summaryrefslogtreecommitdiffstats
path: root/commands/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* Cleanup Kconfig filesAlexander Shiyan2013-08-121-8/+8
| | | | | | | | | This patch provides a global cleanup barebox Kconfig files. This includes replacing spaces to tabs, formatting in accordance format. No functional changes. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* UBI: reimport UBI from Linux v3.10Sascha Hauer2013-07-251-3/+3
| | | | | | | | | | | This is a fresh UBI import from Linux v3.10 This is done mainly to get fastmap support. This was tested with the i.MX nand driver, the MXS nand driver and on CFI NOR flash. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/memtest'Sascha Hauer2013-07-011-8/+9
|\
| * commands: add new memtest commandAlexander Aring2013-06-081-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new memtest can test the whole unused memory. The new memtest command try to request the whole unused sdram regions on all banks and run the mem_test routine from common/memtest.c on it. The memtest command has only two parameters; -i Amount of iterations, default 1, iteration of 0 is endless. -b Set this to skip integrity check.(Do only a fast test for bus lines) If MMU support is enable, memtest try to run memtest twice. The first with cache enabled, the second with cache disabled. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * memtest: remove memtest commandAlexander Aring2013-06-051-9/+0
| | | | | | | | | | | | | | Remove memtest command. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | bootm: factor out code to make it usable from CSascha Hauer2013-06-191-0/+1
|/ | | | | | | Much of the bootm code is implemented in the command itself. Move it to a common place to be able to call it from C aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* devices: add detect mechanismSascha Hauer2013-05-311-0/+9
| | | | | | | | | | | | | | | We often encounter the situation where slow devices should not be probed during startup since probing is slow and maybe unnecessary for unused devices. With MMC we have the 'probe' device parameter, for ata we have the same, for USB we have the 'usb' command. Overall this is not very consistent. With MMC there is the additional problem that the probe parameter is attached to the logical device when we often have the information which physical device we want to probe. This patch adds a 'detect' callback for devices and adds a command to detect devices and to list the devices which are actually detecable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/misc'Sascha Hauer2013-05-061-2/+2
|\
| * commands: the crc command is actually called crc32Jan Luebbe2013-04-161-2/+2
| | | | | | | | | | Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Add memory modify command (mm)Sascha Hauer2013-04-171-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | As of now we have no way to manipulate individual bits of registers on the command line. This introduces a memory modify command which allows this. It has the syntax: mm [OPTIONS] <adr> <val> <mask> With [OPTIONS] being the usual memory command options (-b, -w, -l, -d <file>). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | memory commands: separate into one file per commandSascha Hauer2013-04-171-1/+41
|/ | | | | | | | | | Normally in commands we have one file per command which is named like the command itself. The memory commands are an exception to this. This patch changes this by separating the memory commands. This also has the effect that the memory commands can now be selected individually. Along the way we add some Kconfig help text for the commmands. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* oftree command: retire CMD_OFTREE_PROBE Kconfig optionSascha Hauer2013-03-061-7/+0
| | | | | | | | Whether or not the user wishes devicetree probe support can now be decided indepentently of the oftree command, so retire the CMD_OFTREE_PROBE option and use OFDEVICE in the code instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* of: make OFDEVICE a user selectable optionSascha Hauer2013-03-061-3/+0
| | | | | | | | | | OFDEVICE decides whether or not we compile in support for probing devices from the devicetree. Let the user decide this explicitly. This makes the oftree, of_node and of_property commands independent of devicetree device support since being able to manipulate devicetrees has nothing to do with probing devices from the devicetree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* oftree: fix probe supportJean-Christophe PLAGNIOL-VILLARD2013-02-111-0/+7
| | | | | | | | | | in commit e118761c5f7e8 oftree command: refactor the Kconfig CMD_OFTREE_PROBE was remove Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/oftree'Sascha Hauer2013-02-041-5/+15
|\ | | | | | | | | Conflicts: drivers/of/base.c
| * commands: Add of_node commandSascha Hauer2013-01-191-0/+8
