summaryrefslogtreecommitdiffstats
path: root/images
Commit message (Collapse)AuthorAgeFilesLines
* ARM: mx6sx-sabresdb: set proper hostnameLucas Stach2015-11-301-0/+10
| | | | | | | | Also move the initcall to the level matching the name of the function. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOMChristian Hemp2015-11-111-0/+5
| | | | | | | | | | | | | | Add Phytec phyCORE-i.MX6 SOM. - imx6dl-phytec-phycore-som-nand - 256GB RAM on 1 Bank with 32Bit - 10/100MBit Ethernet - NAND - SD - UART Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx6q: Add support for Phytec phyCORE-i.MX6 SOMChristian Hemp2015-11-091-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Add Phytec phyCORE-i.MX6 SOM. Support: - imx6q-phytec-phycore-som-nand: - 1GB RAM on 1 Bank with 64Bit - 1GBit Ethernet - SPI NOR - NAND - SD - UART - imx6q-phytec-phycore-som-emmc - 1GB RAM on 1 Bank with 64Bit - 1GBit Ethernet - SPI NOR - eMMC - SD - UART Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx6q: pfla02: add phyFLEX-i.MX6 DualLite 1GiB on one bankStefan Christ2015-11-091-0/+5
| | | | | | | Add support for phyFLEX-i.MX6 DualLite 1GiB on one bank with NOR. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx6dl: pfla02: Add support for 128MB and 256MB RAMStefan Christ2015-11-091-0/+10
| | | | | | | | Add support for phyFLEX-i.MX6 Solo with 128MB and 256MB RAM on one memory bank. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx6q: pfla02: Add support for 512MiB RAM on one bankStefan Christ2015-11-091-0/+5
| | | | | | | Add support for phyFLEX-i.MX6 Quad 512MiB RAM on one bank. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: pfla02: append suffix 1bankStefan Christ2015-11-091-8/+8
| | | | | | | | | | | | | | | | | | | | In the current naming schema the phyFLEX-i.MX6 variants which only use one bank for memory have the suffix "1bank". The variants which use two banks of memory have no suffix. The patch fixes the name of the phyFLEX-i.MX6 Solo variant with 512MiB on one bank. So the name of the image file changes from barebox-phytec-pbab01s-512mb.img barebox-phytec-phyboard-subra-512mb.img to barebox-phytec-pbab01s-512mb-1bank.img barebox-phytec-phyboard-subra-512mb-1bank.img This patch touches the phyFLEX-i.MX6 Kit variant and the phyBOARD-SUBRA-i.MX6 which shares the same phyFLEX-i.MX6 module. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* boards: Add phytec-som-imx6Stefan Christ2015-11-091-33/+33
| | | | | | | | | | | | | The main idea behind this patch is to avoid redundant code. Because of the module similarities of all i.MX6 based phytec boards, we can merge its code. The phytec-som-imx6 merges the code of all i.MX6 based phytec SOMs. So we will have only one "board" in the barebox for phyCARD-i.MX6 and phyFLEX-i.MX6. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: microsom: add full set of module variants on HummingboardLucas Stach2015-11-091-0/+15
| | | | | | | | Now that we have a full set of DRAM configuration entries we can build images for the full set of modules on Hummingboard. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: microsom: import DCD from SolidRun U-BootLucas Stach2015-11-091-1/+1
| | | | | | | | This is a complete set of DRAM configuration values for all of the MicroSOM variants extracted from SolidRun U-Boot. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: microsom: change barebox image name for HummingboardLucas Stach2015-11-091-4/+4
| | | | | | | | To reflect that the current image is in fact for a combination of a MicroSOM i1 with a Hummingboard baseboard. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/mvebu'Sascha Hauer2015-11-061-1/+1
|\
| * ARM: mvebu: Lenovo IX4 300D: Fix pblb generationSascha Hauer2015-10-191-1/+1
| | | | | | | | | | | | | | | | pblx-y must be passed the entry point function without any extension. Otherwise the pblb file is not added to $targets and is removed by make as an intermediate file. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/misc'Sascha Hauer2015-11-061-1/+17
|\ \
| * | Make list of flash images and fix link all single image casesTrent Piepho2015-10-271-1/+17
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a new file named 'barebox-flash-images' in the top level output directory that lists each image generated, one per line. Paths will be relative to the top level output directory. This works if multiple images are generated as well as for a single image. Also update the existing barebox-flash-image symlink to point to the image in all cases where there is a single image generated. If multiple images are generated, it will point to the non-existent file 'multi-image-build'. Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | images: Embedsky E9: use image name like the rest of boardsAnton Bondarenko2015-11-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Use name similar to other boards thus remove freescale from image name since this is not a Freescale board, move SoC type after company name. So image name changed from barebox-freescale-imx6q-embedsky-e9.img to barebox-embedsky-imx6q-e9.img Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: i.MX6: add Technexion Wandboard supportMichael Grzeschik2015-10-271-0/+5
