summaryrefslogtreecommitdiffstats
path: root/arch/mips/lib
Commit message (Collapse)AuthorAgeFilesLines
* lds: Add and use RO_DATA_SECTION macroSascha Hauer2019-10-141-12/+4
| | | | | | | | | We have many different pointer arrays which we put into linker sections and each time there's one added we have to adjust all linker scripts. This adds a common RO_DATA_SECTION define and uses it for all architectures. This makes it easier to add a new linker array. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* lds: create and use BAREBOX_PCI_FIXUP macroSascha Hauer2019-10-141-13/+1
| | | | | | | No need to repeat the pci fixup sections in each linker script. Add a define for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* lds: Move start/end address variables into definesSascha Hauer2019-10-141-19/+2
| | | | | | | | | | | For the older section defines we specify the start and end addresses outside the macro which means we have to repeat them in each linker script. Make the start/end addresses part of the define to simplify things. While at it, add a BAREBOX_ prefix to the INITCALLS and EXITCALLS macros for consistency to the other defines. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sam Ravnborg <sam@ravnborg.org>
* barebox.lds: Remove unnecessary bracesSascha Hauer2019-10-141-2/+2
| | | | | | | The BAREBOX_CLK_TABLE and BAREBOX_DTB macros are defines that do not take a parameter, so we can remove the braces. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* mips: bootm: Cast elf entry into unsigned longClement Leger2019-09-061-1/+1
| | | | | | | | | Since elf entry type is now a u64 to accomodate both type of elf files (64 and 32 bits), we need to cast it to the pointer length before casting it to the pointer type. Signed-off-by: Clement Leger <cleger@kalray.eu> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* mips: reloc: remove outdated commentOleksij Rempel2019-07-021-11/+0
| | | | | Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: relocate_code: fix barebox image memcpy() sizeAntony Pavlov2019-06-201-6/+5
| | | | | | | | | | | | | | | | | In this relocate_code() piece 'length' is greater than 'barebox_image_size': #define MAX_BSS_SIZE SZ_1M ... length = barebox_image_size + MAX_BSS_SIZE; relocaddr = ALIGN_DOWN(ram_size - barebox_image_size, SZ_64K); ... memcpy((void *)relocaddr, __image_start, length); so 'ram_size' overflow occurs during memcpy(). Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: lib/Makefile: fix whitespacesAntony Pavlov2019-06-201-2/+2
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: relocation: do not use configurable memory layoutOleksij Rempel2019-04-232-5/+22
| | | | | | | | | The relocator is not able to patch properly new location of the stack. To make it work properly it is better to disable HAVE_CONFIGURABLE_MEMORY_LAYOUT. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: relocation: add relocation supportOleksij Rempel2019-04-234-3/+217
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this patch i a port of following patch from u-boot with some additional integration changes and fixes of original code: | Subject: [PATCH] MIPS: Stop building position independent code | | U-Boot has up until now built with -fpic for the MIPS architecture, | producing position independent code which uses indirection through a | global offset table, making relocation fairly straightforward as it | simply involves patching up GOT entries. | | Using -fpic does however have some downsides. The biggest of these is | that generated code is bloated in various ways. For example, function | calls are indirected through the GOT & the t9 register: | | 8f998064 lw t9,-32668(gp) | 0320f809 jalr t9 | | Without -fpic the call is simply: | | 0f803f01 jal be00fc04 <puts> | | This is more compact & faster (due to the lack of the load & the | dependency the jump has on its result). It is also easier to read & | debug because the disassembly shows what function is being called, | rather than just an offset from gp which would then have to be looked up | in the ELF to discover the target function. | | Another disadvantage of -fpic is that each function begins with a | sequence to calculate the value of the gp register, for example: | | 3c1c0004 lui gp,0x4 | 279c3384 addiu gp,gp,13188 | 0399e021 addu gp,gp,t9 | | Without using -fpic this sequence no longer appears at the start of each | function, reducing code size considerably. | | This patch switches U-Boot from building with -fpic to building with | -fno-pic, in order to gain the benefits described above. The cost of | this is an extra step during the build process to extract relocation | data from the ELF & write it into a new .rel section in a compact | format, plus the added complexity of dealing with multiple types of | relocation rather than the single type that applied to the GOT. The | benefit is smaller, cleaner, more debuggable code. The relocate_code() | function is reimplemented in C to handle the new relocation scheme, | which also makes it easier to read & debug. | | Taking maltael_defconfig as an example the size of u-boot.bin built | using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils | 2.24.90) shrinks from 254KiB to 224KiB. | | Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* pbl