From e54923b76e345080b73f3ae7f508657e5c63a9eb Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 8 Jun 2022 09:15:32 +0200 Subject: dts: update to v5.19-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/arm/arm,corstone1000.yaml | 45 + dts/Bindings/arm/bcm/brcm,bcm4708.yaml | 10 +- dts/Bindings/arm/bcm/brcm,bcm63138.txt | 2 +- dts/Bindings/arm/bcm/brcm,bcmbca.yaml | 33 + dts/Bindings/arm/freescale/fsl,layerscape-dcfg.txt | 19 - dts/Bindings/arm/freescale/fsl,layerscape-scfg.txt | 19 - dts/Bindings/arm/fsl.yaml | 119 +- .../hisilicon/controller/hip04-bootwrapper.yaml | 5 +- dts/Bindings/arm/hpe,gxp.yaml | 27 + dts/Bindings/arm/intel,socfpga.yaml | 1 + dts/Bindings/arm/mediatek.yaml | 5 + dts/Bindings/arm/mediatek/mediatek,apmixedsys.txt | 35 - dts/Bindings/arm/mediatek/mediatek,infracfg.txt | 42 - dts/Bindings/arm/mediatek/mediatek,infracfg.yaml | 81 + dts/Bindings/arm/mediatek/mediatek,mmsys.yaml | 32 + .../arm/mediatek/mediatek,mt7622-pcie-mirror.yaml | 42 + dts/Bindings/arm/mediatek/mediatek,mt7622-wed.yaml | 50 + .../arm/mediatek/mediatek,mt8186-clock.yaml | 56 + .../arm/mediatek/mediatek,mt8186-sys-clock.yaml | 54 + dts/Bindings/arm/mediatek/mediatek,pericfg.yaml | 1 + dts/Bindings/arm/mediatek/mediatek,topckgen.txt | 35 - dts/Bindings/arm/msm/qcom,llcc.yaml | 2 + dts/Bindings/arm/omap/prcm.txt | 7 +- dts/Bindings/arm/qcom.yaml | 21 + dts/Bindings/arm/renesas.yaml | 20 + dts/Bindings/arm/rockchip.yaml | 23 +- dts/Bindings/arm/sp810.txt | 46 - dts/Bindings/arm/sp810.yaml | 80 + dts/Bindings/arm/spe-pmu.txt | 20 - dts/Bindings/arm/stm32/stm32.yaml | 63 +- dts/Bindings/arm/sunxi.yaml | 5 + dts/Bindings/arm/syna.txt | 4 - .../arm/tegra/nvidia,tegra-ccplex-cluster.yaml | 52 + dts/Bindings/arm/ux500.yaml | 5 + dts/Bindings/arm/vexpress-config.yaml | 285 ++ dts/Bindings/arm/vexpress-sysreg.txt | 103 - dts/Bindings/arm/vexpress-sysreg.yaml | 90 + dts/Bindings/ata/renesas,rcar-sata.yaml | 1 + dts/Bindings/bus/qcom,ssc-block-bus.yaml | 147 + dts/Bindings/clock/airoha,en7523-scu.yaml | 58 + dts/Bindings/clock/clock-bindings.txt | 188 +- dts/Bindings/clock/mediatek,apmixedsys.yaml | 61 + dts/Bindings/clock/mediatek,topckgen.yaml | 61 + dts/Bindings/clock/qcom,gcc-apq8064.yaml | 4 +- dts/Bindings/clock/qcom,gcc-apq8084.yaml | 42 + dts/Bindings/clock/qcom,gcc-sc8280xp.yaml | 128 + dts/Bindings/clock/qcom,mmcc.yaml | 2 +- dts/Bindings/clock/qcom,rpmcc.txt | 63 - dts/Bindings/clock/qcom,rpmcc.yaml | 75 + dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml | 172 + dts/Bindings/clock/renesas,cpg-mssr.yaml | 1 + dts/Bindings/clock/renesas,h8300-div-clock.txt | 24 - dts/Bindings/clock/renesas,h8s2678-pll-clock.txt | 23 - dts/Bindings/clock/renesas,r9a06g032-sysctrl.yaml | 11 + dts/Bindings/clock/renesas,rzg2l-cpg.yaml | 20 +- dts/Bindings/clock/rockchip,px30-cru.txt | 70 - dts/Bindings/clock/rockchip,px30-cru.yaml | 119 + dts/Bindings/clock/rockchip,rk3036-cru.txt | 56 - dts/Bindings/clock/rockchip,rk3036-cru.yaml | 72 + dts/Bindings/clock/rockchip,rk3188-cru.txt | 61 - dts/Bindings/clock/rockchip,rk3188-cru.yaml | 78 + dts/Bindings/clock/rockchip,rk3228-cru.txt | 58 - dts/Bindings/clock/rockchip,rk3228-cru.yaml | 74 + dts/Bindings/clock/rockchip,rk3288-cru.txt | 67 - dts/Bindings/clock/rockchip,rk3288-cru.yaml | 85 + dts/Bindings/clock/rockchip,rk3308-cru.txt | 60 - dts/Bindings/clock/rockchip,rk3308-cru.yaml | 76 + dts/Bindings/clock/rockchip,rk3368-cru.txt | 61 - dts/Bindings/clock/rockchip,rk3368-cru.yaml | 78 + dts/Bindings/clock/rockchip,rk3399-cru.yaml | 33 +- dts/Bindings/clock/rockchip,rk3568-cru.yaml | 13 + dts/Bindings/clock/rockchip,rv1108-cru.txt | 59 - dts/Bindings/clock/rockchip,rv1108-cru.yaml | 75 + .../clock/samsung,exynos4412-isp-clock.yaml | 1 - dts/Bindings/clock/samsung,exynosautov9-clock.yaml | 219 ++ dts/Bindings/clock/st,stm32mp1-rcc.yaml | 43 + dts/Bindings/clock/stericsson,u8500-clks.yaml | 57 + dts/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml | 1 + dts/Bindings/clock/ti-clkctrl.txt | 4 +- dts/Bindings/clock/ti/clockdomain.txt | 3 + dts/Bindings/clock/ti/composite.txt | 3 + dts/Bindings/clock/ti/fixed-factor-clock.txt | 1 + dts/Bindings/clock/ti/gate.txt | 1 + dts/Bindings/clock/ti/interface.txt | 1 + dts/Bindings/clock/ti/mux.txt | 1 + dts/Bindings/cpufreq/cpufreq-mediatek.txt | 7 + dts/Bindings/crypto/allwinner,sun8i-ce.yaml | 1 - dts/Bindings/crypto/ti,sa2ul.yaml | 1 + dts/Bindings/devfreq/rk3399_dmc.txt | 212 -- .../allwinner,sun4i-a10-display-engine.yaml | 1 + dts/Bindings/display/allwinner,sun4i-a10-tcon.yaml | 2 + .../display/allwinner,sun8i-a83t-de2-mixer.yaml | 2 + .../display/allwinner,sun8i-r40-tcon-top.yaml | 133 +- dts/Bindings/display/amlogic,meson-dw-hdmi.yaml | 1 - dts/Bindings/display/arm,hdlcd.txt | 79 - dts/Bindings/display/arm,hdlcd.yaml | 89 + dts/Bindings/display/arm,komeda.txt | 78 - dts/Bindings/display/arm,komeda.yaml | 130 + dts/Bindings/display/arm,malidp.txt | 68 - dts/Bindings/display/arm,malidp.yaml | 124 + dts/Bindings/display/arm,pl11x.txt | 110 - dts/Bindings/display/arm,pl11x.yaml | 183 + dts/Bindings/display/bridge/chipone,icn6211.yaml | 18 +- dts/Bindings/display/bridge/fsl,ldb.yaml | 92 + .../display/bridge/google,cros-ec-anx7688.yaml | 1 - dts/Bindings/display/bridge/ite,it66121.yaml | 3 + dts/Bindings/display/bridge/lontium,lt9211.yaml | 117 + dts/Bindings/display/bridge/ps8640.yaml | 1 - dts/Bindings/display/bridge/toshiba,tc358767.yaml | 22 +- dts/Bindings/display/bridge/toshiba,tc358768.yaml | 1 + dts/Bindings/display/imx/nxp,imx8mq-dcss.yaml | 1 - dts/Bindings/display/mediatek/mediatek,aal.yaml | 11 +- dts/Bindings/display/mediatek/mediatek,ccorr.yaml | 5 +- dts/Bindings/display/mediatek/mediatek,color.yaml | 7 +- dts/Bindings/display/mediatek/mediatek,dither.yaml | 4 +- dts/Bindings/display/mediatek/mediatek,dpi.yaml | 1 + dts/Bindings/display/mediatek/mediatek,gamma.yaml | 4 +- dts/Bindings/display/mediatek/mediatek,merge.yaml | 1 - dts/Bindings/display/mediatek/mediatek,mutex.yaml | 25 +- dts/Bindings/display/mediatek/mediatek,ovl-2l.yaml | 4 + dts/Bindings/display/mediatek/mediatek,ovl.yaml | 8 +- .../display/mediatek/mediatek,postmask.yaml | 4 + dts/Bindings/display/mediatek/mediatek,rdma.yaml | 7 +- dts/Bindings/display/msm/dpu-qcm2290.yaml | 4 + dts/Bindings/display/msm/dpu-sc7180.yaml | 4 + dts/Bindings/display/msm/dpu-sc7280.yaml | 4 + dts/Bindings/display/msm/dpu-sdm845.yaml | 4 + dts/Bindings/display/panel/ilitek,ili9341.yaml | 1 - .../display/panel/leadtek,ltk035c5444t.yaml | 59 + dts/Bindings/display/panel/orisetech,otm8009a.yaml | 1 - dts/Bindings/display/panel/panel-simple.yaml | 4 + dts/Bindings/display/panel/panel-timing.yaml | 5 + dts/Bindings/display/panel/raydium,rm67191.yaml | 1 + dts/Bindings/display/panel/samsung,s6e8aa0.yaml | 1 + .../display/rockchip/rockchip,dw-hdmi.yaml | 46 +- dts/Bindings/display/rockchip/rockchip-vop2.yaml | 146 + dts/Bindings/display/sitronix,st7735r.yaml | 6 +- dts/Bindings/display/solomon,ssd1307fb.yaml | 95 +- .../display/sprd/sprd,display-subsystem.yaml | 1 - dts/Bindings/display/st,stm32-ltdc.yaml | 1 - dts/Bindings/dma/allwinner,sun50i-a64-dma.yaml | 9 +- dts/Bindings/dma/altr,msgdma.yaml | 2 +- dts/Bindings/dma/arm,pl330.yaml | 3 + dts/Bindings/dma/fsl-imx-dma.txt | 8 +- dts/Bindings/dma/mmp-dma.txt | 10 +- dts/Bindings/dma/nvidia,tegra186-gpc-dma.yaml | 110 + dts/Bindings/dma/qcom,gpi.yaml | 3 + dts/Bindings/dma/renesas,rcar-dmac.yaml | 10 +- dts/Bindings/dma/renesas,rzn1-dmamux.yaml | 51 + dts/Bindings/dma/sifive,fu540-c000-pdma.yaml | 19 +- dts/Bindings/dma/snps,dma-spear1340.yaml | 8 +- dts/Bindings/dma/sprd-dma.txt | 7 +- dts/Bindings/dma/st,stm32-dmamux.yaml | 1 - dts/Bindings/dma/st,stm32-mdma.yaml | 1 - dts/Bindings/dma/xilinx/xilinx_dma.txt | 6 +- dts/Bindings/dsp/mediatek,mt8195-dsp.yaml | 105 + dts/Bindings/eeprom/at24.txt | 1 - dts/Bindings/eeprom/at24.yaml | 4 +- dts/Bindings/example-schema.yaml | 14 +- dts/Bindings/extcon/siliconmitus,sm5502-muic.yaml | 5 +- dts/Bindings/firmware/qcom,scm.txt | 3 +- dts/Bindings/gnss/brcm,bcm4751.yaml | 69 + dts/Bindings/gnss/mediatek.txt | 35 - dts/Bindings/gnss/mediatek.yaml | 59 + dts/Bindings/gpio/fairchild,74hc595.yaml | 1 + dts/Bindings/gpio/gpio-altera.txt | 5 +- dts/Bindings/gpio/gpio-consumer-common.yaml | 64 + dts/Bindings/gpio/gpio-pca95xx.yaml | 1 + dts/Bindings/gpio/realtek,otto-gpio.yaml | 34 +- dts/Bindings/gpio/renesas,rcar-gpio.yaml | 5 + dts/Bindings/gpio/socionext,uniphier-gpio.yaml | 17 + dts/Bindings/gpu/samsung-rotator.yaml | 1 - dts/Bindings/h8300/cpu.txt | 13 - dts/Bindings/hwmon/adt7475.yaml | 23 +- dts/Bindings/hwmon/lm75.yaml | 1 + dts/Bindings/hwmon/microchip,lan966x.yaml | 53 + dts/Bindings/hwmon/national,lm90.yaml | 20 + dts/Bindings/hwmon/nuvoton,nct6775.yaml | 57 + dts/Bindings/hwmon/ti,tmp401.yaml | 105 + dts/Bindings/i2c/i2c-gate.yaml | 1 - dts/Bindings/i2c/i2c-mt65xx.txt | 53 - dts/Bindings/i2c/i2c-mt65xx.yaml | 118 + dts/Bindings/i2c/i2c-mux-gpmux.yaml | 1 - dts/Bindings/i2c/qcom,i2c-geni-qcom.yaml | 100 + dts/Bindings/i2c/qcom,i2c-qup.txt | 40 - dts/Bindings/i2c/qcom,i2c-qup.yaml | 89 + dts/Bindings/i2c/renesas,rcar-i2c.yaml | 2 +- dts/Bindings/i2c/renesas,riic.yaml | 2 + dts/Bindings/i2c/samsung,s3c2410-i2c.yaml | 2 +- dts/Bindings/i3c/cdns,i3c-master.txt | 43 - dts/Bindings/i3c/cdns,i3c-master.yaml | 60 + dts/Bindings/i3c/snps,dw-i3c-master.txt | 41 - dts/Bindings/i3c/snps,dw-i3c-master.yaml | 52 + dts/Bindings/iio/adc/adi,ad7291.yaml | 1 - dts/Bindings/iio/adc/renesas,rzg2l-adc.yaml | 3 +- dts/Bindings/iio/adc/sprd,sc2720-adc.yaml | 60 +- dts/Bindings/iio/adc/ti,ads1015.yaml | 7 +- dts/Bindings/iio/dac/adi,ad3552r.yaml | 2 +- dts/Bindings/iio/dac/lltc,ltc1660.yaml | 2 +- dts/Bindings/iio/dac/lltc,ltc2632.yaml | 2 +- dts/Bindings/iio/imu/invensense,mpu6050.yaml | 34 +- dts/Bindings/iio/imu/st,lsm6dsx.yaml | 38 +- dts/Bindings/iio/light/stk33xx.yaml | 6 + .../iio/potentiometer/microchip,mcp4131.yaml | 2 +- dts/Bindings/iio/st,st-sensors.yaml | 1 + .../input/allwinner,sun4i-a10-lradc-keys.yaml | 22 + dts/Bindings/input/azoteq,iqs7222.yaml | 960 +++++ dts/Bindings/input/google,cros-ec-keyb.yaml | 37 +- dts/Bindings/input/ilitek,ili2xxx.txt | 27 - dts/Bindings/input/touchscreen/ilitek_ts_i2c.yaml | 7 +- dts/Bindings/interconnect/qcom,bcm-voter.yaml | 8 +- dts/Bindings/interconnect/qcom,osm-l3.yaml | 2 +- dts/Bindings/interconnect/qcom,rpmh.yaml | 18 +- dts/Bindings/interrupt-controller/arm,gic-v3.yaml | 8 +- .../interrupt-controller/fsl,ls-extirq.txt | 53 - .../interrupt-controller/fsl,ls-extirq.yaml | 118 + dts/Bindings/interrupt-controller/qcom,pdc.txt | 6 +- .../interrupt-controller/renesas,h8300h-intc.txt | 22 - .../interrupt-controller/renesas,h8s-intc.txt | 22 - dts/Bindings/iommu/apple,sart.yaml | 52 + dts/Bindings/iommu/arm,smmu-v3.yaml | 16 +- dts/Bindings/iommu/arm,smmu.yaml | 25 +- dts/Bindings/iommu/mediatek,iommu.yaml | 34 +- dts/Bindings/iommu/samsung,sysmmu.yaml | 11 - dts/Bindings/leds/backlight/qcom-wled.yaml | 2 +- dts/Bindings/leds/kinetic,ktd2692.yaml | 87 + dts/Bindings/leds/leds-class-multicolor.yaml | 2 +- dts/Bindings/leds/leds-ktd2692.txt | 50 - dts/Bindings/leds/leds-mt6360.yaml | 2 +- dts/Bindings/leds/leds-pwm-multicolor.yaml | 79 + dts/Bindings/leds/leds-qcom-lpg.yaml | 174 + dts/Bindings/leds/regulator-led.yaml | 55 + dts/Bindings/mailbox/amlogic,meson-gxbb-mhu.yaml | 1 - dts/Bindings/mailbox/mtk,adsp-mbox.yaml | 7 +- dts/Bindings/mailbox/nvidia,tegra186-hsp.yaml | 9 + dts/Bindings/mailbox/qcom-ipcc.yaml | 30 +- dts/Bindings/mailbox/st,stm32-ipcc.yaml | 11 +- dts/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt | 127 - dts/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml | 140 + dts/Bindings/media/i2c/adv7604.yaml | 3 +- dts/Bindings/media/i2c/dongwoon,dw9807-vcm.txt | 9 - dts/Bindings/media/i2c/dongwoon,dw9807-vcm.yaml | 41 + dts/Bindings/media/i2c/sony,imx412.yaml | 9 + dts/Bindings/media/mediatek,vcodec-encoder.yaml | 3 + .../media/mediatek,vcodec-subdev-decoder.yaml | 4 +- dts/Bindings/media/microchip,xisc.yaml | 3 +- dts/Bindings/media/rockchip,vdec.yaml | 4 +- dts/Bindings/media/rockchip-vpu.yaml | 1 + dts/Bindings/media/video-interfaces.yaml | 1 + dts/Bindings/memory-controllers/fsl/fsl,ddr.yaml | 6 - .../ingenic,nemc-peripherals.yaml | 46 + dts/Bindings/memory-controllers/ingenic,nemc.yaml | 32 - .../memory-controllers/nvidia,tegra186-mc.yaml | 80 +- .../memory-controllers/renesas,h8300-bsc.yaml | 35 - .../memory-controllers/renesas,rpc-if.yaml | 6 + .../memory-controllers/rockchip,rk3399-dmc.yaml | 384 ++ dts/Bindings/mfd/da9063.txt | 9 +- dts/Bindings/mfd/google,cros-ec.yaml | 2 +- dts/Bindings/mfd/mediatek,mt6360.yaml | 256 ++ dts/Bindings/mfd/qcom,spmi-pmic.txt | 2 +- dts/Bindings/mfd/rk808.txt | 465 --- dts/Bindings/mfd/rockchip,rk805.yaml | 219 ++ dts/Bindings/mfd/rockchip,rk808.yaml | 257 ++ dts/Bindings/mfd/rockchip,rk809.yaml | 284 ++ dts/Bindings/mfd/rockchip,rk817.yaml | 330 ++ dts/Bindings/mfd/rockchip,rk818.yaml | 282 ++ dts/Bindings/mfd/samsung,exynos5433-lpass.yaml | 4 +- dts/Bindings/mfd/syscon.yaml | 8 - dts/Bindings/mfd/wlf,arizona.yaml | 1 + dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml | 20 +- dts/Bindings/mmc/fsl-imx-esdhc.yaml | 31 +- dts/Bindings/mmc/marvell,dove-sdhci.yaml | 44 + dts/Bindings/mmc/marvell,orion-sdio.yaml | 44 + dts/Bindings/mmc/marvell,xenon-sdhci.txt | 173 - dts/Bindings/mmc/marvell,xenon-sdhci.yaml | 275 ++ dts/Bindings/mmc/mmc-controller.yaml | 5 +- dts/Bindings/mmc/mtk-sd.yaml | 15 +- dts/Bindings/mmc/orion-sdio.txt | 16 - dts/Bindings/mmc/sdhci-am654.yaml | 7 + dts/Bindings/mmc/sdhci-dove.txt | 14 - dts/Bindings/mmc/sdhci-msm.txt | 123 - dts/Bindings/mmc/sdhci-msm.yaml | 194 + dts/Bindings/mmc/snps,dwcmshc-sdhci.yaml | 1 + dts/Bindings/mtd/aspeed-smc.txt | 51 - dts/Bindings/mtd/common.txt | 1 - dts/Bindings/mtd/elm.txt | 16 - dts/Bindings/mtd/hisilicon,fmc-spi-nor.txt | 2 +- dts/Bindings/mtd/ingenic,nand.yaml | 1 + dts/Bindings/mtd/jedec,spi-nor.yaml | 8 - dts/Bindings/mtd/partitions/fixed-partitions.yaml | 55 +- dts/Bindings/mtd/renesas-nandc.yaml | 5 + dts/Bindings/mtd/spi-nand.yaml | 1 + dts/Bindings/mtd/ti,elm.yaml | 72 + dts/Bindings/mux/reg-mux.yaml | 9 +- dts/Bindings/net/adi,adin.yaml | 18 +- dts/Bindings/net/asix,ax88178.yaml | 68 + dts/Bindings/net/aspeed,ast2600-mdio.yaml | 6 + dts/Bindings/net/can/ctu,ctucanfd.yaml | 66 + dts/Bindings/net/can/microchip,mcp251xfd.yaml | 19 +- dts/Bindings/net/can/renesas,rcar-canfd.yaml | 5 +- dts/Bindings/net/cdns,macb.yaml | 10 +- dts/Bindings/net/dsa/brcm,b53.yaml | 115 +- dts/Bindings/net/dsa/microchip,ksz.yaml | 1 + dts/Bindings/net/dsa/nxp,sja1105.yaml | 1 + dts/Bindings/net/dsa/realtek.yaml | 1 + dts/Bindings/net/ethernet-phy.yaml | 9 + dts/Bindings/net/ingenic,mac.yaml | 1 + dts/Bindings/net/marvell,orion-mdio.yaml | 60 + dts/Bindings/net/marvell-orion-mdio.txt | 54 - dts/Bindings/net/mediatek,net.yaml | 437 +++ dts/Bindings/net/mediatek-dwmac.yaml | 3 + dts/Bindings/net/mediatek-net.txt | 98 - dts/Bindings/net/micrel.txt | 9 + dts/Bindings/net/microchip,lan95xx.yaml | 63 + dts/Bindings/net/microchip,lan966x-switch.yaml | 8 +- dts/Bindings/net/mscc,miim.yaml | 61 + dts/Bindings/net/mscc-miim.txt | 26 - dts/Bindings/net/qcom,ipa.yaml | 7 + dts/Bindings/net/renesas,etheravb.yaml | 82 +- dts/Bindings/net/smsc,lan91c111.yaml | 61 + dts/Bindings/net/smsc-lan91c111.txt | 17 - dts/Bindings/net/sunplus,sp7021-emac.yaml | 141 + dts/Bindings/net/ti,davinci-mdio.yaml | 1 + dts/Bindings/net/ti,k3-am654-cpts.yaml | 1 - dts/Bindings/net/toshiba,visconti-dwmac.yaml | 3 +- dts/Bindings/net/wireless/mediatek,mt76.yaml | 2 +- dts/Bindings/net/wireless/qcom,ath11k.yaml | 363 +- dts/Bindings/net/wireless/silabs,wfx.yaml | 138 + dts/Bindings/net/wireless/ti,wlcore.yaml | 2 + dts/Bindings/nvme/apple,nvme-ans.yaml | 111 + dts/Bindings/nvmem/apple,efuses.yaml | 50 + dts/Bindings/nvmem/fsl,layerscape-sfp.yaml | 30 +- dts/Bindings/nvmem/snvs-lpgpr.yaml | 4 + dts/Bindings/opp/opp-v2-kryo-cpu.yaml | 56 +- dts/Bindings/pci/apple,pcie.yaml | 5 +- dts/Bindings/pci/layerscape-pci.txt | 65 +- dts/Bindings/pci/qcom,pcie.txt | 397 -- dts/Bindings/pci/qcom,pcie.yaml | 714 ++++ dts/Bindings/pci/rockchip-dw-pcie.yaml | 12 +- dts/Bindings/pci/snps,dw-pcie-ep.yaml | 6 +- dts/Bindings/pci/snps,dw-pcie.yaml | 2 + dts/Bindings/pci/socionext,uniphier-pcie.yaml | 117 + dts/Bindings/pci/uniphier-pcie.txt | 82 - dts/Bindings/pci/xilinx-versal-cpm.yaml | 10 +- dts/Bindings/perf/arm,cmn.yaml | 2 + dts/Bindings/perf/spe-pmu.yaml | 40 + .../phy/allwinner,sun6i-a31-mipi-dphy.yaml | 12 + dts/Bindings/phy/marvell,armada-3700-utmi-phy.yaml | 2 +- dts/Bindings/phy/mixel,mipi-dsi-phy.txt | 29 - dts/Bindings/phy/mixel,mipi-dsi-phy.yaml | 107 + dts/Bindings/phy/qcom,qmp-phy.yaml | 4 + dts/Bindings/phy/renesas,usb2-phy.yaml | 1 + dts/Bindings/phy/socionext,uniphier-ahci-phy.yaml | 91 +- dts/Bindings/phy/socionext,uniphier-pcie-phy.yaml | 47 +- dts/Bindings/phy/socionext,uniphier-usb2-phy.yaml | 3 + .../phy/socionext,uniphier-usb3hs-phy.yaml | 89 +- .../phy/socionext,uniphier-usb3ss-phy.yaml | 98 +- dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 81 +- dts/Bindings/pinctrl/canaan,k210-fpioa.yaml | 2 + dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt | 87 - dts/Bindings/pinctrl/fsl,imx7d-pinctrl.yaml | 113 + dts/Bindings/pinctrl/fsl,imxrt1170.yaml | 77 + dts/Bindings/pinctrl/marvell,ac5-pinctrl.yaml | 72 + dts/Bindings/pinctrl/mediatek,pinctrl-mt6795.yaml | 224 ++ dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt | 42 - dts/Bindings/pinctrl/mscc,ocelot-pinctrl.yaml | 116 + dts/Bindings/pinctrl/pinctrl-mt8192.yaml | 155 +- dts/Bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml | 133 - dts/Bindings/pinctrl/qcom,pmic-gpio.yaml | 287 +- dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml | 3 +- .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 115 + dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml | 3 +- dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 3 +- .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 133 + dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 3 +- dts/Bindings/pinctrl/qcom,tlmm-common.yaml | 1 - dts/Bindings/pinctrl/ralink,mt7620-pinctrl.yaml | 91 + dts/Bindings/pinctrl/ralink,mt7621-pinctrl.yaml | 71 + dts/Bindings/pinctrl/ralink,rt2880-pinctrl.yaml | 68 + dts/Bindings/pinctrl/ralink,rt2880-pinmux.yaml | 68 - dts/Bindings/pinctrl/ralink,rt305x-pinctrl.yaml | 92 + dts/Bindings/pinctrl/ralink,rt3883-pinctrl.yaml | 71 + dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 5 +- dts/Bindings/pinctrl/rockchip,pinctrl.yaml | 4 +- dts/Bindings/power/amlogic,meson-sec-pwrc.yaml | 1 - dts/Bindings/power/avs/qcom,cpr.yaml | 1 + dts/Bindings/power/qcom,rpmpd.yaml | 3 + dts/Bindings/power/renesas,rcar-sysc.yaml | 16 +- dts/Bindings/power/renesas,rzg2l-sysc.yaml | 64 - dts/Bindings/power/supply/battery.yaml | 7 +- dts/Bindings/power/supply/charger-manager.yaml | 1 + dts/Bindings/power/supply/cw2015_battery.yaml | 1 - dts/Bindings/power/supply/power-supply.yaml | 1 - dts/Bindings/power/supply/ti,lp8727.yaml | 1 - dts/Bindings/power/supply/tps65217-charger.yaml | 2 +- dts/Bindings/powerpc/fsl/cache_sram.txt | 20 - dts/Bindings/powerpc/fsl/l2cache.txt | 6 - dts/Bindings/pwm/atmel,at91sam-pwm.yaml | 47 + dts/Bindings/pwm/atmel-pwm.txt | 35 - dts/Bindings/pwm/google,cros-ec-pwm.yaml | 9 +- dts/Bindings/pwm/mediatek,pwm-disp.yaml | 75 + dts/Bindings/pwm/pwm-mediatek.txt | 1 + dts/Bindings/pwm/pwm-mtk-disp.txt | 45 - dts/Bindings/pwm/pwm-omap-dmtimer.txt | 2 +- dts/Bindings/pwm/sunplus,sp7021-pwm.yaml | 42 + dts/Bindings/regulator/mt6315-regulator.yaml | 6 +- dts/Bindings/regulator/mt6358-regulator.txt | 22 +- dts/Bindings/regulator/nxp,pca9450-regulator.yaml | 11 + dts/Bindings/regulator/qcom,rpmh-regulator.yaml | 262 +- dts/Bindings/regulator/qcom,smd-rpm-regulator.yaml | 5 +- .../regulator/richtek,rt4801-regulator.yaml | 21 +- .../regulator/richtek,rt5759-regulator.yaml | 90 + .../regulator/siliconmitus,sm5703-regulator.yaml | 49 + .../regulator/socionext,uniphier-regulator.yaml | 58 +- dts/Bindings/regulator/st,stm32-vrefbuf.yaml | 1 - dts/Bindings/remoteproc/fsl,imx-rproc.yaml | 9 +- dts/Bindings/remoteproc/mtk,scp.yaml | 57 +- dts/Bindings/remoteproc/qcom,adsp.yaml | 31 + dts/Bindings/remoteproc/qcom,q6v5.txt | 2 +- dts/Bindings/remoteproc/qcom,wcnss-pil.txt | 2 +- dts/Bindings/remoteproc/st,stm32-rproc.yaml | 16 +- dts/Bindings/reserved-memory/phram.yaml | 47 + dts/Bindings/reserved-memory/ramoops.yaml | 1 - dts/Bindings/reset/altr,rst-mgr.yaml | 47 + dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt | 22 - .../reset/amlogic,meson-axg-audio-arb.yaml | 56 + dts/Bindings/reset/amlogic,meson-reset.yaml | 1 + dts/Bindings/reset/ath79-reset.txt | 20 - dts/Bindings/reset/berlin,reset.txt | 23 - dts/Bindings/reset/bitmain,bm1880-reset.txt | 18 - dts/Bindings/reset/bitmain,bm1880-reset.yaml | 36 + dts/Bindings/reset/hisilicon,hi6220-reset.txt | 37 - dts/Bindings/reset/lantiq,reset.txt | 30 - dts/Bindings/reset/lantiq,reset.yaml | 49 + dts/Bindings/reset/marvell,berlin2-reset.yaml | 38 + dts/Bindings/reset/microchip,rst.yaml | 1 - dts/Bindings/reset/nuvoton,npcm-reset.txt | 32 - dts/Bindings/reset/nuvoton,npcm750-reset.yaml | 50 + dts/Bindings/reset/qca,ar7100-reset.yaml | 40 + dts/Bindings/reset/qcom,aoss-reset.yaml | 2 +- dts/Bindings/reset/qcom,pdc-global.yaml | 2 +- dts/Bindings/reset/renesas,rst.yaml | 1 + dts/Bindings/reset/snps,axs10x-reset.txt | 33 - dts/Bindings/reset/snps,axs10x-reset.yaml | 48 + dts/Bindings/reset/socfpga-reset.txt | 16 - .../reset/socionext,uniphier-glue-reset.yaml | 52 +- dts/Bindings/reset/st,sti-picophyreset.txt | 42 - dts/Bindings/reset/st,sti-powerdown.txt | 45 - dts/Bindings/reset/st,stih407-picophyreset.yaml | 47 + dts/Bindings/reset/st,stih407-powerdown.yaml | 49 + dts/Bindings/riscv/microchip.yaml | 2 + dts/Bindings/rng/intel,ixp46x-rng.yaml | 1 - dts/Bindings/rng/st,stm32-rng.yaml | 1 + dts/Bindings/rtc/nxp,pcf85063.txt | 1 + dts/Bindings/rtc/renesas,rzn1-rtc.yaml | 70 + dts/Bindings/rtc/rtc.txt | 1 - dts/Bindings/serial/8250.yaml | 1 + dts/Bindings/serial/fsl-lpuart.yaml | 4 +- dts/Bindings/serial/qcom,msm-uartdm.txt | 81 - dts/Bindings/serial/qcom,msm-uartdm.yaml | 112 + dts/Bindings/serial/qcom,serial-geni-qcom.yaml | 86 + dts/Bindings/serial/renesas,em-uart.yaml | 37 +- dts/Bindings/serial/renesas,hscif.yaml | 9 +- dts/Bindings/serial/renesas,scif.yaml | 2 +- dts/Bindings/serial/rs485.yaml | 5 + dts/Bindings/serial/socionext,uniphier-uart.yaml | 5 +- dts/Bindings/serial/sprd-uart.yaml | 2 +- dts/Bindings/serio/arm,pl050.yaml | 67 + dts/Bindings/soc/amlogic/amlogic,canvas.yaml | 1 - dts/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml | 68 + dts/Bindings/soc/fsl/fsl,layerscape-scfg.yaml | 58 + dts/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml | 84 + .../soc/imx/fsl,imx8mp-media-blk-ctrl.yaml | 104 + dts/Bindings/soc/intel/intel,hps-copy-engine.yaml | 51 + dts/Bindings/soc/mediatek/pwrap.txt | 10 +- dts/Bindings/soc/qcom/qcom,geni-se.yaml | 102 +- dts/Bindings/soc/qcom/qcom,gsbi.txt | 87 - dts/Bindings/soc/qcom/qcom,gsbi.yaml | 132 + dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml | 272 ++ dts/Bindings/soc/qcom/qcom,smd-rpm.yaml | 12 +- dts/Bindings/soc/qcom/qcom,smd.txt | 98 - dts/Bindings/soc/qcom/qcom,smd.yaml | 135 + dts/Bindings/soc/qcom/qcom,smp2p.txt | 110 - dts/Bindings/soc/qcom/qcom,smp2p.yaml | 145 + dts/Bindings/soc/qcom/qcom,smsm.txt | 104 - dts/Bindings/soc/qcom/qcom,smsm.yaml | 138 + dts/Bindings/soc/qcom/qcom,wcnss.txt | 131 - dts/Bindings/soc/qcom/qcom,wcnss.yaml | 137 + dts/Bindings/soc/qcom/rpmh-rsc.txt | 137 - dts/Bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 65 + dts/Bindings/soc/rockchip/grf.yaml | 3 + dts/Bindings/soc/samsung/exynos-usi.yaml | 2 +- dts/Bindings/soc/ti/wkup-m3-ipc.yaml | 175 + dts/Bindings/soc/ti/wkup_m3_ipc.txt | 57 - dts/Bindings/sound/adi,adau1372.yaml | 1 - dts/Bindings/sound/adi,max98396.yaml | 79 + dts/Bindings/sound/amlogic,gx-sound-card.yaml | 1 - dts/Bindings/sound/arm,pl041.yaml | 62 + dts/Bindings/sound/audio-graph-card2.yaml | 3 + dts/Bindings/sound/cirrus,cs35l41.yaml | 44 +- dts/Bindings/sound/cirrus,cs35l45.yaml | 75 + dts/Bindings/sound/fsl,micfil.txt | 1 + dts/Bindings/sound/imx-audio-hdmi.yaml | 3 + dts/Bindings/sound/maxim,max98390.yaml | 5 + dts/Bindings/sound/maxim,max98520.yaml | 1 - dts/Bindings/sound/mchp,spdifrx.yaml | 2 +- dts/Bindings/sound/mchp,spdiftx.yaml | 2 +- .../sound/mt8192-mt6359-rt1015-rt5682.yaml | 32 + .../sound/mt8195-mt6359-rt1011-rt5682.yaml | 51 - .../sound/mt8195-mt6359-rt1019-rt5682.yaml | 61 - dts/Bindings/sound/mt8195-mt6359.yaml | 64 + dts/Bindings/sound/nvidia,tegra-audio-rt5640.yaml | 1 - dts/Bindings/sound/nvidia,tegra186-asrc.yaml | 81 + dts/Bindings/sound/nvidia,tegra210-ahub.yaml | 4 + dts/Bindings/sound/qcom,lpass-cpu.yaml | 17 +- dts/Bindings/sound/qcom,lpass-rx-macro.yaml | 17 +- dts/Bindings/sound/qcom,lpass-tx-macro.yaml | 17 +- dts/Bindings/sound/qcom,lpass-va-macro.yaml | 11 +- dts/Bindings/sound/qcom,wcd938x.yaml | 3 + dts/Bindings/sound/realtek,rt1015p.yaml | 3 + dts/Bindings/sound/rt5682.txt | 2 + dts/Bindings/sound/samsung,aries-wm8994.yaml | 1 - dts/Bindings/sound/samsung,odroid.yaml | 1 - dts/Bindings/sound/serial-midi.yaml | 51 + dts/Bindings/sound/tas2562.yaml | 1 - dts/Bindings/sound/tas2764.yaml | 76 - dts/Bindings/sound/tas2770.yaml | 1 - dts/Bindings/sound/tas27xx.yaml | 77 + dts/Bindings/sound/wlf,wm8731.yaml | 97 + dts/Bindings/sound/wlf,wm8940.yaml | 57 + dts/Bindings/sound/wm8731.txt | 27 - dts/Bindings/soundwire/qcom,sdw.txt | 14 + dts/Bindings/spi/allwinner,sun6i-a31-spi.yaml | 1 + dts/Bindings/spi/amlogic,meson-gx-spicc.yaml | 1 - dts/Bindings/spi/amlogic,meson6-spifc.yaml | 1 - dts/Bindings/spi/aspeed,ast2600-fmc.yaml | 82 + dts/Bindings/spi/ingenic,spi.yaml | 3 + dts/Bindings/spi/mediatek,spi-mt65xx.yaml | 4 + dts/Bindings/spi/mediatek,spi-mtk-snfi.yaml | 88 + dts/Bindings/spi/qcom,spi-geni-qcom.txt | 39 - dts/Bindings/spi/qcom,spi-geni-qcom.yaml | 116 + dts/Bindings/spi/qcom,spi-qcom-qspi.yaml | 4 +- dts/Bindings/spi/qcom,spi-qup.txt | 103 - dts/Bindings/spi/qcom,spi-qup.yaml | 81 + dts/Bindings/spi/renesas,hspi.yaml | 1 - dts/Bindings/spi/renesas,rspi.yaml | 2 + dts/Bindings/spi/spi-davinci.txt | 2 +- dts/Bindings/spi/spi-pl022.yaml | 2 +- dts/Bindings/spmi/qcom,spmi-pmic-arb.txt | 65 - dts/Bindings/spmi/qcom,spmi-pmic-arb.yaml | 117 + dts/Bindings/staging/net/wireless/silabs,wfx.yaml | 137 - dts/Bindings/thermal/qcom-lmh.yaml | 1 + dts/Bindings/thermal/qcom-spmi-adc-tm5.yaml | 110 +- dts/Bindings/thermal/qcom-tsens.yaml | 6 +- dts/Bindings/thermal/rzg2l-thermal.yaml | 2 + dts/Bindings/thermal/ti,j72xx-thermal.yaml | 63 + dts/Bindings/timer/cdns,ttc.yaml | 1 - dts/Bindings/timer/hpe,gxp-timer.yaml | 47 + dts/Bindings/timer/mediatek,mtk-timer.txt | 1 + dts/Bindings/timer/rda,8810pl-timer.txt | 20 - dts/Bindings/timer/rda,8810pl-timer.yaml | 47 + dts/Bindings/timer/renesas,16bit-timer.txt | 25 - dts/Bindings/timer/renesas,8bit-timer.txt | 25 - dts/Bindings/timer/renesas,ostm.yaml | 2 + dts/Bindings/timer/samsung,exynos4210-mct.yaml | 72 +- dts/Bindings/timer/ti,timer-dm.yaml | 152 + dts/Bindings/timer/ti,timer.txt | 44 - dts/Bindings/timer/xlnx,xps-timer.yaml | 92 + .../timestamp/hardware-timestamps-common.yaml | 29 + dts/Bindings/timestamp/hte-consumer.yaml | 39 + dts/Bindings/timestamp/nvidia,tegra194-hte.yaml | 88 + dts/Bindings/trivial-devices.yaml | 12 +- dts/Bindings/usb/am33xx-usb.txt | 7 +- dts/Bindings/usb/ci-hdrc-usb2.txt | 2 +- dts/Bindings/usb/da8xx-usb.txt | 5 +- dts/Bindings/usb/dwc2.yaml | 11 +- dts/Bindings/usb/dwc3-xilinx.yaml | 4 + dts/Bindings/usb/fcs,fsa4480.yaml | 72 + dts/Bindings/usb/generic-ehci.yaml | 1 + dts/Bindings/usb/generic-ohci.yaml | 1 + dts/Bindings/usb/mediatek,mt6360-tcpc.yaml | 5 + dts/Bindings/usb/mediatek,mtu3.yaml | 1 + dts/Bindings/usb/qcom,dwc3.yaml | 227 +- dts/Bindings/usb/renesas,usbhs.yaml | 4 + dts/Bindings/usb/samsung,exynos-usb2.yaml | 15 +- dts/Bindings/usb/smsc,usb3503.yaml | 3 +- dts/Bindings/usb/snps,dwc3.yaml | 2 + dts/Bindings/usb/ti,am62-usb.yaml | 103 + dts/Bindings/vendor-prefixes.yaml | 12 + dts/Bindings/watchdog/allwinner,sun4i-a10-wdt.yaml | 24 +- dts/Bindings/watchdog/da9062-wdt.txt | 6 + dts/Bindings/watchdog/faraday,ftwdt010.txt | 22 - dts/Bindings/watchdog/faraday,ftwdt010.yaml | 67 + dts/Bindings/watchdog/fsl-imx7ulp-wdt.yaml | 1 + dts/Bindings/watchdog/mtk-wdt.txt | 1 + dts/Bindings/watchdog/qcom-wdt.yaml | 39 +- dts/Bindings/watchdog/renesas,wdt.yaml | 12 +- dts/Bindings/watchdog/socionext,uniphier-wdt.yaml | 2 +- dts/Bindings/watchdog/sunplus,sp7021-wdt.yaml | 47 + dts/Bindings/writing-bindings.rst | 25 + dts/Bindings/writing-schema.rst | 8 + dts/include/dt-bindings/clock/en7523-clk.h | 17 + dts/include/dt-bindings/clock/imx8mn-clock.h | 16 +- dts/include/dt-bindings/clock/imx8mp-clock.h | 9 +- dts/include/dt-bindings/clock/mt8186-clk.h | 445 +++ dts/include/dt-bindings/clock/qcom,gcc-msm8976.h | 1 + dts/include/dt-bindings/clock/qcom,gcc-msm8998.h | 4 + dts/include/dt-bindings/clock/qcom,gcc-sc8280xp.h | 496 +++ .../dt-bindings/clock/qcom,lpassaudiocc-sc7280.h | 43 + .../dt-bindings/clock/qcom,lpasscorecc-sc7280.h | 26 + dts/include/dt-bindings/clock/r8a779g0-cpg-mssr.h | 90 + dts/include/dt-bindings/clock/r9a07g043-cpg.h | 184 + dts/include/dt-bindings/clock/r9a09g011-cpg.h | 352 ++ .../dt-bindings/clock/samsung,exynosautov9.h | 299 ++ dts/include/dt-bindings/clock/ste-db8500-clkout.h | 17 + dts/include/dt-bindings/clock/stm32mp1-clks.h | 46 +- dts/include/dt-bindings/clock/stm32mp13-clks.h | 229 ++ dts/include/dt-bindings/clock/sun50i-h6-r-ccu.h | 1 + dts/include/dt-bindings/clock/sun50i-h616-ccu.h | 1 + dts/include/dt-bindings/clock/tegra234-clock.h | 8 + dts/include/dt-bindings/gce/mt8186-gce.h | 421 +++ .../dt-bindings/interconnect/qcom,sc8180x.h | 7 + .../dt-bindings/interconnect/qcom,sc8280xp.h | 232 ++ dts/include/dt-bindings/interconnect/qcom,sdx65.h | 67 + dts/include/dt-bindings/mailbox/tegra186-hsp.h | 5 + .../dt-bindings/memory/mt8186-memory-port.h | 217 ++ .../dt-bindings/memory/mt8195-memory-port.h | 408 +++ dts/include/dt-bindings/memory/mtk-memory-port.h | 2 + dts/include/dt-bindings/mfd/cros_ec.h | 18 + dts/include/dt-bindings/pinctrl/mt6795-pinfunc.h | 908 +++++ dts/include/dt-bindings/power/imx8mp-power.h | 18 + dts/include/dt-bindings/power/qcom-rpmpd.h | 26 + dts/include/dt-bindings/power/r8a779g0-sysc.h | 45 + .../dt-bindings/reset/amlogic,meson-s4-reset.h | 125 + dts/include/dt-bindings/reset/mt7986-resets.h | 55 + dts/include/dt-bindings/reset/mt8186-resets.h | 36 + dts/include/dt-bindings/reset/mt8192-resets.h | 3 + dts/include/dt-bindings/reset/stm32mp1-resets.h | 24 +- dts/include/dt-bindings/reset/stm32mp13-resets.h | 100 + dts/include/dt-bindings/reset/tegra234-reset.h | 2 + dts/include/dt-bindings/soc/rockchip,vop2.h | 14 + dts/include/dt-bindings/sound/cs35l45.h | 20 + dts/src/arm/am335x-baltos.dtsi | 2 +- dts/src/arm/am335x-bone-common.dtsi | 4 + dts/src/arm/am335x-evm.dts | 4 + dts/src/arm/am335x-evmsk.dts | 4 + dts/src/arm/am335x-guardian.dts | 376 +- dts/src/arm/am335x-moxa-uc-2100-common.dtsi | 2 +- dts/src/arm/am335x-moxa-uc-8100-common.dtsi | 2 +- dts/src/arm/am335x-myirtech-myc.dtsi | 12 +- dts/src/arm/am335x-myirtech-myd.dts | 20 +- dts/src/arm/am335x-phycore-som.dtsi | 2 +- dts/src/arm/am335x-sl50.dts | 2 +- dts/src/arm/am33xx-clocks.dtsi | 373 +- dts/src/arm/am33xx.dtsi | 3 + dts/src/arm/am35xx-clocks.dtsi | 52 +- dts/src/arm/am3874-iceboard.dts | 2 +- dts/src/arm/am437x-cm-t43.dts | 2 +- dts/src/arm/am437x-gp-evm.dts | 5 + dts/src/arm/am437x-idk-evm.dts | 2 +- dts/src/arm/am437x-sk-evm.dts | 6 +- dts/src/arm/am43x-epos-evm.dts | 6 +- dts/src/arm/am43xx-clocks.dtsi | 339 +- dts/src/arm/am574x-idk.dts | 2 +- dts/src/arm/am57xx-cl-som-am57x.dts | 2 +- dts/src/arm/am57xx-idk-common.dtsi | 2 +- dts/src/arm/armada-370-db.dts | 2 +- dts/src/arm/armada-370-seagate-personal-cloud.dtsi | 2 +- dts/src/arm/armada-370-synology-ds213j.dts | 2 +- dts/src/arm/armada-375-db.dts | 2 +- dts/src/arm/armada-381-netgear-gs110emx.dts | 2 +- dts/src/arm/armada-385-atl-x530.dts | 2 +- dts/src/arm/armada-385-clearfog-gtr.dtsi | 2 +- dts/src/arm/armada-385-db-88f6820-amc.dts | 2 +- dts/src/arm/armada-385-db-ap.dts | 2 +- dts/src/arm/armada-385-synology-ds116.dts | 2 +- dts/src/arm/armada-385-turris-omnia.dts | 8 +- dts/src/arm/armada-388-db.dts | 2 +- dts/src/arm/armada-388-gp.dts | 2 +- dts/src/arm/armada-388-rd.dts | 2 +- dts/src/arm/armada-38x-solidrun-microsom.dtsi | 2 +- dts/src/arm/armada-390-db.dts | 2 +- dts/src/arm/armada-398-db.dts | 2 +- dts/src/arm/armada-xp-axpwifiap.dts | 2 +- dts/src/arm/armada-xp-crs305-1g-4s-bit.dts | 2 +- dts/src/arm/armada-xp-crs305-1g-4s.dtsi | 2 +- dts/src/arm/armada-xp-crs326-24g-2s-bit.dts | 2 +- dts/src/arm/armada-xp-crs326-24g-2s.dtsi | 2 +- dts/src/arm/armada-xp-crs328-4c-20s-4s-bit.dts | 2 +- dts/src/arm/armada-xp-crs328-4c-20s-4s.dtsi | 2 +- dts/src/arm/armada-xp-db-dxbc2.dts | 2 +- dts/src/arm/armada-xp-db-xc3-24g4xg.dts | 2 +- dts/src/arm/armada-xp-db.dts | 2 +- dts/src/arm/armada-xp-gp.dts | 2 +- dts/src/arm/armada-xp-linksys-mamba.dts | 2 +- dts/src/arm/armada-xp-synology-ds414.dts | 2 +- dts/src/arm/aspeed-ast2600-evb.dts | 39 +- dts/src/arm/aspeed-bmc-facebook-bletchley.dts | 182 +- dts/src/arm/aspeed-bmc-ibm-everest.dts | 2 +- dts/src/arm/aspeed-bmc-ibm-rainier.dts | 2 +- dts/src/arm/aspeed-bmc-nuvia-dc-scm.dts | 190 + dts/src/arm/aspeed-g4.dtsi | 16 +- dts/src/arm/aspeed-g5.dtsi | 16 +- dts/src/arm/aspeed-g6.dtsi | 42 +- dts/src/arm/at91-sama7g5ek.dts | 21 +- dts/src/arm/at91sam9261ek.dts | 4 + dts/src/arm/at91sam9263ek.dts | 4 + dts/src/arm/at91sam9rlek.dts | 4 + dts/src/arm/bcm-cygnus.dtsi | 12 +- dts/src/arm/bcm2835-rpi-a-plus.dts | 21 +- dts/src/arm/bcm2835-rpi-a.dts | 35 +- dts/src/arm/bcm2835-rpi-b-plus.dts | 19 +- dts/src/arm/bcm2835-rpi-b-rev2.dts | 35 +- dts/src/arm/bcm2835-rpi-b.dts | 48 +- dts/src/arm/bcm2835-rpi-cm1-io1.dts | 1 - dts/src/arm/bcm2835-rpi-zero-w.dts | 25 +- dts/src/arm/bcm2835-rpi-zero.dts | 29 +- dts/src/arm/bcm2836-rpi-2-b.dts | 3 +- dts/src/arm/bcm2837-rpi-3-a-plus.dts | 1 - dts/src/arm/bcm2837-rpi-3-b-plus.dts | 5 +- dts/src/arm/bcm2837-rpi-3-b.dts | 3 +- dts/src/arm/bcm2837-rpi-cm3-io3.dts | 5 +- dts/src/arm/bcm2837-rpi-cm3.dtsi | 12 +- dts/src/arm/bcm283x-rpi-smsc9512.dtsi | 2 +- dts/src/arm/bcm283x-rpi-smsc9514.dtsi | 2 +- .../arm/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 192 + dts/src/arm/bcm4708-buffalo-wzr-1166dhp.dts | 26 + dts/src/arm/bcm4708-buffalo-wzr-1166dhp2.dts | 26 + dts/src/arm/bcm47094-asus-rt-ac88u.dts | 19 +- dts/src/arm/bcm47622.dtsi | 126 + dts/src/arm/bcm53016-meraki-mr32.dts | 2 +- dts/src/arm/bcm5301x.dtsi | 2 +- dts/src/arm/bcm53340-ubnt-unifi-switch8.dts | 2 +- dts/src/arm/bcm947622.dts | 30 + dts/src/arm/bcm953012er.dts | 2 +- dts/src/arm/bcm953012hr.dts | 2 +- dts/src/arm/bcm953012k.dts | 2 +- dts/src/arm/bcm958522er.dts | 2 +- dts/src/arm/bcm958525er.dts | 2 +- dts/src/arm/bcm958525xmc.dts | 2 +- dts/src/arm/bcm958622hr.dts | 2 +- dts/src/arm/bcm958623hr.dts | 2 +- dts/src/arm/bcm958625hr.dts | 2 +- dts/src/arm/bcm958625k.dts | 2 +- dts/src/arm/bcm988312hr.dts | 2 +- dts/src/arm/da850.dtsi | 2 + dts/src/arm/dm814x.dtsi | 3 + dts/src/arm/dm816x.dtsi | 3 + dts/src/arm/dove-cubox.dts | 2 +- dts/src/arm/dove-d2plug.dts | 2 +- dts/src/arm/dove-d3plug.dts | 2 +- dts/src/arm/dove-dove-db.dts | 2 +- dts/src/arm/dra7-evm-common.dtsi | 2 +- dts/src/arm/dra72-evm-common.dtsi | 2 +- dts/src/arm/dra76-evm.dts | 2 +- dts/src/arm/dra7xx-clocks.dtsi | 693 ++-- dts/src/arm/exynos3250.dtsi | 7 +- dts/src/arm/exynos4.dtsi | 10 +- dts/src/arm/exynos4210-universal_c210.dts | 2 - dts/src/arm/exynos4412-odroidu3.dts | 4 +- dts/src/arm/exynos4412-odroidx.dts | 8 +- dts/src/arm/exynos5250-smdk5250.dts | 4 +- dts/src/arm/exynos5250.dtsi | 16 +- dts/src/arm/exynos5260.dtsi | 3 +- dts/src/arm/exynos5410-odroidxu.dts | 4 +- dts/src/arm/exynos5410.dtsi | 4 - dts/src/arm/exynos5420.dtsi | 10 - dts/src/arm/exynos5422-odroid-core.dtsi | 7 +- dts/src/arm/exynos5422-odroidxu3-lite.dts | 6 +- dts/src/arm/exynos5422-odroidxu3.dts | 6 +- dts/src/arm/exynos54xx.dtsi | 3 +- dts/src/arm/hpe-bmc-dl360gen10.dts | 26 + dts/src/arm/hpe-gxp.dtsi | 127 + dts/src/arm/imx27.dtsi | 2 +- dts/src/arm/imx28-evk.dts | 2 +- dts/src/arm/imx28-m28evk.dts | 2 +- dts/src/arm/imx28-sps1.dts | 2 +- dts/src/arm/imx51-digi-connectcore-jsk.dts | 8 + dts/src/arm/imx51-digi-connectcore-som.dtsi | 25 +- dts/src/arm/imx51.dtsi | 6 + dts/src/arm/imx6dl-colibri-aster.dts | 113 + dts/src/arm/imx6dl-colibri-eval-v3.dts | 110 +- dts/src/arm/imx6dl-colibri-iris-v2.dts | 46 + dts/src/arm/imx6dl-colibri-iris.dts | 152 + dts/src/arm/imx6dl-colibri-v1_1-eval-v3.dts | 31 - dts/src/arm/imx6dl-eckelmann-ci4x10.dts | 6 +- dts/src/arm/imx6dl-plybas.dts | 2 +- dts/src/arm/imx6dl-rex-basic.dts | 2 +- dts/src/arm/imx6dl-victgo.dts | 657 +--- dts/src/arm/imx6dl-vicut1.dts | 1 + dts/src/arm/imx6q-ba16.dtsi | 2 +- dts/src/arm/imx6q-bosch-acc.dts | 779 ++++ dts/src/arm/imx6q-bx50v3.dtsi | 2 +- dts/src/arm/imx6q-cm-fx6.dts | 2 +- dts/src/arm/imx6q-dmo-edmqmx6.dts | 2 +- dts/src/arm/imx6q-dms-ba16.dts | 2 +- dts/src/arm/imx6q-gw5400-a.dts | 2 +- dts/src/arm/imx6q-marsboard.dts | 2 +- dts/src/arm/imx6q-rex-pro.dts | 2 +- dts/src/arm/imx6q-vicut1.dts | 5 +- dts/src/arm/imx6qdl-aristainetos.dtsi | 2 +- dts/src/arm/imx6qdl-aristainetos2.dtsi | 2 +- dts/src/arm/imx6qdl-colibri-v1_1-uhs.dtsi | 44 - dts/src/arm/imx6qdl-colibri.dtsi | 771 +++- dts/src/arm/imx6qdl-dfi-fs700-m60.dtsi | 2 +- dts/src/arm/imx6qdl-kontron-samx6i.dtsi | 2 +- dts/src/arm/imx6qdl-nit6xlite.dtsi | 2 +- dts/src/arm/imx6qdl-nitrogen6_max.dtsi | 2 +- dts/src/arm/imx6qdl-nitrogen6_som2.dtsi | 2 +- dts/src/arm/imx6qdl-nitrogen6x.dtsi | 2 +- dts/src/arm/imx6qdl-phytec-pfla02.dtsi | 4 +- dts/src/arm/imx6qdl-sabreauto.dtsi | 2 +- dts/src/arm/imx6qdl-sabrelite.dtsi | 2 +- dts/src/arm/imx6qdl-sabresd.dtsi | 2 +- dts/src/arm/imx6qdl-sr-som.dtsi | 10 + dts/src/arm/imx6qdl-tx6.dtsi | 5 - dts/src/arm/imx6qdl-udoo.dtsi | 2 +- dts/src/arm/imx6qdl-vicut1-12inch.dtsi | 128 + dts/src/arm/imx6qdl-vicut1.dtsi | 261 +- dts/src/arm/imx6qp-vicutp.dts | 1 + dts/src/arm/imx6sl-evk.dts | 2 +- dts/src/arm/imx6sl.dtsi | 2 +- dts/src/arm/imx6sx-nitrogen6sx.dts | 2 +- dts/src/arm/imx6sx-sdb-reva.dts | 4 +- dts/src/arm/imx6sx-sdb.dts | 4 +- dts/src/arm/imx6ul-14x14-evk.dtsi | 2 +- dts/src/arm/imx6ul-kontron-n6310-som.dtsi | 2 +- dts/src/arm/imx6ul-kontron-n6311-som.dtsi | 2 +- dts/src/arm/imx6ul-kontron-n6x1x-s.dtsi | 2 +- dts/src/arm/imx6ul-kontron-n6x1x-som-common.dtsi | 2 +- dts/src/arm/imx6ul-phytec-segin-peb-av-02.dtsi | 3 +- dts/src/arm/imx6ul-tqma6ul-common.dtsi | 211 ++ dts/src/arm/imx6ul-tqma6ul1-mba6ulx.dts | 55 + dts/src/arm/imx6ul-tqma6ul1.dtsi | 37 + dts/src/arm/imx6ul-tqma6ul2-mba6ulx.dts | 15 + dts/src/arm/imx6ul-tqma6ul2.dtsi | 71 + dts/src/arm/imx6ul-tqma6ul2l-mba6ulx.dts | 15 + dts/src/arm/imx6ul-tqma6ul2l.dtsi | 71 + dts/src/arm/imx6ul-tqma6ulx-common.dtsi | 43 + dts/src/arm/imx6ul-tqma6ulxl-common.dtsi | 48 + dts/src/arm/imx6ull-colibri-aster.dts | 20 + dts/src/arm/imx6ull-colibri-aster.dtsi | 145 + dts/src/arm/imx6ull-colibri-emmc-aster.dts | 17 + dts/src/arm/imx6ull-colibri-emmc-iris-v2.dts | 17 + dts/src/arm/imx6ull-colibri-emmc-iris.dts | 17 + dts/src/arm/imx6ull-colibri-emmc-nonwifi.dtsi | 8 +- dts/src/arm/imx6ull-colibri-eval-v3.dts | 6 +- dts/src/arm/imx6ull-colibri-eval-v3.dtsi | 63 +- dts/src/arm/imx6ull-colibri-iris-v2.dts | 65 + dts/src/arm/imx6ull-colibri-iris-v2.dtsi | 27 + dts/src/arm/imx6ull-colibri-iris.dts | 20 + dts/src/arm/imx6ull-colibri-iris.dtsi | 132 + dts/src/arm/imx6ull-colibri-nonwifi.dtsi | 145 +- dts/src/arm/imx6ull-colibri-wifi-aster.dts | 20 + dts/src/arm/imx6ull-colibri-wifi-eval-v3.dts | 4 +- dts/src/arm/imx6ull-colibri-wifi-iris-v2.dts | 65 + dts/src/arm/imx6ull-colibri-wifi-iris.dts | 20 + dts/src/arm/imx6ull-colibri-wifi.dtsi | 144 +- dts/src/arm/imx6ull-colibri.dtsi | 285 +- dts/src/arm/imx6ull-kontron-n6411-som.dtsi | 2 +- dts/src/arm/imx6ull-phytec-tauri-emmc.dts | 20 + dts/src/arm/imx6ull-phytec-tauri-nand.dts | 20 + dts/src/arm/imx6ull-phytec-tauri.dtsi | 588 +++ dts/src/arm/imx6ull-tqma6ull2-mba6ulx.dts | 15 + dts/src/arm/imx6ull-tqma6ull2.dtsi | 76 + dts/src/arm/imx6ull-tqma6ull2l-mba6ulx.dts | 15 + dts/src/arm/imx6ull-tqma6ull2l.dtsi | 76 + dts/src/arm/imx7d-smegw01.dts | 469 +++ dts/src/arm/imx7s.dtsi | 2 +- dts/src/arm/imxrt1050-evk.dts | 72 + dts/src/arm/imxrt1050.dtsi | 160 + dts/src/arm/keystone-k2e-evm.dts | 4 +- dts/src/arm/keystone-k2g-evm.dts | 2 +- dts/src/arm/keystone-k2g-ice.dts | 2 +- dts/src/arm/keystone-k2hk-evm.dts | 4 +- dts/src/arm/keystone-k2l-evm.dts | 4 +- dts/src/arm/kirkwood-dir665.dts | 2 +- dts/src/arm/kirkwood-synology.dtsi | 2 +- .../arm/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts | 94 + dts/src/arm/lan966x-kontron-kswitch-d10-mmt-8g.dts | 39 + dts/src/arm/lan966x-kontron-kswitch-d10-mmt.dtsi | 190 + dts/src/arm/lan966x-pcb8291.dts | 2 +- dts/src/arm/lan966x.dtsi | 353 +- dts/src/arm/logicpd-som-lv.dtsi | 10 +- dts/src/arm/ls1021a-iot.dts | 227 ++ dts/src/arm/ls1021a.dtsi | 6 +- dts/src/arm/mba6ulx.dtsi | 569 +++ dts/src/arm/meson8-minix-neo-x8.dts | 2 +- dts/src/arm/mmp2.dtsi | 2 + dts/src/arm/mt2701.dtsi | 2 - dts/src/arm/mt7623n.dtsi | 5 - dts/src/arm/nspire-classic.dtsi | 10 +- dts/src/arm/nspire-cx.dts | 4 +- dts/src/arm/nspire.dtsi | 60 +- dts/src/arm/nuvoton-npcm730-gbs.dts | 6 +- dts/src/arm/nuvoton-npcm730-gsj.dts | 2 +- dts/src/arm/nuvoton-npcm730-kudo.dts | 6 +- dts/src/arm/nuvoton-npcm750-evb.dts | 8 +- dts/src/arm/nuvoton-npcm750-runbmc-olympus.dts | 6 +- dts/src/arm/omap3-beagle-xm.dts | 2 +- dts/src/arm/omap3430es1-clocks.dtsi | 184 +- dts/src/arm/omap34xx-omap36xx-clocks.dtsi | 275 +- .../omap36xx-am35xx-omap3430es2plus-clocks.dtsi | 79 +- dts/src/arm/omap36xx-clocks.dtsi | 17 +- dts/src/arm/omap36xx-omap3430es2plus-clocks.dtsi | 136 +- dts/src/arm/omap3xxx-clocks.dtsi | 2044 ++++++----- dts/src/arm/omap4-panda-common.dtsi | 2 +- dts/src/arm/omap443x-clocks.dtsi | 1 + dts/src/arm/omap446x-clocks.dtsi | 2 + dts/src/arm/omap44xx-clocks.dtsi | 173 +- dts/src/arm/omap5-igep0050.dts | 2 +- dts/src/arm/omap5-uevm.dts | 2 +- dts/src/arm/omap54xx-clocks.dtsi | 160 +- dts/src/arm/ox820.dtsi | 2 +- dts/src/arm/pxa25x.dtsi | 5 +- dts/src/arm/pxa27x.dtsi | 5 +- dts/src/arm/pxa3xx.dtsi | 5 +- dts/src/arm/qcom-apq8026-asus-sparrow.dts | 294 ++ .../arm/qcom-apq8064-sony-xperia-lagan-yuga.dts | 401 +++ dts/src/arm/qcom-apq8064-sony-xperia-yuga.dts | 401 --- dts/src/arm/qcom-apq8064.dtsi | 16 +- dts/src/arm/qcom-apq8074-dragonboard.dts | 582 ++- dts/src/arm/qcom-apq8084.dtsi | 2 +- dts/src/arm/qcom-ipq4019-ap.dk01.1.dtsi | 4 +- dts/src/arm/qcom-ipq4019-ap.dk04.1-c1.dts | 2 +- dts/src/arm/qcom-ipq4019-ap.dk04.1.dtsi | 4 +- dts/src/arm/qcom-ipq4019-ap.dk07.1-c1.dts | 2 +- dts/src/arm/qcom-ipq4019-ap.dk07.1.dtsi | 4 +- dts/src/arm/qcom-ipq4019.dtsi | 44 +- dts/src/arm/qcom-ipq8064-v1.0.dtsi | 2 +- dts/src/arm/qcom-ipq8064.dtsi | 12 +- dts/src/arm/qcom-mdm9615.dtsi | 4 +- dts/src/arm/qcom-msm8226.dtsi | 9 + dts/src/arm/qcom-msm8660.dtsi | 1 + dts/src/arm/qcom-msm8974-fairphone-fp2.dts | 409 --- dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts | 1052 +++--- dts/src/arm/qcom-msm8974-samsung-klte.dts | 908 ----- dts/src/arm/qcom-msm8974-sony-xperia-amami.dts | 435 --- dts/src/arm/qcom-msm8974-sony-xperia-castor.dts | 723 ---- dts/src/arm/qcom-msm8974-sony-xperia-honami.dts | 484 --- .../arm/qcom-msm8974-sony-xperia-rhine-amami.dts | 13 + .../arm/qcom-msm8974-sony-xperia-rhine-honami.dts | 7 + dts/src/arm/qcom-msm8974-sony-xperia-rhine.dtsi | 457 +++ dts/src/arm/qcom-msm8974.dtsi | 1916 +++++----- dts/src/arm/qcom-msm8974pro-fairphone-fp2.dts | 432 +++ dts/src/arm/qcom-msm8974pro-samsung-klte.dts | 813 +++++ .../qcom-msm8974pro-sony-xperia-shinano-castor.dts | 608 ++++ dts/src/arm/qcom-msm8974pro.dtsi | 32 +- dts/src/arm/qcom-pm8226.dtsi | 41 + dts/src/arm/qcom-pm8941.dtsi | 2 +- dts/src/arm/qcom-pmx65.dtsi | 32 + dts/src/arm/qcom-sdx55.dtsi | 20 +- dts/src/arm/qcom-sdx65-mtp.dts | 221 ++ dts/src/arm/qcom-sdx65.dtsi | 193 +- dts/src/arm/r8a7743.dtsi | 1 + dts/src/arm/r8a7744.dtsi | 1 + dts/src/arm/r8a7745.dtsi | 1 + dts/src/arm/r8a77470.dtsi | 1 + dts/src/arm/r8a7790.dtsi | 1 + dts/src/arm/r8a7791.dtsi | 1 + dts/src/arm/r8a7792.dtsi | 1 + dts/src/arm/r8a7793.dtsi | 1 + dts/src/arm/r8a7794.dtsi | 1 + dts/src/arm/r9a06g032.dtsi | 113 +- dts/src/arm/rk3036.dtsi | 6 +- dts/src/arm/rk3066a.dtsi | 3 +- dts/src/arm/rk3188-bqedison2qc.dts | 3 +- dts/src/arm/rk3188.dtsi | 3 +- dts/src/arm/rk322x.dtsi | 4 +- dts/src/arm/rk3288.dtsi | 2 + dts/src/arm/rv1108.dtsi | 31 +- dts/src/arm/s5pv210-aquila.dts | 3 +- dts/src/arm/s5pv210-aries.dtsi | 11 +- dts/src/arm/s5pv210-goni.dts | 6 +- dts/src/arm/s5pv210.dtsi | 46 +- dts/src/arm/sam9x60.dtsi | 2 +- dts/src/arm/sama7g5.dtsi | 27 +- dts/src/arm/socfpga.dtsi | 4 +- dts/src/arm/socfpga_arria10.dtsi | 4 +- dts/src/arm/socfpga_arria10_socdk_qspi.dts | 2 +- dts/src/arm/socfpga_cyclone5_socdk.dts | 2 +- dts/src/arm/socfpga_cyclone5_sodia.dts | 2 +- dts/src/arm/socfpga_cyclone5_vining_fpga.dts | 4 +- dts/src/arm/ste-dbx5x0.dtsi | 12 +- dts/src/arm/ste-ux500-samsung-codina-tmo.dts | 785 ++++ dts/src/arm/ste-ux500-samsung-codina.dts | 80 +- dts/src/arm/ste-ux500-samsung-gavini.dts | 4 + dts/src/arm/ste-ux500-samsung-golden.dts | 4 + dts/src/arm/ste-ux500-samsung-janice.dts | 44 +- dts/src/arm/ste-ux500-samsung-kyle.dts | 4 + dts/src/arm/ste-ux500-samsung-skomer.dts | 35 +- dts/src/arm/stm32f4-pinctrl.dtsi | 2 +- dts/src/arm/stm32f7-pinctrl.dtsi | 2 +- dts/src/arm/stm32h743.dtsi | 2 +- dts/src/arm/stm32mp131.dtsi | 19 +- dts/src/arm/stm32mp135f-dk.dts | 29 + dts/src/arm/stm32mp15-pinctrl.dtsi | 64 + dts/src/arm/stm32mp151.dtsi | 45 +- dts/src/arm/stm32mp151a-prtt1a.dts | 52 + dts/src/arm/stm32mp151a-prtt1c.dts | 304 ++ dts/src/arm/stm32mp151a-prtt1l.dtsi | 229 ++ dts/src/arm/stm32mp151a-prtt1s.dts | 63 + dts/src/arm/stm32mp157a-dk1-scmi.dts | 86 + dts/src/arm/stm32mp157c-dk2-scmi.dts | 95 + dts/src/arm/stm32mp157c-ed1-scmi.dts | 91 + dts/src/arm/stm32mp157c-ev1-scmi.dts | 100 + dts/src/arm/stm32mp15xx-dhcom-som.dtsi | 22 +- dts/src/arm/stm32mp15xx-dhcor-avenger96.dtsi | 1 + dts/src/arm/sun8i-h3-nanopi.dtsi | 1 - dts/src/arm/suniv-f1c100s-licheepi-nano.dts | 31 + dts/src/arm/suniv-f1c100s.dtsi | 104 +- dts/src/arm/zynq-7000.dtsi | 2 - dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts | 30 + dts/src/arm64/allwinner/sun50i-a64-teres-i.dts | 8 + dts/src/arm64/altera/socfpga_stratix10.dtsi | 2 - .../amlogic/meson-axg-jethome-jethub-j100.dts | 16 +- dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi | 2 +- .../arm64/amlogic/meson-gxl-s805x-libretech-ac.dts | 2 +- .../amlogic/meson-gxl-s905w-jethome-jethub-j80.dts | 6 + .../amlogic/meson-gxl-s905x-libretech-cc-v2.dts | 2 +- dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts | 2 +- dts/src/arm64/amlogic/meson-khadas-vim3.dtsi | 2 +- dts/src/arm64/amlogic/meson-s4.dtsi | 33 + dts/src/arm64/amlogic/meson-sm1-odroid-hc4.dts | 2 +- dts/src/arm64/arm/corstone1000-fvp.dts | 51 + dts/src/arm64/arm/corstone1000-mps3.dts | 32 + dts/src/arm64/arm/corstone1000.dtsi | 164 + dts/src/arm64/arm/foundation-v8.dtsi | 2 +- dts/src/arm64/arm/fvp-base-revc.dts | 3 +- dts/src/arm64/arm/juno-base.dtsi | 164 +- dts/src/arm64/arm/juno-cs-r1r2.dtsi | 37 +- dts/src/arm64/arm/juno-r1-scmi.dts | 8 +- dts/src/arm64/arm/juno-r1.dts | 25 + dts/src/arm64/arm/juno-r2-scmi.dts | 8 +- dts/src/arm64/arm/juno-r2.dts | 25 + dts/src/arm64/arm/juno-scmi.dtsi | 25 + dts/src/arm64/arm/juno.dts | 25 + dts/src/arm64/arm/rtsm_ve-motherboard-rs2.dtsi | 11 +- dts/src/arm64/arm/rtsm_ve-motherboard.dtsi | 4 +- dts/src/arm64/broadcom/northstar2/ns2-svk.dts | 2 +- dts/src/arm64/broadcom/northstar2/ns2-xmc.dts | 2 +- dts/src/arm64/broadcom/northstar2/ns2.dtsi | 2 - dts/src/arm64/broadcom/stingray/bcm958742k.dts | 4 +- dts/src/arm64/broadcom/stingray/stingray.dtsi | 2 - dts/src/arm64/exynos/exynos5433.dtsi | 9 +- dts/src/arm64/exynos/exynos7.dtsi | 4 - dts/src/arm64/exynos/exynos850-e850-96.dts | 5 + dts/src/arm64/exynos/exynos850.dtsi | 19 +- dts/src/arm64/exynos/exynosautov9-sadk.dts | 4 + dts/src/arm64/exynos/exynosautov9.dtsi | 116 +- .../arm64/freescale/fsl-ls1028a-kontron-sl28.dts | 9 + dts/src/arm64/freescale/fsl-ls1028a-qds.dts | 2 + dts/src/arm64/freescale/fsl-ls1028a-rdb.dts | 2 +- dts/src/arm64/freescale/fsl-ls1028a.dtsi | 2 - dts/src/arm64/freescale/fsl-ls1043a.dtsi | 6 +- dts/src/arm64/freescale/fsl-ls1046a.dtsi | 6 +- dts/src/arm64/freescale/fsl-ls1088a.dtsi | 6 +- dts/src/arm64/freescale/fsl-ls208xa-qds.dtsi | 10 +- dts/src/arm64/freescale/fsl-ls208xa-rdb.dtsi | 2 +- dts/src/arm64/freescale/fsl-ls208xa.dtsi | 6 +- dts/src/arm64/freescale/fsl-lx2160a.dtsi | 6 +- dts/src/arm64/freescale/imx8-ss-vpu.dtsi | 74 + .../arm64/freescale/imx8mm-beacon-baseboard.dtsi | 3 + .../arm64/freescale/imx8mm-data-modul-edm-sbc.dts | 997 ++++++ dts/src/arm64/freescale/imx8mm-emcon.dtsi | 2 +- dts/src/arm64/freescale/imx8mm-evk.dtsi | 20 + dts/src/arm64/freescale/imx8mm-kontron-n801x-s.dts | 2 +- .../arm64/freescale/imx8mm-kontron-n801x-som.dtsi | 2 +- dts/src/arm64/freescale/imx8mm-mx8menlo.dts | 334 ++ dts/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi | 1 + dts/src/arm64/freescale/imx8mm-venice-gw72xx.dtsi | 1 + dts/src/arm64/freescale/imx8mm-venice-gw73xx.dtsi | 2 + dts/src/arm64/freescale/imx8mm-venice-gw7901.dts | 16 +- dts/src/arm64/freescale/imx8mm-venice-gw7902.dts | 17 +- dts/src/arm64/freescale/imx8mm-venice-gw7903.dts | 1 + dts/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi | 2 +- dts/src/arm64/freescale/imx8mm-verdin-wifi.dtsi | 26 +- dts/src/arm64/freescale/imx8mm-verdin.dtsi | 411 ++- dts/src/arm64/freescale/imx8mm.dtsi | 8 +- .../arm64/freescale/imx8mn-beacon-baseboard.dtsi | 3 + dts/src/arm64/freescale/imx8mn-bsh-smm-s2pro.dts | 90 + dts/src/arm64/freescale/imx8mn-ddr3l-evk.dts | 114 + dts/src/arm64/freescale/imx8mn-evk.dts | 54 +- dts/src/arm64/freescale/imx8mn-evk.dtsi | 45 + dts/src/arm64/freescale/imx8mn-venice-gw7902.dts | 8 + dts/src/arm64/freescale/imx8mn.dtsi | 14 +- .../freescale/imx8mp-icore-mx8mp-edimm2.2.dts | 175 + dts/src/arm64/freescale/imx8mp-icore-mx8mp.dtsi | 186 + dts/src/arm64/freescale/imx8mp-venice-gw74xx.dts | 896 +++++ dts/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi | 129 + dts/src/arm64/freescale/imx8mp-verdin-dev.dtsi | 46 + .../freescale/imx8mp-verdin-nonwifi-dahlia.dts | 18 + .../arm64/freescale/imx8mp-verdin-nonwifi-dev.dts | 18 + dts/src/arm64/freescale/imx8mp-verdin-nonwifi.dtsi | 54 + .../arm64/freescale/imx8mp-verdin-wifi-dahlia.dts | 18 + dts/src/arm64/freescale/imx8mp-verdin-wifi-dev.dts | 18 + dts/src/arm64/freescale/imx8mp-verdin-wifi.dtsi | 82 + dts/src/arm64/freescale/imx8mp-verdin.dtsi | 1380 +++++++ dts/src/arm64/freescale/imx8mp.dtsi | 247 +- .../arm64/freescale/imx8mq-kontron-pitx-imx8m.dts | 2 +- dts/src/arm64/freescale/imx8mq-librem5-devkit.dts | 2 +- dts/src/arm64/freescale/imx8mq-librem5-r4.dts | 4 + dts/src/arm64/freescale/imx8mq-librem5.dtsi | 15 +- dts/src/arm64/freescale/imx8mq-mnt-reform2.dts | 2 +- dts/src/arm64/freescale/imx8mq.dtsi | 15 +- dts/src/arm64/freescale/imx8qxp-mek.dts | 25 + dts/src/arm64/freescale/imx8qxp.dtsi | 24 + dts/src/arm64/hisilicon/hi3660.dtsi | 4 +- dts/src/arm64/hisilicon/hi3670.dtsi | 4 +- dts/src/arm64/intel/socfpga_agilex.dtsi | 2 - dts/src/arm64/intel/socfpga_agilex_n6000.dts | 66 + dts/src/arm64/marvell/armada-3720-db.dts | 2 +- .../marvell/armada-3720-espressobin-ultra.dts | 9 +- dts/src/arm64/marvell/armada-3720-turris-mox.dts | 14 +- dts/src/arm64/marvell/armada-3720-uDPU.dts | 21 +- dts/src/arm64/marvell/armada-37xx.dtsi | 4 +- dts/src/arm64/marvell/armada-7040-db.dts | 4 +- dts/src/arm64/marvell/armada-7040-mochabin.dts | 2 +- .../arm64/marvell/armada-8040-clearfog-gt-8k.dts | 2 +- dts/src/arm64/marvell/armada-8040-db.dts | 4 +- dts/src/arm64/marvell/armada-8040-mcbin.dtsi | 2 +- dts/src/arm64/marvell/armada-8040-puzzle-m801.dts | 2 +- dts/src/arm64/marvell/armada-ap80x.dtsi | 2 +- dts/src/arm64/marvell/armada-cp11x.dtsi | 2 +- dts/src/arm64/marvell/cn9130-crb.dtsi | 2 +- dts/src/arm64/marvell/cn9130-db.dtsi | 2 +- dts/src/arm64/marvell/cn9131-db.dtsi | 2 +- dts/src/arm64/mediatek/mt2712e.dtsi | 10 +- dts/src/arm64/mediatek/mt6359.dtsi | 298 ++ dts/src/arm64/mediatek/mt7622.dtsi | 52 +- dts/src/arm64/mediatek/mt7986a-rfb.dts | 74 + dts/src/arm64/mediatek/mt7986a.dtsi | 39 + dts/src/arm64/mediatek/mt7986b-rfb.dts | 70 + dts/src/arm64/mediatek/mt8167.dtsi | 2 +- dts/src/arm64/mediatek/mt8173.dtsi | 29 +- dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi | 2 +- dts/src/arm64/mediatek/mt8183-kukui.dtsi | 2 +- dts/src/arm64/mediatek/mt8183-pumpkin.dts | 2 +- dts/src/arm64/mediatek/mt8183.dtsi | 17 +- dts/src/arm64/mediatek/mt8192-evb.dts | 1 + dts/src/arm64/mediatek/mt8192.dtsi | 526 ++- dts/src/arm64/mediatek/mt8195-demo.dts | 450 +++ dts/src/arm64/mediatek/mt8195-evb.dts | 181 + dts/src/arm64/mediatek/mt8195.dtsi | 1045 ++++++ dts/src/arm64/mediatek/pumpkin-common.dtsi | 1 - dts/src/arm64/microchip/sparx5_nand.dtsi | 2 +- dts/src/arm64/microchip/sparx5_pcb125.dts | 4 +- dts/src/arm64/microchip/sparx5_pcb134_board.dtsi | 4 +- dts/src/arm64/microchip/sparx5_pcb135_board.dtsi | 4 +- dts/src/arm64/nvidia/tegra186-p2771-0000.dts | 223 ++ .../nvidia/tegra186-p3509-0000+p3636-0001.dts | 2 +- dts/src/arm64/nvidia/tegra186.dtsi | 15 +- dts/src/arm64/nvidia/tegra194-p2972-0000.dts | 225 +- dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi | 225 +- dts/src/arm64/nvidia/tegra194.dtsi | 42 +- dts/src/arm64/nvidia/tegra210-p3450-0000.dts | 2 +- dts/src/arm64/nvidia/tegra210.dtsi | 5 +- dts/src/arm64/nvidia/tegra234-p3701-0000.dtsi | 12 + .../nvidia/tegra234-p3737-0000+p3701-0000.dts | 223 ++ dts/src/arm64/nvidia/tegra234.dtsi | 67 +- dts/src/arm64/qcom/apq8096-db820c.dts | 24 +- dts/src/arm64/qcom/ipq6018-cp01-c1.dts | 2 +- dts/src/arm64/qcom/ipq6018.dtsi | 46 +- dts/src/arm64/qcom/ipq8074-hk01.dts | 2 +- dts/src/arm64/qcom/ipq8074-hk10.dtsi | 2 +- dts/src/arm64/qcom/ipq8074.dtsi | 58 +- dts/src/arm64/qcom/msm8916-huawei-g7.dts | 59 +- dts/src/arm64/qcom/msm8916.dtsi | 102 +- dts/src/arm64/qcom/msm8953.dtsi | 63 +- dts/src/arm64/qcom/msm8992-xiaomi-libra.dts | 36 +- dts/src/arm64/qcom/msm8992.dtsi | 24 +- .../arm64/qcom/msm8994-huawei-angler-rev-101.dts | 21 +- .../arm64/qcom/msm8994-sony-xperia-kitakami.dtsi | 89 +- dts/src/arm64/qcom/msm8994.dtsi | 133 +- dts/src/arm64/qcom/msm8996-mtp.dts | 8 +- dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi | 18 +- dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi | 56 +- dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts | 9 + dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts | 9 + dts/src/arm64/qcom/msm8996.dtsi | 273 +- dts/src/arm64/qcom/msm8998-oneplus-common.dtsi | 31 + dts/src/arm64/qcom/msm8998.dtsi | 28 +- dts/src/arm64/qcom/pm8350.dtsi | 31 + dts/src/arm64/qcom/pm8350b.dtsi | 31 + dts/src/arm64/qcom/pm8350c.dtsi | 41 +- dts/src/arm64/qcom/pm8450.dtsi | 59 + dts/src/arm64/qcom/pmr735a.dtsi | 32 +- dts/src/arm64/qcom/pmr735b.dtsi | 31 + dts/src/arm64/qcom/qcs404-evb.dtsi | 7 +- dts/src/arm64/qcom/qcs404.dtsi | 102 +- dts/src/arm64/qcom/qrb5165-rb5.dts | 2 +- dts/src/arm64/qcom/sa8155p-adp.dts | 193 + dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi | 11 +- dts/src/arm64/qcom/sc7180-trogdor-homestar-r2.dts | 2 +- dts/src/arm64/qcom/sc7180-trogdor-homestar-r3.dts | 2 +- dts/src/arm64/qcom/sc7180-trogdor-homestar-r4.dts | 2 +- dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi | 7 - .../qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts | 2 +- .../qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts | 4 +- .../qcom/sc7180-trogdor-lazor-limozeen-r4.dts | 2 +- .../qcom/sc7180-trogdor-lazor-limozeen-r9.dts | 2 +- dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts | 2 +- dts/src/arm64/qcom/sc7180-trogdor-lazor-r1-lte.dts | 4 - dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts | 2 +- dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts | 2 +- dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts | 6 +- dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts | 2 +- dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts | 2 +- dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts | 6 +- dts/src/arm64/qcom/sc7180-trogdor-lazor-r9.dts | 2 +- dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi | 7 +- dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi | 9 +- dts/src/arm64/qcom/sc7180-trogdor-r1.dts | 9 +- dts/src/arm64/qcom/sc7180-trogdor.dtsi | 9 +- dts/src/arm64/qcom/sc7180.dtsi | 22 +- dts/src/arm64/qcom/sc7280-crd-r3.dts | 108 + dts/src/arm64/qcom/sc7280-crd.dts | 105 - dts/src/arm64/qcom/sc7280-herobrine-crd.dts | 365 ++ .../arm64/qcom/sc7280-herobrine-herobrine-r0.dts | 1352 ------- .../arm64/qcom/sc7280-herobrine-herobrine-r1.dts | 38 + .../arm64/qcom/sc7280-herobrine-villager-r0.dts | 304 ++ dts/src/arm64/qcom/sc7280-herobrine.dtsi | 93 +- dts/src/arm64/qcom/sc7280-idp.dts | 2 +- dts/src/arm64/qcom/sc7280-idp.dtsi | 36 +- dts/src/arm64/qcom/sc7280-idp2.dts | 4 + dts/src/arm64/qcom/sc7280-qcard.dtsi | 73 +- dts/src/arm64/qcom/sc7280.dtsi | 404 ++- dts/src/arm64/qcom/sdm630.dtsi | 16 +- dts/src/arm64/qcom/sdm660.dtsi | 2 +- dts/src/arm64/qcom/sdm845-db845c.dts | 33 + dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts | 35 +- dts/src/arm64/qcom/sdm845.dtsi | 60 +- dts/src/arm64/qcom/sm6125.dtsi | 16 +- dts/src/arm64/qcom/sm6350.dtsi | 252 +- dts/src/arm64/qcom/sm7225-fairphone-fp4.dts | 61 +- dts/src/arm64/qcom/sm8150.dtsi | 352 +- dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi | 30 +- dts/src/arm64/qcom/sm8250.dtsi | 359 +- dts/src/arm64/qcom/sm8350-hdk.dts | 4 + .../arm64/qcom/sm8350-microsoft-surface-duo2.dts | 12 + dts/src/arm64/qcom/sm8350.dtsi | 207 +- dts/src/arm64/qcom/sm8450-hdk.dts | 41 + dts/src/arm64/qcom/sm8450-qrd.dts | 34 + dts/src/arm64/qcom/sm8450.dtsi | 3780 ++++++++++++++++---- .../arm64/renesas/beacon-renesom-baseboard.dtsi | 10 +- dts/src/arm64/renesas/draak.dtsi | 60 +- dts/src/arm64/renesas/ebisu.dtsi | 60 +- dts/src/arm64/renesas/r8a774a1.dtsi | 6 +- dts/src/arm64/renesas/r8a774b1.dtsi | 6 +- dts/src/arm64/renesas/r8a774c0-cat874.dts | 2 +- dts/src/arm64/renesas/r8a774c0.dtsi | 8 +- dts/src/arm64/renesas/r8a774e1.dtsi | 5 +- dts/src/arm64/renesas/r8a77951.dtsi | 22 +- dts/src/arm64/renesas/r8a77960.dtsi | 22 +- dts/src/arm64/renesas/r8a77961.dtsi | 47 +- dts/src/arm64/renesas/r8a77965.dtsi | 22 +- dts/src/arm64/renesas/r8a77970.dtsi | 6 +- dts/src/arm64/renesas/r8a77980.dtsi | 6 +- dts/src/arm64/renesas/r8a77990.dtsi | 24 +- dts/src/arm64/renesas/r8a77995.dtsi | 24 +- dts/src/arm64/renesas/r8a779a0-falcon-cpu.dtsi | 12 +- dts/src/arm64/renesas/r8a779a0-falcon.dts | 24 + dts/src/arm64/renesas/r8a779a0.dtsi | 131 +- dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi | 20 + .../arm64/renesas/r8a779f0-spider-ethernet.dtsi | 15 + dts/src/arm64/renesas/r8a779f0-spider.dts | 10 + dts/src/arm64/renesas/r8a779f0.dtsi | 163 + dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi | 45 + dts/src/arm64/renesas/r8a779g0-white-hawk.dts | 22 + dts/src/arm64/renesas/r8a779g0.dtsi | 122 + dts/src/arm64/renesas/r9a07g043.dtsi | 885 +++++ dts/src/arm64/renesas/r9a07g043u11-smarc.dts | 21 + dts/src/arm64/renesas/r9a07g044.dtsi | 8 +- dts/src/arm64/renesas/r9a07g044c2-smarc.dts | 76 - dts/src/arm64/renesas/r9a07g054.dtsi | 592 ++- dts/src/arm64/renesas/r9a07g054l2-smarc.dts | 8 - dts/src/arm64/renesas/r9a09g011-v2mevk2.dts | 44 + dts/src/arm64/renesas/r9a09g011.dtsi | 93 + dts/src/arm64/renesas/rz-smarc-common.dtsi | 24 - dts/src/arm64/renesas/rzg2l-smarc.dtsi | 30 + .../arm64/renesas/rzg2lc-smarc-pinfunction.dtsi | 64 +- dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi | 61 + dts/src/arm64/renesas/rzg2lc-smarc.dtsi | 38 + .../arm64/renesas/rzg2ul-smarc-pinfunction.dtsi | 119 + dts/src/arm64/renesas/rzg2ul-smarc-som.dtsi | 251 ++ dts/src/arm64/renesas/rzg2ul-smarc.dtsi | 63 + dts/src/arm64/renesas/salvator-common.dtsi | 51 +- dts/src/arm64/renesas/ulcb-kf.dtsi | 10 +- dts/src/arm64/renesas/ulcb.dtsi | 49 + dts/src/arm64/rockchip/rk3308.dtsi | 5 +- dts/src/arm64/rockchip/rk3328.dtsi | 22 +- dts/src/arm64/rockchip/rk3368.dtsi | 2 + dts/src/arm64/rockchip/rk3399-firefly.dts | 3 +- dts/src/arm64/rockchip/rk3399-gru-chromebook.dtsi | 7 + dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi | 12 + dts/src/arm64/rockchip/rk3399-gru.dtsi | 28 + dts/src/arm64/rockchip/rk3399-hugsun-x99.dts | 3 +- dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi | 3 +- dts/src/arm64/rockchip/rk3399-leez-p710.dts | 3 +- dts/src/arm64/rockchip/rk3399-nanopi4.dtsi | 2 +- dts/src/arm64/rockchip/rk3399-op1-opp.dtsi | 25 + dts/src/arm64/rockchip/rk3399-orangepi.dts | 3 +- dts/src/arm64/rockchip/rk3399-rock-pi-4b.dts | 2 +- dts/src/arm64/rockchip/rk3399-rock-pi-4c.dts | 2 +- dts/src/arm64/rockchip/rk3399-rock960.dtsi | 3 +- dts/src/arm64/rockchip/rk3399.dtsi | 45 +- dts/src/arm64/rockchip/rk3566-pinenote.dtsi | 80 + dts/src/arm64/rockchip/rk3566-quartz64-a.dts | 41 +- dts/src/arm64/rockchip/rk3566-quartz64-b.dts | 615 ++++ dts/src/arm64/rockchip/rk3566-roc-pc.dts | 579 +++ dts/src/arm64/rockchip/rk3566-soquartz-cm4.dts | 177 + dts/src/arm64/rockchip/rk3566-soquartz.dtsi | 616 ++++ dts/src/arm64/rockchip/rk3566.dtsi | 11 + dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts | 102 + dts/src/arm64/rockchip/rk3568-evb1-v10.dts | 46 + dts/src/arm64/rockchip/rk3568-rock-3a.dts | 562 +++ dts/src/arm64/rockchip/rk3568.dtsi | 23 + dts/src/arm64/rockchip/rk356x.dtsi | 76 +- dts/src/arm64/sprd/whale2.dtsi | 4 + dts/src/arm64/synaptics/as370.dtsi | 173 - dts/src/arm64/tesla/fsd.dtsi | 10 +- dts/src/arm64/ti/k3-am62-main.dtsi | 307 ++ dts/src/arm64/ti/k3-am62-mcu.dtsi | 48 + dts/src/arm64/ti/k3-am62.dtsi | 1 + dts/src/arm64/ti/k3-am625-sk.dts | 289 ++ dts/src/arm64/ti/k3-am64-mcu.dtsi | 2 - dts/src/arm64/ti/k3-am642-sk.dts | 62 + dts/src/arm64/ti/k3-j721e-common-proc-board.dts | 77 +- dts/src/arm64/ti/k3-j721e-main.dtsi | 75 +- dts/src/arm64/ti/k3-j721e-sk.dts | 139 +- dts/src/arm64/toshiba/tmpv7708-rm-mbrc.dts | 9 - dts/src/arm64/toshiba/tmpv7708-visrobo-vrb.dts | 6 - dts/src/arm64/toshiba/tmpv7708-visrobo-vrc.dtsi | 4 - dts/src/arm64/toshiba/tmpv7708.dtsi | 96 +- dts/src/h8300/edosk2674.dts | 108 - dts/src/h8300/h8300h_sim.dts | 97 - dts/src/h8300/h8s_sim.dts | 100 - dts/src/mips/brcm/bcm97358svmb.dts | 2 +- dts/src/mips/brcm/bcm97360svmb.dts | 2 +- dts/src/mips/brcm/bcm97425svmb.dts | 2 +- dts/src/mips/ingenic/cu1000-neo.dts | 77 +- dts/src/mips/ingenic/cu1830-neo.dts | 76 +- dts/src/mips/ingenic/jz4780.dtsi | 2 +- dts/src/mips/ingenic/x1000.dtsi | 34 +- dts/src/mips/ingenic/x1830.dtsi | 55 +- dts/src/mips/mscc/jaguar2_pcb110.dts | 10 +- dts/src/mips/mscc/jaguar2_pcb111.dts | 10 +- dts/src/mips/mscc/jaguar2_pcb118.dts | 6 +- dts/src/mips/mscc/ocelot.dtsi | 4 +- dts/src/mips/mscc/ocelot_pcb120.dts | 6 +- dts/src/mips/mscc/serval_common.dtsi | 14 +- .../mips/ralink/gardena_smart_gateway_mt7688.dts | 2 +- dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts | 26 +- dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts | 30 +- dts/src/mips/ralink/mt7621.dtsi | 4 +- dts/src/powerpc/fsl/p2020si-post.dtsi | 5 + dts/src/powerpc/microwatt.dts | 2 + dts/src/riscv/microchip/microchip-mpfs-fabric.dtsi | 37 - .../riscv/microchip/microchip-mpfs-icicle-kit.dts | 161 - dts/src/riscv/microchip/microchip-mpfs.dtsi | 455 --- .../riscv/microchip/mpfs-icicle-kit-fabric.dtsi | 39 + dts/src/riscv/microchip/mpfs-icicle-kit.dts | 162 + .../riscv/microchip/mpfs-polarberry-fabric.dtsi | 16 + dts/src/riscv/microchip/mpfs-polarberry.dts | 99 + dts/src/riscv/microchip/mpfs.dtsi | 454 +++ dts/src/riscv/sifive/fu540-c000.dtsi | 3 +- 1366 files changed, 70520 insertions(+), 21334 deletions(-) create mode 100644 dts/Bindings/arm/arm,corstone1000.yaml create mode 100644 dts/Bindings/arm/bcm/brcm,bcmbca.yaml delete mode 100644 dts/Bindings/arm/freescale/fsl,layerscape-dcfg.txt delete mode 100644 dts/Bindings/arm/freescale/fsl,layerscape-scfg.txt create mode 100644 dts/Bindings/arm/hpe,gxp.yaml delete mode 100644 dts/Bindings/arm/mediatek/mediatek,apmixedsys.txt delete mode 100644 dts/Bindings/arm/mediatek/mediatek,infracfg.txt create mode 100644 dts/Bindings/arm/mediatek/mediatek,infracfg.yaml create mode 100644 dts/Bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml create mode 100644 dts/Bindings/arm/mediatek/mediatek,mt7622-wed.yaml create mode 100644 dts/Bindings/arm/mediatek/mediatek,mt8186-clock.yaml create mode 100644 dts/Bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml delete mode 100644 dts/Bindings/arm/mediatek/mediatek,topckgen.txt delete mode 100644 dts/Bindings/arm/sp810.txt create mode 100644 dts/Bindings/arm/sp810.yaml delete mode 100644 dts/Bindings/arm/spe-pmu.txt create mode 100644 dts/Bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml create mode 100644 dts/Bindings/arm/vexpress-config.yaml delete mode 100644 dts/Bindings/arm/vexpress-sysreg.txt create mode 100644 dts/Bindings/arm/vexpress-sysreg.yaml create mode 100644 dts/Bindings/bus/qcom,ssc-block-bus.yaml create mode 100644 dts/Bindings/clock/airoha,en7523-scu.yaml create mode 100644 dts/Bindings/clock/mediatek,apmixedsys.yaml create mode 100644 dts/Bindings/clock/mediatek,topckgen.yaml create mode 100644 dts/Bindings/clock/qcom,gcc-apq8084.yaml create mode 100644 dts/Bindings/clock/qcom,gcc-sc8280xp.yaml delete mode 100644 dts/Bindings/clock/qcom,rpmcc.txt create mode 100644 dts/Bindings/clock/qcom,rpmcc.yaml create mode 100644 dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml delete mode 100644 dts/Bindings/clock/renesas,h8300-div-clock.txt delete mode 100644 dts/Bindings/clock/renesas,h8s2678-pll-clock.txt delete mode 100644 dts/Bindings/clock/rockchip,px30-cru.txt create mode 100644 dts/Bindings/clock/rockchip,px30-cru.yaml delete mode 100644 dts/Bindings/clock/rockchip,rk3036-cru.txt create mode 100644 dts/Bindings/clock/rockchip,rk3036-cru.yaml delete mode 100644 dts/Bindings/clock/rockchip,rk3188-cru.txt create mode 100644 dts/Bindings/clock/rockchip,rk3188-cru.yaml delete mode 100644 dts/Bindings/clock/rockchip,rk3228-cru.txt create mode 100644 dts/Bindings/clock/rockchip,rk3228-cru.yaml delete mode 100644 dts/Bindings/clock/rockchip,rk3288-cru.txt create mode 100644 dts/Bindings/clock/rockchip,rk3288-cru.yaml delete mode 100644 dts/Bindings/clock/rockchip,rk3308-cru.txt create mode 100644 dts/Bindings/clock/rockchip,rk3308-cru.yaml delete mode 100644 dts/Bindings/clock/rockchip,rk3368-cru.txt create mode 100644 dts/Bindings/clock/rockchip,rk3368-cru.yaml delete mode 100644 dts/Bindings/clock/rockchip,rv1108-cru.txt create mode 100644 dts/Bindings/clock/rockchip,rv1108-cru.yaml create mode 100644 dts/Bindings/clock/samsung,exynosautov9-clock.yaml delete mode 100644 dts/Bindings/devfreq/rk3399_dmc.txt delete mode 100644 dts/Bindings/display/arm,hdlcd.txt create mode 100644 dts/Bindings/display/arm,hdlcd.yaml delete mode 100644 dts/Bindings/display/arm,komeda.txt create mode 100644 dts/Bindings/display/arm,komeda.yaml delete mode 100644 dts/Bindings/display/arm,malidp.txt create mode 100644 dts/Bindings/display/arm,malidp.yaml delete mode 100644 dts/Bindings/display/arm,pl11x.txt create mode 100644 dts/Bindings/display/arm,pl11x.yaml create mode 100644 dts/Bindings/display/bridge/fsl,ldb.yaml create mode 100644 dts/Bindings/display/bridge/lontium,lt9211.yaml create mode 100644 dts/Bindings/display/panel/leadtek,ltk035c5444t.yaml create mode 100644 dts/Bindings/display/rockchip/rockchip-vop2.yaml create mode 100644 dts/Bindings/dma/nvidia,tegra186-gpc-dma.yaml create mode 100644 dts/Bindings/dma/renesas,rzn1-dmamux.yaml create mode 100644 dts/Bindings/dsp/mediatek,mt8195-dsp.yaml delete mode 100644 dts/Bindings/eeprom/at24.txt create mode 100644 dts/Bindings/gnss/brcm,bcm4751.yaml delete mode 100644 dts/Bindings/gnss/mediatek.txt create mode 100644 dts/Bindings/gnss/mediatek.yaml create mode 100644 dts/Bindings/gpio/gpio-consumer-common.yaml delete mode 100644 dts/Bindings/h8300/cpu.txt create mode 100644 dts/Bindings/hwmon/microchip,lan966x.yaml create mode 100644 dts/Bindings/hwmon/nuvoton,nct6775.yaml create mode 100644 dts/Bindings/hwmon/ti,tmp401.yaml delete mode 100644 dts/Bindings/i2c/i2c-mt65xx.txt create mode 100644 dts/Bindings/i2c/i2c-mt65xx.yaml create mode 100644 dts/Bindings/i2c/qcom,i2c-geni-qcom.yaml delete mode 100644 dts/Bindings/i2c/qcom,i2c-qup.txt create mode 100644 dts/Bindings/i2c/qcom,i2c-qup.yaml delete mode 100644 dts/Bindings/i3c/cdns,i3c-master.txt create mode 100644 dts/Bindings/i3c/cdns,i3c-master.yaml delete mode 100644 dts/Bindings/i3c/snps,dw-i3c-master.txt create mode 100644 dts/Bindings/i3c/snps,dw-i3c-master.yaml create mode 100644 dts/Bindings/input/azoteq,iqs7222.yaml delete mode 100644 dts/Bindings/input/ilitek,ili2xxx.txt delete mode 100644 dts/Bindings/interrupt-controller/fsl,ls-extirq.txt create mode 100644 dts/Bindings/interrupt-controller/fsl,ls-extirq.yaml delete mode 100644 dts/Bindings/interrupt-controller/renesas,h8300h-intc.txt delete mode 100644 dts/Bindings/interrupt-controller/renesas,h8s-intc.txt create mode 100644 dts/Bindings/iommu/apple,sart.yaml create mode 100644 dts/Bindings/leds/kinetic,ktd2692.yaml delete mode 100644 dts/Bindings/leds/leds-ktd2692.txt create mode 100644 dts/Bindings/leds/leds-pwm-multicolor.yaml create mode 100644 dts/Bindings/leds/leds-qcom-lpg.yaml create mode 100644 dts/Bindings/leds/regulator-led.yaml delete mode 100644 dts/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt create mode 100644 dts/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml delete mode 100644 dts/Bindings/media/i2c/dongwoon,dw9807-vcm.txt create mode 100644 dts/Bindings/media/i2c/dongwoon,dw9807-vcm.yaml create mode 100644 dts/Bindings/memory-controllers/ingenic,nemc-peripherals.yaml delete mode 100644 dts/Bindings/memory-controllers/renesas,h8300-bsc.yaml create mode 100644 dts/Bindings/memory-controllers/rockchip,rk3399-dmc.yaml create mode 100644 dts/Bindings/mfd/mediatek,mt6360.yaml delete mode 100644 dts/Bindings/mfd/rk808.txt create mode 100644 dts/Bindings/mfd/rockchip,rk805.yaml create mode 100644 dts/Bindings/mfd/rockchip,rk808.yaml create mode 100644 dts/Bindings/mfd/rockchip,rk809.yaml create mode 100644 dts/Bindings/mfd/rockchip,rk817.yaml create mode 100644 dts/Bindings/mfd/rockchip,rk818.yaml create mode 100644 dts/Bindings/mmc/marvell,dove-sdhci.yaml create mode 100644 dts/Bindings/mmc/marvell,orion-sdio.yaml delete mode 100644 dts/Bindings/mmc/marvell,xenon-sdhci.txt create mode 100644 dts/Bindings/mmc/marvell,xenon-sdhci.yaml delete mode 100644 dts/Bindings/mmc/orion-sdio.txt delete mode 100644 dts/Bindings/mmc/sdhci-dove.txt delete mode 100644 dts/Bindings/mmc/sdhci-msm.txt create mode 100644 dts/Bindings/mmc/sdhci-msm.yaml delete mode 100644 dts/Bindings/mtd/aspeed-smc.txt delete mode 100644 dts/Bindings/mtd/common.txt delete mode 100644 dts/Bindings/mtd/elm.txt create mode 100644 dts/Bindings/mtd/ti,elm.yaml create mode 100644 dts/Bindings/net/asix,ax88178.yaml create mode 100644 dts/Bindings/net/can/ctu,ctucanfd.yaml create mode 100644 dts/Bindings/net/marvell,orion-mdio.yaml delete mode 100644 dts/Bindings/net/marvell-orion-mdio.txt create mode 100644 dts/Bindings/net/mediatek,net.yaml delete mode 100644 dts/Bindings/net/mediatek-net.txt create mode 100644 dts/Bindings/net/microchip,lan95xx.yaml create mode 100644 dts/Bindings/net/mscc,miim.yaml delete mode 100644 dts/Bindings/net/mscc-miim.txt create mode 100644 dts/Bindings/net/smsc,lan91c111.yaml delete mode 100644 dts/Bindings/net/smsc-lan91c111.txt create mode 100644 dts/Bindings/net/sunplus,sp7021-emac.yaml create mode 100644 dts/Bindings/net/wireless/silabs,wfx.yaml create mode 100644 dts/Bindings/nvme/apple,nvme-ans.yaml create mode 100644 dts/Bindings/nvmem/apple,efuses.yaml delete mode 100644 dts/Bindings/pci/qcom,pcie.txt create mode 100644 dts/Bindings/pci/qcom,pcie.yaml create mode 100644 dts/Bindings/pci/socionext,uniphier-pcie.yaml delete mode 100644 dts/Bindings/pci/uniphier-pcie.txt create mode 100644 dts/Bindings/perf/spe-pmu.yaml delete mode 100644 dts/Bindings/phy/mixel,mipi-dsi-phy.txt create mode 100644 dts/Bindings/phy/mixel,mipi-dsi-phy.yaml delete mode 100644 dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt create mode 100644 dts/Bindings/pinctrl/fsl,imx7d-pinctrl.yaml create mode 100644 dts/Bindings/pinctrl/fsl,imxrt1170.yaml create mode 100644 dts/Bindings/pinctrl/marvell,ac5-pinctrl.yaml create mode 100644 dts/Bindings/pinctrl/mediatek,pinctrl-mt6795.yaml delete mode 100644 dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt create mode 100644 dts/Bindings/pinctrl/mscc,ocelot-pinctrl.yaml delete mode 100644 dts/Bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml create mode 100644 dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml create mode 100644 dts/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml create mode 100644 dts/Bindings/pinctrl/ralink,mt7620-pinctrl.yaml create mode 100644 dts/Bindings/pinctrl/ralink,mt7621-pinctrl.yaml create mode 100644 dts/Bindings/pinctrl/ralink,rt2880-pinctrl.yaml delete mode 100644 dts/Bindings/pinctrl/ralink,rt2880-pinmux.yaml create mode 100644 dts/Bindings/pinctrl/ralink,rt305x-pinctrl.yaml create mode 100644 dts/Bindings/pinctrl/ralink,rt3883-pinctrl.yaml delete mode 100644 dts/Bindings/power/renesas,rzg2l-sysc.yaml delete mode 100644 dts/Bindings/powerpc/fsl/cache_sram.txt create mode 100644 dts/Bindings/pwm/atmel,at91sam-pwm.yaml delete mode 100644 dts/Bindings/pwm/atmel-pwm.txt create mode 100644 dts/Bindings/pwm/mediatek,pwm-disp.yaml delete mode 100644 dts/Bindings/pwm/pwm-mtk-disp.txt create mode 100644 dts/Bindings/pwm/sunplus,sp7021-pwm.yaml create mode 100644 dts/Bindings/regulator/richtek,rt5759-regulator.yaml create mode 100644 dts/Bindings/regulator/siliconmitus,sm5703-regulator.yaml create mode 100644 dts/Bindings/reserved-memory/phram.yaml create mode 100644 dts/Bindings/reset/altr,rst-mgr.yaml delete mode 100644 dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt create mode 100644 dts/Bindings/reset/amlogic,meson-axg-audio-arb.yaml delete mode 100644 dts/Bindings/reset/ath79-reset.txt delete mode 100644 dts/Bindings/reset/berlin,reset.txt delete mode 100644 dts/Bindings/reset/bitmain,bm1880-reset.txt create mode 100644 dts/Bindings/reset/bitmain,bm1880-reset.yaml delete mode 100644 dts/Bindings/reset/hisilicon,hi6220-reset.txt delete mode 100644 dts/Bindings/reset/lantiq,reset.txt create mode 100644 dts/Bindings/reset/lantiq,reset.yaml create mode 100644 dts/Bindings/reset/marvell,berlin2-reset.yaml delete mode 100644 dts/Bindings/reset/nuvoton,npcm-reset.txt create mode 100644 dts/Bindings/reset/nuvoton,npcm750-reset.yaml create mode 100644 dts/Bindings/reset/qca,ar7100-reset.yaml delete mode 100644 dts/Bindings/reset/snps,axs10x-reset.txt create mode 100644 dts/Bindings/reset/snps,axs10x-reset.yaml delete mode 100644 dts/Bindings/reset/socfpga-reset.txt delete mode 100644 dts/Bindings/reset/st,sti-picophyreset.txt delete mode 100644 dts/Bindings/reset/st,sti-powerdown.txt create mode 100644 dts/Bindings/reset/st,stih407-picophyreset.yaml create mode 100644 dts/Bindings/reset/st,stih407-powerdown.yaml create mode 100644 dts/Bindings/rtc/renesas,rzn1-rtc.yaml delete mode 100644 dts/Bindings/rtc/rtc.txt delete mode 100644 dts/Bindings/serial/qcom,msm-uartdm.txt create mode 100644 dts/Bindings/serial/qcom,msm-uartdm.yaml create mode 100644 dts/Bindings/serial/qcom,serial-geni-qcom.yaml create mode 100644 dts/Bindings/serio/arm,pl050.yaml create mode 100644 dts/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml create mode 100644 dts/Bindings/soc/fsl/fsl,layerscape-scfg.yaml create mode 100644 dts/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml create mode 100644 dts/Bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml create mode 100644 dts/Bindings/soc/intel/intel,hps-copy-engine.yaml delete mode 100644 dts/Bindings/soc/qcom/qcom,gsbi.txt create mode 100644 dts/Bindings/soc/qcom/qcom,gsbi.yaml create mode 100644 dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml delete mode 100644 dts/Bindings/soc/qcom/qcom,smd.txt create mode 100644 dts/Bindings/soc/qcom/qcom,smd.yaml delete mode 100644 dts/Bindings/soc/qcom/qcom,smp2p.txt create mode 100644 dts/Bindings/soc/qcom/qcom,smp2p.yaml delete mode 100644 dts/Bindings/soc/qcom/qcom,smsm.txt create mode 100644 dts/Bindings/soc/qcom/qcom,smsm.yaml delete mode 100644 dts/Bindings/soc/qcom/qcom,wcnss.txt create mode 100644 dts/Bindings/soc/qcom/qcom,wcnss.yaml delete mode 100644 dts/Bindings/soc/qcom/rpmh-rsc.txt create mode 100644 dts/Bindings/soc/renesas/renesas,rzg2l-sysc.yaml create mode 100644 dts/Bindings/soc/ti/wkup-m3-ipc.yaml delete mode 100644 dts/Bindings/soc/ti/wkup_m3_ipc.txt create mode 100644 dts/Bindings/sound/adi,max98396.yaml create mode 100644 dts/Bindings/sound/arm,pl041.yaml create mode 100644 dts/Bindings/sound/cirrus,cs35l45.yaml delete mode 100644 dts/Bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml delete mode 100644 dts/Bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml create mode 100644 dts/Bindings/sound/mt8195-mt6359.yaml create mode 100644 dts/Bindings/sound/nvidia,tegra186-asrc.yaml create mode 100644 dts/Bindings/sound/serial-midi.yaml delete mode 100644 dts/Bindings/sound/tas2764.yaml create mode 100644 dts/Bindings/sound/tas27xx.yaml create mode 100644 dts/Bindings/sound/wlf,wm8731.yaml create mode 100644 dts/Bindings/sound/wlf,wm8940.yaml delete mode 100644 dts/Bindings/sound/wm8731.txt create mode 100644 dts/Bindings/spi/aspeed,ast2600-fmc.yaml create mode 100644 dts/Bindings/spi/mediatek,spi-mtk-snfi.yaml delete mode 100644 dts/Bindings/spi/qcom,spi-geni-qcom.txt create mode 100644 dts/Bindings/spi/qcom,spi-geni-qcom.yaml delete mode 100644 dts/Bindings/spi/qcom,spi-qup.txt create mode 100644 dts/Bindings/spi/qcom,spi-qup.yaml delete mode 100644 dts/Bindings/spmi/qcom,spmi-pmic-arb.txt create mode 100644 dts/Bindings/spmi/qcom,spmi-pmic-arb.yaml delete mode 100644 dts/Bindings/staging/net/wireless/silabs,wfx.yaml create mode 100644 dts/Bindings/thermal/ti,j72xx-thermal.yaml create mode 100644 dts/Bindings/timer/hpe,gxp-timer.yaml delete mode 100644 dts/Bindings/timer/rda,8810pl-timer.txt create mode 100644 dts/Bindings/timer/rda,8810pl-timer.yaml delete mode 100644 dts/Bindings/timer/renesas,16bit-timer.txt delete mode 100644 dts/Bindings/timer/renesas,8bit-timer.txt create mode 100644 dts/Bindings/timer/ti,timer-dm.yaml delete mode 100644 dts/Bindings/timer/ti,timer.txt create mode 100644 dts/Bindings/timer/xlnx,xps-timer.yaml create mode 100644 dts/Bindings/timestamp/hardware-timestamps-common.yaml create mode 100644 dts/Bindings/timestamp/hte-consumer.yaml create mode 100644 dts/Bindings/timestamp/nvidia,tegra194-hte.yaml create mode 100644 dts/Bindings/usb/fcs,fsa4480.yaml create mode 100644 dts/Bindings/usb/ti,am62-usb.yaml delete mode 100644 dts/Bindings/watchdog/faraday,ftwdt010.txt create mode 100644 dts/Bindings/watchdog/faraday,ftwdt010.yaml create mode 100644 dts/Bindings/watchdog/sunplus,sp7021-wdt.yaml create mode 100644 dts/include/dt-bindings/clock/en7523-clk.h create mode 100644 dts/include/dt-bindings/clock/mt8186-clk.h create mode 100644 dts/include/dt-bindings/clock/qcom,gcc-sc8280xp.h create mode 100644 dts/include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h create mode 100644 dts/include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h create mode 100644 dts/include/dt-bindings/clock/r8a779g0-cpg-mssr.h create mode 100644 dts/include/dt-bindings/clock/r9a07g043-cpg.h create mode 100644 dts/include/dt-bindings/clock/r9a09g011-cpg.h create mode 100644 dts/include/dt-bindings/clock/samsung,exynosautov9.h create mode 100644 dts/include/dt-bindings/clock/ste-db8500-clkout.h create mode 100644 dts/include/dt-bindings/clock/stm32mp13-clks.h create mode 100644 dts/include/dt-bindings/gce/mt8186-gce.h create mode 100644 dts/include/dt-bindings/interconnect/qcom,sc8280xp.h create mode 100644 dts/include/dt-bindings/interconnect/qcom,sdx65.h create mode 100644 dts/include/dt-bindings/memory/mt8186-memory-port.h create mode 100644 dts/include/dt-bindings/memory/mt8195-memory-port.h create mode 100644 dts/include/dt-bindings/mfd/cros_ec.h create mode 100644 dts/include/dt-bindings/pinctrl/mt6795-pinfunc.h create mode 100644 dts/include/dt-bindings/power/r8a779g0-sysc.h create mode 100644 dts/include/dt-bindings/reset/amlogic,meson-s4-reset.h create mode 100644 dts/include/dt-bindings/reset/mt7986-resets.h create mode 100644 dts/include/dt-bindings/reset/mt8186-resets.h create mode 100644 dts/include/dt-bindings/reset/stm32mp13-resets.h create mode 100644 dts/include/dt-bindings/soc/rockchip,vop2.h create mode 100644 dts/include/dt-bindings/sound/cs35l45.h create mode 100644 dts/src/arm/aspeed-bmc-nuvia-dc-scm.dts create mode 100644 dts/src/arm/bcm4708-buffalo-wzr-1166dhp-common.dtsi create mode 100644 dts/src/arm/bcm4708-buffalo-wzr-1166dhp.dts create mode 100644 dts/src/arm/bcm4708-buffalo-wzr-1166dhp2.dts create mode 100644 dts/src/arm/bcm47622.dtsi create mode 100644 dts/src/arm/bcm947622.dts create mode 100644 dts/src/arm/hpe-bmc-dl360gen10.dts create mode 100644 dts/src/arm/hpe-gxp.dtsi create mode 100644 dts/src/arm/imx6dl-colibri-aster.dts create mode 100644 dts/src/arm/imx6dl-colibri-iris-v2.dts create mode 100644 dts/src/arm/imx6dl-colibri-iris.dts delete mode 100644 dts/src/arm/imx6dl-colibri-v1_1-eval-v3.dts create mode 100644 dts/src/arm/imx6q-bosch-acc.dts delete mode 100644 dts/src/arm/imx6qdl-colibri-v1_1-uhs.dtsi create mode 100644 dts/src/arm/imx6qdl-vicut1-12inch.dtsi create mode 100644 dts/src/arm/imx6ul-tqma6ul-common.dtsi create mode 100644 dts/src/arm/imx6ul-tqma6ul1-mba6ulx.dts create mode 100644 dts/src/arm/imx6ul-tqma6ul1.dtsi create mode 100644 dts/src/arm/imx6ul-tqma6ul2-mba6ulx.dts create mode 100644 dts/src/arm/imx6ul-tqma6ul2.dtsi create mode 100644 dts/src/arm/imx6ul-tqma6ul2l-mba6ulx.dts create mode 100644 dts/src/arm/imx6ul-tqma6ul2l.dtsi create mode 100644 dts/src/arm/imx6ul-tqma6ulx-common.dtsi create mode 100644 dts/src/arm/imx6ul-tqma6ulxl-common.dtsi create mode 100644 dts/src/arm/imx6ull-colibri-aster.dts create mode 100644 dts/src/arm/imx6ull-colibri-aster.dtsi create mode 100644 dts/src/arm/imx6ull-colibri-emmc-aster.dts create mode 100644 dts/src/arm/imx6ull-colibri-emmc-iris-v2.dts create mode 100644 dts/src/arm/imx6ull-colibri-emmc-iris.dts create mode 100644 dts/src/arm/imx6ull-colibri-iris-v2.dts create mode 100644 dts/src/arm/imx6ull-colibri-iris-v2.dtsi create mode 100644 dts/src/arm/imx6ull-colibri-iris.dts create mode 100644 dts/src/arm/imx6ull-colibri-iris.dtsi create mode 100644 dts/src/arm/imx6ull-colibri-wifi-aster.dts create mode 100644 dts/src/arm/imx6ull-colibri-wifi-iris-v2.dts create mode 100644 dts/src/arm/imx6ull-colibri-wifi-iris.dts create mode 100644 dts/src/arm/imx6ull-phytec-tauri-emmc.dts create mode 100644 dts/src/arm/imx6ull-phytec-tauri-nand.dts create mode 100644 dts/src/arm/imx6ull-phytec-tauri.dtsi create mode 100644 dts/src/arm/imx6ull-tqma6ull2-mba6ulx.dts create mode 100644 dts/src/arm/imx6ull-tqma6ull2.dtsi create mode 100644 dts/src/arm/imx6ull-tqma6ull2l-mba6ulx.dts create mode 100644 dts/src/arm/imx6ull-tqma6ull2l.dtsi create mode 100644 dts/src/arm/imx7d-smegw01.dts create mode 100644 dts/src/arm/imxrt1050-evk.dts create mode 100644 dts/src/arm/imxrt1050.dtsi create mode 100644 dts/src/arm/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts create mode 100644 dts/src/arm/lan966x-kontron-kswitch-d10-mmt-8g.dts create mode 100644 dts/src/arm/lan966x-kontron-kswitch-d10-mmt.dtsi create mode 100644 dts/src/arm/ls1021a-iot.dts create mode 100644 dts/src/arm/mba6ulx.dtsi create mode 100644 dts/src/arm/qcom-apq8026-asus-sparrow.dts create mode 100644 dts/src/arm/qcom-apq8064-sony-xperia-lagan-yuga.dts delete mode 100644 dts/src/arm/qcom-apq8064-sony-xperia-yuga.dts delete mode 100644 dts/src/arm/qcom-msm8974-fairphone-fp2.dts delete mode 100644 dts/src/arm/qcom-msm8974-samsung-klte.dts delete mode 100644 dts/src/arm/qcom-msm8974-sony-xperia-amami.dts delete mode 100644 dts/src/arm/qcom-msm8974-sony-xperia-castor.dts delete mode 100644 dts/src/arm/qcom-msm8974-sony-xperia-honami.dts create mode 100644 dts/src/arm/qcom-msm8974-sony-xperia-rhine-amami.dts create mode 100644 dts/src/arm/qcom-msm8974-sony-xperia-rhine-honami.dts create mode 100644 dts/src/arm/qcom-msm8974-sony-xperia-rhine.dtsi create mode 100644 dts/src/arm/qcom-msm8974pro-fairphone-fp2.dts create mode 100644 dts/src/arm/qcom-msm8974pro-samsung-klte.dts create mode 100644 dts/src/arm/qcom-msm8974pro-sony-xperia-shinano-castor.dts create mode 100644 dts/src/arm/qcom-pmx65.dtsi create mode 100644 dts/src/arm/ste-ux500-samsung-codina-tmo.dts create mode 100644 dts/src/arm/stm32mp151a-prtt1a.dts create mode 100644 dts/src/arm/stm32mp151a-prtt1c.dts create mode 100644 dts/src/arm/stm32mp151a-prtt1l.dtsi create mode 100644 dts/src/arm/stm32mp151a-prtt1s.dts create mode 100644 dts/src/arm/stm32mp157a-dk1-scmi.dts create mode 100644 dts/src/arm/stm32mp157c-dk2-scmi.dts create mode 100644 dts/src/arm/stm32mp157c-ed1-scmi.dts create mode 100644 dts/src/arm/stm32mp157c-ev1-scmi.dts create mode 100644 dts/src/arm64/arm/corstone1000-fvp.dts create mode 100644 dts/src/arm64/arm/corstone1000-mps3.dts create mode 100644 dts/src/arm64/arm/corstone1000.dtsi create mode 100644 dts/src/arm64/freescale/imx8-ss-vpu.dtsi create mode 100644 dts/src/arm64/freescale/imx8mm-data-modul-edm-sbc.dts create mode 100644 dts/src/arm64/freescale/imx8mm-mx8menlo.dts create mode 100644 dts/src/arm64/freescale/imx8mn-ddr3l-evk.dts create mode 100644 dts/src/arm64/freescale/imx8mp-icore-mx8mp-edimm2.2.dts create mode 100644 dts/src/arm64/freescale/imx8mp-icore-mx8mp.dtsi create mode 100644 dts/src/arm64/freescale/imx8mp-venice-gw74xx.dts create mode 100644 dts/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi create mode 100644 dts/src/arm64/freescale/imx8mp-verdin-dev.dtsi create mode 100644 dts/src/arm64/freescale/imx8mp-verdin-nonwifi-dahlia.dts create mode 100644 dts/src/arm64/freescale/imx8mp-verdin-nonwifi-dev.dts create mode 100644 dts/src/arm64/freescale/imx8mp-verdin-nonwifi.dtsi create mode 100644 dts/src/arm64/freescale/imx8mp-verdin-wifi-dahlia.dts create mode 100644 dts/src/arm64/freescale/imx8mp-verdin-wifi-dev.dts create mode 100644 dts/src/arm64/freescale/imx8mp-verdin-wifi.dtsi create mode 100644 dts/src/arm64/freescale/imx8mp-verdin.dtsi create mode 100644 dts/src/arm64/intel/socfpga_agilex_n6000.dts create mode 100644 dts/src/arm64/mediatek/mt6359.dtsi create mode 100644 dts/src/arm64/mediatek/mt8195-demo.dts create mode 100644 dts/src/arm64/mediatek/mt8195-evb.dts create mode 100644 dts/src/arm64/mediatek/mt8195.dtsi create mode 100644 dts/src/arm64/qcom/pm8450.dtsi create mode 100644 dts/src/arm64/qcom/sc7280-crd-r3.dts delete mode 100644 dts/src/arm64/qcom/sc7280-crd.dts create mode 100644 dts/src/arm64/qcom/sc7280-herobrine-crd.dts delete mode 100644 dts/src/arm64/qcom/sc7280-herobrine-herobrine-r0.dts create mode 100644 dts/src/arm64/qcom/sc7280-herobrine-villager-r0.dts create mode 100644 dts/src/arm64/renesas/r8a779f0-spider-ethernet.dtsi create mode 100644 dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi create mode 100644 dts/src/arm64/renesas/r8a779g0-white-hawk.dts create mode 100644 dts/src/arm64/renesas/r8a779g0.dtsi create mode 100644 dts/src/arm64/renesas/r9a07g043.dtsi create mode 100644 dts/src/arm64/renesas/r9a07g043u11-smarc.dts create mode 100644 dts/src/arm64/renesas/r9a09g011-v2mevk2.dts create mode 100644 dts/src/arm64/renesas/r9a09g011.dtsi create mode 100644 dts/src/arm64/renesas/rzg2ul-smarc-pinfunction.dtsi create mode 100644 dts/src/arm64/renesas/rzg2ul-smarc-som.dtsi create mode 100644 dts/src/arm64/renesas/rzg2ul-smarc.dtsi create mode 100644 dts/src/arm64/rockchip/rk3566-quartz64-b.dts create mode 100644 dts/src/arm64/rockchip/rk3566-roc-pc.dts create mode 100644 dts/src/arm64/rockchip/rk3566-soquartz-cm4.dts create mode 100644 dts/src/arm64/rockchip/rk3566-soquartz.dtsi create mode 100644 dts/src/arm64/rockchip/rk3568-rock-3a.dts delete mode 100644 dts/src/arm64/synaptics/as370.dtsi delete mode 100644 dts/src/h8300/edosk2674.dts delete mode 100644 dts/src/h8300/h8300h_sim.dts delete mode 100644 dts/src/h8300/h8s_sim.dts delete mode 100644 dts/src/riscv/microchip/microchip-mpfs-fabric.dtsi delete mode 100644 dts/src/riscv/microchip/microchip-mpfs-icicle-kit.dts delete mode 100644 dts/src/riscv/microchip/microchip-mpfs.dtsi create mode 100644 dts/src/riscv/microchip/mpfs-icicle-kit-fabric.dtsi create mode 100644 dts/src/riscv/microchip/mpfs-icicle-kit.dts create mode 100644 dts/src/riscv/microchip/mpfs-polarberry-fabric.dtsi create mode 100644 dts/src/riscv/microchip/mpfs-polarberry.dts create mode 100644 dts/src/riscv/microchip/mpfs.dtsi diff --git a/dts/Bindings/arm/arm,corstone1000.yaml b/dts/Bindings/arm/arm,corstone1000.yaml new file mode 100644 index 0000000000..a77f882238 --- /dev/null +++ b/dts/Bindings/arm/arm,corstone1000.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,corstone1000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Corstone1000 Device Tree Bindings + +maintainers: + - Vishnu Banavath + - Rui Miguel Silva + +description: |+ + ARM's Corstone1000 includes pre-verified Corstone SSE-710 subsystem that + provides a flexible compute architecture that combines Cortex‑A and Cortex‑M + processors. + + Support for Cortex‑A32, Cortex‑A35 and Cortex‑A53 processors. Two expansion + systems for M-Class (or other) processors for adding sensors, connectivity, + video, audio and machine learning at the edge System and security IPs to build + a secure SoC for a range of rich IoT applications, for example gateways, smart + cameras and embedded systems. + + Integrated Secure Enclave providing hardware Root of Trust and supporting + seamless integration of the optional CryptoCell™-312 cryptographic + accelerator. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Corstone1000 MPS3 it has 1 Cortex-A35 CPU core in a FPGA + implementation of the Corstone1000 in the MPS3 prototyping board. See + ARM document DAI0550. + items: + - const: arm,corstone1000-mps3 + - description: Corstone1000 FVP is the Fixed Virtual Platform + implementation of this system. See ARM ecosystems FVP's. + items: + - const: arm,corstone1000-fvp + +additionalProperties: true + +... diff --git a/dts/Bindings/arm/bcm/brcm,bcm4708.yaml b/dts/Bindings/arm/bcm/brcm,bcm4708.yaml index 434d3c6db6..8b7e87fb6c 100644 --- a/dts/Bindings/arm/bcm/brcm,bcm4708.yaml +++ b/dts/Bindings/arm/bcm/brcm,bcm4708.yaml @@ -64,6 +64,7 @@ properties: - description: BCM47094 based boards items: - enum: + - asus,rt-ac88u - dlink,dir-885l - linksys,panamera - luxul,abr-4500-v1 @@ -83,9 +84,14 @@ properties: - brcm,bcm953012er - brcm,bcm953012hr - brcm,bcm953012k + - const: brcm,bcm53012 + - const: brcm,bcm4708 + + - description: BCM53016 based boards + items: + - enum: - meraki,mr32 - - const: brcm,brcm53012 - - const: brcm,brcm53016 + - const: brcm,bcm53016 - const: brcm,bcm4708 additionalProperties: true diff --git a/dts/Bindings/arm/bcm/brcm,bcm63138.txt b/dts/Bindings/arm/bcm/brcm,bcm63138.txt index 8c7a4908a8..a8866c6e9d 100644 --- a/dts/Bindings/arm/bcm/brcm,bcm63138.txt +++ b/dts/Bindings/arm/bcm/brcm,bcm63138.txt @@ -30,7 +30,7 @@ Example: cpus { cpu@0 { - compatible = "arm,cotex-a9"; + compatible = "arm,cortex-a9"; reg = <0>; ... enable-method = "brcm,bcm63138"; diff --git a/dts/Bindings/arm/bcm/brcm,bcmbca.yaml b/dts/Bindings/arm/bcm/brcm,bcmbca.yaml new file mode 100644 index 0000000000..5fb4558404 --- /dev/null +++ b/dts/Bindings/arm/bcm/brcm,bcmbca.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcmbca.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Broadband SoC device tree bindings + +description: + Broadcom Broadband SoCs include family of high performance DSL/PON/Wireless + chips that can be used as home gateway, router and WLAN AP for residential, + enterprise and carrier applications. + +maintainers: + - William Zhang + - Anand Gore + - Kursad Oney + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM47622 based boards + items: + - enum: + - brcm,bcm947622 + - const: brcm,bcm47622 + - const: brcm,bcmbca + +additionalProperties: true + +... diff --git a/dts/Bindings/arm/freescale/fsl,layerscape-dcfg.txt b/dts/Bindings/arm/freescale/fsl,layerscape-dcfg.txt deleted file mode 100644 index 10a91cc8b9..0000000000 --- a/dts/Bindings/arm/freescale/fsl,layerscape-dcfg.txt +++ /dev/null @@ -1,19 +0,0 @@ -Freescale DCFG - -DCFG is the device configuration unit, that provides general purpose -configuration and status for the device. Such as setting the secondary -core start address and release the secondary core from holdoff and startup. - -Required properties: - - compatible: Should contain a chip-specific compatible string, - Chip-specific strings are of the form "fsl,-dcfg", - The following s are known to be supported: - ls1012a, ls1021a, ls1043a, ls1046a, ls2080a, lx2160a - - - reg : should contain base address and length of DCFG memory-mapped registers - -Example: - dcfg: dcfg@1ee0000 { - compatible = "fsl,ls1021a-dcfg"; - reg = <0x0 0x1ee0000 0x0 0x10000>; - }; diff --git a/dts/Bindings/arm/freescale/fsl,layerscape-scfg.txt b/dts/Bindings/arm/freescale/fsl,layerscape-scfg.txt deleted file mode 100644 index 0ab67b0b21..0000000000 --- a/dts/Bindings/arm/freescale/fsl,layerscape-scfg.txt +++ /dev/null @@ -1,19 +0,0 @@ -Freescale SCFG - -SCFG is the supplemental configuration unit, that provides SoC specific -configuration and status registers for the chip. Such as getting PEX port -status. - -Required properties: - - compatible: Should contain a chip-specific compatible string, - Chip-specific strings are of the form "fsl,-scfg", - The following s are known to be supported: - ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. - - - reg: should contain base address and length of SCFG memory-mapped registers - -Example: - scfg: scfg@1570000 { - compatible = "fsl,ls1021a-scfg"; - reg = <0x0 0x1570000 0x0 0x10000>; - }; diff --git a/dts/Bindings/arm/fsl.yaml b/dts/Bindings/arm/fsl.yaml index 08bdd30e51..ef524378d4 100644 --- a/dts/Bindings/arm/fsl.yaml +++ b/dts/Bindings/arm/fsl.yaml @@ -172,7 +172,7 @@ properties: - karo,tx53 # Ka-Ro electronics TX53 module - kiebackpeter,imx53-ddc # K+P imx53 DDC - kiebackpeter,imx53-hsc # K+P imx53 HSC - - menlo,m53menlo + - menlo,m53menlo # i.MX53 Menlo board - voipac,imx53-dmm-668 # Voipac i.MX53 X53-DMM-668 - const: fsl,imx53 @@ -192,6 +192,7 @@ properties: items: - enum: - auvidea,h100 # Auvidea H100 + - bosch,imx6q-acc # Bosch ACC i.MX6 Dual - boundary,imx6q-nitrogen6_max - boundary,imx6q-nitrogen6_som2 - boundary,imx6q-nitrogen6x @@ -411,7 +412,6 @@ properties: - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 - toradex,colibri_imx6dl # Colibri iMX6 Modules - - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 V1.1 Modules - udoo,imx6dl-udoo # Udoo i.MX6 Dual-lite Board - vdl,lanmcu # Van der Laan LANMCU board - wand,imx6dl-wandboard # Wandboard i.MX6 Dual Lite Board @@ -488,17 +488,13 @@ properties: - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules items: - enum: + - toradex,colibri_imx6dl-aster # Colibri iMX6DL/S Module on Aster Board - toradex,colibri_imx6dl-eval-v3 # Colibri iMX6DL/S Module on Colibri Evaluation Board V3 + - toradex,colibri_imx6dl-iris # Colibri iMX6DL/S Module on Iris Board + - toradex,colibri_imx6dl-iris-v2 # Colibri iMX6DL/S Module on Iris Board V2 - const: toradex,colibri_imx6dl # Colibri iMX6DL/S Module - const: fsl,imx6dl - - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S V1.1 Modules - items: - - enum: - - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6DL/S V1.1 M. on Colibri Evaluation Board V3 - - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6DL/S V1.1 Module - - const: fsl,imx6dl - - description: i.MX6S DHCOM DRC02 Board items: - const: dh,imx6s-dhcom-drc02 @@ -613,6 +609,28 @@ properties: - const: kontron,imx6ul-n6310-som - const: fsl,imx6ul + - description: TQ-Systems TQMa6UL1 SoM on MBa6ULx board + items: + - enum: + - tq,imx6ul-tqma6ul1-mba6ulx + - const: tq,imx6ul-tqma6ul1 # MCIMX6G1 + - const: fsl,imx6ul + + - description: TQ-Systems TQMa6UL2 SoM on MBa6ULx board + items: + - enum: + - tq,imx6ul-tqma6ul2-mba6ulx + - const: tq,imx6ul-tqma6ul2 # MCIMX6G2 + - const: fsl,imx6ul + + - description: TQ-Systems TQMa6ULxL SoM on MBa6ULx[L] board + items: + - enum: + - tq,imx6ul-tqma6ul2l-mba6ulx # using LGA adapter + - tq,imx6ul-tqma6ul2l-mba6ulxl + - const: tq,imx6ul-tqma6ul2l # MCIMX6G2, LGA SoM variant + - const: fsl,imx6ul + - description: i.MX6ULL based Boards items: - enum: @@ -640,26 +658,44 @@ properties: - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL - const: fsl,imx6ull + - description: i.MX6ULL PHYTEC phyGATE-Tauri + items: + - enum: + - phytec,imx6ull-phygate-tauri-emmc + - phytec,imx6ull-phygate-tauri-nand + - const: phytec,imx6ull-phygate-tauri # PHYTEC phyGATE-Tauri with i.MX6 ULL + - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL + - const: fsl,imx6ull + - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules items: - enum: - - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board + - toradex,colibri-imx6ull-aster # Colibri iMX6ULL Module on Aster Carrier Board + - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board V3 + - toradex,colibri-imx6ull-iris # Colibri iMX6ULL Module on Iris Carrier Board + - toradex,colibri-imx6ull-iris-v2 # Colibri iMX6ULL Module on Iris V2 Carrier Board - const: toradex,colibri-imx6ull # Colibri iMX6ULL Module - - const: fsl,imx6dl + - const: fsl,imx6ull - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module items: - enum: - - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1GB (eMMC) M. on Colibri Evaluation Board - - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module - - const: fsl,imx6dl + - toradex,colibri-imx6ull-emmc-aster # Colibri iMX6ULL 1G (eMMC) on Aster Carrier Board + - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1G (eMMC) on Colibri Evaluation B. V3 + - toradex,colibri-imx6ull-emmc-iris # Colibri iMX6ULL 1G (eMMC) on Iris Carrier Board + - toradex,colibri-imx6ull-emmc-iris-v2 # Colibri iMX6ULL 1G (eMMC) on Iris V2 Carrier Board + - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module + - const: fsl,imx6ull - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules items: - enum: - - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Evaluation Board - - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module - - const: fsl,imx6dl + - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Eval. B. V3 + - toradex,colibri-imx6ull-wifi-aster # Colibri iMX6ULL Wi-Fi / BT M. on Aster Carrier Board + - toradex,colibri-imx6ull-wifi-iris # Colibri iMX6ULL Wi-Fi / BT M. on Iris Carrier Board + - toradex,colibri-imx6ull-wifi-iris-v2 # Colibri iMX6ULL Wi-Fi / BT M. on Iris V2 Carrier Board + - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module + - const: fsl,imx6ull - description: Kontron N6411 S Board items: @@ -667,6 +703,21 @@ properties: - const: kontron,imx6ull-n6411-som - const: fsl,imx6ull + - description: TQ Systems TQMa6ULLx SoM on MBa6ULx board + items: + - enum: + - tq,imx6ull-tqma6ull2-mba6ulx + - const: tq,imx6ull-tqma6ull2 # MCIMX6Y2 + - const: fsl,imx6ull + + - description: TQ Systems TQMa6ULLxL SoM on MBa6ULx[L] board + items: + - enum: + - tq,imx6ull-tqma6ull2l-mba6ulx # using LGA adapter + - tq,imx6ull-tqma6ull2l-mba6ulxl + - const: tq,imx6ull-tqma6ull2l # MCIMX6Y2, LGA SoM variant + - const: fsl,imx6ull + - description: i.MX6ULZ based Boards items: - enum: @@ -707,6 +758,7 @@ properties: - kam,imx7d-flex-concentrator-mfg # Kamstrup OMNIA Flex Concentrator in manufacturing mode - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board - remarkable,imx7d-remarkable2 # i.MX7D ReMarkable 2 E-Ink Tablet + - storopack,imx7d-smegw01 # Storopack i.MX7D SMEGW01 - technexion,imx7d-pico-dwarf # TechNexion i.MX7D Pico-Dwarf - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph @@ -762,6 +814,7 @@ properties: - enum: - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit - boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board + - dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board @@ -772,6 +825,7 @@ properties: - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board - gw,imx8mm-gw7903 # i.MX8MM Gateworks Board - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM + - menlo,mx8menlo # i.MX8MM Menlo board with Verdin SoM - toradex,verdin-imx8mm # Verdin iMX8M Mini Modules - toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Modules without Wi-Fi / BT - toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Modules @@ -834,6 +888,7 @@ properties: - beacon,imx8mn-beacon-kit # i.MX8MN Beacon Development Kit - bsh,imx8mn-bsh-smm-s2 # i.MX8MN BSH SystemMaster S2 - bsh,imx8mn-bsh-smm-s2pro # i.MX8MN BSH SystemMaster S2 PRO + - fsl,imx8mn-ddr3l-evk # i.MX8MN DDR3L EVK Board - fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board - fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board - gw,imx8mn-gw7902 # i.MX8MM Gateworks Board @@ -860,6 +915,17 @@ properties: items: - enum: - fsl,imx8mp-evk # i.MX8MP EVK Board + - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board + - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules + - toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Modules without Wi-Fi / BT + - toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Modules + - const: fsl,imx8mp + + - description: Engicam i.Core MX8M Plus SoM based boards + items: + - enum: + - engicam,icore-mx8mp-edimm2.2 # i.MX8MP Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit + - const: engicam,icore-mx8mp # i.MX8MP Engicam i.Core MX8M Plus SoM - const: fsl,imx8mp - description: PHYTEC phyCORE-i.MX8MP SoM based boards @@ -868,6 +934,24 @@ properties: - const: phytec,imx8mp-phycore-som # phyCORE-i.MX8MP SoM - const: fsl,imx8mp + - description: Toradex Boards with Verdin iMX8M Plus Modules + items: + - enum: + - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia + - toradex,verdin-imx8mp-nonwifi-dev # Verdin iMX8M Plus Module on Verdin Development Board + - const: toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Module without Wi-Fi / BT + - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module + - const: fsl,imx8mp + + - description: Toradex Boards with Verdin iMX8M Plus Wi-Fi / BT Modules + items: + - enum: + - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia + - toradex,verdin-imx8mp-wifi-dev # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B. + - const: toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Module + - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module + - const: fsl,imx8mp + - description: i.MX8MQ based Boards items: - enum: @@ -999,6 +1083,7 @@ properties: - description: LS1021A based Boards items: - enum: + - fsl,ls1021a-iot - fsl,ls1021a-moxa-uc-8410a - fsl,ls1021a-qds - fsl,ls1021a-tsn diff --git a/dts/Bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/dts/Bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml index 7378159e61..483caf0ce2 100644 --- a/dts/Bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml +++ b/dts/Bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml @@ -17,14 +17,15 @@ properties: - const: hisilicon,hip04-bootwrapper boot-method: + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Address and size of boot method. [0]: bootwrapper physical address [1]: bootwrapper size [2]: relocation physical address [3]: relocation size - minItems: 1 - maxItems: 2 + minItems: 2 + maxItems: 4 required: - compatible diff --git a/dts/Bindings/arm/hpe,gxp.yaml b/dts/Bindings/arm/hpe,gxp.yaml new file mode 100644 index 0000000000..224bbcb93f --- /dev/null +++ b/dts/Bindings/arm/hpe,gxp.