summaryrefslogtreecommitdiffstats
path: root/commands/setenv.c
Commit message (Collapse)AuthorAgeFilesLines
* commands: setenv: allow use with hush shellAhmad Fatoum2020-09-181-0/+2
| | | | | | | | | | | | | | | | | | | setenv was so far restricted to the simple shell, because with hush, users could just do dev.var=VAL for setting variables in the environment. The hush syntax doesn't allow for setting all kinds of environment variables though, e.g. 5c00a000.tamp@5c00a000:reboot-mode.of.param can't be set with hush, because of the special characters. It could still be read by using the ${variable} syntax though. Allow setting these variables by making the setenv command generally available. The default is chosen to be 'y', because the command is deemed small and useful enough to have it there by default. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: setenv: support setenv dev.var=VAL syntaxAhmad Fatoum2020-09-181-2/+10
| | | | | | | | | | | | In preparation for making setenv selectable under CONFIG_SHELL_HUSH, allow a `setenv dev.var=VAL syntax`: - makes command use less surprising for hush users - allows seamless integration with current device parameter complete While at it, propagate setenv's return code to the calling shell. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands/*: Replace license and copyright boilerplate by SPDX identfiersUwe Kleine-König2020-04-271-16/+2
| | | | | | | | | | | | | While at it also drop references to the non-existing CREDITS file and do some small rearrangements for some uniform formatting. (SPDX-License-Identifier first, then copyright texts and then an empty line.) The advantage is that these specifiers are machine-parseable which helps license conformance. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Documentation: remove doxygen documentationSascha Hauer2014-06-261-13/+0
| | | | | | | The doxygen documentation is long outdated. Remove it. It will be replaced with sphinx based documentation later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: harmonize in-barebox documentationHolger Schurig2014-05-141-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does probably too much, but it's hard (and very cumbersome/time consuming) to break it out. What is does is this: * each command has one short description, e.g. "list MUX configuration" * made sure the short descriptions start lowercase * each command has one usage. That string contains just the options, e.g. "[-npn]". It's not part of the long help text. * that is, it doesn't say "[OPTIONS]" anymore, every usable option is listed by character in this (short) option string (the long description is in the long help text, as before) * help texts have been reworked, to make them - sometimes smaller - sometimes describe the options better - more often present themselves in a nicer format * all long help texts are now created with BUSYBOX_CMD_HELP_ macros, no more 'static const __maybe_unused char cmd_foobar_help[]' * made sure the long help texts starts uppercase * because cmdtp->name and cmdtp->opts together provide the new usage, all "Usage: foobar" texts have been removed from the long help texts * BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this is nicer in the source code * BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself * made sure no line gets longer than 77 characters * delibertely renamed cmdtp->usage, so that we can get compile-time errors (e.g. in out-of-tree modules that use register_command() * the 'help' command can now always emit the usage, even without compiled long help texts * 'help -v' gives a list of commands with their short description, this is similar like the old "help" command before my patchset * 'help -a' gives out help of all commands Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: group 'help' outputHolger Schurig2014-05-141-0/+1
| | | | | | | | | | | | | | | | | | | The old output of "help" was just producing a long list, that usually scrolled of the screen (even on a X11 terminal). This list is more compact, and also sorted by groups. The old output format (plus grouping) is now available with 'help -v'. Example: Information commands: ?, devinfo, help, iomem, meminfo, version Boot commands: boot, bootm, go, loadb, loads, loadx, loady, saves, uimage ... Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Treewide: remove address of the Free Software FoundationSascha Hauer2012-09-171-3/+0
| | | | | | | The FSF address has changed in the past. Instead of updating it each time the address changes, just drop it completely treewide. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: remove struct command pointer from commandsSascha Hauer2012-02-271-1/+1
| | | | | | This is unused in all commands and thus can be removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* doc: unify documentation for 'setenv'Robert Schwebel2010-11-021-17/+13
| | | | Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* remove typedef cmd_tbl_t and replace it with struct commandSascha Hauer2010-02-011-1/+1
| | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* rename U-Boot-v2 project to bareboxSascha Hauer2009-12-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | This has been done with the following script: find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \ -e 's/u2boot/barebox/g' \ -e 's/U2Boot/barebox/g' \ -e 's/U-boot V2/barebox/g' \ -e 's/u-boot v2/barebox/g' \ -e 's/U-Boot V2/barebox/g' \ -e 's/U-Boot-v2/barebox/g' \ -e 's/U_BOOT/BAREBOX/g' \ -e 's/UBOOT/BAREBOX/g' \ -e 's/uboot/barebox/g' \ -e 's/u-boot/barebox/g' \ -e 's/u_boot/barebox/g' \ -e 's/U-Boot/barebox/g' \ -e 's/U-boot/barebox/g' \ -e 's/U-BOOT/barebox/g' find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \ xargs -0 -r rename 's/u[-_]?boot/barebox/' It needs some manual fixup following in the next patch Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: remove maxargsSascha Hauer2009-10-191-1/+0
| | | | | | | No need to check for maximum argument counts. The commands are safe to be called with more arguments, so lets safe some bytes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: return COMMAND_ERROR_USAGESascha Hauer2009-10-191-4/+2
| | | | | | | instead of calling u_boot_cmd_usage in each command to safe space. Signed-off-by: Sascha Hauer <sha@pengutronix.de>
* Subject: [PATCH] [general] Fixed constant strings in data section issueSascha Hauer2008-04-041-5/+8
| | | | | | | | For practical reasons I changed all string literals assumed to be constant to reside in .rodata subsection at end of .text section. Signed-off-by: Carsten Schlote <schlote@vahanus.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* separating environment commands, part 1Juergen Beisert2007-11-121-0/+64
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-30 19:10:48 +0000