|/ | | | | | | | | | This adds support support for the i.MX6 Technexion Wandboard. The board comes in different SoC variants and different amounts of RAM. The baord type is autodetected based on the SoC type, so all boards can be supported by the same binary image. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* images: ignore *.imx-sram-imgStefan Christ2015-09-211-0/+1
| | | | | | | | | | Add pattern to gitignore to hide files: start_imx6_cm_fx6.imx-sram-img start_imx6_utilite.imx-sram-img Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/vincell'Sascha Hauer2015-08-071-0/+10
|\
| * ARM: vincell: move to DT probingSteffen Trumtrar2015-07-131-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | This enabled multi image support for the Garz&Fricke Vincell board. Also it adds the Vincell-LT as a second image with a separate device tree. Previously we used the same image on both the Vincell and the Vincell-LT image since the differences are not that significant for barebox. Still this was good for quite some confusion internally, so let's properly introduce a second image. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/imx'Sascha Hauer2015-08-061-0/+21
|\ \
| * | ARM: initial cm-fx6 supportSascha Hauer2015-07-311-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | The cm-fx6 board is a module from Compulab with different i.MX6 SoCs. This module is also found in the Utilite Mini Computer this patch also adds support for. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | images: i.MX: Create target for SRAM imagesSascha Hauer2015-07-161-0/+11
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Some boards like to do their SDRAM setup in code rather than in hardcoded DCD tables. For these boards the bootloader has to be loaded to the internal SRAM which is often too small for a full featured barebox. This new SRAM image type target allows to overcome this limitation. The image created with the new imx-sram-img rule is a regular imx-image with the difference that the load size only spans the pblx image and not the whole image including the payload. The pbl image easily fits into SRAM. The strategy is that this initial code initializes the SDRAM, loads the whole image to SDRAM and jumps to it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: dts: Add support for all phyFLEX-AM335x optionsTeresa Remmet2015-07-201-0/+12
| | | | | | | | | | | | | | Add support for all possible combinations of phyFLEX-AM335x modules. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: dts: Add support for all phyCORE-AM335x optionsTeresa Remmet2015-07-201-0/+8
| | | | | | | | | | | | | | | | Add support for all possible combinations of phyCORE-AM335x modules. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: phytec-som-am335x: Add support for 1024MiB RAM on one chipTeresa Remmet2015-07-201-0/+6
|/ | | | | | | Added support for IM8G16D3FBBG15EI 1024MiB RAM on one chip. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/omap'Sascha Hauer2015-07-032-0/+20
|\ | | | | | | | | Conflicts: arch/arm/boards/beagle/board.c
| * ARM: beagleboard: Move to multiimage supportSascha Hauer2015-07-022-0/+20
| | | | | | | | | | | | | | | | | | | | Breathe some life back into the beagleboard: - switch to multiimage support - update config - initialize early UART for debugging Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/misc'Sascha Hauer2015-07-031-0/+2
|\ \
| * | images: Add file size check for PBLX filesWadim Egorov2015-06-261-0/+2
| |/ | | | | | | | | Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* / image: am335x: Generate SPI MLO imagesWadim Egorov2015-06-101-0/+28
|/ | | | | | | Generate *.spi.img files for SPI loading on AM335x. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* i.MX: Add provisions to boot from IRAMAndrey Smirnov2015-05-071-1/+19
| | | | | | | | | | | | | This commit add a very basic code to allow Barebox to be booted from IRAM. Given that the amount of IRAM on most i.MX variants is insufficient to contain a copy of Barebox with any reasonable degree of functionality this code uses IRAM only as a temporary location and eventually bootstraps from DRAM. But the presense of the intermediate IRAM-only stage allows to add provisions to test the area of DRAM that Barebox would be using to facilitate various testing scenarious. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/mvebu'Sascha Hauer2015-05-061-10/+21
|\
| * ARM: mvebu: armada-xp: Add Lenovo Iomega ix4-300dSebastian Hesselbarth2015-04-271-0/+11
| | | | | | | | | | | | | | | | This adds support for Marvell Armada XP based 4-bay NAS Lenovo Iomega ix4-300d. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: mvebu: armada-xp: Sort boards and images alphabeticallySebastian Hesselbarth2015-04-271-11/+11