multiimage: Allow to check image sizesSascha Hauer2019-03-131-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PBL images are often constrained in size by limitations exposed by the SoCs SRAM size or partition sizes on the boot device. So far we tried to configure these limits in Kconfig, but with PBL multi images and thus different limitations for the different supported images this no longer works. This patch has another approach for it: During build time make variables containing the relevant sizes for each image are created. These are: PBL_CODE_SIZE_$(symbol) PBL_MEMORY_SIZE_$(symbol) PBL_IMAGE_SIZE_$(symbol) PBL_CODE_SIZE_$(symbol) contains the pure code size of the PBL, it should be smaller than the available SRAM during boot. Normally the PBL's bss segment also needs to be in the initial SRAM, for this case PBL_MEMORY_SIZE_$(symbol) is the relevant variable. PBL_IMAGE_SIZE_$(symbol) contains the full size of the PBL image including the compressed payload (but without any image headers created later by SoC specific image tools). $(symbol) is a placeholder for the start symbol used for this PBL image, thus for the i.MX53 QSB with entry start_imx53_loco PBL_CODE_SIZE_start_imx53_loco will be created. The images/Makefile.* can use these variables directly to check sizes or specify the same variables with a "MAX_" prefix. So when images/Makefile.imx specifies MAX_PBL_CODE_SIZE_start_imx53_loco = 0x10000 then the build system will make sure that the PBL code for the QSB will not get bigger than 64KiB. Also included in this patch are the size restrictions for the i.MX8MQ images as an example how to use this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: ath79: add spi and sram bootstrap helpersOleksij Rempel2019-01-242-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | At least some ath79 SoC have build in 32K RAM. It allow us to use lowlevel portion of barebox to bootstrap the system by using JTAG debugger (For example OpenOCD). Since ath79 has no reliable way to stop the CPU execution before reading SPI Flash, this can cause different issues. To avoid it, we need to flash a execution trap with software debug breakpoint to the flash. The workflow should be as follow: - After power on or reset the CPU will start execution of SPI flash. As soon as software debug breakpoint is executed, CPU will halt and notify OpenOCD about breakpoint event. - OpenOCD will load reduced barebox to SRAM and execute it. This part will do all needed low level initialization - PLL, RAM and trigger second breakpoint event. - OpenOCD will load full barebox version to the main RAM and start execution. It can be used for bring-up, so no regular flashing is needed. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: convert files with not precise GNU version to SPDXOleksij Rempel2019-01-033-12/+3
| | | | | | | | | Default barebox license is GPL-2.0-only. Set it to the files with the missing one. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: migrate all files to SPDXOleksij Rempel2019-01-036-55/+6
| | | | | | Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: add arch/mips/lib/pbl.lds.SOleksij Rempel2018-12-131-0/+53
| | | | | | | we need it for multiimage support. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: fix PCI quirk infrastructure buildAntony Pavlov2018-09-171-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | The commit fc2c618c2038 ("pci: add quirk infrastructure") adds necessary ld-script changes only for ARM architecture. As a result, qemu-malta build fails: LD barebox drivers/built-in.o: In function `pci_fixup_device': (.text.pci_fixup_device+0x30): undefined reference to `__end_pci_fixups_enable' (.text.pci_fixup_device+0x38): undefined reference to `__end_pci_fixups_enable' (.text.pci_fixup_device+0x34): undefined reference to `__start_pci_fixups_enable' (.text.pci_fixup_device+0x3c): undefined reference to `__start_pci_fixups_enable' (.text.pci_fixup_device+0x70): undefined reference to `__end_pci_fixups_header' (.text.pci_fixup_device+0x78): undefined reference to `__end_pci_fixups_header' (.text.pci_fixup_device+0x74): undefined reference to `__start_pci_fixups_header' (.text.pci_fixup_device+0x80): undefined reference to `__start_pci_fixups_header' (.text.pci_fixup_device+0x2c): undefined reference to `__end_pci_fixups_early' (.text.pci_fixup_device+0x88): undefined reference to `__end_pci_fixups_early' (.text.pci_fixup_device+0x84): undefined reference to `__start_pci_fixups_early' (.text.pci_fixup_device+0x90): undefined reference to `__start_pci_fixups_early' make: *** [Makefile:767: barebox] Error 1 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/riscv'Sascha Hauer2018-07-095-120/+0
|\
| * MIPS: Use generic GCC library routines from lib/Antony Pavlov2018-06-295-120/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | This is a port of Linux kernel commit | commit 740129b36faf049e6845819144542a0455e1e285 | Author: Antony Pavlov <antonynpavlov@gmail.com> | Date: Wed Apr 11 08:50:19 2018 +0100 | | MIPS: Use generic GCC library routines from lib/ Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/bootm'Sascha Hauer2018-07-091-0/+59
|\ \ | |/ |/|
| * MIPS: bootm: add ELF handlerOleksij Rempel2018-06-181-0/+59
