From 5078cce81c77d52ff38921b43f5ea73eebf40251 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 21 Jul 2006 11:16:34 +0200 Subject: * Cleanup TQM5200 board configurations: - make highboot configurations use environment at high end, too, to avoid flash fragmentation - always use redundand environment - don't enable video code for modules without graphics controller - provide useful (though different) mtdparts settings - get rid of CONFIG_CS_AUTOCONF which was always set anyway * Extend mkconfig tool to print more useful target name --- CHANGELOG | 10 +++ MAKEALL | 1 + Makefile | 30 +++++--- board/tqm5200/tqm5200.c | 37 ++++++---- include/configs/TB5200.h | 7 -- include/configs/TQM5200.h | 182 +++++++++++++++++++++++++++------------------- include/configs/aev.h | 5 +- include/configs/spieval.h | 7 -- mkconfig | 6 +- 9 files changed, 166 insertions(+), 119 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 291204b72f..41fd312f8b 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,16 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Cleanup TQM5200 board configurations: + - make highboot configurations use environment at high end, too, + to avoid flash fragmentation + - always use redundand environment + - don't enable video code for modules without graphics controller + - provide useful (though different) mtdparts settings + - get rid of CONFIG_CS_AUTOCONF which was always set anyway + +* Extend mkconfig tool to print more useful target name + * Add support for high-boot on TQM5200 and TQM5200S boards. Hint: the CPLD on the TQM5200 must be programmed with a software version supporting the high boot option! The new TQM5200S is diff --git a/MAKEALL b/MAKEALL index 372e19aa8b..a9d60a4f52 100755 --- a/MAKEALL +++ b/MAKEALL @@ -29,6 +29,7 @@ LIST_5xxx=" \ icecube_5200 lite5200b mcc200 o2dnt \ pf5200 PM520 TB5200 Total5100 \ Total5200 Total5200_Rev2 TQM5200 TQM5200_B \ + TQM5200S \ " ######################################################################### diff --git a/Makefile b/Makefile index 4188ff638c..bd90746597 100644 --- a/Makefile +++ b/Makefile @@ -356,8 +356,6 @@ smmaco4_config: unconfig @./mkconfig -a smmaco4 ppc mpc5xxx tqm5200 spieval_config: unconfig - @echo "#define CONFIG_CS_AUTOCONF">>include/config.h - @echo "... with automatic CS configuration" @./mkconfig -a spieval ppc mpc5xxx tqm5200 TB5200_B_config \ @@ -366,15 +364,13 @@ TB5200_config: unconfig { echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ echo "... with MPC5200B processor" ; \ } - @echo "#define CONFIG_CS_AUTOCONF">>include/config.h - @echo "... with automatic CS configuration" - @./mkconfig -a TB5200 ppc mpc5xxx tqm5200 + @./mkconfig -n $@ -a TB5200 ppc mpc5xxx tqm5200 MINI5200_config \ EVAL5200_config \ TOP5200_config: unconfig @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h - @./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk + @./mkconfig -n $@ -a TOP5200 ppc mpc5xxx top5200 emk Total5100_config \ Total5200_config \ @@ -405,29 +401,39 @@ Total5200_Rev2_lowboot_config: unconfig @./mkconfig -a Total5200 ppc mpc5xxx total5200 TQM5200_config \ -TQM5200_STK100_config \ TQM5200_B_config \ TQM5200_B_HIGHBOOT_config \ +TQM5200S_config \ +TQM5200S_HIGHBOOT_config \ +TQM5200_STK100_config \ +cameron_config \ MiniFAP_config: unconfig @ >include/config.h @[ -z "$(findstring MiniFAP,$@)" ] || \ { echo "#define CONFIG_MINIFAP" >>include/config.h ; \ echo "... TQM5200_AC on MiniFAP" ; \ } + @[ -z "$(findstring cameron,$@)" ] || \ + { echo "#define CONFIG_CAMERON" >>include/config.h ; \ + echo "#define CONFIG_TQM5200S" >>include/config.h ; \ + echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ + echo "... TQM5200S on Cameron" ; \ + } @[ -z "$(findstring STK100,$@)" ] || \ { echo "#define CONFIG_STK52XX_REV100" >>include/config.h ; \ echo "... on a STK52XX.100 base board" ; \ } - @[ -z "$(findstring B,$@)" ] || \ + @[ -z "$(findstring TQM5200_B,$@)" ] || \ { echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ - echo "... with MPC5200B processor" ; \ + } + @[ -z "$(findstring TQM5200S,$@)" ] || \ + { echo "#define CONFIG_TQM5200S" >>include/config.h ; \ + echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ } @[ -z "$(findstring