| | | | | | | | | | | | This command allows to create/delete device nodes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * commands: Add of_property commandSascha Hauer2013-01-191-0/+9
| | | | | | | | | | | | | | | | The of_property command allows to modify/add/delete properties. Parsing user input is based on U-Boot code with some fixes added for catching invalid input. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * oftree command: refactorSascha Hauer2013-01-191-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This has several improvements for the oftree command: - loading a devicetree (-l) and actually probing (-p) it now is separated - the command now can dump the internal devicetree or a dtb given on the command line. - The -f option now actually frees the internal devicetree With this the usage pattern for this command is: oftree -l /env/oftree oftree -d -n /sound oftree -d /env/oftree oftree -f oftree -p oftree -l -p /env/oftree Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/misc'Sascha Hauer2013-02-041-0/+3
|\ \
| * | introduce console none supportJean-Christophe PLAGNIOL-VILLARD2013-01-231-0/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | this will allow to have no console support Use full for bootstrap as we can save 6.5 KiB (barebox.bin) and 3.8 KiB (zbarebox.bin lzo) on at91sam9263 as example vs console simple As on bootstrap we have often very limited size. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/commands'Sascha Hauer2013-02-041-0/+7
|\ \ | |/ |/|
| * commands: add let command which supports proper arithmeticJan Luebbe2013-01-091-0/+7
| | | | | | | | | | | | | | | | This command works like the corresponding Unix shell command and is used for adding, multiplying and much more. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | commands: add ubiformatWolfram Sang2012-12-191-0/+8
|/ | | | | | | | | Imported from mtd-utils and stripped down to needed functionality. Based on an older version (1.4.5.) since the newer do use MEMWRITE interfaces which we don't have in barebox (yet). Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Cleanup Kconfig filesAlexander Shiyan2012-12-081-16/+15
| | | | | | | | | This patch provides a global cleanup barebox Kconfig files. This includes replacing spaces to tabs, formatting in accordance format, removing extraneous lines and spaces. No functional changes. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/ymodem'Sascha Hauer2012-11-161-0/+1
|\
| * commands: change Y-Modem implementationRobert Jarzmik2012-11-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current Y-Modem implementation has some limitations: - Y-Modem/G protocol is not supported - Multiple files (aka. batch) transfers are not supported - Transfer speed over fast lines (USB console) is slow - Code is not trivial to maintain (personnal opinion) This implementation tries to address all these points by introducing loady2 command. The effects are : - transfer speed for Y-Modem over USB jumps from 2kBytes/s to 180kBytes/s - transfer speed for Y-Modem/G jumps to 200kBytes/s - multiple file transfers are possible This command was tested on a USB console and UART 9600bps serial line : - NAKs (and retransmissions) were tested for faulty serial lines - multiple file transfers were tested - Y-Modem, Y-Modem/G and X-Modem transfers were tested Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/spi'Sascha Hauer2012-11-161-0/+6
|\ \
| * | introduce spi commandJean-Christophe PLAGNIOL-VILLARD2012-11-121-0/+6
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usefull to debug spi The command allow to read/write on a spi device Usage: spi [OPTION] [data to write 0xXX] write/read spi device. -b <bus_num> spi bus number (default = 0) -r <count> to read -c <cs> chip select (default = 0) -m <mode> spi mode (default = 0) -f <hz> max_speed_hz (default = 1MHz) -w <bit> bits_per_word (default = 8) -v verbose Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/misc'Sascha Hauer2012-11-161-4/+15
|\ \ | | | | | | | | | | | | | | | | | | Conflicts: commands/Makefile Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | add 'miitool' command to view media-independent interface statusAntony Pavlov2012-10-301-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This command is based on the 'mii-diag' and 'mii-tool' Unix utilities, but it lacks routines to manipulate MII state (e.g. reset MII, restart autonegotiation or force MII mode). This version of the 'miitool' command has no GbE support, but we can upgrade it in the future. The GbE support patch for generic 'mii-tool' is here http://ftp.debian.org/debian/pool/main/n/net-tools/net-tools_1.60-24.2.diff.gz EXAMPLE: barebox:/ miitool -vv /dev/phy0 negotiated 100baseTx-FD, link ok registers for MII PHY: 3100 782d 0013 78e2 01e1 45e1 0007 2001 0000 ffff ffff ffff ffff ffff ffff ffff 0084 4780 0000 0000 0422 0000 0000 0000 0000 0000 0080 0000 ffff 0000 0000 3660 product info: Level One LXT971A rev 2 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | commands/Kconfig: move 'ln' to the 'file commands' sectionAntony Pavlov2012-10-301-4/+4
| | | | | | | | | | | | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | | Merge branch 'for-next/imx'Sascha Hauer2012-11-161-0/+5
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/boards/guf-neso/lowlevel.c arch/arm/boards/pcm038/lowlevel.c commands/Makefile
| * | | Add in-system barebox update infrastructureSascha Hauer2012-10-171-0/+5
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently in-system update means to write an arbitrary file to an arbitrary device. There is no sanity check if the flashed image is of the right type or will fit onto the device. Furthermore some SoCs need a special preparation step for their images before flashing them. This adds a barebox in-system update infrastructure. Boards can register update handlers which know how to make the board bootable. The available handlers can be listed to be able to select one, different force levels give the user the chance to know it better. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | / add filetype command supportSascha Hauer2012-10-301-0/+5
| |/ |/| | | | | | | | | | | | | | | | | | | | | This adds support for a filetype detection command. It can be used to print a filename on the console or to set a variable with the detection result for use in shell scripts. The command also has an option to print the known filetypes so that a user knows what to match for. Based on an earlier version from Jean-Christophe. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | wd: Provide default value for watchdog timeoutSascha Hauer2012-10-261-0/+1
|/ | | | | | Otherwise barebox can't be built if the user did not specify a value. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* gui: move gui file to include/gui and lib/guiJean-Christophe PLAGNIOL-VILLARD2012-10-041-8/+15
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: Add clk commandsSascha Hauer2012-10-041-0/+8
| | | | | | | | | | | | | | | | | This adds some basic commands to manupulate clocks on the command line. Right now we have: - clk_set_parent - clk_set_rate - clk_enable - clk_disable - clk_dump The commands work based on the clock name, otherwise they behave like the Linux Kernel C functions. clk_dump will dump the clocktree to the console. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/tftp'Sascha Hauer2012-10-031-0/+8
|\
| * net: Add tftp command which uses the new tftp codeSascha Hauer2012-09-281-0/+8
| | | | | | | | | | | | | | | | | | | | | | Traditionally tftp is a command of its own. Since we can mount tftp as a filesystem we have duplicated the tftp code, the old code is used by the tftp command, the new by the filesystem support. This adds a tftp command based on the filesystem support to preserve backward compatibility. This allows us to remove the old tftp support in the next step. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/testing-menu'Sascha Hauer2012-10-031-17/+21
|\ \
| * | commands: move memtest to testingAlexander Aring2012-09-111-9/+9
| | | | | | | | | | | | | | | | | | | | | Move memtest to testing commands menu. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | commands: move nandtest to testingAlexander Aring2012-09-111-8/+8
| | | | | | | | | | | | | | | | | | | | | Move nandtest in commands menu. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | commands: add testing menuAlexander Aring2012-09-111-0/+4
| |/ | | | | | | | | | | | | Add command menu for testing utilities. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/png'Sascha Hauer2012-10-031-2/+3
|\ \ | | | | | | | | | | | | | | | Conflicts: common/filetype.c include/filetype.h
| * | add PNG supportJean-Christophe PLAGNIOL-VILLARD2012-09-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | use LodePNG version 20120729 from http://lodev.org/lodepng/ The original coding style is keeped to simplify update. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | splash/bmp: switch to image_rendererJean-Christophe PLAGNIOL-VILLARD2012-09-121-0/+1
| | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | bmp: Move bmp rendering to lib/bmp.cJean-Christophe PLAGNIOL-VILLARD2012-09-121-0/+1
| | | | | | | | | | | | | | | | | | | | | So we can add other format support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | bmp: rename it to splashJean-Christophe PLAGNIOL-VILLARD2012-09-121-2/+2
| |/ | | | | | | | | | | | | so be can add more format support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* / oftree command: Add devicetree probe supportSascha Hauer2012-09-141-1/+11
|/ | | | | | | | | | With this the -p option is no longer for parse, but for probe instead. Using this parses a devicetree given on the command line and probes the devices found in this tree. Devices which already exist are not probed again, but instead their device_node is attached to the existing device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/misc'Sascha Hauer2012-09-051-1/+0
|\
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-19 11:33:09 +0000