From d689e3462c2ef39f8760051cf9260a8a52b77b25 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 14 Aug 2006 21:18:21 +0200 Subject: Fix drivers/dm9000.c when configured in 32 bit mode. Patch by Eric Benard, 17 Nov 2005 --- CHANGELOG | 3 +++ drivers/dm9000x.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/CHANGELOG b/CHANGELOG index 24499c5621..2247a24af4 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix drivers/dm9000.c when configured in 32 bit mode. + Patch by Eric Benard, 17 Nov 2005 + * Fix control-c handing in CONFIG_CMDLINE_EDITING Properly pass break code back from readline. Patch by Roger Blofeld, 31 Jul 2006 diff --git a/drivers/dm9000x.c b/drivers/dm9000x.c index 0e475d4723..687707627e 100644 --- a/drivers/dm9000x.c +++ b/drivers/dm9000x.c @@ -436,6 +436,9 @@ eth_rx(void) u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0]; u16 RxStatus, RxLen = 0; u32 tmplen, i; +#ifdef CONFIG_DM9000_USE_32BIT + u32 tmpdata; +#endif /* Check packet ready or not */ DM9000_ior(DM9000_MRCMDX); /* Dummy read */ -- cgit v1.2.3 From 80f0c0f58f6a39f893101d14a79169504e3c93fd Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 14 Aug 2006 22:05:26 +0200 Subject: Fix fatload command on FAT32 formatted partitions. Patch by Joachim Jaeger, 18 Nov 2005 --- CHANGELOG | 3 +++ include/fat.h | 8 ++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 2247a24af4..6c8043ff7c 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix fatload command on FAT32 formatted partitions. + Patch by Joachim Jaeger, 18 Nov 2005 + * Fix drivers/dm9000.c when configured in 32 bit mode. Patch by Eric Benard, 17 Nov 2005 diff --git a/include/fat.h b/include/fat.h index 0645458f17..92638d535e 100644 --- a/include/fat.h +++ b/include/fat.h @@ -175,15 +175,19 @@ typedef struct dir_slot { __u8 name11_12[4]; /* Last 2 characters in name */ } dir_slot; -/* Private filesystem parameters */ +/* Private filesystem parameters + * + * Note: FAT buffer has to be 32 bit aligned + * (see FAT32 accesses) + */ typedef struct { + __u8 fatbuf[FATBUFSIZE]; /* Current FAT buffer */ int fatsize; /* Size of FAT in bits */ __u16 fatlength; /* Length of FAT in sectors */ __u16 fat_sect; /* Starting sector of the FAT */ __u16 rootdir_sect; /* Start sector of root directory */ __u16 clust_size; /* Size of clusters in sectors */ short data_begin; /* The sector of the first cluster, can be negative */ - __u8 fatbuf[FATBUFSIZE]; /* Current FAT buffer */ int fatbufnum; /* Used by get_fatent, init to -1 */ } fsdata; -- cgit v1.2.3 From ddd5d9daf07be16f4cf40e2dc760a5b67d01224f Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 14 Aug 2006 22:43:13 +0200 Subject: Fix typo. Patch by Andreas Engel, 28 Nov 2005 --- CHANGELOG | 3 +++ net/tftp.c | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/CHANGELOG b/CHANGELOG index 6c8043ff7c..2ddc67d71a 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix typo. + Patch by Andreas Engel, 28 Nov 2005 + * Fix fatload command on FAT32 formatted partitions. Patch by Joachim Jaeger, 18 Nov 2005 diff --git a/net/tftp.c b/net/tftp.c index eca21d294e..f3a5471483 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -225,7 +225,7 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len) if (TftpBlock == 0) { TftpBlockWrap++; TftpBlockWrapOffset += TFTP_BLOCK_SIZE * TFTP_SEQUENCE_SIZE; - printf ("\n\t %lu MB reveived\n\t ", TftpBlockWrapOffset>>20); + printf ("\n\t %lu MB received\n\t ", TftpBlockWrapOffset>>20); } else { if (((TftpBlock - 1) % 10) == 0) { putc ('#'); -- cgit v1.2.3 From 2f6fa46d4149f62f0e8686d5005da2beeba9e243 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 14 Aug 2006 23:17:47 +0200 Subject: Fixed common.h spelling error. Patch by Cory Tusar, 30 Nov 2005 --- CHANGELOG | 3 +++ include/common.h | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/CHANGELOG b/CHANGELOG index 2ddc67d71a..206c441096 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fixed common.h spelling error. + Patch by Cory Tusar, 30 Nov 2005 + * Fix typo. Patch by Andreas Engel, 28 Nov 2005 diff --git a/include/common.h b/include/common.h index bd41ae179a..9a19001c18 100644 --- a/include/common.h +++ b/include/common.h @@ -603,7 +603,7 @@ void show_boot_progress (int status); #endif #ifdef CONFIG_INIT_CRITICAL -#error CONFIG_INIT_CRITICAL is depracted! +#error CONFIG_INIT_CRITICAL is deprecated! #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README. #endif -- cgit v1.2.3 From 94568b600acd768f0e1b3c0abe3694963593cf60 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 14 Aug 2006 23:23:06 +0200 Subject: Update for SC520 board. Patch by David Updegraff, 02 Dec 2005 --- CHANGELOG | 3 +++ cpu/i386/sc520.c | 18 ++++++++++++++---- cpu/i386/sc520_asm.S | 54 +++++++++++++++++++++++++++++++++++++++++++++++++--- 3 files changed, 68 insertions(+), 7 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 206c441096..c919b5b60c 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Update for SC520 board. + Patch by David Updegraff, 02 Dec 2005 + * Fixed common.h spelling error. Patch by Cory Tusar, 30 Nov 2005 diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c index c83f0bb6cf..1c4370b081 100644 --- a/cpu/i386/sc520.c +++ b/cpu/i386/sc520.c @@ -31,7 +31,9 @@ #include #include #include +#ifdef CONFIG_SC520_SSI #include +#endif #include #include #include @@ -143,7 +145,15 @@ unsigned long init_sc520_dram(void) u32 dram_present=0; u32 dram_ctrl; - +#ifdef CFG_SDRAM_DRCTMCTL + /* these memory control registers are set up in the assember part, + * in sc520_asm.S, during 'mem_init'. If we muck with them here, + * after we are running a stack in RAM, we have troubles. Besides, + * these refresh and delay values are better ? simply specified + * outright in the include/configs/{cfg} file since the HW designer + * simply dictates it. + */ +#else int val; int cas_precharge_delay = CFG_SDRAM_PRECHARGE_DELAY; @@ -162,6 +172,7 @@ unsigned long init_sc520_dram(void) } else { val = 3; /* 62.4us */ } + write_mmcr_byte(SC520_DRCCTL, (read_mmcr_byte(SC520_DRCCTL) & 0xcf) | (val<<4)); val = read_mmcr_byte(SC520_DRCTMCTL); @@ -181,13 +192,12 @@ unsigned long init_sc520_dram(void) val |= 1; } write_mmcr_byte(SC520_DRCTMCTL, val); - +#endif /* We read-back the configuration of the dram * controller that the assembly code wrote */ dram_ctrl = read_mmcr_long(SC520_DRCBENDADR); - bd->bi_dram[0].start = 0; if (dram_ctrl & 0x80) { /* bank 0 enabled */ @@ -274,7 +284,7 @@ int pci_sc520_set_irq(int pci_pin, int irq) { int i; -# if 0 +# if 1 printf("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq); #endif if (irq < 0 || irq > 15) { diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S index 80464fa78b..e1fa37a4a6 100644 --- a/cpu/i386/sc520_asm.S +++ b/cpu/i386/sc520_asm.S @@ -113,6 +113,7 @@ .equ DRCCFG, 0x0fffef014 /* DRAM bank configuration register */ .equ DRCBENDADR, 0x0fffef018 /* DRAM bank ending address register */ .equ ECCCTL, 0x0fffef020 /* DRAM ECC control register */ +.equ ECCINT, 0x0fffefd18 /* DRAM ECC nmi-INT mapping */ .equ DBCTL, 0x0fffef040 /* DRAM buffer control register */ .equ CACHELINESZ, 0x00000010 /* size of our cache line (read buffer) */ @@ -459,6 +460,12 @@ emptybank: incl %edi loop cleanuplp +#if defined CFG_SDRAM_DRCTMCTL + /* just have your hardware desinger _GIVE_ you what you need here! */ + movl $DRCTMCTL, %edi + movb $CFG_SDRAM_DRCTMCTL,%al + movb (%edi), %al +#else #if defined(CFG_SDRAM_CAS_LATENCY_2T) || defined(CFG_SDRAM_CAS_LATENCY_3T) /* set the CAS latency now since it is hard to do * when we run from the RAM */ @@ -470,7 +477,8 @@ emptybank: #ifdef CFG_SDRAM_CAS_LATENCY_3T orb $0x10, %al #endif - movb %al, (%edi) + movb %al, (%edi) +#endif #endif movl $DRCCTL, %edi /* DRAM Control register */ movb $0x3,%al /* Load mode register cmd */ @@ -528,9 +536,49 @@ bank0: movl (%edi), %eax shll $22, %eax movl %eax, %ebx -done: movl %ebx, %eax +done: + movl %ebx, %eax + +#if CFG_SDRAM_ECC_ENABLE + /* A nominal memory test: just a byte at each address line */ + movl %eax, %ecx + shrl $0x1, %ecx + movl $0x1, %edi +memtest0: + movb $0xa5, (%edi) + cmpb $0xa5, (%edi) + jne out + shrl $1, %ecx + andl %ecx,%ecx + jz set_ecc + shll $1, %edi + jmp memtest0 + +set_ecc: + /* clear all ram with a memset */ + movl %eax, %ecx + xorl %esi, %esi + xorl %edi, %edi + xorl %eax, %eax + shrl $2, %ecx + cld + rep stosl + /* enable read, write buffers */ + movb $0x11, %al + movl $DBCTL, %edi + movb %al, (%edi) + /* enable NMI mapping for ECC */ + movl $ECCINT, %edi + mov $0x10, %al + movb %al, (%edi) + /* Turn on ECC */ + movl $ECCCTL, %edi + mov $0x05, %al + movb %al, (%edi) +#endif +out: + movl %ebx, %eax jmp *%ebp - #endif /* CONFIG_SC520 */ -- cgit v1.2.3 From 463764c893a657124eb2818e3103a04171bcbda1 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 17 Aug 2006 00:36:51 +0200 Subject: Add debug console on COM12 for MCC200 board --- CHANGELOG | 2 ++ Makefile | 5 +++++ include/configs/mcc200.h | 9 +++++++-- 3 files changed, 14 insertions(+), 2 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 24499c5621..727d7ec7ae 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add debug console on COM12 for MCC200 board + * Fix control-c handing in CONFIG_CMDLINE_EDITING Properly pass break code back from readline. Patch by Roger Blofeld, 31 Jul 2006 diff --git a/Makefile b/Makefile index 128ae59a06..4d579d9bd3 100644 --- a/Makefile +++ b/Makefile @@ -325,6 +325,7 @@ lite5200b_LOWBOOT_config: unconfig mcc200_config \ mcc200_SDRAM \ mcc200_highboot \ +mcc200_COM12 \ mcc200_highboot_SDRAM: unconfig @ >include/config.h @[ -n "$(findstring highboot,$@)" ] || \ @@ -341,6 +342,10 @@ mcc200_highboot_SDRAM: unconfig { echo "#define CONFIG_MCC200_SDRAM" >>include/config.h ; \ echo "... with SDRAM" ; \ } + @[ -z "$(findstring COM12,$@)" ] || \ + { echo "#define CONFIG_CONSOLE_COM12" >>include/config.h ; \ + echo "... with console on COM12" ; \ + } @./mkconfig -a mcc200 ppc mpc5xxx mcc200 o2dnt_config: diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index ce33b85c96..563f7978d5 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -51,15 +51,20 @@ * To select console on the one of 8 external UARTs, * define CONFIG_QUART_CONSOLE as 1, 2, 3, or 4 for the first Quad UART, * or as 5, 6, 7, or 8 for the second Quad UART. + * COM11, COM12, COM13, COM14 are located on the second Quad UART. * * CONFIG_PSC_CONSOLE must be undefined in this case. */ -/* #define CONFIG_QUART_CONSOLE 1 */ /* console is on UART1 of QUART1 */ +#ifdef CONFIG_CONSOLE_COM12 +#define CONFIG_QUART_CONSOLE 6 /* console is on UARTF of QUART2 */ +#else +#define CONFIG_QUART_CONSOLE 8 /* console is on UARTH of QUART2 */ +#endif /* * To select console on PSC1, define CONFIG_PSC_CONSOLE as 1 * and undefine CONFIG_QUART_CONSOLE. */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +/*#define CONFIG_PSC_CONSOLE 1 */ /* console is on PSC1 */ #if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) #error "Select only one console device!" #endif -- cgit v1.2.3 From 6183bb9e5be52582d99c50e676fbed6a77ccc526 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 17 Aug 2006 00:50:26 +0200 Subject: MCC200: restrict addressable flash space to 32 MB --- CHANGELOG | 2 ++ board/mcc200/mcc200.c | 8 ++++++++ 2 files changed, 10 insertions(+) diff --git a/CHANGELOG b/CHANGELOG index 727d7ec7ae..a3b4b239f9 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* MCC200: restrict addressable flash space to 32 MB + * Add debug console on COM12 for MCC200 board * Fix control-c handing in CONFIG_CMDLINE_EDITING diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c index 167dc0f846..775030c17c 100644 --- a/board/mcc200/mcc200.c +++ b/board/mcc200/mcc200.c @@ -203,6 +203,8 @@ int checkboard (void) int misc_init_r (void) { + ulong flash_sup_end, snum; + /* * Adjust flash start and offset to detected values */ @@ -257,6 +259,12 @@ int misc_init_r (void) (flash_info[0].start[0] - 1) + flash_info[0].size, &flash_info[0]); *(volatile int*)MPC5XXX_CS0_CFG &= ~(1 << 6); + printf ("Warning: Only 32 of 64 MB of Flash are accessible from U-Boot\n"); + flash_info[0].size = 32 << 20; + for (snum = 0, flash_sup_end = gd->bd->bi_flashstart + (32<<20); + flash_info[0].start[snum] < flash_sup_end; + snum++); + flash_info[0].sector_count = snum; } return (0); -- cgit v1.2.3 From 0a0f3a46fb5cfa7105402bee9c52dd379325d156 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 17 Aug 2006 10:48:36 +0200 Subject: Cleanup debug code for yucca board. --- CHANGELOG | 2 ++ include/configs/yucca.h | 3 --- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index a3b4b239f9..961e073e4c 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Cleanup debug code for yucca board. + * MCC200: restrict addressable flash space to 32 MB * Add debug console on COM12 for MCC200 board diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 884f85c31e..a6532b5e85 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -31,9 +31,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define DEBUG -#undef DEBUG - /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -- cgit v1.2.3 From 6fe16a8769a3c8923dea24a7ed9ff7f1f89c3bef Mon Sep 17 00:00:00 2001 From: Rafal Jaworowski Date: Fri, 18 Aug 2006 10:39:11 +0200 Subject: Fix TQM834x hang. --- CHANGELOG | 2 ++ include/configs/TQM834x.h | 19 ++++++++++++++----- 2 files changed, 16 insertions(+), 5 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 961e073e4c..05d33b4e2d 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix TQM834x hang. + * Cleanup debug code for yucca board. * MCC200: restrict addressable flash space to 32 MB diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index cec7e3ece4..92c7016e6b 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -422,9 +422,9 @@ extern int tqm834x_num_flash_banks; #define CFG_SICRL SICRL_LDP_A /* i-cache and d-cache disabled */ -#define CFG_HID0_INIT 0x000000000 -#define CFG_HID0_FINAL CFG_HID0_INIT -#define CFG_HID2 0x000000000 +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL CFG_HID0_INIT +#define CFG_HID2 HID2_HBE /* DDR 0 - 512M */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) @@ -437,12 +437,21 @@ extern int tqm834x_num_flash_banks; #define CFG_IBAT2U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) /* PCI */ -#define CFG_IBAT3L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#ifdef CONFIG_PCI +#define CFG_IBAT3L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT3U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_IBAT4L (CFG_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT4L (CFG_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT4U (CFG_PCI1_MEM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP) #define CFG_IBAT5L (CFG_PCI1_IO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CFG_IBAT5U (CFG_PCI1_IO_BASE + 0x10000000 | BATU_BL_16M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_IBAT4L (0) +#define CFG_IBAT4U (0) +#define CFG_IBAT5L (0) +#define CFG_IBAT5U (0) +#endif /* IMMRBAR */ #define CFG_IBAT6L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -- cgit v1.2.3 From 6d3bc9b8cfd5d60708f95ded007cda7bc29ac089 Mon Sep 17 00:00:00 2001 From: Marian Balakowicz Date: Fri, 18 Aug 2006 19:14:46 +0200 Subject: Add support for WTK FO300 board (TQM5200 based). --- CHANGELOG | 2 ++ MAKEALL | 2 +- Makefile | 7 ++++- board/tqm5200/cmd_stk52xx.c | 27 +++++++++++++++++-- board/tqm5200/tqm5200.c | 64 ++++++++++++++++++++++++++++++++++++++++++++- include/configs/TQM5200.h | 55 ++++++++++++++++++++++++++++++++------ include/mpc5xxx.h | 10 +++++++ 7 files changed, 154 insertions(+), 13 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index e40de36746..82be4e3d77 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add support for WTK FO300 board (TQM5200 based). + * Fix TQM834x hang. * Update for SC520 board. diff --git a/MAKEALL b/MAKEALL index 467a9bee0a..48eeaaacf6 100755 --- a/MAKEALL +++ b/MAKEALL @@ -29,7 +29,7 @@ LIST_5xxx=" \ icecube_5200 lite5200b mcc200 o2dnt \ pf5200 PM520 TB5200 Total5100 \ Total5200 Total5200_Rev2 TQM5200 TQM5200_B \ - TQM5200S \ + TQM5200S fo300 \ " ######################################################################### diff --git a/Makefile b/Makefile index 4d579d9bd3..4cc7a48ba3 100644 --- a/Makefile +++ b/Makefile @@ -424,8 +424,13 @@ TQM5200S_config \ TQM5200S_HIGHBOOT_config \ TQM5200_STK100_config \ cam5200_config \ -MiniFAP_config: unconfig +MiniFAP_config \ +fo300_config: unconfig @ >include/config.h + @[ -z "$(findstring fo300,$@)" ] || \ + { echo "#define CONFIG_FO300" >>include/config.h ; \ + echo "... TQM5200 on FO300" ; \ + } @[ -z "$(findstring MiniFAP,$@)" ] || \ { echo "#define CONFIG_MINIFAP" >>include/config.h ; \ echo "... TQM5200_AC on MiniFAP" ; \ diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c index c37d4c662e..7af69f21a2 100755 --- a/board/tqm5200/cmd_stk52xx.c +++ b/board/tqm5200/cmd_stk52xx.c @@ -30,8 +30,8 @@ #include #if (CONFIG_COMMANDS & CFG_CMD_BSP) -#if defined (CONFIG_STK52XX) +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) #define DEFAULT_VOL 45 #define DEFAULT_FREQ 500 #define DEFAULT_DURATION 200 @@ -537,7 +537,9 @@ static int cmd_beep(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return rcode; } +#endif +#if defined(CONFIG_STK52XX) void led_init(void) { struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; @@ -736,7 +738,9 @@ int do_led(char *argv[]) return 0; } +#endif +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) /* * return 1 on CAN initialization failure * return 0 if no failure @@ -1106,6 +1110,7 @@ int do_rs232(char *argv[]) return error_status; } +#ifndef CONFIG_FO300 static void sm501_backlight (unsigned int state) { if (state == BL_ON) { @@ -1115,6 +1120,7 @@ static void sm501_backlight (unsigned int state) *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &= ~((1 << 26) | (1 << 27)); } +#endif int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -1124,7 +1130,9 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) printf ("Revision 100 of STK52XX not supported!\n"); return 1; #endif +#if defined(CONFIG_STK52XX) led_init(); +#endif can_init(); switch (argc) { @@ -1152,6 +1160,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) else printf ("Error\n"); return rcode; +#ifndef CONFIG_FO300 } else if (strncmp (argv[1], "backlight", 4) == 0) { if (strncmp (argv[2], "on", 2) == 0) { sm501_backlight (BL_ON); @@ -1161,14 +1170,17 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) sm501_backlight (BL_OFF); return 0; } +#endif } break; +#if defined(CONFIG_STK52XX) case 4: if (strcmp (argv[1], "led") == 0) { return (do_led (argv)); } break; +#endif default: break; @@ -1204,7 +1216,9 @@ U_BOOT_CMD( "[channel]\n" " - play short beep on \"l\"eft or \"r\"ight channel\n" ); +#endif /* CONFIG_STK52XX || CONFIG_FO300 */ +#if defined(CONFIG_STK52XX) U_BOOT_CMD( fkt , 4, 1, cmd_fkt, "fkt - Function test routines\n", @@ -1217,5 +1231,14 @@ U_BOOT_CMD( "fkt backlight on/off\n" " - switch backlight on or off\n" ); -#endif /* CONFIG_STK52XX */ +#elif defined(CONFIG_FO300) +U_BOOT_CMD( + fkt , 3, 1, cmd_fkt, + "fkt - Function test routines\n", + "fkt can\n" + " - loopback plug for X16/X29 required\n" + "fkt rs232 number\n" + " - loopback plug(s) for X21/X22 required\n" +); +#endif #endif /* CFG_CMD_BSP */ diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index d6f7737d5b..0026e086cb 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -290,6 +290,8 @@ int checkboard (void) # define CARRIER_NAME "TB5200" #elif defined(CONFIG_CAM5200) # define CARRIER_NAME "Cam5200" +#elif defined(CONFIG_FO300) +# define CARRIER_NAME "FO300" #else # error "Unknown carrier board" #endif @@ -541,7 +543,11 @@ int last_stage_init (void) #ifdef CONFIG_VIDEO_SM501 +#ifdef CONFIG_FO300 +#define DISPLAY_WIDTH 800 +#else #define DISPLAY_WIDTH 640 +#endif #define DISPLAY_HEIGHT 480 #ifdef CONFIG_VIDEO_SM501_8BPP @@ -571,6 +577,28 @@ static const SMI_REGS init_regs [] = {0x80218, 0x000201e9}, {0x80200, 0x00013306}, #else /* panel + CRT */ +#ifdef CONFIG_FO300 + {0x00004, 0x0}, + {0x00048, 0x00021807}, + {0x0004C, 0x301a0a01}, + {0x00054, 0x1}, + {0x00040, 0x00021807}, + {0x00044, 0x091a0a01}, + {0x00054, 0x0}, + {0x80000, 0x0f013106}, + {0x80004, 0xc428bb17}, + {0x8000C, 0x00000000}, + {0x80010, 0x0C800C80}, + {0x80014, 0x03200000}, + {0x80018, 0x01e00000}, + {0x8001C, 0x00000000}, + {0x80020, 0x01e00320}, + {0x80024, 0x042a031f}, + {0x80028, 0x0086034a}, + {0x8002C, 0x020c01df}, + {0x80030, 0x000201ea}, + {0x80200, 0x00010000}, +#else {0x00004, 0x0}, {0x00048, 0x00021807}, {0x0004C, 0x091a0a01}, @@ -591,6 +619,7 @@ static const SMI_REGS init_regs [] = {0x8002C, 0x020c01df}, {0x80030, 0x000201e9}, {0x80200, 0x00010000}, +#endif /* #ifdef CONFIG_FO300 */ #endif {0, 0} }; @@ -604,7 +633,7 @@ void video_get_info_str (int line_number, char *info) { if (line_number == 1) { strcpy (info, " Board: TQM5200 (TQ-Components GmbH)"); -#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) +#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) || defined(CONFIG_FO300) } else if (line_number == 2) { #if defined (CONFIG_STK52XX) strcpy (info, " on a STK52xx carrier board"); @@ -612,6 +641,9 @@ void video_get_info_str (int line_number, char *info) #if defined (CONFIG_TB5200) strcpy (info, " on a TB5200 carrier board"); #endif +#if defined (CONFIG_FO300) + strcpy (info, " on a FO300 carrier board"); +#endif #endif } else { @@ -697,3 +729,33 @@ int board_get_height (void) } #endif /* CONFIG_VIDEO_SM501 */ + + +#ifdef CONFIG_BOARD_EARLY_INIT_F +#ifdef CONFIG_FO300 +int board_early_init_f (void) +{ + vu_long timer3_status; + DECLARE_GLOBAL_DATA_PTR; + + /* Configure GPT3 as GPIO input */ + *(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004; + + /* Read in TIMER_3 pin status */ + timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS; + +#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED + /* Force silent console mode if S1 switch + * is in closed position (TIMER_3 pin status is LOW). */ + if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0) +#else + /* Force silent console mode if S1 switch + * is in open position (TIMER_3 pin status is HIGH). */ + if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1) +#endif + gd->flags |= GD_FLG_SILENT; + + return 0; +} +#endif +#endif diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index be83b67672..f157d42fce 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -37,7 +37,8 @@ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ -#ifndef CONFIG_CAM5200 /* On a Cameron board or ... */ +/* On a Cameron board or on a FO300 board or ... */ +#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300) #define CONFIG_STK52XX 1 /* ... on a STK52XX board */ #endif @@ -58,6 +59,20 @@ #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#ifdef CONFIG_FO300 +#define CFG_DEVICE_NULLDEV 1 /* enable null device */ +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* used to detect S1 switch position */ + +#if 0 +#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED 1 /* silent console on PSC1 when S1 */ + /* switch is closed */ +#endif + +#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* silent console on PSC1 when S1 */ + /* switch is open */ +#endif + #ifdef CONFIG_STK52XX #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ #define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ @@ -105,12 +120,18 @@ #define CONFIG_VIDEO_SM501_32BPP #define CONFIG_CFB_CONSOLE #define CONFIG_VIDEO_LOGO -#define CONFIG_VGA_AS_SINGLE_DEVICE + +#ifndef CONFIG_FO300 #define CONFIG_CONSOLE_EXTRA_INFO +#else +#define CONFIG_VIDEO_BMP_LOGO +#endif + +#define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_SPLASH_SCREEN #define CFG_CONSOLE_IS_IN_ENV -#endif +#endif /* #ifndef CONFIG_TQM5200S */ #ifdef CONFIG_VIDEO #define ADD_BMP_CMD CFG_CMD_BMP @@ -124,7 +145,7 @@ #define CONFIG_ISO_PARTITION /* USB */ -#ifdef CONFIG_STK52XX +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) #define CONFIG_USB_OHCI #define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE @@ -148,7 +169,7 @@ #endif /* IDE */ -#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) +#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) || defined(CONFIG_FO300) #define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) #else #define ADD_IDE_CMD 0 @@ -224,6 +245,12 @@ "erase FC000000 FC03FFFF;" \ "cp.b 200000 FC000000 ${filesize};" \ "protect on FC000000 FC03FFFF\0" +#elif defined (CONFIG_FO300) +# define ENV_UPDT \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC05FFFF\0" #else # error "Unknown Carrier Board" #endif /* CONFIG_STK52XX */ @@ -378,6 +405,13 @@ "2m(initrd)," \ "8m(misc)," \ "16m(big-fs)" +#elif defined (CONFIG_FO300) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "1408k(kernel)," \ + "2m(initrd)," \ + "4m(small-fs)," \ + "8m(misc)," \ + "16m(big-fs)" #else # error "Unknown Carrier Board" #endif /* CONFIG_STK52XX */ @@ -450,15 +484,18 @@ * use ALT CAN position: Bits 2-3 (mask: 0x30000000): * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. - * Use for REV200 STK52XX boards. Do not use with REV100 modules - * (because, there I2C1 is used as I2C bus) + * Use for REV200 STK52XX boards and FO300 boards. Do not use + * with REV100 modules (because, there I2C1 is used as I2C bus) * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) * 000 -> All PSC2 pins are GIOPs * 001 -> CAN1/2 on PSC2 pins * Use for REV100 STK52xx boards + * 01x -> Use AC97 + * use PSC3: Bits 20-23 (mask: 0x00000f00) + * 1100 -> UART/SPI (on FO300 board) * use PSC6: - * on STK52xx: + * on STK52xx and FO300: * use as UART. Pins PSC6_0 to PSC6_3 are used. * Bits 9:11 (mask: 0x00700000): * 101 -> PSC6 : Extended POST test is not available @@ -480,6 +517,8 @@ # define CFG_GPS_PORT_CONFIG 0x91500004 # endif # endif +#elif defined (CONFIG_FO300) +# define CFG_GPS_PORT_CONFIG 0x91502c24 #else /* TMQ5200 Inbetriebnahme-Board */ # define CFG_GPS_PORT_CONFIG 0x81000004 #endif diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h index 50a6ac1e98..daa4d5f6d4 100644 --- a/include/mpc5xxx.h +++ b/include/mpc5xxx.h @@ -235,20 +235,30 @@ /* General Purpose Timers registers */ #define MPC5XXX_GPT0_ENABLE (MPC5XXX_GPT + 0x0) #define MPC5XXX_GPT0_COUNTER (MPC5XXX_GPT + 0x4) +#define MPC5XXX_GPT0_STATUS (MPC5XXX_GPT + 0x0C) #define MPC5XXX_GPT1_ENABLE (MPC5XXX_GPT + 0x10) #define MPC5XXX_GPT1_COUNTER (MPC5XXX_GPT + 0x14) +#define MPC5XXX_GPT1_STATUS (MPC5XXX_GPT + 0x1C) #define MPC5XXX_GPT2_ENABLE (MPC5XXX_GPT + 0x20) #define MPC5XXX_GPT2_COUNTER (MPC5XXX_GPT + 0x24) +#define MPC5XXX_GPT2_STATUS (MPC5XXX_GPT + 0x2C) #define MPC5XXX_GPT3_ENABLE (MPC5XXX_GPT + 0x30) #define MPC5XXX_GPT3_COUNTER (MPC5XXX_GPT + 0x34) +#define MPC5XXX_GPT3_STATUS (MPC5XXX_GPT + 0x3C) #define MPC5XXX_GPT4_ENABLE (MPC5XXX_GPT + 0x40) #define MPC5XXX_GPT4_COUNTER (MPC5XXX_GPT + 0x44) +#define MPC5XXX_GPT4_STATUS (MPC5XXX_GPT + 0x4C) #define MPC5XXX_GPT5_ENABLE (MPC5XXX_GPT + 0x50) +#define MPC5XXX_GPT5_STATUS (MPC5XXX_GPT + 0x5C) #define MPC5XXX_GPT5_COUNTER (MPC5XXX_GPT + 0x54) #define MPC5XXX_GPT6_ENABLE (MPC5XXX_GPT + 0x60) #define MPC5XXX_GPT6_COUNTER (MPC5XXX_GPT + 0x64) +#define MPC5XXX_GPT6_STATUS (MPC5XXX_GPT + 0x6C) #define MPC5XXX_GPT7_ENABLE (MPC5XXX_GPT + 0x70) #define MPC5XXX_GPT7_COUNTER (MPC5XXX_GPT + 0x74) +#define MPC5XXX_GPT7_STATUS (MPC5XXX_GPT + 0x7C) + +#define MPC5XXX_GPT_GPIO_PIN(status) ((0x00000100 & (status)) >> 8) #define MPC5XXX_GPT7_PWMCFG (MPC5XXX_GPT + 0x78) -- cgit v1.2.3 From 5196a7a03bc436435787e1ad7044af94d93a5448 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 18 Aug 2006 23:27:33 +0200 Subject: Minor cleanup --- MAKEALL | 10 +++++----- Makefile | 26 +++++++++++++------------- board/tqm5200/tqm5200.c | 2 +- include/configs/TQM5200.h | 4 ++-- 4 files changed, 21 insertions(+), 21 deletions(-) diff --git a/MAKEALL b/MAKEALL index 48eeaaacf6..720ab03bd3 100755 --- a/MAKEALL +++ b/MAKEALL @@ -25,11 +25,11 @@ LIST_5xx=" \ ######################################################################### LIST_5xxx=" \ - BC3450 cpci5200 EVAL5200 icecube_5100 \ - icecube_5200 lite5200b mcc200 o2dnt \ - pf5200 PM520 TB5200 Total5100 \ - Total5200 Total5200_Rev2 TQM5200 TQM5200_B \ - TQM5200S fo300 \ + BC3450 cpci5200 EVAL5200 fo300 \ + icecube_5100 icecube_5200 lite5200b mcc200 \ + o2dnt pf5200 PM520 TB5200 \ + Total5100 Total5200 Total5200_Rev2 TQM5200 \ + TQM5200_B TQM5200S \ " ######################################################################### diff --git a/Makefile b/Makefile index 4cc7a48ba3..a78f35b621 100644 --- a/Makefile +++ b/Makefile @@ -417,16 +417,22 @@ Total5200_Rev2_lowboot_config: unconfig } @./mkconfig -a Total5200 ppc mpc5xxx total5200 -TQM5200_config \ -TQM5200_B_config \ -TQM5200_B_HIGHBOOT_config \ -TQM5200S_config \ -TQM5200S_HIGHBOOT_config \ -TQM5200_STK100_config \ cam5200_config \ +fo300_config \ MiniFAP_config \ -fo300_config: unconfig +TQM5200S_config \ +TQM5200S_HIGHBOOT_config \ +TQM5200_B_config \ +TQM5200_B_HIGHBOOT_config \ +TQM5200_config \ +TQM5200_STK100_config: unconfig @ >include/config.h + @[ -z "$(findstring cam5200,$@)" ] || \ + { echo "#define CONFIG_CAM5200" >>include/config.h ; \ + echo "#define CONFIG_TQM5200S" >>include/config.h ; \ + echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ + echo "... TQM5200S on Cam5200" ; \ + } @[ -z "$(findstring fo300,$@)" ] || \ { echo "#define CONFIG_FO300" >>include/config.h ; \ echo "... TQM5200 on FO300" ; \ @@ -435,12 +441,6 @@ fo300_config: unconfig { echo "#define CONFIG_MINIFAP" >>include/config.h ; \ echo "... TQM5200_AC on MiniFAP" ; \ } - @[ -z "$(findstring cam5200,$@)" ] || \ - { echo "#define CONFIG_CAM5200" >>include/config.h ; \ - echo "#define CONFIG_TQM5200S" >>include/config.h ; \ - echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ - echo "... TQM5200S on Cam5200" ; \ - } @[ -z "$(findstring STK100,$@)" ] || \ { echo "#define CONFIG_STK52XX_REV100" >>include/config.h ; \ echo "... on a STK52XX.100 base board" ; \ diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index 0026e086cb..c8350ab3b5 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -293,7 +293,7 @@ int checkboard (void) #elif defined(CONFIG_FO300) # define CARRIER_NAME "FO300" #else -# error "Unknown carrier board" +# error "UNKNOWN" #endif puts ( "Board: " MODULE_NAME " (TQ-Components GmbH)\n" diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index f157d42fce..31e3eed68c 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -37,7 +37,7 @@ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ -/* On a Cameron board or on a FO300 board or ... */ +/* On a Cameron or on a FO300 board or ... */ #if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300) #define CONFIG_STK52XX 1 /* ... on a STK52XX board */ #endif @@ -71,7 +71,7 @@ #undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* silent console on PSC1 when S1 */ /* switch is open */ -#endif +#endif /* CONFIG_FO300 */ #ifdef CONFIG_STK52XX #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ -- cgit v1.2.3 From ddde6b7cf8341a15ad46551dc611488e9a3f36e6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Tue, 22 Aug 2006 10:38:18 +0200 Subject: Add a fix for a buggy USB device on the FO300 board. --- CHANGELOG | 2 ++ common/usb_storage.c | 25 +++++++++++++++++++++++++ include/configs/TQM5200.h | 2 +- 3 files changed, 28 insertions(+), 1 deletion(-) diff --git a/CHANGELOG b/CHANGELOG index 82be4e3d77..3c752d1599 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add a fix for a buggy USB device on the FO300 board. + * Add support for WTK FO300 board (TQM5200 based). * Fix TQM834x hang. diff --git a/common/usb_storage.c b/common/usb_storage.c index e64470cb91..69ecf18784 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -916,6 +916,28 @@ static int usb_read_10(ccb *srb,struct us_data *ss, unsigned long start, unsigne } +#ifdef CONFIG_USB_BIN_FIXUP +/* + * Some USB storage devices queried for SCSI identification data respond with + * binary strings, which if output to the console freeze the terminal. The + * workaround is to modify the vendor and product strings read from such + * device with proper values (as reported by 'usb info'). + * + * Vendor and product length limits are taken from the definition of + * block_dev_desc_t in include/part.h. + */ +static void usb_bin_fixup(struct usb_device_descriptor descriptor, + unsigned char vendor[], + unsigned char product[]) { + const unsigned char max_vendor_len = 40; + const unsigned char max_product_len = 20; + if (descriptor.idVendor == 0x0424 && descriptor.idProduct == 0x223a) { + strncpy(vendor, "SMSC", max_vendor_len); + strncpy(product, "Flash Media Cntrller", max_product_len); + } +} +#endif /* CONFIG_USB_BIN_FIXUP */ + #define USB_MAX_READ_BLK 20 unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, unsigned long *buffer) @@ -1171,6 +1193,9 @@ int usb_stor_get_info(struct usb_device *dev,struct us_data *ss,block_dev_desc_t dev_desc->vendor[8] = 0; dev_desc->product[16] = 0; dev_desc->revision[4] = 0; +#ifdef CONFIG_USB_BIN_FIXUP + usb_bin_fixup(dev->descriptor, dev_desc->vendor, dev_desc->product); +#endif /* CONFIG_USB_BIN_FIXUP */ USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n",usb_stor_buf[2],usb_stor_buf[3]); if(usb_test_unit_ready(pccb,ss)) { printf("Device NOT ready\n Request Sense returned %02X %02X %02X\n",pccb->sense_buf[2],pccb->sense_buf[12],pccb->sense_buf[13]); diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index f157d42fce..89ec1bf7a9 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -63,7 +63,7 @@ #define CFG_DEVICE_NULLDEV 1 /* enable null device */ #define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* used to detect S1 switch position */ - +#define CONFIG_USB_BIN_FIXUP 1 /* for a buggy USB device */ #if 0 #define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED 1 /* silent console on PSC1 when S1 */ /* switch is closed */ -- cgit v1.2.3 From ed1cf8456f2a5a4efdb4bb3d04b503d78f410e9c Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 24 Aug 2006 00:26:42 +0200 Subject: Updates for MCC200 / PRS200 boards: - support for configurations with SDRAM or DDR memory, - support for highboot and lowboot - adjusting environment definitions --- CHANGELOG | 5 +++++ Makefile | 31 +++++++++++++++++++++----- board/mcc200/config.mk | 2 +- board/mcc200/mcc200.c | 4 ++++ include/configs/mcc200.h | 57 +++++++++++++++++++++++++++++++++--------------- 5 files changed, 75 insertions(+), 24 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 82be4e3d77..7975cf38a0 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,11 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Updates for MCC200 / PRS200 boards: + - support for configurations with SDRAM or DDR memory, + - support for highboot and lowboot + - adjusting environment definitions + * Add support for WTK FO300 board (TQM5200 based). * Fix TQM834x hang. diff --git a/Makefile b/Makefile index a78f35b621..7542ab4dcc 100644 --- a/Makefile +++ b/Makefile @@ -323,10 +323,15 @@ lite5200b_LOWBOOT_config: unconfig @./mkconfig -a IceCube ppc mpc5xxx icecube mcc200_config \ -mcc200_SDRAM \ -mcc200_highboot \ -mcc200_COM12 \ -mcc200_highboot_SDRAM: unconfig +mcc200_SDRAM_config \ +mcc200_highboot_config \ +mcc200_COM12_config \ +mcc200_COM12_SDRAM_config \ +mcc200_highboot_SDRAM_config \ +prs200_config \ +prs200_DDR_config \ +prs200_highboot_config \ +prs200_highboot_DDR_config: unconfig @ >include/config.h @[ -n "$(findstring highboot,$@)" ] || \ { echo "... with lowboot configuration" ; \ @@ -336,7 +341,18 @@ mcc200_highboot_SDRAM: unconfig echo "... with highboot configuration" ; \ } @[ -n "$(findstring _SDRAM,$@)" ] || \ - { echo "... with DDR" ; \ + { if [ -n "$(findstring mcc200,$@)" ]; \ + then \ + echo "... with DDR" ; \ + else \ + if [ -n "$(findstring _DDR,$@)" ];\ + then \ + echo "... with DDR" ; \ + else \ + echo "#define CONFIG_MCC200_SDRAM" >>include/config.h ;\ + echo "... with SDRAM" ; \ + fi; \ + fi; \ } @[ -z "$(findstring _SDRAM,$@)" ] || \ { echo "#define CONFIG_MCC200_SDRAM" >>include/config.h ; \ @@ -346,7 +362,10 @@ mcc200_highboot_SDRAM: unconfig { echo "#define CONFIG_CONSOLE_COM12" >>include/config.h ; \ echo "... with console on COM12" ; \ } - @./mkconfig -a mcc200 ppc mpc5xxx mcc200 + @[ -z "$(findstring prs200,$@)" ] || \ + { echo "#define CONFIG_PRS200" >>include/config.h ;\ + } + @./mkconfig -n $@ -a mcc200 ppc mpc5xxx mcc200 o2dnt_config: @./mkconfig o2dnt ppc mpc5xxx o2dnt diff --git a/board/mcc200/config.mk b/board/mcc200/config.mk index a8225598cc..192272334a 100644 --- a/board/mcc200/config.mk +++ b/board/mcc200/config.mk @@ -22,7 +22,7 @@ # # -# MCC200 board: +# MCC200, PRS200 boards: # # Valid values for TEXT_BASE are: # diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c index 775030c17c..9c5780998e 100644 --- a/board/mcc200/mcc200.c +++ b/board/mcc200/mcc200.c @@ -197,7 +197,11 @@ long int initdram (int board_type) int checkboard (void) { +#if defined(CONFIG_PRS200) + puts ("Board: PRS200\n"); +#else puts ("Board: MCC200\n"); +#endif return 0; } diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index 563f7978d5..aead49a926 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -55,16 +55,28 @@ * * CONFIG_PSC_CONSOLE must be undefined in this case. */ +#if !defined(CONFIG_PRS200) +/* MCC200 configuration: */ #ifdef CONFIG_CONSOLE_COM12 #define CONFIG_QUART_CONSOLE 6 /* console is on UARTF of QUART2 */ #else #define CONFIG_QUART_CONSOLE 8 /* console is on UARTH of QUART2 */ #endif +#else +/* PRS200 configuration: */ +#undef CONFIG_QUART_CONSOLE +#endif /* CONFIG_PRS200 */ /* * To select console on PSC1, define CONFIG_PSC_CONSOLE as 1 * and undefine CONFIG_QUART_CONSOLE. */ -/*#define CONFIG_PSC_CONSOLE 1 */ /* console is on PSC1 */ +#if !defined(CONFIG_PRS200) +/* MCC200 configuration: */ +#undef CONFIG_PSC_CONSOLE +#else +/* PRS200 configuration: */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#endif #if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) #error "Select only one console device!" #endif @@ -103,33 +115,44 @@ #undef CONFIG_BOOTARGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#ifdef CONFIG_PRS200 +# define CFG__BOARDNAME "prs200" +#else +# define CFG__BOARDNAME "mcc200" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ - "hostname=mcc200\0" \ + "hostname=" CFG__BOARDNAME "\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ + "addcons=etenv bootargs ${bootargs} " \ + "console=${console},${baudrate}\0" \ + "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ + "flash_self=run ramargs addip addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "net_nfs=tftp 200000 ${bootfile};" \ + "run nfsargs addip addcons;bootm\0" \ + "console=ttyS0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=/tftpboot/mcc200/uImage\0" \ - "baudrate=115200\0" \ - "load=tftp 200000 /tftpboot/mcc200/u-boot.bin\0" \ - "update=protect off FFF00000 +${filesize};" \ - "era FFF00000 +${filesize};" \ - "cp.b 200000 FFF00000 ${filesize}\0" \ - "serverip=192.168.1.1\0" \ - "ipaddr=192.168.133.144\0" \ - "netmask=255.255.0.0\0" \ + "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \ + "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \ + "text_base=" MK_STR(TEXT_BASE) "\0" \ + "update=protect off ${text_base} +${filesize};" \ + "era ${text_base} +${filesize};" \ + "cp.b 200000 ${text_base} ${filesize}\0" \ "unlock=yes\0" \ - "ethaddr=00:02:44:7D:73:3B\0" \ "" +#undef MK_STR +#undef XMK_STR #define CONFIG_BOOTCOMMAND "run flash_self" @@ -314,7 +337,7 @@ * One of four SC16C554 UARTs is selected with * A3-A4 (DA5-DA6) lines. */ -#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) +#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) && !defined(CONFIG_PRS200) #define CFG_NS16550_COM1 (CFG_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5) #elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9) #define CFG_NS16550_COM1 (CFG_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5) -- cgit v1.2.3 From 113f64e09ac4905ddc330181c8761a4b29e82394 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 25 Aug 2006 01:38:04 +0200 Subject: Update for MCC200 / PRS200 boards: - auto-adjust console device for Linux. - fix typos. --- CHANGELOG | 4 ++++ Makefile | 2 ++ include/configs/mcc200.h | 6 ++++-- 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index b6dc06784c..af180eed16 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,10 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Update for MCC200 / PRS200 boards: + - auto-adjust console device for Linux. + - fix typos. + * Add a fix for a buggy USB device on the FO300 board. * Updates for MCC200 / PRS200 boards: diff --git a/Makefile b/Makefile index 7542ab4dcc..9bf7c49fb9 100644 --- a/Makefile +++ b/Makefile @@ -327,6 +327,8 @@ mcc200_SDRAM_config \ mcc200_highboot_config \ mcc200_COM12_config \ mcc200_COM12_SDRAM_config \ +mcc200_COM12_highboot_config \ +mcc200_COM12_highboot_SDRAM_config \ mcc200_highboot_SDRAM_config \ prs200_config \ prs200_DDR_config \ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index aead49a926..df3d68e9f7 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -120,8 +120,10 @@ #ifdef CONFIG_PRS200 # define CFG__BOARDNAME "prs200" +# define LINUX_CONSOLE "ttyS0" #else # define CFG__BOARDNAME "mcc200" +# define LINUX_CONSOLE "ttyEU7" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -133,7 +135,7 @@ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ - "addcons=etenv bootargs ${bootargs} " \ + "addcons=setenv bootargs ${bootargs} " \ "console=${console},${baudrate}\0" \ "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ @@ -141,7 +143,7 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};" \ "run nfsargs addip addcons;bootm\0" \ - "console=ttyS0\0" \ + "console=" MK_STR(LINUX_CONSOLE) "\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \ "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \ -- cgit v1.2.3 From 3b0ff842bf70baf1f370c8e76e8f33a0f9904c1b Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 25 Aug 2006 11:47:06 +0200 Subject: Fix typo in MCC200/PRS200 configuration --- include/configs/mcc200.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index df3d68e9f7..14a5bae36c 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -115,15 +115,15 @@ #undef CONFIG_BOOTARGS -#define XMK_STR(x) #x -#define MK_STR(x) XMK_STR(x) +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) #ifdef CONFIG_PRS200 -# define CFG__BOARDNAME "prs200" -# define LINUX_CONSOLE "ttyS0" +# define CFG__BOARDNAME "prs200" +# define CFG__LINUX_CONSOLE "ttyS0" #else -# define CFG__BOARDNAME "mcc200" -# define LINUX_CONSOLE "ttyEU7" +# define CFG__BOARDNAME "mcc200" +# define CFG__LINUX_CONSOLE "ttyEU7" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -143,7 +143,7 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};" \ "run nfsargs addip addcons;bootm\0" \ - "console=" MK_STR(LINUX_CONSOLE) "\0" \ + "console=" LINUX_CONSOLE "\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \ "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \ -- cgit v1.2.3 From 16850919ff8666f20d047cb83b4ee77581336515 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 27 Aug 2006 18:10:01 +0200 Subject: Code cleanup --- CHANGELOG | 2 ++ board/amcc/common/flash.c | 60 +++++++++++++++++++++++------------------------ board/cpu87/cpu87.c | 8 +++---- board/mcc200/mcc200.c | 4 ++-- board/tqm5200/tqm5200.c | 6 ++--- cpu/i386/sc520.c | 2 +- cpu/i386/sc520_asm.S | 12 +++++----- cpu/ppc4xx/440spe_pcie.c | 2 +- include/configs/CPU87.h | 2 +- 9 files changed, 50 insertions(+), 48 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index af180eed16..e326782373 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Code cleanup + * Update for MCC200 / PRS200 boards: - auto-adjust console device for Linux. - fix typos. diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c index a0acbba70c..e6429ecd13 100644 --- a/board/amcc/common/flash.c +++ b/board/amcc/common/flash.c @@ -35,7 +35,7 @@ #include #include -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ /*----------------------------------------------------------------------- * Functions @@ -76,7 +76,7 @@ void flash_print_info(flash_info_t * info) case FLASH_MAN_SST: printf("SST "); break; - case FLASH_MAN_MX: + case FLASH_MAN_MX: printf ("MACRONIX "); break; default: @@ -223,75 +223,75 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info) return (0); /* no or unknown flash */ } - value = addr2[1]; /* device ID */ + value = addr2[1]; /* device ID */ DEBUGF("\nFLASH DEVICEID: %x\n", value); switch (value) { case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B: info->flash_id += FLASH_AM040; info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ + info->size = 0x0080000; /* => 512 KiB */ break; case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B: info->flash_id += FLASH_AM040; info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ + info->size = 0x0080000; /* => 512 KiB */ break; case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B: info->flash_id += FLASH_AM040; info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ + info->size = 0x0080000; /* => 512 KiB */ break; case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D: info->flash_id += FLASH_AMD016; info->sector_count = 32; - info->size = 0x00200000; - break; /* => 2 MB */ + info->size = 0x00200000; /* => 2 MiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C: info->flash_id += FLASH_AMDLV033C; info->sector_count = 64; - info->size = 0x00400000; - break; /* => 4 MB */ + info->size = 0x00400000; /* => 4 MiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T: info->flash_id += FLASH_AM400T; info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ + info->size = 0x00080000; /* => 512 KiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B: info->flash_id += FLASH_AM400B; info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ + info->size = 0x00080000; /* => 512 KiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T: info->flash_id += FLASH_AM800T; info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ + info->size = 0x00100000; /* => 1 MiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B: info->flash_id += FLASH_AM800B; info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ + info->size = 0x00100000; /* => 1 MiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T: info->flash_id += FLASH_AM160T; info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ + info->size = 0x00200000; /* => 2 MiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B: info->flash_id += FLASH_AM160B; info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ + info->size = 0x00200000; /* => 2 MiB */ + break; default: info->flash_id = FLASH_UNKNOWN; @@ -306,7 +306,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info) info->start[i] = base + (i * 0x00010000); } else { if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ + /* set sector offsets for bottom boot block type */ info->start[0] = base + 0x00000000; info->start[1] = base + 0x00004000; info->start[2] = base + 0x00006000; @@ -316,7 +316,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info) base + (i * 0x00010000) - 0x00030000; } } else { - /* set sector offsets for top boot block type */ + /* set sector offsets for top boot block type */ i = info->sector_count - 1; info->start[i--] = base + info->size - 0x00004000; info->start[i--] = base + info->size - 0x00006000; @@ -666,7 +666,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) return (0); /* no or unknown flash */ } - value = addr2[1]; /* device ID */ + value = addr2[1]; /* device ID */ DEBUGF("\nFLASH DEVICEID: %x\n", value); @@ -675,17 +675,17 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T: info->flash_id += FLASH_AM320T; info->sector_count = 71; - info->size = 0x00400000; break; /* => 4 MB */ + info->size = 0x00400000; break; /* => 4 MiB */ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B: info->flash_id += FLASH_AM320B; info->sector_count = 71; - info->size = 0x00400000; break; /* => 4 MB */ + info->size = 0x00400000; break; /* => 4 MiB */ case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT: info->flash_id += FLASH_STMW320DT; info->sector_count = 67; - info->size = 0x00400000; break; /* => 4 MB */ + info->size = 0x00400000; break; /* => 4 MiB */ case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T: info->flash_id += FLASH_MXLV320T; @@ -743,7 +743,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) info->start[i] = base + i * 0x00010000; } else { if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ + /* set sector offsets for bottom boot block type */ info->start[0] = base + 0x00000000; info->start[1] = base + 0x00004000; info->start[2] = base + 0x00006000; @@ -753,7 +753,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) base + (i * 0x00010000) - 0x00030000; } } else { - /* set sector offsets for top boot block type */ + /* set sector offsets for top boot block type */ i = info->sector_count - 1; info->start[i--] = base + info->size - 0x00004000; info->start[i--] = base + info->size - 0x00006000; diff --git a/board/cpu87/cpu87.c b/board/cpu87/cpu87.c index e8c2614eb4..9fecdd0dfe 100644 --- a/board/cpu87/cpu87.c +++ b/board/cpu87/cpu87.c @@ -294,15 +294,15 @@ long int initdram (int board_type) */ size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL, (uchar *) CFG_SDRAM_BASE); - + size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL, (uchar *) CFG_SDRAM_BASE); - + size10 = try_init (memctl, CFG_PSDMR_10COL, CFG_OR2_10COL, (uchar *) CFG_SDRAM_BASE); - + psize = max(size8,max(size9,size10)); - + if (psize == size8) { psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL, (uchar *) CFG_SDRAM_BASE); diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c index 9c5780998e..71a691b5db 100644 --- a/board/mcc200/mcc200.c +++ b/board/mcc200/mcc200.c @@ -265,8 +265,8 @@ int misc_init_r (void) *(volatile int*)MPC5XXX_CS0_CFG &= ~(1 << 6); printf ("Warning: Only 32 of 64 MB of Flash are accessible from U-Boot\n"); flash_info[0].size = 32 << 20; - for (snum = 0, flash_sup_end = gd->bd->bi_flashstart + (32<<20); - flash_info[0].start[snum] < flash_sup_end; + for (snum = 0, flash_sup_end = gd->bd->bi_flashstart + (32<<20); + flash_info[0].start[snum] < flash_sup_end; snum++); flash_info[0].sector_count = snum; } diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index c8350ab3b5..2a0d542ef8 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -743,7 +743,7 @@ int board_early_init_f (void) /* Read in TIMER_3 pin status */ timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS; - + #ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* Force silent console mode if S1 switch * is in closed position (TIMER_3 pin status is LOW). */ @@ -757,5 +757,5 @@ int board_early_init_f (void) return 0; } -#endif -#endif +#endif /* CONFIG_FO300 */ +#endif /* CONFIG_BOARD_EARLY_INIT_F */ diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c index 1c4370b081..d0a7341882 100644 --- a/cpu/i386/sc520.c +++ b/cpu/i386/sc520.c @@ -149,7 +149,7 @@ unsigned long init_sc520_dram(void) /* these memory control registers are set up in the assember part, * in sc520_asm.S, during 'mem_init'. If we muck with them here, * after we are running a stack in RAM, we have troubles. Besides, - * these refresh and delay values are better ? simply specified + * these refresh and delay values are better ? simply specified * outright in the include/configs/{cfg} file since the HW designer * simply dictates it. */ diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S index e1fa37a4a6..8fc713d93b 100644 --- a/cpu/i386/sc520_asm.S +++ b/cpu/i386/sc520_asm.S @@ -462,7 +462,7 @@ emptybank: #if defined CFG_SDRAM_DRCTMCTL /* just have your hardware desinger _GIVE_ you what you need here! */ - movl $DRCTMCTL, %edi + movl $DRCTMCTL, %edi movb $CFG_SDRAM_DRCTMCTL,%al movb (%edi), %al #else @@ -477,7 +477,7 @@ emptybank: #ifdef CFG_SDRAM_CAS_LATENCY_3T orb $0x10, %al #endif - movb %al, (%edi) + movb %al, (%edi) #endif #endif movl $DRCCTL, %edi /* DRAM Control register */ @@ -537,7 +537,7 @@ bank0: movl (%edi), %eax movl %eax, %ebx -done: +done: movl %ebx, %eax #if CFG_SDRAM_ECC_ENABLE @@ -547,7 +547,7 @@ done: movl $0x1, %edi memtest0: movb $0xa5, (%edi) - cmpb $0xa5, (%edi) + cmpb $0xa5, (%edi) jne out shrl $1, %ecx andl %ecx,%ecx @@ -571,11 +571,11 @@ set_ecc: /* enable NMI mapping for ECC */ movl $ECCINT, %edi mov $0x10, %al - movb %al, (%edi) + movb %al, (%edi) /* Turn on ECC */ movl $ECCCTL, %edi mov $0x05, %al - movb %al, (%edi) + movb %al, (%edi) #endif out: movl %ebx, %eax diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c index 2e920aadf0..b2621c2ec5 100644 --- a/cpu/ppc4xx/440spe_pcie.c +++ b/cpu/ppc4xx/440spe_pcie.c @@ -169,7 +169,7 @@ static void ppc440spe_setup_utl(u32 port) { break; } utl_base = (unsigned int *)(CFG_PCIE_BASE + 0x1000 * port); - + /* * Set buffer allocations and then assert VRB and TXE. */ diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index 7a1dada2db..ce969ecdd1 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -527,7 +527,7 @@ PSDMR_LDOTOPRE_1C |\ PSDMR_WRC_1C |\ PSDMR_CL_2) - + /* * Init Memory Controller: * -- cgit v1.2.3 From f5577aae4aa9f245c4c67308fe0f7b3cecf61c93 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 29 Aug 2006 08:04:32 +0200 Subject: Improve DIMM detection for AMCC Yucca 440SPe board Improved the memory DIMM detection for the Yucca 440SPe board for the case where a memory DIMM is falsely detected as present. This issue is seen on some AMCC Yucca 440SPe validation boards if only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is populated and DIMM slot 1 is empty. In this case, U-Boot does not correctly detect that there is only one DIMM memory module installed and will falsely detect two DIMM memory modules are present and therefore U-Boot will not calculate the correct amount of total memory and u-boot will not booting up. Patch by Adam Graham, 24 Aug 2006 --- CHANGELOG | 12 ++++++++++++ board/amcc/yucca/yucca.c | 31 ++++++++++++++++++++++++------- board/amcc/yucca/yucca.h | 3 +++ 3 files changed, 39 insertions(+), 7 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index e326782373..a044b8e37d 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,18 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Improve DIMM detection for AMCC Yucca 440SPe board + Improved the memory DIMM detection for the Yucca 440SPe board for + the case where a memory DIMM is falsely detected as present. + This issue is seen on some AMCC Yucca 440SPe validation boards if + only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is + populated and DIMM slot 1 is empty. In this case, U-Boot does + not correctly detect that there is only one DIMM memory module + installed and will falsely detect two DIMM memory modules are + present and therefore U-Boot will not calculate the correct amount + of total memory and u-boot will not booting up. + Patch by Adam Graham, 24 Aug 2006 + * Code cleanup * Update for MCC200 / PRS200 boards: diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index af12839c2c..65f75756c4 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -562,10 +562,11 @@ int checkboard (void) static long int yucca_probe_for_dimms(void) { - long int dimm_installed[MAXDIMMS]; - long int dimm_num, probe_result; - long int dimms_found = 0; - uchar dimm_addr = IIC0_DIMM0_ADDR; + int dimm_installed[MAXDIMMS]; + int dimm_num, result; + int dimms_found = 0; + uchar dimm_addr = IIC0_DIMM0_ADDR; + uchar dimm_spd_data[MAX_SPD_BYTES]; for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) { /* check if there is a chip at the dimm address */ @@ -577,12 +578,28 @@ static long int yucca_probe_for_dimms(void) dimm_addr = IIC0_DIMM1_ADDR; break; } - probe_result = i2c_probe(dimm_addr); - if (probe_result == 0) { + result = i2c_probe(dimm_addr); + + memset(dimm_spd_data, 0, MAX_SPD_BYTES * sizeof(char)); + if (result == 0) { + /* read first byte of SPD data, if there is any data */ + result = i2c_read(dimm_addr, 0, 1, dimm_spd_data, 1); + + if (result == 0) { + result = dimm_spd_data[0]; + result = result > MAX_SPD_BYTES ? + MAX_SPD_BYTES : result; + result = i2c_read(dimm_addr, 0, 1, + dimm_spd_data, result); + } + } + + if ((result == 0) && + (dimm_spd_data[64] == MICRON_SPD_JEDEC_ID)) { dimm_installed[dimm_num] = TRUE; dimms_found++; - debug("DIMM slot %d: DDR2 SDRAM detected\n",dimm_num); + debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num); } else { dimm_installed[dimm_num] = FALSE; debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num); diff --git a/board/amcc/yucca/yucca.h b/board/amcc/yucca/yucca.h index 66f75847d3..4d13021f38 100644 --- a/board/amcc/yucca/yucca.h +++ b/board/amcc/yucca/yucca.h @@ -60,6 +60,9 @@ extern "C" { #define NUM_TLB_ENTRIES 64 +/* MICRON SPD JEDEC ID Code (first byte) - SPD data byte [64] */ +#define MICRON_SPD_JEDEC_ID 0x2c + /*----------------------------------------------------------------------------+ | TLB specific defines. +----------------------------------------------------------------------------*/ -- cgit v1.2.3 From 2b393b0f0af8402ef43b25c1968bfd29714ddffa Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 29 Aug 2006 08:05:15 +0200 Subject: PCIe endpoint support for AMCC Yucca 440SPe board Patch by Tirumala R Marri, 26 Aug 2006 --- CHANGELOG | 3 + board/amcc/yucca/yucca.c | 80 ++++++++- cpu/ppc4xx/440spe_pcie.c | 416 ++++++++++++++++++++++++++++++++++++++++++++--- cpu/ppc4xx/440spe_pcie.h | 11 +- 4 files changed, 481 insertions(+), 29 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index a044b8e37d..f09be8a1c1 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* PCIe endpoint support for AMCC Yucca 440SPe board + Patch by Tirumala R Marri, 26 Aug 2006 + * Improve DIMM detection for AMCC Yucca 440SPe board Improved the memory DIMM detection for the Yucca 440SPe board for the case where a memory DIMM is falsely detected as present. diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 65f75756c4..cd175265f0 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -32,6 +32,10 @@ #include #include "yucca.h" +#include "../cpu/ppc4xx/440spe_pcie.h" + +#undef PCIE_ENDPOINT +/* #define PCIE_ENDPOINT 1 */ void fpga_init (void); @@ -583,12 +587,12 @@ static long int yucca_probe_for_dimms(void) memset(dimm_spd_data, 0, MAX_SPD_BYTES * sizeof(char)); if (result == 0) { - /* read first byte of SPD data, if there is any data */ + /* read first byte of SPD data, if there is any data */ result = i2c_read(dimm_addr, 0, 1, dimm_spd_data, 1); if (result == 0) { result = dimm_spd_data[0]; - result = result > MAX_SPD_BYTES ? + result = result > MAX_SPD_BYTES ? MAX_SPD_BYTES : result; result = i2c_read(dimm_addr, 0, 1, dimm_spd_data, result); @@ -596,7 +600,7 @@ static long int yucca_probe_for_dimms(void) } if ((result == 0) && - (dimm_spd_data[64] == MICRON_SPD_JEDEC_ID)) { + (dimm_spd_data[64] == MICRON_SPD_JEDEC_ID)) { dimm_installed[dimm_num] = TRUE; dimms_found++; debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num); @@ -1029,6 +1033,57 @@ void yucca_setup_pcie_fpga_rootpoint(int port) out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C)); } +/* + * For the given slot, set endpoint mode, send power to the slot, + * turn on the green LED and turn off the yellow LED, enable the clock + * .In end point mode reset bit is read only. + */ +void yucca_setup_pcie_fpga_endpoint(int port) +{ + u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; + + switch(port) { + case 0: + rootpoint = FPGA_REG1C_PE0_ROOTPOINT; + endpoint = 0; + power = FPGA_REG1A_PE0_PWRON; + green_led = FPGA_REG1A_PE0_GLED; + clock = FPGA_REG1A_PE0_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE0_YLED; + reset_off = FPGA_REG1C_PE0_PERST; + break; + case 1: + rootpoint = 0; + endpoint = FPGA_REG1C_PE1_ENDPOINT; + power = FPGA_REG1A_PE1_PWRON; + green_led = FPGA_REG1A_PE1_GLED; + clock = FPGA_REG1A_PE1_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE1_YLED; + reset_off = FPGA_REG1C_PE1_PERST; + break; + case 2: + rootpoint = 0; + endpoint = FPGA_REG1C_PE2_ENDPOINT; + power = FPGA_REG1A_PE2_PWRON; + green_led = FPGA_REG1A_PE2_GLED; + clock = FPGA_REG1A_PE2_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE2_YLED; + reset_off = FPGA_REG1C_PE2_PERST; + break; + + default: + return; + } + + out_be16((u16 *)FPGA_REG1A, + ~(power | clock | green_led) & + (yellow_led | in_be16((u16 *)FPGA_REG1A))); + + out_be16((u16 *)FPGA_REG1C, + ~(rootpoint | reset_off) & + (endpoint | in_be16((u16 *)FPGA_REG1C))); +} + static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; @@ -1048,9 +1103,13 @@ void pcie_setup_hoses(void) if (!yucca_pcie_card_present(i)) continue; +#ifdef PCIE_ENDPOINT + yucca_setup_pcie_fpga_endpoint(i); + if (ppc440spe_init_pcie_endport(i)) { +#else yucca_setup_pcie_fpga_rootpoint(i); - if (ppc440spe_init_pcie_rootport(i)) { +#endif printf("PCIE%d: initialization failed\n", i); continue; } @@ -1070,8 +1129,19 @@ void pcie_setup_hoses(void) hose->region_count = 1; pci_register_hose(hose); - ppc440spe_setup_pcie(hose, i); +#ifdef PCIE_ENDPOINT + ppc440spe_setup_pcie_endpoint(hose, i); + /* + * Reson for no scanning is endpoint can not generate + * upstream configuration accesses. + */ +#else + ppc440spe_setup_pcie_rootpoint(hose, i); + /* + * Config access can only go down stream + */ hose->last_busno = pci_hose_scan(hose); +#endif } } #endif /* defined(CONFIG_PCI) */ diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c index b2621c2ec5..6130cd2839 100644 --- a/cpu/ppc4xx/440spe_pcie.c +++ b/cpu/ppc4xx/440spe_pcie.c @@ -270,7 +270,7 @@ int ppc440spe_init_pcie(void) SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24)); udelay(3); - while(time_out) { + while (time_out) { if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) { time_out--; udelay(1); @@ -284,6 +284,40 @@ int ppc440spe_init_pcie(void) return 0; } +/* + * Yucca board as End point and root point setup + * and + * testing inbound and out bound windows + * + * YUCCA board can be plugged into another yucca board or you can get PCI-E + * cable which can be used to setup loop back from one port to another port. + * Please rememeber that unless there is a endpoint plugged in to root port it + * will not initialize. It is the same in case of endpoint , unless there is + * root port attached it will not initialize. + * + * In this release of software all the PCI-E ports are configured as either + * endpoint or rootpoint.In future we will have support for selective ports + * setup as endpoint and root point in single board. + * + * Once your board came up as root point , you can verify by reading + * /proc/bus/pci/devices. Where you can see the configuration registers + * of end point device attached to the port. + * + * Enpoint cofiguration can be verified by connecting Yucca board to any + * host or another yucca board. Then try to scan the device. In case of + * linux use "lspci" or appripriate os command. + * + * How do I verify the inbound and out bound windows ?(yucca to yucca) + * in this configuration inbound and outbound windows are setup to access + * sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address + * is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000, + * This is waere your POM(PLB out bound memory window) mapped. then + * read the data from other yucca board's u-boot prompt at address + * 0x9000 0000(SRAM). Data should match. + * In case of inbound , write data to u-boot command prompt at 0xb000 0000 + * which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check + * data at 0x9000 0000(SRAM).Data should match. + */ int ppc440spe_init_pcie_rootport(int port) { static int core_init; @@ -326,7 +360,7 @@ int ppc440spe_init_pcie_rootport(int port) SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000); SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000); SDR_WRITE(PESDR0_RCSSET, - (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); break; case 1: @@ -339,7 +373,7 @@ int ppc440spe_init_pcie_rootport(int port) SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000); SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000); SDR_WRITE(PESDR1_RCSSET, - (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); break; case 2: @@ -351,6 +385,225 @@ int ppc440spe_init_pcie_rootport(int port) SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000); SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000); SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000); + SDR_WRITE(PESDR2_RCSSET, + (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + } + /* + * Notice: the following delay has critical impact on device + * initialization - if too short (<50ms) the link doesn't get up. + */ + mdelay(100); + + switch (port) { + case 0: + val = SDR_READ(PESDR0_RCSSTS); + break; + case 1: + val = SDR_READ(PESDR1_RCSSTS); + break; + case 2: + val = SDR_READ(PESDR2_RCSSTS); + break; + } + + if (val & (1 << 20)) { + printf("PCIE%d: PGRST failed %08x\n", port, val); + return -1; + } + + /* + * Verify link is up + */ + val = 0; + switch (port) { + case 0: + val = SDR_READ(PESDR0_LOOP); + break; + case 1: + val = SDR_READ(PESDR1_LOOP); + break; + case 2: + val = SDR_READ(PESDR2_LOOP); + break; + } + if (!(val & 0x00001000)) { + printf("PCIE%d: link is not up.\n", port); + return -1; + } + + /* + * Setup UTL registers - but only on revA! + * We use default settings for revB chip. + */ + if (!ppc440spe_revB()) + ppc440spe_setup_utl(port); + + /* + * We map PCI Express configuration access into the 512MB regions + * + * NOTICE: revB is very strict about PLB real addressess and ranges to + * be mapped for config space; it seems to only work with d_nnnn_nnnn + * range (hangs the core upon config transaction attempts when set + * otherwise) while revA uses c_nnnn_nnnn. + * + * For revA: + * PCIE0: 0xc_4000_0000 + * PCIE1: 0xc_8000_0000 + * PCIE2: 0xc_c000_0000 + * + * For revB: + * PCIE0: 0xd_0000_0000 + * PCIE1: 0xd_2000_0000 + * PCIE2: 0xd_4000_0000 + */ + + switch (port) { + case 0: + if (ppc440spe_revB()) { + mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000d); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x00000000); + } else { + /* revA */ + mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000); + } + mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */ + break; + + case 1: + if (ppc440spe_revB()) { + mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000d); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x20000000); + } else { + mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000); + } + mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */ + break; + + case 2: + if (ppc440spe_revB()) { + mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000d); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0x40000000); + } else { + mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000); + } + mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */ + break; + } + + /* + * Check for VC0 active and assert RDY. + */ + attempts = 10; + switch (port) { + case 0: + while(!(SDR_READ(PESDR0_RCSSTS) & (1 << 16))) { + if (!(attempts--)) { + printf("PCIE0: VC0 not active\n"); + return -1; + } + mdelay(1000); + } + SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20); + break; + case 1: + while(!(SDR_READ(PESDR1_RCSSTS) & (1 << 16))) { + if (!(attempts--)) { + printf("PCIE1: VC0 not active\n"); + return -1; + } + mdelay(1000); + } + + SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20); + break; + case 2: + while(!(SDR_READ(PESDR2_RCSSTS) & (1 << 16))) { + if (!(attempts--)) { + printf("PCIE2: VC0 not active\n"); + return -1; + } + mdelay(1000); + } + + SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20); + break; + } + mdelay(100); + + return 0; +} + +int ppc440spe_init_pcie_endport(int port) +{ + static int core_init; + volatile u32 val = 0; + int attempts; + + if (!core_init) { + ++core_init; + if (ppc440spe_init_pcie()) + return -1; + } + + /* + * Initialize various parts of the PCI Express core for our port: + * + * - Set as a end port and enable max width + * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4). + * - Set up UTL configuration. + * - Increase SERDES drive strength to levels suggested by AMCC. + * - De-assert RSTPYN, RSTDL and RSTGU. + * + * NOTICE for revB chip: PESDRn_UTLSET2 is not set - we leave it with + * default setting 0x11310000. The register has new fields, + * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core + * hang. + */ + switch (port) { + case 0: + SDR_WRITE(PESDR0_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X8 << 12); + + SDR_WRITE(PESDR0_UTLSET1, 0x20222222); + if (!ppc440spe_revB()) + SDR_WRITE(PESDR0_UTLSET2, 0x11000000); + SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000); + SDR_WRITE(PESDR0_RCSSET, + (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + + case 1: + SDR_WRITE(PESDR1_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X4 << 12); + SDR_WRITE(PESDR1_UTLSET1, 0x20222222); + if (!ppc440spe_revB()) + SDR_WRITE(PESDR1_UTLSET2, 0x11000000); + SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000); + SDR_WRITE(PESDR1_RCSSET, + (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + + case 2: + SDR_WRITE(PESDR2_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X4 << 12); + SDR_WRITE(PESDR2_UTLSET1, 0x20222222); + if (!ppc440spe_revB()) + SDR_WRITE(PESDR2_UTLSET2, 0x11000000); + SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000); SDR_WRITE(PESDR2_RCSSET, (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); break; @@ -418,7 +671,6 @@ int ppc440spe_init_pcie_rootport(int port) * PCIE1: 0xd_2000_0000 * PCIE2: 0xd_4000_0000 */ - switch (port) { case 0: if (ppc440spe_revB()) { @@ -498,29 +750,33 @@ int ppc440spe_init_pcie_rootport(int port) return 0; } -void ppc440spe_setup_pcie(struct pci_controller *hose, int port) +void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port) { volatile void *mbase = NULL; + volatile void *rmbase = NULL; pci_set_ops(hose, - pcie_read_config_byte, - pcie_read_config_word, - pcie_read_config_dword, - pcie_write_config_byte, - pcie_write_config_word, - pcie_write_config_dword); - - switch(port) { + pcie_read_config_byte, + pcie_read_config_word, + pcie_read_config_dword, + pcie_write_config_byte, + pcie_write_config_word, + pcie_write_config_dword); + + switch (port) { case 0: mbase = (u32 *)CFG_PCIE0_XCFGBASE; + rmbase = (u32 *)CFG_PCIE0_CFGBASE; hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE; break; case 1: mbase = (u32 *)CFG_PCIE1_XCFGBASE; + rmbase = (u32 *)CFG_PCIE1_CFGBASE; hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE; break; case 2: mbase = (u32 *)CFG_PCIE2_XCFGBASE; + rmbase = (u32 *)CFG_PCIE2_CFGBASE; hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE; break; } @@ -528,14 +784,9 @@ void ppc440spe_setup_pcie(struct pci_controller *hose, int port) /* * Set bus numbers on our root port */ - if (ppc440spe_revB()) { - out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0); - out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1); - out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1); - } else { - out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0); - out_8((u8 *)mbase + PCI_SECONDARY_BUS, 0); - } + out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0); + out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1); + out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1); /* * Set up outbound translation to hose->mem_space from PLB @@ -544,8 +795,7 @@ void ppc440spe_setup_pcie(struct pci_controller *hose, int port) * subregions and to enable the outbound translation. */ out_le32(mbase + PECFG_POM0LAH, 0x00000000); - out_le32(mbase + PECFG_POM0LAL, (CFG_PCIE_MEMBASE + - port * CFG_PCIE_MEMSIZE)); + out_le32(mbase + PECFG_POM0LAL, 0x00000000); switch (port) { case 0: @@ -579,14 +829,134 @@ void ppc440spe_setup_pcie(struct pci_controller *hose, int port) out_le32(mbase + PCI_BASE_ADDRESS_1, 0); out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc); out_le32(mbase + PECFG_BAR0LMPA, 0); + + out_le32(mbase + PECFG_PIM01SAH, 0xffff0000); + out_le32(mbase + PECFG_PIM01SAL, 0x00000000); out_le32(mbase + PECFG_PIM0LAL, 0); out_le32(mbase + PECFG_PIM0LAH, 0); + out_le32(mbase + PECFG_PIM1LAL, 0x00000000); + out_le32(mbase + PECFG_PIM1LAH, 0x00000004); + out_le32(mbase + PECFG_PIMEN, 0x1); + + /* Enable I/O, Mem, and Busmaster cycles */ + out_le16((u16 *)(mbase + PCI_COMMAND), + in_le16((u16 *)(mbase + PCI_COMMAND)) | + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + printf("PCIE:%d successfully set as rootpoint\n",port); +} + +int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port) +{ + volatile void *mbase = NULL; + int attempts = 0; + + pci_set_ops(hose, + pcie_read_config_byte, + pcie_read_config_word, + pcie_read_config_dword, + pcie_write_config_byte, + pcie_write_config_word, + pcie_write_config_dword); + + switch (port) { + case 0: + mbase = (u32 *)CFG_PCIE0_XCFGBASE; + hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE; + break; + case 1: + mbase = (u32 *)CFG_PCIE1_XCFGBASE; + hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE; + break; + case 2: + mbase = (u32 *)CFG_PCIE2_XCFGBASE; + hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE; + break; + } + + /* + * Set up outbound translation to hose->mem_space from PLB + * addresses at an offset of 0xd_0000_0000. We set the low + * bits of the mask to 11 to turn off splitting into 8 + * subregions and to enable the outbound translation. + */ + out_le32(mbase + PECFG_POM0LAH, 0x00001ff8); + out_le32(mbase + PECFG_POM0LAL, 0x00001000); + + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CFG_PCIE_MEMBASE + + port * CFG_PCIE_MEMSIZE); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0), + ~(CFG_PCIE_MEMSIZE - 1) | 3); + break; + case 1: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), (CFG_PCIE_MEMBASE + + port * CFG_PCIE_MEMSIZE)); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1), + ~(CFG_PCIE_MEMSIZE - 1) | 3); + break; + case 2: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), (CFG_PCIE_MEMBASE + + port * CFG_PCIE_MEMSIZE)); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2), + ~(CFG_PCIE_MEMSIZE - 1) | 3); + break; + } + + /* Set up 16GB inbound memory window at 0 */ + out_le32(mbase + PCI_BASE_ADDRESS_0, 0); + out_le32(mbase + PCI_BASE_ADDRESS_1, 0); + out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc); + out_le32(mbase + PECFG_BAR0LMPA, 0); + out_le32(mbase + PECFG_PIM0LAL, 0x00000000); + out_le32(mbase + PECFG_PIM0LAH, 0x00000004); /* pointing to SRAM */ out_le32(mbase + PECFG_PIMEN, 0x1); /* Enable I/O, Mem, and Busmaster cycles */ out_le16((u16 *)(mbase + PCI_COMMAND), in_le16((u16 *)(mbase + PCI_COMMAND)) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + out_le16(mbase + 0x200,0xcaad); /* Setting vendor ID */ + out_le16(mbase + 0x202,0xfeed); /* Setting device ID */ + attempts = 10; + switch (port) { + case 0: + while (!(SDR_READ(PESDR0_RCSSTS) & (1 << 8))) { + if (!(attempts--)) { + printf("PCIE0: BMEN is not active\n"); + return -1; + } + mdelay(1000); + } + break; + case 1: + while (!(SDR_READ(PESDR1_RCSSTS) & (1 << 8))) { + if (!(attempts--)) { + printf("PCIE1: BMEN is not active\n"); + return -1; + } + mdelay(1000); + } + break; + case 2: + while (!(SDR_READ(PESDR2_RCSSTS) & (1 << 8))) { + if (!(attempts--)) { + printf("PCIE2: BMEN is not active\n"); + return -1; + } + mdelay(1000); + } + break; + } + printf("PCIE:%d successfully set as endpoint\n",port); + + return 0; } #endif /* CONFIG_PCI */ #endif /* CONFIG_440SPE */ diff --git a/cpu/ppc4xx/440spe_pcie.h b/cpu/ppc4xx/440spe_pcie.h index 47df7620a6..2becc77722 100644 --- a/cpu/ppc4xx/440spe_pcie.h +++ b/cpu/ppc4xx/440spe_pcie.h @@ -139,9 +139,17 @@ */ #define PECFG_BAR0LMPA 0x210 #define PECFG_BAR0HMPA 0x214 +#define PECFG_BAR1MPA 0x218 +#define PECFG_BAR2MPA 0x220 + #define PECFG_PIMEN 0x33c #define PECFG_PIM0LAL 0x340 #define PECFG_PIM0LAH 0x344 +#define PECFG_PIM1LAL 0x348 +#define PECFG_PIM1LAH 0x34c +#define PECFG_PIM01SAL 0x350 +#define PECFG_PIM01SAH 0x354 + #define PECFG_POM0LAL 0x380 #define PECFG_POM0LAH 0x384 @@ -156,7 +164,8 @@ int ppc440spe_init_pcie(void); int ppc440spe_init_pcie_rootport(int port); void yucca_setup_pcie_fpga_rootpoint(int port); -void ppc440spe_setup_pcie(struct pci_controller *hose, int port); +void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port); +int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port); int yucca_pcie_card_present(int port); int pcie_hose_scan(struct pci_controller *hose, int bus); #endif /* __440SPE_PCIE_H */ -- cgit v1.2.3 From 21a9cc028d00c50f542e25d58201e3debecd5166 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 29 Aug 2006 10:49:11 +0200 Subject: Fix typo. --- CHANGELOG | 2 ++ include/configs/mcc200.h | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/CHANGELOG b/CHANGELOG index e326782373..46e77e7c46 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix typo. + * Code cleanup * Update for MCC200 / PRS200 boards: diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index 14a5bae36c..fc5781e438 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -143,7 +143,7 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};" \ "run nfsargs addip addcons;bootm\0" \ - "console=" LINUX_CONSOLE "\0" \ + "console=" CFG__LINUX_CONSOLE "\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \ "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \ -- cgit v1.2.3 From 0fd30252c840ee54d2a80475d6504766d43b8add Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 30 Aug 2006 23:02:10 +0200 Subject: Make the serial driver framework work with CONFIG_SERIAL_MULTI enabled --- CHANGELOG | 3 ++ common/serial.c | 28 +++++++++++- drivers/ns9750_serial.c | 4 ++ drivers/serial.c | 111 +++++++++++++++++++++++++++++++++++++++++++++++ include/configs/mcc200.h | 7 ++- include/serial.h | 7 +++ 6 files changed, 157 insertions(+), 3 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 02ccd30a3e..87341755e2 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Make the serial driver framework work with CONFIG_SERIAL_MULTI + enabled + * PCIe endpoint support for AMCC Yucca 440SPe board Patch by Tirumala R Marri, 26 Aug 2006 diff --git a/common/serial.c b/common/serial.c index 38057d21f6..605d4e34be 100644 --- a/common/serial.c +++ b/common/serial.c @@ -42,7 +42,19 @@ struct serial_device *default_serial_console (void) return &serial_scc_device; #elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \ || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx) -#if defined(CONFIG_UART1_CONSOLE) +#if defined(CONFIG_CONS_INDEX) && defined(CFG_NS16550_SERIAL) +#if (CONFIG_CONS_INDEX==1) + return &eserial1_device; +#elif (CONFIG_CONS_INDEX==2) + return &eserial2_device; +#elif (CONFIG_CONS_INDEX==3) + return &eserial3_device; +#elif (CONFIG_CONS_INDEX==4) + return &eserial4_device; +#else +#error "Bad CONFIG_CONS_INDEX." +#endif +#elif defined(CONFIG_UART1_CONSOLE) return &serial1_device; #else return &serial0_device; @@ -84,6 +96,20 @@ void serial_initialize (void) serial_register(&serial1_device); #endif +#if defined(CFG_NS16550_SERIAL) +#if defined(CFG_NS16550_COM1) + serial_register(&eserial1_device); +#endif +#if defined(CFG_NS16550_COM2) + serial_register(&eserial2_device); +#endif +#if defined(CFG_NS16550_COM3) + serial_register(&eserial3_device); +#endif +#if defined(CFG_NS16550_COM4) + serial_register(&eserial4_device); +#endif +#endif /* CFG_NS16550_SERIAL */ serial_assign (default_serial_console ()->name); } diff --git a/drivers/ns9750_serial.c b/drivers/ns9750_serial.c index 8dff367745..02c0d39520 100644 --- a/drivers/ns9750_serial.c +++ b/drivers/ns9750_serial.c @@ -35,6 +35,10 @@ DECLARE_GLOBAL_DATA_PTR; +#if !defined(CONFIG_CONS_INDEX) +#error "No console index specified." +#endif + #define CONSOLE CONFIG_CONS_INDEX static unsigned int calcBitrateRegister( void ); diff --git a/drivers/serial.c b/drivers/serial.c index 228781b46a..8d1ae96bf8 100644 --- a/drivers/serial.c +++ b/drivers/serial.c @@ -30,10 +30,20 @@ #include #endif +#if defined (CONFIG_SERIAL_MULTI) +#include +#endif + DECLARE_GLOBAL_DATA_PTR; #if !defined(CONFIG_CONS_INDEX) +#if defined (CONFIG_SERIAL_MULTI) +/* with CONFIG_SERIAL_MULTI we might have no console + * on these devices + */ +#else #error "No console index specified." +#endif /* CONFIG_SERIAL_MULTI */ #elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4) #error "Invalid console index value." #endif @@ -75,7 +85,42 @@ static NS16550_t serial_ports[4] = { }; #define PORT serial_ports[port-1] +#if defined(CONFIG_CONS_INDEX) #define CONSOLE (serial_ports[CONFIG_CONS_INDEX-1]) +#endif + +#if defined(CONFIG_SERIAL_MULTI) + +/* Multi serial device functions */ +#define DECLARE_ESERIAL_FUNCTIONS(port) \ + int eserial##port##_init (void) {\ + int clock_divisor; \ + clock_divisor = calc_divisor(serial_ports[port-1]); \ + NS16550_init(serial_ports[port-1], clock_divisor); \ + return(0);}\ + void eserial##port##_setbrg (void) {\ + serial_setbrg_dev(port);}\ + int eserial##port##_getc (void) {\ + return serial_getc_dev(port);}\ + int eserial##port##_tstc (void) {\ + return serial_tstc_dev(port);}\ + void eserial##port##_putc (const char c) {\ + serial_putc_dev(port, c);}\ + void eserial##port##_puts (const char *s) {\ + serial_puts_dev(port, s);} + +/* Serial device descriptor */ +#define INIT_ESERIAL_STRUCTURE(port,name,bus) {\ + name,\ + bus,\ + eserial##port##_init,\ + eserial##port##_setbrg,\ + eserial##port##_getc,\ + eserial##port##_tstc,\ + eserial##port##_putc,\ + eserial##port##_puts, } + +#endif /* CONFIG_SERIAL_MULTI */ static int calc_divisor (NS16550_t port) { @@ -103,6 +148,7 @@ static int calc_divisor (NS16550_t port) } +#if !defined(CONFIG_SERIAL_MULTI) int serial_init (void) { int clock_divisor; @@ -130,6 +176,7 @@ int serial_init (void) return (0); } +#endif void _serial_putc(const char c,const int port) @@ -176,40 +223,104 @@ _serial_setbrg (const int port) NS16550_reinit(PORT, clock_divisor); } +#if defined(CONFIG_SERIAL_MULTI) +static inline void +serial_putc_dev(unsigned int dev_index,const char c) +{ + _serial_putc(c,dev_index); +} +#else void serial_putc(const char c) { _serial_putc(c,CONFIG_CONS_INDEX); } +#endif +#if defined(CONFIG_SERIAL_MULTI) +static inline void +serial_putc_raw_dev(unsigned int dev_index,const char c) +{ + _serial_putc_raw(c,dev_index); +} +#else void serial_putc_raw(const char c) { _serial_putc_raw(c,CONFIG_CONS_INDEX); } +#endif +#if defined(CONFIG_SERIAL_MULTI) +static inline void +serial_puts_dev(unsigned int dev_index,const char *s) +{ + _serial_puts(s,dev_index); +} +#else void serial_puts(const char *s) { _serial_puts(s,CONFIG_CONS_INDEX); } +#endif +#if defined(CONFIG_SERIAL_MULTI) +static inline int +serial_getc_dev(unsigned int dev_index) +{ + return _serial_getc(dev_index); +} +#else int serial_getc(void) { return _serial_getc(CONFIG_CONS_INDEX); } +#endif +#if defined(CONFIG_SERIAL_MULTI) +static inline int +serial_tstc_dev(unsigned int dev_index) +{ + return _serial_tstc(dev_index); +} +#else int serial_tstc(void) { return _serial_tstc(CONFIG_CONS_INDEX); } +#endif +#if defined(CONFIG_SERIAL_MULTI) +static inline void +serial_setbrg_dev(unsigned int dev_index) +{ + _serial_setbrg(dev_index); +} +#else void serial_setbrg(void) { _serial_setbrg(CONFIG_CONS_INDEX); } +#endif + +#if defined(CONFIG_SERIAL_MULTI) + +DECLARE_ESERIAL_FUNCTIONS(1); +struct serial_device eserial1_device = + INIT_ESERIAL_STRUCTURE(1,"eserial0","EUART1"); +DECLARE_ESERIAL_FUNCTIONS(2); +struct serial_device eserial2_device = + INIT_ESERIAL_STRUCTURE(2,"eserial1","EUART2"); +DECLARE_ESERIAL_FUNCTIONS(3); +struct serial_device eserial3_device = + INIT_ESERIAL_STRUCTURE(3,"eserial2","EUART3"); +DECLARE_ESERIAL_FUNCTIONS(4); +struct serial_device eserial4_device = + INIT_ESERIAL_STRUCTURE(4,"eserial3","EUART4"); +#endif /* CONFIG_SERIAL_MULTI */ #endif diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index fc5781e438..61014ecd1f 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -72,12 +72,15 @@ */ #if !defined(CONFIG_PRS200) /* MCC200 configuration: */ -#undef CONFIG_PSC_CONSOLE +#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_PSC_CONSOLE 1 /* PSC1 may be COM */ +#define CONFIG_PSC_CONSOLE2 2 /* PSC2 is PSoC */ #else /* PRS200 configuration: */ #define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ #endif -#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) +#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) && \ + !defined(CONFIG_SERIAL_MULTI) #error "Select only one console device!" #endif #define CONFIG_BAUDRATE 115200 diff --git a/include/serial.h b/include/serial.h index 8c7b1c26c1..48800595d7 100644 --- a/include/serial.h +++ b/include/serial.h @@ -26,6 +26,13 @@ extern struct serial_device * default_serial_console (void); || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx) extern struct serial_device serial0_device; extern struct serial_device serial1_device; +#if defined(CFG_NS16550_SERIAL) +extern struct serial_device eserial1_device; +extern struct serial_device eserial2_device; +extern struct serial_device eserial3_device; +extern struct serial_device eserial4_device; +#endif /* CFG_NS16550_SERIAL */ + #endif -- cgit v1.2.3 From e8143e72e1cbe2f771258533e26ee2105a8768a7 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 30 Aug 2006 23:09:00 +0200 Subject: Add splashscreen support for MCC200 board. --- CHANGELOG | 2 + board/mcc200/Makefile | 2 +- board/mcc200/lcd.c | 190 +++++++++++++++++++++++++++++++++++++++++++++++ common/lcd.c | 28 ++++++- cpu/mpc5xxx/serial.c | 56 ++++++++++++++ include/configs/mcc200.h | 15 ++++ include/lcd.h | 9 ++- 7 files changed, 297 insertions(+), 5 deletions(-) create mode 100644 board/mcc200/lcd.c diff --git a/CHANGELOG b/CHANGELOG index 87341755e2..7df923c047 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add splashscreen support for MCC200 board. + * Make the serial driver framework work with CONFIG_SERIAL_MULTI enabled diff --git a/board/mcc200/Makefile b/board/mcc200/Makefile index 7fdc088e9c..bd75859f61 100644 --- a/board/mcc200/Makefile +++ b/board/mcc200/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a -OBJS := $(BOARD).o +OBJS := $(BOARD).o lcd.