| Commit message (Collapse) | Author | Age | Files | Lines |
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Based on Linux commit 8636a1f9677db4f883f29a072f401303acfc2edd
This will be needed when you sync Kconfig with Linux 5.0 or later.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
| |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
i2c is used in SPD EEPROMs and thus needed very early before barebox is
up. This patch adds a i.MX i2c driver variant for use in PBL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
We'll add a stripped down driver variant for use in PBL. To share the
register defines add a header file for them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
We speed up the clock frequency only if probed via platform_data.
Additionally honour the "clock-frequency" property.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
| |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
Following the Linux driver the controller should be stopped in the
read transfer path only after the last transfer of a message, but
not when other transfers of the same message are following. Implement
this behaviour for the barebox driver aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
We poll for different bits in the status register in different
functions. Instead of repeating the polling loops each time create
a helper function for it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
| |
dev_dbg is a no-op when debugging is disabled, so no need for extra ifdefs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
4ed5b77 ("i.MX: i2c: Add Vybrid support") introduced regshifts for the
register offsets, but missed to adjust the register offset for the
FSL_I2C_DFSRR register (which exists only on PowerPC). Fix this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
| |
No need to put the of_compatible field into ifdefs, remove them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
| |
No need for a define which is used only once.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
i2c_fsl_write() and i2c_fsl_read() take exactly one i2c message, not
multiple ones, hence rename the variable from "msgs" to "msg".
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
We have to write to FSL_I2C_I2DR and wait for completion/ack three
times in the code. Instead of open coding it each time create a
helper function for it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
We can track the stopped status in the I2CR_MSTA bit, no need for an
extra variable. Also we can call i2c_fsl_stop() instead of open coding
it in i2c_fsl_read().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
Move disabling of the controller out of i2c_fsl_stop(). This makes the
function reusable in other places in the next patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
In i2c_fsl_stop() we call i2c_fsl_bus_busy() a second time when it
fails. If it fails once it won't succeed the second time, so drop
the second call.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| | |
Introduce dev_set_name() in order to hide implementation details of
setting device's name so it'd be easier to change it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
| |
Add macro and dependency to avoid boilerplate code. Since now simple
i2c drivers only have to include the i2c.h header and call the
device_i2c_driver() macro to register a i2c device driver.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
Looks like that particular chunk of the code have not been built in a
while and bitrotted. Change function parameters appropriately to avoid
breaking the build.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
get_drv_data(..., &data->type) overwrites memory beyond data->type member due
to mismatch of sizeof(enum pca_type) and sizeof(void *) on 64 bit systems.
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
Leaving the flags field unitialized can lead to performing
read operation instead of write operation.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When using the barebox commands i2c_read or i2c_write the client pointer
passed to the respective function isn't completely initialized. This
makes
dev_dbg(&client->dev, ...);
choke as it dereferences client->dev.driver->name with
client->dev.driver being a random value.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
| |
Newer designware i2c controllers allow setting the SDA hold time.
Evaluate the devicetree property "i2c-sda-hold-time" and set the
value accordingly.
The code is an adaption of the Linux v4.12 driver.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
This prevents barebox hanging e.g. in case the i2c clock is accidentally
connected to GND.
Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The patch fixes this compiler's warning:
drivers/i2c/busses/i2c-mv64xxx.c: In function ‘mv64xxx_i2c_fsm’:
drivers/i2c/busses/i2c-mv64xxx.c:303:3: warning: this ‘if’ clause does
not guard... [-Wmisleading-indentation]
if (drv_data->bytes_left == 1)
^~
drivers/i2c/busses/i2c-mv64xxx.c:305:4: note: ...this statement, but the
latter is misleadingly indented as if it is guarded by the ‘if’
udelay(2);
^~~~~~
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Two nested while loops are not necessary here, so integrate the read,
i2c_fsm and i2c_do_action calls into mv64xxx_i2c_wait_for_completion()
and remove the obsolete interrupt remains.
Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
As stated in Marvell's Functional Specifications in MV-S107021-U0 Rev. A
on page 420 ff. software delays are needed. "SW delay represent a delay
of at least 2 internal clock cycles". These delays are hereby
implemented.
The original kernel driver compensates the needed software delays with
the time the interrupts take.
Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
|
| |
With commit 4ed5b778a56b ("i.MX: i2c: Add Vybrid support") i2c-fsl probe
returns -EINVAL for all non-OF boards.
Since newer planforms, especially vf610 are restricted OF-only it is safe to
assume "fsl,imx21-i2c" if CONFIG_OFDEVICE is not set.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
| |
For architectures which do not enable all clocks during initialization.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Use read/write adapter functions instead of directly calling to
readb/writeb. This is needed to prepare driver code to support Vybrid
SoC's variant of this block.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| |/
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Most recent device tree binding for that mux support specifying a GPIO
connected to a reset line of that chip. Add code to handle that binding
in order to be able to use the chip on boards that leverage
aforementioned functionality.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| | |
While being a bit more random this helps dt setups where the id of a
platform device cannot easily be fixed anyhow.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
|
|
|
| |
Instead of using gpio_is_valid just check the return code of of_get_gpio
for being < 0. This fixes -EPROBE_DEFER handling as now this error code
is handed to the caller instead of -ENODEV. If the gpio returned by
of_get_gpio is an invalid number this isn't noticed by
of_i2c_gpio_probe, but then gpio_request later fails which is good
enough.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.
This patch has been generated with the following semantic patch:
// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
- return PTR_ERR(io);
-}
+ return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
- return PTR_ERR(io);
-}
+ return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
- ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+ ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+ return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}
@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
dev_request_mem_region returns an ERR_PTR, fix places which check for a
NULL pointer instead. This patch has been generated with this semantic
patch, written by me and improved by Andrey Smirnov:
// <smpl>
@@
expression e;
expression e1;
@@
e = dev_request_mem_region(...);
...
-if (!e)
- return e1;
+if (IS_ERR(e))
+ return PTR_ERR(e);
@ rule1 @
expression e;
@@
e = dev_request_mem_region(...);
@@
expression rule1.e;
identifier ret, label;
constant errno;
@@
if (!e) {
...
(
- ret = -errno;
+ ret = PTR_ERR(e);
...
goto label;
|
- return -errno;
+ return PTR_ERR(e);
)
}
@depends on rule1@
expression rule1.e;
@@
- if (e == NULL)
+ if (IS_ERR(e))
{
...
}
// </smpl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
Useful bit of information. Example:
barebox:/ devinfo dummy0
Bus: i2c
Address: 0x52
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
| |
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
| |
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
| |
This can be used by the i2c_probe command to iterate over i2c adapters.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
Driver's private data structure is allocated with kzalloc without any
code to check for kzalloc's possible failure. Fix that by replaceing
kzalloc with xzalloc.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
| |
Add a driver for DesignWare I2C controller IP block found on several
SoCs including Altera SoC products
Tested using Terrasic SoCKit board and GPIO expander board with I2C
EEPROM on it
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
Useful for recovering busses. This needs additional device tree properties
describing the sda/scl gpios. The corresponding linux patch with the binding
description is currently under review.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|