| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
| |/ /
| | |
| | |
| | |
| | |
| | |
| | | |
Add a function to notify the udc core, that a bus reset occured.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| |/ /
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The upcoming v1.5.1 version of libfdt adds a dependency on the C99
INT32_MAX symbol.
This is ok for use in the host tool, but libfdt can also be embedded
into barebox, where it would fail as we don't define this anywhere.
Fix this by providing an appropriate definition.
Reported-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \
| |/ /
|/| | |
|
| |/
| |
| |
| |
| |
| |
| | |
The blackfin architecture has been removed from barebox. Remove the
blackfin specifics in the USB drivers as well.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
| |
With 76b6f74c53 we begin embedding a struct mtd_info into struct
nand_chip. With this mtd_to_nand() must be changed accordingly.
Fixes: 76b6f74c53 ("mtd: nand: Embed struct mtd_info into struct nand_chip")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Networked file systems may wish to forego dentry caching altogether, so
every lookup goes over the network and stale data is avoided.
Provide a no_revalidate_d_ops helper object that does this.
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Linux has a generic function for extracting i2c timings parameters from
device-associated firmware nodes. Port this function to barebox, but
have it only work on device tree nodes for now.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This allows to remove some boilerplate from drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The semantic of reset_source_set_instance() required a separate call to
reset_source_set() (or reset_source_set_priority()) and checked right
usage only using the type. Make the set of functions a bit easier to use
by dropping reset_source_set_instance() and instead introduce a function
that can set all relevant parameters (source, priority and instance) in
one go.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Declare and implement getters first, then setters. This syncs the order
of functions in reset_source.c and reset_source.h.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |/ /
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
As with platform device id (does someone still remember?) 0 might be a
valid id. So use -1 for "unknown" or "doesn't apply" instead of 0.
Also don't pass the instance to the device tree if negative. (This ends
up as 0xffffffff otherwise.)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | |/
| |/|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
libfdt can be useful for very early device tree parsing, so compile it
for barobox aswell. This is done the same way as done in the Kernel:
we put C files with the same name as in libfdt into lib/ and just
include the libfdt files from there.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This adds a function to the mtd peb API to write a file spanning
multiple blocks to a mtd device. Bad blocks are automatically skipped
and before anything is done we check if the image will fit into the
remaining space (honouring bad blocks).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This adds support for BCH16 ECC encoding. The support is mostly taken
from Linux-5.3-rc6. One major change is the different wrap mode used.
The Kernel uses wrapmode 1, which means "pass all data through the BCH
engine". Still the Kernel has to skip the OOB marker which is done by
reading all user data, then use NAND_CMD_RNDOUT to position right
behind the OOB marker and then read the ECC data. Instead of doing this
we use wrap mode 4 which allows us to bypass the OOB marker from the
BCH engine automatically. This explains
bch_wrapmode = 1, eccsize0 = 0, eccsize1 = 52 vs.
bch_wrapmode = 4, eccsize0 = 4, eccsize1 = 52
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |/
| |/|
| | |
| | |
| | |
| | |
| | |
| | | |
This adds support for the ELM (Error Location Module) found on
not-too-old OMAP SoCs. The driver has been taken from Linux-5.3-rc6
with interrupt support removed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Similar to what is done in the Kernel. In the Kernel we have a struct
nand_device embedded into struct nand_chip and the nand_device has an
mtd_info embedded into it. Until we have struct nand_device we embed
mtd_info directly into the nand_chip.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |/
| |/|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
All drivers in tree use mtd->priv for the nand_chip. Add and use a static
inline wrapper mtd_to_nand() which we already have in the kernel for
getting the nand_chip from the mtd_info struct. Next step would be to
embed a struct mtd_info into struct nand_chip.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The function is so far unused and the parameter's only use is to be passed
as argument to dev_add_param_fixed which is const as well.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Sometimes we need to wait for state change on a GPIO, provide a helper
for future code to do this.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Add code to emulate firmware/bootloader mode reporting via
"general_status" field on RDU2. This is needed to correctly report if
RAVE SP is in bootloader of application mode during startup.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This patch add elf64 loading support to the elf loader. Since
elf32 and elf64 uses completely different types, to avoid copying all
the code and simply replace elf32 with elf64, use a macro which will
return the appropriate field for each type of header. This macro
generates getter for elf structures according to the class of the loaded
elf.