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c new file mode 100644 index 0000000000..b2625160a5 --- /dev/null +++ b/board/mcc200/lcd.c @@ -0,0 +1,190 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#ifdef CONFIG_LCD + +#define SWAPPED_LCD +/* + * The name of the device used for communication + * with the PSoC. + */ +#define PSOC_PSC MPC5XXX_PSC2 +#define PSOC_BAUD 500000UL + +#define RTS_ASSERT 1 +#define RTS_NEGATE 0 +#define CTS_ASSERT 1 +#define CTS_NEGATE 0 + +/* + * Dimensions in pixels + */ +#define LCD_WIDTH 160 +#define LCD_HEIGHT 100 + +/* + * Dimensions in bytes + */ +#define LCD_BUF_SIZE ((LCD_WIDTH*LCD_HEIGHT)>>3) + +#if LCD_BPP != LCD_MONOCHROME +#error "MCC200 support only monochrome displays (1 bpp)!" +#endif + +#define PSOC_RETRIES 10 /* each of PSOC_WAIT_TIME */ +#define PSOC_WAIT_TIME 10 /* usec */ + +DECLARE_GLOBAL_DATA_PTR; + +/* + * LCD information + */ +vidinfo_t panel_info = { + LCD_WIDTH, LCD_HEIGHT, LCD_BPP +}; + +int lcd_line_length; + +int lcd_color_fg; +int lcd_color_bg; + +/* + * Frame buffer memory information + */ +void *lcd_base; /* Start of framebuffer memory */ +void *lcd_console_address; /* Start of console buffer */ + +short console_col = 0; +short console_row = 0; + +/* + * The device we use to communicate with PSoC + */ +int serial_inited = 0; + +/* + * Exported functions + */ +void lcd_initcolregs (void); +void lcd_ctrl_init (void *lcdbase); +void lcd_enable (void); + +/* + * Imported functions to support the PSoC protocol + */ +extern int serial_init_dev (unsigned long dev_base); +extern void serial_setrts_dev (unsigned long dev_base, int s); +extern int serial_getcts_dev (unsigned long dev_base); +extern void serial_putc_raw_dev(unsigned long dev_base, const char c); + +/* + * Just stubs for our driver, needed for compiling compabilty with + * the common LCD driver code. + */ +void lcd_initcolregs (void) +{ +} + +void lcd_ctrl_init (void *lcdbase) +{ +} + +/* + * Function sends the contents of the frame-buffer to the LCD + */ +void lcd_enable (void) +{ + int i, retries, fb_size; + + if (!serial_inited) { + unsigned long baud; + + baud = gd->baudrate; + gd->baudrate = PSOC_BAUD; + serial_init_dev(PSOC_PSC); + gd->baudrate = baud; + serial_setrts_dev (PSOC_PSC, RTS_ASSERT); + serial_inited = 1; + } + + /* + * Implement PSoC communication protocol: + * 1. Assert RTS, wait CTS assertion + * 2. Transmit data + * 3. Negate RTS, wait CTS negation + */ + + /* 1 */ + serial_setrts_dev (PSOC_PSC, RTS_ASSERT); + for (retries = PSOC_RETRIES; retries; retries--) { + if (serial_getcts_dev(PSOC_PSC) == CTS_ASSERT) + break; + udelay (PSOC_WAIT_TIME); + } + if (!retries) { + printf ("%s Error: PSoC doesn't respond on " + "RTS ASSERT\n", __FUNCTION__); + } + + /* 2 */ + fb_size = panel_info.vl_row * (panel_info.vl_col >> 3); + +#if !defined(SWAPPED_LCD) + for (i=0; i> 3); + for (y=0; y>4 & 0x0F)); + serial_putc_raw_dev (PSOC_PSC, (p[i+x+3]<<4 & 0xF0) | (p[i+x+4]>>4 & 0x0F)); + serial_putc_raw_dev (PSOC_PSC, (p[i+x+4]<<4 & 0xF0) | (p[i+x]>>4 & 0x0F)); + serial_putc_raw_dev (PSOC_PSC, (p[i+x]<<4 & 0xF0) | (p[i+x+1]>>4 & 0x0F)); + serial_putc_raw_dev (PSOC_PSC, (p[i+x+1]<<4 & 0xF0) | (p[i+x+2]>>4 & 0x0F)); + } + } + } +#endif + + /* 3 */ + serial_setrts_dev (PSOC_PSC, RTS_NEGATE); + for (retries = PSOC_RETRIES; retries; retries--) { + if (serial_getcts_dev(PSOC_PSC) == CTS_NEGATE) + break; + udelay (PSOC_WAIT_TIME); + } + if (!retries) { + printf ("%s Error: PSoC doesn't respond on " + "RTS NEGATE\n", __FUNCTION__); + } + + return; +} +#endif /* CONFIG_LCD */ diff --git a/common/lcd.c b/common/lcd.c index 0be1912a35..d79350f234 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -585,6 +585,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) uchar *bmap; ushort padded_line; unsigned long width, height; + unsigned long pwidth = panel_info.vl_col; unsigned colors,bpix; unsigned long compression; #if defined(CONFIG_PXA250) @@ -628,6 +629,8 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) cmap = (ushort *)fbi->palette; #elif defined(CONFIG_MPC823) cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]); +#elif defined(CONFIG_MCC200) + /* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */ #else # error "Don't know location of color map" #endif @@ -652,9 +655,28 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) } } + /* + * BMP format for Monochrome assumes that the state of a + * pixel is described on a per Bit basis, not per Byte. + * So, in case of Monochrome BMP we should align widths + * on a byte boundary and convert them from Bit to Byte + * units. + * Probably, PXA250 and MPC823 process 1bpp BMP images in + * their own ways, so make the converting to be MCC200 + * specific. + */ +#if defined(CONFIG_MCC200) + if (bpix==1) + { + width = ((width + 7) & ~7) >> 3; + x = ((x + 7) & ~7) >> 3; + pwidth= ((pwidth + 7) & ~7) >> 3; + } +#endif + padded_line = (width&0x3) ? ((width&~0x3)+4) : (width); - if ((x + width)>panel_info.vl_col) - width = panel_info.vl_col - x; + if ((x + width)>pwidth) + width = pwidth - x; if ((y + height)>panel_info.vl_row) height = panel_info.vl_row - y; @@ -666,7 +688,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) for (j = 0; j < width ; j++) #if defined(CONFIG_PXA250) *(fb++)=*(bmap++); -#elif defined(CONFIG_MPC823) +#elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200) *(fb++)=255-*(bmap++); #endif bmap += (width - padded_line); diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c index 6cb523d3c7..430d63f746 100644 --- a/cpu/mpc5xxx/serial.c +++ b/cpu/mpc5xxx/serial.c @@ -165,6 +165,25 @@ void serial_putc(const char c) psc->psc_buffer_8 = c; } +#if defined(CONFIG_SERIAL_MULTI) +void serial_putc_raw_dev(unsigned long dev_base, const char c) +#else +void serial_putc_raw(const char c) +#endif +{ +#if defined(CONFIG_SERIAL_MULTI) + volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base; +#else + volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; +#endif + /* Wait for last character to go. */ + while (!(psc->psc_status & PSC_SR_TXEMP)) + ; + + psc->psc_buffer_8 = c; +} + + #if defined(CONFIG_SERIAL_MULTI) void serial_puts_dev (unsigned long dev_base, const char *s) #else @@ -239,6 +258,43 @@ void serial_setbrg(void) psc->ctlr = div & 0xff; } +#if defined(CONFIG_SERIAL_MULTI) +void serial_setrts_dev (unsigned long dev_base, int s) +#else +void serial_setrts(int s) +#endif +{ +#if defined(CONFIG_SERIAL_MULTI) + volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base; +#else + volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; +#endif + + if (s) { + /* Assert RTS (become LOW) */ + psc->op1 = 0x1; + } + else { + /* Negate RTS (become HIGH) */ + psc->op0 = 0x1; + } +} + +#if defined(CONFIG_SERIAL_MULTI) +int serial_getcts_dev (unsigned long dev_base) +#else +int serial_getcts(void) +#endif +{ +#if defined(CONFIG_SERIAL_MULTI) + volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base; +#else + volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; +#endif + + return (psc->ip & 0x1) ? 0 : 1; +} + #if defined(CONFIG_SERIAL_MULTI) int serial0_init(void) { diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index 61014ecd1f..e95d68bfb8 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -258,12 +258,27 @@ /* #define CONFIG_FEC_10MBIT 1 */ #define CONFIG_PHY_ADDR 1 +/* + * LCD Splash Screen + */ +#define CONFIG_LCD 1 +#if defined(CONFIG_LCD) +#define CONFIG_SPLASH_SCREEN 1 +#define CFG_CONSOLE_IS_IN_ENV 1 +#define LCD_BPP LCD_MONOCHROME +#endif + /* * GPIO configuration */ /* 0x10000004 = 32MB SDRAM */ /* 0x90000004 = 64MB SDRAM */ +#if defined(CONFIG_LCD) +/* set PSC2 in UART mode */ +#define CFG_GPS_PORT_CONFIG 0x00000044 +#else #define CFG_GPS_PORT_CONFIG 0x00000004 +#endif /* * Miscellaneous configurable options diff --git a/include/lcd.h b/include/lcd.h index 7e23736bca..b688583828 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -148,7 +148,14 @@ typedef struct vidinfo { extern vidinfo_t panel_info; -#endif /* CONFIG_MPC823 or CONFIG_PXA250 */ +#elif defined(CONFIG_MCC200) +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 160) */ + ushort vl_row; /* Number of rows (i.e. 100) */ + + u_char vl_bpix; /* Bits per pixel, 0 = 1 */ +} vidinfo_t; +#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 */ /* Video functions */ -- cgit v1.2.3 From 7d0432c9e4958f97957cee36d4803e5c0b194e20 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 31 Aug 2006 16:46:53 +0200 Subject: Coding Style cleanup. Patch by Stefano Babic, 31 Aug 2006 --- CHANGELOG | 3 + common/xyzModem.c | 993 ++++++++++++++++++++++++++++++------------------------ 2 files changed, 551 insertions(+), 445 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 7df923c047..bd46c8c3b4 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Coding Style cleanup. + Patch by Stefano Babic, 31 Aug 2006 + * Add splashscreen support for MCC200 board. * Make the serial driver framework work with CONFIG_SERIAL_MULTI diff --git a/common/xyzModem.c b/common/xyzModem.c index d1d66e8bb3..a209dfa4af 100644 --- a/common/xyzModem.c +++ b/common/xyzModem.c @@ -69,135 +69,157 @@ #define BSP 0x08 #define NAK 0x15 #define CAN 0x18 -#define EOF 0x1A /* ^Z for DOS officionados */ +#define EOF 0x1A /* ^Z for DOS officionados */ #define USE_YMODEM_LENGTH /* Data & state local to the protocol */ -static struct { +static struct +{ #ifdef REDBOOT - hal_virtual_comm_table_t* __chan; + hal_virtual_comm_table_t *__chan; #else - int *__chan; + int *__chan; #endif - unsigned char pkt[1024], *bufp; - unsigned char blk,cblk,crc1,crc2; - unsigned char next_blk; /* Expected block */ - int len, mode, total_retries; - int total_SOH, total_STX, total_CAN; - bool crc_mode, at_eof, tx_ack; + unsigned char pkt[1024], *bufp; + unsigned char blk, cblk, crc1, crc2; + unsigned char next_blk; /* Expected block */ + int len, mode, total_retries; + int total_SOH, total_STX, total_CAN; + bool crc_mode, at_eof, tx_ack; #ifdef USE_YMODEM_LENGTH - unsigned long file_length, read_length; + unsigned long file_length, read_length; #endif } xyz; -#define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */ +#define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */ #define xyzModem_MAX_RETRIES 20 #define xyzModem_MAX_RETRIES_WITH_CRC 10 -#define xyzModem_CAN_COUNT 3 /* Wait for 3 CAN before quitting */ +#define xyzModem_CAN_COUNT 3 /* Wait for 3 CAN before quitting */ -#ifndef REDBOOT /*SB */ +#ifndef REDBOOT /*SB */ typedef int cyg_int32; -int CYGACC_COMM_IF_GETC_TIMEOUT (char chan,char *c) { +int +CYGACC_COMM_IF_GETC_TIMEOUT (char chan, char *c) +{ #define DELAY 20 - unsigned long counter=0; - while (!tstc() && (counter < xyzModem_CHAR_TIMEOUT*1000/DELAY)) { - udelay(DELAY); - counter++; - } - if (tstc()) { - *c=getc(); - return 1; - } - return 0; + unsigned long counter = 0; + while (!tstc () && (counter < xyzModem_CHAR_TIMEOUT * 1000 / DELAY)) + { + udelay (DELAY); + counter++; + } + if (tstc ()) + { + *c = getc (); + return 1; + } + return 0; } -void CYGACC_COMM_IF_PUTC(char x,char y) { - putc(y); +void +CYGACC_COMM_IF_PUTC (char x, char y) +{ + putc (y); } /* Validate a hex character */ __inline__ static bool -_is_hex(char c) +_is_hex (char c) { - return (((c >= '0') && (c <= '9')) || - ((c >= 'A') && (c <= 'F')) || - ((c >= 'a') && (c <= 'f'))); + return (((c >= '0') && (c <= '9')) || + ((c >= 'A') && (c <= 'F')) || ((c >= 'a') && (c <= 'f'))); } /* Convert a single hex nibble */ __inline__ static int -_from_hex(char c) +_from_hex (char c) { - int ret = 0; - - if ((c >= '0') && (c <= '9')) { - ret = (c - '0'); - } else if ((c >= 'a') && (c <= 'f')) { - ret = (c - 'a' + 0x0a); - } else if ((c >= 'A') && (c <= 'F')) { - ret = (c - 'A' + 0x0A); + int ret = 0; + + if ((c >= '0') && (c <= '9')) + { + ret = (c - '0'); + } + else if ((c >= 'a') && (c <= 'f')) + { + ret = (c - 'a' + 0x0a); } - return ret; + else if ((c >= 'A') && (c <= 'F')) + { + ret = (c - 'A' + 0x0A); + } + return ret; } /* Convert a character to lower case */ __inline__ static char -_tolower(char c) +_tolower (char c) { - if ((c >= 'A') && (c <= 'Z')) { - c = (c - 'A') + 'a'; + if ((c >= 'A') && (c <= 'Z')) + { + c = (c - 'A') + 'a'; } - return c; + return c; } /* Parse (scan) a number */ bool -parse_num(char *s, unsigned long *val, char **es, char *delim) +parse_num (char *s, unsigned long *val, char **es, char *delim) { - bool first = true; - int radix = 10; - char c; - unsigned long result = 0; - int digit; - - while (*s == ' ') s++; - while (*s) { - if (first && (s[0] == '0') && (_tolower(s[1]) == 'x')) { - radix = 16; - s += 2; - } - first = false; - c = *s++; - if (_is_hex(c) && ((digit = _from_hex(c)) < radix)) { - /* Valid digit */ + bool first = true; + int radix = 10; + char c; + unsigned long result = 0; + int digit; + + while (*s == ' ') + s++; + while (*s) + { + if (first && (s[0] == '0') && (_tolower (s[1]) == 'x')) + { + radix = 16; + s += 2; + } + first = false; + c = *s++; + if (_is_hex (c) && ((digit = _from_hex (c)) < radix)) + { + /* Valid digit */ #ifdef CYGPKG_HAL_MIPS - /* FIXME: tx49 compiler generates 0x2539018 for MUL which */ - /* isn't any good. */ - if (16 == radix) - result = result << 4; - else - result = 10 * result; - result += digit; + /* FIXME: tx49 compiler generates 0x2539018 for MUL which */ + /* isn't any good. */ + if (16 == radix) + result = result << 4; + else + result = 10 * result; + result += digit; #else - result = (result * radix) + digit; + result = (result * radix) + digit; #endif - } else { - if (delim != (char *)0) { - /* See if this character is one of the delimiters */ - char *dp = delim; - while (*dp && (c != *dp)) dp++; - if (*dp) break; /* Found a good delimiter */ - } - return false; /* Malformatted number */ - } + } + else + { + if (delim != (char *) 0) + { + /* See if this character is one of the delimiters */ + char *dp = delim; + while (*dp && (c != *dp)) + dp++; + if (*dp) + break; /* Found a good delimiter */ + } + return false; /* Malformatted number */ + } } - *val = result; - if (es != (char **)0) { - *es = s; + *val = result; + if (es != (char **) 0) + { + *es = s; } - return true; + return true; } #endif @@ -211,24 +233,26 @@ parse_num(char *s, unsigned long *val, char **es, char *delim) * messages. */ static int -zm_dprintf(char *fmt, ...) +zm_dprintf (char *fmt, ...) { - int cur_console; - va_list args; + int cur_console; + va_list args; - va_start(args, fmt); + va_start (args, fmt); #ifdef REDBOOT - cur_console = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT); - CYGACC_CALL_IF_SET_CONSOLE_COMM(1); + cur_console = + CYGACC_CALL_IF_SET_CONSOLE_COMM + (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT); + CYGACC_CALL_IF_SET_CONSOLE_COMM (1); #endif - diag_vprintf(fmt, args); + diag_vprintf (fmt, args); #ifdef REDBOOT - CYGACC_CALL_IF_SET_CONSOLE_COMM(cur_console); + CYGACC_CALL_IF_SET_CONSOLE_COMM (cur_console); #endif } static void -zm_flush(void) +zm_flush (void) { } @@ -238,42 +262,43 @@ zm_flush(void) */ #define FINAL #ifdef FINAL -static char *zm_out = (char *)0x00380000; -static char *zm_out_start = (char *)0x00380000; +static char *zm_out = (char *) 0x00380000; +static char *zm_out_start = (char *) 0x00380000; #else static char zm_buf[8192]; -static char *zm_out=zm_buf; +static char *zm_out = zm_buf; static char *zm_out_start = zm_buf; #endif static int -zm_dprintf(char *fmt, ...) +zm_dprintf (char *fmt, ...) { - int len; - va_list args; + int len; + va_list args; - va_start(args, fmt); - len = diag_vsprintf(zm_out, fmt, args); - zm_out += len; - return len; + va_start (args, fmt); + len = diag_vsprintf (zm_out, fmt, args); + zm_out += len; + return len; } static void -zm_flush(void) +zm_flush (void) { #ifdef REDBOOT - char *p = zm_out_start; - while (*p) mon_write_char(*p++); + char *p = zm_out_start; + while (*p) + mon_write_char (*p++); #endif - zm_out = zm_out_start; + zm_out = zm_out_start; } #endif static void -zm_dump_buf(void *buf, int len) +zm_dump_buf (void *buf, int len) { #ifdef REDBOOT - diag_vdump_buf_with_offset(zm_dprintf, buf, len, 0); + diag_vdump_buf_with_offset (zm_dprintf, buf, len, 0); #else #endif @@ -283,22 +308,22 @@ static unsigned char zm_buf[2048]; static unsigned char *zm_bp; static void -zm_new(void) +zm_new (void) { - zm_bp = zm_buf; + zm_bp = zm_buf; } static void -zm_save(unsigned char c) +zm_save (unsigned char c) { - *zm_bp++ = c; + *zm_bp++ = c; } static void -zm_dump(int line) +zm_dump (int line) { - zm_dprintf("Packet at line: %d\n", line); - zm_dump_buf(zm_buf, zm_bp-zm_buf); + zm_dprintf ("Packet at line: %d\n", line); + zm_dump_buf (zm_buf, zm_bp - zm_buf); } #define ZM_DEBUG(x) x @@ -308,439 +333,517 @@ zm_dump(int line) /* Wait for the line to go idle */ static void -xyzModem_flush(void) +xyzModem_flush (void) { - int res; - char c; - while (true) { - res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c); - if (!res) return; + int res; + char c; + while (true) + { + res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c); + if (!res) + return; } } static int -xyzModem_get_hdr(void) +xyzModem_get_hdr (void) { - char c; - int res; - bool hdr_found = false; - int i, can_total, hdr_chars; - unsigned short cksum; - - ZM_DEBUG(zm_new()); - /* Find the start of a header */ - can_total = 0; - hdr_chars = 0; - - if (xyz.tx_ack) { - CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); - xyz.tx_ack = false; + char c; + int res; + bool hdr_found = false; + int i, can_total, hdr_chars; + unsigned short cksum; + + ZM_DEBUG (zm_new ()); + /* Find the start of a header */ + can_total = 0; + hdr_chars = 0; + + if (xyz.tx_ack) + { + CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK); + xyz.tx_ack = false; } - while (!hdr_found) { - res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c); - ZM_DEBUG(zm_save(c)); - if (res) { - hdr_chars++; - switch (c) { - case SOH: - xyz.total_SOH++; - case STX: - if (c == STX) xyz.total_STX++; - hdr_found = true; - break; - case CAN: - xyz.total_CAN++; - ZM_DEBUG(zm_dump(__LINE__)); - if (++can_total == xyzModem_CAN_COUNT) { - return xyzModem_cancel; - } else { - /* Wait for multiple CAN to avoid early quits */ - break; - } - case EOT: - /* EOT only supported if no noise */ - if (hdr_chars == 1) { - CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); - ZM_DEBUG(zm_dprintf("ACK on EOT #%d\n", __LINE__)); - ZM_DEBUG(zm_dump(__LINE__)); - return xyzModem_eof; - } - default: - /* Ignore, waiting for start of header */ - ; - } - } else { - /* Data stream timed out */ - xyzModem_flush(); /* Toss any current input */ - ZM_DEBUG(zm_dump(__LINE__)); - CYGACC_CALL_IF_DELAY_US((cyg_int32)250000); - return xyzModem_timeout; - } + while (!hdr_found) + { + res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c); + ZM_DEBUG (zm_save (c)); + if (res) + { + hdr_chars++; + switch (c) + { + case SOH: + xyz.total_SOH++; + case STX: + if (c == STX) + xyz.total_STX++; + hdr_found = true; + break; + case CAN: + xyz.total_CAN++; + ZM_DEBUG (zm_dump (__LINE__)); + if (++can_total == xyzModem_CAN_COUNT) + { + return xyzModem_cancel; + } + else + { + /* Wait for multiple CAN to avoid early quits */ + break; + } + case EOT: + /* EOT only supported if no noise */ + if (hdr_chars == 1) + { + CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK); + ZM_DEBUG (zm_dprintf ("ACK on EOT #%d\n", __LINE__)); + ZM_DEBUG (zm_dump (__LINE__)); + return xyzModem_eof; + } + default: + /* Ignore, waiting for start of header */ + ; + } + } + else + { + /* Data stream timed out */ + xyzModem_flush (); /* Toss any current input */ + ZM_DEBUG (zm_dump (__LINE__)); + CYGACC_CALL_IF_DELAY_US ((cyg_int32) 250000); + return xyzModem_timeout; + } } - /* Header found, now read the data */ - res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.blk); - ZM_DEBUG(zm_save(xyz.blk)); - if (!res) { - ZM_DEBUG(zm_dump(__LINE__)); - return xyzModem_timeout; + /* Header found, now read the data */ + res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.blk); + ZM_DEBUG (zm_save (xyz.blk)); + if (!res) + { + ZM_DEBUG (zm_dump (__LINE__)); + return xyzModem_timeout; } - res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.cblk); - ZM_DEBUG(zm_save(xyz.cblk)); - if (!res) { - ZM_DEBUG(zm_dump(__LINE__)); - return xyzModem_timeout; + res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.cblk); + ZM_DEBUG (zm_save (xyz.cblk)); + if (!res) + { + ZM_DEBUG (zm_dump (__LINE__)); + return xyzModem_timeout; } - xyz.len = (c == SOH) ? 128 : 1024; - xyz.bufp = xyz.pkt; - for (i = 0; i < xyz.len; i++) { - res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c); - ZM_DEBUG(zm_save(c)); - if (res) { - xyz.pkt[i] = c; - } else { - ZM_DEBUG(zm_dump(__LINE__)); - return xyzModem_timeout; - } + xyz.len = (c == SOH) ? 128 : 1024; + xyz.bufp = xyz.pkt; + for (i = 0; i < xyz.len; i++) + { + res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c); + ZM_DEBUG (zm_save (c)); + if (res) + { + xyz.pkt[i] = c; + } + else + { + ZM_DEBUG (zm_dump (__LINE__)); + return xyzModem_timeout; + } } - res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc1); - ZM_DEBUG(zm_save(xyz.crc1)); - if (!res) { - ZM_DEBUG(zm_dump(__LINE__)); - return xyzModem_timeout; + res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.crc1); + ZM_DEBUG (zm_save (xyz.crc1)); + if (!res) + { + ZM_DEBUG (zm_dump (__LINE__)); + return xyzModem_timeout; } - if (xyz.crc_mode) { - res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc2); - ZM_DEBUG(zm_save(xyz.crc2)); - if (!res) { - ZM_DEBUG(zm_dump(__LINE__)); - return xyzModem_timeout; - } + if (xyz.crc_mode) + { + res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.crc2); + ZM_DEBUG (zm_save (xyz.crc2)); + if (!res) + { + ZM_DEBUG (zm_dump (__LINE__)); + return xyzModem_timeout; + } } - ZM_DEBUG(zm_dump(__LINE__)); - /* Validate the message */ - if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) { - ZM_DEBUG(zm_dprintf("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk, (xyz.blk ^ xyz.cblk))); - ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len)); - xyzModem_flush(); - return xyzModem_frame; + ZM_DEBUG (zm_dump (__LINE__)); + /* Validate the message */ + if ((xyz.blk ^ xyz.cblk) != (unsigned char) 0xFF) + { + ZM_DEBUG (zm_dprintf + ("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk, + (xyz.blk ^ xyz.cblk))); + ZM_DEBUG (zm_dump_buf (xyz.pkt, xyz.len)); + xyzModem_flush (); + return xyzModem_frame; } - /* Verify checksum/CRC */ - if (xyz.crc_mode) { - cksum = cyg_crc16(xyz.pkt, xyz.len); - if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) { - ZM_DEBUG(zm_dprintf("CRC error - recvd: %02x%02x, computed: %x\n", - xyz.crc1, xyz.crc2, cksum & 0xFFFF)); - return xyzModem_cksum; - } - } else { - cksum = 0; - for (i = 0; i < xyz.len; i++) { - cksum += xyz.pkt[i]; - } - if (xyz.crc1 != (cksum & 0xFF)) { - ZM_DEBUG(zm_dprintf("Checksum error - recvd: %x, computed: %x\n", xyz.crc1, cksum & 0xFF)); - return xyzModem_cksum; - } + /* Verify checksum/CRC */ + if (xyz.crc_mode) + { + cksum = cyg_crc16 (xyz.pkt, xyz.len); + if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) + { + ZM_DEBUG (zm_dprintf ("CRC error - recvd: %02x%02x, computed: %x\n", + xyz.crc1, xyz.crc2, cksum & 0xFFFF)); + return xyzModem_cksum; + } } - /* If we get here, the message passes [structural] muster */ - return 0; + else + { + cksum = 0; + for (i = 0; i < xyz.len; i++) + { + cksum += xyz.pkt[i]; + } + if (xyz.crc1 != (cksum & 0xFF)) + { + ZM_DEBUG (zm_dprintf + ("Checksum error - recvd: %x, computed: %x\n", xyz.crc1, + cksum & 0xFF)); + return xyzModem_cksum; + } + } + /* If we get here, the message passes [structural] muster */ + return 0; } int -xyzModem_stream_open(connection_info_t *info, int *err) +xyzModem_stream_open (connection_info_t * info, int *err) { #ifdef REDBOOT - int console_chan; + int console_chan; #endif - int stat = 0; - int retries = xyzModem_MAX_RETRIES; - int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC; + int stat = 0; + int retries = xyzModem_MAX_RETRIES; + int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC; /* ZM_DEBUG(zm_out = zm_out_start); */ #ifdef xyzModem_zmodem - if (info->mode == xyzModem_zmodem) { - *err = xyzModem_noZmodem; - return -1; + if (info->mode == xyzModem_zmodem) + { + *err = xyzModem_noZmodem; + return -1; } #endif #ifdef REDBOOT - /* Set up the I/O channel. Note: this allows for using a different port in the future */ - console_chan = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT); - if (info->chan >= 0) { - CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan); - } else { - CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan); + /* Set up the I/O channel. Note: this allows for using a different port in the future */ + console_chan = + CYGACC_CALL_IF_SET_CONSOLE_COMM + (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT); + if (info->chan >= 0) + { + CYGACC_CALL_IF_SET_CONSOLE_COMM (info->chan); } - xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS(); + else + { + CYGACC_CALL_IF_SET_CONSOLE_COMM (console_chan); + } + xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS (); - CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan); - CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT, xyzModem_CHAR_TIMEOUT); + CYGACC_CALL_IF_SET_CONSOLE_COMM (console_chan); + CYGACC_COMM_IF_CONTROL (*xyz.__chan, __COMMCTL_SET_TIMEOUT, + xyzModem_CHAR_TIMEOUT); #else /* TODO: CHECK ! */ - int dummy; - xyz.__chan=&dummy; + int dummy; + xyz.__chan = &dummy; #endif - xyz.len = 0; - xyz.crc_mode = true; - xyz.at_eof = false; - xyz.tx_ack = false; - xyz.mode = info->mode; - xyz.total_retries = 0; - xyz.total_SOH = 0; - xyz.total_STX = 0; - xyz.total_CAN = 0; + xyz.len = 0; + xyz.crc_mode = true; + xyz.at_eof = false; + xyz.tx_ack = false; + xyz.mode = info->mode; + xyz.total_retries = 0; + xyz.total_SOH = 0; + xyz.total_STX = 0; + xyz.total_CAN = 0; #ifdef USE_YMODEM_LENGTH - xyz.read_length = 0; - xyz.file_length = 0; + xyz.read_length = 0; + xyz.file_length = 0; #endif - CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); + CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); - if (xyz.mode == xyzModem_xmodem) { - /* X-modem doesn't have an information header - exit here */ - xyz.next_blk = 1; - return 0; + if (xyz.mode == xyzModem_xmodem) + { + /* X-modem doesn't have an information header - exit here */ + xyz.next_blk = 1; + return 0; } - while (retries-- > 0) { - stat = xyzModem_get_hdr(); - if (stat == 0) { - /* Y-modem file information header */ - if (xyz.blk == 0) { + while (retries-- > 0) + { + stat = xyzModem_get_hdr (); + if (stat == 0) + { + /* Y-modem file information header */ + if (xyz.blk == 0) + { #ifdef USE_YMODEM_LENGTH - /* skip filename */ - while (*xyz.bufp++); - /* get the length */ - parse_num((char *)xyz.bufp, &xyz.file_length, NULL, " "); + /* skip filename */ + while (*xyz.bufp++); + /* get the length */ + parse_num ((char *) xyz.bufp, &xyz.file_length, NULL, " "); #endif - /* The rest of the file name data block quietly discarded */ - xyz.tx_ack = true; - } - xyz.next_blk = 1; - xyz.len = 0; - return 0; - } else - if (stat == xyzModem_timeout) { - if (--crc_retries <= 0) xyz.crc_mode = false; - CYGACC_CALL_IF_DELAY_US(5*100000); /* Extra delay for startup */ - CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); - xyz.total_retries++; - ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__)); - } - if (stat == xyzModem_cancel) { - break; - } + /* The rest of the file name data block quietly discarded */ + xyz.tx_ack = true; + } + xyz.next_blk = 1; + xyz.len = 0; + return 0; + } + else if (stat == xyzModem_timeout) + { + if (--crc_retries <= 0) + xyz.crc_mode = false; + CYGACC_CALL_IF_DELAY_US (5 * 100000); /* Extra delay for startup */ + CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); + xyz.total_retries++; + ZM_DEBUG (zm_dprintf ("NAK (%d)\n", __LINE__)); + } + if (stat == xyzModem_cancel) + { + break; + } } - *err = stat; - ZM_DEBUG(zm_flush()); - return -1; + *err = stat; + ZM_DEBUG (zm_flush ()); + return -1; } int -xyzModem_stream_read(char *buf, int size, int *err) +xyzModem_stream_read (char *buf, int size, int *err) { - int stat, total, len; - int retries; - - total = 0; - stat = xyzModem_cancel; - /* Try and get 'size' bytes into the buffer */ - while (!xyz.at_eof && (size > 0)) { - if (xyz.len == 0) { - retries = xyzModem_MAX_RETRIES; - while (retries-- > 0) { - stat = xyzModem_get_hdr(); - if (stat == 0) { - if (xyz.blk == xyz.next_blk) { - xyz.tx_ack = true; - ZM_DEBUG(zm_dprintf("ACK block %d (%d)\n", xyz.blk, __LINE__)); - xyz.next_blk = (xyz.next_blk + 1) & 0xFF; + int stat, total, len; + int retries; + + total = 0; + stat = xyzModem_cancel; + /* Try and get 'size' bytes into the buffer */ + while (!xyz.at_eof && (size > 0)) + { + if (xyz.len == 0) + { + retries = xyzModem_MAX_RETRIES; + while (retries-- > 0) + { + stat = xyzModem_get_hdr (); + if (stat == 0) + { + if (xyz.blk == xyz.next_blk) + { + xyz.tx_ack = true; + ZM_DEBUG (zm_dprintf + ("ACK block %d (%d)\n", xyz.blk, __LINE__)); + xyz.next_blk = (xyz.next_blk + 1) & 0xFF; #if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH) - if (xyz.mode == xyzModem_xmodem || xyz.file_length == 0) { + if (xyz.mode == xyzModem_xmodem || xyz.file_length == 0) + { #else - if (1) { + if (1) + { #endif - /* Data blocks can be padded with ^Z (EOF) characters */ - /* This code tries to detect and remove them */ - if ((xyz.bufp[xyz.len-1] == EOF) && - (xyz.bufp[xyz.len-2] == EOF) && - (xyz.bufp[xyz.len-3] == EOF)) { - while (xyz.len && (xyz.bufp[xyz.len-1] == EOF)) { - xyz.len--; - } - } - } + /* Data blocks can be padded with ^Z (EOF) characters */ + /* This code tries to detect and remove them */ + if ((xyz.bufp[xyz.len - 1] == EOF) && + (xyz.bufp[xyz.len - 2] == EOF) && + (xyz.bufp[xyz.len - 3] == EOF)) + { + while (xyz.len + && (xyz.bufp[xyz.len - 1] == EOF)) + { + xyz.len--; + } + } + } #ifdef USE_YMODEM_LENGTH - /* - * See if accumulated length exceeds that of the file. - * If so, reduce size (i.e., cut out pad bytes) - * Only do this for Y-modem (and Z-modem should it ever - * be supported since it can fall back to Y-modem mode). - */ - if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length) { - xyz.read_length += xyz.len; - if (xyz.read_length > xyz.file_length) { - xyz.len -= (xyz.read_length - xyz.file_length); - } - } + /* + * See if accumulated length exceeds that of the file. + * If so, reduce size (i.e., cut out pad bytes) + * Only do this for Y-modem (and Z-modem should it ever + * be supported since it can fall back to Y-modem mode). + */ + if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length) + { + xyz.read_length += xyz.len; + if (xyz.read_length > xyz.file_length) + { + xyz.len -= (xyz.read_length - xyz.file_length); + } + } #endif - break; - } else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF)) { - /* Just re-ACK this so sender will get on with it */ - CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); - continue; /* Need new header */ - } else { - stat = xyzModem_sequence; - } - } - if (stat == xyzModem_cancel) { - break; - } - if (stat == xyzModem_eof) { - CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); - ZM_DEBUG(zm_dprintf("ACK (%d)\n", __LINE__)); - if (xyz.mode == xyzModem_ymodem) { - CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); - xyz.total_retries++; - ZM_DEBUG(zm_dprintf("Reading Final Header\n")); - stat = xyzModem_get_hdr(); - CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); - ZM_DEBUG(zm_dprintf("FINAL ACK (%d)\n", __LINE__)); - } - xyz.at_eof = true; - break; - } - CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); - xyz.total_retries++; - ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__)); - } - if (stat < 0) { - *err = stat; - xyz.len = -1; - return total; - } - } - /* Don't "read" data from the EOF protocol package */ - if (!xyz.at_eof) { - len = xyz.len; - if (size < len) len = size; - memcpy(buf, xyz.bufp, len); - size -= len; - buf += len; - total += len; - xyz.len -= len; - xyz.bufp += len; - } + break; + } + else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF)) + { + /* Just re-ACK this so sender will get on with it */ + CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK); + continue; /* Need new header */ + } + else + { + stat = xyzModem_sequence; + } + } + if (stat == xyzModem_cancel) + { + break; + } + if (stat == xyzModem_eof) + { + CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK); + ZM_DEBUG (zm_dprintf ("ACK (%d)\n", __LINE__)); + if (xyz.mode == xyzModem_ymodem) + { + CYGACC_COMM_IF_PUTC (*xyz.__chan, + (xyz.crc_mode ? 'C' : NAK)); + xyz.total_retries++; + ZM_DEBUG (zm_dprintf ("Reading Final Header\n")); + stat = xyzModem_get_hdr (); + CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK); + ZM_DEBUG (zm_dprintf ("FINAL ACK (%d)\n", __LINE__)); + } + xyz.at_eof = true; + break; + } + CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); + xyz.total_retries++; + ZM_DEBUG (zm_dprintf ("NAK (%d)\n", __LINE__)); + } + if (stat < 0) + { + *err = stat; + xyz.len = -1; + return total; + } + } + /* Don't "read" data from the EOF protocol package */ + if (!xyz.at_eof) + { + len = xyz.len; + if (size < len) + len = size; + memcpy (buf, xyz.bufp, len); + size -= len; + buf += len; + total += len; + xyz.len -= len; + xyz.bufp += len; + } } - return total; + return total; } void -xyzModem_stream_close(int *err) +xyzModem_stream_close (int *err) { - diag_printf("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n", - xyz.crc_mode ? "CRC" : "Cksum", - xyz.total_SOH, xyz.total_STX, xyz.total_CAN, - xyz.total_retries); - ZM_DEBUG(zm_flush()); + diag_printf + ("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n", + xyz.crc_mode ? "CRC" : "Cksum", xyz.total_SOH, xyz.total_STX, + xyz.total_CAN, xyz.total_retries); + ZM_DEBUG (zm_flush ()); } /* Need to be able to clean out the input buffer, so have to take the */ /* getc */ -void xyzModem_stream_terminate(bool abort, int (*getc)(void)) +void +xyzModem_stream_terminate (bool abort, int (*getc) (void)) { int c; - if (abort) { - ZM_DEBUG(zm_dprintf("!!!! TRANSFER ABORT !!!!\n")); - switch (xyz.mode) { + if (abort) + { + ZM_DEBUG (zm_dprintf ("!!!! TRANSFER ABORT !!!!\n")); + switch (xyz.mode) + { case xyzModem_xmodem: case xyzModem_ymodem: /* The X/YMODEM Spec seems to suggest that multiple CAN followed by an equal */ /* number of Backspaces is a friendly way to get the other end to abort. */ - CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN); - CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN); - CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN); - CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN); - CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP); - CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP); - CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP); - CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP); + CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN); + CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN); + CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN); + CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN); + CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP); + CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP); + CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP); + CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP); /* Now consume the rest of what's waiting on the line. */ - ZM_DEBUG(zm_dprintf("Flushing serial line.\n")); - xyzModem_flush(); - xyz.at_eof = true; - break; + ZM_DEBUG (zm_dprintf ("Flushing serial line.\n")); + xyzModem_flush (); + xyz.at_eof = true; + break; #ifdef xyzModem_zmodem case xyzModem_zmodem: /* Might support it some day I suppose. */ #endif - break; - } - } else { - ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n")); + break; + } + } + else + { + ZM_DEBUG (zm_dprintf ("Engaging cleanup mode...\n")); /* * Consume any trailing crap left in the inbuffer from * previous recieved blocks. Since very few files are an exact multiple * of the transfer block size, there will almost always be some gunk here. * If we don't eat it now, RedBoot will think the user typed it. */ - ZM_DEBUG(zm_dprintf("Trailing gunk:\n")); - while ((c = (*getc)()) > -1) ; - ZM_DEBUG(zm_dprintf("\n")); + ZM_DEBUG (zm_dprintf ("Trailing gunk:\n")); + while ((c = (*getc) ()) > -1); + ZM_DEBUG (zm_dprintf ("\n")); /* * Make a small delay to give terminal programs like minicom * time to get control again after their file transfer program * exits. */ - CYGACC_CALL_IF_DELAY_US((cyg_int32)250000); - } + CYGACC_CALL_IF_DELAY_US ((cyg_int32) 250000); + } } char * -xyzModem_error(int err) +xyzModem_error (int err) { - switch (err) { + switch (err) + { case xyzModem_access: - return "Can't access file"; - break; + return "Can't access file"; + break; case xyzModem_noZmodem: - return "Sorry, zModem not available yet"; - break; + return "Sorry, zModem not available yet"; + break; case xyzModem_timeout: - return "Timed out"; - break; + return "Timed out"; + break; case xyzModem_eof: - return "End of file"; - break; + return "End of file"; + break; case xyzModem_cancel: - return "Cancelled"; - break; + return "Cancelled"; + break; case xyzModem_frame: - return "Invalid framing"; - break; + return "Invalid framing"; + break; case xyzModem_cksum: - return "CRC/checksum error"; - break; + return "CRC/checksum error"; + break; case xyzModem_sequence: - return "Block sequence error"; - break; + return "Block sequence error"; + break; default: - return "Unknown error"; - break; + return "Unknown error"; + break; } } /* * RedBoot interface */ -#if 0 /* SB */ -GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close, - xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error); -RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem); -RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem); +#if 0 /* SB */ +GETC_IO_FUNCS (xyzModem_io, xyzModem_stream_open, xyzModem_stream_close, + xyzModem_stream_terminate, xyzModem_stream_read, + xyzModem_error); +RedBoot_load (xmodem, xyzModem_io, false, false, xyzModem_xmodem); +RedBoot_load (ymodem, xyzModem_io, false, false, xyzModem_ymodem); #endif -- cgit v1.2.3 From 43835aac4803d459dd73fabce09b27a826a381d7 Mon Sep 17 00:00:00 2001 From: Detlev Zundel Date: Fri, 1 Sep 2006 11:59:23 +0200 Subject: Added interrupt handling capabilities for mpc5xxx processors. Also added Linux like BUG() macros. --- cpu/mpc5xxx/interrupts.c | 292 ++++++++++++++++++++++++++++++++++++++++++++--- include/common.h | 6 + include/mpc5xxx.h | 59 ++++++++++ 3 files changed, 342 insertions(+), 15 deletions(-) diff --git a/cpu/mpc5xxx/interrupts.c b/cpu/mpc5xxx/interrupts.c index 7bacecd595..7b5cb8be4e 100644 --- a/cpu/mpc5xxx/interrupts.c +++ b/cpu/mpc5xxx/interrupts.c @@ -1,4 +1,7 @@ /* + * (C) Copyright 2006 + * Detlev Zundel, DENX Software Engineering, dzu@denx.de + * * (C) Copyright -2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * @@ -24,18 +27,212 @@ * MA 02111-1307 USA */ -/* - * interrupts.c - just enough support for the decrementer/timer +/* this section was ripped out of arch/ppc/syslib/mpc52xx_pic.c in the + * Linux 2.6 source with the following copyright. + * + * Based on (well, mostly copied from) the code from the 2.4 kernel by + * Dale Farnsworth and Kent Borg. + * + * Copyright (C) 2004 Sylvain Munaut + * Copyright (C) 2003 Montavista Software, Inc */ #include #include +#include #include -int interrupt_init_cpu (ulong *decrementer_count) +struct irq_action { + interrupt_handler_t *handler; + void *arg; + ulong count; +}; + +static struct irq_action irq_handlers[NR_IRQS]; + +static struct mpc5xxx_intr *intr; +static struct mpc5xxx_sdma *sdma; + +static void mpc5xxx_ic_disable(unsigned int irq) +{ + u32 val; + + if (irq == MPC5XXX_IRQ0) { + val = in_be32(&intr->ctrl); + val &= ~(1 << 11); + out_be32(&intr->ctrl, val); + } else if (irq < MPC5XXX_IRQ1) { + BUG(); + } else if (irq <= MPC5XXX_IRQ3) { + val = in_be32(&intr->ctrl); + val &= ~(1 << (10 - (irq - MPC5XXX_IRQ1))); + out_be32(&intr->ctrl, val); + } else if (irq < MPC5XXX_SDMA_IRQ_BASE) { + val = in_be32(&intr->main_mask); + val |= 1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE)); + out_be32(&intr->main_mask, val); + } else if (irq < MPC5XXX_PERP_IRQ_BASE) { + val = in_be32(&sdma->IntMask); + val |= 1 << (irq - MPC5XXX_SDMA_IRQ_BASE); + out_be32(&sdma->IntMask, val); + } else { + val = in_be32(&intr->per_mask); + val |= 1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE)); + out_be32(&intr->per_mask, val); + } +} + +static void mpc5xxx_ic_enable(unsigned int irq) +{ + u32 val; + + if (irq == MPC5XXX_IRQ0) { + val = in_be32(&intr->ctrl); + val |= 1 << 11; + out_be32(&intr->ctrl, val); + } else if (irq < MPC5XXX_IRQ1) { + BUG(); + } else if (irq <= MPC5XXX_IRQ3) { + val = in_be32(&intr->ctrl); + val |= 1 << (10 - (irq - MPC5XXX_IRQ1)); + out_be32(&intr->ctrl, val); + } else if (irq < MPC5XXX_SDMA_IRQ_BASE) { + val = in_be32(&intr->main_mask); + val &= ~(1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE))); + out_be32(&intr->main_mask, val); + } else if (irq < MPC5XXX_PERP_IRQ_BASE) { + val = in_be32(&sdma->IntMask); + val &= ~(1 << (irq - MPC5XXX_SDMA_IRQ_BASE)); + out_be32(&sdma->IntMask, val); + } else { + val = in_be32(&intr->per_mask); + val &= ~(1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE))); + out_be32(&intr->per_mask, val); + } +} + +static void mpc5xxx_ic_ack(unsigned int irq) +{ + u32 val; + + /* + * Only some irqs are reset here, others in interrupting hardware. + */ + + switch (irq) { + case MPC5XXX_IRQ0: + val = in_be32(&intr->ctrl); + val |= 0x08000000; + out_be32(&intr->ctrl, val); + break; + case MPC5XXX_CCS_IRQ: + val = in_be32(&intr->enc_status); + val |= 0x00000400; + out_be32(&intr->enc_status, val); + break; + case MPC5XXX_IRQ1: + val = in_be32(&intr->ctrl); + val |= 0x04000000; + out_be32(&intr->ctrl, val); + break; + case MPC5XXX_IRQ2: + val = in_be32(&intr->ctrl); + val |= 0x02000000; + out_be32(&intr->ctrl, val); + break; + case MPC5XXX_IRQ3: + val = in_be32(&intr->ctrl); + val |= 0x01000000; + out_be32(&intr->ctrl, val); + break; + default: + if (irq >= MPC5XXX_SDMA_IRQ_BASE + && irq < (MPC5XXX_SDMA_IRQ_BASE + MPC5XXX_SDMA_IRQ_NUM)) { + out_be32(&sdma->IntPend, + 1 << (irq - MPC5XXX_SDMA_IRQ_BASE)); + } + break; + } +} + +static void mpc5xxx_ic_disable_and_ack(unsigned int irq) +{ + mpc5xxx_ic_disable(irq); + mpc5xxx_ic_ack(irq); +} + +static void mpc5xxx_ic_end(unsigned int irq) +{ + mpc5xxx_ic_enable(irq); +} + +void mpc5xxx_init_irq(void) +{ + u32 intr_ctrl; + + /* Remap the necessary zones */ + intr = (struct mpc5xxx_intr *)(MPC5XXX_ICTL); + sdma = (struct mpc5xxx_sdma *)(MPC5XXX_SDMA); + + /* Disable all interrupt sources. */ + out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */ + out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */ + out_be32(&intr->per_mask, 0x7ffffc00); /* 1 means disabled */ + out_be32(&intr->main_mask, 0x00010fff); /* 1 means disabled */ + intr_ctrl = in_be32(&intr->ctrl); + intr_ctrl |= 0x0f000000 | /* clear IRQ 0-3 */ + 0x00ff0000 | /* IRQ 0-3 level sensitive low active */ + 0x00001000 | /* MEE master external enable */ + 0x00000000 | /* 0 means disable IRQ 0-3 */ + 0x00000001; /* CEb route critical normally */ + out_be32(&intr->ctrl, intr_ctrl); + + /* Zero a bunch of the priority settings. */ + out_be32(&intr->per_pri1, 0); + out_be32(&intr->per_pri2, 0); + out_be32(&intr->per_pri3, 0); + out_be32(&intr->main_pri1, 0); + out_be32(&intr->main_pri2, 0); +} + +int mpc5xxx_get_irq(struct pt_regs *regs) +{ + u32 status; + int irq = -1; + + status = in_be32(&intr->enc_status); + + if (status & 0x00000400) { /* critical */ + irq = (status >> 8) & 0x3; + if (irq == 2) /* high priority peripheral */ + goto peripheral; + irq += MPC5XXX_CRIT_IRQ_BASE; + } else if (status & 0x00200000) { /* main */ + irq = (status >> 16) & 0x1f; + if (irq == 4) /* low priority peripheral */ + goto peripheral; + irq += MPC5XXX_MAIN_IRQ_BASE; + } else if (status & 0x20000000) { /* peripheral */ + peripheral: + irq = (status >> 24) & 0x1f; + if (irq == 0) { /* bestcomm */ + status = in_be32(&sdma->IntPend); + irq = ffs(status) + MPC5XXX_SDMA_IRQ_BASE - 1; + } else + irq += MPC5XXX_PERP_IRQ_BASE; + } + + return irq; +} + +/****************************************************************************/ + +int interrupt_init_cpu(ulong * decrementer_count) { *decrementer_count = get_tbclk() / CFG_HZ; + mpc5xxx_init_irq(); + return (0); } @@ -44,14 +241,32 @@ int interrupt_init_cpu (ulong *decrementer_count) /* * Handle external interrupts */ -void -external_interrupt(struct pt_regs *regs) +void external_interrupt(struct pt_regs *regs) { - puts("external_interrupt (oops!)\n"); + int irq, unmask = 1; + + irq = mpc5xxx_get_irq(regs); + + mpc5xxx_ic_disable_and_ack(irq); + + enable_interrupts(); + + if (irq_handlers[irq].handler != NULL) + (*irq_handlers[irq].handler) (irq_handlers[irq].arg); + else { + printf("\nBogus External Interrupt IRQ %d\n", irq); + /* + * turn off the bogus interrupt, otherwise it + * might repeat forever + */ + unmask = 0; + } + + if (unmask) + mpc5xxx_ic_end(irq); } -void -timer_interrupt_cpu (struct pt_regs *regs) +void timer_interrupt_cpu(struct pt_regs *regs) { /* nothing to do here */ return; @@ -63,22 +278,69 @@ timer_interrupt_cpu (struct pt_regs *regs) * Install and free a interrupt handler. */ -void -irq_install_handler(int vec, interrupt_handler_t *handler, void *arg) +void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg) { + if (irq < 0 || irq >= NR_IRQS) { + printf("irq_install_handler: bad irq number %d\n", irq); + return; + } + if (irq_handlers[irq].handler != NULL) + printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n", + (ulong) handler, (ulong) irq_handlers[irq].handler); + + irq_handlers[irq].handler = handler; + irq_handlers[irq].arg = arg; + + mpc5xxx_ic_enable(irq); } -void -irq_free_handler(int vec) +void irq_free_handler(int irq) { + if (irq < 0 || irq >= NR_IRQS) { + printf("irq_free_handler: bad irq number %d\n", irq); + return; + } + + mpc5xxx_ic_disable(irq); + irq_handlers[irq].handler = NULL; + irq_handlers[irq].arg = NULL; } /****************************************************************************/ -void -do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) +#if (CONFIG_COMMANDS & CFG_CMD_IRQ) +void do_irqinfo(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) { - puts("IRQ related functions are unimplemented currently.\n"); + int irq, re_enable; + u32 intr_ctrl; + char *irq_config[] = { "level sensitive, active high", + "edge sensitive, rising active edge", + "edge sensitive, falling active edge", + "level sensitive, active low" + }; + + re_enable = disable_interrupts(); + + intr_ctrl = in_be32(&intr->ctrl); + printf("Interrupt configuration:\n"); + + for (irq = 0; irq <= 3; irq++) { + printf("IRQ%d: %s\n", irq, + irq_config[(intr_ctrl >> (22 - 2 * irq)) & 0x3]); + } + + puts("\nInterrupt-Information:\n" "Nr Routine Arg Count\n"); + + for (irq = 0; irq < NR_IRQS; irq++) + if (irq_handlers[irq].handler != NULL) + printf("%02d %08lx %08lx %ld\n", irq, + (ulong) irq_handlers[irq].handler, + (ulong) irq_handlers[irq].arg, + irq_handlers[irq].count); + + if (re_enable) + enable_interrupts(); } +#endif diff --git a/include/common.h b/include/common.h index 9a19001c18..bee2fb7022 100644 --- a/include/common.h +++ b/include/common.h @@ -109,6 +109,12 @@ typedef volatile unsigned char vu_char; #define debugX(level,fmt,args...) #endif /* DEBUG */ +#define BUG() do { \ + printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \ + panic("BUG!"); \ +} while (0) +#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0) + typedef void (interrupt_handler_t)(void *); #include /* boot information for Linux kernel */ diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h index daa4d5f6d4..1d20d1dcf5 100644 --- a/include/mpc5xxx.h +++ b/include/mpc5xxx.h @@ -232,6 +232,65 @@ #define MPC5XXX_ICTL_PER_STS (MPC5XXX_ICTL + 0x0030) #define MPC5XXX_ICTL_BUS_STS (MPC5XXX_ICTL + 0x0038) +#define NR_IRQS 64 + +/* IRQ mapping - these are our logical IRQ numbers */ +#define MPC5XXX_CRIT_IRQ_NUM 4 +#define MPC5XXX_MAIN_IRQ_NUM 17 +#define MPC5XXX_SDMA_IRQ_NUM 17 +#define MPC5XXX_PERP_IRQ_NUM 23 + +#define MPC5XXX_CRIT_IRQ_BASE 1 +#define MPC5XXX_MAIN_IRQ_BASE (MPC5XXX_CRIT_IRQ_BASE + MPC5XXX_CRIT_IRQ_NUM) +#define MPC5XXX_SDMA_IRQ_BASE (MPC5XXX_MAIN_IRQ_BASE + MPC5XXX_MAIN_IRQ_NUM) +#define MPC5XXX_PERP_IRQ_BASE (MPC5XXX_SDMA_IRQ_BASE + MPC5XXX_SDMA_IRQ_NUM) + +#define MPC5XXX_IRQ0 (MPC5XXX_CRIT_IRQ_BASE + 0) +#define MPC5XXX_SLICE_TIMER_0_IRQ (MPC5XXX_CRIT_IRQ_BASE + 1) +#define MPC5XXX_HI_INT_IRQ (MPC5XXX_CRIT_IRQ_BASE + 2) +#define MPC5XXX_CCS_IRQ (MPC5XXX_CRIT_IRQ_BASE + 3) + +#define MPC5XXX_IRQ1 (MPC5XXX_MAIN_IRQ_BASE + 1) +#define MPC5XXX_IRQ2 (MPC5XXX_MAIN_IRQ_BASE + 2) +#define MPC5XXX_IRQ3 (MPC5XXX_MAIN_IRQ_BASE + 3) +#define MPC5XXX_RTC_PINT_IRQ (MPC5XXX_MAIN_IRQ_BASE + 5) +#define MPC5XXX_RTC_SINT_IRQ (MPC5XXX_MAIN_IRQ_BASE + 6) +#define MPC5XXX_RTC_GPIO_STD_IRQ (MPC5XXX_MAIN_IRQ_BASE + 7) +#define MPC5XXX_RTC_GPIO_WKUP_IRQ (MPC5XXX_MAIN_IRQ_BASE + 8) +#define MPC5XXX_TMR0_IRQ (MPC5XXX_MAIN_IRQ_BASE + 9) +#define MPC5XXX_TMR1_IRQ (MPC5XXX_MAIN_IRQ_BASE + 10) +#define MPC5XXX_TMR2_IRQ (MPC5XXX_MAIN_IRQ_BASE + 11) +#define MPC5XXX_TMR3_IRQ (MPC5XXX_MAIN_IRQ_BASE + 12) +#define MPC5XXX_TMR4_IRQ (MPC5XXX_MAIN_IRQ_BASE + 13) +#define MPC5XXX_TMR5_IRQ (MPC5XXX_MAIN_IRQ_BASE + 14) +#define MPC5XXX_TMR6_IRQ (MPC5XXX_MAIN_IRQ_BASE + 15) +#define MPC5XXX_TMR7_IRQ (MPC5XXX_MAIN_IRQ_BASE + 16) + +#define MPC5XXX_SDMA_IRQ (MPC5XXX_PERP_IRQ_BASE + 0) +#define MPC5XXX_PSC1_IRQ (MPC5XXX_PERP_IRQ_BASE + 1) +#define MPC5XXX_PSC2_IRQ (MPC5XXX_PERP_IRQ_BASE + 2) +#define MPC5XXX_PSC3_IRQ (MPC5XXX_PERP_IRQ_BASE + 3) +#define MPC5XXX_PSC6_IRQ (MPC5XXX_PERP_IRQ_BASE + 4) +#define MPC5XXX_IRDA_IRQ (MPC5XXX_PERP_IRQ_BASE + 4) +#define MPC5XXX_FEC_IRQ (MPC5XXX_PERP_IRQ_BASE + 5) +#define MPC5XXX_USB_IRQ (MPC5XXX_PERP_IRQ_BASE + 6) +#define MPC5XXX_ATA_IRQ (MPC5XXX_PERP_IRQ_BASE + 7) +#define MPC5XXX_PCI_CNTRL_IRQ (MPC5XXX_PERP_IRQ_BASE + 8) +#define MPC5XXX_PCI_SCIRX_IRQ (MPC5XXX_PERP_IRQ_BASE + 9) +#define MPC5XXX_PCI_SCITX_IRQ (MPC5XXX_PERP_IRQ_BASE + 10) +#define MPC5XXX_PSC4_IRQ (MPC5XXX_PERP_IRQ_BASE + 11) +#define MPC5XXX_PSC5_IRQ (MPC5XXX_PERP_IRQ_BASE + 12) +#define MPC5XXX_SPI_MODF_IRQ (MPC5XXX_PERP_IRQ_BASE + 13) +#define MPC5XXX_SPI_SPIF_IRQ (MPC5XXX_PERP_IRQ_BASE + 14) +#define MPC5XXX_I2C1_IRQ (MPC5XXX_PERP_IRQ_BASE + 15) +#define MPC5XXX_I2C2_IRQ (MPC5XXX_PERP_IRQ_BASE + 16) +#define MPC5XXX_MSCAN1_IRQ (MPC5XXX_PERP_IRQ_BASE + 17) +#define MPC5XXX_MSCAN2_IRQ (MPC5XXX_PERP_IRQ_BASE + 18) +#define MPC5XXX_IR_RX_IRQ (MPC5XXX_PERP_IRQ_BASE + 19) +#define MPC5XXX_IR_TX_IRQ (MPC5XXX_PERP_IRQ_BASE + 20) +#define MPC5XXX_XLB_ARB_IRQ (MPC5XXX_PERP_IRQ_BASE + 21) +#define MPC5XXX_BDLC_IRQ (MPC5XXX_PERP_IRQ_BASE + 22) + /* General Purpose Timers registers */ #define MPC5XXX_GPT0_ENABLE (MPC5XXX_GPT + 0x0) #define MPC5XXX_GPT0_COUNTER (MPC5XXX_GPT + 0x4) -- cgit v1.2.3 From d7c2a02dea550e8701d1151010a823df48ad5c98 Mon Sep 17 00:00:00 2001 From: Detlev Zundel Date: Fri, 1 Sep 2006 15:00:02 +0200 Subject: Added simple_strtoul(), getenv() and setenv() to the exported functions. Also bumped up ABI version to reflect this change. --- common/exports.c | 7 +++++-- include/_exports.h | 3 +++ include/exports.h | 5 ++++- 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/common/exports.c b/common/exports.c index ef25338169..0cb4396ea4 100644 --- a/common/exports.c +++ b/common/exports.c @@ -23,8 +23,11 @@ void jumptable_init (void) gd->jt[XF_get_version] = (void *) get_version; gd->jt[XF_malloc] = (void *) malloc; gd->jt[XF_free] = (void *) free; - gd->jt[XF_get_timer] = (void *)get_timer; - gd->jt[XF_udelay] = (void *)udelay; + gd->jt[XF_getenv] = (void *) getenv; + gd->jt[XF_setenv] = (void *) setenv; + gd->jt[XF_get_timer] = (void *) get_timer; + gd->jt[XF_simple_strtoul] = (void *) simple_strtoul; + gd->jt[XF_udelay] = (void *) udelay; #if defined(CONFIG_I386) || defined(CONFIG_PPC) gd->jt[XF_install_hdlr] = (void *) irq_install_handler; gd->jt[XF_free_hdlr] = (void *) irq_free_handler; diff --git a/include/_exports.h b/include/_exports.h index 61dcaaf331..2b8ec3d3f9 100644 --- a/include/_exports.h +++ b/include/_exports.h @@ -12,6 +12,9 @@ EXPORT_FUNC(udelay) EXPORT_FUNC(get_timer) EXPORT_FUNC(vprintf) EXPORT_FUNC(do_reset) +EXPORT_FUNC(getenv) +EXPORT_FUNC(setenv) +EXPORT_FUNC(simple_strtoul) #if (CONFIG_COMMANDS & CFG_CMD_I2C) EXPORT_FUNC(i2c_write) EXPORT_FUNC(i2c_read) diff --git a/include/exports.h b/include/exports.h index 0eaf66e183..8f7f61703c 100644 --- a/include/exports.h +++ b/include/exports.h @@ -20,6 +20,9 @@ void udelay(unsigned long); unsigned long get_timer(unsigned long); void vprintf(const char *, va_list); void do_reset (void); +unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base); +char *getenv (char *name); +void setenv (char *varname, char *varvalue); #if (CONFIG_COMMANDS & CFG_CMD_I2C) int i2c_write (uchar, uint, int , uchar* , int); int i2c_read (uchar, uint, int , uchar* , int); @@ -37,7 +40,7 @@ enum { XF_MAX }; -#define XF_VERSION 2 +#define XF_VERSION 3 #if defined(CONFIG_I386) extern gd_t *global_data; -- cgit v1.2.3 From ec0f7277cbb76565a203b5909acb2a6b93ba35fa Mon Sep 17 00:00:00 2001 From: Detlev Zundel Date: Fri, 1 Sep 2006 15:02:06 +0200 Subject: Added another example showing simple interrupt interception. --- examples/Makefile | 6 ++++ examples/interrupt.c | 81 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 87 insertions(+) create mode 100644 examples/interrupt.c diff --git a/examples/Makefile b/examples/Makefile index a342d75062..cdf269088a 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -94,6 +94,12 @@ SREC += mem_to_mem_idma2intr.srec BIN += mem_to_mem_idma2intr.bin mem_to_mem_idma2intr endif +# Demo for 52xx IRQs +ifeq ($(CPU),mpc5xxx) +SREC += interrupt.srec +BIN += interrupt.bin interrupt +endif + # Utility for resetting i82559 EEPROM ifeq ($(BOARD),oxc) SREC += eepro100_eeprom.srec diff --git a/examples/interrupt.c b/examples/interrupt.c new file mode 100644 index 0000000000..f3061d1ec0 --- /dev/null +++ b/examples/interrupt.c @@ -0,0 +1,81 @@ +/* + * (C) Copyright 2006 + * Detlev Zundel, DENX Software Engineering, dzu@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This is a very simple standalone application demonstrating + * catching IRQs on the MPC52xx architecture. + * + * The interrupt to be intercepted can be specified as an argument + * to the application. Specifying nothing will intercept IRQ1 on the + * MPC5200 platform. On the CR825 carrier board from MicroSys this + * maps to the ABORT switch :) + * + * Note that the specified vector is only a logical number specified + * by the respective header file. + */ + +#include +#include +#include + +#if defined(CONFIG_MPC5xxx) +#define DFL_IRQ MPC5XXX_IRQ1 +#else +#define DFL_IRQ 0 +#endif + +static void irq_handler (void *arg); + +int interrupt (int argc, char *argv[]) +{ + int c, irq = -1; + + app_startup (argv); + + if (argc > 1) + irq = simple_strtoul (argv[1], NULL, 0); + if ((irq < 0) || (irq > NR_IRQS)) + irq = DFL_IRQ; + + printf ("Installing handler for irq vector %d and doing busy wait\n", + irq); + printf ("Press 'q' to quit\n"); + + /* Install interrupt handler */ + install_hdlr (irq, irq_handler, NULL); + while ((c = getc ()) != 'q') { + printf ("Ok, ok, I am still alive!\n"); + } + + free_hdlr (irq); + printf ("\nInterrupt handler has been uninstalled\n"); + + return (0); +} + +/* + * Handler for interrupt + */ +static void irq_handler (void *arg) +{ + /* just for demonstration */ + printf ("+"); +} -- cgit v1.2.3 From 2c051651734cfc1e97da0f81d05c45f4f8dbca6a Mon Sep 17 00:00:00 2001 From: Detlev Zundel Date: Fri, 1 Sep 2006 15:39:02 +0200 Subject: Added changelog entry for previous small commits and extended README on coding style. --- CHANGELOG | 10 ++++++++++ README | 19 +++++++++++++------ 2 files changed, 23 insertions(+), 6 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 7df923c047..197af8d502 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,16 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Extended README entry on coding style + +* Added another example showing simple interrupt interception. + +* Added simple_strtoul(), getenv() and setenv() to the exported functions. + Also bumped up ABI version to reflect this change. + +* Added interrupt handling capabilities for mpc5xxx processors. + Also added Linux like BUG() macros. + * Add splashscreen support for MCC200 board. * Make the serial driver framework work with CONFIG_SERIAL_MULTI diff --git a/README b/README index e772c1af00..e0240238b8 100644 --- a/README +++ b/README @@ -3469,12 +3469,19 @@ Coding Standards: ----------------- All contributions to U-Boot should conform to the Linux kernel -coding style; see the file "Documentation/CodingStyle" in your Linux -kernel source directory. - -Please note that U-Boot is implemented in C (and to some small parts -in Assembler); no C++ is used, so please do not use C++ style -comments (//) in your code. +coding style; see the file "Documentation/CodingStyle" and the script +"scripts/Lindent" in your Linux kernel source directory. In sources +originating from U-Boot a style corresponding to "Lindent -pcs" (adding +spaces before parameters to function calls) is actually used. + +Source files originating from a different project (for example the +MTD subsystem) are generally exempt from these guidelines and are not +reformated to ease subsequent migration to newer versions of those +sources. + +Please note that U-Boot is implemented in C (and to some small parts in +Assembler); no C++ is used, so please do not use C++ style comments (//) +in your code. Please also stick to the following formatting rules: - remove any trailing white space -- cgit v1.2.3 From bfdfd7c26c39661a8ff542d22ed01bc02e303aea Mon Sep 17 00:00:00 2001 From: Detlev Zundel Date: Fri, 1 Sep 2006 17:33:44 +0200 Subject: Added David Updegraff as maintainer of CRAYL1 --- MAINTAINERS | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index e1baa422ae..0c4cfb43cf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -318,6 +318,11 @@ Rune Torgersen MPC8266ADS MPC8266 + +David Updegraff + + CRAYL1 PPC4xx + Josef Wagner CPC45 MPC8245 @@ -347,7 +352,6 @@ Unknown / orphaned boards: RPXClassic MPC8xx RPXlite MPC8xx - CRAYL1 PPC4xx ERIC PPC4xx MOUSSE MPC824x -- cgit v1.2.3 From 4c15ef55a2fe13ecb780e7ea2064e608a0ee0d67 Mon Sep 17 00:00:00 2001 From: Marian Balakowicz Date: Fri, 1 Sep 2006 19:44:05 +0200 Subject: tools/easylogo/easylogo.c --- CHANGELOG | 2 ++ tools/easylogo/easylogo.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/CHANGELOG b/CHANGELOG index af180eed16..21f1ce0914 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix tools/easylogo build error. + * Update for MCC200 / PRS200 boards: - auto-adjust console device for Linux. - fix typos. diff --git a/tools/easylogo/easylogo.c b/tools/easylogo/easylogo.c index cbec70b87f..9f1d1fff08 100644 --- a/tools/easylogo/easylogo.c +++ b/tools/easylogo/easylogo.c @@ -265,7 +265,7 @@ int image_save_header (image_t *image, char *filename, char *varname) return -1 ; /* Author information */ - fprintf(file, "/*\n * Generated by EasyLogo, (C) 2000 by Paolo Scaffardi\n/*\n"); */ + fprintf(file, "/*\n * Generated by EasyLogo, (C) 2000 by Paolo Scaffardi\n *\n"); fprintf(file, " * To use this, include it and call: easylogo_plot(screen,&%s, width,x,y)\n *\n", varname); fprintf(file, " * Where:\t'screen'\tis the pointer to the frame buffer\n"); fprintf(file, " *\t\t'width'\tis the screen width\n"); -- cgit v1.2.3 From 6608043fd4a87b09bf9109fee663e3d6f68fb70e Mon Sep 17 00:00:00 2001 From: Marian Balakowicz Date: Fri, 1 Sep 2006 19:46:22 +0200 Subject: Fix tools/updater build error. --- CHANGELOG | 2 ++ tools/updater/flash.c | 4 ++-- tools/updater/update.c | 4 ---- 3 files changed, 4 insertions(+), 6 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 21f1ce0914..2e4a922967 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix tools/updater build error. + * Fix tools/easylogo build error. * Update for MCC200 / PRS200 boards: diff --git a/tools/updater/flash.c b/tools/updater/flash.c index 32a17677aa..1ed77b1b18 100644 --- a/tools/updater/flash.c +++ b/tools/updater/flash.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000 + * (C) Copyright 2000-2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -124,7 +124,7 @@ addr2info (ulong addr) * (only some targets require alignment) */ int -flash_write (uchar *src, ulong addr, ulong cnt) +flash_write (char *src, ulong addr, ulong cnt) { #ifdef CONFIG_SPD823TS return (ERR_TIMOUT); /* any other error codes are possible as well */ diff --git a/tools/updater/update.c b/tools/updater/update.c index b6d50d5be0..18f122ad23 100644 --- a/tools/updater/update.c +++ b/tools/updater/update.c @@ -46,10 +46,6 @@ void _main(void) while (1); } -int flash_sect_protect (int p, ulong addr_first, ulong addr_last); -int flash_sect_erase (ulong addr_first, ulong addr_last); -int flash_write (uchar *src, ulong addr, ulong cnt); - void do_updater(void) { unsigned long *addr = &__dummy + 65; -- cgit v1.2.3 From 24d3d3754634532ae262075484e7c1d00d447152 Mon Sep 17 00:00:00 2001 From: Marian Balakowicz Date: Fri, 1 Sep 2006 19:47:42 +0200 Subject: Remove the board/netstar/crcit binary from git repository. --- CHANGELOG | 2 ++ board/netstar/crcit | Bin 11370 -> 0 bytes 2 files changed, 2 insertions(+) delete mode 100755 board/netstar/crcit diff --git a/CHANGELOG b/CHANGELOG index 2e4a922967..229db8387f 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Remove the board/netstar/crcit binary from git repository. + * Fix tools/updater build error. * Fix tools/easylogo build error. diff --git a/board/netstar/crcit b/board/netstar/crcit deleted file mode 100755 index 203645d039..0000000000 Binary files a/board/netstar/crcit and /dev/null differ -- cgit v1.2.3 From f93286397ed2a7084efb0362a43ee09f11702349 Mon Sep 17 00:00:00 2001 From: Marian Balakowicz Date: Fri, 1 Sep 2006 19:49:50 +0200 Subject: Add support for a saving build objects in a separate directory. Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory. --- CHANGELOG | 20 + MAKEALL | 20 +- Makefile | 1241 ++++++++++++++++++-------------- board/AtmarkTechno/suzaku/Makefile | 18 +- board/BuS/EB+MCF-EV123/Makefile | 18 +- board/BuS/EB+MCF-EV123/textbase.mk | 2 +- board/LEOX/elpt860/Makefile | 19 +- board/MAI/AmigaOneG3SE/Makefile | 31 +- board/Marvell/db64360/Makefile | 22 +- board/Marvell/db64460/Makefile | 22 +- board/RPXClassic/Makefile | 18 +- board/RPXlite/Makefile | 18 +- board/RPXlite_dw/Makefile | 18 +- board/RRvision/Makefile | 18 +- board/a3000/Makefile | 18 +- board/adder/Makefile | 19 +- board/adsvix/Makefile | 19 +- board/alaska/Makefile | 19 +- board/altera/dk1c20/Makefile | 21 +- board/altera/dk1s10/Makefile | 21 +- board/altera/ep1c20/Makefile | 25 +- board/altera/ep1s10/Makefile | 25 +- board/altera/ep1s40/Makefile | 25 +- board/amcc/bamboo/Makefile | 17 +- board/amcc/bubinga/Makefile | 16 +- board/amcc/ebony/Makefile | 16 +- board/amcc/luan/Makefile | 17 +- board/amcc/ocotea/Makefile | 16 +- board/amcc/walnut/Makefile | 16 +- board/amcc/yellowstone/Makefile | 16 +- board/amcc/yosemite/Makefile | 16 +- board/amcc/yucca/Makefile | 16 +- board/amirix/ap1000/Makefile | 16 +- board/armadillo/Makefile | 19 +- board/assabet/Makefile | 18 +- board/at91rm9200dk/Makefile | 18 +- board/atc/Makefile | 18 +- board/barco/Makefile | 18 +- board/bc3450/Makefile | 18 +- board/bmw/Makefile | 19 +- board/c2mon/Makefile | 18 +- board/canmb/Makefile | 21 +- board/cds/mpc8541cds/Makefile | 21 +- board/cds/mpc8548cds/Makefile | 21 +- board/cds/mpc8555cds/Makefile | 21 +- board/cerf250/Makefile | 18 +- board/cm4008/Makefile | 20 +- board/cm41xx/Makefile | 20 +- board/cmc_pu2/Makefile | 18 +- board/cmi/Makefile | 21 +- board/cobra5272/Makefile | 18 +- board/cogent/Makefile | 19 +- board/cpc45/Makefile | 18 +- board/cpu86/Makefile | 18 +- board/cpu87/Makefile | 18 +- board/cradle/Makefile | 18 +- board/cray/L1/Makefile | 30 +- board/csb226/Makefile | 18 +- board/csb272/Makefile | 19 +- board/csb472/Makefile | 19 +- board/csb637/Makefile | 18 +- board/cu824/Makefile | 18 +- board/dave/B2/Makefile | 19 +- board/dave/PPChameleonEVB/Makefile | 16 +- board/dbau1x00/Makefile | 18 +- board/delta/Makefile | 18 +- board/dnp1110/Makefile | 18 +- board/eXalion/Makefile | 21 +- board/eltec/bab7xx/Makefile | 18 +- board/eltec/elppc/Makefile | 20 +- board/eltec/mhpc/Makefile | 18 +- board/emk/top5200/Makefile | 21 +- board/emk/top860/Makefile | 21 +- board/ep7312/Makefile | 19 +- board/ep8248/Makefile | 18 +- board/ep8260/Makefile | 18 +- board/ep88x/Makefile | 19 +- board/eric/Makefile | 16 +- board/esd/adciop/Makefile | 19 +- board/esd/apc405/Makefile | 19 +- board/esd/ar405/Makefile | 19 +- board/esd/ash405/Makefile | 19 +- board/esd/canbt/Makefile | 19 +- board/esd/cms700/Makefile | 19 +- board/esd/cpci2dp/Makefile | 19 +- board/esd/cpci405/Makefile | 19 +- board/esd/cpci440/Makefile | 19 +- board/esd/cpci5200/Makefile | 24 +- board/esd/cpci5200/config.mk | 2 +- board/esd/cpci750/Makefile | 22 +- board/esd/cpciiser4/Makefile | 19 +- board/esd/dasa_sim/Makefile | 19 +- board/esd/dp405/Makefile | 19 +- board/esd/du405/Makefile | 19 +- board/esd/hh405/Makefile | 19 +- board/esd/hub405/Makefile | 19 +- board/esd/ocrtc/Makefile | 19 +- board/esd/pci405/Makefile | 19 +- board/esd/pf5200/Makefile | 23 +- board/esd/pf5200/config.mk | 2 +- board/esd/plu405/Makefile | 19 +- board/esd/pmc405/Makefile | 19 +- board/esd/tasreg/Makefile | 18 +- board/esd/voh405/Makefile | 19 +- board/esd/vom405/Makefile | 19 +- board/esd/wuh405/Makefile | 19 +- board/esteem192e/Makefile | 18 +- board/etin/debris/Makefile | 18 +- board/etin/kvme080/Makefile | 16 +- board/etx094/Makefile | 18 +- board/evb4510/Makefile | 20 +- board/evb64260/Makefile | 18 +- board/exbitgen/Makefile | 15 +- board/ezkit533/Makefile | 18 +- board/fads/Makefile | 18 +- board/flagadm/Makefile | 18 +- board/funkwerk/vovpn-gw/Makefile | 18 +- board/g2000/Makefile | 16 +- board/gcplus/Makefile | 18 +- board/gen860t/Makefile | 18 +- board/genietv/Makefile | 18 +- board/gth/Makefile | 18 +- board/gth2/Makefile | 18 +- board/gw8260/Makefile | 18 +- board/hermes/Makefile | 18 +- board/hidden_dragon/Makefile | 18 +- board/hmi1001/Makefile | 18 +- board/hymod/Makefile | 18 +- board/icecube/Makefile | 18 +- board/icecube/config.mk | 2 +- board/icu862/Makefile | 18 +- board/ids8247/Makefile | 19 +- board/impa7/Makefile | 18 +- board/incaip/Makefile | 18 +- board/inka4x0/Makefile | 18 +- board/innokom/Makefile | 18 +- board/integratorap/Makefile | 20 +- board/integratorap/config.mk | 6 + board/integratorap/split_by_variant.sh | 9 +- board/integratorcp/Makefile | 20 +- board/integratorcp/config.mk | 6 + board/integratorcp/split_by_variant.sh | 9 +- board/ip860/Makefile | 18 +- board/iphase4539/Makefile | 19 +- board/ispan/Makefile | 19 +- board/ivm/Makefile | 18 +- board/ixdp425/Makefile | 20 +- board/ixdp425/config.mk | 2 +- board/jse/Makefile | 17 +- board/kb9202/Makefile | 20 +- board/kup/Makefile | 18 +- board/kup/kup4k/Makefile | 21 +- board/kup/kup4x/Makefile | 21 +- board/lantec/Makefile | 18 +- board/lart/Makefile | 18 +- board/logodl/Makefile | 20 +- board/lpd7a40x/Makefile | 18 +- board/lubbock/Makefile | 18 +- board/lwmon/Makefile | 18 +- board/m5271evb/Makefile | 16 +- board/m5272c3/Makefile | 18 +- board/m5282evb/Makefile | 18 +- board/mbx8xx/Makefile | 18 +- board/mcc200/Makefile | 16 +- board/mcc200/config.mk | 2 +- board/ml2/Makefile | 16 +- board/modnet50/Makefile | 20 +- board/mousse/Makefile | 17 +- board/mp2usb/Makefile | 20 +- board/mpc8260ads/Makefile | 18 +- board/mpc8260ads/config.mk | 2 +- board/mpc8266ads/Makefile | 18 +- board/mpc8349emds/Makefile | 16 +- board/mpc8540ads/Makefile | 18 +- board/mpc8540eval/Makefile | 20 +- board/mpc8560ads/Makefile | 18 +- board/mpl/mip405/Makefile | 19 +- board/mpl/pati/Makefile | 24 +- board/mpl/pip405/Makefile | 19 +- board/mpl/vcma9/Makefile | 23 +- board/musenki/Makefile | 19 +- board/mvblue/Makefile | 19 +- board/mvs1/Makefile | 18 +- board/mx1ads/Makefile | 19 +- board/mx1fs2/Makefile | 20 +- board/nc650/Makefile | 18 +- board/nc650/config.mk | 2 +- board/netphone/Makefile | 18 +- board/netstar/Makefile | 55 +- board/netta/Makefile | 18 +- board/netta2/Makefile | 18 +- board/netvia/Makefile | 18 +- board/ns9750dev/Makefile | 18 +- board/nx823/Makefile | 18 +- board/o2dnt/Makefile | 18 +- board/omap1510inn/Makefile | 20 +- board/omap1610inn/Makefile | 20 +- board/omap2420h4/Makefile | 20 +- board/omap5912osk/Makefile | 20 +- board/omap730p2/Makefile | 20 +- board/oxc/Makefile | 18 +- board/pb1x00/Makefile | 18 +- board/pcippc2/Makefile | 20 +- board/pcs440ep/Makefile | 14 +- board/pleb2/Makefile | 18 +- board/pm520/Makefile | 18 +- board/pm826/Makefile | 18 +- board/pm826/config.mk | 2 +- board/pm828/Makefile | 18 +- board/pm828/config.mk | 2 +- board/pm854/Makefile | 18 +- board/pm856/Makefile | 18 +- board/pn62/Makefile | 18 +- board/ppmc7xx/Makefile | 19 +- board/ppmc8260/Makefile | 18 +- board/prodrive/p3p440/Makefile | 16 +- board/prodrive/pdnb3/Makefile | 18 +- board/prodrive/pdnb3/config.mk | 2 +- board/psyent/pci5441/Makefile | 25 +- board/psyent/pk1c20/Makefile | 25 +- board/purple/Makefile | 18 +- board/pxa255_idp/Makefile | 18 +- board/quantum/Makefile | 17 +- board/r360mpi/Makefile | 18 +- board/r5200/Makefile | 18 +- board/rattler/Makefile | 18 +- board/rbc823/Makefile | 18 +- board/rmu/Makefile | 18 +- board/rpxsuper/Makefile | 18 +- board/rsdproto/Makefile | 22 +- board/sacsng/Makefile | 18 +- board/sandburst/karef/Makefile | 19 +- board/sandburst/metrobox/Makefile | 19 +- board/sandpoint/Makefile | 18 +- board/sbc2410x/Makefile | 18 +- board/sbc405/Makefile | 16 +- board/sbc8240/Makefile | 18 +- board/sbc8260/Makefile | 18 +- board/sbc8560/Makefile | 18 +- board/sc520_cdp/Makefile | 19 +- board/sc520_spunk/Makefile | 19 +- board/scb9328/Makefile | 20 +- board/shannon/Makefile | 18 +- board/siemens/CCM/Makefile | 22 +- board/siemens/IAD210/Makefile | 18 +- board/siemens/SCM/Makefile | 21 +- board/siemens/pcu_e/Makefile | 18 +- board/sixnet/Makefile | 18 +- board/sl8245/Makefile | 18 +- board/smdk2400/Makefile | 18 +- board/smdk2410/Makefile | 18 +- board/snmc/qs850/Makefile | 18 +- board/snmc/qs860t/Makefile | 18 +- board/sorcery/Makefile | 19 +- board/spc1920/Makefile | 18 +- board/spd8xx/Makefile | 18 +- board/ssv/adnpesc1/Makefile | 21 +- board/stamp/Makefile | 21 +- board/stxgp3/Makefile | 18 +- board/stxxtc/Makefile | 22 +- board/svm_sc8xx/Makefile | 18 +- board/sx1/Makefile | 20 +- board/tb0229/Makefile | 18 +- board/total5200/Makefile | 18 +- board/total5200/config.mk | 2 +- board/tqm5200/Makefile | 18 +- board/tqm5200/config.mk | 2 +- board/tqm8260/Makefile | 21 +- board/tqm834x/Makefile | 19 +- board/tqm85xx/Makefile | 20 +- board/tqm8xx/Makefile | 18 +- board/trab/Makefile | 36 +- board/trab/config.mk | 2 +- board/uc100/Makefile | 20 +- board/utx8245/Makefile | 18 +- board/v37/Makefile | 18 +- board/versatile/Makefile | 20 +- board/versatile/split_by_variant.sh | 12 +- board/voiceblue/Makefile | 36 +- board/voiceblue/config.mk | 2 +- board/w7o/Makefile | 17 +- board/wepep250/Makefile | 18 +- board/westel/amx860/Makefile | 18 +- board/xaeniax/Makefile | 18 +- board/xilinx/ml300/Makefile | 26 +- board/xm250/Makefile | 20 +- board/xpedite1k/Makefile | 17 +- board/xsengine/Makefile | 18 +- board/zpc1900/Makefile | 18 +- board/zylonite/Makefile | 19 +- board/zylonite/config.mk | 2 - common/Makefile | 23 +- config.mk | 45 +- cpu/74xx_7xx/Makefile | 23 +- cpu/arm1136/Makefile | 18 +- cpu/arm720t/Makefile | 18 +- cpu/arm920t/Makefile | 18 +- cpu/arm920t/at91rm9200/Makefile | 21 +- cpu/arm920t/imx/Makefile | 17 +- cpu/arm920t/ks8695/Makefile | 21 +- cpu/arm920t/s3c24x0/Makefile | 17 +- cpu/arm925t/Makefile | 18 +- cpu/arm926ejs/Makefile | 18 +- cpu/arm926ejs/omap/Makefile | 22 +- cpu/arm926ejs/versatile/Makefile | 22 +- cpu/arm946es/Makefile | 18 +- cpu/arm_intcm/Makefile | 18 +- cpu/bf533/Makefile | 18 +- cpu/i386/Makefile | 23 +- cpu/ixp/Makefile | 18 +- cpu/ixp/npe/Makefile | 23 +- cpu/lh7a40x/Makefile | 18 +- cpu/mcf52x2/Makefile | 18 +- cpu/microblaze/Makefile | 18 +- cpu/mips/Makefile | 22 +- cpu/mpc5xx/Makefile | 21 +- cpu/mpc5xxx/Makefile | 22 +- cpu/mpc8220/Makefile | 22 +- cpu/mpc824x/Makefile | 31 +- cpu/mpc8260/Makefile | 20 +- cpu/mpc83xx/Makefile | 30 +- cpu/mpc85xx/Makefile | 18 +- cpu/mpc8xx/Makefile | 22 +- cpu/nios/Makefile | 24 +- cpu/nios2/Makefile | 24 +- cpu/ppc4xx/Makefile | 18 +- cpu/pxa/Makefile | 18 +- cpu/s3c44b0/Makefile | 18 +- cpu/sa1100/Makefile | 18 +- disk/Makefile | 17 +- drivers/Makefile | 17 +- drivers/nand/Makefile | 41 +- drivers/nand_legacy/Makefile | 41 +- drivers/sk98lin/Makefile | 26 +- dtt/Makefile | 18 +- examples/Makefile | 42 +- fs/Makefile | 4 +- fs/cramfs/Makefile | 16 +- fs/ext2/Makefile | 18 +- fs/fat/Makefile | 15 +- fs/fdos/Makefile | 17 +- fs/jffs2/Makefile | 16 +- fs/reiserfs/Makefile | 18 +- lib_arm/Makefile | 17 +- lib_blackfin/Makefile | 18 +- lib_generic/Makefile | 17 +- lib_i386/Makefile | 17 +- lib_m68k/Makefile | 19 +- lib_microblaze/Makefile | 17 +- lib_mips/Makefile | 17 +- lib_nios/Makefile | 17 +- lib_nios2/Makefile | 17 +- lib_ppc/Makefile | 17 +- mkconfig | 30 +- net/Makefile | 18 +- post/Makefile | 2 +- post/cpu/Makefile | 2 +- post/rules.mk | 14 +- rtc/Makefile | 17 +- rules.mk | 35 + tools/Makefile | 98 +-- tools/env/Makefile | 27 +- tools/gdb/Makefile | 23 +- tools/updater/Makefile | 93 ++- 364 files changed, 4980 insertions(+), 3105 deletions(-) create mode 100644 rules.mk diff --git a/CHANGELOG b/CHANGELOG index 229db8387f..b2f2aa9c92 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,26 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add support for a saving build objects in a separate directory. + Modifications are based on the linux kernel approach and + support two use cases: + + 1) Add O= to the make command line + 'make O=/tmp/build all' + + 2) Set environement variable BUILD_DIR to point to the desired location + 'export BUILD_DIR=/tmp/build' + 'make' + + The second approach can also be used with a MAKEALL script + 'export BUILD_DIR=/tmp/build' + './MAKEALL' + + Command line 'O=' setting overrides BUILD_DIR environent variable. + + When none of the above methods is used the local build is performed and + the object files are placed in the source directory. + * Remove the board/netstar/crcit binary from git repository. * Fix tools/updater build error. diff --git a/MAKEALL b/MAKEALL index 720ab03bd3..d2f86d3ac8 100755 --- a/MAKEALL +++ b/MAKEALL @@ -8,7 +8,17 @@ else MAKE=make fi -[ -d LOG ] || mkdir LOG || exit 1 +if [ "${MAKEALL_LOGDIR}" ] ; then + LOG_DIR=${MAKEALL_LOGDIR} +else + LOG_DIR="LOG" +fi + +if [ ! "${BUILD_DIR}" ] ; then + BUILD_DIR="." +fi + +[ -d ${MAKEALL_LOGDIR} ] || mkdir ${MAKEALL_LOGDIR} || exit 1 LIST="" @@ -303,8 +313,12 @@ build_target() { ${MAKE} distclean >/dev/null ${MAKE} ${target}_config - ${MAKE} ${JOBS} all 2>&1 >LOG/$target.MAKELOG | tee LOG/$target.ERR - ${CROSS_COMPILE:-ppc_8xx-}size u-boot | tee -a LOG/$target.MAKELOG + + ${MAKE} ${JOBS} all 2>&1 >${LOG_DIR}/$target.MAKELOG \ + | tee ${LOG_DIR}/$target.ERR + + ${CROSS_COMPILE:-ppc_8xx-}size ${BUILD_DIR}/u-boot \ + | tee -a ${LOG_DIR}/$target.MAKELOG } #----------------------------------------------------------------------- diff --git a/Makefile b/Makefile index 9bf7c49fb9..fc7b117e3f 100644 --- a/Makefile +++ b/Makefile @@ -26,7 +26,7 @@ PATCHLEVEL = 1 SUBLEVEL = 4 EXTRAVERSION = U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) -VERSION_FILE = include/version_autogenerated.h +VERSION_FILE = $(obj)include/version_autogenerated.h HOSTARCH := $(shell uname -m | \ sed -e s/i.86/i386/ \ @@ -44,15 +44,74 @@ export HOSTARCH HOSTOS # Deal with colliding definitions from tcsh etc. VENDOR= +######################################################################### +# +# U-boot build supports producing a object files to the separate external +# directory. Two use cases are supported: +# +# 1) Add O= to the make command line +# 'make O=/tmp/build all' +# +# 2) Set environement variable BUILD_DIR to point to the desired location +# 'export BUILD_DIR=/tmp/build' +# 'make' +# +# The second approach can also be used with a MAKEALL script +# 'export BUILD_DIR=/tmp/build' +# './MAKEALL' +# +# Command line 'O=' setting overrides BUILD_DIR environent variable. +# +# When none of the above methods is used the local build is performed and +# the object files are placed in the source directory. +# + +ifdef O +ifeq ("$(origin O)", "command line") +BUILD_DIR := $(O) +endif +endif + +ifneq ($(BUILD_DIR),) +saved-output := $(BUILD_DIR) +BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) +$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) +endif # ifneq ($(BUILD_DIR),) + +OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) +SRCTREE := $(CURDIR) +TOPDIR := $(SRCTREE) +LNDIR := $(OBJTREE) +export TOPDIR SRCTREE OBJTREE + +MKCONFIG := $(SRCTREE)/mkconfig +export MKCONFIG + +ifneq ($(OBJTREE),$(SRCTREE)) +REMOTE_BUILD := 1 +export REMOTE_BUILD +endif + +# $(obj) and (src) are defined in config.mk but here in main Makefile +# we also need them before config.mk is included which is the case for +# some targets like unconfig, clean, clobber, distclean, etc. +ifneq ($(OBJTREE),$(SRCTREE)) +obj := $(OBJTREE)/ +src := $(SRCTREE)/ +else +obj := +src := +endif +export obj src + ######################################################################### -TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi) -export TOPDIR +ifeq ($(OBJTREE)/include/config.mk,$(wildcard $(OBJTREE)/include/config.mk)) -ifeq (include/config.mk,$(wildcard include/config.mk)) # load ARCH, BOARD, and CPU configuration -include include/config.mk +include $(OBJTREE)/include/config.mk export ARCH CPU BOARD VENDOR SOC + ifndef CROSS_COMPILE ifeq ($(HOSTARCH),ppc) CROSS_COMPILE = @@ -96,7 +155,6 @@ export CROSS_COMPILE # load other configuration include $(TOPDIR)/config.mk - ######################################################################### # U-Boot objects....order is important (i.e. start must be first) @@ -119,6 +177,8 @@ OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o OBJS += cpu/$(CPU)/cplbhdlr.o cpu/$(CPU)/cplbmgr.o cpu/$(CPU)/flush.o endif +OBJS := $(addprefix $(obj),$(OBJS)) + LIBS = lib_generic/libgeneric.a LIBS += board/$(BOARDDIR)/lib$(BOARD).a LIBS += cpu/$(CPU)/lib$(CPU).a @@ -139,12 +199,13 @@ LIBS += drivers/sk98lin/libsk98lin.a LIBS += post/libpost.a post/cpu/libcpu.a LIBS += common/libcommon.a LIBS += $(BOARDLIBS) + +LIBS := $(addprefix $(obj),$(LIBS)) .PHONY : $(LIBS) # Add GCC lib PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc - # The "tools" are needed early, so put this first # Don't include stuff already done in $(LIBS) SUBDIRS = tools \ @@ -153,40 +214,46 @@ SUBDIRS = tools \ post/cpu .PHONY : $(SUBDIRS) +__OBJS := $(subst $(obj),,$(OBJS)) +__LIBS := $(subst $(obj),,$(LIBS)) + ######################################################################### ######################################################################### -ALL = u-boot.srec u-boot.bin System.map +ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map all: $(ALL) -u-boot.hex: u-boot +$(obj)u-boot.hex: $(obj)u-boot $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -u-boot.srec: u-boot +$(obj)u-boot.srec: $(obj)u-boot $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -u-boot.bin: u-boot +$(obj)u-boot.bin: $(obj)u-boot $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -u-boot.img: u-boot.bin +$(obj)u-boot.img: $(obj)u-boot.bin ./tools/mkimage -A $(ARCH) -T firmware -C none \ -a $(TEXT_BASE) -e 0 \ -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ -d $< $@ -u-boot.dis: u-boot +$(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ -u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT) +$(obj)u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT) UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ - $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \ - --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \ + cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ + --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ -Map u-boot.map -o u-boot +$(OBJS): + $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) + $(LIBS): - $(MAKE) -C `dirname $@` + $(MAKE) -C $(dir $(subst $(obj),,$@)) $(SUBDIRS): $(MAKE) -C $@ all @@ -199,33 +266,42 @@ version: echo "\"" >> $(VERSION_FILE) gdbtools: - $(MAKE) -C tools/gdb || exit 1 + $(MAKE) -C tools/gdb all || exit 1 + +updater: + $(MAKE) -C tools/updater all || exit 1 + +env: + $(MAKE) -C tools/env all || exit 1 depend dep: - @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done + for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done -tags: - ctags -w `find $(SUBDIRS) include \ +tags ctags: + ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) include \ lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ fs/cramfs fs/fat fs/fdos fs/jffs2 \ net disk rtc dtt drivers drivers/sk98lin common \ \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` etags: - etags -a `find $(SUBDIRS) include \ + etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) include \ lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ fs/cramfs fs/fat fs/fdos fs/jffs2 \ net disk rtc dtt drivers drivers/sk98lin common \ \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` -System.map: u-boot +$(obj)System.map: $(obj)u-boot @$(NM) $< | \ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ - sort > System.map + sort > $(obj)System.map ######################################################################### else -all install u-boot u-boot.srec depend dep: +all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ +$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ +$(SUBDIRS) version gdbtools updater env depend \ +dep tags ctags etags $(obj)System.map: @echo "System not configured - see README" >&2 @ exit 1 endif @@ -233,7 +309,7 @@ endif ######################################################################### unconfig: - @rm -f include/config.h include/config.mk board/*/config.tmp + @rm -f $(obj)include/config.h $(obj)include/config.mk $(obj)board/*/config.tmp #======================================================================== # PowerPC @@ -244,29 +320,29 @@ unconfig: ######################################################################### canmb_config: unconfig - @./mkconfig -a canmb ppc mpc5xxx canmb + @$(MKCONFIG) -a canmb ppc mpc5xxx canmb cmi_mpc5xx_config: unconfig - @./mkconfig $(@:_config=) ppc mpc5xx cmi + @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi PATI_config: unconfig - @./mkconfig $(@:_config=) ppc mpc5xx pati mpl + @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl ######################################################################### ## MPC5xxx Systems ######################################################################### aev_config: unconfig - @./mkconfig -a aev ppc mpc5xxx tqm5200 + @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 BC3450_config: unconfig - @./mkconfig -a BC3450 ppc mpc5xxx bc3450 + @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450 cpci5200_config: unconfig - @./mkconfig -a cpci5200 ppc mpc5xxx cpci5200 esd + @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd hmi1001_config: unconfig - @./mkconfig hmi1001 ppc mpc5xxx hmi1001 + @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001 Lite5200_config \ Lite5200_LOWBOOT_config \ @@ -278,49 +354,53 @@ icecube_5200_DDR_config \ icecube_5200_DDR_LOWBOOT_config \ icecube_5200_DDR_LOWBOOT08_config \ icecube_5100_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @mkdir -p $(obj)board/icecube + @ >$(obj)include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ { if [ "$(findstring DDR,$@)" ] ; \ - then echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \ - else echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \ + then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ + else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ fi ; \ echo "... with LOWBOOT configuration" ; \ } @[ -z "$(findstring LOWBOOT08,$@)" ] || \ - { echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \ + { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ echo "... with 8 MB flash only" ; \ echo "... with LOWBOOT configuration" ; \ } @[ -z "$(findstring DDR,$@)" ] || \ - { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ + { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ echo "... DDR memory revision" ; \ } @[ -z "$(findstring 5200,$@)" ] || \ - { echo "#define CONFIG_MPC5200" >>include/config.h ; \ + { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ echo "... with MPC5200 processor" ; \ } @[ -z "$(findstring 5100,$@)" ] || \ - { echo "#define CONFIG_MGT5100" >>include/config.h ; \ + { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ echo "... with MGT5100 processor" ; \ } - @./mkconfig -a IceCube ppc mpc5xxx icecube + @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube inka4x0_config: unconfig - @./mkconfig inka4x0 ppc mpc5xxx inka4x0 + @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 lite5200b_config \ lite5200b_LOWBOOT_config: unconfig - @ >include/config.h - @ echo "#define CONFIG_MPC5200_DDR" >>include/config.h + @mkdir -p $(obj)include + @mkdir -p $(obj)board/icecube + @ >$(obj)include/config.h + @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h @ echo "... DDR memory revision" - @ echo "#define CONFIG_MPC5200" >>include/config.h - @ echo "#define CONFIG_LITE5200B" >>include/config.h + @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h + @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \ + { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ echo "... with LOWBOOT configuration" ; \ } @ echo "... with MPC5200B processor" - @./mkconfig -a IceCube ppc mpc5xxx icecube + @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube mcc200_config \ mcc200_SDRAM_config \ @@ -334,12 +414,14 @@ prs200_config \ prs200_DDR_config \ prs200_highboot_config \ prs200_highboot_DDR_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @mkdir -p $(obj)board/mcc200 + @ >$(obj)include/config.h @[ -n "$(findstring highboot,$@)" ] || \ { echo "... with lowboot configuration" ; \ } @[ -z "$(findstring highboot,$@)" ] || \ - { echo "TEXT_BASE = 0xFFF00000" >board/mcc200/config.tmp ; \ + { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ echo "... with highboot configuration" ; \ } @[ -n "$(findstring _SDRAM,$@)" ] || \ @@ -351,92 +433,97 @@ prs200_highboot_DDR_config: unconfig then \ echo "... with DDR" ; \ else \ - echo "#define CONFIG_MCC200_SDRAM" >>include/config.h ;\ + echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ echo "... with SDRAM" ; \ fi; \ fi; \ } @[ -z "$(findstring _SDRAM,$@)" ] || \ - { echo "#define CONFIG_MCC200_SDRAM" >>include/config.h ; \ + { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ echo "... with SDRAM" ; \ } @[ -z "$(findstring COM12,$@)" ] || \ - { echo "#define CONFIG_CONSOLE_COM12" >>include/config.h ; \ + { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ echo "... with console on COM12" ; \ } @[ -z "$(findstring prs200,$@)" ] || \ - { echo "#define CONFIG_PRS200" >>include/config.h ;\ + { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ } - @./mkconfig -n $@ -a mcc200 ppc mpc5xxx mcc200 + @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200 o2dnt_config: - @./mkconfig o2dnt ppc mpc5xxx o2dnt + @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt pf5200_config: unconfig - @./mkconfig pf5200 ppc mpc5xxx pf5200 esd + @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd PM520_config \ PM520_DDR_config \ PM520_ROMBOOT_config \ PM520_ROMBOOT_DDR_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring DDR,$@)" ] || \ - { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ + { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ echo "... DDR memory revision" ; \ } @[ -z "$(findstring ROMBOOT,$@)" ] || \ - { echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ + { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ echo "... booting from 8-bit flash" ; \ } - @./mkconfig -a PM520 ppc mpc5xxx pm520 + @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520 smmaco4_config: unconfig - @./mkconfig -a smmaco4 ppc mpc5xxx tqm5200 + @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 spieval_config: unconfig - @./mkconfig -a spieval ppc mpc5xxx tqm5200 + @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 TB5200_B_config \ TB5200_config: unconfig + @mkdir -p $(obj)include @[ -z "$(findstring _B,$@)" ] || \ - { echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ + { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ echo "... with MPC5200B processor" ; \ } - @./mkconfig -n $@ -a TB5200 ppc mpc5xxx tqm5200 + @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 MINI5200_config \ EVAL5200_config \ TOP5200_config: unconfig - @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h - @./mkconfig -n $@ -a TOP5200 ppc mpc5xxx top5200 emk + @mkdir -p $(obj)include + @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h + @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk Total5100_config \ Total5200_config \ Total5200_lowboot_config \ Total5200_Rev2_config \ Total5200_Rev2_lowboot_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @mkdir -p $(obj)board/total5200 + @ >$(obj)include/config.h @[ -z "$(findstring 5100,$@)" ] || \ - { echo "#define CONFIG_MGT5100" >>include/config.h ; \ + { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ echo "... with MGT5100 processor" ; \ } @[ -z "$(findstring 5200,$@)" ] || \ - { echo "#define CONFIG_MPC5200" >>include/config.h ; \ + { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ echo "... with MPC5200 processor" ; \ } @[ -n "$(findstring Rev,$@)" ] || \ - { echo "#define CONFIG_TOTAL5200_REV 1" >>include/config.h ; \ + { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ echo "... revision 1 board" ; \ } @[ -z "$(findstring Rev2_,$@)" ] || \ - { echo "#define CONFIG_TOTAL5200_REV 2" >>include/config.h ; \ + { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ echo "... revision 2 board" ; \ } @[ -z "$(findstring lowboot_,$@)" ] || \ - { echo "TEXT_BASE = 0xFE000000" >board/total5200/config.tmp ; \ + { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ echo "... with lowboot configuration" ; \ } - @./mkconfig -a Total5200 ppc mpc5xxx total5200 + @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200 cam5200_config \ fo300_config \ @@ -447,36 +534,38 @@ TQM5200_B_config \ TQM5200_B_HIGHBOOT_config \ TQM5200_config \ TQM5200_STK100_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @mkdir -p $(obj)board/tqm5200 + @ >$(obj)include/config.h @[ -z "$(findstring cam5200,$@)" ] || \ - { echo "#define CONFIG_CAM5200" >>include/config.h ; \ - echo "#define CONFIG_TQM5200S" >>include/config.h ; \ - echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ + { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ echo "... TQM5200S on Cam5200" ; \ } @[ -z "$(findstring fo300,$@)" ] || \ - { echo "#define CONFIG_FO300" >>include/config.h ; \ + { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ echo "... TQM5200 on FO300" ; \ } @[ -z "$(findstring MiniFAP,$@)" ] || \ - { echo "#define CONFIG_MINIFAP" >>include/config.h ; \ + { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ echo "... TQM5200_AC on MiniFAP" ; \ } @[ -z "$(findstring STK100,$@)" ] || \ - { echo "#define CONFIG_STK52XX_REV100" >>include/config.h ; \ + { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ echo "... on a STK52XX.100 base board" ; \ } @[ -z "$(findstring TQM5200_B,$@)" ] || \ - { echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ + { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ } @[ -z "$(findstring TQM5200S,$@)" ] || \ - { echo "#define CONFIG_TQM5200S" >>include/config.h ; \ - echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ + { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ } @[ -z "$(findstring HIGHBOOT,$@)" ] || \ - { echo "TEXT_BASE = 0xFFF00000" >board/tqm5200/config.tmp ; \ + { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ } - @./mkconfig -n $@ -a TQM5200 ppc mpc5xxx tqm5200 + @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 ######################################################################### ## MPC8xx Systems @@ -486,9 +575,10 @@ Adder_config \ Adder87x_config \ AdderII_config \ : unconfig + @mkdir -p $(obj)include $(if $(findstring AdderII,$@), \ - @echo "#define CONFIG_MPC852T" > include/config.h) - @./mkconfig -a Adder ppc mpc8xx adder + @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) + @$(MKCONFIG) -a Adder ppc mpc8xx adder ADS860_config \ FADS823_config \ @@ -496,154 +586,160 @@ FADS850SAR_config \ MPC86xADS_config \ MPC885ADS_config \ FADS860T_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx fads + @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads AMX860_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx amx860 westel + @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel c2mon_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx c2mon + @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon CCM_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx CCM siemens + @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens cogent_mpc8xx_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx cogent + @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent ELPT860_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX + @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX EP88x_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx ep88x + @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x ESTEEM192E_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx esteem192e + @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e ETX094_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx etx094 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094 FLAGADM_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx flagadm + @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) GEN860T_SC_config \ GEN860T_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _SC,$@)" ] || \ - { echo "#define CONFIG_SC" >>include/config.h ; \ + { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ echo "With reduced H/W feature set (SC)..." ; \ } - @./mkconfig -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t + @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t GENIETV_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx genietv + @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv GTH_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx gth + @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth hermes_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx hermes + @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes HMI10_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx + @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx IAD210_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens + @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) ICU862_100MHz_config \ ICU862_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _100MHz,$@)" ] || \ - { echo "#define CONFIG_100MHz" >>include/config.h ; \ + { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ echo "... with 100MHz system clock" ; \ } - @./mkconfig -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 + @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 IP860_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx ip860 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860 IVML24_256_config \ IVML24_128_config \ IVML24_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring IVML24_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_16M" >>include/config.h ; \ + { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ } @[ -z "$(findstring IVML24_128_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_32M" >>include/config.h ; \ + { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ } @[ -z "$(findstring IVML24_256_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_64M" >>include/config.h ; \ + { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ } - @./mkconfig -a IVML24 ppc mpc8xx ivm + @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm IVMS8_256_config \ IVMS8_128_config \ IVMS8_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring IVMS8_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_16M" >>include/config.h ; \ + { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ } @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_32M" >>include/config.h ; \ + { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ } @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_64M" >>include/config.h ; \ + { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ } - @./mkconfig -a IVMS8 ppc mpc8xx ivm + @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm KUP4K_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx kup4k kup + @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup KUP4X_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx kup4x kup + @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup LANTEC_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx lantec + @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec lwmon_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx lwmon + @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon MBX_config \ MBX860T_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx mbx8xx + @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx MHPC_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx mhpc eltec + @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec MVS1_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx mvs1 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx mvs1 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) NETVIA_V2_config \ NETVIA_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring NETVIA_config,$@)" ] || \ - { echo "#define CONFIG_NETVIA_VERSION 1" >>include/config.h ; \ + { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ echo "... Version 1" ; \ } @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETVIA_VERSION 2" >>include/config.h ; \ + { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ echo "... Version 2" ; \ } - @./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia + @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) NETPHONE_V2_config \ NETPHONE_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring NETPHONE_config,$@)" ] || \ - { echo "#define CONFIG_NETPHONE_VERSION 1" >>include/config.h ; \ + { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ } @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETPHONE_VERSION 2" >>include/config.h ; \ + { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ } - @./mkconfig -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone + @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) @@ -655,85 +751,88 @@ NETTA_ISDN_6412_config \ NETTA_ISDN_config \ NETTA_6412_config \ NETTA_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring ISDN_,$@)" ] || \ - { echo "#define CONFIG_NETTA_ISDN 1" >>include/config.h ; \ + { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ } @[ -n "$(findstring ISDN_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_ISDN" >>include/config.h ; \ + { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ } @[ -z "$(findstring 6412_,$@)" ] || \ - { echo "#define CONFIG_NETTA_6412 1" >>include/config.h ; \ + { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ } @[ -n "$(findstring 6412_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_6412" >>include/config.h ; \ + { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ } @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ - { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>include/config.h ; \ + { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ } @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_SWAPHOOK" >>include/config.h ; \ + { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ } - @./mkconfig -a $(call xtract_NETTA,$@) ppc mpc8xx netta + @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) NETTA2_V2_config \ NETTA2_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring NETTA2_config,$@)" ] || \ - { echo "#define CONFIG_NETTA2_VERSION 1" >>include/config.h ; \ + { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ } @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETTA2_VERSION 2" >>include/config.h ; \ + { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ } - @./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 + @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 NC650_Rev1_config \ NC650_Rev2_config \ CP850_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring CP850,$@)" ] || \ - { echo "#define CONFIG_CP850 1" >>include/config.h ; \ - echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \ + { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ + echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ } @[ -z "$(findstring Rev1,$@)" ] || \ - { echo "#define CONFIG_IDS852_REV1 1" >>include/config.h ; \ + { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ } @[ -z "$(findstring Rev2,$@)" ] || \ - { echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \ + { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ } - @./mkconfig -a NC650 ppc mpc8xx nc650 + @$(MKCONFIG) -a NC650 ppc mpc8xx nc650 NX823_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx nx823 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823 pcu_e_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens + @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens QS850_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc + @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc QS823_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc + @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc QS860T_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc + @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc quantum_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx quantum + @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum R360MPI_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx r360mpi + @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi RBC823_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx rbc823 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823 RPXClassic_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx RPXClassic + @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic RPXlite_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx RPXlite + @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite RPXlite_DW_64_config \ RPXlite_DW_LCD_config \ @@ -743,55 +842,56 @@ RPXlite_DW_NVRAM_64_config \ RPXlite_DW_NVRAM_LCD_config \ RPXlite_DW_NVRAM_64_LCD_config \ RPXlite_DW_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _64,$@)" ] || \ - { echo "#define RPXlite_64MHz" >>include/config.h ; \ + { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ echo "... with 64MHz system clock ..."; \ } @[ -z "$(findstring _LCD,$@)" ] || \ - { echo "#define CONFIG_LCD" >>include/config.h ; \ - echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \ + { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ + echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ echo "... with LCD display ..."; \ } @[ -z "$(findstring _NVRAM,$@)" ] || \ - { echo "#define CFG_ENV_IS_IN_NVRAM" >>include/config.h ; \ + { echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ echo "... with ENV in NVRAM ..."; \ } - @./mkconfig -a RPXlite_DW ppc mpc8xx RPXlite_dw + @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw rmu_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx rmu + @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu RRvision_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx RRvision + @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision RRvision_LCD_config: unconfig - @echo "#define CONFIG_LCD" >include/config.h - @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h - @./mkconfig -a RRvision ppc mpc8xx RRvision + @mkdir -p $(obj)include + @echo "#define CONFIG_LCD" >$(obj)include/config.h + @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h + @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision SM850_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx + @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx spc1920_config: - @./mkconfig $(@:_config=) ppc mpc8xx spc1920 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920 SPD823TS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx spd8xx + @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx stxxtc_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx stxxtc + @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc svm_sc8xx_config: unconfig - @ >include/config.h - @./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx + @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx SXNI855T_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx sixnet + @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet # EMK MPC8xx based modules TOP860_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx top860 emk + @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk # Play some tricks for configuration selection # Only 855 and 860 boards may come with FEC @@ -815,31 +915,35 @@ TQM862M_config \ TQM866M_config \ TQM885D_config \ virtlab2_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _LCD,$@)" ] || \ - { echo "#define CONFIG_LCD" >>include/config.h ; \ - echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \ + { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ + echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ echo "... with LCD display" ; \ } - @./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx + @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx TTTech_config: unconfig - @echo "#define CONFIG_LCD" >include/config.h - @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h - @./mkconfig -a TQM823L ppc mpc8xx tqm8xx + @mkdir -p $(obj)include + @echo "#define CONFIG_LCD" >$(obj)include/config.h + @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h + @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx uc100_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx uc100 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100 v37_config: unconfig - @echo "#define CONFIG_LCD" >include/config.h - @echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h - @./mkconfig $(@:_config=) ppc mpc8xx v37 + @mkdir -p $(obj)include + @echo "#define CONFIG_LCD" >$(obj)include/config.h + @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h + @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37 wtk_config: unconfig - @echo "#define CONFIG_LCD" >include/config.h - @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>include/config.h - @./mkconfig -a TQM823L ppc mpc8xx tqm8xx + @mkdir -p $(obj)include + @echo "#define CONFIG_LCD" >$(obj)include/config.h + @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h + @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx ######################################################################### ## PPC4xx Systems @@ -847,146 +951,148 @@ wtk_config: unconfig xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) ADCIOP_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx adciop esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd AP1000_config:unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ap1000 amirix + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix APC405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx apc405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd AR405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ar405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd ASH405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ash405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd bamboo_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc bubinga_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc CANBT_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx canbt esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd CATcenter_config \ CATcenter_25_config \ CATcenter_33_config: unconfig - @ echo "/* CATcenter uses PPChameleon Model ME */" > include/config.h - @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h + @mkdir -p $(obj)include + @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h + @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h @[ -z "$(findstring _25,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ echo "SysClk = 25MHz" ; \ } @[ -z "$(findstring _33,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ echo "SysClk = 33MHz" ; \ } - @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave + @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave CPCI2DP_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx cpci2dp esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd CPCI405_config \ CPCI4052_config \ CPCI405DT_config \ CPCI405AB_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd - @echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk + @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd + @echo "BOARD_REVISION = $(@:_config=)" >> $(obj)include/config.mk CPCI440_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx cpci440 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci440 esd CPCIISER4_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd CRAYL1_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx L1 cray + @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray csb272_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx csb272 + @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272 csb472_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx csb472 + @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472 DASA_SIM_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd DP405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx dp405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd DU405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx du405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd ebony_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ebony amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc ERIC_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx eric + @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric EXBITGEN_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx exbitgen + @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen G2000_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx g2000 + @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 HH405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx hh405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd HUB405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx hub405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd JSE_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx jse + @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse KAREF_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx karef sandburst + @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst luan_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx luan amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc METROBOX_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst + @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst MIP405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl + @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl MIP405T_config: unconfig - @echo "#define CONFIG_MIP405T" >include/config.h + @mkdir -p $(obj)include + @echo "#define CONFIG_MIP405T" >$(obj)include/config.h @echo "Enable subset config for MIP405T" - @./mkconfig -a MIP405 ppc ppc4xx mip405 mpl + @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl ML2_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ml2 + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2 ml300_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx ocotea_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc OCRTC_config \ ORSG_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd p3p440_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx p3p440 prodrive + @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive PCI405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx pci405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd pcs440ep_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx pcs440ep + @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep PIP405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl + @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl PLU405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx plu405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd PMC405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd PPChameleonEVB_config \ PPChameleonEVB_BA_25_config \ @@ -995,66 +1101,67 @@ PPChameleonEVB_HI_25_config \ PPChameleonEVB_BA_33_config \ PPChameleonEVB_ME_33_config \ PPChameleonEVB_HI_33_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring EVB_BA,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ echo "... BASIC model" ; \ } @[ -z "$(findstring EVB_ME,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ echo "... MEDIUM model" ; \ } @[ -z "$(findstring EVB_HI,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ echo "... HIGH-END model" ; \ } @[ -z "$(findstring _25,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ echo "SysClk = 25MHz" ; \ } @[ -z "$(findstring _33,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ echo "SysClk = 33MHz" ; \ } - @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave + @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave sbc405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx sbc405 + @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 sycamore_config: unconfig @echo "Configuring for sycamore board as subset of walnut..." - @./mkconfig -a walnut ppc ppc4xx walnut amcc + @$(MKCONFIG) -a walnut ppc ppc4xx walnut amcc VOH405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx voh405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd VOM405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx vom405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd CMS700_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx cms700 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd W7OLMC_config \ W7OLMG_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx w7o + @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o walnut_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx walnut amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx walnut amcc WUH405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd XPEDITE1K_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx xpedite1k + @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k yosemite_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx yosemite amcc yellowstone_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx yellowstone amcc yucca_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx yucca amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc ######################################################################### ## MPC8220 Systems @@ -1062,10 +1169,10 @@ yucca_config: unconfig Alaska8220_config \ Yukon8220_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8220 alaska + @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska sorcery_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8220 sorcery + @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery ######################################################################### ## MPC824x Systems @@ -1073,18 +1180,18 @@ sorcery_config: unconfig xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) A3000_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x a3000 + @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000 barco_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x barco + @$(MKCONFIG) $(@:_config=) ppc mpc824x barco BMW_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x bmw + @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw CPC45_config \ CPC45_ROMBOOT_config: unconfig - @./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45 - @cd ./include ; \ + @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45 + @cd $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ echo "... booting from 8-bit flash" ; \ @@ -1095,64 +1202,64 @@ CPC45_ROMBOOT_config: unconfig echo "export CONFIG_BOOT_ROM" >> config.mk; CU824_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x cu824 + @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824 debris_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x debris etin + @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin eXalion_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x eXalion + @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion HIDDEN_DRAGON_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x hidden_dragon + @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon kvme080_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x kvme080 etin + @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin MOUSSE_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x mousse + @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse MUSENKI_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x musenki + @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki MVBLUE_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x mvblue + @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue OXC_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x oxc + @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc PN62_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x pn62 + @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62 Sandpoint8240_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x sandpoint + @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint Sandpoint8245_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x sandpoint + @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint sbc8240_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x sbc8240 + @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240 SL8245_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x sl8245 + @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245 utx8245_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x utx8245 + @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245 ######################################################################### ## MPC8260 Systems ######################################################################### atc_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 atc + @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc cogent_mpc8260_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 cogent + @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent CPU86_config \ CPU86_ROMBOOT_config: unconfig - @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu86 - @cd ./include ; \ + @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86 + @cd $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ echo "... booting from 8-bit flash" ; \ @@ -1164,8 +1271,8 @@ CPU86_ROMBOOT_config: unconfig CPU87_config \ CPU87_ROMBOOT_config: unconfig - @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87 - @cd ./include ; \ + @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87 + @cd $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ echo "... booting from 8-bit flash" ; \ @@ -1177,29 +1284,30 @@ CPU87_ROMBOOT_config: unconfig ep8248_config \ ep8248E_config : unconfig - @./mkconfig ep8248 ppc mpc8260 ep8248 + @$(MKCONFIG) ep8248 ppc mpc8260 ep8248 ep8260_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 ep8260 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260 gw8260_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 gw8260 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260 hymod_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 hymod + @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod IDS8247_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 ids8247 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247 IPHASE4539_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 iphase4539 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539 ISPAN_config \ ISPAN_REVB_config: unconfig + @mkdir -p $(obj)include @if [ "$(findstring _REVB_,$@)" ] ; then \ - echo "#define CFG_REV_B" > include/config.h ; \ + echo "#define CFG_REV_B" > $(obj)include/config.h ; \ fi - @./mkconfig -a ISPAN ppc mpc8260 ispan + @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan MPC8260ADS_config \ MPC8260ADS_lowboot_config \ @@ -1218,21 +1326,23 @@ PQ2FADS-ZU_lowboot_config \ PQ2FADS-ZU_66MHz_config \ PQ2FADS-ZU_66MHz_lowboot_config \ : unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/mpc8260ads $(if $(findstring PQ2FADS,$@), \ - @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \ - @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > include/config.h) + @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \ + @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) $(if $(findstring MHz,$@), \ - @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \ + @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ $(if $(findstring VR,$@), \ - @echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h)) + @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) @[ -z "$(findstring lowboot_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \ + { echo "TEXT_BASE = 0xFF800000" >$(obj)board/mpc8260ads/config.tmp ; \ echo "... with lowboot configuration" ; \ } - @./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads + @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads MPC8266ADS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads + @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads # PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash PM825_config \ @@ -1243,71 +1353,76 @@ PM826_config \ PM826_ROMBOOT_config \ PM826_BIGFLASH_config \ PM826_ROMBOOT_BIGFLASH_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/pm826 @if [ "$(findstring PM825_,$@)" ] ; then \ - echo "#define CONFIG_PCI" >include/config.h ; \ + echo "#define CONFIG_PCI" >$(obj)include/config.h ; \ else \ - >include/config.h ; \ + >$(obj)include/config.h ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "... booting from 8-bit flash" ; \ - echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ - echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \ + echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ + echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ echo "... with 32 MB Flash" ; \ - echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \ + echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ fi; \ else \ echo "... booting from 64-bit flash" ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ echo "... with 32 MB Flash" ; \ - echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \ - echo "TEXT_BASE = 0x40000000" >board/pm826/config.tmp ; \ + echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ + echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \ else \ - echo "TEXT_BASE = 0xFF000000" >board/pm826/config.tmp ; \ + echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ fi; \ fi - @./mkconfig -a PM826 ppc mpc8260 pm826 + @$(MKCONFIG) -a PM826 ppc mpc8260 pm826 PM828_config \ PM828_PCI_config \ PM828_ROMBOOT_config \ PM828_ROMBOOT_PCI_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/pm826 @if [ "$(findstring _PCI_,$@)" ] ; then \ - echo "#define CONFIG_PCI" >>include/config.h ; \ + echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ echo "... with PCI enabled" ; \ else \ - >include/config.h ; \ + >$(obj)include/config.h ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "... booting from 8-bit flash" ; \ - echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ - echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \ + echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ + echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ fi - @./mkconfig -a PM828 ppc mpc8260 pm828 + @$(MKCONFIG) -a PM828 ppc mpc8260 pm828 ppmc8260_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 ppmc8260 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260 Rattler8248_config \ Rattler_config: unconfig + @mkdir -p $(obj)include $(if $(findstring 8248,$@), \ - @echo "#define CONFIG_MPC8248" > include/config.h) - @./mkconfig -a Rattler ppc mpc8260 rattler + @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) + @$(MKCONFIG) -a Rattler ppc mpc8260 rattler RPXsuper_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 rpxsuper + @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper rsdproto_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 rsdproto + @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto sacsng_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 sacsng + @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng sbc8260_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 sbc8260 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260 SCM_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 SCM siemens + @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens TQM8255_AA_config \ TQM8260_AA_config \ @@ -1320,6 +1435,7 @@ TQM8260_AG_config \ TQM8260_AH_config \ TQM8260_AI_config \ TQM8265_AA_config: unconfig + @mkdir -p $(obj)include @case "$@" in \ TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ @@ -1333,205 +1449,214 @@ TQM8265_AA_config: unconfig TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ esac; \ - >include/config.h ; \ + >$(obj)include/config.h ; \ if [ "$${CTYPE}" != "MPC8260" ] ; then \ - echo "#define CONFIG_$${CTYPE}" >>include/config.h ; \ + echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ fi; \ - echo "#define CONFIG_$${CFREQ}MHz" >>include/config.h ; \ + echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ echo "... with $${CFREQ}MHz system clock" ; \ if [ "$${CACHE}" == "yes" ] ; then \ - echo "#define CONFIG_L2_CACHE" >>include/config.h ; \ + echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ echo "... with L2 Cache support" ; \ else \ - echo "#undef CONFIG_L2_CACHE" >>include/config.h ; \ + echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ echo "... without L2 Cache support" ; \ fi; \ if [ "$${BMODE}" == "60x" ] ; then \ - echo "#define CONFIG_BUSMODE_60x" >>include/config.h ; \ + echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ echo "... with 60x Bus Mode" ; \ else \ - echo "#undef CONFIG_BUSMODE_60x" >>include/config.h ; \ + echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ echo "... without 60x Bus Mode" ; \ fi - @./mkconfig -a TQM8260 ppc mpc8260 tqm8260 + @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 VoVPN-GW_66MHz_config \ VoVPN-GW_100MHz_config: unconfig - @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h - @./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk + @mkdir -p $(obj)include + @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h + @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk ZPC1900_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 zpc1900 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900 ######################################################################### ## Coldfire ######################################################################### cobra5272_config : unconfig - @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272 + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 EB+MCF-EV123_config : unconfig - @ >include/config.h - @echo "TEXT_BASE = 0xFFE00000"|tee board/BuS/EB+MCF-EV123/textbase.mk - @./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS + @mkdir -p $(obj)include + @mkdir -p $(obj)board/BuS/EB+MCF-EV123 + @ >$(obj)include/config.h + @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk + @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS EB+MCF-EV123_internal_config : unconfig - @ >include/config.h - @echo "TEXT_BASE = 0xF0000000"|tee board/BuS/EB+MCF-EV123/textbase.mk - @./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS + @mkdir -p $(obj)include + @mkdir -p $(obj)board/BuS/EB+MCF-EV123 + @ >$(obj)include/config.h + @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk + @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS M5271EVB_config : unconfig - @./mkconfig $(@:_config=) m68k mcf52x2 m5271evb + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb M5272C3_config : unconfig - @./mkconfig $(@:_config=) m68k mcf52x2 m5272c3 + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 M5282EVB_config : unconfig - @./mkconfig $(@:_config=) m68k mcf52x2 m5282evb + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb TASREG_config : unconfig - @./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd r5200_config : unconfig - @./mkconfig $(@:_config=) m68k mcf52x2 r5200 + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200 ######################################################################### ## MPC83xx Systems ######################################################################### MPC8349ADS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349ads TQM834x_config: unconfig - @./mkconfig $(@:_config=) ppc mpc83xx tqm834x + @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x MPC8349EMDS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc83xx mpc8349emds + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds ######################################################################### ## MPC85xx Systems ######################################################################### MPC8540ADS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads + @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads MPC8540EVAL_config \ MPC8540EVAL_33_config \ MPC8540EVAL_66_config \ MPC8540EVAL_33_slave_config \ MPC8540EVAL_66_slave_config: unconfig - @echo "" >include/config.h ; \ + @mkdir -p $(obj)include + @echo "" >$(obj)include/config.h ; \ if [ "$(findstring _33_,$@)" ] ; then \ echo -n "... 33 MHz PCI" ; \ else \ - echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \ + echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ echo -n "... 66 MHz PCI" ; \ fi ; \ if [ "$(findstring _slave_,$@)" ] ; then \ - echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \ + echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ echo " slave" ; \ else \ echo " host" ; \ fi - @./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval + @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval MPC8560ADS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads + @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads MPC8541CDS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds + @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8541cds cds MPC8548CDS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds + @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8548cds cds MPC8555CDS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds + @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8555cds cds PM854_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx pm854 + @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854 PM856_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx pm856 + @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856 sbc8540_config \ sbc8540_33_config \ sbc8540_66_config: unconfig + @mkdir -p $(obj)include @if [ "$(findstring _66_,$@)" ] ; then \ - echo "#define CONFIG_PCI_66" >>include/config.h ; \ + echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ echo "... 66 MHz PCI" ; \ else \ - >include/config.h ; \ + >$(obj)include/config.h ; \ echo "... 33 MHz PCI" ; \ fi - @./mkconfig -a SBC8540 ppc mpc85xx sbc8560 + @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560 sbc8560_config \ sbc8560_33_config \ sbc8560_66_config: unconfig + @mkdir -p $(obj)include @if [ "$(findstring _66_,$@)" ] ; then \ - echo "#define CONFIG_PCI_66" >>include/config.h ; \ + echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ echo "... 66 MHz PCI" ; \ else \ - >include/config.h ; \ + >$(obj)include/config.h ; \ echo "... 33 MHz PCI" ; \ fi - @./mkconfig -a sbc8560 ppc mpc85xx sbc8560 + @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560 stxgp3_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx stxgp3 + @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 TQM8540_config \ TQM8541_config \ TQM8555_config \ TQM8560_config: unconfig + @mkdir -p $(obj)include @CTYPE=$(subst TQM,,$(@:_config=)); \ - >include/config.h ; \ + >$(obj)include/config.h ; \ echo "... TQM"$${CTYPE}; \ - echo "#define CONFIG_MPC$${CTYPE}">>include/config.h; \ - echo "#define CONFIG_TQM$${CTYPE}">>include/config.h; \ - echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>include/config.h; \ - echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>include/config.h; \ - echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>include/config.h - @./mkconfig -a TQM85xx ppc mpc85xx tqm85xx + echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ + echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \ + echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ + echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \ + echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>$(obj)include/config.h + @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx ######################################################################### ## 74xx/7xx Systems ######################################################################### AmigaOneG3SE_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI BAB7xx_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec CPCI750_config: unconfig - @./mkconfig CPCI750 ppc 74xx_7xx cpci750 esd + @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd DB64360_config: unconfig - @./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell + @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell DB64460_config: unconfig - @./mkconfig DB64460 ppc 74xx_7xx db64460 Marvell + @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell ELPPC_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec EVB64260_config \ EVB64260_750CX_config: unconfig - @./mkconfig EVB64260 ppc 74xx_7xx evb64260 + @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260 P3G4_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 PCIPPC2_config \ PCIPPC6_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2 + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 ZUMA_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 ppmc7xx_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx ppmc7xx + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx #======================================================================== # ARM @@ -1541,19 +1666,19 @@ ppmc7xx_config: unconfig ######################################################################### assabet_config : unconfig - @./mkconfig $(@:_config=) arm sa1100 assabet + @$(MKCONFIG) $(@:_config=) arm sa1100 assabet dnp1110_config : unconfig - @./mkconfig $(@:_config=) arm sa1100 dnp1110 + @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110 gcplus_config : unconfig - @./mkconfig $(@:_config=) arm sa1100 gcplus + @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus lart_config : unconfig - @./mkconfig $(@:_config=) arm sa1100 lart + @$(MKCONFIG) $(@:_config=) arm sa1100 lart shannon_config : unconfig - @./mkconfig $(@:_config=) arm sa1100 shannon + @$(MKCONFIG) $(@:_config=) arm sa1100 shannon ######################################################################### ## ARM92xT Systems @@ -1566,16 +1691,16 @@ xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$ xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) at91rm9200dk_config : unconfig - @./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200 + @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200 cmc_pu2_config : unconfig - @./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 + @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 csb637_config : unconfig - @./mkconfig $(@:_config=) arm arm920t csb637 NULL at91rm9200 + @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 mp2usb_config : unconfig - @./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200 + @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 ######################################################################## @@ -1605,34 +1730,35 @@ cp1026_config: unconfig @board/integratorcp/split_by_variant.sh $@ kb9202_config : unconfig - @./mkconfig $(@:_config=) arm arm920t kb9202 NULL at91rm9200 + @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 lpd7a400_config \ lpd7a404_config: unconfig - @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x + @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x mx1ads_config : unconfig - @./mkconfig $(@:_config=) arm arm920t mx1ads NULL imx + @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx mx1fs2_config : unconfig - @./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx + @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx netstar_32_config \ netstar_config: unconfig + @mkdir -p $(obj)include @if [ "$(findstring _32_,$@)" ] ; then \ echo "... 32MB SDRAM" ; \ - echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>include/config.h ; \ + echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>$(obj)include/config.h ; \ else \ echo "... 64MB SDRAM" ; \ - echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>include/config.h ; \ + echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>$(obj)include/config.h ; \ fi - @./mkconfig -a netstar arm arm925t netstar + @$(MKCONFIG) -a netstar arm arm925t netstar omap1510inn_config : unconfig - @./mkconfig $(@:_config=) arm arm925t omap1510inn + @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn omap5912osk_config : unconfig - @./mkconfig $(@:_config=) arm arm926ejs omap5912osk NULL omap + @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap omap1610inn_config \ omap1610inn_cs0boot_config \ @@ -1642,72 +1768,76 @@ omap1610h2_config \ omap1610h2_cs0boot_config \ omap1610h2_cs3boot_config \ omap1610h2_cs_autoboot_config: unconfig + @mkdir -p $(obj)include @if [ "$(findstring _cs0boot_, $@)" ] ; then \ - echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \ + echo "#define CONFIG_CS0_BOOT" >> .$(obj)/include/config.h ; \ echo "... configured for CS0 boot"; \ elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ - echo "#define CONFIG_CS_AUTOBOOT" >> ./include/config.h ; \ + echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)./include/config.h ; \ echo "... configured for CS_AUTO boot"; \ else \ - echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \ + echo "#define CONFIG_CS3_BOOT" >> $(obj)./include/config.h ; \ echo "... configured for CS3 boot"; \ fi; - @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap + @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap omap730p2_config \ omap730p2_cs0boot_config \ omap730p2_cs3boot_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _cs0boot_, $@)" ] ; then \ - echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \ + echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ echo "... configured for CS0 boot"; \ else \ - echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \ + echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ echo "... configured for CS3 boot"; \ fi; - @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap + @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap sbc2410x_config: unconfig - @./mkconfig $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 + @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 scb9328_config : unconfig - @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx + @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx smdk2400_config : unconfig - @./mkconfig $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 + @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 smdk2410_config : unconfig - @./mkconfig $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 + @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 SX1_config : unconfig - @./mkconfig $(@:_config=) arm arm925t sx1 + @$(MKCONFIG) $(@:_config=) arm arm925t sx1 # TRAB default configuration: 8 MB Flash, 32 MB RAM trab_config \ trab_bigram_config \ trab_bigflash_config \ trab_old_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @mkdir -p $(obj)board/trab + @ >$(obj)include/config.h @[ -z "$(findstring _bigram,$@)" ] || \ - { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \ - echo "#define CONFIG_RAM_32MB" >>include/config.h ; \ + { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ + echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ echo "... with 8 MB Flash, 32 MB RAM" ; \ } @[ -z "$(findstring _bigflash,$@)" ] || \ - { echo "#define CONFIG_FLASH_16MB" >>include/config.h ; \ - echo "#define CONFIG_RAM_16MB" >>include/config.h ; \ + { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ + echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ echo "... with 16 MB Flash, 16 MB RAM" ; \ - echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \ + echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } @[ -z "$(findstring _old,$@)" ] || \ - { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \ - echo "#define CONFIG_RAM_16MB" >>include/config.h ; \ + { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ + echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ echo "... with 8 MB Flash, 16 MB RAM" ; \ - echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \ + echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } - @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 + @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 VCMA9_config : unconfig - @./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0 + @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 #======================================================================== # ARM supplied Versatile development boards @@ -1719,117 +1849,120 @@ versatilepb_config : unconfig voiceblue_smallflash_config \ voiceblue_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/voiceblue @if [ "$(findstring _smallflash_,$@)" ] ; then \ echo "... boot from lower flash bank" ; \ - echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \ - echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \ + echo "#define VOICEBLUE_SMALL_FLASH" >>$(obj)include/config.h ; \ + echo "VOICEBLUE_SMALL_FLASH=y" >$(obj)board/voiceblue/config.tmp ; \ else \ echo "... boot from upper flash bank" ; \ - >include/config.h ; \ - echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \ + >$(obj)include/config.h ; \ + echo "VOICEBLUE_SMALL_FLASH=n" >$(obj)board/voiceblue/config.tmp ; \ fi - @./mkconfig -a voiceblue arm arm925t voiceblue + @$(MKCONFIG) -a voiceblue arm arm925t voiceblue cm4008_config : unconfig - @./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695 + @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 cm41xx_config : unconfig - @./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695 + @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 gth2_config : unconfig - @ >include/config.h - @echo "#define CONFIG_GTH2 1" >>include/config.h - @./mkconfig -a gth2 mips mips gth2 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_GTH2 1" >>$(obj)include/config.h + @$(MKCONFIG) -a gth2 mips mips gth2 ######################################################################### ## S3C44B0 Systems ######################################################################### B2_config : unconfig - @./mkconfig $(@:_config=) arm s3c44b0 B2 dave + @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave ######################################################################### ## ARM720T Systems ######################################################################### armadillo_config: unconfig - @./mkconfig $(@:_config=) arm arm720t armadillo + @$(MKCONFIG) $(@:_config=) arm arm720t armadillo ep7312_config : unconfig - @./mkconfig $(@:_config=) arm arm720t ep7312 + @$(MKCONFIG) $(@:_config=) arm arm720t ep7312 impa7_config : unconfig - @./mkconfig $(@:_config=) arm arm720t impa7 + @$(MKCONFIG) $(@:_config=) arm arm720t impa7 modnet50_config : unconfig - @./mkconfig $(@:_config=) arm arm720t modnet50 + @$(MKCONFIG) $(@:_config=) arm arm720t modnet50 evb4510_config : unconfig - @./mkconfig $(@:_config=) arm arm720t evb4510 + @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 ######################################################################### ## XScale Systems ######################################################################### adsvix_config : unconfig - @./mkconfig $(@:_config=) arm pxa adsvix + @$(MKCONFIG) $(@:_config=) arm pxa adsvix cerf250_config : unconfig - @./mkconfig $(@:_config=) arm pxa cerf250 + @$(MKCONFIG) $(@:_config=) arm pxa cerf250 cradle_config : unconfig - @./mkconfig $(@:_config=) arm pxa cradle + @$(MKCONFIG) $(@:_config=) arm pxa cradle csb226_config : unconfig - @./mkconfig $(@:_config=) arm pxa csb226 + @$(MKCONFIG) $(@:_config=) arm pxa csb226 delta_config : - @./mkconfig $(@:_config=) arm pxa delta + @$(MKCONFIG) $(@:_config=) arm pxa delta innokom_config : unconfig - @./mkconfig $(@:_config=) arm pxa innokom + @$(MKCONFIG) $(@:_config=) arm pxa innokom ixdp425_config : unconfig - @./mkconfig $(@:_config=) arm ixp ixdp425 + @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 ixdpg425_config : unconfig - @./mkconfig $(@:_config=) arm ixp ixdp425 + @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 lubbock_config : unconfig - @./mkconfig $(@:_config=) arm pxa lubbock + @$(MKCONFIG) $(@:_config=) arm pxa lubbock pleb2_config : unconfig - @./mkconfig $(@:_config=) arm pxa pleb2 + @$(MKCONFIG) $(@:_config=) arm pxa pleb2 logodl_config : unconfig - @./mkconfig $(@:_config=) arm pxa logodl + @$(MKCONFIG) $(@:_config=) arm pxa logodl pdnb3_config : unconfig - @./mkconfig $(@:_config=) arm ixp pdnb3 prodrive + @$(MKCONFIG) $(@:_config=) arm ixp pdnb3 prodrive pxa255_idp_config: unconfig - @./mkconfig $(@:_config=) arm pxa pxa255_idp + @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp wepep250_config : unconfig - @./mkconfig $(@:_config=) arm pxa wepep250 + @$(MKCONFIG) $(@:_config=) arm pxa wepep250 xaeniax_config : unconfig - @./mkconfig $(@:_config=) arm pxa xaeniax + @$(MKCONFIG) $(@:_config=) arm pxa xaeniax xm250_config : unconfig - @./mkconfig $(@:_config=) arm pxa xm250 + @$(MKCONFIG) $(@:_config=) arm pxa xm250 xsengine_config : unconfig - @./mkconfig $(@:_config=) arm pxa xsengine + @$(MKCONFIG) $(@:_config=) arm pxa xsengine zylonite_config : - @./mkconfig $(@:_config=) arm pxa zylonite + @$(MKCONFIG) $(@:_config=) arm pxa zylonite ######################################################################### ## ARM1136 Systems ######################################################################### omap2420h4_config : unconfig - @./mkconfig $(@:_config=) arm arm1136 omap2420h4 + @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 #======================================================================== # i386 @@ -1838,13 +1971,13 @@ omap2420h4_config : unconfig ## AMD SC520 CDP ######################################################################### sc520_cdp_config : unconfig - @./mkconfig $(@:_config=) i386 i386 sc520_cdp + @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp sc520_spunk_config : unconfig - @./mkconfig $(@:_config=) i386 i386 sc520_spunk + @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk sc520_spunk_rel_config : unconfig - @./mkconfig $(@:_config=) i386 i386 sc520_spunk + @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk #======================================================================== # MIPS @@ -1859,63 +1992,70 @@ incaip_100MHz_config \ incaip_133MHz_config \ incaip_150MHz_config \ incaip_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _100MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 100000000" >>include/config.h ; \ + { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ echo "... with 100MHz system clock" ; \ } @[ -z "$(findstring _133MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 133000000" >>include/config.h ; \ + { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ echo "... with 133MHz system clock" ; \ } @[ -z "$(findstring _150MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 150000000" >>include/config.h ; \ + { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ echo "... with 150MHz system clock" ; \ } - @./mkconfig -a $(call xtract_incaip,$@) mips mips incaip + @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip tb0229_config: unconfig - @./mkconfig $(@:_config=) mips mips tb0229 + @$(MKCONFIG) $(@:_config=) mips mips tb0229 ######################################################################### ## MIPS32 AU1X00 ######################################################################### dbau1000_config : unconfig - @ >include/config.h - @echo "#define CONFIG_DBAU1000 1" >>include/config.h - @./mkconfig -a dbau1x00 mips mips dbau1x00 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_DBAU1000 1" >>$(obj)include/config.h + @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 dbau1100_config : unconfig - @ >include/config.h - @echo "#define CONFIG_DBAU1100 1" >>include/config.h - @./mkconfig -a dbau1x00 mips mips dbau1x00 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_DBAU1100 1" >>$(obj)include/config.h + @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 dbau1500_config : unconfig - @ >include/config.h - @echo "#define CONFIG_DBAU1500 1" >>include/config.h - @./mkconfig -a dbau1x00 mips mips dbau1x00 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_DBAU1500 1" >>$(obj)include/config.h + @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 dbau1550_config : unconfig - @ >include/config.h - @echo "#define CONFIG_DBAU1550 1" >>include/config.h - @./mkconfig -a dbau1x00 mips mips dbau1x00 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h + @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 dbau1550_el_config : unconfig - @ >include/config.h - @echo "#define CONFIG_DBAU1550 1" >>include/config.h - @./mkconfig -a dbau1x00 mips mips dbau1x00 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h + @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 pb1000_config : unconfig - @ >include/config.h - @echo "#define CONFIG_PB1000 1" >>include/config.h - @./mkconfig -a pb1x00 mips mips pb1x00 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h + @$(MKCONFIG) -a pb1x00 mips mips pb1x00 ######################################################################### ## MIPS64 5Kc ######################################################################### purple_config : unconfig - @./mkconfig $(@:_config=) mips mips purple + @$(MKCONFIG) $(@:_config=) mips mips purple #======================================================================== # Nios @@ -1927,80 +2067,83 @@ purple_config : unconfig DK1C20_safe_32_config \ DK1C20_standard_32_config \ DK1C20_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _safe_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'safe_32' configuration" ; \ } @[ -z "$(findstring _standard_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'standard_32' configuration" ; \ } @[ -z "$(findstring DK1C20_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \ } - @./mkconfig -a DK1C20 nios nios dk1c20 altera + @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera DK1S10_safe_32_config \ DK1S10_standard_32_config \ DK1S10_mtx_ldk_20_config \ DK1S10_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _safe_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'safe_32' configuration" ; \ } @[ -z "$(findstring _standard_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'standard_32' configuration" ; \ } @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ - { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \ echo "... NIOS 'mtx_ldk_20' configuration" ; \ } @[ -z "$(findstring DK1S10_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \ } - @./mkconfig -a DK1S10 nios nios dk1s10 altera + @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera ADNPESC1_DNPEVA2_base_32_config \ ADNPESC1_base_32_config \ ADNPESC1_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _DNPEVA2,$@)" ] || \ - { echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \ + { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ echo "... DNP/EVA2 configuration" ; \ } @[ -z "$(findstring _base_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'base_32' configuration" ; \ } @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'base_32' configuration (DEFAULT)" ; \ } - @./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv + @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv ######################################################################### ## Nios-II ######################################################################### EP1C20_config : unconfig - @./mkconfig EP1C20 nios2 nios2 ep1c20 altera + @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera EP1S10_config : unconfig - @./mkconfig EP1S10 nios2 nios2 ep1s10 altera + @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera EP1S40_config : unconfig - @./mkconfig EP1S40 nios2 nios2 ep1s40 altera + @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera PK1C20_config : unconfig - @./mkconfig PK1C20 nios2 nios2 pk1c20 psyent + @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent PCI5441_config : unconfig - @./mkconfig PCI5441 nios2 nios2 pci5441 psyent + @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent #======================================================================== # MicroBlaze @@ -2009,62 +2152,70 @@ PCI5441_config : unconfig ## Microblaze ######################################################################### suzaku_config: unconfig - @ >include/config.h - @echo "#define CONFIG_SUZAKU 1" >> include/config.h - @./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_SUZAKU 1" >> $(obj)include/config.h + @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno ######################################################################### ## Blackfin ######################################################################### ezkit533_config : unconfig - @./mkconfig $(@:_config=) blackfin bf533 ezkit533 + @$(MKCONFIG) $(@:_config=) blackfin bf533 ezkit533 stamp_config : unconfig - @./mkconfig $(@:_config=) blackfin bf533 stamp + @$(MKCONFIG) $(@:_config=) blackfin bf533 stamp dspstamp_config : unconfig - @./mkconfig $(@:_config=) blackfin bf533 dsp_stamp + @$(MKCONFIG) $(@:_config=) blackfin bf533 dsp_stamp ######################################################################### ######################################################################### ######################################################################### clean: - find . -type f \ + find $(OBJTREE) -type f \ \( -name 'core' -o -name '*.bak' -o -name '*~' \ -o -name '*.o' -o -name '*.a' \) -print \ | xargs rm -f - rm -f examples/hello_world examples/timer \ - examples/eepro100_eeprom examples/sched \ - examples/mem_to_mem_idma2intr examples/82559_eeprom \ - examples/smc91111_eeprom \ - examples/test_burst - rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr - rm -f tools/mpc86x_clk tools/ncb - rm -f tools/easylogo/easylogo tools/bmp_logo - rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend - rm -f tools/env/fw_printenv tools/env/fw_setenv - rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image - rm -f board/netstar/eeprom board/netstar/crcek - rm -f board/netstar/*.srec board/netstar/*.bin - rm -f board/trab/trab_fkt board/voiceblue/eeprom - rm -f board/integratorap/u-boot.lds board/integratorcp/u-boot.lds - rm -f include/bmp_logo.h + rm -f $(obj)examples/hello_world $(obj)examples/timer \ + $(obj)examples/eepro100_eeprom $(obj)examples/sched \ + $(obj)examples/mem_to_mem_idma2intr $(obj)examples/82559_eeprom \ + $(obj)examples/smc91111_eeprom \ + $(obj)examples/test_burst + rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \ + $(obj)tools/gen_eth_addr + rm -f $(obj)tools/mpc86x_clk $(obj)tools/ncb + rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo + rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend + rm -f $(obj)tools/env/fw_printenv $(obj)tools/env/fw_setenv + rm -f $(obj)board/cray/L1/bootscript.c $(obj)board/cray/L1/bootscript.image + rm -f $(obj)board/netstar/eeprom $(obj)board/netstar/crcek $(obj)board/netstar/crcit + rm -f $(obj)board/netstar/*.srec $(obj)board/netstar/*.bin + rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom + rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds + rm -f $(obj)include/bmp_logo.h clobber: clean - find . -type f \( -name .depend \ + find $(OBJTREE) -type f \( -name .depend \ -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ -print0 \ | xargs -0 rm -f - rm -f $(OBJS) *.bak tags TAGS include/version_autogenerated.h - rm -fr *.*~ - rm -f u-boot u-boot.map u-boot.hex $(ALL) - rm -f tools/crc32.c tools/environment.c tools/env/crc32.c - rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c - rm -f include/asm/proc include/asm/arch include/asm - + rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS $(obj)include/version_autogenerated.h + rm -fr $(obj)*.*~ + rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) + rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c + rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c + rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm + +ifeq ($(OBJTREE),$(SRCTREE)) mrproper \ distclean: clobber unconfig +else +mrproper \ +distclean: clobber unconfig + rm -rf $(OBJTREE)/* +endif backup: F=`basename $(TOPDIR)` ; cd .. ; \ diff --git a/board/AtmarkTechno/suzaku/Makefile b/board/AtmarkTechno/suzaku/Makefile index 7a17067936..b42026981f 100644 --- a/board/AtmarkTechno/suzaku/Makefile +++ b/board/AtmarkTechno/suzaku/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile index 0596572d19..57363bc249 100644 --- a/board/BuS/EB+MCF-EV123/Makefile +++ b/board/BuS/EB+MCF-EV123/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o +COBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/BuS/EB+MCF-EV123/textbase.mk b/board/BuS/EB+MCF-EV123/textbase.mk index 10106f4585..ecde6ed8b4 100644 --- a/board/BuS/EB+MCF-EV123/textbase.mk +++ b/board/BuS/EB+MCF-EV123/textbase.mk @@ -1 +1 @@ -TEXT_BASE = 0xF0000000 +TEXT_BASE = 0xFFE00000 diff --git a/board/LEOX/elpt860/Makefile b/board/LEOX/elpt860/Makefile index 3e731636e0..43044943b1 100644 --- a/board/LEOX/elpt860/Makefile +++ b/board/LEOX/elpt860/Makefile @@ -4,6 +4,9 @@ # Copyright (C) 2000, 2001, 2002, 2003 # The LEOX team , http://www.leox.org # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # LEOX.org is about the development of free hardware and software resources # for system on chip. # @@ -31,18 +34,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o flash.o -OBJS = $(BOARD).o flash.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/MAI/AmigaOneG3SE/Makefile b/board/MAI/AmigaOneG3SE/Makefile index b1247fe4e8..e9204823d9 100644 --- a/board/MAI/AmigaOneG3SE/Makefile +++ b/board/MAI/AmigaOneG3SE/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,8 +22,12 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../menu) +$(shell mkdir -p $(obj)../bios_emulator) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a COBJS = $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \ via686.o i8259.o ../bios_emulator/x86interface.o \ @@ -31,26 +35,29 @@ COBJS = $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \ interrupts.o ps2kbd.o video.o usb_uhci.o enet.o \ ../menu/cmd_menu.o cmd_boota.o nvram.o -AOBJS = board_asm_init.o memio.o - -OBJS = $(COBJS) $(AOBJS) +SOBJS = board_asm_init.o memio.o EMUDIR = ../bios_emulator/scitech/src/x86emu/ EMUOBJ = $(EMUDIR)decode.o $(EMUDIR)ops2.o $(EMUDIR)fpu.o $(EMUDIR)prim_ops.o \ $(EMUDIR)ops.o $(EMUDIR)sys.o -EMUSRC = $(EMUOBJ:.o=.c) +EMUSRC = $(EMUOBJ:.o=.c) + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) +EMUOBJ := $(addprefix $(obj),$(EMUOBJ)) -$(LIB): .depend $(OBJS) $(EMUSRC) - make libx86emu.a -C ../bios_emulator/scitech/src/x86emu -f makefile.uboot CROSS_COMPILE=$(CROSS_COMPILE) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(EMUSRC) + make $(obj)libx86emu.a -C ../bios_emulator/scitech/src/x86emu -f makefile.uboot CROSS_COMPILE=$(CROSS_COMPILE) -rm $(LIB) - $(AR) crv $@ $(OBJS) $(EMUOBJ) + $(AR) crv $@ $(OBJS) $(SOBJS) $(EMUOBJ) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/Marvell/db64360/Makefile b/board/Marvell/db64360/Makefile index 768ccddbbf..a084c894ae 100644 --- a/board/Marvell/db64360/Makefile +++ b/board/Marvell/db64360/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2001 # Josh Huber , Mission Critical Linux, Inc. # @@ -22,23 +25,30 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a SOBJS = ../common/misc.o -OBJS = $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \ +COBJS = $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \ mv_eth.o ../common/ns16550.o mpsc.o ../common/i2c.o \ sdram_init.o ../common/intel_flash.o -$(LIB): .depend $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/Marvell/db64460/Makefile b/board/Marvell/db64460/Makefile index 768ccddbbf..a084c894ae 100644 --- a/board/Marvell/db64460/Makefile +++ b/board/Marvell/db64460/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2001 # Josh Huber , Mission Critical Linux, Inc. # @@ -22,23 +25,30 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a SOBJS = ../common/misc.o -OBJS = $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \ +COBJS = $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \ mv_eth.o ../common/ns16550.o mpsc.o ../common/i2c.o \ sdram_init.o ../common/intel_flash.o -$(LIB): .depend $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/RPXClassic/Makefile b/board/RPXClassic/Makefile index 93907babe0..d8832ac1b8 100644 --- a/board/RPXClassic/Makefile +++ b/board/RPXClassic/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o eccx.o +COBJS = $(BOARD).o flash.o eccx.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/RPXlite/Makefile b/board/RPXlite/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/RPXlite/Makefile +++ b/board/RPXlite/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/RPXlite_dw/Makefile b/board/RPXlite_dw/Makefile index d45702091f..e3d24b3689 100644 --- a/board/RPXlite_dw/Makefile +++ b/board/RPXlite_dw/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/RRvision/Makefile b/board/RRvision/Makefile index fdc6fd53ea..e3d24b3689 100644 --- a/board/RRvision/Makefile +++ b/board/RRvision/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/a3000/Makefile b/board/a3000/Makefile index 5fde362713..43c27e9bab 100644 --- a/board/a3000/Makefile +++ b/board/a3000/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/adder/Makefile b/board/adder/Makefile index 9123a8026d..d0223b51ff 100644 --- a/board/adder/Makefile +++ b/board/adder/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # Copyright (C) 2004 Arabella Software Ltd. # Yuli Barcohen # @@ -23,11 +26,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o -OBJS := $(BOARD).o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/adsvix/Makefile b/board/adsvix/Makefile index 24d5d062bc..0daa3838d6 100644 --- a/board/adsvix/Makefile +++ b/board/adsvix/Makefile @@ -1,6 +1,5 @@ - # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := adsvix.o pcmcia.o +COBJS := adsvix.o pcmcia.o SOBJS := lowlevel_init.o pxavoltage.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -40,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/alaska/Makefile b/board/alaska/Makefile index a4c1d2e9ac..969580e938 100644 --- a/board/alaska/Makefile +++ b/board/alaska/Makefile @@ -1,4 +1,5 @@ -# (C) Copyright 2003-2005 +# +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o flash.o -OBJS := $(BOARD).o flash.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) +$(LIB): $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -37,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/altera/dk1c20/Makefile b/board/altera/dk1c20/Makefile index 9182a4ecfe..26c724c5a1 100644 --- a/board/altera/dk1c20/Makefile +++ b/board/altera/dk1c20/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2004 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,14 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a - -OBJS := $(BOARD).o flash.o misc.o +LIB = $(obj)lib$(BOARD).a +COBJS := $(BOARD).o flash.o misc.o SOBJS = vectors.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -40,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/altera/dk1s10/Makefile b/board/altera/dk1s10/Makefile index 9182a4ecfe..26c724c5a1 100644 --- a/board/altera/dk1s10/Makefile +++ b/board/altera/dk1s10/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2004 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,14 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a - -OBJS := $(BOARD).o flash.o misc.o +LIB = $(obj)lib$(BOARD).a +COBJS := $(BOARD).o flash.o misc.o SOBJS = vectors.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -40,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/altera/ep1c20/Makefile b/board/altera/ep1c20/Makefile index a92b258339..26873b6c2c 100644 --- a/board/altera/ep1c20/Makefile +++ b/board/altera/ep1c20/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2004 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -12,7 +12,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -22,17 +22,22 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a COMOBJS := ../common/AMDLV065D.o ../common/epled.o -OBJS := $(BOARD).o $(COMOBJS) +COBJS := $(BOARD).o $(COMOBJS) -SOBJS = +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -42,9 +47,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/altera/ep1s10/Makefile b/board/altera/ep1s10/Makefile index a92b258339..26873b6c2c 100644 --- a/board/altera/ep1s10/Makefile +++ b/board/altera/ep1s10/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2004 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -12,7 +12,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -22,17 +22,22 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a COMOBJS := ../common/AMDLV065D.o ../common/epled.o -OBJS := $(BOARD).o $(COMOBJS) +COBJS := $(BOARD).o $(COMOBJS) -SOBJS = +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -42,9 +47,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/altera/ep1s40/Makefile b/board/altera/ep1s40/Makefile index a92b258339..26873b6c2c 100644 --- a/board/altera/ep1s40/Makefile +++ b/board/altera/ep1s40/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2004 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -12,7 +12,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -22,17 +22,22 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a COMOBJS := ../common/AMDLV065D.o ../common/epled.o -OBJS := $(BOARD).o $(COMOBJS) +COBJS := $(BOARD).o $(COMOBJS) -SOBJS = +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -42,9 +47,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/amcc/bamboo/Makefile b/board/amcc/bamboo/Makefile index 5654f91a83..5f3e34e246 100644 --- a/board/amcc/bamboo/Makefile +++ b/board/amcc/bamboo/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o -OBJS += flash.o +COBJS = $(BOARD).o flash.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -40,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/amcc/bubinga/Makefile b/board/amcc/bubinga/Makefile index f5bda5519a..e78ed5f926 100644 --- a/board/amcc/bubinga/Makefile +++ b/board/amcc/bubinga/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,9 +23,13 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/amcc/ebony/Makefile b/board/amcc/ebony/Makefile index 4a3927be7e..5f3e34e246 100644 --- a/board/amcc/ebony/Makefile +++ b/board/amcc/ebony/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/amcc/luan/Makefile b/board/amcc/luan/Makefile index 5654f91a83..5f3e34e246 100644 --- a/board/amcc/luan/Makefile +++ b/board/amcc/luan/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o -OBJS += flash.o +COBJS = $(BOARD).o flash.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -40,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/amcc/ocotea/Makefile b/board/amcc/ocotea/Makefile index af223d2c55..4def7fd79b 100644 --- a/board/amcc/ocotea/Makefile +++ b/board/amcc/ocotea/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/amcc/walnut/Makefile b/board/amcc/walnut/Makefile index f5bda5519a..e78ed5f926 100644 --- a/board/amcc/walnut/Makefile +++ b/board/amcc/walnut/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,9 +23,13 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/amcc/yellowstone/Makefile b/board/amcc/yellowstone/Makefile index 47116d3674..a47a0674c4 100644 --- a/board/amcc/yellowstone/Makefile +++ b/board/amcc/yellowstone/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o +COBJS = $(BOARD).o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/amcc/yosemite/Makefile b/board/amcc/yosemite/Makefile index 47116d3674..a47a0674c4 100644 --- a/board/amcc/yosemite/Makefile +++ b/board/amcc/yosemite/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o +COBJS = $(BOARD).o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/amcc/yucca/Makefile b/board/amcc/yucca/Makefile index c85fa3107b..696fd4092e 100644 --- a/board/amcc/yucca/Makefile +++ b/board/amcc/yucca/Makefile @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o cmd_yucca.o +COBJS = $(BOARD).o flash.o cmd_yucca.o SOBJS = init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/amirix/ap1000/Makefile b/board/amirix/ap1000/Makefile index 4e1ef217ca..08a17f90d7 100644 --- a/board/amirix/ap1000/Makefile +++ b/board/amirix/ap1000/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o serial.o pci.o powerspan.o +COBJS = $(BOARD).o flash.o serial.o pci.o powerspan.