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hpe,gxp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HPE BMC GXP platforms + +maintainers: + - Nick Hawkins + - Jean-Marie Verdun + +properties: + compatible: + oneOf: + - description: GXP Based Boards + items: + - enum: + - hpe,gxp-dl360gen10 + - const: hpe,gxp + +required: + - compatible + +additionalProperties: true + +... diff --git a/dts/Bindings/arm/intel,socfpga.yaml b/dts/Bindings/arm/intel,socfpga.yaml index 6e043459fc..61a454a40e 100644 --- a/dts/Bindings/arm/intel,socfpga.yaml +++ b/dts/Bindings/arm/intel,socfpga.yaml @@ -18,6 +18,7 @@ properties: items: - enum: - intel,n5x-socdk + - intel,socfpga-agilex-n6000 - intel,socfpga-agilex-socdk - const: intel,socfpga-agilex diff --git a/dts/Bindings/arm/mediatek.yaml b/dts/Bindings/arm/mediatek.yaml index ab0593c773..4a2bd9759c 100644 --- a/dts/Bindings/arm/mediatek.yaml +++ b/dts/Bindings/arm/mediatek.yaml @@ -133,6 +133,11 @@ properties: - const: mediatek,mt8183 - items: - enum: + - mediatek,mt8192-evb + - const: mediatek,mt8192 + - items: + - enum: + - mediatek,mt8195-demo - mediatek,mt8195-evb - const: mediatek,mt8195 - description: Google Burnet (HP Chromebook x360 11MK G3 EE) diff --git a/dts/Bindings/arm/mediatek/mediatek,apmixedsys.txt b/dts/Bindings/arm/mediatek/mediatek,apmixedsys.txt deleted file mode 100644 index 3fa7558665..0000000000 --- a/dts/Bindings/arm/mediatek/mediatek,apmixedsys.txt +++ /dev/null @@ -1,35 +0,0 @@ -Mediatek apmixedsys controller -============================== - -The Mediatek apmixedsys controller provides the PLLs to the system. - -Required Properties: - -- compatible: Should be one of: - - "mediatek,mt2701-apmixedsys" - - "mediatek,mt2712-apmixedsys", "syscon" - - "mediatek,mt6765-apmixedsys", "syscon" - - "mediatek,mt6779-apmixedsys", "syscon" - - "mediatek,mt6797-apmixedsys" - - "mediatek,mt7622-apmixedsys" - - "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys" - - "mediatek,mt7629-apmixedsys" - - "mediatek,mt7986-apmixedsys" - - "mediatek,mt8135-apmixedsys" - - "mediatek,mt8167-apmixedsys", "syscon" - - "mediatek,mt8173-apmixedsys" - - "mediatek,mt8183-apmixedsys", "syscon" - - "mediatek,mt8516-apmixedsys" -- #clock-cells: Must be 1 - -The apmixedsys controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Example: - -apmixedsys: clock-controller@10209000 { - compatible = "mediatek,mt8173-apmixedsys"; - reg = <0 0x10209000 0 0x1000>; - #clock-cells = <1>; -}; diff --git a/dts/Bindings/arm/mediatek/mediatek,infracfg.txt b/dts/Bindings/arm/mediatek/mediatek,infracfg.txt deleted file mode 100644 index f66bd72057..0000000000 --- a/dts/Bindings/arm/mediatek/mediatek,infracfg.txt +++ /dev/null @@ -1,42 +0,0 @@ -Mediatek infracfg controller -============================ - -The Mediatek infracfg controller provides various clocks and reset -outputs to the system. - -Required Properties: - -- compatible: Should be one of: - - "mediatek,mt2701-infracfg", "syscon" - - "mediatek,mt2712-infracfg", "syscon" - - "mediatek,mt6765-infracfg", "syscon" - - "mediatek,mt6779-infracfg_ao", "syscon" - - "mediatek,mt6797-infracfg", "syscon" - - "mediatek,mt7622-infracfg", "syscon" - - "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon" - - "mediatek,mt7629-infracfg", "syscon" - - "mediatek,mt7986-infracfg", "syscon" - - "mediatek,mt8135-infracfg", "syscon" - - "mediatek,mt8167-infracfg", "syscon" - - "mediatek,mt8173-infracfg", "syscon" - - "mediatek,mt8183-infracfg", "syscon" - - "mediatek,mt8516-infracfg", "syscon" -- #clock-cells: Must be 1 -- #reset-cells: Must be 1 - -The infracfg controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. -Also it uses the common reset controller binding from -Documentation/devicetree/bindings/reset/reset.txt. -The available reset outputs are defined in -dt-bindings/reset/mt*-resets.h - -Example: - -infracfg: power-controller@10001000 { - compatible = "mediatek,mt8173-infracfg", "syscon"; - reg = <0 0x10001000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; -}; diff --git a/dts/Bindings/arm/mediatek/mediatek,infracfg.yaml b/dts/Bindings/arm/mediatek/mediatek,infracfg.yaml new file mode 100644 index 0000000000..8681b785ed --- /dev/null +++ b/dts/Bindings/arm/mediatek/mediatek,infracfg.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek Infrastructure System Configuration Controller + +maintainers: + - Matthias Brugger + +description: + The Mediatek infracfg controller provides various clocks and reset outputs + to the system. The clock values can be found in , + and reset values in and + . + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-infracfg + - mediatek,mt2712-infracfg + - mediatek,mt6765-infracfg + - mediatek,mt6779-infracfg_ao + - mediatek,mt6797-infracfg + - mediatek,mt7622-infracfg + - mediatek,mt7629-infracfg + - mediatek,mt7986-infracfg + - mediatek,mt8135-infracfg + - mediatek,mt8167-infracfg + - mediatek,mt8173-infracfg + - mediatek,mt8183-infracfg + - mediatek,mt8516-infracfg + - const: syscon + - items: + - const: mediatek,mt7623-infracfg + - const: mediatek,mt2701-infracfg + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +if: + properties: + compatible: + contains: + enum: + - mediatek,mt2701-infracfg + - mediatek,mt2712-infracfg + - mediatek,mt7622-infracfg + - mediatek,mt7986-infracfg + - mediatek,mt8135-infracfg + - mediatek,mt8173-infracfg + - mediatek,mt8183-infracfg +then: + required: + - '#reset-cells' + +additionalProperties: false + +examples: + - | + infracfg: clock-controller@10001000 { + compatible = "mediatek,mt8173-infracfg", "syscon"; + reg = <0x10001000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/arm/mediatek/mediatek,mmsys.yaml b/dts/Bindings/arm/mediatek/mediatek,mmsys.yaml index b31d90dc9e..6ad023eec1 100644 --- a/dts/Bindings/arm/mediatek/mediatek,mmsys.yaml +++ b/dts/Bindings/arm/mediatek/mediatek,mmsys.yaml @@ -31,6 +31,7 @@ properties: - mediatek,mt8183-mmsys - mediatek,mt8186-mmsys - mediatek,mt8192-mmsys + - mediatek,mt8195-mmsys - mediatek,mt8365-mmsys - const: syscon - items: @@ -41,6 +42,30 @@ properties: reg: maxItems: 1 + power-domains: + description: + A phandle and PM domain specifier as defined by bindings + of the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + mboxes: + description: + Using mailbox to communicate with GCE, it should have this + property and list of phandle, mailbox specifiers. See + Documentation/devicetree/bindings/mailbox/mtk-gce.txt for details. + $ref: /schemas/types.yaml#/definitions/phandle-array + + mediatek,gce-client-reg: + description: + The register of client driver can be configured by gce with 4 arguments + defined in this property, such as phandle of gce, subsys id, + register offset and size. + Each subsys id is mapping to a base address of display function blocks + register which is defined in the gce header + include/dt-bindings/gce/-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + "#clock-cells": const: 1 @@ -56,9 +81,16 @@ additionalProperties: false examples: - | + #include + #include + mmsys: syscon@14000000 { compatible = "mediatek,mt8173-mmsys", "syscon"; reg = <0x14000000 0x1000>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; #clock-cells = <1>; #reset-cells = <1>; + mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, + <&gce 1 CMDQ_THR_PRIO_HIGHEST>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; }; diff --git a/dts/Bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml b/dts/Bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml new file mode 100644 index 0000000000..9fbeb626ab --- /dev/null +++ b/dts/Bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek PCIE Mirror Controller for MT7622 + +maintainers: + - Lorenzo Bianconi + - Felix Fietkau + +description: + The mediatek PCIE mirror provides a configuration interface for PCIE + controller on MT7622 soc. + +properties: + compatible: + items: + - enum: + - mediatek,mt7622-pcie-mirror + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + pcie_mirror: pcie-mirror@10000400 { + compatible = "mediatek,mt7622-pcie-mirror", "syscon"; + reg = <0 0x10000400 0 0x10>; + }; + }; diff --git a/dts/Bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/dts/Bindings/arm/mediatek/mediatek,mt7622-wed.yaml new file mode 100644 index 0000000000..787d6673f9 --- /dev/null +++ b/dts/Bindings/arm/mediatek/mediatek,mt7622-wed.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-wed.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek Wireless Ethernet Dispatch Controller for MT7622 + +maintainers: + - Lorenzo Bianconi + - Felix Fietkau + +description: + The mediatek wireless ethernet dispatch controller can be configured to + intercept and handle access to the WLAN DMA queues and PCIe interrupts + and implement hardware flow offloading from ethernet to WLAN. + +properties: + compatible: + items: + - enum: + - mediatek,mt7622-wed + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + #include + soc { + #address-cells = <2>; + #size-cells = <2>; + wed0: wed@1020a000 { + compatible = "mediatek,mt7622-wed","syscon"; + reg = <0 0x1020a000 0 0x1000>; + interrupts = ; + }; + }; diff --git a/dts/Bindings/arm/mediatek/mediatek,mt8186-clock.yaml b/dts/Bindings/arm/mediatek/mediatek,mt8186-clock.yaml new file mode 100644 index 0000000000..cf1002c3ef --- /dev/null +++ b/dts/Bindings/arm/mediatek/mediatek,mt8186-clock.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-clock.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek Functional Clock Controller for MT8186 + +maintainers: + - Chun-Jie Chen + +description: | + The clock architecture in MediaTek like below + PLLs --> + dividers --> + muxes + --> + clock gate + + The devices provide clock gate control in different IP blocks. + +properties: + compatible: + items: + - enum: + - mediatek,mt8186-imp_iic_wrap + - mediatek,mt8186-mfgsys + - mediatek,mt8186-wpesys + - mediatek,mt8186-imgsys1 + - mediatek,mt8186-imgsys2 + - mediatek,mt8186-vdecsys + - mediatek,mt8186-vencsys + - mediatek,mt8186-camsys + - mediatek,mt8186-camsys_rawa + - mediatek,mt8186-camsys_rawb + - mediatek,mt8186-mdpsys + - mediatek,mt8186-ipesys + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + imp_iic_wrap: clock-controller@11017000 { + compatible = "mediatek,mt8186-imp_iic_wrap"; + reg = <0x11017000 0x1000>; + #clock-cells = <1>; + }; diff --git a/dts/Bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml b/dts/Bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml new file mode 100644 index 0000000000..0886e2e335 --- /dev/null +++ b/dts/Bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-sys-clock.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek System Clock Controller for MT8186 + +maintainers: + - Chun-Jie Chen + +description: | + The clock architecture in MediaTek like below + PLLs --> + dividers --> + muxes + --> + clock gate + + The apmixedsys provides most of PLLs which generated from SoC 26m. + The topckgen provides dividers and muxes which provide the clock source to other IP blocks. + The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks. + The mcusys provides mux control to select the clock source in AP MCU. + The device nodes also provide the system control capacity for configuration. + +properties: + compatible: + items: + - enum: + - mediatek,mt8186-mcusys + - mediatek,mt8186-topckgen + - mediatek,mt8186-infracfg_ao + - mediatek,mt8186-apmixedsys + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + topckgen: syscon@10000000 { + compatible = "mediatek,mt8186-topckgen", "syscon"; + reg = <0x10000000 0x1000>; + #clock-cells = <1>; + }; diff --git a/dts/Bindings/arm/mediatek/mediatek,pericfg.yaml b/dts/Bindings/arm/mediatek/mediatek,pericfg.yaml index 8723dfe34b..611f666f35 100644 --- a/dts/Bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/dts/Bindings/arm/mediatek/mediatek,pericfg.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt8135-pericfg - mediatek,mt8173-pericfg - mediatek,mt8183-pericfg + - mediatek,mt8195-pericfg - mediatek,mt8516-pericfg - const: syscon - items: diff --git a/dts/Bindings/arm/mediatek/mediatek,topckgen.txt b/dts/Bindings/arm/mediatek/mediatek,topckgen.txt deleted file mode 100644 index b82422bb71..0000000000 --- a/dts/Bindings/arm/mediatek/mediatek,topckgen.txt +++ /dev/null @@ -1,35 +0,0 @@ -Mediatek topckgen controller -============================ - -The Mediatek topckgen controller provides various clocks to the system. - -Required Properties: - -- compatible: Should be one of: - - "mediatek,mt2701-topckgen" - - "mediatek,mt2712-topckgen", "syscon" - - "mediatek,mt6765-topckgen", "syscon" - - "mediatek,mt6779-topckgen", "syscon" - - "mediatek,mt6797-topckgen" - - "mediatek,mt7622-topckgen" - - "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen" - - "mediatek,mt7629-topckgen" - - "mediatek,mt7986-topckgen", "syscon" - - "mediatek,mt8135-topckgen" - - "mediatek,mt8167-topckgen", "syscon" - - "mediatek,mt8173-topckgen" - - "mediatek,mt8183-topckgen", "syscon" - - "mediatek,mt8516-topckgen" -- #clock-cells: Must be 1 - -The topckgen controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Example: - -topckgen: power-controller@10000000 { - compatible = "mediatek,mt8173-topckgen"; - reg = <0 0x10000000 0 0x1000>; - #clock-cells = <1>; -}; diff --git a/dts/Bindings/arm/msm/qcom,llcc.yaml b/dts/Bindings/arm/msm/qcom,llcc.yaml index 30fcbe2ad8..5ea506412b 100644 --- a/dts/Bindings/arm/msm/qcom,llcc.yaml +++ b/dts/Bindings/arm/msm/qcom,llcc.yaml @@ -23,6 +23,8 @@ properties: enum: - qcom,sc7180-llcc - qcom,sc7280-llcc + - qcom,sc8180x-llcc + - qcom,sc8280xp-llcc - qcom,sdm845-llcc - qcom,sm6350-llcc - qcom,sm8150-llcc diff --git a/dts/Bindings/arm/omap/prcm.txt b/dts/Bindings/arm/omap/prcm.txt index 3eb6d7afff..431ef8c56a 100644 --- a/dts/Bindings/arm/omap/prcm.txt +++ b/dts/Bindings/arm/omap/prcm.txt @@ -31,12 +31,17 @@ Required properties: (base address and length) - clocks: clocks for this module - clockdomains: clockdomains for this module +- #clock-cells: From common clock binding +- clock-output-names: From common clock binding + Example: -cm: cm@48004000 { +cm: clock@48004000 { compatible = "ti,omap3-cm"; reg = <0x48004000 0x4000>; + #clock-cells = <0>; + clock-output-names = "cm"; cm_clocks: clocks { #address-cells = <1>; diff --git a/dts/Bindings/arm/qcom.yaml b/dts/Bindings/arm/qcom.yaml index 129cdd2462..5c06d1bfc0 100644 --- a/dts/Bindings/arm/qcom.yaml +++ b/dts/Bindings/arm/qcom.yaml @@ -39,8 +39,11 @@ description: | msm8994 msm8996 sa8155p + sa8540p sc7180 sc7280 + sc8180x + sc8280xp sdm630 sdm632 sdm660 @@ -99,6 +102,7 @@ properties: - items: - enum: + - asus,sparrow - lg,lenok - const: qcom,apq8026 @@ -225,6 +229,18 @@ properties: - google,senor - const: qcom,sc7280 + - items: + - enum: + - lenovo,flex-5g + - microsoft,surface-prox + - qcom,sc8180x-primus + - const: qcom,sc8180x + + - items: + - enum: + - qcom,sc8280xp-qrd + - const: qcom,sc8280xp + - items: - enum: - fairphone,fp3 @@ -258,6 +274,11 @@ properties: - qcom,sa8155p-adp - const: qcom,sa8155p + - items: + - enum: + - qcom,sa8295p-adp + - const: qcom,sa8540p + - items: - enum: - fairphone,fp4 diff --git a/dts/Bindings/arm/renesas.yaml b/dts/Bindings/arm/renesas.yaml index fa435d6fda..ff80152f09 100644 --- a/dts/Bindings/arm/renesas.yaml +++ b/dts/Bindings/arm/renesas.yaml @@ -327,6 +327,18 @@ properties: - const: renesas,spider-cpu - const: renesas,r8a779f0 + - description: R-Car V4H (R8A779G0) + items: + - enum: + - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000) + - const: renesas,r8a779g0 + + - items: + - enum: + - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000) + - const: renesas,white-hawk-cpu + - const: renesas,r8a779g0 + - description: R-Car H3e (R8A779M0) items: - enum: @@ -405,6 +417,8 @@ properties: - description: RZ/G2UL (R9A07G043) items: + - enum: + - renesas,smarc-evk # SMARC EVK - enum: - renesas,r9a07g043u11 # RZ/G2UL Type-1 - renesas,r9a07g043u12 # RZ/G2UL Type-2 @@ -430,6 +444,12 @@ properties: - renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L - const: renesas,r9a07g054 + - description: RZ/V2M (R9A09G011) + items: + - enum: + - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0 + - const: renesas,r9a09g011 + additionalProperties: true ... diff --git a/dts/Bindings/arm/rockchip.yaml b/dts/Bindings/arm/rockchip.yaml index eece92f83a..cf9eb1e832 100644 --- a/dts/Bindings/arm/rockchip.yaml +++ b/dts/Bindings/arm/rockchip.yaml @@ -133,6 +133,11 @@ properties: - firefly,roc-rk3399-pc-plus - const: rockchip,rk3399 + - description: Firefly Station M2 + items: + - const: firefly,rk3566-roc-pc + - const: rockchip,rk3566 + - description: FriendlyElec NanoPi R2S items: - const: friendlyarm,nanopi-r2s @@ -502,9 +507,18 @@ properties: - const: pine64,rockpro64 - const: rockchip,rk3399 - - description: Pine64 Quartz64 Model A + - description: Pine64 Quartz64 Model A/B items: - - const: pine64,quartz64-a + - enum: + - pine64,quartz64-a + - pine64,quartz64-b + - const: rockchip,rk3566 + + - description: Pine64 SoQuartz SoM + items: + - enum: + - pine64,soquartz-cm4io + - const: pine64,soquartz - const: rockchip,rk3566 - description: Radxa Rock @@ -545,6 +559,11 @@ properties: - const: radxa,rock2-square - const: rockchip,rk3288 + - description: Radxa ROCK3 Model A + items: + - const: radxa,rock3a + - const: rockchip,rk3568 + - description: Rikomagic MK808 v1 items: - const: rikomagic,mk808 diff --git a/dts/Bindings/arm/sp810.txt b/dts/Bindings/arm/sp810.txt deleted file mode 100644 index 46652bf651..0000000000 --- a/dts/Bindings/arm/sp810.txt +++ /dev/null @@ -1,46 +0,0 @@ -SP810 System Controller ------------------------ - -Required properties: - -- compatible: standard compatible string for a Primecell peripheral, - see Documentation/devicetree/bindings/arm/primecell.yaml - for more details - should be: "arm,sp810", "arm,primecell" - -- reg: standard registers property, physical address and size - of the control registers - -- clock-names: from the common clock bindings, for more details see - Documentation/devicetree/bindings/clock/clock-bindings.txt; - should be: "refclk", "timclk", "apb_pclk" - -- clocks: from the common clock bindings, phandle and clock - specifier pairs for the entries of clock-names property - -- #clock-cells: from the common clock bindings; - should be: <1> - -- clock-output-names: from the common clock bindings; - should be: "timerclken0", "timerclken1", "timerclken2", "timerclken3" - -- assigned-clocks: from the common clock binding; - should be: clock specifier for each output clock of this - provider node - -- assigned-clock-parents: from the common clock binding; - should be: phandle of input clock listed in clocks - property with the highest frequency - -Example: - v2m_sysctl: sysctl@20000 { - compatible = "arm,sp810", "arm,primecell"; - reg = <0x020000 0x1000>; - clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; - clock-names = "refclk", "timclk", "apb_pclk"; - #clock-cells = <1>; - clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; - assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; - assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; - - }; diff --git a/dts/Bindings/arm/sp810.yaml b/dts/Bindings/arm/sp810.yaml new file mode 100644 index 0000000000..bc8e524aa9 --- /dev/null +++ b/dts/Bindings/arm/sp810.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sp810.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile Express SP810 System Controller bindings + +maintainers: + - Andre Przywara + +description: + The Arm SP810 system controller provides clocks, timers and a watchdog. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + const: arm,sp810 + required: + - compatible + +properties: + compatible: + items: + - const: arm,sp810 + - const: arm,primecell + + reg: + maxItems: 1 + + clock-names: + items: + - const: refclk + - const: timclk + - const: apb_pclk + + clocks: + items: + - description: reference clock + - description: timer clock + - description: APB register access clock + + "#clock-cells": + const: 1 + + clock-output-names: + maxItems: 4 + + assigned-clocks: + maxItems: 4 + + assigned-clock-parents: + maxItems: 4 + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +examples: + - | + sysctl@20000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", + "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, + <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, + <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; + }; diff --git a/dts/Bindings/arm/spe-pmu.txt b/dts/Bindings/arm/spe-pmu.txt deleted file mode 100644 index 93372f2a7d..0000000000 --- a/dts/Bindings/arm/spe-pmu.txt +++ /dev/null @@ -1,20 +0,0 @@ -* ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU) - -ARMv8.2 introduces the optional Statistical Profiling Extension for collecting -performance sample data using an in-memory trace buffer. - -** SPE Required properties: - -- compatible : should be one of: - "arm,statistical-profiling-extension-v1" - -- interrupts : Exactly 1 PPI must be listed. For heterogeneous systems where - SPE is only supported on a subset of the CPUs, please consult - the arm,gic-v3 binding for details on describing a PPI partition. - -** Example: - -spe-pmu { - compatible = "arm,statistical-profiling-extension-v1"; - interrupts = ; -}; diff --git a/dts/Bindings/arm/stm32/stm32.yaml b/dts/Bindings/arm/stm32/stm32.yaml index fa0a1b8412..8b31565fee 100644 --- a/dts/Bindings/arm/stm32/stm32.yaml +++ b/dts/Bindings/arm/stm32/stm32.yaml @@ -14,21 +14,6 @@ properties: const: "/" compatible: oneOf: - - description: DH STM32MP1 SoM based Boards - items: - - enum: - - arrow,stm32mp157a-avenger96 # Avenger96 - - dh,stm32mp153c-dhcom-drc02 - - dh,stm32mp157c-dhcom-pdk2 - - dh,stm32mp157c-dhcom-picoitx - - enum: - - dh,stm32mp153c-dhcom-som - - dh,stm32mp157a-dhcor-som - - dh,stm32mp157c-dhcom-som - - enum: - - st,stm32mp153 - - st,stm32mp157 - - description: emtrion STM32MP1 Argon based Boards items: - const: emtrion,stm32mp157c-emsbc-argon @@ -65,6 +50,21 @@ properties: - enum: - st,stm32mp135f-dk - const: st,stm32mp135 + + - description: ST STM32MP151 based Boards + items: + - enum: + - prt,prtt1a # Protonic PRTT1A + - prt,prtt1c # Protonic PRTT1C + - prt,prtt1s # Protonic PRTT1S + - const: st,stm32mp151 + + - description: DH STM32MP153 SoM based Boards + items: + - const: dh,stm32mp153c-dhcom-drc02 + - const: dh,stm32mp153c-dhcom-som + - const: st,stm32mp153 + - items: - enum: - shiratech,stm32mp157a-iot-box # IoT Box @@ -72,13 +72,45 @@ properties: - st,stm32mp157c-ed1 - st,stm32mp157a-dk1 - st,stm32mp157c-dk2 + - const: st,stm32mp157 + - items: + - const: st,stm32mp157a-dk1-scmi + - const: st,stm32mp157a-dk1 - const: st,stm32mp157 - items: + - const: st,stm32mp157c-dk2-scmi + - const: st,stm32mp157c-dk2 + - const: st,stm32mp157 + - items: + - const: st,stm32mp157c-ed1-scmi + - const: st,stm32mp157c-ed1 + - const: st,stm32mp157 + - items: + - const: st,stm32mp157c-ev1 + - const: st,stm32mp157c-ed1 + - const: st,stm32mp157 + - items: + - const: st,stm32mp157c-ev1-scmi - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 + - description: DH STM32MP1 SoM based Boards + items: + - enum: + - arrow,stm32mp157a-avenger96 # Avenger96 + - const: dh,stm32mp157a-dhcor-som + - const: st,stm32mp157 + + - description: DH STM32MP1 SoM based Boards + items: + - enum: + - dh,stm32mp157c-dhcom-pdk2 + - dh,stm32mp157c-dhcom-picoitx + - const: dh,stm32mp157c-dhcom-som + - const: st,stm32mp157 + - description: Engicam i.Core STM32MP1 SoM based Boards items: - enum: @@ -103,6 +135,7 @@ properties: - const: oct,stm32mp15xx-osd32 - enum: - st,stm32mp157 + - description: Odyssey STM32MP1 SoM based Boards items: - enum: diff --git a/dts/Bindings/arm/sunxi.yaml b/dts/Bindings/arm/sunxi.yaml index 086c68771d..95278a6a9a 100644 --- a/dts/Bindings/arm/sunxi.yaml +++ b/dts/Bindings/arm/sunxi.yaml @@ -391,6 +391,11 @@ properties: - const: libretech,all-h5-cc-h5 - const: allwinner,sun50i-h5 + - description: Lichee Pi Nano + items: + - const: licheepi,licheepi-nano + - const: allwinner,suniv-f1c100s + - description: Lichee Pi One items: - const: licheepi,licheepi-one diff --git a/dts/Bindings/arm/syna.txt b/dts/Bindings/arm/syna.txt index d8b48f2edf..851f48ead9 100644 --- a/dts/Bindings/arm/syna.txt +++ b/dts/Bindings/arm/syna.txt @@ -18,10 +18,6 @@ stable binding/ABI. --------------------------------------------------------------- -Boards with the Synaptics AS370 SoC shall have the following properties: - Required root node property: - compatible: "syna,as370" - Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500 shall have the following properties: diff --git a/dts/Bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml b/dts/Bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml new file mode 100644 index 0000000000..8c6543b5c0 --- /dev/null +++ b/dts/Bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra-ccplex-cluster.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: NVIDIA Tegra CPU COMPLEX CLUSTER area device tree bindings + +maintainers: + - Sumit Gupta + - Mikko Perttunen + - Jon Hunter + - Thierry Reding + +description: |+ + The Tegra CPU COMPLEX CLUSTER area contains memory-mapped + registers that initiate CPU frequency/voltage transitions. + +properties: + $nodename: + pattern: "ccplex@([0-9a-f]+)$" + + compatible: + enum: + - nvidia,tegra186-ccplex-cluster + - nvidia,tegra234-ccplex-cluster + + reg: + maxItems: 1 + + nvidia,bpmp: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the BPMP node that needs to be queried to get + operating point data for all CPUs. + +additionalProperties: false + +required: + - compatible + - reg + - nvidia,bpmp + - status + +examples: + - | + ccplex@e000000 { + compatible = "nvidia,tegra234-ccplex-cluster"; + reg = <0x0e000000 0x5ffff>; + nvidia,bpmp = <&bpmp>; + status = "okay"; + }; diff --git a/dts/Bindings/arm/ux500.yaml b/dts/Bindings/arm/ux500.yaml index a46193ad94..17accb31bc 100644 --- a/dts/Bindings/arm/ux500.yaml +++ b/dts/Bindings/arm/ux500.yaml @@ -40,6 +40,11 @@ properties: - const: samsung,codina - const: st-ericsson,u8500 + - description: Samsung Galaxy Exhibit (SGH-T599) + items: + - const: samsung,codina-tmo + - const: st-ericsson,u8500 + - description: Samsung Galaxy Beam (GT-I8530) items: - const: samsung,gavini diff --git a/dts/Bindings/arm/vexpress-config.yaml b/dts/Bindings/arm/vexpress-config.yaml new file mode 100644 index 0000000000..09e1adf5ca --- /dev/null +++ b/dts/Bindings/arm/vexpress-config.yaml @@ -0,0 +1,285 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/vexpress-config.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile Express configuration bus bindings + +maintainers: + - Andre Przywara + +description: + This is a system control register block, acting as a bridge to the + platform's configuration bus via "system control" interface, addressing + devices with site number, position in the board stack, config controller, + function and device numbers - see motherboard's TRM for more details. + +properties: + compatible: + const: arm,vexpress,config-bus + + arm,vexpress,config-bridge: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the sysreg node. + + muxfpga: + type: object + properties: + compatible: + const: arm,vexpress-muxfpga + + arm,vexpress-sysreg,func: + description: FPGA specifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 7 + - description: device number + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + shutdown: + type: object + properties: + compatible: + const: arm,vexpress-shutdown + + arm,vexpress-sysreg,func: + description: shutdown identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 8 + - description: device number + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + reboot: + type: object + properties: + compatible: + const: arm,vexpress-reboot + + arm,vexpress-sysreg,func: + description: reboot identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 9 + - description: device number + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + dvimode: + type: object + properties: + compatible: + const: arm,vexpress-dvimode + + arm,vexpress-sysreg,func: + description: DVI mode identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 11 + - description: device number + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + +additionalProperties: false + +required: + - compatible + - arm,vexpress,config-bridge + +patternProperties: + 'clk[0-9]*$': + type: object + description: + clocks + + properties: + compatible: + const: arm,vexpress-osc + + arm,vexpress-sysreg,func: + description: clock specifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 1 + - description: clock number + + freq-range: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: minimal clock frequency + - description: maximum clock frequency + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + - "#clock-cells" + + "^volt-.+$": + $ref: /schemas/regulator/regulator.yaml# + properties: + compatible: + const: arm,vexpress-volt + + arm,vexpress-sysreg,func: + description: regulator specifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 2 + - description: device number + + label: + maxItems: 1 + + unevaluatedProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + "^amp-.+$": + type: object + properties: + compatible: + const: arm,vexpress-amp + + arm,vexpress-sysreg,func: + description: current sensor identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 3 + - description: device number + + label: + maxItems: 1 + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + "^temp-.+$": + type: object + properties: + compatible: + const: arm,vexpress-temp + + arm,vexpress-sysreg,func: + description: temperature sensor identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 4 + - description: device number + + label: + maxItems: 1 + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + "^reset[0-9]*$": + type: object + properties: + compatible: + const: arm,vexpress-reset + + arm,vexpress-sysreg,func: + description: reset specifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 5 + - description: reset device number + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + "^power-.+$": + type: object + properties: + compatible: + const: arm,vexpress-power + + arm,vexpress-sysreg,func: + description: power sensor identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 12 + - description: device number + + label: + maxItems: 1 + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + "^energy(-.+)?$": + type: object + properties: + compatible: + const: arm,vexpress-energy + + arm,vexpress-sysreg,func: + description: energy sensor identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + oneOf: + - items: + - const: 13 + - description: device number + - items: + - const: 13 + - description: device number + - const: 13 + - description: second device number + + label: + maxItems: 1 + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + +examples: + - | + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + clk0 { + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + #clock-cells = <0>; + }; + + energy { + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 0>, <13 1>; + }; + }; diff --git a/dts/Bindings/arm/vexpress-sysreg.txt b/dts/Bindings/arm/vexpress-sysreg.txt deleted file mode 100644 index 50095802fb..0000000000 --- a/dts/Bindings/arm/vexpress-sysreg.txt +++ /dev/null @@ -1,103 +0,0 @@ -ARM Versatile Express system registers --------------------------------------- - -This is a system control registers block, providing multiple low level -platform functions like board detection and identification, software -interrupt generation, MMC and NOR Flash control etc. - -Required node properties: -- compatible value : = "arm,vexpress,sysreg"; -- reg : physical base address and the size of the registers window - -Deprecated properties, replaced by GPIO subnodes (see below): -- gpio-controller : specifies that the node is a GPIO controller -- #gpio-cells : size of the GPIO specifier, should be 2: - - first cell is the pseudo-GPIO line number: - 0 - MMC CARDIN - 1 - MMC WPROT - 2 - NOR FLASH WPn - - second cell can take standard GPIO flags (currently ignored). - -Control registers providing pseudo-GPIO lines must be represented -by subnodes, each of them requiring the following properties: -- compatible value : one of - "arm,vexpress-sysreg,sys_led" - "arm,vexpress-sysreg,sys_mci" - "arm,vexpress-sysreg,sys_flash" -- gpio-controller : makes the node a GPIO controller -- #gpio-cells : size of the GPIO specifier, must be 2: - - first cell is the function number: - - for sys_led : 0..7 = LED 0..7 - - for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT - - for sys_flash : 0 = NOR FLASH WPn - - second cell can take standard GPIO flags (currently ignored). - -Example: - v2m_sysreg: sysreg@10000000 { - compatible = "arm,vexpress-sysreg"; - reg = <0x10000000 0x1000>; - - v2m_led_gpios: sys_led@8 { - compatible = "arm,vexpress-sysreg,sys_led"; - gpio-controller; - #gpio-cells = <2>; - }; - - v2m_mmc_gpios: sys_mci@48 { - compatible = "arm,vexpress-sysreg,sys_mci"; - gpio-controller; - #gpio-cells = <2>; - }; - - v2m_flash_gpios: sys_flash@4c { - compatible = "arm,vexpress-sysreg,sys_flash"; - gpio-controller; - #gpio-cells = <2>; - }; - }; - -This block also can also act a bridge to the platform's configuration -bus via "system control" interface, addressing devices with site number, -position in the board stack, config controller, function and device -numbers - see motherboard's TRM for more details. All configuration -controller accessible via this interface must reference the sysreg -node via "arm,vexpress,config-bridge" phandle and define appropriate -topology properties - see main vexpress node documentation for more -details. Each child of such node describes one function and must -define the following properties: -- compatible value : must be one of (corresponding to the TRM): - "arm,vexpress-amp" - "arm,vexpress-dvimode" - "arm,vexpress-energy" - "arm,vexpress-muxfpga" - "arm,vexpress-osc" - "arm,vexpress-power" - "arm,vexpress-reboot" - "arm,vexpress-reset" - "arm,vexpress-scc" - "arm,vexpress-shutdown" - "arm,vexpress-temp" - "arm,vexpress-volt" -- arm,vexpress-sysreg,func : must contain a set of two cells long groups: - - first cell of each group defines the function number - (eg. 1 for clock generator, 2 for voltage regulators etc.) - - second cell of each group defines device number (eg. osc 0, - osc 1 etc.) - - some functions (eg. energy meter, with its 64 bit long counter) - are using more than one function/device number pair - -Example: - mcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - osc@0 { - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 0>; - }; - - energy@0 { - compatible = "arm,vexpress-energy"; - arm,vexpress-sysreg,func = <13 0>, <13 1>; - }; - }; diff --git a/dts/Bindings/arm/vexpress-sysreg.yaml b/dts/Bindings/arm/vexpress-sysreg.yaml new file mode 100644 index 0000000000..b5e26e41f8 --- /dev/null +++ b/dts/Bindings/arm/vexpress-sysreg.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/vexpress-sysreg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile Express system registers bindings + +maintainers: + - Andre Przywara + +description: + This is a system control registers block, providing multiple low level + platform functions like board detection and identification, software + interrupt generation, MMC and NOR Flash control, etc. + +properties: + compatible: + const: arm,vexpress-sysreg + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +additionalProperties: false + +patternProperties: + '^gpio@[0-9a-f]+$': + type: object + additionalProperties: false + description: + GPIO children + + properties: + compatible: + enum: + - arm,vexpress-sysreg,sys_led + - arm,vexpress-sysreg,sys_mci + - arm,vexpress-sysreg,sys_flash + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the function number: + for sys_led : 0..7 = LED 0..7 + for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT + for sys_flash : 0 = NOR FLASH WPn + The second cell can take standard GPIO flags. + + reg: + maxItems: 1 + + required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +required: + - compatible + - "#address-cells" + - "#size-cells" + +examples: + - | + sysreg@0 { + compatible = "arm,vexpress-sysreg"; + reg = <0x00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + + v2m_led_gpios: gpio@8 { + compatible = "arm,vexpress-sysreg,sys_led"; + reg = <0x008 4>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + +... diff --git a/dts/Bindings/ata/renesas,rcar-sata.yaml b/dts/Bindings/ata/renesas,rcar-sata.yaml index c060c7914c..c4e4a9eab6 100644 --- a/dts/Bindings/ata/renesas,rcar-sata.yaml +++ b/dts/Bindings/ata/renesas,rcar-sata.yaml @@ -26,6 +26,7 @@ properties: - items: - enum: - renesas,sata-r8a774b1 # RZ/G2N + - renesas,sata-r8a774e1 # RZ/G2H - renesas,sata-r8a7795 # R-Car H3 - renesas,sata-r8a77965 # R-Car M3-N - const: renesas,rcar-gen3-sata # generic R-Car Gen3 or RZ/G2 diff --git a/dts/Bindings/bus/qcom,ssc-block-bus.yaml b/dts/Bindings/bus/qcom,ssc-block-bus.yaml new file mode 100644 index 0000000000..5b97050790 --- /dev/null +++ b/dts/Bindings/bus/qcom,ssc-block-bus.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs + +maintainers: + - Michael Srba + +description: | + This binding describes the dependencies (clocks, resets, power domains) which + need to be turned on in a sequence before communication over the AHB bus + becomes possible. + + Additionally, the reg property is used to pass to the driver the location of + two sadly undocumented registers which need to be poked as part of the sequence. + + The SSC (Snapdragon Sensor Core) block contains a gpio controller, i2c/spi/uart + controllers, a hexagon core, and a clock controller which provides clocks for + the above. + +properties: + compatible: + items: + - const: qcom,msm8998-ssc-block-bus + - const: qcom,ssc-block-bus + + reg: + description: | + Shall contain the addresses of the SSCAON_CONFIG0 and SSCAON_CONFIG1 + registers + minItems: 2 + maxItems: 2 + + reg-names: + items: + - const: mpm_sscaon_config0 + - const: mpm_sscaon_config1 + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + + ranges: true + + clocks: + minItems: 6 + maxItems: 6 + + clock-names: + items: + - const: xo + - const: aggre2 + - const: gcc_im_sleep + - const: aggre2_north + - const: ssc_xo + - const: ssc_ahbs + + power-domains: + description: Power domain phandles for the ssc_cx and ssc_mx power domains + minItems: 2 + maxItems: 2 + + power-domain-names: + items: + - const: ssc_cx + - const: ssc_mx + + resets: + description: | + Reset phandles for the ssc_reset and ssc_bcr resets (note: ssc_bcr is the + branch control register associated with the ssc_xo and ssc_ahbs clocks) + minItems: 2 + maxItems: 2 + + reset-names: + items: + - const: ssc_reset + - const: ssc_bcr + + qcom,halt-regs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: describes how to locate the ssc AXI halt register + items: + - items: + - description: Phandle reference to a syscon representing TCSR + - description: offset for the ssc AXI halt register + +required: + - compatible + - reg + - reg-names + - '#address-cells' + - '#size-cells' + - ranges + - clocks + - clock-names + - power-domains + - power-domain-names + - resets + - reset-names + - qcom,halt-regs + +additionalProperties: + type: object + +examples: + - | + #include + #include + #include + + soc { + #address-cells = <1>; + #size-cells = <1>; + + // devices under this node are physically located in the SSC block, connected to an ssc-internal bus; + ssc_ahb_slave: bus@10ac008 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus"; + reg = <0x10ac008 0x4>, <0x10ac010 0x4>; + reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1"; + + clocks = <&xo>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&gcc GCC_IM_SLEEP>, + <&gcc AGGRE2_SNOC_NORTH_AXI>, + <&gcc SSC_XO>, + <&gcc SSC_CNOC_AHBS_CLK>; + clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs"; + + resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>; + reset-names = "ssc_reset", "ssc_bcr"; + + power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>; + power-domain-names = "ssc_cx", "ssc_mx"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x26000>; + }; + }; diff --git a/dts/Bindings/clock/airoha,en7523-scu.yaml b/dts/Bindings/clock/airoha,en7523-scu.yaml new file mode 100644 index 0000000000..d60e746548 --- /dev/null +++ b/dts/Bindings/clock/airoha,en7523-scu.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EN7523 Clock Device Tree Bindings + +maintainers: + - Felix Fietkau + - John Crispin + +description: | + This node defines the System Control Unit of the EN7523 SoC, + a collection of registers configuring many different aspects of the SoC. + + The clock driver uses it to read and configure settings of the + PLL controller, which provides clocks for the CPU, the bus and + other SoC internal peripherals. + + Each clock is assigned an identifier and client nodes use this identifier + to specify which clock they consume. + + All these identifiers can be found in: + [1]: . + + The clocks are provided inside a system controller node. + +properties: + compatible: + items: + - const: airoha,en7523-scu + + reg: + maxItems: 2 + + "#clock-cells": + description: + The first cell indicates the clock number, see [1] for available + clocks. + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include + scu: system-controller@1fa20000 { + compatible = "airoha,en7523-scu"; + reg = <0x1fa20000 0x400>, + <0x1fb00000 0x1000>; + #clock-cells = <1>; + }; diff --git a/dts/Bindings/clock/clock-bindings.txt b/dts/Bindings/clock/clock-bindings.txt index f2ea53832a..6fe5413688 100644 --- a/dts/Bindings/clock/clock-bindings.txt +++ b/dts/Bindings/clock/clock-bindings.txt @@ -1,186 +1,2 @@ -This binding is a work-in-progress, and are based on some experimental -work by benh[1]. - -Sources of clock signal can be represented by any node in the device -tree. Those nodes are designated as clock providers. Clock consumer -nodes use a phandle and clock specifier pair to connect clock provider -outputs to clock inputs. Similar to the gpio specifiers, a clock -specifier is an array of zero, one or more cells identifying the clock -output on a device. The length of a clock specifier is defined by the -value of a #clock-cells property in the clock provider node. - -[1] https://patchwork.ozlabs.org/patch/31551/ - -==Clock providers== - -Required properties: -#clock-cells: Number of cells in a clock specifier; Typically 0 for nodes - with a single clock output and 1 for nodes with multiple - clock outputs. - -Optional properties: -clock-output-names: Recommended to be a list of strings of clock output signal - names indexed by the first cell in the clock specifier. - However, the meaning of clock-output-names is domain - specific to the clock provider, and is only provided to - encourage using the same meaning for the majority of clock - providers. This format may not work for clock providers - using a complex clock specifier format. In those cases it - is recommended to omit this property and create a binding - specific names property. - - Clock consumer nodes must never directly reference - the provider's clock-output-names property. - -For example: - - oscillator { - #clock-cells = <1>; - clock-output-names = "ckil", "ckih"; - }; - -- this node defines a device with two clock outputs, the first named - "ckil" and the second named "ckih". Consumer nodes always reference - clocks by index. The names should reflect the clock output signal - names for the device. - -clock-indices: If the identifying number for the clocks in the node - is not linear from zero, then this allows the mapping of - identifiers into the clock-output-names array. - -For example, if we have two clocks <&oscillator 1> and <&oscillator 3>: - - oscillator { - compatible = "myclocktype"; - #clock-cells = <1>; - clock-indices = <1>, <3>; - clock-output-names = "clka", "clkb"; - } - - This ensures we do not have any empty strings in clock-output-names - - -==Clock consumers== - -Required properties: -clocks: List of phandle and clock specifier pairs, one pair - for each clock input to the device. Note: if the - clock provider specifies '0' for #clock-cells, then - only the phandle portion of the pair will appear. - -Optional properties: -clock-names: List of clock input name strings sorted in the same - order as the clocks property. Consumers drivers - will use clock-names to match clock input names - with clocks specifiers. -clock-ranges: Empty property indicating that child nodes can inherit named - clocks from this node. Useful for bus nodes to provide a - clock to their children. - -For example: - - device { - clocks = <&osc 1>, <&ref 0>; - clock-names = "baud", "register"; - }; - - -This represents a device with two clock inputs, named "baud" and "register". -The baud clock is connected to output 1 of the &osc device, and the register -clock is connected to output 0 of the &ref. - -==Example== - - /* external oscillator */ - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32678>; - clock-output-names = "osc"; - }; - - /* phase-locked-loop device, generates a higher frequency clock - * from the external oscillator reference */ - pll: pll@4c000 { - compatible = "vendor,some-pll-interface" - #clock-cells = <1>; - clocks = <&osc 0>; - clock-names = "ref"; - reg = <0x4c000 0x1000>; - clock-output-names = "pll", "pll-switched"; - }; - - /* UART, using the low frequency oscillator for the baud clock, - * and the high frequency switched PLL output for register - * clocking */ - uart@a000 { - compatible = "fsl,imx-uart"; - reg = <0xa000 0x1000>; - interrupts = <33>; - clocks = <&osc 0>, <&pll 1>; - clock-names = "baud", "register"; - }; - -This DT fragment defines three devices: an external oscillator to provide a -low-frequency reference clock, a PLL device to generate a higher frequency -clock signal, and a UART. - -* The oscillator is fixed-frequency, and provides one clock output, named "osc". -* The PLL is both a clock provider and a clock consumer. It uses the clock - signal generated by the external oscillator, and provides two output signals - ("pll" and "pll-switched"). -* The UART has its baud clock connected the external oscillator and its - register clock connected to the PLL clock (the "pll-switched" signal) - -==Assigned clock parents and rates== - -Some platforms may require initial configuration of default parent clocks -and clock frequencies. Such a configuration can be specified in a device tree -node through assigned-clocks, assigned-clock-parents and assigned-clock-rates -properties. The assigned-clock-parents property should contain a list of parent -clocks in the form of a phandle and clock specifier pair and the -assigned-clock-rates property should contain a list of frequencies in Hz. Both -these properties should correspond to the clocks listed in the assigned-clocks -property. - -To skip setting parent or rate of a clock its corresponding entry should be -set to 0, or can be omitted if it is not followed by any non-zero entry. - - uart@a000 { - compatible = "fsl,imx-uart"; - reg = <0xa000 0x1000>; - ... - clocks = <&osc 0>, <&pll 1>; - clock-names = "baud", "register"; - - assigned-clocks = <&clkcon 0>, <&pll 2>; - assigned-clock-parents = <&pll 2>; - assigned-clock-rates = <0>, <460800>; - }; - -In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and -the <&pll 2> clock is assigned a frequency value of 460800 Hz. - -Configuring a clock's parent and rate through the device node that consumes -the clock can be done only for clocks that have a single user. Specifying -conflicting parent or rate configuration in multiple consumer nodes for -a shared clock is forbidden. - -Configuration of common clocks, which affect multiple consumer devices can -be similarly specified in the clock provider node. - -==Protected clocks== - -Some platforms or firmwares may not fully expose all the clocks to the OS, such -as in situations where those clks are used by drivers running in ARM secure -execution levels. Such a configuration can be specified in device tree with the -protected-clocks property in the form of a clock specifier list. This property should -only be specified in the node that is providing the clocks being protected: - - clock-controller@a000f000 { - compatible = "vendor,clk95; - reg = <0xa000f000 0x1000> - #clocks-cells = <1>; - ... - protected-clocks = , ; - }; +This file has moved to the clock binding schema: +https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/clock/clock.yaml diff --git a/dts/Bindings/clock/mediatek,apmixedsys.yaml b/dts/Bindings/clock/mediatek,apmixedsys.yaml new file mode 100644 index 0000000000..770546195f --- /dev/null +++ b/dts/Bindings/clock/mediatek,apmixedsys.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/mediatek,apmixedsys.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek AP Mixedsys Controller + +maintainers: + - Michael Turquette + - Stephen Boyd + +description: + The Mediatek apmixedsys controller provides PLLs to the system. + The clock values can be found in . + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt6797-apmixedsys + - mediatek,mt7622-apmixedsys + - mediatek,mt7986-apmixedsys + - mediatek,mt8135-apmixedsys + - mediatek,mt8173-apmixedsys + - mediatek,mt8516-apmixedsys + - items: + - const: mediatek,mt7623-apmixedsys + - const: mediatek,mt2701-apmixedsys + - const: syscon + - items: + - enum: + - mediatek,mt2701-apmixedsys + - mediatek,mt2712-apmixedsys + - mediatek,mt6765-apmixedsys + - mediatek,mt6779-apmixedsys + - mediatek,mt7629-apmixedsys + - mediatek,mt8167-apmixedsys + - mediatek,mt8183-apmixedsys + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + apmixedsys: clock-controller@10209000 { + compatible = "mediatek,mt8173-apmixedsys"; + reg = <0x10209000 0x1000>; + #clock-cells = <1>; + }; diff --git a/dts/Bindings/clock/mediatek,topckgen.yaml b/dts/Bindings/clock/mediatek,topckgen.yaml new file mode 100644 index 0000000000..5b8b37a2e5 --- /dev/null +++ b/dts/Bindings/clock/mediatek,topckgen.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/mediatek,topckgen.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek Top Clock Generator Controller + +maintainers: + - Michael Turquette + - Stephen Boyd + +description: + The Mediatek topckgen controller provides various clocks to the system. + The clock values can be found in . + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt6797-topckgen + - mediatek,mt7622-topckgen + - mediatek,mt8135-topckgen + - mediatek,mt8173-topckgen + - mediatek,mt8516-topckgen + - items: + - const: mediatek,mt7623-topckgen + - const: mediatek,mt2701-topckgen + - const: syscon + - items: + - enum: + - mediatek,mt2701-topckgen + - mediatek,mt2712-topckgen + - mediatek,mt6765-topckgen + - mediatek,mt6779-topckgen + - mediatek,mt7629-topckgen + - mediatek,mt7986-topckgen + - mediatek,mt8167-topckgen + - mediatek,mt8183-topckgen + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + topckgen: clock-controller@10000000 { + compatible = "mediatek,mt8173-topckgen"; + reg = <0x10000000 0x1000>; + #clock-cells = <1>; + }; diff --git a/dts/Bindings/clock/qcom,gcc-apq8064.yaml b/dts/Bindings/clock/qcom,gcc-apq8064.yaml index 97936411b6..9fafcb0800 100644 --- a/dts/Bindings/clock/qcom,gcc-apq8064.yaml +++ b/dts/Bindings/clock/qcom,gcc-apq8064.yaml @@ -20,12 +20,10 @@ description: | See also: - dt-bindings/clock/qcom,gcc-msm8960.h - dt-bindings/reset/qcom,gcc-msm8960.h - - dt-bindings/clock/qcom,gcc-apq8084.h - - dt-bindings/reset/qcom,gcc-apq8084.h properties: compatible: - const: qcom,gcc-apq8084 + const: qcom,gcc-apq8064 nvmem-cells: minItems: 1 diff --git a/dts/Bindings/clock/qcom,gcc-apq8084.yaml b/dts/Bindings/clock/qcom,gcc-apq8084.yaml new file mode 100644 index 0000000000..397fb918e0 --- /dev/null +++ b/dts/Bindings/clock/qcom,gcc-apq8084.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8084.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for APQ8084 + +maintainers: + - Stephen Boyd + - Taniya Das + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on APQ8084. + + See also:: + - dt-bindings/clock/qcom,gcc-apq8084.h + - dt-bindings/reset/qcom,gcc-apq8084.h + +allOf: + - $ref: qcom,gcc.yaml# + +properties: + compatible: + const: qcom,gcc-apq8084 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + clock-controller@fc400000 { + compatible = "qcom,gcc-apq8084"; + reg = <0xfc400000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/dts/Bindings/clock/qcom,gcc-sc8280xp.yaml b/dts/Bindings/clock/qcom,gcc-sc8280xp.yaml new file mode 100644 index 0000000000..0bcdc69c6f --- /dev/null +++ b/dts/Bindings/clock/qcom,gcc-sc8280xp.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SC8280xp + +maintainers: + - Bjorn Andersson + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SC8280xp. + + See also: + - include/dt-bindings/clock/qcom,gcc-sc8280xp.h + +properties: + compatible: + const: qcom,gcc-sc8280xp + + clocks: + items: + - description: XO reference clock + - description: Sleep clock + - description: UFS memory first RX symbol clock + - description: UFS memory second RX symbol clock + - description: UFS memory first TX symbol clock + - description: UFS card first RX symbol clock + - description: UFS card second RX symbol clock + - description: UFS card first TX symbol clock + - description: Primary USB SuperSpeed pipe clock + - description: USB4 PHY pipegmux clock source + - description: USB4 PHY DP gmux clock source + - description: USB4 PHY sys piegmux clock source + - description: USB4 PHY PCIe pipe clock + - description: USB4 PHY router max pipe clock + - description: Primary USB4 RX0 clock + - description: Primary USB4 RX1 clock + - description: Secondary USB SuperSpeed pipe clock + - description: Second USB4 PHY pipegmux clock source + - description: Second USB4 PHY DP gmux clock source + - description: Second USB4 PHY sys pipegmux clock source + - description: Second USB4 PHY PCIe pipe clock + - description: Second USB4 PHY router max pipe clock + - description: Secondary USB4 RX0 clock + - description: Secondary USB4 RX1 clock + - description: Multiport USB first SupserSpeed pipe clock + - description: Multiport USB second SuperSpeed pipe clock + - description: PCIe 2a pipe clock + - description: PCIe 2b pipe clock + - description: PCIe 3a pipe clock + - description: PCIe 3b pipe clock + - description: PCIe 4 pipe clock + - description: First EMAC controller reference clock + - description: Second EMAC controller reference clock + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + maxItems: 389 + +required: + - compatible + - clocks + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include + clock-controller@100000 { + compatible = "qcom,gcc-sc8280xp"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&ufs_phy_rx_symbol_0_clk>, + <&ufs_phy_rx_symbol_1_clk>, + <&ufs_phy_tx_symbol_0_clk>, + <&ufs_card_rx_symbol_0_clk>, + <&ufs_card_rx_symbol_1_clk>, + <&ufs_card_tx_symbol_0_clk>, + <&usb_0_ssphy>, + <&gcc_usb4_phy_pipegmux_clk_src>, + <&gcc_usb4_phy_dp_gmux_clk_src>, + <&gcc_usb4_phy_sys_pipegmux_clk_src>, + <&usb4_phy_gcc_usb4_pcie_pipe_clk>, + <&usb4_phy_gcc_usb4rtr_max_pipe_clk>, + <&qusb4phy_gcc_usb4_rx0_clk>, + <&qusb4phy_gcc_usb4_rx1_clk>, + <&usb_1_ssphy>, + <&gcc_usb4_1_phy_pipegmux_clk_src>, + <&gcc_usb4_1_phy_dp_gmux_clk_src>, + <&gcc_usb4_1_phy_sys_pipegmux_clk_src>, + <&usb4_1_phy_gcc_usb4_pcie_pipe_clk>, + <&usb4_1_phy_gcc_usb4rtr_max_pipe_clk>, + <&qusb4phy_1_gcc_usb4_rx0_clk>, + <&qusb4phy_1_gcc_usb4_rx1_clk>, + <&usb_2_ssphy>, + <&usb_3_ssphy>, + <&pcie2a_lane>, + <&pcie2b_lane>, + <&pcie3a_lane>, + <&pcie3b_lane>, + <&pcie4_lane>, + <&rxc0_ref_clk>, + <&rxc1_ref_clk>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/dts/Bindings/clock/qcom,mmcc.yaml b/dts/Bindings/clock/qcom,mmcc.yaml index 4b79e89fd1..32e87014bb 100644 --- a/dts/Bindings/clock/qcom,mmcc.yaml +++ b/dts/Bindings/clock/qcom,mmcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Multimedia Clock & Reset Controller Binding maintainers: - - Jeffrey Hugo + - Jeffrey Hugo - Taniya Das description: | diff --git a/dts/Bindings/clock/qcom,rpmcc.txt b/dts/Bindings/clock/qcom,rpmcc.txt deleted file mode 100644 index da295c3c00..0000000000 --- a/dts/Bindings/clock/qcom,rpmcc.txt +++ /dev/null @@ -1,63 +0,0 @@ -Qualcomm RPM Clock Controller Binding ------------------------------------------------- -The RPM is a dedicated hardware engine for managing the shared -SoC resources in order to keep the lowest power profile. It -communicates with other hardware subsystems via shared memory -and accepts clock requests, aggregates the requests and turns -the clocks on/off or scales them on demand. - -Required properties : -- compatible : shall contain only one of the following. The generic - compatible "qcom,rpmcc" should be also included. - - "qcom,rpmcc-mdm9607", "qcom,rpmcc" - "qcom,rpmcc-msm8660", "qcom,rpmcc" - "qcom,rpmcc-apq8060", "qcom,rpmcc" - "qcom,rpmcc-msm8226", "qcom,rpmcc" - "qcom,rpmcc-msm8916", "qcom,rpmcc" - "qcom,rpmcc-msm8936", "qcom,rpmcc" - "qcom,rpmcc-msm8953", "qcom,rpmcc" - "qcom,rpmcc-msm8974", "qcom,rpmcc" - "qcom,rpmcc-msm8976", "qcom,rpmcc" - "qcom,rpmcc-apq8064", "qcom,rpmcc" - "qcom,rpmcc-ipq806x", "qcom,rpmcc" - "qcom,rpmcc-msm8992",·"qcom,rpmcc" - "qcom,rpmcc-msm8994",·"qcom,rpmcc" - "qcom,rpmcc-msm8996", "qcom,rpmcc" - "qcom,rpmcc-msm8998", "qcom,rpmcc" - "qcom,rpmcc-qcm2290", "qcom,rpmcc" - "qcom,rpmcc-qcs404", "qcom,rpmcc" - "qcom,rpmcc-sdm660", "qcom,rpmcc" - "qcom,rpmcc-sm6115", "qcom,rpmcc" - "qcom,rpmcc-sm6125", "qcom,rpmcc" - -- #clock-cells : shall contain 1 - -The clock enumerators are defined in -and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock -is an "active" clock, which means that the consumer only care that the -clock is available when the apps CPU subsystem is active, i.e. not -suspended or in deep idle. If it is important that the clock keeps running -during system suspend, you need to specify the non-active clock, the one -not containing *_A_* in the enumerator name. - -Example: - smd { - compatible = "qcom,smd"; - - rpm { - interrupts = <0 168 1>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - - rpm_requests { - compatible = "qcom,rpm-msm8916"; - qcom,smd-channels = "rpm_requests"; - - rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; - #clock-cells = <1>; - }; - }; - }; - }; diff --git a/dts/Bindings/clock/qcom,rpmcc.yaml b/dts/Bindings/clock/qcom,rpmcc.yaml new file mode 100644 index 0000000000..9d296b89a8 --- /dev/null +++ b/dts/Bindings/clock/qcom,rpmcc.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,rpmcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPM Clock Controller + +maintainers: + - Bjorn Andersson + - Krzysztof Kozlowski + +description: | + The clock enumerators are defined in and + come in pairs:: FOO_CLK followed by FOO_A_CLK. The latter clock is + an "active" clock, which means that the consumer only care that the clock is + available when the apps CPU subsystem is active, i.e. not suspended or in + deep idle. If it is important that the clock keeps running during system + suspend, you need to specify the non-active clock, the one not containing + *_A_* in the enumerator name. + +properties: + compatible: + items: + - enum: + - qcom,rpmcc-apq8060 + - qcom,rpmcc-apq8064 + - qcom,rpmcc-ipq806x + - qcom,rpmcc-mdm9607 + - qcom,rpmcc-msm8226 + - qcom,rpmcc-msm8660 + - qcom,rpmcc-msm8916 + - qcom,rpmcc-msm8936 + - qcom,rpmcc-msm8953 + - qcom,rpmcc-msm8974 + - qcom,rpmcc-msm8976 + - qcom,rpmcc-msm8992 + - qcom,rpmcc-msm8994 + - qcom,rpmcc-msm8996 + - qcom,rpmcc-msm8998 + - qcom,rpmcc-qcm2290 + - qcom,rpmcc-qcs404 + - qcom,rpmcc-sdm660 + - qcom,rpmcc-sm6115 + - qcom,rpmcc-sm6125 + - const: qcom,rpmcc + + '#clock-cells': + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xo + +required: + - compatible + - '#clock-cells' + +additionalProperties: false + +examples: + - | + rpm { + rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + clock-controller { + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; + }; diff --git a/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml b/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml new file mode 100644 index 0000000000..bad9135489 --- /dev/null +++ b/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm LPASS Core & Audio Clock Controller Binding for SC7280 + +maintainers: + - Taniya Das + +description: | + Qualcomm LPASS core and audio clock control module which supports the + clocks and power domains on SC7280. + + See also: + - dt-bindings/clock/qcom,lpasscorecc-sc7280.h + - dt-bindings/clock/qcom,lpassaudiocc-sc7280.h + +properties: + clocks: true + + clock-names: true + + compatible: + enum: + - qcom,sc7280-lpassaoncc + - qcom,sc7280-lpassaudiocc + - qcom,sc7280-lpasscorecc + - qcom,sc7280-lpasshm + + power-domains: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,sc7280-lpassaudiocc + + then: + properties: + clocks: + items: + - description: Board XO source + - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC + + clock-names: + items: + - const: bi_tcxo + - const: lpass_aon_cc_main_rcg_clk_src + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-lpassaoncc + + then: + properties: + clocks: + items: + - description: Board XO source + - description: Board XO active only source + - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: iface + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-lpasshm + - qcom,sc7280-lpasscorecc + + then: + properties: + clocks: + items: + - description: Board XO source + + clock-names: + items: + - const: bi_tcxo + +examples: + - | + #include + #include + #include + #include + lpass_audiocc: clock-controller@3300000 { + compatible = "qcom,sc7280-lpassaudiocc"; + reg = <0x3300000 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; + clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; + power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include + #include + #include + #include + lpass_hm: clock-controller@3c00000 { + compatible = "qcom,sc7280-lpasshm"; + reg = <0x3c00000 0x28>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include + #include + #include + #include + lpasscore: clock-controller@3900000 { + compatible = "qcom,sc7280-lpasscorecc"; + reg = <0x3900000 0x50000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include + #include + #include + #include + lpass_aon: clock-controller@3380000 { + compatible = "qcom,sc7280-lpassaoncc"; + reg = <0x3380000 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, + <&lpasscore LPASS_CORE_CC_CORE_CLK>; + clock-names = "bi_tcxo", "bi_tcxo_ao","iface"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/dts/Bindings/clock/renesas,cpg-mssr.yaml b/dts/Bindings/clock/renesas,cpg-mssr.yaml index e0b86214f0..e57bc40d30 100644 --- a/dts/Bindings/clock/renesas,cpg-mssr.yaml +++ b/dts/Bindings/clock/renesas,cpg-mssr.yaml @@ -49,6 +49,7 @@ properties: - renesas,r8a77995-cpg-mssr # R-Car D3 - renesas,r8a779a0-cpg-mssr # R-Car V3U - renesas,r8a779f0-cpg-mssr # R-Car S4-8 + - renesas,r8a779g0-cpg-mssr # R-Car V4H reg: maxItems: 1 diff --git a/dts/Bindings/clock/renesas,h8300-div-clock.txt b/dts/Bindings/clock/renesas,h8300-div-clock.txt deleted file mode 100644 index 399e0da223..0000000000 --- a/dts/Bindings/clock/renesas,h8300-div-clock.txt +++ /dev/null @@ -1,24 +0,0 @@ -* Renesas H8/300 divider clock - -Required Properties: - - - compatible: Must be "renesas,h8300-div-clock" - - - clocks: Reference to the parent clocks ("extal1" and "extal2") - - - #clock-cells: Must be 1 - - - reg: Base address and length of the divide rate selector - - - renesas,width: bit width of selector - -Example -------- - - cclk: cclk { - compatible = "renesas,h8300-div-clock"; - clocks = <&xclk>; - #clock-cells = <0>; - reg = <0xfee01b 2>; - renesas,width = <2>; - }; diff --git a/dts/Bindings/clock/renesas,h8s2678-pll-clock.txt b/dts/Bindings/clock/renesas,h8s2678-pll-clock.txt deleted file mode 100644 index 500cdadbce..0000000000 --- a/dts/Bindings/clock/renesas,h8s2678-pll-clock.txt +++ /dev/null @@ -1,23 +0,0 @@ -Renesas H8S2678 PLL clock - -This device is Clock multiplyer - -Required Properties: - - - compatible: Must be "renesas,h8s2678-pll-clock" - - - clocks: Reference to the parent clocks - - - #clock-cells: Must be 0 - - - reg: Two rate selector (Multiply / Divide) register address - -Example -------- - - pllclk: pllclk { - compatible = "renesas,h8s2678-pll-clock"; - clocks = <&xclk>; - #clock-cells = <0>; - reg = <0xfee03b 2>, <0xfee045 2>; - }; diff --git a/dts/Bindings/clock/renesas,r9a06g032-sysctrl.yaml b/dts/Bindings/clock/renesas,r9a06g032-sysctrl.yaml index 25dbb0fac0..95bf485c6c 100644 --- a/dts/Bindings/clock/renesas,r9a06g032-sysctrl.yaml +++ b/dts/Bindings/clock/renesas,r9a06g032-sysctrl.yaml @@ -39,6 +39,17 @@ properties: '#power-domain-cells': const: 0 + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +patternProperties: + "^dma-router@[a-f0-9]+$": + type: object + $ref: "../dma/renesas,rzn1-dmamux.yaml#" + required: - compatible - reg diff --git a/dts/Bindings/clock/renesas,rzg2l-cpg.yaml b/dts/Bindings/clock/renesas,rzg2l-cpg.yaml index bd3af8fc61..8880b834f2 100644 --- a/dts/Bindings/clock/renesas,rzg2l-cpg.yaml +++ b/dts/Bindings/clock/renesas,rzg2l-cpg.yaml @@ -4,14 +4,15 @@ $id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: Renesas RZ/{G2L,V2L} Clock Pulse Generator / Module Standby Mode +title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode maintainers: - Geert Uytterhoeven description: | - On Renesas RZ/{G2L,V2L} SoC, the CPG (Clock Pulse Generator) and Module - Standby Mode share the same register block. + On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module + Standby Mode share the same register block. On RZ/V2M, the functionality is + similar, but does not have Clock Monitor Registers. They provide the following functionalities: - The CPG block generates various core clocks, @@ -23,8 +24,10 @@ description: | properties: compatible: enum: - - renesas,r9a07g044-cpg # RZ/G2{L,LC} - - renesas,r9a07g054-cpg # RZ/V2L + - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} + - renesas,r9a07g044-cpg # RZ/G2{L,LC} + - renesas,r9a07g054-cpg # RZ/V2L + - renesas,r9a09g011-cpg # RZ/V2M reg: maxItems: 1 @@ -42,9 +45,10 @@ properties: description: | - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" and a core clock reference, as defined in - + - For module clocks, the two clock specifier cells must be "CPG_MOD" and - a module number, as defined in the . + a module number, as defined in the or + . const: 2 '#power-domain-cells': @@ -58,7 +62,7 @@ properties: '#reset-cells': description: The single reset specifier cell must be the module number, as defined in - the . + the or . const: 1 required: diff --git a/dts/Bindings/clock/rockchip,px30-cru.txt b/dts/Bindings/clock/rockchip,px30-cru.txt deleted file mode 100644 index 55e78cddec..0000000000 --- a/dts/Bindings/clock/rockchip,px30-cru.txt +++ /dev/null @@ -1,70 +0,0 @@ -* Rockchip PX30 Clock and Reset Unit - -The PX30 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: PMU for CRU should be "rockchip,px30-pmu-cru" -- compatible: CRU should be "rockchip,px30-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- clocks: A list of phandle + clock-specifier pairs for the clocks listed - in clock-names -- clock-names: Should contain the following: - - "xin24m" for both PMUCRU and CRU - - "gpll" for CRU (sourced from PMUCRU) -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing, pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "i2sx_clkin" - external I2S clock - optional, - - "gmac_clkin" - external GMAC clock - optional - -Example: Clock controller node: - - pmucru: clock-controller@ff2bc000 { - compatible = "rockchip,px30-pmucru"; - reg = <0x0 0xff2bc000 0x0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - cru: clock-controller@ff2b0000 { - compatible = "rockchip,px30-cru"; - reg = <0x0 0xff2b0000 0x0 0x1000>; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@ff030000 { - compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff030000 0x0 0x100>; - interrupts = ; - clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>; - clock-names = "baudclk", "apb_pclk"; - reg-shift = <2>; - reg-io-width = <4>; - }; diff --git a/dts/Bindings/clock/rockchip,px30-cru.yaml b/dts/Bindings/clock/rockchip,px30-cru.yaml new file mode 100644 index 0000000000..3eec381c7c --- /dev/null +++ b/dts/Bindings/clock/rockchip,px30-cru.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip PX30 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang + - Heiko Stuebner + +description: | + The PX30 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - rtc clock - optional + - "i2sx_clkin" - external I2S clock - optional + - "gmac_clkin" - external GMAC clock - optional + +properties: + compatible: + enum: + - rockchip,px30-cru + - rockchip,px30-pmucru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + minItems: 1 + items: + - description: Clock for both PMUCRU and CRU + - description: Clock for CRU (sourced from PMUCRU) + + clock-names: + minItems: 1 + items: + - const: xin24m + - const: gpll + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + - "#reset-cells" + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,px30-cru + + then: + properties: + clocks: + minItems: 2 + + clock-names: + minItems: 2 + + else: + properties: + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include + + pmucru: clock-controller@ff2bc000 { + compatible = "rockchip,px30-pmucru"; + reg = <0xff2bc000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@ff2b0000 { + compatible = "rockchip,px30-cru"; + reg = <0xff2b0000 0x1000>; + clocks = <&xin24m>, <&pmucru PLL_GPLL>; + clock-names = "xin24m", "gpll"; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3036-cru.txt b/dts/Bindings/clock/rockchip,rk3036-cru.txt deleted file mode 100644 index 20df350b9e..0000000000 --- a/dts/Bindings/clock/rockchip,rk3036-cru.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Rockchip RK3036 Clock and Reset Unit - -The RK3036 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3036-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "ext_i2s" - external I2S clock - optional, - - "rmii_clkin" - external EMAC clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3036-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@20060000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20060000 0x100>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/dts/Bindings/clock/rockchip,rk3036-cru.yaml b/dts/Bindings/clock/rockchip,rk3036-cru.yaml new file mode 100644 index 0000000000..1376230fed --- /dev/null +++ b/dts/Bindings/clock/rockchip,rk3036-cru.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3036 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang + - Heiko Stuebner + +description: | + The RK3036 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "ext_i2s" - external I2S clock - optional + - "rmii_clkin" - external EMAC clock - optional + +properties: + compatible: + enum: + - rockchip,rk3036-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3036-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3188-cru.txt b/dts/Bindings/clock/rockchip,rk3188-cru.txt deleted file mode 100644 index 7f368530a2..0000000000 --- a/dts/Bindings/clock/rockchip,rk3188-cru.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Rockchip RK3188/RK3066 Clock and Reset Unit - -The RK3188/RK3066 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or - "rockchip,rk3066a-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3188-cru.h and -dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. -Similar macros exist for the reset sources in these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "xin27m" - 27mhz crystal input on rk3066 - optional, - - "ext_hsadc" - external HSADC clock - optional, - - "ext_cif0" - external camera clock - optional, - - "ext_rmii" - external RMII clock - optional, - - "ext_jtag" - externalJTAG clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3188-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/dts/Bindings/clock/rockchip,rk3188-cru.yaml b/dts/Bindings/clock/rockchip,rk3188-cru.yaml new file mode 100644 index 0000000000..ddd7e46af0 --- /dev/null +++ b/dts/Bindings/clock/rockchip,rk3188-cru.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang + - Heiko Stuebner + +description: | + The RK3188/RK3066 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3188-cru.h and + dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. + Similar macros exist for the reset sources in these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - RTC clock - optional + - "xin27m" - 27mhz crystal input on RK3066 - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_cif0" - external camera clock - optional + - "ext_rmii" - external RMII clock - optional + - "ext_jtag" - external JTAG clock - optional + +properties: + compatible: + enum: + - rockchip,rk3066a-cru + - rockchip,rk3188-cru + - rockchip,rk3188a-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3188-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3228-cru.txt b/dts/Bindings/clock/rockchip,rk3228-cru.txt deleted file mode 100644 index f323048127..0000000000 --- a/dts/Bindings/clock/rockchip,rk3228-cru.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Rockchip RK3228 Clock and Reset Unit - -The RK3228 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3228-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "ext_i2s" - external I2S clock - optional, - - "ext_gmac" - external GMAC clock - optional - - "ext_hsadc" - external HSADC clock - optional - - "phy_50m_out" - output clock of the pll in the mac phy - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3228-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10110000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10110000 0x100>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/dts/Bindings/clock/rockchip,rk3228-cru.yaml b/dts/Bindings/clock/rockchip,rk3228-cru.yaml new file mode 100644 index 0000000000..cf7dc01d94 --- /dev/null +++ b/dts/Bindings/clock/rockchip,rk3228-cru.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3228-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3228 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang + - Heiko Stuebner + +description: | + The RK3228 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "ext_hsadc" - external HSADC clock - optional + - "phy_50m_out" - output clock of the pll in the mac phy + +properties: + compatible: + enum: + - rockchip,rk3228-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3228-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3288-cru.txt b/dts/Bindings/clock/rockchip,rk3288-cru.txt deleted file mode 100644 index bf3a9ec192..0000000000 --- a/dts/Bindings/clock/rockchip,rk3288-cru.txt +++ /dev/null @@ -1,67 +0,0 @@ -* Rockchip RK3288 Clock and Reset Unit - -The RK3288 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -A revision of this SoC is available: rk3288w. The clock tree is a bit -different so another dt-compatible is available. Noticed that it is only -setting the difference but there is no automatic revision detection. This -should be performed by bootloaders. - -Required Properties: - -- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in - case of this revision of Rockchip rk3288. -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "ext_i2s" - external I2S clock - optional, - - "ext_hsadc" - external HSADC clock - optional, - - "ext_edp_24m" - external display port clock - optional, - - "ext_vip" - external VIP clock - optional, - - "ext_isp" - external ISP clock - optional, - - "ext_jtag" - external JTAG clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3188-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/dts/Bindings/clock/rockchip,rk3288-cru.yaml b/dts/Bindings/clock/rockchip,rk3288-cru.yaml new file mode 100644 index 0000000000..96bc05749e --- /dev/null +++ b/dts/Bindings/clock/rockchip,rk3288-cru.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3288 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang + - Heiko Stuebner + +description: | + The RK3288 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + + A revision of this SoC is available: rk3288w. The clock tree is a bit + different so another dt-compatible is available. Noticed that it is only + setting the difference but there is no automatic revision detection. This + should be performed by boot loaders. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "ext_i2s" - external I2S clock - optional, + - "ext_hsadc" - external HSADC clock - optional, + - "ext_edp_24m" - external display port clock - optional, + - "ext_vip" - external VIP clock - optional, + - "ext_isp" - external ISP clock - optional, + - "ext_jtag" - external JTAG clock - optional + +properties: + compatible: + enum: + - rockchip,rk3288-cru + - rockchip,rk3288w-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3288-cru"; + reg = <0xff760000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3308-cru.txt b/dts/Bindings/clock/rockchip,rk3308-cru.txt deleted file mode 100644 index 9b151c5b0c..0000000000 --- a/dts/Bindings/clock/rockchip,rk3308-cru.txt +++ /dev/null @@ -1,60 +0,0 @@ -* Rockchip RK3308 Clock and Reset Unit - -The RK3308 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: CRU should be "rockchip,rk3308-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing, pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", "mclk_i2s2_8ch_in", - "mclk_i2s3_8ch_in", "mclk_i2s0_2ch_in", - "mclk_i2s1_2ch_in" - external I2S or SPDIF clock - optional, - - "mac_clkin" - external MAC clock - optional - -Example: Clock controller node: - - cru: clock-controller@ff500000 { - compatible = "rockchip,rk3308-cru"; - reg = <0x0 0xff500000 0x0 0x1000>; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@ff0a0000 { - compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff0a0000 0x0 0x100>; - interrupts = ; - clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; diff --git a/dts/Bindings/clock/rockchip,rk3308-cru.yaml b/dts/Bindings/clock/rockchip,rk3308-cru.yaml new file mode 100644 index 0000000000..523ee578a5 --- /dev/null +++ b/dts/Bindings/clock/rockchip,rk3308-cru.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3308-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3308 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang + - Heiko Stuebner + +description: | + The RK3308 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - rtc clock - optional + - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", + "mclk_i2s2_8ch_in", "mclk_i2s3_8ch_in", + "mclk_i2s0_2ch_in", "mclk_i2s1_2ch_in" - external I2S or + SPDIF clock - optional + - "mac_clkin" - external MAC clock - optional + +properties: + compatible: + enum: + - rockchip,rk3308-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff500000 { + compatible = "rockchip,rk3308-cru"; + reg = <0xff500000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3368-cru.txt b/dts/Bindings/clock/rockchip,rk3368-cru.txt deleted file mode 100644 index 7c8bbcfed8..0000000000 --- a/dts/Bindings/clock/rockchip,rk3368-cru.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Rockchip RK3368 Clock and Reset Unit - -The RK3368 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3368-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing, pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "ext_i2s" - external I2S clock - optional, - - "ext_gmac" - external GMAC clock - optional - - "ext_hsadc" - external HSADC clock - optional, - - "ext_isp" - external ISP clock - optional, - - "ext_jtag" - external JTAG clock - optional - - "ext_vip" - external VIP clock - optional, - - "usbotg_out" - output clock of the pll in the otg phy - -Example: Clock controller node: - - cru: clock-controller@ff760000 { - compatible = "rockchip,rk3368-cru"; - reg = <0x0 0xff760000 0x0 0x1000>; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/dts/Bindings/clock/rockchip,rk3368-cru.yaml b/dts/Bindings/clock/rockchip,rk3368-cru.yaml new file mode 100644 index 0000000000..adb6787772 --- /dev/null +++ b/dts/Bindings/clock/rockchip,rk3368-cru.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3368-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3368 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang + - Heiko Stuebner + +description: | + The RK3368 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - rtc clock - optional + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_isp" - external ISP clock - optional + - "ext_jtag" - external JTAG clock - optional + - "ext_vip" - external VIP clock - optional + - "usbotg_out" - output clock of the pll in the otg phy + +properties: + compatible: + enum: + - rockchip,rk3368-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3368-cru"; + reg = <0xff760000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3399-cru.yaml b/dts/Bindings/clock/rockchip,rk3399-cru.yaml index 72b286a1be..54da1e31ea 100644 --- a/dts/Bindings/clock/rockchip,rk3399-cru.yaml +++ b/dts/Bindings/clock/rockchip,rk3399-cru.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Rockchip RK3399 Clock and Reset Unit maintainers: - - Xing Zheng + - Elaine Zhang - Heiko Stuebner description: | @@ -22,11 +22,11 @@ description: | There are several clocks that are generated outside the SoC. It is expected that they are defined using standard clock bindings with following clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "clkin_gmac" - external GMAC clock - optional, - - "clkin_i2s" - external I2S clock - optional, - - "pclkin_cif" - external ISP clock - optional, + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "clkin_gmac" - external GMAC clock - optional, + - "clkin_i2s" - external I2S clock - optional, + - "pclkin_cif" - external ISP clock - optional, - "clk_usbphy0_480m" - output clock of the pll in the usbphy0 - "clk_usbphy1_480m" - output clock of the pll in the usbphy1 @@ -46,24 +46,15 @@ properties: const: 1 clocks: - minItems: 1 - - assigned-clocks: - minItems: 1 - maxItems: 64 - - assigned-clock-parents: - minItems: 1 - maxItems: 64 + maxItems: 1 - assigned-clock-rates: - minItems: 1 - maxItems: 64 + clock-names: + const: xin24m rockchip,grf: $ref: /schemas/types.yaml#/definitions/phandle - description: > - phandle to the syscon managing the "general register files". It is used + description: + Phandle to the syscon managing the "general register files". It is used for GRF muxes, if missing any muxes present in the GRF will not be available. @@ -77,7 +68,7 @@ additionalProperties: false examples: - | - pmucru: pmu-clock-controller@ff750000 { + pmucru: clock-controller@ff750000 { compatible = "rockchip,rk3399-pmucru"; reg = <0xff750000 0x1000>; #clock-cells = <1>; diff --git a/dts/Bindings/clock/rockchip,rk3568-cru.yaml b/dts/Bindings/clock/rockchip,rk3568-cru.yaml index b2c2609782..fc7546f521 100644 --- a/dts/Bindings/clock/rockchip,rk3568-cru.yaml +++ b/dts/Bindings/clock/rockchip,rk3568-cru.yaml @@ -34,6 +34,19 @@ properties: "#reset-cells": const: 1 + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + required: - compatible - reg diff --git a/dts/Bindings/clock/rockchip,rv1108-cru.txt b/dts/Bindings/clock/rockchip,rv1108-cru.txt deleted file mode 100644 index 161326a4f9..0000000000 --- a/dts/Bindings/clock/rockchip,rv1108-cru.txt +++ /dev/null @@ -1,59 +0,0 @@ -* Rockchip RV1108 Clock and Reset Unit - -The RV1108 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rv1108-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "ext_vip" - external VIP clock - optional - - "ext_i2s" - external I2S clock - optional - - "ext_gmac" - external GMAC clock - optional - - "hdmiphy" - external clock input derived from HDMI PHY - optional - - "usbphy" - external clock input derived from USB PHY - optional - -Example: Clock controller node: - - cru: cru@20200000 { - compatible = "rockchip,rv1108-cru"; - reg = <0x20200000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10230000 { - compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; - reg = <0x10230000 0x100>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/dts/Bindings/clock/rockchip,rv1108-cru.yaml b/dts/Bindings/clock/rockchip,rv1108-cru.yaml new file mode 100644 index 0000000000..20421c22f1 --- /dev/null +++ b/dts/Bindings/clock/rockchip,rv1108-cru.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rv1108-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RV1108 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang + - Heiko Stuebner + +description: | + The RV1108 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "ext_vip" - external VIP clock - optional + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "hdmiphy" - external clock input derived from HDMI PHY - optional + - "usbphy" - external clock input derived from USB PHY - optional + +properties: + compatible: + enum: + - rockchip,rv1108-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20200000 { + compatible = "rockchip,rv1108-cru"; + reg = <0x20200000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/samsung,exynos4412-isp-clock.yaml b/dts/Bindings/clock/samsung,exynos4412-isp-clock.yaml index b644bbd0df..bee13436d1 100644 --- a/dts/Bindings/clock/samsung,exynos4412-isp-clock.yaml +++ b/dts/Bindings/clock/samsung,exynos4412-isp-clock.yaml @@ -61,4 +61,3 @@ examples: clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>; clock-names = "aclk200", "aclk400_mcuisp"; }; - diff --git a/dts/Bindings/clock/samsung,exynosautov9-clock.yaml b/dts/Bindings/clock/samsung,exynosautov9-clock.yaml new file mode 100644 index 0000000000..eafc715d2d --- /dev/null +++ b/dts/Bindings/clock/samsung,exynosautov9-clock.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Auto v9 SoC clock controller + +maintainers: + - Chanho Park + - Chanwoo Choi + - Krzysztof Kozlowski + - Sylwester Nawrocki + - Tomasz Figa + +description: | + Exynos Auto v9 clock controller is comprised of several CMU units, generating + clocks for different domains. Those CMU units are modeled as separate device + tree nodes, and might depend on each other. Root clocks in that clock tree are + two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz). + The external OSCCLK must be defined as fixed-rate clock in dts. + + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and + dividers; all other clocks of function blocks (other CMUs) are usually + derived from CMU_TOP. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All clocks available for usage + in clock consumer nodes are defined as preprocessor macros in + 'include/dt-bindings/clock/samsung,exynosautov9.h' header. + +properties: + compatible: + enum: + - samsung,exynosautov9-cmu-top + - samsung,exynosautov9-cmu-busmc + - samsung,exynosautov9-cmu-core + - samsung,exynosautov9-cmu-fsys2 + - samsung,exynosautov9-cmu-peric0 + - samsung,exynosautov9-cmu-peric1 + - samsung,exynosautov9-cmu-peris + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-top + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + + clock-names: + items: + - const: oscclk + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-busmc + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_BUSMC bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_busmc_bus + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-core + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_CORE bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_core_bus + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-fsys2 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_FSYS2 bus clock (from CMU_TOP) + - description: UFS clock (from CMU_TOP) + - description: Ethernet clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_fsys2_bus + - const: dout_fsys2_clkcmu_ufs_embd + - const: dout_fsys2_clkcmu_ethernet + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peric0 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIC0 bus clock (from CMU_TOP) + - description: PERIC0 IP clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peric0_bus + - const: dout_clkcmu_peric0_ip + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peric1 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIC1 bus clock (from CMU_TOP) + - description: PERIC1 IP clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peric1_bus + - const: dout_clkcmu_peric1_ip + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peris + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIS bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peris_bus + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - reg + +additionalProperties: false + +examples: + # Clock controller node for CMU_FSYS2 + - | + #include + + cmu_fsys2: clock-controller@17c00000 { + compatible = "samsung,exynosautov9-cmu-fsys2"; + reg = <0x17c00000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_FSYS2_BUS>, + <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>, + <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>; + clock-names = "oscclk", + "dout_clkcmu_fsys2_bus", + "dout_fsys2_clkcmu_ufs_embd", + "dout_fsys2_clkcmu_ethernet"; + }; + +... diff --git a/dts/Bindings/clock/st,stm32mp1-rcc.yaml b/dts/Bindings/clock/st,stm32mp1-rcc.yaml index a0ae4867ed..f8c4742278 100644 --- a/dts/Bindings/clock/st,stm32mp1-rcc.yaml +++ b/dts/Bindings/clock/st,stm32mp1-rcc.yaml @@ -41,6 +41,7 @@ description: | The list of valid indices for STM32MP1 is available in: include/dt-bindings/reset-controller/stm32mp1-resets.h + include/dt-bindings/reset-controller/stm32mp13-resets.h This file implements defines like: #define LTDC_R 3072 @@ -57,7 +58,10 @@ properties: - enum: - st,stm32mp1-rcc-secure - st,stm32mp1-rcc + - st,stm32mp13-rcc - const: syscon + clocks: true + clock-names: true reg: maxItems: 1 @@ -68,14 +72,53 @@ required: - compatible - reg +if: + properties: + compatible: + contains: + enum: + - st,stm32mp1-rcc-secure +then: + properties: + clocks: + description: Specifies oscillators. + maxItems: 5 + + clock-names: + items: + - const: hse + - const: hsi + - const: csi + - const: lse + - const: lsi + required: + - clocks + - clock-names +else: + properties: + clocks: + description: + Specifies the external RX clock for ethernet MAC. + maxItems: 1 + + clock-names: + const: ETH_RX_CLK/ETH_REF_CLK + additionalProperties: false examples: - | + #include rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc-secure", "syscon"; reg = <0x50000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; }; ... diff --git a/dts/Bindings/clock/stericsson,u8500-clks.yaml b/dts/Bindings/clock/stericsson,u8500-clks.yaml index 9bc95a3084..2150307219 100644 --- a/dts/Bindings/clock/stericsson,u8500-clks.yaml +++ b/dts/Bindings/clock/stericsson,u8500-clks.yaml @@ -109,6 +109,25 @@ properties: additionalProperties: false + clkout-clock: + description: A subnode with three clock cells for externally routed clocks, + output clocks. These are two PRCMU-internal clocks that can be divided and + muxed out on the pads of the DB8500 SoC. + type: object + + properties: + '#clock-cells': + description: + The first cell indicates which output clock we are using, + possible values are 0 (CLKOUT1) and 1 (CLKOUT2). + The second cell indicates which clock we want to use as source, + possible values are 0 thru 7, see the defines for the different + source clocks. + The third cell is a divider, legal values are 1 thru 63. + const: 3 + + additionalProperties: false + required: - compatible - reg @@ -119,3 +138,41 @@ required: - smp-twd-clock additionalProperties: false + +examples: + - | + #include + clocks@8012 { + compatible = "stericsson,u8500-clks"; + reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>, + <0x8000f000 0x1000>, <0xa03ff000 0x1000>, + <0xa03cf000 0x1000>; + + prcmu_clk: prcmu-clock { + #clock-cells = <1>; + }; + + prcc_pclk: prcc-periph-clock { + #clock-cells = <2>; + }; + + prcc_kclk: prcc-kernel-clock { + #clock-cells = <2>; + }; + + prcc_reset: prcc-reset-controller { + #reset-cells = <2>; + }; + + rtc_clk: rtc32k-clock { + #clock-cells = <0>; + }; + + smp_twd_clk: smp-twd-clock { + #clock-cells = <0>; + }; + + clkout_clk: clkout-clock { + #clock-cells = <3>; + }; + }; diff --git a/dts/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/dts/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml index 9b537bc876..66765116af 100644 --- a/dts/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml +++ b/dts/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml @@ -15,6 +15,7 @@ properties: - enum: - ti,am654-ehrpwm-tbclk - ti,am64-epwm-tbclk + - ti,am62-epwm-tbclk - const: syscon "#clock-cells": diff --git a/dts/Bindings/clock/ti-clkctrl.txt b/dts/Bindings/clock/ti-clkctrl.txt index 18af6b9409..d20db7974a 100644 --- a/dts/Bindings/clock/ti-clkctrl.txt +++ b/dts/Bindings/clock/ti-clkctrl.txt @@ -21,6 +21,7 @@ Required properties : "ti,clkctrl-l4-per" "ti,clkctrl-l4-secure" "ti,clkctrl-l4-wkup" +- clock-output-names : from common clock binding - #clock-cells : shall contain 2 with the first entry being the instance offset from the clock domain base and the second being the clock index @@ -32,7 +33,8 @@ Example: Clock controller node on omap 4430: l4per: cm@1400 { cm_l4per@0 { cm_l4per_clkctrl: clock@20 { - compatible = "ti,clkctrl-l4-per", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4_per"; reg = <0x20 0x1b0>; #clock-cells = <2>; }; diff --git a/dts/Bindings/clock/ti/clockdomain.txt b/dts/Bindings/clock/ti/clockdomain.txt index cb76b3f2b3..9c6199249c 100644 --- a/dts/Bindings/clock/ti/clockdomain.txt +++ b/dts/Bindings/clock/ti/clockdomain.txt @@ -17,6 +17,9 @@ Required properties: - #clock-cells : from common clock binding; shall be set to 0. - clocks : link phandles of clocks within this domain +Optional properties: +- clock-output-names : from common clock binding. + Examples: dss_clkdm: dss_clkdm { compatible = "ti,clockdomain"; diff --git a/dts/Bindings/clock/ti/composite.txt b/dts/Bindings/clock/ti/composite.txt index 5f43c4706b..33ac7c9ad0 100644 --- a/dts/Bindings/clock/ti/composite.txt +++ b/dts/Bindings/clock/ti/composite.txt @@ -27,6 +27,9 @@ Required properties: - clocks : link phandles of component clocks - #clock-cells : from common clock binding; shall be set to 0. +Optional properties: +- clock-output-names : from common clock binding. + Examples: usb_l4_gate_ick: usb_l4_gate_ick { diff --git a/dts/Bindings/clock/ti/fixed-factor-clock.txt b/dts/Bindings/clock/ti/fixed-factor-clock.txt index 662b36d53b..518e3c1422 100644 --- a/dts/Bindings/clock/ti/fixed-factor-clock.txt +++ b/dts/Bindings/clock/ti/fixed-factor-clock.txt @@ -16,6 +16,7 @@ Required properties: - clocks: parent clock. Optional properties: +- clock-output-names : from common clock binding. - ti,autoidle-shift: bit shift of the autoidle enable bit for the clock, see [2] - reg: offset for the autoidle register of this clock, see [2] diff --git a/dts/Bindings/clock/ti/gate.txt b/dts/Bindings/clock/ti/gate.txt index 56d603c1f7..b4820b1de4 100644 --- a/dts/Bindings/clock/ti/gate.txt +++ b/dts/Bindings/clock/ti/gate.txt @@ -36,6 +36,7 @@ Required properties: ti,clkdm-gate-clock type Optional properties: +- clock-output-names : from common clock binding. - ti,bit-shift : bit shift for programming the clock gate, invalid for ti,clkdm-gate-clock type - ti,set-bit-to-disable : inverts default gate programming. Setting the bit diff --git a/dts/Bindings/clock/ti/interface.txt b/dts/Bindings/clock/ti/interface.txt index 3f47040401..94ec77dc3c 100644 --- a/dts/Bindings/clock/ti/interface.txt +++ b/dts/Bindings/clock/ti/interface.txt @@ -28,6 +28,7 @@ Required properties: - reg : base address for the control register Optional properties: +- clock-output-names : from common clock binding. - ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0) Examples: diff --git a/dts/Bindings/clock/ti/mux.txt b/dts/Bindings/clock/ti/mux.txt index eec8994b9b..e17425a586 100644 --- a/dts/Bindings/clock/ti/mux.txt +++ b/dts/Bindings/clock/ti/mux.txt @@ -42,6 +42,7 @@ Required properties: - reg : register offset for register controlling adjustable mux Optional properties: +- clock-output-names : from common clock binding. - ti,bit-shift : number of bits to shift the bit-mask, defaults to 0 if not present - ti,index-starts-at-one : valid input select programming starts at 1, not diff --git a/dts/Bindings/cpufreq/cpufreq-mediatek.txt b/dts/Bindings/cpufreq/cpufreq-mediatek.txt index b8233ec91d..e0a4ba599a 100644 --- a/dts/Bindings/cpufreq/cpufreq-mediatek.txt +++ b/dts/Bindings/cpufreq/cpufreq-mediatek.txt @@ -20,6 +20,13 @@ Optional properties: Vsram to fit SoC specific needs. When absent, the voltage scaling flow is handled by hardware, hence no software "voltage tracking" is needed. +- mediatek,cci: + Used to confirm the link status between cpufreq and mediatek cci. Because + cpufreq and mediatek cci could share the same regulator in some MediaTek SoCs. + To prevent the issue of high frequency and low voltage, we need to use this + property to make sure mediatek cci is ready. + For details of mediatek cci, please refer to + Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml - #cooling-cells: For details, please refer to Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml diff --git a/dts/Bindings/crypto/allwinner,sun8i-ce.yaml b/dts/Bindings/crypto/allwinner,sun8i-ce.yaml index 00648f9d92..026a9f9e1a 100644 --- a/dts/Bindings/crypto/allwinner,sun8i-ce.yaml +++ b/dts/Bindings/crypto/allwinner,sun8i-ce.yaml @@ -82,4 +82,3 @@ examples: clock-names = "bus", "mod"; resets = <&ccu RST_BUS_CE>; }; - diff --git a/dts/Bindings/crypto/ti,sa2ul.yaml b/dts/Bindings/crypto/ti,sa2ul.yaml index a410d2cedd..02f47c2e79 100644 --- a/dts/Bindings/crypto/ti,sa2ul.yaml +++ b/dts/Bindings/crypto/ti,sa2ul.yaml @@ -15,6 +15,7 @@ properties: - ti,j721e-sa2ul - ti,am654-sa2ul - ti,am64-sa2ul + - ti,am62-sa3ul reg: maxItems: 1 diff --git a/dts/Bindings/devfreq/rk3399_dmc.txt b/dts/Bindings/devfreq/rk3399_dmc.txt deleted file mode 100644 index 58fc8a6ceb..0000000000 --- a/dts/Bindings/devfreq/rk3399_dmc.txt +++ /dev/null @@ -1,212 +0,0 @@ -* Rockchip rk3399 DMC (Dynamic Memory Controller) device - -Required properties: -- compatible: Must be "rockchip,rk3399-dmc". -- devfreq-events: Node to get DDR loading, Refer to - Documentation/devicetree/bindings/devfreq/event/ - rockchip-dfi.txt -- clocks: Phandles for clock specified in "clock-names" property -- clock-names : The name of clock used by the DFI, must be - "pclk_ddr_mon"; -- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml - for details. -- center-supply: DMC supply node. -- status: Marks the node enabled/disabled. -- rockchip,pmu: Phandle to the syscon managing the "PMU general register - files". - -Optional properties: -- interrupts: The CPU interrupt number. The interrupt specifier - format depends on the interrupt controller. - It should be a DCF interrupt. When DDR DVFS finishes - a DCF interrupt is triggered. -- rockchip,pmu: Phandle to the syscon managing the "PMU general register - files". - -Following properties relate to DDR timing: - -- rockchip,dram_speed_bin : Value reference include/dt-bindings/clock/rk3399-ddr.h, - it selects the DDR3 cl-trp-trcd type. It must be - set according to "Speed Bin" in DDR3 datasheet, - DO NOT use a smaller "Speed Bin" than specified - for the DDR3 being used. - -- rockchip,pd_idle : Configure the PD_IDLE value. Defines the - power-down idle period in which memories are - placed into power-down mode if bus is idle - for PD_IDLE DFI clock cycles. - -- rockchip,sr_idle : Configure the SR_IDLE value. Defines the - self-refresh idle period in which memories are - placed into self-refresh mode if bus is idle - for SR_IDLE * 1024 DFI clock cycles (DFI - clocks freq is half of DRAM clock), default - value is "0". - -- rockchip,sr_mc_gate_idle : Defines the memory self-refresh and controller - clock gating idle period. Memories are placed - into self-refresh mode and memory controller - clock arg gating started if bus is idle for - sr_mc_gate_idle*1024 DFI clock cycles. - -- rockchip,srpd_lite_idle : Defines the self-refresh power down idle - period in which memories are placed into - self-refresh power down mode if bus is idle - for srpd_lite_idle * 1024 DFI clock cycles. - This parameter is for LPDDR4 only. - -- rockchip,standby_idle : Defines the standby idle period in which - memories are placed into self-refresh mode. - The controller, pi, PHY and DRAM clock will - be gated if bus is idle for standby_idle * DFI - clock cycles. - -- rockchip,dram_dll_dis_freq : Defines the DDR3 DLL bypass frequency in MHz. - When DDR frequency is less than DRAM_DLL_DISB_FREQ, - DDR3 DLL will be bypassed. Note: if DLL was bypassed, - the odt will also stop working. - -- rockchip,phy_dll_dis_freq : Defines the PHY dll bypass frequency in - MHz (Mega Hz). When DDR frequency is less than - DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed. - Note: PHY DLL and PHY ODT are independent. - -- rockchip,ddr3_odt_dis_freq : When the DRAM type is DDR3, this parameter defines - the ODT disable frequency in MHz (Mega Hz). - when the DDR frequency is less then ddr3_odt_dis_freq, - the ODT on the DRAM side and controller side are - both disabled. - -- rockchip,ddr3_drv : When the DRAM type is DDR3, this parameter defines - the DRAM side driver strength in ohms. Default - value is 40. - -- rockchip,ddr3_odt : When the DRAM type is DDR3, this parameter defines - the DRAM side ODT strength in ohms. Default value - is 120. - -- rockchip,phy_ddr3_ca_drv : When the DRAM type is DDR3, this parameter defines - the phy side CA line (incluing command line, - address line and clock line) driver strength. - Default value is 40. - -- rockchip,phy_ddr3_dq_drv : When the DRAM type is DDR3, this parameter defines - the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is 40. - -- rockchip,phy_ddr3_odt : When the DRAM type is DDR3, this parameter defines - the PHY side ODT strength. Default value is 240. - -- rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines - then ODT disable frequency in MHz (Mega Hz). - When DDR frequency is less then ddr3_odt_dis_freq, - the ODT on the DRAM side and controller side are - both disabled. - -- rockchip,lpddr3_drv : When the DRAM type is LPDDR3, this parameter defines - the DRAM side driver strength in ohms. Default - value is 34. - -- rockchip,lpddr3_odt : When the DRAM type is LPDDR3, this parameter defines - the DRAM side ODT strength in ohms. Default value - is 240. - -- rockchip,phy_lpddr3_ca_drv : When the DRAM type is LPDDR3, this parameter defines - the PHY side CA line (including command line, - address line and clock line) driver strength. - Default value is 40. - -- rockchip,phy_lpddr3_dq_drv : When the DRAM type is LPDDR3, this parameter defines - the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is 40. - -- rockchip,phy_lpddr3_odt : When dram type is LPDDR3, this parameter define - the phy side odt strength, default value is 240. - -- rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter - defines the ODT disable frequency in - MHz (Mega Hz). When the DDR frequency is less then - ddr3_odt_dis_freq, the ODT on the DRAM side and - controller side are both disabled. - -- rockchip,lpddr4_drv : When the DRAM type is LPDDR4, this parameter defines - the DRAM side driver strength in ohms. Default - value is 60. - -- rockchip,lpddr4_dq_odt : When the DRAM type is LPDDR4, this parameter defines - the DRAM side ODT on DQS/DQ line strength in ohms. - Default value is 40. - -- rockchip,lpddr4_ca_odt : When the DRAM type is LPDDR4, this parameter defines - the DRAM side ODT on CA line strength in ohms. - Default value is 40. - -- rockchip,phy_lpddr4_ca_drv : When the DRAM type is LPDDR4, this parameter defines - the PHY side CA line (including command address - line) driver strength. Default value is 40. - -- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines - the PHY side clock line and CS line driver - strength. Default value is 80. - -- rockchip,phy_lpddr4_dq_drv : When the DRAM type is LPDDR4, this parameter defines - the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is 80. - -- rockchip,phy_lpddr4_odt : When the DRAM type is LPDDR4, this parameter defines - the PHY side ODT strength. Default value is 60. - -Example: - dmc_opp_table: dmc_opp_table { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <900000>; - }; - opp01 { - opp-hz = /bits/ 64 <666000000>; - opp-microvolt = <900000>; - }; - }; - - dmc: dmc { - compatible = "rockchip,rk3399-dmc"; - devfreq-events = <&dfi>; - interrupts = ; - clocks = <&cru SCLK_DDRC>; - clock-names = "dmc_clk"; - operating-points-v2 = <&dmc_opp_table>; - center-supply = <&ppvar_centerlogic>; - upthreshold = <15>; - downdifferential = <10>; - rockchip,ddr3_speed_bin = <21>; - rockchip,pd_idle = <0x40>; - rockchip,sr_idle = <0x2>; - rockchip,sr_mc_gate_idle = <0x3>; - rockchip,srpd_lite_idle = <0x4>; - rockchip,standby_idle = <0x2000>; - rockchip,dram_dll_dis_freq = <300>; - rockchip,phy_dll_dis_freq = <125>; - rockchip,auto_pd_dis_freq = <666>; - rockchip,ddr3_odt_dis_freq = <333>; - rockchip,ddr3_drv = <40>; - rockchip,ddr3_odt = <120>; - rockchip,phy_ddr3_ca_drv = <40>; - rockchip,phy_ddr3_dq_drv = <40>; - rockchip,phy_ddr3_odt = <240>; - rockchip,lpddr3_odt_dis_freq = <333>; - rockchip,lpddr3_drv = <34>; - rockchip,lpddr3_odt = <240>; - rockchip,phy_lpddr3_ca_drv = <40>; - rockchip,phy_lpddr3_dq_drv = <40>; - rockchip,phy_lpddr3_odt = <240>; - rockchip,lpddr4_odt_dis_freq = <333>; - rockchip,lpddr4_drv = <60>; - rockchip,lpddr4_dq_odt = <40>; - rockchip,lpddr4_ca_odt = <40>; - rockchip,phy_lpddr4_ca_drv = <40>; - rockchip,phy_lpddr4_ck_cs_drv = <80>; - rockchip,phy_lpddr4_dq_drv = <80>; - rockchip,phy_lpddr4_odt = <60>; - }; diff --git a/dts/Bindings/display/allwinner,sun4i-a10-display-engine.yaml b/dts/Bindings/display/allwinner,sun4i-a10-display-engine.yaml index d4412aea7b..c388ae5da1 100644 --- a/dts/Bindings/display/allwinner,sun4i-a10-display-engine.yaml +++ b/dts/Bindings/display/allwinner,sun4i-a10-display-engine.yaml @@ -62,6 +62,7 @@ properties: - allwinner,sun8i-r40-display-engine - allwinner,sun8i-v3s-display-engine - allwinner,sun9i-a80-display-engine + - allwinner,sun20i-d1-display-engine - allwinner,sun50i-a64-display-engine - allwinner,sun50i-h6-display-engine diff --git a/dts/Bindings/display/allwinner,sun4i-a10-tcon.yaml b/dts/Bindings/display/allwinner,sun4i-a10-tcon.yaml index 3a7d5d7317..4a92a4c7dc 100644 --- a/dts/Bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/dts/Bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -33,6 +33,8 @@ properties: - const: allwinner,sun8i-v3s-tcon - const: allwinner,sun9i-a80-tcon-lcd - const: allwinner,sun9i-a80-tcon-tv + - const: allwinner,sun20i-d1-tcon-lcd + - const: allwinner,sun20i-d1-tcon-tv - items: - enum: diff --git a/dts/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/dts/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml index 4f91eec26d..cb243bc58e 100644 --- a/dts/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml +++ b/dts/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml @@ -19,6 +19,8 @@ properties: - allwinner,sun8i-r40-de2-mixer-0 - allwinner,sun8i-r40-de2-mixer-1 - allwinner,sun8i-v3s-de2-mixer + - allwinner,sun20i-d1-de2-mixer-0 + - allwinner,sun20i-d1-de2-mixer-1 - allwinner,sun50i-a64-de2-mixer-0 - allwinner,sun50i-a64-de2-mixer-1 - allwinner,sun50i-h6-de3-mixer-0 diff --git a/dts/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/dts/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml index 61ef7b3372..845e226d7a 100644 --- a/dts/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml +++ b/dts/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml @@ -41,6 +41,7 @@ properties: compatible: enum: - allwinner,sun8i-r40-tcon-top + - allwinner,sun20i-d1-tcon-top - allwinner,sun50i-h6-tcon-top reg: @@ -48,31 +49,15 @@ properties: clocks: minItems: 2 - items: - - description: The TCON TOP interface clock - - description: The TCON TOP TV0 clock - - description: The TCON TOP TVE0 clock - - description: The TCON TOP TV1 clock - - description: The TCON TOP TVE1 clock - - description: The TCON TOP MIPI DSI clock + maxItems: 6 clock-names: minItems: 2 - items: - - const: bus - - const: tcon-tv0 - - const: tve0 - - const: tcon-tv1 - - const: tve1 - - const: dsi + maxItems: 6 clock-output-names: minItems: 1 maxItems: 3 - description: > - The first item is the name of the clock created for the TV0 - channel, the second item is the name of the TCON TV1 channel - clock and the third one is the name of the DSI channel clock. resets: maxItems: 1 @@ -129,32 +114,92 @@ required: additionalProperties: false -if: - properties: - compatible: - contains: - const: allwinner,sun50i-h6-tcon-top - -then: - properties: - clocks: - maxItems: 2 - - clock-output-names: - maxItems: 1 - -else: - properties: - clocks: - minItems: 6 - - clock-output-names: - minItems: 3 - - ports: - required: - - port@2 - - port@3 +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-r40-tcon-top + + then: + properties: + clocks: + items: + - description: The TCON TOP interface clock + - description: The TCON TOP TV0 clock + - description: The TCON TOP TVE0 clock + - description: The TCON TOP TV1 clock + - description: The TCON TOP TVE1 clock + - description: The TCON TOP MIPI DSI clock + + clock-names: + items: + - const: bus + - const: tcon-tv0 + - const: tve0 + - const: tcon-tv1 + - const: tve1 + - const: dsi + + clock-output-names: + items: + - description: TCON TV0 output clock name + - description: TCON TV1 output clock name + - description: DSI output clock name + + ports: + required: + - port@2 + - port@3 + + - if: + properties: + compatible: + contains: + const: allwinner,sun20i-d1-tcon-top + + then: + properties: + clocks: + items: + - description: The TCON TOP interface clock + - description: The TCON TOP TV0 clock + - description: The TCON TOP TVE0 clock + - description: The TCON TOP MIPI DSI clock + + clock-names: + items: + - const: bus + - const: tcon-tv0 + - const: tve0 + - const: dsi + + clock-output-names: + items: + - description: TCON TV0 output clock name + - description: DSI output clock name + + - if: + properties: + compatible: + contains: + const: allwinner,sun50i-h6-tcon-top + + then: + properties: + clocks: + items: + - description: The TCON TOP interface clock + - description: The TCON TOP TV0 clock + + clock-names: + items: + - const: bus + - const: tcon-tv0 + + clock-output-names: + items: + - description: TCON TV0 output clock name examples: - | diff --git a/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml b/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml index 343598c9f4..2e208d2fc9 100644 --- a/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml +++ b/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml @@ -150,4 +150,3 @@ examples: }; }; }; - diff --git a/dts/Bindings/display/arm,hdlcd.txt b/dts/Bindings/display/arm,hdlcd.txt deleted file mode 100644 index 78bc24296f..0000000000 --- a/dts/Bindings/display/arm,hdlcd.txt +++ /dev/null @@ -1,79 +0,0 @@ -ARM HDLCD - -This is a display controller found on several development platforms produced -by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB -streamer that reads the data from a framebuffer and sends it to a single -digital encoder (DVI or HDMI). - -Required properties: - - compatible: "arm,hdlcd" - - reg: Physical base address and length of the controller's registers. - - interrupts: One interrupt used by the display controller to notify the - interrupt controller when any of the interrupt sources programmed in - the interrupt mask register have activated. - - clocks: A list of phandle + clock-specifier pairs, one for each - entry in 'clock-names'. - - clock-names: A list of clock names. For HDLCD it should contain: - - "pxlclk" for the clock feeding the output PLL of the controller. - -Required sub-nodes: - - port: The HDLCD connection to an encoder chip. The connection is modeled - using the OF graph bindings specified in - Documentation/devicetree/bindings/graph.txt. - -Optional properties: - - memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be - used for the framebuffer; if not present, the framebuffer may be located - anywhere in memory. - - -Example: - -/ { - ... - - hdlcd@2b000000 { - compatible = "arm,hdlcd"; - reg = <0 0x2b000000 0 0x1000>; - interrupts = ; - clocks = <&oscclk5>; - clock-names = "pxlclk"; - port { - hdlcd_output: endpoint@0 { - remote-endpoint = <&hdmi_enc_input>; - }; - }; - }; - - /* HDMI encoder on I2C bus */ - i2c@7ffa0000 { - .... - hdmi-transmitter@70 { - compatible = "....."; - reg = <0x70>; - port@0 { - hdmi_enc_input: endpoint { - remote-endpoint = <&hdlcd_output>; - }; - - hdmi_enc_output: endpoint { - remote-endpoint = <&hdmi_1_port>; - }; - }; - }; - - }; - - hdmi1: connector@1 { - compatible = "hdmi-connector"; - type = "a"; - port { - hdmi_1_port: endpoint { - remote-endpoint = <&hdmi_enc_output>; - }; - }; - }; - - ... -}; diff --git a/dts/Bindings/display/arm,hdlcd.yaml b/dts/Bindings/display/arm,hdlcd.yaml new file mode 100644 index 0000000000..a2670258c4 --- /dev/null +++ b/dts/Bindings/display/arm,hdlcd.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,hdlcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm HDLCD display controller binding + +maintainers: + - Liviu Dudau + - Andre Przywara + +description: + The Arm HDLCD is a display controller found on several development platforms + produced by ARM Ltd and in more modern of its Fast Models. The HDLCD is an + RGB streamer that reads the data from a framebuffer and sends it to a single + digital encoder (DVI or HDMI). + +properties: + compatible: + const: arm,hdlcd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + const: pxlclk + + clocks: + maxItems: 1 + description: The input reference for the pixel clock. + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + iommus: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: + Output endpoint of the controller, connecting the LCD panel signals. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - port + +examples: + - | + hdlcd@2b000000 { + compatible = "arm,hdlcd"; + reg = <0x2b000000 0x1000>; + interrupts = <0 85 4>; + clocks = <&oscclk5>; + clock-names = "pxlclk"; + port { + hdlcd_output: endpoint { + remote-endpoint = <&hdmi_enc_input>; + }; + }; + }; + + /* HDMI encoder on I2C bus */ + i2c { + #address-cells = <1>; + #size-cells = <0>; + hdmi-transmitter@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + port { + hdmi_enc_input: endpoint { + remote-endpoint = <&hdlcd_output>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/arm,komeda.txt b/dts/Bindings/display/arm,komeda.txt deleted file mode 100644 index 8513695ee4..0000000000 --- a/dts/Bindings/display/arm,komeda.txt +++ /dev/null @@ -1,78 +0,0 @@ -Device Tree bindings for Arm Komeda display driver - -Required properties: -- compatible: Should be "arm,mali-d71" -- reg: Physical base address and length of the registers in the system -- interrupts: the interrupt line number of the device in the system -- clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' -- clock-names: A list of clock names. It should contain: - - "aclk": for the main processor clock -- #address-cells: Must be 1 -- #size-cells: Must be 0 -- iommus: configure the stream id to IOMMU, Must be configured if want to - enable iommu in display. for how to configure this node please reference - devicetree/bindings/iommu/arm,smmu-v3.txt, - devicetree/bindings/iommu/iommu.txt - -Required properties for sub-node: pipeline@nq -Each device contains one or two pipeline sub-nodes (at least one), each -pipeline node should provide properties: -- reg: Zero-indexed identifier for the pipeline -- clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' -- clock-names: should contain: - - "pxclk": pixel clock - -- port: each pipeline connect to an encoder input port. The connection is - modeled using the OF graph bindings specified in - Documentation/devicetree/bindings/graph.txt - -Optional properties: - - memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer may - be located anywhere in memory. - -Example: -/ { - ... - - dp0: display@c00000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "arm,mali-d71"; - reg = <0xc00000 0x20000>; - interrupts = <0 168 4>; - clocks = <&dpu_aclk>; - clock-names = "aclk"; - iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>, - <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>, - <&smmu 8>, <&smmu 9>; - - dp0_pipe0: pipeline@0 { - clocks = <&fpgaosc2>; - clock-names = "pxclk"; - reg = <0>; - - port { - dp0_pipe0_out: endpoint { - remote-endpoint = <&db_dvi0_in>; - }; - }; - }; - - dp0_pipe1: pipeline@1 { - clocks = <&fpgaosc2>; - clock-names = "pxclk"; - reg = <1>; - - port { - dp0_pipe1_out: endpoint { - remote-endpoint = <&db_dvi1_in>; - }; - }; - }; - }; - ... -}; diff --git a/dts/Bindings/display/arm,komeda.yaml b/dts/Bindings/display/arm,komeda.yaml new file mode 100644 index 0000000000..9f4aade97f --- /dev/null +++ b/dts/Bindings/display/arm,komeda.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,komeda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Komeda display processor + +maintainers: + - Liviu Dudau + - Andre Przywara + +description: + The Arm Mali D71 display processor supports up to two displays with up + to a 4K resolution each. Each pipeline can be composed of up to four + layers. It is typically connected to a digital display connector like HDMI. + +properties: + compatible: + oneOf: + - items: + - const: arm,mali-d32 + - const: arm,mali-d71 + - const: arm,mali-d71 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + const: aclk + + clocks: + maxItems: 1 + description: The main DPU processor clock + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + iommus: + description: + The stream IDs for each of the used pipelines, each four IDs for the + four layers, plus one for the write-back stream. + minItems: 5 + maxItems: 10 + +patternProperties: + '^pipeline@[01]$': + type: object + description: + clocks + + properties: + reg: + enum: [ 0, 1 ] + + clock-names: + const: pxclk + + clocks: + maxItems: 1 + description: The input reference for the pixel clock. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + +additionalProperties: false + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - interrupts + - clock-names + - clocks + - pipeline@0 + +examples: + - | + display@c00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,mali-d71"; + reg = <0xc00000 0x20000>; + interrupts = <168>; + clocks = <&dpu_aclk>; + clock-names = "aclk"; + iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>, + <&smmu 8>, + <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>, + <&smmu 9>; + + dp0_pipe0: pipeline@0 { + clocks = <&fpgaosc2>; + clock-names = "pxclk"; + reg = <0>; + + port { + dp0_pipe0_out: endpoint { + remote-endpoint = <&db_dvi0_in>; + }; + }; + }; + + dp0_pipe1: pipeline@1 { + clocks = <&fpgaosc2>; + clock-names = "pxclk"; + reg = <1>; + + port { + dp0_pipe1_out: endpoint { + remote-endpoint = <&db_dvi1_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/arm,malidp.txt b/dts/Bindings/display/arm,malidp.txt deleted file mode 100644 index 7a97a2b48c..0000000000 --- a/dts/Bindings/display/arm,malidp.txt +++ /dev/null @@ -1,68 +0,0 @@ -ARM Mali-DP - -The following bindings apply to a family of Display Processors sold as -licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and -DP650 processors that offer multiple composition layers, support for -rotation and scaling output. - -Required properties: - - compatible: should be one of - "arm,mali-dp500" - "arm,mali-dp550" - "arm,mali-dp650" - depending on the particular implementation present in the hardware - - reg: Physical base address and size of the block of registers used by - the processor. - - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt, - interrupt client nodes. - - interrupt-names: name of the engine inside the processor that will - use the corresponding interrupt. Should be one of "DE" or "SE". - - clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' - - clock-names: A list of clock names. It should contain: - - "pclk": for the APB interface clock - - "aclk": for the AXI interface clock - - "mclk": for the main processor clock - - "pxlclk": for the pixel clock feeding the output PLL of the processor. - - arm,malidp-output-port-lines: Array of u8 values describing the number - of output lines per channel (R, G and B). - -Required sub-nodes: - - port: The Mali DP connection to an encoder input port. The connection - is modelled using the OF graph bindings specified in - Documentation/devicetree/bindings/graph.txt - -Optional properties: - - memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer may - be located anywhere in memory. - - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS - levels of DP500's QoS signaling. - - -Example: - -/ { - ... - - dp0: malidp@6f200000 { - compatible = "arm,mali-dp650"; - reg = <0 0x6f200000 0 0x20000>; - memory-region = <&display_reserved>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 168 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "DE", "SE"; - clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; - clock-names = "pxlclk", "mclk", "aclk", "pclk"; - arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; - arm,malidp-arqos-high-level = <0xd000d000>; - port { - dp0_output: endpoint { - remote-endpoint = <&tda998x_2_input>; - }; - }; - }; - - ... -}; diff --git a/dts/Bindings/display/arm,malidp.yaml b/dts/Bindings/display/arm,malidp.yaml new file mode 100644 index 0000000000..795a08ac9f --- /dev/null +++ b/dts/Bindings/display/arm,malidp.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,malidp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Mali Display Processor (Mali-DP) binding + +maintainers: + - Liviu Dudau + - Andre Przywara + +description: + The following bindings apply to a family of Display Processors sold as + licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and + DP650 processors that offer multiple composition layers, support for + rotation and scaling output. + +properties: + compatible: + enum: + - arm,mali-dp500 + - arm,mali-dp550 + - arm,mali-dp650 + + reg: + maxItems: 1 + + interrupts: + items: + - description: + The interrupt used by the Display Engine (DE). Can be shared with + the interrupt for the Scaling Engine (SE), but it will have to be + listed individually. + - description: + The interrupt used by the Scaling Engine (SE). Can be shared with + the interrupt for the Display Engine (DE), but it will have to be + listed individually. + + interrupt-names: + items: + - const: DE + - const: SE + + clock-names: + items: + - const: pxlclk + - const: mclk + - const: aclk + - const: pclk + + clocks: + items: + - description: the pixel clock feeding the output PLL of the processor + - description: the main processor clock + - description: the AXI interface clock + - description: the APB interface clock + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + arm,malidp-output-port-lines: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Number of output lines/bits for each colour channel. + items: + - description: number of output lines for the red channel (R) + - description: number of output lines for the green channel (G) + - description: number of output lines for the blue channel (B) + + arm,malidp-arqos-high-level: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + integer describing the ARQoS levels of DP500's QoS signaling + + arm,malidp-arqos-value: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Quality-of-Service value for the display engine FIFOs, to write + into the RQOS register of the DP500. + See the ARM Mali-DP500 TRM for details on the encoding. + If omitted, the RQOS register will not be changed. + + port: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: + Output endpoint of the controller, connecting the LCD panel signals. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - port + - arm,malidp-output-port-lines + +examples: + - | + dp0: malidp@6f200000 { + compatible = "arm,mali-dp650"; + reg = <0x6f200000 0x20000>; + memory-region = <&display_reserved>; + interrupts = <168>, <168>; + interrupt-names = "DE", "SE"; + clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; + clock-names = "pxlclk", "mclk", "aclk", "pclk"; + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + arm,malidp-arqos-high-level = <0xd000d000>; + + port { + dp0_output: endpoint { + remote-endpoint = <&tda998x_2_input>; + }; + }; + }; +... diff --git a/dts/Bindings/display/arm,pl11x.txt b/dts/Bindings/display/arm,pl11x.txt deleted file mode 100644 index 3f977e72a2..0000000000 --- a/dts/Bindings/display/arm,pl11x.txt +++ /dev/null @@ -1,110 +0,0 @@ -* ARM PrimeCell Color LCD Controller PL110/PL111 - -See also Documentation/devicetree/bindings/arm/primecell.yaml - -Required properties: - -- compatible: must be one of: - "arm,pl110", "arm,primecell" - "arm,pl111", "arm,primecell" - -- reg: base address and size of the control registers block - -- interrupt-names: either the single entry "combined" representing a - combined interrupt output (CLCDINTR), or the four entries - "mbe", "vcomp", "lnbu", "fuf" representing the individual - CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts - -- interrupts: contains an interrupt specifier for each entry in - interrupt-names - -- clock-names: should contain "clcdclk" and "apb_pclk" - -- clocks: contains phandle and clock specifier pairs for the entries - in the clock-names property. See - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Optional properties: - -- memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer - may be located anywhere in the memory - -- max-memory-bandwidth: maximum bandwidth in bytes per second that the - cell's memory interface can handle; if not present, the memory - interface is fast enough to handle all possible video modes - -Required sub-nodes: - -- port: describes LCD panel signals, following the common binding - for video transmitter interfaces; see - Documentation/devicetree/bindings/media/video-interfaces.txt - -Deprecated properties: - The port's endbpoint subnode had this, now deprecated property - in the past. Drivers should be able to survive without it: - - - arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values, - defining the way CLD pads are wired up; first value - contains index of the "CLD" external pin (pad) used - as R0 (first bit of the red component), second value - index of the pad used as G0, third value index of the - pad used as B0, see also "LCD panel signal multiplexing - details" paragraphs in the PL110/PL111 Technical - Reference Manuals; this implicitly defines available - color modes, for example: - - PL111 TFT 4:4:4 panel: - arm,pl11x,tft-r0g0b0-pads = <4 15 20>; - - PL110 TFT (1:)5:5:5 panel: - arm,pl11x,tft-r0g0b0-pads = <1 7 13>; - - PL111 TFT (1:)5:5:5 panel: - arm,pl11x,tft-r0g0b0-pads = <3 11 19>; - - PL111 TFT 5:6:5 panel: - arm,pl11x,tft-r0g0b0-pads = <3 10 19>; - - PL110 and PL111 TFT 8:8:8 panel: - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: - arm,pl11x,tft-r0g0b0-pads = <16 8 0>; - - -Example: - - clcd@10020000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x10020000 0x1000>; - interrupt-names = "combined"; - interrupts = <0 44 4>; - clocks = <&oscclk1>, <&oscclk2>; - clock-names = "clcdclk", "apb_pclk"; - max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */ - - port { - clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; - }; - }; - - }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <40>; - hfront-porch = <24>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <2>; - }; - }; diff --git a/dts/Bindings/display/arm,pl11x.yaml b/dts/Bindings/display/arm,pl11x.yaml new file mode 100644 index 0000000000..b545c6d203 --- /dev/null +++ b/dts/Bindings/display/arm,pl11x.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,pl11x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm PrimeCell Color LCD Controller PL110/PL111 + +maintainers: + - Liviu Dudau + - Andre Przywara + +description: + The Arm Primcell PL010/PL111 is an LCD controller IP, than scans out + a framebuffer region in system memory, and creates timed signals for + a variety of LCD panels. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,pl110 + - arm,pl111 + required: + - compatible + +properties: + compatible: + items: + - enum: + - arm,pl110 + - arm,pl111 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupt-names: + oneOf: + - const: combined + description: + The IP provides four individual interrupt lines, but also one + combined line. If the integration only connects this line to the + interrupt controller, this single interrupt is noted here. + - items: + - const: mbe # CLCDMBEINTR + - const: vcomp # CLCDVCOMPINTR + - const: lnbu # CLCDLNBUINTR + - const: fuf # CLCDFUFINTR + + interrupts: + minItems: 1 + maxItems: 4 + + clock-names: + items: + - const: clcdclk + - const: apb_pclk + + clocks: + items: + - description: The CLCDCLK reference clock for the controller. + - description: The HCLK AHB slave clock for the register access. + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum bandwidth in bytes per second that the cell's memory interface + can handle. + If not present, the memory interface is fast enough to handle all + possible video modes. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + description: + Output endpoint of the controller, connecting the LCD panel signals. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + arm,pl11x,tft-r0g0b0-pads: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: index of CLD pad used for first red bit (R0) + - description: index of CLD pad used for first green bit (G0) + - description: index of CLD pad used for first blue bit (G0) + deprecated: true + description: | + DEPRECATED. An array of three 32-bit values, defining the way + CLD[23:0] pads are wired up. + The first value contains the index of the "CLD" external pin (pad) + used as R0 (first bit of the red component), the second value for + green, the third value for blue. + See also "LCD panel signal multiplexing details" paragraphs in the + PL110/PL111 Technical Reference Manuals. + This implicitly defines available color modes, for example: + - PL111 TFT 4:4:4 panel: + arm,pl11x,tft-r0g0b0-pads = <4 15 20>; + - PL110 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <1 7 13>; + - PL111 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 11 19>; + - PL111 TFT 5:6:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 10 19>; + - PL110 and PL111 TFT 8:8:8 panel: + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: + arm,pl11x,tft-r0g0b0-pads = <16 8 0>; + +additionalProperties: false + +required: + - compatible + - reg + - clock-names + - clocks + - port + +allOf: + - if: + properties: + interrupts: + minItems: 2 + required: + - interrupts + then: + required: + - interrupt-names + +examples: + - | + clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupt-names = "combined"; + interrupts = <44>; + clocks = <&oscclk1>, <&oscclk2>; + clock-names = "clcdclk", "apb_pclk"; + max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */ + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + }; + }; + }; + + panel { + compatible = "arm,rtsm-display", "panel-dpi"; + power-supply = <&vcc_supply>; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; + }; +... diff --git a/dts/Bindings/display/bridge/chipone,icn6211.yaml b/dts/Bindings/display/bridge/chipone,icn6211.yaml index 7257fd0ae4..4f0b7c7131 100644 --- a/dts/Bindings/display/bridge/chipone,icn6211.yaml +++ b/dts/Bindings/display/bridge/chipone,icn6211.yaml @@ -41,10 +41,26 @@ properties: properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Video port for MIPI DSI input + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + port@1: $ref: /schemas/graph.yaml#/properties/port description: diff --git a/dts/Bindings/display/bridge/fsl,ldb.yaml b/dts/Bindings/display/bridge/fsl,ldb.yaml new file mode 100644 index 0000000000..77f174eee4 --- /dev/null +++ b/dts/Bindings/display/bridge/fsl,ldb.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP DPI to LVDS bridge chip + +maintainers: + - Marek Vasut + +description: | + The i.MX8MP mediamix contains two registers which are responsible + for configuring the on-SoC DPI-to-LVDS serializer. This describes + those registers as bridge within the DT. + +properties: + compatible: + const: fsl,imx8mp-ldb + + clocks: + maxItems: 1 + + clock-names: + const: ldb + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DPI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-A output (panel or bridge). + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-B output (panel or bridge). + + required: + - port@0 + - port@1 + +required: + - compatible + - clocks + - ports + +additionalProperties: false + +examples: + - | + #include + + blk-ctrl { + bridge { + compatible = "fsl,imx8mp-ldb"; + clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + clock-names = "ldb"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ldb_from_lcdif2: endpoint { + remote-endpoint = <&lcdif2_to_ldb>; + }; + }; + + port@1 { + reg = <1>; + + ldb_lvds_ch0: endpoint { + remote-endpoint = <&ldb_to_lvdsx4panel>; + }; + }; + + port@2 { + reg = <2>; + + ldb_lvds_ch1: endpoint { + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/google,cros-ec-anx7688.yaml b/dts/Bindings/display/bridge/google,cros-ec-anx7688.yaml index a88a5d8c7b..a44d025d33 100644 --- a/dts/Bindings/display/bridge/google,cros-ec-anx7688.yaml +++ b/dts/Bindings/display/bridge/google,cros-ec-anx7688.yaml @@ -78,4 +78,3 @@ examples: }; }; }; - diff --git a/dts/Bindings/display/bridge/ite,it66121.yaml b/dts/Bindings/display/bridge/ite,it66121.yaml index 6ec1d5fbb8..c6e81f5322 100644 --- a/dts/Bindings/display/bridge/ite,it66121.yaml +++ b/dts/Bindings/display/bridge/ite,it66121.yaml @@ -38,6 +38,9 @@ properties: interrupts: maxItems: 1 + "#sound-dai-cells": + const: 0 + ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/dts/Bindings/display/bridge/lontium,lt9211.yaml b/dts/Bindings/display/bridge/lontium,lt9211.yaml new file mode 100644 index 0000000000..9a6e9b25d1 --- /dev/null +++ b/dts/Bindings/display/bridge/lontium,lt9211.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge. + +maintainers: + - Marek Vasut + +description: | + The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS + or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI. + +properties: + compatible: + enum: + - lontium,lt9211 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + vccio-supply: + description: Regulator for 1.8V IO power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI DSI port-1 for MIPI input or + LVDS port-1 for LVDS input or DPI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI input or LVDS port-2 + for LVDS input. Used in combination with primary + port-1 to drive higher resolution displays + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI DSI port-1 for MIPI output or + LVDS port-1 for LVDS output or DPI output. + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI output or LVDS port-2 + for LVDS output. Used in combination with primary + port-1 to drive higher resolution displays. + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - vccio-supply + - ports + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@3b { + compatible = "lontium,lt9211"; + reg = <0x3b>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <<9211_1v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/ps8640.yaml b/dts/Bindings/display/bridge/ps8640.yaml index 186e17be51..8ab156e0a8 100644 --- a/dts/Bindings/display/bridge/ps8640.yaml +++ b/dts/Bindings/display/bridge/ps8640.yaml @@ -119,4 +119,3 @@ examples: }; }; }; - diff --git a/dts/Bindings/display/bridge/toshiba,tc358767.yaml b/dts/Bindings/display/bridge/toshiba,tc358767.yaml index f1541cc052..ed280053ec 100644 --- a/dts/Bindings/display/bridge/toshiba,tc358767.yaml +++ b/dts/Bindings/display/bridge/toshiba,tc358767.yaml @@ -53,16 +53,32 @@ properties: properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: | DSI input port. The remote endpoint phandle should be a reference to a valid DSI output endpoint node + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + port@1: $ref: /schemas/graph.yaml#/properties/port description: | - DPI input port. The remote endpoint phandle should be a - reference to a valid DPI output endpoint node + DPI input/output port. The remote endpoint phandle should be a + reference to a valid DPI output or input endpoint node. port@2: $ref: /schemas/graph.yaml#/properties/port diff --git a/dts/Bindings/display/bridge/toshiba,tc358768.yaml b/dts/Bindings/display/bridge/toshiba,tc358768.yaml index 3bd670b8e5..0b6f5bef12 100644 --- a/dts/Bindings/display/bridge/toshiba,tc358768.yaml +++ b/dts/Bindings/display/bridge/toshiba,tc358768.yaml @@ -58,6 +58,7 @@ properties: properties: data-lines: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 16, 18, 24 ] port@1: diff --git a/dts/Bindings/display/imx/nxp,imx8mq-dcss.yaml b/dts/Bindings/display/imx/nxp,imx8mq-dcss.yaml index 0091df9dd7..989ab312c1 100644 --- a/dts/Bindings/display/imx/nxp,imx8mq-dcss.yaml +++ b/dts/Bindings/display/imx/nxp,imx8mq-dcss.yaml @@ -105,4 +105,3 @@ examples: }; }; }; - diff --git a/dts/Bindings/display/mediatek/mediatek,aal.yaml b/dts/Bindings/display/mediatek/mediatek,aal.yaml index 61f0ed1e38..d4d585485e 100644 --- a/dts/Bindings/display/mediatek/mediatek,aal.yaml +++ b/dts/Bindings/display/mediatek/mediatek,aal.yaml @@ -21,16 +21,19 @@ description: | properties: compatible: oneOf: + - enum: + - mediatek,mt8173-disp-aal + - mediatek,mt8183-disp-aal - items: + - enum: + - mediatek,mt2712-disp-aal - const: mediatek,mt8173-disp-aal - items: - enum: - - mediatek,mt2712-disp-aal - - mediatek,mt8183-disp-aal + - mediatek,mt8186-disp-aal - mediatek,mt8192-disp-aal - mediatek,mt8195-disp-aal - - enum: - - mediatek,mt8173-disp-aal + - const: mediatek,mt8183-disp-aal reg: maxItems: 1 diff --git a/dts/Bindings/display/mediatek/mediatek,ccorr.yaml b/dts/Bindings/display/mediatek/mediatek,ccorr.yaml index 0ed53b6238..63fb02014a 100644 --- a/dts/Bindings/display/mediatek/mediatek,ccorr.yaml +++ b/dts/Bindings/display/mediatek/mediatek,ccorr.yaml @@ -28,8 +28,11 @@ properties: - items: - enum: - mediatek,mt8195-disp-ccorr + - const: mediatek,mt8192-disp-ccorr + - items: - enum: - - mediatek,mt8192-disp-ccorr + - mediatek,mt8186-disp-ccorr + - const: mediatek,mt8183-disp-ccorr reg: maxItems: 1 diff --git a/dts/Bindings/display/mediatek/mediatek,color.yaml b/dts/Bindings/display/mediatek/mediatek,color.yaml index 3ad842eb56..d2f89ee799 100644 --- a/dts/Bindings/display/mediatek/mediatek,color.yaml +++ b/dts/Bindings/display/mediatek/mediatek,color.yaml @@ -32,15 +32,14 @@ properties: - enum: - mediatek,mt7623-disp-color - mediatek,mt2712-disp-color - - enum: - - mediatek,mt2701-disp-color + - const: mediatek,mt2701-disp-color - items: - enum: - mediatek,mt8183-disp-color + - mediatek,mt8186-disp-color - mediatek,mt8192-disp-color - mediatek,mt8195-disp-color - - enum: - - mediatek,mt8173-disp-color + - const: mediatek,mt8173-disp-color reg: maxItems: 1 diff --git a/dts/Bindings/display/mediatek/mediatek,dither.yaml b/dts/Bindings/display/mediatek/mediatek,dither.yaml index 6657549af1..8ad8187c02 100644 --- a/dts/Bindings/display/mediatek/mediatek,dither.yaml +++ b/dts/Bindings/display/mediatek/mediatek,dither.yaml @@ -26,10 +26,10 @@ properties: - const: mediatek,mt8183-disp-dither - items: - enum: + - mediatek,mt8186-disp-dither - mediatek,mt8192-disp-dither - mediatek,mt8195-disp-dither - - enum: - - mediatek,mt8183-disp-dither + - const: mediatek,mt8183-disp-dither reg: maxItems: 1 diff --git a/dts/Bindings/display/mediatek/mediatek,dpi.yaml b/dts/Bindings/display/mediatek/mediatek,dpi.yaml index 843f89d605..77ee1b9239 100644 --- a/dts/Bindings/display/mediatek/mediatek,dpi.yaml +++ b/dts/Bindings/display/mediatek/mediatek,dpi.yaml @@ -22,6 +22,7 @@ properties: - mediatek,mt7623-dpi - mediatek,mt8173-dpi - mediatek,mt8183-dpi + - mediatek,mt8186-dpi - mediatek,mt8192-dpi reg: diff --git a/dts/Bindings/display/mediatek/mediatek,gamma.yaml b/dts/Bindings/display/mediatek/mediatek,gamma.yaml index 7844233931..a89ea0ea75 100644 --- a/dts/Bindings/display/mediatek/mediatek,gamma.yaml +++ b/dts/Bindings/display/mediatek/mediatek,gamma.yaml @@ -27,10 +27,10 @@ properties: - const: mediatek,mt8183-disp-gamma - items: - enum: + - mediatek,mt8186-disp-gamma - mediatek,mt8192-disp-gamma - mediatek,mt8195-disp-gamma - - enum: - - mediatek,mt8183-disp-gamma + - const: mediatek,mt8183-disp-gamma reg: maxItems: 1 diff --git a/dts/Bindings/display/mediatek/mediatek,merge.yaml b/dts/Bindings/display/mediatek/mediatek,merge.yaml index d635c5dcb6..69ba75777d 100644 --- a/dts/Bindings/display/mediatek/mediatek,merge.yaml +++ b/dts/Bindings/display/mediatek/mediatek,merge.yaml @@ -102,4 +102,3 @@ examples: clock-names = "merge"; }; }; - diff --git a/dts/Bindings/display/mediatek/mediatek,mutex.yaml b/dts/Bindings/display/mediatek/mediatek,mutex.yaml index 00e6a1041a..3fdad71210 100644 --- a/dts/Bindings/display/mediatek/mediatek,mutex.yaml +++ b/dts/Bindings/display/mediatek/mediatek,mutex.yaml @@ -23,21 +23,16 @@ description: | properties: compatible: - oneOf: - - items: - - const: mediatek,mt2701-disp-mutex - - items: - - const: mediatek,mt2712-disp-mutex - - items: - - const: mediatek,mt8167-disp-mutex - - items: - - const: mediatek,mt8173-disp-mutex - - items: - - const: mediatek,mt8183-disp-mutex - - items: - - const: mediatek,mt8192-disp-mutex - - items: - - const: mediatek,mt8195-disp-mutex + enum: + - mediatek,mt2701-disp-mutex + - mediatek,mt2712-disp-mutex + - mediatek,mt8167-disp-mutex + - mediatek,mt8173-disp-mutex + - mediatek,mt8183-disp-mutex + - mediatek,mt8186-disp-mutex + - mediatek,mt8192-disp-mutex + - mediatek,mt8195-disp-mutex + reg: maxItems: 1 diff --git a/dts/Bindings/display/mediatek/mediatek,ovl-2l.yaml b/dts/Bindings/display/mediatek/mediatek,ovl-2l.yaml index da999ba53b..4e94f4e947 100644 --- a/dts/Bindings/display/mediatek/mediatek,ovl-2l.yaml +++ b/dts/Bindings/display/mediatek/mediatek,ovl-2l.yaml @@ -25,6 +25,10 @@ properties: - const: mediatek,mt8183-disp-ovl-2l - items: - const: mediatek,mt8192-disp-ovl-2l + - items: + - enum: + - mediatek,mt8186-disp-ovl-2l + - const: mediatek,mt8192-disp-ovl-2l reg: maxItems: 1 diff --git a/dts/Bindings/display/mediatek/mediatek,ovl.yaml b/dts/Bindings/display/mediatek/mediatek,ovl.yaml index f77094e614..a2a27d0ca0 100644 --- a/dts/Bindings/display/mediatek/mediatek,ovl.yaml +++ b/dts/Bindings/display/mediatek/mediatek,ovl.yaml @@ -33,13 +33,15 @@ properties: - enum: - mediatek,mt7623-disp-ovl - mediatek,mt2712-disp-ovl - - enum: - - mediatek,mt2701-disp-ovl + - const: mediatek,mt2701-disp-ovl - items: - enum: - mediatek,mt8195-disp-ovl + - const: mediatek,mt8183-disp-ovl + - items: - enum: - - mediatek,mt8183-disp-ovl + - mediatek,mt8186-disp-ovl + - const: mediatek,mt8192-disp-ovl reg: maxItems: 1 diff --git a/dts/Bindings/display/mediatek/mediatek,postmask.yaml b/dts/Bindings/display/mediatek/mediatek,postmask.yaml index 2d769422e2..654080bfbd 100644 --- a/dts/Bindings/display/mediatek/mediatek,postmask.yaml +++ b/dts/Bindings/display/mediatek/mediatek,postmask.yaml @@ -23,6 +23,10 @@ properties: oneOf: - items: - const: mediatek,mt8192-disp-postmask + - items: + - enum: + - mediatek,mt8186-disp-postmask + - const: mediatek,mt8192-disp-postmask reg: maxItems: 1 diff --git a/dts/Bindings/display/mediatek/mediatek,rdma.yaml b/dts/Bindings/display/mediatek/mediatek,rdma.yaml index e8c72afa06..0882ae86e6 100644 --- a/dts/Bindings/display/mediatek/mediatek,rdma.yaml +++ b/dts/Bindings/display/mediatek/mediatek,rdma.yaml @@ -35,13 +35,12 @@ properties: - enum: - mediatek,mt7623-disp-rdma - mediatek,mt2712-disp-rdma - - enum: - - mediatek,mt2701-disp-rdma + - const: mediatek,mt2701-disp-rdma - items: - enum: + - mediatek,mt8186-disp-rdma - mediatek,mt8192-disp-rdma - - enum: - - mediatek,mt8183-disp-rdma + - const: mediatek,mt8183-disp-rdma reg: maxItems: 1 diff --git a/dts/Bindings/display/msm/dpu-qcm2290.yaml b/dts/Bindings/display/msm/dpu-qcm2290.yaml index 6fb7e321f0..734d14de96 100644 --- a/dts/Bindings/display/msm/dpu-qcm2290.yaml +++ b/dts/Bindings/display/msm/dpu-qcm2290.yaml @@ -66,6 +66,10 @@ properties: interconnect-names: const: mdp0-mem + resets: + items: + - description: MDSS_CORE reset + patternProperties: "^display-controller@[0-9a-f]+$": type: object diff --git a/dts/Bindings/display/msm/dpu-sc7180.yaml b/dts/Bindings/display/msm/dpu-sc7180.yaml index 12a86b1ec1..b41991eaa4 100644 --- a/dts/Bindings/display/msm/dpu-sc7180.yaml +++ b/dts/Bindings/display/msm/dpu-sc7180.yaml @@ -65,6 +65,10 @@ properties: interconnect-names: const: mdp0-mem + resets: + items: + - description: MDSS_CORE reset + patternProperties: "^display-controller@[0-9a-f]+$": type: object diff --git a/dts/Bindings/display/msm/dpu-sc7280.yaml b/dts/Bindings/display/msm/dpu-sc7280.yaml index fbeb931a02..6e417d06fc 100644 --- a/dts/Bindings/display/msm/dpu-sc7280.yaml +++ b/dts/Bindings/display/msm/dpu-sc7280.yaml @@ -64,6 +64,10 @@ properties: interconnect-names: const: mdp0-mem + resets: + items: + - description: MDSS_CORE reset + patternProperties: "^display-controller@[0-9a-f]+$": type: object diff --git a/dts/Bindings/display/msm/dpu-sdm845.yaml b/dts/Bindings/display/msm/dpu-sdm845.yaml index 0dca4b3d66..1a42491efd 100644 --- a/dts/Bindings/display/msm/dpu-sdm845.yaml +++ b/dts/Bindings/display/msm/dpu-sdm845.yaml @@ -57,6 +57,10 @@ properties: ranges: true + resets: + items: + - description: MDSS_CORE reset + patternProperties: "^display-controller@[0-9a-f]+$": type: object diff --git a/dts/Bindings/display/panel/ilitek,ili9341.yaml b/dts/Bindings/display/panel/ilitek,ili9341.yaml index 20ce88ab4b..6058948a97 100644 --- a/dts/Bindings/display/panel/ilitek,ili9341.yaml +++ b/dts/Bindings/display/panel/ilitek,ili9341.yaml @@ -75,4 +75,3 @@ examples: }; }; ... - diff --git a/dts/Bindings/display/panel/leadtek,ltk035c5444t.yaml b/dts/Bindings/display/panel/leadtek,ltk035c5444t.yaml new file mode 100644 index 0000000000..817a9bed7d --- /dev/null +++ b/dts/Bindings/display/panel/leadtek,ltk035c5444t.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel + +maintainers: + - Paul Cercueil + - Christophe Branchereau + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: leadtek,ltk035c5444t + + backlight: true + port: true + power-supply: true + reg: true + reset-gpios: true + +required: + - compatible + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include + + spi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "leadtek,ltk035c5444t"; + reg = <0>; + + spi-3wire; + spi-max-frequency = <3125000>; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/orisetech,otm8009a.yaml b/dts/Bindings/display/panel/orisetech,otm8009a.yaml index 17cbd0ad32..ad7d357519 100644 --- a/dts/Bindings/display/panel/orisetech,otm8009a.yaml +++ b/dts/Bindings/display/panel/orisetech,otm8009a.yaml @@ -50,4 +50,3 @@ examples: }; }; ... - diff --git a/dts/Bindings/display/panel/panel-simple.yaml b/dts/Bindings/display/panel/panel-simple.yaml index 1eb9dd4f8f..21ba90c9fe 100644 --- a/dts/Bindings/display/panel/panel-simple.yaml +++ b/dts/Bindings/display/panel/panel-simple.yaml @@ -105,6 +105,8 @@ properties: - chunghwa,claa101wb01 # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel - chunghwa,claa101wb03 + # DataImage, Inc. 4.3" WQVGA (480x272) TFT LCD panel with 24-bit parallel interface. + - dataimage,fg040346dsswbg04 # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface. - dataimage,scf0700c48ggu18 # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel @@ -294,6 +296,8 @@ properties: - starry,kr070pe2t # Starry 12.2" (1920x1200 pixels) TFT LCD panel - starry,kr122ea0sra + # Startek KD070WVFPA043-C069A 7" TFT LCD panel + - startek,kd070wvfpa # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel - team-source-display,tst043015cmhx # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel diff --git a/dts/Bindings/display/panel/panel-timing.yaml b/dts/Bindings/display/panel/panel-timing.yaml index 7749de95ee..229e3b36ee 100644 --- a/dts/Bindings/display/panel/panel-timing.yaml +++ b/dts/Bindings/display/panel/panel-timing.yaml @@ -146,6 +146,7 @@ properties: Horizontal sync pulse. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] vsync-active: @@ -153,6 +154,7 @@ properties: Vertical sync pulse. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] de-active: @@ -160,6 +162,7 @@ properties: Data enable. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] pixelclk-active: @@ -169,6 +172,7 @@ properties: sample data on rising edge. Use 1 to drive pixel data on rising edge and sample data on falling edge + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] syncclk-active: @@ -179,6 +183,7 @@ properties: sample sync on rising edge of pixel clock. Use 1 to drive sync on rising edge and sample sync on falling edge of pixel clock + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] interlaced: diff --git a/dts/Bindings/display/panel/raydium,rm67191.yaml b/dts/Bindings/display/panel/raydium,rm67191.yaml index 745dd247c4..617aa8c8c0 100644 --- a/dts/Bindings/display/panel/raydium,rm67191.yaml +++ b/dts/Bindings/display/panel/raydium,rm67191.yaml @@ -24,6 +24,7 @@ properties: dsi-lanes: description: Number of DSI lanes to be used must be <3> or <4> + $ref: /schemas/types.yaml#/definitions/uint32 enum: [3, 4] v3p3-supply: diff --git a/dts/Bindings/display/panel/samsung,s6e8aa0.yaml b/dts/Bindings/display/panel/samsung,s6e8aa0.yaml index ca95945155..1cdc91b343 100644 --- a/dts/Bindings/display/panel/samsung,s6e8aa0.yaml +++ b/dts/Bindings/display/panel/samsung,s6e8aa0.yaml @@ -36,6 +36,7 @@ properties: init-delay: description: delay after initialization sequence [ms] + $ref: /schemas/types.yaml#/definitions/uint32 panel-width-mm: description: physical panel width [mm] diff --git a/dts/Bindings/display/rockchip/rockchip,dw-hdmi.yaml b/dts/Bindings/display/rockchip/rockchip,dw-hdmi.yaml index da3b889ad8..7e59dee15a 100644 --- a/dts/Bindings/display/rockchip/rockchip,dw-hdmi.yaml +++ b/dts/Bindings/display/rockchip/rockchip,dw-hdmi.yaml @@ -23,10 +23,22 @@ properties: - rockchip,rk3288-dw-hdmi - rockchip,rk3328-dw-hdmi - rockchip,rk3399-dw-hdmi + - rockchip,rk3568-dw-hdmi reg-io-width: const: 4 + avdd-0v9-supply: + description: + A 0.9V supply that powers up the SoC internal circuitry. The actual pin name + varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes + HDMI_AVDD_1V0. + + avdd-1v8-supply: + description: + A 1.8V supply that powers up the SoC internal circuitry. The pin name on the + SoC usually is HDMI_TX_AVDD_1V8. + clocks: minItems: 2 items: @@ -36,7 +48,8 @@ properties: # order when present. - description: The HDMI CEC controller main clock - description: Power for GRF IO - - description: External clock for some HDMI PHY + - description: External clock for some HDMI PHY (old clock name, deprecated) + - description: External clock for some HDMI PHY (new name) clock-names: minItems: 2 @@ -47,10 +60,14 @@ properties: - cec - grf - vpll + - ref - enum: - grf - vpll - - const: vpll + - ref + - enum: + - vpll + - ref ddc-i2c-bus: $ref: /schemas/types.yaml#/definitions/phandle @@ -72,6 +89,7 @@ properties: The unwedge pinctrl entry shall drive the DDC SDA line low. This is intended to work around a hardware errata that can cause the DDC I2C bus to be wedged. + minItems: 1 items: - const: default - const: unwedge @@ -79,27 +97,21 @@ properties: ports: $ref: /schemas/graph.yaml#/properties/ports - properties: - port: - $ref: /schemas/graph.yaml#/$defs/port-base - unevaluatedProperties: false + patternProperties: + "^port(@0)?$": + $ref: /schemas/graph.yaml#/properties/port description: Input of the DWC HDMI TX - properties: + endpoint: + description: Connection to the VOP endpoint@0: - $ref: /schemas/graph.yaml#/properties/endpoint description: Connection to the VOPB - endpoint@1: - $ref: /schemas/graph.yaml#/properties/endpoint description: Connection to the VOPL - - required: - - endpoint@0 - - endpoint@1 - - required: - - port + properties: + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output of the DWC HDMI TX rockchip,grf: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/dts/Bindings/display/rockchip/rockchip-vop2.yaml b/dts/Bindings/display/rockchip/rockchip-vop2.yaml new file mode 100644 index 0000000000..fba45091d9 --- /dev/null +++ b/dts/Bindings/display/rockchip/rockchip-vop2.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC display controller (VOP2) + +description: + VOP2 (Video Output Processor v2) is the display controller for the Rockchip + series of SoCs which transfers the image data from a video memory + buffer to an external LCD interface. + +maintainers: + - Sandy Huang + - Heiko Stuebner + +properties: + compatible: + enum: + - rockchip,rk3566-vop + - rockchip,rk3568-vop + + reg: + items: + - description: + Must contain one entry corresponding to the base address and length + of the register space. + - description: + Can optionally contain a second entry corresponding to + the CRTC gamma LUT address. + + reg-names: + items: + - const: vop + - const: gamma-lut + + interrupts: + maxItems: 1 + description: + The VOP interrupt is shared by several interrupt sources, such as + frame start (VSYNC), line flag and other status interrupts. + + clocks: + items: + - description: Clock for ddr buffer transfer. + - description: Clock for the ahb bus to R/W the phy regs. + - description: Pixel clock for video port 0. + - description: Pixel clock for video port 1. + - description: Pixel clock for video port 2. + + clock-names: + items: + - const: aclk + - const: hclk + - const: dclk_vp0 + - const: dclk_vp1 + - const: dclk_vp2 + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to GRF regs used for misc control + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of VP0 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of VP1 + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of VP2 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + #include + #include + #include + bus { + #address-cells = <2>; + #size-cells = <2>; + vop: vop@fe040000 { + compatible = "rockchip,rk3568-vop"; + reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>; + reg-names = "vop", "gamma-lut"; + interrupts = ; + clocks = <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru DCLK_VOP2>; + clock-names = "aclk", + "hclk", + "dclk_vp0", + "dclk_vp1", + "dclk_vp2"; + power-domains = <&power RK3568_PD_VO>; + iommus = <&vop_mmu>; + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + vp0: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + vp1: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + vp2: port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/sitronix,st7735r.yaml b/dts/Bindings/display/sitronix,st7735r.yaml index 0cebaaefda..157b1a7b18 100644 --- a/dts/Bindings/display/sitronix,st7735r.yaml +++ b/dts/Bindings/display/sitronix,st7735r.yaml @@ -32,15 +32,13 @@ properties: - okaya,rh128128t - const: sitronix,st7715r - spi-max-frequency: - maximum: 32000000 - dc-gpios: maxItems: 1 description: Display data/command selection (D/CX) backlight: true reg: true + spi-max-frequency: true reset-gpios: true rotation: true @@ -48,7 +46,6 @@ required: - compatible - reg - dc-gpios - - reset-gpios additionalProperties: false @@ -72,6 +69,7 @@ examples: dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; rotation = <270>; + backlight = <&backlight>; }; }; diff --git a/dts/Bindings/display/solomon,ssd1307fb.yaml b/dts/Bindings/display/solomon,ssd1307fb.yaml index 9baafd0c42..3fbd87c2c1 100644 --- a/dts/Bindings/display/solomon,ssd1307fb.yaml +++ b/dts/Bindings/display/solomon,ssd1307fb.yaml @@ -12,11 +12,22 @@ maintainers: properties: compatible: - enum: - - solomon,ssd1305fb-i2c - - solomon,ssd1306fb-i2c - - solomon,ssd1307fb-i2c - - solomon,ssd1309fb-i2c + oneOf: + # Deprecated compatible strings + - items: + - enum: + - solomon,ssd1305fb-i2c + - solomon,ssd1306fb-i2c + - solomon,ssd1307fb-i2c + - solomon,ssd1309fb-i2c + deprecated: true + - items: + - enum: + - sinowealth,sh1106 + - solomon,ssd1305 + - solomon,ssd1306 + - solomon,ssd1307 + - solomon,ssd1309 reg: maxItems: 1 @@ -27,9 +38,20 @@ properties: reset-gpios: maxItems: 1 + # Only required for SPI + dc-gpios: + description: + GPIO connected to the controller's D/C# (Data/Command) pin, + that is needed for 4-wire SPI to tell the controller if the + data sent is for a command register or the display data RAM + maxItems: 1 + vbat-supply: description: The supply for VBAT + # Only required for SPI + spi-max-frequency: true + solomon,height: $ref: /schemas/types.yaml#/definitions/uint32 default: 16 @@ -135,7 +157,21 @@ allOf: properties: compatible: contains: - const: solomon,ssd1305fb-i2c + const: sinowealth,sh1106 + then: + properties: + solomon,dclk-div: + default: 1 + solomon,dclk-frq: + default: 5 + + - if: + properties: + compatible: + contains: + enum: + - solomon,ssd1305-i2c + - solomon,ssd1305 then: properties: solomon,dclk-div: @@ -147,7 +183,9 @@ allOf: properties: compatible: contains: - const: solomon,ssd1306fb-i2c + enum: + - solomon,ssd1306-i2c + - solomon,ssd1306 then: properties: solomon,dclk-div: @@ -159,7 +197,9 @@ allOf: properties: compatible: contains: - const: solomon,ssd1307fb-i2c + enum: + - solomon,ssd1307-i2c + - solomon,ssd1307 then: properties: solomon,dclk-div: @@ -173,7 +213,9 @@ allOf: properties: compatible: contains: - const: solomon,ssd1309fb-i2c + enum: + - solomon,ssd1309-i2c + - solomon,ssd1309 then: properties: solomon,dclk-div: @@ -189,15 +231,15 @@ examples: #address-cells = <1>; #size-cells = <0>; - ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; + ssd1307_i2c: oled@3c { + compatible = "solomon,ssd1307"; reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; }; - ssd1306: oled@3d { - compatible = "solomon,ssd1306fb-i2c"; + ssd1306_i2c: oled@3d { + compatible = "solomon,ssd1306"; reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; @@ -207,3 +249,30 @@ examples: solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; }; }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ssd1307_spi: oled@0 { + compatible = "solomon,ssd1307"; + reg = <0x0>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + }; + + ssd1306_spi: oled@1 { + compatible = "solomon,ssd1306"; + reg = <0x1>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; + }; + }; diff --git a/dts/Bindings/display/sprd/sprd,display-subsystem.yaml b/dts/Bindings/display/sprd/sprd,display-subsystem.yaml index d0a5592bd8..b3d5e1b96f 100644 --- a/dts/Bindings/display/sprd/sprd,display-subsystem.yaml +++ b/dts/Bindings/display/sprd/sprd,display-subsystem.yaml @@ -63,4 +63,3 @@ examples: compatible = "sprd,display-subsystem"; ports = <&dpu_out>; }; - diff --git a/dts/Bindings/display/st,stm32-ltdc.yaml b/dts/Bindings/display/st,stm32-ltdc.yaml index 01e2da2379..d6ea4d62a2 100644 --- a/dts/Bindings/display/st,stm32-ltdc.yaml +++ b/dts/Bindings/display/st,stm32-ltdc.yaml @@ -75,4 +75,3 @@ examples: }; ... - diff --git a/dts/Bindings/dma/allwinner,sun50i-a64-dma.yaml b/dts/Bindings/dma/allwinner,sun50i-a64-dma.yaml index b6e1ebfaf3..ff0a5c58d7 100644 --- a/dts/Bindings/dma/allwinner,sun50i-a64-dma.yaml +++ b/dts/Bindings/dma/allwinner,sun50i-a64-dma.yaml @@ -20,9 +20,11 @@ properties: compatible: oneOf: - - const: allwinner,sun50i-a64-dma - - const: allwinner,sun50i-a100-dma - - const: allwinner,sun50i-h6-dma + - enum: + - allwinner,sun20i-d1-dma + - allwinner,sun50i-a64-dma + - allwinner,sun50i-a100-dma + - allwinner,sun50i-h6-dma - items: - const: allwinner,sun8i-r40-dma - const: allwinner,sun50i-a64-dma @@ -58,6 +60,7 @@ if: properties: compatible: enum: + - allwinner,sun20i-d1-dma - allwinner,sun50i-a100-dma - allwinner,sun50i-h6-dma diff --git a/dts/Bindings/dma/altr,msgdma.yaml b/dts/Bindings/dma/altr,msgdma.yaml index b193ee2db4..b53ac7631a 100644 --- a/dts/Bindings/dma/altr,msgdma.yaml +++ b/dts/Bindings/dma/altr,msgdma.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Altera mSGDMA IP core maintainers: - - Olivier Dautricourt + - Olivier Dautricourt description: | Altera / Intel modular Scatter-Gather Direct Memory Access (mSGDMA) diff --git a/dts/Bindings/dma/arm,pl330.yaml b/dts/Bindings/dma/arm,pl330.yaml index decab185cf..2bec69b308 100644 --- a/dts/Bindings/dma/arm,pl330.yaml +++ b/dts/Bindings/dma/arm,pl330.yaml @@ -55,6 +55,9 @@ properties: dma-coherent: true + power-domains: + maxItems: 1 + resets: minItems: 1 maxItems: 2 diff --git a/dts/Bindings/dma/fsl-imx-dma.txt b/dts/Bindings/dma/fsl-imx-dma.txt index 7bd8847d63..1c9929d537 100644 --- a/dts/Bindings/dma/fsl-imx-dma.txt +++ b/dts/Bindings/dma/fsl-imx-dma.txt @@ -13,8 +13,10 @@ Required properties: - #dma-cells : Has to be 1. imx-dma does not support anything else. Optional properties: -- #dma-channels : Number of DMA channels supported. Should be 16. -- #dma-requests : Number of DMA requests supported. +- dma-channels : Number of DMA channels supported. Should be 16. +- #dma-channels : deprecated +- dma-requests : Number of DMA requests supported. +- #dma-requests : deprecated Example: @@ -23,7 +25,7 @@ Example: reg = <0x10001000 0x1000>; interrupts = <32 33>; #dma-cells = <1>; - #dma-channels = <16>; + dma-channels = <16>; }; diff --git a/dts/Bindings/dma/mmp-dma.txt b/dts/Bindings/dma/mmp-dma.txt index 8f7364a7b3..ec18bf0a80 100644 --- a/dts/Bindings/dma/mmp-dma.txt +++ b/dts/Bindings/dma/mmp-dma.txt @@ -10,10 +10,12 @@ Required properties: or one irq for pdma device Optional properties: -- #dma-channels: Number of DMA channels supported by the controller (defaults +- dma-channels: Number of DMA channels supported by the controller (defaults to 32 when not specified) -- #dma-requests: Number of DMA requestor lines supported by the controller +- #dma-channels: deprecated +- dma-requests: Number of DMA requestor lines supported by the controller (defaults to 32 when not specified) +- #dma-requests: deprecated "marvell,pdma-1.0" Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688. @@ -33,7 +35,7 @@ pdma: dma-controller@d4000000 { reg = <0xd4000000 0x10000>; interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; interrupt-parent = <&intcmux32>; - #dma-channels = <16>; + dma-channels = <16>; }; /* @@ -45,7 +47,7 @@ pdma: dma-controller@d4000000 { compatible = "marvell,pdma-1.0"; reg = <0xd4000000 0x10000>; interrupts = <47>; - #dma-channels = <16>; + dma-channels = <16>; }; diff --git a/dts/Bindings/dma/nvidia,tegra186-gpc-dma.yaml b/dts/Bindings/dma/nvidia,tegra186-gpc-dma.yaml new file mode 100644 index 0000000000..9dd1476d18 --- /dev/null +++ b/dts/Bindings/dma/nvidia,tegra186-gpc-dma.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/nvidia,tegra186-gpc-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra GPC DMA Controller Device Tree Bindings + +description: | + The Tegra General Purpose Central (GPC) DMA controller is used for faster + data transfers between memory to memory, memory to device and device to + memory. + +maintainers: + - Jon Hunter + - Rajesh Gumasta + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + oneOf: + - const: nvidia,tegra186-gpcdma + - items: + - const: nvidia,tegra194-gpcdma + - const: nvidia,tegra186-gpcdma + + "#dma-cells": + const: 1 + + reg: + maxItems: 1 + + interrupts: + description: + Should contain all of the per-channel DMA interrupts in + ascending order with respect to the DMA channel index. + minItems: 1 + maxItems: 31 + + resets: + maxItems: 1 + + reset-names: + const: gpcdma + + iommus: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + - resets + - reset-names + - "#dma-cells" + - iommus + +additionalProperties: false + +examples: + - | + #include + #include + #include + + dma-controller@2600000 { + compatible = "nvidia,tegra186-gpcdma"; + reg = <0x2600000 0x210000>; + resets = <&bpmp TEGRA186_RESET_GPCDMA>; + reset-names = "gpcdma"; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + #dma-cells = <1>; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + }; +... diff --git a/dts/Bindings/dma/qcom,gpi.yaml b/dts/Bindings/dma/qcom,gpi.yaml index d09d79d740..7d2fc4eb55 100644 --- a/dts/Bindings/dma/qcom,gpi.yaml +++ b/dts/Bindings/dma/qcom,gpi.yaml @@ -19,9 +19,12 @@ allOf: properties: compatible: enum: + - qcom,sc7280-gpi-dma - qcom,sdm845-gpi-dma - qcom,sm8150-gpi-dma - qcom,sm8250-gpi-dma + - qcom,sm8350-gpi-dma + - qcom,sm8450-gpi-dma reg: maxItems: 1 diff --git a/dts/Bindings/dma/renesas,rcar-dmac.yaml b/dts/Bindings/dma/renesas,rcar-dmac.yaml index 7c6badf399..7202cd68e7 100644 --- a/dts/Bindings/dma/renesas,rcar-dmac.yaml +++ b/dts/Bindings/dma/renesas,rcar-dmac.yaml @@ -42,11 +42,10 @@ properties: - const: renesas,rcar-dmac - items: - - const: renesas,dmac-r8a779a0 # R-Car V3U - - - items: - - const: renesas,dmac-r8a779f0 # R-Car S4-8 - - const: renesas,rcar-gen4-dmac + - enum: + - renesas,dmac-r8a779a0 # R-Car V3U + - renesas,dmac-r8a779f0 # R-Car S4-8 + - const: renesas,rcar-gen4-dmac # R-Car Gen4 reg: true @@ -121,7 +120,6 @@ if: compatible: contains: enum: - - renesas,dmac-r8a779a0 - renesas,rcar-gen4-dmac then: properties: diff --git a/dts/Bindings/dma/renesas,rzn1-dmamux.yaml b/dts/Bindings/dma/renesas,rzn1-dmamux.yaml new file mode 100644 index 0000000000..d83013b0dd --- /dev/null +++ b/dts/Bindings/dma/renesas,rzn1-dmamux.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/renesas,rzn1-dmamux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 DMA mux + +maintainers: + - Miquel Raynal + +allOf: + - $ref: "dma-router.yaml#" + +properties: + compatible: + const: renesas,rzn1-dmamux + + reg: + maxItems: 1 + description: DMA mux first register offset within the system control parent. + + '#dma-cells': + const: 6 + description: + The first four cells are dedicated to the master DMA controller. The fifth + cell gives the DMA mux bit index that must be set starting from 0. The + sixth cell gives the binary value that must be written there, ie. 0 or 1. + + dma-masters: + minItems: 1 + maxItems: 2 + + dma-requests: + const: 32 + +required: + - reg + - dma-requests + +additionalProperties: false + +examples: + - | + dma-router@a0 { + compatible = "renesas,rzn1-dmamux"; + reg = <0xa0 4>; + #dma-cells = <6>; + dma-masters = <&dma0 &dma1>; + dma-requests = <32>; + }; diff --git a/dts/Bindings/dma/sifive,fu540-c000-pdma.yaml b/dts/Bindings/dma/sifive,fu540-c000-pdma.yaml index 47c46af255..3271755787 100644 --- a/dts/Bindings/dma/sifive,fu540-c000-pdma.yaml +++ b/dts/Bindings/dma/sifive,fu540-c000-pdma.yaml @@ -28,7 +28,15 @@ allOf: properties: compatible: items: - - const: sifive,fu540-c000-pdma + - enum: + - sifive,fu540-c000-pdma + - const: sifive,pdma0 + description: + Should be "sifive,-pdma" and "sifive,pdma". + Supported compatible strings are - + "sifive,fu540-c000-pdma" for the SiFive PDMA v0 as integrated onto the + SiFive FU540 chip resp and "sifive,pdma0" for the SiFive PDMA v0 IP block + with no chip integration tweaks. reg: maxItems: 1 @@ -37,6 +45,12 @@ properties: minItems: 1 maxItems: 8 + dma-channels: + description: For backwards-compatibility, the default value is 4 + minimum: 1 + maximum: 4 + default: 4 + '#dma-cells': const: 1 @@ -50,8 +64,9 @@ unevaluatedProperties: false examples: - | dma-controller@3000000 { - compatible = "sifive,fu540-c000-pdma"; + compatible = "sifive,fu540-c000-pdma", "sifive,pdma0"; reg = <0x3000000 0x8000>; + dma-channels = <4>; interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, <30>; #dma-cells = <1>; }; diff --git a/dts/Bindings/dma/snps,dma-spear1340.yaml b/dts/Bindings/dma/snps,dma-spear1340.yaml index 6b35089ac0..c13649bf7f 100644 --- a/dts/Bindings/dma/snps,dma-spear1340.yaml +++ b/dts/Bindings/dma/snps,dma-spear1340.yaml @@ -15,7 +15,13 @@ allOf: properties: compatible: - const: snps,dma-spear1340 + oneOf: + - const: snps,dma-spear1340 + - items: + - enum: + - renesas,r9a06g032-dma + - const: renesas,rzn1-dma + "#dma-cells": minimum: 3 diff --git a/dts/Bindings/dma/sprd-dma.txt b/dts/Bindings/dma/sprd-dma.txt index adccea9941..c7e9b5fd50 100644 --- a/dts/Bindings/dma/sprd-dma.txt +++ b/dts/Bindings/dma/sprd-dma.txt @@ -8,10 +8,13 @@ Required properties: - interrupts: Should contain one interrupt shared by all channel. - #dma-cells: must be <1>. Used to represent the number of integer cells in the dmas property of client device. -- #dma-channels : Number of DMA channels supported. Should be 32. +- dma-channels : Number of DMA channels supported. Should be 32. - clock-names: Should contain the clock of the DMA controller. - clocks: Should contain a clock specifier for each entry in clock-names. +Deprecated properties: +- #dma-channels : Number of DMA channels supported. Should be 32. + Example: Controller: @@ -20,7 +23,7 @@ apdma: dma-controller@20100000 { reg = <0x20100000 0x4000>; interrupts = ; #dma-cells = <1>; - #dma-channels = <32>; + dma-channels = <32>; clock-names = "enable"; clocks = <&clk_ap_ahb_gates 5>; }; diff --git a/dts/Bindings/dma/st,stm32-dmamux.yaml b/dts/Bindings/dma/st,stm32-dmamux.yaml index 7b1833d6ca..1e1d8549b7 100644 --- a/dts/Bindings/dma/st,stm32-dmamux.yaml +++ b/dts/Bindings/dma/st,stm32-dmamux.yaml @@ -51,4 +51,3 @@ examples: }; ... - diff --git a/dts/Bindings/dma/st,stm32-mdma.yaml b/dts/Bindings/dma/st,stm32-mdma.yaml index 87b4afd2cf..00cfa39136 100644 --- a/dts/Bindings/dma/st,stm32-mdma.yaml +++ b/dts/Bindings/dma/st,stm32-mdma.yaml @@ -104,4 +104,3 @@ examples: }; ... - diff --git a/dts/Bindings/dma/xilinx/xilinx_dma.txt b/dts/Bindings/dma/xilinx/xilinx_dma.txt index 325aca52cd..d1700a5c36 100644 --- a/dts/Bindings/dma/xilinx/xilinx_dma.txt +++ b/dts/Bindings/dma/xilinx/xilinx_dma.txt @@ -110,7 +110,11 @@ axi_vdma_0: axivdma@40030000 { Required properties: - dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs, where Channel ID is '0' for write/tx and '1' for read/rx - channel. + channel. For MCMDA, MM2S channel(write/tx) ID start from + '0' and is in [0-15] range. S2MM channel(read/rx) ID start + from '16' and is in [16-31] range. These channels ID are + fixed irrespective of IP configuration. + - dma-names: a list of DMA channel names, one per "dmas" entry Example: diff --git a/dts/Bindings/dsp/mediatek,mt8195-dsp.yaml b/dts/Bindings/dsp/mediatek,mt8195-dsp.yaml new file mode 100644 index 0000000000..b7e68b0dfa --- /dev/null +++ b/dts/Bindings/dsp/mediatek,mt8195-dsp.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dsp/mediatek,mt8195-dsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek mt8195 DSP core + +maintainers: + - YC Hung + +description: | + Some boards from mt8195 contain a DSP core used for + advanced pre- and post- audio processing. + +properties: + compatible: + const: mediatek,mt8195-dsp + + reg: + items: + - description: Address and size of the DSP Cfg registers + - description: Address and size of the DSP SRAM + + reg-names: + items: + - const: cfg + - const: sram + + clocks: + items: + - description: mux for audio dsp clock + - description: 26M clock + - description: mux for audio dsp local bus + - description: default audio dsp local bus clock source + - description: clock gate for audio dsp clock + - description: mux for audio dsp access external bus + + clock-names: + items: + - const: adsp_sel + - const: clk26m_ck + - const: audio_local_bus + - const: mainpll_d7_d2 + - const: scp_adsp_audiodsp + - const: audio_h + + power-domains: + maxItems: 1 + + mboxes: + items: + - description: ipc reply between host and audio DSP. + - description: ipc request between host and audio DSP. + + mbox-names: + items: + - const: mbox0 + - const: mbox1 + + memory-region: + items: + - description: dma buffer between host and DSP. + - description: DSP system memory. + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - memory-region + - power-domains + - mbox-names + - mboxes + +additionalProperties: false + +examples: + - | + #include + #include + dsp@10803000 { + compatible = "mediatek,mt8195-dsp"; + reg = <0x10803000 0x1000>, + <0x10840000 0x40000>; + reg-names = "cfg", "sram"; + clocks = <&topckgen 10>, //CLK_TOP_ADSP + <&clk26m>, + <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS + <&topckgen 136>, //CLK_TOP_MAINPLL_D7_D2 + <&scp_adsp 0>, //CLK_SCP_ADSP_AUDIODSP + <&topckgen 34>; //CLK_TOP_AUDIO_H + clock-names = "adsp_sel", + "clk26m_ck", + "audio_local_bus", + "mainpll_d7_d2", + "scp_adsp_audiodsp", + "audio_h"; + memory-region = <&adsp_dma_mem_reserved>, + <&adsp_mem_reserved>; + power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP + mbox-names = "mbox0", "mbox1"; + mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>; + }; diff --git a/dts/Bindings/eeprom/at24.txt b/dts/Bindings/eeprom/at24.txt deleted file mode 100644 index c94acbb8cb..0000000000 --- a/dts/Bindings/eeprom/at24.txt +++ /dev/null @@ -1 +0,0 @@ -This file has been moved to at24.yaml. diff --git a/dts/Bindings/eeprom/at24.yaml b/dts/Bindings/eeprom/at24.yaml index 6b61a8cf61..d14e0accbd 100644 --- a/dts/Bindings/eeprom/at24.yaml +++ b/dts/Bindings/eeprom/at24.yaml @@ -120,7 +120,9 @@ properties: - const: giantec,gt24c32a - const: atmel,24c32 - items: - - const: renesas,r1ex24128 + - enum: + - renesas,r1ex24128 + - samsung,s524ad0xd1 - const: atmel,24c128 label: diff --git a/dts/Bindings/example-schema.yaml b/dts/Bindings/example-schema.yaml index 80a2878184..8e1a8b19d4 100644 --- a/dts/Bindings/example-schema.yaml +++ b/dts/Bindings/example-schema.yaml @@ -249,13 +249,13 @@ examples: # be overridden or an appropriate parent bus node should be shown (such as on # i2c buses). # - # Any includes used have to be explicitly included. + # Any includes used have to be explicitly included. Use 4-space indentation. - | node@1000 { - compatible = "vendor,soc4-ip", "vendor,soc1-ip"; - reg = <0x1000 0x80>, - <0x3000 0x80>; - reg-names = "core", "aux"; - interrupts = <10>; - interrupt-controller; + compatible = "vendor,soc4-ip", "vendor,soc1-ip"; + reg = <0x1000 0x80>, + <0x3000 0x80>; + reg-names = "core", "aux"; + interrupts = <10>; + interrupt-controller; }; diff --git a/dts/Bindings/extcon/siliconmitus,sm5502-muic.yaml b/dts/Bindings/extcon/siliconmitus,sm5502-muic.yaml index fd2e550888..7a224b2f09 100644 --- a/dts/Bindings/extcon/siliconmitus,sm5502-muic.yaml +++ b/dts/Bindings/extcon/siliconmitus,sm5502-muic.yaml @@ -20,11 +20,12 @@ properties: enum: - siliconmitus,sm5502-muic - siliconmitus,sm5504-muic + - siliconmitus,sm5703-muic reg: maxItems: 1 - description: I2C slave address of the device. Usually 0x25 for SM5502, - 0x14 for SM5504. + description: I2C slave address of the device. Usually 0x25 for SM5502 + and SM5703, 0x14 for SM5504. interrupts: maxItems: 1 diff --git a/dts/Bindings/firmware/qcom,scm.txt b/dts/Bindings/firmware/qcom,scm.txt index b1cd4ad188..0f4e5ab264 100644 --- a/dts/Bindings/firmware/qcom,scm.txt +++ b/dts/Bindings/firmware/qcom,scm.txt @@ -19,6 +19,7 @@ Required properties: * "qcom,scm-msm8953" * "qcom,scm-msm8960" * "qcom,scm-msm8974" + * "qcom,scm-msm8976" * "qcom,scm-msm8994" * "qcom,scm-msm8996" * "qcom,scm-msm8998" @@ -37,7 +38,7 @@ Required properties: * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and "qcom,scm-msm8960" * core, iface and bus clocks required for "qcom,scm-apq8084", - "qcom,scm-msm8916", "qcom,scm-msm8953" and "qcom,scm-msm8974" + "qcom,scm-msm8916", "qcom,scm-msm8953", "qcom,scm-msm8974" and "qcom,scm-msm8976" - clock-names: Must contain "core" for the core clock, "iface" for the interface clock and "bus" for the bus clock per the requirements of the compatible. - qcom,dload-mode: phandle to the TCSR hardware block and offset of the diff --git a/dts/Bindings/gnss/brcm,bcm4751.yaml b/dts/Bindings/gnss/brcm,bcm4751.yaml new file mode 100644 index 0000000000..e62b30386a --- /dev/null +++ b/dts/Bindings/gnss/brcm,bcm4751.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gnss/brcm,bcm4751.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4751 family GNSS Receiver Device Tree Bindings + +maintainers: + - Johan Hovold + - Linus Walleij + +description: + Broadcom GPS chips can be used over the UART or I2C bus. The UART + bus requires CTS/RTS support. The number of the capsule is more + elaborate than the compatibles BCM4751 may be printed + BCM4751IFBG for example. + +allOf: + - $ref: gnss-common.yaml# + +properties: + compatible: + enum: + - brcm,bcm4751 + - brcm,bcm4752 + - brcm,bcm4753 + + reg: + description: + The I2C Address, not required on UART buses. + + vdd-auxin-supply: + description: + Main voltage supply, pin name VDD_AUXIN, typically connected + directly to a battery such as LiIon 3.8V battery or a 2.6V supply. + + vddio-supply: + description: + IO voltage supply, pin name VDDIO, typically 1.8V + + reset-gpios: + maxItems: 1 + description: An optional active low reset line, should be flagged with + GPIO_ACTIVE_LOW. + + enable-gpios: + description: Enable GPIO line, connected to pins named REGPU or NSTANDBY. + If the line is active low such as NSTANDBY, it should be tagged + GPIO_ACTIVE_LOW. + +required: + - compatible + - enable-gpios + +unevaluatedProperties: false + +examples: + - | + #include + serial { + gnss { + compatible = "brcm,bcm4751"; + vdd-auxin-supply = <&vbat>; + reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + current-speed = <38400>; + }; + }; diff --git a/dts/Bindings/gnss/mediatek.txt b/dts/Bindings/gnss/mediatek.txt deleted file mode 100644 index 80cb802813..0000000000 --- a/dts/Bindings/gnss/mediatek.txt +++ /dev/null @@ -1,35 +0,0 @@ -Mediatek-based GNSS Receiver DT binding - -Mediatek chipsets are used in GNSS-receiver modules produced by several -vendors and can use a UART interface. - -Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic -properties. - -Required properties: - -- compatible : Must be - - "globaltop,pa6h" - -- vcc-supply : Main voltage regulator (pin name: VCC) - -Optional properties: - -- current-speed : Default UART baud rate -- gnss-fix-gpios : GPIO used to determine device position fix state - (pin name: FIX, 3D_FIX) -- reset-gpios : GPIO used to reset the device (pin name: RESET, NRESET) -- timepulse-gpios : Time pulse GPIO (pin name: PPS1, 1PPS) -- vbackup-supply : Backup voltage regulator (pin name: VBAT, VBACKUP) - -Example: - -serial@1234 { - compatible = "ns16550a"; - - gnss { - compatible = "globaltop,pa6h"; - vcc-supply = <&vcc_3v3>; - }; -}; diff --git a/dts/Bindings/gnss/mediatek.yaml b/dts/Bindings/gnss/mediatek.yaml new file mode 100644 index 0000000000..45cf01b277 --- /dev/null +++ b/dts/Bindings/gnss/mediatek.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gnss/mediatek.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek GNSS Receiver Device Tree Bindings + +maintainers: + - Johan Hovold + +description: + Mediatek chipsets are used in GNSS-receiver modules produced by several + vendors and can use a UART interface. + +allOf: + - $ref: gnss-common.yaml# + +properties: + compatible: + const: globaltop,pa6h + + vcc-supply: + description: + Main voltage regulator, pin name VCC. + + reset-gpios: + maxItems: 1 + description: An optional reset line, with names such as RESET or NRESET. + If the line is active low it should be flagged with GPIO_ACTIVE_LOW. + + timepulse-gpios: + description: Comes with pin names such as PPS1 or 1PPS. + + gnss-fix-gpios: + maxItems: 1 + description: GPIO used to determine device position fix state, pin names + FIX or 3D_FIX. + + vbackup-supply: + description: + Regulator providing backup voltage, pin names such as VBAT or VBACKUP. + +required: + - compatible + - vcc-supply + +unevaluatedProperties: false + +examples: + - | + #include + serial { + gnss { + compatible = "globaltop,pa6h"; + vcc-supply = <&vcc_3v3>; + reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/dts/Bindings/gpio/fairchild,74hc595.yaml b/dts/Bindings/gpio/fairchild,74hc595.yaml index 5fe19fa5f6..a99e7842ca 100644 --- a/dts/Bindings/gpio/fairchild,74hc595.yaml +++ b/dts/Bindings/gpio/fairchild,74hc595.yaml @@ -26,6 +26,7 @@ properties: const: 2 registers-number: + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of daisy-chained shift registers enable-gpios: diff --git a/dts/Bindings/gpio/gpio-altera.txt b/dts/Bindings/gpio/gpio-altera.txt index 146e554b3c..2a80e272cd 100644 --- a/dts/Bindings/gpio/gpio-altera.txt +++ b/dts/Bindings/gpio/gpio-altera.txt @@ -9,8 +9,9 @@ Required properties: - The second cell is reserved and is currently unused. - gpio-controller : Marks the device node as a GPIO controller. - interrupt-controller: Mark the device node as an interrupt controller -- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware. +- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware. - The first cell is the GPIO offset number within the GPIO controller. + - The second cell is the interrupt trigger type and level flags. - interrupts: Specify the interrupt. - altr,interrupt-type: Specifies the interrupt trigger type the GPIO hardware is synthesized. This field is required if the Altera GPIO controller @@ -38,6 +39,6 @@ gpio_altr: gpio@ff200000 { altr,interrupt-type = ; #gpio-cells = <2>; gpio-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; interrupt-controller; }; diff --git a/dts/Bindings/gpio/gpio-consumer-common.yaml b/dts/Bindings/gpio/gpio-consumer-common.yaml new file mode 100644 index 0000000000..40d0be31e2 --- /dev/null +++ b/dts/Bindings/gpio/gpio-consumer-common.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-consumer-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common GPIO lines + +maintainers: + - Bartosz Golaszewski + - Linus Walleij + +description: + Pay attention to using proper GPIO flag (e.g. GPIO_ACTIVE_LOW) for the GPIOs + using inverted signal (e.g. RESETN). + +select: true + +properties: + enable-gpios: + maxItems: 1 + description: + GPIO connected to the enable control pin. + + reset-gpios: + description: + GPIO (or GPIOs for power sequence) connected to the device reset pin + (e.g. RESET or RESETN). + + powerdown-gpios: + maxItems: 1 + description: + GPIO connected to the power down pin (hardware power down or power cut, + e.g. PD or PWDN). + + pwdn-gpios: + maxItems: 1 + description: Use powerdown-gpios + deprecated: true + + wakeup-gpios: + maxItems: 1 + description: + GPIO connected to the pin waking up the device from suspend or other + power-saving modes. + +allOf: + - if: + properties: + compatible: + contains: + enum: + - mmc-pwrseq-simple + then: + properties: + reset-gpios: + minItems: 1 + maxItems: 32 + else: + properties: + reset-gpios: + maxItems: 1 + +additionalProperties: true diff --git a/dts/Bindings/gpio/gpio-pca95xx.yaml b/dts/Bindings/gpio/gpio-pca95xx.yaml index dc0fc8fc48..977b14db09 100644 --- a/dts/Bindings/gpio/gpio-pca95xx.yaml +++ b/dts/Bindings/gpio/gpio-pca95xx.yaml @@ -30,6 +30,7 @@ properties: - maxim,max7325 - maxim,max7326 - maxim,max7327 + - nxp,pca6408 - nxp,pca6416 - nxp,pca9505 - nxp,pca9506 diff --git a/dts/Bindings/gpio/realtek,otto-gpio.yaml b/dts/Bindings/gpio/realtek,otto-gpio.yaml index 100f20cebd..39fd959c45 100644 --- a/dts/Bindings/gpio/realtek,otto-gpio.yaml +++ b/dts/Bindings/gpio/realtek,otto-gpio.yaml @@ -28,10 +28,11 @@ properties: - enum: - realtek,rtl8380-gpio - realtek,rtl8390-gpio + - realtek,rtl9300-gpio + - realtek,rtl9310-gpio - const: realtek,otto-gpio - reg: - maxItems: 1 + reg: true "#gpio-cells": const: 2 @@ -50,6 +51,23 @@ properties: interrupts: maxItems: 1 +if: + properties: + compatible: + contains: + const: realtek,rtl9300-gpio +then: + properties: + reg: + items: + - description: GPIO and interrupt control + - description: interrupt CPU map +else: + properties: + reg: + items: + - description: GPIO and interrupt control + required: - compatible - reg @@ -74,5 +92,17 @@ examples: interrupt-parent = <&rtlintc>; interrupts = <23>; }; + - | + gpio@3300 { + compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio"; + reg = <0x3300 0x1c>, <0x3338 0x8>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <24>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&rtlintc>; + interrupts = <13>; + }; ... diff --git a/dts/Bindings/gpio/renesas,rcar-gpio.yaml b/dts/Bindings/gpio/renesas,rcar-gpio.yaml index f2541739ee..0681a4790c 100644 --- a/dts/Bindings/gpio/renesas,rcar-gpio.yaml +++ b/dts/Bindings/gpio/renesas,rcar-gpio.yaml @@ -51,6 +51,11 @@ properties: - items: - const: renesas,gpio-r8a779a0 # R-Car V3U + - items: + - enum: + - renesas,gpio-r8a779f0 # R-Car S4-8 + - const: renesas,rcar-gen4-gpio # R-Car Gen4 + reg: maxItems: 1 diff --git a/dts/Bindings/gpio/socionext,uniphier-gpio.yaml b/dts/Bindings/gpio/socionext,uniphier-gpio.yaml index bcafa494ed..228fa27ffd 100644 --- a/dts/Bindings/gpio/socionext,uniphier-gpio.yaml +++ b/dts/Bindings/gpio/socionext,uniphier-gpio.yaml @@ -52,6 +52,23 @@ properties: triplets. $ref: /schemas/types.yaml#/definitions/uint32-matrix +patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + properties: + gpio-hog: true + gpios: true + input: true + output-high: true + output-low: true + line-name: true + + required: + - gpio-hog + - gpios + + additionalProperties: false + required: - compatible - reg diff --git a/dts/Bindings/gpu/samsung-rotator.yaml b/dts/Bindings/gpu/samsung-rotator.yaml index 62486f5517..d60626ffb2 100644 --- a/dts/Bindings/gpu/samsung-rotator.yaml +++ b/dts/Bindings/gpu/samsung-rotator.yaml @@ -53,4 +53,3 @@ examples: clocks = <&clock 278>; clock-names = "rotator"; }; - diff --git a/dts/Bindings/h8300/cpu.txt b/dts/Bindings/h8300/cpu.txt deleted file mode 100644 index 70cd58608f..0000000000 --- a/dts/Bindings/h8300/cpu.txt +++ /dev/null @@ -1,13 +0,0 @@ -* H8/300 CPU bindings - -Required properties: - -- compatible: Compatible property value should be "renesas,h8300". -- clock-frequency: Contains the clock frequency for CPU, in Hz. - -Example: - - cpu@0 { - compatible = "renesas,h8300"; - clock-frequency = <20000000>; - }; diff --git a/dts/Bindings/hwmon/adt7475.yaml b/dts/Bindings/hwmon/adt7475.yaml index 7d9c083632..56baf2e5c6 100644 --- a/dts/Bindings/hwmon/adt7475.yaml +++ b/dts/Bindings/hwmon/adt7475.yaml @@ -61,6 +61,26 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] + "adi,pin(5|10)-function": + description: | + Configures the function for pin 5 on the adi,adt7473 and adi,adt7475. Or + pin 10 on the adi,adt7476 and adi,adt7490. + $ref: /schemas/types.yaml#/definitions/string + enum: + - pwm2 + - smbalert# + + "adi,pin(9|14)-function": + description: | + Configures the function for pin 9 on the adi,adt7473 and adi,adt7475. Or + pin 14 on the adi,adt7476 and adi,adt7490 + $ref: /schemas/types.yaml#/definitions/string + enum: + - tach4 + - therm# + - smbalert# + - gpio + required: - compatible - reg @@ -79,6 +99,7 @@ examples: adi,bypass-attenuator-in0 = <1>; adi,bypass-attenuator-in1 = <0>; adi,pwm-active-state = <1 0 1>; + adi,pin10-function = "smbalert#"; + adi,pin14-function = "tach4"; }; }; - diff --git a/dts/Bindings/hwmon/lm75.yaml b/dts/Bindings/hwmon/lm75.yaml index 72980d083c..8226e3b5d0 100644 --- a/dts/Bindings/hwmon/lm75.yaml +++ b/dts/Bindings/hwmon/lm75.yaml @@ -14,6 +14,7 @@ properties: compatible: enum: - adi,adt75 + - atmel,at30ts74 - dallas,ds1775 - dallas,ds75 - dallas,ds7505 diff --git a/dts/Bindings/hwmon/microchip,lan966x.yaml b/dts/Bindings/hwmon/microchip,lan966x.yaml new file mode 100644 index 0000000000..390dd6755f --- /dev/null +++ b/dts/Bindings/hwmon/microchip,lan966x.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/microchip,lan966x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip LAN966x Hardware Monitor + +maintainers: + - Michael Walle + +description: | + Microchip LAN966x temperature monitor and fan controller + +properties: + compatible: + enum: + - microchip,lan9668-hwmon + + reg: + items: + - description: PVT registers + - description: FAN registers + + reg-names: + items: + - const: pvt + - const: fan + + clocks: + maxItems: 1 + + '#thermal-sensor-cells': + const: 0 + +required: + - compatible + - reg + - reg-names + - clocks + +additionalProperties: false + +examples: + - | + hwmon: hwmon@e2010180 { + compatible = "microchip,lan9668-hwmon"; + reg = <0xe2010180 0xc>, + <0xe20042a8 0xc>; + reg-names = "pvt", "fan"; + clocks = <&sys_clk>; + #thermal-sensor-cells = <0>; + }; diff --git a/dts/Bindings/hwmon/national,lm90.yaml b/dts/Bindings/hwmon/national,lm90.yaml index 30db929779..b046578498 100644 --- a/dts/Bindings/hwmon/national,lm90.yaml +++ b/dts/Bindings/hwmon/national,lm90.yaml @@ -34,6 +34,7 @@ properties: - nxp,sa56004 - onnn,nct1008 - ti,tmp451 + - ti,tmp461 - winbond,w83l771 @@ -52,10 +53,29 @@ properties: vcc-supply: description: phandle to the regulator that provides the +VCC supply + ti,extended-range-enable: + description: Set to enable extended range temperature. + type: boolean + required: - compatible - reg +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - adi,adt7461 + - adi,adt7461a + - ti,tmp451 + - ti,tmp461 + then: + properties: + ti,extended-range-enable: false + additionalProperties: false examples: diff --git a/dts/Bindings/hwmon/nuvoton,nct6775.yaml b/dts/Bindings/hwmon/nuvoton,nct6775.yaml new file mode 100644 index 0000000000..358b262431 --- /dev/null +++ b/dts/Bindings/hwmon/nuvoton,nct6775.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/nuvoton,nct6775.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NCT6775 and compatible Super I/O chips + +maintainers: + - Zev Weiss + +properties: + compatible: + enum: + - nuvoton,nct6106 + - nuvoton,nct6116 + - nuvoton,nct6775 + - nuvoton,nct6776 + - nuvoton,nct6779 + - nuvoton,nct6791 + - nuvoton,nct6792 + - nuvoton,nct6793 + - nuvoton,nct6795 + - nuvoton,nct6796 + - nuvoton,nct6797 + - nuvoton,nct6798 + + reg: + maxItems: 1 + + nuvoton,tsi-channel-mask: + description: + Bitmask indicating which TSI temperature sensor channels are + active. LSB is TSI0, bit 1 is TSI1, etc. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 0xff + default: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + superio@4d { + compatible = "nuvoton,nct6779"; + reg = <0x4d>; + nuvoton,tsi-channel-mask = <0x03>; + }; + }; diff --git a/dts/Bindings/hwmon/ti,tmp401.yaml b/dts/Bindings/hwmon/ti,tmp401.yaml new file mode 100644 index 0000000000..fe0ac08faa --- /dev/null +++ b/dts/Bindings/hwmon/ti,tmp401.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,tmp401.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP401, TPM411 and TMP43x temperature sensor + +maintainers: + - Guenter Roeck + +description: | + ±1°C Remote and Local temperature sensor + + Datasheets: + https://www.ti.com/lit/ds/symlink/tmp401.pdf + https://www.ti.com/lit/ds/symlink/tmp411.pdf + https://www.ti.com/lit/ds/symlink/tmp431.pdf + https://www.ti.com/lit/ds/symlink/tmp435.pdf + +properties: + compatible: + enum: + - ti,tmp401 + - ti,tmp411 + - ti,tmp431 + - ti,tmp432 + - ti,tmp435 + + reg: + maxItems: 1 + + ti,extended-range-enable: + description: + When set, this sensor measures over extended temperature range. + type: boolean + + ti,n-factor: + description: + value to be used for converting remote channel measurements to + temperature. + $ref: /schemas/types.yaml#/definitions/int32 + items: + minimum: -128 + maximum: 127 + + ti,beta-compensation: + description: + value to select beta correction range. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - ti,tmp401 + then: + properties: + ti,n-factor: false + + - if: + properties: + compatible: + contains: + enum: + - ti,tmp401 + - ti,tmp411 + then: + properties: + ti,beta-compensation: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "ti,tmp401"; + reg = <0x4c>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "ti,tmp431"; + reg = <0x4c>; + ti,extended-range-enable; + ti,n-factor = <0x3b>; + ti,beta-compensation = <0x7>; + }; + }; diff --git a/dts/Bindings/i2c/i2c-gate.yaml b/dts/Bindings/i2c/i2c-gate.yaml index bd67b07665..0cdc3e890d 100644 --- a/dts/Bindings/i2c/i2c-gate.yaml +++ b/dts/Bindings/i2c/i2c-gate.yaml @@ -36,4 +36,3 @@ examples: }; }; ... - diff --git a/dts/Bindings/i2c/i2c-mt65xx.txt b/dts/Bindings/i2c/i2c-mt65xx.txt deleted file mode 100644 index 026985b8f6..0000000000 --- a/dts/Bindings/i2c/i2c-mt65xx.txt +++ /dev/null @@ -1,53 +0,0 @@ -* MediaTek's I2C controller - -The MediaTek's I2C controller is used to interface with I2C devices. - -Required properties: - - compatible: value should be either of the following. - "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701 - "mediatek,mt2712-i2c": for MediaTek MT2712 - "mediatek,mt6577-i2c": for MediaTek MT6577 - "mediatek,mt6589-i2c": for MediaTek MT6589 - "mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797 - "mediatek,mt7622-i2c": for MediaTek MT7622 - "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623 - "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629 - "mediatek,mt8168-i2c": for MediaTek MT8168 - "mediatek,mt8173-i2c": for MediaTek MT8173 - "mediatek,mt8183-i2c": for MediaTek MT8183 - "mediatek,mt8186-i2c": for MediaTek MT8186 - "mediatek,mt8192-i2c": for MediaTek MT8192 - "mediatek,mt8195-i2c", "mediatek,mt8192-i2c": for MediaTek MT8195 - "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516 - - reg: physical base address of the controller and dma base, length of memory - mapped region. - - interrupts: interrupt number to the cpu. - - clock-div: the fixed value for frequency divider of clock source in i2c - module. Each IC may be different. - - clocks: clock name from clock manager - - clock-names: Must include "main" and "dma", "arb" is for multi-master that - one bus has more than two i2c controllers, if enable have-pmic need include - "pmic" extra. - -Optional properties: - - clock-frequency: Frequency in Hz of the bus when transfer, the default value - is 100000. - - mediatek,have-pmic: platform can control i2c form special pmic side. - Only mt6589 and mt8135 support this feature. - - mediatek,use-push-pull: IO config use push-pull mode. - - vbus-supply: phandle to the regulator that provides power to SCL/SDA. - -Example: - - i2c0: i2c@1100d000 { - compatible = "mediatek,mt6577-i2c"; - reg = <0x1100d000 0x70>, - <0x11000300 0x80>; - interrupts = ; - clock-frequency = <400000>; - mediatek,have-pmic; - clock-div = <16>; - clocks = <&i2c0_ck>, <&ap_dma_ck>; - clock-names = "main", "dma"; - }; - diff --git a/dts/Bindings/i2c/i2c-mt65xx.yaml b/dts/Bindings/i2c/i2c-mt65xx.yaml new file mode 100644 index 0000000000..16a1a31182 --- /dev/null +++ b/dts/Bindings/i2c/i2c-mt65xx.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mt65xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek I2C controller + +description: + This driver interfaces with the native I2C controller present in + various MediaTek SoCs. + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +maintainers: + - Qii Wang + +properties: + compatible: + oneOf: + - const: mediatek,mt2712-i2c + - const: mediatek,mt6577-i2c + - const: mediatek,mt6589-i2c + - const: mediatek,mt7622-i2c + - const: mediatek,mt8168-i2c + - const: mediatek,mt8173-i2c + - const: mediatek,mt8183-i2c + - const: mediatek,mt8186-i2c + - const: mediatek,mt8192-i2c + - items: + - enum: + - mediatek,mt7629-i2c + - mediatek,mt8516-i2c + - const: mediatek,mt2712-i2c + - items: + - enum: + - mediatek,mt2701-i2c + - mediatek,mt6797-i2c + - mediatek,mt7623-i2c + - const: mediatek,mt6577-i2c + - items: + - enum: + - mediatek,mt8195-i2c + - const: mediatek,mt8192-i2c + + reg: + items: + - description: Physical base address + - description: DMA base address + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + items: + - description: Main clock for I2C bus + - description: Clock for I2C via DMA + - description: Bus arbitrator clock + - description: Clock for I2C from PMIC + + clock-names: + minItems: 2 + items: + - const: main + - const: dma + - const: arb + - const: pmic + + clock-div: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Frequency divider of clock source in I2C module + + clock-frequency: + default: 100000 + description: + SCL frequency to use (in Hz). If omitted, 100kHz is used. + + mediatek,have-pmic: + description: Platform controls I2C from PMIC side + type: boolean + + mediatek,use-push-pull: + description: Use push-pull mode I/O config + type: boolean + + vbus-supply: + description: Phandle to the regulator providing power to SCL/SDA + +required: + - compatible + - reg + - clocks + - clock-names + - clock-div + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + #include + + i2c0: i2c@1100d000 { + compatible = "mediatek,mt6577-i2c"; + reg = <0x1100d000 0x70>, <0x11000300 0x80>; + interrupts = ; + clocks = <&i2c0_ck>, <&ap_dma_ck>; + clock-names = "main", "dma"; + clock-div = <16>; + clock-frequency = <400000>; + mediatek,have-pmic; + + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/dts/Bindings/i2c/i2c-mux-gpmux.yaml b/dts/Bindings/i2c/i2c-mux-gpmux.yaml index 9b0603a72f..b6af924dee 100644 --- a/dts/Bindings/i2c/i2c-mux-gpmux.yaml +++ b/dts/Bindings/i2c/i2c-mux-gpmux.yaml @@ -28,7 +28,6 @@ description: |+ '------------' '-----' '-----' '-----' - allOf: - $ref: /schemas/i2c/i2c-mux.yaml# diff --git a/dts/Bindings/i2c/qcom,i2c-geni-qcom.yaml b/dts/Bindings/i2c/qcom,i2c-geni-qcom.yaml new file mode 100644 index 0000000000..0e7ed00562 --- /dev/null +++ b/dts/Bindings/i2c/qcom,i2c-geni-qcom.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Geni based QUP I2C Controller + +maintainers: + - Andy Gross + - Bjorn Andersson + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: qcom,geni-i2c + + clocks: + maxItems: 1 + + clock-names: + const: se + + clock-frequency: + default: 100000 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interconnects: + maxItems: 3 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + - const: qup-memory + + interrupts: + maxItems: 1 + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + required-opps: + maxItems: 1 + +required: + - compatible + - interrupts + - clocks + - clock-names + - reg + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + + i2c@88000 { + compatible = "qcom,geni-i2c"; + reg = <0x00880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + }; +... diff --git a/dts/Bindings/i2c/qcom,i2c-qup.txt b/dts/Bindings/i2c/qcom,i2c-qup.txt deleted file mode 100644 index dc71754a56..0000000000 --- a/dts/Bindings/i2c/qcom,i2c-qup.txt +++ /dev/null @@ -1,40 +0,0 @@ -Qualcomm Universal Peripheral (QUP) I2C controller - -Required properties: - - compatible: Should be: - * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064. - * "qcom,i2c-qup-v2.1.1" for 8974 v1. - * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later. - - reg: Should contain QUP register address and length. - - interrupts: Should contain I2C interrupt. - - - clocks: A list of phandles + clock-specifiers, one for each entry in - clock-names. - - clock-names: Should contain: - * "core" for the core clock - * "iface" for the AHB clock - - - #address-cells: Should be <1> Address cells for i2c device address - - #size-cells: Should be <0> as i2c addresses have no size component - -Optional properties: - - clock-frequency: Should specify the desired i2c bus clock frequency in Hz, - defaults to 100kHz if omitted. - -Child nodes should conform to i2c bus binding. - -Example: - - i2c@f9924000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9924000 0x1000>; - interrupts = <0 96 0>; - - clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - - clock-frequency = <355000>; - - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/dts/Bindings/i2c/qcom,i2c-qup.yaml b/dts/Bindings/i2c/qcom,i2c-qup.yaml new file mode 100644 index 0000000000..f43947514d --- /dev/null +++ b/dts/Bindings/i2c/qcom,i2c-qup.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/qcom,i2c-qup.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Universal Peripheral (QUP) I2C controller + +maintainers: + - Andy Gross + - Bjorn Andersson + - Krzysztof Kozlowski + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - qcom,i2c-qup-v1.1.1 # for 8660, 8960 and 8064 + - qcom,i2c-qup-v2.1.1 # for 8974 v1 + - qcom,i2c-qup-v2.2.1 # for 8974 v2 and later + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: iface + + clock-frequency: + default: 100000 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + reg: + maxItems: 1 + +required: + - compatible + - clock-names + - clocks + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include + #include + + i2c@c175000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/dts/Bindings/i2c/renesas,rcar-i2c.yaml b/dts/Bindings/i2c/renesas,rcar-i2c.yaml index c30107833a..f9929578c7 100644 --- a/dts/Bindings/i2c/renesas,rcar-i2c.yaml +++ b/dts/Bindings/i2c/renesas,rcar-i2c.yaml @@ -46,11 +46,11 @@ properties: - renesas,i2c-r8a77980 # R-Car V3H - renesas,i2c-r8a77990 # R-Car E3 - renesas,i2c-r8a77995 # R-Car D3 - - renesas,i2c-r8a779a0 # R-Car V3U - const: renesas,rcar-gen3-i2c # R-Car Gen3 and RZ/G2 - items: - enum: + - renesas,i2c-r8a779a0 # R-Car V3U - renesas,i2c-r8a779f0 # R-Car S4-8 - const: renesas,rcar-gen4-i2c # R-Car Gen4 diff --git a/dts/Bindings/i2c/renesas,riic.yaml b/dts/Bindings/i2c/renesas,riic.yaml index f4b235a87a..2f315489aa 100644 --- a/dts/Bindings/i2c/renesas,riic.yaml +++ b/dts/Bindings/i2c/renesas,riic.yaml @@ -19,6 +19,7 @@ properties: - enum: - renesas,riic-r7s72100 # RZ/A1H - renesas,riic-r7s9210 # RZ/A2M + - renesas,riic-r9a07g043 # RZ/G2UL - renesas,riic-r9a07g044 # RZ/G2{L,LC} - renesas,riic-r9a07g054 # RZ/V2L - const: renesas,riic-rz # RZ/A or RZ/G2L @@ -75,6 +76,7 @@ if: compatible: contains: enum: + - renesas,riic-r9a07g043 - renesas,riic-r9a07g044 - renesas,riic-r9a07g054 then: diff --git a/dts/Bindings/i2c/samsung,s3c2410-i2c.yaml b/dts/Bindings/i2c/samsung,s3c2410-i2c.yaml index c262305189..3d5782deb9 100644 --- a/dts/Bindings/i2c/samsung,s3c2410-i2c.yaml +++ b/dts/Bindings/i2c/samsung,s3c2410-i2c.yaml @@ -123,7 +123,7 @@ examples: samsung,i2c-slave-addr = <0x66>; eeprom@50 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x50>; }; }; diff --git a/dts/Bindings/i3c/cdns,i3c-master.txt b/dts/Bindings/i3c/cdns,i3c-master.txt deleted file mode 100644 index 3716589d69..0000000000 --- a/dts/Bindings/i3c/cdns,i3c-master.txt +++ /dev/null @@ -1,43 +0,0 @@ -Bindings for cadence I3C master block -===================================== - -Required properties: --------------------- -- compatible: shall be "cdns,i3c-master" -- clocks: shall reference the pclk and sysclk -- clock-names: shall contain "pclk" and "sysclk" -- interrupts: the interrupt line connected to this I3C master -- reg: I3C master registers - -Mandatory properties defined by the generic binding (see -Documentation/devicetree/bindings/i3c/i3c.yaml for more details): - -- #address-cells: shall be set to 1 -- #size-cells: shall be set to 0 - -Optional properties defined by the generic binding (see -Documentation/devicetree/bindings/i3c/i3c.yaml for more details): - -- i2c-scl-hz -- i3c-scl-hz - -I3C device connected on the bus follow the generic description (see -Documentation/devicetree/bindings/i3c/i3c.yaml for more details). - -Example: - - i3c-master@0d040000 { - compatible = "cdns,i3c-master"; - clocks = <&coreclock>, <&i3csysclock>; - clock-names = "pclk", "sysclk"; - interrupts = <3 0>; - reg = <0x0d040000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - i2c-scl-hz = <100000>; - - nunchuk: nunchuk@52 { - compatible = "nintendo,nunchuk"; - reg = <0x52 0x0 0x10>; - }; - }; diff --git a/dts/Bindings/i3c/cdns,i3c-master.yaml b/dts/Bindings/i3c/cdns,i3c-master.yaml new file mode 100644 index 0000000000..cc40d25358 --- /dev/null +++ b/dts/Bindings/i3c/cdns,i3c-master.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i3c/cdns,i3c-master.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence I3C master block + +maintainers: + - Boris Brezillon + +allOf: + - $ref: i3c.yaml# + +properties: + compatible: + const: cdns,i3c-master + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: pclk + - const: sysclk + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + i3c-master@d040000 { + compatible = "cdns,i3c-master"; + clocks = <&coreclock>, <&i3csysclock>; + clock-names = "pclk", "sysclk"; + interrupts = <3 0>; + reg = <0x0d040000 0x1000>; + #address-cells = <3>; + #size-cells = <0>; + i2c-scl-hz = <100000>; + + eeprom@57{ + compatible = "atmel,24c01"; + reg = <0x57 0x0 0x10>; + pagesize = <0x8>; + }; + }; +... diff --git a/dts/Bindings/i3c/snps,dw-i3c-master.txt b/dts/Bindings/i3c/snps,dw-i3c-master.txt deleted file mode 100644 index 07f35f3608..0000000000 --- a/dts/Bindings/i3c/snps,dw-i3c-master.txt +++ /dev/null @@ -1,41 +0,0 @@ -Bindings for Synopsys DesignWare I3C master block -================================================= - -Required properties: --------------------- -- compatible: shall be "snps,dw-i3c-master-1.00a" -- clocks: shall reference the core_clk -- interrupts: the interrupt line connected to this I3C master -- reg: Offset and length of I3C master registers - -Mandatory properties defined by the generic binding (see -Documentation/devicetree/bindings/i3c/i3c.yaml for more details): - -- #address-cells: shall be set to 3 -- #size-cells: shall be set to 0 - -Optional properties defined by the generic binding (see -Documentation/devicetree/bindings/i3c/i3c.yaml for more details): - -- i2c-scl-hz -- i3c-scl-hz - -I3C device connected on the bus follow the generic description (see -Documentation/devicetree/bindings/i3c/i3c.yaml for more details). - -Example: - - i3c-master@2000 { - compatible = "snps,dw-i3c-master-1.00a"; - #address-cells = <3>; - #size-cells = <0>; - reg = <0x02000 0x1000>; - interrupts = <0>; - clocks = <&i3cclk>; - - eeprom@57{ - compatible = "atmel,24c01"; - reg = <0x57 0x0 0x10>; - pagesize = <0x8>; - }; - }; diff --git a/dts/Bindings/i3c/snps,dw-i3c-master.yaml b/dts/Bindings/i3c/snps,dw-i3c-master.yaml new file mode 100644 index 0000000000..7a76fd3296 --- /dev/null +++ b/dts/Bindings/i3c/snps,dw-i3c-master.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i3c/snps,dw-i3c-master.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare I3C master block + +maintainers: + - Alexandre Belloni + +allOf: + - $ref: i3c.yaml# + +properties: + compatible: + const: snps,dw-i3c-master-1.00a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +unevaluatedProperties: false + +examples: + - | + i3c-master@2000 { + compatible = "snps,dw-i3c-master-1.00a"; + #address-cells = <3>; + #size-cells = <0>; + reg = <0x02000 0x1000>; + interrupts = <0>; + clocks = <&i3cclk>; + + eeprom@57{ + compatible = "atmel,24c01"; + reg = <0x57 0x0 0x10>; + pagesize = <0x8>; + }; + }; +... diff --git a/dts/Bindings/iio/adc/adi,ad7291.yaml b/dts/Bindings/iio/adc/adi,ad7291.yaml index 930f9e3904..0b2f5dc806 100644 --- a/dts/Bindings/iio/adc/adi,ad7291.yaml +++ b/dts/Bindings/iio/adc/adi,ad7291.yaml @@ -44,4 +44,3 @@ examples: }; }; ... - diff --git a/dts/Bindings/iio/adc/renesas,rzg2l-adc.yaml b/dts/Bindings/iio/adc/renesas,rzg2l-adc.yaml index c80201d6a7..d66c24cae1 100644 --- a/dts/Bindings/iio/adc/renesas,rzg2l-adc.yaml +++ b/dts/Bindings/iio/adc/renesas,rzg2l-adc.yaml @@ -19,7 +19,8 @@ properties: compatible: items: - enum: - - renesas,r9a07g044-adc # RZ/G2{L,LC} + - renesas,r9a07g044-adc # RZ/G2L + - renesas,r9a07g054-adc # RZ/V2L - const: renesas,rzg2l-adc reg: diff --git a/dts/Bindings/iio/adc/sprd,sc2720-adc.yaml b/dts/Bindings/iio/adc/sprd,sc2720-adc.yaml index caa3ee0b4b..44aa28b591 100644 --- a/dts/Bindings/iio/adc/sprd,sc2720-adc.yaml +++ b/dts/Bindings/iio/adc/sprd,sc2720-adc.yaml @@ -20,6 +20,7 @@ properties: - sprd,sc2723-adc - sprd,sc2730-adc - sprd,sc2731-adc + - sprd,ump9620-adc reg: maxItems: 1 @@ -33,13 +34,39 @@ properties: hwlocks: maxItems: 1 - nvmem-cells: - maxItems: 2 + nvmem-cells: true - nvmem-cell-names: - items: - - const: big_scale_calib - - const: small_scale_calib + nvmem-cell-names: true + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - sprd,ump9620-adc + then: + properties: + nvmem-cells: + maxItems: 2 + nvmem-cell-names: + items: + - const: big_scale_calib + - const: small_scale_calib + + else: + properties: + nvmem-cells: + maxItems: 6 + nvmem-cell-names: + items: + - const: big_scale_calib1 + - const: big_scale_calib2 + - const: small_scale_calib1 + - const: small_scale_calib2 + - const: vbat_det_cal1 + - const: vbat_det_cal2 required: - compatible @@ -69,4 +96,25 @@ examples: nvmem-cell-names = "big_scale_calib", "small_scale_calib"; }; }; + + - | + #include + pmic { + #address-cells = <1>; + #size-cells = <0>; + adc@504 { + compatible = "sprd,ump9620-adc"; + reg = <0x504>; + interrupt-parent = <&ump9620_pmic>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + hwlocks = <&hwlock 4>; + nvmem-cells = <&adc_bcal1>, <&adc_bcal2>, + <&adc_scal1>, <&adc_scal2>, + <&vbat_det_cal1>, <&vbat_det_cal2>; + nvmem-cell-names = "big_scale_calib1", "big_scale_calib2", + "small_scale_calib1", "small_scale_calib2", + "vbat_det_cal1", "vbat_det_cal2"; + }; + }; ... diff --git a/dts/Bindings/iio/adc/ti,ads1015.yaml b/dts/Bindings/iio/adc/ti,ads1015.yaml index 2c2d01bbc2..a3b79438a1 100644 --- a/dts/Bindings/iio/adc/ti,ads1015.yaml +++ b/dts/Bindings/iio/adc/ti,ads1015.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/adc/ti,ads1015.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: TI ADS1015 4 channel I2C analog to digital converter +title: TI ADS1015/ADS1115 4 channel I2C analog to digital converter maintainers: - Daniel Baluta @@ -15,7 +15,10 @@ description: | properties: compatible: - const: ti,ads1015 + enum: + - ti,ads1015 + - ti,ads1115 + - ti,tla2024 reg: maxItems: 1 diff --git a/dts/Bindings/iio/dac/adi,ad3552r.yaml b/dts/Bindings/iio/dac/adi,ad3552r.yaml index 501a463e5d..9c48c76993 100644 --- a/dts/Bindings/iio/dac/adi,ad3552r.yaml +++ b/dts/Bindings/iio/dac/adi,ad3552r.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices AD2552R DAC device driver maintainers: - - Mihail Chindris + - Nuno Sá description: | Bindings for the Analog Devices AD3552R DAC device and similar. diff --git a/dts/Bindings/iio/dac/lltc,ltc1660.yaml b/dts/Bindings/iio/dac/lltc,ltc1660.yaml index e51a585bd5..133b0f8679 100644 --- a/dts/Bindings/iio/dac/lltc,ltc1660.yaml +++ b/dts/Bindings/iio/dac/lltc,ltc1660.yaml @@ -41,7 +41,7 @@ examples: spi { #address-cells = <1>; #size-cells = <0>; - + dac@0 { compatible = "lltc,ltc1660"; reg = <0>; diff --git a/dts/Bindings/iio/dac/lltc,ltc2632.yaml b/dts/Bindings/iio/dac/lltc,ltc2632.yaml index edf804d0ac..b1eb77335d 100644 --- a/dts/Bindings/iio/dac/lltc,ltc2632.yaml +++ b/dts/Bindings/iio/dac/lltc,ltc2632.yaml @@ -68,7 +68,7 @@ examples: #size-cells = <0>; dac@0 { - compatible = "lltc,ltc2632"; + compatible = "lltc,ltc2632-l12"; reg = <0>; /* CS0 */ spi-max-frequency = <1000000>; vref-supply = <&vref>; diff --git a/dts/Bindings/iio/imu/invensense,mpu6050.yaml b/dts/Bindings/iio/imu/invensense,mpu6050.yaml index d69595a524..3ebc6526d8 100644 --- a/dts/Bindings/iio/imu/invensense,mpu6050.yaml +++ b/dts/Bindings/iio/imu/invensense,mpu6050.yaml @@ -14,21 +14,25 @@ description: | properties: compatible: - enum: - - invensense,iam20680 - - invensense,icm20608 - - invensense,icm20609 - - invensense,icm20689 - - invensense,icm20602 - - invensense,icm20690 - - invensense,mpu6000 - - invensense,mpu6050 - - invensense,mpu6500 - - invensense,mpu6515 - - invensense,mpu6880 - - invensense,mpu9150 - - invensense,mpu9250 - - invensense,mpu9255 + oneOf: + - enum: + - invensense,iam20680 + - invensense,icm20608 + - invensense,icm20609 + - invensense,icm20689 + - invensense,icm20602 + - invensense,icm20690 + - invensense,mpu6000 + - invensense,mpu6050 + - invensense,mpu6500 + - invensense,mpu6515 + - invensense,mpu6880 + - invensense,mpu9150 + - invensense,mpu9250 + - invensense,mpu9255 + - items: + - const: invensense,icm20608d + - const: invensense,icm20608 reg: maxItems: 1 diff --git a/dts/Bindings/iio/imu/st,lsm6dsx.yaml b/dts/Bindings/iio/imu/st,lsm6dsx.yaml index 0750f700a1..5d4839f008 100644 --- a/dts/Bindings/iio/imu/st,lsm6dsx.yaml +++ b/dts/Bindings/iio/imu/st,lsm6dsx.yaml @@ -14,23 +14,27 @@ description: properties: compatible: - enum: - - st,lsm6ds3 - - st,lsm6ds3h - - st,lsm6dsl - - st,lsm6dsm - - st,ism330dlc - - st,lsm6dso - - st,asm330lhh - - st,lsm6dsox - - st,lsm6dsr - - st,lsm6ds3tr-c - - st,ism330dhcx - - st,lsm9ds1-imu - - st,lsm6ds0 - - st,lsm6dsrx - - st,lsm6dst - - st,lsm6dsop + oneOf: + - enum: + - st,lsm6ds3 + - st,lsm6ds3h + - st,lsm6dsl + - st,lsm6dsm + - st,ism330dlc + - st,lsm6dso + - st,asm330lhh + - st,lsm6dsox + - st,lsm6dsr + - st,lsm6ds3tr-c + - st,ism330dhcx + - st,lsm9ds1-imu + - st,lsm6ds0 + - st,lsm6dsrx + - st,lsm6dst + - st,lsm6dsop + - items: + - const: st,asm330lhhx + - const: st,lsm6dsr reg: maxItems: 1 diff --git a/dts/Bindings/iio/light/stk33xx.yaml b/dts/Bindings/iio/light/stk33xx.yaml index f92bf7b2b7..f6e22dc981 100644 --- a/dts/Bindings/iio/light/stk33xx.yaml +++ b/dts/Bindings/iio/light/stk33xx.yaml @@ -13,6 +13,9 @@ maintainers: description: | Ambient light and proximity sensor over an i2c interface. +allOf: + - $ref: ../common.yaml# + properties: compatible: enum: @@ -26,6 +29,8 @@ properties: interrupts: maxItems: 1 + proximity-near-level: true + required: - compatible - reg @@ -44,6 +49,7 @@ examples: stk3310@48 { compatible = "sensortek,stk3310"; reg = <0x48>; + proximity-near-level = <25>; interrupt-parent = <&gpio1>; interrupts = <5 IRQ_TYPE_LEVEL_LOW>; }; diff --git a/dts/Bindings/iio/potentiometer/microchip,mcp4131.yaml b/dts/Bindings/iio/potentiometer/microchip,mcp4131.yaml index 945a2d644d..32e92bced8 100644 --- a/dts/Bindings/iio/potentiometer/microchip,mcp4131.yaml +++ b/dts/Bindings/iio/potentiometer/microchip,mcp4131.yaml @@ -95,7 +95,7 @@ examples: #size-cells = <0>; potentiometer@0 { - compatible = "mcp4131-502"; + compatible = "microchip,mcp4131-502"; reg = <0>; spi-max-frequency = <500000>; }; diff --git a/dts/Bindings/iio/st,st-sensors.yaml b/dts/Bindings/iio/st,st-sensors.yaml index 9735a20482..fcb2902683 100644 --- a/dts/Bindings/iio/st,st-sensors.yaml +++ b/dts/Bindings/iio/st,st-sensors.yaml @@ -29,6 +29,7 @@ properties: - st,lis2dw12 - st,lis2hh12 - st,lis2dh12-accel + - st,lis302dl - st,lis331dl-accel - st,lis331dlh-accel - st,lis3de diff --git a/dts/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/dts/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index d74f200240..3399fc288a 100644 --- a/dts/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/dts/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -18,10 +18,20 @@ properties: - items: - const: allwinner,sun50i-a64-lradc - const: allwinner,sun8i-a83t-r-lradc + - const: allwinner,sun50i-r329-lradc + - items: + - const: allwinner,sun20i-d1-lradc + - const: allwinner,sun50i-r329-lradc reg: maxItems: 1 + clocks: + maxItems: 1 + + resets: + maxItems: 1 + interrupts: maxItems: 1 @@ -68,6 +78,18 @@ required: - interrupts - vref-supply +if: + properties: + compatible: + contains: + enum: + - allwinner,sun50i-r329-lradc + +then: + required: + - clocks + - resets + additionalProperties: false examples: diff --git a/dts/Bindings/input/azoteq,iqs7222.yaml b/dts/Bindings/input/azoteq,iqs7222.yaml new file mode 100644 index 0000000000..a3a1e5a653 --- /dev/null +++ b/dts/Bindings/input/azoteq,iqs7222.yaml @@ -0,0 +1,960 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/azoteq,iqs7222.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS7222A/B/C Capacitive Touch Controller + +maintainers: + - Jeff LaBundy + +description: | + The Azoteq IQS7222A, IQS7222B and IQS7222C are multichannel capacitive touch + controllers that feature additional sensing capabilities. + + Link to datasheets: https://www.azoteq.com/ + +properties: + compatible: + enum: + - azoteq,iqs7222a + - azoteq,iqs7222b + - azoteq,iqs7222c + + reg: + maxItems: 1 + + irq-gpios: + maxItems: 1 + description: + Specifies the GPIO connected to the device's active-low RDY output. + + reset-gpios: + maxItems: 1 + description: + Specifies the GPIO connected to the device's active-low MCLR input. The + device is temporarily held in hardware reset prior to initialization if + this property is present. + + azoteq,rf-filt-enable: + type: boolean + description: Enables the device's internal RF filter. + + azoteq,max-counts: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the maximum number of conversion periods (counts) that can be + reported as follows: + 0: 1023 + 1: 2047 + 2: 4095 + 3: 16384 + + azoteq,auto-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the number of conversions to occur before an interrupt is + generated as follows: + 0: 4 + 1: 8 + 2: 16 + 3: 32 + + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the preloaded ATI fine fractional divider. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the preloaded ATI coarse fractional divider. + + azoteq,ati-comp-select: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1023 + description: Specifies the preloaded ATI compensation selection. + + azoteq,lta-beta-lp: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter damping factor to be applied during + low-power mode. + + azoteq,lta-beta-np: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter damping factor to be applied during + normal-power mode. + + azoteq,counts-beta-lp: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the counts filter damping factor to be applied during low-power + mode. + + azoteq,counts-beta-np: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the counts filter damping factor to be applied during normal- + power mode. + + azoteq,lta-fast-beta-lp: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter fast damping factor to be applied + during low-power mode. + + azoteq,lta-fast-beta-np: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter fast damping factor to be applied + during normal-power mode. + + azoteq,timeout-ati-ms: + multipleOf: 500 + minimum: 0 + maximum: 32767500 + description: + Specifies the delay (in ms) before ATI is retried following an ATI error. + + azoteq,rate-ati-ms: + minimum: 0 + maximum: 65535 + description: Specifies the rate (in ms) at which ATI status is evaluated. + + azoteq,timeout-np-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the length of time (in ms) to wait for an event before moving + from normal-power mode to low-power mode. + + azoteq,rate-np-ms: + minimum: 0 + maximum: 3000 + description: Specifies the report rate (in ms) during normal-power mode. + + azoteq,timeout-lp-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the length of time (in ms) to wait for an event before moving + from low-power mode to ultra-low-power mode. + + azoteq,rate-lp-ms: + minimum: 0 + maximum: 3000 + description: Specifies the report rate (in ms) during low-power mode. + + azoteq,timeout-ulp-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the rate (in ms) at which channels not regularly sampled during + ultra-low-power mode are updated. + + azoteq,rate-ulp-ms: + minimum: 0 + maximum: 3000 + description: Specifies the report rate (in ms) during ultra-low-power mode. + +patternProperties: + "^cycle-[0-9]$": + type: object + description: Represents a conversion cycle serving two sensing channels. + + properties: + azoteq,conv-period: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the cycle's conversion period. + + azoteq,conv-frac: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the cycle's conversion frequency fraction. + + azoteq,tx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 9 + items: + minimum: 0 + maximum: 8 + description: Specifies the CTx pin(s) associated with the cycle. + + azoteq,rx-float-inactive: + type: boolean + description: Floats any inactive CRx pins instead of grounding them. + + azoteq,dead-time-enable: + type: boolean + description: + Increases the denominator of the conversion frequency formula by one. + + azoteq,tx-freq-fosc: + type: boolean + description: + Fixes the conversion frequency to that of the device's core clock. + + azoteq,vbias-enable: + type: boolean + description: Enables the bias voltage for use during inductive sensing. + + azoteq,sense-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the cycle's sensing mode as follows: + 0: None + 1: Self capacitive + 2: Mutual capacitive + 3: Inductive + + Note that in the case of IQS7222A, cycles 5 and 6 are restricted to + Hall-effect sensing. + + azoteq,iref-enable: + type: boolean + description: + Enables the current reference for use during various sensing modes. + + azoteq,iref-level: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the cycle's current reference level. + + azoteq,iref-trim: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the cycle's current reference trim. + + dependencies: + azoteq,iref-level: ["azoteq,iref-enable"] + azoteq,iref-trim: ["azoteq,iref-enable"] + + additionalProperties: false + + "^channel-([0-9]|1[0-9])$": + type: object + description: + Represents a single sensing channel. A channel is active if defined and + inactive otherwise. + + Note that in the case of IQS7222A, channels 10 and 11 are restricted to + Hall-effect sensing with events reported on channel 10 only. + + properties: + azoteq,ulp-allow: + type: boolean + description: + Permits the device to enter ultra-low-power mode while the channel + lies in a state of touch or proximity. + + azoteq,ref-select: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 9 + description: Specifies a separate reference channel to be followed. + + azoteq,ref-weight: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the relative weight of the reference channel. + + azoteq,use-prox: + type: boolean + description: + Activates the reference channel in response to proximity events + instead of touch events. + + azoteq,ati-band: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the channel's ATI band as a fraction of its ATI target as + follows: + 0: 1/16 + 1: 1/8 + 2: 1/4 + 3: 1/2 + + azoteq,global-halt: + type: boolean + description: + Specifies that the channel's long-term average is to freeze if any + other participating channel lies in a proximity or touch state. + + azoteq,invert-enable: + type: boolean + description: + Inverts the polarity of the states reported for proximity and touch + events relative to their respective thresholds. + + azoteq,dual-direction: + type: boolean + description: + Specifies that the channel's long-term average is to freeze in the + presence of either increasing or decreasing counts, thereby permit- + ting events to be reported in either direction. + + azoteq,rx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + minimum: 0 + maximum: 7 + description: Specifies the CRx pin(s) associated with the channel. + + azoteq,samp-cap-double: + type: boolean + description: Doubles the sampling capacitance from 40 pF to 80 pF. + + azoteq,vref-half: + type: boolean + description: Halves the discharge threshold from 1.0 V to 0.5 V. + + azoteq,proj-bias: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the bias current applied during mutual (projected) + capacitive sensing as follows: + 0: 2 uA + 1: 5 uA + 2: 7 uA + 3: 10 uA + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 8 + minimum: 0 + maximum: 2040 + description: Specifies the channel's ATI target. + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 16 + minimum: 0 + maximum: 496 + description: Specifies the channel's ATI base. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5] + description: | + Specifies the channel's ATI mode as follows: + 0: Disabled + 1: Compensation + 2: Compensation divider + 3: Fine fractional divider + 4: Coarse fractional divider + 5: Full + + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the channel's ATI fine fractional divider. + + azoteq,ati-frac-mult-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the channel's ATI coarse fractional multiplier. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the channel's ATI coarse fractional divider. + + azoteq,ati-comp-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the channel's ATI compensation divider. + + azoteq,ati-comp-select: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1023 + description: Specifies the channel's ATI compensation selection. + + azoteq,debounce-enter: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the channel's debounce entrance factor. + + azoteq,debounce-exit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the channel's debounce exit factor. + + patternProperties: + "^event-(prox|touch)$": + type: object + description: + Represents a proximity or touch event reported by the channel. + + properties: + azoteq,gpio-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 2 + description: | + Specifies one or more GPIO mapped to the event as follows: + 0: GPIO0 + 1: GPIO3 (IQS7222C only) + 2: GPIO4 (IQS7222C only) + + Note that although multiple events can be mapped to a single + GPIO, they must all be of the same type (proximity, touch or + slider gesture). + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the threshold for the event. Valid entries range from + 0-127 and 0-255 for proximity and touch events, respectively. + + azoteq,hyst: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: + Specifies the hysteresis for the event (touch events only). + + azoteq,timeout-press-ms: + multipleOf: 500 + minimum: 0 + maximum: 127500 + description: + Specifies the length of time (in ms) to wait before automatically + releasing a press event. Specify zero to allow the press state to + persist indefinitely. + + The IQS7222B does not feature channel-specific timeouts; the time- + out specified for any one channel applies to all channels. + + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Numeric key or switch code associated with the event. Specify + KEY_RESERVED (0) to opt out of event reporting. + + linux,input-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 5] + default: 1 + description: + Specifies whether the event is to be interpreted as a key (1) + or a switch (5). + + required: + - linux,code + + additionalProperties: false + + dependencies: + azoteq,ref-weight: ["azoteq,ref-select"] + azoteq,use-prox: ["azoteq,ref-select"] + + additionalProperties: false + + "^slider-[0-1]$": + type: object + description: Represents a slider comprising three or four channels. + + properties: + azoteq,channel-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 4 + items: + minimum: 0 + maximum: 9 + description: + Specifies the order of the channels that participate in the slider. + + azoteq,slider-size: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the slider's one-dimensional resolution, equal to the + maximum coordinate plus one. + + azoteq,lower-cal: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the slider's lower starting point. + + azoteq,upper-cal: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the slider's upper starting point. + + azoteq,top-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the speed of movement after which coordinate filtering is + no longer applied. + + azoteq,bottom-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 4 + minimum: 0 + maximum: 1020 + description: + Specifies the speed of movement after which coordinate filtering is + linearly reduced. + + azoteq,bottom-beta: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + description: + Specifies the coordinate filter damping factor to be applied + while the speed of movement is below that which is specified + by azoteq,bottom-speed. + + azoteq,static-beta: + type: boolean + description: + Applies the coordinate filter damping factor specified by + azoteq,bottom-beta regardless of the speed of movement. + + azoteq,use-prox: + type: boolean + description: + Directs the slider to respond to the proximity states of the selected + channels instead of their corresponding touch states. Note the slider + cannot report granular coordinates during a state of proximity. + + linux,axis: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the absolute axis to which coordinates are mapped. Specify + ABS_WHEEL to operate the slider as a wheel (IQS7222C only). + + patternProperties: + "^event-(press|tap|(swipe|flick)-(pos|neg))$": + type: object + description: + Represents a press or gesture (IQS7222A only) event reported by + the slider. + + properties: + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Numeric key code associated with the event. + + azoteq,gesture-max-ms: + multipleOf: 4 + minimum: 0 + maximum: 1020 + description: + Specifies the length of time (in ms) within which a tap, swipe + or flick gesture must be completed in order to be acknowledged + by the device. The number specified for any one swipe or flick + gesture applies to all remaining swipe or flick gestures. + + azoteq,gesture-min-ms: + multipleOf: 4 + minimum: 0 + maximum: 124 + description: + Specifies the length of time (in ms) for which a tap gesture must + be held in order to be acknowledged by the device. + + azoteq,gesture-dist: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 16 + minimum: 0 + maximum: 4080 + description: + Specifies the distance across which a swipe or flick gesture must + travel in order to be acknowledged by the device. The number spec- + ified for any one swipe or flick gesture applies to all remaining + swipe or flick gestures. + + azoteq,gpio-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 1 + items: + minimum: 0 + maximum: 0 + description: | + Specifies an individual GPIO mapped to a tap, swipe or flick + gesture as follows: + 0: GPIO0 + 1: GPIO3 (reserved) + 2: GPIO4 (reserved) + + Note that although multiple events can be mapped to a single + GPIO, they must all be of the same type (proximity, touch or + slider gesture). + + required: + - linux,code + + additionalProperties: false + + required: + - azoteq,channel-select + + additionalProperties: false + + "^gpio-[0-2]$": + type: object + description: | + Represents a GPIO mapped to one or more events as follows: + gpio-0: GPIO0 + gpio-1: GPIO3 (IQS7222C only) + gpio-2: GPIO4 (IQS7222C only) + + allOf: + - $ref: ../pinctrl/pincfg-node.yaml# + + properties: + drive-open-drain: true + + additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: azoteq,iqs7222b + + then: + patternProperties: + "^cycle-[0-9]$": + properties: + azoteq,iref-enable: false + + "^channel-([0-9]|1[0-9])$": + properties: + azoteq,ref-select: false + + patternProperties: + "^event-(prox|touch)$": + properties: + azoteq,gpio-select: false + + "^slider-[0-1]$": false + + "^gpio-[0-2]$": false + + - if: + properties: + compatible: + contains: + const: azoteq,iqs7222a + + then: + patternProperties: + "^channel-([0-9]|1[0-9])$": + patternProperties: + "^event-(prox|touch)$": + properties: + azoteq,gpio-select: + maxItems: 1 + items: + maximum: 0 + + "^slider-[0-1]$": + properties: + azoteq,slider-size: + multipleOf: 16 + maximum: 4080 + + azoteq,top-speed: + multipleOf: 4 + maximum: 1020 + + else: + patternProperties: + "^channel-([0-9]|1[0-9])$": + properties: + azoteq,ulp-allow: false + + "^slider-[0-1]$": + patternProperties: + "^event-(press|tap|(swipe|flick)-(pos|neg))$": + properties: + azoteq,gesture-max-ms: false + + azoteq,gesture-min-ms: false + + azoteq,gesture-dist: false + + azoteq,gpio-select: false + +required: + - compatible + - reg + - irq-gpios + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + iqs7222a@44 { + compatible = "azoteq,iqs7222a"; + reg = <0x44>; + irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + azoteq,lta-beta-lp = <7>; + azoteq,lta-beta-np = <8>; + azoteq,counts-beta-lp = <2>; + azoteq,counts-beta-np = <3>; + azoteq,lta-fast-beta-lp = <3>; + azoteq,lta-fast-beta-np = <4>; + + cycle-0 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <1>, <2>, <4>, <5>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-1 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <5>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-2 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <4>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-3 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <2>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-4 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <1>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-5 { + azoteq,conv-period = <2>; + azoteq,conv-frac = <0>; + }; + + cycle-6 { + azoteq,conv-period = <2>; + azoteq,conv-frac = <0>; + }; + + channel-0 { + azoteq,ulp-allow; + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <800>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-1 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-2 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-3 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-4 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-5 { + azoteq,ulp-allow; + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <800>; + azoteq,ati-base = <144>; + azoteq,ati-mode = <5>; + }; + + channel-6 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = ; + }; + }; + + channel-7 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = ; + }; + }; + + channel-8 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = ; + }; + }; + + channel-9 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = ; + }; + }; + + channel-10 { + azoteq,ulp-allow; + azoteq,ati-target = <496>; + azoteq,ati-base = <112>; + + event-touch { + linux,code = ; + linux,input-type = ; + }; + }; + + channel-11 { + azoteq,ati-target = <496>; + azoteq,ati-base = <112>; + }; + + slider-0 { + azoteq,channel-select = <1>, <2>, <3>, <4>; + azoteq,slider-size = <4080>; + azoteq,upper-cal = <50>; + azoteq,lower-cal = <30>; + azoteq,top-speed = <200>; + azoteq,bottom-speed = <1>; + azoteq,bottom-beta = <3>; + + event-tap { + linux,code = ; + azoteq,gesture-max-ms = <600>; + azoteq,gesture-min-ms = <24>; + }; + + event-flick-pos { + linux,code = ; + azoteq,gesture-max-ms = <600>; + azoteq,gesture-dist = <816>; + }; + + event-flick-neg { + linux,code = ; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/input/google,cros-ec-keyb.yaml b/dts/Bindings/input/google,cros-ec-keyb.yaml index e8f137abb0..e05690b3e9 100644 --- a/dts/Bindings/input/google,cros-ec-keyb.yaml +++ b/dts/Bindings/input/google,cros-ec-keyb.yaml @@ -15,14 +15,16 @@ description: | Google's ChromeOS EC Keyboard is a simple matrix keyboard implemented on a separate EC (Embedded Controller) device. It provides a message for reading key scans from the EC. These are then converted - into keycodes for processing by the kernel. - -allOf: - - $ref: "/schemas/input/matrix-keymap.yaml#" + into keycodes for processing by the kernel. This device also supports + switches/buttons like power and volume buttons. properties: compatible: - const: google,cros-ec-keyb + oneOf: + - description: ChromeOS EC with only buttons/switches + const: google,cros-ec-keyb-switches + - description: ChromeOS EC with keyboard and possibly buttons/switches + const: google,cros-ec-keyb google,needs-ghost-filter: description: @@ -31,6 +33,7 @@ properties: type: boolean function-row-physmap: + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 15 description: | @@ -41,15 +44,31 @@ properties: where the lower 16 bits are reserved. This property is specified only when the keyboard has a custom design for the top row keys. +dependencies: + function-row-phsymap: [ 'linux,keymap' ] + google,needs-ghost-filter: [ 'linux,keymap' ] + required: - compatible +if: + properties: + compatible: + contains: + const: google,cros-ec-keyb +then: + $ref: "/schemas/input/matrix-keymap.yaml#" + required: + - keypad,num-rows + - keypad,num-columns + - linux,keymap + unevaluatedProperties: false examples: - | #include - cros-ec-keyb { + keyboard-controller { compatible = "google,cros-ec-keyb"; keypad,num-rows = <8>; keypad,num-columns = <13>; @@ -113,3 +132,9 @@ examples: /* UP LEFT */ 0x070b0067 0x070c0069>; }; + - | + /* No matrix keyboard, just buttons/switches */ + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +... diff --git a/dts/Bindings/input/ilitek,ili2xxx.txt b/dts/Bindings/input/ilitek,ili2xxx.txt deleted file mode 100644 index cdcaa3f52d..0000000000 --- a/dts/Bindings/input/ilitek,ili2xxx.txt +++ /dev/null @@ -1,27 +0,0 @@ -Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller - -Required properties: -- compatible: - ilitek,ili210x for ILI210x - ilitek,ili2117 for ILI2117 - ilitek,ili2120 for ILI2120 - ilitek,ili251x for ILI251x - -- reg: The I2C address of the device - -- interrupts: The sink for the touchscreen's IRQ output - See ../interrupt-controller/interrupts.txt - -Optional properties for main touchpad device: - -- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low) - -Example: - - touchscreen@41 { - compatible = "ilitek,ili251x"; - reg = <0x41>; - interrupt-parent = <&gpio4>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; - }; diff --git a/dts/Bindings/input/touchscreen/ilitek_ts_i2c.yaml b/dts/Bindings/input/touchscreen/ilitek_ts_i2c.yaml index a190e7baac..9f73289997 100644 --- a/dts/Bindings/input/touchscreen/ilitek_ts_i2c.yaml +++ b/dts/Bindings/input/touchscreen/ilitek_ts_i2c.yaml @@ -15,6 +15,9 @@ allOf: properties: compatible: enum: + - ilitek,ili210x + - ilitek,ili2117 + - ilitek,ili2120 - ilitek,ili2130 - ilitek,ili2131 - ilitek,ili2132 @@ -22,11 +25,12 @@ properties: - ilitek,ili2322 - ilitek,ili2323 - ilitek,ili2326 + - ilitek,ili251x - ilitek,ili2520 - ilitek,ili2521 reg: - const: 0x41 + maxItems: 1 interrupts: maxItems: 1 @@ -50,7 +54,6 @@ required: - compatible - reg - interrupts - - reset-gpios examples: - | diff --git a/dts/Bindings/interconnect/qcom,bcm-voter.yaml b/dts/Bindings/interconnect/qcom,bcm-voter.yaml index e23df4836c..eec987640b 100644 --- a/dts/Bindings/interconnect/qcom,bcm-voter.yaml +++ b/dts/Bindings/interconnect/qcom,bcm-voter.yaml @@ -45,20 +45,20 @@ additionalProperties: false examples: # Example 1: apps bcm_voter on SDM845 SoC should be defined inside &apps_rsc node - # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt + # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml - | - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; # Example 2: disp bcm_voter on SDM845 should be defined inside &disp_rsc node - # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt + # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml - | #include - disp_bcm_voter: bcm_voter { + disp_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; qcom,tcs-wait = ; }; diff --git a/dts/Bindings/interconnect/qcom,osm-l3.yaml b/dts/Bindings/interconnect/qcom,osm-l3.yaml index 116e434d0d..bf538c0c5a 100644 --- a/dts/Bindings/interconnect/qcom,osm-l3.yaml +++ b/dts/Bindings/interconnect/qcom,osm-l3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Operating State Manager (OSM) L3 Interconnect Provider maintainers: - - Sibi Sankar + - Sibi Sankar description: L3 cache bandwidth requirements on Qualcomm SoCs is serviced by the OSM. diff --git a/dts/Bindings/interconnect/qcom,rpmh.yaml b/dts/Bindings/interconnect/qcom,rpmh.yaml index 5a911be0c2..28b3516aa0 100644 --- a/dts/Bindings/interconnect/qcom,rpmh.yaml +++ b/dts/Bindings/interconnect/qcom,rpmh.yaml @@ -31,7 +31,6 @@ properties: - qcom,sc7180-config-noc - qcom,sc7180-dc-noc - qcom,sc7180-gem-noc - - qcom,sc7180-ipa-virt - qcom,sc7180-mc-virt - qcom,sc7180-mmss-noc - qcom,sc7180-npu-noc @@ -59,7 +58,20 @@ properties: - qcom,sc8180x-ipa-virt - qcom,sc8180x-mc-virt - qcom,sc8180x-mmss-noc + - qcom,sc8180x-qup-virt - qcom,sc8180x-system-noc + - qcom,sc8280xp-aggre1-noc + - qcom,sc8280xp-aggre2-noc + - qcom,sc8280xp-clk-virt + - qcom,sc8280xp-config-noc + - qcom,sc8280xp-dc-noc + - qcom,sc8280xp-gem-noc + - qcom,sc8280xp-lpass-ag-noc + - qcom,sc8280xp-mc-virt + - qcom,sc8280xp-mmss-noc + - qcom,sc8280xp-nspa-noc + - qcom,sc8280xp-nspb-noc + - qcom,sc8280xp-system-noc - qcom,sdm845-aggre1-noc - qcom,sdm845-aggre2-noc - qcom,sdm845-config-noc @@ -68,10 +80,12 @@ properties: - qcom,sdm845-mem-noc - qcom,sdm845-mmss-noc - qcom,sdm845-system-noc - - qcom,sdx55-ipa-virt - qcom,sdx55-mc-virt - qcom,sdx55-mem-noc - qcom,sdx55-system-noc + - qcom,sdx65-mc-virt + - qcom,sdx65-mem-noc + - qcom,sdx65-system-noc - qcom,sm8150-aggre1-noc - qcom,sm8150-aggre2-noc - qcom,sm8150-camnoc-noc diff --git a/dts/Bindings/interrupt-controller/arm,gic-v3.yaml b/dts/Bindings/interrupt-controller/arm,gic-v3.yaml index b7197f78e1..3912a89162 100644 --- a/dts/Bindings/interrupt-controller/arm,gic-v3.yaml +++ b/dts/Bindings/interrupt-controller/arm,gic-v3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Generic Interrupt Controller, version 3 maintainers: - - Marc Zyngier + - Marc Zyngier description: | AArch64 SMP cores are often associated with a GICv3, providing Private @@ -78,7 +78,11 @@ properties: - GIC Hypervisor interface (GICH) - GIC Virtual CPU interface (GICV) - GICC, GICH and GICV are optional. + GICC, GICH and GICV are optional, but must be described if the CPUs + support them. Examples of such CPUs are ARM's implementations of the + ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and + A73 (this list is not exhaustive). + minItems: 2 maxItems: 4096 # Should be enough? diff --git a/dts/Bindings/interrupt-controller/fsl,ls-extirq.txt b/dts/Bindings/interrupt-controller/fsl,ls-extirq.txt deleted file mode 100644 index 4d47df1a5c..0000000000 --- a/dts/Bindings/interrupt-controller/fsl,ls-extirq.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Freescale Layerscape external IRQs - -Some Layerscape SOCs (LS1021A, LS1043A, LS1046A -LS1088A, LS208xA, LX216xA) support inverting -the polarity of certain external interrupt lines. - -The device node must be a child of the node representing the -Supplemental Configuration Unit (SCFG). - -Required properties: -- compatible: should be "fsl,-extirq", e.g. "fsl,ls1021a-extirq". - "fsl,ls1043a-extirq": for LS1043A, LS1046A. - "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA. -- #interrupt-cells: Must be 2. The first element is the index of the - external interrupt line. The second element is the trigger type. -- #address-cells: Must be 0. -- interrupt-controller: Identifies the node as an interrupt controller -- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in - the SCFG or the External Interrupt Control Register (IRQCR) in - the ISC. -- interrupt-map: Specifies the mapping from external interrupts to GIC - interrupts. -- interrupt-map-mask: Must be <0xffffffff 0>. - -Example: - scfg: scfg@1570000 { - compatible = "fsl,ls1021a-scfg", "syscon"; - reg = <0x0 0x1570000 0x0 0x10000>; - big-endian; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x1570000 0x10000>; - - extirq: interrupt-controller@1ac { - compatible = "fsl,ls1021a-extirq"; - #interrupt-cells = <2>; - #address-cells = <0>; - interrupt-controller; - reg = <0x1ac 4>; - interrupt-map = - <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, - <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, - <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, - <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; - }; - }; - - - interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <&extirq 1 IRQ_TYPE_LEVEL_LOW>; diff --git a/dts/Bindings/interrupt-controller/fsl,ls-extirq.yaml b/dts/Bindings/interrupt-controller/fsl,ls-extirq.yaml new file mode 100644 index 0000000000..887e565b95 --- /dev/null +++ b/dts/Bindings/interrupt-controller/fsl,ls-extirq.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-extirq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape External Interrupt Controller + +maintainers: + - Shawn Guo + - Li Yang + +description: | + Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA, + LX216xA) support inverting the polarity of certain external interrupt + lines. + +properties: + compatible: + oneOf: + - enum: + - fsl,ls1021a-extirq + - fsl,ls1043a-extirq + - fsl,ls1088a-extirq + - items: + - enum: + - fsl,ls1046a-extirq + - const: fsl,ls1043a-extirq + - items: + - enum: + - fsl,ls2080a-extirq + - fsl,lx2160a-extirq + - const: fsl,ls1088a-extirq + + '#interrupt-cells': + const: 2 + + '#address-cells': + const: 0 + + interrupt-controller: true + + reg: + maxItems: 1 + description: + Specifies the Interrupt Polarity Control Register (INTPCR) in the + SCFG or the External Interrupt Control Register (IRQCR) in the ISC. + + interrupt-map: + description: Specifies the mapping from external interrupts to GIC interrupts. + + interrupt-map-mask: true + +required: + - compatible + - '#interrupt-cells' + - '#address-cells' + - interrupt-controller + - reg + - interrupt-map + - interrupt-map-mask + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,ls1021a-extirq + then: + properties: + interrupt-map: + minItems: 6 + maxItems: 6 + interrupt-map-mask: + items: + - const: 0x7 + - const: 0 + - if: + properties: + compatible: + contains: + enum: + - fsl,ls1043a-extirq + - fsl,ls1046a-extirq + - fsl,ls1088a-extirq + - fsl,ls2080a-extirq + - fsl,lx2160a-extirq + then: + properties: + interrupt-map: + minItems: 12 + maxItems: 12 + interrupt-map-mask: + items: + - const: 0xf + - const: 0 + +additionalProperties: false + +examples: + - | + #include + interrupt-controller@1ac { + compatible = "fsl,ls1021a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1ac 4>; + interrupt-map = + <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0x7 0x0>; + }; diff --git a/dts/Bindings/interrupt-controller/qcom,pdc.txt b/dts/Bindings/interrupt-controller/qcom,pdc.txt index 98d89e5301..159a423e55 100644 --- a/dts/Bindings/interrupt-controller/qcom,pdc.txt +++ b/dts/Bindings/interrupt-controller/qcom,pdc.txt @@ -21,8 +21,10 @@ Properties: - "qcom,sc7180-pdc": For SC7180 - "qcom,sc7280-pdc": For SC7280 - "qcom,sdm845-pdc": For SDM845 - - "qcom,sdm8250-pdc": For SM8250 - - "qcom,sdm8350-pdc": For SM8350 + - "qcom,sm6350-pdc": For SM6350 + - "qcom,sm8150-pdc": For SM8150 + - "qcom,sm8250-pdc": For SM8250 + - "qcom,sm8350-pdc": For SM8350 - reg: Usage: required diff --git a/dts/Bindings/interrupt-controller/renesas,h8300h-intc.txt b/dts/Bindings/interrupt-controller/renesas,h8300h-intc.txt deleted file mode 100644 index 56e8d82aff..0000000000 --- a/dts/Bindings/interrupt-controller/renesas,h8300h-intc.txt +++ /dev/null @@ -1,22 +0,0 @@ -* H8/300H Interrupt controller - -Required properties: - -- compatible: has to be "renesas,h8300h-intc", "renesas,h8300-intc" as fallback. -- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in - interrupts.txt in this directory -- regs: Base address of interrupt controller registers. - -Optional properties: - -- any properties, listed in interrupts.txt, and any standard resource allocation - properties - -Example: - - h8intc: interrupt-controller@fee012 { - compatible = "renesas,h8300h-intc", "renesas,h8300-intc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0xfee012 7>; - }; diff --git a/dts/Bindings/interrupt-controller/renesas,h8s-intc.txt b/dts/Bindings/interrupt-controller/renesas,h8s-intc.txt deleted file mode 100644 index faded2b155..0000000000 --- a/dts/Bindings/interrupt-controller/renesas,h8s-intc.txt +++ /dev/null @@ -1,22 +0,0 @@ -* H8S Interrupt controller - -Required properties: - -- compatible: has to be "renesas,h8s-intc", "renesas,h8300-intc" as fallback. -- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in - interrupts.txt in this directory -- regs: Base address of interrupt controller registers. - -Optional properties: - -- any properties, listed in interrupts.txt, and any standard resource allocation - properties - -Example: - - h8intc: interrupt-controller@fffe00 { - compatible = "renesas,h8s-intc", "renesas,h8300-intc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0xfffe00 24>; - }; diff --git a/dts/Bindings/iommu/apple,sart.yaml b/dts/Bindings/iommu/apple,sart.yaml new file mode 100644 index 0000000000..1524fa3094 --- /dev/null +++ b/dts/Bindings/iommu/apple,sart.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/apple,sart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SART DMA address filter + +maintainers: + - Sven Peter + +description: + Apple SART is a simple address filter for DMA transactions. Regions of + physical memory must be added to the SART's allow list before any + DMA can target these. Unlike a proper IOMMU no remapping can be done and + special support in the consumer driver is required since not all DMA + transactions of a single device are subject to SART filtering. + + SART1 has first been used since at least the A11 (iPhone 8 and iPhone X) + and allows 36 bit of physical address space and filter entries with sizes + up to 24 bit. + + SART2, first seen in A14 and M1, allows 36 bit of physical address space + and filter entry size up to 36 bit. + + SART3, first seen in M1 Pro/Max, extends both the address space and filter + entry size to 42 bit. + +properties: + compatible: + enum: + - apple,t6000-sart + - apple,t8103-sart + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + iommu@7bc50000 { + compatible = "apple,t8103-sart"; + reg = <0x7bc50000 0x4000>; + }; diff --git a/dts/Bindings/iommu/arm,smmu-v3.yaml b/dts/Bindings/iommu/arm,smmu-v3.yaml index e87bfbcc69..c57a53d87e 100644 --- a/dts/Bindings/iommu/arm,smmu-v3.yaml +++ b/dts/Bindings/iommu/arm,smmu-v3.yaml @@ -37,12 +37,18 @@ properties: hardware supports just a single, combined interrupt line. If provided, then the combined interrupt will be used in preference to any others. - - minItems: 2 + - minItems: 1 items: - - const: eventq # Event Queue not empty - - const: gerror # Global Error activated - - const: priq # PRI Queue not empty - - const: cmdq-sync # CMD_SYNC complete + - enum: + - eventq # Event Queue not empty + - gerror # Global Error activated + - const: gerror + - enum: + - cmdq-sync # CMD_SYNC complete + - priq # PRI Queue not empty + - enum: + - cmdq-sync + - priq '#iommu-cells': const: 1 diff --git a/dts/Bindings/iommu/arm,smmu.yaml b/dts/Bindings/iommu/arm,smmu.yaml index da5381c8ee..76fc2c0f4d 100644 --- a/dts/Bindings/iommu/arm,smmu.yaml +++ b/dts/Bindings/iommu/arm,smmu.yaml @@ -37,8 +37,10 @@ properties: - qcom,sc7180-smmu-500 - qcom,sc7280-smmu-500 - qcom,sc8180x-smmu-500 + - qcom,sc8280xp-smmu-500 - qcom,sdm845-smmu-500 - qcom,sdx55-smmu-500 + - qcom,sdx65-smmu-500 - qcom,sm6350-smmu-500 - qcom,sm8150-smmu-500 - qcom,sm8250-smmu-500 @@ -62,8 +64,9 @@ properties: for improved performance. items: - enum: - - nvidia,tegra194-smmu - nvidia,tegra186-smmu + - nvidia,tegra194-smmu + - nvidia,tegra234-smmu - const: nvidia,smmu-500 - items: - const: arm,mmu-500 @@ -157,6 +160,17 @@ properties: power-domains: maxItems: 1 + nvidia,memory-controller: + description: | + A phandle to the memory controller on NVIDIA Tegra186 and later SoCs. + The memory controller needs to be programmed with a mapping of memory + client IDs to ARM SMMU stream IDs. + + If this property is absent, the mapping programmed by early firmware + will be used and it is not guaranteed that IOMMU translations will be + enabled for any given device. + $ref: /schemas/types.yaml#/definitions/phandle + required: - compatible - reg @@ -172,13 +186,20 @@ allOf: compatible: contains: enum: - - nvidia,tegra194-smmu - nvidia,tegra186-smmu + - nvidia,tegra194-smmu + - nvidia,tegra234-smmu then: properties: reg: minItems: 1 maxItems: 2 + + # The reference to the memory controller is required to ensure that the + # memory client to stream ID mapping can be done synchronously with the + # IOMMU attachment. + required: + - nvidia,memory-controller else: properties: reg: diff --git a/dts/Bindings/iommu/mediatek,iommu.yaml b/dts/Bindings/iommu/mediatek,iommu.yaml index 97e8c471a5..2ae3bbad7f 100644 --- a/dts/Bindings/iommu/mediatek,iommu.yaml +++ b/dts/Bindings/iommu/mediatek,iommu.yaml @@ -76,7 +76,11 @@ properties: - mediatek,mt8167-m4u # generation two - mediatek,mt8173-m4u # generation two - mediatek,mt8183-m4u # generation two + - mediatek,mt8186-iommu-mm # generation two - mediatek,mt8192-m4u # generation two + - mediatek,mt8195-iommu-vdo # generation two + - mediatek,mt8195-iommu-vpp # generation two + - mediatek,mt8195-iommu-infra # generation two - description: mt7623 generation one items: @@ -119,7 +123,9 @@ properties: dt-binding/memory/mt8167-larb-port.h for mt8167, dt-binding/memory/mt8173-larb-port.h for mt8173, dt-binding/memory/mt8183-larb-port.h for mt8183, + dt-binding/memory/mt8186-memory-port.h for mt8186, dt-binding/memory/mt8192-larb-port.h for mt8192. + dt-binding/memory/mt8195-memory-port.h for mt8195. power-domains: maxItems: 1 @@ -128,7 +134,6 @@ required: - compatible - reg - interrupts - - mediatek,larbs - '#iommu-cells' allOf: @@ -140,7 +145,10 @@ allOf: - mediatek,mt2701-m4u - mediatek,mt2712-m4u - mediatek,mt8173-m4u + - mediatek,mt8186-iommu-mm - mediatek,mt8192-m4u + - mediatek,mt8195-iommu-vdo + - mediatek,mt8195-iommu-vpp then: required: @@ -150,12 +158,26 @@ allOf: properties: compatible: enum: + - mediatek,mt8186-iommu-mm - mediatek,mt8192-m4u + - mediatek,mt8195-iommu-vdo + - mediatek,mt8195-iommu-vpp then: required: - power-domains + - if: # The IOMMUs don't have larbs. + not: + properties: + compatible: + contains: + const: mediatek,mt8195-iommu-infra + + then: + required: + - mediatek,larbs + additionalProperties: false examples: @@ -173,13 +195,3 @@ examples: <&larb3>, <&larb4>, <&larb5>; #iommu-cells = <1>; }; - - - | - #include - - /* Example for a client device */ - display { - compatible = "mediatek,mt8173-disp"; - iommus = <&iommu M4U_PORT_DISP_OVL0>, - <&iommu M4U_PORT_DISP_RDMA0>; - }; diff --git a/dts/Bindings/iommu/samsung,sysmmu.yaml b/dts/Bindings/iommu/samsung,sysmmu.yaml index af51b91c89..672a0beea6 100644 --- a/dts/Bindings/iommu/samsung,sysmmu.yaml +++ b/dts/Bindings/iommu/samsung,sysmmu.yaml @@ -86,16 +86,6 @@ examples: - | #include - gsc_0: scaler@13e00000 { - compatible = "samsung,exynos5-gsc"; - reg = <0x13e00000 0x1000>; - interrupts = <0 85 0>; - power-domains = <&pd_gsc>; - clocks = <&clock CLK_GSCL0>; - clock-names = "gscl"; - iommus = <&sysmmu_gsc0>; - }; - sysmmu_gsc0: iommu@13e80000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13E80000 0x1000>; @@ -107,4 +97,3 @@ examples: power-domains = <&pd_gsc>; #iommu-cells = <0>; }; - diff --git a/dts/Bindings/leds/backlight/qcom-wled.yaml b/dts/Bindings/leds/backlight/qcom-wled.yaml index 1c24b333c6..5d66c3e4de 100644 --- a/dts/Bindings/leds/backlight/qcom-wled.yaml +++ b/dts/Bindings/leds/backlight/qcom-wled.yaml @@ -81,7 +81,7 @@ properties: description: | kHz; switching frequency. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, + enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ] qcom,ovp: diff --git a/dts/Bindings/leds/kinetic,ktd2692.yaml b/dts/Bindings/leds/kinetic,ktd2692.yaml new file mode 100644 index 0000000000..bac95a51af --- /dev/null +++ b/dts/Bindings/leds/kinetic,ktd2692.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/kinetic,ktd2692.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: KTD2692 Flash LED Driver from Kinetic Technologies + +maintainers: + - Markuss Broks + +description: | + KTD2692 is the ideal power solution for high-power flash LEDs. + It uses ExpressWire single-wire programming for maximum flexibility. + + The ExpressWire interface through CTRL pin can control LED on/off and + enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current, + Flash timeout, LVP(low voltage protection). + + Also, When the AUX pin is pulled high while CTRL pin is high, + LED current will be ramped up to the flash-mode current level. + +properties: + compatible: + const: kinetic,ktd2692 + + ctrl-gpios: + maxItems: 1 + description: Specifier of the GPIO connected to CTRL pin. + + aux-gpios: + maxItems: 1 + description: Specifier of the GPIO connected to CTRL pin. + + vin-supply: + description: LED supply (2.7V to 5.5V). + + led: + type: object + $ref: common.yaml# + description: Properties for the LED. + properties: + function: true + color: true + flash-max-timeout-us: + description: Flash LED maximum timeout. + + led-max-microamp: + maximum: 300000 + description: Minimum Threshold for Timer protection + is defined internally (Maximum 300mA). + + flash-max-microamp: + maximum: 300000 + description: Flash LED maximum current + Formula - I(uA) = 15000000 / Rset. + + additionalProperties: false + +required: + - compatible + - ctrl-gpios + - led + +additionalProperties: false + +examples: + - | + #include + #include + + ktd2692 { + compatible = "kinetic,ktd2692"; + ctrl-gpios = <&gpc0 1 0>; + aux-gpios = <&gpc0 2 0>; + vin-supply = <&vbat>; + + led { + function = LED_FUNCTION_FLASH; + color = ; + flash-max-timeout-us = <250000>; + flash-max-microamp = <150000>; + led-max-microamp = <25000>; + }; + }; + +... diff --git a/dts/Bindings/leds/leds-class-multicolor.yaml b/dts/Bindings/leds/leds-class-multicolor.yaml index 37445c68cd..f41d021ed6 100644 --- a/dts/Bindings/leds/leds-class-multicolor.yaml +++ b/dts/Bindings/leds/leds-class-multicolor.yaml @@ -20,7 +20,7 @@ description: | within this documentation directory. patternProperties: - "^multi-led@([0-9a-f])$": + "^multi-led(@[0-9a-f])?$": type: object description: Represents the LEDs that are to be grouped. properties: diff --git a/dts/Bindings/leds/leds-ktd2692.txt b/dts/Bindings/leds/leds-ktd2692.txt deleted file mode 100644 index 8537374525..0000000000 --- a/dts/Bindings/leds/leds-ktd2692.txt +++ /dev/null @@ -1,50 +0,0 @@ -* Kinetic Technologies - KTD2692 Flash LED Driver - -KTD2692 is the ideal power solution for high-power flash LEDs. -It uses ExpressWire single-wire programming for maximum flexibility. - -The ExpressWire interface through CTRL pin can control LED on/off and -enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current, -Flash timeout, LVP(low voltage protection). - -Also, When the AUX pin is pulled high while CTRL pin is high, -LED current will be ramped up to the flash-mode current level. - -Required properties: -- compatible : Should be "kinetic,ktd2692". -- ctrl-gpios : Specifier of the GPIO connected to CTRL pin. -- aux-gpios : Specifier of the GPIO connected to AUX pin. - -Optional properties: -- vin-supply : "vin" LED supply (2.7V to 5.5V). - See Documentation/devicetree/bindings/regulator/regulator.txt - -A discrete LED element connected to the device must be represented by a child -node - See Documentation/devicetree/bindings/leds/common.txt - -Required properties for flash LED child nodes: - See Documentation/devicetree/bindings/leds/common.txt -- led-max-microamp : Minimum Threshold for Timer protection - is defined internally (Maximum 300mA). -- flash-max-microamp : Flash LED maximum current - Formula : I(mA) = 15000 / Rset. -- flash-max-timeout-us : Flash LED maximum timeout. - -Optional properties for flash LED child nodes: -- label : See Documentation/devicetree/bindings/leds/common.txt - -Example: - -ktd2692 { - compatible = "kinetic,ktd2692"; - ctrl-gpios = <&gpc0 1 0>; - aux-gpios = <&gpc0 2 0>; - vin-supply = <&vbat>; - - flash-led { - label = "ktd2692-flash"; - led-max-microamp = <300000>; - flash-max-microamp = <1500000>; - flash-max-timeout-us = <1835000>; - }; -}; diff --git a/dts/Bindings/leds/leds-mt6360.yaml b/dts/Bindings/leds/leds-mt6360.yaml index 10f95bf1d6..69e579226d 100644 --- a/dts/Bindings/leds/leds-mt6360.yaml +++ b/dts/Bindings/leds/leds-mt6360.yaml @@ -11,7 +11,7 @@ maintainers: description: | This module is part of the MT6360 MFD device. - see Documentation/devicetree/bindings/mfd/mt6360.yaml + see Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode, and 4-channel RGB LED support Register/Flash/Breath Mode diff --git a/dts/Bindings/leds/leds-pwm-multicolor.yaml b/dts/Bindings/leds/leds-pwm-multicolor.yaml new file mode 100644 index 0000000000..6625a528f7 --- /dev/null +++ b/dts/Bindings/leds/leds-pwm-multicolor.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-pwm-multicolor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Multi-color LEDs connected to PWM + +maintainers: + - Sven Schwermer + +description: | + This driver combines several monochrome PWM LEDs into one multi-color + LED using the multicolor LED class. + +properties: + compatible: + const: pwm-leds-multicolor + + multi-led: + type: object + + patternProperties: + "^led-[0-9a-z]+$": + type: object + $ref: common.yaml# + + additionalProperties: false + + properties: + pwms: + maxItems: 1 + + pwm-names: true + + color: true + + required: + - pwms + - color + +required: + - compatible + +allOf: + - $ref: leds-class-multicolor.yaml# + +additionalProperties: false + +examples: + - | + #include + + led-controller { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = ; + function = LED_FUNCTION_INDICATOR; + max-brightness = <65535>; + + led-red { + pwms = <&pwm1 0 1000000>; + color = ; + }; + + led-green { + pwms = <&pwm2 0 1000000>; + color = ; + }; + + led-blue { + pwms = <&pwm3 0 1000000>; + color = ; + }; + }; + }; + +... diff --git a/dts/Bindings/leds/leds-qcom-lpg.yaml b/dts/Bindings/leds/leds-qcom-lpg.yaml new file mode 100644 index 0000000000..409a4c7298 --- /dev/null +++ b/dts/Bindings/leds/leds-qcom-lpg.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Light Pulse Generator + +maintainers: + - Bjorn Andersson + +description: > + The Qualcomm Light Pulse Generator consists of three different hardware blocks; + a ramp generator with lookup table, the light pulse generator and a three + channel current sink. These blocks are found in a wide range of Qualcomm PMICs. + +properties: + compatible: + enum: + - qcom,pm8150b-lpg + - qcom,pm8150l-lpg + - qcom,pm8350c-pwm + - qcom,pm8916-pwm + - qcom,pm8941-lpg + - qcom,pm8994-lpg + - qcom,pmc8180c-lpg + - qcom,pmi8994-lpg + - qcom,pmi8998-lpg + + "#pwm-cells": + const: 2 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + qcom,power-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + power-source used to drive the output, as defined in the datasheet. + Should be specified if the TRILED block is present + enum: [0, 1, 3] + + qcom,dtest: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: > + A list of integer pairs, where each pair represent the dtest line the + particular channel should be connected to and the flags denoting how the + value should be outputed, as defined in the datasheet. The number of + pairs should be the same as the number of channels. + items: + items: + - description: dtest line to attach + - description: flags for the attachment + + multi-led: + type: object + $ref: leds-class-multicolor.yaml# + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^led@[0-9a-f]$": + type: object + $ref: common.yaml# + +patternProperties: + "^led@[0-9a-f]$": + type: object + $ref: common.yaml# + + properties: + reg: true + + required: + - reg + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include + + led-controller { + compatible = "qcom,pmi8994-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,power-source = <1>; + + qcom,dtest = <0 0>, + <0 0>, + <0 0>, + <4 1>; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led@2 { + reg = <2>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <0>; + default-state = "on"; + }; + + led@3 { + reg = <3>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led@4 { + reg = <4>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + }; + - | + #include + + led-controller { + compatible = "qcom,pmi8994-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,power-source = <1>; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = ; + }; + + led@2 { + reg = <2>; + color = ; + }; + + led@3 { + reg = <3>; + color = ; + }; + }; + }; + - | + pwm-controller { + compatible = "qcom,pm8916-pwm"; + #pwm-cells = <2>; + }; +... diff --git a/dts/Bindings/leds/regulator-led.yaml b/dts/Bindings/leds/regulator-led.yaml new file mode 100644 index 0000000000..3e020d700c --- /dev/null +++ b/dts/Bindings/leds/regulator-led.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/regulator-led.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Device Tree Bindings for Regulator LEDs + +maintainers: + - Linus Walleij + +description: | + Regulator LEDs are powered by a single regulator such that they can + be turned on or off by enabling or disabling the regulator. The available + brightness settings will be inferred from the available voltages on the + regulator, and any constraints on the voltage or current will need to be + specified on the regulator. + +allOf: + - $ref: common.yaml# + +properties: + $nodename: + pattern: '^led.*$' + + compatible: + const: regulator-led + + vled-supply: + description: + The regulator controlling the current to the LED. + + function: true + color: true + linux,default-trigger: true + default-state: true + +required: + - compatible + - vled-supply + +additionalProperties: false + +examples: + - | + #include + + led-heartbeat { + compatible = "regulator-led"; + vled-supply = <®ulator>; + function = LED_FUNCTION_STATUS; + color = ; + linux,default-trigger = "heartbeat"; + }; +... diff --git a/dts/Bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/dts/Bindings/mailbox/amlogic,meson-gxbb-mhu.yaml index aa2b3bf56b..ea06976fbb 100644 --- a/dts/Bindings/mailbox/amlogic,meson-gxbb-mhu.yaml +++ b/dts/Bindings/mailbox/amlogic,meson-gxbb-mhu.yaml @@ -51,4 +51,3 @@ examples: interrupts = <208>, <209>, <210>; #mbox-cells = <1>; }; - diff --git a/dts/Bindings/mailbox/mtk,adsp-mbox.yaml b/dts/Bindings/mailbox/mtk,adsp-mbox.yaml index fe454a1fba..72c1d9e82c 100644 --- a/dts/Bindings/mailbox/mtk,adsp-mbox.yaml +++ b/dts/Bindings/mailbox/mtk,adsp-mbox.yaml @@ -11,14 +11,15 @@ maintainers: description: | The MTK ADSP mailbox Inter-Processor Communication (IPC) enables the SoC - to ommunicate with ADSP by passing messages through two mailbox channels. + to communicate with ADSP by passing messages through two mailbox channels. The MTK ADSP mailbox IPC also provides the ability for one processor to signal the other processor using interrupts. properties: compatible: - items: - - const: mediatek,mt8195-adsp-mbox + enum: + - mediatek,mt8195-adsp-mbox + - mediatek,mt8186-adsp-mbox "#mbox-cells": const: 0 diff --git a/dts/Bindings/mailbox/nvidia,tegra186-hsp.yaml b/dts/Bindings/mailbox/nvidia,tegra186-hsp.yaml index 9f7a7296b5..a3e87516d6 100644 --- a/dts/Bindings/mailbox/nvidia,tegra186-hsp.yaml +++ b/dts/Bindings/mailbox/nvidia,tegra186-hsp.yaml @@ -26,6 +26,15 @@ description: | second cell is used to identify the mailbox that the client is going to use. + For shared mailboxes, the first cell composed of two fields: + - bits 15..8: + A bit mask of flags that further specifies the type of shared + mailbox to be used (based on the data size). If no flag is + specified then, 32-bit shared mailbox is used. + - bits 7..0: + Defines the type of the mailbox to be used. This field should be + TEGRA_HSP_MBOX_TYPE_SM for shared mailboxes. + For doorbells, the second cell specifies the index of the doorbell to use. diff --git a/dts/Bindings/mailbox/qcom-ipcc.yaml b/dts/Bindings/mailbox/qcom-ipcc.yaml index 866efb2788..1994be8589 100644 --- a/dts/Bindings/mailbox/qcom-ipcc.yaml +++ b/dts/Bindings/mailbox/qcom-ipcc.yaml @@ -27,6 +27,7 @@ properties: - qcom,sm6350-ipcc - qcom,sm8250-ipcc - qcom,sm8350-ipcc + - qcom,sm8450-ipcc - qcom,sc7280-ipcc - const: qcom,ipcc @@ -61,23 +62,14 @@ additionalProperties: false examples: - | - #include - #include + #include + #include - mailbox@408000 { - compatible = "qcom,sm8250-ipcc", "qcom,ipcc"; - reg = <0x408000 0x1000>; - interrupts = ; - interrupt-controller; - #interrupt-cells = <3>; - #mbox-cells = <2>; - }; - - smp2p-modem { - compatible = "qcom,smp2p"; - interrupts-extended = <&ipcc_mproc IPCC_CLIENT_MPSS - IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>; - - /* Other SMP2P fields */ - }; + mailbox@408000 { + compatible = "qcom,sm8250-ipcc", "qcom,ipcc"; + reg = <0x408000 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; diff --git a/dts/Bindings/mailbox/st,stm32-ipcc.yaml b/dts/Bindings/mailbox/st,stm32-ipcc.yaml index 8eb4bf52ea..2c8b47285a 100644 --- a/dts/Bindings/mailbox/st,stm32-ipcc.yaml +++ b/dts/Bindings/mailbox/st,stm32-ipcc.yaml @@ -30,15 +30,11 @@ properties: items: - description: rx channel occupied - description: tx channel free - - description: wakeup source - minItems: 2 interrupt-names: items: - const: rx - const: tx - - const: wakeup - minItems: 2 wakeup-source: true @@ -70,10 +66,9 @@ examples: #mbox-cells = <1>; reg = <0x4c001000 0x400>; st,proc-id = <0>; - interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>, - <&intc GIC_SPI 101 IRQ_TYPE_NONE>, - <&aiec 62 1>; - interrupt-names = "rx", "tx", "wakeup"; + interrupts-extended = <&exti 61 1>, + <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; clocks = <&rcc_clk IPCC>; wakeup-source; }; diff --git a/dts/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/dts/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt deleted file mode 100644 index ad76edccf8..0000000000 --- a/dts/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt +++ /dev/null @@ -1,127 +0,0 @@ -Xilinx IPI Mailbox Controller -======================================== - -The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage -messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI -agent owns registers used for notification and buffers for message. - - +-------------------------------------+ - | Xilinx ZynqMP IPI Controller | - +-------------------------------------+ - +--------------------------------------------------+ -ATF | | - | | - | | - +--------------------------+ | - | | - | | - +--------------------------------------------------+ - +------------------------------------------+ - | +----------------+ +----------------+ | -Hardware | | IPI Agent | | IPI Buffers | | - | | Registers | | | | - | | | | | | - | +----------------+ +----------------+ | - | | - | Xilinx IPI Agent Block | - +------------------------------------------+ - - -Controller Device Node: -=========================== -Required properties: --------------------- -IPI agent node: -- compatible: Shall be: "xlnx,zynqmp-ipi-mailbox" -- interrupt-parent: Phandle for the interrupt controller -- interrupts: Interrupt information corresponding to the - interrupt-names property. -- xlnx,ipi-id: local Xilinx IPI agent ID -- #address-cells: number of address cells of internal IPI mailbox nodes -- #size-cells: number of size cells of internal IPI mailbox nodes - -Internal IPI mailbox node: -- reg: IPI buffers address ranges -- reg-names: Names of the reg resources. It should have: - * local_request_region - - IPI request msg buffer written by local and read - by remote - * local_response_region - - IPI response msg buffer written by local and read - by remote - * remote_request_region - - IPI request msg buffer written by remote and read - by local - * remote_response_region - - IPI response msg buffer written by remote and read - by local -- #mbox-cells: Shall be 1. It contains: - * tx(0) or rx(1) channel -- xlnx,ipi-id: remote Xilinx IPI agent ID of which the mailbox is - connected to. - -Optional properties: --------------------- -- method: The method of accessing the IPI agent registers. - Permitted values are: "smc" and "hvc". Default is - "smc". - -Client Device Node: -=========================== -Required properties: --------------------- -- mboxes: Standard property to specify a mailbox - (See ./mailbox.txt) -- mbox-names: List of identifier strings for each mailbox - channel. - -Example: -=========================== - zynqmp_ipi { - compatible = "xlnx,zynqmp-ipi-mailbox"; - interrupt-parent = <&gic>; - interrupts = <0 29 4>; - xlnx,ipi-id = <0>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* APU<->RPU0 IPI mailbox controller */ - ipi_mailbox_rpu0: mailbox@ff990400 { - reg = <0xff990400 0x20>, - <0xff990420 0x20>, - <0xff990080 0x20>, - <0xff9900a0 0x20>; - reg-names = "local_request_region", - "local_response_region", - "remote_request_region", - "remote_response_region"; - #mbox-cells = <1>; - xlnx,ipi-id = <1>; - }; - /* APU<->RPU1 IPI mailbox controller */ - ipi_mailbox_rpu1: mailbox@ff990440 { - reg = <0xff990440 0x20>, - <0xff990460 0x20>, - <0xff990280 0x20>, - <0xff9902a0 0x20>; - reg-names = "local_request_region", - "local_response_region", - "remote_request_region", - "remote_response_region"; - #mbox-cells = <1>; - xlnx,ipi-id = <2>; - }; - }; - rpu0 { - ... - mboxes = <&ipi_mailbox_rpu0 0>, - <&ipi_mailbox_rpu0 1>; - mbox-names = "tx", "rx"; - }; - rpu1 { - ... - mboxes = <&ipi_mailbox_rpu1 0>, - <&ipi_mailbox_rpu1 1>; - mbox-names = "tx", "rx"; - }; diff --git a/dts/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/dts/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml new file mode 100644 index 0000000000..2193141dd7 --- /dev/null +++ b/dts/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/xlnx,zynqmp-ipi-mailbox.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Xilinx IPI(Inter Processor Interrupt) mailbox controller + +description: | + The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage + messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI + agent owns registers used for notification and buffers for message. + + +-------------------------------------+ + | Xilinx ZynqMP IPI Controller | + +-------------------------------------+ + +--------------------------------------------------+ + TF-A | | + | | + | | + +--------------------------+ | + | | + | | + +--------------------------------------------------+ + +------------------------------------------+ + | +----------------+ +----------------+ | + Hardware | | IPI Agent | | IPI Buffers | | + | | Registers | | | | + | | | | | | + | +----------------+ +----------------+ | + | | + | Xilinx IPI Agent Block | + +------------------------------------------+ + +maintainers: + - Shubhrajyoti Datta + +properties: + compatible: + const: xlnx,zynqmp-ipi-mailbox + + method: + description: | + The method of calling the PM-API firmware layer. + Permitted values are. + - "smc" : SMC #0, following the SMCCC + - "hvc" : HVC #0, following the SMCCC + + $ref: /schemas/types.yaml#/definitions/string + enum: + - smc + - hvc + default: smc + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + + xlnx,ipi-id: + description: | + Remote Xilinx IPI agent ID of which the mailbox is connected to. + $ref: /schemas/types.yaml#/definitions/uint32 + + interrupts: + maxItems: 1 + + ranges: true + +patternProperties: + '^mailbox@[0-9a-f]+$': + description: Internal ipi mailbox node + type: object # DT nodes are json objects + properties: + xlnx,ipi-id: + description: + Remote Xilinx IPI agent ID of which the mailbox is connected to. + $ref: /schemas/types.yaml#/definitions/uint32 + + '#mbox-cells': + const: 1 + description: + It contains tx(0) or rx(1) channel IPI id number. + + reg: + maxItems: 4 + + reg-names: + items: + - const: local_request_region + - const: local_response_region + - const: remote_request_region + - const: remote_response_region + + required: + - reg + - reg-names + - "#mbox-cells" + +additionalProperties: false + +required: + - compatible + - interrupts + - '#address-cells' + - '#size-cells' + - xlnx,ipi-id + +examples: + - | + #include + + amba { + #address-cells = <0x2>; + #size-cells = <0x2>; + zynqmp-mailbox { + compatible = "xlnx,zynqmp-ipi-mailbox"; + interrupts = ; + xlnx,ipi-id = <0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mailbox: mailbox@ff9905c0 { + reg = <0x0 0xff9905c0 0x0 0x20>, + <0x0 0xff9905e0 0x0 0x20>, + <0x0 0xff990e80 0x0 0x20>, + <0x0 0xff990ea0 0x0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <4>; + }; + }; + }; + +... diff --git a/dts/Bindings/media/i2c/adv7604.yaml b/dts/Bindings/media/i2c/adv7604.yaml index c19d8391e2..7589d377c6 100644 --- a/dts/Bindings/media/i2c/adv7604.yaml +++ b/dts/Bindings/media/i2c/adv7604.yaml @@ -60,7 +60,8 @@ properties: enables hot-plug detection. default-input: - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] description: Select which input is selected after reset. diff --git a/dts/Bindings/media/i2c/dongwoon,dw9807-vcm.txt b/dts/Bindings/media/i2c/dongwoon,dw9807-vcm.txt deleted file mode 100644 index c4701f1eaa..0000000000 --- a/dts/Bindings/media/i2c/dongwoon,dw9807-vcm.txt +++ /dev/null @@ -1,9 +0,0 @@ -Dongwoon Anatech DW9807 voice coil lens driver - -DW9807 is a 10-bit DAC with current sink capability. It is intended for -controlling voice coil lenses. - -Mandatory properties: - -- compatible: "dongwoon,dw9807-vcm" -- reg: I2C slave address diff --git a/dts/Bindings/media/i2c/dongwoon,dw9807-vcm.yaml b/dts/Bindings/media/i2c/dongwoon,dw9807-vcm.yaml new file mode 100644 index 0000000000..aae246ca3f --- /dev/null +++ b/dts/Bindings/media/i2c/dongwoon,dw9807-vcm.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2018, 2021 Intel Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9807-vcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dongwoon Anatech DW9807 voice coil lens driver + +maintainers: + - Sakari Ailus + +description: | + DW9807 is a 10-bit DAC with current sink capability. It is intended for + controlling voice coil lenses. + +properties: + compatible: + const: dongwoon,dw9807-vcm + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + lens@e { + compatible = "dongwoon,dw9807-vcm"; + reg = <0x0e>; + }; + }; +... diff --git a/dts/Bindings/media/i2c/sony,imx412.yaml b/dts/Bindings/media/i2c/sony,imx412.yaml index afcf70947f..26d1807d0b 100644 --- a/dts/Bindings/media/i2c/sony,imx412.yaml +++ b/dts/Bindings/media/i2c/sony,imx412.yaml @@ -32,6 +32,15 @@ properties: description: Clock frequency 6MHz, 12MHz, 18MHz, 24MHz or 27MHz maxItems: 1 + dovdd-supply: + description: Interface power supply. + + avdd-supply: + description: Analog power supply. + + dvdd-supply: + description: Digital power supply. + reset-gpios: description: Reference to the GPIO connected to the XCLR pin, if any. maxItems: 1 diff --git a/dts/Bindings/media/mediatek,vcodec-encoder.yaml b/dts/Bindings/media/mediatek,vcodec-encoder.yaml index deb5b657a2..d36fcca04c 100644 --- a/dts/Bindings/media/mediatek,vcodec-encoder.yaml +++ b/dts/Bindings/media/mediatek,vcodec-encoder.yaml @@ -63,6 +63,9 @@ properties: description: Describes point to scp. + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/media/mediatek,vcodec-subdev-decoder.yaml b/dts/Bindings/media/mediatek,vcodec-subdev-decoder.yaml index c73bf2352a..440646e44c 100644 --- a/dts/Bindings/media/mediatek,vcodec-subdev-decoder.yaml +++ b/dts/Bindings/media/mediatek,vcodec-subdev-decoder.yaml @@ -47,7 +47,9 @@ description: | properties: compatible: - const: mediatek,mt8192-vcodec-dec + enum: + - mediatek,mt8192-vcodec-dec + - mediatek,mt8186-vcodec-dec reg: maxItems: 1 diff --git a/dts/Bindings/media/microchip,xisc.yaml b/dts/Bindings/media/microchip,xisc.yaml index 086e1430af..8b37fccab5 100644 --- a/dts/Bindings/media/microchip,xisc.yaml +++ b/dts/Bindings/media/microchip,xisc.yaml @@ -67,7 +67,7 @@ properties: remote-endpoint: true bus-width: - enum: [8, 9, 10, 11, 12] + enum: [8, 9, 10, 11, 12, 14] default: 12 hsync-active: @@ -126,4 +126,3 @@ examples: }; }; }; - diff --git a/dts/Bindings/media/rockchip,vdec.yaml b/dts/Bindings/media/rockchip,vdec.yaml index 089f11d21b..3bcfb8e123 100644 --- a/dts/Bindings/media/rockchip,vdec.yaml +++ b/dts/Bindings/media/rockchip,vdec.yaml @@ -18,7 +18,9 @@ properties: oneOf: - const: rockchip,rk3399-vdec - items: - - const: rockchip,rk3228-vdec + - enum: + - rockchip,rk3228-vdec + - rockchip,rk3328-vdec - const: rockchip,rk3399-vdec reg: diff --git a/dts/Bindings/media/rockchip-vpu.yaml b/dts/Bindings/media/rockchip-vpu.yaml index bacb60a349..6cc4d3e5a6 100644 --- a/dts/Bindings/media/rockchip-vpu.yaml +++ b/dts/Bindings/media/rockchip-vpu.yaml @@ -23,6 +23,7 @@ properties: - rockchip,rk3328-vpu - rockchip,rk3399-vpu - rockchip,px30-vpu + - rockchip,rk3568-vpu - items: - const: rockchip,rk3188-vpu - const: rockchip,rk3066-vpu diff --git a/dts/Bindings/media/video-interfaces.yaml b/dts/Bindings/media/video-interfaces.yaml index 4391dce2ca..68c3b9871c 100644 --- a/dts/Bindings/media/video-interfaces.yaml +++ b/dts/Bindings/media/video-interfaces.yaml @@ -93,6 +93,7 @@ properties: - 4 # MIPI CSI-2 D-PHY - 5 # Parallel - 6 # BT.656 + - 7 # DPI description: Data bus type. diff --git a/dts/Bindings/memory-controllers/fsl/fsl,ddr.yaml b/dts/Bindings/memory-controllers/fsl/fsl,ddr.yaml index af5147f9da..84f778a995 100644 --- a/dts/Bindings/memory-controllers/fsl/fsl,ddr.yaml +++ b/dts/Bindings/memory-controllers/fsl/fsl,ddr.yaml @@ -25,12 +25,6 @@ properties: - const: fsl,qoriq-memory-controller - enum: - fsl,bsc9132-memory-controller - - fsl,8540-memory-controller - - fsl,8541-memory-controller - - fsl,8544-memory-controller - - fsl,8548-memory-controller - - fsl,8555-memory-controller - - fsl,8568-memory-controller - fsl,mpc8536-memory-controller - fsl,mpc8540-memory-controller - fsl,mpc8541-memory-controller diff --git a/dts/Bindings/memory-controllers/ingenic,nemc-peripherals.yaml b/dts/Bindings/memory-controllers/ingenic,nemc-peripherals.yaml new file mode 100644 index 0000000000..b8ed52a44d --- /dev/null +++ b/dts/Bindings/memory-controllers/ingenic,nemc-peripherals.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc-peripherals.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs NAND / External Memory Controller (NEMC) devicetree bindings + +maintainers: + - Paul Cercueil + +properties: + reg: + minItems: 1 + maxItems: 255 + + ingenic,nemc-bus-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + description: Specifies the bus width in bits. + + ingenic,nemc-tAS: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Address setup time in nanoseconds. + + ingenic,nemc-tAH: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Address hold time in nanoseconds. + + ingenic,nemc-tBP: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Burst pitch time in nanoseconds. + + ingenic,nemc-tAW: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Address wait time in nanoseconds. + + ingenic,nemc-tSTRV: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Static memory recovery time in nanoseconds. + +required: + - reg + +additionalProperties: true +... diff --git a/dts/Bindings/memory-controllers/ingenic,nemc.yaml b/dts/Bindings/memory-controllers/ingenic,nemc.yaml index 24f9e19820..dd13a5106d 100644 --- a/dts/Bindings/memory-controllers/ingenic,nemc.yaml +++ b/dts/Bindings/memory-controllers/ingenic,nemc.yaml @@ -39,38 +39,6 @@ properties: patternProperties: ".*@[0-9]+$": type: object - properties: - reg: - minItems: 1 - maxItems: 255 - - ingenic,nemc-bus-width: - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [8, 16] - description: Specifies the bus width in bits. - - ingenic,nemc-tAS: - $ref: /schemas/types.yaml#/definitions/uint32 - description: Address setup time in nanoseconds. - - ingenic,nemc-tAH: - $ref: /schemas/types.yaml#/definitions/uint32 - description: Address hold time in nanoseconds. - - ingenic,nemc-tBP: - $ref: /schemas/types.yaml#/definitions/uint32 - description: Burst pitch time in nanoseconds. - - ingenic,nemc-tAW: - $ref: /schemas/types.yaml#/definitions/uint32 - description: Address wait time in nanoseconds. - - ingenic,nemc-tSTRV: - $ref: /schemas/types.yaml#/definitions/uint32 - description: Static memory recovery time in nanoseconds. - - required: - - reg required: - compatible diff --git a/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml b/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml index 13c4c82fd0..c7cfa6c2cd 100644 --- a/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml +++ b/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml @@ -34,8 +34,12 @@ properties: - nvidia,tegra234-mc reg: - minItems: 1 - maxItems: 3 + minItems: 6 + maxItems: 18 + + reg-names: + minItems: 6 + maxItems: 18 interrupts: items: @@ -142,7 +146,18 @@ allOf: then: properties: reg: - maxItems: 1 + maxItems: 6 + description: 5 memory controller channels and 1 for stream-id registers + + reg-names: + maxItems: 6 + items: + - const: sid + - const: broadcast + - const: ch0 + - const: ch1 + - const: ch2 + - const: ch3 - if: properties: @@ -151,7 +166,30 @@ allOf: then: properties: reg: - minItems: 3 + minItems: 18 + description: 17 memory controller channels and 1 for stream-id registers + + reg-names: + minItems: 18 + items: + - const: sid + - const: broadcast + - const: ch0 + - const: ch1 + - const: ch2 + - const: ch3 + - const: ch4 + - const: ch5 + - const: ch6 + - const: ch7 + - const: ch8 + - const: ch9 + - const: ch10 + - const: ch11 + - const: ch12 + - const: ch13 + - const: ch14 + - const: ch15 - if: properties: @@ -160,13 +198,37 @@ allOf: then: properties: reg: - minItems: 3 + minItems: 18 + description: 17 memory controller channels and 1 for stream-id registers + + reg-names: + minItems: 18 + items: + - const: sid + - const: broadcast + - const: ch0 + - const: ch1 + - const: ch2 + - const: ch3 + - const: ch4 + - const: ch5 + - const: ch6 + - const: ch7 + - const: ch8 + - const: ch9 + - const: ch10 + - const: ch11 + - const: ch12 + - const: ch13 + - const: ch14 + - const: ch15 additionalProperties: false required: - compatible - reg + - reg-names - interrupts - "#address-cells" - "#size-cells" @@ -182,7 +244,13 @@ examples: memory-controller@2c00000 { compatible = "nvidia,tegra186-mc"; - reg = <0x0 0x02c00000 0x0 0xb0000>; + reg = <0x0 0x02c00000 0x0 0x10000>, /* MC-SID */ + <0x0 0x02c10000 0x0 0x10000>, /* Broadcast channel */ + <0x0 0x02c20000 0x0 0x10000>, /* MC0 */ + <0x0 0x02c30000 0x0 0x10000>, /* MC1 */ + <0x0 0x02c40000 0x0 0x10000>, /* MC2 */ + <0x0 0x02c50000 0x0 0x10000>; /* MC3 */ + reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3"; interrupts = ; #address-cells = <2>; diff --git a/dts/Bindings/memory-controllers/renesas,h8300-bsc.yaml b/dts/Bindings/memory-controllers/renesas,h8300-bsc.yaml deleted file mode 100644 index 514b2c5f88..0000000000 --- a/dts/Bindings/memory-controllers/renesas,h8300-bsc.yaml +++ /dev/null @@ -1,35 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/memory-controllers/renesas,h8300-bsc.