| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
| |
The main idea behind this patch is to avoid redundant board code.
Because of the module similarities of all am335x based phytec boards, we can
merge its code.
The phytec-som-am335x merges the code of all am335x based phytec SOMs.
So we will have only one "board" in the barebox for phyCORE, phyFLEX.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
Added a new compatible type for am335x phytec SOMs
"phytec,am335x-som"
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
| |
To support different module variants, this patch splits the phyFLEX DT
in dts and dtsi.
And we are also adding a DT for the MLO, which has all bootable devices
disabled. The bootsource is checked in the board file and only the needed
device is enabled and registered.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| | |
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch imports the sequencer code from uboot using the new script
scripts/socfpga_get_sequencer.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Use the new socfpga_mem_calibration function. This is a sideeffect of
the new script to import generated sequencer code. The return value of
the function is 1 if the calibration succeeds, 0 otherwise.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| | |
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| | |
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Altera's U-Boot tree has following commit
FogBugz #159721: Enhance Arria V MPU clock to 1050MHz
It writes to the two undocumented registers
CLKMGR_ALTERAGRP_MPUCLK
and
CLKMGR_ALTERAGRP_MAINCLK
to setup the SoC for higher clocks.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| | |
From Altera U-Boot:
FogBugz #210587: Fixing PLL HW configuration issue
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| | |
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Here is checkpatch.pl log:
WARNING: space prohibited between function name and open parenthesis '('
#134: FILE: arch/arm/mach-bcm2835/core.c:75:
+void __noreturn reset_cpu (unsigned long addr)
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
increase the mbox timeout as it take more time to retreive the mac
fix led register too
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
this will allow to handle IP power automatically and not at board level
Mainline kernel need this as they do not have the regulator driver support
as some IP such as USB are not power on at boot
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | | |
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
as the name is very long, return ps1 to the next line
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Add support for the Intel XScale PXA255 development system platform.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Add support for the PXA25X SoC family, the oldest of the PXA serie.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Add the first pxa3xx board, zylonite. Zylonite is the Marvell System
Development Platform.
Several version are available, based on either :
- PXA300
- PXA310
- PXA320
This version was only tested on a PXA310 based board, and uses :
- the ethernet controller
- the nand controller
These drivers seem to be common to all zylonite boards.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Add the pxa3xx architecture, for pxa300, pxa310 and pxa320 SoCs.
This includes :
- the registers
- the cpu type
- the reset source handling
- a minimal set of clocks
- pin control definitions
In this last case, the big mfp-pxaxxx.h files were dropped, forcing
board developers to use MFP_LPM_* macros cunningly.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |/ /
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move reset_source detection and poweroff to pxa2xx.c, to prepare the
incoming pxa3xx reset_source detection.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Instead of introducing new functions each time a new power supply
situation is to be added, this patch adds parameters to mx28_power_init.
Right now there are three parameters:
- has_battery - true when this board has a battery.
- use_battery_input - true when this board is supplied from the
battery input, but has a DC source instead of a real battery
- use_5v_input - true when this board can use the 5V input
The third one is introduced with this patch and allow to boot a board from 5v
(USB) source only. The main necessary change this needs is that the DC-DC
converter must always be sourced from DCDC_4P2 (DROPOUT_CTRL field of
HW_POWER_DCDC4P2)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Add the device tree compatible strings.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The ocotp device is completely SoC internal, no need to register
it from boards. Register it from SoC code instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This turns the MXS gpio support into a driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
When a device tree is present the SoC internal devices come from
it, so do not register them as platform devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
mxs_power_init_4p2_params and mxs_power_init_4p2_regulator are used
only once, so inline the code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The brownout setting can be at maximum 7*25mV below the voltage
setting of the regulator. Set it to the minimum Voltage which is
1325mV.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This switches the imx28evk to new environment and updates the
defconfig file for tons of new features.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This switches the imx28evk to multiimage support and adds the
lowlevel initialization to make the bootlets unnecessary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ \ |
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
For Blackfin, C symbols are prefixed with '_'.
If CONFIG_CMD_MAGICVAR is enabled for Blackfin, the following error occurs:
commands/built-in.o: In function `do_magicvar':
commands/magicvar.c:(.text+0x3326): undefined reference to `__barebox_magicvar_start'
commands/magicvar.c:(.text+0x332a): undefined reference to `__barebox_magicvar_end'
commands/magicvar.c:(.text+0x332e): undefined reference to `__barebox_magicvar_start'
commands/magicvar.c:(.text+0x3332): undefined reference to `__barebox_magicvar_end'
make: *** [barebox] Error 1
Add '_' to __barebox_magicvar_start and __barebox_magicvar_end,
like the other symbols in this linker script.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Since include/linux/linkage.h includes <asm/linkage.h>, the basic
coding style we should follow is:
- <linux/linkage.h> should contain default macro defines
- <asm/linkage.h> can define arch-specific macros and override the
default ones in <linux/linkage.h>
The arch/blackfin/include/asm/linkage.h has redundant defines that
are already defined in <linux/linkage.h>.
Replace it with the one imported from Linux 3.19-rc6.
Generally, <asm/linkage.h> should not be included directly.
Fix two files to include <linux/linkage.h> instead.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The relocated_to_adr does not clear the .bss section.
It is done by the setup_c routine.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
This allows "make ARCH=... defconfig".
Fox example, you can type "make defconfig" instead of
"make sandbox_defconfig".
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The definition of "comma" exists in scripts/Kbuild.include.
We should not double it.
Note:
This was already fixed in Linux Kernel too.
See commit 226422d08c33 of Linux Kernel.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |_|/
| |/| |
| | | |
| | | |
| | | | |
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ \ |
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The parameters ECC Strength, BadBlockMarkerByte and BadBlockMarkerStartBit in
the FCB structure depends on the nand chip's pagesize and oobsize. Instead of
hardcoding these values into the imx6 bbu handler calculate these values on the
fly. Therefore we export the necessary functions from the nand_mxs driver to
use them in the bbu handler.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Add partitions oftree and kernel on SPI NOR and increase size of barebox and
barebox-environment partition.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|