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/armadillo/Makefile b/board/armadillo/Makefile index 52ea7f28d4..80e1687bf6 100644 --- a/board/armadillo/Makefile +++ b/board/armadillo/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2002 # Sysgo Real-Time Solutions, GmbH # Marius Groeger @@ -24,12 +27,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := armadillo.o flash.o +COBJS := armadillo.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -40,9 +47,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/assabet/Makefile b/board/assabet/Makefile index c49f1b4604..a7414e8414 100644 --- a/board/assabet/Makefile +++ b/board/assabet/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # 2004 (c) MontaVista Software, Inc. @@ -25,12 +25,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := assabet.o +COBJS := assabet.o SOBJS := setup.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -41,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/at91rm9200dk/Makefile b/board/at91rm9200dk/Makefile index ec77da9de3..f087a0f316 100644 --- a/board/at91rm9200dk/Makefile +++ b/board/at91rm9200dk/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := at91rm9200dk.o at45.o flash.o +COBJS := at91rm9200dk.o at45.o flash.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/atc/Makefile b/board/atc/Makefile index 7573a0c771..a041c999fa 100644 --- a/board/atc/Makefile +++ b/board/atc/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ti113x.o +COBJS = $(BOARD).o flash.o ti113x.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/barco/Makefile b/board/barco/Makefile index d6bbf2f297..9ac6a4da37 100644 --- a/board/barco/Makefile +++ b/board/barco/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/bc3450/Makefile b/board/bc3450/Makefile index 4dec44fd25..122a22ae4f 100644 --- a/board/bc3450/Makefile +++ b/board/bc3450/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003-2004 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o cmd_bc3450.o +COBJS := $(BOARD).o cmd_bc3450.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/bmw/Makefile b/board/bmw/Makefile index 621640b007..b775da2a21 100644 --- a/board/bmw/Makefile +++ b/board/bmw/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2002 # James F. Dougherty, Broadcom Corporation, jfd@broadcom.com # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -24,20 +27,24 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ns16550.o serial.o m48t59y.o +COBJS = $(BOARD).o flash.o ns16550.o serial.o m48t59y.o SOBJS = early_init.o -$(LIB): .depend $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/c2mon/Makefile b/board/c2mon/Makefile index 7b2b545820..62db2f494b 100644 --- a/board/c2mon/Makefile +++ b/board/c2mon/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o pcmcia.o +COBJS = $(BOARD).o flash.o pcmcia.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/canmb/Makefile b/board/canmb/Makefile index 607833f8b0..47a3e8cf00 100644 --- a/board/canmb/Makefile +++ b/board/canmb/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2005 +# (C) Copyright 2005-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,13 +22,20 @@ # include $(TOPDIR)/config.mk +#ifneq ($(OBJTREE),$(SRCTREE)) +#$(shell mkdir -p $(obj)../common) +#endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o +COBJS := $(BOARD).o #../common/flash.o ../common/vpd.o ../common/am79c874.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -39,9 +46,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cds/mpc8541cds/Makefile b/board/cds/mpc8541cds/Makefile index 0d4abbd71d..3f3a51721a 100644 --- a/board/cds/mpc8541cds/Makefile +++ b/board/cds/mpc8541cds/Makefile @@ -1,6 +1,6 @@ # # Copyright 2004 Freescale Semiconductor. -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,16 +23,23 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o \ +COBJS := $(BOARD).o \ ../common/cadmus.o \ ../common/eeprom.o SOBJS := init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) clean: @@ -43,9 +50,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cds/mpc8548cds/Makefile b/board/cds/mpc8548cds/Makefile index 0d4abbd71d..3f3a51721a 100644 --- a/board/cds/mpc8548cds/Makefile +++ b/board/cds/mpc8548cds/Makefile @@ -1,6 +1,6 @@ # # Copyright 2004 Freescale Semiconductor. -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,16 +23,23 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o \ +COBJS := $(BOARD).o \ ../common/cadmus.o \ ../common/eeprom.o SOBJS := init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) clean: @@ -43,9 +50,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cds/mpc8555cds/Makefile b/board/cds/mpc8555cds/Makefile index 0d4abbd71d..3f3a51721a 100644 --- a/board/cds/mpc8555cds/Makefile +++ b/board/cds/mpc8555cds/Makefile @@ -1,6 +1,6 @@ # # Copyright 2004 Freescale Semiconductor. -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,16 +23,23 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o \ +COBJS := $(BOARD).o \ ../common/cadmus.o \ ../common/eeprom.o SOBJS := init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) clean: @@ -43,9 +50,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile index 83e3ba458a..52712be47a 100644 --- a/board/cerf250/Makefile +++ b/board/cerf250/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := cerf250.o flash.o +COBJS := cerf250.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cm4008/Makefile b/board/cm4008/Makefile index c66dd716c8..fb18ad804d 100644 --- a/board/cm4008/Makefile +++ b/board/cm4008/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := cm4008.o flash.o +COBJS := cm4008.o flash.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cm41xx/Makefile b/board/cm41xx/Makefile index f0d3451989..d42e2a8e74 100644 --- a/board/cm41xx/Makefile +++ b/board/cm41xx/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := cm41xx.o flash.o +COBJS := cm41xx.o flash.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cmc_pu2/Makefile b/board/cmc_pu2/Makefile index d0def05520..ccbf3087f5 100644 --- a/board/cmc_pu2/Makefile +++ b/board/cmc_pu2/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := cmc_pu2.o at45.o flash.o load_sernum_ethaddr.o +COBJS := cmc_pu2.o at45.o flash.o load_sernum_ethaddr.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cmi/Makefile b/board/cmi/Makefile index 2324d8772e..d935044a99 100644 --- a/board/cmi/Makefile +++ b/board/cmi/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2001 Wolfgang Denk, DENX Software Engineering, wd@denx.de -# +# (C) Copyright 2001-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de # # See file CREDITS for list of people who contributed to this # project. @@ -23,12 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a + +COBJS := flash.o cmi.o -OBJS := flash.o cmi.o -SOBJS := +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -39,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cobra5272/Makefile b/board/cobra5272/Makefile index e5d8446313..e3d24b3689 100644 --- a/board/cobra5272/Makefile +++ b/board/cobra5272/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cogent/Makefile b/board/cogent/Makefile index 4084c7ebe5..8498aceafe 100644 --- a/board/cogent/Makefile +++ b/board/cogent/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := mb.o flash.o dipsw.o lcd.o serial.o # pci.o rtc.o par.o kbm.o -SOBJS := +COBJS := mb.o flash.o dipsw.o lcd.o serial.o # pci.o rtc.o par.o kbm.o -$(LIB): $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -39,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cpc45/Makefile b/board/cpc45/Makefile index ccb811bd4d..346833a789 100644 --- a/board/cpc45/Makefile +++ b/board/cpc45/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2003 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o plx9030.o pd67290.o +COBJS = $(BOARD).o flash.o plx9030.o pd67290.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cpu86/Makefile b/board/cpu86/Makefile index 7a2014d466..1b57d2b023 100644 --- a/board/cpu86/Makefile +++ b/board/cpu86/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cpu87/Makefile b/board/cpu87/Makefile index 26f53ede42..1b57d2b023 100644 --- a/board/cpu87/Makefile +++ b/board/cpu87/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2005 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cradle/Makefile b/board/cradle/Makefile index 265d50043c..c6a5a0d82d 100644 --- a/board/cradle/Makefile +++ b/board/cradle/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := cradle.o flash.o +COBJS := cradle.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cray/L1/Makefile b/board/cray/L1/Makefile index bfe0922ebc..44ef9c26aa 100644 --- a/board/cray/L1/Makefile +++ b/board/cray/L1/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,35 +23,41 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o SOBJS = init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + # HACK: depend needs bootscript.c, which needs tools/mkimage, which is not # built in the depend stage. So... put bootscript.o here, not in OBJS -$(LIB): $(OBJS) $(SOBJS) bootscript.o +$(LIB): $(OBJS) $(SOBJS) $(obj)bootscript.o $(AR) crv $@ $^ clean: - rm -f $(SOBJS) $(OBJS) bootscript.c bootscript.image bootscript.o + rm -f $(SOBJS) $(OBJS) $(obj)bootscript.c \ + $(obj)bootscript.image $(obj)bootscript.o distclean: clean rm -f $(LIB) core *.bak .depend -$(BOARD).o : $(BOARD).c bootscript.o +$(obj)$(BOARD).o : $(src)$(BOARD).c $(obj)bootscript.o -bootscript.c: bootscript.image +$(obj)bootscript.c: $(obj)bootscript.image od -t x1 -v -A x $^ | awk -f x2c.awk > $@ -bootscript.image: bootscript.hush Makefile - -$(TOPDIR)/tools/mkimage -A ppc -O linux -T script -C none -a 0 -e 0 -n bootscript -d bootscript.hush $@ +$(obj)bootscript.image: $(src)bootscript.hush $(src)Makefile + -$(OBJTREE)/tools/mkimage -A ppc -O linux -T script -C none -a 0 -e 0 -n bootscript -d $(src)bootscript.hush $@ ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/csb226/Makefile b/board/csb226/Makefile index 5b311a9450..34c071e025 100644 --- a/board/csb226/Makefile +++ b/board/csb226/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := csb226.o flash.o +COBJS := csb226.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/csb272/Makefile b/board/csb272/Makefile index 926e065032..7acb7c809b 100644 --- a/board/csb272/Makefile +++ b/board/csb272/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,14 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -#OBJS = $(BOARD).o flash.o -#OBJS = $(BOARD).o strataflash.o -OBJS = $(BOARD).o +#COBJS = $(BOARD).o flash.o +#COBJS = $(BOARD).o strataflash.o +COBJS = $(BOARD).o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ @@ -43,9 +46,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/csb472/Makefile b/board/csb472/Makefile index 926e065032..7acb7c809b 100644 --- a/board/csb472/Makefile +++ b/board/csb472/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,14 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -#OBJS = $(BOARD).o flash.o -#OBJS = $(BOARD).o strataflash.o -OBJS = $(BOARD).o +#COBJS = $(BOARD).o flash.o +#COBJS = $(BOARD).o strataflash.o +COBJS = $(BOARD).o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ @@ -43,9 +46,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/csb637/Makefile b/board/csb637/Makefile index 61d5a35dd5..d766ea2eae 100644 --- a/board/csb637/Makefile +++ b/board/csb637/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := csb637.o +COBJS := csb637.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/cu824/Makefile b/board/cu824/Makefile index 7a2014d466..1b57d2b023 100644 --- a/board/cu824/Makefile +++ b/board/cu824/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/dave/B2/Makefile b/board/dave/B2/Makefile index 548fd528ba..106025da1e 100644 --- a/board/dave/B2/Makefile +++ b/board/dave/B2/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2002 # Sysgo Real-Time Solutions, GmbH # Marius Groeger @@ -24,12 +27,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := B2.o flash.o +COBJS := B2.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -40,9 +47,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/dave/PPChameleonEVB/Makefile b/board/dave/PPChameleonEVB/Makefile index 581a5802b4..e62981cf3f 100644 --- a/board/dave/PPChameleonEVB/Makefile +++ b/board/dave/PPChameleonEVB/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,9 +23,13 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o nand.o +COBJS = $(BOARD).o flash.o nand.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/dbau1x00/Makefile b/board/dbau1x00/Makefile index d9b0e2d258..13986b8fcf 100644 --- a/board/dbau1x00/Makefile +++ b/board/dbau1x00/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,19 +23,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o SOBJS = lowlevel_init.o -$(LIB): .depend $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/delta/Makefile b/board/delta/Makefile index e744eec2e0..514ca9b9b2 100644 --- a/board/delta/Makefile +++ b/board/delta/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,12 +24,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := delta.o nand.o +COBJS := delta.o nand.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -40,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/dnp1110/Makefile b/board/dnp1110/Makefile index eaa38bc3c1..367d8ae5d4 100644 --- a/board/dnp1110/Makefile +++ b/board/dnp1110/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := dnp1110.o flash.o +COBJS := dnp1110.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/eXalion/Makefile b/board/eXalion/Makefile index cfbf465bbe..0acb052307 100644 --- a/board/eXalion/Makefile +++ b/board/eXalion/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,19 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o -SOBJS = +COBJS = $(BOARD).o -$(LIB): .depend $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/eltec/bab7xx/Makefile b/board/eltec/bab7xx/Makefile index 7d8ed26b52..5c6b654c4a 100644 --- a/board/eltec/bab7xx/Makefile +++ b/board/eltec/bab7xx/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o pci.o misc.o el_srom.o dc_srom.o l2cache.o +COBJS = $(BOARD).o flash.o pci.o misc.o el_srom.o dc_srom.o l2cache.o SOBJS = asm_init.o -$(LIB): .depend $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -40,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/eltec/elppc/Makefile b/board/eltec/elppc/Makefile index 76b2cfe620..5d186d97af 100644 --- a/board/eltec/elppc/Makefile +++ b/board/eltec/elppc/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,14 +23,18 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o pci.o misc.o mpc107_i2c.o eepro100_srom.o +COBJS = $(BOARD).o flash.o pci.o misc.o mpc107_i2c.o eepro100_srom.o SOBJS = asm_init.o -$(LIB): .depend $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -40,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/eltec/mhpc/Makefile b/board/eltec/mhpc/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/eltec/mhpc/Makefile +++ b/board/eltec/mhpc/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/emk/top5200/Makefile b/board/emk/top5200/Makefile index 986608bb11..307ef4ae69 100644 --- a/board/emk/top5200/Makefile +++ b/board/emk/top5200/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,19 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o +COBJS := $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -39,9 +46,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/emk/top860/Makefile b/board/emk/top860/Makefile index a74dd2fa2b..bd923af7c9 100644 --- a/board/emk/top860/Makefile +++ b/board/emk/top860/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,19 +22,26 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o +COBJS = $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ep7312/Makefile b/board/ep7312/Makefile index c53a3c7a0d..c8c834f62e 100644 --- a/board/ep7312/Makefile +++ b/board/ep7312/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2002 # Sysgo Real-Time Solutions, GmbH # Marius Groeger @@ -24,12 +27,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := ep7312.o flash.o +COBJS := ep7312.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -40,9 +47,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ep8248/Makefile b/board/ep8248/Makefile index 8b10993194..e880f873af 100644 --- a/board/ep8248/Makefile +++ b/board/ep8248/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o +COBJS := $(BOARD).o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ep8260/Makefile b/board/ep8260/Makefile index 477e5eedeb..8744359660 100644 --- a/board/ep8260/Makefile +++ b/board/ep8260/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o mii_phy.o +COBJS = $(BOARD).o flash.o mii_phy.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ep88x/Makefile b/board/ep88x/Makefile index 9123a8026d..d0223b51ff 100644 --- a/board/ep88x/Makefile +++ b/board/ep88x/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # Copyright (C) 2004 Arabella Software Ltd. # Yuli Barcohen # @@ -23,11 +26,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o -OBJS := $(BOARD).o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/eric/Makefile b/board/eric/Makefile index f55e7e2f84..fff25ab623 100644 --- a/board/eric/Makefile +++ b/board/eric/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/adciop/Makefile b/board/esd/adciop/Makefile index 67cf29b328..699a8488ea 100644 --- a/board/esd/adciop/Makefile +++ b/board/esd/adciop/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,10 +23,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o ../common/pci.o +COBJS = $(BOARD).o flash.o ../common/misc.o ../common/pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) @@ -39,9 +46,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/apc405/Makefile b/board/esd/apc405/Makefile index 8529ec70c0..a5060d2d03 100644 --- a/board/esd/apc405/Makefile +++ b/board/esd/apc405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o strataflash.o ../common/misc.o +COBJS = $(BOARD).o strataflash.o ../common/misc.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/ar405/Makefile b/board/esd/ar405/Makefile index a60495a59a..dec52af9ca 100644 --- a/board/esd/ar405/Makefile +++ b/board/esd/ar405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o ../common/misc.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/ash405/Makefile b/board/esd/ash405/Makefile index a60495a59a..dec52af9ca 100644 --- a/board/esd/ash405/Makefile +++ b/board/esd/ash405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o ../common/misc.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/canbt/Makefile b/board/esd/canbt/Makefile index a60495a59a..dec52af9ca 100644 --- a/board/esd/canbt/Makefile +++ b/board/esd/canbt/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o ../common/misc.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/cms700/Makefile b/board/esd/cms700/Makefile index a11ee82aa2..ab9d8327c0 100644 --- a/board/esd/cms700/Makefile +++ b/board/esd/cms700/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,15 +22,22 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common/xilinx_jtag) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a # Objects for Xilinx JTAG programming (CPLD) CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ ../common/xilinx_jtag/ports.o -OBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD) +COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD) + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -43,9 +50,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/cpci2dp/Makefile b/board/esd/cpci2dp/Makefile index 88b0ae3435..72c25625b3 100644 --- a/board/esd/cpci2dp/Makefile +++ b/board/esd/cpci2dp/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o ../common/cmd_loadpci.o +COBJS = $(BOARD).o flash.o ../common/misc.o ../common/cmd_loadpci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/cpci405/Makefile b/board/esd/cpci405/Makefile index 9340a32a5f..8f254dd3bf 100644 --- a/board/esd/cpci405/Makefile +++ b/board/esd/cpci405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/cpci440/Makefile b/board/esd/cpci440/Makefile index 84d44fbf4f..b4c74fc6d1 100644 --- a/board/esd/cpci440/Makefile +++ b/board/esd/cpci440/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,12 +22,19 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o strataflash.o ../common/misc.o +COBJS = $(BOARD).o strataflash.o ../common/misc.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -39,9 +46,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/cpci5200/Makefile b/board/esd/cpci5200/Makefile index 2ca73a99e2..78ffa0f85a 100644 --- a/board/esd/cpci5200/Makefile +++ b/board/esd/cpci5200/Makefile @@ -1,6 +1,5 @@ - # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +22,25 @@ # include $(TOPDIR)/config.mk +# ifneq ($(OBJTREE),$(SRCTREE)) +# $(shell mkdir -p $(obj)../common/xilinx_jtag) +# endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a # Objects for Xilinx JTAG programming (CPLD) # CPLD = ../common/xilinx_jtag/lenval.o \ # ../common/xilinx_jtag/micro.o \ # ../common/xilinx_jtag/ports.o -# OBJS = $(BOARD).o flash.o $(CPLD) -OBJS = $(BOARD).o strataflash.o +# COBJS = $(BOARD).o flash.o $(CPLD) +COBJS = $(BOARD).o strataflash.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -45,9 +51,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/cpci5200/config.mk b/board/esd/cpci5200/config.mk index 07b5de1881..170779d6c1 100644 --- a/board/esd/cpci5200/config.mk +++ b/board/esd/cpci5200/config.mk @@ -32,7 +32,7 @@ # 0x00100000 boot from RAM (for testing only) # -sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef TEXT_BASE ## Standard: boot high diff --git a/board/esd/cpci750/Makefile b/board/esd/cpci750/Makefile index cd38b2d8d8..0dfec601ea 100644 --- a/board/esd/cpci750/Makefile +++ b/board/esd/cpci750/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2001 # Josh Huber , Mission Critical Linux, Inc. # @@ -22,23 +25,30 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../../Marvell/common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a SOBJS = misc.o -OBJS = $(BOARD).o serial.o ../../Marvell/common/memory.o pci.o \ +COBJS = $(BOARD).o serial.o ../../Marvell/common/memory.o pci.o \ mv_eth.o mpsc.o i2c.o \ sdram_init.o ide.o -$(LIB): .depend $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/cpciiser4/Makefile b/board/esd/cpciiser4/Makefile index a60495a59a..dec52af9ca 100644 --- a/board/esd/cpciiser4/Makefile +++ b/board/esd/cpciiser4/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o ../common/misc.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/dasa_sim/Makefile b/board/esd/dasa_sim/Makefile index e3b1c872b0..c74d1abfa8 100644 --- a/board/esd/dasa_sim/Makefile +++ b/board/esd/dasa_sim/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,10 +23,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o cmd_dasa_sim.o eeprom.o ../common/pci.o +COBJS = $(BOARD).o flash.o cmd_dasa_sim.o eeprom.o ../common/pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) @@ -39,9 +46,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/dp405/Makefile b/board/esd/dp405/Makefile index a11ee82aa2..ab9d8327c0 100644 --- a/board/esd/dp405/Makefile +++ b/board/esd/dp405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,15 +22,22 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common/xilinx_jtag) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a # Objects for Xilinx JTAG programming (CPLD) CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ ../common/xilinx_jtag/ports.o -OBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD) +COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD) + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -43,9 +50,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/du405/Makefile b/board/esd/du405/Makefile index 5ec4a4fd49..dec52af9ca 100644 --- a/board/esd/du405/Makefile +++ b/board/esd/du405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o ../common/misc.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/hh405/Makefile b/board/esd/hh405/Makefile index 9340a32a5f..8f254dd3bf 100644 --- a/board/esd/hh405/Makefile +++ b/board/esd/hh405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/hub405/Makefile b/board/esd/hub405/Makefile index a60495a59a..dec52af9ca 100644 --- a/board/esd/hub405/Makefile +++ b/board/esd/hub405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o ../common/misc.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/ocrtc/Makefile b/board/esd/ocrtc/Makefile index b3039c6348..1da3f7ef8b 100644 --- a/board/esd/ocrtc/Makefile +++ b/board/esd/ocrtc/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o cmd_ocrtc.o +COBJS = $(BOARD).o flash.o ../common/misc.o cmd_ocrtc.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/pci405/Makefile b/board/esd/pci405/Makefile index 6db564f86e..9ae728d9d0 100644 --- a/board/esd/pci405/Makefile +++ b/board/esd/pci405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,12 +22,19 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o cmd_pci405.o +COBJS = $(BOARD).o flash.o ../common/misc.o cmd_pci405.o SOBJS = writeibm.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) # $(AR) crv $@ $(OBJS) $(AR) crv $@ $(OBJS) $(SOBJS) @@ -40,9 +47,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/pf5200/Makefile b/board/esd/pf5200/Makefile index 603bbe283c..82358af2dc 100644 --- a/board/esd/pf5200/Makefile +++ b/board/esd/pf5200/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,25 @@ # include $(TOPDIR)/config.mk +# ifneq ($(OBJTREE),$(SRCTREE)) +# $(shell mkdir -p $(obj)../common/xilinx_jtag) +# endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a # Objects for Xilinx JTAG programming (CPLD) # CPLD = ../common/xilinx_jtag/lenval.o \ # ../common/xilinx_jtag/micro.o \ # ../common/xilinx_jtag/ports.o -# OBJS = $(BOARD).o flash.o $(CPLD) -OBJS = $(BOARD).o flash.o +# COBJS = $(BOARD).o flash.o $(CPLD) +COBJS = $(BOARD).o flash.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -45,9 +52,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/pf5200/config.mk b/board/esd/pf5200/config.mk index 07b5de1881..170779d6c1 100644 --- a/board/esd/pf5200/config.mk +++ b/board/esd/pf5200/config.mk @@ -32,7 +32,7 @@ # 0x00100000 boot from RAM (for testing only) # -sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef TEXT_BASE ## Standard: boot high diff --git a/board/esd/plu405/Makefile b/board/esd/plu405/Makefile index 9340a32a5f..8f254dd3bf 100644 --- a/board/esd/plu405/Makefile +++ b/board/esd/plu405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/pmc405/Makefile b/board/esd/pmc405/Makefile index 741e4aacdc..2775b8a635 100644 --- a/board/esd/pmc405/Makefile +++ b/board/esd/pmc405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,15 +22,22 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common/xilinx_jtag) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a # Objects for Xilinx JTAG programming (CPLD) CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ ../common/xilinx_jtag/ports.o -OBJS = $(BOARD).o ../common/misc.o ../common/cmd_loadpci.o $(CPLD) +COBJS = $(BOARD).o ../common/misc.o ../common/cmd_loadpci.o $(CPLD) + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -43,9 +50,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/tasreg/Makefile b/board/esd/tasreg/Makefile index e5d8446313..e3d24b3689 100644 --- a/board/esd/tasreg/Makefile +++ b/board/esd/tasreg/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/voh405/Makefile b/board/esd/voh405/Makefile index a60495a59a..dec52af9ca 100644 --- a/board/esd/voh405/Makefile +++ b/board/esd/voh405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o ../common/misc.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/vom405/Makefile b/board/esd/vom405/Makefile index a11ee82aa2..ab9d8327c0 100644 --- a/board/esd/vom405/Makefile +++ b/board/esd/vom405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,15 +22,22 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common/xilinx_jtag) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a # Objects for Xilinx JTAG programming (CPLD) CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ ../common/xilinx_jtag/ports.o -OBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD) +COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD) + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -43,9 +50,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esd/wuh405/Makefile b/board/esd/wuh405/Makefile index a60495a59a..dec52af9ca 100644 --- a/board/esd/wuh405/Makefile +++ b/board/esd/wuh405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,17 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o ../common/misc.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/esteem192e/Makefile b/board/esteem192e/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/esteem192e/Makefile +++ b/board/esteem192e/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/etin/debris/Makefile b/board/etin/debris/Makefile index 305a1bfeb0..17ef23dcd9 100644 --- a/board/etin/debris/Makefile +++ b/board/etin/debris/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o phantom.o +COBJS = $(BOARD).o flash.o phantom.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/etin/kvme080/Makefile b/board/etin/kvme080/Makefile index 303ccfaf34..04ecf46c13 100644 --- a/board/etin/kvme080/Makefile +++ b/board/etin/kvme080/Makefile @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o multiverse.o +COBJS = $(BOARD).o multiverse.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/etx094/Makefile b/board/etx094/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/etx094/Makefile +++ b/board/etx094/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/evb4510/Makefile b/board/evb4510/Makefile index 10850a95e4..c634f72024 100644 --- a/board/evb4510/Makefile +++ b/board/evb4510/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := evb4510.o flash.o +COBJS := evb4510.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/evb64260/Makefile b/board/evb64260/Makefile index c493d6cf9d..b28372d818 100644 --- a/board/evb64260/Makefile +++ b/board/evb64260/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2001 # Josh Huber , Mission Critical Linux, Inc. # @@ -23,22 +26,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a SOBJS = misc.o -OBJS = $(BOARD).o flash.o serial.o memory.o pci.o \ +COBJS = $(BOARD).o flash.o serial.o memory.o pci.o \ eth.o eth_addrtbl.o mpsc.o i2c.o \ sdram_init.o zuma_pbb.o intel_flash.o zuma_pbb_mbox.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): .depend $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/exbitgen/Makefile b/board/exbitgen/Makefile index 34bd4b2090..7a39592aa1 100644 --- a/board/exbitgen/Makefile +++ b/board/exbitgen/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ @@ -41,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ezkit533/Makefile b/board/ezkit533/Makefile index c9b3c9280f..70feb4acce 100644 --- a/board/ezkit533/Makefile +++ b/board/ezkit533/Makefile @@ -3,7 +3,7 @@ # # Copyright (c) 2005 blackfin.uclinux.org # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -27,18 +27,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ezkit533.o +COBJS = $(BOARD).o flash.o ezkit533.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/fads/Makefile b/board/fads/Makefile index 7fc88ee824..c0c172206d 100644 --- a/board/fads/Makefile +++ b/board/fads/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o lamp.o pcmcia.o +COBJS = $(BOARD).o flash.o lamp.o pcmcia.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/flagadm/Makefile b/board/flagadm/Makefile index 7a2014d466..1b57d2b023 100644 --- a/board/flagadm/Makefile +++ b/board/flagadm/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/funkwerk/vovpn-gw/Makefile b/board/funkwerk/vovpn-gw/Makefile index f77cc60a94..b2d1e35202 100644 --- a/board/funkwerk/vovpn-gw/Makefile +++ b/board/funkwerk/vovpn-gw/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o flash.o m88e6060.o +COBJS := $(BOARD).o flash.o m88e6060.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/g2000/Makefile b/board/g2000/Makefile index 5471d13639..9b9f033f5e 100644 --- a/board/g2000/Makefile +++ b/board/g2000/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,9 +23,13 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o strataflash.o +COBJS = $(BOARD).o strataflash.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/gcplus/Makefile b/board/gcplus/Makefile index 1954d661c3..695cd93c99 100644 --- a/board/gcplus/Makefile +++ b/board/gcplus/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # 2003 (c) MontaVista Software, Inc. @@ -25,12 +25,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := gcplus.o flash.o +COBJS := gcplus.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -41,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/gen860t/Makefile b/board/gen860t/Makefile index dd7ecf1285..9d36711826 100644 --- a/board/gen860t/Makefile +++ b/board/gen860t/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o beeper.o fpga.o ioport.o +COBJS = $(BOARD).o flash.o beeper.o fpga.o ioport.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/genietv/Makefile b/board/genietv/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/genietv/Makefile +++ b/board/genietv/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/gth/Makefile b/board/gth/Makefile index 48f74cd94d..95bf0726bf 100644 --- a/board/gth/Makefile +++ b/board/gth/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ee_access.o pcmcia.o +COBJS = $(BOARD).o flash.o ee_access.o pcmcia.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/gth2/Makefile b/board/gth2/Makefile index 8ef3a51d82..ed6a4a0526 100644 --- a/board/gth2/Makefile +++ b/board/gth2/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2005 +# (C) Copyright 2005-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,19 +23,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ee_access.o +COBJS = $(BOARD).o flash.o ee_access.o SOBJS = lowlevel_init.o -$(LIB): .depend $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/gw8260/Makefile b/board/gw8260/Makefile index 827a6ac5f4..bf5c508b64 100644 --- a/board/gw8260/Makefile +++ b/board/gw8260/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := gw8260.o flash.o +COBJS := gw8260.o flash.o SOBJS := -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/hermes/Makefile b/board/hermes/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/hermes/Makefile +++ b/board/hermes/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/hidden_dragon/Makefile b/board/hidden_dragon/Makefile index b9f1df685e..9ac6a4da37 100644 --- a/board/hidden_dragon/Makefile +++ b/board/hidden_dragon/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2005 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/hmi1001/Makefile b/board/hmi1001/Makefile index ed36ea717e..4b2bbe27d2 100644 --- a/board/hmi1001/Makefile +++ b/board/hmi1001/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003-2004 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o +COBJS := $(BOARD).o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/hymod/Makefile b/board/hymod/Makefile index b52af9a716..ff9fa90d12 100644 --- a/board/hymod/Makefile +++ b/board/hymod/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o bsp.o eeprom.o fetch.o input.o env.o +COBJS = $(BOARD).o flash.o bsp.o eeprom.o fetch.o input.o env.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/icecube/Makefile b/board/icecube/Makefile index eb5ed591a9..8e61c79bd1 100644 --- a/board/icecube/Makefile +++ b/board/icecube/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,11 +24,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o flash.o +COBJS := $(BOARD).o flash.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/icecube/config.mk b/board/icecube/config.mk index 07b5de1881..170779d6c1 100644 --- a/board/icecube/config.mk +++ b/board/icecube/config.mk @@ -32,7 +32,7 @@ # 0x00100000 boot from RAM (for testing only) # -sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef TEXT_BASE ## Standard: boot high diff --git a/board/icu862/Makefile b/board/icu862/Makefile index 7b2b545820..62db2f494b 100644 --- a/board/icu862/Makefile +++ b/board/icu862/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o pcmcia.o +COBJS = $(BOARD).o flash.o pcmcia.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ids8247/Makefile b/board/ids8247/Makefile index cfef750ec6..d4237930cb 100644 --- a/board/ids8247/Makefile +++ b/board/ids8247/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2005 # Heiko Schocher, DENX Software Engineering, # @@ -23,18 +26,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o flash.o -OBJS = $(BOARD).o flash.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/impa7/Makefile b/board/impa7/Makefile index 08543f94f2..d77db72b05 100644 --- a/board/impa7/Makefile +++ b/board/impa7/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := impa7.o flash.o +COBJS := impa7.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/incaip/Makefile b/board/incaip/Makefile index d9b0e2d258..13986b8fcf 100644 --- a/board/incaip/Makefile +++ b/board/incaip/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,19 +23,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o SOBJS = lowlevel_init.o -$(LIB): .depend $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/inka4x0/Makefile b/board/inka4x0/Makefile index bf832927ce..d00e05dce1 100644 --- a/board/inka4x0/Makefile +++ b/board/inka4x0/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003-2004 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o flash.o +COBJS := $(BOARD).o flash.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/innokom/Makefile b/board/innokom/Makefile index 73f6a74427..f4cc6cf1b8 100644 --- a/board/innokom/Makefile +++ b/board/innokom/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := innokom.o flash.o +COBJS := innokom.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/integratorap/Makefile b/board/integratorap/Makefile index 358df62519..5b3729b3bc 100644 --- a/board/integratorap/Makefile +++ b/board/integratorap/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # (C) Copyright 2004 @@ -27,13 +27,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := integratorap.o flash.o +COBJS := integratorap.o flash.o SOBJS := lowlevel_init.o memsetup.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -43,9 +47,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/integratorap/config.mk b/board/integratorap/config.mk index 25b79b3e79..e4c5c3b57a 100644 --- a/board/integratorap/config.mk +++ b/board/integratorap/config.mk @@ -3,3 +3,9 @@ # TEXT_BASE = 0x01000000 + +ifneq ($(OBJTREE),$(SRCTREE)) +# We are building u-boot in a separate directory, use generated +# .lds script from OBJTREE directory. +LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds +endif diff --git a/board/integratorap/split_by_variant.sh b/board/integratorap/split_by_variant.sh index 9f71babf35..53b0d1e340 100755 --- a/board/integratorap/split_by_variant.sh +++ b/board/integratorap/split_by_variant.sh @@ -103,14 +103,17 @@ then echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil echo " /* CM may not have TCRAM */" >> tmp.fil fi -mv tmp.fil ./include/config.h + +mkdir -p ${obj}include +mkdir -p ${obj}board/integratorap +mv tmp.fil ${obj}include/config.h # --------------------------------------------------------- # Ensure correct core object loaded first in U-Boot image # --------------------------------------------------------- -sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' board/integratorap/u-boot.lds.template > board/integratorap/u-boot.lds +sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' ${src}board/integratorap/u-boot.lds.template > ${obj}board/integratorap/u-boot.lds # --------------------------------------------------------- # Complete the configuration # --------------------------------------------------------- -./mkconfig -a integratorap arm $cpu integratorap; +$MKCONFIG -a integratorap arm $cpu integratorap; echo "Variant:: $variant with core $cpu" diff --git a/board/integratorcp/Makefile b/board/integratorcp/Makefile index 3d589fcd5a..efafeb687c 100644 --- a/board/integratorcp/Makefile +++ b/board/integratorcp/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := integratorcp.o flash.o +COBJS := integratorcp.o flash.o SOBJS := lowlevel_init.o memsetup.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/integratorcp/config.mk b/board/integratorcp/config.mk index 25b79b3e79..e4c5c3b57a 100644 --- a/board/integratorcp/config.mk +++ b/board/integratorcp/config.mk @@ -3,3 +3,9 @@ # TEXT_BASE = 0x01000000 + +ifneq ($(OBJTREE),$(SRCTREE)) +# We are building u-boot in a separate directory, use generated +# .lds script from OBJTREE directory. +LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds +endif diff --git a/board/integratorcp/split_by_variant.sh b/board/integratorcp/split_by_variant.sh index 3a354339d7..37ae517fc0 100755 --- a/board/integratorcp/split_by_variant.sh +++ b/board/integratorcp/split_by_variant.sh @@ -98,14 +98,17 @@ then echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil echo " /* CM may not have TCRAM */" >> tmp.fil fi -mv tmp.fil ./include/config.h + +mkdir -p ${obj}include +mkdir -p ${obj}board/integratorcp +mv tmp.fil ${obj}include/config.h # --------------------------------------------------------- # Ensure correct core object loaded first in U-Boot image # --------------------------------------------------------- -sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' board/integratorcp/u-boot.lds.template > board/integratorcp/u-boot.lds +sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' ${src}board/integratorcp/u-boot.lds.template > ${obj}board/integratorcp/u-boot.lds # --------------------------------------------------------- # Complete the configuration # --------------------------------------------------------- -./mkconfig -a integratorcp arm $cpu integratorcp; +$MKCONFIG -a integratorcp arm $cpu integratorcp; echo "Variant:: $variant with core $cpu" diff --git a/board/ip860/Makefile b/board/ip860/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/ip860/Makefile +++ b/board/ip860/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/iphase4539/Makefile b/board/iphase4539/Makefile index 19da5d065b..efdb1c1408 100644 --- a/board/iphase4539/Makefile +++ b/board/iphase4539/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2002 Wolfgang Grandegger # # See file CREDITS for list of people who contributed to this @@ -22,11 +25,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o flash.o -OBJS := $(BOARD).o flash.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -37,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ispan/Makefile b/board/ispan/Makefile index 9123a8026d..0c1cb0253a 100644 --- a/board/ispan/Makefile +++ b/board/ispan/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # Copyright (C) 2004 Arabella Software Ltd. # Yuli Barcohen # @@ -23,11 +26,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o +COBJS := $(BOARD).o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ivm/Makefile b/board/ivm/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/ivm/Makefile +++ b/board/ivm/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ixdp425/Makefile b/board/ixdp425/Makefile index 59d6964a4a..9568cb5959 100644 --- a/board/ixdp425/Makefile +++ b/board/ixdp425/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := ixdp425.o +COBJS := ixdp425.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ixdp425/config.mk b/board/ixdp425/config.mk index 34205864cf..d49c0e7e6d 100644 --- a/board/ixdp425/config.mk +++ b/board/ixdp425/config.mk @@ -1,4 +1,4 @@ TEXT_BASE = 0x00f80000 # include NPE ethernet driver -BOARDLIBS = cpu/ixp/npe/libnpe.a +BOARDLIBS = $(obj)cpu/ixp/npe/libnpe.a diff --git a/board/jse/Makefile b/board/jse/Makefile index 0da27b6968..be6bd315cd 100644 --- a/board/jse/Makefile +++ b/board/jse/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # Copyright 2004 Picture Elements, Inc. # Stephen Williams # @@ -20,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o sdram.o flash.o host_bridge.o +COBJS = $(BOARD).o sdram.o flash.o host_bridge.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -36,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/kb9202/Makefile b/board/kb9202/Makefile index f36d88dc3f..2adcb587ad 100644 --- a/board/kb9202/Makefile +++ b/board/kb9202/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -26,12 +26,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := kb9202.o +COBJS := kb9202.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -41,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/kup/Makefile b/board/kup/Makefile index 071f0d2ac5..eac75a36b1 100644 --- a/board/kup/Makefile +++ b/board/kup/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o kup.o +COBJS = $(BOARD).o flash.o kup.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/kup/kup4k/Makefile b/board/kup/kup4k/Makefile index 4a3954c389..409e4cdd5f 100644 --- a/board/kup/kup4k/Makefile +++ b/board/kup/kup4k/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,19 +22,26 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o +COBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/kup/kup4x/Makefile b/board/kup/kup4x/Makefile index 4a3954c389..409e4cdd5f 100644 --- a/board/kup/kup4x/Makefile +++ b/board/kup/kup4x/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,19 +22,26 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o +COBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/lantec/Makefile b/board/lantec/Makefile index 7a2014d466..1b57d2b023 100644 --- a/board/lantec/Makefile +++ b/board/lantec/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/lart/Makefile b/board/lart/Makefile index 550aa1dac3..7024c2b6ae 100644 --- a/board/lart/Makefile +++ b/board/lart/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := lart.o flash.o +COBJS := lart.o flash.o SOBJS := flashasm.o lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/logodl/Makefile b/board/logodl/Makefile index c7cde7d579..fff3a51356 100644 --- a/board/logodl/Makefile +++ b/board/logodl/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := logodl.o flash.o +COBJS := logodl.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile index ebe14df1b6..692f2d5d03 100644 --- a/board/lpd7a40x/Makefile +++ b/board/lpd7a40x/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := lpd7a40x.o flash.o +COBJS := lpd7a40x.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/lubbock/Makefile b/board/lubbock/Makefile index 106622cf58..f5626429be 100644 --- a/board/lubbock/Makefile +++ b/board/lubbock/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,12 +24,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := lubbock.o flash.o +COBJS := lubbock.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -40,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/lwmon/Makefile b/board/lwmon/Makefile index 7b2b545820..62db2f494b 100644 --- a/board/lwmon/Makefile +++ b/board/lwmon/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o pcmcia.o +COBJS = $(BOARD).o flash.o pcmcia.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/m5271evb/Makefile b/board/m5271evb/Makefile index 34de983e30..2951b96a21 100644 --- a/board/m5271evb/Makefile +++ b/board/m5271evb/Makefile @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o +COBJS = $(BOARD).o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/m5272c3/Makefile b/board/m5272c3/Makefile index e5d8446313..e3d24b3689 100644 --- a/board/m5272c3/Makefile +++ b/board/m5272c3/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/m5282evb/Makefile b/board/m5282evb/Makefile index e5d8446313..e3d24b3689 100644 --- a/board/m5282evb/Makefile +++ b/board/m5282evb/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mbx8xx/Makefile b/board/mbx8xx/Makefile index e4d10994ed..feadf24ee6 100644 --- a/board/mbx8xx/Makefile +++ b/board/mbx8xx/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o vpd.o pcmcia.o +COBJS = $(BOARD).o flash.o vpd.o pcmcia.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mcc200/Makefile b/board/mcc200/Makefile index 7fdc088e9c..4b2bbe27d2 100644 --- a/board/mcc200/Makefile +++ b/board/mcc200/Makefile @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o +COBJS := $(BOARD).o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mcc200/config.mk b/board/mcc200/config.mk index 192272334a..d0f9289fe1 100644 --- a/board/mcc200/config.mk +++ b/board/mcc200/config.mk @@ -31,7 +31,7 @@ # 0x00100000 boot from RAM (for testing only) # -sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef TEXT_BASE ## Standard: boot low diff --git a/board/ml2/Makefile b/board/ml2/Makefile index 40c60b1b34..ce5ba19493 100644 --- a/board/ml2/Makefile +++ b/board/ml2/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o serial.o +COBJS = $(BOARD).o flash.o serial.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/modnet50/Makefile b/board/modnet50/Makefile index ab2c376ff4..ae4de574ad 100644 --- a/board/modnet50/Makefile +++ b/board/modnet50/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := modnet50.o flash.o +COBJS := modnet50.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mousse/Makefile b/board/mousse/Makefile index ddc5546e7f..490ac3bf15 100644 --- a/board/mousse/Makefile +++ b/board/mousse/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,18 +24,21 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o m48t59y.o pci.o flash.o +COBJS = $(BOARD).o m48t59y.o pci.o flash.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mp2usb/Makefile b/board/mp2usb/Makefile index b6ea3cf473..c1e7ffd827 100644 --- a/board/mp2usb/Makefile +++ b/board/mp2usb/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := mp2usb.o flash.o +COBJS := mp2usb.o flash.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mpc8260ads/Makefile b/board/mpc8260ads/Makefile index cc519d1e27..e1e0a0f3a6 100644 --- a/board/mpc8260ads/Makefile +++ b/board/mpc8260ads/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,11 +24,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o flash.o +COBJS := $(BOARD).o flash.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mpc8260ads/config.mk b/board/mpc8260ads/config.mk index eb6f7c9d1f..e99e181dda 100644 --- a/board/mpc8260ads/config.mk +++ b/board/mpc8260ads/config.mk @@ -29,7 +29,7 @@ # MPC8260ADS, MPC8266ADS, and PQ2FADS-ZU/VR boards # -sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef TEXT_BASE ## Standard: boot high diff --git a/board/mpc8266ads/Makefile b/board/mpc8266ads/Makefile index cd0f40bcdf..157c969d9c 100644 --- a/board/mpc8266ads/Makefile +++ b/board/mpc8266ads/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o flash.o +COBJS := $(BOARD).o flash.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mpc8349emds/Makefile b/board/mpc8349emds/Makefile index 38bbb6732e..e699086800 100644 --- a/board/mpc8349emds/Makefile +++ b/board/mpc8349emds/Makefile @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o +COBJS := $(BOARD).o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mpc8540ads/Makefile b/board/mpc8540ads/Makefile index 5d8ea34946..3f1e8f2177 100644 --- a/board/mpc8540ads/Makefile +++ b/board/mpc8540ads/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o +COBJS := $(BOARD).o SOBJS := init.o #SOBJS := -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) clean: @@ -40,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mpc8540eval/Makefile b/board/mpc8540eval/Makefile index 6f1995e082..0a8397000a 100644 --- a/board/mpc8540eval/Makefile +++ b/board/mpc8540eval/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,14 +23,18 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o flash.o -#OBJS := $(BOARD).o flash.o $(BOARD)_slave.o +COBJS := $(BOARD).o flash.o +#COBJS := $(BOARD).o flash.o $(BOARD)_slave.o SOBJS := init.o #SOBJS := -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) clean: @@ -41,9 +45,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mpc8560ads/Makefile b/board/mpc8560ads/Makefile index 5d8ea34946..3f1e8f2177 100644 --- a/board/mpc8560ads/Makefile +++ b/board/mpc8560ads/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o +COBJS := $(BOARD).o SOBJS := init.o #SOBJS := -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) clean: @@ -40,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mpl/mip405/Makefile b/board/mpl/mip405/Makefile index 9276f64ff8..87e507e8a2 100644 --- a/board/mpl/mip405/Makefile +++ b/board/mpl/mip405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,14 +22,21 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o ../common/flash.o cmd_mip405.o ../common/pci.o \ +COBJS = $(BOARD).o ../common/flash.o cmd_mip405.o ../common/pci.o \ ../common/usb_uhci.o ../common/memtst.o ../common/common_util.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -41,9 +48,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mpl/pati/Makefile b/board/mpl/pati/Makefile index 1a9ce12117..c469e3facd 100644 --- a/board/mpl/pati/Makefile +++ b/board/mpl/pati/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2001 Wolfgang Denk, DENX Software Engineering, wd@denx.de -# +# (C) Copyright 2001-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de # # See file CREDITS for list of people who contributed to this # project. @@ -22,14 +22,20 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := pati.o ../common/flash.o ../common/memtst.o cmd_pati.o ../common/common_util.o +COBJS := pati.o ../common/flash.o ../common/memtst.o cmd_pati.o ../common/common_util.o #### cmd_pati.o -SOBJS := -$(LIB): $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -40,9 +46,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mpl/pip405/Makefile b/board/mpl/pip405/Makefile index a818d08a59..833900d1d7 100644 --- a/board/mpl/pip405/Makefile +++ b/board/mpl/pip405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,10 +22,13 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o \ +COBJS = $(BOARD).o \ ../common/flash.o cmd_pip405.o ../common/pci.o \ ../common/isa.o ../common/kbd.o \ ../common/usb_uhci.o \ @@ -33,6 +36,10 @@ OBJS = $(BOARD).o \ SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -44,9 +51,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mpl/vcma9/Makefile b/board/mpl/vcma9/Makefile index 304c965d12..bd76e7475c 100644 --- a/board/mpl/vcma9/Makefile +++ b/board/mpl/vcma9/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,15 +22,22 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := vcma9.o flash.o cmd_vcma9.o -OBJS += ../common/common_util.o ../common/memtst.o +COBJS := vcma9.o flash.o cmd_vcma9.o +COBJS += ../common/common_util.o ../common/memtst.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -41,9 +48,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/musenki/Makefile b/board/musenki/Makefile index 24dc0264f3..1b57d2b023 100644 --- a/board/musenki/Makefile +++ b/board/musenki/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,19 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o -SOBJS = +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mvblue/Makefile b/board/mvblue/Makefile index 24dc0264f3..1b57d2b023 100644 --- a/board/mvblue/Makefile +++ b/board/mvblue/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,19 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o -SOBJS = +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mvs1/Makefile b/board/mvs1/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/mvs1/Makefile +++ b/board/mvs1/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile index 3e805feb40..96e5be5053 100644 --- a/board/mx1ads/Makefile +++ b/board/mx1ads/Makefile @@ -1,6 +1,9 @@ # # board/mx1ads/Makefile # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (c) Copyright 2004 # Techware Information Technology, Inc. # http://www.techware.com.tw/ @@ -24,12 +27,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := mx1ads.o syncflash.o +COBJS := mx1ads.o syncflash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -40,9 +47,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile index 9e3bca14cd..2a17f82072 100644 --- a/board/mx1fs2/Makefile +++ b/board/mx1fs2/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := mx1fs2.o flash.o +COBJS := mx1fs2.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/nc650/Makefile b/board/nc650/Makefile index 8dc4934f79..f0447272fa 100644 --- a/board/nc650/Makefile +++ b/board/nc650/Makefile @@ -1,6 +1,6 @@ # # (C) Copyright 2006 Detlev Zundel, dzu@denx.de -# (C) Copyright 2004 +# (C) Copyright 2004-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,18 +24,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o nand.o flash.o +COBJS = $(BOARD).o nand.o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/nc650/config.mk b/board/nc650/config.mk index 5b2284aec4..52c8ffe353 100644 --- a/board/nc650/config.mk +++ b/board/nc650/config.mk @@ -27,4 +27,4 @@ # TEXT_BASE = 0x40700000 -BOARDLIBS = drivers/nand/libnand.a +BOARDLIBS = $(obj)drivers/nand/libnand.a diff --git a/board/netphone/Makefile b/board/netphone/Makefile index b3c1797e22..a8b215982a 100644 --- a/board/netphone/Makefile +++ b/board/netphone/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o phone_console.o +COBJS = $(BOARD).o flash.o phone_console.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/netstar/Makefile b/board/netstar/Makefile index 3a205017f2..b7c092d24f 100644 --- a/board/netstar/Makefile +++ b/board/netstar/Makefile @@ -1,3 +1,6 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # (C) Copyright 2005 # Ladislav Michl, 2N Telekomunikace, michl@2n.cz @@ -23,63 +26,71 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := netstar.o flash.o nand.o +COBJS := netstar.o flash.o nand.o SOBJS := setup.o crcek.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) eeprom.c \ + eeprom_start.S +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) LOAD_ADDR = 0x10400000 LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/eeprom.lds +lnk = $(if $(obj),$(obj),.) HOST_CFLAGS = -Wall -pedantic -I$(TOPDIR)/include -all: $(LIB) eeprom.srec eeprom.bin crcek.srec crcek.bin crcit +all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin \ + $(obj)crcek.srec $(obj)crcek.bin $(obj)crcit $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ -eeprom.srec: eeprom.o eeprom_start.o - $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \ - -o $(<:.o=) -e $(<:.o=) $^ \ - -L../../examples -lstubs \ - -L../../lib_generic -lgeneric \ +$(obj)eeprom.srec: $(obj)eeprom.o $(obj)eeprom_start.o + cd $(lnk) && $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \ + -o $(<:.o=) -e eeprom eeprom.o eeprom_start.o \ + -L$(obj)../../examples -lstubs \ + -L$(obj)../../lib_generic -lgeneric \ -L$(gcclibdir) -lgcc $(OBJCOPY) -O srec $(<:.o=) $@ -eeprom.bin: eeprom.srec +$(obj)eeprom.bin: $(obj)eeprom.srec $(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null -crcek.srec: crcek.o +$(obj)crcek.srec: $(obj)crcek.o $(LD) -g -Ttext 0x00000000 \ - -o $(<:.o=) -e $(<:.o=) $^ + -o $(<:.o=) -e crcek $^ $(OBJCOPY) -O srec $(<:.o=) $@ -crcek.bin: crcek.srec +$(obj)crcek.bin: $(obj)crcek.srec $(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null -crcit: crcit.o crc32.o +$(obj)crcit: $(obj)crcit.o $(obj)crc32.o $(HOSTCC) $(HOST_CFLAGS) -o $@ $^ -crcit.o: crcit.c - $(HOSTCC) $(HOST_CFLAGS) -c $< +$(obj)crcit.o: crcit.c + $(HOSTCC) $(HOST_CFLAGS) -o $@ -c $< -crc32.o: $(TOPDIR)/tools/crc32.c - $(HOSTCC) $(HOST_CFLAGS) -DUSE_HOSTCC -c $< +$(obj)crc32.o: $(OBJTREE)/tools/crc32.c + $(HOSTCC) $(HOST_CFLAGS) -DUSE_HOSTCC -o $@ -c $< clean: - rm -f $(SOBJS) $(OBJS) eeprom eeprom.srec eeprom.bin \ - crcek crcek.srec crcek.bin + rm -f $(SOBJS) $(OBJS) $(obj)eeprom $(obj)eeprom.srec \ + $(obj)eeprom.bin $(obj)crcek $(obj)crcek.srec \ + $(obj)crcek.bin distclean: clean rm -f $(LIB) core *.bak .depend ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/netta/Makefile b/board/netta/Makefile index ee200c2d2d..39362c68d5 100644 --- a/board/netta/Makefile +++ b/board/netta/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o dsp.o codec.o pcmcia.o +COBJS = $(BOARD).o flash.o dsp.o codec.o pcmcia.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/netta2/Makefile b/board/netta2/Makefile index d45702091f..e3d24b3689 100644 --- a/board/netta2/Makefile +++ b/board/netta2/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/netvia/Makefile b/board/netvia/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/netvia/Makefile +++ b/board/netvia/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ns9750dev/Makefile b/board/ns9750dev/Makefile index fb4333c19c..defc29bb6f 100644 --- a/board/ns9750dev/Makefile +++ b/board/ns9750dev/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := ns9750dev.o flash.o led.o +COBJS := ns9750dev.o flash.o led.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/nx823/Makefile b/board/nx823/Makefile index 7a2014d466..1b57d2b023 100644 --- a/board/nx823/Makefile +++ b/board/nx823/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/o2dnt/Makefile b/board/o2dnt/Makefile index 2eb4366bf7..626f610269 100644 --- a/board/o2dnt/Makefile +++ b/board/o2dnt/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2005 +# (C) Copyright 2005-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,11 +24,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o flash.o +COBJS := $(BOARD).o flash.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/omap1510inn/Makefile b/board/omap1510inn/Makefile index 902b24ea1a..7cdc8d0073 100644 --- a/board/omap1510inn/Makefile +++ b/board/omap1510inn/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := omap1510innovator.o +COBJS := omap1510innovator.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/omap1610inn/Makefile b/board/omap1610inn/Makefile index 4560102327..e523dc6308 100644 --- a/board/omap1610inn/Makefile +++ b/board/omap1610inn/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := omap1610innovator.o flash.o +COBJS := omap1610innovator.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/omap2420h4/Makefile b/board/omap2420h4/Makefile index ed4786879a..767a9d6f0f 100644 --- a/board/omap2420h4/Makefile +++ b/board/omap2420h4/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := omap2420h4.o mem.o sys_info.o +COBJS := omap2420h4.o mem.o sys_info.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/omap5912osk/Makefile b/board/omap5912osk/Makefile index 4b564217b7..c734b43186 100644 --- a/board/omap5912osk/Makefile +++ b/board/omap5912osk/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := omap5912osk.o +COBJS := omap5912osk.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/omap730p2/Makefile b/board/omap730p2/Makefile index 29467ac39e..d678fd5a89 100644 --- a/board/omap730p2/Makefile +++ b/board/omap730p2/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := omap730p2.o flash.o +COBJS := omap730p2.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/oxc/Makefile b/board/oxc/Makefile index ae7a932084..e3d24b3689 100644 --- a/board/oxc/Makefile +++ b/board/oxc/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/pb1x00/Makefile b/board/pb1x00/Makefile index d1cdc6b924..d1e9ad349b 100644 --- a/board/pb1x00/Makefile +++ b/board/pb1x00/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,19 +23,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o SOBJS = memsetup.o -$(LIB): .depend $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/pcippc2/Makefile b/board/pcippc2/Makefile index 2998f23eb0..2af328612a 100644 --- a/board/pcippc2/Makefile +++ b/board/pcippc2/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,23 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a COBJS = $(BOARD).o cpc710_pci.o flash.o sconsole.o \ fpga_serial.o pcippc2_fpga.o cpc710_init_ram.o i2c.o -AOBJS = +SOBJS = -OBJS = $(COBJS) $(AOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): .depend $(OBJS) - $(AR) crv $@ $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/pcs440ep/Makefile b/board/pcs440ep/Makefile index 4a2a3888f5..9da90c1650 100644 --- a/board/pcs440ep/Makefile +++ b/board/pcs440ep/Makefile @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/pleb2/Makefile b/board/pleb2/Makefile index 95d9170b24..07997725b2 100644 --- a/board/pleb2/Makefile +++ b/board/pleb2/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,12 +24,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := pleb2.o flash.o +COBJS := pleb2.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -40,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/pm520/Makefile b/board/pm520/Makefile index 8cf0d7de7b..8e61c79bd1 100644 --- a/board/pm520/Makefile +++ b/board/pm520/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2003-2004 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,11 +24,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o flash.o +COBJS := $(BOARD).o flash.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/pm826/Makefile b/board/pm826/Makefile index 7a2014d466..1b57d2b023 100644 --- a/board/pm826/Makefile +++ b/board/pm826/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/pm826/config.mk b/board/pm826/config.mk index c93bad98e5..48ac299fae 100644 --- a/board/pm826/config.mk +++ b/board/pm826/config.mk @@ -26,7 +26,7 @@ # -sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef TEXT_BASE ## Standard: boot 64-bit flash diff --git a/board/pm828/Makefile b/board/pm828/Makefile index b9ef0c050f..1b57d2b023 100644 --- a/board/pm828/Makefile +++ b/board/pm828/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2004 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/pm828/config.mk b/board/pm828/config.mk index e894af775f..6288431a53 100644 --- a/board/pm828/config.mk +++ b/board/pm828/config.mk @@ -26,7 +26,7 @@ # -sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef TEXT_BASE ## Standard: boot 64-bit flash diff --git a/board/pm854/Makefile b/board/pm854/Makefile index 78281660d6..3f1e8f2177 100644 --- a/board/pm854/Makefile +++ b/board/pm854/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2005 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o +COBJS := $(BOARD).o SOBJS := init.o #SOBJS := -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) clean: @@ -40,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/pm856/Makefile b/board/pm856/Makefile index 5d8ea34946..3f1e8f2177 100644 --- a/board/pm856/Makefile +++ b/board/pm856/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o +COBJS := $(BOARD).o SOBJS := init.o #SOBJS := -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) clean: @@ -40,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/pn62/Makefile b/board/pn62/Makefile index e85d4fdc65..a837820493 100644 --- a/board/pn62/Makefile +++ b/board/pn62/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o cmd_pn62.o misc.o +COBJS = $(BOARD).o cmd_pn62.o misc.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ppmc7xx/Makefile b/board/ppmc7xx/Makefile index c378677cc6..1655b3e9ee 100644 --- a/board/ppmc7xx/Makefile +++ b/board/ppmc7xx/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := ppmc7xx.o pci.o flash.o SOBJS := init.o -$(LIB): .depend $(OBJS) $(SOBJS) +COBJS := ppmc7xx.o pci.o flash.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ppmc8260/Makefile b/board/ppmc8260/Makefile index 351f4eea2f..e17cb7a4e2 100644 --- a/board/ppmc8260/Makefile +++ b/board/ppmc8260/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := ppmc8260.o +COBJS := ppmc8260.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/prodrive/p3p440/Makefile b/board/prodrive/p3p440/Makefile index 47116d3674..a47a0674c4 100644 --- a/board/prodrive/p3p440/Makefile +++ b/board/prodrive/p3p440/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o +COBJS = $(BOARD).o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/prodrive/pdnb3/Makefile b/board/prodrive/pdnb3/Makefile index f3cd5a3f18..32ffac0dcf 100644 --- a/board/prodrive/pdnb3/Makefile +++ b/board/prodrive/pdnb3/Makefile @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := flash.o pdnb3.o nand.o +COBJS := flash.o pdnb3.o nand.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/prodrive/pdnb3/config.mk b/board/prodrive/pdnb3/config.mk index 6b0f18b305..767075884a 100644 --- a/board/prodrive/pdnb3/config.mk +++ b/board/prodrive/pdnb3/config.mk @@ -1,4 +1,4 @@ TEXT_BASE = 0x01f00000 # include NPE ethernet driver -BOARDLIBS = cpu/ixp/npe/libnpe.a +BOARDLIBS = $(obj)cpu/ixp/npe/libnpe.a diff --git a/board/psyent/pci5441/Makefile b/board/psyent/pci5441/Makefile index 8e55c9bcde..7d74b4ee9d 100644 --- a/board/psyent/pci5441/Makefile +++ b/board/psyent/pci5441/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2004 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -12,7 +12,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -22,17 +22,22 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a COMOBJS := ../common/AMDLV065D.o -OBJS := $(BOARD).o $(COMOBJS) +COBJS := $(BOARD).o $(COMOBJS) -SOBJS = +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -42,9 +47,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/psyent/pk1c20/Makefile b/board/psyent/pk1c20/Makefile index 5c1db036bf..cbe99190ee 100644 --- a/board/psyent/pk1c20/Makefile +++ b/board/psyent/pk1c20/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2004 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -12,7 +12,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -22,17 +22,22 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a COMOBJS := ../common/AMDLV065D.o -OBJS := $(BOARD).o led.o $(COMOBJS) +COBJS := $(BOARD).o led.o $(COMOBJS) -SOBJS = +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -42,9 +47,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/purple/Makefile b/board/purple/Makefile index b2f2fc0fd3..1262d80de9 100644 --- a/board/purple/Makefile +++ b/board/purple/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,19 +24,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o sconsole.o +COBJS = $(BOARD).o flash.o sconsole.o SOBJS = lowlevel_init.o -$(LIB): .depend $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/pxa255_idp/Makefile b/board/pxa255_idp/Makefile index b5f352a6f6..2d0077bbee 100644 --- a/board/pxa255_idp/Makefile +++ b/board/pxa255_idp/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2000-2005 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,12 +24,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := pxa_idp.o +COBJS := pxa_idp.o SOBJS := memsetup.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -40,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/quantum/Makefile b/board/quantum/Makefile index e50f5ff088..602865f5d8 100644 --- a/board/quantum/Makefile +++ b/board/quantum/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,19 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o fpga.o +COBJS = $(BOARD).o fpga.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/r360mpi/Makefile b/board/r360mpi/Makefile index 1a7e7a693a..0179b46cbf 100644 --- a/board/r360mpi/Makefile +++ b/board/r360mpi/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o pcmcia.o +COBJS = $(BOARD).o flash.o pcmcia.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/r5200/Makefile b/board/r5200/Makefile index d0364ed85f..2951b96a21 100644 --- a/board/r5200/Makefile +++ b/board/r5200/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o +COBJS = $(BOARD).o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/rattler/Makefile b/board/rattler/Makefile index 52f0fd6ef2..e880f873af 100644 --- a/board/rattler/Makefile +++ b/board/rattler/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2005 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o +COBJS := $(BOARD).o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/rbc823/Makefile b/board/rbc823/Makefile index 0121ddc79c..f004881a02 100644 --- a/board/rbc823/Makefile +++ b/board/rbc823/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o kbd.o +COBJS = $(BOARD).o flash.o kbd.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/rmu/Makefile b/board/rmu/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/rmu/Makefile +++ b/board/rmu/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/rpxsuper/Makefile b/board/rpxsuper/Makefile index 4535106e6c..2689c6bbed 100644 --- a/board/rpxsuper/Makefile +++ b/board/rpxsuper/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := rpxsuper.o flash.o mii_phy.o +COBJS := rpxsuper.o flash.o mii_phy.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/rsdproto/Makefile b/board/rsdproto/Makefile index 9934787e47..4a7bd3dce9 100644 --- a/board/rsdproto/Makefile +++ b/board/rsdproto/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,25 +23,29 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := rsdproto.o flash.o +COBJS := rsdproto.o flash.o SOBJS := flash_asm.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) distclean: clean - rm -f $(LIB) core *.bak .depend + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sacsng/Makefile b/board/sacsng/Makefile index baefa4a747..2dff242aef 100644 --- a/board/sacsng/Makefile +++ b/board/sacsng/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := sacsng.o flash.o clkinit.o +COBJS := sacsng.o flash.o clkinit.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sandburst/karef/Makefile b/board/sandburst/karef/Makefile index 8b3173ca1e..60d557352e 100644 --- a/board/sandburst/karef/Makefile +++ b/board/sandburst/karef/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2005 # Sandburst Corporation # Travis B. Sawyer @@ -23,6 +26,9 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif # TBS: add for debugging purposes BUILDUSER := $(shell whoami) @@ -32,13 +38,16 @@ CFLAGS += -DBUILDUSER='"$(BUILDUSER)"' # TBS: end debugging -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \ +COBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \ ../common/sb_common.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -51,9 +60,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sandburst/metrobox/Makefile b/board/sandburst/metrobox/Makefile index 06a9a22b6a..9579512aac 100644 --- a/board/sandburst/metrobox/Makefile +++ b/board/sandburst/metrobox/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2005 # Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com # @@ -22,6 +25,9 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif # TBS: add for debugging purposes BUILDUSER := $(shell whoami) @@ -31,12 +37,15 @@ CFLAGS += -DBUILDUSER='"$(BUILDUSER)"' # TBS: end debugging -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \ +COBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \ ../common/sb_common.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -49,9 +58,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sandpoint/Makefile b/board/sandpoint/Makefile index d6bbf2f297..e3d24b3689 100644 --- a/board/sandpoint/Makefile +++ b/board/sandpoint/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sbc2410x/Makefile b/board/sbc2410x/Makefile index ae8665ec37..908b5ffd07 100644 --- a/board/sbc2410x/Makefile +++ b/board/sbc2410x/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := sbc2410x.o flash.o +COBJS := sbc2410x.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sbc405/Makefile b/board/sbc405/Makefile index c4198c4fc9..9b9f033f5e 100644 --- a/board/sbc405/Makefile +++ b/board/sbc405/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,9 +23,13 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o strataflash.o +COBJS = $(BOARD).o strataflash.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sbc8240/Makefile b/board/sbc8240/Makefile index 7a2014d466..1b57d2b023 100644 --- a/board/sbc8240/Makefile +++ b/board/sbc8240/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sbc8260/Makefile b/board/sbc8260/Makefile index 14ed457110..7077a823c0 100644 --- a/board/sbc8260/Makefile +++ b/board/sbc8260/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := sbc8260.o flash.o +COBJS := sbc8260.o flash.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sbc8560/Makefile b/board/sbc8560/Makefile index da295fbdf8..4d9c2e7c8c 100644 --- a/board/sbc8560/Makefile +++ b/board/sbc8560/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2004 +# (C) Copyright 2004-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # (C) Copyright 2004 Wind River Systems Inc . @@ -26,13 +26,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o +COBJS := $(BOARD).o SOBJS := init.o #SOBJS := -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) clean: @@ -43,9 +47,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sc520_cdp/Makefile b/board/sc520_cdp/Makefile index ab06ebc81a..7555b4f67f 100644 --- a/board/sc520_cdp/Makefile +++ b/board/sc520_cdp/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2002 # Daniel Engström, Omicron Ceti AB, daniel@omicron.se. # @@ -23,12 +26,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := sc520_cdp.o flash.o +COBJS := sc520_cdp.o flash.o SOBJS := sc520_cdp_asm.o sc520_cdp_asm16.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +46,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sc520_spunk/Makefile b/board/sc520_spunk/Makefile index 242d53c42a..9958e80268 100644 --- a/board/sc520_spunk/Makefile +++ b/board/sc520_spunk/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2002 # Daniel Engström, Omicron Ceti AB, daniel@omicron.se. # @@ -23,12 +26,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := sc520_spunk.o flash.o +COBJS := sc520_spunk.o flash.o SOBJS := sc520_spunk_asm.o sc520_spunk_asm16.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) clean: @@ -39,9 +46,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/scb9328/Makefile b/board/scb9328/Makefile index 5dc3fd4e47..01b908e936 100644 --- a/board/scb9328/Makefile +++ b/board/scb9328/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := scb9328.o flash.o +COBJS := scb9328.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/shannon/Makefile b/board/shannon/Makefile index f66b096a4f..a04d841ef4 100644 --- a/board/shannon/Makefile +++ b/board/shannon/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := shannon.o flash.o +COBJS := shannon.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/siemens/CCM/Makefile b/board/siemens/CCM/Makefile index ee2fc53bb0..2ad4c83a9c 100644 --- a/board/siemens/CCM/Makefile +++ b/board/siemens/CCM/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,20 +22,28 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +$(shell mkdir -p $(obj)../../tqm8xx) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = ccm.o flash.o fpga_ccm.o ../common/fpga.o \ +COBJS = ccm.o flash.o fpga_ccm.o ../common/fpga.o \ ../../tqm8xx/load_sernum_ethaddr.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/siemens/IAD210/Makefile b/board/siemens/IAD210/Makefile index 87a6893720..39643810a3 100644 --- a/board/siemens/IAD210/Makefile +++ b/board/siemens/IAD210/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o atm.o +COBJS = $(BOARD).o flash.o atm.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/siemens/SCM/Makefile b/board/siemens/SCM/Makefile index af646e4eb9..b4bbb533fe 100644 --- a/board/siemens/SCM/Makefile +++ b/board/siemens/SCM/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,21 +22,28 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +$(shell mkdir -p $(obj)../../tqm8xx/) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = scm.o flash.o fpga_scm.o ../common/fpga.o \ +COBJS = scm.o flash.o fpga_scm.o ../common/fpga.o \ ../../tqm8xx/load_sernum_ethaddr.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/siemens/pcu_e/Makefile b/board/siemens/pcu_e/Makefile index 7a2014d466..1b57d2b023 100644 --- a/board/siemens/pcu_e/Makefile +++ b/board/siemens/pcu_e/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sixnet/Makefile b/board/sixnet/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/sixnet/Makefile +++ b/board/sixnet/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sl8245/Makefile b/board/sl8245/Makefile index 6d11240432..43c27e9bab 100644 --- a/board/sl8245/Makefile +++ b/board/sl8245/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 - 2003 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/smdk2400/Makefile b/board/smdk2400/Makefile index fc3d48faee..b3cefcf9c9 100644 --- a/board/smdk2400/Makefile +++ b/board/smdk2400/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := smdk2400.o flash.o +COBJS := smdk2400.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/smdk2410/Makefile b/board/smdk2410/Makefile index 4ee21f5977..65f1a4ddec 100644 --- a/board/smdk2410/Makefile +++ b/board/smdk2410/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := smdk2410.o flash.o +COBJS := smdk2410.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/snmc/qs850/Makefile b/board/snmc/qs850/Makefile index e5d8446313..e3d24b3689 100644 --- a/board/snmc/qs850/Makefile +++ b/board/snmc/qs850/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/snmc/qs860t/Makefile b/board/snmc/qs860t/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/snmc/qs860t/Makefile +++ b/board/snmc/qs860t/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sorcery/Makefile b/board/sorcery/Makefile index 3d6d673792..c59a3be72a 100644 --- a/board/sorcery/Makefile +++ b/board/sorcery/Makefile @@ -1,4 +1,5 @@ -# (C) Copyright 2005 +# +# (C) Copyright 2005-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o -OBJS := $(BOARD).o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) +$(LIB): $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -37,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/spc1920/Makefile b/board/spc1920/Makefile index 47afef7e6a..2951b96a21 100644 --- a/board/spc1920/Makefile +++ b/board/spc1920/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o +COBJS = $(BOARD).o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/spd8xx/Makefile b/board/spd8xx/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/spd8xx/Makefile +++ b/board/spd8xx/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/ssv/adnpesc1/Makefile b/board/ssv/adnpesc1/Makefile index 9182a4ecfe..77de4fbf8b 100644 --- a/board/ssv/adnpesc1/Makefile +++ b/board/ssv/adnpesc1/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2004 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,14 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o flash.o misc.o +COBJS := $(BOARD).o flash.o misc.o +SOBJS := vectors.o -SOBJS = vectors.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -40,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/stamp/Makefile b/board/stamp/Makefile index ab97e1b484..8c20543ced 100644 --- a/board/stamp/Makefile +++ b/board/stamp/Makefile @@ -3,7 +3,7 @@ # # Copyright (c) 2005 blackfin.uclinux.org # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -26,7 +26,7 @@ # # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -50,19 +50,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o stamp.o -SOBJS = +COBJS = $(BOARD).o stamp.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/stxgp3/Makefile b/board/stxgp3/Makefile index d150df831c..5477ff90f5 100644 --- a/board/stxgp3/Makefile +++ b/board/stxgp3/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o flash.o +COBJS := $(BOARD).o flash.o SOBJS := init.o #SOBJS := -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) clean: @@ -40,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/stxxtc/Makefile b/board/stxxtc/Makefile index 11065cfd2c..807da06e6c 100644 --- a/board/stxxtc/Makefile +++ b/board/stxxtc/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,26 +23,30 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o oftree.o +COBJS = $(BOARD).o oftree.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) -%.dtb: %.dts +$(obj)%.dtb: $(src)%.dts dtc -f -V 0x10 -I dts -O dtb $< >$@ -%.c: %.dtb +$(obj)%.c: $(obj)%.dtb xxd -i $< \ | sed -e "s/^unsigned char/const unsigned char/g" \ | sed -e "s/^unsigned int/const unsigned int/g" > $@ ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/svm_sc8xx/Makefile b/board/svm_sc8xx/Makefile index 13ce9fc9d2..e3d24b3689 100644 --- a/board/svm_sc8xx/Makefile +++ b/board/svm_sc8xx/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/sx1/Makefile b/board/sx1/Makefile index 8fbdf2a5e3..4e6adac56c 100644 --- a/board/sx1/Makefile +++ b/board/sx1/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2004 +# (C) Copyright 2004-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := sx1.o +COBJS := sx1.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/tb0229/Makefile b/board/tb0229/Makefile index 4375073af9..aefaf0da8d 100644 --- a/board/tb0229/Makefile +++ b/board/tb0229/Makefile @@ -1,7 +1,7 @@ # # (C) Masami Komiya 2004 # -# (C) Copyright 2003-2004 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,19 +25,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o vr4131-pci.o +COBJS = $(BOARD).o flash.o vr4131-pci.o SOBJS = lowlevel_init.o -$(LIB): .depend $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/total5200/Makefile b/board/total5200/Makefile index 232956a392..4245f98223 100644 --- a/board/total5200/Makefile +++ b/board/total5200/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003-2004 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o sdram.o +COBJS := $(BOARD).o sdram.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/total5200/config.mk b/board/total5200/config.mk index 1a7a7cfc1d..e7ac93d241 100644 --- a/board/total5200/config.mk +++ b/board/total5200/config.mk @@ -31,7 +31,7 @@ # 0x00100000 boot from RAM (for testing only) # -sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef TEXT_BASE ## Standard: boot high diff --git a/board/tqm5200/Makefile b/board/tqm5200/Makefile index 9a1ea4873e..d0dde2657c 100644 --- a/board/tqm5200/Makefile +++ b/board/tqm5200/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003-2004 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o cmd_stk52xx.o cmd_tb5200.o +COBJS := $(BOARD).o cmd_stk52xx.o cmd_tb5200.