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: H8/300 bus controller - -maintainers: - - Krzysztof Kozlowski - - Yoshinori Sato - -properties: - compatible: - items: - - enum: - - renesas,h8300h-bsc - - renesas,h8s-bsc - - const: renesas,h8300-bsc - - reg: - maxItems: 1 - -required: - - compatible - - reg - -additionalProperties: false - -examples: - - | - memory-controller@fee01e { - compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc"; - reg = <0xfee01e 8>; - }; diff --git a/dts/Bindings/memory-controllers/renesas,rpc-if.yaml b/dts/Bindings/memory-controllers/renesas,rpc-if.yaml index 9a6dbf54b5..645249ea21 100644 --- a/dts/Bindings/memory-controllers/renesas,rpc-if.yaml +++ b/dts/Bindings/memory-controllers/renesas,rpc-if.yaml @@ -31,14 +31,20 @@ properties: - renesas,r8a774b1-rpc-if # RZ/G2N - renesas,r8a774c0-rpc-if # RZ/G2E - renesas,r8a774e1-rpc-if # RZ/G2H + - renesas,r8a7795-rpc-if # R-Car H3 + - renesas,r8a7796-rpc-if # R-Car M3-W + - renesas,r8a77961-rpc-if # R-Car M3-W+ + - renesas,r8a77965-rpc-if # R-Car M3-N - renesas,r8a77970-rpc-if # R-Car V3M - renesas,r8a77980-rpc-if # R-Car V3H + - renesas,r8a77990-rpc-if # R-Car E3 - renesas,r8a77995-rpc-if # R-Car D3 - renesas,r8a779a0-rpc-if # R-Car V3U - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 or RZ/G2{E,H,M,N} device - items: - enum: + - renesas,r9a07g043-rpc-if # RZ/G2UL - renesas,r9a07g044-rpc-if # RZ/G2{L,LC} - renesas,r9a07g054-rpc-if # RZ/V2L - const: renesas,rzg2l-rpc-if diff --git a/dts/Bindings/memory-controllers/rockchip,rk3399-dmc.yaml b/dts/Bindings/memory-controllers/rockchip,rk3399-dmc.yaml new file mode 100644 index 0000000000..fb4920397d --- /dev/null +++ b/dts/Bindings/memory-controllers/rockchip,rk3399-dmc.yaml @@ -0,0 +1,384 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# %YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/rockchip,rk3399-dmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip rk3399 DMC (Dynamic Memory Controller) device + +maintainers: + - Brian Norris + +properties: + compatible: + enum: + - rockchip,rk3399-dmc + + devfreq-events: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Node to get DDR loading. Refer to + Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt. + + clocks: + maxItems: 1 + + clock-names: + items: + - const: dmc_clk + + operating-points-v2: true + + center-supply: + description: + DMC regulator supply. + + rockchip,pmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "PMU general register files". + + interrupts: + maxItems: 1 + description: + The CPU interrupt number. It should be a DCF interrupt. When DDR DVFS + finishes, a DCF interrupt is triggered. + + rockchip,ddr3_speed_bin: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + For values, reference include/dt-bindings/clock/rk3399-ddr.h. Selects the + DDR3 cl-trp-trcd type. It must be set according to "Speed Bin" in DDR3 + datasheet; DO NOT use a smaller "Speed Bin" than specified for the DDR3 + being used. + + rockchip,pd_idle: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Configure the PD_IDLE value. Defines the power-down idle period in which + memories are placed into power-down mode if bus is idle for PD_IDLE DFI + clock cycles. + See also rockchip,pd-idle-ns. + + rockchip,sr_idle: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Configure the SR_IDLE value. Defines the self-refresh idle period in + which memories are placed into self-refresh mode if bus is idle for + SR_IDLE * 1024 DFI clock cycles (DFI clocks freq is half of DRAM clock). + See also rockchip,sr-idle-ns. + default: 0 + + rockchip,sr_mc_gate_idle: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the memory self-refresh and controller clock gating idle period. + Memories are placed into self-refresh mode and memory controller clock + arg gating started if bus is idle for sr_mc_gate_idle*1024 DFI clock + cycles. + See also rockchip,sr-mc-gate-idle-ns. + + rockchip,srpd_lite_idle: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the self-refresh power down idle period in which memories are + placed into self-refresh power down mode if bus is idle for + srpd_lite_idle * 1024 DFI clock cycles. This parameter is for LPDDR4 + only. + See also rockchip,srpd-lite-idle-ns. + + rockchip,standby_idle: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the standby idle period in which memories are placed into + self-refresh mode. The controller, pi, PHY and DRAM clock will be gated + if bus is idle for standby_idle * DFI clock cycles. + See also rockchip,standby-idle-ns. + + rockchip,dram_dll_dis_freq: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Defines the DDR3 DLL bypass frequency in MHz. When DDR frequency is less + than DRAM_DLL_DISB_FREQ, DDR3 DLL will be bypassed. + Note: if DLL was bypassed, the odt will also stop working. + + rockchip,phy_dll_dis_freq: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Defines the PHY dll bypass frequency in MHz (Mega Hz). When DDR frequency + is less than DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed. + Note: PHY DLL and PHY ODT are independent. + + rockchip,auto_pd_dis_freq: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the auto PD disable frequency in MHz. + + rockchip,ddr3_odt_dis_freq: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1000000 # In case anyone thought this was MHz. + description: + When the DRAM type is DDR3, this parameter defines the ODT disable + frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq, + the ODT on the DRAM side and controller side are both disabled. + + rockchip,ddr3_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the DRAM side drive + strength in ohms. + default: 40 + + rockchip,ddr3_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the DRAM side ODT + strength in ohms. + default: 120 + + rockchip,phy_ddr3_ca_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the phy side CA line + (incluing command line, address line and clock line) drive strength. + default: 40 + + rockchip,phy_ddr3_dq_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the PHY side DQ line + (including DQS/DQ/DM line) drive strength. + default: 40 + + rockchip,phy_ddr3_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the PHY side ODT + strength. + default: 240 + + rockchip,lpddr3_odt_dis_freq: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1000000 # In case anyone thought this was MHz. + description: + When the DRAM type is LPDDR3, this parameter defines then ODT disable + frequency in Hz. When DDR frequency is less then ddr3_odt_dis_freq, the + ODT on the DRAM side and controller side are both disabled. + + rockchip,lpddr3_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR3, this parameter defines the DRAM side drive + strength in ohms. + default: 34 + + rockchip,lpddr3_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT + strength in ohms. + default: 240 + + rockchip,phy_lpddr3_ca_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR3, this parameter defines the PHY side CA line + (including command line, address line and clock line) drive strength. + default: 40 + + rockchip,phy_lpddr3_dq_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line + (including DQS/DQ/DM line) drive strength. + default: 40 + + rockchip,phy_lpddr3_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When dram type is LPDDR3, this parameter define the phy side odt + strength, default value is 240. + + rockchip,lpddr4_odt_dis_freq: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1000000 # In case anyone thought this was MHz. + description: + When the DRAM type is LPDDR4, this parameter defines the ODT disable + frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq, + the ODT on the DRAM side and controller side are both disabled. + + rockchip,lpddr4_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the DRAM side drive + strength in ohms. + default: 60 + + rockchip,lpddr4_dq_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on + DQS/DQ line strength in ohms. + default: 40 + + rockchip,lpddr4_ca_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on + CA line strength in ohms. + default: 40 + + rockchip,phy_lpddr4_ca_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the PHY side CA line + (including command address line) drive strength. + default: 40 + + rockchip,phy_lpddr4_ck_cs_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the PHY side clock + line and CS line drive strength. + default: 80 + + rockchip,phy_lpddr4_dq_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line + (including DQS/DQ/DM line) drive strength. + default: 80 + + rockchip,phy_lpddr4_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the PHY side ODT + strength. + default: 60 + + rockchip,pd-idle-ns: + description: + Configure the PD_IDLE value in nanoseconds. Defines the power-down idle + period in which memories are placed into power-down mode if bus is idle + for PD_IDLE nanoseconds. + + rockchip,sr-idle-ns: + description: + Configure the SR_IDLE value in nanoseconds. Defines the self-refresh idle + period in which memories are placed into self-refresh mode if bus is idle + for SR_IDLE nanoseconds. + default: 0 + + rockchip,sr-mc-gate-idle-ns: + description: + Defines the memory self-refresh and controller clock gating idle period in nanoseconds. + Memories are placed into self-refresh mode and memory controller clock + arg gating started if bus is idle for sr_mc_gate_idle nanoseconds. + + rockchip,srpd-lite-idle-ns: + description: + Defines the self-refresh power down idle period in which memories are + placed into self-refresh power down mode if bus is idle for + srpd_lite_idle nanoseonds. This parameter is for LPDDR4 only. + + rockchip,standby-idle-ns: + description: + Defines the standby idle period in which memories are placed into + self-refresh mode. The controller, pi, PHY and DRAM clock will be gated + if bus is idle for standby_idle nanoseconds. + + rockchip,pd-idle-dis-freq-hz: + description: + Defines the power-down idle disable frequency in Hz. When the DDR + frequency is greater than pd-idle-dis-freq, power-down idle is disabled. + See also rockchip,pd-idle-ns. + + rockchip,sr-idle-dis-freq-hz: + description: + Defines the self-refresh idle disable frequency in Hz. When the DDR + frequency is greater than sr-idle-dis-freq, self-refresh idle is + disabled. See also rockchip,sr-idle-ns. + + rockchip,sr-mc-gate-idle-dis-freq-hz: + description: + Defines the self-refresh and memory-controller clock gating disable + frequency in Hz. When the DDR frequency is greater than + sr-mc-gate-idle-dis-freq, the clock will not be gated when idle. See also + rockchip,sr-mc-gate-idle-ns. + + rockchip,srpd-lite-idle-dis-freq-hz: + description: + Defines the self-refresh power down idle disable frequency in Hz. When + the DDR frequency is greater than srpd-lite-idle-dis-freq, memory will + not be placed into self-refresh power down mode when idle. See also + rockchip,srpd-lite-idle-ns. + + rockchip,standby-idle-dis-freq-hz: + description: + Defines the standby idle disable frequency in Hz. When the DDR frequency + is greater than standby-idle-dis-freq, standby idle is disabled. See also + rockchip,standby-idle-ns. + +required: + - compatible + - devfreq-events + - clocks + - clock-names + - operating-points-v2 + - center-supply + +additionalProperties: false + +examples: + - | + #include + #include + memory-controller { + compatible = "rockchip,rk3399-dmc"; + devfreq-events = <&dfi>; + rockchip,pmu = <&pmu>; + interrupts = ; + clocks = <&cru SCLK_DDRC>; + clock-names = "dmc_clk"; + operating-points-v2 = <&dmc_opp_table>; + center-supply = <&ppvar_centerlogic>; + rockchip,pd-idle-ns = <160>; + rockchip,sr-idle-ns = <10240>; + rockchip,sr-mc-gate-idle-ns = <40960>; + rockchip,srpd-lite-idle-ns = <61440>; + rockchip,standby-idle-ns = <81920>; + rockchip,ddr3_odt_dis_freq = <333000000>; + rockchip,lpddr3_odt_dis_freq = <333000000>; + rockchip,lpddr4_odt_dis_freq = <333000000>; + rockchip,pd-idle-dis-freq-hz = <1000000000>; + rockchip,sr-idle-dis-freq-hz = <1000000000>; + rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>; + rockchip,srpd-lite-idle-dis-freq-hz = <0>; + rockchip,standby-idle-dis-freq-hz = <928000000>; + }; diff --git a/dts/Bindings/mfd/da9063.txt b/dts/Bindings/mfd/da9063.txt index 91b79a21d4..aa8b800cc4 100644 --- a/dts/Bindings/mfd/da9063.txt +++ b/dts/Bindings/mfd/da9063.txt @@ -64,10 +64,13 @@ Sub-nodes: and KEY_SLEEP. - watchdog : This node defines settings for the Watchdog timer associated - with the DA9063 and DA9063L. There are currently no entries in this - binding, however compatible = "dlg,da9063-watchdog" should be added - if a node is created. + with the DA9063 and DA9063L. The node should contain the compatible property + with the value "dlg,da9063-watchdog". + Optional watchdog properties: + - dlg,use-sw-pm: Add this property to disable the watchdog during suspend. + Only use this option if you can't use the watchdog automatic suspend + function during a suspend (see register CONTROL_B). Example: diff --git a/dts/Bindings/mfd/google,cros-ec.yaml b/dts/Bindings/mfd/google,cros-ec.yaml index afec0bd2f1..e25caf8ef9 100644 --- a/dts/Bindings/mfd/google,cros-ec.yaml +++ b/dts/Bindings/mfd/google,cros-ec.yaml @@ -57,7 +57,7 @@ properties: mediatek,rpmsg-name: description: Must be defined if the cros-ec is a rpmsg device for a Mediatek - ARM Cortex M4 Co-processor. Contains the name pf the rpmsg + ARM Cortex M4 Co-processor. Contains the name of the rpmsg device. Used to match the subnode to the rpmsg device announced by the SCP. $ref: "/schemas/types.yaml#/definitions/string" diff --git a/dts/Bindings/mfd/mediatek,mt6360.yaml b/dts/Bindings/mfd/mediatek,mt6360.yaml new file mode 100644 index 0000000000..28eee02441 --- /dev/null +++ b/dts/Bindings/mfd/mediatek,mt6360.yaml @@ -0,0 +1,256 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6360 PMIC from MediaTek Integrated + +maintainers: + - Gene Chen + +description: | + MT6360 is a PMIC device with the following sub modules. + It is interfaced to host controller using I2C interface. + + This document describes the binding for PMIC device and its sub module. + +properties: + compatible: + const: mediatek,mt6360 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + interrupt-names: + const: IRQB + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + description: + The first cell is the IRQ number. + + regulators: + $ref: /schemas/regulator/mt6360-regulator.yaml# + + charger: + $ref: /schemas/power/supply/mt6360_charger.yaml# + + tcpc: + $ref: /schemas/usb/mediatek,mt6360-tcpc.yaml# + + led-controller: + $ref: /schemas/leds/leds-mt6360.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: + type: object + +examples: + - | + #include + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + wakeup-source; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "IRQB"; + interrupt-controller; + #interrupt-cells = <1>; + + mt6360_charger: charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-compatible = "usb-otg-vbus"; + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; + + led-controller { + compatible = "mediatek,mt6360-led"; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0>; + function = LED_FUNCTION_INDICATOR; + color = ; + led-max-microamp = <24000>; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + color = ; + }; + led@1 { + reg = <1>; + color = ; + }; + led@2 { + reg = <2>; + color = ; + }; + }; + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = ; + led-max-microamp = <150000>; + }; + led@4 { + reg = <4>; + function = LED_FUNCTION_FLASH; + color = ; + function-enumerator = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + led@5 { + reg = <5>; + function = LED_FUNCTION_FLASH; + color = ; + function-enumerator = <2>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + }; + + regulators { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&BUCK2>; + buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "mt6360,buck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = ; + }; + BUCK2: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "mt6360,buck2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = ; + }; + ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "mt6360,ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = ; + }; + ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "mt6360,ldo7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = ; + }; + ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "mt6360,ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "mt6360,ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "mt6360,ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "mt6360,ldo5"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + }; + + tcpc { + compatible = "mediatek,mt6360-tcpc"; + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "PD_IRQB"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/qcom,spmi-pmic.txt b/dts/Bindings/mfd/qcom,spmi-pmic.txt index a461ec2f75..eb78e3ae77 100644 --- a/dts/Bindings/mfd/qcom,spmi-pmic.txt +++ b/dts/Bindings/mfd/qcom,spmi-pmic.txt @@ -59,7 +59,7 @@ Required properties for peripheral child nodes: Optional properties for peripheral child nodes: - interrupts: Interrupts are specified as a 4-tuple. For more information see: - Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt + Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml - interrupt-names: Corresponding interrupt name to the interrupts property Each child node of SPMI slave id represents a function of the PMIC. In the diff --git a/dts/Bindings/mfd/rk808.txt b/dts/Bindings/mfd/rk808.txt deleted file mode 100644 index 23a17a6663..0000000000 --- a/dts/Bindings/mfd/rk808.txt +++ /dev/null @@ -1,465 +0,0 @@ -RK8XX Power Management Integrated Circuit - -The rk8xx family current members: -rk805 -rk808 -rk809 -rk817 -rk818 - -Required properties: -- compatible: "rockchip,rk805" -- compatible: "rockchip,rk808" -- compatible: "rockchip,rk809" -- compatible: "rockchip,rk817" -- compatible: "rockchip,rk818" -- reg: I2C slave address -- interrupts: the interrupt outputs of the controller. -- #clock-cells: from common clock binding; shall be set to 1 (multiple clock - outputs). See for clock IDs. - -Optional properties: -- clock-output-names: From common clock binding to override the - default output clock name -- rockchip,system-power-controller: Telling whether or not this pmic is controlling - the system power. -- wakeup-source: Device can be used as a wakeup source. - -Optional RK805 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc5-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc6-supply: The input supply for LDO_REG3 - -Optional RK808 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc7-supply: The input supply for LDO_REG3 and LDO_REG7 -- vcc8-supply: The input supply for SWITCH_REG1 -- vcc9-supply: The input supply for LDO_REG4 and LDO_REG5 -- vcc10-supply: The input supply for LDO_REG6 -- vcc11-supply: The input supply for LDO_REG8 -- vcc12-supply: The input supply for SWITCH_REG2 -- dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers - for 2 host gpio's used for dvs. The format of the gpio specifier depends in - the gpio controller. If DVS GPIOs aren't present, voltage changes will happen - very quickly with no slow ramp time. - -Optional shared RK809 and RK817 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc5-supply: The input supply for LDO_REG1, LDO_REG2, LDO_REG3 -- vcc6-supply: The input supply for LDO_REG4, LDO_REG5, LDO_REG6 -- vcc7-supply: The input supply for LDO_REG7, LDO_REG8, LDO_REG9 - -Optional RK809 properties: -- vcc8-supply: The input supply for SWITCH_REG1 -- vcc9-supply: The input supply for DCDC_REG5, SWITCH_REG2 - -Optional RK817 properties: -- clocks: The input clock for the audio codec -- clock-names: The clock name for the codec clock. Should be "mclk". -- #sound-dai-cells: Needed for the interpretation of sound dais. Should be 0. - -- vcc8-supply: The input supply for BOOST -- vcc9-supply: The input supply for OTG_SWITCH -- codec: The child node for the codec to hold additional properties. - If no additional properties are required for the codec, this - node can be omitted. - -- rockchip,mic-in-differential: Telling if the microphone uses differential - mode. Should be under the codec child node. - -Optional RK818 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- boost-supply: The input supply for DCDC_BOOST -- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc7-supply: The input supply for LDO_REG3, LDO_REG5 and LDO_REG7 -- vcc8-supply: The input supply for LDO_REG4, LDO_REG6 and LDO_REG8 -- vcc9-supply: The input supply for LDO_REG9 and SWITCH_REG -- h_5v-supply: The input supply for HDMI_SWITCH -- usb-supply: The input supply for OTG_SWITCH - -Regulators: All the regulators of RK8XX to be instantiated shall be -listed in a child node named 'regulators'. Each regulator is represented -by a child node of the 'regulators' node. - - regulator-name { - /* standard regulator bindings here */ - }; - -Following regulators of the RK805 PMIC regulators are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK805 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 3 - -Following regulators of the RK808 PMIC block are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK808 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 8. - - SWITCH_REGn - - valid values for n are 1 to 2 - -Following regulators of the RK809 and RK817 PMIC blocks are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK809 and RK817 datasheets. - - - DCDC_REGn - - valid values for n are 1 to 5 for RK809. - - valid values for n are 1 to 4 for RK817. - - LDO_REGn - - valid values for n are 1 to 9 for RK809. - - valid values for n are 1 to 9 for RK817. - - SWITCH_REGn - - valid values for n are 1 to 2 for RK809. - - BOOST for RK817 - - OTG_SWITCH for RK817 - -Following regulators of the RK818 PMIC block are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK818 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 9. - - SWITCH_REG - - HDMI_SWITCH - - OTG_SWITCH - -It is necessary to configure three pins for both the RK809 and RK817, the three -pins are "gpio_ts" "gpio_gt" "gpio_slp". - The gpio_gt and gpio_ts pins support the gpio function. - The gpio_slp pin is for controlling the pmic states, as below: - - reset - - power down - - sleep - -Standard regulator bindings are used inside regulator subnodes. Check - Documentation/devicetree/bindings/regulator/regulator.txt -for more details - -Example: - rk808: pmic@1b { - compatible = "rockchip,rk808"; - clock-output-names = "xin32k", "rk808-clkout2"; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; - reg = <0x1b>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - - vcc8-supply = <&vcc_18>; - vcc9-supply = <&vcc_io>; - vcc10-supply = <&vcc_io>; - vcc12-supply = <&vcc_io>; - vddio-supply = <&vccio_pmu>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1300000>; - regulator-name = "vdd_arm"; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_ddr"; - }; - - vcc_io: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_io"; - }; - - vccio_pmu: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_pmu"; - }; - - vcc_tp: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_tp"; - }; - - vdd_10: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; - }; - - vcc18_lcd: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; - }; - - vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - }; - - vdd10_lcd: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_lcd"; - }; - - vcc_18: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; - }; - - vcca_codec: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcca_codec"; - }; - - vcc_wl: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_wl"; - }; - - vcc_lcd: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_lcd"; - }; - }; - }; - - rk817: pmic@20 { - compatible = "rockchip,rk817"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = ; - clock-output-names = "rk808-clkout1", "xin32k"; - clock-names = "mclk"; - clocks = <&cru SCLK_I2S1_OUT>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; - wakeup-source; - #clock-cells = <1>; - #sound-dai-cells = <0>; - - vcc1-supply = <&vccsys>; - vcc2-supply = <&vccsys>; - vcc3-supply = <&vccsys>; - vcc4-supply = <&vccsys>; - vcc5-supply = <&vccsys>; - vcc6-supply = <&vccsys>; - vcc7-supply = <&vccsys>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v3: DCDC_REG4 { - regulator-name = "vcc_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v8: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_1v0: LDO_REG3 { - regulator-name = "vdd_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc3v3_pmu: LDO_REG4 { - regulator-name = "vcc3v3_pmu"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_sd: LDO_REG6 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_bl: LDO_REG7 { - regulator-name = "vcc_bl"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_lcd: LDO_REG8 { - regulator-name = "vcc_lcd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <2800000>; - }; - }; - - vcc_cam: LDO_REG9 { - regulator-name = "vcc_cam"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - }; - - rk817_codec: codec { - rockchip,mic-in-differential; - }; - }; diff --git a/dts/Bindings/mfd/rockchip,rk805.yaml b/dts/Bindings/mfd/rockchip,rk805.yaml new file mode 100644 index 0000000000..4992f71b6f --- /dev/null +++ b/dts/Bindings/mfd/rockchip,rk805.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK805 Power Management Integrated Circuit + +maintainers: + - Chris Zhong + - Zhang Qing + +description: | + Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD + that includes multiple switchable regulators. + +properties: + compatible: + enum: + - rockchip,rk805 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + gpio-controller: true + + '#gpio-cells': + const: 2 + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc6-supply: + description: + The input supply for LDO_REG3. + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|LDO_REG[1-3])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <0>; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_18: LDO_REG1 { + regulator-name = "vdd_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc_18emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_11: LDO_REG3 { + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/rockchip,rk808.yaml b/dts/Bindings/mfd/rockchip,rk808.yaml new file mode 100644 index 0000000000..f5908fa01a --- /dev/null +++ b/dts/Bindings/mfd/rockchip,rk808.yaml @@ -0,0 +1,257 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK808 Power Management Integrated Circuit + +maintainers: + - Chris Zhong + - Zhang Qing + +description: | + Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and a power button. + +properties: + compatible: + enum: + - rockchip,rk808 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + maxItems: 2 + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc6-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc7-supply: + description: + The input supply for LDO_REG3 and LDO_REG7. + + vcc8-supply: + description: + The input supply for SWITCH_REG1. + + vcc9-supply: + description: + The input supply for LDO_REG4 and LDO_REG5. + + vcc10-supply: + description: + The input supply for LDO_REG6. + + vcc11-supply: + description: + The input supply for LDO_REG8. + + vcc12-supply: + description: + The input supply for SWITCH_REG2. + + vddio-supply: + description: + The input supply for digital IO. + + dvs-gpios: + description: | + buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for + 2 host gpio's used for dvs. The format of the gpio specifier + depends in the gpio controller. If DVS GPIOs aren't present, + voltage changes will happen very quickly with no slow ramp time. + maxItems: 2 + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + reg = <0x1b>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vccio_pmu>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd_arm"; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vccio_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_pmu"; + }; + + vcc_tp: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_tp"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_codec"; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/rockchip,rk809.yaml b/dts/Bindings/mfd/rockchip,rk809.yaml new file mode 100644 index 0000000000..7fb849ac74 --- /dev/null +++ b/dts/Bindings/mfd/rockchip,rk809.yaml @@ -0,0 +1,284 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK809 Power Management Integrated Circuit + +maintainers: + - Chris Zhong + - Zhang Qing + +description: | + Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and power button. + +properties: + compatible: + enum: + - rockchip,rk809 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: | + See for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. + + vcc6-supply: + description: + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. + + vcc7-supply: + description: + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. + + vcc8-supply: + description: + The input supply for SWITCH_REG1. + + vcc9-supply: + description: + The input supply for DCDC_REG5 and SWITCH_REG2. + + regulators: + type: object + patternProperties: + "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio3>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l_pin>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sysin>; + vcc2-supply = <&vcc_sysin>; + vcc3-supply = <&vcc_sysin>; + vcc4-supply = <&vcc_sysin>; + vcc6-supply = <&vcc_sysin>; + vcc7-supply = <&vcc_sysin>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sysin>; + vcc10-supply = <&vcc_sysin>; + vcc11-supply = <&vcc_sysin>; + vcc12-supply = <&vcc3v3_sys>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: vcc_wl: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-name = "vcc1v8_pmupll"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/rockchip,rk817.yaml b/dts/Bindings/mfd/rockchip,rk817.yaml new file mode 100644 index 0000000000..bfc1720adc --- /dev/null +++ b/dts/Bindings/mfd/rockchip,rk817.yaml @@ -0,0 +1,330 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK817 Power Management Integrated Circuit + +maintainers: + - Chris Zhong + - Zhang Qing + +description: | + Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, a power button, an audio codec, and a + battery charger manager. + +properties: + compatible: + enum: + - rockchip,rk817 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. + + vcc6-supply: + description: + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. + + vcc7-supply: + description: + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. + + vcc8-supply: + description: + The input supply for BOOST. + + vcc9-supply: + description: + The input supply for OTG_SWITCH. + + regulators: + type: object + patternProperties: + "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + clocks: + description: + The input clock for the audio codec. + + clock-names: + description: + The clock name for the codec clock. + items: + - const: mclk + + '#sound-dai-cells': + description: + Needed for the interpretation of sound dais. + const: 0 + + codec: + description: | + The child node for the codec to hold additional properties. If no + additional properties are required for the codec, this node can be + omitted. + type: object + properties: + rockchip,mic-in-differential: + type: boolean + description: + Describes if the microphone uses differential mode. + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = ; + clock-output-names = "rk808-clkout1", "xin32k"; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S1_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; + wakeup-source; + #clock-cells = <1>; + #sound-dai-cells = <0>; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vccsys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v3_pmu: LDO_REG4 { + regulator-name = "vcc3v3_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-name = "vcc_bl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-name = "vcc_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc_cam: LDO_REG9 { + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + + rk817_codec: codec { + rockchip,mic-in-differential; + }; + }; + }; diff --git a/dts/Bindings/mfd/rockchip,rk818.yaml b/dts/Bindings/mfd/rockchip,rk818.yaml new file mode 100644 index 0000000000..b57c4b005c --- /dev/null +++ b/dts/Bindings/mfd/rockchip,rk818.yaml @@ -0,0 +1,282 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk818.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK818 Power Management Integrated Circuit + +maintainers: + - Chris Zhong + - Zhang Qing + +description: | + Rockchip RK818 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and a power button. + +properties: + compatible: + enum: + - rockchip,rk818 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: | + See for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + maxItems: 2 + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + boost-supply: + description: + The input supply for DCDC_BOOST + + vcc6-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc7-supply: + description: + The input supply for LDO_REG3, LDO_REG5, and LDO_REG7. + + vcc8-supply: + description: + The input supply for LDO_REG4, LDO_REG6, and LDO_REG8. + + vcc9-supply: + description: + The input supply for LDO_REG9 and SWITCH_REG. + + vddio-supply: + description: + The input supply for digital IO. + + h_5v-supply: + description: + The input supply for HDMI_SWITCH. + + usb-supply: + description: + The input supply for OTG_SWITCH. + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk818: pmic@1c { + compatible = "rockchip,rk818"; + reg = <0x1c>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc1-supply = <&vdd_sys>; + vcc2-supply = <&vdd_sys>; + vcc3-supply = <&vdd_sys>; + vcc4-supply = <&vdd_sys>; + boost-supply = <&vdd_in_otg_out>; + vcc6-supply = <&vdd_sys>; + vcc7-supply = <&vdd_misc_1v8>; + vcc8-supply = <&vdd_misc_1v8>; + vcc9-supply = <&vdd_3v3_io>; + vddio-supply = <&vdd_3v3_io>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_3v3_io: DCDC_REG4 { + regulator-name = "vdd_3v3_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_sys: DCDC_BOOST { + regulator-name = "vdd_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <5000000>; + }; + }; + + vdd_sd: SWITCH_REG { + regulator-name = "vdd_sd"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_eth_2v5: LDO_REG2 { + regulator-name = "vdd_eth_2v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2500000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_1v8_lcd_ldo: LDO_REG4 { + regulator-name = "vdd_1v8_lcd_ldo"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0_lcd: LDO_REG6 { + regulator-name = "vdd_1v0_lcd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_1v8_ldo: LDO_REG7 { + regulator-name = "vdd_1v8_ldo"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_io_sd: LDO_REG9 { + regulator-name = "vdd_io_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml b/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml index f7bb67d10e..b97b068487 100644 --- a/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml +++ b/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml @@ -79,8 +79,8 @@ examples: clocks = <&cmu_aud CLK_ACLK_DMAC>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; + dma-channels = <8>; + dma-requests = <32>; power-domains = <&pd_aud>; }; diff --git a/dts/Bindings/mfd/syscon.yaml b/dts/Bindings/mfd/syscon.yaml index 13baa452cc..fb78404501 100644 --- a/dts/Bindings/mfd/syscon.yaml +++ b/dts/Bindings/mfd/syscon.yaml @@ -100,12 +100,4 @@ examples: compatible = "allwinner,sun8i-h3-system-controller", "syscon"; reg = <0x01c00000 0x1000>; }; - - - | - gpr: iomuxc-gpr@20e0000 { - compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; - reg = <0x020e0000 0x38>; - hwlocks = <&hwlock1 1>; - }; - ... diff --git a/dts/Bindings/mfd/wlf,arizona.yaml b/dts/Bindings/mfd/wlf,arizona.yaml index 9e762d4742..ea3337dafa 100644 --- a/dts/Bindings/mfd/wlf,arizona.yaml +++ b/dts/Bindings/mfd/wlf,arizona.yaml @@ -14,6 +14,7 @@ description: | range of analogue I/O. allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml - $ref: /schemas/sound/wlf,arizona.yaml# - $ref: /schemas/regulator/wlf,arizona.yaml# - $ref: /schemas/extcon/wlf,arizona.yaml# diff --git a/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml b/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml index dccd5ad969..b672202fff 100644 --- a/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml +++ b/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml @@ -31,7 +31,7 @@ properties: - const: brcm,sdhci-brcmstb reg: - minItems: 2 + maxItems: 2 reg-names: items: @@ -65,15 +65,15 @@ unevaluatedProperties: false examples: - | mmc@84b0000 { - sd-uhs-sdr50; - sd-uhs-ddr50; - sd-uhs-sdr104; - sdhci,auto-cmd12; compatible = "brcm,bcm7216-sdhci", "brcm,bcm7445-sdhci", "brcm,sdhci-brcmstb"; reg = <0x84b0000 0x260>, <0x84b0300 0x200>; reg-names = "host", "cfg"; + sd-uhs-sdr50; + sd-uhs-ddr50; + sd-uhs-sdr104; + sdhci,auto-cmd12; interrupts = <0x0 0x26 0x4>; interrupt-names = "sdio0_0"; clocks = <&scmi_clk 245>; @@ -81,6 +81,11 @@ examples: }; mmc@84b1000 { + compatible = "brcm,bcm7216-sdhci", + "brcm,bcm7445-sdhci", + "brcm,sdhci-brcmstb"; + reg = <0x84b1000 0x260>, <0x84b1300 0x200>; + reg-names = "host", "cfg"; mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; @@ -88,11 +93,6 @@ examples: supports-cqe; non-removable; bus-width = <0x8>; - compatible = "brcm,bcm7216-sdhci", - "brcm,bcm7445-sdhci", - "brcm,sdhci-brcmstb"; - reg = <0x84b1000 0x260>, <0x84b1300 0x200>; - reg-names = "host", "cfg"; interrupts = <0x0 0x27 0x4>; interrupt-names = "sdio1_0"; clocks = <&scmi_clk 245>; diff --git a/dts/Bindings/mmc/fsl-imx-esdhc.yaml b/dts/Bindings/mmc/fsl-imx-esdhc.yaml index 7dbbcae948..29339d0196 100644 --- a/dts/Bindings/mmc/fsl-imx-esdhc.yaml +++ b/dts/Bindings/mmc/fsl-imx-esdhc.yaml @@ -34,22 +34,47 @@ properties: - fsl,imx6ull-usdhc - fsl,imx7d-usdhc - fsl,imx7ulp-usdhc + - fsl,imx8mm-usdhc - fsl,imxrt1050-usdhc - nxp,s32g2-usdhc - items: - enum: + - fsl,imx8mq-usdhc + - const: fsl,imx7d-usdhc + - items: + - enum: + - fsl,imx8mn-usdhc + - fsl,imx8mp-usdhc + - fsl,imx93-usdhc + - fsl,imx8ulp-usdhc + - const: fsl,imx8mm-usdhc + - items: + - enum: + - fsl,imx8qm-usdhc + - const: fsl,imx8qxp-usdhc + - items: + - enum: + - fsl,imx8dxl-usdhc - fsl,imx8mm-usdhc - fsl,imx8mn-usdhc - fsl,imx8mp-usdhc - - fsl,imx8mq-usdhc - fsl,imx8qm-usdhc - fsl,imx8qxp-usdhc - const: fsl,imx7d-usdhc + deprecated: true - items: - enum: - - fsl,imx93-usdhc - - fsl,imx8ulp-usdhc + - fsl,imx8mn-usdhc + - fsl,imx8mp-usdhc - const: fsl,imx8mm-usdhc + - const: fsl,imx7d-usdhc + deprecated: true + - items: + - enum: + - fsl,imx8qm-usdhc + - const: fsl,imx8qxp-usdhc + - const: fsl,imx7d-usdhc + deprecated: true reg: maxItems: 1 diff --git a/dts/Bindings/mmc/marvell,dove-sdhci.yaml b/dts/Bindings/mmc/marvell,dove-sdhci.yaml new file mode 100644 index 0000000000..7c9c652ad5 --- /dev/null +++ b/dts/Bindings/mmc/marvell,dove-sdhci.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/marvell,dove-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell sdhci-dove controller + +maintainers: + - Adrian Hunter + - Ulf Hansson + +allOf: + - $ref: mmc-controller.yaml# + +properties: + compatible: + const: marvell,dove-sdhci + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + sdio0: mmc@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>; + clocks = <&gate_clk 9>; + }; diff --git a/dts/Bindings/mmc/marvell,orion-sdio.yaml b/dts/Bindings/mmc/marvell,orion-sdio.yaml new file mode 100644 index 0000000000..8a97ded15a --- /dev/null +++ b/dts/Bindings/mmc/marvell,orion-sdio.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/marvell,orion-sdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell orion-sdio controller + +maintainers: + - Nicolas Pitre + - Ulf Hansson + +allOf: + - $ref: mmc-controller.yaml# + +properties: + compatible: + const: marvell,orion-sdio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + mmc@d00d4000 { + compatible = "marvell,orion-sdio"; + reg = <0xd00d4000 0x200>; + interrupts = <54>; + clocks = <&gateclk 17>; + }; diff --git a/dts/Bindings/mmc/marvell,xenon-sdhci.txt b/dts/Bindings/mmc/marvell,xenon-sdhci.txt deleted file mode 100644 index c51a62d751..0000000000 --- a/dts/Bindings/mmc/marvell,xenon-sdhci.txt +++ /dev/null @@ -1,173 +0,0 @@ -Marvell Xenon SDHCI Controller device tree bindings -This file documents differences between the core mmc properties -described by mmc.txt and the properties used by the Xenon implementation. - -Multiple SDHCs might be put into a single Xenon IP, to save size and cost. -Each SDHC is independent and owns independent resources, such as register sets, -clock and PHY. -Each SDHC should have an independent device tree node. - -Required Properties: -- compatible: should be one of the following - - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SoC. - Must provide a second register area and marvell,pad-type. - - "marvell,armada-ap806-sdhci": For controllers on Armada AP806. - - "marvell,armada-ap807-sdhci": For controllers on Armada AP807. - - "marvell,armada-cp110-sdhci": For controllers on Armada CP110. - -- clocks: - Array of clocks required for SDHC. - Require at least input clock for Xenon IP core. For Armada AP806 and - CP110, the AXI clock is also mandatory. - -- clock-names: - Array of names corresponding to clocks property. - The input clock for Xenon IP core should be named as "core". - The input clock for the AXI bus must be named as "axi". - -- reg: - * For "marvell,armada-3700-sdhci", two register areas. - The first one for Xenon IP register. The second one for the Armada 3700 SoC - PHY PAD Voltage Control register. - Please follow the examples with compatible "marvell,armada-3700-sdhci" - in below. - Please also check property marvell,pad-type in below. - - * For other compatible strings, one register area for Xenon IP. - -Optional Properties: -- marvell,xenon-sdhc-id: - Indicate the corresponding bit index of current SDHC in - SDHC System Operation Control Register Bit[7:0]. - Set/clear the corresponding bit to enable/disable current SDHC. - If Xenon IP contains only one SDHC, this property is optional. - -- marvell,xenon-phy-type: - Xenon support multiple types of PHYs. - To select eMMC 5.1 PHY, set: - marvell,xenon-phy-type = "emmc 5.1 phy" - eMMC 5.1 PHY is the default choice if this property is not provided. - To select eMMC 5.0 PHY, set: - marvell,xenon-phy-type = "emmc 5.0 phy" - - All those types of PHYs can support eMMC, SD and SDIO. - Please note that this property only presents the type of PHY. - It doesn't stand for the entire SDHC type or property. - For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only - supports eMMC 5.1. - -- marvell,xenon-phy-znr: - Set PHY ZNR value. - Only available for eMMC PHY. - Valid range = [0:0x1F]. - ZNR is set as 0xF by default if this property is not provided. - -- marvell,xenon-phy-zpr: - Set PHY ZPR value. - Only available for eMMC PHY. - Valid range = [0:0x1F]. - ZPR is set as 0xF by default if this property is not provided. - -- marvell,xenon-phy-nr-success-tun: - Set the number of required consecutive successful sampling points - used to identify a valid sampling window, in tuning process. - Valid range = [1:7]. - Set as 0x4 by default if this property is not provided. - -- marvell,xenon-phy-tun-step-divider: - Set the divider for calculating TUN_STEP. - Set as 64 by default if this property is not provided. - -- marvell,xenon-phy-slow-mode: - If this property is selected, transfers will bypass PHY. - Only available when bus frequency lower than 55MHz in SDR mode. - Disabled by default. Please only try this property if timing issues - always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25, - SD Default Speed and HS mode and eMMC legacy speed mode. - -- marvell,xenon-tun-count: - Xenon SDHC SoC usually doesn't provide re-tuning counter in - Capabilities Register 3 Bit[11:8]. - This property provides the re-tuning counter. - If this property is not set, default re-tuning counter will - be set as 0x9 in driver. - -- marvell,pad-type: - Type of Armada 3700 SoC PHY PAD Voltage Controller register. - Only valid when "marvell,armada-3700-sdhci" is selected. - Two types: "sd" and "fixed-1-8v". - If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning and is - switched to 1.8V when later in higher speed mode. - If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for eMMC. - Please follow the examples with compatible "marvell,armada-3700-sdhci" - in below. - -Example: -- For eMMC: - - sdhci@aa0000 { - compatible = "marvell,armada-ap806-sdhci"; - reg = <0xaa0000 0x1000>; - interrupts = - clocks = <&emmc_clk>,<&axi_clk>; - clock-names = "core", "axi"; - bus-width = <4>; - marvell,xenon-phy-slow-mode; - marvell,xenon-tun-count = <11>; - non-removable; - no-sd; - no-sdio; - - /* Vmmc and Vqmmc are both fixed */ - }; - -- For SD/SDIO: - - sdhci@ab0000 { - compatible = "marvell,armada-cp110-sdhci"; - reg = <0xab0000 0x1000>; - interrupts = - vqmmc-supply = <&sd_vqmmc_regulator>; - vmmc-supply = <&sd_vmmc_regulator>; - clocks = <&sdclk>, <&axi_clk>; - clock-names = "core", "axi"; - bus-width = <4>; - marvell,xenon-tun-count = <9>; - }; - -- For eMMC with compatible "marvell,armada-3700-sdhci": - - sdhci@aa0000 { - compatible = "marvell,armada-3700-sdhci"; - reg = <0xaa0000 0x1000>, - ; - interrupts = - clocks = <&emmcclk>; - clock-names = "core"; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - non-removable; - no-sd; - no-sdio; - - /* Vmmc and Vqmmc are both fixed */ - - marvell,pad-type = "fixed-1-8v"; - }; - -- For SD/SDIO with compatible "marvell,armada-3700-sdhci": - - sdhci@ab0000 { - compatible = "marvell,armada-3700-sdhci"; - reg = <0xab0000 0x1000>, - ; - interrupts = - vqmmc-supply = <&sd_regulator>; - /* Vmmc is fixed */ - clocks = <&sdclk>; - clock-names = "core"; - bus-width = <4>; - - marvell,pad-type = "sd"; - }; diff --git a/dts/Bindings/mmc/marvell,xenon-sdhci.yaml b/dts/Bindings/mmc/marvell,xenon-sdhci.yaml new file mode 100644 index 0000000000..c79639e902 --- /dev/null +++ b/dts/Bindings/mmc/marvell,xenon-sdhci.yaml @@ -0,0 +1,275 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Xenon SDHCI Controller + +description: | + This file documents differences between the core MMC properties described by + mmc-controller.yaml and the properties used by the Xenon implementation. + + Multiple SDHCs might be put into a single Xenon IP, to save size and cost. + Each SDHC is independent and owns independent resources, such as register + sets, clock and PHY. + + Each SDHC should have an independent device tree node. + +maintainers: + - Ulf Hansson + +properties: + compatible: + oneOf: + - enum: + - marvell,armada-cp110-sdhci + - marvell,armada-ap806-sdhci + + - items: + - const: marvell,armada-ap807-sdhci + - const: marvell,armada-ap806-sdhci + + - items: + - const: marvell,armada-3700-sdhci + - const: marvell,sdhci-xenon + + reg: + minItems: 1 + maxItems: 2 + description: | + For "marvell,armada-3700-sdhci", two register areas. The first one + for Xenon IP register. The second one for the Armada 3700 SoC PHY PAD + Voltage Control register. Please follow the examples with compatible + "marvell,armada-3700-sdhci" in below. + Please also check property marvell,pad-type in below. + + For other compatible strings, one register area for Xenon IP. + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: axi + + marvell,xenon-sdhc-id: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + description: | + Indicate the corresponding bit index of current SDHC in SDHC System + Operation Control Register Bit[7:0]. Set/clear the corresponding bit to + enable/disable current SDHC. + + marvell,xenon-phy-type: + $ref: /schemas/types.yaml#/definitions/string + enum: + - "emmc 5.1 phy" + - "emmc 5.0 phy" + description: | + Xenon support multiple types of PHYs. To select eMMC 5.1 PHY, set: + marvell,xenon-phy-type = "emmc 5.1 phy" eMMC 5.1 PHY is the default + choice if this property is not provided. To select eMMC 5.0 PHY, set: + marvell,xenon-phy-type = "emmc 5.0 phy" + + All those types of PHYs can support eMMC, SD and SDIO. Please note that + this property only presents the type of PHY. It doesn't stand for the + entire SDHC type or property. For example, "emmc 5.1 phy" doesn't mean + that this Xenon SDHC only supports eMMC 5.1. + + marvell,xenon-phy-znr: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x1f + default: 0xf + description: | + Set PHY ZNR value. + Only available for eMMC PHY. + + marvell,xenon-phy-zpr: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x1f + default: 0xf + description: | + Set PHY ZPR value. + Only available for eMMC PHY. + + marvell,xenon-phy-nr-success-tun: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + default: 0x4 + description: | + Set the number of required consecutive successful sampling points + used to identify a valid sampling window, in tuning process. + + marvell,xenon-phy-tun-step-divider: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 64 + description: | + Set the divider for calculating TUN_STEP. + + marvell,xenon-phy-slow-mode: + type: boolean + description: | + If this property is selected, transfers will bypass PHY. + Only available when bus frequency lower than 55MHz in SDR mode. + Disabled by default. Please only try this property if timing issues + always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25, + SD Default Speed and HS mode and eMMC legacy speed mode. + + marvell,xenon-tun-count: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x9 + description: | + Xenon SDHC SoC usually doesn't provide re-tuning counter in + Capabilities Register 3 Bit[11:8]. + This property provides the re-tuning counter. + +allOf: + - $ref: mmc-controller.yaml# + - if: + properties: + compatible: + contains: + const: marvell,armada-3700-sdhci + + then: + properties: + reg: + items: + - description: Xenon IP registers + - description: Armada 3700 SoC PHY PAD Voltage Control register + minItems: 2 + + marvell,pad-type: + $ref: /schemas/types.yaml#/definitions/string + enum: + - sd + - fixed-1-8v + description: | + Type of Armada 3700 SoC PHY PAD Voltage Controller register. + If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning + and is switched to 1.8V when later in higher speed mode. + If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for + eMMC. + Please follow the examples with compatible + "marvell,armada-3700-sdhci" in below. + + required: + - marvell,pad-type + + - if: + properties: + compatible: + contains: + enum: + - marvell,armada-cp110-sdhci + - marvell,armada-ap807-sdhci + - marvell,armada-ap806-sdhci + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: core + - const: axi + + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + // For eMMC + #include + #include + + mmc@aa0000 { + compatible = "marvell,armada-ap807-sdhci", "marvell,armada-ap806-sdhci"; + reg = <0xaa0000 0x1000>; + interrupts = ; + clocks = <&emmc_clk 0>, <&axi_clk 0>; + clock-names = "core", "axi"; + bus-width = <4>; + marvell,xenon-phy-slow-mode; + marvell,xenon-tun-count = <11>; + non-removable; + no-sd; + no-sdio; + + /* Vmmc and Vqmmc are both fixed */ + }; + + - | + // For SD/SDIO + #include + #include + + mmc@ab0000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0xab0000 0x1000>; + interrupts = ; + vqmmc-supply = <&sd_vqmmc_regulator>; + vmmc-supply = <&sd_vmmc_regulator>; + clocks = <&sdclk 0>, <&axi_clk 0>; + clock-names = "core", "axi"; + bus-width = <4>; + marvell,xenon-tun-count = <9>; + }; + + - | + // For eMMC with compatible "marvell,armada-3700-sdhci": + #include + #include + + mmc@aa0000 { + compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; + reg = <0xaa0000 0x1000>, + <0x17808 0x4>; + interrupts = ; + clocks = <&emmcclk 0>; + clock-names = "core"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + + /* Vmmc and Vqmmc are both fixed */ + + marvell,pad-type = "fixed-1-8v"; + }; + + - | + // For SD/SDIO with compatible "marvell,armada-3700-sdhci": + #include + #include + + mmc@ab0000 { + compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; + reg = <0xab0000 0x1000>, + <0x17808 0x4>; + interrupts = ; + vqmmc-supply = <&sd_regulator>; + /* Vmmc is fixed */ + clocks = <&sdclk 0>; + clock-names = "core"; + bus-width = <4>; + + marvell,pad-type = "sd"; + }; diff --git a/dts/Bindings/mmc/mmc-controller.yaml b/dts/Bindings/mmc/mmc-controller.yaml index 513f3c8758..ff5ce89e51 100644 --- a/dts/Bindings/mmc/mmc-controller.yaml +++ b/dts/Bindings/mmc/mmc-controller.yaml @@ -298,7 +298,10 @@ properties: vqmmc-supply: description: - Supply for the bus IO line power + Supply for the bus IO line power, such as a level shifter. + If the level shifter is controlled by a GPIO line, this shall + be modeled as a "regulator-fixed" with a GPIO line for + switching the level shifter on/off. mmc-pwrseq: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/dts/Bindings/mmc/mtk-sd.yaml b/dts/Bindings/mmc/mtk-sd.yaml index 297ada03e3..2a2e9fa8c1 100644 --- a/dts/Bindings/mmc/mtk-sd.yaml +++ b/dts/Bindings/mmc/mtk-sd.yaml @@ -40,7 +40,10 @@ properties: - const: mediatek,mt8183-mmc reg: - maxItems: 1 + minItems: 1 + items: + - description: base register (required). + - description: top base register (required for MT8183). clocks: description: @@ -168,6 +171,16 @@ required: - vmmc-supply - vqmmc-supply +if: + properties: + compatible: + contains: + const: mediatek,mt8183-mmc +then: + properties: + reg: + minItems: 2 + unevaluatedProperties: false examples: diff --git a/dts/Bindings/mmc/orion-sdio.txt b/dts/Bindings/mmc/orion-sdio.txt deleted file mode 100644 index 10f0818a34..0000000000 --- a/dts/Bindings/mmc/orion-sdio.txt +++ /dev/null @@ -1,16 +0,0 @@ -* Marvell orion-sdio controller - -This file documents differences between the core properties in mmc.txt -and the properties used by the orion-sdio driver. - -- compatible: Should be "marvell,orion-sdio" -- clocks: reference to the clock of the SDIO interface - -Example: - - mvsdio@d00d4000 { - compatible = "marvell,orion-sdio"; - reg = <0xd00d4000 0x200>; - interrupts = <54>; - clocks = <&gateclk 17>; - }; diff --git a/dts/Bindings/mmc/sdhci-am654.yaml b/dts/Bindings/mmc/sdhci-am654.yaml index 0566493c4d..0ab07759b4 100644 --- a/dts/Bindings/mmc/sdhci-am654.yaml +++ b/dts/Bindings/mmc/sdhci-am654.yaml @@ -186,6 +186,13 @@ properties: description: Clock Delay Buffer Select $ref: "/schemas/types.yaml#/definitions/uint32" + ti,fails-without-test-cd: + $ref: /schemas/types.yaml#/definitions/flag + description: + When present, indicates that the CD line is not connected + and the controller is required to be forced into Test mode + to set the TESTCD bit. + required: - compatible - reg diff --git a/dts/Bindings/mmc/sdhci-dove.txt b/dts/Bindings/mmc/sdhci-dove.txt deleted file mode 100644 index ae9aab9abc..0000000000 --- a/dts/Bindings/mmc/sdhci-dove.txt +++ /dev/null @@ -1,14 +0,0 @@ -* Marvell sdhci-dove controller - -This file documents differences between the core properties in mmc.txt -and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers. - -- compatible: Should be "marvell,dove-sdhci". - -Example: - -sdio0: sdio@92000 { - compatible = "marvell,dove-sdhci"; - reg = <0x92000 0x100>; - interrupts = <35>; -}; diff --git a/dts/Bindings/mmc/sdhci-msm.txt b/dts/Bindings/mmc/sdhci-msm.txt deleted file mode 100644 index 6216ed7773..0000000000 --- a/dts/Bindings/mmc/sdhci-msm.txt +++ /dev/null @@ -1,123 +0,0 @@ -* Qualcomm SDHCI controller (sdhci-msm) - -This file documents differences between the core properties in mmc.txt -and the properties used by the sdhci-msm driver. - -Required properties: -- compatible: Should contain a SoC-specific string and a IP version string: - version strings: - "qcom,sdhci-msm-v4" for sdcc versions less than 5.0 - "qcom,sdhci-msm-v5" for sdcc version 5.0 - For SDCC version 5.0.0, MCI registers are removed from SDCC - interface and some registers are moved to HC. New compatible - string is added to support this change - "qcom,sdhci-msm-v5". - full compatible strings with SoC and version: - "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4" - "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4" - "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4" - "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4" - "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4" - "qcom,msm8992-sdhci", "qcom,sdhci-msm-v4" - "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4" - "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4" - "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5" - "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; - "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; - "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5" - "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5"; - "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5" - NOTE that some old device tree files may be floating around that only - have the string "qcom,sdhci-msm-v4" without the SoC compatible string - but doing that should be considered a deprecated practice. - -- reg: Base address and length of the register in the following order: - - Host controller register map (required) - - SD Core register map (required for controllers earlier than msm-v5) - - CQE register map (Optional, CQE support is present on SDHC instance meant - for eMMC and version v4.2 and above) - - Inline Crypto Engine register map (optional) -- reg-names: When CQE register map is supplied, below reg-names are required - - "hc" for Host controller register map - - "core" for SD core register map - - "cqhci" for CQE register map - - "ice" for Inline Crypto Engine register map (optional) -- interrupts: Should contain an interrupt-specifiers for the interrupts: - - Host controller interrupt (required) -- pinctrl-names: Should contain only one value - "default". -- pinctrl-0: Should specify pin control groups used for this controller. -- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names. -- clock-names: Should contain the following: - "iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required) - "core" - SDC MMC clock (MCLK) (required) - "bus" - SDCC bus voter clock (optional) - "xo" - TCXO clock (optional) - "cal" - reference clock for RCLK delay calibration (optional) - "sleep" - sleep clock for RCLK delay calibration (optional) - "ice" - clock for Inline Crypto Engine (optional) - -- qcom,ddr-config: Certain chipsets and platforms require particular settings - for the DDR_CONFIG register. Use this field to specify the register - value as per the Hardware Programming Guide. - -- qcom,dll-config: Chipset and Platform specific value. Use this field to - specify the DLL_CONFIG register value as per Hardware Programming Guide. - -Optional Properties: -* Following bus parameters are required for interconnect bandwidth scaling: -- interconnects: Pairs of phandles and interconnect provider specifier - to denote the edge source and destination ports of - the interconnect path. - -- interconnect-names: For sdhc, we have two main paths. - 1. Data path : sdhc to ddr - 2. Config path : cpu to sdhc - For Data interconnect path the name supposed to be - is "sdhc-ddr" and for config interconnect path it is - "cpu-sdhc". - Please refer to Documentation/devicetree/bindings/ - interconnect/ for more details. - -Example: - - sdhc_1: sdhci@f9824900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; - interrupts = <0 123 0>; - bus-width = <8>; - non-removable; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>; - - clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; - clock-names = "core", "iface"; - interconnects = <&qnoc MASTER_SDCC_ID &qnoc SLAVE_DDR_ID>, - <&qnoc MASTER_CPU_ID &qnoc SLAVE_SDCC_ID>; - interconnect-names = "sdhc-ddr","cpu-sdhc"; - - qcom,dll-config = <0x000f642c>; - qcom,ddr-config = <0x80040868>; - }; - - sdhc_2: sdhci@f98a4900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - interrupts = <0 125 0>; - bus-width = <4>; - cd-gpios = <&msmgpio 62 0x1>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>; - - clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; - clock-names = "core", "iface"; - - qcom,dll-config = <0x0007642c>; - qcom,ddr-config = <0x80040868>; - }; diff --git a/dts/Bindings/mmc/sdhci-msm.yaml b/dts/Bindings/mmc/sdhci-msm.yaml new file mode 100644 index 0000000000..e4236334e7 --- /dev/null +++ b/dts/Bindings/mmc/sdhci-msm.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mmc/sdhci-msm.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm SDHCI controller (sdhci-msm) + +maintainers: + - Bhupesh Sharma + +description: + Secure Digital Host Controller Interface (SDHCI) present on + Qualcomm SOCs supports SD/MMC/SDIO devices. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,apq8084-sdhci + - qcom,msm8226-sdhci + - qcom,msm8953-sdhci + - qcom,msm8974-sdhci + - qcom,msm8916-sdhci + - qcom,msm8992-sdhci + - qcom,msm8994-sdhci + - qcom,msm8996-sdhci + - qcom,qcs404-sdhci + - qcom,sc7180-sdhci + - qcom,sc7280-sdhci + - qcom,sdm630-sdhci + - qcom,sdm845-sdhci + - qcom,sdx55-sdhci + - qcom,sdx65-sdhci + - qcom,sm6125-sdhci + - qcom,sm6350-sdhci + - qcom,sm8150-sdhci + - qcom,sm8250-sdhci + - enum: + - qcom,sdhci-msm-v4 # for sdcc versions less than 5.0 + - qcom,sdhci-msm-v5 # for sdcc version 5.0 + - items: + - const: qcom,sdhci-msm-v4 # Deprecated (only for backward compatibility) + # for sdcc versions less than 5.0 + + reg: + minItems: 1 + items: + - description: Host controller register map + - description: SD Core register map + - description: CQE register map + - description: Inline Crypto Engine register map + + clocks: + minItems: 3 + items: + - description: Main peripheral bus clock, PCLK/HCLK - AHB Bus clock + - description: SDC MMC clock, MCLK + - description: TCXO clock + - description: clock for Inline Crypto Engine + - description: SDCC bus voter clock + - description: reference clock for RCLK delay calibration + - description: sleep clock for RCLK delay calibration + + clock-names: + minItems: 2 + items: + - const: iface + - const: core + - const: xo + - const: ice + - const: bus + - const: cal + - const: sleep + + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: hc_irq + - const: pwr_irq + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + pinctrl-0: + description: + Should specify pin control groups used for this controller. + + qcom,ddr-config: + $ref: /schemas/types.yaml#/definitions/uint32 + description: platform specific settings for DDR_CONFIG reg. + + qcom,dll-config: + $ref: /schemas/types.yaml#/definitions/uint32 + description: platform specific settings for DLL_CONFIG reg. + + iommus: + minItems: 1 + maxItems: 8 + description: | + phandle to apps_smmu node with sid mask. + + interconnects: + items: + - description: data path, sdhc to ddr + - description: config path, cpu to sdhc + + interconnect-names: + items: + - const: sdhc-ddr + - const: cpu-sdhc + + power-domains: + description: A phandle to sdhci power domain node + maxItems: 1 + +patternProperties: + '^opp-table(-[a-z0-9]+)?$': + if: + properties: + compatible: + const: operating-points-v2 + then: + patternProperties: + '^opp-?[0-9]+$': + required: + - required-opps + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: true + +examples: + - | + #include + #include + #include + #include + + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x4a0 0x0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd SM8250_CX>; + + operating-points-v2 = <&sdhc2_opp_table>; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; diff --git a/dts/Bindings/mmc/snps,dwcmshc-sdhci.yaml b/dts/Bindings/mmc/snps,dwcmshc-sdhci.yaml index f300ced4cd..71f8e726d6 100644 --- a/dts/Bindings/mmc/snps,dwcmshc-sdhci.yaml +++ b/dts/Bindings/mmc/snps,dwcmshc-sdhci.yaml @@ -17,6 +17,7 @@ properties: compatible: enum: - rockchip,rk3568-dwcmshc + - rockchip,rk3588-dwcmshc - snps,dwcmshc-sdhci reg: diff --git a/dts/Bindings/mtd/aspeed-smc.txt b/dts/Bindings/mtd/aspeed-smc.txt deleted file mode 100644 index 49f6528ef5..0000000000 --- a/dts/Bindings/mtd/aspeed-smc.txt +++ /dev/null @@ -1,51 +0,0 @@ -* Aspeed Firmware Memory controller -* Aspeed SPI Flash Memory Controller - -The Firmware Memory Controller in the Aspeed AST2500 SoC supports -three chip selects, two of which are always of SPI type and the third -can be SPI or NOR type flash. These bindings only describe SPI. - -The two SPI flash memory controllers in the AST2500 each support two -chip selects. - -Required properties: - - compatible : Should be one of - "aspeed,ast2400-fmc" for the AST2400 Firmware Memory Controller - "aspeed,ast2400-spi" for the AST2400 SPI Flash memory Controller - "aspeed,ast2500-fmc" for the AST2500 Firmware Memory Controller - "aspeed,ast2500-spi" for the AST2500 SPI flash memory controllers - - - reg : the first contains the control register location and length, - the second contains the memory window mapping address and length - - #address-cells : must be 1 corresponding to chip select child binding - - #size-cells : must be 0 corresponding to chip select child binding - -Optional properties: - - interrupts : Should contain the interrupt for the dma device if an - FMC - -The child nodes are the SPI flash modules which must have a compatible -property as specified in bindings/mtd/jedec,spi-nor.txt - -Optionally, the child node can contain properties for SPI mode (may be -ignored): - - spi-max-frequency - max frequency of spi bus - - -Example: -fmc: fmc@1e620000 { - compatible = "aspeed,ast2500-fmc"; - reg = < 0x1e620000 0x94 - 0x20000000 0x02000000 >; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <19>; - flash@0 { - reg = < 0 >; - compatible = "jedec,spi-nor"; - /* spi-max-frequency = <>; */ - /* m25p,fast-read; */ - #address-cells = <1>; - #size-cells = <1>; - }; -}; diff --git a/dts/Bindings/mtd/common.txt b/dts/Bindings/mtd/common.txt deleted file mode 100644 index ae16f9ea86..0000000000 --- a/dts/Bindings/mtd/common.txt +++ /dev/null @@ -1 +0,0 @@ -This file has been moved to mtd.yaml. diff --git a/dts/Bindings/mtd/elm.txt b/dts/Bindings/mtd/elm.txt deleted file mode 100644 index 59ddc61c10..0000000000 --- a/dts/Bindings/mtd/elm.txt +++ /dev/null @@ -1,16 +0,0 @@ -Error location module - -Required properties: -- compatible: Must be "ti,am3352-elm" -- reg: physical base address and size of the registers map. -- interrupts: Interrupt number for the elm. - -Optional properties: -- ti,hwmods: Name of the hwmod associated to the elm - -Example: -elm: elm@0 { - compatible = "ti,am3352-elm"; - reg = <0x48080000 0x2000>; - interrupts = <4>; -}; diff --git a/dts/Bindings/mtd/hisilicon,fmc-spi-nor.txt b/dts/Bindings/mtd/hisilicon,fmc-spi-nor.txt index 74981520d6..a99de13c7c 100644 --- a/dts/Bindings/mtd/hisilicon,fmc-spi-nor.txt +++ b/dts/Bindings/mtd/hisilicon,fmc-spi-nor.txt @@ -17,7 +17,7 @@ spi-nor-controller@10000000 { reg = <0x10000000 0x1000>, <0x14000000 0x1000000>; reg-names = "control", "memory"; clocks = <&clock HI3519_FMC_CLK>; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; }; diff --git a/dts/Bindings/mtd/ingenic,nand.yaml b/dts/Bindings/mtd/ingenic,nand.yaml index 9de8ef6e59..8c272c842b 100644 --- a/dts/Bindings/mtd/ingenic,nand.yaml +++ b/dts/Bindings/mtd/ingenic,nand.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: nand-controller.yaml# + - $ref: /schemas/memory-controllers/ingenic,nemc-peripherals.yaml# properties: compatible: diff --git a/dts/Bindings/mtd/jedec,spi-nor.yaml b/dts/Bindings/mtd/jedec,spi-nor.yaml index 4abfb4cfc1..7149784a36 100644 --- a/dts/Bindings/mtd/jedec,spi-nor.yaml +++ b/dts/Bindings/mtd/jedec,spi-nor.yaml @@ -50,10 +50,6 @@ properties: minItems: 1 maxItems: 2 - spi-max-frequency: true - spi-rx-bus-width: true - spi-tx-bus-width: true - m25p,fast-read: type: boolean description: @@ -74,8 +70,6 @@ properties: be used on such systems, to denote the absence of a reliable reset mechanism. - label: true - partitions: type: object @@ -99,8 +93,6 @@ examples: #size-cells = <0>; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "spansion,m25p80", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/dts/Bindings/mtd/partitions/fixed-partitions.yaml b/dts/Bindings/mtd/partitions/fixed-partitions.yaml index ea4cace6a9..ad3ccd2508 100644 --- a/dts/Bindings/mtd/partitions/fixed-partitions.yaml +++ b/dts/Bindings/mtd/partitions/fixed-partitions.yaml @@ -19,7 +19,11 @@ maintainers: properties: compatible: - const: fixed-partitions + oneOf: + - const: fixed-partitions + - items: + - const: sercomm,sc-partitions + - const: fixed-partitions "#address-cells": true @@ -27,7 +31,24 @@ properties: patternProperties: "@[0-9a-f]+$": - $ref: "partition.yaml#" + allOf: + - $ref: "partition.yaml#" + - if: + properties: + compatible: + contains: + const: sercomm,sc-partitions + then: + properties: + sercomm,scpart-id: + description: Partition id in Sercomm partition map. Mtd + parser uses this id to find a record in the partition map + containing offset and size of the current partition. The + values from partition map overrides partition offset and + size defined in reg property of the dts. Frequently these + values are the same, but may differ if device has bad + eraseblocks on a flash. + $ref: /schemas/types.yaml#/definitions/uint32 required: - "#address-cells" @@ -52,6 +73,7 @@ examples: reg = <0x0100000 0x200000>; }; }; + - | partitions { compatible = "fixed-partitions"; @@ -64,6 +86,7 @@ examples: reg = <0x00000000 0x1 0x00000000>; }; }; + - | partitions { compatible = "fixed-partitions"; @@ -82,6 +105,7 @@ examples: reg = <0x2 0x00000000 0x1 0x00000000>; }; }; + - | partitions { compatible = "fixed-partitions"; @@ -119,3 +143,30 @@ examples: }; }; }; + + - | + partitions { + compatible = "sercomm,sc-partitions", "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + sercomm,scpart-id = <0>; + read-only; + }; + + partition@100000 { + label = "dynamic partition map"; + reg = <0x100000 0x100000>; + sercomm,scpart-id = <1>; + }; + + partition@200000 { + label = "Factory"; + reg = <0x200000 0x100000>; + sercomm,scpart-id = <2>; + read-only; + }; + }; diff --git a/dts/Bindings/mtd/renesas-nandc.yaml b/dts/Bindings/mtd/renesas-nandc.yaml index 2870d36361..7b18bc5cc8 100644 --- a/dts/Bindings/mtd/renesas-nandc.yaml +++ b/dts/Bindings/mtd/renesas-nandc.yaml @@ -36,11 +36,15 @@ properties: - const: hclk - const: eclk + power-domains: + maxItems: 1 + required: - compatible - reg - clocks - clock-names + - power-domains - interrupts unevaluatedProperties: false @@ -56,6 +60,7 @@ examples: interrupts = ; clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>; clock-names = "hclk", "eclk"; + power-domains = <&sysctrl>; #address-cells = <1>; #size-cells = <0>; }; diff --git a/dts/Bindings/mtd/spi-nand.yaml b/dts/Bindings/mtd/spi-nand.yaml index 431faac518..dd3cd1d530 100644 --- a/dts/Bindings/mtd/spi-nand.yaml +++ b/dts/Bindings/mtd/spi-nand.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: "nand-chip.yaml#" + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: diff --git a/dts/Bindings/mtd/ti,elm.yaml b/dts/Bindings/mtd/ti,elm.yaml new file mode 100644 index 0000000000..87128c0045 --- /dev/null +++ b/dts/Bindings/mtd/ti,elm.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/ti,elm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments Error Location Module (ELM). + +maintainers: + - Roger Quadros + +description: + ELM module is used together with GPMC and NAND Flash to detect + errors and the location of the error based on BCH algorithms + so they can be corrected if possible. + +properties: + compatible: + enum: + - ti,am3352-elm + - ti,am64-elm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: Functional clock. + + clock-names: + items: + - const: fck + + power-domains: + maxItems: 1 + + ti,hwmods: + description: + Name of the HWMOD associated with ELM. This is for legacy + platforms only. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + +required: + - compatible + - reg + - interrupts + +allOf: + - if: + properties: + compatible: + contains: + const: ti,am64-elm + then: + required: + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + elm: ecc@0 { + compatible = "ti,am3352-elm"; + reg = <0x0 0x2000>; + interrupts = <4>; + }; diff --git a/dts/Bindings/mux/reg-mux.yaml b/dts/Bindings/mux/reg-mux.yaml index 60d5746eb3..dfd9ea582b 100644 --- a/dts/Bindings/mux/reg-mux.yaml +++ b/dts/Bindings/mux/reg-mux.yaml @@ -25,8 +25,12 @@ properties: const: 1 mux-reg-masks: - description: an array of register offset and pre-shifted bitfield mask - pairs, each describing a single mux control. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: register offset + - description: pre-shifted bitfield mask + description: Each entry pair describes a single mux control. idle-states: true @@ -96,7 +100,6 @@ examples: #include syscon@1000 { - compatible = "fsl,imx7d-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd"; reg = <0x1000 0x100>; mux2: mux-controller { diff --git a/dts/Bindings/net/adi,adin.yaml b/dts/Bindings/net/adi,adin.yaml index 1129f2b58e..929cf8c0b0 100644 --- a/dts/Bindings/net/adi,adin.yaml +++ b/dts/Bindings/net/adi,adin.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices ADIN1200/ADIN1300 PHY maintainers: - - Alexandru Ardelean + - Alexandru Tachici description: | Bindings for Analog Devices Industrial Ethernet PHYs @@ -36,6 +36,22 @@ properties: enum: [ 4, 8, 12, 16, 20, 24 ] default: 8 + adi,phy-output-clock: + description: | + Select clock output on GP_CLK pin. Two clocks are available: + A 25MHz reference and a free-running 125MHz. + The phy can alternatively automatically switch between the reference and + the 125MHz clocks based on its internal state. + $ref: /schemas/types.yaml#/definitions/string + enum: + - 25mhz-reference + - 125mhz-free-running + - adaptive-free-running + + adi,phy-output-reference-clock: + description: Enable 25MHz reference clock output on CLK25_REF pin. + type: boolean + unevaluatedProperties: false examples: diff --git a/dts/Bindings/net/asix,ax88178.yaml b/dts/Bindings/net/asix,ax88178.yaml new file mode 100644 index 0000000000..1af52358de --- /dev/null +++ b/dts/Bindings/net/asix,ax88178.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/asix,ax88178.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The device tree bindings for the USB Ethernet controllers + +maintainers: + - Oleksij Rempel + +description: | + Device tree properties for hard wired USB Ethernet devices. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + items: + - enum: + - usbb95,1720 # ASIX AX88172 + - usbb95,172a # ASIX AX88172A + - usbb95,1780 # ASIX AX88178 + - usbb95,7720 # ASIX AX88772 + - usbb95,772a # ASIX AX88772A + - usbb95,772b # ASIX AX88772B + - usbb95,7e2b # ASIX AX88772B + + reg: true + local-mac-address: true + mac-address: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + usb { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usbb95,7e2b"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; + }; + - | + usb { + #address-cells = <1>; + #size-cells = <0>; + + usb1@1 { + compatible = "usb1234,5678"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usbb95,772b"; + reg = <1>; + }; + }; + }; diff --git a/dts/Bindings/net/aspeed,ast2600-mdio.yaml b/dts/Bindings/net/aspeed,ast2600-mdio.yaml index 1c88820cbc..f81eda8cb0 100644 --- a/dts/Bindings/net/aspeed,ast2600-mdio.yaml +++ b/dts/Bindings/net/aspeed,ast2600-mdio.yaml @@ -20,10 +20,14 @@ allOf: properties: compatible: const: aspeed,ast2600-mdio + reg: maxItems: 1 description: The register range of the MDIO controller instance + resets: + maxItems: 1 + required: - compatible - reg @@ -34,11 +38,13 @@ unevaluatedProperties: false examples: - | + #include mdio0: mdio@1e650000 { compatible = "aspeed,ast2600-mdio"; reg = <0x1e650000 0x8>; #address-cells = <1>; #size-cells = <0>; + resets = <&syscon ASPEED_RESET_MII>; ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/dts/Bindings/net/can/ctu,ctucanfd.yaml b/dts/Bindings/net/can/ctu,ctucanfd.yaml new file mode 100644 index 0000000000..4635cb96fc --- /dev/null +++ b/dts/Bindings/net/can/ctu,ctucanfd.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/ctu,ctucanfd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CTU CAN FD Open-source IP Core Device Tree Bindings + +description: | + Open-source CAN FD IP core developed at the Czech Technical University in Prague + + The core sources and documentation on project page + [1] sources : https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core + [2] datasheet : https://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/doc/Datasheet.pdf + + Integration in Xilinx Zynq SoC based system together with + OpenCores SJA1000 compatible controllers + [3] project : https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top + Martin Jerabek dimploma thesis with integration and testing + framework description + [4] PDF : https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf + +maintainers: + - Pavel Pisa + - Ondrej Ille + - Martin Jerabek + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - const: ctu,ctucanfd-2 + - const: ctu,ctucanfd + - const: ctu,ctucanfd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: | + phandle of reference clock (100 MHz is appropriate + for FPGA implementation on Zynq-7000 system). + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + ctu_can_fd_0: can@43c30000 { + compatible = "ctu,ctucanfd"; + interrupts = <0 30 4>; + clocks = <&clkc 15>; + reg = <0x43c30000 0x10000>; + }; diff --git a/dts/Bindings/net/can/microchip,mcp251xfd.yaml b/dts/Bindings/net/can/microchip,mcp251xfd.yaml index b3826af6bd..7a73057707 100644 --- a/dts/Bindings/net/can/microchip,mcp251xfd.yaml +++ b/dts/Bindings/net/can/microchip,mcp251xfd.yaml @@ -5,8 +5,8 @@ $id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: - Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree - bindings + Microchip MCP2517FD, MCP2518FD and MCP251863 stand-alone CAN + controller device tree bindings maintainers: - Marc Kleine-Budde @@ -17,13 +17,14 @@ allOf: properties: compatible: oneOf: - - const: microchip,mcp2517fd - description: for MCP2517FD - - const: microchip,mcp2518fd - description: for MCP2518FD - - const: microchip,mcp251xfd - description: to autodetect chip variant - + - enum: + - microchip,mcp2517fd + - microchip,mcp2518fd + - microchip,mcp251xfd + - items: + - enum: + - microchip,mcp251863 + - const: microchip,mcp2518fd reg: maxItems: 1 diff --git a/dts/Bindings/net/can/renesas,rcar-canfd.yaml b/dts/Bindings/net/can/renesas,rcar-canfd.yaml index f98c53dc18..6f71fc96bc 100644 --- a/dts/Bindings/net/can/renesas,rcar-canfd.yaml +++ b/dts/Bindings/net/can/renesas,rcar-canfd.yaml @@ -23,6 +23,7 @@ properties: - renesas,r8a774e1-canfd # RZ/G2H - renesas,r8a7795-canfd # R-Car H3 - renesas,r8a7796-canfd # R-Car M3-W + - renesas,r8a77961-canfd # R-Car M3-W+ - renesas,r8a77965-canfd # R-Car M3-N - renesas,r8a77970-canfd # R-Car V3M - renesas,r8a77980-canfd # R-Car V3H @@ -32,6 +33,7 @@ properties: - items: - enum: + - renesas,r9a07g043-canfd # RZ/G2UL - renesas,r9a07g044-canfd # RZ/G2{L,LC} - renesas,r9a07g054-canfd # RZ/V2L - const: renesas,rzg2l-canfd # RZ/G2L family @@ -86,6 +88,7 @@ required: - compatible - reg - interrupts + - interrupt-names - clocks - clock-names - power-domains @@ -134,7 +137,6 @@ then: - const: rstc_n required: - - interrupt-names - reset-names else: properties: @@ -165,6 +167,7 @@ examples: reg = <0xe66c0000 0x8000>; interrupts = , ; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A7795_CLK_CANFD>, <&can_clk>; diff --git a/dts/Bindings/net/cdns,macb.yaml b/dts/Bindings/net/cdns,macb.yaml index 6cd3d853dc..86fc31c2d9 100644 --- a/dts/Bindings/net/cdns,macb.yaml +++ b/dts/Bindings/net/cdns,macb.yaml @@ -84,13 +84,6 @@ properties: phys: maxItems: 1 - phy-names: - const: sgmii-phy - description: - Required with ZynqMP SoC when in SGMII mode. - Should reference PS-GTR generic PHY device for this controller - instance. See ZynqMP example. - resets: maxItems: 1 description: @@ -129,6 +122,7 @@ patternProperties: reset-gpios: true magic-packet: + type: boolean description: Indicates that the hardware supports waking up via magic packet. @@ -197,14 +191,12 @@ examples: clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; #size-cells = <0>; - #stream-id-cells = <1>; iommus = <&smmu 0x875>; power-domains = <&zynqmp_firmware PD_ETH_1>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; reset-names = "gem1_rst"; status = "okay"; phy-mode = "sgmii"; - phy-names = "sgmii-phy"; phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>; fixed-link { speed = <1000>; diff --git a/dts/Bindings/net/dsa/brcm,b53.yaml b/dts/Bindings/net/dsa/brcm,b53.yaml index c3c938893a..23114d691d 100644 --- a/dts/Bindings/net/dsa/brcm,b53.yaml +++ b/dts/Bindings/net/dsa/brcm,b53.yaml @@ -6,9 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Broadcom BCM53xx Ethernet switches -allOf: - - $ref: dsa.yaml# - maintainers: - Florian Fainelli @@ -68,53 +65,71 @@ required: - compatible - reg -# BCM585xx/586xx/88312 SoCs -if: - properties: - compatible: - contains: - enum: - - brcm,bcm58522-srab - - brcm,bcm58523-srab - - brcm,bcm58525-srab - - brcm,bcm58622-srab - - brcm,bcm58623-srab - - brcm,bcm58625-srab - - brcm,bcm88312-srab -then: - properties: - reg: - minItems: 3 - maxItems: 3 - reg-names: - items: - - const: srab - - const: mux_config - - const: sgmii_config - interrupts: - minItems: 13 - maxItems: 13 - interrupt-names: - items: - - const: link_state_p0 - - const: link_state_p1 - - const: link_state_p2 - - const: link_state_p3 - - const: link_state_p4 - - const: link_state_p5 - - const: link_state_p7 - - const: link_state_p8 - - const: phy - - const: ts - - const: imp_sleep_timer_p5 - - const: imp_sleep_timer_p7 - - const: imp_sleep_timer_p8 - required: - - interrupts -else: - properties: - reg: - maxItems: 1 +allOf: + - $ref: dsa.yaml# + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm5325 + - brcm,bcm53115 + - brcm,bcm53125 + - brcm,bcm53128 + - brcm,bcm5365 + - brcm,bcm5395 + - brcm,bcm5397 + - brcm,bcm5398 + then: + $ref: /schemas/spi/spi-peripheral-props.yaml + + # BCM585xx/586xx/88312 SoCs + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm58522-srab + - brcm,bcm58523-srab + - brcm,bcm58525-srab + - brcm,bcm58622-srab + - brcm,bcm58623-srab + - brcm,bcm58625-srab + - brcm,bcm88312-srab + then: + properties: + reg: + minItems: 3 + maxItems: 3 + reg-names: + items: + - const: srab + - const: mux_config + - const: sgmii_config + interrupts: + minItems: 13 + maxItems: 13 + interrupt-names: + items: + - const: link_state_p0 + - const: link_state_p1 + - const: link_state_p2 + - const: link_state_p3 + - const: link_state_p4 + - const: link_state_p5 + - const: link_state_p7 + - const: link_state_p8 + - const: phy + - const: ts + - const: imp_sleep_timer_p5 + - const: imp_sleep_timer_p7 + - const: imp_sleep_timer_p8 + required: + - interrupts + else: + properties: + reg: + maxItems: 1 unevaluatedProperties: false diff --git a/dts/Bindings/net/dsa/microchip,ksz.yaml b/dts/Bindings/net/dsa/microchip,ksz.yaml index 184152087b..6bbd8145b6 100644 --- a/dts/Bindings/net/dsa/microchip,ksz.yaml +++ b/dts/Bindings/net/dsa/microchip,ksz.yaml @@ -12,6 +12,7 @@ maintainers: allOf: - $ref: dsa.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional diff --git a/dts/Bindings/net/dsa/nxp,sja1105.yaml b/dts/Bindings/net/dsa/nxp,sja1105.yaml index 1ea0bd4904..1e26d876d1 100644 --- a/dts/Bindings/net/dsa/nxp,sja1105.yaml +++ b/dts/Bindings/net/dsa/nxp,sja1105.yaml @@ -14,6 +14,7 @@ description: allOf: - $ref: "dsa.yaml#" + - $ref: /schemas/spi/spi-peripheral-props.yaml# maintainers: - Vladimir Oltean diff --git a/dts/Bindings/net/dsa/realtek.yaml b/dts/Bindings/net/dsa/realtek.yaml index 99ee4b5b93..4f99aff029 100644 --- a/dts/Bindings/net/dsa/realtek.yaml +++ b/dts/Bindings/net/dsa/realtek.yaml @@ -108,6 +108,7 @@ if: - reg then: + $ref: /schemas/spi/spi-peripheral-props.yaml# not: required: - mdc-gpios diff --git a/dts/Bindings/net/ethernet-phy.yaml b/dts/Bindings/net/ethernet-phy.yaml index ee42328a10..ed1415a438 100644 --- a/dts/Bindings/net/ethernet-phy.yaml +++ b/dts/Bindings/net/ethernet-phy.yaml @@ -77,6 +77,15 @@ properties: description: Maximum PHY supported speed in Mbits / seconds. + phy-10base-t1l-2.4vpp: + description: | + tristate, request/disable 2.4 Vpp operating mode. The values are: + 0: Disable 2.4 Vpp operating mode. + 1: Request 2.4 Vpp operating mode from link partner. + Absence of this property will leave configuration to default values. + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1] + broken-turn-around: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/dts/Bindings/net/ingenic,mac.yaml b/dts/Bindings/net/ingenic,mac.yaml index 8e52b2e683..93b3e991d2 100644 --- a/dts/Bindings/net/ingenic,mac.yaml +++ b/dts/Bindings/net/ingenic,mac.yaml @@ -37,6 +37,7 @@ properties: const: stmmaceth mode-reg: + $ref: /schemas/types.yaml#/definitions/phandle description: An extra syscon register that control ethernet interface and timing delay rx-clk-delay-ps: diff --git a/dts/Bindings/net/marvell,orion-mdio.yaml b/dts/Bindings/net/marvell,orion-mdio.yaml new file mode 100644 index 0000000000..d2906b4a0f --- /dev/null +++ b/dts/Bindings/net/marvell,orion-mdio.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,orion-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MDIO Ethernet Controller interface + +maintainers: + - Andrew Lunn + +description: | + The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, MV78xx0, + Armada 370, Armada XP, Armada 7k and Armada 8k have an identical unit that + provides an interface with the MDIO bus. Additionally, Armada 7k and Armada + 8k has a second unit which provides an interface with the xMDIO bus. This + driver handles these interfaces. + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + enum: + - marvell,orion-mdio + - marvell,xmdio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mdio@d0072004 { + compatible = "marvell,orion-mdio"; + reg = <0xd0072004 0x4>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <30>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; diff --git a/dts/Bindings/net/marvell-orion-mdio.txt b/dts/Bindings/net/marvell-orion-mdio.txt deleted file mode 100644 index 3f3cfc1d8d..0000000000 --- a/dts/Bindings/net/marvell-orion-mdio.txt +++ /dev/null @@ -1,54 +0,0 @@ -* Marvell MDIO Ethernet Controller interface - -The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, -MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an -identical unit that provides an interface with the MDIO bus. -Additionally, Armada 7k and Armada 8k has a second unit which -provides an interface with the xMDIO bus. This driver handles -these interfaces. - -Required properties: -- compatible: "marvell,orion-mdio" or "marvell,xmdio" -- reg: address and length of the MDIO registers. When an interrupt is - not present, the length is the size of the SMI register (4 bytes) - otherwise it must be 0x84 bytes to cover the interrupt control - registers. - -Optional properties: -- interrupts: interrupt line number for the SMI error/done interrupt -- clocks: phandle for up to four required clocks for the MDIO instance - -The child nodes of the MDIO driver are the individual PHY devices -connected to this MDIO bus. They must have a "reg" property given the -PHY address on the MDIO bus. - -Example at the SoC level without an interrupt property: - -mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0xd0072004 0x4>; -}; - -Example with an interrupt property: - -mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0xd0072004 0x84>; - interrupts = <30>; -}; - -And at the board level: - -mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -} diff --git a/dts/Bindings/net/mediatek,net.yaml b/dts/Bindings/net/mediatek,net.yaml new file mode 100644 index 0000000000..f5564ecddb --- /dev/null +++ b/dts/Bindings/net/mediatek,net.yaml @@ -0,0 +1,437 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mediatek,net.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Frame Engine Ethernet controller + +maintainers: + - Lorenzo Bianconi + - Felix Fietkau + +description: + The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs + have dual GMAC ports. + +properties: + compatible: + enum: + - mediatek,mt2701-eth + - mediatek,mt7623-eth + - mediatek,mt7622-eth + - mediatek,mt7629-eth + - mediatek,mt7986-eth + - ralink,rt5350-eth + + reg: + maxItems: 1 + + clocks: true + clock-names: true + + interrupts: + minItems: 3 + maxItems: 4 + + power-domains: + maxItems: 1 + + resets: + maxItems: 3 + + reset-names: + items: + - const: fe + - const: gmac + - const: ppe + + mediatek,ethsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the port setup. + + cci-control-port: true + + mediatek,hifsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek hifsys controller used to provide various clocks + and reset to the system. + + mediatek,sgmiisys: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 + items: + maxItems: 1 + description: + A list of phandle to the syscon node that handles the SGMII setup which is required for + those SoCs equipped with SGMII. + + dma-coherent: true + + mdio-bus: + $ref: mdio.yaml# + unevaluatedProperties: false + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +allOf: + - $ref: "ethernet-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt2701-eth + - mediatek,mt7623-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: ethif + - const: esw + - const: gp1 + - const: gp2 + + mediatek,pctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the ports slew rate and + driver current. + + - if: + properties: + compatible: + contains: + const: mediatek,mt7622-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 11 + maxItems: 11 + + clock-names: + items: + - const: ethif + - const: esw + - const: gp0 + - const: gp1 + - const: gp2 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii_ck + - const: eth2pll + + mediatek,sgmiisys: + minItems: 1 + maxItems: 1 + + mediatek,wed: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 2 + maxItems: 2 + items: + maxItems: 1 + description: + List of phandles to wireless ethernet dispatch nodes. + + mediatek,pcie-mirror: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek pcie-mirror controller. + + - if: + properties: + compatible: + contains: + const: mediatek,mt7629-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 17 + maxItems: 17 + + clock-names: + items: + - const: ethif + - const: sgmiitop + - const: esw + - const: gp0 + - const: gp1 + - const: gp2 + - const: fe + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: sgmii2_cdr_ref + - const: sgmii2_cdr_fb + - const: sgmii_ck + - const: eth2pll + + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the path from GMAC to + PHY variants. + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: mediatek,mt7986-eth + then: + properties: + interrupts: + minItems: 4 + + clocks: + minItems: 15 + maxItems: 15 + + clock-names: + items: + - const: fe + - const: gp2 + - const: gp1 + - const: wocpu1 + - const: wocpu0 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: sgmii2_cdr_ref + - const: sgmii2_cdr_fb + - const: netsys0 + - const: netsys1 + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + +patternProperties: + "^mac@[0-1]$": + type: object + additionalProperties: false + allOf: + - $ref: ethernet-controller.yaml# + description: + Ethernet MAC node + properties: + compatible: + const: mediatek,eth-mac + + reg: + maxItems: 1 + + phy-handle: true + + phy-mode: true + + required: + - reg + - compatible + - phy-handle + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - mediatek,ethsys + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ethernet: ethernet@1b100000 { + compatible = "mediatek,mt7622-eth"; + reg = <0 0x1b100000 0 0x20000>; + interrupts = , + , + ; + clocks = <&topckgen CLK_TOP_ETH_SEL>, + <ðsys CLK_ETH_ESW_EN>, + <ðsys CLK_ETH_GP0_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_GP2_EN>, + <&sgmiisys CLK_SGMII_TX250M_EN>, + <&sgmiisys CLK_SGMII_RX250M_EN>, + <&sgmiisys CLK_SGMII_CDR_REF>, + <&sgmiisys CLK_SGMII_CDR_FB>, + <&topckgen CLK_TOP_SGMIIPLL>, + <&apmixedsys CLK_APMIXED_ETH2PLL>; + clock-names = "ethif", "esw", "gp0", "gp1", "gp2", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", + "eth2pll"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys>; + cci-control-port = <&cci_control2>; + mediatek,pcie-mirror = <&pcie_mirror>; + mediatek,hifsys = <&hifsys>; + dma-coherent; + + #address-cells = <1>; + #size-cells = <0>; + + mdio0: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + reg = <0>; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + reg = <1>; + }; + }; + }; + + - | + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + eth: ethernet@15100000 { + #define CLK_ETH_FE_EN 0 + #define CLK_ETH_WOCPU1_EN 3 + #define CLK_ETH_WOCPU0_EN 4 + #define CLK_TOP_NETSYS_SEL 43 + #define CLK_TOP_NETSYS_500M_SEL 44 + #define CLK_TOP_NETSYS_2X_SEL 46 + #define CLK_TOP_SGM_325M_SEL 47 + #define CLK_APMIXED_NET2PLL 1 + #define CLK_APMIXED_SGMPLL 3 + + compatible = "mediatek,mt7986-eth"; + reg = <0 0x15100000 0 0x80000>; + interrupts = , + , + , + ; + clocks = <ðsys CLK_ETH_FE_EN>, + <ðsys CLK_ETH_GP2_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_WOCPU1_EN>, + <ðsys CLK_ETH_WOCPU0_EN>, + <&sgmiisys0 CLK_SGMII_TX250M_EN>, + <&sgmiisys0 CLK_SGMII_RX250M_EN>, + <&sgmiisys0 CLK_SGMII_CDR_REF>, + <&sgmiisys0 CLK_SGMII_CDR_FB>, + <&sgmiisys1 CLK_SGMII_TX250M_EN>, + <&sgmiisys1 CLK_SGMII_RX250M_EN>, + <&sgmiisys1 CLK_SGMII_CDR_REF>, + <&sgmiisys1 CLK_SGMII_CDR_FB>, + <&topckgen CLK_TOP_NETSYS_SEL>, + <&topckgen CLK_TOP_NETSYS_SEL>; + clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", + "sgmii2_tx250m", "sgmii2_rx250m", + "sgmii2_cdr_ref", "sgmii2_cdr_fb", + "netsys0", "netsys1"; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>; + assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>, + <&topckgen CLK_TOP_SGM_325M_SEL>; + assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>, + <&apmixedsys CLK_APMIXED_SGMPLL>; + + #address-cells = <1>; + #size-cells = <0>; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@0 { + compatible = "ethernet-phy-id67c9.de0a"; + phy-mode = "2500base-x"; + reset-gpios = <&pio 6 1>; + reset-deassert-us = <20000>; + reg = <5>; + }; + + phy6: ethernet-phy@1 { + compatible = "ethernet-phy-id67c9.de0a"; + phy-mode = "2500base-x"; + reg = <6>; + }; + }; + + mac0: mac@0 { + compatible = "mediatek,eth-mac"; + phy-mode = "2500base-x"; + phy-handle = <&phy5>; + reg = <0>; + }; + + mac1: mac@1 { + compatible = "mediatek,eth-mac"; + phy-mode = "2500base-x"; + phy-handle = <&phy6>; + reg = <1>; + }; + }; + }; diff --git a/dts/Bindings/net/mediatek-dwmac.yaml b/dts/Bindings/net/mediatek-dwmac.yaml index 9019446833..61b2fb9e14 100644 --- a/dts/Bindings/net/mediatek-dwmac.yaml +++ b/dts/Bindings/net/mediatek-dwmac.yaml @@ -58,6 +58,9 @@ properties: - const: rmii_internal - const: mac_cg + power-domains: + maxItems: 1 + mediatek,pericfg: $ref: /schemas/types.yaml#/definitions/phandle description: diff --git a/dts/Bindings/net/mediatek-net.txt b/dts/Bindings/net/mediatek-net.txt deleted file mode 100644 index 72d03e07cf..0000000000 --- a/dts/Bindings/net/mediatek-net.txt +++ /dev/null @@ -1,98 +0,0 @@ -MediaTek Frame Engine Ethernet controller -========================================= - -The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs -have dual GMAC each represented by a child node.. - -* Ethernet controller node - -Required properties: -- compatible: Should be - "mediatek,mt2701-eth": for MT2701 SoC - "mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC - "mediatek,mt7622-eth": for MT7622 SoC - "mediatek,mt7629-eth": for MT7629 SoC - "ralink,rt5350-eth": for Ralink Rt5350F and MT7628/88 SoC -- reg: Address and length of the register set for the device -- interrupts: Should contain the three frame engines interrupts in numeric - order. These are fe_int0, fe_int1 and fe_int2. -- clocks: the clock used by the core -- clock-names: the names of the clock listed in the clocks property. These are - "ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC - "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m", - "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC - "ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "sgmii_tx250m", - "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii2_tx250m", - "sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb", "sgmii_ck", - "eth2pll" : For MT7629 SoC. -- power-domains: phandle to the power domain that the ethernet is part of -- resets: Should contain phandles to the ethsys reset signals -- reset-names: Should contain the names of reset signal listed in the resets - property - These are "fe", "gmac" and "ppe" -- mediatek,ethsys: phandle to the syscon node that handles the port setup -- mediatek,infracfg: phandle to the syscon node that handles the path from - GMAC to PHY variants, which is required for MT7629 SoC. -- mediatek,sgmiisys: a list of phandles to the syscon node that handles the - SGMII setup which is required for those SoCs equipped with SGMII such - as MT7622 and MT7629 SoC. And MT7622 have only one set of SGMII shared - by GMAC1 and GMAC2; MT7629 have two independent sets of SGMII directed - to GMAC1 and GMAC2, respectively. -- mediatek,pctl: phandle to the syscon node that handles the ports slew rate - and driver current: only for MT2701 and MT7623 SoC - -* Ethernet MAC node - -Required properties: -- compatible: Should be "mediatek,eth-mac" -- reg: The number of the MAC -- phy-handle: see ethernet.txt file in the same directory and - the phy-mode "trgmii" required being provided when reg - is equal to 0 and the MAC uses fixed-link to connect - with internal switch such as MT7530. - -Example: - -eth: ethernet@1b100000 { - compatible = "mediatek,mt7623-eth"; - reg = <0 0x1b100000 0 0x20000>; - clocks = <&topckgen CLK_TOP_ETHIF_SEL>, - <ðsys CLK_ETHSYS_ESW>, - <ðsys CLK_ETHSYS_GP2>, - <ðsys CLK_ETHSYS_GP1>; - clock-names = "ethif", "esw", "gp2", "gp1"; - interrupts = ; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; - resets = <ðsys MT2701_ETHSYS_ETH_RST>; - reset-names = "eth"; - mediatek,ethsys = <ðsys>; - mediatek,pctl = <&syscfg_pctl_a>; - #address-cells = <1>; - #size-cells = <0>; - - gmac1: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-handle = <&phy0>; - }; - - gmac2: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-handle = <&phy1>; - }; - - mdio-bus { - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - phy-mode = "rgmii"; - }; - }; -}; diff --git a/dts/Bindings/net/micrel.txt b/dts/Bindings/net/micrel.txt index 8d157f0295..a9ed691ffb 100644 --- a/dts/Bindings/net/micrel.txt +++ b/dts/Bindings/net/micrel.txt @@ -45,3 +45,12 @@ Optional properties: In fiber mode, auto-negotiation is disabled and the PHY can only work in 100base-fx (full and half duplex) modes. + + - coma-mode-gpios: If present the given gpio will be deasserted when the + PHY is probed. + + Some PHYs have a COMA mode input pin which puts the PHY into + isolate and power-down mode. On some boards this input is connected + to a GPIO of the SoC. + + Supported on the LAN8814. diff --git a/dts/Bindings/net/microchip,lan95xx.yaml b/dts/Bindings/net/microchip,lan95xx.yaml new file mode 100644 index 0000000000..cf91fecd89 --- /dev/null +++ b/dts/Bindings/net/microchip,lan95xx.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/microchip,lan95xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The device tree bindings for the USB Ethernet controllers + +maintainers: + - Oleksij Rempel + +description: | + Device tree properties for hard wired SMSC95xx compatible USB Ethernet + controller. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + items: + - enum: + - usb424,9500 # SMSC9500 USB Ethernet Device + - usb424,9505 # SMSC9505 USB Ethernet Device + - usb424,9530 # SMSC LAN9530 USB Ethernet Device + - usb424,9730 # SMSC LAN9730 USB Ethernet Device + - usb424,9900 # SMSC9500 USB Ethernet Device (SAL10) + - usb424,9901 # SMSC9505 USB Ethernet Device (SAL10) + - usb424,9902 # SMSC9500A USB Ethernet Device (SAL10) + - usb424,9903 # SMSC9505A USB Ethernet Device (SAL10) + - usb424,9904 # SMSC9512/9514 USB Hub & Ethernet Device (SAL10) + - usb424,9905 # SMSC9500A USB Ethernet Device (HAL) + - usb424,9906 # SMSC9505A USB Ethernet Device (HAL) + - usb424,9907 # SMSC9500 USB Ethernet Device (Alternate ID) + - usb424,9908 # SMSC9500A USB Ethernet Device (Alternate ID) + - usb424,9909 # SMSC9512/9514 USB Hub & Ethernet Devic. ID) + - usb424,9e00 # SMSC9500A USB Ethernet Device + - usb424,9e01 # SMSC9505A USB Ethernet Device + - usb424,9e08 # SMSC LAN89530 USB Ethernet Device + - usb424,ec00 # SMSC9512/9514 USB Hub & Ethernet Device + + reg: true + local-mac-address: true + mac-address: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + usb { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usb424,9e00"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; + }; diff --git a/dts/Bindings/net/microchip,lan966x-switch.yaml b/dts/Bindings/net/microchip,lan966x-switch.yaml index 13812768b9..dc116f1475 100644 --- a/dts/Bindings/net/microchip,lan966x-switch.yaml +++ b/dts/Bindings/net/microchip,lan966x-switch.yaml @@ -39,6 +39,7 @@ properties: - description: frame dma based extraction - description: analyzer interrupt - description: ptp interrupt + - description: ptp external interrupt interrupt-names: minItems: 1 @@ -47,16 +48,15 @@ properties: - const: fdma - const: ana - const: ptp + - const: ptp-ext resets: items: - description: Reset controller used for switch core reset (soft reset) - - description: Reset controller used for releasing the phy from reset reset-names: items: - const: switch - - const: phy ethernet-ports: type: object @@ -145,8 +145,8 @@ examples: reg-names = "cpu", "gcb"; interrupts = ; interrupt-names = "xtr"; - resets = <&switch_reset 0>, <&phy_reset 0>; - reset-names = "switch", "phy"; + resets = <&switch_reset 0>; + reset-names = "switch"; ethernet-ports { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/net/mscc,miim.yaml b/dts/Bindings/net/mscc,miim.yaml new file mode 100644 index 0000000000..2c451cfa4e --- /dev/null +++ b/dts/Bindings/net/mscc,miim.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mscc,miim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi MII Management Controller (MIIM) + +maintainers: + - Alexandre Belloni + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + enum: + - mscc,ocelot-miim + - microchip,lan966x-miim + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + items: + - description: base address + - description: associated reset register for internal PHYs + minItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: true + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + mdio@107009c { + compatible = "mscc,ocelot-miim"; + reg = <0x107009c 0x36>, <0x10700f0 0x8>; + interrupts = <14>; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; diff --git a/dts/Bindings/net/mscc-miim.txt b/dts/Bindings/net/mscc-miim.txt deleted file mode 100644 index 70e0cb1ee4..0000000000 --- a/dts/Bindings/net/mscc-miim.txt +++ /dev/null @@ -1,26 +0,0 @@ -Microsemi MII Management Controller (MIIM) / MDIO -================================================= - -Properties: -- compatible: must be "mscc,ocelot-miim" or "microchip,lan966x-miim" -- reg: The base address of the MDIO bus controller register bank. Optionally, a - second register bank can be defined if there is an associated reset register - for internal PHYs -- #address-cells: Must be <1>. -- #size-cells: Must be <0>. MDIO addresses have no size component. -- interrupts: interrupt specifier (refer to the interrupt binding) - -Typically an MDIO bus might have several children. - -Example: - mdio@107009c { - #address-cells = <1>; - #size-cells = <0>; - compatible = "mscc,ocelot-miim"; - reg = <0x107009c 0x36>, <0x10700f0 0x8>; - interrupts = <14>; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; diff --git a/dts/Bindings/net/qcom,ipa.yaml b/dts/Bindings/net/qcom,ipa.yaml index 58ecc62adf..dd4bb2e748 100644 --- a/dts/Bindings/net/qcom,ipa.yaml +++ b/dts/Bindings/net/qcom,ipa.yaml @@ -182,6 +182,12 @@ examples: smp2p-mpss { compatible = "qcom,smp2p"; + interrupts = ; + mboxes = <&apss_shared 6>; + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + ipa_smp2p_out: ipa-ap-to-modem { qcom,entry-name = "ipa"; #qcom,smem-state-cells = <1>; @@ -193,6 +199,7 @@ examples: #interrupt-cells = <2>; }; }; + ipa@1e40000 { compatible = "qcom,sdm845-ipa"; diff --git a/dts/Bindings/net/renesas,etheravb.yaml b/dts/Bindings/net/renesas,etheravb.yaml index ee2ccacc39..acf347f3cd 100644 --- a/dts/Bindings/net/renesas,etheravb.yaml +++ b/dts/Bindings/net/renesas,etheravb.yaml @@ -43,6 +43,11 @@ properties: - renesas,etheravb-r8a779a0 # R-Car V3U - const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2 + - items: + - enum: + - renesas,etheravb-r9a09g011 # RZ/V2M + - const: renesas,etheravb-rzv2m # RZ/V2M compatible + - items: - enum: - renesas,r9a07g043-gbeth # RZ/G2UL @@ -160,16 +165,33 @@ allOf: - const: arp_ns rx-internal-delay-ps: false else: - properties: - interrupts: - minItems: 25 - maxItems: 25 - interrupt-names: - items: - pattern: '^ch[0-9]+$' - required: - - interrupt-names - - rx-internal-delay-ps + if: + properties: + compatible: + contains: + const: renesas,etheravb-rzv2m + then: + properties: + interrupts: + minItems: 29 + maxItems: 29 + interrupt-names: + items: + pattern: '^(ch(1?)[0-9])|ch20|ch21|dia|dib|err_a|err_b|mgmt_a|mgmt_b|line3$' + rx-internal-delay-ps: false + required: + - interrupt-names + else: + properties: + interrupts: + minItems: 25 + maxItems: 25 + interrupt-names: + items: + pattern: '^ch[0-9]+$' + required: + - interrupt-names + - rx-internal-delay-ps - if: properties: @@ -231,17 +253,35 @@ allOf: - const: chi - const: refclk else: - properties: - clocks: - minItems: 1 - items: - - description: AVB functional clock - - description: Optional TXC reference clock - clock-names: - minItems: 1 - items: - - const: fck - - const: refclk + if: + properties: + compatible: + contains: + const: renesas,etheravb-rzv2m + then: + properties: + clocks: + items: + - description: Main clock + - description: Coherent Hub Interface clock + - description: gPTP reference clock + clock-names: + items: + - const: axi + - const: chi + - const: gptp + else: + properties: + clocks: + minItems: 1 + items: + - description: AVB functional clock + - description: Optional TXC reference clock + clock-names: + minItems: 1 + items: + - const: fck + - const: refclk additionalProperties: false diff --git a/dts/Bindings/net/smsc,lan91c111.yaml b/dts/Bindings/net/smsc,lan91c111.yaml new file mode 100644 index 0000000000..6df5331626 --- /dev/null +++ b/dts/Bindings/net/smsc,lan91c111.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/smsc,lan91c111.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Smart Mixed-Signal Connectivity (SMSC) LAN91C9x/91C1xx Controller + +maintainers: + - Nicolas Pitre + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: smsc,lan91c111 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reg-shift: true + + reg-io-width: + enum: [ 1, 2, 4 ] + default: 4 + + reset-gpios: + description: GPIO connected to control RESET pin + maxItems: 1 + + power-gpios: + description: GPIO connect to control PWRDWN pin + maxItems: 1 + + pxa-u16-align4: + description: put in place the workaround the force all u16 writes to be + 32 bits aligned + type: boolean + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + + ethernet@4010000 { + compatible = "smsc,lan91c111"; + reg = <0x40100000 0x10000>; + phy-mode = "mii"; + interrupts = ; + reg-io-width = <2>; + }; diff --git a/dts/Bindings/net/smsc-lan91c111.txt b/dts/Bindings/net/smsc-lan91c111.txt deleted file mode 100644 index 309e37eb7c..0000000000 --- a/dts/Bindings/net/smsc-lan91c111.txt +++ /dev/null @@ -1,17 +0,0 @@ -SMSC LAN91c111 Ethernet mac - -Required properties: -- compatible = "smsc,lan91c111"; -- reg : physical address and size of registers -- interrupts : interrupt connection - -Optional properties: -- phy-device : see ethernet.txt file in the same directory -- reg-io-width : Mask of sizes (in bytes) of the IO accesses that - are supported on the device. Valid value for SMSC LAN91c111 are - 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning - 16-bit access only. -- power-gpios: GPIO to control the PWRDWN pin -- reset-gpios: GPIO to control the RESET pin -- pxa-u16-align4 : Boolean, put in place the workaround the force all - u16 writes to be 32 bits aligned diff --git a/dts/Bindings/net/sunplus,sp7021-emac.yaml b/dts/Bindings/net/sunplus,sp7021-emac.yaml new file mode 100644 index 0000000000..62dffee27c --- /dev/null +++ b/dts/Bindings/net/sunplus,sp7021-emac.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/sunplus,sp7021-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SP7021 Dual Ethernet MAC Device Tree Bindings + +maintainers: + - Wells Lu + +description: | + Sunplus SP7021 dual 10M/100M Ethernet MAC controller. + Device node of the controller has following properties. + +properties: + compatible: + const: sunplus,sp7021-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + ethernet-ports: + type: object + description: Ethernet ports to PHY + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^port@[0-1]$": + type: object + description: Port to PHY + + properties: + reg: + minimum: 0 + maximum: 1 + + phy-handle: + maxItems: 1 + + phy-mode: + maxItems: 1 + + nvmem-cells: + items: + - description: nvmem cell address of MAC address + + nvmem-cell-names: + description: names corresponding to the nvmem cells + items: + - const: mac-address + + required: + - reg + - phy-handle + - phy-mode + - nvmem-cells + - nvmem-cell-names + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - pinctrl-0 + - pinctrl-names + - ethernet-ports + - mdio + +examples: + - | + #include + + ethernet@9c108000 { + compatible = "sunplus,sp7021-emac"; + reg = <0x9c108000 0x400>; + interrupt-parent = <&intc>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc 0xa7>; + resets = <&rstc 0x97>; + pinctrl-0 = <&emac_demo_board_v3_pins>; + pinctrl-names = "default"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + nvmem-cells = <&mac_addr0>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { + reg = <1>; + phy-handle = <ð_phy1>; + phy-mode = "rmii"; + nvmem-cells = <&mac_addr1>; + nvmem-cell-names = "mac-address"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + reg = <0>; + }; + + eth_phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; +... diff --git a/dts/Bindings/net/ti,davinci-mdio.yaml b/dts/Bindings/net/ti,davinci-mdio.yaml index 6f44f9516c..a339202c5e 100644 --- a/dts/Bindings/net/ti,davinci-mdio.yaml +++ b/dts/Bindings/net/ti,davinci-mdio.yaml @@ -34,6 +34,7 @@ properties: maxItems: 1 bus_freq: + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 2500000 description: MDIO Bus frequency diff --git a/dts/Bindings/net/ti,k3-am654-cpts.yaml b/dts/Bindings/net/ti,k3-am654-cpts.yaml index a30419ef55..b783ad0d1f 100644 --- a/dts/Bindings/net/ti,k3-am654-cpts.yaml +++ b/dts/Bindings/net/ti,k3-am654-cpts.yaml @@ -142,4 +142,3 @@ examples: assigned-clock-parents = <&k3_clks 118 11>; }; }; - diff --git a/dts/Bindings/net/toshiba,visconti-dwmac.yaml b/dts/Bindings/net/toshiba,visconti-dwmac.yaml index b12bfe61c6..0988ed8d1c 100644 --- a/dts/Bindings/net/toshiba,visconti-dwmac.yaml +++ b/dts/Bindings/net/toshiba,visconti-dwmac.yaml @@ -52,6 +52,7 @@ unevaluatedProperties: false examples: - | + #include #include soc { @@ -63,7 +64,7 @@ examples: reg = <0 0x28000000 0 0x10000>; interrupts = ; interrupt-names = "macirq"; - clocks = <&clk300mhz>, <&clk125mhz>; + clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>; clock-names = "stmmaceth", "phy_ref_clk"; snps,txpbl = <4>; snps,rxpbl = <4>; diff --git a/dts/Bindings/net/wireless/mediatek,mt76.yaml b/dts/Bindings/net/wireless/mediatek,mt76.yaml index 249967d8d7..5a12dc3228 100644 --- a/dts/Bindings/net/wireless/mediatek,mt76.yaml +++ b/dts/Bindings/net/wireless/mediatek,mt76.yaml @@ -51,7 +51,7 @@ properties: description: Specify the consys reset for mt7986. - reset-name: + reset-names: const: consys mediatek,infracfg: diff --git a/dts/Bindings/net/wireless/qcom,ath11k.yaml b/dts/Bindings/net/wireless/qcom,ath11k.yaml index cdf7b873b4..8c01fdba13 100644 --- a/dts/Bindings/net/wireless/qcom,ath11k.yaml +++ b/dts/Bindings/net/wireless/qcom,ath11k.yaml @@ -20,120 +20,17 @@ properties: enum: - qcom,ipq8074-wifi - qcom,ipq6018-wifi + - qcom,wcn6750-wifi reg: maxItems: 1 interrupts: - items: - - description: misc-pulse1 interrupt events - - description: misc-latch interrupt events - - description: sw exception interrupt events - - description: watchdog interrupt events - - description: interrupt event for ring CE0 - - description: interrupt event for ring CE1 - - description: interrupt event for ring CE2 - - description: interrupt event for ring CE3 - - description: interrupt event for ring CE4 - - description: interrupt event for ring CE5 - - description: interrupt event for ring CE6 - - description: interrupt event for ring CE7 - - description: interrupt event for ring CE8 - - description: interrupt event for ring CE9 - - description: interrupt event for ring CE10 - - description: interrupt event for ring CE11 - - description: interrupt event for ring host2wbm-desc-feed - - description: interrupt event for ring host2reo-re-injection - - description: interrupt event for ring host2reo-command - - description: interrupt event for ring host2rxdma-monitor-ring3 - - description: interrupt event for ring host2rxdma-monitor-ring2 - - description: interrupt event for ring host2rxdma-monitor-ring1 - - description: interrupt event for ring reo2ost-exception - - description: interrupt event for ring wbm2host-rx-release - - description: interrupt event for ring reo2host-status - - description: interrupt event for ring reo2host-destination-ring4 - - description: interrupt event for ring reo2host-destination-ring3 - - description: interrupt event for ring reo2host-destination-ring2 - - description: interrupt event for ring reo2host-destination-ring1 - - description: interrupt event for ring rxdma2host-monitor-destination-mac3 - - description: interrupt event for ring rxdma2host-monitor-destination-mac2 - - description: interrupt event for ring rxdma2host-monitor-destination-mac1 - - description: interrupt event for ring ppdu-end-interrupts-mac3 - - description: interrupt event for ring ppdu-end-interrupts-mac2 - - description: interrupt event for ring ppdu-end-interrupts-mac1 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 - - description: interrupt event for ring rxdma2host-destination-ring-mac3 - - description: interrupt event for ring rxdma2host-destination-ring-mac2 - - description: interrupt event for ring rxdma2host-destination-ring-mac1 - - description: interrupt event for ring host2tcl-input-ring4 - - description: interrupt event for ring host2tcl-input-ring3 - - description: interrupt event for ring host2tcl-input-ring2 - - description: interrupt event for ring host2tcl-input-ring1 - - description: interrupt event for ring wbm2host-tx-completions-ring3 - - description: interrupt event for ring wbm2host-tx-completions-ring2 - - description: interrupt event for ring wbm2host-tx-completions-ring1 - - description: interrupt event for ring tcl2host-status-ring - + minItems: 32 + maxItems: 52 interrupt-names: - items: - - const: misc-pulse1 - - const: misc-latch - - const: sw-exception - - const: watchdog - - const: ce0 - - const: ce1 - - const: ce2 - - const: ce3 - - const: ce4 - - const: ce5 - - const: ce6 - - const: ce7 - - const: ce8 - - const: ce9 - - const: ce10 - - const: ce11 - - const: host2wbm-desc-feed - - const: host2reo-re-injection - - const: host2reo-command - - const: host2rxdma-monitor-ring3 - - const: host2rxdma-monitor-ring2 - - const: host2rxdma-monitor-ring1 - - const: reo2ost-exception - - const: wbm2host-rx-release - - const: reo2host-status - - const: reo2host-destination-ring4 - - const: reo2host-destination-ring3 - - const: reo2host-destination-ring2 - - const: reo2host-destination-ring1 - - const: rxdma2host-monitor-destination-mac3 - - const: rxdma2host-monitor-destination-mac2 - - const: rxdma2host-monitor-destination-mac1 - - const: ppdu-end-interrupts-mac3 - - const: ppdu-end-interrupts-mac2 - - const: ppdu-end-interrupts-mac1 - - const: rxdma2host-monitor-status-ring-mac3 - - const: rxdma2host-monitor-status-ring-mac2 - - const: rxdma2host-monitor-status-ring-mac1 - - const: host2rxdma-host-buf-ring-mac3 - - const: host2rxdma-host-buf-ring-mac2 - - const: host2rxdma-host-buf-ring-mac1 - - const: rxdma2host-destination-ring-mac3 - - const: rxdma2host-destination-ring-mac2 - - const: rxdma2host-destination-ring-mac1 - - const: host2tcl-input-ring4 - - const: host2tcl-input-ring3 - - const: host2tcl-input-ring2 - - const: host2tcl-input-ring1 - - const: wbm2host-tx-completions-ring3 - - const: wbm2host-tx-completions-ring2 - - const: wbm2host-tx-completions-ring1 - - const: tcl2host-status-ring + maxItems: 52 qcom,rproc: $ref: /schemas/types.yaml#/definitions/phandle @@ -151,20 +48,205 @@ properties: board-2.bin for designs with colliding bus and device specific ids memory-region: - maxItems: 1 + minItems: 1 + maxItems: 2 description: phandle to a node describing reserved memory (System RAM memory) used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt) + iommus: + minItems: 1 + maxItems: 2 + + wifi-firmware: + type: object + description: | + WCN6750 wifi node can contain one optional firmware subnode. + Firmware subnode is needed when the platform does not have Trustzone. + required: + - iommus + required: - compatible - reg - interrupts - - interrupt-names - qcom,rproc additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi + then: + properties: + interrupts: + items: + - description: misc-pulse1 interrupt events + - description: misc-latch interrupt events + - description: sw exception interrupt events + - description: watchdog interrupt events + - description: interrupt event for ring CE0 + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring CE11 + - description: interrupt event for ring host2wbm-desc-feed + - description: interrupt event for ring host2reo-re-injection + - description: interrupt event for ring host2reo-command + - description: interrupt event for ring host2rxdma-monitor-ring3 + - description: interrupt event for ring host2rxdma-monitor-ring2 + - description: interrupt event for ring host2rxdma-monitor-ring1 + - description: interrupt event for ring reo2ost-exception + - description: interrupt event for ring wbm2host-rx-release + - description: interrupt event for ring reo2host-status + - description: interrupt event for ring reo2host-destination-ring4 + - description: interrupt event for ring reo2host-destination-ring3 + - description: interrupt event for ring reo2host-destination-ring2 + - description: interrupt event for ring reo2host-destination-ring1 + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 + - description: interrupt event for ring ppdu-end-interrupts-mac3 + - description: interrupt event for ring ppdu-end-interrupts-mac2 + - description: interrupt event for ring ppdu-end-interrupts-mac1 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 + - description: interrupt event for ring rxdma2host-destination-ring-mac3 + - description: interrupt event for ring rxdma2host-destination-ring-mac2 + - description: interrupt event for ring rxdma2host-destination-ring-mac1 + - description: interrupt event for ring host2tcl-input-ring4 + - description: interrupt event for ring host2tcl-input-ring3 + - description: interrupt event for ring host2tcl-input-ring2 + - description: interrupt event for ring host2tcl-input-ring1 + - description: interrupt event for ring wbm2host-tx-completions-ring3 + - description: interrupt event for ring wbm2host-tx-completions-ring2 + - description: interrupt event for ring wbm2host-tx-completions-ring1 + - description: interrupt event for ring tcl2host-status-ring + interrupt-names: + items: + - const: misc-pulse1 + - const: misc-latch + - const: sw-exception + - const: watchdog + - const: ce0 + - const: ce1 + - const: ce2 + - const: ce3 + - const: ce4 + - const: ce5 + - const: ce6 + - const: ce7 + - const: ce8 + - const: ce9 + - const: ce10 + - const: ce11 + - const: host2wbm-desc-feed + - const: host2reo-re-injection + - const: host2reo-command + - const: host2rxdma-monitor-ring3 + - const: host2rxdma-monitor-ring2 + - const: host2rxdma-monitor-ring1 + - const: reo2ost-exception + - const: wbm2host-rx-release + - const: reo2host-status + - const: reo2host-destination-ring4 + - const: reo2host-destination-ring3 + - const: reo2host-destination-ring2 + - const: reo2host-destination-ring1 + - const: rxdma2host-monitor-destination-mac3 + - const: rxdma2host-monitor-destination-mac2 + - const: rxdma2host-monitor-destination-mac1 + - const: ppdu-end-interrupts-mac3 + - const: ppdu-end-interrupts-mac2 + - const: ppdu-end-interrupts-mac1 + - const: rxdma2host-monitor-status-ring-mac3 + - const: rxdma2host-monitor-status-ring-mac2 + - const: rxdma2host-monitor-status-ring-mac1 + - const: host2rxdma-host-buf-ring-mac3 + - const: host2rxdma-host-buf-ring-mac2 + - const: host2rxdma-host-buf-ring-mac1 + - const: rxdma2host-destination-ring-mac3 + - const: rxdma2host-destination-ring-mac2 + - const: rxdma2host-destination-ring-mac1 + - const: host2tcl-input-ring4 + - const: host2tcl-input-ring3 + - const: host2tcl-input-ring2 + - const: host2tcl-input-ring1 + - const: wbm2host-tx-completions-ring3 + - const: wbm2host-tx-completions-ring2 + - const: wbm2host-tx-completions-ring1 + - const: tcl2host-status-ring + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi + then: + required: + - interrupt-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn6750-wifi + then: + properties: + interrupts: + items: + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring DP1 + - description: interrupt event for ring DP2 + - description: interrupt event for ring DP3 + - description: interrupt event for ring DP4 + - description: interrupt event for ring DP5 + - description: interrupt event for ring DP6 + - description: interrupt event for ring DP7 + - description: interrupt event for ring DP8 + - description: interrupt event for ring DP9 + - description: interrupt event for ring DP10 + - description: interrupt event for ring DP11 + - description: interrupt event for ring DP12 + - description: interrupt event for ring DP13 + - description: interrupt event for ring DP14 + - description: interrupt event for ring DP15 + - description: interrupt event for ring DP16 + - description: interrupt event for ring DP17 + - description: interrupt event for ring DP18 + - description: interrupt event for ring DP19 + - description: interrupt event for ring DP20 + - description: interrupt event for ring DP21 + - description: interrupt event for ring DP22 + examples: - | @@ -302,10 +384,71 @@ examples: pcie0 { #size-cells = <2>; #address-cells = <3>; - + wifi_0: wifi@0 { reg = <0 0 0 0 0>; memory-region = <&qcn9074_0>; }; }; }; + + - | + #include + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + wlan_ce_mem: memory@4cd000 { + no-map; + reg = <0x0 0x004cd000 0x0 0x1000>; + }; + + wlan_fw_mem: memory@80c00000 { + no-map; + reg = <0x0 0x80c00000 0x0 0xc00000>; + }; + }; + + wifi: wifi@17a10040 { + compatible = "qcom,wcn6750-wifi"; + reg = <0x17a10040 0x0>; + iommus = <&apps_smmu 0x1c00 0x1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + qcom,rproc = <&remoteproc_wpss>; + memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; + }; diff --git a/dts/Bindings/net/wireless/silabs,wfx.yaml b/dts/Bindings/net/wireless/silabs,wfx.yaml new file mode 100644 index 0000000000..76199a67d6 --- /dev/null +++ b/dts/Bindings/net/wireless/silabs,wfx.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020, Silicon Laboratories, Inc. +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Labs WFxxx devicetree bindings + +maintainers: + - Jérôme Pouiller + +description: > + Support for the Wifi chip WFxxx from Silicon Labs. Currently, the only device + from the WFxxx series is the WF200 described here: + https://www.silabs.com/documents/public/data-sheets/wf200-datasheet.pdf + + The WF200 can be connected via SPI or via SDIO. + + For SDIO: + + Declaring the WFxxx chip in device tree is mandatory (usually, the VID/PID is + sufficient for the SDIO devices). + + It is recommended to declare a mmc-pwrseq on SDIO host above WFx. Without + it, you may encounter issues during reboot. The mmc-pwrseq should be + compatible with mmc-pwrseq-simple. Please consult + Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more + information. + + For SPI: + + In add of the properties below, please consult + Documentation/devicetree/bindings/spi/spi-controller.yaml for optional SPI + related properties. + +properties: + compatible: + items: + - enum: + - prt,prtt1c-wfm200 # Protonic PRTT1C Board + - silabs,brd4001a # WGM160P Evaluation Board + - silabs,brd8022a # WF200 Evaluation Board + - silabs,brd8023a # WFM200 Evaluation Board + - const: silabs,wf200 # Chip alone without antenna + + reg: + description: + When used on SDIO bus, must be set to 1. When used on SPI bus, it is + the chip select address of the device as defined in the SPI devices + bindings. + maxItems: 1 + + spi-max-frequency: true + + interrupts: + description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is + used, this property is required. When SDIO is used, the "in-band" + interrupt provided by the SDIO bus is used unless an interrupt is defined + in the Device Tree. + maxItems: 1 + + reset-gpios: + description: (SPI only) Phandle of gpio that will be used to reset chip + during probe. Without this property, you may encounter issues with warm + boot. + + For SDIO, the reset gpio should declared using a mmc-pwrseq. + maxItems: 1 + + wakeup-gpios: + description: Phandle of gpio that will be used to wake-up chip. Without this + property, driver will disable most of power saving features. + maxItems: 1 + + silabs,antenna-config-file: + $ref: /schemas/types.yaml#/definitions/string + description: Use an alternative file for antenna configuration (aka + "Platform Data Set" in Silabs jargon). Default depends of "compatible" + string. For "silabs,wf200", the default is 'wf200.pds'. + + local-mac-address: true + + mac-address: true + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include + #include + + spi { + #address-cells = <1>; + #size-cells = <0>; + + wifi@0 { + compatible = "silabs,brd8022a", "silabs,wf200"; + pinctrl-names = "default"; + pinctrl-0 = <&wfx_irq &wfx_gpios>; + reg = <0>; + interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>; + wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + spi-max-frequency = <42000000>; + }; + }; + + - | + #include + #include + + wfx_pwrseq: wfx_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wfx_reset>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + mmc { + mmc-pwrseq = <&wfx_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "silabs,brd8022a", "silabs,wf200"; + pinctrl-names = "default"; + pinctrl-0 = <&wfx_wakeup>; + reg = <1>; + wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + }; + }; +... diff --git a/dts/Bindings/net/wireless/ti,wlcore.yaml b/dts/Bindings/net/wireless/ti,wlcore.yaml index 8dd164d102..d68bb2ec1f 100644 --- a/dts/Bindings/net/wireless/ti,wlcore.yaml +++ b/dts/Bindings/net/wireless/ti,wlcore.yaml @@ -54,9 +54,11 @@ properties: ref-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 description: Reference clock frequency. tcxo-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 description: TCXO clock frequency. clock-xtal: diff --git a/dts/Bindings/nvme/apple,nvme-ans.yaml b/dts/Bindings/nvme/apple,nvme-ans.yaml new file mode 100644 index 0000000000..ddff9233b1 --- /dev/null +++ b/dts/Bindings/nvme/apple,nvme-ans.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvme/apple,nvme-ans.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple ANS NVM Express host controller + +maintainers: + - Sven Peter + +properties: + compatible: + items: + - enum: + - apple,t8103-nvme-ans2 + - apple,t6000-nvme-ans2 + - const: apple,nvme-ans2 + + reg: + items: + - description: NVMe and NVMMU registers + - description: ANS2 co-processor control registers + + reg-names: + items: + - const: nvme + - const: ans + + resets: + maxItems: 1 + + power-domains: + # two domains for t8103, three for t6000 + minItems: 2 + items: + - description: power domain for the NVMe controller. + - description: power domain for the first PCIe bus connecting the NVMe + controller to the storage modules. + - description: optional power domain for the second PCIe bus + connecting the NVMe controller to the storage modules. + + power-domain-names: + minItems: 2 + items: + - const: ans + - const: apcie0 + - const: apcie1 + + mboxes: + maxItems: 1 + description: Mailbox of the ANS2 co-processor + + interrupts: + maxItems: 1 + + apple,sart: + maxItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Reference to the SART address filter. + + The SART address filter is documented in iommu/apple,sart.yaml. + +if: + properties: + compatible: + contains: + const: apple,t8103-nvme-ans2 +then: + properties: + power-domains: + maxItems: 2 + power-domain-names: + maxItems: 2 +else: + properties: + power-domains: + minItems: 3 + power-domain-names: + minItems: 3 + +required: + - compatible + - reg + - reg-names + - resets + - power-domains + - power-domain-names + - mboxes + - interrupts + - apple,sart + +additionalProperties: false + +examples: + - | + #include + #include + + nvme@7bcc0000 { + compatible = "apple,t8103-nvme-ans2", "apple,nvme-ans2"; + reg = <0x7bcc0000 0x40000>, <0x77400000 0x4000>; + reg-names = "nvme", "ans"; + interrupts = ; + mboxes = <&ans>; + apple,sart = <&sart>; + power-domains = <&ps_ans2>, <&ps_apcie_st>; + power-domain-names = "ans", "apcie0"; + resets = <&ps_ans2>; + }; diff --git a/dts/Bindings/nvmem/apple,efuses.yaml b/dts/Bindings/nvmem/apple,efuses.yaml new file mode 100644 index 0000000000..5ec8f2bdb3 --- /dev/null +++ b/dts/Bindings/nvmem/apple,efuses.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/apple,efuses.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SoC eFuse-based NVMEM + +description: | + Apple SoCs such as the M1 contain factory-programmed eFuses used to e.g. store + calibration data for the PCIe and the Type-C PHY or unique chip identifiers + such as the ECID. + +maintainers: + - Sven Peter + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + items: + - enum: + - apple,t8103-efuses + - apple,t6000-efuses + - const: apple,efuses + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + efuse@3d2bc000 { + compatible = "apple,t8103-efuses", "apple,efuses"; + reg = <0x3d2bc000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ecid: efuse@500 { + reg = <0x500 0x8>; + }; + }; + +... diff --git a/dts/Bindings/nvmem/fsl,layerscape-sfp.yaml b/dts/Bindings/nvmem/fsl,layerscape-sfp.yaml index 80914b9363..3b4e6e94cb 100644 --- a/dts/Bindings/nvmem/fsl,layerscape-sfp.yaml +++ b/dts/Bindings/nvmem/fsl,layerscape-sfp.yaml @@ -10,7 +10,7 @@ maintainers: - Michael Walle description: | - SFP is the security fuse processor which among other things provide a + SFP is the security fuse processor which among other things provides a unique identifier per part. allOf: @@ -18,21 +18,45 @@ allOf: properties: compatible: - enum: - - fsl,ls1028a-sfp + oneOf: + - description: Trust architecture 2.1 SFP + items: + - const: fsl,ls1021a-sfp + - description: Trust architecture 3.0 SFP + items: + - const: fsl,ls1028a-sfp reg: maxItems: 1 + clocks: + maxItems: 1 + description: + The SFP clock. Typically, this is the platform clock divided by 4. + + clock-names: + const: sfp + + ta-prog-sfp-supply: + description: + The regulator for the TA_PROG_SFP pin. It will be enabled for programming + and disabled for reading. + required: - compatible - reg + - clock-names + - clocks unevaluatedProperties: false examples: - | + #include efuse@1e80000 { compatible = "fsl,ls1028a-sfp"; reg = <0x1e80000 0x8000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; }; diff --git a/dts/Bindings/nvmem/snvs-lpgpr.yaml b/dts/Bindings/nvmem/snvs-lpgpr.yaml index c819f0e903..e374aa7891 100644 --- a/dts/Bindings/nvmem/snvs-lpgpr.yaml +++ b/dts/Bindings/nvmem/snvs-lpgpr.yaml @@ -15,6 +15,10 @@ properties: - fsl,imx6q-snvs-lpgpr - fsl,imx6ul-snvs-lpgpr - fsl,imx7d-snvs-lpgpr + - fsl,imx8mm-snvs-lpgpr + - fsl,imx8mn-snvs-lpgpr + - fsl,imx8mp-snvs-lpgpr + - fsl,imx8mq-snvs-lpgpr required: - compatible diff --git a/dts/Bindings/opp/opp-v2-kryo-cpu.yaml b/dts/Bindings/opp/opp-v2-kryo-cpu.yaml index 8c2e9ac5f6..30f7b596d6 100644 --- a/dts/Bindings/opp/opp-v2-kryo-cpu.yaml +++ b/dts/Bindings/opp/opp-v2-kryo-cpu.yaml @@ -17,10 +17,10 @@ description: | the CPU frequencies subset and voltage value of each OPP varies based on the silicon variant in use. Qualcomm Technologies, Inc. Process Voltage Scaling Tables - defines the voltage and frequency value based on the msm-id in SMEM - and speedbin blown in the efuse combination. - The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC - to provide the OPP framework with required information (existing HW bitmap). + defines the voltage and frequency value based on the speedbin blown in + the efuse combination. + The qcom-cpufreq-nvmem driver reads the efuse value from the SoC to provide + the OPP framework with required information (existing HW bitmap). This is used to determine the voltage and frequency value for each OPP of operating-points-v2 table when it is parsed by the OPP framework. @@ -50,15 +50,11 @@ patternProperties: description: | A single 32 bit bitmap value, representing compatible HW. Bitmap: - 0: MSM8996 V3, speedbin 0 - 1: MSM8996 V3, speedbin 1 - 2: MSM8996 V3, speedbin 2 - 3: unused - 4: MSM8996 SG, speedbin 0 - 5: MSM8996 SG, speedbin 1 - 6: MSM8996 SG, speedbin 2 - 7-31: unused - maximum: 0x77 + 0: MSM8996, speedbin 0 + 1: MSM8996, speedbin 1 + 2: MSM8996, speedbin 2 + 3-31: unused + maximum: 0x7 clock-latency-ns: true @@ -184,19 +180,19 @@ examples: opp-307200000 { opp-hz = /bits/ 64 <307200000>; opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x7>; clock-latency-ns = <200000>; }; - opp-1593600000 { - opp-hz = /bits/ 64 <1593600000>; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x71>; + opp-supported-hw = <0x5>; clock-latency-ns = <200000>; }; - opp-2188800000 { - opp-hz = /bits/ 64 <2188800000>; + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x10>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; }; @@ -209,25 +205,25 @@ examples: opp-307200000 { opp-hz = /bits/ 64 <307200000>; opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x7>; clock-latency-ns = <200000>; }; - opp-1593600000 { - opp-hz = /bits/ 64 <1593600000>; + opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x70>; + opp-supported-hw = <0x6>; clock-latency-ns = <200000>; }; - opp-2150400000 { - opp-hz = /bits/ 64 <2150400000>; + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x31>; + opp-supported-hw = <0x4>; clock-latency-ns = <200000>; }; - opp-2342400000 { - opp-hz = /bits/ 64 <2342400000>; + opp-2150400000 { + opp-hz = /bits/ 64 <2150400000>; opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x10>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; }; diff --git a/dts/Bindings/pci/apple,pcie.yaml b/dts/Bindings/pci/apple,pcie.yaml index daf602ac0d..aa38680aaa 100644 --- a/dts/Bindings/pci/apple,pcie.yaml +++ b/dts/Bindings/pci/apple,pcie.yaml @@ -68,6 +68,9 @@ properties: iommu-map: true iommu-map-mask: true + power-domains: + maxItems: 1 + required: - compatible - reg @@ -134,7 +137,7 @@ examples: ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>, <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>; - power-domains = <&ps_apcie>, <&ps_apcie_gp>, <&ps_pcie_ref>; + power-domains = <&ps_apcie_gp>; pinctrl-0 = <&pcie_pins>; pinctrl-names = "default"; diff --git a/dts/Bindings/pci/layerscape-pci.txt b/dts/Bindings/pci/layerscape-pci.txt index f36efa73a4..ee8a4791a7 100644 --- a/dts/Bindings/pci/layerscape-pci.txt +++ b/dts/Bindings/pci/layerscape-pci.txt @@ -23,6 +23,7 @@ Required properties: "fsl,ls1012a-pcie" "fsl,ls1028a-pcie" EP mode: + "fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep" "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep" "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep" @@ -30,39 +31,49 @@ Required properties: - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. -- interrupt-names: Must include the following entries: - "intr": The interrupt that is asserted for controller interrupts +- interrupt-names: It could include the following entries: + "aer": Used for interrupt line which reports AER events when + non MSI/MSI-X/INTx mode is used + "pme": Used for interrupt line which reports PME events when + non MSI/MSI-X/INTx mode is used + "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a) + which has a single interrupt line for miscellaneous controller + events(could include AER and PME events). - fsl,pcie-scfg: Must include two entries. The first entry must be a link to the SCFG device node - The second entry must be '0' or '1' based on physical PCIe controller index. + The second entry is the physical PCIe controller index starting from '0'. This is used to get SCFG PEXN registers - dma-coherent: Indicates that the hardware IP block can ensure the coherency of the data transferred from/to the IP block. This can avoid the software cache flush/invalid actions, and improve the performance significantly. +Optional properties: +- big-endian: If the PEX_LUT and PF register block is in big-endian, specify + this property. + Example: - pcie@3400000 { - compatible = "fsl,ls1021a-pcie"; - reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; - interrupts = ; /* controller interrupt */ - interrupt-names = "intr"; - fsl,pcie-scfg = <&scfg 0>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - num-lanes = <4>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0 0x20000000 /* prefetchable memory */ - 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - }; + pcie@3400000 { + compatible = "fsl,ls1088a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-viewport = <256>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + }; diff --git a/dts/Bindings/pci/qcom,pcie.txt b/dts/Bindings/pci/qcom,pcie.txt deleted file mode 100644 index 0adb56d564..0000000000 --- a/dts/Bindings/pci/qcom,pcie.txt +++ /dev/null @@ -1,397 +0,0 @@ -* Qualcomm PCI express root complex - -- compatible: - Usage: required - Value type: - Definition: Value should contain - - "qcom,pcie-ipq8064" for ipq8064 - - "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065 - - "qcom,pcie-apq8064" for apq8064 - - "qcom,pcie-apq8084" for apq8084 - - "qcom,pcie-msm8996" for msm8996 or apq8096 - - "qcom,pcie-ipq4019" for ipq4019 - - "qcom,pcie-ipq8074" for ipq8074 - - "qcom,pcie-qcs404" for qcs404 - - "qcom,pcie-sc8180x" for sc8180x - - "qcom,pcie-sdm845" for sdm845 - - "qcom,pcie-sm8250" for sm8250 - - "qcom,pcie-sm8450-pcie0" for PCIe0 on sm8450 - - "qcom,pcie-sm8450-pcie1" for PCIe1 on sm8450 - - "qcom,pcie-ipq6018" for ipq6018 - -- reg: - Usage: required - Value type: - Definition: Register ranges as listed in the reg-names property - -- reg-names: - Usage: required - Value type: - Definition: Must include the following entries - - "parf" Qualcomm specific registers - - "dbi" DesignWare PCIe registers - - "elbi" External local bus interface registers - - "config" PCIe configuration space - - "atu" ATU address space (optional) - -- device_type: - Usage: required - Value type: - Definition: Should be "pci". As specified in snps,dw-pcie.yaml - -- #address-cells: - Usage: required - Value type: - Definition: Should be 3. As specified in snps,dw-pcie.yaml - -- #size-cells: - Usage: required - Value type: - Definition: Should be 2. As specified in snps,dw-pcie.yaml - -- ranges: - Usage: required - Value type: - Definition: As specified in snps,dw-pcie.yaml - -- interrupts: - Usage: required - Value type: - Definition: MSI interrupt - -- interrupt-names: - Usage: required - Value type: - Definition: Should contain "msi" - -- #interrupt-cells: - Usage: required - Value type: - Definition: Should be 1. As specified in snps,dw-pcie.yaml - -- interrupt-map-mask: - Usage: required - Value type: - Definition: As specified in snps,dw-pcie.yaml - -- interrupt-map: - Usage: required - Value type: - Definition: As specified in snps,dw-pcie.yaml - -- clocks: - Usage: required - Value type: - Definition: List of phandle and clock specifier pairs as listed - in clock-names property - -- clock-names: - Usage: required - Value type: - Definition: Should contain the following entries - - "iface" Configuration AHB clock - -- clock-names: - Usage: required for ipq/apq8064 - Value type: - Definition: Should contain the following entries - - "core" Clocks the pcie hw block - - "phy" Clocks the pcie PHY block - - "aux" Clocks the pcie AUX block - - "ref" Clocks the pcie ref block -- clock-names: - Usage: required for apq8084/ipq4019 - Value type: - Definition: Should contain the following entries - - "aux" Auxiliary (AUX) clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - -- clock-names: - Usage: required for msm8996/apq8096 - Value type: - Definition: Should contain the following entries - - "pipe" Pipe Clock driving internal logic - - "aux" Auxiliary (AUX) clock - - "cfg" Configuration clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - -- clock-names: - Usage: required for ipq8074 - Value type: - Definition: Should contain the following entries - - "iface" PCIe to SysNOC BIU clock - - "axi_m" AXI Master clock - - "axi_s" AXI Slave clock - - "ahb" AHB clock - - "aux" Auxiliary clock - -- clock-names: - Usage: required for ipq6018 - Value type: - Definition: Should contain the following entries - - "iface" PCIe to SysNOC BIU clock - - "axi_m" AXI Master clock - - "axi_s" AXI Slave clock - - "axi_bridge" AXI bridge clock - - "rchng" - -- clock-names: - Usage: required for qcs404 - Value type: - Definition: Should contain the following entries - - "iface" AHB clock - - "aux" Auxiliary clock - - "master_bus" AXI Master clock - - "slave_bus" AXI Slave clock - -- clock-names: - Usage: required for sdm845 - Value type: - Definition: Should contain the following entries - - "aux" Auxiliary clock - - "cfg" Configuration clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - - "slave_q2a" Slave Q2A clock - - "tbu" PCIe TBU clock - - "pipe" PIPE clock - -- clock-names: - Usage: required for sc8180x and sm8250 - Value type: - Definition: Should contain the following entries - - "aux" Auxiliary clock - - "cfg" Configuration clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - - "slave_q2a" Slave Q2A clock - - "tbu" PCIe TBU clock - - "ddrss_sf_tbu" PCIe SF TBU clock - - "pipe" PIPE clock - -- clock-names: - Usage: required for sm8450-pcie0 and sm8450-pcie1 - Value type: - Definition: Should contain the following entries - - "aux" Auxiliary clock - - "cfg" Configuration clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - - "slave_q2a" Slave Q2A clock - - "tbu" PCIe TBU clock - - "ddrss_sf_tbu" PCIe SF TBU clock - - "pipe" PIPE clock - - "pipe_mux" PIPE MUX - - "phy_pipe" PIPE output clock - - "ref" REFERENCE clock - - "aggre0" Aggre NoC PCIe0 AXI clock, only for sm8450-pcie0 - - "aggre1" Aggre NoC PCIe1 AXI clock - -- resets: - Usage: required - Value type: - Definition: List of phandle and reset specifier pairs as listed - in reset-names property - -- reset-names: - Usage: required for ipq/apq8064 - Value type: - Definition: Should contain the following entries - - "axi" AXI reset - - "ahb" AHB reset - - "por" POR reset - - "pci" PCI reset - - "phy" PHY reset - -- reset-names: - Usage: required for apq8084 - Value type: - Definition: Should contain the following entries - - "core" Core reset - -- reset-names: - Usage: required for ipq/apq8064 - Value type: - Definition: Should contain the following entries - - "axi_m" AXI master reset - - "axi_s" AXI slave reset - - "pipe" PIPE reset - - "axi_m_vmid" VMID reset - - "axi_s_xpu" XPU reset - - "parf" PARF reset - - "phy" PHY reset - - "axi_m_sticky" AXI sticky reset - - "pipe_sticky" PIPE sticky reset - - "pwr" PWR reset - - "ahb" AHB reset - - "phy_ahb" PHY AHB reset - - "ext" EXT reset - -- reset-names: - Usage: required for ipq8074 - Value type: - Definition: Should contain the following entries - - "pipe" PIPE reset - - "sleep" Sleep reset - - "sticky" Core Sticky reset - - "axi_m" AXI Master reset - - "axi_s" AXI Slave reset - - "ahb" AHB Reset - - "axi_m_sticky" AXI Master Sticky reset - -- reset-names: - Usage: required for ipq6018 - Value type: - Definition: Should contain the following entries - - "pipe" PIPE reset - - "sleep" Sleep reset - - "sticky" Core Sticky reset - - "axi_m" AXI Master reset - - "axi_s" AXI Slave reset - - "ahb" AHB Reset - - "axi_m_sticky" AXI Master Sticky reset - - "axi_s_sticky" AXI Slave Sticky reset - -- reset-names: - Usage: required for qcs404 - Value type: - Definition: Should contain the following entries - - "axi_m" AXI Master reset - - "axi_s" AXI Slave reset - - "axi_m_sticky" AXI Master Sticky reset - - "pipe_sticky" PIPE sticky reset - - "pwr" PWR reset - - "ahb" AHB reset - -- reset-names: - Usage: required for sc8180x, sdm845, sm8250 and sm8450 - Value type: - Definition: Should contain the following entries - - "pci" PCIe core reset - -- power-domains: - Usage: required for apq8084 and msm8996/apq8096 - Value type: - Definition: A phandle and power domain specifier pair to the - power domain which is responsible for collapsing - and restoring power to the peripheral - -- vdda-supply: - Usage: required - Value type: - Definition: A phandle to the core analog power supply - -- vdda_phy-supply: - Usage: required for ipq/apq8064 - Value type: - Definition: A phandle to the analog power supply for PHY - -- vdda_refclk-supply: - Usage: required for ipq/apq8064 - Value type: - Definition: A phandle to the analog power supply for IC which generates - reference clock -- vddpe-3v3-supply: - Usage: optional - Value type: - Definition: A phandle to the PCIe endpoint power supply - -- phys: - Usage: required for apq8084 and qcs404 - Value type: - Definition: List of phandle(s) as listed in phy-names property - -- phy-names: - Usage: required for apq8084 and qcs404 - Value type: - Definition: Should contain "pciephy" - -- -gpios: - Usage: optional - Value type: - Definition: List of phandle and GPIO specifier pairs. Should contain - - "perst-gpios" PCIe endpoint reset signal line - - "wake-gpios" PCIe endpoint wake signal line - -* Example for ipq/apq8064 - pcie@1b500000 { - compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie"; - reg = <0x1b500000 0x1000 - 0x1b502000 0x80 - 0x1b600000 0x100 - 0x0ff00000 0x100000>; - reg-names = "dbi", "elbi", "parf", "config"; - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ - 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc PCIE_A_CLK>, - <&gcc PCIE_H_CLK>, - <&gcc PCIE_PHY_CLK>, - <&gcc PCIE_AUX_CLK>, - <&gcc PCIE_ALT_REF_CLK>; - clock-names = "core", "iface", "phy", "aux", "ref"; - resets = <&gcc PCIE_ACLK_RESET>, - <&gcc PCIE_HCLK_RESET>, - <&gcc PCIE_POR_RESET>, - <&gcc PCIE_PCI_RESET>, - <&gcc PCIE_PHY_RESET>, - <&gcc PCIE_EXT_RESET>; - reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; - pinctrl-0 = <&pcie_pins_default>; - pinctrl-names = "default"; - }; - -* Example for apq8084 - pcie0@fc520000 { - compatible = "qcom,pcie-apq8084", "snps,dw-pcie"; - reg = <0xfc520000 0x2000>, - <0xff000000 0x1000>, - <0xff001000 0x1000>, - <0xff002000 0x2000>; - reg-names = "parf", "dbi", "elbi", "config"; - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */ - 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */ - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>; - clock-names = "iface", "master_bus", "slave_bus", "aux"; - resets = <&gcc GCC_PCIE_0_BCR>; - reset-names = "core"; - power-domains = <&gcc PCIE0_GDSC>; - vdda-supply = <&pma8084_l3>; - phys = <&pciephy0>; - phy-names = "pciephy"; - perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_pins_default>; - pinctrl-names = "default"; - }; diff --git a/dts/Bindings/pci/qcom,pcie.yaml b/dts/Bindings/pci/qcom,pcie.yaml new file mode 100644 index 0000000000..0b69b12b84 --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie.yaml @@ -0,0 +1,714 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCI express root complex + +maintainers: + - Bjorn Andersson + - Stanimir Varbanov + +description: | + Qualcomm PCIe root complex controller is bansed on the Synopsys DesignWare + PCIe IP. + +properties: + compatible: + enum: + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064-v2 + - qcom,pcie-apq8064 + - qcom,pcie-apq8084 + - qcom,pcie-msm8996 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sdm845 + - qcom,pcie-sm8150 + - qcom,pcie-sm8250 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + - qcom,pcie-ipq6018 + + reg: + minItems: 4 + maxItems: 5 + + reg-names: + minItems: 4 + maxItems: 5 + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: msi + + # Common definitions for clocks, clock-names and reset. + # Platform constraints are described later. + clocks: + minItems: 3 + maxItems: 12 + + clock-names: + minItems: 3 + maxItems: 12 + + resets: + minItems: 1 + maxItems: 12 + + resets-names: + minItems: 1 + maxItems: 12 + + vdda-supply: + description: A phandle to the core analog power supply + + vdda_phy-supply: + description: A phandle to the core analog power supply for PHY + + vdda_refclk-supply: + description: A phandle to the core analog power supply for IC which generates reference clock + + vddpe-3v3-supply: + description: A phandle to the PCIe endpoint power supply + + phys: + maxItems: 1 + + phy-names: + items: + - const: pciephy + + power-domains: + maxItems: 1 + + perst-gpios: + description: GPIO controlled connection to PERST# signal + maxItems: 1 + + wake-gpios: + description: GPIO controlled connection to WAKE# signal + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + then: + properties: + reg: + minItems: 4 + maxItems: 4 + reg-names: + items: + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: parf # Qualcomm specific registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq6018 + then: + properties: + reg: + minItems: 5 + maxItems: 5 + reg-names: + items: + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: parf # Qualcomm specific registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8084 + - qcom,pcie-msm8996 + - qcom,pcie-sdm845 + then: + properties: + reg: + minItems: 4 + maxItems: 4 + reg-names: + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sm8250 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + then: + properties: + reg: + minItems: 5 + maxItems: 5 + reg-names: + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + then: + properties: + clocks: + minItems: 3 + maxItems: 5 + clock-names: + minItems: 3 + items: + - const: core # Clocks the pcie hw block + - const: iface # Configuration AHB clock + - const: phy # Clocks the pcie PHY block + - const: aux # Clocks the pcie AUX block, not on apq8064 + - const: ref # Clocks the pcie ref block, not on apq8064 + resets: + minItems: 5 + maxItems: 6 + reset-names: + minItems: 5 + items: + - const: axi # AXI reset + - const: ahb # AHB reset + - const: por # POR reset + - const: pci # PCI reset + - const: phy # PHY reset + - const: ext # EXT reset, not on apq8064 + required: + - vdda-supply + - vdda_phy-supply + - vdda_refclk-supply + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8084 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: iface # Configuration AHB clock + - const: master_bus # Master AXI clock + - const: slave_bus # Slave AXI clock + - const: aux # Auxiliary (AUX) clock + resets: + maxItems: 1 + reset-names: + items: + - const: core # Core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq4019 + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: aux # Auxiliary (AUX) clock + - const: master_bus # Master AXI clock + - const: slave_bus # Slave AXI clock + resets: + minItems: 12 + maxItems: 12 + reset-names: + items: + - const: axi_m # AXI master reset + - const: axi_s # AXI slave reset + - const: pipe # PIPE reset + - const: axi_m_vmid # VMID reset + - const: axi_s_xpu # XPU reset + - const: parf # PARF reset + - const: phy # PHY reset + - const: axi_m_sticky # AXI sticky reset + - const: pipe_sticky # PIPE sticky reset + - const: pwr # PWR reset + - const: ahb # AHB reset + - const: phy_ahb # PHY AHB reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-msm8996 + then: + oneOf: + - properties: + clock-names: + items: + - const: pipe # Pipe Clock driving internal logic + - const: aux # Auxiliary (AUX) clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - properties: + clock-names: + items: + - const: pipe # Pipe Clock driving internal logic + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: cfg # Configuration clock + - const: aux # Auxiliary (AUX) clock + properties: + clocks: + minItems: 5 + maxItems: 5 + resets: false + reset-names: false + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq8074 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: iface # PCIe to SysNOC BIU clock + - const: axi_m # AXI Master clock + - const: axi_s # AXI Slave clock + - const: ahb # AHB clock + - const: aux # Auxiliary clock + resets: + minItems: 7 + maxItems: 7 + reset-names: + items: + - const: pipe # PIPE reset + - const: sleep # Sleep reset + - const: sticky # Core Sticky reset + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: ahb # AHB Reset + - const: axi_m_sticky # AXI Master Sticky reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq6018 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: iface # PCIe to SysNOC BIU clock + - const: axi_m # AXI Master clock + - const: axi_s # AXI Slave clock + - const: axi_bridge # AXI bridge clock + - const: rchng + resets: + minItems: 8 + maxItems: 8 + reset-names: + items: + - const: pipe # PIPE reset + - const: sleep # Sleep reset + - const: sticky # Core Sticky reset + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: ahb # AHB Reset + - const: axi_m_sticky # AXI Master Sticky reset + - const: axi_s_sticky # AXI Slave Sticky reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-qcs404 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: iface # AHB clock + - const: aux # Auxiliary clock + - const: master_bus # AXI Master clock + - const: slave_bus # AXI Slave clock + resets: + minItems: 6 + maxItems: 6 + reset-names: + items: + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: axi_m_sticky # AXI Master Sticky reset + - const: pipe_sticky # PIPE sticky reset + - const: pwr # PWR reset + - const: ahb # AHB reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc7280 + then: + properties: + clocks: + minItems: 11 + maxItems: 11 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sdm845 + then: + oneOf: + # Unfortunately the "optional" ref clock is used in the middle of the list + - properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + - properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + properties: + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc8180x + - qcom,pcie-sm8150 + - qcom,pcie-sm8250 + then: + oneOf: + # Unfortunately the "optional" ref clock is used in the middle of the list + - properties: + clocks: + minItems: 9 + maxItems: 9 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + properties: + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8450-pcie0 + then: + properties: + clocks: + minItems: 12 + maxItems: 12 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre0 # Aggre NoC PCIe0 AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8450-pcie1 + then: + properties: + clocks: + minItems: 11 + maxItems: 11 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + then: + required: + - power-domains + + - if: + not: + properties: + compatibles: + contains: + enum: + - qcom,pcie-msm8996 + then: + required: + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + #include + pcie@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000>, + <0x1b502000 0x80>, + <0x1b600000 0x100>, + <0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>, + <0x82000000 0 0 0x08000000 0 0x07e00000>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc 41>, + <&gcc 43>, + <&gcc 44>, + <&gcc 42>, + <&gcc 248>; + clock-names = "core", "iface", "phy", "aux", "ref"; + resets = <&gcc 27>, + <&gcc 26>, + <&gcc 25>, + <&gcc 24>, + <&gcc 23>, + <&gcc 22>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + pinctrl-0 = <&pcie_pins_default>; + pinctrl-names = "default"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&ext_3p3v>; + }; + - | + #include + #include + pcie@fc520000 { + compatible = "qcom,pcie-apq8084"; + reg = <0xfc520000 0x2000>, + <0xff000000 0x1000>, + <0xff001000 0x1000>, + <0xff002000 0x2000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0xff200000 0 0x00100000>, + <0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc 324>, + <&gcc 325>, + <&gcc 327>, + <&gcc 323>; + clock-names = "iface", "master_bus", "slave_bus", "aux"; + resets = <&gcc 81>; + reset-names = "core"; + power-domains = <&gcc 1>; + vdda-supply = <&pma8084_l3>; + phys = <&pciephy0>; + phy-names = "pciephy"; + perst-gpios = <&tlmm 70 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_pins_default>; + pinctrl-names = "default"; + }; +... diff --git a/dts/Bindings/pci/rockchip-dw-pcie.yaml b/dts/Bindings/pci/rockchip-dw-pcie.yaml index 142bbe5777..bc0a9d1db7 100644 --- a/dts/Bindings/pci/rockchip-dw-pcie.yaml +++ b/dts/Bindings/pci/rockchip-dw-pcie.yaml @@ -19,20 +19,10 @@ description: |+ allOf: - $ref: /schemas/pci/pci-bus.yaml# -# We need a select here so we don't match all nodes with 'snps,dw-pcie' -select: - properties: - compatible: - contains: - const: rockchip,rk3568-pcie - required: - - compatible - properties: compatible: items: - const: rockchip,rk3568-pcie - - const: snps,dw-pcie reg: items: @@ -110,7 +100,7 @@ examples: #size-cells = <2>; pcie3x2: pcie@fe280000 { - compatible = "rockchip,rk3568-pcie", "snps,dw-pcie"; + compatible = "rockchip,rk3568-pcie"; reg = <0x3 0xc0800000 0x0 0x390000>, <0x0 0xfe280000 0x0 0x10000>, <0x3 0x80000000 0x0 0x100000>; diff --git a/dts/Bindings/pci/snps,dw-pcie-ep.yaml b/dts/Bindings/pci/snps,dw-pcie-ep.yaml index e59059ab5b..b78535040f 100644 --- a/dts/Bindings/pci/snps,dw-pcie-ep.yaml +++ b/dts/Bindings/pci/snps,dw-pcie-ep.yaml @@ -55,13 +55,15 @@ properties: Translation Unit) registers. num-ib-windows: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 description: number of inbound address translation windows - maxItems: 1 deprecated: true num-ob-windows: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 description: number of outbound address translation windows - maxItems: 1 deprecated: true required: diff --git a/dts/Bindings/pci/snps,dw-pcie.yaml b/dts/Bindings/pci/snps,dw-pcie.yaml index a5345c4947..c90e5e2d25 100644 --- a/dts/Bindings/pci/snps,dw-pcie.yaml +++ b/dts/Bindings/pci/snps,dw-pcie.yaml @@ -68,6 +68,8 @@ properties: Translation Unit) registers. num-viewport: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 description: | number of view ports configured in hardware. If a platform does not specify it, the driver autodetects it. diff --git a/dts/Bindings/pci/socionext,uniphier-pcie.yaml b/dts/Bindings/pci/socionext,uniphier-pcie.yaml new file mode 100644 index 0000000000..638b99db04 --- /dev/null +++ b/dts/Bindings/pci/socionext,uniphier-pcie.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier PCIe host controller + +description: | + UniPhier PCIe host controller is based on the Synopsys DesignWare + PCI core. It shares common features with the PCIe DesignWare core and + inherits common properties defined in + Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. + +maintainers: + - Kunihiko Hayashi + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + enum: + - socionext,uniphier-pcie + + reg: + minItems: 3 + maxItems: 4 + + reg-names: + minItems: 3 + items: + - const: dbi + - const: link + - const: config + - const: atu + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + num-viewport: true + + num-lanes: true + + phys: + maxItems: 1 + + phy-names: + const: pcie-phy + + interrupt-controller: + type: object + additionalProperties: false + + properties: + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - clocks + - resets + +unevaluatedProperties: false + +examples: + - | + bus { + gic: interrupt-controller { + interrupt-controller; + #interrupt-cells = <3>; + }; + }; + + pcie: pcie@66000000 { + compatible = "socionext,uniphier-pcie"; + reg-names = "dbi", "link", "config"; + reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + num-lanes = <1>; + num-viewport = <1>; + bus-range = <0x0 0xff>; + device_type = "pci"; + ranges = <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>, + <0x82000000 0 0x00000000 0x20000000 0 0x0ffe0000>; + phy-names = "pcie-phy"; + phys = <&pcie_phy>; + #interrupt-cells = <1>; + interrupt-names = "dma", "msi"; + interrupt-parent = <&gic>; + interrupts = <0 224 4>, <0 225 4>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <0 226 4>; + }; + }; diff --git a/dts/Bindings/pci/uniphier-pcie.txt b/dts/Bindings/pci/uniphier-pcie.txt deleted file mode 100644 index 359585db04..0000000000 --- a/dts/Bindings/pci/uniphier-pcie.txt +++ /dev/null @@ -1,82 +0,0 @@ -Socionext UniPhier PCIe host controller bindings - -This describes the devicetree bindings for PCIe host controller implemented -on Socionext UniPhier SoCs. - -UniPhier PCIe host controller is based on the Synopsys DesignWare PCI core. -It shares common functions with the PCIe DesignWare core driver and inherits -common properties defined in -Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. - -Required properties: -- compatible: Should be "socionext,uniphier-pcie". -- reg: Specifies offset and length of the register set for the device. - According to the reg-names, appropriate register sets are required. -- reg-names: Must include the following entries: - "dbi" - controller configuration registers - "link" - SoC-specific glue layer registers - "config" - PCIe configuration space - "atu" - iATU registers for DWC version 4.80 or later -- clocks: A phandle to the clock gate for PCIe glue layer including - the host controller. -- resets: A phandle to the reset line for PCIe glue layer including - the host controller. -- interrupts: A list of interrupt specifiers. According to the - interrupt-names, appropriate interrupts are required. -- interrupt-names: Must include the following entries: - "dma" - DMA interrupt - "msi" - MSI interrupt - -Optional properties: -- phys: A phandle to generic PCIe PHY. According to the phy-names, appropriate - phys are required. -- phy-names: Must be "pcie-phy". - -Required sub-node: -- legacy-interrupt-controller: Specifies interrupt controller for legacy PCI - interrupts. - -Required properties for legacy-interrupt-controller: -- interrupt-controller: identifies the node as an interrupt controller. -- #interrupt-cells: specifies the number of cells needed to encode an - interrupt source. The value must be 1. -- interrupt-parent: Phandle to the parent interrupt controller. -- interrupts: An interrupt specifier for legacy interrupt. - -Example: - - pcie: pcie@66000000 { - compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; - status = "disabled"; - reg-names = "dbi", "link", "config"; - reg = <0x66000000 0x1000>, <0x66010000 0x10000>, - <0x2fff0000 0x10000>; - #address-cells = <3>; - #size-cells = <2>; - clocks = <&sys_clk 24>; - resets = <&sys_rst 24>; - num-lanes = <1>; - num-viewport = <1>; - bus-range = <0x0 0xff>; - device_type = "pci"; - ranges = - /* downstream I/O */ - <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000 - /* non-prefetchable memory */ - 0x82000000 0 0x00000000 0x20000000 0 0x0ffe0000>; - #interrupt-cells = <1>; - interrupt-names = "dma", "msi"; - interrupts = <0 224 4>, <0 225 4>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ - <0 0 0 2 &pcie_intc 1>, /* INTB */ - <0 0 0 3 &pcie_intc 2>, /* INTC */ - <0 0 0 4 &pcie_intc 3>; /* INTD */ - - pcie_intc: legacy-interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <0 226 4>; - }; - }; diff --git a/dts/Bindings/pci/xilinx-versal-cpm.yaml b/dts/Bindings/pci/xilinx-versal-cpm.yaml index 32f4641085..cca395317a 100644 --- a/dts/Bindings/pci/xilinx-versal-cpm.yaml +++ b/dts/Bindings/pci/xilinx-versal-cpm.yaml @@ -18,13 +18,13 @@ properties: reg: items: - - description: Configuration space region and bridge registers. - description: CPM system level control and status registers. + - description: Configuration space region and bridge registers. reg-names: items: - - const: cfg - const: cpm_slcr + - const: cfg interrupts: maxItems: 1 @@ -86,9 +86,9 @@ examples: ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>, <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>; msi-map = <0x0 &its_gic 0x0 0x10000>; - reg = <0x6 0x00000000 0x0 0x10000000>, - <0x0 0xfca10000 0x0 0x1000>; - reg-names = "cfg", "cpm_slcr"; + reg = <0x0 0xfca10000 0x0 0x1000>, + <0x6 0x00000000 0x0 0x10000000>; + reg-names = "cpm_slcr", "cfg"; pcie_intc_0: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; diff --git a/dts/Bindings/perf/arm,cmn.yaml b/dts/Bindings/perf/arm,cmn.yaml index 2d4219ec7e..2e51072e79 100644 --- a/dts/Bindings/perf/arm,cmn.yaml +++ b/dts/Bindings/perf/arm,cmn.yaml @@ -14,6 +14,8 @@ properties: compatible: enum: - arm,cmn-600 + - arm,cmn-650 + - arm,cmn-700 - arm,ci-700 reg: diff --git a/dts/Bindings/perf/spe-pmu.yaml b/dts/Bindings/perf/spe-pmu.yaml new file mode 100644 index 0000000000..7d74152f43 --- /dev/null +++ b/dts/Bindings/perf/spe-pmu.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/spe-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU) + +maintainers: + - Will Deacon + +description: + ARMv8.2 introduces the optional Statistical Profiling Extension for collecting + performance sample data using an in-memory trace buffer. + +properties: + compatible: + const: arm,statistical-profiling-extension-v1 + + interrupts: + maxItems: 1 + description: | + The PPI to signal SPE events. For heterogeneous systems where SPE is only + supported on a subset of the CPUs, please consult the arm,gic-v3 binding + for details on describing a PPI partition. + +additionalProperties: false + +required: + - compatible + - interrupts + +examples: + - | + #include + + spe-pmu { + compatible = "arm,statistical-profiling-extension-v1"; + interrupts = ; + }; diff --git a/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml index d0b541a461..22636c9fda 100644 --- a/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml +++ b/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml @@ -37,6 +37,18 @@ properties: resets: maxItems: 1 + allwinner,direction: + $ref: '/schemas/types.yaml#/definitions/string' + description: | + Direction of the D-PHY: + - "rx" for receiving (e.g. when used with MIPI CSI-2); + - "tx" for transmitting (e.g. when used with MIPI DSI). + + enum: + - tx + - rx + default: tx + required: - "#phy-cells" - compatible diff --git a/dts/Bindings/phy/marvell,armada-3700-utmi-phy.yaml b/dts/Bindings/phy/marvell,armada-3700-utmi-phy.yaml index 2437c36833..632d61c07f 100644 --- a/dts/Bindings/phy/marvell,armada-3700-utmi-phy.yaml +++ b/dts/Bindings/phy/marvell,armada-3700-utmi-phy.yaml @@ -45,7 +45,7 @@ additionalProperties: false examples: - | usb2_utmi_host_phy: phy@5f000 { - compatible = "marvell,armada-3700-utmi-host-phy"; + compatible = "marvell,a3700-utmi-host-phy"; reg = <0x5f000 0x800>; marvell,usb-misc-reg = <&usb2_syscon>; #phy-cells = <0>; diff --git a/dts/Bindings/phy/mixel,mipi-dsi-phy.txt b/dts/Bindings/phy/mixel,mipi-dsi-phy.txt deleted file mode 100644 index 9b23407233..0000000000 --- a/dts/Bindings/phy/mixel,mipi-dsi-phy.txt +++ /dev/null @@ -1,29 +0,0 @@ -Mixel DSI PHY for i.MX8 - -The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the -MIPI-DSI IP from Northwest Logic). It represents the physical layer for the -electrical signals for DSI. - -Required properties: -- compatible: Must be: - - "fsl,imx8mq-mipi-dphy" -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Must contain the following entries: - - "phy_ref": phandle and specifier referring to the DPHY ref clock -- reg: the register range of the PHY controller -- #phy-cells: number of cells in PHY, as defined in - Documentation/devicetree/bindings/phy/phy-bindings.txt - this must be <0> - -Optional properties: -- power-domains: phandle to power domain - -Example: - dphy: dphy@30a0030 { - compatible = "fsl,imx8mq-mipi-dphy"; - clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; - clock-names = "phy_ref"; - reg = <0x30a00300 0x100>; - power-domains = <&pd_mipi0>; - #phy-cells = <0>; - }; diff --git a/dts/Bindings/phy/mixel,mipi-dsi-phy.yaml b/dts/Bindings/phy/mixel,mipi-dsi-phy.yaml new file mode 100644 index 0000000000..786cfd71cb --- /dev/null +++ b/dts/Bindings/phy/mixel,mipi-dsi-phy.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mixel,mipi-dsi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mixel DSI PHY for i.MX8 + +maintainers: + - Guido Günther + +description: | + The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the + MIPI-DSI IP from Northwest Logic). It represents the physical layer for the + electrical signals for DSI. + + The Mixel PHY IP block found on i.MX8qxp is a combo PHY that can work + in either MIPI-DSI PHY mode or LVDS PHY mode. + +properties: + compatible: + enum: + - fsl,imx8mq-mipi-dphy + - fsl,imx8qxp-mipi-dphy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: phy_ref + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + assigned-clock-rates: + maxItems: 1 + + "#phy-cells": + const: 0 + + fsl,syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle which points to Control and Status Registers(CSR) module. + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#phy-cells" + - power-domains + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8mq-mipi-dphy + then: + properties: + fsl,syscon: false + + required: + - assigned-clocks + - assigned-clock-parents + - assigned-clock-rates + + - if: + properties: + compatible: + contains: + const: fsl,imx8qxp-mipi-dphy + then: + properties: + assigned-clocks: false + assigned-clock-parents: false + assigned-clock-rates: false + + required: + - fsl,syscon + +additionalProperties: false + +examples: + - | + #include + dphy: dphy@30a0030 { + compatible = "fsl,imx8mq-mipi-dphy"; + reg = <0x30a00300 0x100>; + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + clock-names = "phy_ref"; + assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>; + assigned-clock-rates = <24000000>; + #phy-cells = <0>; + power-domains = <&pgc_mipi>; + }; diff --git a/dts/Bindings/phy/qcom,qmp-phy.yaml b/dts/Bindings/phy/qcom,qmp-phy.yaml index e20d9b087b..8b850c5ab1 100644 --- a/dts/Bindings/phy/qcom,qmp-phy.yaml +++ b/dts/Bindings/phy/qcom,qmp-phy.yaml @@ -39,6 +39,7 @@ properties: - qcom,sdm845-qmp-usb3-phy - qcom,sdm845-qmp-usb3-uni-phy - qcom,sm6115-qmp-ufs-phy + - qcom,sm6350-qmp-ufs-phy - qcom,sm8150-qmp-ufs-phy - qcom,sm8150-qmp-usb3-phy - qcom,sm8150-qmp-usb3-uni-phy @@ -57,6 +58,7 @@ properties: - qcom,sm8450-qmp-usb3-phy - qcom,sdx55-qmp-pcie-phy - qcom,sdx55-qmp-usb3-uni-phy + - qcom,sdx65-qmp-usb3-uni-phy reg: minItems: 1 @@ -163,6 +165,7 @@ allOf: contains: enum: - qcom,sdx55-qmp-usb3-uni-phy + - qcom,sdx65-qmp-usb3-uni-phy then: properties: clocks: @@ -279,6 +282,7 @@ allOf: enum: - qcom,msm8998-qmp-ufs-phy - qcom,sdm845-qmp-ufs-phy + - qcom,sm6350-qmp-ufs-phy - qcom,sm8150-qmp-ufs-phy - qcom,sm8250-qmp-ufs-phy - qcom,sc8180x-qmp-ufs-phy diff --git a/dts/Bindings/phy/renesas,usb2-phy.yaml b/dts/Bindings/phy/renesas,usb2-phy.yaml index 16807bbbdc..f82649a55e 100644 --- a/dts/Bindings/phy/renesas,usb2-phy.yaml +++ b/dts/Bindings/phy/renesas,usb2-phy.yaml @@ -32,6 +32,7 @@ properties: - items: - enum: + - renesas,usb2-phy-r9a07g043 # RZ/G2UL - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC} - renesas,usb2-phy-r9a07g054 # RZ/V2L - const: renesas,rzg2l-usb2-phy diff --git a/dts/Bindings/phy/socionext,uniphier-ahci-phy.yaml b/dts/Bindings/phy/socionext,uniphier-ahci-phy.yaml index 3b400a85b4..a3cd45acea 100644 --- a/dts/Bindings/phy/socionext,uniphier-ahci-phy.yaml +++ b/dts/Bindings/phy/socionext,uniphier-ahci-phy.yaml @@ -30,32 +30,79 @@ properties: minItems: 1 maxItems: 2 - clock-names: - oneOf: - - items: # for PXs2 - - const: link - - items: # for Pro4 - - const: link - - const: gio - - items: # for others - - const: link - - const: phy + clock-names: true resets: minItems: 2 - maxItems: 5 + maxItems: 6 - reset-names: - oneOf: - - items: # for Pro4 - - const: link - - const: gio - - const: pm - - const: tx - - const: rx - - items: # for others - - const: link - - const: phy + reset-names: true + +allOf: + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pro4-ahci-phy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: link + - const: gio + resets: + minItems: 6 + maxItems: 6 + reset-names: + items: + - const: link + - const: gio + - const: phy + - const: pm + - const: tx + - const: rx + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pxs2-ahci-phy + then: + properties: + clocks: + maxItems: 1 + clock-names: + const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: link + - const: phy + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pxs3-ahci-phy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: link + - const: phy + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: link + - const: phy required: - compatible diff --git a/dts/Bindings/phy/socionext,uniphier-pcie-phy.yaml b/dts/Bindings/phy/socionext,uniphier-pcie-phy.yaml index fbb71d6dd5..b3ed2f74a4 100644 --- a/dts/Bindings/phy/socionext,uniphier-pcie-phy.yaml +++ b/dts/Bindings/phy/socionext,uniphier-pcie-phy.yaml @@ -31,28 +31,51 @@ properties: minItems: 1 maxItems: 2 - clock-names: - oneOf: - - items: # for Pro5 - - const: gio - - const: link - - const: link # for others + clock-names: true resets: minItems: 1 maxItems: 2 - reset-names: - oneOf: - - items: # for Pro5 - - const: gio - - const: link - - const: link # for others + reset-names: true socionext,syscon: $ref: /schemas/types.yaml#/definitions/phandle description: A phandle to system control to set configurations for phy +allOf: + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pro5-pcie-phy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: link + else: + properties: + clocks: + maxItems: 1 + clock-names: + const: link + resets: + maxItems: 1 + reset-names: + const: link + required: - compatible - reg diff --git a/dts/Bindings/phy/socionext,uniphier-usb2-phy.yaml b/dts/Bindings/phy/socionext,uniphier-usb2-phy.yaml index 479b203f7a..63dab914a4 100644 --- a/dts/Bindings/phy/socionext,uniphier-usb2-phy.yaml +++ b/dts/Bindings/phy/socionext,uniphier-usb2-phy.yaml @@ -43,6 +43,9 @@ patternProperties: "#phy-cells": const: 0 + vbus-supply: + description: A phandle to the regulator for USB VBUS, only for USB host + required: - reg - "#phy-cells" diff --git a/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml index 33946efcac..21e4414eea 100644 --- a/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml +++ b/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml @@ -31,27 +31,15 @@ properties: const: 0 clocks: - minItems: 1 + minItems: 2 maxItems: 3 - clock-names: - oneOf: - - const: link # for PXs2 - - items: # for PXs3 with phy-ext - - const: link - - const: phy - - const: phy-ext - - items: # for others - - const: link - - const: phy + clock-names: true resets: maxItems: 2 - reset-names: - items: - - const: link - - const: phy + reset-names: true vbus-supply: description: A phandle to the regulator for USB VBUS @@ -74,6 +62,77 @@ properties: required for each port, if any one is omitted, the trimming data of the port will not be set at all. +allOf: + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pro5-usb3-hsphy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: link + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pxs2-usb3-hsphy + - socionext,uniphier-ld20-usb3-hsphy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: link + - const: phy + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: link + - const: phy + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pxs3-usb3-hsphy + - socionext,uniphier-nx1-usb3-hsphy + then: + properties: + clocks: + minItems: 2 + maxItems: 3 + clock-names: + minItems: 2 + items: + - const: link + - const: phy + - const: phy-ext + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: link + - const: phy + required: - compatible - reg diff --git a/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml index 92d46eb913..4c26d2d230 100644 --- a/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml +++ b/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml @@ -35,33 +35,88 @@ properties: minItems: 2 maxItems: 3 - clock-names: - oneOf: - - items: # for Pro4, Pro5 - - const: gio - - const: link - - items: # for PXs3 with phy-ext - - const: link - - const: phy - - const: phy-ext - - items: # for others - - const: link - - const: phy + clock-names: true resets: maxItems: 2 - reset-names: - oneOf: - - items: # for Pro4,Pro5 - - const: gio - - const: link - - items: # for others - - const: link - - const: phy + reset-names: true vbus-supply: - description: A phandle to the regulator for USB VBUS + description: A phandle to the regulator for USB VBUS, only for USB host + +allOf: + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pro4-usb3-ssphy + - socionext,uniphier-pro5-usb3-ssphy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: link + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pxs2-usb3-ssphy + - socionext,uniphier-ld20-usb3-ssphy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: link + - const: phy + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: link + - const: phy + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pxs3-usb3-ssphy + - socionext,uniphier-nx1-usb3-ssphy + then: + properties: + clocks: + minItems: 2 + maxItems: 3 + clock-names: + minItems: 2 + items: + - const: link + - const: phy + - const: phy-ext + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: link + - const: phy required: - compatible @@ -71,7 +126,6 @@ required: - clock-names - resets - reset-names - - vbus-supply additionalProperties: false diff --git a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 7c25c8d511..9db904a528 100644 --- a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -76,73 +76,24 @@ additionalProperties: false examples: - | #include - apb { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - syscon: scu@1e6e2000 { - compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; - reg = <0x1e6e2000 0x1a8>; - #clock-cells = <1>; - #reset-cells = <1>; - - pinctrl: pinctrl { - compatible = "aspeed,ast2500-pinctrl"; - aspeed,external-nodes = <&gfx>, <&lhc>; - - pinctrl_i2c3_default: i2c3_default { - function = "I2C3"; - groups = "I2C3"; - }; - - pinctrl_gpioh0_unbiased_default: gpioh0 { - pins = "A18"; - bias-disable; - }; + scu@1e6e2000 { + compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + #clock-cells = <1>; + #reset-cells = <1>; + + pinctrl: pinctrl { + compatible = "aspeed,ast2500-pinctrl"; + aspeed,external-nodes = <&gfx>, <&lhc>; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; }; - }; - - gfx: display@1e6e6000 { - compatible = "aspeed,ast2500-gfx", "syscon"; - reg = <0x1e6e6000 0x1000>; - reg-io-width = <4>; - clocks = <&syscon ASPEED_CLK_GATE_D1CLK>; - resets = <&syscon ASPEED_RESET_CRT1>; - interrupts = <0x19>; - syscon = <&syscon>; - memory-region = <&gfx_memory>; - }; - }; - - lpc: lpc@1e789000 { - compatible = "aspeed,ast2500-lpc", "simple-mfd"; - reg = <0x1e789000 0x1000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x1e789000 0x1000>; - - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; - - lhc: lhc@20 { - compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24>, <0x48 0x8>; + pinctrl_gpioh0_unbiased_default: gpioh0 { + pins = "A18"; + bias-disable; }; }; }; - - gfx_memory: framebuffer { - size = <0x01000000>; - alignment = <0x01000000>; - compatible = "shared-dma-pool"; - reusable; - }; diff --git a/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml b/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml index 53e963e090..533b4cfe33 100644 --- a/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml @@ -120,6 +120,7 @@ patternProperties: input-schmitt-disable: true input-polarity-invert: + type: boolean description: Enable or disable pin input polarity inversion. @@ -132,6 +133,7 @@ patternProperties: output-low: true output-polarity-invert: + type: boolean description: Enable or disable pin output polarity inversion. diff --git a/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt b/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt deleted file mode 100644 index bfab5ca49f..0000000000 --- a/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt +++ /dev/null @@ -1,87 +0,0 @@ -* Freescale i.MX7 Dual IOMUX Controller - -iMX7D supports two iomuxc controllers, fsl,imx7d-iomuxc controller is similar -as previous iMX SoC generation and fsl,imx7d-iomuxc-lpsr which provides low -power state retention capabilities on gpios that are part of iomuxc-lpsr -(GPIO1_IO7..GPIO1_IO0). While iomuxc-lpsr provides its own set of registers for -mux and pad control settings, it shares the input select register from main -iomuxc controller for daisy chain settings, the fsl,input-sel property extends -fsl,imx-pinctrl driver to support iomuxc-lpsr controller. - -iomuxc_lpsr: iomuxc-lpsr@302c0000 { - compatible = "fsl,imx7d-iomuxc-lpsr"; - reg = <0x302c0000 0x10000>; - fsl,input-sel = <&iomuxc>; -}; - -iomuxc: iomuxc@30330000 { - compatible = "fsl,imx7d-iomuxc"; - reg = <0x30330000 0x10000>; -}; - -Peripherals using pads from iomuxc-lpsr support low state retention power -state, under LPSR mode GPIO's state of pads are retain. - -Please refer to fsl,imx-pinctrl.txt in this directory for common binding part -and usage. - -Required properties: -- compatible: "fsl,imx7d-iomuxc" for main IOMUXC controller, or - "fsl,imx7d-iomuxc-lpsr" for Low Power State Retention IOMUXC controller. -- fsl,pins: each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers are specified using a PIN_FUNC_ID macro, which can be found in - imx7d-pinfunc.h under device tree source folder. The last integer CONFIG is - the pad setting value like pull-up on this pin. Please refer to i.MX7 Dual - Reference Manual for detailed CONFIG settings. -- fsl,input-sel: required property for iomuxc-lpsr controller, this property is - a phandle for main iomuxc controller which shares the input select register for - daisy chain settings. - -CONFIG bits definition: -PAD_CTL_PUS_100K_DOWN (0 << 5) -PAD_CTL_PUS_5K_UP (1 << 5) -PAD_CTL_PUS_47K_UP (2 << 5) -PAD_CTL_PUS_100K_UP (3 << 5) -PAD_CTL_PUE (1 << 4) -PAD_CTL_HYS (1 << 3) -PAD_CTL_SRE_SLOW (1 << 2) -PAD_CTL_SRE_FAST (0 << 2) -PAD_CTL_DSE_X1 (0 << 0) -PAD_CTL_DSE_X4 (1 << 0) -PAD_CTL_DSE_X2 (2 << 0) -PAD_CTL_DSE_X6 (3 << 0) - -Examples: -While iomuxc-lpsr is intended to be used by dedicated peripherals to take -advantages of LPSR power mode, is also possible that an IP to use pads from -any of the iomux controllers. For example the I2C1 IP can use SCL pad from -iomuxc-lpsr controller and SDA pad from iomuxc controller as: - -i2c1: i2c@30a20000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>, <&pinctrl_i2c1_2>; -}; - -iomuxc-lpsr@302c0000 { - compatible = "fsl,imx7d-iomuxc-lpsr"; - reg = <0x302c0000 0x10000>; - fsl,input-sel = <&iomuxc>; - - pinctrl_i2c1_1: i2c1grp-1 { - fsl,pins = < - MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f - >; - }; -}; - -iomuxc@30330000 { - compatible = "fsl,imx7d-iomuxc"; - reg = <0x30330000 0x10000>; - - pinctrl_i2c1_2: i2c1grp-2 { - fsl,pins = < - MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f - >; - }; -}; diff --git a/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.yaml new file mode 100644 index 0000000000..6210386621 --- /dev/null +++ b/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx7d-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX7D IOMUX Controller + +maintainers: + - Dong Aisheng + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + oneOf: + - enum: + - fsl,imx7d-iomuxc + - fsl,imx7d-iomuxc-lpsr + + reg: + maxItems: 1 + + fsl,input-sel: + description: + phandle for main iomuxc controller which shares the input select + register for daisy chain settings. + $ref: /schemas/types.yaml#/definitions/phandle + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers are specified using a PIN_FUNC_ID macro, which can + be found in . The last integer + CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX7D Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + +if: + properties: + compatible: + contains: + enum: + - fsl,imx7d-iomuxc-lpsr + +then: + required: + - fsl,input-sel + +additionalProperties: false + +examples: + - | + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx7d-iomuxc"; + reg = <0x30330000 0x10000>; + + pinctrl_uart5: uart5grp { + fsl,pins = + <0x0160 0x03D0 0x0714 0x1 0x0 0x7e>, + <0x0164 0x03D4 0x0000 0x1 0x0 0x76>; + }; + }; + - | + iomuxc_lpsr: pinctrl@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; + + pinctrl_gpio_lpsr: gpio1-grp { + fsl,pins = + <0x0008 0x0038 0x0000 0x0 0x0 0x59>, + <0x000C 0x003C 0x0000 0x0 0x0 0x59>; + }; + }; diff --git a/dts/Bindings/pinctrl/fsl,imxrt1170.yaml b/dts/Bindings/pinctrl/fsl,imxrt1170.yaml new file mode 100644 index 0000000000..2e880b3e53 --- /dev/null +++ b/dts/Bindings/pinctrl/fsl,imxrt1170.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1170.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MXRT1170 IOMUX Controller + +maintainers: + - Giulio Benetti + - Jesse Taube + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + const: fsl,imxrt1170-iomuxc + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers are specified using a PIN_FUNC_ID macro, which can + be found in . The last + integer CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MXRT1170 Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + iomuxc: iomuxc@400e8000 { + compatible = "fsl,imxrt1170-iomuxc"; + reg = <0x400e8000 0x4000>; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = + <0x16C 0x3B0 0x620 0x0 0x0 0xf1>, + <0x170 0x3B4 0x61C 0x0 0x0 0xf1>; + }; + }; diff --git a/dts/Bindings/pinctrl/marvell,ac5-pinctrl.yaml b/dts/Bindings/pinctrl/marvell,ac5-pinctrl.yaml new file mode 100644 index 0000000000..a651b2744c --- /dev/null +++ b/dts/Bindings/pinctrl/marvell,ac5-pinctrl.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/marvell,ac5-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell AC5 pin controller + +maintainers: + - Chris Packham + +description: + Bindings for Marvell's AC5 memory-mapped pin controller. + +properties: + compatible: + items: + - const: marvell,ac5-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + marvell,function: + $ref: "/schemas/types.yaml#/definitions/string" + description: + Indicates the function to select. + enum: [ dev_init_done, ge, gpio, i2c0, i2c1, int_out, led, nand, pcie, ptp, sdio, + spi0, spi1, synce, tsen_int, uart0, uart1, uart2, uart3, uartsd, wd_int, xg ] + + marvell,pins: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Array of MPP pins to be used for the given function. + minItems: 1 + items: + enum: [ mpp0, mpp1, mpp2, mpp3, mpp4, mpp5, mpp6, mpp7, mpp8, mpp9, + mpp10, mpp11, mpp12, mpp13, mpp14, mpp15, mpp16, mpp17, mpp18, mpp19, + mpp20, mpp21, mpp22, mpp23, mpp24, mpp25, mpp26, mpp27, mpp28, mpp29, + mpp30, mpp31, mpp32, mpp33, mpp34, mpp35, mpp36, mpp37, mpp38, mpp39, + mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ] + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@80020100 { + compatible = "marvell,ac5-pinctrl"; + reg = <0x80020100 0x20>; + + i2c0_pins: i2c0-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c0"; + }; + + i2c0_gpio: i2c0-gpio-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "gpio"; + }; + }; diff --git a/dts/Bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/dts/Bindings/pinctrl/mediatek,pinctrl-mt6795.yaml new file mode 100644 index 0000000000..73ae6e1141 --- /dev/null +++ b/dts/Bindings/pinctrl/mediatek,pinctrl-mt6795.yaml @@ -0,0 +1,224 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,pinctrl-mt6795.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT6795 Pin Controller + +maintainers: + - AngeloGioacchino Del Regno + - Sean Wang + +description: | + The Mediatek's Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt6795-pinctrl + + gpio-controller: true + + '#gpio-cells': + description: | + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + const: 2 + + gpio-ranges: + description: GPIO valid number range. + maxItems: 1 + + reg: + description: + Physical address base for gpio base and eint registers. + minItems: 2 + + reg-names: + items: + - const: base + - const: eint + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + description: The interrupt outputs to sysirq. + maxItems: 1 + +# PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + additionalProperties: false + patternProperties: + '^pins': + type: object + additionalProperties: false + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and + input schmitt. + An example of using macro: + pincontroller { + /* GPIO0 set as multifunction GPIO0 */ + gpio-pins { + pins { + pinmux = ; + } + }; + /* GPIO45 set as multifunction SDA0 */ + i2c0-pins { + pins { + pinmux = ; + } + }; + }; + $ref: "pinmux-node.yaml" + + properties: + pinmux: + description: | + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in dt-bindings/pinctrl/-pinfunc.h + directly. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + bias-pull-down: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt6795 pull down PUPD/R0/R1 type define value. + description: | + For normal pull down type, it is not necessary to specify R1R0 + values; When pull down type is PUPD/R0/R1, adding R1R0 defines + will set different resistance values. + + bias-pull-up: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt6795 pull up PUPD/R0/R1 type define value. + description: | + For normal pull up type, it is not necessary to specify R1R0 + values; When pull up type is PUPD/R0/R1, adding R1R0 defines + will set different resistance values. + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + mediatek,pull-up-adv: + description: | + Pull up setings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Pull down settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + required: + - pinmux + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt6795-pinctrl"; + reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>; + reg-names = "base", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 196>; + interrupt-controller; + interrupts = ; + #interrupt-cells = <2>; + + i2c0-pins { + pins-sda-scl { + pinmux = , + ; + }; + }; + + mmc0-pins { + pins-cmd-dat { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + bias-pull-up = ; + }; + + pins-clk { + pinmux = ; + bias-pull-down = ; + }; + + pins-rst { + pinmux = ; + bias-pull-up = ; + }; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt b/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt deleted file mode 100644 index 5d84fd299c..0000000000 --- a/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt +++ /dev/null @@ -1,42 +0,0 @@ -Microsemi Ocelot pin controller Device Tree Bindings ----------------------------------------------------- - -Required properties: - - compatible : Should be "mscc,ocelot-pinctrl", - "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl", - "mscc,luton-pinctrl", "mscc,serval-pinctrl", - "microchip,lan966x-pinctrl" or "mscc,servalt-pinctrl" - - reg : Address and length of the register set for the device - - gpio-controller : Indicates this device is a GPIO controller - - #gpio-cells : Must be 2. - The first cell is the pin number and the - second cell specifies GPIO flags, as defined in - . - - gpio-ranges : Range of pins managed by the GPIO controller. - - -The ocelot-pinctrl driver uses the generic pin multiplexing and generic pin -configuration documented in pinctrl-bindings.txt. - -The following generic properties are supported: - - function - - pins - -Example: - gpio: pinctrl@71070034 { - compatible = "mscc,ocelot-pinctrl"; - reg = <0x71070034 0x28>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&gpio 0 0 22>; - - uart_pins: uart-pins { - pins = "GPIO_6", "GPIO_7"; - function = "uart"; - }; - - uart2_pins: uart2-pins { - pins = "GPIO_12", "GPIO_13"; - function = "uart2"; - }; - }; diff --git a/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.yaml new file mode 100644 index 0000000000..98d547c34e --- /dev/null +++ b/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mscc,ocelot-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi Ocelot pin controller + +maintainers: + - Alexandre Belloni + - Lars Povlsen + +properties: + compatible: + enum: + - microchip,lan966x-pinctrl + - microchip,sparx5-pinctrl + - mscc,jaguar2-pinctrl + - mscc,luton-pinctrl + - mscc,ocelot-pinctrl + - mscc,serval-pinctrl + - mscc,servalt-pinctrl + + reg: + items: + - description: Base address + - description: Extended pin configuration registers + minItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: true + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + resets: + maxItems: 1 + + reset-names: + description: Optional shared switch reset. + items: + - const: switch + +patternProperties: + '-pins$': + type: object + allOf: + - $ref: "pinmux-node.yaml" + - $ref: "pincfg-node.yaml" + + properties: + function: true + pins: true + output-high: true + output-low: true + drive-strength: true + + required: + - function + - pins + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +allOf: + - $ref: "pinctrl.yaml#" + - if: + properties: + compatible: + contains: + enum: + - microchip,lan966x-pinctrl + - microchip,sparx5-pinctrl + then: + properties: + reg: + minItems: 2 + +additionalProperties: false + +examples: + - | + gpio: pinctrl@71070034 { + compatible = "mscc,ocelot-pinctrl"; + reg = <0x71070034 0x28>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + + uart_pins: uart-pins { + pins = "GPIO_6", "GPIO_7"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_12", "GPIO_13"; + function = "uart2"; + }; + }; + +... diff --git a/dts/Bindings/pinctrl/pinctrl-mt8192.yaml b/dts/Bindings/pinctrl/pinctrl-mt8192.yaml index 3c84676a16..c90a132fbc 100644 --- a/dts/Bindings/pinctrl/pinctrl-mt8192.yaml +++ b/dts/Bindings/pinctrl/pinctrl-mt8192.yaml @@ -29,6 +29,8 @@ properties: description: gpio valid number range. maxItems: 1 + gpio-line-names: true + reg: description: | Physical address base for gpio base registers. There are 11 GPIO @@ -51,62 +53,92 @@ properties: #PIN CONFIGURATION NODES patternProperties: - '^pins': + '-pins$': type: object - description: | - A pinctrl node should contain at least one subnodes representing the - pinctrl groups available on the machine. Each subnode will list the - pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and - input schmitt. - An example of using macro: - pincontroller { - /* GPIO0 set as multifunction GPIO0 */ - state_0_node_a { - pinmux = ; - }; - /* GPIO1 set as multifunction PWM */ - state_0_node_b { - pinmux = ; - }; - }; - $ref: "pinmux-node.yaml" - - properties: - pinmux: - description: | - Integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are defined - as macros in dt-bindings/pinctrl/-pinfunc.h directly. - - drive-strength: - description: | - It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See - dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192. - enum: [2, 4, 6, 8, 10, 12, 14, 16] - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - input-enable: true - - input-disable: true - - input-schmitt-enable: true - - input-schmitt-disable: true - - required: - - pinmux - additionalProperties: false + patternProperties: + '^pins': + type: object + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and + input schmitt. + $ref: "pinmux-node.yaml" + + properties: + pinmux: + description: | + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are defined + as macros in dt-bindings/pinctrl/-pinfunc.h directly. + + drive-strength: + description: | + It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See + dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192. + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + mediatek,drive-strength-adv: + description: | + Describe the specific driving setup property. + For I2C pins, the existing generic driving setup can only support + 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they + can support 0.125/0.25/0.5/1mA adjustment. If we enable specific + driving setup, the existing generic setup will be disabled. + The specific driving setup is controlled by E1E0EN. + When E1=0/E0=0, the strength is 0.125mA. + When E1=0/E0=1, the strength is 0.25mA. + When E1=1/E0=0, the strength is 0.5mA. + When E1=1/E0=1, the strength is 1mA. + EN is used to enable or disable the specific driving setup. + Valid arguments are described as below: + 0: (E1, E0, EN) = (0, 0, 0) + 1: (E1, E0, EN) = (0, 0, 1) + 2: (E1, E0, EN) = (0, 1, 0) + 3: (E1, E0, EN) = (0, 1, 1) + 4: (E1, E0, EN) = (1, 0, 0) + 5: (E1, E0, EN) = (1, 0, 1) + 6: (E1, E0, EN) = (1, 1, 0) + 7: (E1, E0, EN) = (1, 1, 1) + So the valid arguments are from 0 to 7. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + mediatek,pull-up-adv: + description: | + Pull up settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + + additionalProperties: false allOf: - $ref: "pinctrl.yaml#" @@ -151,8 +183,17 @@ examples: interrupts = ; #interrupt-cells = <2>; - pins { - pinmux = ; - output-low; + spi1-default-pins { + pins-cs-mosi-clk { + pinmux = , + , + ; + bias-disable; + }; + + pins-miso { + pinmux = ; + bias-pull-down; + }; }; }; diff --git a/dts/Bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml deleted file mode 100644 index 5c5542f162..0000000000 --- a/dts/Bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml +++ /dev/null @@ -1,133 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) - Low Power Island (LPI) TLMM block - -maintainers: - - Srinivas Kandagatla - -description: | - This binding describes the Top Level Mode Multiplexer block found in the - LPASS LPI IP on most Qualcomm SoCs - -properties: - compatible: - const: qcom,sm8250-lpass-lpi-pinctrl - - reg: - minItems: 2 - maxItems: 2 - - clocks: - items: - - description: LPASS Core voting clock - - description: LPASS Audio voting clock - - clock-names: - items: - - const: core - - const: audio - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - -#PIN CONFIGURATION NODES -patternProperties: - '-pins$': - type: object - description: - Pinctrl node's client devices use subnodes for desired pin configuration. - Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" - - properties: - pins: - description: - List of gpio pins affected by the properties specified in this - subnode. - items: - oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9])$" - minItems: 1 - maxItems: 14 - - function: - enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, - qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, - dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, - i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, - dmic3_data, i2s2_data ] - description: - Specify the alternative function to be configured for the specified - pins. - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - required: - - pins - - function - - additionalProperties: false - -allOf: - - $ref: "pinctrl.yaml#" - -required: - - compatible - - reg - - clocks - - clock-names - - gpio-controller - - '#gpio-cells' - - gpio-ranges - -additionalProperties: false - -examples: - - | - #include - lpi_tlmm: pinctrl@33c0000 { - compatible = "qcom,sm8250-lpass-lpi-pinctrl"; - reg = <0x33c0000 0x20000>, - <0x3550000 0x10000>; - clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - clock-names = "core", "audio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&lpi_tlmm 0 0 14>; - }; diff --git a/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml b/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml index fe2bcf0694..6f2efc3772 100644 --- a/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml @@ -20,6 +20,7 @@ properties: - qcom,pm2250-gpio - qcom,pm660-gpio - qcom,pm660l-gpio + - qcom,pm6125-gpio - qcom,pm6150-gpio - qcom,pm6150l-gpio - qcom,pm6350-gpio @@ -32,6 +33,7 @@ properties: - qcom,pm8058-gpio - qcom,pm8150-gpio - qcom,pm8150b-gpio + - qcom,pm8150l-gpio - qcom,pm8226-gpio - qcom,pm8350-gpio - qcom,pm8350b-gpio @@ -49,10 +51,12 @@ properties: - qcom,pmi8994-gpio - qcom,pmi8998-gpio - qcom,pmk8350-gpio + - qcom,pmm8155au-gpio - qcom,pmr735a-gpio - qcom,pmr735b-gpio - qcom,pms405-gpio - qcom,pmx55-gpio + - qcom,pmx65-gpio - enum: - qcom,spmi-gpio @@ -71,6 +75,16 @@ properties: gpio-ranges: maxItems: 1 + gpio-line-names: + minItems: 2 + maxItems: 44 + + gpio-reserved-ranges: + minItems: 1 + # maxItems as half of total number of GPIOs, as there has to be at + # least one usable GPIO between each reserved range. + maxItems: 22 + '#gpio-cells': const: 2 description: @@ -87,13 +101,278 @@ required: - gpio-ranges - interrupt-controller +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8008-gpio + - qcom,pmi8950-gpio + then: + properties: + gpio-line-names: + minItems: 2 + maxItems: 2 + gpio-reserved-ranges: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8005-gpio + - qcom,pm8450-gpio + - qcom,pm8916-gpio + - qcom,pmk8350-gpio + - qcom,pmr735a-gpio + - qcom,pmr735b-gpio + then: + properties: + gpio-line-names: + minItems: 4 + maxItems: 4 + gpio-reserved-ranges: + minItems: 1 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8018-gpio + - qcom,pm8019-gpio + then: + properties: + gpio-line-names: + minItems: 6 + maxItems: 6 + gpio-reserved-ranges: + minItems: 1 + maxItems: 3 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8350b-gpio + - qcom,pm8950-gpio + then: + properties: + gpio-line-names: + minItems: 8 + maxItems: 8 + gpio-reserved-ranges: + minItems: 1 + maxItems: 4 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm6350-gpio + - qcom,pm8350c-gpio + then: + properties: + gpio-line-names: + minItems: 9 + maxItems: 9 + gpio-reserved-ranges: + minItems: 1 + maxItems: 5 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm2250-gpio + - qcom,pm6150-gpio + - qcom,pm7325-gpio + - qcom,pm8150-gpio + - qcom,pm8350-gpio + - qcom,pmc8180-gpio + - qcom,pmi8994-gpio + - qcom,pmm8155au-gpio + then: + properties: + gpio-line-names: + minItems: 10 + maxItems: 10 + gpio-reserved-ranges: + minItems: 1 + maxItems: 5 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmx55-gpio + then: + properties: + gpio-line-names: + minItems: 11 + maxItems: 11 + gpio-reserved-ranges: + minItems: 1 + maxItems: 6 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660l-gpio + - qcom,pm6150l-gpio + - qcom,pm8038-gpio + - qcom,pm8150b-gpio + - qcom,pm8150l-gpio + - qcom,pmc8180c-gpio + - qcom,pms405-gpio + then: + properties: + gpio-line-names: + minItems: 12 + maxItems: 12 + gpio-reserved-ranges: + minItems: 1 + maxItems: 6 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660-gpio + then: + properties: + gpio-line-names: + minItems: 13 + maxItems: 13 + gpio-reserved-ranges: + minItems: 1 + maxItems: 7 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmi8998-gpio + then: + properties: + gpio-line-names: + minItems: 14 + maxItems: 14 + gpio-reserved-ranges: + minItems: 1 + maxItems: 7 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmx65-gpio + then: + properties: + gpio-line-names: + minItems: 16 + maxItems: 16 + gpio-reserved-ranges: + minItems: 1 + maxItems: 8 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8994-gpio + - qcom,pma8084-gpio + then: + properties: + gpio-line-names: + minItems: 22 + maxItems: 22 + gpio-reserved-ranges: + minItems: 1 + maxItems: 11 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8998-gpio + then: + properties: + gpio-line-names: + minItems: 26 + maxItems: 26 + gpio-reserved-ranges: + minItems: 1 + maxItems: 13 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8941-gpio + then: + properties: + gpio-line-names: + minItems: 36 + maxItems: 36 + gpio-reserved-ranges: + minItems: 1 + maxItems: 18 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8917-gpio + then: + properties: + gpio-line-names: + minItems: 38 + maxItems: 38 + gpio-reserved-ranges: + minItems: 1 + maxItems: 19 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8058-gpio + - qcom,pm8921-gpio + then: + properties: + gpio-line-names: + minItems: 44 + maxItems: 44 + gpio-reserved-ranges: + minItems: 1 + maxItems: 22 + patternProperties: '-state$': oneOf: - $ref: "#/$defs/qcom-pmic-gpio-state" - patternProperties: - ".*": + "(pinconf|-pins)$": $ref: "#/$defs/qcom-pmic-gpio-state" + additionalProperties: false $defs: qcom-pmic-gpio-state: @@ -106,6 +385,7 @@ $defs: description: List of gpio pins affected by the properties specified in this subnode. Valid pins are + - gpio1-gpio9 for pm6125 - gpio1-gpio10 for pm6150 - gpio1-gpio12 for pm6150l - gpio1-gpio9 for pm6350 @@ -134,12 +414,14 @@ $defs: - gpio1-gpio2 for pmi8950 - gpio1-gpio10 for pmi8994 - gpio1-gpio4 for pmk8350 + - gpio1-gpio10 for pmm8155au - gpio1-gpio4 for pmr735a - gpio1-gpio4 for pmr735b - gpio1-gpio12 for pms405 (holes on gpio1, gpio9 and gpio10) - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 and gpio11) + - gpio1-gpio16 for pmx65 items: pattern: "^gpio([0-9]+)$" @@ -174,6 +456,7 @@ $defs: bias-high-impedance: true input-enable: true + input-disable: true output-high: true output-low: true output-enable: true @@ -232,7 +515,7 @@ examples: #gpio-cells = <2>; pm8921_gpio_keys: gpio-keys-state { - volume-keys { + volume-keys-pins { pins = "gpio20", "gpio21"; function = "normal"; diff --git a/dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml index 206f4f2387..3f4f1c0360 100644 --- a/dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml @@ -42,8 +42,7 @@ properties: gpio-ranges: maxItems: 1 - wakeup-parent: - maxItems: 1 + wakeup-parent: true #PIN CONFIGURATION NODES patternProperties: diff --git a/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000000..d32ee32776 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) + Low Power Island (LPI) TLMM block + +maintainers: + - Srinivasa Rao Mandadapu + - Srinivas Kandagatla + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + LPASS LPI IP on most Qualcomm SoCs + +properties: + compatible: + const: qcom,sc7280-lpass-lpi-pinctrl + + reg: + minItems: 2 + maxItems: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9])$" + minItems: 1 + maxItems: 15 + + function: + enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, + qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, + dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, + i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, + dmic3_data, i2s2_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc7280-lpass-lpi-pinctrl"; + reg = <0x33c0000 0x20000>, + <0x3550000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + }; diff --git a/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml index 6c7c3f6a14..2d22816435 100644 --- a/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml @@ -42,8 +42,7 @@ properties: gpio-ranges: maxItems: 1 - wakeup-parent: - maxItems: 1 + wakeup-parent: true #PIN CONFIGURATION NODES patternProperties: diff --git a/dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml index cfcde405d3..a7a2bb8bff 100644 --- a/dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml @@ -49,8 +49,7 @@ properties: gpio-ranges: maxItems: 1 - wakeup-parent: - maxItems: 1 + wakeup-parent: true #PIN CONFIGURATION NODES patternProperties: diff --git a/dts/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000000..06efb13828 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) + Low Power Island (LPI) TLMM block + +maintainers: + - Srinivas Kandagatla + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + LPASS LPI IP on most Qualcomm SoCs + +properties: + compatible: + const: qcom,sm8250-lpass-lpi-pinctrl + + reg: + minItems: 2 + maxItems: 2 + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9])$" + minItems: 1 + maxItems: 14 + + function: + enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, + qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, + dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, + i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, + dmic3_data, i2s2_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include + lpi_tlmm: pinctrl@33c0000 { + compatible = "qcom,sm8250-lpass-lpi-pinctrl"; + reg = <0x33c0000 0x20000>, + <0x3550000 0x10000>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpi_tlmm 0 0 14>; + }; diff --git a/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml index cfa2c50fdb..15bb1018cf 100644 --- a/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml @@ -49,8 +49,7 @@ properties: gpio-ranges: maxItems: 1 - wakeup-parent: - maxItems: 1 + wakeup-parent: true #PIN CONFIGURATION NODES patternProperties: diff --git a/dts/Bindings/pinctrl/qcom,tlmm-common.yaml b/dts/Bindings/pinctrl/qcom,tlmm-common.yaml index 780f15bb5e..c88c8dcb69 100644 --- a/dts/Bindings/pinctrl/qcom,tlmm-common.yaml +++ b/dts/Bindings/pinctrl/qcom,tlmm-common.yaml @@ -42,7 +42,6 @@ properties: description: Specifying the interrupt-controller used to wake up the system when the TLMM block has been powered down. - maxItems: 1 gpio-reserved-ranges: description: diff --git a/dts/Bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/dts/Bindings/pinctrl/ralink,mt7620-pinctrl.yaml new file mode 100644 index 0000000000..4d820df24b --- /dev/null +++ b/dts/Bindings/pinctrl/ralink,mt7620-pinctrl.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink MT7620 Pin Controller + +maintainers: + - Arınç ÜNAL + - Sergio Paracuellos + +description: + Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,mt7620-pinctrl + +patternProperties: + '-pins$': + type: object + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + + properties: + groups: + description: The pin group to select. + enum: [ + # For MT7620 SoC + ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, + uartf, uartlite, wdt, wled, + + # For MT7628 and MT7688 SoCs + gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, + p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0, + pwm1, refclk, sdmode, spi, spi cs1, spis, uart0, uart1, uart2, + wdt, wled_an, wled_kn, + ] + + function: + description: The mux function to select. + enum: [ + # For MT7620 SoC + ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, + pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, refclk, + rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite, wdt refclk, + wdt rst, wled, + + # For MT7628 and MT7688 SoCs + antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, + p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, + p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2, + refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, + spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -, + ] + + required: + - groups + - function + + additionalProperties: false + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + +additionalProperties: false + +examples: + # Pinmux controller node + - | + pinctrl { + compatible = "ralink,mt7620-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/ralink,mt7621-pinctrl.yaml b/dts/Bindings/pinctrl/ralink,mt7621-pinctrl.yaml new file mode 100644 index 0000000000..61e5c847e8 --- /dev/null +++ b/dts/Bindings/pinctrl/ralink,mt7621-pinctrl.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,mt7621-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink MT7621 Pin Controller + +maintainers: + - Arınç ÜNAL + - Sergio Paracuellos + +description: + Ralink MT7621 pin controller for MT7621 SoC. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,mt7621-pinctrl + +patternProperties: + '-pins$': + type: object + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + + properties: + groups: + description: The pin group to select. + enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi, uart1, + uart2, uart3, wdt] + + function: + description: The mux function to select. + enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk, + pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3, spi, + uart1, uart2, uart3, wdt refclk, wdt rst] + + required: + - groups + - function + + additionalProperties: false + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + +additionalProperties: false + +examples: + # Pinmux controller node + - | + pinctrl { + compatible = "ralink,mt7621-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/ralink,rt2880-pinctrl.yaml b/dts/Bindings/pinctrl/ralink,rt2880-pinctrl.yaml new file mode 100644 index 0000000000..56e5becabc --- /dev/null +++ b/dts/Bindings/pinctrl/ralink,rt2880-pinctrl.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink RT2880 Pin Controller + +maintainers: + - Arınç ÜNAL + - Sergio Paracuellos + +description: + Ralink RT2880 pin controller for RT2880 SoC. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,rt2880-pinctrl + +patternProperties: + '-pins$': + type: object + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + + properties: + groups: + description: The pin group to select. + enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci] + + function: + description: The mux function to select. + enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci] + + required: + - groups + - function + + additionalProperties: false + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + +additionalProperties: false + +examples: + # Pinmux controller node + - | + pinctrl { + compatible = "ralink,rt2880-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/ralink,rt2880-pinmux.yaml b/dts/Bindings/pinctrl/ralink,rt2880-pinmux.yaml deleted file mode 100644 index 9de8b0c075..0000000000 --- a/dts/Bindings/pinctrl/ralink,rt2880-pinmux.yaml +++ /dev/null @@ -1,68 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Ralink rt2880 pinmux controller - -maintainers: - - Sergio Paracuellos - -description: - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins - is not supported. There is no pinconf support. - -properties: - compatible: - const: ralink,rt2880-pinmux - -patternProperties: - '-pins$': - type: object - patternProperties: - '^(.*-)?pinmux$': - type: object - description: node for pinctrl. - $ref: pinmux-node.yaml# - - properties: - groups: - description: Name of the pin group to use for the functions. - enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi, - uart1, uart2, uart3, wdt] - function: - description: The mux function to select - enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk, - pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3, - spi, uart1, uart2, uart3, wdt refclk, wdt rst] - - required: - - groups - - function - - additionalProperties: false - - additionalProperties: false - -allOf: - - $ref: "pinctrl.yaml#" - -required: - - compatible - -additionalProperties: false - -examples: - # Pinmux controller node - - | - pinctrl { - compatible = "ralink,rt2880-pinmux"; - - i2c_pins: i2c0-pins { - pinmux { - groups = "i2c"; - function = "i2c"; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/dts/Bindings/pinctrl/ralink,rt305x-pinctrl.yaml new file mode 100644 index 0000000000..425401c542 --- /dev/null +++ b/dts/Bindings/pinctrl/ralink,rt305x-pinctrl.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,rt305x-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink RT305X Pin Controller + +maintainers: + - Arınç ÜNAL + - Sergio Paracuellos + +description: + Ralink RT305X pin controller for RT3050, RT3052, RT3350, RT3352 and RT5350 + SoCs. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,rt305x-pinctrl + +patternProperties: + '-pins$': + type: object + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + + properties: + groups: + description: The pin group to select. + enum: [ + # For RT3050, RT3052 and RT3350 SoCs + i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite, + + # For RT3352 SoC + i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, uartf, + uartlite, + + # For RT5350 SoC + i2c, jtag, led, spi, spi_cs1, uartf, uartlite, + ] + + function: + description: The mux function to select. + enum: [ + # For RT3050, RT3052 and RT3350 SoCs + gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, pcm gpio, + pcm i2s, pcm uartf, rgmii, sdram, spi, uartf, uartlite, + + # For RT3352 SoC + gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, mdio, + pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf, + uartlite, wdg_cs1, + + # For RT5350 SoC + gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, pcm gpio, + pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite, wdg_cs1, + ] + + required: + - groups + - function + + additionalProperties: false + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + +additionalProperties: false + +examples: + # Pinmux controller node + - | + pinctrl { + compatible = "ralink,rt305x-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/dts/Bindings/pinctrl/ralink,rt3883-pinctrl.yaml new file mode 100644 index 0000000000..feb6e66dcb --- /dev/null +++ b/dts/Bindings/pinctrl/ralink,rt3883-pinctrl.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,rt3883-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink RT3883 Pin Controller + +maintainers: + - Arınç ÜNAL + - Sergio Paracuellos + +description: + Ralink RT3883 pin controller for RT3883 SoC. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,rt3883-pinctrl + +patternProperties: + '-pins$': + type: object + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + + properties: + groups: + description: The pin group to select. + enum: [ge1, ge2, i2c, jtag, lna a, lna g, mdio, pci, spi, uartf, + uartlite] + + function: + description: The mux function to select. + enum: [ge1, ge2, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, + lna a, lna g, mdio, pci-dev, pci-fnc, pci-host1, pci-host2, + pcm gpio, pcm i2s, pcm uartf, spi, uartf, uartlite] + + required: + - groups + - function + + additionalProperties: false + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + +additionalProperties: false + +examples: + # Pinmux controller node + - | + pinctrl { + compatible = "ralink,rt3883-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 9ccf54870a..52df1b1461 100644 --- a/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -11,8 +11,8 @@ maintainers: - Lad Prabhakar description: - The Renesas SoCs of the RZ/{G2L,V2L} series feature a combined Pin and GPIO - controller. + The Renesas SoCs of the RZ/{G2L,V2L} alike series feature a combined Pin and + GPIO controller. Pin multiplexing and GPIO configuration is performed on a per-pin basis. Each port features up to 8 pins, each of them configurable for GPIO function (port mode) or in alternate function mode. @@ -23,6 +23,7 @@ properties: oneOf: - items: - enum: + - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} - items: diff --git a/dts/Bindings/pinctrl/rockchip,pinctrl.yaml b/dts/Bindings/pinctrl/rockchip,pinctrl.yaml index b0eae3a67a..677a285ca4 100644 --- a/dts/Bindings/pinctrl/rockchip,pinctrl.yaml +++ b/dts/Bindings/pinctrl/rockchip,pinctrl.yaml @@ -33,6 +33,7 @@ properties: enum: - rockchip,px30-pinctrl - rockchip,rk2928-pinctrl + - rockchip,rk3036-pinctrl - rockchip,rk3066a-pinctrl - rockchip,rk3066b-pinctrl - rockchip,rk3128-pinctrl @@ -44,6 +45,7 @@ properties: - rockchip,rk3368-pinctrl - rockchip,rk3399-pinctrl - rockchip,rk3568-pinctrl + - rockchip,rk3588-pinctrl - rockchip,rv1108-pinctrl rockchip,grf: @@ -129,7 +131,7 @@ additionalProperties: description: Pin bank index. - minimum: 0 - maximum: 6 + maximum: 10 description: Mux 0 means GPIO and mux 1 to N means the specific device function. diff --git a/dts/Bindings/power/amlogic,meson-sec-pwrc.yaml b/dts/Bindings/power/amlogic,meson-sec-pwrc.yaml index 7657721a4e..86e5f6513b 100644 --- a/dts/Bindings/power/amlogic,meson-sec-pwrc.yaml +++ b/dts/Bindings/power/amlogic,meson-sec-pwrc.yaml @@ -40,4 +40,3 @@ examples: #power-domain-cells = <1>; }; }; - diff --git a/dts/Bindings/power/avs/qcom,cpr.yaml b/dts/Bindings/power/avs/qcom,cpr.yaml index 3301fa0c26..301db7daf8 100644 --- a/dts/Bindings/power/avs/qcom,cpr.yaml +++ b/dts/Bindings/power/avs/qcom,cpr.yaml @@ -51,6 +51,7 @@ properties: supported by the CPR power domain. acc-syscon: + $ref: /schemas/types.yaml#/definitions/phandle description: A phandle to the syscon used for writing ACC settings. nvmem-cells: diff --git a/dts/Bindings/power/qcom,rpmpd.yaml b/dts/Bindings/power/qcom,rpmpd.yaml index 940e97b565..ad77a6380f 100644 --- a/dts/Bindings/power/qcom,rpmpd.yaml +++ b/dts/Bindings/power/qcom,rpmpd.yaml @@ -27,12 +27,15 @@ properties: - qcom,msm8998-rpmpd - qcom,qcm2290-rpmpd - qcom,qcs404-rpmpd + - qcom,sa8540p-rpmhpd - qcom,sdm660-rpmpd - qcom,sc7180-rpmhpd - qcom,sc7280-rpmhpd - qcom,sc8180x-rpmhpd + - qcom,sc8280xp-rpmhpd - qcom,sdm845-rpmhpd - qcom,sdx55-rpmhpd + - qcom,sdx65-rpmhpd - qcom,sm6115-rpmpd - qcom,sm6125-rpmpd - qcom,sm6350-rpmhpd diff --git a/dts/Bindings/power/renesas,rcar-sysc.yaml b/dts/Bindings/power/renesas,rcar-sysc.yaml index 62a49ca319..8d56bedd33 100644 --- a/dts/Bindings/power/renesas,rcar-sysc.yaml +++ b/dts/Bindings/power/renesas,rcar-sysc.yaml @@ -10,9 +10,11 @@ maintainers: - Geert Uytterhoeven - Magnus Damm -description: +description: | The R-Car (RZ/G) System Controller provides power management for the CPU cores and various coprocessors. + The power domain IDs for consumers are defined in header files:: + include/dt-bindings/power/r8*-sysc.h properties: compatible: @@ -42,6 +44,7 @@ properties: - renesas,r8a77995-sysc # R-Car D3 - renesas,r8a779a0-sysc # R-Car V3U - renesas,r8a779f0-sysc # R-Car S4-8 + - renesas,r8a779g0-sysc # R-Car V4H reg: maxItems: 1 @@ -64,14 +67,3 @@ examples: reg = <0xe6180000 0x0200>; #power-domain-cells = <1>; }; - - - | - // Power Domain consumers - #include - - cache-controller-0 { - compatible = "cache"; - power-domains = <&sysc R8A7791_PD_CA15_SCU>; - cache-unified; - cache-level = <2>; - }; diff --git a/dts/Bindings/power/renesas,rzg2l-sysc.yaml b/dts/Bindings/power/renesas,rzg2l-sysc.yaml deleted file mode 100644 index bb433e75a0..0000000000 --- a/dts/Bindings/power/renesas,rzg2l-sysc.yaml +++ /dev/null @@ -1,64 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: "http://devicetree.org/schemas/power/renesas,rzg2l-sysc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" - -title: Renesas RZ/{G2L,V2L} System Controller (SYSC) - -maintainers: - - Geert Uytterhoeven - -description: - The RZ/{G2L,V2L} System Controller (SYSC) performs system control of the LSI - and supports following functions, - - External terminal state capture function - - 34-bit address space access function - - Low power consumption control - - WDT stop control - -properties: - compatible: - enum: - - renesas,r9a07g044-sysc # RZ/G2{L,LC} - - renesas,r9a07g054-sysc # RZ/V2L - - reg: - maxItems: 1 - - interrupts: - items: - - description: CA55/CM33 Sleep/Software Standby Mode request interrupt - - description: CA55 Software Standby Mode release request interrupt - - description: CM33 Software Standby Mode release request interrupt - - description: CA55 ACE Asynchronous Bridge Master/Slave interface deny request interrupt - - interrupt-names: - items: - - const: lpm_int - - const: ca55stbydone_int - - const: cm33stbyr_int - - const: ca55_deny - -required: - - compatible - - reg - - interrupts - - interrupt-names - -additionalProperties: false - -examples: - - | - #include - - sysc: system-controller@11020000 { - compatible = "renesas,r9a07g044-sysc"; - reg = <0x11020000 0x10000>; - interrupts = , - , - , - ; - interrupt-names = "lpm_int", "ca55stbydone_int", "cm33stbyr_int", - "ca55_deny"; - }; diff --git a/dts/Bindings/power/supply/battery.yaml b/dts/Bindings/power/supply/battery.yaml index d56ac484fe..491488e7b9 100644 --- a/dts/Bindings/power/supply/battery.yaml +++ b/dts/Bindings/power/supply/battery.yaml @@ -85,8 +85,13 @@ properties: description: battery factory internal resistance resistance-temp-table: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: the temperature in degree Celsius + - description: battery internal resistance percent description: | - An array providing the temperature in degree Celsius + A table providing the temperature in degree Celsius and corresponding battery internal resistance percent, which is used to look up the resistance percent according to current temperature to get an accurate batterty internal resistance in different temperatures. diff --git a/dts/Bindings/power/supply/charger-manager.yaml b/dts/Bindings/power/supply/charger-manager.yaml index c863cfa678..fbb2204769 100644 --- a/dts/Bindings/power/supply/charger-manager.yaml +++ b/dts/Bindings/power/supply/charger-manager.yaml @@ -36,6 +36,7 @@ properties: cm-poll-mode: description: polling mode + $ref: /schemas/types.yaml#/definitions/uint32 default: 0 enum: - 0 # disabled diff --git a/dts/Bindings/power/supply/cw2015_battery.yaml b/dts/Bindings/power/supply/cw2015_battery.yaml index 2dda91587d..dc697b6147 100644 --- a/dts/Bindings/power/supply/cw2015_battery.yaml +++ b/dts/Bindings/power/supply/cw2015_battery.yaml @@ -78,4 +78,3 @@ examples: power-supplies = <&mains_charger>, <&usb_charger>; }; }; - diff --git a/dts/Bindings/power/supply/power-supply.yaml b/dts/Bindings/power/supply/power-supply.yaml index 531b67225c..9a490fbd32 100644 --- a/dts/Bindings/power/supply/power-supply.yaml +++ b/dts/Bindings/power/supply/power-supply.yaml @@ -19,4 +19,3 @@ properties: supply it power, referenced by their phandles. additionalProperties: true - diff --git a/dts/Bindings/power/supply/ti,lp8727.yaml b/dts/Bindings/power/supply/ti,lp8727.yaml index a23f6653f3..93654e732c 100644 --- a/dts/Bindings/power/supply/ti,lp8727.yaml +++ b/dts/Bindings/power/supply/ti,lp8727.yaml @@ -87,4 +87,3 @@ examples: }; }; }; - diff --git a/dts/Bindings/power/supply/tps65217-charger.yaml b/dts/Bindings/power/supply/tps65217-charger.yaml index a33408c3a4..2c2fe883bb 100644 --- a/dts/Bindings/power/supply/tps65217-charger.yaml +++ b/dts/Bindings/power/supply/tps65217-charger.yaml @@ -24,7 +24,7 @@ properties: items: - const: USB - const: AC - + required: - compatible - interrupts diff --git a/dts/Bindings/powerpc/fsl/cache_sram.txt b/dts/Bindings/powerpc/fsl/cache_sram.txt deleted file mode 100644 index 781955f521..0000000000 --- a/dts/Bindings/powerpc/fsl/cache_sram.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Freescale PQ3 and QorIQ based Cache SRAM - -Freescale's mpc85xx and some QorIQ platforms provide an -option of configuring a part of (or full) cache memory -as SRAM. This cache SRAM representation in the device -tree should be done as under:- - -Required properties: - -- compatible : should be "fsl,p2020-cache-sram" -- fsl,cache-sram-ctlr-handle : points to the L2 controller -- reg : offset and length of the cache-sram. - -Example: - -cache-sram@fff00000 { - fsl,cache-sram-ctlr-handle = <&L2>; - reg = <0 0xfff00000 0 0x10000>; - compatible = "fsl,p2020-cache-sram"; -}; diff --git a/dts/Bindings/powerpc/fsl/l2cache.txt b/dts/Bindings/powerpc/fsl/l2cache.txt index 8a70696395..22ad012660 100644 --- a/dts/Bindings/powerpc/fsl/l2cache.txt +++ b/dts/Bindings/powerpc/fsl/l2cache.txt @@ -6,12 +6,6 @@ The cache bindings explained below are Devicetree Specification compliant Required Properties: - compatible : Should include one of the following: - "fsl,8540-l2-cache-controller" - "fsl,8541-l2-cache-controller" - "fsl,8544-l2-cache-controller" - "fsl,8548-l2-cache-controller" - "fsl,8555-l2-cache-controller" - "fsl,8568-l2-cache-controller" "fsl,b4420-l2-cache-controller" "fsl,b4860-l2-cache-controller" "fsl,bsc9131-l2-cache-controller" diff --git a/dts/Bindings/pwm/atmel,at91sam-pwm.yaml b/dts/Bindings/pwm/atmel,at91sam-pwm.yaml new file mode 100644 index 0000000000..ab45df8034 --- /dev/null +++ b/dts/Bindings/pwm/atmel,at91sam-pwm.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/atmel,at91sam-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel/Microchip PWM controller + +maintainers: + - Claudiu Beznea + +allOf: + - $ref: "pwm.yaml#" + +properties: + compatible: + oneOf: + - items: + - enum: + - atmel,at91sam9rl-pwm + - atmel,sama5d3-pwm + - atmel,sama5d2-pwm + - microchip,sam9x60-pwm + - items: + - const: microchip,sama7g5-pwm + - const: atmel,sama5d2-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + pwm0: pwm@f8034000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xf8034000 0x400>; + #pwm-cells = <3>; + }; diff --git a/dts/Bindings/pwm/atmel-pwm.txt b/dts/Bindings/pwm/atmel-pwm.txt deleted file mode 100644 index fbb5325be1..0000000000 --- a/dts/Bindings/pwm/atmel-pwm.txt +++ /dev/null @@ -1,35 +0,0 @@ -Atmel PWM controller - -Required properties: - - compatible: should be one of: - - "atmel,at91sam9rl-pwm" - - "atmel,sama5d3-pwm" - - "atmel,sama5d2-pwm" - - "microchip,sam9x60-pwm" - - reg: physical base address and length of the controller's registers - - #pwm-cells: Should be 3. See pwm.yaml in this directory for a - description of the cells format. - -Example: - - pwm0: pwm@f8034000 { - compatible = "atmel,at91sam9rl-pwm"; - reg = <0xf8034000 0x400>; - #pwm-cells = <3>; - }; - - pwmleds { - compatible = "pwm-leds"; - - d1 { - label = "d1"; - pwms = <&pwm0 3 5000 0> - max-brightness = <255>; - }; - - d2 { - label = "d2"; - pwms = <&pwm0 1 5000 1> - max-brightness = <255>; - }; - }; diff --git a/dts/Bindings/pwm/google,cros-ec-pwm.yaml b/dts/Bindings/pwm/google,cros-ec-pwm.yaml index 7ab6912a84..c8577bdf6c 100644 --- a/dts/Bindings/pwm/google,cros-ec-pwm.yaml +++ b/dts/Bindings/pwm/google,cros-ec-pwm.yaml @@ -21,7 +21,14 @@ allOf: properties: compatible: - const: google,cros-ec-pwm + oneOf: + - description: PWM controlled using EC_PWM_TYPE_GENERIC channels. + items: + - const: google,cros-ec-pwm + - description: PWM controlled using CROS_EC_PWM_DT_<...> types. + items: + - const: google,cros-ec-pwm-type + "#pwm-cells": description: The cell specifies the PWM index. const: 1 diff --git a/dts/Bindings/pwm/mediatek,pwm-disp.yaml b/dts/Bindings/pwm/mediatek,pwm-disp.yaml new file mode 100644 index 0000000000..e4fe2d1bfe --- /dev/null +++ b/dts/Bindings/pwm/mediatek,pwm-disp.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek DISP_PWM Controller Device Tree Bindings + +maintainers: + - Jitao Shi + - Xinlei Lee + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2701-disp-pwm + - mediatek,mt6595-disp-pwm + - mediatek,mt8173-disp-pwm + - mediatek,mt8183-disp-pwm + - items: + - const: mediatek,mt8167-disp-pwm + - const: mediatek,mt8173-disp-pwm + - items: + - enum: + - mediatek,mt8186-disp-pwm + - mediatek,mt8192-disp-pwm + - mediatek,mt8195-disp-pwm + - const: mediatek,mt8183-disp-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 2 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Main Clock + - description: Mm Clock + + clock-names: + items: + - const: main + - const: mm + +required: + - compatible + - reg + - "#pwm-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + pwm0: pwm@1401e000 { + compatible = "mediatek,mt8173-disp-pwm"; + reg = <0x1401e000 0x1000>; + #pwm-cells = <2>; + clocks = <&mmsys CLK_MM_DISP_PWM026M>, + <&mmsys CLK_MM_DISP_PWM0MM>; + clock-names = "main", "mm"; + }; diff --git a/dts/Bindings/pwm/pwm-mediatek.txt b/dts/Bindings/pwm/pwm-mediatek.txt index 25ed214473..033d1fc0f4 100644 --- a/dts/Bindings/pwm/pwm-mediatek.txt +++ b/dts/Bindings/pwm/pwm-mediatek.txt @@ -3,6 +3,7 @@ MediaTek PWM controller Required properties: - compatible: should be "mediatek,-pwm": - "mediatek,mt2712-pwm": found on mt2712 SoC. + - "mediatek,mt6795-pwm": found on mt6795 SoC. - "mediatek,mt7622-pwm": found on mt7622 SoC. - "mediatek,mt7623-pwm": found on mt7623 SoC. - "mediatek,mt7628-pwm": found on mt7628 SoC. diff --git a/dts/Bindings/pwm/pwm-mtk-disp.txt b/dts/Bindings/pwm/pwm-mtk-disp.txt deleted file mode 100644 index 691e58b6c2..0000000000 --- a/dts/Bindings/pwm/pwm-mtk-disp.txt +++ /dev/null @@ -1,45 +0,0 @@ -MediaTek display PWM controller - -Required properties: - - compatible: should be "mediatek,-disp-pwm": - - "mediatek,mt2701-disp-pwm": found on mt2701 SoC. - - "mediatek,mt6595-disp-pwm": found on mt6595 SoC. - - "mediatek,mt8167-disp-pwm", "mediatek,mt8173-disp-pwm": found on mt8167 SoC. - - "mediatek,mt8173-disp-pwm": found on mt8173 SoC. - - "mediatek,mt8183-disp-pwm": found on mt8183 SoC.$ - - reg: physical base address and length of the controller's registers. - - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of - the cell format. - - clocks: phandle and clock specifier of the PWM reference clock. - - clock-names: must contain the following: - - "main": clock used to generate PWM signals. - - "mm": sync signals from the modules of mmsys. - - pinctrl-names: Must contain a "default" entry. - - pinctrl-0: One property must exist for each entry in pinctrl-names. - See pinctrl/pinctrl-bindings.txt for details of the property values. - -Example: - pwm0: pwm@1401e000 { - compatible = "mediatek,mt8173-disp-pwm", - "mediatek,mt6595-disp-pwm"; - reg = <0 0x1401e000 0 0x1000>; - #pwm-cells = <2>; - clocks = <&mmsys CLK_MM_DISP_PWM026M>, - <&mmsys CLK_MM_DISP_PWM0MM>; - clock-names = "main", "mm"; - pinctrl-names = "default"; - pinctrl-0 = <&disp_pwm0_pins>; - }; - - backlight_lcd: backlight_lcd { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 1000000>; - brightness-levels = < - 0 16 32 48 64 80 96 112 - 128 144 160 176 192 208 224 240 - 255 - >; - default-brightness-level = <9>; - power-supply = <&mt6397_vio18_reg>; - enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; - }; diff --git a/dts/Bindings/pwm/pwm-omap-dmtimer.txt b/dts/Bindings/pwm/pwm-omap-dmtimer.txt index d722ae3be3..25ecfe14c6 100644 --- a/dts/Bindings/pwm/pwm-omap-dmtimer.txt +++ b/dts/Bindings/pwm/pwm-omap-dmtimer.txt @@ -2,7 +2,7 @@ Required properties: - compatible: Shall contain "ti,omap-dmtimer-pwm". -- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer.txt for info +- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer-dm.yaml for info about these timers. - #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format. diff --git a/dts/Bindings/pwm/sunplus,sp7021-pwm.yaml b/dts/Bindings/pwm/sunplus,sp7021-pwm.yaml new file mode 100644 index 0000000000..d4fc9e8db1 --- /dev/null +++ b/dts/Bindings/pwm/sunplus,sp7021-pwm.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/sunplus,sp7021-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SoC SP7021 PWM Controller + +maintainers: + - Hammer Hsieh + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: sunplus,sp7021-pwm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#pwm-cells': + const: 2 + +unevaluatedProperties: false + +required: + - reg + - clocks + +examples: + - | + pwm: pwm@9c007a00 { + compatible = "sunplus,sp7021-pwm"; + reg = <0x9c007a00 0x80>; + clocks = <&clkc 0xa2>; + #pwm-cells = <2>; + }; diff --git a/dts/Bindings/regulator/mt6315-regulator.yaml b/dts/Bindings/regulator/mt6315-regulator.yaml index 61dd5af80d..37402c370f 100644 --- a/dts/Bindings/regulator/mt6315-regulator.yaml +++ b/dts/Bindings/regulator/mt6315-regulator.yaml @@ -31,7 +31,7 @@ properties: $ref: "regulator.yaml#" properties: - regulator-name: + regulator-compatible: pattern: "^vbuck[1-4]$" additionalProperties: false @@ -55,7 +55,7 @@ examples: regulator-min-microvolt = <300000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; - regulator-allowed-modes = <0 1 2 4>; + regulator-allowed-modes = <0 1 2>; }; vbuck3 { @@ -63,7 +63,7 @@ examples: regulator-min-microvolt = <300000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; - regulator-allowed-modes = <0 1 2 4>; + regulator-allowed-modes = <0 1 2>; }; }; }; diff --git a/dts/Bindings/regulator/mt6358-regulator.txt b/dts/Bindings/regulator/mt6358-regulator.txt index 9a90a92f2d..7034cdca54 100644 --- a/dts/Bindings/regulator/mt6358-regulator.txt +++ b/dts/Bindings/regulator/mt6358-regulator.txt @@ -8,14 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt. The valid names for regulators are:: BUCK: - buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu, - buck_vs2, buck_vmodem, buck_vs1 + buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11, + buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1 LDO: ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio, ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others, - ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28, - ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18, - ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, + ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, + ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, + ldo_vrf18, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2 Example: @@ -354,5 +354,17 @@ Example: regulator-max-microvolt = <3100000>; regulator-enable-ramp-delay = <540>; }; + + mt6358_vcore_sshub_reg: buck_vcore_sshub { + regulator-name = "vcore_sshub"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + }; + + mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub { + regulator-name = "vsram_others_sshub"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + }; }; }; diff --git a/dts/Bindings/regulator/nxp,pca9450-regulator.yaml b/dts/Bindings/regulator/nxp,pca9450-regulator.yaml index f70f2e758a..b539781e39 100644 --- a/dts/Bindings/regulator/nxp,pca9450-regulator.yaml +++ b/dts/Bindings/regulator/nxp,pca9450-regulator.yaml @@ -92,6 +92,17 @@ properties: LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is connected to a host GPIO. + nxp,i2c-lt-enable: + type: boolean + description: + Indicates that the I2C Level Translator is used. + + nxp,wdog_b-warm-reset: + type: boolean + description: + When WDOG_B signal is asserted a warm reset will be done instead of cold + reset. + required: - compatible - reg diff --git a/dts/Bindings/regulator/qcom,rpmh-regulator.yaml b/dts/Bindings/regulator/qcom,rpmh-regulator.yaml index e28ee9e467..9a36bee750 100644 --- a/dts/Bindings/regulator/qcom,rpmh-regulator.yaml +++ b/dts/Bindings/regulator/qcom,rpmh-regulator.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. RPMh Regulators maintainers: - - David Collins + - Bjorn Andersson + - Krzysztof Kozlowski description: | rpmh-regulator devices support PMIC regulator management via the Voltage @@ -78,7 +79,7 @@ properties: RPMh resource name suffix used for the regulators found on this PMIC. $ref: /schemas/types.yaml#/definitions/string - enum: [a, b, c, d, e, f] + enum: [a, b, c, d, e, f, h, k] qcom,always-wait-for-ack: description: | @@ -94,35 +95,264 @@ properties: vdd-rgb-supply: description: Input supply phandle of rgb. - vin-lvs-1-2-supply: - description: Input supply phandle of one or more regulators. - - vdd-bob-supply: - description: BOB regulator parent supply phandle. - bob: type: object $ref: "regulator.yaml#" description: BOB regulator node. patternProperties: - "^vdd-s([0-9]+)-supply$": - description: Input supply phandle(s) of one or more regulators. - - "^vdd-(l[0-9]+[-]){1,5}supply$": - description: Input supply phandle(s) of one or more regulators. - "^(smps|ldo|lvs)[0-9]+$": type: object $ref: "regulator.yaml#" description: smps/ldo regulator nodes(s). -additionalProperties: false - required: - compatible - qcom,pmic-id +allOf: + - if: + properties: + compatible: + enum: + - qcom,pm6150-rpmh-regulators + then: + properties: + vdd-l2-l3-supply: true + vdd-l4-l7-l8-supply: true + vdd-l5-l16-l17-l18-l19-supply: true + vdd-l10-l14-l15-supply: true + vdd-l11-l12-l13-supply: true + patternProperties: + "^vdd-l[169]-supply$": true + "^vdd-s[1-5]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm6150l-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + vdd-l1-l8-supply: true + vdd-l2-l3-supply: true + vdd-l4-l5-l6-supply: true + vdd-l7-l11-supply: true + vdd-l9-l10-supply: true + patternProperties: + "^vdd-s[1-8]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm7325-rpmh-regulators + then: + properties: + vdd-l1-l4-l12-l15-supply: true + vdd-l2-l7-supply: true + vdd-l6-l9-l10-supply: true + vdd-l11-l17-l18-l19-supply: true + vdd-l13-supply: true + vdd-l14-l16-supply: true + patternProperties: + "^vdd-l[358]-supply$": true + "^vdd-s[1-8]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8005-rpmh-regulators + then: + patternProperties: + "^vdd-s[1-4]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8009-rpmh-regulators + - qcom,pm8009-1-rpmh-regulators + then: + properties: + vdd-l5-l6-supply: true + patternProperties: + "^vdd-l[1-47]-supply$": true + "^vdd-s[1-2]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8150-rpmh-regulators + - qcom,pmm8155au-rpmh-regulators + then: + properties: + vdd-l1-l8-l11-supply: true + vdd-l2-l10-supply: true + vdd-l3-l4-l5-l18-supply: true + vdd-l6-l9-supply: true + vdd-l7-l12-l14-l15-supply: true + vdd-l13-l16-l17-supply: true + patternProperties: + "^vdd-s([1-9]|10)-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8150l-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + vdd-l1-l8-supply: true + vdd-l2-l3-supply: true + vdd-l4-l5-l6-supply: true + vdd-l7-l11-supply: true + vdd-l9-l10-supply: true + patternProperties: + "^vdd-s[1-8]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8350-rpmh-regulators + then: + properties: + vdd-l1-l4-supply: true + vdd-l2-l7-supply: true + vdd-l3-l5-supply: true + vdd-l6-l9-l10-supply: true + vdd-l8-supply: true + patternProperties: + "^vdd-s([1-9]|1[0-2])-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8350c-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + vdd-l1-l12-supply: true + vdd-l2-l8-supply: true + vdd-l3-l4-l5-l7-l13-supply: true + vdd-l6-l9-l11-supply: true + vdd-l10-supply: true + patternProperties: + "^vdd-s([1-9]|10)-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8450-rpmh-regulators + then: + patternProperties: + "^vdd-l[1-4]-supply$": true + "^vdd-s[1-6]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8998-rpmh-regulators + then: + properties: + vdd-l1-l27-supply: true + vdd-l2-l8-l17-supply: true + vdd-l3-l11-supply: true + vdd-l4-l5-supply: true + vdd-l6-supply: true + vdd-l7-l12-l14-l15-supply: true + vdd-l9-supply: true + vdd-l10-l23-l25-supply: true + vdd-l13-l19-l21-supply: true + vdd-l16-l28-supply: true + vdd-l18-l22-supply: true + vdd-l20-l24-supply: true + vdd-l26-supply: true + vin-lvs-1-2-supply: true + patternProperties: + "^vdd-s([1-9]|1[0-3])-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pmg1110-rpmh-regulators + then: + properties: + vdd-s1-supply: true + + - if: + properties: + compatible: + enum: + - qcom,pmi8998-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + + - if: + properties: + compatible: + enum: + - qcom,pmr735a-rpmh-regulators + then: + properties: + vdd-l1-l2-supply: true + vdd-l3-supply: true + vdd-l4-supply: true + vdd-l5-l6-supply: true + vdd-l7-bob-supply: true + patternProperties: + "^vdd-s[1-3]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pmx55-rpmh-regulators + then: + properties: + vdd-l1-l2-supply: true + vdd-l3-l9-supply: true + vdd-l4-l12-supply: true + vdd-l5-l6-supply: true + vdd-l7-l8-supply: true + vdd-l10-l11-l13-supply: true + patternProperties: + "^vdd-l1[4-6]-supply$": true + "^vdd-s[1-7]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pmx65-rpmh-regulators + then: + properties: + vdd-l2-l18-supply: true + vdd-l5-l6-l16-supply: true + vdd-l8-l9-supply: true + vdd-l11-l13-supply: true + patternProperties: + "^vdd-l[1347]-supply$": true + "^vdd-l1[0245789]-supply$": true + "^vdd-l2[01]-supply$": true + "^vdd-s[1-8]-supply$": true + +unevaluatedProperties: false + examples: - | #include diff --git a/dts/Bindings/regulator/qcom,smd-rpm-regulator.yaml b/dts/Bindings/regulator/qcom,smd-rpm-regulator.yaml index f052e03be4..6a9a7eed46 100644 --- a/dts/Bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/dts/Bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -12,7 +12,7 @@ description: resides as a subnode of the SMD. As such, the SMD-RPM regulator requires that the SMD and RPM nodes be present. - Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for + Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml for information pertaining to the SMD node. Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -69,7 +69,8 @@ description: l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22 maintainers: - - Kathiravan T + - Andy Gross + - Bjorn Andersson properties: compatible: diff --git a/dts/Bindings/regulator/richtek,rt4801-regulator.yaml b/dts/Bindings/regulator/richtek,rt4801-regulator.yaml index 235e593b3b..091150c4e5 100644 --- a/dts/Bindings/regulator/richtek,rt4801-regulator.yaml +++ b/dts/Bindings/regulator/richtek,rt4801-regulator.yaml @@ -17,9 +17,6 @@ description: | Datasheet is available at https://www.richtek.com/assets/product_file/RT4801H/DS4801H-00.pdf -#The valid names for RT4801 regulator nodes are: -#DSVP, DSVN - properties: compatible: enum: @@ -33,10 +30,13 @@ properties: The first one is ENP to enable DSVP, and second one is ENM to enable DSVN. Number of GPIO in the array list could be 1 or 2. If only one gpio is specified, only one gpio used to control ENP/ENM. - Else both are spefied, DSVP/DSVN could be controlled individually. - Othersie, this property not specified. treat both as always-on regulator. + Else if both are specified, DSVP/DSVN could be controlled individually. + If this property not specified, treat both as always-on regulators. + + Property is deprecated. Use enable-gpios in each regulator. minItems: 1 maxItems: 2 + deprecated: true patternProperties: "^DSV(P|N)$": @@ -45,6 +45,14 @@ patternProperties: description: Properties for single display bias regulator. + properties: + enable-gpios: + description: + GPIO to use to enable DSVP/DSVN regulator. One GPIO can be configured + for controlling both regulators. If this property not specified for + any regulator, treat both as always-on regulators. + maxItems: 1 + required: - compatible - reg @@ -60,19 +68,20 @@ examples: rt4801@73 { compatible = "richtek,rt4801"; reg = <0x73>; - enable-gpios = <&gpio26 2 0>, <&gpio26 3 0>; dsvp: DSVP { regulator-name = "rt4801,dsvp"; regulator-min-microvolt = <4000000>; regulator-max-microvolt = <6000000>; regulator-boot-on; + enable-gpios = <&gpio26 2 0>; }; dsvn: DSVN { regulator-name = "rt4801,dsvn"; regulator-min-microvolt = <4000000>; regulator-max-microvolt = <6000000>; regulator-boot-on; + enable-gpios = <&gpio26 3 0>; }; }; diff --git a/dts/Bindings/regulator/richtek,rt5759-regulator.yaml b/dts/Bindings/regulator/richtek,rt5759-regulator.yaml new file mode 100644 index 0000000000..0a4c9576a4 --- /dev/null +++ b/dts/Bindings/regulator/richtek,rt5759-regulator.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt5759-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5759 High Performance DCDC Converter + +maintainers: + - ChiYuan Huang + +description: | + The RT5759 is a high-performance, synchronous step-down DC-DC converter that + can deliver up to 9A output current from 3V to 6.5V input supply, The output + voltage can be programmable with I2C controlled 7-Bit VID. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT5759/DS5759-00.pdf + +properties: + compatible: + enum: + - richtek,rt5759 + - richtek,rt5759a + + reg: + maxItems: 1 + + regulator-allowed-modes: + description: | + buck allowed operating mode + 0: auto mode (PSKIP: pulse skipping) + 1: force pwm mode + items: + enum: [0, 1] + + richtek,watchdog-enable: + description: enable the external watchdog reset pin listening + type: boolean + +allOf: + - $ref: regulator.yaml# + + - if: + properties: + compatible: + contains: + const: richtek,rt5759 + then: + properties: + richtek,watchdog-enable: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + # example 1 for RT5759 + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@62 { + compatible = "richtek,rt5759"; + reg = <0x62>; + regulator-name = "rt5759-buck"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + }; + }; + # example 2 for RT5759A + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@62 { + compatible = "richtek,rt5759a"; + reg = <0x62>; + regulator-name = "rt5759a-buck"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1725000>; + regulator-boot-on; + richtek,watchdog-enable; + }; + }; diff --git a/dts/Bindings/regulator/siliconmitus,sm5703-regulator.yaml b/dts/Bindings/regulator/siliconmitus,sm5703-regulator.yaml new file mode 100644 index 0000000000..9d84117530 --- /dev/null +++ b/dts/Bindings/regulator/siliconmitus,sm5703-regulator.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/siliconmitus,sm5703-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Mitus SM5703 multi function device regulators + +maintainers: + - Markuss Broks + +description: | + SM5703 regulators node should be a sub node of the SM5703 MFD node. See SM5703 MFD + bindings at Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml + Regulator nodes should be named as USBLDO_, BUCK, VBUS, LDO_. + The definition for each of these nodes is defined using the standard + binding for regulators at Documentation/devicetree/bindings/regulator/regulator.txt. + +properties: + buck: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for the BUCK regulator. + + vbus: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for the VBUS regulator. + +patternProperties: + "^ldo[1-3]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + "^usbldo[1-2]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for a single USBLDO regulator. + +additionalProperties: false diff --git a/dts/Bindings/regulator/socionext,uniphier-regulator.yaml b/dts/Bindings/regulator/socionext,uniphier-regulator.yaml index 1218f21ba3..c0acf94975 100644 --- a/dts/Bindings/regulator/socionext,uniphier-regulator.yaml +++ b/dts/Bindings/regulator/socionext,uniphier-regulator.yaml @@ -14,9 +14,6 @@ description: | maintainers: - Kunihiko Hayashi -allOf: - - $ref: "regulator.yaml#" - # USB3 Controller properties: @@ -36,27 +33,51 @@ properties: minItems: 1 maxItems: 2 - clock-names: - oneOf: - - items: # for Pro4, Pro5 - - const: gio - - const: link - - items: # for others - - const: link + clock-names: true resets: minItems: 1 maxItems: 2 - reset-names: - oneOf: - - items: # for Pro4, Pro5 - - const: gio - - const: link - - items: - - const: link + reset-names: true -additionalProperties: false +allOf: + - $ref: "regulator.yaml#" + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pro4-usb3-regulator + - socionext,uniphier-pro5-usb3-regulator + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: link + else: + properties: + clocks: + maxItems: 1 + clock-names: + const: link + resets: + maxItems: 1 + reset-names: + const: link + +unevaluatedProperties: false required: - compatible @@ -83,4 +104,3 @@ examples: resets = <&sys_rst 14>; }; }; - diff --git a/dts/Bindings/regulator/st,stm32-vrefbuf.yaml b/dts/Bindings/regulator/st,stm32-vrefbuf.yaml index 836d4156d5..a5a27ee0a9 100644 --- a/dts/Bindings/regulator/st,stm32-vrefbuf.yaml +++ b/dts/Bindings/regulator/st,stm32-vrefbuf.yaml @@ -51,4 +51,3 @@ examples: }; ... - diff --git a/dts/Bindings/remoteproc/fsl,imx-rproc.yaml b/dts/Bindings/remoteproc/fsl,imx-rproc.yaml index fc16d90335..3a1f59ad79 100644 --- a/dts/Bindings/remoteproc/fsl,imx-rproc.yaml +++ b/dts/Bindings/remoteproc/fsl,imx-rproc.yaml @@ -15,14 +15,15 @@ maintainers: properties: compatible: enum: - - fsl,imx8mq-cm4 + - fsl,imx6sx-cm4 + - fsl,imx7d-cm4 + - fsl,imx7ulp-cm4 - fsl,imx8mm-cm4 - fsl,imx8mn-cm7 - fsl,imx8mp-cm7 + - fsl,imx8mq-cm4 - fsl,imx8ulp-cm33 - - fsl,imx7d-cm4 - - fsl,imx7ulp-cm4 - - fsl,imx6sx-cm4 + - fsl,imx93-cm33 clocks: maxItems: 1 diff --git a/dts/Bindings/remoteproc/mtk,scp.yaml b/dts/Bindings/remoteproc/mtk,scp.yaml index 5b693a2d04..eec3b9c4c7 100644 --- a/dts/Bindings/remoteproc/mtk,scp.yaml +++ b/dts/Bindings/remoteproc/mtk,scp.yaml @@ -23,11 +23,13 @@ properties: reg: description: - Should contain the address ranges for memory regions SRAM, CFG, and - L1TCM. + Should contain the address ranges for memory regions SRAM, CFG, and, + on some platforms, L1TCM. + minItems: 2 maxItems: 3 reg-names: + minItems: 2 items: - const: sram - const: cfg @@ -42,21 +44,48 @@ properties: clock-names: const: main + interrupts: + maxItems: 1 + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: + If present, name (or relative path) of the file within the + firmware search path containing the firmware image used when + initializing SCP. + + memory-region: + maxItems: 1 + required: - compatible - reg - reg-names -if: - properties: - compatible: - enum: - - mediatek,mt8183-scp - - mediatek,mt8192-scp -then: - required: - - clocks - - clock-names +allOf: + - if: + properties: + compatible: + enum: + - mediatek,mt8183-scp + - mediatek,mt8192-scp + then: + required: + - clocks + - clock-names + + - if: + properties: + compatible: + enum: + - mediatek,mt8183-scp + - mediatek,mt8186-scp + then: + properties: + reg: + maxItems: 2 + reg-names: + maxItems: 2 additionalProperties: type: object @@ -76,10 +105,10 @@ additionalProperties: examples: - | - #include + #include scp@10500000 { - compatible = "mediatek,mt8183-scp"; + compatible = "mediatek,mt8192-scp"; reg = <0x10500000 0x80000>, <0x10700000 0x8000>, <0x10720000 0xe0000>; diff --git a/dts/Bindings/remoteproc/qcom,adsp.yaml b/dts/Bindings/remoteproc/qcom,adsp.yaml index a4409c3981..947f94548d 100644 --- a/dts/Bindings/remoteproc/qcom,adsp.yaml +++ b/dts/Bindings/remoteproc/qcom,adsp.yaml @@ -16,6 +16,7 @@ description: properties: compatible: enum: + - qcom,msm8226-adsp-pil - qcom,msm8974-adsp-pil - qcom,msm8996-adsp-pil - qcom,msm8996-slpi-pil @@ -29,6 +30,9 @@ properties: - qcom,sc8180x-adsp-pas - qcom,sc8180x-cdsp-pas - qcom,sc8180x-mpss-pas + - qcom,sc8280xp-adsp-pas + - qcom,sc8280xp-nsp0-pas + - qcom,sc8280xp-nsp1-pas - qcom,sdm660-adsp-pas - qcom,sdm845-adsp-pas - qcom,sdm845-cdsp-pas @@ -159,6 +163,7 @@ allOf: compatible: contains: enum: + - qcom,msm8226-adsp-pil - qcom,msm8974-adsp-pil - qcom,msm8996-adsp-pil - qcom,msm8996-slpi-pil @@ -169,6 +174,9 @@ allOf: - qcom,sc8180x-adsp-pas - qcom,sc8180x-cdsp-pas - qcom,sc8180x-mpss-pas + - qcom,sc8280xp-adsp-pas + - qcom,sc8280xp-nsp0-pas + - qcom,sc8280xp-nsp1-pas - qcom,sdm845-adsp-pas - qcom,sdm845-cdsp-pas - qcom,sm6350-adsp-pas @@ -274,6 +282,7 @@ allOf: compatible: contains: enum: + - qcom,msm8226-adsp-pil - qcom,msm8974-adsp-pil - qcom,msm8996-adsp-pil - qcom,msm8996-slpi-pil @@ -284,6 +293,9 @@ allOf: - qcom,qcs404-wcss-pas - qcom,sc8180x-adsp-pas - qcom,sc8180x-cdsp-pas + - qcom,sc8280xp-adsp-pas + - qcom,sc8280xp-nsp0-pas + - qcom,sc8280xp-nsp1-pas - qcom,sdm845-adsp-pas - qcom,sdm845-cdsp-pas - qcom,sm6350-adsp-pas @@ -364,6 +376,7 @@ allOf: compatible: contains: enum: + - qcom,msm8226-adsp-pil - qcom,msm8996-adsp-pil - qcom,msm8998-adsp-pas then: @@ -471,6 +484,7 @@ allOf: enum: - qcom,sc8180x-adsp-pas - qcom,sc8180x-cdsp-pas + - qcom,sc8280xp-adsp-pas - qcom,sm6350-adsp-pas - qcom,sm8150-slpi-pas - qcom,sm8250-adsp-pas @@ -508,6 +522,22 @@ allOf: - const: cx - const: mxc + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8280xp-nsp0-pas + - qcom,sc8280xp-nsp1-pas + then: + properties: + power-domains: + items: + - description: NSP power domain + power-domain-names: + items: + - const: nsp + - if: properties: compatible: @@ -546,6 +576,7 @@ allOf: compatible: contains: enum: + - qcom,msm8226-adsp-pil - qcom,msm8974-adsp-pil - qcom,msm8996-adsp-pil - qcom,msm8996-slpi-pil diff --git a/dts/Bindings/remoteproc/qcom,q6v5.txt b/dts/Bindings/remoteproc/qcom,q6v5.txt index 8f1507052a..b677900b3a 100644 --- a/dts/Bindings/remoteproc/qcom,q6v5.txt +++ b/dts/Bindings/remoteproc/qcom,q6v5.txt @@ -250,7 +250,7 @@ the memory regions used by the Hexagon firmware. Each sub-node must contain: The Hexagon node may also have an subnode named either "smd-edge" or "glink-edge" that describes the communication edge, channels and devices -related to the Hexagon. See ../soc/qcom/qcom,smd.txt and +related to the Hexagon. See ../soc/qcom/qcom,smd.yaml and ../soc/qcom/qcom,glink.txt for details on how to describe these. = EXAMPLE diff --git a/dts/Bindings/remoteproc/qcom,wcnss-pil.txt b/dts/Bindings/remoteproc/qcom,wcnss-pil.txt index a83080b890..ac423f4c3f 100644 --- a/dts/Bindings/remoteproc/qcom,wcnss-pil.txt +++ b/dts/Bindings/remoteproc/qcom,wcnss-pil.txt @@ -111,7 +111,7 @@ and its resource dependencies. It is described by the following properties: The wcnss node can also have an subnode named "smd-edge" that describes the SMD edge, channels and devices related to the WCNSS. -See ../soc/qcom/qcom,smd.txt for details on how to describe the SMD edge. +See ../soc/qcom/qcom,smd.yaml for details on how to describe the SMD edge. = EXAMPLE The following example describes the resources needed to boot control the WCNSS, diff --git a/dts/Bindings/remoteproc/st,stm32-rproc.yaml b/dts/Bindings/remoteproc/st,stm32-rproc.yaml index be3d9b0e87..da50f0e99f 100644 --- a/dts/Bindings/remoteproc/st,stm32-rproc.yaml +++ b/dts/Bindings/remoteproc/st,stm32-rproc.yaml @@ -43,8 +43,8 @@ properties: items: - items: - description: Phandle of syscon block - - description: FIXME - - description: FIXME + - description: The offset of the trust zone setting register + - description: The field mask of the trust zone state interrupts: description: Should contain the WWDG1 watchdog reset interrupt @@ -101,8 +101,8 @@ properties: items: - items: - description: Phandle of syscon block - - description: FIXME - - description: FIXME + - description: The offset of the power setting register + - description: The field mask of the PDDS selection st,syscfg-m4-state: $ref: "/schemas/types.yaml#/definitions/phandle-array" @@ -111,8 +111,8 @@ properties: items: - items: - description: Phandle of syscon block with the tamp register - - description: FIXME - - description: FIXME + - description: The offset of the tamp register + - description: The field mask of the Cortex-M4 state st,syscfg-rsc-tbl: $ref: "/schemas/types.yaml#/definitions/phandle-array" @@ -122,8 +122,8 @@ properties: items: - items: - description: Phandle of syscon block with the tamp register - - description: FIXME - - description: FIXME + - description: The offset of the tamp register + - description: The field mask of the Cortex-M4 resource table address st,auto-boot: $ref: /schemas/types.yaml#/definitions/flag diff --git a/dts/Bindings/reserved-memory/phram.yaml b/dts/Bindings/reserved-memory/phram.yaml new file mode 100644 index 0000000000..6c4db28015 --- /dev/null +++ b/dts/Bindings/reserved-memory/phram.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reserved-memory/phram.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MTD/block device in RAM + +description: | + Specifies that the reserved memory region can be used as an MTD or block + device. + + The "phram" node is named after the "MTD in PHysical RAM" driver which + provides an implementation of this functionality in Linux. + +maintainers: + - Vincent Whitchurch + +allOf: + - $ref: "reserved-memory.yaml" + - $ref: "/schemas/mtd/mtd.yaml" + +properties: + compatible: + const: phram + + reg: + description: region of memory that can be used as an MTD/block device + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + + phram: flash@12340000 { + compatible = "phram"; + label = "rootfs"; + reg = <0x12340000 0x00800000>; + }; + }; diff --git a/dts/Bindings/reserved-memory/ramoops.yaml b/dts/Bindings/reserved-memory/ramoops.yaml index f4c351a695..0391871cf4 100644 --- a/dts/Bindings/reserved-memory/ramoops.yaml +++ b/dts/Bindings/reserved-memory/ramoops.yaml @@ -142,4 +142,3 @@ examples: }; }; }; - diff --git a/dts/Bindings/reset/altr,rst-mgr.yaml b/dts/Bindings/reset/altr,rst-mgr.yaml new file mode 100644 index 0000000000..4379cec6b3 --- /dev/null +++ b/dts/Bindings/reset/altr,rst-mgr.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/altr,rst-mgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera SOCFPGA Reset Manager + +maintainers: + - Dinh Nguyen + +properties: + compatible: + oneOf: + - description: Cyclone5/Arria5/Arria10 + const: altr,rst-mgr + - description: Stratix10 ARM64 SoC + items: + - const: altr,stratix10-rst-mgr + - const: altr,rst-mgr + + reg: + maxItems: 1 + + altr,modrst-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset of the first modrst register + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - altr,modrst-offset + - '#reset-cells' + +additionalProperties: false + +examples: + - | + rstmgr@ffd05000 { + compatible = "altr,rst-mgr"; + reg = <0xffd05000 0x1000>; + altr,modrst-offset = <0x10>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt b/dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt deleted file mode 100644 index 43e580ef64..0000000000 --- a/dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Amlogic audio memory arbiter controller - -The Amlogic Audio ARB is a simple device which enables or -disables the access of Audio FIFOs to DDR on AXG based SoC. - -Required properties: -- compatible: 'amlogic,meson-axg-audio-arb' or - 'amlogic,meson-sm1-audio-arb' -- reg: physical base address of the controller and length of memory - mapped region. -- clocks: phandle to the fifo peripheral clock provided by the audio - clock controller. -- #reset-cells: must be 1. - -Example on the A113 SoC: - -arb: reset-controller@280 { - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; -}; diff --git a/dts/Bindings/reset/amlogic,meson-axg-audio-arb.yaml b/dts/Bindings/reset/amlogic,meson-axg-audio-arb.yaml new file mode 100644 index 0000000000..704a502adc --- /dev/null +++ b/dts/Bindings/reset/amlogic,meson-axg-audio-arb.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/amlogic,meson-axg-audio-arb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic audio memory arbiter controller + +maintainers: + - Jerome Brunet + +description: The Amlogic Audio ARB is a simple device which enables or disables + the access of Audio FIFOs to DDR on AXG based SoC. + +properties: + compatible: + enum: + - amlogic,meson-axg-audio-arb + - amlogic,meson-sm1-audio-arb + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: | + phandle to the fifo peripheral clock provided by the audio clock + controller. + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - "#reset-cells" + +additionalProperties: false + +examples: + - | + // on the A113 SoC: + #include + bus { + #address-cells = <2>; + #size-cells = <2>; + + arb: reset-controller@280 { + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + }; diff --git a/dts/Bindings/reset/amlogic,meson-reset.yaml b/dts/Bindings/reset/amlogic,meson-reset.yaml index 92922d3afd..494a454928 100644 --- a/dts/Bindings/reset/amlogic,meson-reset.yaml +++ b/dts/Bindings/reset/amlogic,meson-reset.yaml @@ -17,6 +17,7 @@ properties: - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs + - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs reg: maxItems: 1 diff --git a/dts/Bindings/reset/ath79-reset.txt b/dts/Bindings/reset/ath79-reset.txt deleted file mode 100644 index 4c56330bf3..0000000000 --- a/dts/Bindings/reset/ath79-reset.txt +++ /dev/null @@ -1,20 +0,0 @@ -Binding for Qualcomm Atheros AR7xxx/AR9XXX reset controller - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required Properties: -- compatible: has to be "qca,-reset", "qca,ar7100-reset" - as fallback -- reg: Base address and size of the controllers memory area -- #reset-cells : Specifies the number of cells needed to encode reset - line, should be 1 - -Example: - - reset-controller@1806001c { - compatible = "qca,ar9132-reset", "qca,ar7100-reset"; - reg = <0x1806001c 0x4>; - - #reset-cells = <1>; - }; diff --git a/dts/Bindings/reset/berlin,reset.txt b/dts/Bindings/reset/berlin,reset.txt deleted file mode 100644 index 514fee098b..0000000000 --- a/dts/Bindings/reset/berlin,reset.txt +++ /dev/null @@ -1,23 +0,0 @@ -Marvell Berlin reset controller -=============================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -The reset controller node must be a sub-node of the chip controller -node on Berlin SoCs. - -Required properties: -- compatible: should be "marvell,berlin2-reset" -- #reset-cells: must be set to 2 - -Example: - -chip_rst: reset { - compatible = "marvell,berlin2-reset"; - #reset-cells = <2>; -}; - -&usb_phy0 { - resets = <&chip_rst 0x104 12>; -}; diff --git a/dts/Bindings/reset/bitmain,bm1880-reset.txt b/dts/Bindings/reset/bitmain,bm1880-reset.txt deleted file mode 100644 index a6f8455ae6..0000000000 --- a/dts/Bindings/reset/bitmain,bm1880-reset.txt +++ /dev/null @@ -1,18 +0,0 @@ -Bitmain BM1880 SoC Reset Controller -=================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be "bitmain,bm1880-reset" -- reg: Offset and length of reset controller space in SCTRL. -- #reset-cells: Must be 1. - -Example: - - rst: reset-controller@c00 { - compatible = "bitmain,bm1880-reset"; - reg = <0xc00 0x8>; - #reset-cells = <1>; - }; diff --git a/dts/Bindings/reset/bitmain,bm1880-reset.yaml b/dts/Bindings/reset/bitmain,bm1880-reset.yaml new file mode 100644 index 0000000000..f0aca74438 --- /dev/null +++ b/dts/Bindings/reset/bitmain,bm1880-reset.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Manivannan Sadhasivam +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/bitmain,bm1880-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Bitmain BM1880 SoC Reset Controller + +maintainers: + - Manivannan Sadhasivam + +properties: + compatible: + const: bitmain,bm1880-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + rst: reset-controller@c00 { + compatible = "bitmain,bm1880-reset"; + reg = <0xc00 0x8>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/reset/hisilicon,hi6220-reset.txt b/dts/Bindings/reset/hisilicon,hi6220-reset.txt deleted file mode 100644 index ea0a6a9734..0000000000 --- a/dts/Bindings/reset/hisilicon,hi6220-reset.txt +++ /dev/null @@ -1,37 +0,0 @@ -Hisilicon System Reset Controller -====================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -The reset controller registers are part of the system-ctl block on -hi6220 SoC. - -Required properties: -- compatible: should be one of the following: - - "hisilicon,hi6220-sysctrl", "syscon" : For peripheral reset controller. - - "hisilicon,hi6220-mediactrl", "syscon" : For media reset controller. - - "hisilicon,hi6220-aoctrl", "syscon" : For ao reset controller. -- reg: should be register base and length as documented in the - datasheet -- #reset-cells: 1, see below - -Example: -sys_ctrl: sys_ctrl@f7030000 { - compatible = "hisilicon,hi6220-sysctrl", "syscon"; - reg = <0x0 0xf7030000 0x0 0x2000>; - #clock-cells = <1>; - #reset-cells = <1>; -}; - -Specifying reset lines connected to IP modules -============================================== -example: - - uart1: serial@..... { - ... - resets = <&sys_ctrl PERIPH_RSTEN3_UART1>; - ... - }; - -The index could be found in . diff --git a/dts/Bindings/reset/lantiq,reset.txt b/dts/Bindings/reset/lantiq,reset.txt deleted file mode 100644 index c6aef36b7d..0000000000 --- a/dts/Bindings/reset/lantiq,reset.txt +++ /dev/null @@ -1,30 +0,0 @@ -Lantiq XWAY SoC RCU reset controller binding -============================================ - -This binding describes a reset-controller found on the RCU module on Lantiq -XWAY SoCs. - -This node has to be a sub node of the Lantiq RCU block. - -------------------------------------------------------------------------------- -Required properties: -- compatible : Should be one of - "lantiq,danube-reset" - "lantiq,xrx200-reset" -- reg : Defines the following sets of registers in the parent - syscon device - - Offset of the reset set register - - Offset of the reset status register -- #reset-cells : Specifies the number of cells needed to encode the - reset line, should be 2. - The first cell takes the reset set bit and the - second cell takes the status bit. - -------------------------------------------------------------------------------- -Example for the reset-controllers on the xRX200 SoCs: - reset0: reset-controller@10 { - compatible = "lantiq,xrx200-reset"; - reg <0x10 0x04>, <0x14 0x04>; - - #reset-cells = <2>; - }; diff --git a/dts/Bindings/reset/lantiq,reset.yaml b/dts/Bindings/reset/lantiq,reset.yaml new file mode 100644 index 0000000000..15d65a5dd6 --- /dev/null +++ b/dts/Bindings/reset/lantiq,reset.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/lantiq,reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq XWAY SoC RCU reset controller + +maintainers: + - Martin Blumenstingl + +description: | + This binding describes a reset-controller found on the RCU module on Lantiq + XWAY SoCs. This node has to be a sub node of the Lantiq RCU block. + +properties: + compatible: + enum: + - lantiq,danube-reset + - lantiq,xrx200-reset + + reg: + description: | + Defines the following sets of registers in the parent syscon device + Offset of the reset set register + Offset of the reset status register + maxItems: 2 + + '#reset-cells': + description: | + The first cell takes the reset set bit and the second cell takes the + status bit. + const: 2 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + // On the xRX200 SoCs: + reset0: reset-controller@10 { + compatible = "lantiq,xrx200-reset"; + reg = <0x10 0x04>, <0x14 0x04>; + #reset-cells = <2>; + }; diff --git a/dts/Bindings/reset/marvell,berlin2-reset.yaml b/dts/Bindings/reset/marvell,berlin2-reset.yaml new file mode 100644 index 0000000000..d71d0f0a13 --- /dev/null +++ b/dts/Bindings/reset/marvell,berlin2-reset.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2015 Antoine Tenart +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/marvell,berlin2-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Marvell Berlin reset controller + +maintainers: + - Antoine Tenart + +description: The reset controller node must be a sub-node of the chip + controller node on Berlin SoCs. + +properties: + compatible: + const: marvell,berlin2-reset + + "#reset-cells": + const: 2 + +required: + - compatible + - "#reset-cells" + +additionalProperties: false + +examples: + - | + chip: chip-control@ea0000 { + reg = <0xea0000 0x400>; + + chip_rst: reset { + compatible = "marvell,berlin2-reset"; + #reset-cells = <2>; + }; + }; diff --git a/dts/Bindings/reset/microchip,rst.yaml b/dts/Bindings/reset/microchip,rst.yaml index 578bfa529b..81cd8c8376 100644 --- a/dts/Bindings/reset/microchip,rst.yaml +++ b/dts/Bindings/reset/microchip,rst.yaml @@ -57,4 +57,3 @@ examples: #reset-cells = <1>; cpu-syscon = <&cpu_ctrl>; }; - diff --git a/dts/Bindings/reset/nuvoton,npcm-reset.txt b/dts/Bindings/reset/nuvoton,npcm-reset.txt deleted file mode 100644 index 17b7a6a43a..0000000000 --- a/dts/Bindings/reset/nuvoton,npcm-reset.txt +++ /dev/null @@ -1,32 +0,0 @@ -Nuvoton NPCM Reset controller - -Required properties: -- compatible : "nuvoton,npcm750-reset" for NPCM7XX BMC -- reg : specifies physical base address and size of the register. -- #reset-cells: must be set to 2 - -Optional property: -- nuvoton,sw-reset-number - Contains the software reset number to restart the SoC. - NPCM7xx contain four software reset that represent numbers 1 to 4. - - If 'nuvoton,sw-reset-number' is not specified software reset is disabled. - -Example: - rstc: rstc@f0801000 { - compatible = "nuvoton,npcm750-reset"; - reg = <0xf0801000 0x70>; - #reset-cells = <2>; - nuvoton,sw-reset-number = <2>; - }; - -Specifying reset lines connected to IP NPCM7XX modules -====================================================== -example: - - spi0: spi@..... { - ... - resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>; - ... - }; - -The index could be found in . diff --git a/dts/Bindings/reset/nuvoton,npcm750-reset.yaml b/dts/Bindings/reset/nuvoton,npcm750-reset.yaml new file mode 100644 index 0000000000..fa5e4ea640 --- /dev/null +++ b/dts/Bindings/reset/nuvoton,npcm750-reset.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/nuvoton,npcm750-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Reset controller + +maintainers: + - Tomer Maimon + +properties: + compatible: + const: nuvoton,npcm750-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 2 + + nuvoton,sw-reset-number: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + description: | + Contains the software reset number to restart the SoC. + If not specified, software reset is disabled. + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include + rstc: rstc@f0801000 { + compatible = "nuvoton,npcm750-reset"; + reg = <0xf0801000 0x70>; + #reset-cells = <2>; + nuvoton,sw-reset-number = <2>; + }; + + // Specifying reset lines connected to IP NPCM7XX modules + spi0: spi { + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>; + }; diff --git a/dts/Bindings/reset/qca,ar7100-reset.yaml b/dts/Bindings/reset/qca,ar7100-reset.yaml new file mode 100644 index 0000000000..9be60e55cd --- /dev/null +++ b/dts/Bindings/reset/qca,ar7100-reset.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2015 Alban Bedel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/qca,ar7100-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Atheros AR7xxx/AR9XXX reset controller + +maintainers: + - Alban Bedel + +properties: + compatible: + items: + - enum: + - qca,ar9132-reset + - qca,ar9331-reset + - const: qca,ar7100-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset-controller@1806001c { + compatible = "qca,ar9132-reset", "qca,ar7100-reset"; + reg = <0x1806001c 0x4>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/reset/qcom,aoss-reset.yaml b/dts/Bindings/reset/qcom,aoss-reset.yaml index a054757f4d..d92e2b3cc8 100644 --- a/dts/Bindings/reset/qcom,aoss-reset.yaml +++ b/dts/Bindings/reset/qcom,aoss-reset.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm AOSS Reset Controller maintainers: - - Sibi Sankar + - Sibi Sankar description: The bindings describe the reset-controller found on AOSS-CC (always on diff --git a/dts/Bindings/reset/qcom,pdc-global.yaml b/dts/Bindings/reset/qcom,pdc-global.yaml index 831ea8d5d8..ca5d793321 100644 --- a/dts/Bindings/reset/qcom,pdc-global.yaml +++ b/dts/Bindings/reset/qcom,pdc-global.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm PDC Global maintainers: - - Sibi Sankar + - Sibi Sankar description: The bindings describes the reset-controller found on PDC-Global (Power Domain diff --git a/dts/Bindings/reset/renesas,rst.yaml b/dts/Bindings/reset/renesas,rst.yaml index bbe313bf17..0d1b89e2fe 100644 --- a/dts/Bindings/reset/renesas,rst.yaml +++ b/dts/Bindings/reset/renesas,rst.yaml @@ -49,6 +49,7 @@ properties: - renesas,r8a77995-rst # R-Car D3 - renesas,r8a779a0-rst # R-Car V3U - renesas,r8a779f0-rst # R-Car S4-8 + - renesas,r8a779g0-rst # R-Car V4H reg: maxItems: 1 diff --git a/dts/Bindings/reset/snps,axs10x-reset.txt b/dts/Bindings/reset/snps,axs10x-reset.txt deleted file mode 100644 index 32d8435a41..0000000000 --- a/dts/Bindings/reset/snps,axs10x-reset.txt +++ /dev/null @@ -1,33 +0,0 @@ -Binding for the AXS10x reset controller - -This binding describes the ARC AXS10x boards custom IP-block which allows -to control reset signals of selected peripherals. For example DW GMAC, etc... -This block is controlled via memory-mapped register (AKA CREG) which -represents up-to 32 reset lines. - -As of today only the following lines are used: - - DW GMAC - line 5 - -This binding uses the common reset binding[1]. - -[1] Documentation/devicetree/bindings/reset/reset.txt - -Required properties: -- compatible: should be "snps,axs10x-reset". -- reg: should always contain pair address - length: for creg reset - bits register. -- #reset-cells: from common reset binding; Should always be set to 1. - -Example: - reset: reset-controller@11220 { - compatible = "snps,axs10x-reset"; - #reset-cells = <1>; - reg = <0x11220 0x4>; - }; - -Specifying reset lines connected to IP modules: - ethernet@.... { - .... - resets = <&reset 5>; - .... - }; diff --git a/dts/Bindings/reset/snps,axs10x-reset.yaml b/dts/Bindings/reset/snps,axs10x-reset.yaml new file mode 100644 index 0000000000..a75db3d405 --- /dev/null +++ b/dts/Bindings/reset/snps,axs10x-reset.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/snps,axs10x-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AXS10x reset controller + +maintainers: + - Eugeniy Paltsev + +description: | + This binding describes the ARC AXS10x boards custom IP-block which allows + to control reset signals of selected peripherals. For example DW GMAC, etc... + This block is controlled via memory-mapped register (AKA CREG) which + represents up-to 32 reset lines. + As of today only the following lines are used: + - DW GMAC - line 5 + +properties: + compatible: + const: snps,axs10x-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + reset: reset-controller@11220 { + compatible = "snps,axs10x-reset"; + #reset-cells = <1>; + reg = <0x11220 0x4>; + }; + + // Specifying reset lines connected to IP modules: + ethernet { + resets = <&reset 5>; + }; diff --git a/dts/Bindings/reset/socfpga-reset.txt b/dts/Bindings/reset/socfpga-reset.txt deleted file mode 100644 index 38fe34fd8b..0000000000 --- a/dts/Bindings/reset/socfpga-reset.txt +++ /dev/null @@ -1,16 +0,0 @@ -Altera SOCFPGA Reset Manager - -Required properties: -- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10) - "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC -- reg : Should contain 1 register ranges(address and length) -- altr,modrst-offset : Should contain the offset of the first modrst register. -- #reset-cells: 1 - -Example: - rstmgr@ffd05000 { - #reset-cells = <1>; - compatible = "altr,rst-mgr"; - reg = <0xffd05000 0x1000>; - altr,modrst-offset = <0x10>; - }; diff --git a/dts/Bindings/reset/socionext,uniphier-glue-reset.yaml b/dts/Bindings/reset/socionext,uniphier-glue-reset.yaml index bfbd3e9b41..0a2c13e1e2 100644 --- a/dts/Bindings/reset/socionext,uniphier-glue-reset.yaml +++ b/dts/Bindings/reset/socionext,uniphier-glue-reset.yaml @@ -38,25 +38,49 @@ properties: minItems: 1 maxItems: 2 - clock-names: - oneOf: - - items: # for Pro4, Pro5 - - const: gio - - const: link - - items: # for others - - const: link + clock-names: true resets: minItems: 1 maxItems: 2 - reset-names: - oneOf: - - items: # for Pro4, Pro5 - - const: gio - - const: link - - items: # for others - - const: link + reset-names: true + +allOf: + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pro4-usb3-reset + - socionext,uniphier-pro5-usb3-reset + - socionext,uniphier-pro4-ahci-reset + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: link + else: + properties: + clocks: + maxItems: 1 + clock-names: + const: link + resets: + maxItems: 1 + reset-names: + const: link additionalProperties: false diff --git a/dts/Bindings/reset/st,sti-picophyreset.txt b/dts/Bindings/reset/st,sti-picophyreset.txt deleted file mode 100644 index 9ca27761f8..0000000000 --- a/dts/Bindings/reset/st,sti-picophyreset.txt +++ /dev/null @@ -1,42 +0,0 @@ -STMicroelectronics STi family Sysconfig Picophy SoftReset Controller -============================================================================= - -This binding describes a reset controller device that is used to enable and -disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in -the STi family SoC system configuration registers. - -The actual action taken when softreset is asserted is hardware dependent. -However, when asserted it may not be possible to access the hardware's -registers and after an assert/deassert sequence the hardware's previous state -may no longer be valid. - -Please refer to Documentation/devicetree/bindings/reset/reset.txt -for common reset controller binding usage. - -Required properties: -- compatible: Should be "st,stih407-picophyreset" -- #reset-cells: 1, see below - -Example: - - picophyreset: picophyreset-controller { - compatible = "st,stih407-picophyreset"; - #reset-cells = <1>; - }; - -Specifying picophyreset control of devices -======================================= - -Device nodes should specify the reset channel required in their "resets" -property, containing a phandle to the picophyreset device node and an -index specifying which channel to use, as described in -Documentation/devicetree/bindings/reset/reset.txt. - -Example: - - usb2_picophy0: usbpicophy@0 { - resets = <&picophyreset STIH407_PICOPHY0_RESET>; - }; - -Macro definitions for the supported reset channels can be found in: -include/dt-bindings/reset/stih407-resets.h diff --git a/dts/Bindings/reset/st,sti-powerdown.txt b/dts/Bindings/reset/st,sti-powerdown.txt deleted file mode 100644 index 92527138bc..0000000000 --- a/dts/Bindings/reset/st,sti-powerdown.txt +++ /dev/null @@ -1,45 +0,0 @@ -STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller -============================================================================= - -This binding describes a reset controller device that is used to enable and -disable on-chip peripheral controllers such as USB and SATA, using -"powerdown" control bits found in the STi family SoC system configuration -registers. These have been grouped together into a single reset controller -device for convenience. - -The actual action taken when powerdown is asserted is hardware dependent. -However, when asserted it may not be possible to access the hardware's -registers and after an assert/deassert sequence the hardware's previous state -may no longer be valid. - -Please refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be "st,stih407-powerdown" -- #reset-cells: 1, see below - -example: - - powerdown: powerdown-controller { - compatible = "st,stih407-powerdown"; - #reset-cells = <1>; - }; - - -Specifying powerdown control of devices -======================================= - -Device nodes should specify the reset channel required in their "resets" -property, containing a phandle to the powerdown device node and an -index specifying which channel to use, as described in reset.txt - -example: - - st_dwc3: dwc3@8f94000 { - resets = <&powerdown STIH407_USB3_POWERDOWN>, - }; - -Macro definitions for the supported reset channels can be found in: - -include/dt-bindings/reset/stih407-resets.h diff --git a/dts/Bindings/reset/st,stih407-picophyreset.yaml b/dts/Bindings/reset/st,stih407-picophyreset.yaml new file mode 100644 index 0000000000..329ae4ae1a --- /dev/null +++ b/dts/Bindings/reset/st,stih407-picophyreset.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/st,stih407-picophyreset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi family Sysconfig Picophy SoftReset Controller + +maintainers: + - Peter Griffin + +description: | + This binding describes a reset controller device that is used to enable and + disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in + the STi family SoC system configuration registers. + + The actual action taken when softreset is asserted is hardware dependent. + However, when asserted it may not be possible to access the hardware's + registers and after an assert/deassert sequence the hardware's previous state + may no longer be valid. + +properties: + compatible: + const: st,stih407-picophyreset + + '#reset-cells': + const: 1 + +required: + - compatible + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include + + picophyreset: picophyreset-controller { + compatible = "st,stih407-picophyreset"; + #reset-cells = <1>; + }; + + // Specifying picophyreset control of devices + usb2_picophy0: usbpicophy { + resets = <&picophyreset STIH407_PICOPHY0_RESET>; + }; diff --git a/dts/Bindings/reset/st,stih407-powerdown.yaml b/dts/Bindings/reset/st,stih407-powerdown.yaml new file mode 100644 index 0000000000..d3790e6026 --- /dev/null +++ b/dts/Bindings/reset/st,stih407-powerdown.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/st,stih407-powerdown.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller + +maintainers: + - Srinivas Kandagatla + +description: | + This binding describes a reset controller device that is used to enable and + disable on-chip peripheral controllers such as USB and SATA, using + "powerdown" control bits found in the STi family SoC system configuration + registers. These have been grouped together into a single reset controller + device for convenience. + + The actual action taken when powerdown is asserted is hardware dependent. + However, when asserted it may not be possible to access the hardware's + registers and after an assert/deassert sequence the hardware's previous state + may no longer be valid. + +properties: + compatible: + const: st,stih407-powerdown + + '#reset-cells': + const: 1 + +required: + - compatible + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include + + powerdown: powerdown-controller { + compatible = "st,stih407-powerdown"; + #reset-cells = <1>; + }; + + // Specifying powerdown control of devices: + st_dwc3: dwc3 { + resets = <&powerdown STIH407_USB3_POWERDOWN>; + }; diff --git a/dts/Bindings/riscv/microchip.yaml b/dts/Bindings/riscv/microchip.yaml index 3f981e8971..1aa7336a96 100644 --- a/dts/Bindings/riscv/microchip.yaml +++ b/dts/Bindings/riscv/microchip.yaml @@ -20,6 +20,8 @@ properties: items: - enum: - microchip,mpfs-icicle-kit + - microchip,mpfs-icicle-reference-rtlv2203 + - sundance,polarberry - const: microchip,mpfs additionalProperties: true diff --git a/dts/Bindings/rng/intel,ixp46x-rng.yaml b/dts/Bindings/rng/intel,ixp46x-rng.yaml index 61963fa934..067e71e8eb 100644 --- a/dts/Bindings/rng/intel,ixp46x-rng.yaml +++ b/dts/Bindings/rng/intel,ixp46x-rng.yaml @@ -33,4 +33,3 @@ examples: compatible = "intel,ixp46x-rng"; reg = <0x70002100 4>; }; - diff --git a/dts/Bindings/rng/st,stm32-rng.yaml b/dts/Bindings/rng/st,stm32-rng.yaml index 9a6e4eaf4d..fcd86f822a 100644 --- a/dts/Bindings/rng/st,stm32-rng.yaml +++ b/dts/Bindings/rng/st,stm32-rng.yaml @@ -27,6 +27,7 @@ properties: maxItems: 1 clock-error-detect: + type: boolean description: If set enable the clock detection management required: diff --git a/dts/Bindings/rtc/nxp,pcf85063.txt b/dts/Bindings/rtc/nxp,pcf85063.txt index 6439682c93..217b7cd06c 100644 --- a/dts/Bindings/rtc/nxp,pcf85063.txt +++ b/dts/Bindings/rtc/nxp,pcf85063.txt @@ -2,6 +2,7 @@ Required properties: - compatible: Should one of contain: + "nxp,pca85073a", "nxp,pcf85063", "nxp,pcf85063a", "nxp,pcf85063tp", diff --git a/dts/Bindings/rtc/renesas,rzn1-rtc.yaml b/dts/Bindings/rtc/renesas,rzn1-rtc.yaml new file mode 100644 index 0000000000..2d4741f516 --- /dev/null +++ b/dts/Bindings/rtc/renesas,rzn1-rtc.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/renesas,rzn1-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 SoCs Real-Time Clock DT bindings + +maintainers: + - Miquel Raynal + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r9a06g032-rtc + - const: renesas,rzn1-rtc + + reg: + maxItems: 1 + + interrupts: + minItems: 3 + maxItems: 3 + + interrupt-names: + items: + - const: alarm + - const: timer + - const: pps + + clocks: + maxItems: 1 + + clock-names: + const: hclk + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - power-domains + +unevaluatedProperties: false + +examples: + - | + #include + #include + rtc@40006000 { + compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc"; + reg = <0x40006000 0x1000>; + interrupts = , + , + ; + interrupt-names = "alarm", "timer", "pps"; + clocks = <&sysctrl R9A06G032_HCLK_RTC>; + clock-names = "hclk"; + power-domains = <&sysctrl>; + start-year = <2000>; + }; diff --git a/dts/Bindings/rtc/rtc.txt b/dts/Bindings/rtc/rtc.txt deleted file mode 100644 index b8d36fce5e..0000000000 --- a/dts/Bindings/rtc/rtc.txt +++ /dev/null @@ -1 +0,0 @@ -This file has been moved to rtc.yaml. diff --git a/dts/Bindings/serial/8250.yaml b/dts/Bindings/serial/8250.yaml index 3bab2f27b9..5f6b113d37 100644 --- a/dts/Bindings/serial/8250.yaml +++ b/dts/Bindings/serial/8250.yaml @@ -138,6 +138,7 @@ properties: description: The current active speed of the UART. reg-offset: + $ref: /schemas/types.yaml#/definitions/uint32 description: | Offset to apply to the mapbase from the start of the registers. diff --git a/dts/Bindings/serial/fsl-lpuart.yaml b/dts/Bindings/serial/fsl-lpuart.yaml index ff364bd0fb..30eaa62e1a 100644 --- a/dts/Bindings/serial/fsl-lpuart.yaml +++ b/dts/Bindings/serial/fsl-lpuart.yaml @@ -23,7 +23,9 @@ properties: - fsl,imx8qxp-lpuart - fsl,imxrt1050-lpuart - items: - - const: fsl,imx8ulp-lpuart + - enum: + - fsl,imx93-lpuart + - fsl,imx8ulp-lpuart - const: fsl,imx7ulp-lpuart - items: - enum: diff --git a/dts/Bindings/serial/qcom,msm-uartdm.txt b/dts/Bindings/serial/qcom,msm-uartdm.txt deleted file mode 100644 index 9d098cf73b..0000000000 --- a/dts/Bindings/serial/qcom,msm-uartdm.txt +++ /dev/null @@ -1,81 +0,0 @@ -* MSM Serial UARTDM - -The MSM serial UARTDM hardware is designed for high-speed use cases where the -transmit and/or receive channels can be offloaded to a dma-engine. From a -software perspective it's mostly compatible with the MSM serial UART except -that it supports reading and writing multiple characters at a time. - -Required properties: -- compatible: Should contain at least "qcom,msm-uartdm". - A more specific property should be specified as follows depending - on the version: - "qcom,msm-uartdm-v1.1" - "qcom,msm-uartdm-v1.2" - "qcom,msm-uartdm-v1.3" - "qcom,msm-uartdm-v1.4" -- reg: Should contain UART register locations and lengths. The first - register shall specify the main control registers. An optional second - register location shall specify the GSBI control region. - "qcom,msm-uartdm-v1.3" is the only compatible value that might - need the GSBI control region. -- interrupts: Should contain UART interrupt. -- clocks: Should contain the core clock and the AHB clock. -- clock-names: Should be "core" for the core clock and "iface" for the - AHB clock. - -Optional properties: -- dmas: Should contain dma specifiers for transmit and receive channels -- dma-names: Should contain "tx" for transmit and "rx" for receive channels -- qcom,tx-crci: Identificator for Client Rate Control Interface to be - used with TX DMA channel. Required when using DMA for transmission - with UARTDM v1.3 and below. -- qcom,rx-crci: Identificator for Client Rate Control Interface to be - used with RX DMA channel. Required when using DMA for reception - with UARTDM v1.3 and below. - -Note: Aliases may be defined to ensure the correct ordering of the UARTs. -The alias serialN will result in the UART being assigned port N. If any -serialN alias exists, then an alias must exist for each enabled UART. The -serialN aliases should be in a .dts file instead of in a .dtsi file. - -Examples: - -- A uartdm v1.4 device with dma capabilities. - - serial@f991e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf991e000 0x1000>; - interrupts = <0 108 0x0>; - clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>; - clock-names = "core", "iface"; - dmas = <&dma0 0>, <&dma0 1>; - dma-names = "tx", "rx"; - }; - -- A uartdm v1.3 device without dma capabilities and part of a GSBI complex. - - serial@19c40000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x19c40000 0x1000>, - <0x19c00000 0x1000>; - interrupts = <0 195 0x0>; - clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>; - clock-names = "core", "iface"; - }; - -- serialN alias. - - aliases { - serial0 = &uarta; - serial1 = &uartc; - serial2 = &uartb; - }; - - uarta: serial@12490000 { - }; - - uartb: serial@16340000 { - }; - - uartc: serial@1a240000 { - }; diff --git a/dts/Bindings/serial/qcom,msm-uartdm.yaml b/dts/Bindings/serial/qcom,msm-uartdm.yaml new file mode 100644 index 0000000000..484b9a51f6 --- /dev/null +++ b/dts/Bindings/serial/qcom,msm-uartdm.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/qcom,msm-uartdm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM Serial UARTDM + +maintainers: + - Andy Gross + - Bjorn Andersson + - Krzysztof Kozlowski + +description: | + The MSM serial UARTDM hardware is designed for high-speed use cases where the + transmit and/or receive channels can be offloaded to a dma-engine. From a + software perspective it's mostly compatible with the MSM serial UART except + that it supports reading and writing multiple characters at a time. + + Note:: Aliases may be defined to ensure the correct ordering of the UARTs. + The alias serialN will result in the UART being assigned port N. If any + serialN alias exists, then an alias must exist for each enabled UART. The + serialN aliases should be in a .dts file instead of in a .dtsi file. + +properties: + compatible: + items: + - enum: + - qcom,msm-uartdm-v1.1 + - qcom,msm-uartdm-v1.2 + - qcom,msm-uartdm-v1.3 + - qcom,msm-uartdm-v1.4 + - const: qcom,msm-uartdm + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: iface + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + qcom,rx-crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Identificator for Client Rate Control Interface to be used with RX DMA + channel. Required when using DMA for reception with UARTDM v1.3 and + below. + + qcom,tx-crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Identificator for Client Rate Control Interface to be used with TX DMA + channel. Required when using DMA for transmission with UARTDM v1.3 and + below. + + reg: + minItems: 1 + items: + - description: Main control registers + - description: An optional second register location shall specify the GSBI control region. + +required: + - compatible + - clock-names + - clocks + - interrupts + - reg + +unevaluatedProperties: false + +allOf: + - $ref: /schemas/serial/serial.yaml# + + - if: + properties: + compatible: + contains: + const: qcom,msm-uartdm-v1.3 + then: + properties: + reg: + minItems: 2 + else: + properties: + reg: + maxItems: 1 + +examples: + - | + #include + + serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = ; + clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>; + clock-names = "core", "iface"; + dmas = <&dma0 0>, <&dma0 1>; + dma-names = "tx", "rx"; + }; diff --git a/dts/Bindings/serial/qcom,serial-geni-qcom.yaml b/dts/Bindings/serial/qcom,serial-geni-qcom.yaml new file mode 100644 index 0000000000..05a6999808 --- /dev/null +++ b/dts/Bindings/serial/qcom,serial-geni-qcom.