| | | | | | | | | | | | | | | | With this handler barebox will be able to start linux kernel as is, without additional image conversion. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | MIPS: use CKSEG1 instead of KSEG1Peter Mamonov2018-05-241-4/+4
|/ | | | | | | | KSEG1 constant is defined for 32 bit MIPS only. Use CKSEG1 which is defined for both MIPS32 and MIPS64. Signed-off-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* dma: Use dma_addr_t as type for DMA addressesSascha Hauer2018-03-291-2/+2
| | | | | | | DMA addresses are not necessarily the same as unsigned long. Fix the type for the dma_sync_single_* operations. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ratp: implement generic command supportAleksander Morgado2018-03-011-0/+4
| | | | | | | | | | | | | | | | | | | The RATP implementation now allows executing generic commands with a binary interface: binary requests are received and binary responses are returned. Each command can define its own RATP request contents (e.g. to specify command-specific options) as well as its own RATP response contents (if any data is to be returned). Each command is associated with a pair of numeric unique request and response IDs, and for easy reference these IDs are maintained in the common ratp_bb header. Modules may override generic implemented commands or include their own new ones (as long as the numeric IDs introduced are unique). Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: add 74Kc infoOleksij Rempel2017-07-311-0/+4
| | | | | | | This patch is preparation for SoC QCA AR9344 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
* MIPS: barebox.lds.S: put .text_entry contents after _stext and _textAntony Pavlov2017-05-081-1/+1
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: barebox.lds.S: remove unused gotAntony Pavlov2017-05-081-3/+0
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: barebox.lds.S: drop unneeded '_start = .'Antony Pavlov2017-05-081-1/+0
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* include: Move bulk of boot.h to bootm.hSascha Hauer2016-07-261-0/+1
| | | | | | | | The majority of the stuff currently in include/boot.h is about bootm code implemented common/bootm.c. To be more consistent move it to a new file include/bootm.h. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: csrc-r4k: get cp0 counter rate from devicetreeAntony Pavlov2016-07-071-2/+22
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: implement dma_sync_* functionsPeter Mamonov2016-03-092-0/+58
| | | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: flush cache on shutdownAntony Pavlov2016-03-093-0/+37
| | | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: add initial R4000-style cache supportAntony Pavlov2016-03-091-0/+47
| | | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: probe_scache(): use MIPS_CONF_M linux kernel macroAntony Pavlov2016-03-091-3/+2
| | | | | | | | | We already have MIPS_CONF_M macro in <asm/mipsregs.h> so we have no need in homebrew CONFIG_M macro. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* bootm: Push dryrun to handlersSascha Hauer2016-01-261-0/+6
| | | | | | | We can make the dryrun option more useful by calling into the handlers. With this we can detect more cases that can go wrong during boot. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: import optimized string functions from LinuxAleksey Kuleshov2015-11-263-0/+425
| | | | | | | | | 10x performance gain according to simple test on QEMU malta: barebox:/ time memcpy 0xa0000000 0xa0001000 0x100000 Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru> Acked-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: allow user to pass incorrect address to md commandAntony Pavlov2015-11-112-6/+52
| | | | | | | | | | | | | | | | | | | | | | This commit makes it possible to handle exception on incorrect data access so 'md' command just show 'xxxxxxxx' instead of crashing the system. barebox:/ md -l 0xa0000003+4 a0000003: xxxxxxxx .... Without this commit we will get this barebox:/ md -l 0xa0000003+4 a0000003: Ooops, address error on load or ifetch! ... ### ERROR ### Please RESET the board ### Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: traps.c: separate registers print stuff to show_regs()Antony Pavlov2015-11-111-7/+12
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* mips: cpuinfo: report secondary cache configurationPeter Mamonov2015-11-031-1/+10
| | | | | Signed-off-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* mips: c-r4k: detect secondary cachePeter Mamonov2015-11-032-2/+31
| | | | | Signed-off-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: PBL: Add missing pieces for xz compressed PBL imageAntony Pavlov2015-09-211-0/+2