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/tqm5200/config.mk b/board/tqm5200/config.mk index 84ddee80d9..d72dfe7481 100644 --- a/board/tqm5200/config.mk +++ b/board/tqm5200/config.mk @@ -32,7 +32,7 @@ # 0x00100000 boot from RAM (for testing only) # -sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef TEXT_BASE ## Standard: boot low diff --git a/board/tqm8260/Makefile b/board/tqm8260/Makefile index c10b9fee68..d3adccd669 100644 --- a/board/tqm8260/Makefile +++ b/board/tqm8260/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,19 +22,26 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../tqm8xx/) +endif -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../tqm8xx/load_sernum_ethaddr.o +COBJS = $(BOARD).o flash.o ../tqm8xx/load_sernum_ethaddr.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/tqm834x/Makefile b/board/tqm834x/Makefile index 3ecc7d090e..6991cfbf28 100644 --- a/board/tqm834x/Makefile +++ b/board/tqm834x/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # Copyright 2004 Freescale Semiconductor, Inc. # # See file CREDITS for list of people who contributed to this @@ -22,11 +25,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o pci.o +COBJS = $(BOARD).o pci.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -37,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/tqm85xx/Makefile b/board/tqm85xx/Makefile index 3933d46f0c..a6ad98a732 100644 --- a/board/tqm85xx/Makefile +++ b/board/tqm85xx/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -12,7 +12,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o sdram.o +COBJS := $(BOARD).o sdram.o SOBJS := init.o #SOBJS := -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) clean: @@ -40,9 +44,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/tqm8xx/Makefile b/board/tqm8xx/Makefile index 2ff9b4dab2..312c0c4c88 100644 --- a/board/tqm8xx/Makefile +++ b/board/tqm8xx/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o load_sernum_ethaddr.o +COBJS = $(BOARD).o flash.o load_sernum_ethaddr.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/trab/Makefile b/board/trab/Makefile index 159404b269..2b918f6397 100644 --- a/board/trab/Makefile +++ b/board/trab/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,43 +23,51 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := trab.o flash.o vfd.o cmd_trab.o memory.o tsc2000.o auto_update.o +COBJS := trab.o flash.o vfd.o cmd_trab.o memory.o tsc2000.o auto_update.o SOBJS := lowlevel_init.o +COBJS_FKT := trab_fkt.o rs485.o tsc2000.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) $(COBJS_FKT:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +OBJS_FKT := $(addprefix $(obj),$(COBJS_FKT)) + gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) LOAD_ADDR = 0xc100000 ######################################################################### -all: $(LIB) trab_fkt.srec trab_fkt.bin +all: $(LIB) $(obj)trab_fkt.srec $(obj)trab_fkt.bin -$(LIB): $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) -trab_fkt.srec: trab_fkt.o rs485.o tsc2000.o $(LIB) - $(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $^ $(LIB) \ - -L../../examples -lstubs \ - -L../../lib_generic -lgeneric \ +$(obj)trab_fkt.srec: $(OBJS_FKT) $(LIB) + $(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e trab_fkt $^ $(LIB) \ + -L$(obj)../../examples -lstubs \ + -L$(obj)../../lib_generic -lgeneric \ -L$(gcclibdir) -lgcc $(OBJCOPY) -O srec $(<:.o=) $@ -trab_fkt.bin: trab_fkt.srec +$(obj)trab_fkt.bin: $(obj)trab_fkt.srec $(OBJCOPY) -I srec -O binary $< $@ clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(SOBJS) $(OBJS) $(OBJS_FKT) distclean: clean rm -f $(LIB) core *.bak .depend ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/trab/config.mk b/board/trab/config.mk index f2411d009c..800cc28a11 100644 --- a/board/trab/config.mk +++ b/board/trab/config.mk @@ -19,7 +19,7 @@ # download areas is 0C80'0000 # -sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef TEXT_BASE TEXT_BASE = 0x0DF40000 diff --git a/board/uc100/Makefile b/board/uc100/Makefile index 2d2cc23209..a7a93abfe6 100644 --- a/board/uc100/Makefile +++ b/board/uc100/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,19 +23,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -#OBJS = $(BOARD).o flash.o pcmcia.o -OBJS = $(BOARD).o pcmcia.o +#COBJS = $(BOARD).o flash.o pcmcia.o +COBJS = $(BOARD).o pcmcia.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/utx8245/Makefile b/board/utx8245/Makefile index e698afc7f9..0664d9f58b 100644 --- a/board/utx8245/Makefile +++ b/board/utx8245/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # (C) Copyright 2002 @@ -28,20 +28,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -SOBJS = +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): .depend $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/v37/Makefile b/board/v37/Makefile index 7a17067936..b42026981f 100644 --- a/board/v37/Makefile +++ b/board/v37/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/versatile/Makefile b/board/versatile/Makefile index fbdc627e38..27bca10a11 100644 --- a/board/versatile/Makefile +++ b/board/versatile/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := versatile.o flash.o +COBJS := versatile.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/versatile/split_by_variant.sh b/board/versatile/split_by_variant.sh index 576f238ade..25461c2c01 100755 --- a/board/versatile/split_by_variant.sh +++ b/board/versatile/split_by_variant.sh @@ -5,28 +5,30 @@ # --------------------------------------------------------- # Set up the Versatile type define # --------------------------------------------------------- + +mkdir -p ${obj}include variant=PB926EJ-S if [ "$1" == "" ] then echo "$0:: No parameters - using versatilepb_config" - echo "#define CONFIG_ARCH_VERSATILE_PB" > ./include/config.h + echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h variant=PB926EJ-S else case "$1" in versatilepb_config | \ versatile_config) - echo "#define CONFIG_ARCH_VERSATILE_PB" > ./include/config.h + echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h ;; versatileab_config) - echo "#define CONFIG_ARCH_VERSATILE_AB" > ./include/config.h + echo "#define CONFIG_ARCH_VERSATILE_AB" > ${obj}include/config.h variant=AB926EJ-S ;; *) echo "$0:: Unrecognised config - using versatilepb_config" - echo "#define CONFIG_ARCH_VERSATILE_PB" > ./include/config.h + echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h variant=PB926EJ-S ;; @@ -36,5 +38,5 @@ fi # --------------------------------------------------------- # Complete the configuration # --------------------------------------------------------- -./mkconfig -a versatile arm arm926ejs versatile NULL versatile +$MKCONFIG -a versatile arm arm926ejs versatile NULL versatile echo "Variant:: $variant" diff --git a/board/voiceblue/Makefile b/board/voiceblue/Makefile index 6302fa854a..fa614f8d44 100644 --- a/board/voiceblue/Makefile +++ b/board/voiceblue/Makefile @@ -1,4 +1,4 @@ -# (C) Copyright 2000-2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de # # (C) Copyright 2005 @@ -24,43 +24,51 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := voiceblue.o +COBJS := voiceblue.o SOBJS := setup.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) eeprom.c eeprom_start.S +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) LOAD_ADDR = 0x10400000 LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/eeprom.lds +lnk = $(if $(obj),$(obj),.) -all: $(LIB) eeprom.srec eeprom.bin +all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) -eeprom.srec: eeprom.o eeprom_start.o - $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \ - -o $(<:.o=) -e $(<:.o=) $^ \ - -L../../examples -lstubs \ - -L../../lib_generic -lgeneric \ +$(obj)eeprom.srec: $(obj)eeprom.o $(obj)eeprom_start.o + cd $(lnk) && $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \ + -o $(<:.o=) -e eeprom eeprom.o eeprom_start.o \ + -L$(obj)../../examples -lstubs \ + -L$(obj)../../lib_generic -lgeneric \ -L$(gcclibdir) -lgcc $(OBJCOPY) -O srec $(<:.o=) $@ -eeprom.bin: eeprom.srec +$(obj)eeprom.bin: $(obj)eeprom.srec $(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null clean: - rm -f $(SOBJS) $(OBJS) eeprom eeprom.srec eeprom.bin + rm -f $(SOBJS) $(OBJS) $(obj)eeprom \ + $(obj)eeprom.srec $(obj)eeprom.bin \ + $(obj)eeprom.o $(obj)eeprom_start.o + distclean: clean rm -f $(LIB) core config.tmp *.bak .depend ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk index b77c91c65e..d55daa41d9 100644 --- a/board/voiceblue/config.mk +++ b/board/voiceblue/config.mk @@ -3,7 +3,7 @@ # entry 1000'8000 (mem base + reserved) # -sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifeq ($(VOICEBLUE_SMALL_FLASH),y) # We load ourself to internal SRAM at 2001'2000 diff --git a/board/w7o/Makefile b/board/w7o/Makefile index d008f896cd..2ec449d7a6 100644 --- a/board/w7o/Makefile +++ b/board/w7o/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2001 # Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. # @@ -23,12 +26,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o fpga.o fsboot.o post2.o vpd.o cmd_vpd.o \ +COBJS = $(BOARD).o flash.o fpga.o fsboot.o post2.o vpd.o cmd_vpd.o \ watchdog.o SOBJS = init.o post1.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ @@ -40,9 +47,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/wepep250/Makefile b/board/wepep250/Makefile index 11ad8fbecc..b5b5a96f06 100644 --- a/board/wepep250/Makefile +++ b/board/wepep250/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := wepep250.o flash.o +COBJS := wepep250.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/westel/amx860/Makefile b/board/westel/amx860/Makefile index 7a2014d466..1b57d2b023 100644 --- a/board/westel/amx860/Makefile +++ b/board/westel/amx860/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,18 +23,22 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/xaeniax/Makefile b/board/xaeniax/Makefile index 7c5f0cd1a1..655dc9a58a 100644 --- a/board/xaeniax/Makefile +++ b/board/xaeniax/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := xaeniax.o flash.o +COBJS := xaeniax.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/xilinx/ml300/Makefile b/board/xilinx/ml300/Makefile index 880c494c99..4ecf37a9c5 100644 --- a/board/xilinx/ml300/Makefile +++ b/board/xilinx/ml300/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -19,14 +19,22 @@ # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA +# include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +$(shell mkdir -p $(obj)../xilinx_enet) +$(shell mkdir -p $(obj)../xilinx_iic) +endif -CFLAGS += -I../ml300 -I../common -I../xilinx_enet -I../xilinx_iic +INCS := -I../ml300 -I../common -I../xilinx_enet -I../xilinx_iic +CFLAGS += $(INCS) +HOST_CFLAGS += $(INCS) -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o \ +COBJS = $(BOARD).o \ serial.o \ ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \ ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \ @@ -39,6 +47,10 @@ OBJS = $(BOARD).o \ SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ @@ -50,9 +62,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/xm250/Makefile b/board/xm250/Makefile index 1b0a3f0178..22f20243a6 100644 --- a/board/xm250/Makefile +++ b/board/xm250/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,13 +23,17 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := xm250.o flash.o +COBJS := xm250.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/xpedite1k/Makefile b/board/xpedite1k/Makefile index c5c09152d8..5f3e34e246 100644 --- a/board/xpedite1k/Makefile +++ b/board/xpedite1k/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002-2004 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o -OBJS +=flash.o +COBJS = $(BOARD).o flash.o SOBJS = init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) @@ -40,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/xsengine/Makefile b/board/xsengine/Makefile index ed1464af3e..78ca9d6088 100644 --- a/board/xsengine/Makefile +++ b/board/xsengine/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,12 +23,16 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := xsengine.o flash.o +COBJS := xsengine.o flash.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -39,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/zpc1900/Makefile b/board/zpc1900/Makefile index 8b10993194..e880f873af 100644 --- a/board/zpc1900/Makefile +++ b/board/zpc1900/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,11 +23,15 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := $(BOARD).o +COBJS := $(BOARD).o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) clean: @@ -38,9 +42,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/zylonite/Makefile b/board/zylonite/Makefile index f3ad67458e..4b70f704c1 100644 --- a/board/zylonite/Makefile +++ b/board/zylonite/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -20,14 +20,19 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # + include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := zylonite.o nand.o +COBJS := zylonite.o nand.o SOBJS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) clean: @@ -38,9 +43,9 @@ distclean: clean ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/zylonite/config.mk b/board/zylonite/config.mk index b5d5955ef5..09b0f71557 100644 --- a/board/zylonite/config.mk +++ b/board/zylonite/config.mk @@ -2,5 +2,3 @@ #TEXT_BASE = 0xa1700000 #TEXT_BASE = 0xa3080000 TEXT_BASE = 0xa3008000 - -BOARDLIBS = drivers/nand/libnand.a diff --git a/common/Makefile b/common/Makefile index eb0b5dadfe..d626fe4d4b 100644 --- a/common/Makefile +++ b/common/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2004 +# (C) Copyright 2004-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,7 +23,7 @@ include $(TOPDIR)/config.mk -LIB = libcommon.a +LIB = $(obj)libcommon.a AOBJS = @@ -53,28 +53,29 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \ usb.o usb_kbd.o usb_storage.o \ virtex2.o xilinx.o crc16.o xyzModem.o -OBJS = $(AOBJS) $(COBJS) +SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS)) CPPFLAGS += -I.. all: $(LIB) $(AOBJS) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) -environment.o: environment.c ../tools/envcrc +$(obj)environment.o: $(src)environment.c $(obj)../tools/envcrc $(CC) $(AFLAGS) -Wa,--no-warn \ - -DENV_CRC=$(shell ../tools/envcrc) \ - -c -o $@ environment.c + -DENV_CRC=$(shell $(obj)../tools/envcrc) \ + -c -o $@ $(src)environment.c -../tools/envcrc: +$(obj)../tools/envcrc: $(MAKE) -C ../tools ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/config.mk b/config.mk index b59667a833..3ed7107fb8 100644 --- a/config.mk +++ b/config.mk @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,6 +23,22 @@ ######################################################################### +ifneq ($(OBJTREE),$(SRCTREE)) +ifeq ($(CURDIR),$(SRCTREE)) +dir := +else +dir := $(subst $(SRCTREE)/,,$(CURDIR)) +endif + +obj := $(if $(dir),$(OBJTREE)/$(dir)/,$(OBJTREE)/) +src := $(if $(dir),$(SRCTREE)/$(dir)/,$(SRCTREE)/) + +$(shell mkdir -p $(obj)) +else +obj := +src := +endif + # clean the slate ... PLATFORM_RELFLAGS = PLATFORM_CPPFLAGS = @@ -124,9 +140,14 @@ gccincdir := $(shell $(CC) -print-file-name=include) CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \ -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \ - -I$(TOPDIR)/include \ - -fno-builtin -ffreestanding -nostdinc -isystem \ - $(gccincdir) -pipe $(PLATFORM_CPPFLAGS) + +ifneq ($(OBJTREE),$(SRCTREE)) +CPPFLAGS += -I$(OBJTREE)/include2 -I$(OBJTREE)/include +endif + +CPPFLAGS += -I$(TOPDIR)/include +CPPFLAGS += -fno-builtin -ffreestanding -nostdinc \ + -isystem $(gccincdir) -pipe $(PLATFORM_CPPFLAGS) ifdef BUILD_TAG CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes \ @@ -192,11 +213,23 @@ export TEXT_BASE PLATFORM_CPPFLAGS PLATFORM_RELFLAGS CPPFLAGS CFLAGS AFLAGS ######################################################################### +ifndef REMOTE_BUILD + %.s: %.S - $(CPP) $(AFLAGS) -o $@ $(CURDIR)/$< + $(CPP) $(AFLAGS) -o $@ $< %.o: %.S - $(CC) $(AFLAGS) -c -o $@ $(CURDIR)/$< + $(CC) $(AFLAGS) -c -o $@ $< %.o: %.c $(CC) $(CFLAGS) -c -o $@ $< +else + +$(obj)%.s: %.S + $(CPP) $(AFLAGS) -o $@ $< +$(obj)%.o: %.S + $(CC) $(AFLAGS) -c -o $@ $< +$(obj)%.o: %.c + $(CC) $(CFLAGS) -c -o $@ $< +endif + ######################################################################### diff --git a/cpu/74xx_7xx/Makefile b/cpu/74xx_7xx/Makefile index 0e10d3a4da..e82fffcf0b 100644 --- a/cpu/74xx_7xx/Makefile +++ b/cpu/74xx_7xx/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2001 # Josh Huber , Mission Critical Linux, Inc. # @@ -23,22 +26,26 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -ASOBJS = cache.o kgdb.o io.o -OBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o +SOBJS = cache.o kgdb.o io.o +COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) -all: .depend $(START) $(ASOBJS) $(LIB) +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) - $(AR) crv $@ $(ASOBJS) $(OBJS) + $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(ASOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/arm1136/Makefile b/cpu/arm1136/Makefile index 203278e9cf..5d2c7eb497 100644 --- a/cpu/arm1136/Makefile +++ b/cpu/arm1136/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = interrupts.o cpu.o +COBJS = interrupts.o cpu.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/arm720t/Makefile b/cpu/arm720t/Makefile index f273d92997..539a48c414 100644 --- a/cpu/arm720t/Makefile +++ b/cpu/arm720t/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = serial.o serial_netarm.o interrupts.o cpu.o +COBJS = serial.o serial_netarm.o interrupts.o cpu.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/arm920t/Makefile b/cpu/arm920t/Makefile index 8f256e9022..199fe0c2cb 100644 --- a/cpu/arm920t/Makefile +++ b/cpu/arm920t/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = cpu.o interrupts.o +COBJS = cpu.o interrupts.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/arm920t/at91rm9200/Makefile b/cpu/arm920t/at91rm9200/Makefile index aec9cb6409..26b0b94f2b 100644 --- a/cpu/arm920t/at91rm9200/Makefile +++ b/cpu/arm920t/at91rm9200/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2005 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,22 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(SOC).a +LIB = $(obj)lib$(SOC).a -OBJS = bcm5221.o dm9161.o ether.o i2c.o interrupts.o \ +COBJS = bcm5221.o dm9161.o ether.o i2c.o interrupts.o \ lxt972.o serial.o usb_ohci.o SOBJS = lowlevel_init.o -all: .depend $(LIB) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/arm920t/imx/Makefile b/cpu/arm920t/imx/Makefile index 8865f827d4..e238fc01fc 100644 --- a/cpu/arm920t/imx/Makefile +++ b/cpu/arm920t/imx/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,20 +23,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(SOC).a +LIB = $(obj)lib$(SOC).a -OBJS = generic.o interrupts.o serial.o speed.o +COBJS = generic.o interrupts.o serial.o speed.o -all: .depend $(LIB) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/arm920t/ks8695/Makefile b/cpu/arm920t/ks8695/Makefile index ac49060897..6342435d92 100644 --- a/cpu/arm920t/ks8695/Makefile +++ b/cpu/arm920t/ks8695/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2005 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,24 @@ include $(TOPDIR)/config.mk -LIB = lib$(SOC).a +LIB = $(obj)lib$(SOC).a -OBJS = interrupts.o serial.o +COBJS = interrupts.o serial.o SOBJS = lowlevel_init.o -all: .depend $(LIB) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile index af9e4effce..557298eac8 100644 --- a/cpu/arm920t/s3c24x0/Makefile +++ b/cpu/arm920t/s3c24x0/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,24 @@ include $(TOPDIR)/config.mk -LIB = lib$(SOC).a +LIB = $(obj)lib$(SOC).a -OBJS = i2c.o interrupts.o serial.o speed.o \ +COBJS = i2c.o interrupts.o serial.o speed.o \ usb_ohci.o -all: .depend $(LIB) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/arm925t/Makefile b/cpu/arm925t/Makefile index a1db818a8f..086b1a3779 100644 --- a/cpu/arm925t/Makefile +++ b/cpu/arm925t/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = interrupts.o cpu.o omap925.o +COBJS = interrupts.o cpu.o omap925.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/arm926ejs/Makefile b/cpu/arm926ejs/Makefile index 060fd20c65..a410c2f99f 100644 --- a/cpu/arm926ejs/Makefile +++ b/cpu/arm926ejs/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = interrupts.o cpu.o cpuinfo.o +COBJS = interrupts.o cpu.o cpuinfo.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/arm926ejs/omap/Makefile b/cpu/arm926ejs/omap/Makefile index f9d3378197..7eca2f0d78 100644 --- a/cpu/arm926ejs/omap/Makefile +++ b/cpu/arm926ejs/omap/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2005 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(SOC).a +LIB = $(obj)lib$(SOC).a -OBJS = timer.o +COBJS = timer.o SOBJS = reset.o -all: .depend $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/arm926ejs/versatile/Makefile b/cpu/arm926ejs/versatile/Makefile index f9d3378197..7eca2f0d78 100644 --- a/cpu/arm926ejs/versatile/Makefile +++ b/cpu/arm926ejs/versatile/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2005 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(SOC).a +LIB = $(obj)lib$(SOC).a -OBJS = timer.o +COBJS = timer.o SOBJS = reset.o -all: .depend $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/arm946es/Makefile b/cpu/arm946es/Makefile index 203278e9cf..5d2c7eb497 100644 --- a/cpu/arm946es/Makefile +++ b/cpu/arm946es/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = interrupts.o cpu.o +COBJS = interrupts.o cpu.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/arm_intcm/Makefile b/cpu/arm_intcm/Makefile index 203278e9cf..5d2c7eb497 100644 --- a/cpu/arm_intcm/Makefile +++ b/cpu/arm_intcm/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = interrupts.o cpu.o +COBJS = interrupts.o cpu.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/bf533/Makefile b/cpu/bf533/Makefile index c63a8f6d01..a5c48dc04d 100644 --- a/cpu/bf533/Makefile +++ b/cpu/bf533/Makefile @@ -2,7 +2,7 @@ # # Copyright (c) 2005 blackfin.uclinux.org # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -26,21 +26,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o start1.o interrupt.o cache.o cplbhdlr.o cplbmgr.o flush.o -OBJS = cpu.o traps.o ints.o serial.o interrupts.o +COBJS = cpu.o traps.o ints.o serial.o interrupts.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/i386/Makefile b/cpu/i386/Makefile index c44412a025..cd46dea2c7 100644 --- a/cpu/i386/Makefile +++ b/cpu/i386/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2002 # Daniel Engström, Omicron Ceti AB, daniel@omicron.se. # @@ -23,22 +26,26 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o start16.o reset.o COBJS = serial.o interrupts.o cpu.o timer.o sc520.o -AOBJS = sc520_asm.o +SOBJS = sc520_asm.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) -$(LIB): $(COBJS) $(AOBJS) - $(AR) crv $@ $(COBJS) $(AOBJS) +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(COBJS:.o=.c) $(AOBJS:.o=.S) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(COBJS:.o=.c) $(AOBJS:.o=.S) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/ixp/Makefile b/cpu/ixp/Makefile index ba2e589277..28672705c6 100644 --- a/cpu/ixp/Makefile +++ b/cpu/ixp/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = serial.o interrupts.o cpu.o timer.o pci.o +COBJS = serial.o interrupts.o cpu.o timer.o pci.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/ixp/npe/Makefile b/cpu/ixp/npe/Makefile index 937de9d47b..412b418b81 100644 --- a/cpu/ixp/npe/Makefile +++ b/cpu/ixp/npe/Makefile @@ -23,11 +23,13 @@ include $(TOPDIR)/config.mk -LIB := libnpe.a +LIB := $(obj)libnpe.a -CFLAGS += -I$(TOPDIR)/cpu/ixp/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB +LOCAL_CFLAGS += -I$(TOPDIR)/cpu/ixp/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB +CFLAGS += $(LOCAL_CFLAGS) +HOST_CFLAGS += $(LOCAL_CFLAGS) -OBJS := npe.o \ +COBJS := npe.o \ miiphy.o \ IxOsalBufferMgt.o \ IxOsalIoMem.o \ @@ -78,14 +80,21 @@ OBJS := npe.o \ IxNpeMhSolicitedCbMgr.o \ IxNpeMhUnsolicitedCbMgr.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + all: $(LIB) -$(LIB): $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/lh7a40x/Makefile b/cpu/lh7a40x/Makefile index b45bd6a296..2fcafb0432 100644 --- a/cpu/lh7a40x/Makefile +++ b/cpu/lh7a40x/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = cpu.o speed.o interrupts.o serial.o +COBJS = cpu.o speed.o interrupts.o serial.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/mcf52x2/Makefile b/cpu/mcf52x2/Makefile index 879deb714a..a05a803cb2 100644 --- a/cpu/mcf52x2/Makefile +++ b/cpu/mcf52x2/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,21 +25,25 @@ include $(TOPDIR)/config.mk # CFLAGS += -DET_DEBUG -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = -OBJS = serial.o interrupts.o cpu.o speed.o cpu_init.o fec.o +COBJS = serial.o interrupts.o cpu.o speed.o cpu_init.o fec.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/microblaze/Makefile b/cpu/microblaze/Makefile index 610043eca9..07ed6cedc2 100644 --- a/cpu/microblaze/Makefile +++ b/cpu/microblaze/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = cpu.o interrupts.o +COBJS = cpu.o interrupts.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/mips/Makefile b/cpu/mips/Makefile index c8b30c7589..f9a49df33d 100644 --- a/cpu/mips/Makefile +++ b/cpu/mips/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,23 +23,27 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = asc_serial.o au1x00_serial.o au1x00_eth.o au1x00_usb_ohci.o \ +COBJS = asc_serial.o au1x00_serial.o au1x00_eth.o au1x00_usb_ohci.o \ cpu.o interrupts.o incaip_clock.o SOBJS = incaip_wdt.o cache.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/mpc5xx/Makefile b/cpu/mpc5xx/Makefile index b787b61410..d696e79a21 100644 --- a/cpu/mpc5xx/Makefile +++ b/cpu/mpc5xx/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2003 # Martin Winistoerfer, martinwinistoerfer@gmx.ch. # @@ -32,21 +35,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a + +START = start.o +COBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o -START = start.S -OBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) -all: .depend $(START) $(LIB) +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile index a97b625171..683ded8c9a 100644 --- a/cpu/mpc5xxx/Makefile +++ b/cpu/mpc5xxx/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,23 +23,27 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -ASOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o -OBJS = i2c.o traps.o cpu.o cpu_init.o fec.o ide.o interrupts.o \ +SOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o +COBJS = i2c.o traps.o cpu.o cpu_init.o fec.o ide.o interrupts.o \ loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o -all: .depend $(START) $(ASOBJS) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) - $(AR) crv $@ $(ASOBJS) $(OBJS) + $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(ASOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/mpc8220/Makefile b/cpu/mpc8220/Makefile index 7c9b6c990f..1f2e93176f 100644 --- a/cpu/mpc8220/Makefile +++ b/cpu/mpc8220/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,24 +23,28 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -ASOBJS = io.o fec_dma_tasks.o -OBJS = cpu.o cpu_init.o dramSetup.o fec.o i2c.o \ +SOBJS = io.o fec_dma_tasks.o +COBJS = cpu.o cpu_init.o dramSetup.o fec.o i2c.o \ interrupts.o loadtask.o speed.o \ traps.o uart.o pci.o -all: .depend $(START) $(ASOBJS) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) - $(AR) crv $@ $(ASOBJS) $(OBJS) + $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(ASOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/mpc824x/Makefile b/cpu/mpc824x/Makefile index df0d64e416..d9fd9bfdb1 100644 --- a/cpu/mpc824x/Makefile +++ b/cpu/mpc824x/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -22,26 +22,35 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)drivers/epic) +$(shell mkdir -p $(obj)drivers/i2c) +endif -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a -START = start.S -OBJS = traps.o cpu.o cpu_init.o interrupts.o speed.o \ - drivers/epic/epic1.o drivers/i2c/i2c.o pci.o bedbug_603e.o +START = start.o +COBJS = traps.o cpu.o cpu_init.o interrupts.o speed.o \ + drivers/epic/epic1.o drivers/i2c/i2c.o pci.o +COBJS_LN = bedbug_603e.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) $(addprefix $(obj),$(COBJS_LN:.o=.c)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS_LN)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) -bedbug_603e.c: - ln -s ../mpc8260/bedbug_603e.c bedbug_603e.c +$(obj)bedbug_603e.c: + ln -s $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/mpc8260/Makefile b/cpu/mpc8260/Makefile index b4c269f9c9..b1f1c18992 100644 --- a/cpu/mpc8260/Makefile +++ b/cpu/mpc8260/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,23 +23,27 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o kgdb.o -OBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \ +COBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \ interrupts.o ether_scc.o ether_fcc.o i2c.o commproc.o \ bedbug_603e.o pci.o spi.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) - $(AR) crv $@ $(OBJS) kgdb.o + $(AR) crv $@ $(OBJS) $(obj)kgdb.o ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile index 60df4cdec6..f3fa6fd93a 100644 --- a/cpu/mpc83xx/Makefile +++ b/cpu/mpc83xx/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # Copyright 2004 Freescale Semiconductor, Inc. # # See file CREDITS for list of people who contributed to this @@ -22,31 +25,26 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a -START = start.o \ - resetvec.o +START = start.o resetvec.o +COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \ + i2c.o spd_sdram.o -COBJS = traps.o \ - cpu.o \ - cpu_init.o \ - speed.o \ - interrupts.o \ - i2c.o \ - spd_sdram.o +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) -OBJS = $(COBJS) - -all: .depend $(START) $(LIB) +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile index 5298dc113f..bbc50844e0 100644 --- a/cpu/mpc85xx/Makefile +++ b/cpu/mpc85xx/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2002,2003 Motorola Inc. # Xianghua Xiao,X.Xiao@motorola.com # @@ -23,23 +26,26 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o resetvec.o COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \ pci.o serial_scc.o commproc.o ether_fcc.o i2c.o spd_sdram.o -OBJS = $(COBJS) -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/mpc8xx/Makefile b/cpu/mpc8xx/Makefile index de75fad3cf..6451e0551b 100644 --- a/cpu/mpc8xx/Makefile +++ b/cpu/mpc8xx/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,25 +25,29 @@ include $(TOPDIR)/config.mk # CFLAGS += -DET_DEBUG -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o kgdb.o -OBJS = bedbug_860.o commproc.o cpu.o cpu_init.o \ +COBJS = bedbug_860.o commproc.o cpu.o cpu_init.o \ fec.o i2c.o interrupts.o lcd.o scc.o \ serial.o speed.o spi.o \ traps.o upatch.o video.o SOBJS = plprcr_write.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) kgdb.o +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) $(obj)kgdb.o ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(SOBJS:.o=.S) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(SOBJS:.o=.S) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/nios/Makefile b/cpu/nios/Makefile index 78553256a0..cdab7b008f 100644 --- a/cpu/nios/Makefile +++ b/cpu/nios/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,22 +23,26 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -AOBJS = traps.o -OBJS = cpu.o interrupts.o serial.o asmi.o spi.o +SOBJS = traps.o +COBJS = cpu.o interrupts.o serial.o asmi.o spi.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) -$(LIB): $(OBJS) $(AOBJS) - $(AR) crv $@ $(OBJS) $(AOBJS) +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/nios2/Makefile b/cpu/nios2/Makefile index 11fda50c0c..f903129598 100644 --- a/cpu/nios2/Makefile +++ b/cpu/nios2/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,22 +23,26 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -AOBJS = exceptions.o -OBJS = cpu.o interrupts.o serial.o sysid.o traps.o epcs.o +SOBJS = exceptions.o +COBJS = cpu.o interrupts.o serial.o sysid.o traps.o epcs.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) -$(LIB): $(OBJS) $(AOBJS) - $(AR) crv $@ $(OBJS) $(AOBJS) +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile index 7d6990f9a8..93416b57bf 100644 --- a/cpu/ppc4xx/Makefile +++ b/cpu/ppc4xx/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,10 +23,10 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o resetvec.o kgdb.o -AOBJS = dcr.o +SOBJS = dcr.o COBJS = 405gp_pci.o 4xx_enet.o \ bedbug_405.o commproc.o \ cpu.o cpu_init.o i2c.o interrupts.o \ @@ -34,18 +34,20 @@ COBJS = 405gp_pci.o 4xx_enet.o \ spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o \ 440spe_pcie.o -OBJS = $(AOBJS) $(COBJS) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) -all: .depend $(START) $(LIB) +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/pxa/Makefile b/cpu/pxa/Makefile index 1af53d6ad1..a6f6b599ae 100644 --- a/cpu/pxa/Makefile +++ b/cpu/pxa/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o +COBJS = serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/s3c44b0/Makefile b/cpu/s3c44b0/Makefile index d43c73e533..62cb514113 100644 --- a/cpu/s3c44b0/Makefile +++ b/cpu/s3c44b0/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = serial.o interrupts.o cpu.o +COBJS = serial.o interrupts.o cpu.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/cpu/sa1100/Makefile b/cpu/sa1100/Makefile index 8c950daee8..62cb514113 100644 --- a/cpu/sa1100/Makefile +++ b/cpu/sa1100/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,25 @@ include $(TOPDIR)/config.mk -LIB = lib$(CPU).a +LIB = $(obj)lib$(CPU).a START = start.o -OBJS = serial.o interrupts.o cpu.o +COBJS = serial.o interrupts.o cpu.o -all: .depend $(START) $(LIB) +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/disk/Makefile b/disk/Makefile index 39677f1e2e..3bdb018a06 100644 --- a/disk/Makefile +++ b/disk/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,20 +25,23 @@ include $(TOPDIR)/config.mk #CFLAGS += -DET_DEBUG -DDEBUG -LIB = libdisk.a +LIB = $(obj)libdisk.a -OBJS = part.o part_mac.o part_dos.o part_iso.o part_amiga.o +COBJS = part.o part_mac.o part_dos.o part_iso.o part_amiga.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(START) $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/drivers/Makefile b/drivers/Makefile index 9be95c7bb8..d0acf8e32f 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,9 +25,9 @@ include $(TOPDIR)/config.mk # CFLAGS += -DET_DEBUG -DDEBUG -LIB = libdrivers.a +LIB = $(obj)libdrivers.a -OBJS = 3c589.o 5701rls.o ali512x.o \ +COBJS = 3c589.o 5701rls.o ali512x.o \ bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \ cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \ e1000.o eepro100.o \ @@ -52,16 +52,19 @@ OBJS = 3c589.o 5701rls.o ali512x.o \ pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \ rpx_pcmcia.o +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + all: $(LIB) -$(LIB): $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/drivers/nand/Makefile b/drivers/nand/Makefile index 96f67dfca8..d707658612 100644 --- a/drivers/nand/Makefile +++ b/drivers/nand/Makefile @@ -1,16 +1,45 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + include $(TOPDIR)/config.mk -LIB := libnand.a +LIB := $(obj)libnand.a + +COBJS := nand.o nand_base.o nand_ids.o nand_ecc.o nand_bbt.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) -OBJS := nand.o nand_base.o nand_ids.o nand_ecc.o nand_bbt.o all: $(LIB) -$(LIB): $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/nand_legacy/Makefile index 7e2cf66730..23df5b752b 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/nand_legacy/Makefile @@ -1,16 +1,45 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + include $(TOPDIR)/config.mk -LIB := libnand_legacy.a +LIB := $(obj)libnand_legacy.a + +COBJS := nand_legacy.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) -OBJS := nand_legacy.o all: $(LIB) -$(LIB): $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/sk98lin/Makefile b/drivers/sk98lin/Makefile index 8ee0e216cd..ac21e02133 100644 --- a/drivers/sk98lin/Makefile +++ b/drivers/sk98lin/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,15 +24,19 @@ # # Makefile for the SysKonnect SK-98xx device driver. # + include $(TOPDIR)/config.mk -LIB := libsk98lin.a +LIB := $(obj)libsk98lin.a + +COBJS := skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \ + ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \ + skxmac2.o skcsum.o #skproc.o -OBJS := skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \ - ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \ - skxmac2.o skcsum.o #skproc.o +COBJS += uboot_skb.o uboot_drv.o -OBJS += uboot_skb.o uboot_drv.o +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) # DBGDEF = \ # -DDEBUG @@ -84,18 +88,20 @@ endif EXTRA_CFLAGS += -I. -DSK_USE_CSUM $(DBGDEF) CFLAGS += $(EXTRA_CFLAGS) +HOST_CFLAGS += $(EXTRA_CFLAGS) all: $(LIB) -$(LIB): $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### + diff --git a/dtt/Makefile b/dtt/Makefile index 0a334784de..486008a1c3 100644 --- a/dtt/Makefile +++ b/dtt/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2001 # Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. # @@ -25,20 +28,23 @@ include $(TOPDIR)/config.mk #CFLAGS += -DDEBUG -LIB = libdtt.a +LIB = $(obj)libdtt.a + +COBJS = lm75.o ds1621.o adm1021.o -OBJS = lm75.o ds1621.o adm1021.o +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(START) $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/examples/Makefile b/examples/Makefile index a342d75062..85118eac68 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -104,9 +104,9 @@ ifeq ($(BIG_ENDIAN),y) EX_LDFLAGS += -EB endif -OBJS = $(SREC:.srec=.o) +COBJS := $(SREC:.srec=.o) -LIB = libstubs.a +LIB = $(obj)libstubs.a LIBAOBJS= ifeq ($(ARCH),ppc) LIBAOBJS+= $(ARCH)_longjmp.o $(ARCH)_setjmp.o @@ -115,34 +115,40 @@ ifeq ($(CPU),mpc8xx) LIBAOBJS+= test_burst_lib.o endif LIBCOBJS= stubs.o -LIBOBJS = $(LIBAOBJS) $(LIBCOBJS) + +LIBOBJS = $(addprefix $(obj),$(LIBAOBJS) $(LIBCOBJS)) + +SRCS := $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(if $(LIBAOBJS),$(LIBAOBJS:.o=.S)) +OBJS := $(addprefix $(obj),$(COBJS)) +BIN := $(addprefix $(obj),$(BIN)) +SREC := $(addprefix $(obj),$(SREC)) gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) clibdir := $(shell dirname `$(CC) $(CFLAGS) -print-file-name=libc.a`) CPPFLAGS += -I.. -all: .depend $(OBJS) $(LIB) $(SREC) $(BIN) +all: $(obj).depend $(OBJS) $(LIB) $(SREC) $(BIN) ######################################################################### -$(LIB): .depend $(LIBOBJS) - $(AR) crv $@ $(LIBOBJS) +$(LIB): $(obj).depend $(LIBOBJS) + $(AR) crv $@ $(LIBOBJS) -%: %.o $(LIB) - $(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \ - -o $@ -e $(<:.o=) $< $(LIB) \ - -L$(gcclibdir) -lgcc -%.srec: % - $(OBJCOPY) -O srec $< $@ 2>/dev/null +$(obj)%: $(obj)%.o $(LIB) + $(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \ + -o $@ -e $(notdir $(<:.o=)) $< $(LIB) \ + -L$(gcclibdir) -lgcc +$(obj)%.srec: $(obj)% + $(OBJCOPY) -O srec $< $@ 2>/dev/null -%.bin: % - $(OBJCOPY) -O binary $< $@ 2>/dev/null +$(obj)%.bin: $(obj)% + $(OBJCOPY) -O binary $< $@ 2>/dev/null ######################################################################### -.depend: Makefile $(OBJS:.o=.c) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/fs/Makefile b/fs/Makefile index 79cbdeaa7a..273d90e011 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,6 +24,6 @@ SUBDIRS := jffs2 cramfs fdos fat reiserfs ext2 -.depend all: +$(obj).depend all: @for dir in $(SUBDIRS) ; do \ $(MAKE) -C $$dir $@ ; done diff --git a/fs/cramfs/Makefile b/fs/cramfs/Makefile index 54a475ef85..1a6f4b7d00 100644 --- a/fs/cramfs/Makefile +++ b/fs/cramfs/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,25 +23,27 @@ include $(TOPDIR)/config.mk -LIB = libcramfs.a +LIB = $(obj)libcramfs.a AOBJS = COBJS = cramfs.o uncompress.o -OBJS = $(AOBJS) $(COBJS) + +SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS)) #CPPFLAGS += all: $(LIB) $(AOBJS) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/fs/ext2/Makefile b/fs/ext2/Makefile index 3b193684f5..2e420d536b 100644 --- a/fs/ext2/Makefile +++ b/fs/ext2/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2003 # Pavel Bartusek, Sysgo Real-Time Solutions AG, pba@sysgo.de # @@ -24,25 +27,26 @@ include $(TOPDIR)/config.mk -LIB = libext2fs.a +LIB = $(obj)libext2fs.a AOBJS = COBJS = ext2fs.o dev.o -OBJS = $(AOBJS) $(COBJS) + +SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS)) #CPPFLAGS += all: $(LIB) $(AOBJS) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) - ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/fs/fat/Makefile b/fs/fat/Makefile index e4627577b7..2fa428c4dc 100644 --- a/fs/fat/Makefile +++ b/fs/fat/Makefile @@ -19,28 +19,27 @@ # MA 02111-1307 USA # -TOPDIR=../../ - include $(TOPDIR)/config.mk -LIB = libfat.a +LIB = $(obj)libfat.a AOBJS = COBJS = fat.o file.o -OBJS = $(AOBJS) $(COBJS) +SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS)) all: $(LIB) $(AOBJS) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/fs/fdos/Makefile b/fs/fdos/Makefile index c25e744b92..e55ac8abbd 100644 --- a/fs/fdos/Makefile +++ b/fs/fdos/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2002 # Stäubli Faverges - # Pierre AUBERT p.aubert@staubli.com @@ -25,25 +28,27 @@ include $(TOPDIR)/config.mk -LIB = libfdos.a +LIB = $(obj)libfdos.a AOBJS = COBJS = fat.o vfat.o dev.o fdos.o fs.o subdir.o -OBJS = $(AOBJS) $(COBJS) + +SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS)) #CPPFLAGS += all: $(LIB) $(AOBJS) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/fs/jffs2/Makefile b/fs/jffs2/Makefile index f28b17a414..82436bbfec 100644 --- a/fs/jffs2/Makefile +++ b/fs/jffs2/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,26 +23,28 @@ include $(TOPDIR)/config.mk -LIB = libjffs2.a +LIB = $(obj)libjffs2.a AOBJS = COBJS = jffs2_1pass.o compr_rtime.o compr_rubin.o compr_zlib.o mini_inflate.o COBJS += compr_lzo.o compr_lzari.o -OBJS = $(AOBJS) $(COBJS) + +SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS)) #CPPFLAGS += all: $(LIB) $(AOBJS) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/fs/reiserfs/Makefile b/fs/reiserfs/Makefile index 98a9a8d30e..45028cb15e 100644 --- a/fs/reiserfs/Makefile +++ b/fs/reiserfs/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2003 # Pavel Bartusek, Sysgo Real-Time Solutions AG, pba@sysgo.de # @@ -24,25 +27,26 @@ include $(TOPDIR)/config.mk -LIB = libreiserfs.a +LIB = $(obj)libreiserfs.a AOBJS = COBJS = reiserfs.o dev.o mode_string.o -OBJS = $(AOBJS) $(COBJS) + +SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS)) #CPPFLAGS += all: $(LIB) $(AOBJS) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) - ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/lib_arm/Makefile b/lib_arm/Makefile index e56e06b1b3..3e0a5c7fe5 100644 --- a/lib_arm/Makefile +++ b/lib_arm/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,23 +23,24 @@ include $(TOPDIR)/config.mk -LIB = lib$(ARCH).a +LIB = $(obj)lib$(ARCH).a -AOBJS = _ashldi3.o _ashrdi3.o _divsi3.o _modsi3.o _udivsi3.o _umodsi3.o +SOBJS = _ashldi3.o _ashrdi3.o _divsi3.o _modsi3.o _udivsi3.o _umodsi3.o COBJS = armlinux.o board.o \ cache.o div0.o -OBJS = $(AOBJS) $(COBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile index bc280d01f8..549c8c1033 100644 --- a/lib_blackfin/Makefile +++ b/lib_blackfin/Makefile @@ -3,7 +3,7 @@ # # Copyright (c) 2005 blackfin.uclinux.org # -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -27,21 +27,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(ARCH).a +LIB = $(obj)lib$(ARCH).a -AOBJS = +SOBJS = COBJS = board.o bf533_linux.o bf533_string.o cache.o muldi3.o -OBJS = $(AOBJS) $(COBJS) -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/lib_generic/Makefile b/lib_generic/Makefile index 18c41b1bd9..fcd43c676f 100644 --- a/lib_generic/Makefile +++ b/lib_generic/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,21 +23,24 @@ include $(TOPDIR)/config.mk -LIB = libgeneric.a +LIB = $(obj)libgeneric.a -OBJS = bzlib.o bzlib_crctable.o bzlib_decompress.o \ +COBJS = bzlib.o bzlib_crctable.o bzlib_decompress.o \ bzlib_randtable.o bzlib_huffman.o \ crc32.o ctype.o display_options.o ldiv.o \ string.o vsprintf.o zlib.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/lib_i386/Makefile b/lib_i386/Makefile index e5925e5542..8dc809e1e2 100644 --- a/lib_i386/Makefile +++ b/lib_i386/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,23 +23,24 @@ include $(TOPDIR)/config.mk -LIB = lib$(ARCH).a +LIB = $(obj)lib$(ARCH).a -AOBJS = bios.o bios_pci.o realmode_switch.o +SOBJS = bios.o bios_pci.o realmode_switch.o COBJS = board.o bios_setup.o i386_linux.o zimage.o realmode.o \ pci_type1.o pci.o video_bios.o video.o -OBJS = $(AOBJS) $(COBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/lib_m68k/Makefile b/lib_m68k/Makefile index 698da36e68..f9e83988c1 100644 --- a/lib_m68k/Makefile +++ b/lib_m68k/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,20 +23,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(ARCH).a +LIB = $(obj)lib$(ARCH).a + +SOBJS = -AOBJS = COBJS = cache.o traps.o time.o board.o m68k_linux.o -OBJS = $(AOBJS) $(COBJS) -$(LIB): .depend $(OBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/lib_microblaze/Makefile b/lib_microblaze/Makefile index ec01722f87..35de97fe16 100644 --- a/lib_microblaze/Makefile +++ b/lib_microblaze/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003-2004 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,22 +23,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(ARCH).a +LIB = $(obj)lib$(ARCH).a -AOBJS = +SOBJS = COBJS = board.o microblaze_linux.o time.o cache.o -OBJS = $(AOBJS) $(COBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/lib_mips/Makefile b/lib_mips/Makefile index d5980e6dcd..e2ac999141 100644 --- a/lib_mips/Makefile +++ b/lib_mips/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,22 +23,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(ARCH).a +LIB = $(obj)lib$(ARCH).a -AOBJS = +SOBJS = COBJS = board.o time.o mips_linux.o -OBJS = $(AOBJS) $(COBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/lib_nios/Makefile b/lib_nios/Makefile index eff46db819..ad4c6c4650 100644 --- a/lib_nios/Makefile +++ b/lib_nios/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,22 +23,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(ARCH).a +LIB = $(obj)lib$(ARCH).a -AOBJS = +SOBJS = COBJS = board.o cache.o divmod.o nios_linux.o mult.o time.o -OBJS = $(AOBJS) $(COBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/lib_nios2/Makefile b/lib_nios2/Makefile index 44b893c9ae..1c2ac72d6a 100644 --- a/lib_nios2/Makefile +++ b/lib_nios2/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,22 +23,23 @@ include $(TOPDIR)/config.mk -LIB = lib$(ARCH).a +LIB = $(obj)lib$(ARCH).a -AOBJS = cache.o +SOBJS = cache.o COBJS = board.o divmod.o nios_linux.o mult.o time.o -OBJS = $(AOBJS) $(COBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/lib_ppc/Makefile b/lib_ppc/Makefile index 652a4199ec..bae8cbc20b 100644 --- a/lib_ppc/Makefile +++ b/lib_ppc/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,23 +23,24 @@ include $(TOPDIR)/config.mk -LIB = lib$(ARCH).a +LIB = $(obj)lib$(ARCH).a -AOBJS = ppcstring.o ticks.o +SOBJS = ppcstring.o ticks.o COBJS = board.o \ bat_rw.o cache.o extable.o kgdb.o time.o interrupts.o -OBJS = $(AOBJS) $(COBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/mkconfig b/mkconfig index 4fe6e448be..c3e4cea8d9 100755 --- a/mkconfig +++ b/mkconfig @@ -5,7 +5,7 @@ # # Parameters: Target Architecture CPU Board [VENDOR] [SOC] # -# (C) 2002 DENX Software Engineering, Wolfgang Denk +# (C) 2002-2006 DENX Software Engineering, Wolfgang Denk # APPEND=no # Default: Create new config file @@ -27,24 +27,38 @@ done echo "Configuring for ${BOARD_NAME} board..." -cd ./include - # # Create link to architecture specific headers # -rm -f asm -ln -s asm-$2 asm +if [ "$SRCTREE" != "$OBJTREE" ] ; then + mkdir -p ${OBJTREE}/include + mkdir -p ${OBJTREE}/include2 + cd ${OBJTREE}/include2 + rm -f asm + ln -s ${SRCTREE}/include/asm-$2 asm + LNPREFIX="../../include2/asm/" + cd ../include + rm -rf asm-$2 + rm -f asm + mkdir asm-$2 + ln -s asm-$2 asm +else + cd ./include + rm -f asm + ln -s asm-$2 asm +fi + rm -f asm-$2/arch if [ -z "$6" -o "$6" = "NULL" ] ; then - ln -s arch-$3 asm-$2/arch + ln -s ${LNPREFIX}arch-$3 asm-$2/arch else - ln -s arch-$6 asm-$2/arch + ln -s ${LNPREFIX}arch-$6 asm-$2/arch fi if [ "$2" = "arm" ] ; then rm -f asm-$2/proc - ln -s proc-armv asm-$2/proc + ln -s ${LNPREFIX}proc-armv asm-$2/proc fi # diff --git a/net/Makefile b/net/Makefile index 7a704898c2..6fe4002b61 100644 --- a/net/Makefile +++ b/net/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,19 +25,23 @@ include $(TOPDIR)/config.mk # CFLAGS += -DET_DEBUG -DDEBUG -LIB = libnet.a +LIB = $(obj)libnet.a + +COBJS = net.o tftp.o bootp.o rarp.o eth.o nfs.o sntp.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) -OBJS = net.o tftp.o bootp.o rarp.o eth.o nfs.o sntp.o all: $(LIB) -$(LIB): $(START) $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/post/Makefile b/post/Makefile index 4ee429de4e..228bafc6a7 100644 --- a/post/Makefile +++ b/post/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this diff --git a/post/cpu/Makefile b/post/cpu/Makefile index 43fc044822..645e83856c 100644 --- a/post/cpu/Makefile +++ b/post/cpu/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this diff --git a/post/rules.mk b/post/rules.mk index 1ad6959003..a2f33ad6ae 100644 --- a/post/rules.mk +++ b/post/rules.mk @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -23,20 +23,22 @@ include $(TOPDIR)/config.mk -OBJS = $(AOBJS) $(COBJS) +SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS)) +LIB := $(obj)$(LIB) CPPFLAGS += -I$(TOPDIR) all: $(LIB) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > .depend +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/rtc/Makefile b/rtc/Makefile index 2c5d099fee..ca5b66b7b0 100644 --- a/rtc/Makefile +++ b/rtc/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2004 +# (C) Copyright 2001-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,24 +25,27 @@ include $(TOPDIR)/config.mk #CFLAGS += -DDEBUG -LIB = librtc.a +LIB = $(obj)librtc.a -OBJS = date.o \ +COBJS = date.o \ bf533_rtc.o ds12887.o ds1302.o ds1306.o ds1307.o \ ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o \ m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \ mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + all: $(LIB) -$(LIB): $(START) $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) crv $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/rules.mk b/rules.mk new file mode 100644 index 0000000000..a77451bd7f --- /dev/null +++ b/rules.mk @@ -0,0 +1,35 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +######################################################################### + +_depend: $(obj).depend + +$(obj).depend: $(src)Makefile $(TOPDIR)/config.mk $(SRCS) + @rm -f $@ + @for f in $(SRCS); do \ + g=`basename $$f | sed -e 's/\(.*\)\.\w/\1.o/'`; \ + $(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $(obj)$$g $$f >> $@ ; \ + done + +######################################################################### diff --git a/tools/Makefile b/tools/Makefile index d3dcc7d86e..606f024037 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2003 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -21,22 +21,23 @@ # MA 02111-1307 USA # -BINS = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) +BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) -OBJS = environment.o img2srec.o mkimage.o crc32.o envcrc.o gen_eth_addr.o bmp_logo.o +OBJ_LINKS = environment.o crc32.o +OBJ_FILES = img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o ifeq ($(ARCH),mips) -BINS += inca-swap-bytes$(SFX) -OBJS += inca-swap-bytes.o +BIN_FILES += inca-swap-bytes$(SFX) +OBJ_FILES += inca-swap-bytes.o endif # Don't build by default #ifeq ($(ARCH),ppc) -#BINS += mpc86x_clk$(SFX) -#OBJS += mpc86x_clk.o +#BIN_FILES += mpc86x_clk$(SFX) +#OBJ_FILES += mpc86x_clk.o #endif -LOGO_H = $(TOPDIR)/include/bmp_logo.h +LOGO_H = $(OBJTREE)/include/bmp_logo.h ifeq ($(LOGO_BMP),) LOGO_BMP= logos/denx.bmp @@ -106,69 +107,76 @@ endif # include $(TOPDIR)/config.mk +# now $(obj) is defined +SRCS := $(addprefix $(obj),$(OBJ_LINKS:.o=.c)) $(OBJ_FILES:.o=.c) +BINS := $(addprefix $(obj),$(BIN_FILES)) + # # Use native tools and options # -CPPFLAGS = -idirafter ../include -DTEXT_BASE=$(TEXT_BASE) -DUSE_HOSTCC +CPPFLAGS = -idirafter $(SRCTREE)/include \ + -idirafter $(OBJTREE)/include2 \ + -idirafter $(OBJTREE)/include \ + -DTEXT_BASE=$(TEXT_BASE) -DUSE_HOSTCC CFLAGS = $(HOST_CFLAGS) $(CPPFLAGS) -O AFLAGS = -D__ASSEMBLY__ $(CPPFLAGS) CC = $(HOSTCC) STRIP = $(HOSTSTRIP) MAKEDEPEND = makedepend -all: .depend $(BINS) $(LOGO_H) subdirs +all: $(obj).depend $(BINS) $(LOGO_H) subdirs -envcrc$(SFX): envcrc.o crc32.o environment.o +$(obj)envcrc$(SFX): $(obj)envcrc.o $(obj)crc32.o $(obj)environment.o $(CC) $(CFLAGS) -o $@ $^ -img2srec$(SFX): img2srec.o +$(obj)img2srec$(SFX): $(obj)img2srec.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(STRIP) $@ -mkimage$(SFX): mkimage.o crc32.o +$(obj)mkimage$(SFX): $(obj)mkimage.o $(obj)crc32.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(STRIP) $@ -ncb$(SFX): ncb.o +$(obj)ncb$(SFX): $(obj)ncb.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(STRIP) $@ -gen_eth_addr$(SFX): gen_eth_addr.o +$(obj)gen_eth_addr$(SFX): $(obj)gen_eth_addr.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(STRIP) $@ -bmp_logo$(SFX): bmp_logo.o +$(obj)bmp_logo$(SFX): $(obj)bmp_logo.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(STRIP) $@ -inca-swap-bytes$(SFX): inca-swap-bytes.o +$(obj)inca-swap-bytes$(SFX): $(obj)inca-swap-bytes.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(STRIP) $@ -mpc86x_clk$(SFX): mpc86x_clk.o +$(obj)mpc86x_clk$(SFX): $(obj)mpc86x_clk.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(STRIP) $@ -envcrc.o: envcrc.c - $(CC) -g $(CFLAGS) -c $< +$(obj)envcrc.o: $(src)envcrc.c + $(CC) -g $(CFLAGS) -c -o $@ $< -crc32.o: crc32.c - $(CC) -g $(CFLAGS) -c $< +$(obj)crc32.o: $(obj)crc32.c + $(CC) -g $(CFLAGS) -c -o $@ $< -mkimage.o: mkimage.c - $(CC) -g $(CFLAGS) -c $< +$(obj)mkimage.o: $(src)mkimage.c + $(CC) -g $(CFLAGS) -c -o $@ $< -ncb.o: ncb.c - $(CC) -g $(CFLAGS) -c $< +$(obj)ncb.o: $(src)ncb.c + $(CC) -g $(CFLAGS) -c -o $@ $< -gen_eth_addr.o: gen_eth_addr.c - $(CC) -g $(CFLAGS) -c $< +$(obj)gen_eth_addr.o: $(src)gen_eth_addr.c + $(CC) -g $(CFLAGS) -c -o $@ $< -inca-swap-bytes.o: inca-swap-bytes.c - $(CC) -g $(CFLAGS) -c $< +$(obj)inca-swap-bytes.o: $(src)inca-swap-bytes.c + $(CC) -g $(CFLAGS) -c -o $@ $< -mpc86x_clk.o: mpc86x_clk.c - $(CC) -g $(CFLAGS) -c $< +$(obj)mpc86x_clk.o: $(src)mpc86x_clk.c + $(CC) -g $(CFLAGS) -c -o $@ $< subdirs: ifeq ($(TOOLSUBDIRS),) @@ -184,25 +192,25 @@ else done endif -environment.c: - @rm -f environment.c - ln -s ../common/environment.c environment.c +$(obj)environment.c: + @rm -f $(obj)environment.c + ln -s $(src)../common/environment.c $(obj)environment.c -environment.o: environment.c - $(CC) -g $(HOST_ENVIRO_CFLAGS) $(CPPFLAGS) -c $< +$(obj)environment.o: $(obj)environment.c + $(CC) -g $(HOST_ENVIRO_CFLAGS) $(CPPFLAGS) -c -o $@ $< -crc32.c: - @rm -f crc32.c - ln -s ../lib_generic/crc32.c crc32.c +$(obj)crc32.c: + @rm -f $(obj)crc32.c + ln -s $(src)../lib_generic/crc32.c $(obj)crc32.c -$(LOGO_H): bmp_logo $(LOGO_BMP) - ./bmp_logo $(LOGO_BMP) >$@ +$(LOGO_H): $(obj)bmp_logo $(LOGO_BMP) + $(obj)./bmp_logo $(LOGO_BMP) >$@ ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/tools/env/Makefile b/tools/env/Makefile index 9ce477c542..1f16768aaf 100644 --- a/tools/env/Makefile +++ b/tools/env/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -21,25 +21,28 @@ # MA 02111-1307 USA # -SOURCES := crc32.c fw_env.c fw_env_main.c -HEADERS := fw_env.h +include $(TOPDIR)/config.mk -all: fw_printenv +SRCS := $(obj)crc32.c fw_env.c fw_env_main.c +HEADERS := fw_env.h -fw_printenv: $(SOURCES) $(HEADERS) - $(CROSS_COMPILE)gcc -Wall -DUSE_HOSTCC $(SOURCES) -o fw_printenv +CPPFLAGS := -Wall -DUSE_HOSTCC + +all: $(obj)fw_printenv + +$(obj)fw_printenv: $(SRCS) $(HEADERS) + $(CROSS_COMPILE)gcc $(CPPFLAGS) $(SRCS) -o $(obj)fw_printenv clean: - rm -f fw_printenv crc32.c + rm -f $(obj)fw_printenv $(obj)crc32.c -crc32.c: - ln -s ../../lib_generic/crc32.c crc32.c +$(obj)crc32.c: + ln -s $(src)../../lib_generic/crc32.c $(obj)crc32.c ######################################################################### -.depend: Makefile $(SOURCES) - $(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -DUSE_HOSTCC $(SOURCES) > $@ +include $(TOPDIR)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/tools/gdb/Makefile b/tools/gdb/Makefile index e7618b7622..dbcb91f5ed 100644 --- a/tools/gdb/Makefile +++ b/tools/gdb/Makefile @@ -1,4 +1,7 @@ # +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# # (C) Copyright 2000 # Murray Jensen # @@ -25,7 +28,11 @@ include $(TOPDIR)/config.mk BINS = gdbsend gdbcont -OBJS = gdbsend.o gdbcont.o error.o remote.o serial.o +COBJS = gdbsend.o gdbcont.o error.o remote.o serial.o + +OBJS := $(addprefix $(obj),$(COBJS)) +SRCS := $(COBJS:.o=.c) +BINS := $(addprefix $(obj),$(BINS)) # # Use native tools and options @@ -44,26 +51,26 @@ all: else # ! CYGWIN -all: $(BINS) +all: $(obj).depend $(BINS) -gdbsend: gdbsend.o error.o remote.o serial.o +$(obj)gdbsend: $(obj)gdbsend.o $(obj)error.o $(obj)remote.o $(obj)serial.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ -gdbcont: gdbcont.o error.o remote.o serial.o +$(obj)gdbcont: $(obj)gdbcont.o $(obj)error.o $(obj)remote.o $(obj)serial.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ clean: rm -f $(OBJS) distclean: clean - rm -f $(BINS) core *.bak .depend + rm -f $(BINS) $(obj)core $(obj)*.bak $(obj).depend ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) -I../include $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/tools/updater/Makefile b/tools/updater/Makefile index 3fa1912416..e9684cb409 100644 --- a/tools/updater/Makefile +++ b/tools/updater/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,62 +25,81 @@ LOAD_ADDR = 0x40000 include $(TOPDIR)/config.mk -PROG = updater -IMAGE = updater.image -SRC = update.c flash.c flash_hw.c utils.c cmd_flash.c string.c ctype.c dummy.c -ASRC = ppcstring.S -OBJS = $(SRC:.c=.o) $(ASRC:.S=.o) +PROG = $(obj)updater +IMAGE = $(obj)updater.image -LIB = $(TOPDIR)/examples/libstubs.a -LIBAOBJS= -LIBCOBJS= $(TOPDIR)/examples/stubs.o -LIBOBJS = $(LIBAOBJS) $(LIBCOBJS) +COBJS = update.o flash.o flash_hw.o utils.o cmd_flash.o string.o ctype.o dummy.o +COBJS_LINKS = stubs.o +AOBJS = ppcstring.o +AOBJS_LINKS = memio.o + +OBJS := $(addprefix $(obj),$(COBJS) $(COBJS_LINKS) $(AOBJS) $(AOBJS_LINKS)) +SRCS := $(COBJS:.o=.c) $(AOBJS:.o=.S) $(addprefix $(obj), $(COBJS_LINKS:.o:.c) $(AOBJS_LINKS:.o:.S)) CPPFLAGS += -I$(TOPDIR) -I$(TOPDIR)/board/MAI/AmigaOneG3SE CFLAGS += -I$(TOPDIR)/board/MAI/AmigaOneG3SE +AFLAGS += -I$(TOPDIR)/board/MAI/AmigaOneG3SE + +DEPS = $(OBJTREE)/u-boot.bin $(OBJTREE)/tools/mkimage +ifneq ($(DEPS),$(wildcard $(DEPS))) +$(error "updater: Missing required objects, please run regular build first") +endif -all: .depend $(LIB) $(PROG) +all: $(obj).depend $(PROG) $(IMAGE) ######################################################################### -$(LIB): .depend $(LIBOBJS) - $(AR) crv $@ $(LIBOBJS) -%.srec: %.o $(LIB) +$(obj)%.srec: %.o $(LIB) $(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $< $(LIB) $(OBJCOPY) -O srec $(<:.o=) $@ -%.o: %.c - $(CC) $(CPPFLAGS) -c $< +$(obj)%.o: %.c + $(CC) $(CFLAGS) -c -o $@ $< + +$(obj)%.o: %.S + $(CC) $(AFLAGS) -c -o $@ $< + +$(obj)memio.o: $(obj)memio.S + $(CC) $(AFLAGS) -c -o $@ $< -%.o: %.S - $(CC) $(CPPFLAGS) -c $< +$(obj)memio.S: + rm -f $(obj)memio.c + ln -s $(SRCTREE)/board/MAI/AmigaOneG3SE/memio.S $(obj)memio.S + +$(obj)stubs.o: $(obj)stubs.c + $(CC) $(CFLAGS) -c -o $@ $< + +$(obj)stubs.c: + rm -f $(obj)stubs.c + ln -s $(SRCTREE)/examples/stubs.c $(obj)stubs.c ######################################################################### -updater: $(OBJS) $(LIB) $(TOPDIR)/board/MAI/AmigaOneG3SE/memio.o - $(LD) -g -Ttext $(LOAD_ADDR) -o updater -e _main $(OBJS) $(LIB) \ - $(TOPDIR)/board/MAI/AmigaOneG3SE/memio.o - $(OBJCOPY) -O binary updater updater.bin +$(obj)updater: $(OBJS) + $(LD) -g -Ttext $(LOAD_ADDR) -o $(obj)updater -e _main $(OBJS) + $(OBJCOPY) -O binary $(obj)updater $(obj)updater.bin -updater.image: updater $(TOPDIR)/u-boot.bin - cat >/tmp/tempimage updater.bin junk $(TOPDIR)/u-boot.bin - $(TOPDIR)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \ - -e `ppc-elf32-nm updater | grep _main | cut --bytes=0-8` \ - -n "Firmware Updater" -d /tmp/tempimage updater.image +$(obj)updater.image: $(obj)updater $(OBJTREE)/u-boot.bin + cat >/tmp/tempimage $(obj)updater.bin junk $(OBJTREE)/u-boot.bin + $(OBJTREE)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \ + -e `$(NM) $(obj)updater | grep _main | cut --bytes=0-8` \ + -n "Firmware Updater" -d /tmp/tempimage $(obj)updater.image rm /tmp/tempimage - cp updater.image /tftpboot + cp $(obj)updater.image /tftpboot -updater.image2: updater $(TOPDIR)/u-boot.bin - cat >/tmp/tempimage updater.bin junk ../../create_image/image - $(TOPDIR)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \ - -e `ppc-elf32-nm updater | grep _main | cut --bytes=0-8` \ - -n "Firmware Updater" -d /tmp/tempimage updater.image +(obj)updater.image2: $(obj)updater $(OBJTREE)/u-boot.bin + cat >/tmp/tempimage $(obj)updater.bin junk ../../create_image/image + $(OBJTREE)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \ + -e `$(NM) $(obj)updater | grep _main | cut --bytes=0-8` \ + -n "Firmware Updater" -d /tmp/tempimage $(obj)updater.image rm /tmp/tempimage - cp updater.image /tftpboot + cp $(obj)updater.image /tftpboot + +######################################################################### -.depend: Makefile $(SRC) $(ASRC) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S) - $(CC) -M $(CFLAGS) $(SRC) $(ASRC) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### -- cgit v1.2.3 From 360b4103677b27ad4018174a1d186218969d83a1 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 3 Sep 2006 18:17:46 +0200 Subject: Fixed problems on PRS200 board caused by adding splash screen on MCC200 --- CHANGELOG | 2 ++ include/configs/mcc200.h | 41 ++++++++++++++++++++++------------------- 2 files changed, 24 insertions(+), 19 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 5e6e1f3684..5743bbc392 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fixed problems on PRS200 board caused by adding splash screen on MCC200 + * Extended README entry on coding style * Added another example showing simple interrupt interception. diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index e95d68bfb8..0c935bfcea 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -37,12 +37,12 @@ #define CONFIG_MISC_INIT_R -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* @@ -92,7 +92,7 @@ /* USB */ #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE /* @@ -167,7 +167,7 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ /* * I2C configuration @@ -183,9 +183,9 @@ * TEXT base always at 0xFFF00000 * ENV_ADDR always at 0xFFF40000 * FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!) - * 0xFE000000 for 32 MB - * 0xFF000000 for 16 MB - * 0xFF800000 for 8 MB + * 0xFE000000 for 32 MB + * 0xFF000000 for 16 MB + * 0xFF800000 for 8 MB */ #define CFG_FLASH_BASE 0xfc000000 #define CFG_FLASH_SIZE 0x04000000 @@ -207,9 +207,9 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ -#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -239,7 +239,7 @@ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_BASE TEXT_BASE #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) # define CFG_RAMBOOT 1 #endif @@ -261,11 +261,14 @@ /* * LCD Splash Screen */ +#if !defined(CONFIG_PRS200) #define CONFIG_LCD 1 +#endif + #if defined(CONFIG_LCD) #define CONFIG_SPLASH_SCREEN 1 #define CFG_CONSOLE_IS_IN_ENV 1 -#define LCD_BPP LCD_MONOCHROME +#define LCD_BPP LCD_MONOCHROME #endif /* @@ -283,18 +286,18 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ #define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ #define CFG_LOAD_ADDR 0x100000 /* default load address */ -- cgit v1.2.3 From f60ba0d35e13e9dcf839d4563f9436d07468b1ef Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 4 Sep 2006 02:01:27 +0200 Subject: Fix build problems on sorcery board. --- CHANGELOG | 2 ++ board/sorcery/sorcery.c | 2 +- cpu/mpc8220/pci.c | 2 +- include/configs/sorcery.h | 1 + 4 files changed, 5 insertions(+), 2 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index be18ac206c..a288465b3b 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix build problems on sorcery board. + * Fix coldfire build problems. Patch by Marian Balakowicz, 01 Sep 2006 diff --git a/board/sorcery/sorcery.c b/board/sorcery/sorcery.c index 35d6a06084..165e9e2999 100644 --- a/board/sorcery/sorcery.c +++ b/board/sorcery/sorcery.c @@ -33,7 +33,7 @@ long int initdram (int board_type) size = dramSetup (); - return get_ram_size((ulong *)CFG_SDRAM_BASE, size); + return get_ram_size(CFG_SDRAM_BASE, size); } int checkboard (void) diff --git a/cpu/mpc8220/pci.c b/cpu/mpc8220/pci.c index ca4a04d21e..4ef214e540 100644 --- a/cpu/mpc8220/pci.c +++ b/cpu/mpc8220/pci.c @@ -170,7 +170,7 @@ pci_mpc8220_init(struct pci_controller *hose) hose->region_count = 3; hose->cfg_addr = &(xcpci->cfg_adr); - hose->cfg_data = CONFIG_PCI_CFG_BUS; + hose->cfg_data = (volatile unsigned char *)CONFIG_PCI_CFG_BUS; pci_set_ops(hose, mpc8220_pci_read_config_byte, diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h index 3d907f888c..4937638820 100644 --- a/include/configs/sorcery.h +++ b/include/configs/sorcery.h @@ -261,6 +261,7 @@ #define CONFIG_MPC8220_FEC 1 #define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ #define CONFIG_PHY_ADDR 0x1F +#define CONFIG_MII 1 /* * Miscellaneous configurable options -- cgit v1.2.3 From 0dab03ba8fb20ede7233f497b6c6db188986e7a8 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 6 Sep 2006 23:29:15 +0200 Subject: Fix mkimage -l bug with multifile images on 64bit platforms Patch by David Updegraff, 06 Sep 2006 --- CHANGELOG | 3 +++ tools/mkimage.c | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/CHANGELOG b/CHANGELOG index a288465b3b..3c42d93fe8 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix mkimage -l bug with multifile images on 64bit platforms + Patch by David Updegraff, 06 Sep 2006 + * Fix build problems on sorcery board. * Fix coldfire build problems. diff --git a/tools/mkimage.c b/tools/mkimage.c index fea3e5bc6b..60aac79f23 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -632,7 +632,7 @@ print_header (image_header_t *hdr) if (hdr->ih_type == IH_TYPE_MULTI || hdr->ih_type == IH_TYPE_SCRIPT) { int i, ptrs; uint32_t pos; - unsigned long *len_ptr = (unsigned long *) ( + uint32_t *len_ptr = (uint32_t *) ( (unsigned long)hdr + sizeof(image_header_t) ); -- cgit v1.2.3 From 887e2ec9ecf49366a60a49b32b73825804909865 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 7 Sep 2006 11:51:23 +0200 Subject: Add support for AMCC Sequoia PPC440EPx eval board - Add support for PPC440EPx & PPC440GRx - Add support for PPC440EP(x)/GR(x) NAND controller in cpu/ppc4xx directory - Add NAND boot functionality for Sequoia board, please see doc/README.nand-boot-ppc440 for details - This Sequoia NAND image doesn't support environment in NAND for now. This will be added in a short while. Patch by Stefan Roese, 07 Sep 2006 --- CHANGELOG | 10 + MAINTAINERS | 1 + MAKEALL | 9 +- Makefile | 39 ++- board/amcc/sequoia/Makefile | 52 +++ board/amcc/sequoia/config.mk | 41 +++ board/amcc/sequoia/init.S | 157 +++++++++ board/amcc/sequoia/sdram.c | 83 +++++ board/amcc/sequoia/sequoia.c | 552 ++++++++++++++++++++++++++++++ board/amcc/sequoia/sequoia.h | 67 ++++ board/amcc/sequoia/u-boot-nand.lds | 131 +++++++ board/amcc/sequoia/u-boot.lds | 145 ++++++++ common/cmd_bdinfo.c | 6 +- config.mk | 4 + cpu/ppc4xx/405gp_pci.c | 3 +- cpu/ppc4xx/4xx_enet.c | 184 ++++++++-- cpu/ppc4xx/Makefile | 2 +- cpu/ppc4xx/cpu.c | 109 +++++- cpu/ppc4xx/interrupts.c | 57 ++- cpu/ppc4xx/miiphy.c | 14 +- cpu/ppc4xx/ndfc.c | 173 ++++++++++ cpu/ppc4xx/serial.c | 263 +++++--------- cpu/ppc4xx/speed.c | 3 +- cpu/ppc4xx/start.S | 128 ++++++- cpu/ppc4xx/usb_ohci.c | 8 +- cpu/ppc4xx/usbdev.c | 20 +- cpu/ppc4xx/vecnum.h | 89 ++++- doc/README.nand-boot-ppc440 | 36 ++ dtt/lm75.c | 5 + include/405_mal.h | 2 +- include/440_i2c.h | 3 +- include/asm-ppc/processor.h | 4 + include/asm-ppc/u-boot.h | 3 +- include/configs/bamboo.h | 1 + include/configs/pcs440ep.h | 1 + include/configs/sequoia.h | 431 +++++++++++++++++++++++ include/configs/yellowstone.h | 1 + include/configs/yosemite.h | 1 + include/linux/mtd/compat.h | 2 + include/linux/mtd/ndfc.h | 67 ++++ include/ppc440.h | 609 +++++++++++++++++++++++++++++++-- include/ppc4xx_enet.h | 22 +- include/ppc_asm.tmpl | 2 +- lib_ppc/board.c | 12 +- nand_spl/board/amcc/sequoia/Makefile | 83 +++++ nand_spl/board/amcc/sequoia/config.mk | 49 +++ nand_spl/board/amcc/sequoia/u-boot.lds | 65 ++++ nand_spl/nand_boot.c | 178 ++++++++++ 48 files changed, 3606 insertions(+), 321 deletions(-) create mode 100644 board/amcc/sequoia/Makefile create mode 100644 board/amcc/sequoia/config.mk create mode 100644 board/amcc/sequoia/init.S create mode 100644 board/amcc/sequoia/sdram.c create mode 100644 board/amcc/sequoia/sequoia.c create mode 100644 board/amcc/sequoia/sequoia.h create mode 100644 board/amcc/sequoia/u-boot-nand.lds create mode 100644 board/amcc/sequoia/u-boot.lds create mode 100644 cpu/ppc4xx/ndfc.c create mode 100644 doc/README.nand-boot-ppc440 create mode 100644 include/configs/sequoia.h create mode 100644 include/linux/mtd/ndfc.h create mode 100644 nand_spl/board/amcc/sequoia/Makefile create mode 100644 nand_spl/board/amcc/sequoia/config.mk create mode 100644 nand_spl/board/amcc/sequoia/u-boot.lds create mode 100644 nand_spl/nand_boot.c diff --git a/CHANGELOG b/CHANGELOG index 3c42d93fe8..576cd7fb86 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,16 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add support for AMCC Sequoia PPC440EPx eval board + - Add support for PPC440EPx & PPC440GRx + - Add support for PPC440EP(x)/GR(x) NAND controller + in cpu/ppc4xx directory + - Add NAND boot functionality for Sequoia board, + please see doc/README.nand-boot-ppc440 for details + - This Sequoia NAND image doesn't support environment + in NAND for now. This will be added in a short while. + Patch by Stefan Roese, 07 Sep 2006 + * Fix mkimage -l bug with multifile images on 64bit platforms Patch by David Updegraff, 06 Sep 2006 diff --git a/MAINTAINERS b/MAINTAINERS index 0c4cfb43cf..42627196f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -285,6 +285,7 @@ Stefan Roese ocotea PPC440GX p3p440 PPC440GP pcs440ep PPC440EP + sequoia PPC440EPx sycamore PPC405GPr walnut PPC405GP yellowstone PPC440GR diff --git a/MAKEALL b/MAKEALL index d2f86d3ac8..8039f3d708 100755 --- a/MAKEALL +++ b/MAKEALL @@ -13,7 +13,7 @@ if [ "${MAKEALL_LOGDIR}" ] ; then else LOG_DIR="LOG" fi - + if [ ! "${BUILD_DIR}" ] ; then BUILD_DIR="." fi @@ -85,9 +85,10 @@ LIST_4xx=" \ ML2 ml300 ocotea OCRTC \ ORSG p3p440 PCI405 pcs440ep \ PIP405 PLU405 PMC405 PPChameleonEVB \ - sbc405 VOH405 VOM405 W7OLMC \ - W7OLMG walnut WUH405 XPEDITE1K \ - yellowstone yosemite yucca bamboo \ + sbc405 sequoia sequoia_nand VOH405 \ + VOM405 W7OLMC W7OLMG walnut \ + WUH405 XPEDITE1K yellowstone yosemite \ + yucca bamboo \ " ######################################################################### diff --git a/Makefile b/Makefile index fc7b117e3f..a63aaef15b 100644 --- a/Makefile +++ b/Makefile @@ -48,7 +48,7 @@ VENDOR= # # U-boot build supports producing a object files to the separate external # directory. Two use cases are supported: -# +# # 1) Add O= to the make command line # 'make O=/tmp/build all' # @@ -59,12 +59,12 @@ VENDOR= # The second approach can also be used with a MAKEALL script # 'export BUILD_DIR=/tmp/build' # './MAKEALL' -# +# # Command line 'O=' setting overrides BUILD_DIR environent variable. -# +# # When none of the above methods is used the local build is performed and # the object files are placed in the source directory. -# +# ifdef O ifeq ("$(origin O)", "command line") @@ -101,7 +101,7 @@ src := $(SRCTREE)/ else obj := src := -endif +endif export obj src ######################################################################### @@ -214,13 +214,18 @@ SUBDIRS = tools \ post/cpu .PHONY : $(SUBDIRS) +ifeq ($(CONFIG_NAND_U_BOOT),y) +NAND_SPL = nand_spl +U_BOOT_NAND = $(obj)u-boot-nand.bin +endif + __OBJS := $(subst $(obj),,$(OBJS)) __LIBS := $(subst $(obj),,$(LIBS)) ######################################################################### ######################################################################### -ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map +ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) all: $(ALL) @@ -258,6 +263,12 @@ $(LIBS): $(SUBDIRS): $(MAKE) -C $@ all +$(NAND_SPL): version + $(MAKE) -C nand_spl all + +$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin + cat nand_spl/u-boot-spl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin + version: @echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \ echo -n "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \ @@ -309,7 +320,8 @@ endif ######################################################################### unconfig: - @rm -f $(obj)include/config.h $(obj)include/config.mk $(obj)board/*/config.tmp + @rm -f $(obj)include/config.h $(obj)include/config.mk \ + $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp #======================================================================== # PowerPC @@ -1128,6 +1140,17 @@ PPChameleonEVB_HI_33_config: unconfig sbc405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 +sequoia_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx sequoia amcc + +sequoia_nand_config: unconfig + @ln -s board/amcc/sequoia/Makefile nand_spl/Makefile + @echo "#define CONFIG_NAND_U_BOOT" >include/config.h + @echo "Compile NAND boot image for sequoia" + @$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc + @echo "TEXT_BASE = 0x01000000" >board/amcc/sequoia/config.tmp + @echo "CONFIG_NAND_U_BOOT = y" >> include/config.mk + sycamore_config: unconfig @echo "Configuring for sycamore board as subset of walnut..." @$(MKCONFIG) -a walnut ppc ppc4xx walnut amcc @@ -2195,6 +2218,8 @@ clean: rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds rm -f $(obj)include/bmp_logo.h + find nand_spl -lname "*" -print | xargs rm -f + rm -f nand_spl/u-boot-spl nand_spl/u-boot-spl.map clobber: clean find $(OBJTREE) -type f \( -name .depend \ diff --git a/board/amcc/sequoia/Makefile b/board/amcc/sequoia/Makefile new file mode 100644 index 0000000000..b29c04a0d9 --- /dev/null +++ b/board/amcc/sequoia/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2002-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk +include $(TOPDIR)/include/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o sdram.o +SOBJS = init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk new file mode 100644 index 0000000000..7713a72be8 --- /dev/null +++ b/board/amcc/sequoia/config.mk @@ -0,0 +1,41 @@ +# +# (C) Copyright 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# AMCC 440EPx Reference Platform (Sequoia) board +# + +sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE +TEXT_BASE = 0xFFFA0000 +endif + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S new file mode 100644 index 0000000000..3d4ac8543d --- /dev/null +++ b/board/amcc/sequoia/init.S @@ -0,0 +1,157 @@ +/* + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +/* General */ +#define TLB_VALID 0x00000200 +#define _256M 0x10000000 + +/* Supported page sizes */ + +#define SZ_1K 0x00000000 +#define SZ_4K 0x00000010 +#define SZ_16K 0x00000020 +#define SZ_64K 0x00000030 +#define SZ_256K 0x00000040 +#define SZ_1M 0x00000050 +#define SZ_8M 0x00000060 +#define SZ_16M 0x00000070 +#define SZ_256M 0x00000090 + +/* Storage attributes */ +#define SA_W 0x00000800 /* Write-through */ +#define SA_I 0x00000400 /* Caching inhibited */ +#define SA_M 0x00000200 /* Memory coherence */ +#define SA_G 0x00000100 /* Guarded */ +#define SA_E 0x00000080 /* Endian */ + +/* Access control */ +#define AC_X 0x00000024 /* Execute */ +#define AC_W 0x00000012 /* Write */ +#define AC_R 0x00000009 /* Read */ + +/* Some handy macros */ + +#define EPN(e) ((e) & 0xfffffc00) +#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) +#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) +#define TLB2(a) ( (a)&0x00000fbf ) + +#define tlbtab_start\ + mflr r1 ;\ + bl 0f ; + +#define tlbtab_end\ + .long 0, 0, 0 ; \ +0: mflr r0 ; \ + mtlr r1 ; \ + blr ; + +#define tlbentry(epn,sz,rpn,erpn,attr)\ + .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) + + +/************************************************************************** + * TLB TABLE + * + * This table is used by the cpu boot code to setup the initial tlb + * entries. Rather than make broad assumptions in the cpu source tree, + * this table lets each board set things up however they like. + * + * Pointer to the table is returned in r1 + * + *************************************************************************/ + .section .bootpg,"ax" + .globl tlbtab + +tlbtab: + tlbtab_start + + /* + * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the + * speed up boot process. It is patched after relocation to enable SA_I + */ +#ifndef CONFIG_NAND_SPL + tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G ) +#else + tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G ) +#endif + + /* TLB-entry for DDR SDRAM (Up to 2GB) */ + tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) + +#ifdef CFG_INIT_RAM_DCACHE + /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ + tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) +#endif + + /* TLB-entry for PCI Memory */ + tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I ) + + /* TLB-entry for EBC */ + tlbentry( CFG_BCSR_BASE, SZ_1K, CFG_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + + /* TLB-entry for NAND */ + tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + + /* TLB-entry for Internal Registers & OCM */ + tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I ) + + /*TLB-entry PCI registers*/ + tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + + /* TLB-entry for peripherals */ + tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + + tlbtab_end + +#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) + /* + * For NAND booting the first TLB has to be reconfigured to full size + * and with caching disabled after running from RAM! + */ +#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M) +#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 1) +#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I) + + .globl reconfig_tlb0 +reconfig_tlb0: + sync + isync + addi r4,r0,0x0000 /* TLB entry #0 */ + lis r5,TLB00@h + ori r5,r5,TLB00@l + tlbwe r5,r4,0x0000 /* Save it out */ + lis r5,TLB01@h + ori r5,r5,TLB01@l + tlbwe r5,r4,0x0001 /* Save it out */ + lis r5,TLB02@h + ori r5,r5,TLB02@l + tlbwe r5,r4,0x0002 /* Save it out */ + sync + isync + blr +#endif diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c new file mode 100644 index 0000000000..a62648bb5f --- /dev/null +++ b/board/amcc/sequoia/sdram.c @@ -0,0 +1,83 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/************************************************************************* + * + * initdram -- 440EPx's DDR controller is a DENALI Core + * + ************************************************************************/ +long int initdram (int board_type) +{ +#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) + volatile ulong val; + + mtsdram(DDR0_02, 0x00000000); + + /* + * Soft-reset SDRAM controller + */ + mtsdr(sdr_srst, SDR0_SRST0_DMC); + mtsdr(sdr_srst, 0x00000000); + + mtsdram(DDR0_00, 0x0000190A); + mtsdram(DDR0_01, 0x01000000); + mtsdram(DDR0_03, 0x02030602); + mtsdram(DDR0_04, 0x13030300); + mtsdram(DDR0_05, 0x0202050E); + mtsdram(DDR0_06, 0x0104C823); + mtsdram(DDR0_07, 0x000D0100); + mtsdram(DDR0_08, 0x02360001); + mtsdram(DDR0_09, 0x00011D5F); + mtsdram(DDR0_10, 0x00000300); + mtsdram(DDR0_11, 0x0027C800); + mtsdram(DDR0_12, 0x00000003); + mtsdram(DDR0_14, 0x00000000); + mtsdram(DDR0_17, 0x19000000); + mtsdram(DDR0_18, 0x19191919); + mtsdram(DDR0_19, 0x19191919); + mtsdram(DDR0_20, 0x0B0B0B0B); + mtsdram(DDR0_21, 0x0B0B0B0B); + mtsdram(DDR0_22, 0x00267F0B); + mtsdram(DDR0_23, 0x00000000); + mtsdram(DDR0_24, 0x01010002); + mtsdram(DDR0_26, 0x5B260181); + mtsdram(DDR0_27, 0x0000682B); + mtsdram(DDR0_28, 0x00000000); + mtsdram(DDR0_31, 0x00000000); + mtsdram(DDR0_42, 0x01000006); + mtsdram(DDR0_43, 0x050A0200); + mtsdram(DDR0_44, 0x00000005); + mtsdram(DDR0_02, 0x00000001); + + /* + * Wait for DCC master delay line to finish calibration + */ + mfsdram(DDR0_17, val); + while (((val >> 8) & 0x000007f) == 0) { + mfsdram(DDR0_17, val); + } +#endif /* #ifndef CONFIG_NAND_U_BOOT */ + + return (CFG_MBYTES_SDRAM << 20); +} diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c new file mode 100644 index 0000000000..95734b9c57 --- /dev/null +++ b/board/amcc/sequoia/sequoia.c @@ -0,0 +1,552 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2006 + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include "sequoia.h" + +DECLARE_GLOBAL_DATA_PTR; + +extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +int board_early_init_f(void) +{ + unsigned long sdr0_cust0; + unsigned long sdr0_pfc1, sdr0_pfc2; + register uint reg; + + mtdcr(ebccfga, xbcfg); + mtdcr(ebccfgd, 0xb8400000); + + /*-------------------------------------------------------------------- + * Setup the GPIO pins + *-------------------------------------------------------------------*/ + /* test-only: take GPIO init from pcs440ep ???? in config file */ + out32(GPIO0_OR, 0x00000000); + out32(GPIO0_TCR, 0x0000000f); + out32(GPIO0_OSRL, 0x50015400); + out32(GPIO0_OSRH, 0x550050aa); + out32(GPIO0_TSRL, 0x50015400); + out32(GPIO0_TSRH, 0x55005000); + out32(GPIO0_ISR1L, 0x50000000); + out32(GPIO0_ISR1H, 0x00000000); + out32(GPIO0_ISR2L, 0x00000000); + out32(GPIO0_ISR2H, 0x00000100); + out32(GPIO0_ISR3L, 0x00000000); + out32(GPIO0_ISR3H, 0x00000000); + + out32(GPIO1_OR, 0x00000000); + out32(GPIO1_TCR, 0xc2000000); + out32(GPIO1_OSRL, 0x5c280000); + out32(GPIO1_OSRH, 0x00000000); + out32(GPIO1_TSRL, 0x0c000000); + out32(GPIO1_TSRH, 0x00000000); + out32(GPIO1_ISR1L, 0x00005550); + out32(GPIO1_ISR1H, 0x00000000); + out32(GPIO1_ISR2L, 0x00050000); + out32(GPIO1_ISR2H, 0x00000000); + out32(GPIO1_ISR3L, 0x01400000); + out32(GPIO1_ISR3H, 0x00000000); + + /*-------------------------------------------------------------------- + * Setup the interrupt controller polarities, triggers, etc. + *-------------------------------------------------------------------*/ + mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(uic0er, 0x00000000); /* disable all */ + mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ + mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */ + mtdcr(uic0tr, 0x00000000); /* per ref-board manual */ + mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(uic0sr, 0xffffffff); /* clear all */ + + mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(uic1er, 0x00000000); /* disable all */ + mtdcr(uic1cr, 0x00000000); /* all non-critical */ + mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */ + mtdcr(uic1tr, 0x00000000); /* per ref-board manual */ + mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(uic1sr, 0xffffffff); /* clear all */ + + mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(uic2er, 0x00000000); /* disable all */ + mtdcr(uic2cr, 0x00000000); /* all non-critical */ + mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */ + mtdcr(uic2tr, 0x00000000); /* per ref-board manual */ + mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(uic2sr, 0xffffffff); /* clear all */ + + /* 50MHz tmrclk */ + *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00; + + /* clear write protects */ + *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00; + + /* enable Ethernet */ + *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00; + + /* enable USB device */ + *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20; + + /* select Ethernet pins */ + mfsdr(SDR0_PFC1, sdr0_pfc1); + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4; + mfsdr(SDR0_PFC2, sdr0_pfc2); + sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4; + mtsdr(SDR0_PFC2, sdr0_pfc2); + mtsdr(SDR0_PFC1, sdr0_pfc1); + + /* PCI arbiter enabled */ + mfsdr(sdr_pci0, reg); + mtsdr(sdr_pci0, 0x80000000 | reg); + + /* setup NAND FLASH */ + mfsdr(SDR0_CUST0, sdr0_cust0); + sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL | + SDR0_CUST0_NDFC_ENABLE | + SDR0_CUST0_NDFC_BW_8_BIT | + SDR0_CUST0_NDFC_ARE_MASK | + (0x80000000 >> (28 + CFG_NAND_CS)); + mtsdr(SDR0_CUST0, sdr0_cust0); + + return 0; +} + +/*---------------------------------------------------------------------------+ + | misc_init_r. + +---------------------------------------------------------------------------*/ +int misc_init_r(void) +{ + uint pbcr; + int size_val = 0; + unsigned long usb2d0cr = 0; + unsigned long usb2phy0cr, usb2h0cr = 0; + unsigned long sdr0_pfc1; + char *act = getenv("usbact"); + + /* + * FLASH stuff... + */ + + /* Re-do sizing to get full correct info */ +#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) + mtdcr(ebccfga, pb3cr); +#else + mtdcr(ebccfga, pb0cr); +#endif + pbcr = mfdcr(ebccfgd); + switch (gd->bd->bi_flashsize) { + case 1 << 20: + size_val = 0; + break; + case 2 << 20: + size_val = 1; + break; + case 4 << 20: + size_val = 2; + break; + case 8 << 20: + size_val = 3; + break; + case 16 << 20: + size_val = 4; + break; + case 32 << 20: + size_val = 5; + break; + case 64 << 20: + size_val = 6; + break; + case 128 << 20: + size_val = 7; + break; + } + pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); +#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) + mtdcr(ebccfga, pb3cr); +#else + mtdcr(ebccfga, pb0cr); +#endif + mtdcr(ebccfgd, pbcr); + + /* adjust flash start and offset */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + +#ifdef CFG_ENV_IS_IN_FLASH + /* Monitor protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + -CFG_MONITOR_LEN, + 0xffffffff, + &flash_info[0]); + + /* Env protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); +#endif + + /* + * USB suff... + */ + if (act == NULL || strcmp(act, "hostdev") == 0) { + /* SDR Setting */ + mfsdr(SDR0_PFC1, sdr0_pfc1); + mfsdr(SDR0_USB0, usb2d0cr); + mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mfsdr(SDR0_USB2H0CR, usb2h0cr); + + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/ + + /* An 8-bit/60MHz interface is the only possible alternative + when connecting the Device to the PHY */ + usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; + usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/ + + /* To enable the USB 2.0 Device function through the UTMI interface */ + usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; + usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; /*1*/ + + sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; + sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0*/ + + mtsdr(SDR0_PFC1, sdr0_pfc1); + mtsdr(SDR0_USB0, usb2d0cr); + mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mtsdr(SDR0_USB2H0CR, usb2h0cr); + + /*clear resets*/ + udelay (1000); + mtsdr(SDR0_SRST1, 0x00000000); + udelay (1000); + mtsdr(SDR0_SRST0, 0x00000000); + + printf("USB: Host(int phy) Device(ext phy)\n"); + + } else if (strcmp(act, "dev") == 0) { + /*-------------------PATCH-------------------------------*/ + mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); + + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/ + mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); + + udelay (1000); + mtsdr(SDR0_SRST1, 0x672c6000); + + udelay (1000); + mtsdr(SDR0_SRST0, 0x00000080); + + udelay (1000); + mtsdr(SDR0_SRST1, 0x60206000); + + *(unsigned int *)(0xe0000350) = 0x00000001; + + udelay (1000); + mtsdr(SDR0_SRST1, 0x60306000); + /*-------------------PATCH-------------------------------*/ + + /* SDR Setting */ + mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mfsdr(SDR0_USB2H0CR, usb2h0cr); + mfsdr(SDR0_USB0, usb2d0cr); + mfsdr(SDR0_PFC1, sdr0_pfc1); + + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0*/ + + usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; + usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0*/ + + usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; + usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; /*0*/ + + sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; + sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1*/ + + mtsdr(SDR0_USB2H0CR, usb2h0cr); + mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mtsdr(SDR0_USB0, usb2d0cr); + mtsdr(SDR0_PFC1, sdr0_pfc1); + + /*clear resets*/ + udelay (1000); + mtsdr(SDR0_SRST1, 0x00000000); + udelay (1000); + mtsdr(SDR0_SRST0, 0x00000000); + + printf("USB: Device(int phy)\n"); + } + + return 0; +} + +int checkboard(void) +{ + char *s = getenv("serial#"); + + printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board"); + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return (0); +} + +#if defined(CFG_DRAM_TEST) +int testdram(void) +{ + unsigned long *mem = (unsigned long *)0; + const unsigned long kend = (1024 / sizeof(unsigned long)); + unsigned long k, n; + + mtmsr(0); + + for (k = 0; k < CFG_MBYTES_SDRAM; + ++k, mem += (1024 / sizeof(unsigned long))) { + if ((k & 1023) == 0) { + printf("%3d MB\r", k / 1024); + } + + memset(mem, 0xaaaaaaaa, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0xaaaaaaaa) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + + memset(mem, 0x55555555, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0x55555555) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + } + printf("SDRAM test passes\n"); + return 0; +} +#endif + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +int pci_pre_init(struct pci_controller *hose) +{ + unsigned long addr; +#if 0 + /*--------------------------------------------------------------------------+ + * Cactus is always configured as the host & requires the + * PCI arbiter to be enabled ??? + *--------------------------------------------------------------------------*/ + unsigned long strap; + mfsdr(sdr_sdstp1, strap); + if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) { + printf("PCI: SDR0_STRP1[PAE] not set.