| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Now that there are no longer any users of regmap.h in headers, let's
switch all users in the source files to linux/regmap.h.
That way, the only users of regmap.h whether directly or indirectly will
be out-of-tree code, which will fail with an error if they are dependent
on the old semantics of regmap_bulk_read and regmap_bulk_write.
After a transitory period, we can then drop regmap.h.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.barebox.org/20231020071853.2826528-12-a.fatoum@pengutronix.de
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The '_d' suffix was originally introduced in case we want to import
Linux struct device as a separate struct into barebox. Over time it
became clear that this won't happen, instead barebox struct device_d
is basically the same as Linux struct device. Rename the struct name
accordingly to make porting Linux code easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.barebox.org/20221214123512.189688-3-s.hauer@pengutronix.de
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
|
|
|
|
|
| |
"GPL-2.0-only" was introduced in SPDX 2.0, and the old identifier
"GPL-2.0" is now considered deprecated; see <https://spdx.org/licenses>.
Fixes: 28f4a6a4df76f0f1581d (2021-10-30, "drivers: add missing SPDX-License-Identifier")
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Link: https://lore.barebox.org/20211117113851.2022669-2-rhi@pengutronix.de
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
|
|
|
|
| |
strerrorp() is only used along with printf. We now have a format
specifier for printing error pointers directly, so use that and
remove strerrorp.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
|
| |
Fixes: efd517c35f12 (mfd: add basic Super I/O chip helpers)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
|
|
|
|
|
| |
Apparently, we have a helper for strerror(-PTR_ERR(regmap)). Use it.
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
Super I/O chips are ICs common to x86 that are used for interfacing
to low-bandwidth peripherals. They often contain serial ports, watchdog
timers and hardware monitoring units.
They are usually addressable via one of two I/O port pairs, either
0x2e-0x2f or 0x4e-0x4f, but they don't typically respond to reads from
their range unless a device-specific 'password' has been poked in.
After this is done, they are read and written in the same manner however.
On Linux, these devices aren't subject to any device/driver model.
Each driver for some function (e.g. watchdog or GPIO) duplicates the
device probe in the module_init and board-specific configuration
is handled via module parameters.
Lets do it a bit fancier in barebox and add a helper to register chips
and a regmap for the control and configuration registers as well as a
helper to register child devices for each function contained within the
Super I/O chip.
Board-specific configuration, e.g. which pin to use as a watchdog reset,
can then be realized using barebox device-specific parameters.
The regmap will be more of a debugging aid, however.
For ease of porting from Linux, it's expected that access to the
I/O ports won't happen via the regmap. For this reason, the new
<superio.h> header offers functions to read/write these chips' registers
as well.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