| | | | | | | Also ignore piggy.shipped binary (CONFIG_IMAGE_COMPRESSION_NONE=y). Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* restart: replace reset_cpu with registered restart handlersSascha Hauer2015-08-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | This replaces the reset_cpu() function which every SoC or board must provide with registered handlers. This makes it possible to have multiple reset functions for boards which have multiple ways to reset the machine. Also boards which have no way at all to reset the machine no longer have to provide a dummy reset_cpu() function. The problem this solves is that some machines have external PMICs or similar to reset the system which have to be preferred over the internal SoC reset, because the PMIC can reset not only the SoC but also the external devices. To pick the right way to reset a machine each handler has a priority. The default priority is 100 and all currently existing restart handlers are registered with this priority. of_get_restart_priority() allows to retrieve the priority from the device tree which makes it possible for boards to give certain restart handlers a higher priority in order to use this one instead of the default one. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* exitcall: Add exitcall infrastructureHerve Codina2015-07-131-0/+4
| | | | | | | | exitcall infrastructure is based on initcall infrastructure. It allows to have and use exit call hooks on barebox shutdown. Signed-off-by: Herve Codina <Herve.CODINA@celad.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* treewide: Reuse init_clock() return value for clocksource driversAlexander Shiyan2014-11-101-2/+1
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: add (another) Ingenic vendor IDAntony Pavlov2014-09-111-0/+1
| | | | | | | | | | | | | | | | | | | The latest Ingenic CPUs (e.g. JZ4780) use new vendor ID. Based on commit from https://github.com/MIPS/CI20_linux/tree/ci20-v3.16 commit 00b672aa52f299f1d67ab18274c3f5e5d5a15767 Author: Paul Burton <paul.burton@imgtec.com> Date: Mon Jul 8 12:14:28 2013 +0100 MIPS: add (another) Ingenic vendor ID Ingenic have switched to a new vendor ID for the Xburst core used in their current SoCs such as the jz4780. Add this vendor ID and handle it in addition to their former vendor ID. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: add support for metadata in barebox imagesAntony Pavlov2014-08-071-0/+2
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* move file helper functions to separate fileSascha Hauer2014-08-071-0/+1
| | | | | | | | | | We have our file helper functions in several places. Move them all to lib/libfile.c. With this we no longer have file helpers in fs/fs.c which contains the core fs functions and no functions in lib/libbb.c which are not from busybox. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: harmonize in-barebox documentationHolger Schurig2014-05-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does probably too much, but it's hard (and very cumbersome/time consuming) to break it out. What is does is this: * each command has one short description, e.g. "list MUX configuration" * made sure the short descriptions start lowercase * each command has one usage. That string contains just the options, e.g. "[-npn]". It's not part of the long help text. * that is, it doesn't say "[OPTIONS]" anymore, every usable option is listed by character in this (short) option string (the long description is in the long help text, as before) * help texts have been reworked, to make them - sometimes smaller - sometimes describe the options better - more often present themselves in a nicer format * all long help texts are now created with BUSYBOX_CMD_HELP_ macros, no more 'static const __maybe_unused char cmd_foobar_help[]' * made sure the long help texts starts uppercase * because cmdtp->name and cmdtp->opts together provide the new usage, all "Usage: foobar" texts have been removed from the long help texts * BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this is nicer in the source code * BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself * made sure no line gets longer than 77 characters * delibertely renamed cmdtp->usage, so that we can get compile-time errors (e.g. in out-of-tree modules that use register_command() * the 'help' command can now always emit the usage, even without compiled long help texts * 'help -v' gives a list of commands with their short description, this is similar like the old "help" command before my patchset * 'help -a' gives out help of all commands Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: group 'help' outputHolger Schurig2014-05-141-0/+1
| | | | | | | | | | | | | | | | | | | The old output of "help" was just producing a long list, that usually scrolled of the screen (even on a X11 terminal). This list is more compact, and also sorted by groups. The old output format (plus grouping) is now available with 'help -v'. Example: Information commands: ?, devinfo, help, iomem, meminfo, version Boot commands: boot, bootm, go, loadb, loads, loadx, loady, saves, uimage ... Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: lib: add BAREBOX_CLK_TABLE to linker scriptAntony Pavlov2014-03-281-0/+2
| | | | | | | | | | | | | | | This commit is based on commit fa1a406f7245c5482a17014d5b97e8948352e5a5 Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Date: Sat Nov 9 14:24:18 2013 +0100 ARM: lib: add BAREBOX_CLK_TABLE to linker script This adds an .oftables section right before .dtb section with BAREBOX_CLK_TABLE to ARM linker script. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: csrc-r4k: use CLOCKSOURCE_MASK() macroAntony Pavlov2014-01-301-1/+1
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-23 11:26:02 +0000