From ac5faaaa0d3bcc9c089fddb210d6049f75b8adad Mon Sep 17 00:00:00 2001 From: Ahmad Fatoum Date: Fri, 31 Jul 2020 06:59:05 +0200 Subject: ARM: stm32mp: add support for Seeed Odyssey board Board consists of SoM with stm32mp157c with 4G eMMC and 512M DDR3 RAM. Carrier board features USB and ETH interfaces and SD card connector. USB and ETH interfaces not yet operational. Boot from eMMC requires boot ack bit set. Device Tree taken from v5 of kernel device tree off mailing list[1]. [1]: https://lore.kernel.org/linux-arm-kernel/20200724145107.35772-3-marcin.sloniewski@gmail.com/ Tested-by: Jookia Tested-by: Xogium Signed-off-by: Ahmad Fatoum Signed-off-by: Sascha Hauer --- Documentation/boards/stm32mp.rst | 1 + arch/arm/boards/Makefile | 1 + arch/arm/boards/seeed-odyssey/Makefile | 2 + arch/arm/boards/seeed-odyssey/board.c | 32 ++++ arch/arm/boards/seeed-odyssey/lowlevel.c | 19 ++ arch/arm/configs/stm32mp_defconfig | 1 + arch/arm/dts/Makefile | 1 + arch/arm/dts/stm32mp157c-odyssey-som.dtsi | 294 ++++++++++++++++++++++++++++++ arch/arm/dts/stm32mp157c-odyssey.dts | 27 +++ arch/arm/dts/stm32mp157c-odyssey.dtsi | 72 ++++++++ arch/arm/mach-stm32mp/Kconfig | 4 + images/Makefile.stm32mp | 5 + 12 files changed, 459 insertions(+) create mode 100644 arch/arm/boards/seeed-odyssey/Makefile create mode 100644 arch/arm/boards/seeed-odyssey/board.c create mode 100644 arch/arm/boards/seeed-odyssey/lowlevel.c create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dtsi diff --git a/Documentation/boards/stm32mp.rst b/Documentation/boards/stm32mp.rst index 607c59fd07..7c657eb990 100644 --- a/Documentation/boards/stm32mp.rst +++ b/Documentation/boards/stm32mp.rst @@ -31,6 +31,7 @@ The resulting images will be placed under ``images/``: barebox-stm32mp157c-dk2.img barebox-stm32mp157c-lxa-mc1.img + barebox-stm32mp157c-seeed-odyssey.img Flashing barebox diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile index 304ae59851..729faddec9 100644 --- a/arch/arm/boards/Makefile +++ b/arch/arm/boards/Makefile @@ -123,6 +123,7 @@ obj-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += microchip-ksz9477-evb/ obj-$(CONFIG_MACH_SAMA5D4_XPLAINED) += sama5d4_xplained/ obj-$(CONFIG_MACH_SAMA5D4EK) += sama5d4ek/ obj-$(CONFIG_MACH_SCB9328) += scb9328/ +obj-$(CONFIG_MACH_SEEED_ODYSSEY) += seeed-odyssey/ obj-$(CONFIG_MACH_SOCFPGA_ALTERA_SOCDK) += altera-socdk/ obj-$(CONFIG_MACH_SOCFPGA_EBV_SOCRATES) += ebv-socrates/ obj-$(CONFIG_MACH_SOCFPGA_REFLEX_ACHILLES) += reflex-achilles/ diff --git a/arch/arm/boards/seeed-odyssey/Makefile b/arch/arm/boards/seeed-odyssey/Makefile new file mode 100644 index 0000000000..092c31d6b2 --- /dev/null +++ b/arch/arm/boards/seeed-odyssey/Makefile @@ -0,0 +1,2 @@ +lwl-y += lowlevel.o +obj-y += board.o diff --git a/arch/arm/boards/seeed-odyssey/board.c b/arch/arm/boards/seeed-odyssey/board.c new file mode 100644 index 0000000000..e3fe536873 --- /dev/null +++ b/arch/arm/boards/seeed-odyssey/board.c @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include +#include +#include +#include +#include +#include +#include + +static int odyssey_device_init(void) +{ + int flags; + int instance = bootsource_get_instance(); + + if (!of_machine_is_compatible("seeed,stm32mp157c-odyssey-som")) + return 0; + + flags = instance == 0 ? BBU_HANDLER_FLAG_DEFAULT : 0; + stm32mp_bbu_mmc_register_handler("sd", "/dev/mmc0.ssbl", flags); + + flags = instance == 1 ? BBU_HANDLER_FLAG_DEFAULT : 0; + stm32mp_bbu_mmc_register_handler("emmc", "/dev/mmc1.ssbl", flags); + + + if (instance == 0) + of_device_enable_path("/chosen/environment-sd"); + else + of_device_enable_path("/chosen/environment-emmc"); + + return 0; +} +device_initcall(odyssey_device_init); diff --git a/arch/arm/boards/seeed-odyssey/lowlevel.c b/arch/arm/boards/seeed-odyssey/lowlevel.c new file mode 100644 index 0000000000..5ab1639dfe --- /dev/null +++ b/arch/arm/boards/seeed-odyssey/lowlevel.c @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include +#include +#include + +extern char __dtb_z_stm32mp157c_odyssey_start[]; + +ENTRY_FUNCTION(start_stm32mp157c_seeed_odyssey, r0, r1, r2) +{ + void *fdt; + + stm32mp_cpu_lowlevel_init(); + + putc_ll('>'); + + fdt = __dtb_z_stm32mp157c_odyssey_start + get_runtime_offset(); + + stm32mp1_barebox_entry(fdt); +} diff --git a/arch/arm/configs/stm32mp_defconfig b/arch/arm/configs/stm32mp_defconfig index 4b902e1741..c98908debc 100644 --- a/arch/arm/configs/stm32mp_defconfig +++ b/arch/arm/configs/stm32mp_defconfig @@ -1,6 +1,7 @@ CONFIG_ARCH_STM32MP=y