| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The bit MX25_H1_PM_BIT value is handled for port 1 as MX25_OTG_PM_BIT is
for port 0. The latter is called "OPM: OTG power mask" in the i.MX25
reference manual. Its description matches the description of "HPM: Host
power mask" for the host port which is bit 16, not 8.
The Linux kernel (as of 4.3) also has
#define MX25_H1_PM_BIT BIT(16)
.
Fixes: a4076ddf6577 ("USB i.MX: Add chipidea driver support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| | |
The USB core will make sure we do not re-enter the ehci driver, so
we can use regular mdelay instead of mdelay_non_interruptible().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| | |
Now that the USB core makes sure that we do not re-enter USB
drivers we no longer have to detect re-entrancy in the ehci driver.
This reverts commit 8426cc641dbd9c4e948ae4b5f3f89463e969eb1e.
|
| |
| |
| |
| |
| |
| |
| |
| | |
Now that the USB core makes sure that we do not re-enter USB
drivers we no longer need mdelay_non_interruptible() but can use
regular mdelay() again.
This reverts commit 4cfd909412e6ecfcef21c1ffabc8d515b39a0f85.
|
| |
| |
| |
| |
| | |
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| | |
Skip poll if either usb_submit_int_msg() or usb_get_report()
returned -EAGAIN.
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| |/
| |
| |
| |
| |
| |
| |
| |
| | |
It may take some time for PHY to indicate link OK status after
autonegotiation completed. This change addresses this case
and prevent network commands fails due to the delay.
Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Marvell NETA Network Engine found in Armada 370 and XP SoCs
also has a different compatible for Armada XP. Add the compatible
to the of_device_id list.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Newer Marvell MVEBU SoC like Armada 370/XP have an additional core
clock divider for e.g. NAND clock. Add the corresponding driver based
on the Linux driver.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Resolution can't be changed anyway once fb_enable() has been called,
since no corresponding fb_disable() call appears in the code.
Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Console enable -> alloc shadowfb.
Console disable -> free shadowfb.
Otherwise, if resolution gets changed, shadowfb will not be affected.
Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The version is stored as BCD, e.g. 0x40 -> ".4" and 0x41 -> ".41".
The latter was getting printed as ".65". Simplify the logic a bit to
not split the minor into nybbles just to re-assemble it into a byte
again.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |/
| |/|
| | |
| | |
| | |
| | |
| | |
| | | |
The id check does not work on some newer drives.
Acked-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| |/ /
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
remap_range is for remapping regions with different cache attributes.
It is implemented for ARM and PowerPC only, the other architectures only
provide stubs.
Currently the new cache attributes are passed in an architecture specific
way and the attributes have to be retrieved by calls to
mmu_get_pte_cached_flags() and mmu_get_pte_uncached_flags().
Make this simpler by providing architecture independent flags which can
be directly passed to remap_range()
Also provide a MAP_ARCH_DEFAULT flag and a arch_can_remap() function.
The MAP_ARCH_DEFAULT defaults to whatever caching type the architecture
has as default. the arch_can_remap() function returns true if the
architecture can change the cache attributes, false otherwise. This
allows the memtest code to better find out what it has to do.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | |/
| |/|
| | |
| | | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |/
|/|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Currently we get a null pointer dereference when booting linux on RPi
which use "uart-pl011" driver. This driver doesn't implement a remove
driver callback. This patch adds a check before calling the remove
callback if the driver which use the amba bus implement such
functionality.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Fixes:
In function `simple_panel_ioctl':
undefined reference to `of_get_display_timings'
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| | |
It causes build failures on other arches than socfpga and the driver
doesn't use anything provided by this header.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
| |
Fixes:
In function `usb_kbd_probe':
(usb_kbd_probe): undefined reference to `console_set_active'
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
In drivers/usb/core/usb.c we already have le16_to_cpus() conversion
just after usb_get_descriptor():
390 /* correct le values */
391 le16_to_cpus(&dev->descriptor->bcdUSB);
392 le16_to_cpus(&dev->descriptor->idVendor);
393 le16_to_cpus(&dev->descriptor->idProduct);
394 le16_to_cpus(&dev->descriptor->bcdDevice);
so no additional idVendor/idProduct descriptor fields
le16_to_cpu() conversion is needed after that.
On the big-endian machines extra le16_to_cpu() conversion
leads to wrong idVendor/idProduct USB device parameters values
(e.g. see devinfo <usb-device> output), and to a much more
serious problem: idVendor/idProduct-based USB device detection
does not work.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| | |
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| | |
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| | |
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| | |
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The host may assume that the usb device is still up and running after
booting if we do not deregister the udc here. I observed issues when the
linux kernel was using a usb gadget directly where the complete USB Hub
got disconnected through this.
This patch adds a proper USB disconnect for gadget devices.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Use is_timeout_non_interruptible() intead of is_timeout()
to avoid re-entering ehci-hcd functions from pollers,
registered by usb drivers.
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| | |
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
See the commit
commit 245069bcef15ecc19db616a967501349b76c84d0
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu Jul 10 11:36:12 2014 +0200
USB: introduce usb_interface/usb_configuration structs
On little endian systems like ARM the le16_to_cpus() macro
is a no op, defined as:
#define le16_to_cpus __le16_to_cpus
#define __le16_to_cpus(x) do {} while (0)
So struct usb_configuration field misuse was discovered
on big-endian MIPS machine.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
A read id operation followed by 0x00 reads the device ID while
a read id operation followed by 0x20 reads the possible ONFI identifier.
As the READID function did not propagate the second id parameter but had
a hard-coded call for 0x90 0x00, reading the ONFI identifier was not
possible and thus chips werde not detected (tested with
MT29F8G08ABABAWP)
Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The driver is based on the denali driver from the linux kernel
Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This one is available in the kernel and used by the denali driver
Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
As regmap is not used in Barebox we can remove this field
from the imx_hdmi struct.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
putting an error pointer into strerror can be a bit confusing since
strerror takes a positive error code but PTR_ERR returns a negative
number, so we have to do strerror(-PTR_ERR(errp)). Some places got
this wrong already, so introduce a strerrorp function which directly
takes an error pointer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
'usb_stor_Bulk_clear_endpt_stall'
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
HDMI support is not generally useful without EDID support.
Fixes:
In function `imx_hdmi_ioctl':
undefined reference to `edid_read_i2c'
undefined reference to `edid_to_display_timings'
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
VPL uses the of_graph bindings, which are only available if OFTREE
support is compiled in.
Also fix the drivers using VPL to depend on OFTREE.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |/
| |/|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Spansion S25FL204K is a 4-Mbit 3.0V Serial Flash Memory
with Uniform 4 kB Sectors.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | |/
| |/|
| | |
| | |
| | |
| | |
| | | |
This driver is based on linux-4.2 driver.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|