| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
arm_mem_barebox_image() is used to pick a suitable place where to
put the final image to. This is called from both the PBL uncompression
code and also from the final image. To make it work properly it is
crucial that it's called with the same arguments both times. Currently
it is called with the wrong image size from the PBL uncompression code.
The size passed to arm_mem_barebox_image() has to be the size of the
whole uncompressed image including the BSS segment size. The PBL code
calls it with the compressed image size instead and without the BSS
segment. This patch fixes this by reading the uncompressed image size
from the compressed binary (the uncompressed size is appended to the
end of the compressed binary by our compression wrappers). The size
of the BSS segment is unknown though by the PBL uncompression code,
so we introduce a maximum BSS size which is used instead.
The code before this patch worked by accident because the base address
of the final image was aligned down to a 1MiB boundary. The alignment
was sufficient already to make enough space. This breaks though when
the uncompressed image including BSS becomes bigger than 1MiB while
the compressed image is smaller.
Fixes: 65071bd0: arm: Clarify memory layout calculation
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
|
|
|
|
| |
When SDRAM reaches to the end of the address space the comparison
membase + memsize evaluates to 0, so pc - membase < memsize can never
be true. Fix this by substracting membase on both sides of the
comparison.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The memory calculations used are all hardcoded into three different
files, start-pbl.c, uncompress.c and start.c. To make this more readable
and reliable, this patch gathers these information in barebox-arm.h with
static inline functions for the calculation of the memory offsets.
This patch also adds proper handling of different barebox/board data
sizes. Currently only 1MB+Alignment of RAM is reserved for Barebox and
board data. This could be too small for bigger devicetrees and barebox.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
|
|
|
|
|
| |
All versions of barebox_arm_entry (in uncompress.c, start.c and
start-pbl.c) appear to be doing exacty the same thing. So move the
definition into a separate file and use IS_ENABLED macro to avoid
re-definition.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |\ |
|
| | |
| |
| |
| |
| |
| |
| |
| | |
Now that we have printf support in the PBL we can use it right
after setup_c(). Add some debug messages to the early PBL code
to make it more clear what is happening there.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
| |
This file originates in Linux. Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.
This commit was generated by the following commands:
find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
git mv include/sizes.h include/linux/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
|
|
|
|
|
|
| |
We used to relocate the executable to the current address. This does
not work when the executable runs from a readonly location like for
example NOR Flash. Test if we run from inside the available memory and
if we do, relocate to the current address as before. Otherwise copy
the executable to the start of memory and relocate to that address.
While at it add some comments to the code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
|
|
|
|
|
|
| |
Mostly to make it clear that boarddata needs to be
something we can dereference.
As this is a pretty invasive change, use the opportunity
to make the signature 64bit safe.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
| |
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
|
|
|
|
|
|
| |
The multi image startup process used to have three binaries involved:
- The lowlevel board code to initialize SDRAM
- the uncompressor
- the regular (compressed) barebox binary
Drop the uncompressor and put the uncompress code into the lowlevel
board code binary. This makes the startup process easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The data caches should be invalided once during startup. This should
also be done when we do not have the MMU enabled in barebox because
the Kernel does not invalidate the caches during start.
To make this sure this patch enables the arm_early_mmu_cache_invalidate
function even if MMU support is disabled. Additionally this patch adds
calls to arm_early_mmu_cache_invalidate in start.c and uncompress.c.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
This adds the make infrastructure to build multiple SoC or
board specific images from a single barebox binary.
The basic idea is that we no longer have a single pbl, but instead
multiple pbls, one per image if necessary. Each pbl is defined
by its entry function so that each pbl can do exactly what a given
board needs. Additionally the pbls together with a self extracting
barebox binary can be encapsulated in specific image formats.
squashed in build fixes from Lucas Stach for make version >= 3.82:
Split Multimage Makefile rule in explicit and implicit parts
Fixes build with make version >=3.82
Frome the make 3.82 NEWS file:
* WARNING: Backward-incompatibility!
In previous versions of make it was acceptable to list one or more explicit
targets followed by one or more pattern targets in the same rule and it
worked "as expected". However, this was not documented as acceptable and if
you listed any explicit targets AFTER the pattern targets, the entire rule
would be mis-parsed. This release removes this ability completely: make
will generate an error message if you mix explicit and pattern targets in
the same rule.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lucas Stach <dev@lynxeye.de>
|