\n"); + printf("PCI: Configuration aborted.\n"); + return 0; + } +#endif + + /*-------------------------------------------------------------------------+ + | Set priority for all PLB3 devices to 0. + | Set PLB3 arbiter to fair mode. + +-------------------------------------------------------------------------*/ + mfsdr(sdr_amp1, addr); + mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(plb3_acr); + mtdcr(plb3_acr, addr | 0x80000000); + + /*-------------------------------------------------------------------------+ + | Set priority for all PLB4 devices to 0. + +-------------------------------------------------------------------------*/ + mfsdr(sdr_amp0, addr); + mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ + mtdcr(plb4_acr, addr); + + /*-------------------------------------------------------------------------+ + | Set Nebula PLB4 arbiter to fair mode. + +-------------------------------------------------------------------------*/ + /* Segment0 */ + addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; + addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; + addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; + addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; + mtdcr(plb0_acr, addr); + + /* Segment1 */ + addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; + addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; + addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; + addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; + mtdcr(plb1_acr, addr); + + return 1; +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ + +/************************************************************************* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller *hose) +{ + /*--------------------------------------------------------------------------+ + * Set up Direct MMIO registers + *--------------------------------------------------------------------------*/ + /*--------------------------------------------------------------------------+ + | PowerPC440EPX PCI Master configuration. + | Map one 1Gig range of PLB/processor addresses to PCI memory space. + | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF + | Use byte reversed out routines to handle endianess. + | Make this region non-prefetchable. + +--------------------------------------------------------------------------*/ + out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ + out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ + out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ + + /*--------------------------------------------------------------------------+ + * Set up Configuration registers + *--------------------------------------------------------------------------*/ + + /* Program the board's subsystem id/vendor id */ + pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, + CFG_PCI_SUBSYS_VENDORID); + pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID); + + /* Configure command register as bus master */ + pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); + + /* 240nS PCI clock */ + pci_write_config_word(0, PCI_LATENCY_TIMER, 1); + + /* No error reporting */ + pci_write_config_word(0, PCI_ERREN, 0); + + pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); + +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + +/************************************************************************* + * pci_master_init + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) +void pci_master_init(struct pci_controller *hose) +{ + unsigned short temp_short; + + /*--------------------------------------------------------------------------+ + | Write the PowerPC440 EP PCI Configuration regs. + | Enable PowerPC440 EP to be a master on the PCI bus (PMM). + | Enable PowerPC440 EP to act as a PCI memory target (PTM). + +--------------------------------------------------------------------------*/ + pci_read_config_word(0, PCI_COMMAND, &temp_short); + pci_write_config_word(0, PCI_COMMAND, + temp_short | PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ + +/************************************************************************* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + /* Cactus is always configured as host. */ + return (1); +} +#endif /* defined(CONFIG_PCI) */ diff --git a/board/amcc/sequoia/sequoia.h b/board/amcc/sequoia/sequoia.h new file mode 100644 index 0000000000..1d44b16464 --- /dev/null +++ b/board/amcc/sequoia/sequoia.h @@ -0,0 +1,67 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2006 + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +/*----------------------------------------------------------------------------+ + | EBC Configuration Register - EBC0_CFG + +----------------------------------------------------------------------------*/ +/* External Bus Three-State Control */ +#define EBC0_CFG_EBTC_DRIVEN 0x80000000 +/* Device-Paced Time-out Disable */ +#define EBC0_CFG_PTD_ENABLED 0x00000000 +/* Ready Timeout Count */ +#define EBC0_CFG_RTC_MASK 0x38000000 +#define EBC0_CFG_RTC_16PERCLK 0x00000000 +#define EBC0_CFG_RTC_32PERCLK 0x08000000 +#define EBC0_CFG_RTC_64PERCLK 0x10000000 +#define EBC0_CFG_RTC_128PERCLK 0x18000000 +#define EBC0_CFG_RTC_256PERCLK 0x20000000 +#define EBC0_CFG_RTC_512PERCLK 0x28000000 +#define EBC0_CFG_RTC_1024PERCLK 0x30000000 +#define EBC0_CFG_RTC_2048PERCLK 0x38000000 +/* External Master Priority Low */ +#define EBC0_CFG_EMPL_LOW 0x00000000 +#define EBC0_CFG_EMPL_MEDIUM_LOW 0x02000000 +#define EBC0_CFG_EMPL_MEDIUM_HIGH 0x04000000 +#define EBC0_CFG_EMPL_HIGH 0x06000000 +/* External Master Priority High */ +#define EBC0_CFG_EMPH_LOW 0x00000000 +#define EBC0_CFG_EMPH_MEDIUM_LOW 0x00800000 +#define EBC0_CFG_EMPH_MEDIUM_HIGH 0x01000000 +#define EBC0_CFG_EMPH_HIGH 0x01800000 +/* Chip Select Three-State Control */ +#define EBC0_CFG_CSTC_DRIVEN 0x00400000 +/* Burst Prefetch */ +#define EBC0_CFG_BPF_ONEDW 0x00000000 +#define EBC0_CFG_BPF_TWODW 0x00100000 +#define EBC0_CFG_BPF_FOURDW 0x00200000 +/* External Master Size */ +#define EBC0_CFG_EMS_8BIT 0x00000000 +/* Power Management Enable */ +#define EBC0_CFG_PME_DISABLED 0x00000000 +#define EBC0_CFG_PME_ENABLED 0x00020000 +/* Power Management Timer */ +#define EBC0_CFG_PMT_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12) + +#define SDR0_USB0 0x0320 /* USB Control Register */ diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds new file mode 100644 index 0000000000..c3d3d968fe --- /dev/null +++ b/board/amcc/sequoia/u-boot-nand.lds @@ -0,0 +1,131 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + _end = . ; + PROVIDE (end = .); +} diff --git a/board/amcc/sequoia/u-boot.lds b/board/amcc/sequoia/u-boot.lds new file mode 100644 index 0000000000..a423f98285 --- /dev/null +++ b/board/amcc/sequoia/u-boot.lds @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + + _end = . ; + PROVIDE (end = .); +} diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 256e4bc796..70de795dee 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -62,11 +62,13 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ - defined(CONFIG_440SP) + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) print_str ("procfreq", strmhz(buf, bd->bi_procfreq)); print_str ("plb_busfreq", strmhz(buf, bd->bi_plb_busfreq)); #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \ - defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE) + defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) print_str ("pci_busfreq", strmhz(buf, bd->bi_pci_busfreq)); #endif #else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440EP CONFIG_440GR */ diff --git a/config.mk b/config.mk index 3ed7107fb8..0f5d0f43d9 100644 --- a/config.mk +++ b/config.mk @@ -132,8 +132,12 @@ DBGFLAGS= -g # -DDEBUG OPTFLAGS= -Os #-fomit-frame-pointer ifndef LDSCRIPT #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug +ifeq ($(CONFIG_NAND_U_BOOT),y) +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds +else LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds endif +endif OBJCFLAGS += --gap-fill=0xff gccincdir := $(shell $(CC) -print-file-name=include) diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 0b0686bcf7..03128d3f6d 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -555,7 +555,8 @@ void pci_440_init (struct pci_controller *hose) #ifdef CONFIG_PCI_SCAN_SHOW printf("PCI: Bus Dev VenId DevId Class Int\n"); #endif -#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) +#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \ + !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER); #endif hose->last_busno = pci_hose_scan(hose); diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index fab65aff78..5b1c17c351 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -130,7 +130,17 @@ #define BI_PHYMODE_NONE 0 #define BI_PHYMODE_ZMII 1 #define BI_PHYMODE_RGMII 2 +#define BI_PHYMODE_GMII 3 +#define BI_PHYMODE_RTBI 4 +#define BI_PHYMODE_TBI 5 +#if defined (CONFIG_440EPX) +#define BI_PHYMODE_SMII 6 +#define BI_PHYMODE_MII 7 +#endif +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1)) +#endif /*-----------------------------------------------------------------------------+ * Global variables. TX and RX descriptors and buffers. @@ -181,7 +191,7 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) { EMAC_4XX_HW_PST hw_p = dev->priv; uint32_t failsafe = 10000; -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) unsigned long mfr; #endif @@ -205,19 +215,19 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) } /* EMAC RESET */ -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* provide clocks for EMAC internal loopback */ mfsdr (sdr_mfr, mfr); - mfr |= 0x08000000; + mfr |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum); mtsdr(sdr_mfr, mfr); #endif out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* remove clocks for EMAC internal loopback */ mfsdr (sdr_mfr, mfr); - mfr &= ~0x08000000; + mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum); mtsdr(sdr_mfr, mfr); #endif @@ -317,10 +327,50 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) out32 (RGMII_FER, rmiifer); return ((int)pfc1); - } #endif /* CONFIG_440_GX */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) +{ + unsigned long zmiifer=0x0; + + /* + * Right now only 2*RGMII is supported. Please extend when needed. + * sr - 2006-08-29 + */ + switch (1) { + case 0: + /* 1 x GMII port */ + out32 (ZMII_FER, 0x00); + out32 (RGMII_FER, 0x00000037); + bis->bi_phymode[0] = BI_PHYMODE_GMII; + bis->bi_phymode[1] = BI_PHYMODE_NONE; + break; + case 1: + /* 2 x RGMII ports */ + out32 (ZMII_FER, 0x00); + out32 (RGMII_FER, 0x00000055); + bis->bi_phymode[0] = BI_PHYMODE_RGMII; + bis->bi_phymode[1] = BI_PHYMODE_RGMII; + break; + case 2: + /* 2 x SMII ports */ + + break; + default: + break; + } + + /* Ensure we setup mdio for this devnum and ONLY this devnum */ + zmiifer = in32 (ZMII_FER); + zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); + out32 (ZMII_FER, zmiifer); + + return ((int)0x0); +} +#endif /* CONFIG_440EPX */ + static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) { int i, j; @@ -332,13 +382,16 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) unsigned mode_reg; unsigned short devnum; unsigned short reg_short; -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) sys_info_t sysinfo; -#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) int ethgroup = -1; #endif #endif -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE) unsigned long mfr; #endif @@ -352,7 +405,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) return -1; } -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* Need to get the OPB frequency so we can access the PHY */ get_sys_info (&sysinfo); #endif @@ -407,7 +462,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #if defined(CONFIG_440EP) || defined(CONFIG_440GR) out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); -#elif defined(CONFIG_440GX) +#elif defined(CONFIG_440GX) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); #elif defined(CONFIG_440GP) /* set RMII mode */ @@ -429,10 +484,10 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) __asm__ volatile ("eieio"); /* reset emac so we have access to the phy */ -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* provide clocks for EMAC internal loopback */ mfsdr (sdr_mfr, mfr); - mfr |= 0x08000000; + mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum); mtsdr(sdr_mfr, mfr); #endif @@ -444,15 +499,19 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) udelay (1000); failsafe--; } + if (failsafe <= 0) + printf("\nProblem resetting EMAC!\n"); -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* remove clocks for EMAC internal loopback */ mfsdr (sdr_mfr, mfr); - mfr &= ~0x08000000; + mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum); mtsdr(sdr_mfr, mfr); #endif -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* Whack the M1 register */ mode_reg = 0x0; mode_reg &= ~0x00000038; @@ -502,15 +561,39 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) * otherwise, just check the speeds & feeds */ if (hw_p->first_init == 0) { +#if defined(CONFIG_88E1111_CLK_DELAY) + /* + * On some boards (e.g. ALPR) the Marvell 88E1111 PHY needs + * the "RGMII transmit timing control" and "RGMII receive + * timing control" bits set, so that Gbit communication works + * without problems. + * Also set the "Transmitter disable" to 1 to enable the + * transmitter. + * After setting these bits a soft-reset must occur for this + * change to become active. + */ + miiphy_read (dev->name, reg, 0x14, ®_short); + reg_short |= (1 << 7) | (1 << 1) | (1 << 0); + miiphy_write (dev->name, reg, 0x14, reg_short); +#endif +#if defined(CONFIG_M88E1111_PHY) /* test-only: merge with CONFIG_88E1111_CLK_DELAY !!! */ + miiphy_write (dev->name, reg, 0x14, 0x0ce3); + miiphy_write (dev->name, reg, 0x18, 0x4101); + miiphy_write (dev->name, reg, 0x09, 0x0e00); + miiphy_write (dev->name, reg, 0x04, 0x01e1); +#endif miiphy_reset (dev->name, reg); -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) + #if defined(CONFIG_CIS8201_PHY) /* * Cicada 8201 PHY needs to have an extended register whacked * for RGMII mode. */ - if ( ((devnum == 2) || (devnum ==3)) && (4 == ethgroup) ) { + if (((devnum == 2) || (devnum == 3)) && (4 == ethgroup)) { #if defined(CONFIG_CIS8201_SHORT_ETCH) miiphy_write (dev->name, reg, 23, 0x1300); #else @@ -580,7 +663,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) (int) speed, (duplex == HALF) ? "HALF" : "FULL"); } -#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) +#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \ + !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) #if defined(CONFIG_440EP) || defined(CONFIG_440GR) mfsdr(sdr_mfr, reg); if (speed == 100) { @@ -603,15 +687,34 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum)); else if (speed == 100) reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum)); - else + else if (speed == 10) reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum)); - + else { + printf("Error in RGMII Speed\n"); + return -1; + } out32 (RGMII_SSR, reg); } #endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + if (speed == 1000) + reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum)); + else if (speed == 100) + reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum)); + else if (speed == 10) + reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum)); + else { + printf("Error in RGMII Speed\n"); + return -1; + } + out32 (RGMII_SSR, reg); +#endif + /* set the Mal configuration reg */ -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000); #else @@ -795,8 +898,10 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) /* set speed */ if (speed == _1000BASET) { -#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) unsigned long pfc1; + mfsdr (sdr_pfc1, pfc1); pfc1 |= SDR0_PFC1_EM_1000; mtsdr (sdr_pfc1, pfc1); @@ -942,6 +1047,14 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr, #define UIC0SR uic0sr #endif +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define UICMSR_ETHX uic0msr +#define UICSR_ETHX uic0sr +#else +#define UICMSR_ETHX uic1msr +#define UICSR_ETHX uic1sr +#endif + int enetInt (struct eth_device *dev) { int serviced; @@ -950,6 +1063,7 @@ int enetInt (struct eth_device *dev) unsigned long emac_isr = 0; unsigned long mal_rx_eob; unsigned long my_uic0msr, my_uic1msr; + unsigned long my_uicmsr_ethx; #if defined(CONFIG_440GX) unsigned long my_uic2msr; @@ -977,8 +1091,11 @@ int enetInt (struct eth_device *dev) #if defined(CONFIG_440GX) my_uic2msr = mfdcr (uic2msr); #endif + my_uicmsr_ethx = mfdcr (UICMSR_ETHX); + if (!(my_uic0msr & (UIC_MRE | UIC_MTE)) - && !(my_uic1msr & (UIC_ETH0 | UIC_ETH1 | UIC_MS | UIC_MTDE | UIC_MRDE))) { + && !(my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) + && !(my_uicmsr_ethx & (UIC_ETH0 | UIC_ETH1))) { /* not for us */ return (rc); } @@ -997,8 +1114,7 @@ int enetInt (struct eth_device *dev) mal_isr = mfdcr (malesr); /* look for mal error */ if (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) { - mal_err (dev, mal_isr, my_uic0msr, - MAL_UIC_DEF, MAL_UIC_ERR); + mal_err (dev, mal_isr, my_uic1msr, MAL_UIC_DEF, MAL_UIC_ERR); serviced = 1; rc = 0; } @@ -1006,7 +1122,7 @@ int enetInt (struct eth_device *dev) /* port by port dispatch of emac interrupts */ if (hw_p->devnum == 0) { - if (UIC_ETH0 & my_uic1msr) { /* look for EMAC errors */ + if (UIC_ETH0 & my_uicmsr_ethx) { /* look for EMAC errors */ emac_isr = in32 (EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); @@ -1017,14 +1133,15 @@ int enetInt (struct eth_device *dev) if ((hw_p->emac_ier & emac_isr) || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ - mtdcr (uic1sr, UIC_ETH0 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ + mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ + mtdcr (UICSR_ETHX, UIC_ETH0); /* Clear */ return (rc); /* we had errors so get out */ } } #if !defined(CONFIG_440SP) if (hw_p->devnum == 1) { - if (UIC_ETH1 & my_uic1msr) { /* look for EMAC errors */ + if (UIC_ETH1 & my_uicmsr_ethx) { /* look for EMAC errors */ emac_isr = in32 (EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); @@ -1035,7 +1152,8 @@ int enetInt (struct eth_device *dev) if ((hw_p->emac_ier & emac_isr) || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ - mtdcr (uic1sr, UIC_ETH1 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ + mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ + mtdcr (UICSR_ETHX, UIC_ETH1); /* Clear */ return (rc); /* we had errors so get out */ } } @@ -1102,10 +1220,10 @@ int enetInt (struct eth_device *dev) mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ switch (hw_p->devnum) { case 0: - mtdcr (uic1sr, UIC_ETH0); + mtdcr (UICSR_ETHX, UIC_ETH0); break; case 1: - mtdcr (uic1sr, UIC_ETH1); + mtdcr (UICSR_ETHX, UIC_ETH1); break; #if defined (CONFIG_440GX) case 2: @@ -1512,7 +1630,7 @@ int ppc_4xx_eth_initialize (bd_t * bis) if (0 == virgin) { /* set the MAL IER ??? names may change with new spec ??? */ -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) mal_ier = MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE | MAL_IER_DE | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE ; diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile index 93416b57bf..16dc8d62c0 100644 --- a/cpu/ppc4xx/Makefile +++ b/cpu/ppc4xx/Makefile @@ -30,7 +30,7 @@ SOBJS = dcr.o COBJS = 405gp_pci.o 4xx_enet.o \ bedbug_405.o commproc.o \ cpu.o cpu_init.o i2c.o interrupts.o \ - miiphy.o sdram.o serial.o \ + miiphy.o ndfc.o sdram.o serial.o \ spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o \ 440spe_pcie.o diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index bc51fbfdbe..94478dbb10 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -41,14 +41,15 @@ DECLARE_GLOBAL_DATA_PTR; #endif - #if defined(CONFIG_440) #define FREQ_EBC (sys_info.freqEPB) #else #define FREQ_EBC (sys_info.freqPLB / sys_info.pllExtBusDiv) #endif -#if defined(CONFIG_405GP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_405GP) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define PCI_ASYNC @@ -58,7 +59,8 @@ int pci_async_enabled(void) return (mfdcr(strap) & PSR_PCI_ASYNC_EN); #endif -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) unsigned long val; mfsdr(sdr_sdstp1, val); @@ -82,9 +84,10 @@ int pci_arbiter_enabled(void) return (mfdcr(cpc0_strp1) & CPC0_STRP1_PAE_MASK); #endif -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \ - defined(CONFIG_440GR) || defined(CONFIG_440SP) || \ - defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) unsigned long val; mfsdr(sdr_sdstp1, val); @@ -93,8 +96,10 @@ int pci_arbiter_enabled(void) } #endif -#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ - defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_405EP) || defined(CONFIG_440GX) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define I2C_BOOTROM @@ -102,17 +107,75 @@ int i2c_bootrom_enabled(void) { #if defined(CONFIG_405EP) return (mfdcr(cpc0_boot) & CPC0_BOOT_SEP); -#endif - -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \ - defined(CONFIG_440GR) || defined(CONFIG_440SP) || \ - defined(CONFIG_440SPE) +#else unsigned long val; mfsdr(sdr_sdcs, val); return (val & SDR0_SDCS_SDD); #endif } + +#if defined(CONFIG_440GX) +#define SDR0_PINSTP_SHIFT 29 +static char *bootstrap_str[] = { + "EBC (16 bits)", + "EBC (8 bits)", + "EBC (32 bits)", + "EBC (8 bits)", + "PCI", + "I2C (Addr 0x54)", + "Reserved", + "I2C (Addr 0x50)", +}; +#endif + +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#define SDR0_PINSTP_SHIFT 30 +static char *bootstrap_str[] = { + "EBC (8 bits)", + "PCI", + "I2C (Addr 0x54)", + "I2C (Addr 0x50)", +}; +#endif + +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#define SDR0_PINSTP_SHIFT 29 +static char *bootstrap_str[] = { + "EBC (8 bits)", + "PCI", + "NAND (8 bits)", + "EBC (16 bits)", + "EBC (16 bits)", + "I2C (Addr 0x54)", + "PCI", + "I2C (Addr 0x52)", +}; +#endif + +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define SDR0_PINSTP_SHIFT 29 +static char *bootstrap_str[] = { + "EBC (8 bits)", + "EBC (16 bits)", + "EBC (16 bits)", + "NAND (8 bits)", + "PCI", + "I2C (Addr 0x54)", + "PCI", + "I2C (Addr 0x52)", +}; +#endif + +#if defined(SDR0_PINSTP_SHIFT) +static int bootstrap_option(void) +{ + unsigned long val; + + mfsdr(sdr_pinstp, val); + return ((val & 0xe0000000) >> SDR0_PINSTP_SHIFT); +} +#endif /* SDR0_PINSTP_SHIFT */ #endif @@ -244,6 +307,22 @@ int checkcpu (void) #endif /* CONFIG_440GR */ #endif /* CONFIG_440 */ + case PVR_440EPX1_RA: + puts("EPx Rev. A - Security/Kasumi support"); + break; + + case PVR_440EPX2_RA: + puts("EPx Rev. A - No Security/Kasumi support"); + break; + + case PVR_440GRX1_RA: + puts("GRx Rev. A - Security/Kasumi support"); + break; + + case PVR_440GRX2_RA: + puts("GRx Rev. A - No Security/Kasumi support"); + break; + case PVR_440SP_RA: puts("SP Rev. A"); break; @@ -272,6 +351,10 @@ int checkcpu (void) #if defined(I2C_BOOTROM) printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis"); +#if defined(SDR0_PINSTP_SHIFT) + printf (" Bootstrap Option %c - ", (char)bootstrap_option() + 'A'); + printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]); +#endif #endif #if defined(CONFIG_PCI) diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c index 886f405156..c5a9f02566 100644 --- a/cpu/ppc4xx/interrupts.c +++ b/cpu/ppc4xx/interrupts.c @@ -57,12 +57,13 @@ static struct irq_action irq_vecs1[32]; /* For UIC1 */ void uic1_interrupt( void * parms); /* UIC1 handler */ -#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) static struct irq_action irq_vecs2[32]; /* For UIC2 */ void uic2_interrupt( void * parms); /* UIC2 handler */ #endif /* CONFIG_440GX CONFIG_440SPE */ -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) static struct irq_action irq_vecs3[32]; /* For UIC3 */ void uic3_interrupt( void * parms); /* UIC3 handler */ #endif /* CONFIG_440SPE */ @@ -119,12 +120,13 @@ int interrupt_init_cpu (unsigned *decrementer_count) irq_vecs1[vec].handler = NULL; irq_vecs1[vec].arg = NULL; irq_vecs1[vec].count = 0; -#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) irq_vecs2[vec].handler = NULL; irq_vecs2[vec].arg = NULL; irq_vecs2[vec].count = 0; #endif /* CONFIG_440GX */ -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) irq_vecs3[vec].handler = NULL; irq_vecs3[vec].arg = NULL; irq_vecs3[vec].count = 0; @@ -230,6 +232,32 @@ void external_interrupt(struct pt_regs *regs) } /* external_interrupt CONFIG_440GX */ +#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +void external_interrupt(struct pt_regs *regs) +{ + ulong uic_msr; + + /* + * Read masked interrupt status register to determine interrupt source + */ + /* 440 SPe uses base uic register */ + uic_msr = mfdcr(uic0msr); + + if ( (UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr) ) + uic1_interrupt(0); + + if ( (UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr) ) + uic2_interrupt(0); + + if (uic_msr & ~(UICB0_ALL)) + uic0_interrupt(0); + + mtdcr(uic0sr, uic_msr); + + return; + +} /* external_interrupt CONFIG_440EPX & CONFIG_440GRX */ + #elif defined(CONFIG_440SPE) void external_interrupt(struct pt_regs *regs) { @@ -303,7 +331,8 @@ void external_interrupt(struct pt_regs *regs) } #endif -#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* Handler for UIC0 interrupt */ void uic0_interrupt( void * parms) { @@ -394,7 +423,8 @@ void uic1_interrupt( void * parms) } #endif /* defined(CONFIG_440) */ -#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* Handler for UIC2 interrupt */ void uic2_interrupt( void * parms) { @@ -496,7 +526,8 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg) int i = vec; #if defined(CONFIG_440) -#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) if ((vec > 31) && (vec < 64)) { i = vec - 32; irqa = irq_vecs1; @@ -523,7 +554,8 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg) irqa[i].arg = arg; #if defined(CONFIG_440) -#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) if ((vec > 31) && (vec < 64)) mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i)); else if (vec > 63) @@ -546,7 +578,8 @@ void irq_free_handler (int vec) int i = vec; #if defined(CONFIG_440) -#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) if ((vec > 31) && (vec < 64)) { irqa = irq_vecs1; i = vec - 32; @@ -567,7 +600,8 @@ void irq_free_handler (int vec) #endif #if defined(CONFIG_440) -#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) if ((vec > 31) && (vec < 64)) mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i)); else if (vec > 63) @@ -635,7 +669,8 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) printf("\n"); #endif -#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) printf ("\nUIC 2\n"); printf ("Nr Routine Arg Count\n"); diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c index aa580ed48f..6b98025308 100644 --- a/cpu/ppc4xx/miiphy.c +++ b/cpu/ppc4xx/miiphy.c @@ -173,7 +173,8 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr, } sta_reg = reg; /* reg address */ /* set clock (50Mhz) and read flags */ -#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */ sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_READ; #else @@ -183,7 +184,9 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr, sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ; #endif -#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE) +#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \ + !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \ + !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; #endif sta_reg = sta_reg | (addr << 5); /* Phy address */ @@ -244,7 +247,8 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr, sta_reg = 0; sta_reg = reg; /* reg address */ /* set clock (50Mhz) and read flags */ -#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */ sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_WRITE; #else @@ -254,7 +258,9 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr, sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ; #endif -#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE) +#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \ + !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \ + !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */ #endif sta_reg = sta_reg | ((unsigned long) addr << 5);/* Phy address */ diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c new file mode 100644 index 0000000000..e4ab326bbf --- /dev/null +++ b/cpu/ppc4xx/ndfc.c @@ -0,0 +1,173 @@ +/* + * Overview: + * Platform independend driver for NDFC (NanD Flash Controller) + * integrated into EP440 cores + * + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Based on original work by + * Thomas Gleixner + * Copyright 2006 IBM + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY) + +#include +#include +#include +#include + +static u8 hwctl = 0; + +static void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd) +{ + switch (cmd) { + case NAND_CTL_SETCLE: + hwctl |= 0x1; + break; + + case NAND_CTL_CLRCLE: + hwctl &= ~0x1; + break; + + case NAND_CTL_SETALE: + hwctl |= 0x2; + break; + + case NAND_CTL_CLRALE: + hwctl &= ~0x2; + break; + } +} + +static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte) +{ + struct nand_chip *this = mtdinfo->priv; + ulong base = (ulong) this->IO_ADDR_W; + + if (hwctl & 0x1) + out8(base + NDFC_CMD, byte); + else if (hwctl & 0x2) + out8(base + NDFC_ALE, byte); + else + out8(base + NDFC_DATA, byte); +} + +static u_char ndfc_read_byte(struct mtd_info *mtdinfo) +{ + struct nand_chip *this = mtdinfo->priv; + ulong base = (ulong) this->IO_ADDR_W; + + return (in8(base + NDFC_DATA)); +} + +static int ndfc_dev_ready(struct mtd_info *mtdinfo) +{ + struct nand_chip *this = mtdinfo->priv; + ulong base = (ulong) this->IO_ADDR_W; + + while (!(in32(base + NDFC_STAT) & NDFC_STAT_IS_READY)) + ; + + return 1; +} + +#ifndef CONFIG_NAND_SPL +/* + * Don't use these speedup functions in NAND boot image, since the image + * has to fit into 4kByte. + */ + +/* + * Speedups for buffer read/write/verify + * + * NDFC allows 32bit read/write of data. So we can speed up the buffer + * functions. No further checking, as nand_base will always read/write + * page aligned. + */ +static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len) +{ + struct nand_chip *this = mtdinfo->priv; + ulong base = (ulong) this->IO_ADDR_W; + uint32_t *p = (uint32_t *) buf; + + for(;len > 0; len -= 4) + *p++ = in32(base + NDFC_DATA); +} + +static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len) +{ + struct nand_chip *this = mtdinfo->priv; + ulong base = (ulong) this->IO_ADDR_W; + uint32_t *p = (uint32_t *) buf; + + for(; len > 0; len -= 4) + out32(base + NDFC_DATA, *p++); +} + +static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len) +{ + struct nand_chip *this = mtdinfo->priv; + ulong base = (ulong) this->IO_ADDR_W; + uint32_t *p = (uint32_t *) buf; + + for(; len > 0; len -= 4) + if (*p++ != in32(base + NDFC_DATA)) + return -1; + + return 0; +} +#endif /* #ifndef CONFIG_NAND_SPL */ + +void board_nand_init(struct nand_chip *nand) +{ + nand->eccmode = NAND_ECC_SOFT; + + nand->hwcontrol = ndfc_hwcontrol; + nand->read_byte = ndfc_read_byte; + nand->write_byte = ndfc_write_byte; + nand->dev_ready = ndfc_dev_ready; + +#ifndef CONFIG_NAND_SPL + nand->write_buf = ndfc_write_buf; + nand->read_buf = ndfc_read_buf; + nand->verify_buf = ndfc_verify_buf; +#else + /* + * Setup EBC (CS0 only right now) + */ + mtdcr(ebccfga, xbcfg); + mtdcr(ebccfgd, 0xb8400000); + + mtebc(pb0cr, CFG_EBC_PB0CR); + mtebc(pb0ap, CFG_EBC_PB0AP); +#endif + + /* Set NandFlash Core Configuration Register */ + /* Chip select 3, 1col x 2 rows */ + out32(CFG_NAND_BASE + NDFC_CCR, 0x00000000 | (CFG_NAND_CS << 24)); + out32(CFG_NAND_BASE + NDFC_BCFG0 + (CFG_NAND_CS << 2), 0x80002222); +} + +#endif diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c index ad3ca6e819..fab0d95006 100644 --- a/cpu/ppc4xx/serial.c +++ b/cpu/ppc4xx/serial.c @@ -264,10 +264,12 @@ int serial_tstc () #endif /* CONFIG_IOP480 */ /*****************************************************************************/ -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405EP) +#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP) || \ + defined(CONFIG_440) #if defined(CONFIG_440) -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300 #define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400 #else @@ -279,15 +281,34 @@ int serial_tstc () #define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000600 #endif -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) -#define CR0_MASK 0xdfffffff -#define CR0_EXTCLK_ENA 0x00800000 -#define CR0_UDIV_POS 0 -#else +#if defined(CONFIG_440GP) #define CR0_MASK 0x3fff0000 #define CR0_EXTCLK_ENA 0x00600000 #define CR0_UDIV_POS 16 -#endif /* CONFIG_440GX */ +#define UDIV_SUBTRACT 1 +#define UART0_SDR cntrl0 +#define MFREG(a, d) d = mfdcr(a) +#define MTREG(a, d) mtdcr(a, d) +#else /* #if defined(CONFIG_440GP) */ +/* all other 440 PPC's access clock divider via sdr register */ +#define CR0_MASK 0xdfffffff +#define CR0_EXTCLK_ENA 0x00800000 +#define CR0_UDIV_POS 0 +#define UDIV_SUBTRACT 0 +#define UART0_SDR sdr_uart0 +#define UART1_SDR sdr_uart1 +#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \ + defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPe) +#define UART2_SDR sdr_uart2 +#endif +#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \ + defined(CONFIG_440GR) || defined(CONFIG_440GRx) +#define UART3_SDR sdr_uart3 +#endif +#define MFREG(a, d) mfsdr(a, d) +#define MTREG(a, d) mtsdr(a, d) +#endif /* #if defined(CONFIG_440GP) */ #elif defined(CONFIG_405EP) #define UART0_BASE 0xef600300 #define UART1_BASE 0xef600400 @@ -309,21 +330,15 @@ int serial_tstc () #if defined(CONFIG_UART1_CONSOLE) #define ACTING_UART0_BASE UART1_BASE #define ACTING_UART1_BASE UART0_BASE -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \ - defined(CONFIG_440GR) || defined(CONFIG_440SP) || \ - defined(CONFIG_440SPE) -#define UART0_SDR sdr_uart1 -#define UART1_SDR sdr_uart0 -#endif /* CONFIG_440GX */ #else #define ACTING_UART0_BASE UART0_BASE #define ACTING_UART1_BASE UART1_BASE -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \ - defined(CONFIG_440GR) || defined(CONFIG_440SP) || \ - defined(CONFIG_440SPE) -#define UART0_SDR sdr_uart0 -#define UART1_SDR sdr_uart1 -#endif /* CONFIG_440GX */ +#endif + +#if defined(CONFIG_SERIAL_MULTI) +#define UART_BASE dev_base +#else +#define UART_BASE ACTING_UART0_BASE #endif #if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK) @@ -419,7 +434,7 @@ static void serial_divs (int baudrate, unsigned long *pudiv, *pbdiv = div/udiv; } -#endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK */ +#endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK) */ /* * Minimal serial functions needed to use one of the SMC ports @@ -441,23 +456,9 @@ int serial_init(void) unsigned long tmp; #endif -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || \ - defined(CONFIG_440SPE) -#if defined(CONFIG_SERIAL_MULTI) - if (UART0_BASE == dev_base) { - mfsdr(UART0_SDR,reg); - reg &= ~CR0_MASK; - } else { - mfsdr(UART1_SDR,reg); - reg &= ~CR0_MASK; - } -#else - mfsdr(UART0_SDR,reg); + MFREG(UART0_SDR, reg); reg &= ~CR0_MASK; -#endif -#else - reg = mfdcr(cntrl0) & ~CR0_MASK; -#endif /* CONFIG_440GX */ + #ifdef CFG_EXT_SERIAL_CLOCK reg |= CR0_EXTCLK_ENA; udiv = 1; @@ -471,47 +472,34 @@ int serial_init(void) serial_divs (gd->baudrate, &udiv, &bdiv); #endif -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \ - defined(CONFIG_440GR) || defined(CONFIG_440SP) || \ - defined(CONFIG_440SPE) - reg |= udiv << CR0_UDIV_POS; /* set the UART divisor */ -#if defined(CONFIG_SERIAL_MULTI) - if (UART0_BASE == dev_base) { - mtsdr (UART0_SDR,reg); - } else { - mtsdr (UART1_SDR,reg); - } -#else - mtsdr (UART0_SDR,reg); + reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */ + + /* + * Configure input clock to baudrate generator for all + * available serial ports here + */ + MTREG(UART0_SDR, reg); +#if defined(UART1_SDR) + MTREG(UART1_SDR, reg); #endif -#else - reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */ - mtdcr (cntrl0, reg); +#if defined(UART2_SDR) + MTREG(UART2_SDR, reg); #endif - -#if defined(CONFIG_SERIAL_MULTI) - out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */ - out8 (dev_base + UART_DLL, bdiv); /* set baudrate divisor */ - out8 (dev_base + UART_DLM, bdiv >> 8);/* set baudrate divisor */ - out8 (dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */ - out8 (dev_base + UART_FCR, 0x00); /* disable FIFO */ - out8 (dev_base + UART_MCR, 0x00); /* no modem control DTR RTS */ - val = in8 (dev_base + UART_LSR); /* clear line status */ - val = in8 (dev_base + UART_RBR); /* read receive buffer */ - out8 (dev_base + UART_SCR, 0x00); /* set scratchpad */ - out8 (dev_base + UART_IER, 0x00); /* set interrupt enable reg */ -#else - out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */ - out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */ - out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */ - out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */ - out8 (ACTING_UART0_BASE + UART_FCR, 0x00); /* disable FIFO */ - out8 (ACTING_UART0_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */ - val = in8 (ACTING_UART0_BASE + UART_LSR); /* clear line status */ - val = in8 (ACTING_UART0_BASE + UART_RBR); /* read receive buffer */ - out8 (ACTING_UART0_BASE + UART_SCR, 0x00); /* set scratchpad */ - out8 (ACTING_UART0_BASE + UART_IER, 0x00); /* set interrupt enable reg */ +#if defined(UART3_SDR) + MTREG(UART3_SDR, reg); #endif + + out8(UART_BASE + UART_LCR, 0x80); /* set DLAB bit */ + out8(UART_BASE + UART_DLL, bdiv); /* set baudrate divisor */ + out8(UART_BASE + UART_DLM, bdiv >> 8); /* set baudrate divisor */ + out8(UART_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */ + out8(UART_BASE + UART_FCR, 0x00); /* disable FIFO */ + out8(UART_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */ + val = in8(UART_BASE + UART_LSR); /* clear line status */ + val = in8(UART_BASE + UART_RBR); /* read receive buffer */ + out8(UART_BASE + UART_SCR, 0x00); /* set scratchpad */ + out8(UART_BASE + UART_IER, 0x00); /* set interrupt enable reg */ + return (0); } @@ -564,29 +552,17 @@ int serial_init (void) tmp = gd->baudrate * udiv * 16; bdiv = (clk + tmp / 2) / tmp; -#if defined(CONFIG_SERIAL_MULTI) - out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */ - out8 (dev_base + UART_DLL, bdiv); /* set baudrate divisor */ - out8 (dev_base + UART_DLM, bdiv >> 8);/* set baudrate divisor */ - out8 (dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */ - out8 (dev_base + UART_FCR, 0x00); /* disable FIFO */ - out8 (dev_base + UART_MCR, 0x00); /* no modem control DTR RTS */ - val = in8 (dev_base + UART_LSR); /* clear line status */ - val = in8 (dev_base + UART_RBR); /* read receive buffer */ - out8 (dev_base + UART_SCR, 0x00); /* set scratchpad */ - out8 (dev_base + UART_IER, 0x00); /* set interrupt enable reg */ -#else - out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */ - out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */ - out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */ - out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */ - out8 (ACTING_UART0_BASE + UART_FCR, 0x00); /* disable FIFO */ - out8 (ACTING_UART0_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */ - val = in8 (ACTING_UART0_BASE + UART_LSR); /* clear line status */ - val = in8 (ACTING_UART0_BASE + UART_RBR); /* read receive buffer */ - out8 (ACTING_UART0_BASE + UART_SCR, 0x00); /* set scratchpad */ - out8 (ACTING_UART0_BASE + UART_IER, 0x00); /* set interrupt enable reg */ -#endif + out8(UART_BASE + UART_LCR, 0x80); /* set DLAB bit */ + out8(UART_BASE + UART_DLL, bdiv); /* set baudrate divisor */ + out8(UART_BASE + UART_DLM, bdiv >> 8); /* set baudrate divisor */ + out8(UART_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */ + out8(UART_BASE + UART_FCR, 0x00); /* disable FIFO */ + out8(UART_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */ + val = in8(UART_BASE + UART_LSR); /* clear line status */ + val = in8(UART_BASE + UART_RBR); /* read receive buffer */ + out8(UART_BASE + UART_SCR, 0x00); /* set scratchpad */ + out8(UART_BASE + UART_IER, 0x00); /* set interrupt enable reg */ + return (0); } @@ -598,55 +574,10 @@ void serial_setbrg_dev (unsigned long dev_base) void serial_setbrg (void) #endif { - unsigned long tmp; - unsigned long clk; - unsigned long udiv; - unsigned short bdiv; - -#ifdef CFG_EXT_SERIAL_CLOCK - clk = CFG_EXT_SERIAL_CLOCK; -#else - clk = gd->cpu_clk; -#endif - -#ifdef CONFIG_405EP - udiv = ((mfdcr (cpc0_ucr) & UCR0_MASK) >> UCR0_UDIV_POS); -#else - udiv = ((mfdcr (cntrl0) & 0x3e) >> 1) + 1; -#endif /* CONFIG_405EP */ - -#if !defined(CFG_EXT_SERIAL_CLOCK) && \ - ( defined(CONFIG_440GX) || defined(CONFIG_440EP) || \ - defined(CONFIG_440GR) || defined(CONFIG_440SP) || \ - defined(CONFIG_440SPE) ) - serial_divs (gd->baudrate, &udiv, &bdiv); - tmp = udiv << CR0_UDIV_POS; /* set the UART divisor */ -#if defined(CONFIG_SERIAL_MULTI) - if (UART0_BASE == dev_base) { - mtsdr (UART0_SDR, tmp); - } else { - mtsdr (UART1_SDR, tmp); - } -#else - mtsdr (UART0_SDR, tmp); -#endif - -#else - - tmp = gd->baudrate * udiv * 16; - bdiv = (clk + tmp / 2) / tmp; -#endif /* !defined(CFG_EXT_SERIAL_CLOCK) && (...) */ - #if defined(CONFIG_SERIAL_MULTI) - out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */ - out8 (dev_base + UART_DLL, bdiv); /* set baudrate divisor */ - out8 (dev_base + UART_DLM, bdiv >> 8);/* set baudrate divisor */ - out8 (dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */ + serial_init_dev(dev_base); #else - out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */ - out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */ - out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */ - out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */ + serial_init(); #endif } @@ -667,19 +598,11 @@ void serial_putc (const char c) /* check THRE bit, wait for transmiter available */ for (i = 1; i < 3500; i++) { -#if defined(CONFIG_SERIAL_MULTI) - if ((in8 (dev_base + UART_LSR) & 0x20) == 0x20) -#else - if ((in8 (ACTING_UART0_BASE + UART_LSR) & 0x20) == 0x20) -#endif + if ((in8 (UART_BASE + UART_LSR) & 0x20) == 0x20) break; udelay (100); } -#if defined(CONFIG_SERIAL_MULTI) - out8 (dev_base + UART_THR, c); /* put character out */ -#else - out8 (ACTING_UART0_BASE + UART_THR, c); /* put character out */ -#endif + out8 (UART_BASE + UART_THR, c); /* put character out */ } #if defined(CONFIG_SERIAL_MULTI) @@ -709,11 +632,7 @@ int serial_getc (void) #if defined(CONFIG_HW_WATCHDOG) WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ #endif /* CONFIG_HW_WATCHDOG */ -#if defined(CONFIG_SERIAL_MULTI) - status = in8 (dev_base + UART_LSR); -#else - status = in8 (ACTING_UART0_BASE + UART_LSR); -#endif + status = in8 (UART_BASE + UART_LSR); if ((status & asyncLSRDataReady1) != 0x0) { break; } @@ -721,22 +640,14 @@ int serial_getc (void) asyncLSROverrunError1 | asyncLSRParityError1 | asyncLSRBreakInterrupt1 )) != 0) { -#if defined(CONFIG_SERIAL_MULTI) - out8 (dev_base + UART_LSR, -#else - out8 (ACTING_UART0_BASE + UART_LSR, -#endif + out8 (UART_BASE + UART_LSR, asyncLSRFramingError1 | asyncLSROverrunError1 | asyncLSRParityError1 | asyncLSRBreakInterrupt1); } } -#if defined(CONFIG_SERIAL_MULTI) - return (0x000000ff & (int) in8 (dev_base)); -#else - return (0x000000ff & (int) in8 (ACTING_UART0_BASE)); -#endif + return (0x000000ff & (int) in8 (UART_BASE)); } #if defined(CONFIG_SERIAL_MULTI) @@ -747,11 +658,7 @@ int serial_tstc (void) { unsigned char status; -#if defined(CONFIG_SERIAL_MULTI) - status = in8 (dev_base + UART_LSR); -#else - status = in8 (ACTING_UART0_BASE + UART_LSR); -#endif + status = in8 (UART_BASE + UART_LSR); if ((status & asyncLSRDataReady1) != 0x0) { return (1); } @@ -759,11 +666,7 @@ int serial_tstc (void) asyncLSROverrunError1 | asyncLSRParityError1 | asyncLSRBreakInterrupt1 )) != 0) { -#if defined(CONFIG_SERIAL_MULTI) - out8 (dev_base + UART_LSR, -#else - out8 (ACTING_UART0_BASE + UART_LSR, -#endif + out8 (UART_BASE + UART_LSR, asyncLSRFramingError1 | asyncLSROverrunError1 | asyncLSRParityError1 | diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c index e552c03473..2d16a83420 100644 --- a/cpu/ppc4xx/speed.c +++ b/cpu/ppc4xx/speed.c @@ -199,7 +199,8 @@ ulong get_PCI_freq (void) #elif defined(CONFIG_440) -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) void get_sys_info (sys_info_t *sysInfo) { unsigned long temp; diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 60ed2d5453..5a1ab386b1 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -117,12 +117,16 @@ .extern ext_bus_cntlr_init .extern sdram_init +#ifdef CONFIG_NAND_U_BOOT + .extern reconfig_tlb0 +#endif /* * Set up GOT: Global Offset Table * * Use r14 to access the GOT */ +#if !defined(CONFIG_NAND_SPL) START_GOT GOT_ENTRY(_GOT2_TABLE_) GOT_ENTRY(_FIXUP_TABLE_) @@ -136,6 +140,18 @@ GOT_ENTRY(_end) GOT_ENTRY(__bss_start) END_GOT +#endif /* CONFIG_NAND_SPL */ + +#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) + /* + * NAND U-Boot image is started from offset 0 + */ + .text + bl reconfig_tlb0 + GET_GOT + bl cpu_init_f /* run low-level CPU init code (from Flash) */ + bl board_init_f +#endif /* * 440 Startup -- on reset only the top 4k of the effective @@ -150,11 +166,21 @@ */ #if defined(CONFIG_440) +#if !defined(CONFIG_NAND_SPL) .section .bootpg,"ax" +#endif .globl _start_440 /**************************************************************************/ _start_440: + /*--------------------------------------------------------------------+ + | 440EPX BUP Change - Hardware team request + +--------------------------------------------------------------------*/ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + sync + nop + nop +#endif /*----------------------------------------------------------------+ | Core bug fix. Clear the esr +-----------------------------------------------------------------*/ @@ -171,15 +197,19 @@ _start_440: mtspr srr1,r0 mtspr csrr0,r0 mtspr csrr1,r0 -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* NOTE: 440GX adds machine check status regs */ + /* NOTE: 440GX adds machine check status regs */ +#if defined(CONFIG_440) && !defined(CONFIG_440GP) mtspr mcsrr0,r0 mtspr mcsrr1,r0 - mfspr r1, mcsr + mfspr r1,mcsr mtspr mcsr,r1 #endif /*----------------------------------------------------------------*/ /* Initialize debug */ /*----------------------------------------------------------------*/ + mfspr r1,dbcr0 + andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */ + bne skip_debug_init /* if set, don't clear debug register */ mtspr dbcr0,r0 mtspr dbcr1,r0 mtspr dbcr2,r0 @@ -193,6 +223,7 @@ _start_440: mfspr r1,dbsr mtspr dbsr,r1 /* Clear all valid bits */ +skip_debug_init: /*----------------------------------------------------------------*/ /* CCR0 init */ @@ -352,7 +383,53 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ /*----------------------------------------------------------------*/ /* Continue from 'normal' start */ /*----------------------------------------------------------------*/ -2: bl 3f +2: + +#if defined(CONFIG_NAND_SPL) + /* + * Enable internal SRAM + */ + lis r2,0x7fff + ori r2,r2,0xffff + mfdcr r1,isram0_dpc + and r1,r1,r2 /* Disable parity check */ + mtdcr isram0_dpc,r1 + mfdcr r1,isram0_pmeg + and r1,r1,r2 /* Disable pwr mgmt */ + mtdcr isram0_pmeg,r1 + + /* + * Copy SPL from cache into internal SRAM + */ + li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1 + mtctr r4 + lis r2,CFG_NAND_BOOT_SPL_SRC@h + ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l + lis r3,CFG_NAND_BOOT_SPL_DST@h + ori r3,r3,CFG_NAND_BOOT_SPL_DST@l +spl_loop: + lwzu r4,4(r2) + stwu r4,4(r3) + bdnz spl_loop + + /* + * Jump to code in RAM + */ + bl 00f +00: mflr r10 + lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h + ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l + sub r10,r10,r3 + addi r10,r10,28 + mtlr r10 + blr + +start_ram: + sync + isync +#endif + + bl 3f b _start 3: li r0,0 @@ -366,6 +443,7 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ * r3 - 1st arg to board_init(): IMMP pointer * r4 - 2nd arg to board_init(): boot flag */ +#ifndef CONFIG_NAND_SPL .text .long 0x27051956 /* U-Boot Magic Number */ .globl version_string @@ -379,6 +457,7 @@ version_string: * location (0x100) is where the CriticalInput Execption should be. */ . = EXC_OFF_SYS_RESET +#endif .globl _start _start: @@ -417,7 +496,8 @@ _start: /* Setup the internal SRAM */ /*----------------------------------------------------------------*/ li r0,0 -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) + +#ifdef CFG_INIT_RAM_DCACHE /* Clear Dcache to use as RAM */ addis r3,r0,CFG_INIT_RAM_ADDR@h ori r3,r3,CFG_INIT_RAM_ADDR@l @@ -433,19 +513,22 @@ _start: dcbz r0,r3 addi r3,r3,32 bdnz ..d_ag -#else -#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#endif /* CFG_INIT_RAM_DCACHE */ + + /* 440EP & 440GR are only 440er PPC's without internal SRAM */ +#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) + /* not all PPC's have internal SRAM usable as L2-cache */ +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */ #endif - mtdcr isram0_sb1cr,r0 /* Disable bank 1 */ - li r2,0x7fff + lis r2,0x7fff ori r2,r2,0xffff mfdcr r1,isram0_dpc and r1,r1,r2 /* Disable parity check */ mtdcr isram0_dpc,r1 mfdcr r1,isram0_pmeg - andis. r1,r1,r2 /* Disable pwr mgmt */ + and r1,r1,r2 /* Disable pwr mgmt */ mtdcr isram0_pmeg,r1 lis r1,0x8000 /* BAS = 8000_0000 */ @@ -474,11 +557,12 @@ _start: lis r1, 0x0003 ori r1,r1, 0x0984 /* fourth 64k */ mtdcr isram0_sb3cr,r1 -#else +#elif defined(CONFIG_440GP) ori r1,r1,0x0380 /* 8k rw */ mtdcr isram0_sb0cr,r1 + mtdcr isram0_sb1cr,r0 /* Disable bank 1 */ #endif -#endif +#endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */ /*----------------------------------------------------------------*/ /* Setup the stack in internal SRAM */ @@ -495,10 +579,14 @@ _start: stwu r1,-8(r1) /* Save back chain and move SP */ stw r0,+12(r1) /* Save return addr (underflow vect) */ +#ifdef CONFIG_NAND_SPL + bl nand_boot /* will not return */ +#else GET_GOT bl cpu_init_f /* run low-level CPU init code (from Flash) */ bl board_init_f +#endif #endif /* CONFIG_440 */ @@ -808,6 +896,7 @@ _start: /*----------------------------------------------------------------------- */ +#ifndef CONFIG_NAND_SPL /*****************************************************************************/ .globl _start_of_vectors _start_of_vectors: @@ -1013,6 +1102,7 @@ crit_return: lwz r1,GPR1(r1) SYNC rfci +#endif /* CONFIG_NAND_SPL */ /* Cache functions. */ @@ -1254,6 +1344,7 @@ ppcSync: /*------------------------------------------------------------------------------*/ +#ifndef CONFIG_NAND_SPL /* * void relocate_code (addr_sp, gd, addr_moni) * @@ -1267,7 +1358,9 @@ ppcSync: */ .globl relocate_code relocate_code: -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SPE) /* * On some 440er platforms the cache is enabled in the first TLB (Boot-CS) * to speed up the boot process. Now this cache needs to be disabled. @@ -1482,22 +1575,22 @@ trap_init: cmplw 0, r7, r8 blt 4b -#if !defined(CONFIG_440GX) && !defined(CONFIG_440SPE) +#if !defined(CONFIG_440) addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */ oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */ mtmsr r7 /* change MSR */ #else - bl __440gx_msr_set - b __440gx_msr_continue + bl __440_msr_set + b __440_msr_continue -__440gx_msr_set: +__440_msr_set: addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */ oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */ mtspr srr1,r7 mflr r7 mtspr srr0,r7 rfi -__440gx_msr_continue: +__440_msr_continue: #endif mtlr r4 /* restore link register */ @@ -1516,6 +1609,7 @@ trap_reloc: stw r0, 4(r7) blr +#endif /* CONFIG_NAND_SPL */ /**************************************************************************/ diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c index bb5765891f..ab852c525c 100644 --- a/cpu/ppc4xx/usb_ohci.c +++ b/cpu/ppc4xx/usb_ohci.c @@ -76,7 +76,7 @@ #define m16_swap(x) swap_16(x) #define m32_swap(x) swap_32(x) -#ifdef CONFIG_440EP +#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) #define ohci_cpu_to_le16(x) (x) #define ohci_cpu_to_le32(x) (x) #else @@ -1599,7 +1599,11 @@ int usb_lowlevel_init(void) gohci.disabled = 1; gohci.sleeping = 0; gohci.irq = -1; - gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000); +#if defined(CONFIG_440EP) + gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000); +#elif defined(CONFIG_440EPX) + gohci.regs = (struct ohci_regs *)(CFG_USB_HOST); +#endif gohci.flags = 0; gohci.slot_name = "ppc440"; diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c index 8262c54bef..6140d2a908 100644 --- a/cpu/ppc4xx/usbdev.c +++ b/cpu/ppc4xx/usbdev.c @@ -3,7 +3,7 @@ #include #include -#ifdef CONFIG_440EP +#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && (CONFIG_COMMANDS & CFG_CMD_USB) #include #include "usbdev.h" @@ -186,6 +186,21 @@ int usbInt(void) return 0; } +#if defined(CONFIG_440EPX) +void usb_dev_init() +{ + printf("USB 2.0 Device init\n"); + + /*usb dev init */ + *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */ + + /*enable interrupts */ + *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f; + + irq_install_handler(VECNUM_HSB2D, (interrupt_handler_t *) usbInt, + NULL); +} +#else void usb_dev_init() { #ifdef USB_2_0_DEVICE @@ -210,5 +225,6 @@ void usb_dev_init() irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt, NULL); } +#endif -#endif /*CONFIG_440EP */ +#endif /* CONFIG_440EP || CONFIG_440EPX */ diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h index 93cef026a3..70e436aab2 100644 --- a/cpu/ppc4xx/vecnum.h +++ b/cpu/ppc4xx/vecnum.h @@ -31,7 +31,94 @@ #ifndef _VECNUMS_H_ #define _VECNUMS_H_ -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440EPX) || defined(CONFIG_440_GRX) + +/* UIC 0 */ +#define VECNUM_U0 0 /* UART 0 */ +#define VECNUM_U1 1 /* UART 1 */ +#define VECNUM_IIC0 2 /* IIC */ +#define VECNUM_KRD 3 /* Kasumi Ready for data */ +#define VECNUM_KDA 4 /* Kasumi Data Available */ +#define VECNUM_PCRW 5 /* PCI command register write */ +#define VECNUM_PPM 6 /* PCI power management */ +#define VECNUM_IIC1 7 /* IIC */ +#define VECNUM_SPI 8 /* SPI */ +#define VECNUM_EPCISER 9 /* External PCI SERR */ +#define VECNUM_MTE 10 /* MAL TXEOB */ +#define VECNUM_MRE 11 /* MAL RXEOB */ +#define VECNUM_D0 12 /* DMA channel 0 */ +#define VECNUM_D1 13 /* DMA channel 1 */ +#define VECNUM_D2 14 /* DMA channel 2 */ +#define VECNUM_D3 15 /* DMA channel 3 */ +#define VECNUM_UD0 16 /* UDMA irq 0 */ +#define VECNUM_UD1 17 /* UDMA irq 1 */ +#define VECNUM_UD2 18 /* UDMA irq 2 */ +#define VECNUM_UD3 19 /* UDMA irq 3 */ +#define VECNUM_HSB2D 20 /* USB2.0 Device */ +#define VECNUM_USBDEV 20 /* USB 1.1/USB 2.0 Device */ +#define VECNUM_OHCI1 21 /* USB2.0 Host OHCI irq 1 */ +#define VECNUM_OHCI2 22 /* USB2.0 Host OHCI irq 2 */ +#define VECNUM_EIP94 23 /* Security EIP94 */ +#define VECNUM_ETH0 24 /* Emac 0 */ +#define VECNUM_ETH1 25 /* Emac 1 */ +#define VECNUM_EHCI 26 /* USB2.0 Host EHCI */ +#define VECNUM_EIR4 27 /* External interrupt 4 */ +#define VECNUM_UIC2NC 28 /* UIC2 non-critical interrupt */ +#define VECNUM_UIC2C 29 /* UIC2 critical interrupt */ +#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ +#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ + +/* UIC 1 */ +#define VECNUM_MS (32 + 0) /* MAL SERR */ +#define VECNUM_MTDE (32 + 1) /* MAL TXDE */ +#define VECNUM_MRDE (32 + 2) /* MAL RXDE */ +#define VECNUM_U2 (32 + 3) /* UART 2 */ +#define VECNUM_U3 (32 + 4) /* UART 3 */ +#define VECNUM_EBCO (32 + 5) /* EBCO interrupt status */ +#define VECNUM_NDFC (32 + 6) /* NDFC */ +#define VECNUM_KSLE (32 + 7) /* KASUMI slave error */ +#define VECNUM_CT5 (32 + 8) /* GPT compare timer 5 */ +#define VECNUM_CT6 (32 + 9) /* GPT compare timer 6 */ +#define VECNUM_PLB34I0 (32 + 10) /* PLB3X4X MIRQ0 */ +#define VECNUM_PLB34I1 (32 + 11) /* PLB3X4X MIRQ1 */ +#define VECNUM_PLB34I2 (32 + 12) /* PLB3X4X MIRQ2 */ +#define VECNUM_PLB34I3 (32 + 13) /* PLB3X4X MIRQ3 */ +#define VECNUM_PLB34I4 (32 + 14) /* PLB3X4X MIRQ4 */ +#define VECNUM_PLB34I5 (32 + 15) /* PLB3X4X MIRQ5 */ +#define VECNUM_CT0 (32 + 16) /* GPT compare timer 0 */ +#define VECNUM_CT1 (32 + 17) /* GPT compare timer 1 */ +#define VECNUM_EIR7 (32 + 18) /* External interrupt 7 */ +#define VECNUM_EIR8 (32 + 19) /* External interrupt 8 */ +#define VECNUM_EIR9 (32 + 20) /* External interrupt 9 */ +#define VECNUM_CT2 (32 + 21) /* GPT compare timer 2 */ +#define VECNUM_CT3 (32 + 22) /* GPT compare timer 3 */ +#define VECNUM_CT4 (32 + 23) /* GPT compare timer 4 */ +#define VECNUM_SRE (32 + 24) /* Serial ROM error */ +#define VECNUM_GPTDC (32 + 25) /* GPT decrementer pulse */ +#define VECNUM_RSVD0 (32 + 26) /* Reserved */ +#define VECNUM_EPCIPER (32 + 27) /* External PCI PERR */ +#define VECNUM_EIR0 (32 + 28) /* External interrupt 0 */ +#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */ +#define VECNUM_EIR1 (32 + 30) /* External interrupt 1 */ +#define VECNUM_EWU1 (32 + 31) /* Ethernet 1 wakeup */ + +#define VECNUM_TXDE VECNUM_MTDE +#define VECNUM_RXDE VECNUM_MRDE + +/* UIC 2 */ +#define VECNUM_EIR5 (62 + 0) /* External interrupt 5 */ +#define VECNUM_EIR6 (62 + 1) /* External interrupt 6 */ +#define VECNUM_OPB (62 + 2) /* OPB to PLB bridge int stat */ +#define VECNUM_EIR2 (62 + 3) /* External interrupt 2 */ +#define VECNUM_EIR3 (62 + 4) /* External interrupt 3 */ +#define VECNUM_DDR2 (62 + 5) /* DDR2 sdram */ +#define VECNUM_MCTX0 (62 + 6) /* MAl intp coalescence TX0 */ +#define VECNUM_MCTX1 (62 + 7) /* MAl intp coalescence TX1 */ +#define VECNUM_MCTR0 (62 + 8) /* MAl intp coalescence TR0 */ +#define VECNUM_MCTR1 (62 + 9) /* MAl intp coalescence TR1 */ + +#elif defined(CONFIG_440SPE) + /* UIC 0 */ #define VECNUM_U0 0 /* UART0 */ #define VECNUM_U1 1 /* UART1 */ diff --git a/doc/README.nand-boot-ppc440 b/doc/README.nand-boot-ppc440 new file mode 100644 index 0000000000..a82a10ee6a --- /dev/null +++ b/doc/README.nand-boot-ppc440 @@ -0,0 +1,36 @@ +----------------------------- +NAND boot on PPC440 platforms +----------------------------- + +This document describes the U-Boot NAND boot feature as it +is implemented for the AMCC Sequoia (PPC440EPx) board. + +The PPC440EP(x)/GR(x) cpu's can boot directly from NAND FLASH, +completely without NOR FLASH. This can be done by using the NAND +boot feature of the 440 NAND flash controller (NDFC). + +Here a short desciption of the different boot stages: + +a) IPL (Initial Program Loader, integrated inside CPU) +------------------------------------------------------ +Will load first 4k from NAND (SPL) into cache and execute it from there. + +b) SPL (Secondary Program Loader) +--------------------------------- +Will load special U-Boot version (NUB) from NAND and execute it. This SPL +has to fit into 4kByte. It sets up the CPU and configures the SDRAM +controller and the NAND controller so that the special U-Boot image can be +loaded from NAND to SDRAM. +This special image is build in the directory "nand_spl". + +c) NUB (NAND U-Boot) +-------------------- +This NAND U-Boot (NUB) is a special U-Boot version which can be started +from RAM. Therefore it mustn't (re-)configure the SDRAM controller. + +On 440EPx the SPL is copied to internal SRAM before the NAND controller +is set up. While still running from cache, I experienced problems accessing +the NAND controller. + + +September 07 2006, Stefan Roese diff --git a/dtt/lm75.c b/dtt/lm75.c index 59daa45397..63f3b7551e 100644 --- a/dtt/lm75.c +++ b/dtt/lm75.c @@ -146,8 +146,13 @@ static int _dtt_init(int sensor) /* * Setup configuraton register */ +#ifdef CONFIG_DTT_AD7414 + /* config = alert active low and disabled */ + val = 0x60; +#else /* config = 6 sample integration, int mode, active low, and enable */ val = 0x18; +#endif if (dtt_write(sensor, DTT_CONFIG, val) != 0) return 1; diff --git a/include/405_mal.h b/include/405_mal.h index 0598586953..2a421848b4 100644 --- a/include/405_mal.h +++ b/include/405_mal.h @@ -92,7 +92,7 @@ #define MAL_ESR_PBEI 0x00000001 /* ^^ ^^ */ /* Mal IER */ -#ifdef CONFIG_440SPE +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define MAL_IER_PT 0x00000080 #define MAL_IER_PRE 0x00000040 #define MAL_IER_PWE 0x00000020 diff --git a/include/440_i2c.h b/include/440_i2c.h index 9c90a9e3c4..0c2bf36273 100644 --- a/include/440_i2c.h +++ b/include/440_i2c.h @@ -1,7 +1,8 @@ #ifndef _440_i2c_h_ #define _440_i2c_h_ -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700) #else #define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400) diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 44b23f1eb4..bbd3497c50 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -728,6 +728,10 @@ #define PVR_440EP_RC 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */ #define PVR_440GR_RA 0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */ #define PVR_440GR_RB 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */ +#define PVR_440EPX1_RA 0x216218D0 /* 440EPX rev A with Security / Kasumi */ +#define PVR_440EPX2_RA 0x216218D4 /* 440EPX rev A without Security / Kasumi */ +#define PVR_440GRX1_RA 0x216218D8 /* 440GRX rev A with Security / Kasumi */ +#define PVR_440GRX2_RA 0x216218DC /* 440GRX rev A without Security / Kasumi */ #define PVR_440GX_RA 0x51B21850 #define PVR_440GX_RB 0x51B21851 #define PVR_440GX_RC 0x51B21892 diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h index f7aa55f334..794a6d4974 100644 --- a/include/asm-ppc/u-boot.h +++ b/include/asm-ppc/u-boot.h @@ -108,7 +108,8 @@ typedef struct bd_info { #endif #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \ - defined(CONFIG_440EP) || defined(CONFIG_440GR) + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) unsigned int bi_opbfreq; /* OPB clock in Hz */ int bi_iic_fast[2]; /* Use fast i2c mode */ #endif diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index cd4339b582..4961011b5c 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -73,6 +73,7 @@ /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in SDRAM) *----------------------------------------------------------------------*/ +#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (4 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 50c1c4fd4c..23bdfc8dfb 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -63,6 +63,7 @@ /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in SDRAM) *----------------------------------------------------------------------*/ +#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (8 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h new file mode 100644 index 0000000000..d3fcc032aa --- /dev/null +++ b/include/configs/sequoia.h @@ -0,0 +1,431 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2006 + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * sequoia.h - configuration for Sequoia board (PowerPC440EPx) + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_SEQUOIA 1 /* Board is Sequoia */ +#define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ + +#define CFG_BOOT_BASE_ADDR 0xf0000000 +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */ +#define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + +/* Don't change either of these */ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ + +#define CFG_USB2D0_BASE 0xe0000100 +#define CFG_USB_DEVICE 0xe0000000 +#define CFG_USB_HOST 0xe0000400 +#define CFG_BCSR_BASE 0xc0000000 + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer + *----------------------------------------------------------------------*/ +#if 0 +/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ +#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ +#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ +#else +#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ +#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ +#endif + +#define CFG_INIT_RAM_END (4 << 10) +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI 1 +/* define this if you want console on UART1 */ +#undef CONFIG_UART1_CONSOLE + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +/* + * Define here the location of the environment variables (FLASH or EEPROM). + * Note: DENX encourages to use redundant environment in FLASH. + */ +#if 1 /* test-only */ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#else +#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#endif +#if 0 +#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#endif + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * NAND FLASH + *----------------------------------------------------------------------*/ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CFG_NAND_BASE CFG_NAND_ADDR + +/* + * IPL (Initial Program Loader, integrated inside CPU) + * Will load first 4k from NAND (SPL) into cache and execute it from there. + * + * SPL (Secondary Program Loader) + * Will load special U-Boot version (NUB) from NAND and execute it. This SPL + * has to fit into 4kByte. It sets up the CPU and configures the SDRAM + * controller and the NAND controller so that the special U-Boot image can be + * loaded from NAND to SDRAM. + * + * NUB (NAND U-Boot) + * This NAND U-Boot (NUB) is a special U-Boot version which can be started + * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. + * + * On 440EPx the SPL is copied to SDRAM before the NAND controller is + * set up. While still running from cache, I experienced problems accessing + * the NAND controller. sr - 2006-08-25 + */ +#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ +#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ +#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_BASE + (12 << 10)) /* Copy SPL here */ +#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ +#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ +#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) + +/* + * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) + */ +#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ + +/* + * Now the NAND chip has to be defined (no autodetection used!) + */ +#define CFG_NAND_PAGE_SIZE (512) /* NAND chip page size */ +#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ +#define CFG_NAND_PAGE_COUNT (32) /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS (5) /* Location of bad block marker */ +#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ + +#ifdef CFG_ENV_IS_IN_NAND +#define CFG_ENV_SIZE 0x4000 +#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_NAND_U_BOOT_SIZE) +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CFG_MBYTES_SDRAM (256) /* 256MB */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#ifdef CFG_ENV_IS_IN_EEPROM +#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */ +#define CFG_ENV_OFFSET 0x0 +#endif /* CFG_ENV_IS_IN_EEPROM */ + +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_AD7414 1 /* use AD7414 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=sequoia\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "bootfile=/tftpboot/sequoia/uImage\0" \ + "kernel_addr=FE000000\0" \ + "ramdisk_addr=FE180000\0" \ + "load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0" \ + "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ + "cp.b 100000 FFFA0000 60000\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_M88E1111_PHY 1 +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ + +#define CONFIG_HAS_ETH0 +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NET_MULTI 1 +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY1_ADDR 1 + +/* USB */ +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/* Comment this out to enable USB 1.1 device */ +#define USB_2_0_DEVICE + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_DTT | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NAND | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CFG_CMD_USB ) + +#define CONFIG_SUPPORT_VFAT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------*/ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE +#define CFG_NAND 0xD0000000 +#define CFG_CPLD 0xC0000000 + +/* + * On Sequoia CS0 and CS3 are switched when configuring for NAND booting + */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CFG_NAND_CS 3 /* NAND chip connected to CSx */ +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x03017300 +#define CFG_EBC_PB0CR (CFG_FLASH | 0xba000) + +/* Memory Bank 3 (NAND-FLASH) initialization */ +#define CFG_EBC_PB3AP 0x018003c0 +#define CFG_EBC_PB3CR (CFG_NAND | 0x1c000) +#else +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ +/* Memory Bank 3 (NOR-FLASH) initialization */ +#define CFG_EBC_PB3AP 0x03017300 +#define CFG_EBC_PB3CR (CFG_FLASH | 0xba000) + +/* Memory Bank 0 (NAND-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x018003c0 +#define CFG_EBC_PB0CR (CFG_NAND | 0x1c000) +#endif + +/* Memory Bank 2 (CPLD) initialization */ +#define CFG_EBC_PB2AP 0x24814580 +#define CFG_EBC_PB2CR (CFG_CPLD | 0x38000) + +/*----------------------------------------------------------------------- + * Cache Configuration + *----------------------------------------------------------------------*/ +#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h index cf42b666b0..bcafd8ba8b 100644 --- a/include/configs/yellowstone.h +++ b/include/configs/yellowstone.h @@ -65,6 +65,7 @@ /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in SDRAM) *----------------------------------------------------------------------*/ +#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (8 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 86a85b8a6d..3d7b4a2f4b 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -65,6 +65,7 @@ /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in SDRAM) *----------------------------------------------------------------------*/ +#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (8 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ diff --git a/include/linux/mtd/compat.h b/include/linux/mtd/compat.h index 460cd45c80..fe55087ea9 100644 --- a/include/linux/mtd/compat.h +++ b/include/linux/mtd/compat.h @@ -31,11 +31,13 @@ #define max_t(type,x,y) \ ({ type __x = (x); type __y = (y); __x > __y ? __x: __y; }) +#ifndef BUG #define BUG() do { \ printf("U-Boot BUG at %s:%d!\n", __FILE__, __LINE__); \ } while (0) #define BUG_ON(condition) do { if (condition) BUG(); } while(0) +#endif /* BUG */ #define likely(x) __builtin_expect(!!(x), 1) #define unlikely(x) __builtin_expect(!!(x), 0) diff --git a/include/linux/mtd/ndfc.h b/include/linux/mtd/ndfc.h new file mode 100644 index 0000000000..d0558a9826 --- /dev/null +++ b/include/linux/mtd/ndfc.h @@ -0,0 +1,67 @@ +/* + * linux/include/linux/mtd/ndfc.h + * + * Copyright (c) 2006 Thomas Gleixner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Info: + * Contains defines, datastructures for ndfc nand controller + * + */ +#ifndef __LINUX_MTD_NDFC_H +#define __LINUX_MTD_NDFC_H + +/* NDFC Register definitions */ +#define NDFC_CMD 0x00 +#define NDFC_ALE 0x04 +#define NDFC_DATA 0x08 +#define NDFC_ECC 0x10 +#define NDFC_BCFG0 0x30 +#define NDFC_BCFG1 0x34 +#define NDFC_BCFG2 0x38 +#define NDFC_BCFG3 0x3c +#define NDFC_CCR 0x40 +#define NDFC_STAT 0x44 +#define NDFC_HWCTL 0x48 +#define NDFC_REVID 0x50 + +#define NDFC_STAT_IS_READY 0x01000000 + +#define NDFC_CCR_RESET_CE 0x80000000 /* CE Reset */ +#define NDFC_CCR_RESET_ECC 0x40000000 /* ECC Reset */ +#define NDFC_CCR_RIE 0x20000000 /* Interrupt Enable on Device Rdy */ +#define NDFC_CCR_REN 0x10000000 /* Enable wait for Rdy in LinearR */ +#define NDFC_CCR_ROMEN 0x08000000 /* Enable ROM In LinearR */ +#define NDFC_CCR_ARE 0x04000000 /* Auto-Read Enable */ +#define NDFC_CCR_BS(x) (((x) & 0x3) << 24) /* Select Bank on CE[x] */ +#define NDFC_CCR_BS_MASK 0x03000000 /* Select Bank */ +#define NDFC_CCR_ARAC0 0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */ +#define NDFC_CCR_ARAC1 0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */ +#define NDFC_CCR_ARAC2 0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */ +#define NDFC_CCR_ARAC3 0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */ +#define NDFC_CCR_ARAC_MASK 0x00003000 /* Auto-Read mode Addr Cycles */ +#define NDFC_CCR_RPG 0x0000C000 /* Auto-Read Page */ +#define NDFC_CCR_EBCC 0x00000004 /* EBC Configuration Completed */ +#define NDFC_CCR_DHC 0x00000002 /* Direct Hardware Control Enable */ + +#define NDFC_BxCFG_EN 0x80000000 /* Bank Enable */ +#define NDFC_BxCFG_CED 0x40000000 /* nCE Style */ +#define NDFC_BxCFG_SZ_MASK 0x08000000 /* Bank Size */ +#define NDFC_BxCFG_SZ_8BIT 0x00000000 /* 8bit */ +#define NDFC_BxCFG_SZ_16BIT 0x08000000 /* 16bit */ + +#define NDFC_MAX_BANKS 4 + +struct ndfc_controller_settings { + uint32_t ccr_settings; + uint64_t ndfc_erpn; +}; + +struct ndfc_chip_settings { + uint32_t bank_settings; +}; + +#endif diff --git a/include/ppc440.h b/include/ppc440.h index d5a9f66a41..c4a3ed5483 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -82,7 +82,10 @@ #define ivor13 0x19d /* interrupt vector offset register 13 */ #define ivor14 0x19e /* interrupt vector offset register 14 */ #define ivor15 0x19f /* interrupt vector offset register 15 */ -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define mcsrr0 0x23a /* machine check save/restore register 0 */ #define mcsrr1 0x23b /* mahcine check save/restore register 1 */ #define mcsr 0x23c /* machine check status register */ @@ -151,7 +154,18 @@ #define sdr_ecid1 0x0081 #define sdr_ecid2 0x0082 #define sdr_jtag 0x00c0 +#if !