All direct elf struct dereference are then replaced by call to generated
functions. This allows to keep a common loader code even if types are
different.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Clement Leger <cleger@kalray.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Trying to output a single character via
echo -a /dev/serial0-1
currently results in garbage output after the newline, because console.c's
fops_write discards the buffer length and passes the buffer to
(struct cdev)::puts which only handles NUL-terminated strings.
Fix this by amending (struct cdev)::puts with a new nbytes parameter,
which is correctly propagated. All this functions now return at most the
nbytes parameter they were passed in. This fixes __console_puts, which
used to count new lines twice in its return value.
Fixes: b4f55fcf35 ("console: expose consoles in devfs")
Cc: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The EXT_CSD_EXCEPTION_EVENTS_STATUS array entry is wrongly duplicated.
Replace the index by the correct field at byte offset 58[1].
[1]: See http://webshop.atlantiksysteme.de/temp/FLEXXONeMMC4.5pSLCSPECV1.2.pdf
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |/ /
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The header checks for ATA_DISK_H, but defines a different ATA_DISK,
which would lead to compilation errors when included multiple times.
Fix this.
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
With the latest changes, this file is empty on all archs. Drop it.
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Other arch-specific features are exposed in Kconfig too, so do here
likewise.
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |/
| |/|
| | |
| | |
| | |
| | |
| | |
| | | |
Other arch-specific features are exposed in Kconfig too, so do here
likewise.
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \
| |/ /
|/| | |
|
| |/
| |
| |
| |
| |
| |
| |
| | |
Ported from linux-4.19-at91 linux4sam_6.1 and needed for
SAMA5D27 SOM1 EK.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
| |
piggy verification is a direct prerequisite of uncompressing the
piggydata, so move the verification there.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Both STM32MP BootROM and TF-A first stage expect subsequent bootloader
stages to feature a specific 256-byte long STM32 file header.
Add detection of the header to file_detect_type().
While there's only one version of the header so far, identify the new
header as v1 anyway, so new versions can be unambiguously added.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Some architectures have non-contiguous GPIO ranges where some GPIOs can
have identifiers exceeding the hardcoded ARCH_NR_GPIOs of 256.
One such example is the STM32MP, whose gpioz controller has identifiers
that go up to ('Z' - 'A' + 1) * 0x10 - 1 = 415.
Instead of increasing the array size for all architectures or doing
some sort of packing, allow architecture to define their own overriding
CONFIG_ARCH_NR_GPIO like the kernel does.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This adds nand_of_parse_node() which can be used to parse generic
NAND device properties. Not very complete yet, but it's a start.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The imx-bbu-nand-fcb update handler code calls into the NAND driver
to get the ecc strength and bad block marker position. Change the
API so that only a single function is necessary and not three functions.
Also in future the ecc strength will be configurable via device tree.
This means static parameters like page size / oob size are no longer
enough to calculate the ecc strength and so we store a pointer to our
mtd_info struct in a static global variable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Add static inline wrappers for puts and putchar. This allows the usage
of puts and putchar within the PBL even if the PBL_CONSOLE is disabled.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Extract the necessary functions from sha256 into a PBL headder and add a
verification function to the PBL. The function will be called before the
individual architectures decompress functions is run.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |/
| |/|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
On ARM64 this did not contain the expected barebox_pbl size. Rework this
to be a substraction between __piggydata_start and __image_start, which
should cover the whole PBL.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|