| Commit message (Collapse) | Author | Age | Files | Lines |
|\ |
|
| |
| |
| |
| | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| | |
The rx buffers must be given to the device initially to work properly.
Otherwise the first packets are corrupted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
fsl_ddr_set_memctl_regs() is not only used internally in the DDR
controller driver, but can also be called by the boards to configure
a static setting. Move the prototype to include/ where it can be
used by board code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| | |
MMC Frequency was set to something like 55MHz. This doesn't work for all
SD cards. Set to 25MHz which is supported by all SD cards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Currently we get a nasty error message if the cpu clock can't be
changed:
DDRC is clocked by PLL1, can't switch CPU clockinitcall vf610_switch_cpu_clock+0x1/0x198 failed: Invalid argument
So let's do the following:
- factor out the check from vf610_switch_cpu_clock_to_500mhz() and
vf610_switch_cpu_clock_to_400mhz
- if clock can't be changed, don't treat it as an error
- don't call clock notifier chain if clock can't be changed
- add trailing newline to the warning message
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This 4MBit SPI chip can be found in Kindle Voyage devices
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This adds a RTC driver for the Freescale i.MX25. This is done more
to get access to the nonvolatile general purpose register than it
is done to read the clock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |/
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add some clocks needed for:
- RNGB
- SCC
- Dryice RTC
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The blobgen driver allows generating and reading of red blobs on the
i.MX6 CAAM crypto core.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The Security Controller (SCC) is found on (at least) i.MX25 SoCs.
It is not a crypto engine in the usual sense. The only supported
algorithm in hardware is 3DES and the key is not configurable, but
is fused in the hardware.
The SCC can be handed some block of data in the red memory space
and it will return the encrypted data in the black memory space and
vice versa.
The API for this driver are the functions
- mxc_scc_cbc_des_encrypt
- mxc_scc_cbc_des_decrypt
Along with this driver a blobgen implementation is provided.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
| |
rng_self_test.c doesn't include the header file providing the
prototypes for the functions it implements. Add the missing include.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
The caam driver needs the variable habv4_need_rng_software_self_test,
but this is only declared when HABV4 is enabled. Instead of exporting
a variable rather provide a function to test if a software selftest
of the random number generator is needed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When building for Cyclone5 SoCFPGA, the socfpga_a10_pll_init(),
socfpga_a10_perith_init() and socfpga_a10_gate_init() functions are
defined as dummy functions returning ERR_PTR(-ENOSYS). They are defined
with external linkage. With '-Wmissing-prototypes' GCC warns about
externally linked function definitions with no preceding prototype.
Define them as 'static inline' to avoid the compiler warnings.
(Note: Arria10 uses non-dummy versions of these functions declared
'extern' but defined elsewhere.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The ZynqMP has a platform management unit (PMU) that is responsible for
managing the clocks. Therefore, the clock driver uses the firmware
driver to control the clocks.
The Barebox driver is based on the Linux driver, but contains deviations
to make the driver more readable and more consistent.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The sub-nodes of "/firmware" are not populated, since it has no
"compatible" property. Copy the behavior of Linux and call
of_platform_populate() on the "/firmware" node to probe firmware
drivers.
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@wolfvision.net>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | | |
orion5x_2win_mbus_data__maybe_unused should be two words. Fix it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Many files in the tree implement functions, but do not include the
header files which provide the prototypes for these functions. This
means conflicting prototypes remain undetected. Add the missing
includes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Many functions are only used locally but still are globally visible.
Make these function static. Avoids warnings generated with -Wmissing-prototypes
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Usb_limit_blk_cnt() has only one user so we may as well inline it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Simplify I/O loop a bit, by re-arranging things and dropping
"sectors_done", "result" and "data" local variables.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Use simple boolean to speficy read vs. write operation
usb_stor_blk_io() instead of having a custom anonymous enum.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
There's only user of the to_usb_mass_storage() so we may as well
inline it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Checking that sector_count is zero, shouldn't be necessary since block
layer won't call this function if there's no data to be read. Drop it.
Checking that blockbits is eqal to SECTOR_SHIFT isn't necessary, since
that field is filled by the driver and is not changed outsied of
it. We know it is going to be SECTOR_SHIFT. Drop it.
Checking sector_start > (ulong)-1 doesn't make sense at all since
sector start is 'int' and it can't possibly be greater that
ULONG_MAX. Drop it.
Checking for sector_start >= pblk_dev->blk.num_blocks isn't necessary
either, since we shouldn't receive request for invalid read from block
layer. Drop it.
Ditto for sector_count > INT_MAX and sector_start + sector_count >
pblk_dev->blk.num_blocks.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
There are no users of usb_control_msg() in the codebase that pass
timeout of 0, so it doesn't look like usb_disable_asynch() has any
effect on USB operation. Drop that function and remove all of its uses
to simplify things.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Replace explicit endianness casts with put_unaligned_be* helpers.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Move retry logic found in all of the low-level usb_stor_* functions
into a standalone subroutine and convert the rest of the code to use
it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
There are no users of us_blkdev_list in the file. Drop it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Only bulk-only transport is supported by the currennt codebase, so
ep_bInterval and recv_intr_ep are not really used. Remove them and all
related code. While at it remove flags and subclass as well since they
are not really used anywhere in the codebase.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
No symbols found in <scsi.h> are used in this file. Drop it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
No symbols found in <scsi.h> are used in this file. Drop it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
All the info we need to pass to transport function can be captured in
a struct us_blk_dev and two byte arrays, so having a dedicated struct
with many unused fields doesn't really buy us anything. Drop the
struct and convert the rest of the code to pass needed data
explicitly.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Drop a number of variables no longer used in the code.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Don't try to re-use caller's "ccb" and instead convert
usb_stor_request_sense() to use its own for clarity and to allow
futher code improvements. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Both usb_stor_read_10() and usb_stor_write_10() do almost exactly the
same thing, so merge them into a signle routine and adjust all of the
users accordingly.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
There doesn't seem to be a particularly good reason to call
->trasport() one last time after 2 failures. Drop the call so allow
sharing this code with usb_stor_read_10() in the following commit.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Move special preparation steps done before the call to
usb_stor_write_10() inside the function itself for clarity and to
allow futher code improvements. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Move special preparation steps done before the call to
usb_stor_read_10() inside the function itself for clarity and to allow
futher code improvements. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Move special preparation steps done before the call to
usb_stor_test_unit_ready() inside the function itself for clarity and
to allow futher code improvements. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Move special preparation steps done before and after call to
usb_stor_inquiry() inside the function itself for clarity and to allow
futher code improvements. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Move special preparation steps done before and after call to
usb_stor_read_capacity() inside the function itself for clarity and to
allow futher code improvements. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Unsignled long will expand to 64-bit unsigned integer on 64-bit
CPUs. This will break current code using it to read out two 32-bit
values returned by READ_CAPACITY. Fix the proble by using "u32"
explicitly.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Replace custom debug tracing macros with a call to dev_dbg to simplify
code and add device info into degug output.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |/
| |/|
| | |
| | |
| | |
| | |
| | |
| | | |
Replace explicit malloc() + OOM check and memset() with a single call
to xzalloc().
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|