| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
| |
When we call regmap_init, the regmap is associated with the device
supplied and can be queried with dev_get_regmap. This is more natural
than expecting cell drivers to cast dev->parent->priv. Do it.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
This is an adaptation of the Linux v5.3 f71808e_wdt driver for the watchdog
component of the Fintek Super I/O chips.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| | |
The driver adds support for the PMIC's watchdog, reset, poweroff
and reset reason query capabilities.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
|
|
|
| |
The semantic of reset_source_set_instance() required a separate call to
reset_source_set() (or reset_source_set_priority()) and checked right
usage only using the type. Make the set of functions a bit easier to use
by dropping reset_source_set_instance() and instead introduce a function
that can set all relevant parameters (source, priority and instance) in
one go.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
The reset reason part of the code is based on the i.MX6's and duplicated
a comment from there, which isn't applicable to the STM32. Delete it.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
| |
The driver supports setting watchdog timeout, system reset
and querying reset reason. Disabling watchdog isn't possible
in hardware, thus users should either only enable it before
boot or have the poller take care of feeding it.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
Layerscape SoCs feature the same watchdog as the i.MX SoCs, but in big
endian mode. Add support for it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
| |
In preparation of adding big endian support in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| | |
BCM2835 watchdog timeout can be set to maximum 15 seconds (0xffffff >> 16).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| |/
| |
| |
| |
| |
| |
| | |
make it properly represented by menuconfig
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
| |
This driver is using SetWatchdogTimer() UEFI interface and was
tested on iBASE MI991AF Mini-ITX motherboard.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On i.MX6 when the watchdog has resetted the system then the SRSR
register correctly shows that the watchdog has resetted the system.
This is not the desired result though, a "reset" in barebox or "reboot"
in Linux should result in "RST" as reset source. So instead of making
the SRSR register value overwrite the reset source read from the
watchdog registers, interpret the SRSR value corresponding to watchdog
reset as "lookup details in the watchdog registers".
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
|
|
|
|
|
|
|
|
| |
Introduce dev_set_name() in order to hide implementation details of
setting device's name so it'd be easier to change it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
RAVE SP firmware versions found on RDU2 provide decicated bootsource
manipulation commands, which, under the hood, are just thin wrappers
around write/read to a particular location in EEPROM.
Unfortunately, RAVE SP firmware found on RDU1, does not provide any
dedicated bootsource commands and its users are expected to access
EEPROM directly.
In order to avoid having separate code paths for handling those two
cases, convert the code to access EEPROM directly via NVMEM API.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
This code should've been removed when the driver was rebased against
latest watchdog plumbing in Barebox.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| | |
Port RAVE SP watchdog driver from Linux kernel
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Since watchdog_register access to hwdev (see
commit 65a644388e845bde01215bf378d4df2a6a260a6a)
hwdev has to be initiate/set before calling watchdog_register.
Signed-off-by: Andreas Schmidt <mail@schmidt-andreas.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
| |
Avoid null pointer access, if hwdev was not
set before call watchdog_register.
Signed-off-by: Andreas Schmidt <mail@schmidt-andreas.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
| |
In some cases it is practical to supervise as much as possible of
the barebox execution with a watchdog (or multiple watchdogs). This
patch provides an async poller for watchdog core framework which can
be enabled by the user and stores this configuration to nv.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
| |
timeout_cur will be used for watchdog poller.
Provided values should be good enough for most users
and still can be changed for separate projects and
fit to needed requirements.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
Some drivers do not provide timeout_max value.
Using some value is probably better then setting timeout_max to 0.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
this also will be needed for watchdog poller as well
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
| |
the watchdog hwdev is usually named with devicetree schema
which is not practical for CLI.
On device registration "wdog" will be extended with some index number
extracted from devicetree (if awailable) or automatically assigned
first available number. End result will be "wdog0" .. etc.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
| |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
Move out of architecture code and add some real watchdog functionality.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
This driver was developed and tested on QCA AR9344 WiSoC
but it may work on most known Atheros/QCA WiSoCs.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
From earlier SoCs like the i.MX21 up to i.MX7 their datasheets states
after reset the watchdog timer has to be set first prior enabling the
watchdog itself. This change do it this way.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
|
|
|
| |
According to the Errata ERR004346 (WDOG: WDOG SRS bit requires to be written
twice), add another two writes to ensure there must be at least two
writes happen in the same one 32kHz clock period.
Without this two additional writes, the system will not reset always.
Tested with i.MX6Quad and i.MX6 UltraLite
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
| |
This SoC uses a variant of the IP that is also used on most other
Marvell SoCs. For now it only supports Armada XP but the naming is
already chosen such that adding support for further SoCs doesn't result
in much renaming.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
| |
The watchdog can either reset only the SoC or assert the WDOG_B
output signal instead. On some boards it's necessary to use the
external WDOG_B output to make sure that external devices like the
PMIC are also properly resetted. This has been fixed in the Linux
driver which honours a fsl,ext-reset-output device tree property
to select between both ways. Do the same in the barebox driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
On i.MX21 watchdog type the reset operation is really different
from the watchdog enable/set timeout operation, so create an
extra callback for this instead of folding both things together.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
Port the linux v4.8-rc1 Synopsys DesignWare watchdog driver to barebox.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.
