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
asm/hardware.h does not have any content except including mach/hardware.h.
include mach/hardware.h directly where needed and get rid of asm/hardware.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\
| |
| |
| |
| |
| |
| | |
Conflicts:
arch/mips/boards/qemu-malta/init.c
commands/bootm.c
drivers/of/base.c
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
| |
mach/gpio.h is for the gpio API, so move unrelated stuff
away.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
We just keep one on rm9200ek as I did not yet convert this SoC init to C
struct and still use Macro.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
This will allow to drop the config.h and switch to multi board support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
| |
The macb/gem core is used by the Zynq SoC. In preparation of sharing
the macb driver between at91 and Zynq, rename the platform data to
'struct macb_platform_data', and move the definition to a common
location.
Signed-off-by: Josh Cartwright <joshc@eso.teric.us>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| | |
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
| |
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
| |
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
This switches the at91sam926x, 9g10 and 9g20 over to barebox_arm_entry.
For these SoCs we currently support reading back the memory size from
the SDRAM controller, so all of these can have a common reset() function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|
|
|
|
|
|
| |
usefull for bootstrap
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
as we will add later the GMAC IP verion support (GEM)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
| |
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
| |
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
This will allow to support multiple arch
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
switch gpio type from u8 to int in the data struct
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
as in the kernel use is_rmii
flags for pinctrl
phy_flags for phylib flags
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
on the 9g20 low power version we have a mmc spi as microSD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
| |
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|
|
|
|
| |
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\
| |
| |
| |
| |
| | |
Conflicts:
drivers/net/miidev.c
include/miidev.h
|
| |
| |
| |
| |
| |
| |
| | |
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
|
| |
This way you can specify as previously set the dhcp parameter via global.dhcp.xxx
and get the result via global.dhcp.xxx
This is need for the defaultenv-2 to add the bootp suppport.
Use it on defaultenv too to have only one set of var.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|\ |
|
| |
| |
| |
| |
| | |
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|