CONFIG_MACH_STM32MP157C_DK2=y CONFIG_MACH_LXA_MC1=y +CONFIG_MACH_SEEED_ODYSSEY=y CONFIG_THUMB2_BAREBOX=y CONFIG_ARM_BOARD_APPEND_ATAG=y CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 3cbf65078d..4d01bebf87 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -109,6 +109,7 @@ lwl-$(CONFIG_MACH_SOLIDRUN_CUBOX) += dove-cubox-bb.dtb.o lwl-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += imx6dl-hummingboard.dtb.o imx6q-hummingboard.dtb.o \ imx6dl-hummingboard2.dtb.o imx6q-hummingboard2.dtb.o \ imx6q-h100.dtb.o +lwl-$(CONFIG_MACH_SEEED_ODYSSEY) += stm32mp157c-odyssey.dtb.o lwl-$(CONFIG_MACH_STM32MP157C_DK2) += stm32mp157c-dk2.dtb.o lwl-$(CONFIG_MACH_LXA_MC1) += stm32mp157c-lxa-mc1.dtb.o lwl-$(CONFIG_MACH_SCB9328) += imx1-scb9328.dtb.o diff --git a/arch/arm/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/dts/stm32mp157c-odyssey-som.dtsi new file mode 100644 index 0000000000..1e5bd8bccb --- /dev/null +++ b/arch/arm/dts/stm32mp157c-odyssey-som.dtsi @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 Marcin Sloniewski . + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include +#include + +/ { + model = "Seeed Studio Odyssey-STM32MP157C SOM"; + compatible = "seeed,stm32mp157c-odyssey-som", "st,stm32mp157"; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + + led { + compatible = "gpio-leds"; + led-blue { + color = ; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = ; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = ; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = ; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = ; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = ; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = ; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = ; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = ; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = , ; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc2_d47_pins_a { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + }; +}; + +&sdmmc2_d47_sleep_pins_a { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + }; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + diff --git a/arch/arm/dts/stm32mp157c-odyssey.dts b/arch/arm/dts/stm32mp157c-odyssey.dts new file mode 100644 index 0000000000..0e395bdec9 --- /dev/null +++ b/arch/arm/dts/stm32mp157c-odyssey.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 Ahmad Fatoum, Pengutronix + */ + +#include "stm32mp157c-odyssey.dtsi" +#include "stm32mp151.dtsi" + +/ { + chosen { + environment-sd { + compatible = "barebox,environment"; + device-path = &sdmmc1, "partname:barebox-environment"; + status = "disabled"; + }; + + environment-emmc { + compatible = "barebox,environment"; + device-path = &sdmmc2, "partname:barebox-environment"; + status = "disabled"; + }; + }; +}; + +&phy0 { + reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/dts/stm32mp157c-odyssey.dtsi b/arch/arm/dts/stm32mp157c-odyssey.dtsi new file mode 100644 index 0000000000..85a4f313ae --- /dev/null +++ b/arch/arm/dts/stm32mp157c-odyssey.dtsi @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 Marcin Sloniewski . + */ + +/dts-v1/; + +#include "stm32mp157c-odyssey-som.dtsi" + +/ { + model = "Seeed Studio Odyssey-STM32MP157C Board"; + compatible = "seeed,stm32mp157c-odyssey", + "seeed,stm32mp157c-odyssey-som", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@7 { /* KSZ9031RN */ + reg = <7>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig index 6e816ef9d1..f064a38088 100644 --- a/arch/arm/mach-stm32mp/Kconfig +++ b/arch/arm/mach-stm32mp/Kconfig @@ -16,4 +16,8 @@ config MACH_LXA_MC1 select ARCH_STM32MP157 bool "Linux Automation MC-1 board" +config MACH_SEEED_ODYSSEY + select ARCH_STM32MP157 + bool "Seeed Studio Odyssey" + endif diff --git a/images/Makefile.stm32mp b/images/Makefile.stm32mp index 38872c9525..1330a7ef3d 100644 --- a/images/Makefile.stm32mp +++ b/images/Makefile.stm32mp @@ -22,3 +22,8 @@ pblb-$(CONFIG_MACH_LXA_MC1) += start_stm32mp157c_lxa_mc1 FILE_barebox-stm32mp157c-lxa-mc1.img = start_stm32mp157c_lxa_mc1.pblb.stm32 OPTS_start_stm32mp157c_lxa_mc1.pblb.stm32 = $(STM32MP1_OPTS) image-$(CONFIG_MACH_LXA_MC1) += barebox-stm32mp157c-lxa-mc1.img + +pblb-$(CONFIG_MACH_SEEED_ODYSSEY) += start_stm32mp157c_seeed_odyssey +FILE_barebox-stm32mp157c-seeed-odyssey.img = start_stm32mp157c_seeed_odyssey.pblb.stm32 +OPTS_start_stm32mp157c_seeed_odyssey.pblb.stm32 = $(STM32MP1_OPTS) +image-$(CONFIG_MACH_SEEED_ODYSSEY) += barebox-stm32mp157c-seeed-odyssey.img -- cgit v1.2.3