This patch has been generated with the following semantic patch:
// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
- return PTR_ERR(io);
-}
+ return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
- return PTR_ERR(io);
-}
+ return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
- ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+ ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+ return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}
@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
dev_request_mem_region returns an ERR_PTR, fix places which check for a
NULL pointer instead. This patch has been generated with this semantic
patch, written by me and improved by Andrey Smirnov:
// <smpl>
@@
expression e;
expression e1;
@@
e = dev_request_mem_region(...);
...
-if (!e)
- return e1;
+if (IS_ERR(e))
+ return PTR_ERR(e);
@ rule1 @
expression e;
@@
e = dev_request_mem_region(...);
@@
expression rule1.e;
identifier ret, label;
constant errno;
@@
if (!e) {
...
(
- ret = -errno;
+ ret = PTR_ERR(e);
...
goto label;
|
- return -errno;
+ return PTR_ERR(e);
)
}
@depends on rule1@
expression rule1.e;
@@
- if (e == NULL)
+ if (IS_ERR(e))
{
...
}
// </smpl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add support for OMAP Watchdog driver.
Based on omap_wdt Linux driver (v4.3-rc1).
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
| |
The i.MX21/i.MX6 watchdog cannot be disabled after it was activated.
Bit 2 (WDE) cannot be set to 0 again. Notify the user about that by
returning -ENOSYS.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
This adds a dev and name member to struct watchdog which helps distinguishing
between different watchdogs. Also add some debugging aids.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
Put watchdogs on a list to allow multiple watchdogs. Add a priority
field to be able to pick the highest priority watchdog.
This patch also provides a of_get_watchdog_priority() function to
allow configuring the watchdog priority from the device tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This replaces the reset_cpu() function which every SoC or board must
provide with registered handlers. This makes it possible to have multiple
reset functions for boards which have multiple ways to reset the machine.
Also boards which have no way at all to reset the machine no longer
have to provide a dummy reset_cpu() function.
The problem this solves is that some machines have external PMICs or
similar to reset the system which have to be preferred over the
internal SoC reset, because the PMIC can reset not only the SoC but also
the external devices.
To pick the right way to reset a machine each handler has a priority. The
default priority is 100 and all currently existing restart handlers are
registered with this priority. of_get_restart_priority() allows to retrieve
the priority from the device tree which makes it possible for boards to
give certain restart handlers a higher priority in order to use this one
instead of the default one.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
The imxwd is for resetting the system, so we should not unregister it
during shutdown_barebox() as it may leave us without a restart handler.
Only a bug (not setting reset_wd to NULL in remove()) made the whole
thing work.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
This driver is based on the Linux driver (v4.0).
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since 2011 barebox' of_device_id struct uses unsigned long type for data field:
struct of_device_id {
char *compatible;
unsigned long data;
};
Almost always struct of_device_id.data field are used as pointer
and need 'unsigned long' casting.
E.g. see 'git grep -A 4 of_device_id drivers/' output:
drivers/ata/sata-imx.c:static __maybe_unused struct of_device_id imx_sata_dt_ids[] = {
drivers/ata/sata-imx.c- {
drivers/ata/sata-imx.c- .compatible = "fsl,imx6q-ahci",
drivers/ata/sata-imx.c- .data = (unsigned long)&data_imx6,
drivers/ata/sata-imx.c- }, {
Here is of_device_id struct in linux kernel v4.0:
struct of_device_id {
char name[32];
char type[32];
char compatible[128];
const void *data;
};
Changing of_device_id.data type to 'const void *data' will increase
barebox' linux kernel compatibility and decrease number of 'unsigned
long' casts.
Part of the patch was done using the 'coccinelle' tool with the
following semantic patch:
@rule1@
identifier dev;
identifier type;
identifier func;
@@
func(...) {
<...
- dev_get_drvdata(dev, (unsigned long *)&type)
+ dev_get_drvdata(dev, (const void **)&type)
...>
}
@rule2@
identifier dev;
identifier type;
identifier func;
identifier data;
@@
func(...) {
<...
- dev_get_drvdata(dev, (unsigned long *)&type->data)
+ dev_get_drvdata(dev, (const void **)&type->data)
...>
}
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
Disable the watchdog powerdown counter at start. Otherwise this may
trigger a reset or poweroff over the WDOG_B line to a PMIC. This counter
is set to 16 seconds after poweron.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
| |
Replace the set_timeout function in the device platform data by an ops
struct which stores a set_timeout and init function.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|