HIGHBOOT,$@)" ] || \ { echo "TEXT_BASE = 0xFFF00000" >board/tqm5200/config.tmp ; \ } - @echo "#define CONFIG_CS_AUTOCONF">>include/config.h ; - @echo "... with automatic CS configuration" ; - @./mkconfig -a TQM5200 ppc mpc5xxx tqm5200 + @./mkconfig -n $@ -a TQM5200 ppc mpc5xxx tqm5200 ######################################################################### ## MPC8xx Systems diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index 1756e7f0d7..8ed44d84a1 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -273,27 +273,36 @@ long int initdram (int board_type) int checkboard (void) { -#if defined (CONFIG_AEVFIFO) +#if defined(CONFIG_AEVFIFO) puts ("Board: AEVFIFO\n"); return 0; #endif -#if defined (CONFIG_TQM5200) -#if defined(CONFIG_TQM5200_B) - puts ("Board: TQM5200 or TQM5200S (TQ-Components GmbH)\n"); + +#if defined(CONFIG_TQM5200S) +# define MODULE_NAME "TQM5200S" #else - puts ("Board: TQM5200 (TQ-Components GmbH)\n"); -#endif /* CONFIG_TQM5200_B */ -#endif -#if defined (CONFIG_STK52XX) - puts (" on a STK52XX baseboard\n"); +# define MODULE_NAME "TQM5200" #endif -#if defined (CONFIG_TB5200) - puts (" on a TB5200 baseboard\n"); + +#if defined(CONFIG_STK52XX) +# define CARRIER_NAME "STK52xx" +#elif defined(CONFIG_TB5200) +# define CARRIER_NAME "TB5200" +#elif defined(CONFIG_CAMERON) +# define CARRIER_NAME "Cameron" +#else +# error "Unknown carrier board" #endif + puts ( "Board: " MODULE_NAME " (TQ-Components GmbH)\n" + " on a " CARRIER_NAME " carrier board\n"); + return 0; } +#undef MODULE_NAME +#undef CARRIER_NAME + void flash_preinit(void) { /* @@ -435,7 +444,6 @@ int board_early_init_r (void) #endif #endif /* CONFIG_PS2MULT */ -#if defined(CONFIG_CS_AUTOCONF) int last_stage_init (void) { /* @@ -530,7 +538,6 @@ int last_stage_init (void) return 0; } -#endif /* CONFIG_CS_AUTOCONF */ #ifdef CONFIG_VIDEO_SM501 @@ -600,10 +607,10 @@ void video_get_info_str (int line_number, char *info) #if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) } else if (line_number == 2) { #if defined (CONFIG_STK52XX) - strcpy (info, " on a STK52XX baseboard"); + strcpy (info, " on a STK52xx carrier board"); #endif #if defined (CONFIG_TB5200) - strcpy (info, " on a TB5200 baseboard"); + strcpy (info, " on a TB5200 carrier board"); #endif #endif } diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index 5d8c8898f8..8a6e5a61b7 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -440,32 +440,25 @@ #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE -/* automatic configuration of chip selects */ -#ifdef CONFIG_CS_AUTOCONF #define CONFIG_LAST_STAGE_INIT -#endif /* * SRAM - Do not map below 2 GB in address space, because this area is used * for SDRAM autosizing. */ -#if defined (CONFIG_CS_AUTOCONF) #define CFG_CS2_START 0xE5000000 #define CFG_CS2_SIZE 0x100000 /* 1 MByte */ #define CFG_CS2_CFG 0x0004D930 -#endif /* * Grafic controller - Do not map below 2 GB in address space, because this * area is used for SDRAM autosizing. */ -#if defined (CONFIG_CS_AUTOCONF) #define SM501_FB_BASE 0xE0000000 #define CFG_CS1_START (SM501_FB_BASE) #define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ #define CFG_CS1_CFG 0x8F48FF70 #define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 -#endif #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 0ef0b9155e..342cf1be45 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -32,27 +32,30 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ -#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ -#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ -#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ +#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ -#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ +#ifndef CONFIG_CAMERON /* On a Cameron board or ... */ +#define CONFIG_STK52XX 1 /* ... on a STK52XX board */ +#endif + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* * Serial console configuration */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #ifdef CONFIG_STK52XX @@ -96,7 +99,7 @@ /* * Video console */ -#if 1 +#ifndef CONFIG_TQM5200S /* No graphics controller on TQM5200S */ #define CONFIG_VIDEO #define CONFIG_VIDEO_SM501 #define CONFIG_VIDEO_SM501_32BPP @@ -129,10 +132,12 @@ #define ADD_USB_CMD 