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) #define sdr_ddrdl 0x00e0 +#else +#define sdr_cfg 0x00e0 +#define SDR_CFG_LT2_MASK 0x01000000 /* Leakage test 2*/ +#define SDR_CFG_64_32BITS_MASK 0x01000000 /* Switch DDR 64 bits or 32 bits */ +#define SDR_CFG_32BITS 0x00000000 /* 32 bits */ +#define SDR_CFG_64BITS 0x01000000 /* 64 bits */ +#define SDR_CFG_MC_V2518_MASK 0x02000000 /* Low VDD2518 (2.5 or 1.8V) */ +#define SDR_CFG_MC_V25 0x00000000 /* 2.5 V */ +#define SDR_CFG_MC_V18 0x02000000 /* 1.8 V */ +#endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */ #define sdr_ebc 0x0100 #define sdr_uart0 0x0120 /* UART0 Config */ #define sdr_uart1 0x0121 /* UART1 Config */ @@ -180,6 +194,54 @@ #define sdr_plbtr 0x4200 #define sdr_mfr 0x4300 /* SDR0_MFR reg */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* test-only!!!! */ +#define DDR0_00 0x00 +#define DDR0_01 0x01 +#define DDR0_02 0x02 +#define DDR0_03 0x03 +#define DDR0_04 0x04 +#define DDR0_05 0x05 +#define DDR0_06 0x06 +#define DDR0_07 0x07 +#define DDR0_08 0x08 +#define DDR0_09 0x09 +#define DDR0_10 0x0A +#define DDR0_11 0x0B +#define DDR0_12 0x0C +#define DDR0_13 0x0D +#define DDR0_14 0x0E +#define DDR0_15 0x0F +#define DDR0_16 0x10 +#define DDR0_17 0x11 +#define DDR0_18 0x12 +#define DDR0_19 0x13 +#define DDR0_20 0x14 +#define DDR0_21 0x15 +#define DDR0_22 0x16 +#define DDR0_23 0x17 +#define DDR0_24 0x18 +#define DDR0_25 0x19 +#define DDR0_26 0x1A +#define DDR0_27 0x1B +#define DDR0_28 0x1C +#define DDR0_29 0x1D +#define DDR0_30 0x1E +#define DDR0_31 0x1F +#define DDR0_32 0x20 +#define DDR0_33 0x21 +#define DDR0_34 0x22 +#define DDR0_35 0x23 +#define DDR0_36 0x24 +#define DDR0_37 0x25 +#define DDR0_38 0x26 +#define DDR0_39 0x27 +#define DDR0_40 0x28 +#define DDR0_41 0x29 +#define DDR0_42 0x2A +#define DDR0_43 0x2B +#define DDR0_44 0x2C +#endif /*CONFIG_440EPX*/ + /*----------------------------------------------------------------------------- | SDRAM Controller +----------------------------------------------------------------------------*/ @@ -787,7 +849,8 @@ #define xbcfg 0x23 /* external bus configuration reg */ #define xbcid 0x24 /* external bus core id reg */ -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* PLB4 to PLB3 Bridge OUT */ #define P4P3_DCR_BASE 0x020 @@ -877,6 +940,7 @@ #define plb1_bearl (PLB_ARBITER_BASE+ 0x0C) #define plb1_bearh (PLB_ARBITER_BASE+ 0x0D) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) /* Pin Function Control Register 1 */ #define SDR0_PFC1 0x4101 #define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */ @@ -918,6 +982,178 @@ #define SDR0_USB0_LEEN_DISABLE 0x00000000 /* Little Endian Disable */ #define SDR0_USB0_LEEN_ENABLE 0x00000001 /* Little Endian Enable */ +/* Miscealleneaous Function Reg. */ +#define SDR0_MFR 0x4300 +#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */ +#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000 +#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */ +#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000 +#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */ +#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */ +#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */ +#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */ +#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */ +#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */ +#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */ +#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3) + +#define SDR0_MFR_ERRATA3_EN0 0x00800000 +#define SDR0_MFR_ERRATA3_EN1 0x00400000 +#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */ +#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Enable on both EMAC3 0-1 */ +#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */ +#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */ +#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */ + +#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */ + +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define SDR_USB2D0CR 0x0320 +#define SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK 0x00000004 /* USB 2.0 Device/EBC Master Selection */ +#define SDR0_USB2D0CR_USB2DEV_SELECTION 0x00000004 /* USB 2.0 Device Selection */ +#define SDR0_USB2D0CR_EBC_SELECTION 0x00000000 /* EBC Selection */ + +#define SDR0_USB2D0CR_USB_DEV_INT_SEL_MASK 0x00000002 /* USB Device Interface Selection */ +#define SDR0_USB2D0CR_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */ +#define SDR0_USB2D0CR_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */ + +#define SDR0_USB2D0CR_LEEN_MASK 0x00000001 /* Little Endian selection */ +#define SDR0_USB2D0CR_LEEN_DISABLE 0x00000000 /* Little Endian Disable */ +#define SDR0_USB2D0CR_LEEN_ENABLE 0x00000001 /* Little Endian Enable */ + +/* USB2 Host Control Register */ +#define SDR0_USB2H0CR 0x0340 +#define SDR0_USB2H0CR_WDINT_MASK 0x00000001 /* Host UTMI Word Interface */ +#define SDR0_USB2H0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit/60MHz */ +#define SDR0_USB2H0CR_WDINT_16BIT_30MHZ 0x00000001 /* 16-bit/30MHz */ +#define SDR0_USB2H0CR_EFLADJ_MASK 0x0000007e /* EHCI Frame Length Adjustment */ + +/* Pin Function Control Register 1 */ +#define SDR0_PFC1 0x4101 +#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */ +#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */ +#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */ + +#define SDR0_PFC1_SELECT_MASK 0x01C00000 /* Ethernet Pin Select EMAC 0 */ +#define SDR0_PFC1_SELECT_CONFIG_1_1 0x00C00000 /* 1xMII using RGMII bridge */ +#define SDR0_PFC1_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */ +#define SDR0_PFC1_SELECT_CONFIG_2 0x00C00000 /* 1xGMII using RGMII bridge */ +#define SDR0_PFC1_SELECT_CONFIG_3 0x01000000 /* 1xTBI using RGMII bridge */ +#define SDR0_PFC1_SELECT_CONFIG_4 0x01400000 /* 2xRGMII using RGMII bridge */ +#define SDR0_PFC1_SELECT_CONFIG_5 0x01800000 /* 2xRTBI using RGMII bridge */ +#define SDR0_PFC1_SELECT_CONFIG_6 0x00800000 /* 2xSMII using ZMII bridge */ + +#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */ +#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */ +#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */ +#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */ +#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */ +#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */ +#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */ +#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */ +#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */ +#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold Req Selection */ +#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */ +#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */ +#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5) Selection */ +#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */ +#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */ +#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27) Selection */ +#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En. Selected */ +#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */ +#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject Selection */ +#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject Disable */ +#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject Enable */ + +#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor En. Selection */ +#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor Enable */ +#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */ +#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */ + +/* Ethernet PLL Configuration Register */ +#define SDR0_PFC2 0x4102 +#define SDR0_PFC2_TUNE_MASK 0x01FF8000 /* Loop stability tuning bits */ +#define SDR0_PFC2_MULTI_MASK 0x00007C00 /* Frequency multiplication selector */ +#define SDR0_PFC2_RANGEB_MASK 0x00000380 /* PLLOUTB/C frequency selector */ +#define SDR0_PFC2_RANGEA_MASK 0x00000071 /* PLLOUTA frequency selector */ + +#define SDR0_PFC2_SELECT_MASK 0xE0000000 /* Ethernet Pin select EMAC1 */ +#define SDR0_PFC2_SELECT_CONFIG_1_1 0x60000000 /* 1xMII using RGMII bridge */ +#define SDR0_PFC2_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */ +#define SDR0_PFC2_SELECT_CONFIG_2 0x60000000 /* 1xGMII using RGMII bridge */ +#define SDR0_PFC2_SELECT_CONFIG_3 0x80000000 /* 1xTBI using RGMII bridge */ +#define SDR0_PFC2_SELECT_CONFIG_4 0xA0000000 /* 2xRGMII using RGMII bridge */ +#define SDR0_PFC2_SELECT_CONFIG_5 0xC0000000 /* 2xRTBI using RGMII bridge */ +#define SDR0_PFC2_SELECT_CONFIG_6 0x40000000 /* 2xSMII using ZMII bridge */ + +/* USB2PHY0 Control Register */ +#define SDR0_USB2PHY0CR 0x4103 +#define SDR0_USB2PHY0CR_UTMICN_MASK 0x00100000 /* PHY UTMI interface connection */ +#define SDR0_USB2PHY0CR_UTMICN_DEV 0x00000000 /* Device support */ +#define SDR0_USB2PHY0CR_UTMICN_HOST 0x00100000 /* Host support */ + +#define SDR0_USB2PHY0CR_DWNSTR_MASK 0x00400000 /* Select downstream port mode */ +#define SDR0_USB2PHY0CR_DWNSTR_DEV 0x00000000 /* Device */ +#define SDR0_USB2PHY0CR_DWNSTR_HOST 0x00400000 /* Host */ + +#define SDR0_USB2PHY0CR_DVBUS_MASK 0x00800000 /* VBus detect (Device mode only) */ +#define SDR0_USB2PHY0CR_DVBUS_PURDIS 0x00000000 /* Pull-up resistance on D+ is disabled */ +#define SDR0_USB2PHY0CR_DVBUS_PUREN 0x00800000 /* Pull-up resistance on D+ is enabled */ + +#define SDR0_USB2PHY0CR_WDINT_MASK 0x01000000 /* PHY UTMI data width and clock select */ +#define SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit data/60MHz */ +#define SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ 0x01000000 /* 16-bit data/30MHz */ + +#define SDR0_USB2PHY0CR_LOOPEN_MASK 0x02000000 /* Loop back test enable */ +#define SDR0_USB2PHY0CR_LOOP_ENABLE 0x00000000 /* Loop back disabled */ +#define SDR0_USB2PHY0CR_LOOP_DISABLE 0x02000000 /* Loop back enabled (only test purposes) */ + +#define SDR0_USB2PHY0CR_XOON_MASK 0x04000000 /* Force XO block on during a suspend */ +#define SDR0_USB2PHY0CR_XO_ON 0x00000000 /* PHY XO block is powered-on */ +#define SDR0_USB2PHY0CR_XO_OFF 0x04000000 /* PHY XO block is powered-off when all ports are suspended */ + +#define SDR0_USB2PHY0CR_PWRSAV_MASK 0x08000000 /* Select PHY power-save mode */ +#define SDR0_USB2PHY0CR_PWRSAV_OFF 0x00000000 /* Non-power-save mode */ +#define SDR0_USB2PHY0CR_PWRSAV_ON 0x08000000 /* Power-save mode. Valid only for full-speed operation */ + +#define SDR0_USB2PHY0CR_XOREF_MASK 0x10000000 /* Select reference clock source */ +#define SDR0_USB2PHY0CR_XOREF_INTERNAL 0x00000000 /* PHY PLL uses chip internal 48M clock as a reference */ +#define SDR0_USB2PHY0CR_XOREF_XO 0x10000000 /* PHY PLL uses internal XO block output as a reference */ + +#define SDR0_USB2PHY0CR_XOCLK_MASK 0x20000000 /* Select clock for XO block */ +#define SDR0_USB2PHY0CR_XOCLK_EXTERNAL 0x00000000 /* PHY macro used an external clock */ +#define SDR0_USB2PHY0CR_XOCLK_CRYSTAL 0x20000000 /* PHY macro uses the clock from a crystal */ + +#define SDR0_USB2PHY0CR_CLKSEL_MASK 0xc0000000 /* Select ref clk freq */ +#define SDR0_USB2PHY0CR_CLKSEL_12MHZ 0x00000000 /* Select ref clk freq = 12 MHz*/ +#define SDR0_USB2PHY0CR_CLKSEL_48MHZ 0x40000000 /* Select ref clk freq = 48 MHz*/ +#define SDR0_USB2PHY0CR_CLKSEL_24MHZ 0x80000000 /* Select ref clk freq = 24 MHz*/ + +/* Miscealleneaous Function Reg. */ +#define SDR0_MFR 0x4300 +#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */ +#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000 +#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */ +#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000 +#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */ +#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */ +#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */ +#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */ +#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */ +#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3) + +#define SDR0_MFR_ERRATA3_EN0 0x00800000 +#define SDR0_MFR_ERRATA3_EN1 0x00400000 +#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */ +#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Enable on both EMAC3 0-1 */ +#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */ +#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */ +#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */ + +#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */ + /* CUST0 Customer Configuration Register0 */ #define SDR0_CUST0 0x4000 #define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */ @@ -1007,27 +1243,18 @@ #define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */ #define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */ -/* Miscealleneaous Function Reg. */ -#define SDR0_MFR 0x4300 -#define SDR0_MFR_ETH0_CLK_SEL 0x08000000 /* Ethernet0 Clock Select */ -#define SDR0_MFR_ETH1_CLK_SEL 0x04000000 /* Ethernet1 Clock Select */ -#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */ -#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */ -#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */ -#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */ -#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */ -#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */ -#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */ -#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) -#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3) - -#define SDR0_MFR_ERRATA3_EN0 0x00800000 -#define SDR0_MFR_ERRATA3_EN1 0x00400000 -#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */ -#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */ -#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */ -#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */ -#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */ +/*----------------------------------------------------------------------------- + | Internal SRAM + +----------------------------------------------------------------------------*/ +#define ISRAM0_DCR_BASE 0x380 +#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/ +#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */ +#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */ +#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */ +#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */ +#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */ +#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */ +#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */ #else @@ -1121,7 +1348,7 @@ #define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */ #define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */ -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define UIC2_DCR_BASE 0xe0 #define uic2sr (UIC0_DCR_BASE+0x0) /* UIC2 status-Read Clear */ #define uic2srs (UIC0_DCR_BASE+0x1) /* UIC2 status-Read Set */ @@ -1423,6 +1650,46 @@ #define UIC_EIR6 0x00000004 /* External interrupt 6 */ #define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ #define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ + +#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + +#define UIC_U0 0x80000000 /* UART 0 */ +#define UIC_U1 0x40000000 /* UART 1 */ +#define UIC_IIC0 0x20000000 /* IIC */ +#define UIC_KRD 0x10000000 /* Kasumi Ready for data */ +#define UIC_KDA 0x08000000 /* Kasumi Data Available */ +#define UIC_PCRW 0x04000000 /* PCI command register write */ +#define UIC_PPM 0x02000000 /* PCI power management */ +#define UIC_IIC1 0x01000000 /* IIC */ +#define UIC_SPI 0x00800000 /* SPI */ +#define UIC_EPCISER 0x00400000 /* External PCI SERR */ +#define UIC_MTE 0x00200000 /* MAL TXEOB */ +#define UIC_MRE 0x00100000 /* MAL RXEOB */ +#define UIC_D0 0x00080000 /* DMA channel 0 */ +#define UIC_D1 0x00040000 /* DMA channel 1 */ +#define UIC_D2 0x00020000 /* DMA channel 2 */ +#define UIC_D3 0x00010000 /* DMA channel 3 */ +#define UIC_UD0 0x00008000 /* UDMA irq 0 */ +#define UIC_UD1 0x00004000 /* UDMA irq 1 */ +#define UIC_UD2 0x00002000 /* UDMA irq 2 */ +#define UIC_UD3 0x00001000 /* UDMA irq 3 */ +#define UIC_HSB2D 0x00000800 /* USB2.0 Device */ +#define UIC_OHCI1 0x00000400 /* USB2.0 Host OHCI irq 1 */ +#define UIC_OHCI2 0x00000200 /* USB2.0 Host OHCI irq 2 */ +#define UIC_EIP94 0x00000100 /* Security EIP94 */ +#define UIC_ETH0 0x00000080 /* Emac 0 */ +#define UIC_ETH1 0x00000040 /* Emac 1 */ +#define UIC_EHCI 0x00000020 /* USB2.0 Host EHCI */ +#define UIC_EIR4 0x00000010 /* External interrupt 4 */ +#define UIC_UIC2NC 0x00000008 /* UIC2 non-critical interrupt */ +#define UIC_UIC2C 0x00000004 /* UIC2 critical interrupt */ +#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ +#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ + +/* For compatibility with 405 code */ +#define UIC_MAL_TXEOB UIC_MTE +#define UIC_MAL_RXEOB UIC_MRE + #elif !defined(CONFIG_440SPE) #define UIC_U0 0x80000000 /* UART 0 */ #define UIC_U1 0x40000000 /* UART 1 */ @@ -1531,6 +1798,48 @@ #define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ #define UIC_ETH1 0x00000002 /* Ethernet 1 */ #define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */ + +#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + +#define UIC_MS 0x80000000 /* MAL SERR */ +#define UIC_MTDE 0x40000000 /* MAL TXDE */ +#define UIC_MRDE 0x20000000 /* MAL RXDE */ +#define UIC_U2 0x10000000 /* UART 2 */ +#define UIC_U3 0x08000000 /* UART 3 */ +#define UIC_EBCO 0x04000000 /* EBCO interrupt status */ +#define UIC_NDFC 0x02000000 /* NDFC */ +#define UIC_KSLE 0x01000000 /* KASUMI slave error */ +#define UIC_CT5 0x00800000 /* GPT compare timer 5 */ +#define UIC_CT6 0x00400000 /* GPT compare timer 6 */ +#define UIC_PLB34I0 0x00200000 /* PLB3X4X MIRQ0 */ +#define UIC_PLB34I1 0x00100000 /* PLB3X4X MIRQ1 */ +#define UIC_PLB34I2 0x00080000 /* PLB3X4X MIRQ2 */ +#define UIC_PLB34I3 0x00040000 /* PLB3X4X MIRQ3 */ +#define UIC_PLB34I4 0x00020000 /* PLB3X4X MIRQ4 */ +#define UIC_PLB34I5 0x00010000 /* PLB3X4X MIRQ5 */ +#define UIC_CT0 0x00008000 /* GPT compare timer 0 */ +#define UIC_CT1 0x00004000 /* GPT compare timer 1 */ +#define UIC_EIR7 0x00002000 /* External interrupt 7 */ +#define UIC_EIR8 0x00001000 /* External interrupt 8 */ +#define UIC_EIR9 0x00000800 /* External interrupt 9 */ +#define UIC_CT2 0x00000400 /* GPT compare timer 2 */ +#define UIC_CT3 0x00000200 /* GPT compare timer 3 */ +#define UIC_CT4 0x00000100 /* GPT compare timer 4 */ +#define UIC_SRE 0x00000080 /* Serial ROM error */ +#define UIC_GPTDC 0x00000040 /* GPT decrementer pulse */ +#define UIC_RSVD0 0x00000020 /* Reserved */ +#define UIC_EPCIPER 0x00000010 /* External PCI PERR */ +#define UIC_EIR0 0x00000008 /* External interrupt 0 */ +#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ +#define UIC_EIR1 0x00000002 /* External interrupt 1 */ +#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */ + +/* For compatibility with 405 code */ +#define UIC_MAL_SERR UIC_MS +#define UIC_MAL_TXDE UIC_MTDE +#define UIC_MAL_RXDE UIC_MRDE +#define UIC_ENET UIC_ETH0 + #elif !defined(CONFIG_440SPE) #define UIC_MS 0x80000000 /* MAL SERR */ #define UIC_MTDE 0x40000000 /* MAL TXDE */ @@ -1608,6 +1917,20 @@ #define UIC_RSVD29 0x00000004 /* Reserved */ #define UIC_RSVD30 0x00000002 /* Reserved */ #define UIC_RSVD31 0x00000001 /* Reserved */ + +#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC2 */ + +#define UIC_EIR5 0x80000000 /* External interrupt 5 */ +#define UIC_EIR6 0x40000000 /* External interrupt 6 */ +#define UIC_OPB 0x20000000 /* OPB to PLB bridge interrupt stat */ +#define UIC_EIR2 0x10000000 /* External interrupt 2 */ +#define UIC_EIR3 0x08000000 /* External interrupt 3 */ +#define UIC_DDR2 0x04000000 /* DDR2 sdram */ +#define UIC_MCTX0 0x02000000 /* MAl intp coalescence TX0 */ +#define UIC_MCTX1 0x01000000 /* MAl intp coalescence TX1 */ +#define UIC_MCTR0 0x00800000 /* MAl intp coalescence TR0 */ +#define UIC_MCTR1 0x00400000 /* MAl intp coalescence TR1 */ + #endif /* CONFIG_440GX */ /*---------------------------------------------------------------------------+ @@ -1623,6 +1946,17 @@ #define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \ UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI) + +#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + +#define UICB0_UIC1CI 0x00000000 /* UIC1 Critical Interrupt */ +#define UICB0_UIC1NCI 0x00000000 /* UIC1 Noncritical Interrupt */ +#define UICB0_UIC2CI 0x00000000 /* UIC2 Critical Interrupt */ +#define UICB0_UIC2NCI 0x00000000 /* UIC2 Noncritical Interrupt */ + +#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \ + UICB0_UIC1CI | UICB0_UIC2NCI) + #endif /* CONFIG_440GX */ /*---------------------------------------------------------------------------+ | Universal interrupt controller interrupts @@ -2262,7 +2596,8 @@ #define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13) #define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15) #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 21) #define SDR0_SDSTP1_PAME_MASK (0x80000000 >> 27) #endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */ @@ -2390,11 +2725,81 @@ #define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */ #define SDR0_MFR_ERRATA3_EN0 0x00800000 #define SDR0_MFR_ERRATA3_EN1 0x00400000 +#if defined(CONFIG_440GX) /* test-only: only 440GX or 440SPE??? */ #define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */ #define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */ #define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */ #define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */ #define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */ +#endif + +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define SDR0_PFC1_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<22) +#define SDR0_PFC1_EPS_DECODE(n) ((((unsigned long)(n))>>22)&0x07) +#define SDR0_PFC2_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<29) +#define SDR0_PFC2_EPS_DECODE(n) ((((unsigned long)(n))>>29)&0x07) +#endif + +#define SDR0_MFR_ECS_MASK 0x10000000 +#define SDR0_MFR_ECS_INTERNAL 0x10000000 + +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define SDR0_SRST0 0x200 +#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */ +#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */ +#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */ +#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */ +#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/transmitter 0 */ +#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/transmitter 1 */ +#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */ +#define SDR0_SRST0_USB2H 0x01000000 /* USB2.0 Host */ +#define SDR0_SRST0_GPIO 0x00800000 /* General purpose I/O */ +#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */ +#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */ +#define SDR0_SRST0_PCI 0x00100000 /* PCI */ +#define SDR0_SRST0_EMAC0 0x00080000 /* Ethernet media access controller 0 */ +#define SDR0_SRST0_EMAC1 0x00040000 /* Ethernet media access controller 1 */ +#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */ +#define SDR0_SRST0_ZMII 0x00010000 /* ZMII bridge */ +#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0 */ +#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1 */ +#define SDR0_SRST0_IIC1 0x00002000 /* Inter integrated circuit 1 */ +#define SDR0_SRST0_SCP 0x00001000 /* Serial communications port */ +#define SDR0_SRST0_BGI 0x00000800 /* OPB to PLB bridge */ +#define SDR0_SRST0_DMA 0x00000400 /* Direct memory access controller */ +#define SDR0_SRST0_DMAC 0x00000200 /* DMA channel */ +#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */ +#define SDR0_SRST0_USB2D 0x00000080 /* USB2.0 device */ +#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */ +#define SDR0_SRST0_P4P3 0x00000010 /* PLB4 to PLB3 bridge */ +#define SDR0_SRST0_P3P4 0x00000008 /* PLB3 to PLB4 bridge */ +#define SDR0_SRST0_PLB3 0x00000004 /* PLB3 arbiter */ +#define SDR0_SRST0_UART2 0x00000002 /* Universal asynchronous receiver/transmitter 2 */ +#define SDR0_SRST0_UART3 0x00000001 /* Universal asynchronous receiver/transmitter 3 */ + +#define SDR0_SRST1 0x201 +#define SDR0_SRST1_NDFC 0x80000000 /* Nand flash controller */ +#define SDR0_SRST1_OPBA1 0x40000000 /* OPB Arbiter attached to PLB4 */ +#define SDR0_SRST1_P4OPB0 0x20000000 /* PLB4 to OPB Bridge0 */ +#define SDR0_SRST1_PLB42OPB0 SDR0_SRST1_P4OPB0 +#define SDR0_SRST1_DMA4 0x10000000 /* DMA to PLB4 */ +#define SDR0_SRST1_DMA4CH 0x08000000 /* DMA Channel to PLB4 */ +#define SDR0_SRST1_OPBA2 0x04000000 /* OPB Arbiter attached to PLB4 USB 2.0 Host */ +#define SDR0_SRST1_OPB2PLB40 0x02000000 /* OPB to PLB4 Bridge attached to USB 2.0 Host */ +#define SDR0_SRST1_PLB42OPB1 0x01000000 /* PLB4 to OPB Bridge attached to USB 2.0 Host */ +#define SDR0_SRST1_CPM1 0x00800000 /* Clock and Power management 1 */ +#define SDR0_SRST1_UIC2 0x00400000 /* Universal Interrupt Controller 2 */ +#define SDR0_SRST1_CRYP0 0x00200000 /* Security Engine */ +#define SDR0_SRST1_USB20PHY 0x00100000 /* USB 2.0 Phy */ +#define SDR0_SRST1_USB2HUTMI 0x00080000 /* USB 2.0 Host UTMI Interface */ +#define SDR0_SRST1_USB2HPHY 0x00040000 /* USB 2.0 Host Phy Interface */ +#define SDR0_SRST1_SRAM0 0x00020000 /* Internal SRAM Controller */ +#define SDR0_SRST1_RGMII0 0x00010000 /* RGMII Bridge */ +#define SDR0_SRST1_ETHPLL 0x00008000 /* Ethernet PLL */ +#define SDR0_SRST1_FPU 0x00004000 /* Floating Point Unit */ +#define SDR0_SRST1_KASU0 0x00002000 /* Kasumi Engine */ + +#else #define SDR0_SRST_BGO 0x80000000 #define SDR0_SRST_PLB 0x40000000 @@ -2427,10 +2832,15 @@ #define SDR0_SRST_EMAC3 0x00000008 #define SDR0_SRST_RGMII 0x00000001 +#endif + /*-----------------------------------------------------------------------------+ | Clocking +-----------------------------------------------------------------------------*/ -#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) +#if !defined (CONFIG_440GX) && \ + !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \ + !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \ + !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) #define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */ #define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */ #define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */ @@ -2498,6 +2908,120 @@ #define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */ #endif /* CONFIG_440GX */ +#if defined (CONFIG_440EPX) || defined (CONFIG_440GRX) +/*--------------------------------------*/ +#define CPR0_PLLC 0x40 +#define CPR0_PLLC_RST_MASK 0x80000000 +#define CPR0_PLLC_RST_PLLLOCKED 0x00000000 +#define CPR0_PLLC_RST_PLLRESET 0x80000000 +#define CPR0_PLLC_ENG_MASK 0x40000000 +#define CPR0_PLLC_ENG_DISABLE 0x00000000 +#define CPR0_PLLC_ENG_ENABLE 0x40000000 +#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30) +#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01) +#define CPR0_PLLC_SRC_MASK 0x20000000 +#define CPR0_PLLC_SRC_PLLOUTA 0x00000000 +#define CPR0_PLLC_SRC_PLLOUTB 0x20000000 +#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29) +#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01) +#define CPR0_PLLC_SEL_MASK 0x07000000 +#define CPR0_PLLC_SEL_PLL 0x00000000 +#define CPR0_PLLC_SEL_CPU 0x01000000 +#define CPR0_PLLC_SEL_PER 0x05000000 +#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07) +#define CPR0_PLLC_TUNE_MASK 0x000003FF +#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) +/*--------------------------------------*/ +#define CPR0_PLLD 0x60 +#define CPR0_PLLD_FBDV_MASK 0x1F000000 +#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1) +#define CPR0_PLLD_FWDVA_MASK 0x000F0000 +#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16) +#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1) +#define CPR0_PLLD_FWDVB_MASK 0x00000700 +#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8) +#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1) +#define CPR0_PLLD_LFBDV_MASK 0x0000003F +#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0) +#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1) +/*--------------------------------------*/ +#define CPR0_PRIMAD 0x80 +#define CPR0_PRIMAD_PRADV0_MASK 0x07000000 +#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1) +/*--------------------------------------*/ +#define CPR0_PRIMBD 0xA0 +#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000 +#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1) +/*--------------------------------------*/ +#if 0 +#define CPR0_CPM0_ER 0xB0 /* CPM Enable Register */ +#define CPR0_CPM0_FR 0xB1 /* CPM Force Register */ +#define CPR0_CPM0_SR 0xB2 /* CPM Status Register */ +#define CPR0_CPM0_IIC0 0x80000000 /* Inter-Intergrated Circuit0 */ +#define CPR0_CPM0_IIC1 0x40000000 /* Inter-Intergrated Circuit1 */ +#define CPR0_CPM0_PCI 0x20000000 /* Peripheral Component Interconnect */ +#define CPR0_CPM0_USB1H 0x08000000 /* USB1.1 Host */ +#define CPR0_CPM0_FPU 0x04000000 /* PPC440 FPU */ +#define CPR0_CPM0_CPU 0x02000000 /* PPC440x5 Processor Core */ +#define CPR0_CPM0_DMA 0x01000000 /* Direct Memory Access Controller */ +#define CPR0_CPM0_BGO 0x00800000 /* PLB to OPB Bridge */ +#define CPR0_CPM0_BGI 0x00400000 /* OPB to PLB Bridge */ +#define CPR0_CPM0_EBC 0x00200000 /* External Bus Controller */ +#define CPR0_CPM0_NDFC 0x00100000 /* Nand Flash Controller */ +#define CPR0_CPM0_MADMAL 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */ +#define CPR0_CPM0_DMC 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */ +#define CPR0_CPM0_PLB4 0x00040000 /* PLB4 Arbiter */ +#define CPR0_CPM0_PLB4x3x 0x00020000 /* PLB4 to PLB3 */ +#define CPR0_CPM0_PLB3x4x 0x00010000 /* PLB3 to PLB4 */ +#define CPR0_CPM0_PLB3 0x00008000 /* PLB3 Arbiter */ +#define CPR0_CPM0_PPM 0x00002000 /* PLB Performance Monitor */ +#define CPR0_CPM0_UIC1 0x00001000 /* Universal Interrupt Controller 1 */ +#define CPR0_CPM0_GPIO 0x00000800 /* General Purpose IO */ +#define CPR0_CPM0_GPT 0x00000400 /* General Purpose Timer */ +#define CPR0_CPM0_UART0 0x00000200 /* Universal Asynchronous Rcver/Xmitter 0 */ +#define CPR0_CPM0_UART1 0x00000100 /* Universal Asynchronous Rcver/Xmitter 1 */ +#define CPR0_CPM0_UIC0 0x00000080 /* Universal Interrupt Controller 0 */ +#define CPR0_CPM0_TMRCLK 0x00000040 /* CPU Timer */ +#define CPR0_CPM0_EMC0 0x00000020 /* Ethernet 0 */ +#define CPR0_CPM0_EMC1 0x00000010 /* Ethernet 1 */ +#define CPR0_CPM0_UART2 0x00000008 /* Universal Asynchronous Rcver/Xmitter 2 */ +#define CPR0_CPM0_UART3 0x00000004 /* Universal Asynchronous Rcver/Xmitter 3 */ +#define CPR0_CPM0_USB2D 0x00000002 /* USB2.0 Device */ +#define CPR0_CPM0_USB2H 0x00000001 /* USB2.0 Host */ +#endif +/*--------------------------------------*/ +#define CPR0_OPBD 0xC0 +#define CPR0_OPBD_OPBDV0_MASK 0x03000000 +#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) +/*--------------------------------------*/ +#define CPR0_PERD 0xE0 +#define CPR0_PERD_PERDV0_MASK 0x07000000 +#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1) +/*--------------------------------------*/ +#define CPR0_MALD 0x100 +#define CPR0_MALD_MALDV0_MASK 0x03000000 +#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) +/*--------------------------------------*/ +#define CPR0_SPCID 0x120 +#define CPR0_SPCID_SPCIDV0_MASK 0x03000000 +#define CPR0_SPCID_SPCIDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define CPR0_SPCID_SPCIDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) +/*--------------------------------------*/ +#define CPR0_ICFG 0x140 +#define CPR0_ICFG_RLI_MASK 0x80000000 +#define CPR0_ICFG_RLI_RESETCPR 0x00000000 +#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000 +#define CPR0_ICFG_ICS_MASK 0x00000007 +#endif /* defined (CONFIG_440EPX) || defined (CONFIG_440GRX) */ + /*----------------------------------------------------------------------------- | IIC Register Offsets '----------------------------------------------------------------------------*/ @@ -2539,7 +3063,8 @@ #define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000) #define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000) -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* PCI Local Configuration Registers --------------------------------- */ @@ -2625,6 +3150,33 @@ #endif /* !defined(CONFIG_440EP) !defined(CONFIG_440GR) */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + +/* USB2.0 Device */ +#define USB2D0_BASE CFG_USB2D0_BASE + +#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000) + +#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000) /* Interrupt register for Endpoint 0 plus IN Endpoints 1 to 3 */ +#define USB2D0_POWER (USB2D0_BASE + 0x00000000) /* Power management register */ +#define USB2D0_FADDR (USB2D0_BASE + 0x00000000) /* Function address register */ +#define USB2D0_INTRINE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRIN */ +#define USB2D0_INTROUT (USB2D0_BASE + 0x00000000) /* Interrupt register for OUT Endpoints 1 to 3 */ +#define USB2D0_INTRUSBE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRUSB */ +#define USB2D0_INTRUSB (USB2D0_BASE + 0x00000000) /* Interrupt register for common USB interrupts */ +#define USB2D0_INTROUTE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for IntrOut */ +#define USB2D0_TSTMODE (USB2D0_BASE + 0x00000000) /* Enables the USB 2.0 test modes */ +#define USB2D0_INDEX (USB2D0_BASE + 0x00000000) /* Index register for selecting the Endpoint status/control registers */ +#define USB2D0_FRAME (USB2D0_BASE + 0x00000000) /* Frame number */ +#define USB2D0_INCSR0 (USB2D0_BASE + 0x00000000) /* Control Status register for Endpoint 0. (Index register set to select Endpoint 0) */ +#define USB2D0_INCSR (USB2D0_BASE + 0x00000000) /* Control Status register for IN Endpoint. (Index register set to select Endpoints 13) */ +#define USB2D0_INMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet size for IN Endpoint. (Index register set to select Endpoints 13) */ +#define USB2D0_OUTCSR (USB2D0_BASE + 0x00000000) /* Control Status register for OUT Endpoint. (Index register set to select Endpoints 13) */ +#define USB2D0_OUTMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet size for OUT Endpoint. (Index register set to select Endpoints 13) */ +#define USB2D0_OUTCOUNT0 (USB2D0_BASE + 0x00000000) /* Number of received bytes in Endpoint 0 FIFO. (Index register set to select Endpoint 0) */ +#define USB2D0_OUTCOUNT (USB2D0_BASE + 0x00000000) /* Number of bytes in OUT Endpoint FIFO. (Index register set to select Endpoints 13) */ +#endif + /****************************************************************************** * GPIO macro register defines ******************************************************************************/ @@ -2640,7 +3192,8 @@ #define GPIO0_IR (GPIO0_BASE+0x1C) #endif /* CONFIG_440GP */ -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000B00) #define GPIO1_BASE (CFG_PERIPHERAL_BASE+0x00000C00) diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h index ec2e3629bb..43c5ca451e 100644 --- a/include/ppc4xx_enet.h +++ b/include/ppc4xx_enet.h @@ -145,12 +145,14 @@ typedef struct emac_4xx_hw_st { #define EMAC_STACR_OC_MASK (0x00000000) #endif -#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define SDR0_PFC1_EM_1000 (0x00200000) #endif /*ZMII Bridge Register addresses */ -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00) #else #define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780) @@ -163,6 +165,7 @@ typedef struct emac_4xx_hw_st { #define ZMII_MDI0 0x80000000 /* ZMII FER Register Bit Definitions */ +#define ZMII_FER_DIS (0x0) #define ZMII_FER_MDI (0x8) #define ZMII_FER_SMII (0x4) #define ZMII_FER_RMII (0x2) @@ -197,7 +200,11 @@ typedef struct emac_4xx_hw_st { #define ZMII_SMIISR_V(__x) ((3 - __x) * 8) /* RGMII Register Addresses */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x1000) +#else #define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x0790) +#endif #define RGMII_FER (RGMII_BASE + 0x00) #define RGMII_SSR (RGMII_BASE + 0x04) @@ -216,7 +223,11 @@ typedef struct emac_4xx_hw_st { #define RGMII_SSR_SP_100MBPS (0x02) #define RGMII_SSR_SP_1000MBPS (0x04) +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define RGMII_SSR_V(__x) ((__x) * 8) +#else #define RGMII_SSR_V(__x) ((__x -2) * 8) +#endif /*---------------------------------------------------------------------------+ @@ -286,7 +297,8 @@ typedef struct emac_4xx_hw_st { /* Ethernet MAC Regsiter Addresses */ #if defined(CONFIG_440) -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00) #else #define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800) @@ -332,7 +344,9 @@ typedef struct emac_4xx_hw_st { #define EMAC_M0_WKE (0x04000000) /* on 440GX EMAC_MR1 has a different layout! */ -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* MODE Reg 1 */ #define EMAC_M1_FDE (0x80000000) #define EMAC_M1_ILE (0x40000000) diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index 72d690ef0f..3e47e82aba 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -312,7 +312,7 @@ label: \ lwz r3,GOT(transfer_to_handler); \ mtlr r3; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ - li r20,MSR_KERNEL; \ + li r20,(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \ rlwimi r20,r23,0,25,25; \ blrl ; \ .L_ ## label : \ diff --git a/lib_ppc/board.c b/lib_ppc/board.c index db80f77560..cf0e3fdf4b 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -763,6 +763,12 @@ void board_init_r (gd_t *id, ulong dest_addr) spi_init_r (); #endif +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + WATCHDOG_RESET (); + puts ("NAND: "); + nand_init(); /* go init the NAND */ +#endif + /* relocate environment function pointers etc. */ env_relocate (); @@ -959,12 +965,6 @@ void board_init_r (gd_t *id, ulong dest_addr) doc_init (); #endif -#if (CONFIG_COMMANDS & CFG_CMD_NAND) - WATCHDOG_RESET (); - puts ("NAND: "); - nand_init(); /* go init the NAND */ -#endif - #if (CONFIG_COMMANDS & CFG_CMD_NET) #if defined(CONFIG_NET_MULTI) WATCHDOG_RESET (); diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile new file mode 100644 index 0000000000..6c07e3dd8d --- /dev/null +++ b/nand_spl/board/amcc/sequoia/Makefile @@ -0,0 +1,83 @@ +# +# (C) Copyright 2006 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk +include board/$(BOARDDIR)/config.mk + +LDSCRIPT= board/$(BOARDDIR)/u-boot.lds +LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +AFLAGS += -DCONFIG_NAND_SPL +CFLAGS += -DCONFIG_NAND_SPL + +SOBJS = start.o init.o resetvec.o +COBJS = nand_boot.o ndfc.o sdram.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +ALL = u-boot-spl u-boot-spl.bin u-boot-spl-4k.bin + +all: $(obj).depend $(ALL) + +u-boot-spl-4k.bin: u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ + +u-boot-spl.bin: u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +u-boot-spl: $(OBJS) + $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \ + -Map u-boot-spl.map -o u-boot-spl + +# create symbolic links for common files + +# from cpu directory +ndfc.c: + @rm -f ndfc.c + ln -s ../cpu/ppc4xx/ndfc.c ndfc.c + +resetvec.S: + @rm -f resetvec.S + ln -s ../cpu/ppc4xx/resetvec.S resetvec.S + +start.S: + @rm -f start.S + ln -s ../cpu/ppc4xx/start.S start.S + +# from board directory +init.S: + @rm -f init.S + ln -s ../board/amcc/sequoia/init.S init.S + +sdram.c: + @rm -f sdram.c + ln -s ../board/amcc/sequoia/sdram.c sdram.c + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/nand_spl/board/amcc/sequoia/config.mk b/nand_spl/board/amcc/sequoia/config.mk new file mode 100644 index 0000000000..a29ba5fd0d --- /dev/null +++ b/nand_spl/board/amcc/sequoia/config.mk @@ -0,0 +1,49 @@ +# +# (C) Copyright 2006 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# AMCC 440EPx Reference Platform (Sequoia) board +# + +# +# TEXT_BASE for SPL: +# +# On 440EP(x) platforms the SPL is located at 0xfffff000...0xffffffff, +# in the last 4kBytes of memory space in cache. +# We will copy this SPL into internal SRAM in start.S. So we set +# TEXT_BASE to starting address in internal SRAM here. +# +TEXT_BASE = 0xE0013000 + +# PAD_TO used to generate a 16kByte binary needed for the combined image +# -> PAD_TO = TEXT_BASE + 0x4000 +PAD_TO = 0xE0017000 + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/nand_spl/board/amcc/sequoia/u-boot.lds b/nand_spl/board/amcc/sequoia/u-boot.lds new file mode 100644 index 0000000000..156368911a --- /dev/null +++ b/nand_spl/board/amcc/sequoia/u-boot.lds @@ -0,0 +1,65 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc:common) +SECTIONS +{ + .resetvec 0xE0013FFC : + { + *(.resetvec) + } = 0xffff + + .text : + { + start.o (.text) + init.o (.text) + nand_boot.o (.text) + sdram.o (.text) + ndfc.o (.text) + + *(.text) + *(.fixup) + } + _etext = .; + + .data : + { + *(.rodata*) + *(.data*) + *(.sdata*) + __got2_start = .; + *(.got2) + __got2_end = .; + } + + _edata = .; + + __bss_start = .; + .bss : + { + *(.sbss) + *(.bss) + } + + _end = . ; +} diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c new file mode 100644 index 0000000000..6e3af13939 --- /dev/null +++ b/nand_spl/nand_boot.c @@ -0,0 +1,178 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#define CFG_NAND_READ_DELAY \ + { volatile int dummy; int i; for (i=0; i<10000; i++) dummy = i; } + +extern void board_nand_init(struct nand_chip *nand); +extern void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd); +extern void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte); +extern u_char ndfc_read_byte(struct mtd_info *mtdinfo); +extern int ndfc_dev_ready(struct mtd_info *mtdinfo); +extern int jump_to_ram(ulong delta); +extern int jump_to_uboot(ulong addr); + +static int nand_is_bad_block(struct mtd_info *mtd, int block) +{ + struct nand_chip *this = mtd->priv; + int page_addr = block * CFG_NAND_PAGE_COUNT; + + /* Begin command latch cycle */ + this->hwcontrol(mtd, NAND_CTL_SETCLE); + this->write_byte(mtd, NAND_CMD_READOOB); + /* Set ALE and clear CLE to start address cycle */ + this->hwcontrol(mtd, NAND_CTL_CLRCLE); + this->hwcontrol(mtd, NAND_CTL_SETALE); + /* Column address */ + this->write_byte(mtd, CFG_NAND_BAD_BLOCK_POS); /* A[7:0] */ + this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */ + this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */ +#ifdef CFG_NAND_4_ADDR_CYCLE + /* One more address cycle for devices > 32MiB */ + this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:25] */ +#endif + /* Latch in address */ + this->hwcontrol(mtd, NAND_CTL_CLRALE); + + /* + * Wait a while for the data to be ready + */ + if (this->dev_ready) + this->dev_ready(mtd); + else + CFG_NAND_READ_DELAY; + + /* + * Read on byte + */ + if (this->read_byte(mtd) != 0xff) + return 1; + + return 0; +} + +static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst) +{ + struct nand_chip *this = mtd->priv; + int page_addr = page + block * CFG_NAND_PAGE_COUNT; + int i; + + /* Begin command latch cycle */ + this->hwcontrol(mtd, NAND_CTL_SETCLE); + this->write_byte(mtd, NAND_CMD_READ0); + /* Set ALE and clear CLE to start address cycle */ + this->hwcontrol(mtd, NAND_CTL_CLRCLE); + this->hwcontrol(mtd, NAND_CTL_SETALE); + /* Column address */ + this->write_byte(mtd, 0); /* A[7:0] */ + this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */ + this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */ +#ifdef CFG_NAND_4_ADDR_CYCLE + /* One more address cycle for devices > 32MiB */ + this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:25] */ +#endif + /* Latch in address */ + this->hwcontrol(mtd, NAND_CTL_CLRALE); + + /* + * Wait a while for the data to be ready + */ + if (this->dev_ready) + this->dev_ready(mtd); + else + CFG_NAND_READ_DELAY; + + /* + * Read page into buffer + */ + for (i=0; iread_byte(mtd); + + return 0; +} + +static int nand_load(struct mtd_info *mtd, int offs, int uboot_size, uchar *dst) +{ + int block; + int blockcopy_count; + int page; + + /* + * offs has to be aligned to a block address! + */ + block = offs / CFG_NAND_BLOCK_SIZE; + blockcopy_count = 0; + + while (blockcopy_count < (uboot_size / CFG_NAND_BLOCK_SIZE)) { + if (!nand_is_bad_block(mtd, block)) { + /* + * Skip bad blocks + */ + for (page = 0; page < CFG_NAND_PAGE_COUNT; page++) { + nand_read_page(mtd, block, page, dst); + dst += CFG_NAND_PAGE_SIZE; + } + + blockcopy_count++; + } + + block++; + } + + return 0; +} + +void nand_boot(void) +{ + ulong mem_size; + struct nand_chip nand_chip; + nand_info_t nand_info; + int ret; + void (*uboot)(void); + + /* + * Init sdram, so we have access to memory + */ + mem_size = initdram(0); + + /* + * Init board specific nand support + */ + nand_info.priv = &nand_chip; + nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void __iomem *)CFG_NAND_BASE; + nand_chip.dev_ready = NULL; /* preset to NULL */ + board_nand_init(&nand_chip); + + /* + * Load U-Boot image from NAND into RAM + */ + ret = nand_load(&nand_info, CFG_NAND_U_BOOT_OFFS, + CFG_NAND_U_BOOT_SIZE, + (uchar *)CFG_NAND_U_BOOT_DST); + + /* + * Jump to U-Boot image + */ + uboot = (void (*)(void))CFG_NAND_U_BOOT_START; + (*uboot)(); +} -- cgit v1.2.3 From 4f0645eb7909635a72421de57904ef6531bbd82a Mon Sep 17 00:00:00 2001 From: Marian Balakowicz Date: Thu, 7 Sep 2006 12:05:53 +0200 Subject: Fix LOG_DIR directory creation error. Add support for automatic creation of BUILD_DIR directory. --- CHANGELOG | 4 +++- MAKEALL | 2 +- Makefile | 5 +++++ 3 files changed, 9 insertions(+), 2 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 3c42d93fe8..672a61955b 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix LOG_DIR directory creation error. + Add support for automatic creation of BUILD_DIR directory. + * Fix mkimage -l bug with multifile images on 64bit platforms Patch by David Updegraff, 06 Sep 2006 @@ -30,7 +33,6 @@ Changes since U-Boot 1.1.4: * Fix tools/easylogo build error. - * Fixed problems on PRS200 board caused by adding splash screen on MCC200 * Extended README entry on coding style diff --git a/MAKEALL b/MAKEALL index d2f86d3ac8..112be32ab7 100755 --- a/MAKEALL +++ b/MAKEALL @@ -18,7 +18,7 @@ if [ ! "${BUILD_DIR}" ] ; then BUILD_DIR="." fi -[ -d ${MAKEALL_LOGDIR} ] || mkdir ${MAKEALL_LOGDIR} || exit 1 +[ -d ${LOG_DIR} ] || mkdir ${LOG_DIR} || exit 1 LIST="" diff --git a/Makefile b/Makefile index fc7b117e3f..a4aa19f0d6 100644 --- a/Makefile +++ b/Makefile @@ -74,6 +74,11 @@ endif ifneq ($(BUILD_DIR),) saved-output := $(BUILD_DIR) + +# Attempt to create a output directory. +$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) + +# Verify if it was successful. BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) endif # ifneq ($(BUILD_DIR),) -- cgit v1.2.3 From 5e09054af67d1bf89f59406933fb021390c7534b Mon Sep 17 00:00:00 2001 From: Marian Balakowicz Date: Thu, 7 Sep 2006 12:12:20 +0200 Subject: Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory. --- CHANGELOG | 2 + cpu/mpc824x/drivers/dma/Makefile | 83 ---- cpu/mpc824x/drivers/dma/Makefile_pc | 89 ---- cpu/mpc824x/drivers/dma/README | 100 ---- cpu/mpc824x/drivers/dma/dma.h | 326 ------------- cpu/mpc824x/drivers/dma/dma1.c | 801 ------------------------------- cpu/mpc824x/drivers/dma/dma2.S | 42 -- cpu/mpc824x/drivers/dma/dma_export.h | 100 ---- cpu/mpc824x/drivers/dma_export.h | 100 ---- cpu/mpc824x/drivers/i2o.h | 344 -------------- cpu/mpc824x/drivers/i2o/Makefile | 84 ---- cpu/mpc824x/drivers/i2o/Makefile_pc | 90 ---- cpu/mpc824x/drivers/i2o/i2o.h | 345 -------------- cpu/mpc824x/drivers/i2o/i2o1.c | 890 ----------------------------------- cpu/mpc824x/drivers/i2o/i2o2.S | 47 -- 15 files changed, 2 insertions(+), 3441 deletions(-) delete mode 100644 cpu/mpc824x/drivers/dma/Makefile delete mode 100644 cpu/mpc824x/drivers/dma/Makefile_pc delete mode 100644 cpu/mpc824x/drivers/dma/README delete mode 100644 cpu/mpc824x/drivers/dma/dma.h delete mode 100644 cpu/mpc824x/drivers/dma/dma1.c delete mode 100644 cpu/mpc824x/drivers/dma/dma2.S delete mode 100644 cpu/mpc824x/drivers/dma/dma_export.h delete mode 100644 cpu/mpc824x/drivers/dma_export.h delete mode 100644 cpu/mpc824x/drivers/i2o.h delete mode 100644 cpu/mpc824x/drivers/i2o/Makefile delete mode 100644 cpu/mpc824x/drivers/i2o/Makefile_pc delete mode 100644 cpu/mpc824x/drivers/i2o/i2o.h delete mode 100644 cpu/mpc824x/drivers/i2o/i2o1.c delete mode 100644 cpu/mpc824x/drivers/i2o/i2o2.S diff --git a/CHANGELOG b/CHANGELOG index 672a61955b..8582b9797b 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory. + * Fix LOG_DIR directory creation error. Add support for automatic creation of BUILD_DIR directory. diff --git a/cpu/mpc824x/drivers/dma/Makefile b/cpu/mpc824x/drivers/dma/Makefile deleted file mode 100644 index 59e2fac863..0000000000 --- a/cpu/mpc824x/drivers/dma/Makefile +++ /dev/null @@ -1,83 +0,0 @@ -########################################################################## -# -# Copyright Motorola, Inc. 1997 -# ALL RIGHTS RESERVED -# -# You are hereby granted a copyright license to use, modify, and -# distribute the SOFTWARE so long as this entire notice is retained -# without alteration in any modified and/or redistributed versions, -# and that such modified versions are clearly identified as such. -# No licenses are granted by implication, estoppel or otherwise under -# any patents or trademarks of Motorola, Inc. -# -# The SOFTWARE is provided on an "AS IS" basis and without warranty. -# To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS -# ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED -# WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR -# PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH -# REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS -# THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS. -# -# To the maximum extent permitted by applicable law, IN NO EVENT SHALL -# MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER -# (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF -# BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS -# INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR -# INABILITY TO USE THE SOFTWARE. -# -############################################################################ -TARGET = libdma.a - -DEBUG = -DDMADBG -LST = -Hanno -S -OPTIM = -CC = /risc/tools/pkgs/metaware/bin/hcppc -CFLAGS = -Hnocopyr -c -Hsds -Hon=Char_default_unsigned -Hon=Char_is_rep -I../inc -I/risc/tools/pkgs/metaware/inc -CCobj = $(CC) $(CFLAGS) $(DEBUG) $(OPTIM) -PREP = $(CC) $(CFLAGS) -P - -# Assembler used to build the .s files (for the board version) - -ASOPT = -big_si -c -ASDEBUG = -l -fm -AS = /risc/tools/pkgs/metaware/bin/asppc - -# Linker to bring .o files together into an executable. - -LKOPT = -Bbase=0 -q -r -Qn -LKCMD = -LINK = /risc/tools/pkgs/metaware/bin/ldppc $(LKCMD) $(LKOPT) - -# DOS Utilities - -DEL = rm -COPY = cp -LIST = ls - -OBJECTS = dma1.o dma2.o - -all: $(TARGET) - -$(TARGET): $(OBJECTS) - $(LINK) $(OBJECTS) -o $@ - -objects: dma1.o - -clean: - $(DEL) -f *.o *.i *.map *.lst $(TARGET) $(OBJECTS) - -.s.o: - $(DEL) -f $*.i - $(PREP) -Hasmcpp $< - $(AS) $(ASOPT) $*.i -# $(AS) $(ASOPT) $(ASDEBUG) $*.i > $*.lst - -.c.o: - $(CCobj) $< - -.c.s: - $(CCobj) $(LST) $< - -dma1.o: dma_export.h dma.h dma1.c - -dma2.o: dma.h dma2.s diff --git a/cpu/mpc824x/drivers/dma/Makefile_pc b/cpu/mpc824x/drivers/dma/Makefile_pc deleted file mode 100644 index 8df2a3cb79..0000000000 --- a/cpu/mpc824x/drivers/dma/Makefile_pc +++ /dev/null @@ -1,89 +0,0 @@ -########################################################################## -# -# makefile_pc for use with mksnt tools drivers/dma -# -# Copyright Motorola, Inc. 1997 -# ALL RIGHTS RESERVED -# -# You are hereby granted a copyright license to use, modify, and -# distribute the SOFTWARE so long as this entire notice is retained -# without alteration in any modified and/or redistributed versions, -# and that such modified versions are clearly identified as such. -# No licenses are granted by implication, estoppel or otherwise under -# any patents or trademarks of Motorola, Inc. -# -# The SOFTWARE is provided on an "AS IS" basis and without warranty. -# To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS -# ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED -# WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR -# PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH -# REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS -# THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS. -# -# To the maximum extent permitted by applicable law, IN NO EVENT SHALL -# MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER -# (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF -# BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS -# INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR -# INABILITY TO USE THE SOFTWARE. -# -############################################################################ -TARGET = libdma.a - -DEBUG = -DDMADBG -LST = -Hanno -S -OPTIM = -CC = m:/old_tools/tools/hcppc/bin/hcppc -CFLAGS = -Hnocopyr -c -Hsds -Hon=Char_default_unsigned -Hon=Char_is_rep -I../inc -I/risc/tools/pkgs/metaware/inc -CCobj = $(CC) $(CFLAGS) $(DEBUG) $(OPTIM) -PREP = $(CC) $(CFLAGS) -P - -# Assembler used to build the .s files (for the board version) - -ASOPT = -big_si -c -ASDEBUG = -l -fm -AS = m:/old_tools/tools/hcppc/bin/asppc - -# Linker to bring .o files together into an executable. - -LKOPT = -Bbase=0 -q -r -Qn -LKCMD = -LINK = m:/old_tools/tools/hcppc/bin/ldppc $(LKCMD) $(LKOPT) - -# DOS Utilities - -DEL = rm -COPY = cp -LIST = ls - -OBJECTS = dma1.o dma2.o - -all: $(TARGET) - -$(TARGET): $(OBJECTS) - $(LINK) $(OBJECTS) -o $@ - -objects: dma1.o - -clean: - $(DEL) -f *.o *.i *.map *.lst $(TARGET) $(OBJECTS) - -.s.o: - $(DEL) -f $*.i - $(PREP) -Hasmcpp $< - $(AS) $(ASOPT) $*.i -# $(AS) $(ASOPT) $(ASDEBUG) $*.i > $*.lst - -.c.o: - $(CCobj) $< - -.c.s: - $(CCobj) $(LST) $< - -dma1.o: dma_export.h dma.h dma1.c - $(CCobj) $< - -dma2.o: dma.h dma2.s - $(DEL) -f $*.i - $(PREP) -Hasmcpp $< - $(AS) $(ASOPT) $*.i diff --git a/cpu/mpc824x/drivers/dma/README b/cpu/mpc824x/drivers/dma/README deleted file mode 100644 index 06f4bc08d8..0000000000 --- a/cpu/mpc824x/drivers/dma/README +++ /dev/null @@ -1,100 +0,0 @@ -CONTENT: - - dma.h - dma1.c - dma2.s - -WHAT ARE THESE FILES: - -These files contain MPC8240 (Kahlua) DMA controller -driver routines. The driver routines are not -written for any specific operating system. -They serves the purpose of code sample, and -jump-start for using the MPC8240 DMA controller. - -For the reason of correctness of C language -syntax, these files are compiled by Metaware -C compiler and assembler. - -ENDIAN NOTATION: - -The algorithm is designed for big-endian mode, -software is responsible for byte swapping. - -USAGE: - -1. The host system that is running on MPC8240 - or using MPC8240 as I/O device shall link - the files listed here. The memory location - of driver routines shall take into account of - that driver routines need to run in supervisor - mode and they process DMA controller interrupt. - -2. The host system is responsible for configuring - the MPC8240 including Embedded Utilities Memory - Block. Since the DMA controller on MPC8240 can - be accessed by either local 603e core or the host - that MPC8240 serves as I/O processor through host - PCI configuration, it is important that the local - processor uses EUMBBAR to access its local DMA - controller while the PCI master uses I/O - processor's PCSRBAR to access the DMA controller - on I/O device. - - To qualify whether is EUMBBAR or PCSRBAR, one - additional parameter is requied from the host - system, LOCAL or REMOTE so that the base value - can be correctly interpreted. - -3. If the host system is also using the EPIC unit - on MPC8240, the system can register the - DMA_ISR with the EPIC including other - desired resources. - - If the host system does not using the EPIC unit - on MPC8240, DMA_ISR function can be called for - each desired time interval. - - In both cases, the host system is free to - provide its own interrupt service routine. - -4. To start a direct mode DMA transaction, - use DMA_Bld_Curr with the start parameter - set to 1. - - To start a chaining mode DMA transaction, - the application shall build descriptors - in memory first, next, use DMA_Bld_Desp - with the start parameter set to 1. - -5. DMA_Start function clears, then sets the CS - bit of DMA mode register. - - DMA_Halt function clears the CS bit of DMA - mode register. - - These functions can be used to start and - halt the DMA transaction. - - If the chaining descriptors has been - modified since the last time a DMA - transaction started, use DMA_Chn_Cnt - function to let DMA controller process - the modified descriptor chain without - stopping or disturbing the current DMA - transaction. - - It is the host system's responsibility of - setting up the correct DMA transfer mode - and pass the correct memory address parameters. - -6. It is the host system's responsibility of - queueing the DMA I/O request. The host - system can call the DMA_ISR with its own - desired interrupt service subroutines to - handle each individual interrupt and queued - DMA I/O requests. - -7. The DMA driver routines contains a set - of utilities, Set and Get, for host system - to query and modify the desired DMA registers. diff --git a/cpu/mpc824x/drivers/dma/dma.h b/cpu/mpc824x/drivers/dma/dma.h deleted file mode 100644 index a21be74ad1..0000000000 --- a/cpu/mpc824x/drivers/dma/dma.h +++ /dev/null @@ -1,326 +0,0 @@ -#ifndef DMA_H -#define DMA_H -/******************************************************* - * - * copyright @ Motorola 1999 - * - *******************************************************/ -#define NUM_DMA_REG 7 -#define DMA_MR_REG 0 -#define DMA_SR_REG 1 -#define DMA_CDAR_REG 2 -#define DMA_SAR_REG 3 -#define DMA_DAR_REG 4 -#define DMA_BCR_REG 5 -#define DMA_NDAR_REG 6 - -typedef enum _dmastatus -{ - DMASUCCESS = 0x1000, - DMALMERROR, - DMAPERROR, - DMACHNBUSY, - DMAEOSINT, - DMAEOCAINT, - DMAINVALID, - DMANOEVENT, -} DMAStatus; - -typedef enum _location -{ - LOCAL = 0, /* local processor accesses on board DMA, - local processor's eumbbar is required */ - REMOTE = 1, /* PCI master accesses DMA on I/O board, - I/O processor's pcsrbar is required */ -} LOCATION; - -typedef enum dma_mr_bit -{ - IRQS = 0x00080000, - PDE = 0x00040000, - DAHTS = 0x00030000, - SAHTS = 0x0000c000, - DAHE = 0x00002000, - SAHE = 0x00001000, - PRC = 0x00000c00, - EIE = 0x00000080, - EOTIE = 0x00000040, - DL = 0x00000008, - CTM = 0x00000004, - CC = 0x00000002, - CS = 0x00000001, -} DMA_MR_BIT; - -typedef enum dma_sr_bit -{ - LME = 0x00000080, - PE = 0x00000010, - CB = 0x00000004, - EOSI = 0x00000002, - EOCAI = 0x00000001, -} DMA_SR_BIT; - -/* structure for DMA Mode Register */ -typedef struct _dma_mr -{ - unsigned int reserved0 : 12; - unsigned int irqs : 1; - unsigned int pde : 1; - unsigned int dahts : 2; - unsigned int sahts : 2; - unsigned int dahe : 1; - unsigned int sahe : 1; - unsigned int prc : 2; - unsigned int reserved1 : 1; - unsigned int eie : 1; - unsigned int eotie : 1; - unsigned int reserved2 : 3; - unsigned int dl : 1; - unsigned int ctm : 1; - /* if chaining mode is enabled, any time, user can modify the - * descriptor and does not need to halt the current DMA transaction. - * Set CC bit, enable DMA to process the modified descriptors - * Hardware will clear this bit each time, DMA starts. - */ - unsigned int cc : 1; - /* cs bit has dua role, halt the current DMA transaction and - * (re)start DMA transaction. In chaining mode, if the descriptor - * needs modification, cs bit shall be used not the cc bit. - * Hardware will not set/clear this bit each time DMA transaction - * stops or starts. Software shall do it. - * - * cs bit shall not be used to halt chaining DMA transaction for - * modifying the descriptor. That is the role of CC bit. - */ - unsigned int cs : 1; -} DMA_MR; - -/* structure for DMA Status register */ -typedef struct _dma_sr -{ - unsigned int reserved0 : 24; - unsigned int lme : 1; - unsigned int reserved1 : 2; - unsigned int pe : 1; - unsigned int reserved2 : 1; - unsigned int cb : 1; - unsigned int eosi : 1; - unsigned int eocai : 1; -} DMA_SR; - -/* structure for DMA current descriptor address register */ -typedef struct _dma_cdar -{ - unsigned int cda : 27; - unsigned int snen : 1; - unsigned int eosie : 1; - unsigned int ctt : 2; - unsigned int eotd : 1; -} DMA_CDAR; - -/* structure for DMA byte count register */ -typedef struct _dma_bcr -{ - unsigned int reserved : 6; - unsigned int bcr : 26; -} DMA_BCR; - -/* structure for DMA Next Descriptor Address register */ -typedef struct _dma_ndar -{ - unsigned int nda : 27; - unsigned int ndsnen : 1; - unsigned int ndeosie: 1; - unsigned int ndctt : 2; - unsigned int eotd : 1; -} DMA_NDAR; - -/* structure for DMA current transaction info */ -typedef struct _dma_curr -{ - unsigned int src_addr; - unsigned int dest_addr; - unsigned int byte_cnt; -} DMA_CURR; - -/************************* Kernel API******************** - * Kernel APIs are used to interface with O.S. kernel. - * They are the functions required by O.S. kernel to - * provide I/O service. - ********************************************************/ - -/**************DMA Device Control Functions ********/ - -/** - * Note: - * - * In all following functions, the host (KAHLUA) processor has a - * choice of accessing on board local DMA (LOCAL), - * or DMA on a distributed KAHLUA (REMOTE). In either case, - * the caller shall pass the configured embedded utility memory - * block base address relative to the DMA. If LOCAL DMA is used, - * this parameter shall be EUMBBAR, if REMOTE is used, the - * parameter shall be the corresponding PCSRBAR. - **/ - -/************************************************************** - * function: DMA_Get_Stat - * - * description: return the content of status register of - * the given DMA channel - * if error, return DMAINVALID. Otherwise return - * DMASUCCESS. - * - **************************************************************/ -static DMAStatus DMA_Get_Stat( LOCATION, unsigned int eumbbar, unsigned int channel, DMA_SR * ); - -/************************************************************** - * function: DMA_Get_Mode - * - * description: return the content of mode register of the - * given DMA channel - * if error, return DMAINVALID. Otherwise return DMASUCCESS. - * - **************************************************************/ -static DMAStatus DMA_Get_Mode( LOCATION, unsigned int eumbbar, unsigned int channel, DMA_MR * ); - -/************************************************************** - * function: DMA_Set_Mode - * - * description: Set a new mode to a given DMA channel - * return DMASUCCESS if success, otherwise return DMACHNINVALID - * - * note: It is not a good idea of changing the DMA mode during - * the middle of a transaction. - **************************************************************/ -static DMAStatus DMA_Set_Mode( LOCATION, unsigned int eumbbar, unsigned int channel, DMA_MR mode ); - -/************************************************************* - * function: DMA_ISR - * - * description: DMA interrupt service routine - * return DMAStatus based on the status - * - *************************************************************/ -static DMAStatus DMA_ISR( unsigned int eumbbar, - unsigned int channel, - DMAStatus (*lme_func)( unsigned int, unsigned int, DMAStatus ), - DMAStatus (*pe_func) ( unsigned int, unsigned int, DMAStatus ), - DMAStatus (*eosi_func)( unsigned int, unsigned int, DMAStatus ), - DMAStatus (*eocai_func)(unsigned int, unsigned int, DMAStatus )); - -static DMAStatus dma_error_func( unsigned int, unsigned int, DMAStatus ); - -/********************* DMA I/O function ********************/ - -/************************************************************ - * function: DMA_Start - * - * description: start a given DMA channel transaction - * return DMASUCCESS if success, otherwise return DMACHNINVALID - * - * note: this function will clear DMA_MR(CC) first, then - * set DMA_MR(CC). - ***********************************************************/ -static DMAStatus DMA_Start( LOCATION, unsigned int eumbbar,unsigned int channel ); - -/*********************************************************** - * function: DMA_Halt - * - * description: halt the current dma transaction on the specified - * channel. - * return DMASUCCESS if success, otherwise return DMACHNINVALID - * - * note: if the specified DMA channel is idle, nothing happens - *************************************************************/ -static DMAStatus DMA_Halt( LOCATION, unsigned int eumbbar,unsigned int channel ); - -/************************************************************* - * function: DMA_Chn_Cnt - * - * description: set the DMA_MR(CC) bit for a given channel - * that is in chaining mode. - * return DMASUCCESS if successfule, otherwise return DMACHNINVALID - * - * note: if the given channel is not in chaining mode, nothing - * happen. - * - *************************************************************/ -static DMAStatus DMA_Chn_Cnt( LOCATION, unsigned int eumbbar,unsigned int channel ); - -/*********************** App. API *************************** - * App. API are the APIs Kernel provides for the application - * level program - ************************************************************/ -/************************************************************** - * function: DMA_Bld_Curr - * - * description: set current src, dest, byte count registers - * according to the desp for a given channel - * - * if the given channel is busy, no change made, - * return DMACHNBUSY. - * - * otherwise return DMASUCCESS. - * - * note: - **************************************************************/ -static DMAStatus DMA_Bld_Curr( LOCATION, - unsigned int eumbbar, - unsigned int channel, - DMA_CURR desp ); - -/************************************************************** - * function: DMA_Poke_Curr - * - * description: poke the current src, dest, byte count registers - * for a given channel. - * - * return DMASUCCESS if no error otherwise return DMACHNERROR - * - * note: Due to the undeterministic parallelism, in chaining - * mode, the value returned by this function shall - * be taken as reference when the query is made rather - * than the absolute snapshot when the value is returned. - **************************************************************/ -static DMAStatus DMA_Poke_Curr( LOCATION, - unsigned int eumbbar, - unsigned int channel, - DMA_CURR* desp ); - -/************************************************************** - * function: DMA_Bld_Desp - * - * description: set current descriptor address register - * according to the desp for a given channel - * - * if the given channel is busy return DMACHNBUSY - * and no change made, otherwise return DMASUCCESS. - * - * note: - **************************************************************/ -static DMAStatus DMA_Bld_Desp( LOCATION host, - unsigned int eumbbar, - unsigned int channel, - DMA_CDAR desp ); - -/************************************************************** - * function: DMA_Poke_Desp - * - * description: poke the current descriptor address register - * for a given channel - * - * return DMASUCCESS if no error otherwise return - * DMAINVALID - * - * note: Due to the undeterministic parallellism of DMA operation, - * the value returned by this function shall be taken as - * the most recently used descriptor when the last time - * DMA starts a chaining mode operation. - **************************************************************/ -static DMAStatus DMA_Poke_Desp( LOCATION, - unsigned int eumbbar, - unsigned int channel, - DMA_CDAR *desp ); - -#endif diff --git a/cpu/mpc824x/drivers/dma/dma1.c b/cpu/mpc824x/drivers/dma/dma1.c deleted file mode 100644 index 9c852670ec..0000000000 --- a/cpu/mpc824x/drivers/dma/dma1.c +++ /dev/null @@ -1,801 +0,0 @@ -/************************************************************ - * - * copyright @ Motorola, 1999 - * - * App. API - * - * App. API are the APIs Kernel provides for the application - * level program - * - ************************************************************/ -#include "dma_export.h" -#include "dma.h" - -/* Define a macro to use an optional application-layer print function, if - * one was passed to the library during initialization. If there was no - * function pointer passed, this protects against referencing a NULL pointer. - * Also define The global variable that holds the passed pointer. - */ -#define PRINT if ( app_print ) app_print -static int (*app_print)(char *,...); - -/* Set by call to get_eumbbar during DMA_Initialize. - * This could be globally available to the library, but there is - * an advantage to passing it as a parameter: it is already in a register - * and doesn't have to be loaded from memory. Also, that is the way the - * library was already implemented and I don't want to change it without - * a more detailed analysis. - * It is being set as a global variable during initialization to hide it from - * the DINK application layer, because it is Kahlua-specific. I think that - * get_eumbbar, load_runtime_reg, and store_runtime_reg should be defined in - * a Kahlua-specific library dealing with the embedded utilities memory block. - * Right now, get_eumbbar is defined in dink32/kahlua.s. The other two are - * defined in dink32/drivers/i2c/i2c2.s, drivers/dma/dma2.s, etc. - */ -static unsigned int Global_eumbbar = 0; -extern unsigned int get_eumbbar(); - - -extern unsigned int load_runtime_reg( unsigned int eumbbar, unsigned int reg ); -#pragma Alias( load_runtime_reg, "load_runtime_reg" ); - -extern void store_runtime_reg( unsigned int eumbbar, unsigned int reg, unsigned int val ); -#pragma Alias( store_runtime_reg, "store_runtime_reg" ); - -unsigned int dma_reg_tb[][14] = { - /* local DMA registers */ - { - /* DMA_0_MR */ 0x00001100, - /* DMA_0_SR */ 0x00001104, - /* DMA_0_CDAR */ 0x00001108, - /* DMA_0_SAR */ 0x00001110, - /* DMA_0_DAR */ 0x00001118, - /* DMA_0_BCR */ 0x00001120, - /* DMA_0_NDAR */ 0x00001124, - /* DMA_1_MR */ 0x00001200, - /* DMA_1_SR */ 0x00001204, - /* DMA_1_CDAR */ 0x00001208, - /* DMA_1_SAR */ 0x00001210, - /* DMA_1_DAR */ 0x00001218, - /* DMA_1_BCR */ 0x00001220, - /* DMA_1_NDAR */ 0x00001224, - }, - /* remote DMA registers */ - { - /* DMA_0_MR */ 0x00000100, - /* DMA_0_SR */ 0x00000104, - /* DMA_0_CDAR */ 0x00000108, - /* DMA_0_SAR */ 0x00000110, - /* DMA_0_DAR */ 0x00000118, - /* DMA_0_BCR */ 0x00000120, - /* DMA_0_NDAR */ 0x00000124, - /* DMA_1_MR */ 0x00000200, - /* DMA_1_SR */ 0x00000204, - /* DMA_1_CDAR */ 0x00000208, - /* DMA_1_SAR */ 0x00000210, - /* DMA_1_DAR */ 0x00000218, - /* DMA_1_BCR */ 0x00000220, - /* DMA_1_NDAR */ 0x00000224, - }, -}; - -/* API functions */ - -/* Initialize DMA unit with the following: - * optional pointer to application layer print function - * - * These parameters may be added: - * ??? - * Interrupt enables, modes, etc. are set for each transfer. - * - * This function must be called before DMA unit can be used. - */ -extern -DMA_Status DMA_Initialize( int (*p)(char *,...)) -{ - DMAStatus status; - /* establish the pointer, if there is one, to the application's "printf" */ - app_print = p; - - /* If this is the first call, get the embedded utilities memory block - * base address. I'm not sure what to do about error handling here: - * if a non-zero value is returned, accept it. - */ - if ( Global_eumbbar == 0) - Global_eumbbar = get_eumbbar(); - if ( Global_eumbbar == 0) - { - PRINT( "DMA_Initialize: can't find EUMBBAR\n" ); - return DMA_ERROR; - } - - return DMA_SUCCESS; -} - - -/* Perform the DMA transfer, only direct mode is currently implemented. - * At this point, I think it would be better to define a different - * function for chaining mode. - * Also, I'm not sure if it is appropriate to have the "generic" API - * accept snoop and int_steer parameters. The DINK user interface allows - * them, so for now I'll leave them. - * - * int_steer controls DMA interrupt steering to PCI or local processor - * type is the type of transfer: M2M, M2P, P2M, P2P - * source is the source address of the data - * dest is the destination address of the data - * len is the length of data to transfer - * channel is the DMA channel to use for the transfer - * snoop is the snoop enable control - */ -extern DMA_Status DMA_direct_transfer( DMA_INTERRUPT_STEER int_steer, - DMA_TRANSFER_TYPE type, - unsigned int source, - unsigned int dest, - unsigned int len, - DMA_CHANNEL channel, - DMA_SNOOP_MODE snoop) -{ - DMA_MR md; - DMA_CDAR cdar; - /* it's inappropriate for curr to be a struct, but I'll leave it */ - DMA_CURR curr; - - DMAStatus stat; - - /* The rest of this code was moved from device.c test_dma to here. - * It needs to be cleaned up and validated, but at least it is removed - * from the application and API. Most of the mode is left hard coded. - * This should be changed after the final API is defined and the user - * application has a way to control the transfer. - * - */ - - if ( DMA_Get_Mode( LOCAL, Global_eumbbar, channel, &md ) != DMASUCCESS ) - { - return DMA_ERROR; - } - - md.irqs = int_steer; - md.pde = 0; - md.dahts = 3; /* 8 - byte */ - md.sahts = 3; /* 8 - byte */ - md.dahe = 0; - md.sahe = 0; - md.prc = 0; - /* if steering interrupts to local processor, use polling mode */ - if ( int_steer == DMA_INT_STEER_PCI ) - { - md.eie = 1; - md.eotie = 1; - } else { - md.eie = 0; - md.eotie = 0; - } - md.dl = 0; - md.ctm = 1; /* direct mode */ - md.cc = 0; - - /* validate the length range */ - if (len > 0x3ffffff ) - { - PRINT( "dev DMA: length of transfer too large: %d\n", len ); - return DMA_ERROR; - } - - /* inappropriate to use a struct, but leave as is for now */ - curr.src_addr = source; - curr.dest_addr = dest; - curr.byte_cnt = len; - - (void)DMA_Poke_Desp( LOCAL, Global_eumbbar, channel, &cdar ); - cdar.snen = snoop; - cdar.ctt = type; - - if ( ( stat = DMA_Bld_Desp( LOCAL, Global_eumbbar, channel, cdar )) - != DMASUCCESS || - ( stat = DMA_Bld_Curr( LOCAL, Global_eumbbar, channel, curr )) - != DMASUCCESS || - ( stat = DMA_Set_Mode( LOCAL, Global_eumbbar, channel, md )) - != DMASUCCESS || - ( stat = DMA_Start( LOCAL, Global_eumbbar, channel )) - != DMASUCCESS ) - { - if ( stat == DMACHNBUSY ) - { - PRINT( "dev DMA: channel %d busy.\n", channel ); - } - else - { - PRINT( "dev DMA: invalid channel request.\n", channel ); - } - - return DMA_ERROR; - } - -/* Since we are interested at the DMA performace right now, - we are going to do as less as possible to burden the - 603e core. - - if you have epic enabled or don't care the return from - DMA operation, you can just return SUCCESS. - - if you don't have epic enabled and care the DMA result, - you can use the polling method below. - - Note: I'll attempt to activate the code for handling polling. - */ - -#if 0 - /* if steering interrupt to local processor, let it handle results */ - if ( int_steer == DMA_INT_STEER_LOCAL ) - { - return DMA_SUCCESS; - } - - /* polling since interrupt goes to PCI */ - do - { - stat = DMA_ISR( Global_eumbbar, channel, dma_error_func, - dma_error_func, dma_error_func, dma_error_func ); - } - while ( stat == DMANOEVENT ); -#endif - - return DMA_SUCCESS; -} - -/* DMA library internal functions */ - -/** - * Note: - * - * In all following functions, the host (KAHLUA) processor has a - * choice of accessing on board local DMA (LOCAL), - * or DMA on a distributed KAHLUA (REMOTE). In either case, - * the caller shall pass the configured embedded utility memory - * block base address relative to the DMA. If LOCAL DMA is used, - * this parameter shall be EUMBBAR, if REMOTE is used, the - * parameter shall be the corresponding PCSRBAR. - **/ - -/************************************************************** - * function: DMA_Get_Stat - * - * description: return the content of status register of - * the given DMA channel - * - * if error, reserved0 field all 1s. - **************************************************************/ -static -DMAStatus DMA_Get_Stat( LOCATION host, unsigned int eumbbar, unsigned int channel, DMA_SR *stat ) -{ - unsigned int tmp; - - if ( channel != 0 && channel != 1 || stat == 0 ) - { - return DMAINVALID; - } - - tmp = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_SR_REG] ); -#ifdef DMADBG0 - PRINT( "%s(%d): %s DMA %d (0x%08x) stat = 0x%08x\n", __FILE__, __LINE__, - ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_SR_REG], tmp ); -#endif - - stat->reserved0 = ( tmp & 0xffffff00 ) >> 8; - stat->lme = ( tmp & 0x00000080 ) >> 7; - stat->reserved1 = ( tmp & 0x00000060 ) >> 5; - stat->pe = ( tmp & 0x00000010 ) >> 4; - stat->reserved2 = ( tmp & 0x00000008 ) >> 3; - stat->cb = ( tmp & 0x00000004 ) >> 2; - stat->eosi = ( tmp & 0x00000002 ) >> 1; - stat->eocai = ( tmp & 0x00000001 ); - - return DMASUCCESS; -} - -/************************************************************** - * function: DMA_Get_Mode - * - * description: return the content of mode register of the - * given DMA channel - * - * if error, return DMAINVALID, otherwise return - * DMASUCCESS - **************************************************************/ -static -DMAStatus DMA_Get_Mode( LOCATION host, unsigned eumbbar, unsigned int channel, DMA_MR *mode ) -{ - unsigned int tmp; - if ( channel != 0 && channel != 1 || mode == 0 ) - { - return DMAINVALID; - } - - tmp = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_MR_REG] ); - -#ifdef DMADBG0 - PRINT( "%s(%d): %s DMA %d (0x%08x) mode = 0x%08x\n", __FILE__, __LINE__, - ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_MR_REG], tmp ); -#endif - - mode->reserved0 = (tmp & 0xfff00000) >> 20; - mode->irqs = (tmp & 0x00080000) >> 19; - mode->pde = (tmp & 0x00040000) >> 18; - mode->dahts = (tmp & 0x00030000) >> 16; - mode->sahts = (tmp & 0x0000c000) >> 14; - mode->dahe = (tmp & 0x00002000) >> 13; - mode->sahe = (tmp & 0x00001000) >> 12; - mode->prc = (tmp & 0x00000c00) >> 10; - mode->reserved1 = (tmp & 0x00000200) >> 9; - mode->eie = (tmp & 0x00000100) >> 8; - mode->eotie = (tmp & 0x00000080) >> 7; - mode->reserved2 = (tmp & 0x00000070) >> 4; - mode->dl = (tmp & 0x00000008) >> 3; - mode->ctm = (tmp & 0x00000004) >> 2; - mode->cc = (tmp & 0x00000002) >> 1; - mode->cs = (tmp & 0x00000001); - - return DMASUCCESS; -} - -/************************************************************** - * function: DMA_Set_Mode - * - * description: Set a new mode to a given DMA channel - * - * note: It is not a good idea of changing the DMA mode during - * the middle of a transaction. - **************************************************************/ -static -DMAStatus DMA_Set_Mode( LOCATION host, unsigned eumbbar, unsigned int channel, DMA_MR mode ) -{ - unsigned int tmp; - if ( channel != 0 && channel != 1 ) - { - return DMAINVALID; - } - - tmp = ( mode.reserved0 & 0xfff ) << 20; - tmp |= ( ( mode.irqs & 0x1 ) << 19); - tmp |= ( ( mode.pde & 0x1 ) << 18 ); - tmp |= ( ( mode.dahts & 0x3 ) << 16 ); - tmp |= ( ( mode.sahts & 0x3 ) << 14 ); - tmp |= ( ( mode.dahe & 0x1 ) << 13 ); - tmp |= ( ( mode.sahe & 0x1 ) << 12 ); - tmp |= ( ( mode.prc & 0x3 ) << 10 ); - tmp |= ( ( mode.reserved1 & 0x1 ) << 9 ); - tmp |= ( ( mode.eie & 0x1 ) << 8 ); - tmp |= ( ( mode.eotie & 0x1 ) << 7 ); - tmp |= ( ( mode.reserved2 & 0x7 ) << 4 ); - tmp |= ( ( mode.dl & 0x1 ) << 3 ); - tmp |= ( ( mode.ctm & 0x1 ) << 2 ); - tmp |= ( ( mode.cc & 0x1 ) << 1 ) ; - tmp |= ( mode.cs & 0x1 ); - - store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG], tmp ); - return DMASUCCESS; -} - -/************************************************************ - * function: DMA_Start - * - * description: start a given DMA channel transaction - * return DMASUCCESS if success otherwise return - * DMAStatus value - * - * note: this function will clear DMA_MR(CC) first, then - * set DMA_MR(CC). - ***********************************************************/ -static -DMAStatus DMA_Start( LOCATION host, unsigned int eumbbar, unsigned int channel ) -{ - DMA_SR stat; - unsigned int mode; - - if ( channel != 0 && channel != 1 ) - { - return DMAINVALID; - } - - if ( DMA_Get_Stat( host, eumbbar, channel, &stat ) != DMASUCCESS ) - { - return DMAINVALID; - } - - if ( stat.cb == 1 ) - { - /* DMA is not free */ - return DMACHNBUSY; - } - - mode = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG] ); - /* clear DMA_MR(CS) */ - mode &= 0xfffffffe; - store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG], mode ); - - /* set DMA_MR(CS) */ - mode |= CS; - store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG], mode ); - return DMASUCCESS; -} - -/*********************************************************** - * function: DMA_Halt - * - * description: halt the current dma transaction on the specified - * channel. - * return DMASUCCESS if success otherwise return DMAINVALID - * - * note: if the specified DMA channel is idle, nothing happens - *************************************************************/ -static -DMAStatus DMA_Halt( LOCATION host, unsigned int eumbbar, unsigned int channel ) -{ - unsigned int mode; - if ( channel != 0 && channel != 1 ) - { - return DMAINVALID; - } - - mode = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG]); - - /* clear DMA_MR(CS) */ - mode &= 0xfffffffe; - store_runtime_reg(eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG], mode ); - return DMASUCCESS; -} - -/************************************************************* - * function: DMA_Chn_Cnt - * - * description: set the DMA_MR(CC) bit for a given channel - * that is in chaining mode. - * return DMASUCCESS if successfule, otherwise return - * DMAINVALID. - * - * note: if the given channel is not in chaining mode, nothing - * happen. - * - *************************************************************/ -static -DMAStatus DMA_Chn_Cnt( LOCATION host, unsigned int eumbbar, unsigned int channel ) -{ - DMA_MR mode; - if ( channel != 0 && channel != 1 ) - { - return DMAINVALID; - } - - if ( DMA_Get_Mode( host, eumbbar, channel, &mode ) != DMASUCCESS ) - { - return DMAINVALID; - } - - if ( mode.ctm == 0 ) - { - /* either illegal mode or not chaining mode */ - return DMAINVALID; - } - - mode.cc = 1; - return DMA_Set_Mode( host, eumbbar, channel, mode ); -} - -/************************************************************** - * function: DMA_Bld_Desp - * - * description: set current descriptor address register - * according to the desp for a given channel - * - * if the given channel is busy return DMACHNBUSY - * and no change made, otherwise return DMASUCCESS. - * - * note: - **************************************************************/ -static -DMAStatus DMA_Bld_Desp( LOCATION host, - unsigned int eumbbar, - unsigned int channel, - DMA_CDAR desp ) -{ - DMA_SR status; - unsigned int temp; - - if ( channel != 0 && channel != 1 ) - { - /* channel number out of range */ - return DMAINVALID; - } - - if ( DMA_Get_Stat( host, eumbbar, channel, &status ) != DMASUCCESS ) - { - return DMAINVALID; - } - - if ( status.cb == 1 ) - { - /* channel busy */ - return DMACHNBUSY; - } - - temp = ( desp.cda & 0x7ffffff ) << 5; - temp |= (( desp.snen & 0x1 ) << 4 ); - temp |= (( desp.eosie & 0x1 ) << 3 ); - temp |= (( desp.ctt & 0x3 ) << 1 ); - temp |= ( desp.eotd & 0x1 ); - - store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], temp ); - -#ifdef DMADBG0 - PRINT( "%s(%d): %s DMA %d (0x%08x) cdar := 0x%08x\n", __FILE__, __LINE__, - ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], temp ); -#endif - - return DMASUCCESS; -} - -/************************************************************** - * function: DMA_Poke_Desp - * - * description: poke the current descriptor address register - * for a given channel - * - * return DMASUCCESS if no error - * - * note: Due to the undeterministic parallellism of DMA operation, - * the value returned by this function shall be taken as - * the most recently used descriptor when the last time - * DMA starts a chaining mode operation. - **************************************************************/ -static -DMAStatus DMA_Poke_Desp( LOCATION host, - unsigned int eumbbar, - unsigned int channel, - DMA_CDAR *desp ) -{ - unsigned int cdar; - if ( channel != 0 && channel != 1 || desp == 0 ) - { - return DMAINVALID; - } - - cdar = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG] ); - -#ifdef DMADBG0 - PRINT( "%s(%d): %s DMA %d (0x%08x) cdar : 0x%08x\n", __FILE__, __LINE__, - ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], cdar ); -#endif - - - desp->cda = ( cdar & 0xffffffe0 ) >> 5; - desp->snen = ( cdar & 0x00000010 ) >> 4; - desp->eosie = ( cdar & 0x00000008 ) >> 3; - desp->ctt = ( cdar & 0x00000006 ) >> 1; - desp->eotd = ( cdar & 0x00000001 ); - - return DMASUCCESS; -} - -/************************************************************** - * function: DMA_Bld_Curr - * - * description: set current src, dest, byte count registers - * according to the desp for a given channel - * return DMASUCCESS if no error. - * - * note: - **************************************************************/ -static -DMAStatus DMA_Bld_Curr( LOCATION host, - unsigned int eumbbar, - unsigned int channel, - DMA_CURR desp ) -{ - DMA_SR status; - if ( channel != 0 && channel != 1 ) - { - /* channel number out of range */ - return DMAINVALID; - } - - if ( DMA_Get_Stat( host, eumbbar, channel, &status ) != DMASUCCESS ) - { - return DMAINVALID; - } - - if ( status.cb == 1 ) - { - /* channel busy */ - return DMACHNBUSY; - } - - desp.byte_cnt &= 0x03ffffff; /* upper 6-bits are 0s */ - - store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_SAR_REG], desp.src_addr ); -#ifdef DMADBG0 - PRINT( "%s(%d): %s DMA %d (0x%08x) src := 0x%08x\n", __FILE__, __LINE__, - ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp.src_addr ); -#endif - - store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_DAR_REG], desp.dest_addr ); -#ifdef DMADBG0 - PRINT( "%s(%d): %s DMA %d (0x%08x) dest := 0x%08x\n", __FILE__, __LINE__, - ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp.dest_addr ); -#endif - - store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_BCR_REG], desp.byte_cnt ); -#ifdef DMADBG0 - PRINT( "%s(%d): %s DMA %d (0x%08x) count := 0x%08x\n", __FILE__, __LINE__, - ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp.byte_cnt ); -#endif - - - return DMASUCCESS; - -} - -/************************************************************** - * function: DMA_Poke_Curr - * - * description: poke the current src, dest, byte count registers - * for a given channel. - * - * return DMASUCCESS if no error - * - * note: Due to the undeterministic parallelism, in chaining - * mode, the value returned by this function shall - * be taken as reference when the query is made rather - * than the absolute snapshot when the value is returned. - **************************************************************/ -static -DMAStatus DMA_Poke_Curr( LOCATION host, - unsigned int eumbbar, - unsigned int channel, - DMA_CURR* desp ) -{ - if ( channel != 0 && channel != 1 || desp == 0 ) - { - return DMAINVALID; - } - - desp->src_addr = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_SAR_REG] ); -#ifdef DMADBG0 - PRINT( "%s(%d): %s DMA %d (0x%08x) src : 0x%08x\n", __FILE__, __LINE__, - ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp->src_addr ); -#endif - - desp->dest_addr = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_DAR_REG] ); -#ifdef DMADBG0 - PRINT( "%s(%d): %s DMA %d (0x%08x) dest : 0x%08x\n", __FILE__, __LINE__, - ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp->dest_addr ); -#endif - - desp->byte_cnt = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_BCR_REG] ); -#ifdef DMADBG0 - PRINT( "%s(%d): %s DMA %d (0x%08x) count : 0x%08x\n", __FILE__, __LINE__, - ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp->byte_cnt ); -#endif - - - return DMASUCCESS; -} - -/***************************************************************** - * function: dma_error_func - * - * description: display the error information - * - * note: This seems like a highly convoluted way to handle messages, - * but I'll leave it as it was in device.c when I moved it into the - * DMA library source. - ****************************************************************/ -static -DMAStatus dma_error_func( unsigned int eumbbar, unsigned int chn, DMAStatus err) -{ - unsigned char *msg[] = - { - "Local Memory Error", - "PCI Error", - "Channel Busy", - "End-of-Segment Interrupt", - "End-of-Chain/Direct Interrupt", - }; - - if ( err >= DMALMERROR && err <= DMAEOCAINT ) - { - PRINT( "DMA Status: channel %d %s\n", chn, msg[err-DMASUCCESS-1] ); - } - - return err; - -} - -/************************************************************* - * function: DMA_ISR - * - * description: DMA interrupt service routine - * return DMAStatus value based on - * the status - * - *************************************************************/ -static -DMAStatus DMA_ISR( unsigned int eumbbar, - unsigned int channel, - DMAStatus (*lme_func)( unsigned int, unsigned int, DMAStatus ), - DMAStatus (*pe_func) ( unsigned int, unsigned int, DMAStatus ), - DMAStatus (*eosi_func)( unsigned int, unsigned int, DMAStatus ), - DMAStatus (*eocai_func)(unsigned int, unsigned int, DMAStatus )) -{ - - DMA_SR stat; - DMAStatus rval = DMANOEVENT; - unsigned int temp; - - if ( channel != 0 && channel != 1 ) - { - return DMAINVALID; - } - - if ( DMA_Get_Stat( LOCAL, eumbbar, channel, &stat ) != DMASUCCESS ) - { - return DMAINVALID; - } - - if ( stat.lme == 1 ) - { - /* local memory error */ - rval = DMALMERROR; - if ( lme_func != 0 ) - { - rval = (*lme_func)(eumbbar, channel, DMALMERROR ); - } - - } - else if ( stat.pe == 1 ) - { - /* PCI error */ - rval = DMAPERROR; - if ( pe_func != 0 ) - { - rval = (*pe_func)(eumbbar, channel, DMAPERROR ); - } - - } - else if ( stat.eosi == 1 ) - { - /* end-of-segment interrupt */ - rval = DMAEOSINT; - if ( eosi_func != 0 ) - { - rval = (*eosi_func)(eumbbar, channel, DMAEOSINT ); - } - } - else - { - /* End-of-chain/direct interrupt */ - rval = DMAEOCAINT; - if ( eocai_func != 0 ) - { - rval = (*eocai_func)(eumbbar, channel, DMAEOCAINT ); - } - } - - temp = ( stat.reserved0 & 0xffffff ) << 8; - temp |= ( ( stat.lme & 0x1 ) << 7 ); /* write one to clear */ - temp |= ( ( stat.reserved1 & 0x3 ) << 5 ); - temp |= ( ( stat.pe & 0x1 ) << 4 ); /* write one to clear */ - temp |= ( ( stat.reserved2 & 0x1 ) << 3 ); - temp |= ( ( stat.cb & 0x1 ) << 2 ); /* write one to clear */ - temp |= ( ( stat.eosi & 0x1 ) << 1 ); /* write one to clear */ - temp |= ( stat.eocai & 0x1 ); /* write one to clear */ - - store_runtime_reg( eumbbar, dma_reg_tb[LOCAL][channel*NUM_DMA_REG + DMA_SR_REG], temp ); - -#ifdef DMADBG0 - PRINT( "%s(%d): DMA channel %d SR := 0x%08x\n", __FILE__, __LINE__, channel, temp ); -#endif - - return rval; -} diff --git a/cpu/mpc824x/drivers/dma/dma2.S b/cpu/mpc824x/drivers/dma/dma2.S deleted file mode 100644 index ccbc226465..0000000000 --- a/cpu/mpc824x/drivers/dma/dma2.S +++ /dev/null @@ -1,42 +0,0 @@ -/************************************** - * - * copyright @ Motorola, 1999 - * - **************************************/ - -/********************************************************** - * function: load_runtime_reg - * - * input: r3 - value of eumbbar - * r4 - register offset in embedded utility space - * - * output: r3 - register content - **********************************************************/ - .text - .align 2 - .global load_runtime_reg - -load_runtime_reg: - - lwbrx r3,r4,r3 - sync - - bclr 20, 0 - -/**************************************************************** - * function: store_runtime_reg - * - * input: r3 - value of eumbbar - * r4 - register offset in embedded utility space - * r5 - new value to be stored - * - ****************************************************************/ - .text - .align 2 - .global store_runtime_reg -store_runtime_reg: - - stwbrx r5, r4, r3 - sync - - bclr 20,0 diff --git a/cpu/mpc824x/drivers/dma/dma_export.h b/cpu/mpc824x/drivers/dma/dma_export.h deleted file mode 100644 index 471e488c40..0000000000 --- a/cpu/mpc824x/drivers/dma/dma_export.h +++ /dev/null @@ -1,100 +0,0 @@ -#ifndef DMA_EXPORT_H -#define DMA_EXPORT_H - -/**************************************************** - * $Id: - * - * Copyright Motorola 1999 - * - * $Log: - * - ****************************************************/ - -/* These are the defined return values for the DMA_* functions. - * Any non-zero value indicates failure. Failure modes can be added for - * more detailed error reporting. - */ -typedef enum _dma_status -{ - DMA_SUCCESS = 0, - DMA_ERROR, -} DMA_Status; - -/* These are the defined channel transfer types. */ -typedef enum _dma_transfer_types -{ - DMA_M2M = 0, /* local memory to local memory */ - DMA_M2P = 1, /* local memory to PCI */ - DMA_P2M = 2, /* PCI to local memory */ - DMA_P2P = 3, /* PCI to PCI */ -} DMA_TRANSFER_TYPE; - -typedef enum _dma_interrupt_steer -{ - DMA_INT_STEER_LOCAL = 0, /* steer DMA int to local processor */ - DMA_INT_STEER_PCI = 1, /* steer DMA int to PCI bus through INTA_ */ -} DMA_INTERRUPT_STEER; - -typedef enum _dma_channel -{ - DMA_CHN_0 = 0, /* kahlua has two dma channels: 0 and 1 */ - DMA_CHN_1 = 1, -} DMA_CHANNEL; - -typedef enum _dma_snoop_mode -{ - DMA_SNOOP_DISABLE = 0, - DMA_SNOOP_ENABLE = 1, -} DMA_SNOOP_MODE; - -/******************** App. API ******************** - * The application API is for user level application - * to use the functionality provided by DMA driver. - * This is a "generic" DMA interface, it should contain - * nothing specific to the Kahlua implementation. - * Only the generic functions are exported by the library. - * - * Note: Its App.s responsibility to swap the data - * byte. In our API, we currently transfer whatever - * we are given - Big/Little Endian. This could - * become part of the DMA config, though. - **************************************************/ - - -/* Initialize DMA unit with the following: - * optional pointer to application layer print function - * - * These parameters may be added: - * ??? - * Interrupt enables, modes, etc. are set for each transfer. - * - * This function must be called before DMA unit can be used. - */ -extern DMA_Status DMA_Initialize( - int (*app_print_function)(char *,...)); /* pointer to optional "printf" - * provided by application - */ - -/* Perform the DMA transfer, only direct mode is currently implemented. - * At this point, I think it would be better to define a different - * function for chaining mode. - * Also, I'm not sure if it is appropriate to have the "generic" API - * accept snoop and int_steer parameters. The DINK user interface allows - * them, so for now I'll leave them. - * - * int_steer controls DMA interrupt steering to PCI or local processor - * type is the type of transfer: M2M, M2P, P2M, P2P - * source is the source address of the data - * dest is the destination address of the data - * len is the length of data to transfer - * channel is the DMA channel to use for the transfer - * snoop is the snoop enable control - */ -extern DMA_Status DMA_direct_transfer( DMA_INTERRUPT_STEER int_steer, - DMA_TRANSFER_TYPE type, - unsigned int source, - unsigned int dest, - unsigned int len, - DMA_CHANNEL channel, - DMA_SNOOP_MODE snoop); -#endif diff --git a/cpu/mpc824x/drivers/dma_export.h b/cpu/mpc824x/drivers/dma_export.h deleted file mode 100644 index 471e488c40..0000000000 --- a/cpu/mpc824x/drivers/dma_export.h +++ /dev/null @@ -1,100 +0,0 @@ -#ifndef DMA_EXPORT_H -#define DMA_EXPORT_H - -/**************************************************** - * $Id: - * - * Copyright Motorola 1999 - * - * $Log: - * - ****************************************************/ - -/* These are the defined return values for the DMA_* functions. - * Any non-zero value indicates failure. Failure modes can be added for - * more detailed error reporting. - */ -typedef enum _dma_status -{ - DMA_SUCCESS = 0, - DMA_ERROR, -} DMA_Status; - -/* These are the defined channel transfer types. */ -typedef enum _dma_transfer_types -{ - DMA_M2M = 0, /* local memory to local memory */ - DMA_M2P = 1, /* local memory to PCI */ - DMA_P2M = 2, /* PCI to local memory */ - DMA_P2P = 3, /* PCI to PCI */ -} DMA_TRANSFER_TYPE; - -typedef enum _dma_interrupt_steer -{ - DMA_INT_STEER_LOCAL = 0, /* steer DMA int to local processor */ - DMA_INT_STEER_PCI = 1, /* steer DMA int to PCI bus through INTA_ */ -} DMA_INTERRUPT_STEER; - -typedef enum _dma_channel -{ - DMA_CHN_0 = 0, /* kahlua has two dma channels: 0 and 1 */ - DMA_CHN_1 = 1, -} DMA_CHANNEL; - -typedef enum _dma_snoop_mode -{ - DMA_SNOOP_DISABLE = 0, - DMA_SNOOP_ENABLE = 1, -} DMA_SNOOP_MODE; - -/******************** App. API ******************** - * The application API is for user level application - * to use the functionality provided by DMA driver. - * This is a "generic" DMA interface, it should contain - * nothing specific to the Kahlua implementation. - * Only the generic functions are exported by the library. - * - * Note: Its App.s responsibility to swap the data - * byte. In our API, we currently transfer whatever - * we are given - Big/Little Endian. This could - * become part of the DMA config, though. - **************************************************/ - - -/* Initialize DMA unit with the following: - * optional pointer to application layer print function - * - * These parameters may be added: - * ??? - * Interrupt enables, modes, etc. are set for each transfer. - * - * This function must be called before DMA unit can be used. - */ -extern DMA_Status DMA_Initialize( - int (*app_print_function)(char *,...)); /* pointer to optional "printf" - * provided by application - */ - -/* Perform the DMA transfer, only direct mode is currently implemented. - * At this point, I think it would be better to define a different - * function for chaining mode. - * Also, I'm not sure if it is appropriate to have the "generic" API - * accept snoop and int_steer parameters. The DINK user interface allows - * them, so for now I'll leave them. - * - * int_steer controls DMA interrupt steering to PCI or local processor - * type is the type of transfer: M2M, M2P, P2M, P2P - * source is the source address of the data - * dest is the destination address of the data - * len is the length of data to transfer - * channel is the DMA channel to use for the transfer - * snoop is the snoop enable control - */ -extern DMA_Status DMA_direct_transfer( DMA_INTERRUPT_STEER int_steer, - DMA_TRANSFER_TYPE type, - unsigned int source, - unsigned int dest, - unsigned int len, - DMA_CHANNEL channel, - DMA_SNOOP_MODE snoop); -#endif diff --git a/cpu/mpc824x/drivers/i2o.h b/cpu/mpc824x/drivers/i2o.h deleted file mode 100644 index c47253d0f7..0000000000 --- a/cpu/mpc824x/drivers/i2o.h +++ /dev/null @@ -1,344 +0,0 @@ -#ifndef I2O_H -#define I2O_H -/********************************************************* - * - * copyright @ Motorola, 1999 - *********************************************************/ - -#define I2O_REG_OFFSET 0x0004 - -#define PCI_CFG_CLA 0x0B -#define PCI_CFG_SCL 0x0A -#define PCI_CFG_PIC 0x09 - -#define I2O_IMR0 0x0050 -#define I2O_IMR1 0x0054 -#define I2O_OMR0 0x0058 -#define I2O_OMR1 0x005C - -#define I2O_ODBR 0x0060 -#define I2O_IDBR 0x0068 - -#define I2O_OMISR 0x0030 -#define I2O_OMIMR 0x0034 -#define I2O_IMISR 0x0100 -#define I2O_IMIMR 0x0104 - -/* accessable to PCI master but local processor */ -#define I2O_IFQPR 0x0040 -#define I2O_OFQPR 0x0044 - -/* accessable to local processor */ -#define I2O_IFHPR 0x0120 -#define I2O_IFTPR 0x0128 -#define I2O_IPHPR 0x0130 -#define I2O_IPTPR 0x0138 -#define I2O_OFHPR 0x0140 -#define I2O_OFTPR 0x0148 -#define I2O_OPHPR 0x0150 -#define I2O_OPTPR 0x0158 -#define I2O_MUCR 0x0164 -#define I2O_QBAR 0x0170 - -#define I2O_NUM_MSG 2 - -typedef enum _i2o_status -{ - I2OSUCCESS = 0, - I2OINVALID, - I2OMSGINVALID, - I2ODBINVALID, - I2OQUEINVALID, - I2OQUEEMPTY, - I2OQUEFULL, - I2ONOEVENT, -} I2OSTATUS; - -typedef enum _queue_size -{ - QSIZE_4K = 0x02, - QSIZE_8K = 0x04, - QSIZE_16K = 0x08, - QSIZE_32K = 0x10, - QSIZe_64K = 0x20, -} QUEUE_SIZE; - -typedef enum _location -{ - LOCAL = 0, /* used by local processor to access its own on board device, - local processor's eumbbar is required */ - REMOTE, /* used by PCI master to access the devices on its PCI device, - device's pcsrbar is required */ -} LOCATION; - -/* door bell */ -typedef enum _i2o_in_db -{ - IN_DB = 1, - MC, /* machine check */ -} I2O_IN_DB; - -/* I2O PCI configuration identification */ -typedef struct _i2o_iop -{ - unsigned int base_class : 8; - unsigned int sub_class : 8; - unsigned int prg_code : 8; -} I2OIOP; - -/* I2O Outbound Message Interrupt Status Register */ -typedef struct _i2o_om_stat -{ - unsigned int rsvd0 : 26; - unsigned int opqi : 1; - unsigned int rsvd1 : 1; - unsigned int odi : 1; - unsigned int rsvd2 : 1; - unsigned int om1i : 1; - unsigned int om0i : 1; -} I2OOMSTAT; - -/* I2O inbound Message Interrupt Status Register */ -typedef struct _i2o_im_stat -{ - unsigned int rsvd0 : 23; - unsigned int ofoi : 1; - unsigned int ipoi : 1; - unsigned int rsvd1 : 1; - unsigned int ipqi : 1; - unsigned int mci : 1; - unsigned int idi : 1; - unsigned int rsvd2 : 1; - unsigned int im1i : 1; - unsigned int im0i : 1; -} I2OIMSTAT; - -/** - Enable the interrupt associated with in/out bound msg - - Inbound message interrupt generated by PCI master and serviced by local processor - local processor needs to enable its inbound interrupts it wants to handle (LOCAL) - - Outbound message interrupt generated by local processor and serviced by PCI master - PCI master needs to enable the devices' outbound interrupts it wants to handle (REMOTE) - **/ -extern I2OSTATUS I2OMsgEnable( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned char n ); /* b'1' - msg 0 - * b'10'- msg 1 - * b'11'- both - */ - -/** - Disable the interrupt associated with in/out bound msg - - local processor needs to disable its inbound interrupts it is not interested (LOCAL) - - PCI master needs to disable outbound interrupts of devices it is not interested (REMOTE) - **/ -extern I2OSTATUS I2OMsgDisable( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned char n ); /* b'1' - msg 0 - * b'10'- msg 1 - * b'11'- both - */ - -/** - Read the msg register either from local inbound msg 0/1, - or an outbound msg 0/1 of devices. - - If it is not local, pcsrbar must be passed to the function. - Otherwise eumbbar is passed. - - If it is remote, outbound msg of the device is read. - Otherwise local inbound msg is read. - **/ -extern I2OSTATUS I2OMsgGet ( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /*pcsrbar/eumbbar */ - unsigned int n, /* 0 or 1 */ - unsigned int *msg ); - -/** - Write to nth Msg register either on local outbound msg 0/1, - or aninbound msg 0/1 of devices - - If it is not local, pcsrbar must be passed to the function. - Otherwise eumbbar is passed. - - If it is remote, inbound msg on the device is written. - Otherwise local outbound msg is written. - **/ -extern I2OSTATUS I2OMsgPost( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /*pcsrbar/eumbbar */ - unsigned int n, /* 0 or 1 */ - unsigned int msg ); - -/** - Enable the In/Out DoorBell Interrupt - - InDoorBell interrupt is generated by PCI master and serviced by local processor - local processor needs to enable its inbound doorbell interrupts it wants to handle - - OutDoorbell interrupt is generated by local processor and serviced by PCI master - PCI master needs to enable outbound doorbell interrupts of the devices it wants to handle - **/ -extern I2OSTATUS I2ODBEnable( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned int in_db );/* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */ - -/** - Disable the In/Out DoorBell Interrupt - - local processor needs to disable its inbound doorbell interrupts it is not interested - - PCI master needs to disable outbound doorbell interrupts of devices it is not interested - - **/ -extern I2OSTATUS I2ODBDisable( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned int in_db ); /* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */ - -/** - Read a local indoorbell register, or an outdoorbell of devices. - Reading a doorbell register, the register will be cleared. - - If it is not local, pcsrbar must be passed to the function. - Otherwise eumbbar is passed. - - If it is remote, outdoorbell register on the device is read. - Otherwise local in doorbell is read - **/ -extern unsigned int I2ODBGet( LOCATION, /* REMOTE/LOCAL */ - unsigned int base); /* pcsrbar/eumbbar */ - -/** - Write to a local outdoorbell register, or an indoorbell register of devices. - - If it is not local, pcsrbar must be passed to the function. - Otherwise eumbbar is passed. - - If it is remote, in doorbell register on the device is written. - Otherwise local out doorbell is written - **/ -extern void I2ODBPost( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned int msg ); /* in / out */ - -/** - Read the outbound msg unit interrupt status of devices. Reading an interrupt status register, - the register will be cleared. - - The outbound interrupt status is AND with the outbound - interrupt mask. The result is returned. - - PCI master must pass the pcsrbar to the function. - **/ -extern I2OSTATUS I2OOutMsgStatGet( unsigned int pcsrbar, I2OOMSTAT * ); - -/** - Read the inbound msg unit interrupt status. Reading an interrupt status register, - the register will be cleared. - - The inbound interrupt status is AND with the inbound - interrupt mask. The result is returned. - - Local process must pass its eumbbar to the function. -**/ -extern I2OSTATUS I2OInMsgStatGet( unsigned int eumbbar, I2OIMSTAT * ); - -/** - Configure the I2O FIFO, including QBAR, IFHPR/IFTPR,IPHPR/IPTPR,OFHPR/OFTPR, OPHPR/OPTPR, - MUCR. - **/ -extern I2OSTATUS I2OFIFOInit( unsigned int eumbbar, - QUEUE_SIZE, - unsigned int qba);/* queue base address that must be aligned at 1M */ -/** - Enable the circular queue - **/ -extern I2OSTATUS I2OFIFOEnable( unsigned int eumbbar ); - -/** - Disable the circular queue - **/ -extern void I2OFIFODisable( unsigned int eumbbar ); - -/** - Enable the circular queue interrupt - PCI master enables outbound FIFO interrupt of device - Device enables its inbound FIFO interrupt - **/ -extern void I2OFIFOIntEnable( LOCATION, unsigned int base ); - -/** - Disable the circular queue interrupt - PCI master disables outbound FIFO interrupt of device - Device disables its inbound FIFO interrupt - **/ -extern void I2OFIFOIntDisable( LOCATION, unsigned int base ); - -/** - Enable the circular queue overflow interrupt - **/ -extern void I2OFIFOOverflowIntEnable( unsigned int eumbbar ); - -/** - Disable the circular queue overflow interrupt - **/ -extern void I2OFIFOOverflowIntDisable( unsigned int eumbbar ); - -/** - Allocate a free msg frame from free FIFO. - - PCI Master allocates a free msg frame through inbound queue port of device(IFQPR) - while local processor allocates a free msg frame from outbound free queue(OFTPR) - - Unless both free queues are initialized, allocating a free MF will return 0xffffffff - **/ -extern I2OSTATUS I2OFIFOAlloc( LOCATION, - unsigned int base, - void **pMsg); -/** - Free a used msg frame back to free queue - PCI Master frees a MFA through outbound queue port of device(OFQPR) - while local processor frees a MFA into its inbound free queue(IFHPR) - - Used msg frame does not need to be recycled in the order they - read - - This function has to be called by PCI master to initialize Inbound free queue - and by device to initialize Outbound free queue before I2OFIFOAlloc can be used. - **/ -extern I2OSTATUS I2OFIFOFree( LOCATION, - unsigned int base, - void *pMsg ); - -/** - Post a msg into FIFO - PCI Master posts a msg through inbound queue port of device(IFQPR) - while local processor post a msg into its outbound post queue(OPHPR) - - The total number of msg must be less than the max size of the queue - Otherwise queue overflow interrupt will assert. - **/ -extern I2OSTATUS I2OFIFOPost( LOCATION, - unsigned int base, - void *pMsg ); - -/** - Read a msg from FIFO - PCI Master reads a msg through outbound queue port of device(OFQPR) - while local processor reads a msg from its inbound post queue(IPTPR) - **/ -extern I2OSTATUS I2OFIFOGet( LOCATION, - unsigned int base, - void **pMsg ); - -/** - Get the I2O PCI configuration identification register - **/ -extern I2OSTATUS I2OPCIConfigGet( LOCATION, - unsigned int base, - I2OIOP *); - -#endif diff --git a/cpu/mpc824x/drivers/i2o/Makefile b/cpu/mpc824x/drivers/i2o/Makefile deleted file mode 100644 index 3f5ca26683..0000000000 --- a/cpu/mpc824x/drivers/i2o/Makefile +++ /dev/null @@ -1,84 +0,0 @@ -########################################################################## -# -# Copyright Motorola, Inc. 1997 -# ALL RIGHTS RESERVED -# -# You are hereby granted a copyright license to use, modify, and -# distribute the SOFTWARE so long as this entire notice is retained -# without alteration in any modified and/or redistributed versions, -# and that such modified versions are clearly identified as such. -# No licenses are granted by implication, estoppel or otherwise under -# any patents or trademarks of Motorola, Inc. -# -# The SOFTWARE is provided on an "AS IS" basis and without warranty. -# To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS -# ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED -# WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR -# PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH -# REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS -# THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS. -# -# To the maximum extent permitted by applicable law, IN NO EVENT SHALL -# MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER -# (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF -# BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS -# INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR -# INABILITY TO USE THE SOFTWARE. -# -############################################################################ -TARGET = libi2o.a - -#DEBUG = -g -DEBUG = -LST = -Hanno -S -OPTIM = -CC = /risc/tools/pkgs/metaware/bin/hcppc -CFLAGS = -Hnocopyr -c -Hsds -Hon=Char_default_unsigned -Hon=Char_is_rep -I../inc -I/risc/tools/pkgs/metaware/inc -CCobj = $(CC) $(CFLAGS) $(DEBUG) $(OPTIM) -PREP = $(CC) $(CFLAGS) -P - -# Assembler used to build the .s files (for the board version) - -ASOPT = -big_si -c -ASDEBUG = -l -fm -AS = /risc/tools/pkgs/metaware/bin/asppc - -# Linker to bring .o files together into an executable. - -LKOPT = -Bbase=0 -Qn -q -r -LKCMD = -LINK = /risc/tools/pkgs/metaware/bin/ldppc $(LKCMD) $(LKOPT) - -# DOS Utilities - -DEL = rm -COPY = cp -LIST = ls - -OBJECTS = i2o1.o i2o2.o - -all: $(TARGET) - -$(TARGET): $(OBJECTS) - $(LINK) $(OBJECTS) -o $@ - -objects: i2o1.o - -clean: - $(DEL) -f *.o *.i *.map *.lst $(TARGET) $(OBJECTS) - -.s.o: - $(DEL) -f $*.i - $(PREP) -Hasmcpp $< - $(AS) $(ASOPT) $*.i -# $(AS) $(ASOPT) $(ASDEBUG) $*.i > $*.lst - -.c.o: - $(CCobj) $< - -.c.s: - $(CCobj) $(LST) $< - -i2o1.o: i2o.h i2o1.c - -i2o2.o: i2o.h i2o2.s diff --git a/cpu/mpc824x/drivers/i2o/Makefile_pc b/cpu/mpc824x/drivers/i2o/Makefile_pc deleted file mode 100644 index 6867f5837c..0000000000 --- a/cpu/mpc824x/drivers/i2o/Makefile_pc +++ /dev/null @@ -1,90 +0,0 @@ -########################################################################## -# -# makefile_pc for use with PC mksnt tools dink32/drivers/i2o -# -# Copyright Motorola, Inc. 1997 -# ALL RIGHTS RESERVED -# -# You are hereby granted a copyright license to use, modify, and -# distribute the SOFTWARE so long as this entire notice is retained -# without alteration in any modified and/or redistributed versions, -# and that such modified versions are clearly identified as such. -# No licenses are granted by implication, estoppel or otherwise under -# any patents or trademarks of Motorola, Inc. -# -# The SOFTWARE is provided on an "AS IS" basis and without warranty. -# To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS -# ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED -# WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR -# PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH -# REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS -# THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS. -# -# To the maximum extent permitted by applicable law, IN NO EVENT SHALL -# MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER -# (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF -# BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS -# INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR -# INABILITY TO USE THE SOFTWARE. -# -############################################################################ -TARGET = libi2o.a - -#DEBUG = -g -DEBUG = -LST = -Hanno -S -OPTIM = -CC = m:/old_tools/tools/hcppc/bin/hcppc -CFLAGS = -Hnocopyr -c -Hsds -Hon=Char_default_unsigned -Hon=Char_is_rep -I../inc -I/risc/tools/pkgs/metaware/inc -CCobj = $(CC) $(CFLAGS) $(DEBUG) $(OPTIM) -PREP = $(CC) $(CFLAGS) -P - -# Assembler used to build the .s files (for the board version) - -ASOPT = -big_si -c -ASDEBUG = -l -fm -AS = m:/old_tools/tools/hcppc/bin/asppc - -# Linker to bring .o files together into an executable. - -LKOPT = -Bbase=0 -Qn -q -r -LKCMD = -LINK = m:/old_tools/tools/hcppc/bin/ldppc $(LKCMD) $(LKOPT) - -# DOS Utilities - -DEL = rm -COPY = cp -LIST = ls - -OBJECTS = i2o1.o i2o2.o - -all: $(TARGET) - -$(TARGET): $(OBJECTS) - $(LINK) $(OBJECTS) -o $@ - -objects: i2o1.o - -clean: - $(DEL) -f *.o *.i *.map *.lst $(TARGET) $(OBJECTS) - -.s.o: - $(DEL) -f $*.i - $(PREP) -Hasmcpp $< - $(AS) $(ASOPT) $*.i -# $(AS) $(ASOPT) $(ASDEBUG) $*.i > $*.lst - -.c.o: - $(CCobj) $< - -.c.s: - $(CCobj) $(LST) $< - -i2o1.o: i2o.h i2o1.c - $(CCobj) $< - -i2o2.o: i2o.h i2o2.s - $(DEL) -f $*.i - $(PREP) -Hasmcpp $< - $(AS) $(ASOPT) $*.i diff --git a/cpu/mpc824x/drivers/i2o/i2o.h b/cpu/mpc824x/drivers/i2o/i2o.h deleted file mode 100644 index 71572b2596..0000000000 --- a/cpu/mpc824x/drivers/i2o/i2o.h +++ /dev/null @@ -1,345 +0,0 @@ -#ifndef I2O_H -#define I2O_H -/********************************************************* - * - * copyright @ Motorola, 1999 - * - *********************************************************/ - -#define I2O_REG_OFFSET 0x0004 - -#define PCI_CFG_CLA 0x0B -#define PCI_CFG_SCL 0x0A -#define PCI_CFG_PIC 0x09 - -#define I2O_IMR0 0x0050 -#define I2O_IMR1 0x0054 -#define I2O_OMR0 0x0058 -#define I2O_OMR1 0x005C - -#define I2O_ODBR 0x0060 -#define I2O_IDBR 0x0068 - -#define I2O_OMISR 0x0030 -#define I2O_OMIMR 0x0034 -#define I2O_IMISR 0x0100 -#define I2O_IMIMR 0x0104 - -/* accessable to PCI master but local processor */ -#define I2O_IFQPR 0x0040 -#define I2O_OFQPR 0x0044 - -/* accessable to local processor */ -#define I2O_IFHPR 0x0120 -#define I2O_IFTPR 0x0128 -#define I2O_IPHPR 0x0130 -#define I2O_IPTPR 0x0138 -#define I2O_OFHPR 0x0140 -#define I2O_OFTPR 0x0148 -#define I2O_OPHPR 0x0150 -#define I2O_OPTPR 0x0158 -#define I2O_MUCR 0x0164 -#define I2O_QBAR 0x0170 - -#define I2O_NUM_MSG 2 - -typedef enum _i2o_status -{ - I2OSUCCESS = 0, - I2OINVALID, - I2OMSGINVALID, - I2ODBINVALID, - I2OQUEINVALID, - I2OQUEEMPTY, - I2OQUEFULL, - I2ONOEVENT, -} I2OSTATUS; - -typedef enum _queue_size -{ - QSIZE_4K = 0x02, - QSIZE_8K = 0x04, - QSIZE_16K = 0x08, - QSIZE_32K = 0x10, - QSIZe_64K = 0x20, -} QUEUE_SIZE; - -typedef enum _location -{ - LOCAL = 0, /* used by local processor to access its own on board device, - local processor's eumbbar is required */ - REMOTE, /* used by PCI master to access the devices on its PCI device, - device's pcsrbar is required */ -} LOCATION; - -/* door bell */ -typedef enum _i2o_in_db -{ - IN_DB = 1, - MC, /* machine check */ -} I2O_IN_DB; - -/* I2O PCI configuration identification */ -typedef struct _i2o_iop -{ - unsigned int base_class : 8; - unsigned int sub_class : 8; - unsigned int prg_code : 8; -} I2OIOP; - -/* I2O Outbound Message Interrupt Status Register */ -typedef struct _i2o_om_stat -{ - unsigned int rsvd0 : 26; - unsigned int opqi : 1; - unsigned int rsvd1 : 1; - unsigned int odi : 1; - unsigned int rsvd2 : 1; - unsigned int om1i : 1; - unsigned int om0i : 1; -} I2OOMSTAT; - -/* I2O inbound Message Interrupt Status Register */ -typedef struct _i2o_im_stat -{ - unsigned int rsvd0 : 23; - unsigned int ofoi : 1; - unsigned int ipoi : 1; - unsigned int rsvd1 : 1; - unsigned int ipqi : 1; - unsigned int mci : 1; - unsigned int idi : 1; - unsigned int rsvd2 : 1; - unsigned int im1i : 1; - unsigned int im0i : 1; -} I2OIMSTAT; - -/** - Enable the interrupt associated with in/out bound msg - - Inbound message interrupt generated by PCI master and serviced by local processor - local processor needs to enable its inbound interrupts it wants to handle (LOCAL) - - Outbound message interrupt generated by local processor and serviced by PCI master - PCI master needs to enable the devices' outbound interrupts it wants to handle (REMOTE) - **/ -extern I2OSTATUS I2OMsgEnable( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned char n ); /* b'1' - msg 0 - * b'10'- msg 1 - * b'11'- both - */ - -/** - Disable the interrupt associated with in/out bound msg - - local processor needs to disable its inbound interrupts it is not interested (LOCAL) - - PCI master needs to disable outbound interrupts of devices it is not interested (REMOTE) - **/ -extern I2OSTATUS I2OMsgDisable( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned char n ); /* b'1' - msg 0 - * b'10'- msg 1 - * b'11'- both - */ - -/** - Read the msg register either from local inbound msg 0/1, - or an outbound msg 0/1 of devices. - - If it is not local, pcsrbar must be passed to the function. - Otherwise eumbbar is passed. - - If it is remote, outbound msg of the device is read. - Otherwise local inbound msg is read. - **/ -extern I2OSTATUS I2OMsgGet ( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /*pcsrbar/eumbbar */ - unsigned int n, /* 0 or 1 */ - unsigned int *msg ); - -/** - Write to nth Msg register either on local outbound msg 0/1, - or aninbound msg 0/1 of devices - - If it is not local, pcsrbar must be passed to the function. - Otherwise eumbbar is passed. - - If it is remote, inbound msg on the device is written. - Otherwise local outbound msg is written. - **/ -extern I2OSTATUS I2OMsgPost( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /*pcsrbar/eumbbar */ - unsigned int n, /* 0 or 1 */ - unsigned int msg ); - -/** - Enable the In/Out DoorBell Interrupt - - InDoorBell interrupt is generated by PCI master and serviced by local processor - local processor needs to enable its inbound doorbell interrupts it wants to handle - - OutDoorbell interrupt is generated by local processor and serviced by PCI master - PCI master needs to enable outbound doorbell interrupts of the devices it wants to handle - **/ -extern I2OSTATUS I2ODBEnable( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned int in_db );/* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */ - -/** - Disable the In/Out DoorBell Interrupt - - local processor needs to disable its inbound doorbell interrupts it is not interested - - PCI master needs to disable outbound doorbell interrupts of devices it is not interested - - **/ -extern I2OSTATUS I2ODBDisable( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned int in_db ); /* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */ - -/** - Read a local indoorbell register, or an outdoorbell of devices. - Reading a doorbell register, the register will be cleared. - - If it is not local, pcsrbar must be passed to the function. - Otherwise eumbbar is passed. - - If it is remote, outdoorbell register on the device is read. - Otherwise local in doorbell is read - **/ -extern unsigned int I2ODBGet( LOCATION, /* REMOTE/LOCAL */ - unsigned int base); /* pcsrbar/eumbbar */ - -/** - Write to a local outdoorbell register, or an indoorbell register of devices. - - If it is not local, pcsrbar must be passed to the function. - Otherwise eumbbar is passed. - - If it is remote, in doorbell register on the device is written. - Otherwise local out doorbell is written - **/ -extern void I2ODBPost( LOCATION, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned int msg ); /* in / out */ - -/** - Read the outbound msg unit interrupt status of devices. Reading an interrupt status register, - the register will be cleared. - - The outbound interrupt status is AND with the outbound - interrupt mask. The result is returned. - - PCI master must pass the pcsrbar to the function. - **/ -extern I2OSTATUS I2OOutMsgStatGet( unsigned int pcsrbar, I2OOMSTAT * ); - -/** - Read the inbound msg unit interrupt status. Reading an interrupt status register, - the register will be cleared. - - The inbound interrupt status is AND with the inbound - interrupt mask. The result is returned. - - Local process must pass its eumbbar to the function. -**/ -extern I2OSTATUS I2OInMsgStatGet( unsigned int eumbbar, I2OIMSTAT * ); - -/** - Configure the I2O FIFO, including QBAR, IFHPR/IFTPR,IPHPR/IPTPR,OFHPR/OFTPR, OPHPR/OPTPR, - MUCR. - **/ -extern I2OSTATUS I2OFIFOInit( unsigned int eumbbar, - QUEUE_SIZE, - unsigned int qba);/* queue base address that must be aligned at 1M */ -/** - Enable the circular queue - **/ -extern I2OSTATUS I2OFIFOEnable( unsigned int eumbbar ); - -/** - Disable the circular queue - **/ -extern void I2OFIFODisable( unsigned int eumbbar ); - -/** - Enable the circular queue interrupt - PCI master enables outbound FIFO interrupt of device - Device enables its inbound FIFO interrupt - **/ -extern void I2OFIFOIntEnable( LOCATION, unsigned int base ); - -/** - Disable the circular queue interrupt - PCI master disables outbound FIFO interrupt of device - Device disables its inbound FIFO interrupt - **/ -extern void I2OFIFOIntDisable( LOCATION, unsigned int base ); - -/** - Enable the circular queue overflow interrupt - **/ -extern void I2OFIFOOverflowIntEnable( unsigned int eumbbar ); - -/** - Disable the circular queue overflow interrupt - **/ -extern void I2OFIFOOverflowIntDisable( unsigned int eumbbar ); - -/** - Allocate a free msg frame from free FIFO. - - PCI Master allocates a free msg frame through inbound queue port of device(IFQPR) - while local processor allocates a free msg frame from outbound free queue(OFTPR) - - Unless both free queues are initialized, allocating a free MF will return 0xffffffff - **/ -extern I2OSTATUS I2OFIFOAlloc( LOCATION, - unsigned int base, - void **pMsg); -/** - Free a used msg frame back to free queue - PCI Master frees a MFA through outbound queue port of device(OFQPR) - while local processor frees a MFA into its inbound free queue(IFHPR) - - Used msg frame does not need to be recycled in the order they - read - - This function has to be called by PCI master to initialize Inbound free queue - and by device to initialize Outbound free queue before I2OFIFOAlloc can be used. - **/ -extern I2OSTATUS I2OFIFOFree( LOCATION, - unsigned int base, - void *pMsg ); - -/** - Post a msg into FIFO - PCI Master posts a msg through inbound queue port of device(IFQPR) - while local processor post a msg into its outbound post queue(OPHPR) - - The total number of msg must be less than the max size of the queue - Otherwise queue overflow interrupt will assert. - **/ -extern I2OSTATUS I2OFIFOPost( LOCATION, - unsigned int base, - void *pMsg ); - -/** - Read a msg from FIFO - PCI Master reads a msg through outbound queue port of device(OFQPR) - while local processor reads a msg from its inbound post queue(IPTPR) - **/ -extern I2OSTATUS I2OFIFOGet( LOCATION, - unsigned int base, - void **pMsg ); - -/** - Get the I2O PCI configuration identification register - **/ -extern I2OSTATUS I2OPCIConfigGet( LOCATION, - unsigned int base, - I2OIOP *); - -#endif diff --git a/cpu/mpc824x/drivers/i2o/i2o1.c b/cpu/mpc824x/drivers/i2o/i2o1.c deleted file mode 100644 index f058151c8b..0000000000 --- a/cpu/mpc824x/drivers/i2o/i2o1.c +++ /dev/null @@ -1,890 +0,0 @@ -/********************************************************* - * $Id - * - * copyright @ Motorola, 1999 - *********************************************************/ -#include "i2o.h" - -extern unsigned int load_runtime_reg( unsigned int eumbbar, unsigned int reg ); -#pragma Alias( load_runtime_reg, "load_runtime_reg" ); - -extern void store_runtime_reg( unsigned int eumbbar, unsigned int reg, unsigned int val ); -#pragma Alias( store_runtime_reg, "store_runtime_reg" ); - -typedef struct _fifo_stat -{ - QUEUE_SIZE qsz; - unsigned int qba; -} FIFOSTAT; - -FIFOSTAT fifo_stat = { QSIZE_4K, 0xffffffff }; - -/********************************************************************************** - * function: I2OMsgEnable - * - * description: Enable the interrupt associated with in/out bound msg - * return I2OSUCCESS if no error, otherwise return I2OMSGINVALID. - * - * All previously enabled interrupts are preserved. - * note: - * Inbound message interrupt generated by PCI master and serviced by local processor - * Outbound message interrupt generated by local processor and serviced by PCI master - * - * local processor needs to enable its inbound interrupts it wants to handle(LOCAL) - * PCI master needs to enable the outbound interrupts of devices it wants to handle(REMOTE) - ************************************************************************************/ -I2OSTATUS I2OMsgEnable ( LOCATION loc, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned char n ) /* b'1' - msg 0 - * b'10'- msg 1 - * b'11'- both - */ -{ - unsigned int reg, val; - if ( ( n & 0x3 ) == 0 ) - { - /* neither msg 0, nor msg 1 */ - return I2OMSGINVALID; - } - - n = (~n) & 0x3; - /* LOCATION - REMOTE : enable outbound message of device, pcsrbar as base - * LOCAL : enable local inbound message, eumbbar as base - */ - reg = ( loc == REMOTE ? I2O_OMIMR : I2O_IMIMR ); - val = load_runtime_reg( base, reg ); - - val &= 0xfffffffc; /* masked out the msg interrupt bits */ - val |= n; /* LSB are the one we want */ - store_runtime_reg( base, reg, val ); - - return I2OSUCCESS; -} - -/********************************************************************************* - * function: I2OMsgDisable - * - * description: Disable the interrupt associated with in/out bound msg - * Other previously enabled interrupts are preserved. - * return I2OSUCCESS if no error otherwise return I2OMSGINVALID - * - * note: - * local processor needs to disable its inbound interrupts it is not interested(LOCAL) - * PCI master needs to disable outbound interrupts of devices it is not interested(REMOTE) - *********************************************************************************/ -I2OSTATUS I2OMsgDisable( LOCATION loc, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned char n ) /* b'1' - msg 0 - * b'10'- msg 1 - * b'11'- both - */ -{ - unsigned int reg, val; - - if ( ( n & 0x3 ) == 0 ) - { - /* neither msg 0, nor msg 1 */ - return I2OMSGINVALID; - } - - /* LOCATION - REMOTE : disable outbound message interrupt of device, pcsrbar as base - * LOCAL : disable local inbound message interrupt, eumbbar as base - */ - reg = ( loc == REMOTE ? I2O_OMIMR : I2O_IMIMR ); - val = load_runtime_reg( base, reg ); - - val &= 0xfffffffc; /* masked out the msg interrupt bits */ - val |= ( n & 0x3 ); - store_runtime_reg( base, reg, val ); - - return I2OSUCCESS; - -} - -/************************************************************************** - * function: I2OMsgGet - * - * description: Local processor reads the nth Msg register from its inbound msg, - * or a PCI Master reads nth outbound msg from device - * - * return I2OSUCCESS if no error, otherwise return I2OMSGINVALID. - * - * note: - * If it is not local, pcsrbar must be passed to the function. Otherwise eumbbar is passed. - * If it is remote, outbound msg on the device is read; otherwise local inbound msg is read - *************************************************************************/ -I2OSTATUS I2OMsgGet ( LOCATION loc, /* REMOTE/LOCAL */ - unsigned int base, /*pcsrbar/eumbbar */ - unsigned int n, /* 0 or 1 */ - unsigned int *msg ) -{ - if ( n >= I2O_NUM_MSG || msg == 0 ) - { - return I2OMSGINVALID; - } - - if ( loc == REMOTE ) - { - /* read the outbound msg of the device, pcsrbar as base */ - *msg = load_runtime_reg( base, I2O_OMR0+n*I2O_REG_OFFSET ); - } - else - { - /* read the inbound msg sent by PCI master, eumbbar as base */ - *msg = load_runtime_reg( base, I2O_IMR0+n*I2O_REG_OFFSET ); - } - - return I2OSUCCESS; -} - -/*************************************************************** - * function: I2OMsgPost - * - * description: Kahlua writes to its nth outbound msg register - * PCI master writes to nth inbound msg register of device - * - * return I2OSUCCESS if no error, otherwise return I2OMSGINVALID. - * - * note: - * If it is not local, pcsrbar must be passed to the function. Otherwise eumbbar is passed. - * - * If it is remote, inbound msg on the device is written; otherwise local outbound msg is written - ***************************************************************/ -I2OSTATUS I2OMsgPost( LOCATION loc, /* REMOTE/LOCAL */ - unsigned int base, /*pcsrbar/eumbbar */ - unsigned int n, /* 0 or 1 */ - unsigned int msg ) -{ - if ( n >= I2O_NUM_MSG ) - { - return I2OMSGINVALID; - } - - if ( loc == REMOTE ) - { - /* write to the inbound msg register of the device, pcsrbar as base */ - store_runtime_reg( base, I2O_IMR0+n*I2O_REG_OFFSET, msg ); - } - else - { - /* write to the outbound msg register for PCI master to read, eumbbar as base */ - store_runtime_reg( base, I2O_OMR0+n*I2O_REG_OFFSET, msg ); - } - - return I2OSUCCESS; -} - -/*********************************************************************** - * function: I2ODBEnable - * - * description: Local processor enables it's inbound doorbell interrupt - * PCI master enables outbound doorbell interrupt of devices - * Other previously enabled interrupts are preserved. - * Return I2OSUCCESS if no error otherwise return I2ODBINVALID - * - * note: - * In DoorBell interrupt is generated by PCI master and serviced by local processor - * Out Doorbell interrupt is generated by local processor and serviced by PCI master - * - * Out Doorbell interrupt is generated by local processor and serviced by PCI master - * PCI master needs to enable the outbound doorbell interrupts of device it wants to handle - **********************************************************************/ -I2OSTATUS I2ODBEnable( LOCATION loc, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned int in_db ) /* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */ -{ - - /* LOCATION - REMOTE : PCI master initializes outbound doorbell message of device - * LOCAL : Kahlua initializes its inbound doorbell message - */ - unsigned int val; - - if ( loc == LOCAL && ( in_db & 0x3 ) == 0 ) - { - return I2ODBINVALID; - } - - if ( loc == REMOTE ) - { - /* pcsrbar is base */ - val = load_runtime_reg( base, I2O_OMIMR ); - val &= 0xfffffff7; - store_runtime_reg( base, I2O_OMIMR , val ); - } - else - { - /* eumbbar is base */ - val = load_runtime_reg( base, I2O_IMIMR); - in_db = ( (~in_db) & 0x3 ) << 3; - val = ( val & 0xffffffe7) | in_db; - store_runtime_reg( base, I2O_IMIMR, val ); - } - - return I2OSUCCESS; -} - -/********************************************************************************** - * function: I2ODBDisable - * - * description: local processor disables its inbound DoorBell Interrupt - * PCI master disables outbound DoorBell interrupt of device - * Other previously enabled interrupts are preserved. - * return I2OSUCCESS if no error.Otherwise return I2ODBINVALID - * - * note: - * local processor needs to disable its inbound doorbell interrupts it is not interested - * - * PCI master needs to disable outbound doorbell interrupts of device it is not interested - ************************************************************************************/ -I2OSTATUS I2ODBDisable( LOCATION loc, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned int in_db ) /* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */ -{ - /* LOCATION - REMOTE : handle device's out bound message initialization - * LOCAL : handle local in bound message initialization - */ - unsigned int val; - - if ( loc == LOCAL && ( in_db & 0x3 ) == 0 ) - { - return I2ODBINVALID; - } - - if ( loc == REMOTE ) - { - /* pcsrbar is the base */ - val = load_runtime_reg( base, I2O_OMIMR ); - val |= 0x8; - store_runtime_reg( base, I2O_OMIMR, val ); - } - else - { - val = load_runtime_reg( base, I2O_IMIMR); - in_db = ( in_db & 0x3 ) << 3; - val |= in_db; - store_runtime_reg( base, I2O_IMIMR, val ); - } - - return I2OSUCCESS; -} - -/********************************************************************************** - * function: I2ODBGet - * - * description: Local processor reads its in doorbell register, - * PCI master reads the outdoorbell register of device. - * After a doorbell register is read, the whole register will be cleared. - * Otherwise, HW keeps generating interrupt. - * - * note: - * If it is not local, pcsrbar must be passed to the function. - * Otherwise eumbbar is passed. - * - * If it is remote, out doorbell register on the device is read. - * Otherwise local in doorbell is read - * - * If the register is not cleared by write to it, any remaining bit of b'1's - * will cause interrupt pending. - *********************************************************************************/ -unsigned int I2ODBGet( LOCATION loc, /* REMOTE/LOCAL */ - unsigned int base) /* pcsrbar/eumbbar */ -{ - unsigned int msg, val; - - if ( loc == REMOTE ) - { - /* read outbound doorbell register of device, pcsrbar is the base */ - val = load_runtime_reg( base, I2O_ODBR ); - msg = val & 0xe0000000; - store_runtime_reg( base, I2O_ODBR, val ); /* clear the register */ - } - else - { - /* read the inbound doorbell register, eumbbar is the base */ - val = load_runtime_reg( base, I2O_IDBR ); - store_runtime_reg( base, I2O_IDBR, val ); /* clear the register */ - msg = val; - } - - return msg; -} - -/********************************************************************** - * function: I2ODBPost - * - * description: local processor writes to a outbound doorbell register, - * PCI master writes to the inbound doorbell register of device - * - * note: - * If it is not local, pcsrbar must be passed to the function. - * Otherwise eumbbar is passed. - * - * If it is remote, in doorbell register on the device is written. - * Otherwise local out doorbell is written - *********************************************************************/ -void I2ODBPost( LOCATION loc, /* REMOTE/LOCAL */ - unsigned int base, /* pcsrbar/eumbbar */ - unsigned int msg ) /* in / out */ -{ - if ( loc == REMOTE ) - { - /* write to inbound doorbell register of device, pcsrbar is the base */ - store_runtime_reg( base, I2O_IDBR, msg ); - } - else - { - /* write to local outbound doorbell register, eumbbar is the base */ - store_runtime_reg( base, I2O_ODBR, msg & 0x1fffffff ); - } - -} - -/******************************************************************** - * function: I2OOutMsgStatGet - * - * description: PCI master reads device's outbound msg unit interrupt status. - * Reading an interrupt status register, - * the register will be cleared. - * - * The value of the status register is AND with the outbound - * interrupt mask and result is returned. - * - * note: - * pcsrbar must be passed to the function. - ********************************************************************/ -I2OSTATUS I2OOutMsgStatGet( unsigned int pcsrbar, I2OOMSTAT *val ) -{ - unsigned int stat; - unsigned int mask; - - if ( val == 0 ) - { - return I2OINVALID; - } - - /* read device's outbound status */ - stat = load_runtime_reg( pcsrbar, I2O_OMISR ); - mask = load_runtime_reg( pcsrbar, I2O_OMIMR ); - store_runtime_reg( pcsrbar, I2O_OMISR, stat & 0xffffffd7); - - stat &= mask; - val->rsvd0 = ( stat & 0xffffffc0 ) >> 6; - val->opqi = ( stat & 0x00000020 ) >> 5; - val->rsvd1 = ( stat & 0x00000010 ) >> 4; - val->odi = ( stat & 0x00000008 ) >> 3; - val->rsvd2 = ( stat & 0x00000004 ) >> 2; - val->om1i = ( stat & 0x00000002 ) >> 1; - val->om0i = ( stat & 0x00000001 ); - - return I2OSUCCESS; -} - -/******************************************************************** - * function: I2OInMsgStatGet - * - * description: Local processor reads its inbound msg unit interrupt status. - * Reading an interrupt status register, - * the register will be cleared. - * - * The inbound msg interrupt status is AND with the inbound - * msg interrupt mask and result is returned. - * - * note: - * eumbbar must be passed to the function. - ********************************************************************/ -I2OSTATUS I2OInMsgStatGet(unsigned int eumbbar, I2OIMSTAT *val) -{ - unsigned int stat; - unsigned int mask; - - if ( val == 0 ) - { - return I2OINVALID; - } - - /* read device's outbound status */ - stat = load_runtime_reg( eumbbar, I2O_OMISR ); - mask = load_runtime_reg( eumbbar, I2O_OMIMR ); - store_runtime_reg( eumbbar, I2O_OMISR, stat & 0xffffffe7 ); - - stat &= mask; - val->rsvd0 = ( stat & 0xfffffe00 ) >> 9; - val->ofoi = ( stat & 0x00000100 ) >> 8; - val->ipoi = ( stat & 0x00000080 ) >> 7; - val->rsvd1 = ( stat & 0x00000040 ) >> 6; - val->ipqi = ( stat & 0x00000020 ) >> 5; - val->mci = ( stat & 0x00000010 ) >> 4; - val->idi = ( stat & 0x00000008 ) >> 3; - val->rsvd2 = ( stat & 0x00000004 ) >> 2; - val->im1i = ( stat & 0x00000002 ) >> 1; - val->im0i = ( stat & 0x00000001 ); - - return I2OSUCCESS; - -} - -/*********************************************************** - * function: I2OFIFOInit - * - * description: Configure the I2O FIFO, including QBAR, - * IFHPR/IFTPR, IPHPR/IPTPR, OFHPR/OFTPR, - * OPHPR/OPTPR, MUCR. - * - * return I2OSUCCESS if no error, - * otherwise return I2OQUEINVALID - * - * note: It is NOT this driver's responsibility of initializing - * MFA blocks, i.e., FIFO queue itself. The MFA blocks - * must be initialized before I2O unit can be used. - ***********************************************************/ -I2OSTATUS I2OFIFOInit( unsigned int eumbbar, - QUEUE_SIZE sz, /* value of CQS of MUCR */ - unsigned int qba) /* queue base address that must be aligned at 1M */ -{ - - if ( ( qba & 0xfffff ) != 0 ) - { - /* QBA must be aligned at 1Mbyte boundary */ - return I2OQUEINVALID; - } - - store_runtime_reg( eumbbar, I2O_QBAR, qba ); - store_runtime_reg( eumbbar, I2O_MUCR, (unsigned int)sz ); - store_runtime_reg( eumbbar, I2O_IFHPR, qba ); - store_runtime_reg( eumbbar, I2O_IFTPR, qba ); - store_runtime_reg( eumbbar, I2O_IPHPR, qba + 1 * ( sz << 11 )); - store_runtime_reg( eumbbar, I2O_IPTPR, qba + 1 * ( sz << 11 )); - store_runtime_reg( eumbbar, I2O_OFHPR, qba + 2 * ( sz << 11 )); - store_runtime_reg( eumbbar, I2O_OFTPR, qba + 2 * ( sz << 11 )); - store_runtime_reg( eumbbar, I2O_OPHPR, qba + 3 * ( sz << 11 )); - store_runtime_reg( eumbbar, I2O_OPTPR, qba + 3 * ( sz << 11 )); - - fifo_stat.qsz = sz; - fifo_stat.qba = qba; - - return I2OSUCCESS; -} - -/************************************************** - * function: I2OFIFOEnable - * - * description: Enable the circular queue - * return I2OSUCCESS if no error. - * Otherwise I2OQUEINVALID is returned. - * - * note: - *************************************************/ -I2OSTATUS I2OFIFOEnable( unsigned int eumbbar ) -{ - unsigned int val; - - if ( fifo_stat.qba == 0xfffffff ) - { - return I2OQUEINVALID; - } - - val = load_runtime_reg( eumbbar, I2O_MUCR ); - store_runtime_reg( eumbbar, I2O_MUCR, val | 0x1 ); - - return I2OSUCCESS; -} - -/************************************************** - * function: I2OFIFODisable - * - * description: Disable the circular queue - * - * note: - *************************************************/ -void I2OFIFODisable( unsigned int eumbbar ) -{ - if ( fifo_stat.qba == 0xffffffff ) - { - /* not enabled */ - return; - } - - unsigned int val = load_runtime_reg( eumbbar, I2O_MUCR ); - store_runtime_reg( eumbbar, I2O_MUCR, val & 0xfffffffe ); -} - -/**************************************************** - * function: I2OFIFOAlloc - * - * description: Allocate a free MFA from free FIFO. - * return I2OSUCCESS if no error. - * return I2OQUEEMPTY if no more free MFA. - * return I2OINVALID on other errors. - * - * A free MFA must be allocated before a - * message can be posted. - * - * note: - * PCI Master allocates a free MFA from inbound queue of device - * (pcsrbar is the base,) through the inbound queue port of device - * while local processor allocates a free MFA from its outbound - * queue (eumbbar is the base.) - * - ****************************************************/ -I2OSTATUS I2OFIFOAlloc( LOCATION loc, - unsigned int base, - void **pMsg ) -{ - I2OSTATUS stat = I2OSUCCESS; - void *pHdr, *pTil; - - if ( pMsg == 0 || *pMsg == 0 || fifo_stat.qba == 0xffffffff ) - { - /* not configured */ - return I2OQUEINVALID; - } - - if ( loc == REMOTE ) - { - /* pcsrbar is the base and read the inbound free tail ptr */ - pTil = (void *)load_runtime_reg( base, I2O_IFQPR ); - if ( ( (unsigned int)pTil & 0xFFFFFFF ) == 0xFFFFFFFF ) - { - stat = I2OQUEEMPTY; - } - else - { - *pMsg = pTil; - } - } - else - { - /* eumbbar is the base and read the outbound free tail ptr */ - pHdr = (void *)load_runtime_reg( base, I2O_OFHPR ); /* queue head */ - pTil = (void *)load_runtime_reg( base, I2O_OFTPR ); /* queue tail */ - - /* check underflow */ - if ( pHdr == pTil ) - { - /* hdr and til point to the same fifo item, no free MFA */ - stat = I2OQUEEMPTY; - } - else - { - /* update OFTPR */ - *pMsg = (void *)(*(unsigned char *)pTil); - pTil = (void *)((unsigned int)pTil + 4); - if ( (unsigned int)pTil == fifo_stat.qba + ( 4 * ( fifo_stat.qsz << 11 ) ) ) - { - /* reach the upper limit */ - pTil = (void *)(fifo_stat.qba + ( 3 * (fifo_stat.qsz << 11) )); - } - store_runtime_reg( base, I2O_OFTPR, (unsigned int)pTil ); - } - } - - return stat; -} - -/****************************************************** - * function: I2OFIFOFree - * - * description: Free a used MFA back to free queue after - * use. - * return I2OSUCCESS if no error. - * return I2OQUEFULL if inbound free queue - * overflow - * - * note: PCI Master frees a MFA into device's outbound queue - * (OFQPR) while local processor frees a MFA into its - * inbound queue (IFHPR). - *****************************************************/ -I2OSTATUS I2OFIFOFree( LOCATION loc, - unsigned int base, - void *pMsg ) -{ - void **pHdr, **pTil; - I2OSTATUS stat = I2OSUCCESS; - - if ( fifo_stat.qba == 0xffffffff || pMsg == 0 ) - { - return I2OQUEINVALID; - } - - if ( loc == REMOTE ) - { - /* pcsrbar is the base */ - store_runtime_reg( base, I2O_OFQPR, (unsigned int)pMsg ); - } - else - { - /* eumbbar is the base */ - pHdr = (void **)load_runtime_reg( base, I2O_IFHPR ); - pTil = (void **)load_runtime_reg( base, I2O_IFTPR ); - - /* store MFA */ - *pHdr = pMsg; - - /* update IFHPR */ - pHdr += 4; - - if ( (unsigned int)pHdr == fifo_stat.qba + ( fifo_stat.qsz << 11 ) ) - { - /* reach the upper limit */ - pHdr = (void **)fifo_stat.qba; - } - - /* check inbound free queue overflow */ - if ( pHdr != pTil ) - { - store_runtime_reg( base, I2O_OPHPR, (unsigned int)pHdr); - } - else - { - stat = I2OQUEFULL; - } - - } - - return stat; - -} - -/********************************************* - * function: I2OFIFOPost - * - * description: Post a msg into FIFO post queue - * the value of msg must be the one - * returned by I2OFIFOAlloc - * - * note: PCI Master posts a msg into device's inbound queue - * (IFQPR) while local processor post a msg into device's - * outbound queue (OPHPR) - *********************************************/ -I2OSTATUS I2OFIFOPost( LOCATION loc, - unsigned int base, - void *pMsg ) -{ - void **pHdr, **pTil; - I2OSTATUS stat = I2OSUCCESS; - - if ( fifo_stat.qba == 0xffffffff || pMsg == 0 ) - { - return I2OQUEINVALID; - } - - if ( loc == REMOTE ) - { - /* pcsrbar is the base */ - store_runtime_reg( base, I2O_IFQPR, (unsigned int)pMsg ); - } - else - { - /* eumbbar is the base */ - pHdr = (void **)load_runtime_reg( base, I2O_OPHPR ); - pTil = (void **)load_runtime_reg( base, I2O_OPTPR ); - - /* store MFA */ - *pHdr = pMsg; - - /* update IFHPR */ - pHdr += 4; - - if ( (unsigned int)pHdr == fifo_stat.qba + 3 * ( fifo_stat.qsz << 11 ) ) - { - /* reach the upper limit */ - pHdr = (void **)(fifo_stat.qba + 2 * ( fifo_stat.qsz << 11 ) ); - } - - /* check post queue overflow */ - if ( pHdr != pTil ) - { - store_runtime_reg( base, I2O_OPHPR, (unsigned int)pHdr); - } - else - { - stat = I2OQUEFULL; - } - } - - return stat; -} - -/************************************************ - * function: I2OFIFOGet - * - * description: Read a msg from FIFO - * This function should be called - * only when there is a corresponding - * msg interrupt. - * - * note: PCI Master reads a msg from device's outbound queue - * (OFQPR) while local processor reads a msg from device's - * inbound queue (IPTPR) - ************************************************/ -I2OSTATUS I2OFIFOGet( LOCATION loc, - unsigned int base, - void **pMsg ) -{ - I2OSTATUS stat = I2OSUCCESS; - void *pHdr, *pTil; - - if ( pMsg == 0 || *pMsg == 0 || fifo_stat.qba == 0xffffffff ) - { - /* not configured */ - return I2OQUEINVALID; - } - - if ( loc == REMOTE ) - { - /* pcsrbar is the base */ - pTil = (void *)load_runtime_reg( base, I2O_OFQPR ); - if ( ( (unsigned int)pTil & 0xFFFFFFF ) == 0xFFFFFFFF ) - { - stat = I2OQUEEMPTY; - } - else - { - *pMsg = pTil; - } - } - else - { - /* eumbbar is the base and read the outbound free tail ptr */ - pHdr = (void *)load_runtime_reg( base, I2O_IPHPR ); /* queue head */ - pTil = (void *)load_runtime_reg( base, I2O_IPTPR ); /* queue tail */ - - /* check underflow */ - if ( pHdr == pTil ) - { - /* no free MFA */ - stat = I2OQUEEMPTY; - } - else - { - /* update OFTPR */ - *pMsg = (void *)(*(unsigned char *)pTil); - pTil = (void *)((unsigned int)pTil + 4); - if ( (unsigned int)pTil == fifo_stat.qba + 2 * ( fifo_stat.qsz << 11 ) ) - { - /* reach the upper limit */ - pTil = (void *)(fifo_stat.qba + 1 * (fifo_stat.qsz << 11) ); - } - - store_runtime_reg( base, I2O_IPTPR, (unsigned int)pTil ); - } - } - - return stat; -} - -/******************************************************** - * function: I2OIOP - * - * description: Get the I2O PCI configuration identification - * register. - * - * note: PCI master should pass pcsrbar while local processor - * should pass eumbbar. - *********************************************************/ -I2OSTATUS I2OPCIConfigGet( LOCATION loc, - unsigned int base, - I2OIOP * val) -{ - unsigned int tmp; - if ( val == 0 ) - { - return I2OINVALID; - } - tmp = load_runtime_reg( base, PCI_CFG_CLA ); - val->base_class = ( tmp & 0xFF) << 16; - tmp = load_runtime_reg( base, PCI_CFG_SCL ); - val->sub_class= ( (tmp & 0xFF) << 8 ); - tmp = load_runtime_reg( base, PCI_CFG_PIC ); - val->prg_code = (tmp & 0xFF); - return I2OSUCCESS; -} - -/********************************************************* - * function: I2OFIFOIntEnable - * - * description: Enable the circular post queue interrupt - * - * note: - * PCI master enables outbound FIFO interrupt of device - * pscrbar is the base - * Device enables its inbound FIFO interrupt - * eumbbar is the base - *******************************************************/ -void I2OFIFOIntEnable( LOCATION loc, unsigned int base ) -{ - unsigned int reg, val; - - /* LOCATION - REMOTE : enable outbound message of device, pcsrbar as base - * LOCAL : enable local inbound message, eumbbar as base - */ - reg = ( loc == REMOTE ? I2O_OMIMR : I2O_IMIMR ); - val = load_runtime_reg( base, reg ); - - val &= 0xffffffdf; /* clear the msg interrupt bits */ - store_runtime_reg( base, reg, val ); - -} - -/**************************************************** - * function: I2OFIFOIntDisable - * - * description: Disable the circular post queue interrupt - * - * note: - * PCI master disables outbound FIFO interrupt of device - * (pscrbar is the base) - * Device disables its inbound FIFO interrupt - * (eumbbar is the base) - *****************************************************/ -void I2OFIFOIntDisable( LOCATION loc, unsigned int base ) -{ - - /* LOCATION - REMOTE : disable outbound message interrupt of device, pcsrbar as base - * LOCAL : disable local inbound message interrupt, eumbbar as base - */ - unsigned int reg = ( loc == REMOTE ? I2O_OMIMR : I2O_IMIMR ); - unsigned int val = load_runtime_reg( base, reg ); - - val |= 0x00000020; /* masked out the msg interrupt bits */ - store_runtime_reg( base, reg, val ); - -} - -/********************************************************* - * function: I2OFIFOOverflowIntEnable - * - * description: Enable the circular queue overflow interrupt - * - * note: - * Device enables its inbound FIFO post overflow interrupt - * and outbound free overflow interrupt. - * eumbbar is the base - *******************************************************/ -void I2OFIFOOverflowIntEnable( unsigned int eumbbar ) -{ - unsigned int val = load_runtime_reg( eumbbar, I2O_IMIMR ); - - val &= 0xfffffe7f; /* clear the two overflow interrupt bits */ - store_runtime_reg( eumbbar, I2O_IMIMR, val ); - -} - -/**************************************************** - * function: I2OFIFOOverflowIntDisable - * - * description: Disable the circular queue overflow interrupt - * - * note: - * Device disables its inbound post FIFO overflow interrupt - * and outbound free FIFO overflow interrupt - * (eumbbar is the base) - *****************************************************/ -void I2OFIFOOverflowIntDisable( unsigned int eumbbar ) -{ - - unsigned int val = load_runtime_reg( eumbbar, I2O_IMIMR ); - - val |= 0x00000180; /* masked out the msg overflow interrupt bits */ - store_runtime_reg( eumbbar, I2O_IMIMR, val ); -} diff --git a/cpu/mpc824x/drivers/i2o/i2o2.S b/cpu/mpc824x/drivers/i2o/i2o2.S deleted file mode 100644 index 990f9ef9a5..0000000000 --- a/cpu/mpc824x/drivers/i2o/i2o2.S +++ /dev/null @@ -1,47 +0,0 @@ -/************************************** - * - * copyright @ Motorola, 1999 - * - **************************************/ - -/********************************************************** - * function: load_runtime_reg - * - * input: r3 - value of eumbbar - * r4 - register offset in embedded utility space - * - * output: r3 - register content - **********************************************************/ - .text - .align 2 - .global load_runtime_reg - -load_runtime_reg: - - xor r5,r5,r5 - or r5,r5,r3 /* save eumbbar */ - - lwbrx r3,r4,r5 - sync - - bclr 20, 0 - -/**************************************************************** - * function: store_runtime_reg - * - * input: r3 - value of eumbbar - * r4 - register offset in embedded utility space - * r5 - new value to be stored - * - ****************************************************************/ - .text - .align 2 - .global store_runtime_reg -store_runtime_reg: - - xor r0,r0,r0 - - stwbrx r5, r4, r3 - sync - - bclr 20,0 -- cgit v1.2.3 From 8cacfb85a89f9136d685697eb2c97dae5bddfe8d Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 7 Sep 2006 12:23:02 +0200 Subject: Change Yellowstone to use CFI write buffer Patch by Stefan Roese, 07 Aug 2006 --- CHANGELOG | 3 +++ include/configs/yellowstone.h | 2 ++ 2 files changed, 5 insertions(+) diff --git a/CHANGELOG b/CHANGELOG index 576cd7fb86..f71c864228 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Change Yellowstone to use CFI write buffer + Patch by Stefan Roese, 07 Aug 2006 + * Add support for AMCC Sequoia PPC440EPx eval board - Add support for PPC440EPx & PPC440GRx - Add support for PPC440EP(x)/GR(x) NAND controller diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h index bcafd8ba8b..ba27f37f6e 100644 --- a/include/configs/yellowstone.h +++ b/include/configs/yellowstone.h @@ -110,6 +110,8 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ + #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #ifdef CFG_ENV_IS_IN_FLASH -- cgit v1.2.3 From efa20585b3ccfdde431c19c6a9d9d8dae46fe5bb Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 7 Sep 2006 12:48:49 +0200 Subject: Fix build problem with CPCI440 Patch by Stefan Roese, 07 Sep 2006 --- CHANGELOG | 5 ++++- include/configs/CPCI440.h | 3 ++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index f71c864228..27d9226fde 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,8 +2,11 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix build problem with CPCI440 + Patch by Stefan Roese, 07 Sep 2006 + * Change Yellowstone to use CFI write buffer - Patch by Stefan Roese, 07 Aug 2006 + Patch by Stefan Roese, 07 Sep 2006 * Add support for AMCC Sequoia PPC440EPx eval board - Add support for PPC440EPx & PPC440GRx diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h index a5bc773e17..90d3a8d8fa 100644 --- a/include/configs/CPCI440.h +++ b/include/configs/CPCI440.h @@ -31,7 +31,8 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -#define CONFIG_EBONY 1 /* Board is ebony */ +#define CONFIG_CPCI440 1 /* Board is ebony */ +#define CONFIG_440GP 1 /* Specifc GP support */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ -- cgit v1.2.3 From 2d658967e1c0c75206fd218cf8bdb99022b4026a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 7 Sep 2006 13:09:53 +0200 Subject: Fix build problem cpu/ppc4xx/ndfc.c Patch by Stefan Roese, 07 Sep 2006 --- CHANGELOG | 3 +++ MAKEALL | 28 ++++++++++++++-------------- cpu/ppc4xx/ndfc.c | 4 +++- 3 files changed, 20 insertions(+), 15 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 27d9226fde..8ff9410c7f 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix build problem cpu/ppc4xx/ndfc.c + Patch by Stefan Roese, 07 Sep 2006 + * Fix build problem with CPCI440 Patch by Stefan Roese, 07 Sep 2006 diff --git a/MAKEALL b/MAKEALL index 8039f3d708..9d0f6b9129 100755 --- a/MAKEALL +++ b/MAKEALL @@ -75,20 +75,20 @@ LIST_8xx=" \ LIST_4xx=" \ ADCIOP AP1000 AR405 ASH405 \ - bubinga CANBT CMS700 CPCI2DP \ - CPCI405 CPCI4052 CPCI405AB CPCI405DT \ - CPCI440 CPCIISER4 CRAYL1 csb272 \ - csb472 DASA_SIM DP405 DU405 \ - ebony ERIC EXBITGEN G2000 \ - HH405 HUB405 JSE KAREF \ - luan METROBOX MIP405 MIP405T \ - ML2 ml300 ocotea OCRTC \ - ORSG p3p440 PCI405 pcs440ep \ - PIP405 PLU405 PMC405 PPChameleonEVB \ - sbc405 sequoia sequoia_nand VOH405 \ - VOM405 W7OLMC W7OLMG walnut \ - WUH405 XPEDITE1K yellowstone yosemite \ - yucca bamboo \ + bamboo bubinga CANBT CMS700 \ + CPCI2DP CPCI405 CPCI4052 CPCI405AB \ + CPCI405DT CPCI440 CPCIISER4 CRAYL1 \ + csb272 csb472 DASA_SIM DP405 \ + DU405 ebony ERIC EXBITGEN \ + G2000 HH405 HUB405 JSE \ + KAREF luan METROBOX MIP405 \ + MIP405T ML2 ml300 ocotea \ + OCRTC ORSG p3p440 PCI405 \ + pcs440ep PIP405 PLU405 PMC405 \ + PPChameleonEVB sbc405 sequoia sequoia_nand \ + VOH405 VOM405 W7OLMC W7OLMG \ + walnut WUH405 XPEDITE1K yellowstone \ + yosemite yucca bamboo \ " ######################################################################### diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c index e4ab326bbf..c255f93e6b 100644 --- a/cpu/ppc4xx/ndfc.c +++ b/cpu/ppc4xx/ndfc.c @@ -31,7 +31,9 @@ #include -#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY) +#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \ + (defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX)) #include #include -- cgit v1.2.3 From baf3124953490b0c954461b66545f37b67f3269d Mon Sep 17 00:00:00 2001 From: Marian Balakowicz Date: Thu, 7 Sep 2006 17:25:40 +0200 Subject: Add documentation on the latest build environment extentions to the README file. --- CHANGELOG | 3 +++ README | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+) diff --git a/CHANGELOG b/CHANGELOG index 8582b9797b..bf71913571 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add documentation on the latest build environment extentions to + the README file. + * Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory. * Fix LOG_DIR directory creation error. diff --git a/README b/README index e0240238b8..a0949f0d9b 100644 --- a/README +++ b/README @@ -2323,6 +2323,26 @@ images ready for download to / installation on your system: - "u-boot" is an image in ELF binary format - "u-boot.srec" is in Motorola S-Record format +By default the build is performed locally and the objects are saved +in the source directory. One of the two methods can be used to change +this behavior and build U-Boot to some external directory: + +1. Add O= to the make command line invocations: + + make O=/tmp/build distclean + make O=/tmp/build NAME_config + make O=/tmp/build all + +2. Set environment variable BUILD_DIR to point to the desired location: + + export BUILD_DIR=/tmp/build + make distclean + make NAME_config + make all + +Note that the command line "O=" setting overrides the BUILD_DIR environment +variable. + Please be aware that the Makefiles assume you are using GNU make, so for instance on NetBSD you might need to use "gmake" instead of @@ -2376,6 +2396,22 @@ or to build on a native PowerPC system you can type CROSS_COMPILE=' ' MAKEALL +When using the MAKEALL script, the default behaviour is to build U-Boot +in the source directory. This location can be changed by setting the +BUILD_DIR environment variable. Also, for each target built, the MAKEALL +script saves two log files (.ERR and .MAKEALL) in the +/LOG directory. This default location can be changed by +setting the MAKEALL_LOGDIR environment variable. For example: + + export BUILD_DIR=/tmp/build + export MAKEALL_LOGDIR=/tmp/log + CROSS_COMPILE=ppc_8xx- MAKEALL + +With the above settings build objects are saved in the /tmp/build, log +files are saved in the /tmp/log and the source tree remains clean during +the whole build process. + + See also "U-Boot Porting Guide" below. -- cgit v1.2.3 From a73c8dbb437fb55ecb660cb962c8c1cc85b8a654 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 12 Sep 2006 08:49:07 +0200 Subject: Update NAND boot documentation Patch by Stefan Roese, 12 Sep 2006 --- CHANGELOG | 5 ++++- Makefile | 4 ++-- doc/README.nand-boot-ppc440 | 24 ++++++++++++++++++++++++ nand_spl/board/amcc/sequoia/Makefile | 4 ++-- 4 files changed, 32 insertions(+), 5 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 4265049a2e..a6dc762348 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,7 +2,10 @@ Changes since U-Boot 1.1.4: ====================================================================== -* Add documentation on the latest build environment extensions to +* Update NAND boot documentation + Patch by Stefan Roese, 12 Sep 2006 + +* Add documentation on the latest build environment extensions to the README file. * Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory. diff --git a/Makefile b/Makefile index 291dc61055..84d936701f 100644 --- a/Makefile +++ b/Makefile @@ -78,7 +78,7 @@ saved-output := $(BUILD_DIR) # Attempt to create a output directory. $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) -# Verify if it was successful. +# Verify if it was successful. BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) endif # ifneq ($(BUILD_DIR),) @@ -272,7 +272,7 @@ $(NAND_SPL): version $(MAKE) -C nand_spl all $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin - cat nand_spl/u-boot-spl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin + cat nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin version: @echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \ diff --git a/doc/README.nand-boot-ppc440 b/doc/README.nand-boot-ppc440 index a82a10ee6a..a1c1d8c444 100644 --- a/doc/README.nand-boot-ppc440 +++ b/doc/README.nand-boot-ppc440 @@ -33,4 +33,28 @@ is set up. While still running from cache, I experienced problems accessing the NAND controller. +Example: Build and install NAND boot image for Sequoia (440EPx): + +a) Configure for sequoia with NAND boot support: +# make sequoia_nand_config + +b) Build image(s) +# make + +This will generate the SPL image in the "nand_spl" directory: +nand_spl/u-boot-spl.bin +Also another image is created spanning a whole NAND block (16kBytes): +nand_spl/u-boot-spl-16k.bin +The main NAND U-Boot image is generated in the toplevel directory: +u-boot.bin +A combined image of u-boot-spl-16k.bin and u-boot.bin is also created: +u-boot-nand.bin + +This image should be programmed at offset 0 in the NAND flash: + +# tftp 100000 /tftpboot/sequoia/u-boot-nand.bin +# nand erase 0 60000 +# nand write 100000 0 60000 + + September 07 2006, Stefan Roese diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile index 6c07e3dd8d..897aa8b6b7 100644 --- a/nand_spl/board/amcc/sequoia/Makefile +++ b/nand_spl/board/amcc/sequoia/Makefile @@ -35,11 +35,11 @@ COBJS = nand_boot.o ndfc.o sdram.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -ALL = u-boot-spl u-boot-spl.bin u-boot-spl-4k.bin +ALL = u-boot-spl u-boot-spl.bin u-boot-spl-16k.bin all: $(obj).depend $(ALL) -u-boot-spl-4k.bin: u-boot-spl +u-boot-spl-16k.bin: u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ u-boot-spl.bin: u-boot-spl -- cgit v1.2.3 From d12ae80889568365ecb9e6698322f9771ae76dde Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 12 Sep 2006 20:19:10 +0200 Subject: Add NAND environment support for PPC440EPx Sequoia NAND boot config Patch by Stefan Roese, 12 Sep 2006 --- CHANGELOG | 3 +++ board/amcc/sequoia/u-boot-nand.lds | 8 +++++- common/env_nand.c | 50 +++++++++++++++++++++++++++++++++++++- common/environment.c | 3 ++- include/configs/sequoia.h | 27 ++++++-------------- include/environment.h | 4 +++ nand_spl/nand_boot.c | 3 +-- 7 files changed, 73 insertions(+), 25 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index a6dc762348..9840863bf7 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add NAND environment support for PPC440EPx Sequoia NAND boot config + Patch by Stefan Roese, 12 Sep 2006 + * Update NAND boot documentation Patch by Stefan Roese, 12 Sep 2006 diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds index c3d3d968fe..cf2e2b5581 100644 --- a/board/amcc/sequoia/u-boot-nand.lds +++ b/board/amcc/sequoia/u-boot-nand.lds @@ -1,5 +1,5 @@ /* - * (C) Copyright 2002 + * (C) Copyright 2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -56,6 +56,12 @@ SECTIONS cpu/ppc4xx/start.o (.text) + /* Align to next NAND block */ + . = ALIGN(0x4000); + common/environment.o (.ppcenv) + /* Keep some space here for redundant env and potential bad env blocks */ + . = ALIGN(0x10000); + *(.text) *(.fixup) *(.got1) diff --git a/common/env_nand.c b/common/env_nand.c index 0a05b09a7a..67c4a4e011 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -2,7 +2,7 @@ * (C) Copyright 2004 * Jian Zhang, Texas Instruments, jzhang@ti.com. - * (C) Copyright 2000-2004 + * (C) Copyright 2000-2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH @@ -76,7 +76,9 @@ env_t *env_ptr = 0; /* local functions */ +#if !defined(ENV_IS_EMBEDDED) static void use_default(void); +#endif DECLARE_GLOBAL_DATA_PTR; @@ -91,11 +93,55 @@ uchar env_get_char_spec (int index) * Mark it OK for now. env_relocate() in env_common.c * will call our relocate function which will does * the real validation. + * + * When using a NAND boot image (like sequoia_nand), the environment + * can be embedded or attached to the U-Boot image in NAND flash. This way + * the SPL loads not only the U-Boot image from NAND but also the + * environment. */ int env_init(void) { +#if defined(ENV_IS_EMBEDDED) + ulong total; + int crc1_ok = 0, crc2_ok = 0; + env_t *tmp_env1, *tmp_env2; + + total = CFG_ENV_SIZE; + + tmp_env1 = env_ptr; + tmp_env2 = (env_t *)((ulong)env_ptr + CFG_ENV_SIZE); + + crc1_ok = (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc); + crc2_ok = (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc); + + if (!crc1_ok && !crc2_ok) + gd->env_valid = 0; + else if(crc1_ok && !crc2_ok) + gd->env_valid = 1; + else if(!crc1_ok && crc2_ok) + gd->env_valid = 2; + else { + /* both ok - check serial */ + if(tmp_env1->flags == 255 && tmp_env2->flags == 0) + gd->env_valid = 2; + else if(tmp_env2->flags == 255 && tmp_env1->flags == 0) + gd->env_valid = 1; + else if(tmp_env1->flags > tmp_env2->flags) + gd->env_valid = 1; + else if(tmp_env2->flags > tmp_env1->flags) + gd->env_valid = 2; + else /* flags are equal - almost impossible */ + gd->env_valid = 1; + } + + if (gd->env_valid == 1) + env_ptr = tmp_env1; + else if (gd->env_valid == 2) + env_ptr = tmp_env2; +#else /* ENV_IS_EMBEDDED */ gd->env_addr = (ulong)&default_environment[0]; gd->env_valid = 1; +#endif /* ENV_IS_EMBEDDED */ return (0); } @@ -236,6 +282,7 @@ void env_relocate_spec (void) } #endif /* CFG_ENV_OFFSET_REDUND */ +#if !defined(ENV_IS_EMBEDDED) static void use_default() { puts ("*** Warning - bad CRC or NAND, using default environment\n\n"); @@ -253,5 +300,6 @@ static void use_default() gd->env_valid = 1; } +#endif #endif /* CFG_ENV_IS_IN_NAND */ diff --git a/common/environment.c b/common/environment.c index 81471ce71c..19bdeb0f62 100644 --- a/common/environment.c +++ b/common/environment.c @@ -60,7 +60,8 @@ defined(CONFIG_RRVISION) || \ defined(CONFIG_TRAB) || \ defined(CONFIG_PPCHAMELEONEVB) || \ - defined(CONFIG_M5271EVB)) && \ + defined(CONFIG_M5271EVB) || \ + defined(CONFIG_NAND_U_BOOT)) && \ defined(ENV_CRC) /* Environment embedded in U-Boot .ppcenv section */ /* XXX - This only works with GNU C */ # define __PPCENV__ __attribute__ ((section(".ppcenv"))) diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index d3fcc032aa..639765d599 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -69,14 +69,9 @@ /*----------------------------------------------------------------------- * Initial RAM & stack pointer *----------------------------------------------------------------------*/ -#if 0 /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ -#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ -#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ -#else #define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ #define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ -#endif #define CFG_INIT_RAM_END (4 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ @@ -98,18 +93,11 @@ /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ -/* - * Define here the location of the environment variables (FLASH or EEPROM). - * Note: DENX encourages to use redundant environment in FLASH. - */ -#if 1 /* test-only */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #else #define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ #endif -#if 0 -#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#endif /*----------------------------------------------------------------------- * FLASH related @@ -189,8 +177,12 @@ #undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ #ifdef CFG_ENV_IS_IN_NAND -#define CFG_ENV_SIZE 0x4000 -#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_NAND_U_BOOT_SIZE) +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/sequoia/u-boot-nand.lds for details. + */ +#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE +#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE) #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) #endif @@ -214,11 +206,6 @@ #define CFG_EEPROM_PAGE_WRITE_BITS 3 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 -#ifdef CFG_ENV_IS_IN_EEPROM -#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */ -#define CFG_ENV_OFFSET 0x0 -#endif /* CFG_ENV_IS_IN_EEPROM */ - /* I2C SYSMON (LM75, AD7414 is almost compatible) */ #define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ #define CONFIG_DTT_AD7414 1 /* use AD7414 */ diff --git a/include/environment.h b/include/environment.h index 422f800897..26b07120da 100644 --- a/include/environment.h +++ b/include/environment.h @@ -79,6 +79,10 @@ # ifdef CFG_ENV_OFFSET_REDUND # define CFG_REDUNDAND_ENVIRONMENT # endif +# if defined(CONFIG_NAND_U_BOOT) +/* Use embedded environment in NAND boot versions */ +# define ENV_IS_EMBEDDED 1 +# endif #endif /* CFG_ENV_IS_IN_NAND */ diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index 6e3af13939..21abb09e39 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -166,8 +166,7 @@ void nand_boot(void) /* * Load U-Boot image from NAND into RAM */ - ret = nand_load(&nand_info, CFG_NAND_U_BOOT_OFFS, - CFG_NAND_U_BOOT_SIZE, + ret = nand_load(&nand_info, CFG_NAND_U_BOOT_OFFS, CFG_NAND_U_BOOT_SIZE, (uchar *)CFG_NAND_U_BOOT_DST); /* -- cgit v1.2.3 From a87d46f7327eedead89284a0d0c5e5a769b984b9 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 13 Sep 2006 10:23:06 +0200 Subject: Fix alignment problem in "mtdparts" command --- CHANGELOG | 2 ++ common/cmd_jffs2.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/CHANGELOG b/CHANGELOG index 4265049a2e..4e9cf16489 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix alignment problem in "mtdparts" command + * Add documentation on the latest build environment extensions to the README file. diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c index 201c3c1553..b5fd41724f 100644 --- a/common/cmd_jffs2.c +++ b/common/cmd_jffs2.c @@ -1268,7 +1268,7 @@ static void list_partitions(void) part_num = 0; list_for_each(pentry, &dev->parts) { part = list_entry(pentry, struct part_info, link); - printf(" %d: %-22s\t0x%08x\t0x%08x\t%d\n", + printf("%2d: %-20s0x%08x\t0x%08x\t%d\n", part_num, part->name, part->size, part->offset, part->mask_flags); -- cgit v1.2.3 From d214fbbd87e5843855daf6698c95fb96cb529b99 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 13 Sep 2006 10:29:32 +0200 Subject: Cleanup examples binaries --- CHANGELOG | 2 ++ Makefile | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/CHANGELOG b/CHANGELOG index 786f01b64e..a25134fa73 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Cleanup examples binaries + * Add NAND environment support for PPC440EPx Sequoia NAND boot config Patch by Stefan Roese, 12 Sep 2006 diff --git a/Makefile b/Makefile index 84d936701f..ccf7f9f88f 100644 --- a/Makefile +++ b/Makefile @@ -2209,7 +2209,7 @@ clean: rm -f $(obj)examples/hello_world $(obj)examples/timer \ $(obj)examples/eepro100_eeprom $(obj)examples/sched \ $(obj)examples/mem_to_mem_idma2intr $(obj)examples/82559_eeprom \ - $(obj)examples/smc91111_eeprom \ + $(obj)examples/smc91111_eeprom $(obj)examples/interrupt \ $(obj)examples/test_burst rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \ $(obj)tools/gen_eth_addr -- cgit v1.2.3 From aeec782b020930732eab075af97212c3f03afcae Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 13 Sep 2006 10:47:05 +0200 Subject: Disable autoboot abort for FO300 when silent mode is enabled (according to S1 switch setting). Patch by Marian Balakowicz, 12 Sep 2006 --- CHANGELOG | 3 ++ board/tqm5200/tqm5200.c | 74 +++++++++++++++++++++++++++++-------------------- 2 files changed, 47 insertions(+), 30 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index a25134fa73..a896e253a9 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Disable autoboot abort for FO300 when silent mode is enabled + (according to S1 switch setting). + * Cleanup examples binaries * Add NAND environment support for PPC440EPx Sequoia NAND boot config diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index 2a0d542ef8..b76579cb43 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -446,6 +446,43 @@ int board_early_init_r (void) #endif #endif /* CONFIG_PS2MULT */ +#ifdef CONFIG_FO300 +int silent_boot (void) +{ + vu_long timer3_status; + + /* Configure GPT3 as GPIO input */ + *(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004; + + /* Read in TIMER_3 pin status */ + timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS; + +#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED + /* Force silent console mode if S1 switch + * is in closed position (TIMER_3 pin status is LOW). */ + if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0) + return 1; +#else + /* Force silent console mode if S1 switch + * is in open position (TIMER_3 pin status is HIGH). */ + if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1) + return 1; +#endif + + return 0; +} + +int board_early_init_f (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + if (silent_boot()) + gd->flags |= GD_FLG_SILENT; + + return 0; +} +#endif /* CONFIG_FO300 */ + int last_stage_init (void) { /* @@ -538,6 +575,13 @@ int last_stage_init (void) __asm__ volatile ("sync"); } +#ifdef CONFIG_FO300 + if (silent_boot()) { + setenv("bootdelay", "0"); + disable_ctrlc(1); + } +#endif + return 0; } @@ -729,33 +773,3 @@ int board_get_height (void) } #endif /* CONFIG_VIDEO_SM501 */ - - -#ifdef CONFIG_BOARD_EARLY_INIT_F -#ifdef CONFIG_FO300 -int board_early_init_f (void) -{ - vu_long timer3_status; - DECLARE_GLOBAL_DATA_PTR; - - /* Configure GPT3 as GPIO input */ - *(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004; - - /* Read in TIMER_3 pin status */ - timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS; - -#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED - /* Force silent console mode if S1 switch - * is in closed position (TIMER_3 pin status is LOW). */ - if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0) -#else - /* Force silent console mode if S1 switch - * is in open position (TIMER_3 pin status is HIGH). */ - if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1) -#endif - gd->flags |= GD_FLG_SILENT; - - return 0; -} -#endif /* CONFIG_FO300 */ -#endif /* CONFIG_BOARD_EARLY_INIT_F */ -- cgit v1.2.3 From 854bc8da75709f13dab4cfa6e9094c0cb49b5c5a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 13 Sep 2006 13:51:58 +0200 Subject: Add support for AMCC Rainier PPX440GRx eval board Patch by Stefan Roese, 13 Sep 2006 --- CHANGELOG | 3 +++ Makefile | 15 +++++++++++++++ board/amcc/sequoia/sequoia.c | 8 ++++++++ cpu/ppc4xx/4xx_enet.c | 2 +- cpu/ppc4xx/vecnum.h | 2 +- include/configs/sequoia.h | 13 ++++++++++++- 6 files changed, 40 insertions(+), 3 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index a896e253a9..0f4b4d561e 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -7,6 +7,9 @@ Changes since U-Boot 1.1.4: * Cleanup examples binaries +* Add support for AMCC Rainier PPX440GRx eval board + Patch by Stefan Roese, 13 Sep 2006 + * Add NAND environment support for PPC440EPx Sequoia NAND boot config Patch by Stefan Roese, 12 Sep 2006 diff --git a/Makefile b/Makefile index ccf7f9f88f..f48ca6cebb 100644 --- a/Makefile +++ b/Makefile @@ -1142,6 +1142,21 @@ PPChameleonEVB_HI_33_config: unconfig } @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave +rainier_config: unconfig + @echo "#define CONFIG_RAINIER" > include/config.h + @echo "Configuring for rainier board as subset of sequoia..." + @$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc + +rainier_nand_config: unconfig + @echo "#define CONFIG_RAINIER" > include/config.h + @echo "Configuring for rainier board as subset of sequoia..." + @ln -s board/amcc/sequoia/Makefile nand_spl/Makefile + @echo "#define CONFIG_NAND_U_BOOT" >> include/config.h + @echo "Compile NAND boot image for sequoia" + @$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc + @echo "TEXT_BASE = 0x01000000" >board/amcc/sequoia/config.tmp + @echo "CONFIG_NAND_U_BOOT = y" >> include/config.mk + sbc405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 95734b9c57..a8ba2c0831 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -140,10 +140,12 @@ int misc_init_r(void) { uint pbcr; int size_val = 0; +#ifdef CONFIG_440EPX unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; char *act = getenv("usbact"); +#endif /* * FLASH stuff... @@ -211,6 +213,7 @@ int misc_init_r(void) /* * USB suff... */ +#ifdef CONFIG_440EPX if (act == NULL || strcmp(act, "hostdev") == 0) { /* SDR Setting */ mfsdr(SDR0_PFC1, sdr0_pfc1); @@ -322,6 +325,7 @@ int misc_init_r(void) printf("USB: Device(int phy)\n"); } +#endif /* CONFIG_440EPX */ return 0; } @@ -330,7 +334,11 @@ int checkboard(void) { char *s = getenv("serial#"); +#ifdef CONFIG_440EPX printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board"); +#else + printf("Board: Rainier - AMCC PPC440GRx Evaluation Board"); +#endif if (s != NULL) { puts(", serial# "); puts(s); diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index 5b1c17c351..81d49ffdfe 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -133,7 +133,7 @@ #define BI_PHYMODE_GMII 3 #define BI_PHYMODE_RTBI 4 #define BI_PHYMODE_TBI 5 -#if defined (CONFIG_440EPX) +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define BI_PHYMODE_SMII 6 #define BI_PHYMODE_MII 7 #endif diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h index 70e436aab2..685d48bcf6 100644 --- a/cpu/ppc4xx/vecnum.h +++ b/cpu/ppc4xx/vecnum.h @@ -31,7 +31,7 @@ #ifndef _VECNUMS_H_ #define _VECNUMS_H_ -#if defined(CONFIG_440EPX) || defined(CONFIG_440_GRX) +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC 0 */ #define VECNUM_U0 0 /* UART 0 */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 639765d599..f67fd9163d 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -31,8 +31,13 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ +/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */ +#ifndef CONFIG_RAINIER #define CONFIG_SEQUOIA 1 /* Board is Sequoia */ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#else +#define CONFIG_440GRX 1 /* Specific PPC440GRx */ +#endif #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ @@ -272,12 +277,18 @@ #define CONFIG_PHY1_ADDR 1 /* USB */ +#ifdef CONFIG_440EPX #define CONFIG_USB_OHCI #define CONFIG_USB_STORAGE /* Comment this out to enable USB 1.1 device */ #define USB_2_0_DEVICE +#define CMD_USB CFG_CMD_USB +#else +#define CMD_USB 0 /* no USB on 440GRx */ +#endif /* CONFIG_440EPX */ + /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -301,7 +312,7 @@ CFG_CMD_PING | \ CFG_CMD_REGINFO | \ CFG_CMD_SDRAM | \ - CFG_CMD_USB ) + CMD_USB) #define CONFIG_SUPPORT_VFAT -- cgit v1.2.3