| | | | | | | | | | | | | | | | Before adding new Armada XP based boards becomes messier than necessary, sort Armada XP based board Kconfig and image Makefile alphabetically. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | images: add HABv4 support for i.MX6Marc Kleine-Budde2015-04-153-1/+52
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds high assurance boot support (HABv4) image generation to barebox, currently tested on i.MX6 only. In order to build a signed barebox image, add a new image target to images/Makefile.imx as illustrated in the diff below: - - - a/images/Makefile.imx + + + b/images/Makefile.imx @@ -163,10 +163,14 @@ image-$(CONFIG_MACH_SABRELITE) += barebox-freescale-imx6dl-sabrelite.img pblx-$(CONFIG_MACH_SABRESD) += start_imx6q_sabresd CFG_start_imx6q_sabresd.pblx.imximg = $(board)/freescale-mx6-sabresd/flash-header-mx6-sabresd.imxcfg FILE_barebox-freescale-imx6q-sabresd.img = start_imx6q_sabresd.pblx.imximg image-$(CONFIG_MACH_SABRESD) += barebox-freescale-imx6q-sabresd.img +CSF_start_imx6q_sabresd.pblx.imximg = $(havb4_imx6csf) +FILE_barebox-freescale-imx6q-sabresd-signed.img = start_imx6q_sabresd.pblx.imximg.signed +image-$(CONFIG_MACH_SABRESD) += barebox-freescale-imx6q-sabresd-signed.img + Here the default i.MX6 CSF file $(havb4_imx6csf) is used, it's generated during build on from the template "scripts/habv4/habv4-imx6.csf.in". You can configure the paths to the SRK table and certificates via: System Type -> i.MX specific settings -> HABv4 support. The proprietary tool "cst" by Freescale tool is expected in the PATH. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/misc'Sascha Hauer2015-04-136-17/+11
|\
| * images: fix Tegra out-of-tree buildLucas Stach2015-03-092-8/+9
| | | | | | | | | | | | | | | | | | The BCTs are build objects and as such are located in the objtree instead of the srctree. Fix out-of-tree build by defining a variable which refers to the board directories in the objtree and use it for Tegra. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * images: move board variable to parent makefileLucas Stach2015-03-096-9/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | A lot of the image makefiles define an equal board variable, which gives the impression that this variable is unique for this makefile. As those files aren't freestanding makefiles but get included into a parent makefile this is not actually true. Attempts to override this variable will not work reliable as make is picking up a random instance. Fix this confusion by moving this variable out of the individual makefiles. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | images: mxs: remove not used PREP_ definitionsMarc Kleine-Budde2015-04-031-4/+0
| | | | | | | | | | Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: Add ELTEC HiPerCam board supportSascha Hauer2015-03-201-0/+5
|/ | | | | | | | | This adds support for the i.MX6 based Eltec HiPerCam board. This board comes with different i.MX6 flavours and different memory sizes. Currently supported is the i.MX6dl version with 256MB DDR3 RAM. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/socfpga'Sascha Hauer2015-03-091-0/+8
|\
| * ARM: socfpga: add Altera SoCFPGA Development Kit supportSteffen Trumtrar2015-03-021-0/+8
| | | | | | | | | | | | | | | | Add support for the Altera SoCFPGA Development Kit. The setup is based on the GHRD from Altera. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/misc'Sascha Hauer2015-03-091-1/+1
|\ \
| * | ARM: do not specify -static and -pie at the same timeLucas Stach2015-03-021-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | PIE is a form of dynamic linking and thus inherently incompatible with -static. It worked ok as the current behavior of ld.bfd is to not respect -static if -pie has been specified. ld.gold and future versions of ld.bfd will fail to link if both of those incompatible switches are specified at the same time. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | boards: phytec-som-am335x: Add phycard-som supportWadim Egorov2015-03-021-0/+8
| | | | | | | | | | | | | | Add support for the phyCARD SOM. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | boards: Add phytec-som-am335xWadim Egorov2015-03-021-18/+18
|/ | | | | | | | | | | The main idea behind this patch is to avoid redundant board code. Because of the module similarities of all am335x based phytec boards, we can merge its code. The phytec-som-am335x merges the code of all am335x based phytec SOMs. So we will have only one "board" in the barebox for phyCORE, phyFLEX. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/mxs'Sascha Hauer2015-02-041-0/+20
|\
| * ARM: MXS: Add duckbill board supportSascha Hauer2015-02-031-0/+10
| | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: MXS: imx28evk: Add lowlevel supportSascha Hauer2015-01-201-0/+10
| | | | | | | | | | | | | | This switches the imx28evk to multiimage support and adds the lowlevel initialization to make the bootlets unnecessary. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-30 13:51:39 +0000