0 #endif +#ifndef CONFIG_CAMERON /* POST support */ #define CONFIG_POST (CFG_POST_MEMORY | \ CFG_POST_CPU | \ CFG_POST_I2C) +#endif #ifdef CONFIG_POST #define CFG_CMD_POST_DIAG CFG_CMD_DIAG @@ -176,8 +181,8 @@ #define CONFIG_TIMESTAMP /* display image timestamps */ -#if (TEXT_BASE == 0xFC000000) /* Boot low */ -# define CFG_LOWBOOT 1 +#if (TEXT_BASE != 0xFFF00000) +# define CFG_LOWBOOT 1 /* Boot low */ #endif /* @@ -191,30 +196,38 @@ #undef CONFIG_BOOTARGS -#if defined(CONFIG_TQM5200_B) -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "bootfile=/tftpboot/tqm5200/uImage\0" \ - "load=tftp 200000 ${u-boot}\0" \ - "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ +#ifdef CONFIG_STK52XX +# if defined(CONFIG_TQM5200_B) +# if defined(CFG_LOWBOOT) +# define ENV_UPDT \ "update=protect off FC000000 FC07FFFF;" \ "erase FC000000 FC07FFFF;" \ "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC07FFFF\0" \ - "" + "protect on FC000000 FC07FFFF\0" +# else /* highboot */ +# define ENV_UPDT \ + "update=protect off FFF00000 FFF7FFFF;" \ + "erase FFF00000 FFF7FFFF;" \ + "cp.b 200000 FFF00000 ${filesize};" \ + "protect on FFF00000 FFF7FFFF\0" +# endif /* CFG_LOWBOOT */ +# else /* !CONFIG_TQM5200_B */ +# define ENV_UPDT \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC05FFFF\0" +# endif /* CONFIG_TQM5200_B */ +#elif defined (CONFIG_CAMERON) +# define ENV_UPDT \ + "update=protect off FC000000 FC03FFFF;" \ + "erase FC000000 FC03FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC03FFFF\0" #else +# error "Unknown Carrier Board" +#endif /* CONFIG_STK52XX */ + #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ @@ -224,20 +237,19 @@ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ - "flash_self=run ramargs addip;" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=ttyS0,${baudrate}\0" \ + "flash_self=run ramargs addip addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip;" \ + "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \ + "bootm\0" \ "bootfile=/tftpboot/tqm5200/uImage\0" \ - "load=tftp 200000 ${u-boot}\0" \ "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ - "update=protect off FC000000 FC05FFFF;" \ - "erase FC000000 FC05FFFF;" \ - "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC05FFFF\0" \ + "load=tftp 200000 ${u-boot}\0" \ + ENV_UPDT \ "" -#endif /* CONFIG_TQM5200_B */ #define CONFIG_BOOTCOMMAND "run net_nfs" @@ -319,45 +331,69 @@ #define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ #define CFG_FLASH_USE_BUFFER_WRITE 1 -#if defined(CONFIG_TQM5200_B) -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00080000) +#if defined (CONFIG_CAMERON) +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000) +#elif defined(CONFIG_TQM5200_B) +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00080000) #else -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) -#endif /* CONFIG_TQM5200_B */ +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) +#endif + #define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks (= chip selects) */ /* Dynamic MTD partition support */ #define CONFIG_JFFS2_CMDLINE #define MTDIDS_DEFAULT "nor0=TQM5200-0" -#if defined(CONFIG_TQM5200_B) -#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \ - "1280k(kernel)," \ + +#ifdef CONFIG_STK52XX +# if defined(CONFIG_TQM5200_B) +# if defined(CFG_LOWBOOT) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:1m(firmware)," \ + "1536k(kernel)," \ + "3584k(small-fs)," \ "2m(initrd)," \ - "4m(small-fs)," \ - "16m(big-fs)," \ - "8m(misc)" -#else -#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "8m(misc)," \ + "16m(big-fs)" +# else /* highboot */ +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:2560k(kernel)," \ + "3584k(small-fs)," \ + "2m(initrd)," \ + "8m(misc)," \ + "15m(big-fs)," \ + "1m(firmware)" +# endif /* CFG_LOWBOOT */ +# else /* !CONFIG_TQM5200_B */ +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ "1408k(kernel)," \ "2m(initrd)," \ "4m(small-fs)," \ - "16m(big-fs)," \ - "8m(misc)" -#endif /* CONFIG_TQM5200_B */ + "8m(misc)," \ + "16m(big-fs)" +# endif /* CONFIG_TQM5200_B */ +#elif defined (CONFIG_CAMERON) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \ + "1792k(kernel)," \ + "3584k(small-fs)," \ + "2m(initrd)," \ + "8m(misc)," \ + "16m(big-fs)" +#else +# error "Unknown Carrier Board" +#endif /* CONFIG_STK52XX */ /* * Environment settings */ #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */ #if defined(CONFIG_TQM5200_B) #define CFG_ENV_SECT_SIZE 0x40000 #else #define CFG_ENV_SECT_SIZE 0x20000 +#endif /* CONFIG_TQM5200_B */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) -#endif /* CONFIG_TQM5200_B */ /* * Memory map @@ -385,12 +421,15 @@ # define CFG_RAMBOOT 1 #endif -#if defined(CONFIG_TQM5200_B) -#define CFG_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ +#if defined (CONFIG_CAMERON) +# define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#elif defined(CONFIG_TQM5200_B) +# define CFG_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ #else -#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ -#endif /* CONFIG_TQM5200_B */ -#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ +# define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#endif + +#define CFG_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* @@ -462,6 +501,10 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#define CFG_PROMPT_HUSH_PS2 "> " + #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -508,32 +551,25 @@ #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE -/* automatic configuration of chip selects */ -#ifdef CONFIG_CS_AUTOCONF #define CONFIG_LAST_STAGE_INIT -#endif /* * SRAM - Do not map below 2 GB in address space, because this area is used * for SDRAM autosizing. */ -#if defined (CONFIG_CS_AUTOCONF) #define CFG_CS2_START 0xE5000000 #define CFG_CS2_SIZE 0x100000 /* 1 MByte */ #define CFG_CS2_CFG 0x0004D930 -#endif /* * Grafic controller - Do not map below 2 GB in address space, because this * area is used for SDRAM autosizing. */ -#if defined (CONFIG_CS_AUTOCONF) #define SM501_FB_BASE 0xE0000000 #define CFG_CS1_START (SM501_FB_BASE) #define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ #define CFG_CS1_CFG 0x8F48FF70 #define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 -#endif #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ diff --git a/include/configs/aev.h b/include/configs/aev.h index aa6bc91b20..8d9f0a1661 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2003-2005 + * (C) Copyright 2003-2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * (C) Copyright 2004-2005 @@ -370,10 +370,7 @@ #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE -/* automatic configuration of chip selects */ -#ifdef CONFIG_CS_AUTOCONF #define CONFIG_LAST_STAGE_INIT -#endif /* * SRAM - Do not map below 2 GB in address space, because this area is used diff --git a/include/configs/spieval.h b/include/configs/spieval.h index 9ebb51e0ab..f40dde2ac8 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -452,32 +452,25 @@ #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE -/* automatic configuration of chip selects */ -#ifdef CONFIG_CS_AUTOCONF #define CONFIG_LAST_STAGE_INIT -#endif /* * SRAM - Do not map below 2 GB in address space, because this area is used * for SDRAM autosizing. */ -#if defined (CONFIG_CS_AUTOCONF) #define CFG_CS2_START 0xE5000000 #define CFG_CS2_SIZE 0x100000 /* 1 MByte */ #define CFG_CS2_CFG 0x0004D930 -#endif /* * Grafic controller - Do not map below 2 GB in address space, because this * area is used for SDRAM autosizing. */ -#if defined (CONFIG_CS_AUTOCONF) #define SM501_FB_BASE 0xE0000000 #define CFG_CS1_START (SM501_FB_BASE) #define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ #define CFG_CS1_CFG 0x8F48FF70 #define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 -#endif #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ diff --git a/mkconfig b/mkconfig index 54775d31df..4fe6e448be 100755 --- a/mkconfig +++ b/mkconfig @@ -9,19 +9,23 @@ # APPEND=no # Default: Create new config file +BOARD_NAME="" # Name to print in make output while [ $# -gt 0 ] ; do case "$1" in --) shift ; break ;; -a) shift ; APPEND=yes ;; + -n) shift ; BOARD_NAME="${1%%_config}" ; shift ;; *) break ;; esac done +[ "${BOARD_NAME}" ] || BOARD_NAME="$1" + [ $# -lt 4 ] && exit 1 [ $# -gt 6 ] && exit 1 -echo "Configuring for $1 board..." +echo "Configuring for ${BOARD_NAME} board..." cd ./include -- cgit v1.2.3