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Geni based QUP UART interface + +maintainers: + - Andy Gross + - Bjorn Andersson + +allOf: + - $ref: /schemas/serial/serial.yaml# + +properties: + compatible: + enum: + - qcom,geni-uart + - qcom,geni-debug-uart + + clocks: + maxItems: 1 + + clock-names: + const: se + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + + interrupts: + minItems: 1 + items: + - description: UART core irq + - description: Wakeup irq (RX GPIO) + + operating-points-v2: true + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0xa88000 0x7000>; + interrupts = ; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-0 = <&qup_uart0_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + }; +... diff --git a/dts/Bindings/serial/renesas,em-uart.yaml b/dts/Bindings/serial/renesas,em-uart.yaml index e98ec48fee..b25aca733b 100644 --- a/dts/Bindings/serial/renesas,em-uart.yaml +++ b/dts/Bindings/serial/renesas,em-uart.yaml @@ -9,12 +9,16 @@ title: Renesas EMMA Mobile UART Interface maintainers: - Magnus Damm -allOf: - - $ref: serial.yaml# - properties: compatible: - const: renesas,em-uart + oneOf: + - items: + - enum: + - renesas,r9a09g011-uart # RZ/V2M + - const: renesas,em-uart # generic EMMA Mobile compatible UART + + - items: + - const: renesas,em-uart # generic EMMA Mobile compatible UART reg: maxItems: 1 @@ -23,10 +27,31 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + items: + - description: UART functional clock + - description: Internal clock to access the registers clock-names: - const: sclk + minItems: 1 + items: + - const: sclk + - const: pclk + +allOf: + - $ref: serial.yaml# + + - if: + properties: + compatible: + contains: + const: renesas,r9a09g011-uart + then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 required: - compatible diff --git a/dts/Bindings/serial/renesas,hscif.yaml b/dts/Bindings/serial/renesas,hscif.yaml index ee9804cd49..87180d95cd 100644 --- a/dts/Bindings/serial/renesas,hscif.yaml +++ b/dts/Bindings/serial/renesas,hscif.yaml @@ -51,10 +51,16 @@ properties: - renesas,hscif-r8a77980 # R-Car V3H - renesas,hscif-r8a77990 # R-Car E3 - renesas,hscif-r8a77995 # R-Car D3 - - renesas,hscif-r8a779a0 # R-Car V3U - const: renesas,rcar-gen3-hscif # R-Car Gen3 and RZ/G2 - const: renesas,hscif # generic HSCIF compatible UART + - items: + - enum: + - renesas,hscif-r8a779a0 # R-Car V3U + - renesas,hscif-r8a779g0 # R-Car V4H + - const: renesas,rcar-gen4-hscif # R-Car Gen4 + - const: renesas,hscif # generic HSCIF compatible UART + reg: maxItems: 1 @@ -113,6 +119,7 @@ if: enum: - renesas,rcar-gen2-hscif - renesas,rcar-gen3-hscif + - renesas,rcar-gen4-hscif then: required: - resets diff --git a/dts/Bindings/serial/renesas,scif.yaml b/dts/Bindings/serial/renesas,scif.yaml index 5d37f8f189..90fe45265f 100644 --- a/dts/Bindings/serial/renesas,scif.yaml +++ b/dts/Bindings/serial/renesas,scif.yaml @@ -60,12 +60,12 @@ properties: - renesas,scif-r8a77980 # R-Car V3H - renesas,scif-r8a77990 # R-Car E3 - renesas,scif-r8a77995 # R-Car D3 - - renesas,scif-r8a779a0 # R-Car V3U - const: renesas,rcar-gen3-scif # R-Car Gen3 and RZ/G2 - const: renesas,scif # generic SCIF compatible UART - items: - enum: + - renesas,scif-r8a779a0 # R-Car V3U - renesas,scif-r8a779f0 # R-Car S4-8 - const: renesas,rcar-gen4-scif # R-Car Gen4 - const: renesas,scif # generic SCIF compatible UART diff --git a/dts/Bindings/serial/rs485.yaml b/dts/Bindings/serial/rs485.yaml index 0c9fa694f8..f2c9c9fe6a 100644 --- a/dts/Bindings/serial/rs485.yaml +++ b/dts/Bindings/serial/rs485.yaml @@ -33,6 +33,11 @@ properties: description: drive RTS low when sending (default is high). $ref: /schemas/types.yaml#/definitions/flag + rs485-rx-active-high: + description: Polarity of receiver enable signal (when separate from RTS). + True indicates active high (default is low). + $ref: /schemas/types.yaml#/definitions/flag + linux,rs485-enabled-at-boot-time: description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl. diff --git a/dts/Bindings/serial/socionext,uniphier-uart.yaml b/dts/Bindings/serial/socionext,uniphier-uart.yaml index d490c7c4b9..3d01cc3557 100644 --- a/dts/Bindings/serial/socionext,uniphier-uart.yaml +++ b/dts/Bindings/serial/socionext,uniphier-uart.yaml @@ -20,7 +20,10 @@ properties: maxItems: 1 clocks: - minItems: 1 + maxItems: 1 + + resets: + maxItems: 1 auto-flow-control: description: enable automatic flow control support. diff --git a/dts/Bindings/serial/sprd-uart.yaml b/dts/Bindings/serial/sprd-uart.yaml index a444bebd2c..da0e2745b5 100644 --- a/dts/Bindings/serial/sprd-uart.yaml +++ b/dts/Bindings/serial/sprd-uart.yaml @@ -35,7 +35,7 @@ properties: clock-names: description: | - "enable" for UART module enable clock, "uart" for UART clock, "source" + "enable" for UART module enable clock, "uart" for UART clock, "source" for UART source (parent) clock. items: - const: enable diff --git a/dts/Bindings/serio/arm,pl050.yaml b/dts/Bindings/serio/arm,pl050.yaml new file mode 100644 index 0000000000..d80f58d154 --- /dev/null +++ b/dts/Bindings/serio/arm,pl050.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serio/arm,pl050.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Ltd. PrimeCell PL050 PS/2 Keyboard/Mouse Interface + +maintainers: + - Andre Przywara + +description: + The Arm PrimeCell PS2 Keyboard/Mouse Interface (KMI) is an AMBA compliant + peripheral that can be used to implement a keyboard or mouse interface that + is IBM PS2 or AT compatible. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + const: arm,pl050 + required: + - compatible + +properties: + compatible: + items: + - const: arm,pl050 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: KMI reference clock, used to generate the bus timing + - description: APB register access clock + + clock-names: + items: + - const: KMIREFCLK + - const: apb_pclk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + serio@70000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <8>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + +... diff --git a/dts/Bindings/soc/amlogic/amlogic,canvas.yaml b/dts/Bindings/soc/amlogic/amlogic,canvas.yaml index 02b2d5ba01..17db87cb9d 100644 --- a/dts/Bindings/soc/amlogic/amlogic,canvas.yaml +++ b/dts/Bindings/soc/amlogic/amlogic,canvas.yaml @@ -48,4 +48,3 @@ examples: compatible = "amlogic,canvas"; reg = <0x48 0x14>; }; - diff --git a/dts/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/dts/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml new file mode 100644 index 0000000000..397f75909b --- /dev/null +++ b/dts/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-dcfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape Device Configuration Unit + +maintainers: + - Shawn Guo + - Li Yang + +description: | + DCFG is the device configuration unit, that provides general purpose + configuration and status for the device. Such as setting the secondary + core start address and release the secondary core from holdoff and + startup. + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,ls1012a-dcfg + - fsl,ls1021a-dcfg + - fsl,ls1043a-dcfg + - fsl,ls1046a-dcfg + - fsl,ls1088a-dcfg + - fsl,ls2080a-dcfg + - fsl,lx2160a-dcfg + - const: syscon + + - items: + - enum: + - fsl,ls1028a-dcfg + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + little-endian: true + big-endian: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +patternProperties: + "^clock-controller@[0-9a-z]+$": + $ref: /schemas/clock/fsl,flexspi-clock.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@1ee0000 { + compatible = "fsl,ls1021a-dcfg", "syscon"; + reg = <0x1ee0000 0x10000>; + }; diff --git a/dts/Bindings/soc/fsl/fsl,layerscape-scfg.yaml b/dts/Bindings/soc/fsl/fsl,layerscape-scfg.yaml new file mode 100644 index 0000000000..8d088b5fe8 --- /dev/null +++ b/dts/Bindings/soc/fsl/fsl,layerscape-scfg.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-scfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape Supplemental Configuration Unit + +maintainers: + - Shawn Guo + - Li Yang + +description: | + SCFG is the supplemental configuration unit, that provides SoC specific + configuration and status registers for the chip. Such as getting PEX port + status. + +properties: + compatible: + items: + - enum: + - fsl,ls1012a-scfg + - fsl,ls1021a-scfg + - fsl,ls1028a-scfg + - fsl,ls1043a-scfg + - fsl,ls1046a-scfg + - const: syscon + + reg: + maxItems: 1 + + little-endian: true + big-endian: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +patternProperties: + "^interrupt-controller@[a-z0-9]+$": + $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@1570000 { + compatible = "fsl,ls1021a-scfg", "syscon"; + reg = <0x1570000 0x10000>; + }; diff --git a/dts/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml b/dts/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml new file mode 100644 index 0000000000..563e1d0e32 --- /dev/null +++ b/dts/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP HDMI blk-ctrl + +maintainers: + - Lucas Stach + +description: + The i.MX8MP HDMMI blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the display pipeline + peripherals located in the HDMI domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mp-hdmi-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 8 + maxItems: 8 + + power-domain-names: + items: + - const: bus + - const: irqsteer + - const: lcdif + - const: pai + - const: pvi + - const: trng + - const: hdmi-tx + - const: hdmi-tx-phy + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: apb + - const: axi + - const: ref_266m + - const: ref_24m + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + + blk-ctrl@32fc0000 { + compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon"; + reg = <0x32fc0000 0x23c>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_ROOT>, + <&clk IMX8MP_CLK_HDMI_REF_266M>, + <&clk IMX8MP_CLK_HDMI_24M>; + clock-names = "apb", "axi", "ref_266m", "ref_24m"; + power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, + <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, + <&pgc_hdmimix>, <&pgc_hdmi_phy>; + power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng", + "hdmi-tx", "hdmi-tx-phy"; + #power-domain-cells = <1>; + }; diff --git a/dts/Bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml b/dts/Bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml new file mode 100644 index 0000000000..b246d8386b --- /dev/null +++ b/dts/Bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP Media Block Control + +maintainers: + - Paul Elder + +description: + The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level peripheral + providing access to the NoC and ensuring proper power sequencing of the + peripherals within the MEDIAMIX domain. + +properties: + compatible: + items: + - const: fsl,imx8mp-media-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + maxItems: 10 + + power-domain-names: + items: + - const: bus + - const: mipi-dsi1 + - const: mipi-csi1 + - const: lcdif1 + - const: isi + - const: mipi-csi2 + - const: lcdif2 + - const: isp + - const: dwe + - const: mipi-dsi2 + + clocks: + items: + - description: The APB clock + - description: The AXI clock + - description: The pixel clock for the first CSI2 receiver (aclk) + - description: The pixel clock for the second CSI2 receiver (aclk) + - description: The pixel clock for the first LCDIF (pix_clk) + - description: The pixel clock for the second LCDIF (pix_clk) + - description: The core clock for the ISP (clk) + - description: The MIPI-PHY reference clock used by DSI + + clock-names: + items: + - const: apb + - const: axi + - const: cam1 + - const: cam2 + - const: disp1 + - const: disp2 + - const: isp + - const: phy + +required: + - compatible + - reg + - '#power-domain-cells' + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + + media_blk_ctl: blk-ctl@32ec0000 { + compatible = "fsl,imx8mp-media-blk-ctrl", "syscon"; + reg = <0x32ec0000 0x138>; + power-domains = <&mediamix_pd>, <&mipi_phy1_pd>, <&mipi_phy1_pd>, + <&mediamix_pd>, <&mediamix_pd>, <&mipi_phy2_pd>, + <&mediamix_pd>, <&ispdwp_pd>, <&ispdwp_pd>, + <&mipi_phy2_pd>; + power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", "lcdif1", "isi", + "mipi-csi2", "lcdif2", "isp", "dwe", "mipi-dsi2"; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>; + clock-names = "apb", "axi", "cam1", "cam2", "disp1", "disp2", + "isp", "phy"; + #power-domain-cells = <1>; + }; +... diff --git a/dts/Bindings/soc/intel/intel,hps-copy-engine.yaml b/dts/Bindings/soc/intel/intel,hps-copy-engine.yaml new file mode 100644 index 0000000000..8634865015 --- /dev/null +++ b/dts/Bindings/soc/intel/intel,hps-copy-engine.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2022, Intel Corporation +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel HPS Copy Engine + +maintainers: + - Matthew Gerlach + +description: | + The Intel Hard Processor System (HPS) Copy Engine is an IP block used to copy + a bootable image from host memory to HPS DDR. Additionally, there is a + register the HPS can use to indicate the state of booting the copied image as + well as a keep-a-live indication to the host. + +properties: + compatible: + const: intel,hps-copy-engine + + '#dma-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + bus@80000000 { + compatible = "simple-bus"; + reg = <0x80000000 0x60000000>, + <0xf9000000 0x00100000>; + reg-names = "axi_h2f", "axi_h2f_lw"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>; + + dma-controller@0 { + compatible = "intel,hps-copy-engine"; + reg = <0x00000000 0x00000000 0x00001000>; + #dma-cells = <1>; + }; + }; diff --git a/dts/Bindings/soc/mediatek/pwrap.txt b/dts/Bindings/soc/mediatek/pwrap.txt index 214a346338..0581dbda48 100644 --- a/dts/Bindings/soc/mediatek/pwrap.txt +++ b/dts/Bindings/soc/mediatek/pwrap.txt @@ -31,20 +31,20 @@ Required properties in pwrap device node. "mediatek,mt8195-pwrap" for MT8195 SoCs "mediatek,mt8516-pwrap" for MT8516 SoCs - interrupts: IRQ for pwrap in SOC -- reg-names: Must include the following entries: +- reg-names: "pwrap" is required; "pwrap-bridge" is optional. "pwrap": Main registers base "pwrap-bridge": bridge base (IP Pairing) - reg: Must contain an entry for each entry in reg-names. -- reset-names: Must include the following entries: - "pwrap" - "pwrap-bridge" (IP Pairing) -- resets: Must contain an entry for each entry in reset-names. - clock-names: Must include the following entries: "spi": SPI bus clock "wrap": Main module clock - clocks: Must contain an entry for each entry in clock-names. Optional properities: +- reset-names: Some SoCs include the following entries: + "pwrap" + "pwrap-bridge" (IP Pairing) +- resets: Must contain an entry for each entry in reset-names. - pmic: Using either MediaTek PMIC MFD as the child device of pwrap See the following for child node definitions: Documentation/devicetree/bindings/mfd/mt6397.txt diff --git a/dts/Bindings/soc/qcom/qcom,geni-se.yaml b/dts/Bindings/soc/qcom/qcom,geni-se.yaml index 95fcb43675..2bf5293fc9 100644 --- a/dts/Bindings/soc/qcom/qcom,geni-se.yaml +++ b/dts/Bindings/soc/qcom/qcom,geni-se.yaml @@ -7,8 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: GENI Serial Engine QUP Wrapper Controller maintainers: - - Mukesh Savaliya - - Akash Asthana + - Bjorn Andersson description: | Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper @@ -64,116 +63,23 @@ required: - ranges patternProperties: - "^.*@[0-9a-f]+$": - type: object - description: Common properties for GENI Serial Engine based I2C, SPI and - UART controller. - - properties: - reg: - description: GENI Serial Engine register address and length. - maxItems: 1 - - clock-names: - const: se - - clocks: - description: Serial engine core clock needed by the device. - maxItems: 1 - - interconnects: - minItems: 2 - maxItems: 3 - - interconnect-names: - minItems: 2 - items: - - const: qup-core - - const: qup-config - - const: qup-memory - - required: - - reg - - clock-names - - clocks - "spi@[0-9a-f]+$": type: object description: GENI serial engine based SPI controller. SPI in master mode supports up to 50MHz, up to four chip selects, programmable data path from 4 bits to 32 bits and numerous protocol variants. - $ref: /schemas/spi/spi-controller.yaml# - - properties: - compatible: - enum: - - qcom,geni-spi - - interrupts: - maxItems: 1 - - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - required: - - compatible - - interrupts - - "#address-cells" - - "#size-cells" + $ref: /schemas/spi/qcom,spi-geni-qcom.yaml# "i2c@[0-9a-f]+$": type: object description: GENI serial engine based I2C controller. - $ref: /schemas/i2c/i2c-controller.yaml# - - properties: - compatible: - enum: - - qcom,geni-i2c - - interrupts: - maxItems: 1 - - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - clock-frequency: - description: Desired I2C bus clock frequency in Hz. - default: 100000 - - required: - - compatible - - interrupts - - "#address-cells" - - "#size-cells" + $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml# "serial@[0-9a-f]+$": type: object description: GENI Serial Engine based UART Controller. - $ref: /schemas/serial.yaml# - - properties: - compatible: - enum: - - qcom,geni-uart - - qcom,geni-debug-uart - - interrupts: - minItems: 1 - items: - - description: UART core irq - - description: Wakeup irq (RX GPIO) - - required: - - compatible - - interrupts + $ref: /schemas/serial/qcom,serial-geni-qcom.yaml# additionalProperties: false diff --git a/dts/Bindings/soc/qcom/qcom,gsbi.txt b/dts/Bindings/soc/qcom/qcom,gsbi.txt deleted file mode 100644 index fe1855f09d..0000000000 --- a/dts/Bindings/soc/qcom/qcom,gsbi.txt +++ /dev/null @@ -1,87 +0,0 @@ -QCOM GSBI (General Serial Bus Interface) Driver - -The GSBI controller is modeled as a node with zero or more child nodes, each -representing a serial sub-node device that is mux'd as part of the GSBI -configuration settings. The mode setting will govern the input/output mode of -the 4 GSBI IOs. - -Required properties: -- compatible: Should contain "qcom,gsbi-v1.0.0" -- cell-index: Should contain the GSBI index -- reg: Address range for GSBI registers -- clocks: required clock -- clock-names: must contain "iface" entry -- qcom,mode : indicates MUX value for configuration of the serial interface. - Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values. - -Optional properties: -- qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference - dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. -- syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses - dma. - -Required properties if child node exists: -- #address-cells: Must be 1 -- #size-cells: Must be 1 -- ranges: Must be present - -Properties for children: - -A GSBI controller node can contain 0 or more child nodes representing serial -devices. These serial devices can be a QCOM UART, I2C controller, spi -controller, or some combination of aforementioned devices. - -See the following for child node definitions: -Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt -Documentation/devicetree/bindings/spi/qcom,spi-qup.txt -Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt - -Example for APQ8064: - -#include - - gsbi4@16300000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <4>; - reg = <0x16300000 0x100>; - clocks = <&gcc GSBI4_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - qcom,mode = ; - qcom,crci = ; - - syscon-tcsr = <&tcsr>; - - /* child nodes go under here */ - - i2c_qup4: i2c@16380000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x16380000 0x1000>; - interrupts = <0 153 0>; - - clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; - clock-names = "core", "iface"; - - clock-frequency = <200000>; - - #address-cells = <1>; - #size-cells = <0>; - - }; - - uart4: serial@16340000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16340000 0x1000>, - <0x16300000 0x1000>; - interrupts = <0 152 0x0>; - clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; - clock-names = "core", "iface"; - }; - }; - - tcsr: syscon@1a400000 { - compatible = "qcom,apq8064-tcsr", "syscon"; - reg = <0x1a400000 0x100>; - }; diff --git a/dts/Bindings/soc/qcom/qcom,gsbi.yaml b/dts/Bindings/soc/qcom/qcom,gsbi.yaml new file mode 100644 index 0000000000..c33704333e --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,gsbi.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm General Serial Bus Interface (GSBI) + +maintainers: + - Andy Gross + - Bjorn Andersson + - Krzysztof Kozlowski + +description: + The GSBI controller is modeled as a node with zero or more child nodes, each + representing a serial sub-node device that is mux'd as part of the GSBI + configuration settings. The mode setting will govern the input/output mode + of the 4 GSBI IOs. + + A GSBI controller node can contain 0 or more child nodes representing serial + devices. These serial devices can be a QCOM UART, I2C controller, spi + controller, or some combination of aforementioned devices. + +properties: + compatible: + const: qcom,gsbi-v1.0.0 + + '#address-cells': + const: 1 + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The GSBI index. + + clocks: + maxItems: 1 + + clock-names: + const: iface + + qcom,crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + CRCI MUX value for QUP CRCI ports. Please reference + include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. + + qcom,mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + MUX value for configuration of the serial interface. Please reference + include/dt-bindings/soc/qcom,gsbi.h for valid mux values. + + '#size-cells': + const: 1 + + syscon-tcsr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle of TCSR syscon node.Required if child uses dma. + + ranges: true + + reg: + maxItems: 1 + +patternProperties: + "spi@[0-9a-f]+$": + type: object + $ref: /schemas/spi/qcom,spi-qup.yaml# + + "i2c@[0-9a-f]+$": + type: object + $ref: /schemas/i2c/qcom,i2c-qup.yaml# + + "serial@[0-9a-f]+$": + type: object + $ref: /schemas/serial/qcom,msm-uartdm.yaml# + +required: + - compatible + - cell-index + - clocks + - clock-names + - qcom,mode + - reg + +additionalProperties: false + +examples: + - | + #include + #include + #include + + gsbi@12440000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + cell-index = <1>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + qcom,mode = ; + + serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x100>, + <0x12400000 0x03>; + interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + }; + + i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_pins_sleep>; + pinctrl-names = "default", "sleep"; + interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; /* UART chosen */ + }; + }; diff --git a/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml b/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml new file mode 100644 index 0000000000..f5ecf4a8c3 --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml @@ -0,0 +1,272 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMH RSC + +maintainers: + - Bjorn Andersson + +description: | + Resource Power Manager Hardened (RPMH) is the mechanism for communicating + with the hardened resource accelerators on Qualcomm SoCs. Requests to the + resources can be written to the Trigger Command Set (TCS) registers and + using a (addr, val) pair and triggered. Messages in the TCS are then sent in + sequence over an internal bus. + + The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity + (Resource State Coordinator a.k.a RSC) that can handle multiple sleep and + active/wake resource requests. Multiple such DRVs can exist in a SoC and can + be written to from Linux. The structure of each DRV follows the same template + with a few variations that are captured by the properties here. + + A TCS may be triggered from Linux or triggered by the F/W after all the CPUs + have powered off to facilitate idle power saving. TCS could be classified as:: + ACTIVE - Triggered by Linux + SLEEP - Triggered by F/W + WAKE - Triggered by F/W + CONTROL - Triggered by F/W + See also:: + + The order in which they are described in the DT, should match the hardware + configuration. + + Requests can be made for the state of a resource, when the subsystem is + active or idle. When all subsystems like Modem, GPU, CPU are idle, the + resource state will be an aggregate of the sleep votes from each of those + subsystems. Clients may request a sleep value for their shared resources in + addition to the active mode requests. + + Drivers that want to use the RSC to communicate with RPMH must specify their + bindings as child nodes of the RSC controllers they wish to communicate with. + +properties: + compatible: + const: qcom,rpmh-rsc + + interrupts: + minItems: 1 + maxItems: 4 + description: + The interrupt that trips when a message complete/response is received for + this DRV from the accelerators. + Number of interrupts must match number of DRV blocks. + + label: + description: + Name for the RSC. The name would be used in trace logs. + + qcom,drv-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The ID of the DRV in the RSC block that will be used by this controller. + + qcom,tcs-config: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + - items: + - description: TCS type + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS + - items: + - description: TCS type + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS + - items: + - description: TCS type + enum: [ 0, 1, 2, 3] + - description: Numbe r of TCS + - items: + - description: TCS type + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS + description: | + The tuple defining the configuration of TCS. Must have two cells which + describe each TCS type. The order of the TCS must match the hardware + configuration. + Cell 1 (TCS Type):: TCS types to be specified:: + - ACTIVE_TCS + - SLEEP_TCS + - WAKE_TCS + - CONTROL_TCS + Cell 2 (Number of TCS):: + + qcom,tcs-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The offset of the TCS blocks. + + reg: + minItems: 1 + maxItems: 4 + + reg-names: + minItems: 1 + items: + - const: drv-0 + - const: drv-1 + - const: drv-2 + - const: drv-3 + + bcm-voter: + $ref: /schemas/interconnect/qcom,bcm-voter.yaml# + + clock-controller: + $ref: /schemas/clock/qcom,rpmhcc.yaml# + + power-controller: + $ref: /schemas/power/qcom,rpmpd.yaml# + +patternProperties: + '-regulators$': + $ref: /schemas/regulator/qcom,rpmh-regulator.yaml# + +required: + - compatible + - interrupts + - qcom,drv-id + - qcom,tcs-config + - qcom,tcs-offset + - reg + - reg-names + +additionalProperties: false + +examples: + - | + // For a TCS whose RSC base address is 0x179C0000 and is at a DRV id of + // 2, the register offsets for DRV2 start at 0D00, the register + // calculations are like this:: + // DRV0: 0x179C0000 + // DRV2: 0x179C0000 + 0x10000 = 0x179D0000 + // DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000 + // TCS-OFFSET: 0xD00 + #include + #include + + rsc@179c0000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x179c0000 0x10000>, + <0x179d0000 0x10000>, + <0x179e0000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , + , + , + ; + }; + + - | + // For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the + // register offsets for DRV0 start at 01C00, the register calculations are + // like this:: + // DRV0: 0xAF20000 + // TCS-OFFSET: 0x1C00 + #include + #include + + rsc@af20000 { + compatible = "qcom,rpmh-rsc"; + reg = <0xaf20000 0x10000>; + reg-names = "drv-0"; + interrupts = ; + label = "disp_rsc"; + qcom,tcs-offset = <0x1c00>; + qcom,drv-id = <0>; + qcom,tcs-config = , + , + , + ; + }; + + - | + #include + #include + #include + + rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x18200000 0x10000>, + <0x18210000 0x10000>, + <0x18220000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , + , + , + ; + + clock-controller { + compatible = "qcom,sm8350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + power-controller { + compatible = "qcom,sm8350-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + + bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; diff --git a/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml b/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml index b32457c2fc..f0f1bf06ae 100644 --- a/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml @@ -12,7 +12,7 @@ description: | to vote for state of the system resources, such as clocks, regulators and bus frequencies. - The SMD information for the RPM edge should be filled out. See qcom,smd.txt + The SMD information for the RPM edge should be filled out. See qcom,smd.yaml for the required edge properties. All SMD related properties will reside within the RPM node itself. @@ -25,7 +25,8 @@ description: | rpm_requests. maintainers: - - Kathiravan T + - Andy Gross + - Bjorn Andersson properties: compatible: @@ -34,6 +35,7 @@ properties: - qcom,rpm-ipq6018 - qcom,rpm-msm8226 - qcom,rpm-msm8916 + - qcom,rpm-msm8936 - qcom,rpm-msm8953 - qcom,rpm-msm8974 - qcom,rpm-msm8976 @@ -45,6 +47,10 @@ properties: - qcom,rpm-qcm2290 - qcom,rpm-qcs404 + clock-controller: + $ref: /schemas/clock/qcom,rpmcc.yaml# + unevaluatedProperties: false + qcom,smd-channels: $ref: /schemas/types.yaml#/definitions/string-array description: Channel name used for the RPM communication @@ -82,7 +88,7 @@ examples: qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm_requests { + rpm-requests { compatible = "qcom,rpm-msm8974"; qcom,smd-channels = "rpm_requests"; diff --git a/dts/Bindings/soc/qcom/qcom,smd.txt b/dts/Bindings/soc/qcom/qcom,smd.txt deleted file mode 100644 index 234ae22565..0000000000 --- a/dts/Bindings/soc/qcom/qcom,smd.txt +++ /dev/null @@ -1,98 +0,0 @@ -Qualcomm Shared Memory Driver (SMD) binding - -This binding describes the Qualcomm Shared Memory Driver, a fifo based -communication channel for sending data between the various subsystems in -Qualcomm platforms. - -- compatible: - Usage: required - Value type: - Definition: must be "qcom,smd" - -= EDGES - -Each subnode of the SMD node represents a remote subsystem or a remote -processor of some sort - or in SMD language an "edge". The name of the edges -are not important. -The edge is described by the following properties: - -- interrupts: - Usage: required - Value type: - Definition: should specify the IRQ used by the remote processor to - signal this processor about communication related updates - -- mboxes: - Usage: required - Value type: - Definition: reference to the associated doorbell in APCS, as described - in mailbox/mailbox.txt - -- qcom,ipc: - Usage: required, unless mboxes is specified - Value type: - Definition: three entries specifying the outgoing ipc bit used for - signaling the remote processor: - - phandle to a syscon node representing the apcs registers - - u32 representing offset to the register within the syscon - - u32 representing the ipc bit within the register - -- qcom,smd-edge: - Usage: required - Value type: - Definition: the identifier of the remote processor in the smd channel - allocation table - -- qcom,remote-pid: - Usage: optional - Value type: - Definition: the identifier for the remote processor as known by the rest - of the system. - -- label: - Usage: optional - Value type: - Definition: name of the edge, used for debugging and identification - purposes. The node name will be used if this is not - present. - -= SMD DEVICES - -In turn, subnodes of the "edges" represent devices tied to SMD channels on that -"edge". The names of the devices are not important. The properties of these -nodes are defined by the individual bindings for the SMD devices - but must -contain the following property: - -- qcom,smd-channels: - Usage: required - Value type: - Definition: a list of channels tied to this device, used for matching - the device to channels - -= EXAMPLE - -The following example represents a smd node, with one edge representing the -"rpm" subsystem. For the "rpm" subsystem we have a device tied to the -"rpm_request" channel. - - apcs: syscon@f9011000 { - compatible = "syscon"; - reg = <0xf9011000 0x1000>; - }; - - smd { - compatible = "qcom,smd"; - - rpm { - interrupts = <0 168 1>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - - rpm_requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; - - ... - }; - }; - }; diff --git a/dts/Bindings/soc/qcom/qcom,smd.yaml b/dts/Bindings/soc/qcom/qcom,smd.yaml new file mode 100644 index 0000000000..bca07bb13e --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,smd.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory Driver + +maintainers: + - Andy Gross + - Bjorn Andersson + - Krzysztof Kozlowski + +description: + The Qualcomm Shared Memory Driver is a FIFO based communication channel for + sending data between the various subsystems in Qualcomm platforms. + +properties: + compatible: + const: qcom,smd + +patternProperties: + "^.*-edge|rpm$": + type: object + description: + Each subnode of the SMD node represents a remote subsystem or a remote + processor of some sort - or in SMD language an "edge". The name of the + edges are not important. + + properties: + interrupts: + maxItems: 1 + + label: + $ref: /schemas/types.yaml#/definitions/string + description: + Name of the edge, used for debugging and identification purposes. The + node name will be used if this is not present. + + mboxes: + maxItems: 1 + description: + Reference to the mailbox representing the outgoing doorbell in APCS for + this client. + + qcom,ipc: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the + remote processor. + + qcom,smd-edge: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the remote processor in the smd channel allocation + table. + + qcom,remote-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier for the remote processor as known by the rest of the + system. + + rpm-requests: + type: object + description: + In turn, subnodes of the "edges" represent devices tied to SMD + channels on that "edge". The names of the devices are not + important. The properties of these nodes are defined by the + individual bindings for the SMD devices. + + properties: + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string-array + minItems: 1 + maxItems: 32 + description: + A list of channels tied to this device, used for matching the + device to channels. + + required: + - compatible + - qcom,smd-channels + + additionalProperties: true + + required: + - interrupts + - qcom,smd-edge + + oneOf: + - required: + - mboxes + - required: + - qcom,ipc + + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + # The following example represents a smd node, with one edge representing the + # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the + # "rpm_request" channel. + - | + #include + + shared-memory { + compatible = "qcom,smd"; + + rpm { + interrupts = ; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm-requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + }; + }; + }; diff --git a/dts/Bindings/soc/qcom/qcom,smp2p.txt b/dts/Bindings/soc/qcom/qcom,smp2p.txt deleted file mode 100644 index 49e1d72d36..0000000000 --- a/dts/Bindings/soc/qcom/qcom,smp2p.txt +++ /dev/null @@ -1,110 +0,0 @@ -Qualcomm Shared Memory Point 2 Point binding - -The Shared Memory Point to Point (SMP2P) protocol facilitates communication of -a single 32-bit value between two processors. Each value has a single writer -(the local side) and a single reader (the remote side). Values are uniquely -identified in the system by the directed edge (local processor ID to remote -processor ID) and a string identifier. - -- compatible: - Usage: required - Value type: - Definition: must be one of: - "qcom,smp2p" - -- interrupts: - Usage: required - Value type: - Definition: one entry specifying the smp2p notification interrupt - -- mboxes: - Usage: required - Value type: - Definition: reference to the associated doorbell in APCS, as described - in mailbox/mailbox.txt - -- qcom,ipc: - Usage: required, unless mboxes is specified - Value type: - Definition: three entries specifying the outgoing ipc bit used for - signaling the remote end of the smp2p edge: - - phandle to a syscon node representing the apcs registers - - u32 representing offset to the register within the syscon - - u32 representing the ipc bit within the register - -- qcom,smem: - Usage: required - Value type: - Definition: two identifiers of the inbound and outbound smem items used - for this edge - -- qcom,local-pid: - Usage: required - Value type: - Definition: specifies the identifier of the local endpoint of this edge - -- qcom,remote-pid: - Usage: required - Value type: - Definition: specifies the identifier of the remote endpoint of this edge - -= SUBNODES -Each SMP2P pair contain a set of inbound and outbound entries, these are -described in subnodes of the smp2p device node. The node names are not -important. - -- qcom,entry-name: - Usage: required - Value type: - Definition: specifies the name of this entry, for inbound entries this - will be used to match against the remotely allocated entry - and for outbound entries this name is used for allocating - entries - -- interrupt-controller: - Usage: required for incoming entries - Value type: - Definition: marks the entry as inbound; the node should be specified - as a two cell interrupt-controller as defined in - "../interrupt-controller/interrupts.txt" - If not specified this node will denote the outgoing entry - -- #interrupt-cells: - Usage: required for incoming entries - Value type: - Definition: must be 2 - denoting the bit in the entry and IRQ flags - -- #qcom,smem-state-cells: - Usage: required for outgoing entries - Value type: - Definition: must be 1 - denoting the bit in the entry - -= EXAMPLE -The following example shows the SMP2P setup with the wireless processor, -defined from the 8974 apps processor's point-of-view. It encompasses one -inbound and one outbound entry: - -wcnss-smp2p { - compatible = "qcom,smp2p"; - qcom,smem = <431>, <451>; - - interrupts = <0 143 1>; - - qcom,ipc = <&apcs 8 18>; - - qcom,local-pid = <0>; - qcom,remote-pid = <4>; - - wcnss_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - - #qcom,smem-state-cells = <1>; - }; - - wcnss_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - - interrupt-controller; - #interrupt-cells = <2>; - }; -}; diff --git a/dts/Bindings/soc/qcom/qcom,smp2p.yaml b/dts/Bindings/soc/qcom/qcom,smp2p.yaml new file mode 100644 index 0000000000..795bd8cd41 --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,smp2p.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smp2p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory Point 2 Point + +maintainers: + - Andy Gross + - Bjorn Andersson + - Krzysztof Kozlowski + +description: + The Shared Memory Point to Point (SMP2P) protocol facilitates communication + of a single 32-bit value between two processors. Each value has a single + writer (the local side) and a single reader (the remote side). Values are + uniquely identified in the system by the directed edge (local processor ID to + remote processor ID) and a string identifier. + +properties: + compatible: + const: qcom,smp2p + + interrupts: + maxItems: 1 + + mboxes: + maxItems: 1 + description: + Reference to the mailbox representing the outgoing doorbell in APCS for + this client. + + qcom,ipc: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the + remote end of the smp2p edge. + + qcom,local-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the local endpoint of this edge. + + qcom,remote-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the remote endpoint of this edge. + + qcom,smem: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + maxItems: 2 + description: + Two identifiers of the inbound and outbound smem items used for this edge. + +patternProperties: + "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap$": + type: object + description: + Each SMP2P pair contain a set of inbound and outbound entries, these are + described in subnodes of the smp2p device node. The node names are not + important. + + properties: + interrupt-controller: + description: + Marks the entry as inbound; the node should be specified as a two + cell interrupt-controller. If not specified this node will denote + the outgoing entry. + + '#interrupt-cells': + const: 2 + + qcom,entry-name: + $ref: /schemas/types.yaml#/definitions/string + description: + The name of this entry, for inbound entries this will be used to + match against the remotely allocated entry and for outbound entries + this name is used for allocating entries. + + '#qcom,smem-state-cells': + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + description: + Required for outgoing entries. + + required: + - qcom,entry-name + + oneOf: + - required: + - interrupt-controller + - '#interrupt-cells' + - required: + - '#qcom,smem-state-cells' + + additionalProperties: false + +required: + - compatible + - interrupts + - qcom,local-pid + - qcom,remote-pid + - qcom,smem + +oneOf: + - required: + - mboxes + - required: + - qcom,ipc + +additionalProperties: false + +examples: + # The following example shows the SMP2P setup with the wireless processor, + # defined from the 8974 apps processor's point-of-view. It encompasses one + # inbound and one outbound entry. + - | + #include + + shared-memory { + compatible = "qcom,smp2p"; + qcom,smem = <431>, <451>; + interrupts = ; + qcom,ipc = <&apcs 8 18>; + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/dts/Bindings/soc/qcom/qcom,smsm.txt b/dts/Bindings/soc/qcom/qcom,smsm.txt deleted file mode 100644 index 2993b5a97d..0000000000 --- a/dts/Bindings/soc/qcom/qcom,smsm.txt +++ /dev/null @@ -1,104 +0,0 @@ -Qualcomm Shared Memory State Machine - -The Shared Memory State Machine facilitates broadcasting of single bit state -information between the processors in a Qualcomm SoC. Each processor is -assigned 32 bits of state that can be modified. A processor can through a -matrix of bitmaps signal subscription of notifications upon changes to a -certain bit owned by a certain remote processor. - -- compatible: - Usage: required - Value type: - Definition: must be one of: - "qcom,smsm" - -- qcom,ipc-N: - Usage: required - Value type: - Definition: three entries specifying the outgoing ipc bit used for - signaling the N:th remote processor - - phandle to a syscon node representing the apcs registers - - u32 representing offset to the register within the syscon - - u32 representing the ipc bit within the register - -- qcom,local-host: - Usage: optional - Value type: - Definition: identifier of the local processor in the list of hosts, or - in other words specifier of the column in the subscription - matrix representing the local processor - defaults to host 0 - -- #address-cells: - Usage: required - Value type: - Definition: must be 1 - -- #size-cells: - Usage: required - Value type: - Definition: must be 0 - -= SUBNODES -Each processor's state bits are described by a subnode of the smsm device node. -Nodes can either be flagged as an interrupt-controller to denote a remote -processor's state bits or the local processors bits. The node names are not -important. - -- reg: - Usage: required - Value type: - Definition: specifies the offset, in words, of the first bit for this - entry - -- #qcom,smem-state-cells: - Usage: required for local entry - Value type: - Definition: must be 1 - denotes bit number - -- interrupt-controller: - Usage: required for remote entries - Value type: - Definition: marks the entry as a interrupt-controller and the state bits - to belong to a remote processor - -- #interrupt-cells: - Usage: required for remote entries - Value type: - Definition: must be 2 - denotes bit number and IRQ flags - -- interrupts: - Usage: required for remote entries - Value type: - Definition: one entry specifying remote IRQ used by the remote processor - to signal changes of its state bits - - -= EXAMPLE -The following example shows the SMEM setup for controlling properties of the -wireless processor, defined from the 8974 apps processor's point-of-view. It -encompasses one outbound entry and the outgoing interrupt for the wireless -processor. - -smsm { - compatible = "qcom,smsm"; - - #address-cells = <1>; - #size-cells = <0>; - - qcom,ipc-3 = <&apcs 8 19>; - - apps_smsm: apps@0 { - reg = <0>; - - #qcom,smem-state-cells = <1>; - }; - - wcnss_smsm: wcnss@7 { - reg = <7>; - interrupts = <0 144 1>; - - interrupt-controller; - #interrupt-cells = <2>; - }; -}; diff --git a/dts/Bindings/soc/qcom/qcom,smsm.yaml b/dts/Bindings/soc/qcom/qcom,smsm.yaml new file mode 100644 index 0000000000..db67cf0432 --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,smsm.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smsm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory State Machine + +maintainers: + - Andy Gross + - Bjorn Andersson + - Krzysztof Kozlowski + +description: + The Shared Memory State Machine facilitates broadcasting of single bit state + information between the processors in a Qualcomm SoC. Each processor is + assigned 32 bits of state that can be modified. A processor can through a + matrix of bitmaps signal subscription of notifications upon changes to a + certain bit owned by a certain remote processor. + +properties: + compatible: + const: qcom,smsm + + '#address-cells': + const: 1 + + qcom,local-host: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Identifier of the local processor in the list of hosts, or in other words + specifier of the column in the subscription matrix representing the local + processor. + + '#size-cells': + const: 0 + +patternProperties: + "^qcom,ipc-[1-4]$": + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the N:th + remote processor. + + "@[0-9a-f]$": + type: object + description: + Each processor's state bits are described by a subnode of the SMSM device + node. Nodes can either be flagged as an interrupt-controller to denote a + remote processor's state bits or the local processors bits. The node + names are not important. + + properties: + reg: + maxItems: 1 + + interrupt-controller: + description: + Marks the entry as a interrupt-controller and the state bits to + belong to a remote processor. + + '#interrupt-cells': + const: 2 + + interrupts: + maxItems: 1 + description: + One entry specifying remote IRQ used by the remote processor to + signal changes of its state bits. + + '#qcom,smem-state-cells': + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + description: + Required for local entry. Denotes bit number. + + required: + - reg + + oneOf: + - required: + - '#qcom,smem-state-cells' + - required: + - interrupt-controller + - '#interrupt-cells' + - interrupts + + additionalProperties: false + +required: + - compatible + - '#address-cells' + - '#size-cells' + +anyOf: + - required: + - qcom,ipc-1 + - required: + - qcom,ipc-2 + - required: + - qcom,ipc-3 + - required: + - qcom,ipc-4 + +additionalProperties: false + +examples: + # The following example shows the SMEM setup for controlling properties of + # the wireless processor, defined from the 8974 apps processor's + # point-of-view. It encompasses one outbound entry and the outgoing interrupt + # for the wireless processor. + - | + #include + + shared-memory { + compatible = "qcom,smsm"; + #address-cells = <1>; + #size-cells = <0>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + #qcom,smem-state-cells = <1>; + }; + + wcnss_smsm: wcnss@7 { + reg = <7>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/dts/Bindings/soc/qcom/qcom,wcnss.txt b/dts/Bindings/soc/qcom/qcom,wcnss.txt deleted file mode 100644 index 1382b64e13..0000000000 --- a/dts/Bindings/soc/qcom/qcom,wcnss.txt +++ /dev/null @@ -1,131 +0,0 @@ -Qualcomm WCNSS Binding - -This binding describes the Qualcomm WCNSS hardware. It consists of control -block and a BT, WiFi and FM radio block, all using SMD as command channels. - -- compatible: - Usage: required - Value type: - Definition: must be: "qcom,wcnss", - -- qcom,smd-channel: - Usage: required - Value type: - Definition: standard SMD property specifying the SMD channel used for - communication with the WiFi firmware. - Should be "WCNSS_CTRL". - -- qcom,mmio: - Usage: required - Value type: - Definition: reference to a node specifying the wcnss "ccu" and "dxe" - register blocks. The node must be compatible with one of - the following: - "qcom,riva", - "qcom,pronto" - -- firmware-name: - Usage: optional - Value type: - Definition: specifies the relative firmware image path for the WLAN NV - blob. Defaults to "wlan/prima/WCNSS_qcom_wlan_nv.bin" if - not specified. - -= SUBNODES -The subnodes of the wcnss node are optional and describe the individual blocks in -the WCNSS. - -== Bluetooth -The following properties are defined to the bluetooth node: - -- compatible: - Usage: required - Value type: - Definition: must be: - "qcom,wcnss-bt" - -- local-bd-address: - Usage: optional - Value type: - Definition: see Documentation/devicetree/bindings/net/bluetooth.txt - -== WiFi -The following properties are defined to the WiFi node: - -- compatible: - Usage: required - Value type: - Definition: must be one of: - "qcom,wcnss-wlan", - -- interrupts: - Usage: required - Value type: - Definition: should specify the "rx" and "tx" interrupts - -- interrupt-names: - Usage: required - Value type: - Definition: must contain "rx" and "tx" - -- qcom,smem-state: - Usage: required - Value type: - Definition: should reference the tx-enable and tx-rings-empty SMEM states - -- qcom,smem-state-names: - Usage: required - Value type: - Definition: must contain "tx-enable" and "tx-rings-empty" - -= EXAMPLE -The following example represents a SMD node, with one edge representing the -"pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks -described; as found on the 8974 platform. - -smd { - compatible = "qcom,smd"; - - pronto-edge { - interrupts = <0 142 1>; - - qcom,ipc = <&apcs 8 17>; - qcom,smd-edge = <6>; - - wcnss { - compatible = "qcom,wcnss"; - qcom,smd-channels = "WCNSS_CTRL"; - - #address-cells = <1>; - #size-cells = <1>; - - qcom,mmio = <&pronto>; - - bt { - compatible = "qcom,wcnss-bt"; - - /* BD address 00:11:22:33:44:55 */ - local-bd-address = [ 55 44 33 22 11 00 ]; - }; - - wlan { - compatible = "qcom,wcnss-wlan"; - - interrupts = <0 145 0>, <0 146 0>; - interrupt-names = "tx", "rx"; - - qcom,smem-state = <&apps_smsm 10>, <&apps_smsm 9>; - qcom,smem-state-names = "tx-enable", "tx-rings-empty"; - }; - }; - }; -}; - -soc { - pronto: pronto { - compatible = "qcom,pronto"; - - reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; - reg-names = "ccu", "dxe", "pmu"; - }; -}; diff --git a/dts/Bindings/soc/qcom/qcom,wcnss.yaml b/dts/Bindings/soc/qcom/qcom,wcnss.yaml new file mode 100644 index 0000000000..d891ecfb26 --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,wcnss.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,wcnss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WCNSS + +maintainers: + - Andy Gross + - Bjorn Andersson + +description: + The Qualcomm WCNSS hardware consists of control block and a BT, WiFi and FM + radio block, all using SMD as command channels. + +properties: + compatible: + const: qcom,wcnss + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + default: "wlan/prima/WCNSS_qcom_wlan_nv.bin" + description: + Relative firmware image path for the WLAN NV blob. + + qcom,mmio: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Reference to a node specifying the wcnss "ccu" and "dxe" register blocks. + The node must be compatible with one of the following:: + - qcom,riva" + - qcom,pronto" + + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string + const: WCNSS_CTRL + description: + Standard SMD property specifying the SMD channel used for communication + with the WiFi firmware. + + bluetooth: + type: object + additionalProperties: false + properties: + compatible: + const: qcom,wcnss-bt + + local-bd-address: + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 6 + description: + See Documentation/devicetree/bindings/net/bluetooth.txt + + required: + - compatible + + wifi: + additionalProperties: false + type: object + properties: + compatible: + const: qcom,wcnss-wlan + + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: tx + - const: rx + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 2 + description: + Should reference the tx-enable and tx-rings-empty SMEM states. + + qcom,smem-state-names: + $ref: /schemas/types.yaml#/definitions/string-array + items: + - const: tx-enable + - const: tx-rings-empty + description: + Names of SMEM states. + + required: + - compatible + - interrupts + - interrupt-names + - qcom,smem-states + - qcom,smem-state-names + +required: + - compatible + - qcom,mmio + - qcom,smd-channels + +additionalProperties: false + +examples: + - | + #include + + smd-edge { + interrupts = ; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&pronto>; + + bluetooth { + compatible = "qcom,wcnss-bt"; + /* BD address 00:11:22:33:44:55 */ + local-bd-address = [ 55 44 33 22 11 00 ]; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = , + ; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; diff --git a/dts/Bindings/soc/qcom/rpmh-rsc.txt b/dts/Bindings/soc/qcom/rpmh-rsc.txt deleted file mode 100644 index 9b86d1eff2..0000000000 --- a/dts/Bindings/soc/qcom/rpmh-rsc.txt +++ /dev/null @@ -1,137 +0,0 @@ -RPMH RSC: ------------- - -Resource Power Manager Hardened (RPMH) is the mechanism for communicating with -the hardened resource accelerators on Qualcomm SoCs. Requests to the resources -can be written to the Trigger Command Set (TCS) registers and using a (addr, -val) pair and triggered. Messages in the TCS are then sent in sequence over an -internal bus. - -The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity -(Resource State Coordinator a.k.a RSC) that can handle multiple sleep and -active/wake resource requests. Multiple such DRVs can exist in a SoC and can -be written to from Linux. The structure of each DRV follows the same template -with a few variations that are captured by the properties here. - -A TCS may be triggered from Linux or triggered by the F/W after all the CPUs -have powered off to facilitate idle power saving. TCS could be classified as - - - ACTIVE /* Triggered by Linux */ - SLEEP /* Triggered by F/W */ - WAKE /* Triggered by F/W */ - CONTROL /* Triggered by F/W */ - -The order in which they are described in the DT, should match the hardware -configuration. - -Requests can be made for the state of a resource, when the subsystem is active -or idle. When all subsystems like Modem, GPU, CPU are idle, the resource state -will be an aggregate of the sleep votes from each of those subsystems. Clients -may request a sleep value for their shared resources in addition to the active -mode requests. - -Properties: - -- compatible: - Usage: required - Value type: - Definition: Should be "qcom,rpmh-rsc". - -- reg: - Usage: required - Value type: - Definition: The first register specifies the base address of the - DRV(s). The number of DRVs in the dependent on the RSC. - The tcs-offset specifies the start address of the - TCS in the DRVs. - -- reg-names: - Usage: required - Value type: - Definition: Maps the register specified in the reg property. Must be - "drv-0", "drv-1", "drv-2" etc and "tcs-offset". The - -- interrupts: - Usage: required - Value type: - Definition: The interrupt that trips when a message complete/response - is received for this DRV from the accelerators. - -- qcom,drv-id: - Usage: required - Value type: - Definition: The id of the DRV in the RSC block that will be used by - this controller. - -- qcom,tcs-config: - Usage: required - Value type: - Definition: The tuple defining the configuration of TCS. - Must have 2 cells which describe each TCS type. - . - The order of the TCS must match the hardware - configuration. - - Cell #1 (TCS Type): TCS types to be specified - - ACTIVE_TCS - SLEEP_TCS - WAKE_TCS - CONTROL_TCS - - Cell #2 (Number of TCS): - -- label: - Usage: optional - Value type: - Definition: Name for the RSC. The name would be used in trace logs. - -Drivers that want to use the RSC to communicate with RPMH must specify their -bindings as child nodes of the RSC controllers they wish to communicate with. - -Example 1: - -For a TCS whose RSC base address is is 0x179C0000 and is at a DRV id of 2, the -register offsets for DRV2 start at 0D00, the register calculations are like -this - -DRV0: 0x179C0000 -DRV2: 0x179C0000 + 0x10000 = 0x179D0000 -DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000 -TCS-OFFSET: 0xD00 - - apps_rsc: rsc@179c0000 { - label = "apps_rsc"; - compatible = "qcom,rpmh-rsc"; - reg = <0x179c0000 0x10000>, - <0x179d0000 0x10000>, - <0x179e0000 0x10000>; - reg-names = "drv-0", "drv-1", "drv-2"; - interrupts = , - , - ; - qcom,tcs-offset = <0xd00>; - qcom,drv-id = <2>; - qcom,tcs-config = , - , - , - ; - }; - -Example 2: - -For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the -register offsets for DRV0 start at 01C00, the register calculations are like -this - -DRV0: 0xAF20000 -TCS-OFFSET: 0x1C00 - - disp_rsc: rsc@af20000 { - label = "disp_rsc"; - compatible = "qcom,rpmh-rsc"; - reg = <0xaf20000 0x10000>; - reg-names = "drv-0"; - interrupts = ; - qcom,tcs-offset = <0x1c00>; - qcom,drv-id = <0>; - qcom,tcs-config = , - , - , - ; - }; diff --git a/dts/Bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/dts/Bindings/soc/renesas/renesas,rzg2l-sysc.yaml new file mode 100644 index 0000000000..ce2875c893 --- /dev/null +++ b/dts/Bindings/soc/renesas/renesas,rzg2l-sysc.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas RZ/{G2L,V2L} System Controller (SYSC) + +maintainers: + - Geert Uytterhoeven + +description: + The RZ/{G2L,V2L}-alike System Controller (SYSC) performs system control of + the LSI and supports following functions, + - External terminal state capture function + - 34-bit address space access function + - Low power consumption control + - WDT stop control + +properties: + compatible: + enum: + - renesas,r9a07g043-sysc # RZ/G2UL + - renesas,r9a07g044-sysc # RZ/G2{L,LC} + - renesas,r9a07g054-sysc # RZ/V2L + + reg: + maxItems: 1 + + interrupts: + items: + - description: CA55/CM33 Sleep/Software Standby Mode request interrupt + - description: CA55 Software Standby Mode release request interrupt + - description: CM33 Software Standby Mode release request interrupt + - description: CA55 ACE Asynchronous Bridge Master/Slave interface deny request interrupt + + interrupt-names: + items: + - const: lpm_int + - const: ca55stbydone_int + - const: cm33stbyr_int + - const: ca55_deny + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include + + sysc: system-controller@11020000 { + compatible = "renesas,r9a07g044-sysc"; + reg = <0x11020000 0x10000>; + interrupts = , + , + , + ; + interrupt-names = "lpm_int", "ca55stbydone_int", "cm33stbyr_int", + "ca55_deny"; + }; diff --git a/dts/Bindings/soc/rockchip/grf.yaml b/dts/Bindings/soc/rockchip/grf.yaml index b2ba7bed89..75a2b8bb25 100644 --- a/dts/Bindings/soc/rockchip/grf.yaml +++ b/dts/Bindings/soc/rockchip/grf.yaml @@ -15,6 +15,9 @@ properties: - items: - enum: - rockchip,rk3288-sgrf + - rockchip,rk3566-pipe-grf + - rockchip,rk3568-pipe-grf + - rockchip,rk3568-pipe-phy-grf - rockchip,rk3568-usb2phy-grf - rockchip,rv1108-usbgrf - const: syscon diff --git a/dts/Bindings/soc/samsung/exynos-usi.yaml b/dts/Bindings/soc/samsung/exynos-usi.yaml index 0cabb773c3..fde886a8cf 100644 --- a/dts/Bindings/soc/samsung/exynos-usi.yaml +++ b/dts/Bindings/soc/samsung/exynos-usi.yaml @@ -77,7 +77,7 @@ patternProperties: description: Child node describing underlying UART/serial "^spi@[0-9a-f]+$": - type: object + $ref: /schemas/spi/samsung,spi.yaml description: Child node describing underlying SPI required: diff --git a/dts/Bindings/soc/ti/wkup-m3-ipc.yaml b/dts/Bindings/soc/ti/wkup-m3-ipc.yaml new file mode 100644 index 0000000000..0df41c4f60 --- /dev/null +++ b/dts/Bindings/soc/ti/wkup-m3-ipc.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/wkup-m3-ipc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wakeup M3 IPC device + +maintainers: + - Dave Gerlach + - Drew Fustini + +description: |+ + The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor + (commonly referred to as Wakeup M3 or CM3) to help with various low power tasks + that cannot be controlled from the MPU, like suspend/resume and certain deep + C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver + to boot the wkup_m3, it handles communication with the CM3 using IPC registers + present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an + API to allow the SoC PM code to execute specific PM tasks. + + Wkup M3 Device Node + ==================== + A wkup_m3_ipc device node is used to represent the IPC registers within an + SoC. + + Support for VTT Toggle with GPIO pin + ==================================== + On some boards like the AM335x EVM-SK and the AM437x GP EVM, a GPIO pin is + connected to the enable pin on the DDR VTT regulator. This allows the + regulator to be disabled upon suspend and enabled upon resume. Please note + that the GPIO pin must be part of the GPIO0 module as only this GPIO module + is in the wakeup power domain. + + Support for IO Isolation + ======================== + On AM437x SoCs, certain pins can be forced into an alternate state when IO + isolation is activated. Those pins have pad control registers prefixed by + 'CTRL_CONF_' that contain DS0 (e.g. deep sleep) configuration bits that can + override the pin's existing bias (pull-up/pull-down) and value (high/low) when + IO isolation is active. + + Support for I2C PMIC Voltage Scaling + ==================================== + It is possible to pass the name of a binary file to load into the CM3 memory. + The binary data is the I2C sequences for the CM3 to send out to the PMIC + during low power mode entry. + +properties: + compatible: + enum: + - ti,am3352-wkup-m3-ipc # for AM33xx SoCs + - ti,am4372-wkup-m3-ipc # for AM43xx SoCs + + reg: + description: + The IPC register address space to communicate with the Wakeup M3 processor + maxItems: 1 + + interrupts: + description: wkup_m3 interrupt that signals the MPU + maxItems: 1 + + ti,rproc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the wkup_m3 rproc node so the IPC driver can boot it + + mboxes: + description: + phandles used by IPC framework to get correct mbox + channel for communication. Must point to appropriate + mbox_wkupm3 child node. + maxItems: 1 + + firmware-name: + description: + Name of binary file with I2C sequences for PMIC voltage scaling + + ti,vtt-gpio-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: GPIO pin connected to enable pin on VTT regulator + + ti,set-io-isolation: + type: boolean + description: + If this property is present, then the wkup_m3_ipc driver will instruct + the CM3 firmware to activate IO isolation when suspending to deep sleep. + This can be leveraged by a board design to put other devices on the board + into a low power state. + +allOf: + - if: + properties: + compatible: + not: + contains: + const: ti,am4372-wkup-m3-ipc + then: + properties: + ti,set-io-isolation: false + +required: + - compatible + - reg + - interrupts + - ti,rproc + - mboxes + +additionalProperties: false + +examples: + - | + /* Example for AM335x SoC */ + soc { + #address-cells = <1>; + #size-cells = <1>; + + am335x_mailbox: mailbox { + #mbox-cells = <1>; + }; + + wkup_m3_ipc@1324 { + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am335x_mailbox &mbox_wkupm3>; + ti,vtt-gpio-pin = <7>; + firmware-name = "am335x-evm-scale-data.bin"; + }; + }; + + - | + /* + * Example for AM473x SoC: + * On the AM437x-GP-EVM board, gpio5_7 is wired to enable pin of the DDR VTT + * regulator. The 'ddr_vtt_toggle_default' pinmux node configures gpio5_7 + * for pull-up during normal system operation. However, the DS0 (deep sleep) + * state of the pin is configured for pull-down and thus the VTT regulator + * will be disabled to save power when IO isolation is active. Note that + * this method is an alternative to using the 'ti,vtt-gpio-pin' property. + */ + #include + soc { + #address-cells = <1>; + #size-cells = <1>; + + am437x_mailbox: mailbox { + #mbox-cells = <1>; + }; + + am43xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&ddr3_vtt_toggle_default>; + + ddr3_vtt_toggle_default: ddr_vtt_toggle_default { + pinctrl-single,pins = < + 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) + >; + }; + }; + + wkup_m3_ipc@1324 { + compatible = "ti,am4372-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am437x_mailbox &mbox_wkupm3>; + ti,set-io-isolation; + firmware-name = "am43x-evm-scale-data.bin"; + }; + }; + +... diff --git a/dts/Bindings/soc/ti/wkup_m3_ipc.txt b/dts/Bindings/soc/ti/wkup_m3_ipc.txt deleted file mode 100644 index 401550487e..0000000000 --- a/dts/Bindings/soc/ti/wkup_m3_ipc.txt +++ /dev/null @@ -1,57 +0,0 @@ -Wakeup M3 IPC Driver -===================== - -The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor -(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks -that cannot be controlled from the MPU, like suspend/resume and certain deep -C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver -to boot the wkup_m3, it handles communication with the CM3 using IPC registers -present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an -API to allow the SoC PM code to execute specific PM tasks. - -Wkup M3 Device Node: -==================== -A wkup_m3_ipc device node is used to represent the IPC registers within an -SoC. - -Required properties: --------------------- -- compatible: Should be, - "ti,am3352-wkup-m3-ipc" for AM33xx SoCs - "ti,am4372-wkup-m3-ipc" for AM43xx SoCs -- reg: Contains the IPC register address space to communicate - with the Wakeup M3 processor -- interrupts: Contains the interrupt information for the wkup_m3 - interrupt that signals the MPU. -- ti,rproc: phandle to the wkup_m3 rproc node so the IPC driver - can boot it. -- mboxes: phandles used by IPC framework to get correct mbox - channel for communication. Must point to appropriate - mbox_wkupm3 child node. - -Example: --------- -/* AM33xx */ - l4_wkup: l4_wkup@44c00000 { - ... - - scm: scm@210000 { - compatible = "ti,am3-scm", "simple-bus"; - reg = <0x210000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x210000 0x2000>; - - ... - - wkup_m3_ipc: wkup_m3_ipc@1324 { - compatible = "ti,am3352-wkup-m3-ipc"; - reg = <0x1324 0x24>; - interrupts = <78>; - ti,rproc = <&wkup_m3>; - mboxes = <&mailbox &mbox_wkupm3>; - }; - - ... - }; - }; diff --git a/dts/Bindings/sound/adi,adau1372.yaml b/dts/Bindings/sound/adi,adau1372.yaml index 701449311f..59f7c60a14 100644 --- a/dts/Bindings/sound/adi,adau1372.yaml +++ b/dts/Bindings/sound/adi,adau1372.yaml @@ -64,4 +64,3 @@ examples: clock-frequency = <12288000>; }; ... - diff --git a/dts/Bindings/sound/adi,max98396.yaml b/dts/Bindings/sound/adi,max98396.yaml new file mode 100644 index 0000000000..ec4c10c259 --- /dev/null +++ b/dts/Bindings/sound/adi,max98396.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,max98396.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX98396 Speaker Amplifier Device Tree Bindings + +maintainers: + - Ryan Lee + +description: + The MAX98396 is a mono Class-DG speaker amplifier with I/V sense. + The device provides a PCM interface for audio data and a standard + I2C interface for control data communication. + The MAX98397 is a variant of MAX98396 with wide input supply range. + +properties: + compatible: + enum: + - adi,max98396 + - adi,max98397 + reg: + maxItems: 1 + description: I2C address of the device. + + adi,vmon-slot-no: + description: slot number of the voltage sense monitor + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 15 + default: 0 + + adi,imon-slot-no: + description: slot number of the current sense monitor + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 15 + default: 0 + + adi,spkfb-slot-no: + description: slot number of speaker DSP monitor + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 15 + default: 0 + + adi,interleave-mode: + description: + For cases where a single combined channel for the I/V sense data + is not sufficient, the device can also be configured to share + a single data output channel on alternating frames. + In this configuration, the current and voltage data will be frame + interleaved on a single output channel. + type: boolean + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + max98396: amplifier@39 { + compatible = "adi,max98396"; + reg = <0x39>; + adi,vmon-slot-no = <0>; + adi,imon-slot-no = <1>; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/dts/Bindings/sound/amlogic,gx-sound-card.yaml b/dts/Bindings/sound/amlogic,gx-sound-card.yaml index 8b5be4b92f..b4b35edcb4 100644 --- a/dts/Bindings/sound/amlogic,gx-sound-card.yaml +++ b/dts/Bindings/sound/amlogic,gx-sound-card.yaml @@ -112,4 +112,3 @@ examples: }; }; }; - diff --git a/dts/Bindings/sound/arm,pl041.yaml b/dts/Bindings/sound/arm,pl041.yaml new file mode 100644 index 0000000000..7896b8150c --- /dev/null +++ b/dts/Bindings/sound/arm,pl041.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/arm,pl041.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Ltd. PrimeCell PL041 AACI sound interface + +maintainers: + - Andre Przywara + +description: + The Arm PrimeCell Advanced Audio CODEC Interface (AACI) is an AMBA compliant + peripheral that provides communication with an audio CODEC using the AC-link + protocol. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + const: arm,pl041 + required: + - compatible + +properties: + compatible: + items: + - const: arm,pl041 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: APB register access clock + + clock-names: + const: apb_pclk + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + audio-controller@40000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + clocks = <&v2m_clk24mhz>; + clock-names = "apb_pclk"; + }; + +... diff --git a/dts/Bindings/sound/audio-graph-card2.yaml b/dts/Bindings/sound/audio-graph-card2.yaml index f7e94b1e0e..7416067c94 100644 --- a/dts/Bindings/sound/audio-graph-card2.yaml +++ b/dts/Bindings/sound/audio-graph-card2.yaml @@ -24,10 +24,13 @@ properties: connection's sink, the second being the connection's source. $ref: /schemas/types.yaml#/definitions/non-unique-string-array multi: + type: object description: Multi-CPU/Codec node dpcm: + type: object description: DPCM node codec2codec: + type: object description: Codec to Codec node required: diff --git a/dts/Bindings/sound/cirrus,cs35l41.yaml b/dts/Bindings/sound/cirrus,cs35l41.yaml index 3235702ce4..51d815d0c6 100644 --- a/dts/Bindings/sound/cirrus,cs35l41.yaml +++ b/dts/Bindings/sound/cirrus,cs35l41.yaml @@ -75,6 +75,19 @@ properties: maximum: 3 default: 2 + cirrus,boost-type: + description: + Configures the type of Boost being used. + Internal boost requires boost-peak-milliamp, boost-ind-nanohenry and + boost-cap-microfarad. + External Boost must have GPIO1 as GPIO output. GPIO1 will be set high to + enable boost voltage. + 0 = Internal Boost + 1 = External Boost + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1 + cirrus,gpio1-polarity-invert: description: Boolean which specifies whether the GPIO1 @@ -131,9 +144,32 @@ required: - compatible - reg - "#sound-dai-cells" - - cirrus,boost-peak-milliamp - - cirrus,boost-ind-nanohenry - - cirrus,boost-cap-microfarad + +allOf: + - if: + properties: + cirrus,boost-type: + const: 0 + then: + required: + - cirrus,boost-peak-milliamp + - cirrus,boost-ind-nanohenry + - cirrus,boost-cap-microfarad + else: + if: + properties: + cirrus,boost-type: + const: 1 + then: + required: + - cirrus,gpio1-output-enable + - cirrus,gpio1-src-select + properties: + cirrus,boost-peak-milliamp: false + cirrus,boost-ind-nanohenry: false + cirrus,boost-cap-microfarad: false + cirrus,gpio1-src-select: + enum: [1] additionalProperties: false @@ -150,6 +186,8 @@ examples: VA-supply = <&dummy_vreg>; VP-supply = <&dummy_vreg>; reset-gpios = <&gpio 110 0>; + + cirrus,boost-type = <0>; cirrus,boost-peak-milliamp = <4500>; cirrus,boost-ind-nanohenry = <1000>; cirrus,boost-cap-microfarad = <15>; diff --git a/dts/Bindings/sound/cirrus,cs35l45.yaml b/dts/Bindings/sound/cirrus,cs35l45.yaml new file mode 100644 index 0000000000..184a1344ea --- /dev/null +++ b/dts/Bindings/sound/cirrus,cs35l45.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs35l45.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS35L45 Speaker Amplifier + +maintainers: + - Ricardo Rivera-Matos + - Richard Fitzgerald + +description: | + CS35L45 is a Boosted Mono Class D Amplifier with DSP + Speaker Protection and Adaptive Battery Management. + +properties: + compatible: + enum: + - cirrus,cs35l45 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + + reset-gpios: + maxItems: 1 + + vdd-a-supply: + description: voltage regulator phandle for the VDD_A supply + + vdd-batt-supply: + description: voltage regulator phandle for the VDD_BATT supply + + spi-max-frequency: + maximum: 5000000 + + cirrus,asp-sdout-hiz-ctrl: + description: + Audio serial port SDOUT Hi-Z control. Sets the Hi-Z + configuration for SDOUT pin of amplifier. Logical OR of + CS35L45_ASP_TX_HIZ_xxx values. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3 + default: 2 + +required: + - compatible + - reg + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + #include + spi { + #address-cells = <1>; + #size-cells = <0>; + + cs35l45: cs35l45@2 { + #sound-dai-cells = <1>; + compatible = "cirrus,cs35l45"; + reg = <2>; + spi-max-frequency = <5000000>; + vdd-a-supply = <&dummy_vreg>; + vdd-batt-supply = <&dummy_vreg>; + reset-gpios = <&gpio 110 0>; + cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | + CS35L45_ASP_TX_HIZ_DISABLED)>; + }; + }; diff --git a/dts/Bindings/sound/fsl,micfil.txt b/dts/Bindings/sound/fsl,micfil.txt index 53e227b152..1ea05d4996 100644 --- a/dts/Bindings/sound/fsl,micfil.txt +++ b/dts/Bindings/sound/fsl,micfil.txt @@ -6,6 +6,7 @@ microphone bitstream in a configurable output sampling rate. Required properties: - compatible : Compatible list, contains "fsl,imx8mm-micfil" + or "fsl,imx8mp-micfil" - reg : Offset and length of the register set for the device. diff --git a/dts/Bindings/sound/imx-audio-hdmi.yaml b/dts/Bindings/sound/imx-audio-hdmi.yaml index d5474f83ac..e7e7bb65c3 100644 --- a/dts/Bindings/sound/imx-audio-hdmi.yaml +++ b/dts/Bindings/sound/imx-audio-hdmi.yaml @@ -20,9 +20,11 @@ properties: description: User specified audio sound card name audio-cpu: + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of an CPU DAI controller hdmi-out: + type: boolean description: | This is a boolean property. If present, the transmitting function of HDMI will be enabled, indicating there's a physical HDMI out @@ -30,6 +32,7 @@ properties: block, such as an HDMI encoder or display-controller. hdmi-in: + type: boolean description: | This is a boolean property. If present, the receiving function of HDMI will be enabled, indicating there is a physical HDMI in diff --git a/dts/Bindings/sound/maxim,max98390.yaml b/dts/Bindings/sound/maxim,max98390.yaml index fea9a1b661..deaa6886c4 100644 --- a/dts/Bindings/sound/maxim,max98390.yaml +++ b/dts/Bindings/sound/maxim,max98390.yaml @@ -29,6 +29,9 @@ properties: minimum: 1 maximum: 8388607 + reset-gpios: + maxItems: 1 + required: - compatible - reg @@ -37,6 +40,7 @@ additionalProperties: false examples: - | + #include i2c { #address-cells = <1>; #size-cells = <0>; @@ -45,5 +49,6 @@ examples: reg = <0x38>; maxim,temperature_calib = <1024>; maxim,r0_calib = <100232>; + reset-gpios = <&gpio 9 GPIO_ACTIVE_LOW>; }; }; diff --git a/dts/Bindings/sound/maxim,max98520.yaml b/dts/Bindings/sound/maxim,max98520.yaml index b6509cb2c8..3f88c7d61e 100644 --- a/dts/Bindings/sound/maxim,max98520.yaml +++ b/dts/Bindings/sound/maxim,max98520.yaml @@ -33,4 +33,3 @@ examples: reg = <0x38>; }; }; - diff --git a/dts/Bindings/sound/mchp,spdifrx.yaml b/dts/Bindings/sound/mchp,spdifrx.yaml index 4a2129005c..9703111432 100644 --- a/dts/Bindings/sound/mchp,spdifrx.yaml +++ b/dts/Bindings/sound/mchp,spdifrx.yaml @@ -10,7 +10,7 @@ maintainers: - Codrin Ciubotariu description: - The Microchip Sony/Philips Digital Interface Receiver is a serial port + The Microchip Sony/Philips Digital Interface Receiver is a serial port compliant with the IEC-60958 standard. properties: diff --git a/dts/Bindings/sound/mchp,spdiftx.yaml b/dts/Bindings/sound/mchp,spdiftx.yaml index bdfb63387c..d5c022e495 100644 --- a/dts/Bindings/sound/mchp,spdiftx.yaml +++ b/dts/Bindings/sound/mchp,spdiftx.yaml @@ -10,7 +10,7 @@ maintainers: - Codrin Ciubotariu description: - The Microchip Sony/Philips Digital Interface Transmitter is a serial port + The Microchip Sony/Philips Digital Interface Transmitter is a serial port compliant with the IEC-60958 standard. properties: diff --git a/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml index 5a5b765b85..4fa179909c 100644 --- a/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml +++ b/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml @@ -18,6 +18,7 @@ properties: enum: - mediatek,mt8192_mt6359_rt1015_rt5682 - mediatek,mt8192_mt6359_rt1015p_rt5682 + - mediatek,mt8192_mt6359_rt1015p_rt5682s mediatek,platform: $ref: "/schemas/types.yaml#/definitions/phandle" @@ -27,11 +28,33 @@ properties: $ref: "/schemas/types.yaml#/definitions/phandle" description: The phandle of HDMI codec. + headset-codec: + type: object + properties: + sound-dai: + $ref: /schemas/types.yaml#/definitions/phandle + required: + - sound-dai + + speaker-codecs: + type: object + properties: + sound-dai: + minItems: 1 + maxItems: 2 + items: + maxItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle-array + required: + - sound-dai + additionalProperties: false required: - compatible - mediatek,platform + - headset-codec + - speaker-codecs examples: - | @@ -44,6 +67,15 @@ examples: "aud_clk_mosi_on"; pinctrl-0 = <&aud_clk_mosi_off>; pinctrl-1 = <&aud_clk_mosi_on>; + + headset-codec { + sound-dai = <&rt5682>; + }; + + speaker-codecs { + sound-dai = <&rt1015_l>, + <&rt1015_r>; + }; }; ... diff --git a/dts/Bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml b/dts/Bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml deleted file mode 100644 index cf6ad7933e..0000000000 --- a/dts/Bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml +++ /dev/null @@ -1,51 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/mt8195-mt6359-rt1011-rt5682.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Mediatek MT8195 with MT6359, RT1011 and RT5682 ASoC sound card driver - -maintainers: - - Trevor Wu - -description: - This binding describes the MT8195 sound card with RT1011 and RT5682. - -properties: - compatible: - const: mediatek,mt8195_mt6359_rt1011_rt5682 - - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - - mediatek,platform: - $ref: "/schemas/types.yaml#/definitions/phandle" - description: The phandle of MT8195 ASoC platform. - - mediatek,dptx-codec: - $ref: "/schemas/types.yaml#/definitions/phandle" - description: The phandle of MT8195 Display Port Tx codec node. - - mediatek,hdmi-codec: - $ref: "/schemas/types.yaml#/definitions/phandle" - description: The phandle of MT8195 HDMI codec node. - -additionalProperties: false - -required: - - compatible - - mediatek,platform - -examples: - - | - - sound: mt8195-sound { - compatible = "mediatek,mt8195_mt6359_rt1011_rt5682"; - mediatek,platform = <&afe>; - pinctrl-names = "default"; - pinctrl-0 = <&aud_pins_default>; - }; - -... diff --git a/dts/Bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml b/dts/Bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml deleted file mode 100644 index 8f177e02ad..0000000000 --- a/dts/Bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml +++ /dev/null @@ -1,61 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/mt8195-mt6359-rt1019-rt5682.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Mediatek MT8195 with MT6359, RT1019 and RT5682 ASoC sound card driver - -maintainers: - - Trevor Wu - -description: - This binding describes the MT8195 sound card. - -properties: - compatible: - const: mediatek,mt8195_mt6359_rt1019_rt5682 - - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - - mediatek,platform: - $ref: "/schemas/types.yaml#/definitions/phandle" - description: The phandle of MT8195 ASoC platform. - - mediatek,dptx-codec: - $ref: "/schemas/types.yaml#/definitions/phandle" - description: The phandle of MT8195 Display Port Tx codec node. - - mediatek,hdmi-codec: - $ref: "/schemas/types.yaml#/definitions/phandle" - description: The phandle of MT8195 HDMI codec node. - - mediatek,adsp: - $ref: "/schemas/types.yaml#/definitions/phandle" - description: The phandle of MT8195 ADSP platform. - - mediatek,dai-link: - $ref: /schemas/types.yaml#/definitions/string-array - description: - A list of the desired dai-links in the sound card. Each entry is a - name defined in the machine driver. - -additionalProperties: false - -required: - - compatible - - mediatek,platform - -examples: - - | - - sound: mt8195-sound { - compatible = "mediatek,mt8195_mt6359_rt1019_rt5682"; - mediatek,platform = <&afe>; - pinctrl-names = "default"; - pinctrl-0 = <&aud_pins_default>; - }; - -... diff --git a/dts/Bindings/sound/mt8195-mt6359.yaml b/dts/Bindings/sound/mt8195-mt6359.yaml new file mode 100644 index 0000000000..ad3447ff8b --- /dev/null +++ b/dts/Bindings/sound/mt8195-mt6359.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mt8195-mt6359.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT8195 ASoC sound card driver + +maintainers: + - Trevor Wu + +description: + This binding describes the MT8195 sound card. + +properties: + compatible: + enum: + - mediatek,mt8195_mt6359_rt1019_rt5682 + - mediatek,mt8195_mt6359_rt1011_rt5682 + - mediatek,mt8195_mt6359_max98390_rt5682 + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + + mediatek,platform: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of MT8195 ASoC platform. + + mediatek,dptx-codec: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of MT8195 Display Port Tx codec node. + + mediatek,hdmi-codec: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of MT8195 HDMI codec node. + + mediatek,adsp: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of MT8195 ADSP platform. + + mediatek,dai-link: + $ref: /schemas/types.yaml#/definitions/string-array + description: + A list of the desired dai-links in the sound card. Each entry is a + name defined in the machine driver. + +additionalProperties: false + +required: + - compatible + - mediatek,platform + +examples: + - | + + sound: mt8195-sound { + compatible = "mediatek,mt8195_mt6359_rt1019_rt5682"; + mediatek,platform = <&afe>; + pinctrl-names = "default"; + pinctrl-0 = <&aud_pins_default>; + }; + +... diff --git a/dts/Bindings/sound/nvidia,tegra-audio-rt5640.yaml b/dts/Bindings/sound/nvidia,tegra-audio-rt5640.yaml index e768fb0e9a..b1deaf271a 100644 --- a/dts/Bindings/sound/nvidia,tegra-audio-rt5640.yaml +++ b/dts/Bindings/sound/nvidia,tegra-audio-rt5640.yaml @@ -82,4 +82,3 @@ examples: clocks = <&clk 216>, <&clk 217>, <&clk 120>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; - diff --git a/dts/Bindings/sound/nvidia,tegra186-asrc.yaml b/dts/Bindings/sound/nvidia,tegra186-asrc.yaml new file mode 100644 index 0000000000..520d0d063d --- /dev/null +++ b/dts/Bindings/sound/nvidia,tegra186-asrc.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra186-asrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra186 ASRC Device Tree Bindings + +description: | + Asynchronous Sample Rate Converter (ASRC) converts the sampling frequency + of the input signal from one frequency to another. It can handle over a + wide range of sample rate ratios (freq_in/freq_out) from 1:24 to 24:1. + ASRC has two modes of operation. One where ratio can be programmed in SW + and the other where it gets the information from ratio estimator module. + + It supports sample rate conversions in the range of 8 to 192 kHz and + supports 6 streams upto 12 total channels. The input data size can be + 16, 24 and 32 bits. + +maintainers: + - Jon Hunter + - Mohan Kumar + - Sameer Pujar + +allOf: + - $ref: name-prefix.yaml# + +properties: + $nodename: + pattern: "^asrc@[0-9a-f]*$" + + compatible: + oneOf: + - const: nvidia,tegra186-asrc + - items: + - enum: + - nvidia,tegra234-asrc + - nvidia,tegra194-asrc + - const: nvidia,tegra186-asrc + + reg: + maxItems: 1 + + sound-name-prefix: + pattern: "^ASRC[1-9]$" + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + ASRC has seven input ports and six output ports. Accordingly ACIF + (Audio Client Interfaces) port nodes are defined to represent the + ASRC inputs (port 0 to 6) and outputs (port 7 to 12). These are + connected to corresponding ports on AHUB (Audio Hub). Additional + input (port 6) is for receiving ratio information from estimator. + + patternProperties: + '^port@[0-6]': + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: ASRC ACIF input ports + '^port@[7-9]|1[1-2]': + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: ASRC ACIF output ports + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + + asrc@2910000 { + compatible = "nvidia,tegra186-asrc"; + reg = <0x2910000 0x2000>; + sound-name-prefix = "ASRC1"; + }; + +... diff --git a/dts/Bindings/sound/nvidia,tegra210-ahub.yaml b/dts/Bindings/sound/nvidia,tegra210-ahub.yaml index 4727f1e42c..6df6f85803 100644 --- a/dts/Bindings/sound/nvidia,tegra210-ahub.yaml +++ b/dts/Bindings/sound/nvidia,tegra210-ahub.yaml @@ -106,6 +106,10 @@ patternProperties: type: object $ref: nvidia,tegra210-mixer.yaml# + '^asrc@[0-9a-f]+$': + type: object + $ref: nvidia,tegra186-asrc.yaml# + required: - compatible - reg diff --git a/dts/Bindings/sound/qcom,lpass-cpu.yaml b/dts/Bindings/sound/qcom,lpass-cpu.yaml index 2c81efb5fa..e9a533080b 100644 --- a/dts/Bindings/sound/qcom,lpass-cpu.yaml +++ b/dts/Bindings/sound/qcom,lpass-cpu.yaml @@ -38,8 +38,8 @@ properties: maxItems: 7 clock-names: - minItems: 3 - maxItems: 7 + minItems: 1 + maxItems: 10 interrupts: minItems: 2 @@ -62,6 +62,9 @@ properties: power-domains: maxItems: 1 + power-domain-names: + maxItems: 1 + '#sound-dai-cells': const: 1 @@ -192,15 +195,19 @@ allOf: oneOf: - items: #for I2S - const: aon_cc_audio_hm_h + - const: audio_cc_ext_mclk0 - const: core_cc_sysnoc_mport_core + - const: core_cc_ext_if0_ibit - const: core_cc_ext_if1_ibit - items: #for Soundwire - const: aon_cc_audio_hm_h + - const: audio_cc_codec_mem - const: audio_cc_codec_mem0 - const: audio_cc_codec_mem1 - const: audio_cc_codec_mem2 + - const: aon_cc_va_mem0 - items: #for HDMI - - const: aon_cc_audio_hm_h + - const: core_cc_sysnoc_mport_core reg-names: anyOf: @@ -228,6 +235,10 @@ allOf: - const: lpass-irq-hdmi - const: lpass-irq-vaif - const: lpass-irq-rxtxif + power-domain-names: + allOf: + - items: + - const: lcx required: - iommus diff --git a/dts/Bindings/sound/qcom,lpass-rx-macro.yaml b/dts/Bindings/sound/qcom,lpass-rx-macro.yaml index 6127df5836..a6905bcf89 100644 --- a/dts/Bindings/sound/qcom,lpass-rx-macro.yaml +++ b/dts/Bindings/sound/qcom,lpass-rx-macro.yaml @@ -28,12 +28,17 @@ properties: maxItems: 5 clock-names: - items: - - const: mclk - - const: npl - - const: macro - - const: dcodec - - const: fsgen + oneOf: + - items: #for ADSP based platforms + - const: mclk + - const: npl + - const: macro + - const: dcodec + - const: fsgen + - items: #for ADSP bypass based platforms + - const: mclk + - const: npl + - const: fsgen clock-output-names: items: diff --git a/dts/Bindings/sound/qcom,lpass-tx-macro.yaml b/dts/Bindings/sound/qcom,lpass-tx-macro.yaml index 3f0f99cb18..324595a62a 100644 --- a/dts/Bindings/sound/qcom,lpass-tx-macro.yaml +++ b/dts/Bindings/sound/qcom,lpass-tx-macro.yaml @@ -28,12 +28,17 @@ properties: maxItems: 5 clock-names: - items: - - const: mclk - - const: npl - - const: macro - - const: dcodec - - const: fsgen + oneOf: + - items: #for ADSP based platforms + - const: mclk + - const: npl + - const: macro + - const: dcodec + - const: fsgen + - items: #for ADSP bypass based platforms + - const: mclk + - const: npl + - const: fsgen clock-output-names: items: diff --git a/dts/Bindings/sound/qcom,lpass-va-macro.yaml b/dts/Bindings/sound/qcom,lpass-va-macro.yaml index 9868a5ebe2..7b4cc84eda 100644 --- a/dts/Bindings/sound/qcom,lpass-va-macro.yaml +++ b/dts/Bindings/sound/qcom,lpass-va-macro.yaml @@ -28,10 +28,13 @@ properties: maxItems: 3 clock-names: - items: - - const: mclk - - const: core - - const: dcodec + oneOf: + - items: #for ADSP based platforms + - const: mclk + - const: core + - const: dcodec + - items: #for ADSP bypass based platforms + - const: mclk clock-output-names: items: diff --git a/dts/Bindings/sound/qcom,wcd938x.yaml b/dts/Bindings/sound/qcom,wcd938x.yaml index 7bf1a5fffc..51547190f7 100644 --- a/dts/Bindings/sound/qcom,wcd938x.yaml +++ b/dts/Bindings/sound/qcom,wcd938x.yaml @@ -36,6 +36,9 @@ properties: vdd-io-supply: description: A reference to the 1.8V I/O supply + vdd-mic-bias-supply: + description: A reference to the 3.8V mic bias supply + qcom,tx-device: $ref: /schemas/types.yaml#/definitions/phandle-array description: A reference to Soundwire tx device phandle diff --git a/dts/Bindings/sound/realtek,rt1015p.yaml b/dts/Bindings/sound/realtek,rt1015p.yaml index fdb7f295ef..1d73204451 100644 --- a/dts/Bindings/sound/realtek,rt1015p.yaml +++ b/dts/Bindings/sound/realtek,rt1015p.yaml @@ -25,6 +25,9 @@ properties: 0 means shut down; 1 means power on. maxItems: 1 + "#sound-dai-cells": + const: 0 + required: - compatible diff --git a/dts/Bindings/sound/rt5682.txt b/dts/Bindings/sound/rt5682.txt index cd8c53d849..c5f2b8febc 100644 --- a/dts/Bindings/sound/rt5682.txt +++ b/dts/Bindings/sound/rt5682.txt @@ -46,6 +46,8 @@ Optional properties: - realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out. +- #sound-dai-cells: Should be set to '<0>'. + Pins on the device (for linking into audio routes) for RT5682: * DMIC L1 diff --git a/dts/Bindings/sound/samsung,aries-wm8994.yaml b/dts/Bindings/sound/samsung,aries-wm8994.yaml index 97f83eeaf0..a01c4ad929 100644 --- a/dts/Bindings/sound/samsung,aries-wm8994.yaml +++ b/dts/Bindings/sound/samsung,aries-wm8994.yaml @@ -149,4 +149,3 @@ examples: sound-dai = <&wm8994>; }; }; - diff --git a/dts/Bindings/sound/samsung,odroid.yaml b/dts/Bindings/sound/samsung,odroid.yaml index db2513f3e1..7b4e08ddef 100644 --- a/dts/Bindings/sound/samsung,odroid.yaml +++ b/dts/Bindings/sound/samsung,odroid.yaml @@ -92,4 +92,3 @@ examples: sound-dai = <&hdmi>, <&max98090>; }; }; - diff --git a/dts/Bindings/sound/serial-midi.yaml b/dts/Bindings/sound/serial-midi.yaml new file mode 100644 index 0000000000..4afc29376e --- /dev/null +++ b/dts/Bindings/sound/serial-midi.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/serial-midi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Serial MIDI Interface + +maintainers: + - Daniel Kaehn + +description: + Generic MIDI interface using a serial device. This denotes that a serial device is + dedicated to MIDI communication, either to an external MIDI device through a DIN5 + or other connector, or to a known hardwired MIDI controller. This device must be a + child node of a serial node. + + Can only be set to use standard baud rates corresponding to supported rates of the + parent serial device. If the standard MIDI baud of 31.25 kBaud is needed + (as would be the case if interfacing with arbitrary external MIDI devices), + configure the clocks of the parent serial device so that a requested baud of 38.4 kBaud + resuts in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default) + +properties: + compatible: + const: serial-midi + + current-speed: + description: Baudrate to set the serial port to when this MIDI device is opened. + default: 38400 + +required: + - compatible + +additionalProperties: false + +examples: + - | + serial { + midi { + compatible = "serial-midi"; + }; + }; + - | + serial { + midi { + compatible = "serial-midi"; + current-speed = <115200>; + }; + }; diff --git a/dts/Bindings/sound/tas2562.yaml b/dts/Bindings/sound/tas2562.yaml index acd4bbe697..5f7dd5d6cb 100644 --- a/dts/Bindings/sound/tas2562.yaml +++ b/dts/Bindings/sound/tas2562.yaml @@ -76,4 +76,3 @@ examples: ti,imon-slot-no = <0>; }; }; - diff --git a/dts/Bindings/sound/tas2764.yaml b/dts/Bindings/sound/tas2764.yaml deleted file mode 100644 index 5bf8c76ecd..0000000000 --- a/dts/Bindings/sound/tas2764.yaml +++ /dev/null @@ -1,76 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -# Copyright (C) 2020 Texas Instruments Incorporated -%YAML 1.2 ---- -$id: "http://devicetree.org/schemas/sound/tas2764.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" - -title: Texas Instruments TAS2764 Smart PA - -maintainers: - - Dan Murphy - -description: | - The TAS2764 is a mono, digital input Class-D audio amplifier optimized for - efficiently driving high peak power into small loudspeakers. - Integrated speaker voltage and current sense provides for - real time monitoring of loudspeaker behavior. - -properties: - compatible: - enum: - - ti,tas2764 - - reg: - maxItems: 1 - description: | - I2C address of the device can be between 0x38 to 0x45. - - reset-gpios: - maxItems: 1 - description: GPIO used to reset the device. - - shutdown-gpios: - maxItems: 1 - description: GPIO used to control the state of the device. - - interrupts: - maxItems: 1 - - ti,imon-slot-no: - $ref: /schemas/types.yaml#/definitions/uint32 - description: TDM TX current sense time slot. - - ti,vmon-slot-no: - $ref: /schemas/types.yaml#/definitions/uint32 - description: TDM TX voltage sense time slot. - - '#sound-dai-cells': - const: 1 - -required: - - compatible - - reg - -additionalProperties: false - -examples: - - | - #include - i2c0 { - #address-cells = <1>; - #size-cells = <0>; - codec: codec@38 { - compatible = "ti,tas2764"; - reg = <0x38>; - #sound-dai-cells = <1>; - interrupt-parent = <&gpio1>; - interrupts = <14>; - reset-gpios = <&gpio1 15 0>; - shutdown-gpios = <&gpio1 15 0>; - ti,imon-slot-no = <0>; - ti,vmon-slot-no = <2>; - }; - }; - -... diff --git a/dts/Bindings/sound/tas2770.yaml b/dts/Bindings/sound/tas2770.yaml index 027bebf4e8..bc90e72bf7 100644 --- a/dts/Bindings/sound/tas2770.yaml +++ b/dts/Bindings/sound/tas2770.yaml @@ -80,4 +80,3 @@ examples: ti,vmon-slot-no = <2>; }; }; - diff --git a/dts/Bindings/sound/tas27xx.yaml b/dts/Bindings/sound/tas27xx.yaml new file mode 100644 index 0000000000..66a0df8850 --- /dev/null +++ b/dts/Bindings/sound/tas27xx.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020-2022 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/tas27xx.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments TAS2764/TAS2780 Smart PA + +maintainers: + - Shenghao Ding + +description: | + The TAS2764/TAS2780 is a mono, digital input Class-D audio amplifier + optimized for efficiently driving high peak power into small + loudspeakers. Integrated speaker voltage and current sense provides + for real time monitoring of loudspeaker behavior. + +properties: + compatible: + enum: + - ti,tas2764 + - ti,tas2780 + + reg: + maxItems: 1 + description: | + I2C address of the device can be between 0x38 to 0x45. + + reset-gpios: + maxItems: 1 + description: GPIO used to reset the device. + + shutdown-gpios: + maxItems: 1 + description: GPIO used to control the state of the device. + + interrupts: + maxItems: 1 + + ti,imon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX current sense time slot. + + ti,vmon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX voltage sense time slot. + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@38 { + compatible = "ti,tas2764"; + reg = <0x38>; + #sound-dai-cells = <1>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + reset-gpios = <&gpio1 15 0>; + shutdown-gpios = <&gpio1 15 0>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; + }; + +... diff --git a/dts/Bindings/sound/wlf,wm8731.yaml b/dts/Bindings/sound/wlf,wm8731.yaml new file mode 100644 index 0000000000..e7220e8b49 --- /dev/null +++ b/dts/Bindings/sound/wlf,wm8731.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8731.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson Microelectromics WM8731 audio CODEC + +maintainers: + - patches@opensource.cirrus.com + +description: | + Wolfson Microelectronics WM8731 audio CODEC + + Pins on the device (for linking into audio routes): + * LOUT: Left Channel Line Output + * ROUT: Right Channel Line Output + * LHPOUT: Left Channel Headphone Output + * RHPOUT: Right Channel Headphone Output + * LLINEIN: Left Channel Line Input + * RLINEIN: Right Channel Line Input + * MICIN: Microphone Input + +properties: + compatible: + enum: + - wlf,wm8731 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + description: Clock provider for MCLK pin. + maxItems: 1 + + clock-names: + items: + - const: mclk + + AVDD-supply: + description: Analog power supply regulator on the AVDD pin. + + HPVDD-supply: + description: Headphone power supply regulator on the HPVDD pin. + + DBVDD-supply: + description: Digital buffer supply regulator for the DBVDD pin. + + DCVDD-supply: + description: Digital core supply regulator for the DCVDD pin. + + spi-max-frequency: true + +additionalProperties: false + +required: + - reg + - compatible + - AVDD-supply + - HPVDD-supply + - DBVDD-supply + - DCVDD-supply + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + wm8731_i2c: codec@0 { + compatible = "wlf,wm8731"; + reg = <0>; + spi-max-frequency = <12500000>; + + AVDD-supply = <&avdd_reg>; + HPVDD-supply = <&hpvdd_reg>; + DCVDD-supply = <&dcvdd_reg>; + DBVDD-supply = <&dbvdd_reg>; + }; + }; + - | + + i2c { + #address-cells = <1>; + #size-cells = <0>; + wm8731_spi: codec@1b { + compatible = "wlf,wm8731"; + reg = <0x1b>; + + AVDD-supply = <&avdd_reg>; + HPVDD-supply = <&hpvdd_reg>; + DCVDD-supply = <&dcvdd_reg>; + DBVDD-supply = <&dbvdd_reg>; + }; + }; diff --git a/dts/Bindings/sound/wlf,wm8940.yaml b/dts/Bindings/sound/wlf,wm8940.yaml new file mode 100644 index 0000000000..8aadcbeed5 --- /dev/null +++ b/dts/Bindings/sound/wlf,wm8940.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8940.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM8940 Codec Device Tree Bindings + +maintainers: + - patches@opensource.cirrus.com + +properties: + '#sound-dai-cells': + const: 0 + + compatible: + const: wlf,wm8940 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 526000 + +required: + - '#sound-dai-cells' + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + codec@0 { + #sound-dai-cells = <0>; + compatible = "wlf,wm8940"; + reg = <0>; + spi-max-frequency = <500000>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8940"; + reg = <0x1a>; + }; + }; + +... diff --git a/dts/Bindings/sound/wm8731.txt b/dts/Bindings/sound/wm8731.txt deleted file mode 100644 index f660d9bb0e..0000000000 --- a/dts/Bindings/sound/wm8731.txt +++ /dev/null @@ -1,27 +0,0 @@ -WM8731 audio CODEC - -This device supports both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : "wlf,wm8731" - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - -Example: - -wm8731: codec@1a { - compatible = "wlf,wm8731"; - reg = <0x1a>; -}; - -Available audio endpoints for an audio-routing table: - * LOUT: Left Channel Line Output - * ROUT: Right Channel Line Output - * LHPOUT: Left Channel Headphone Output - * RHPOUT: Right Channel Headphone Output - * LLINEIN: Left Channel Line Input - * RLINEIN: Right Channel Line Input - * MICIN: Microphone Input diff --git a/dts/Bindings/soundwire/qcom,sdw.txt b/dts/Bindings/soundwire/qcom,sdw.txt index 51ddbc5093..c85c25779e 100644 --- a/dts/Bindings/soundwire/qcom,sdw.txt +++ b/dts/Bindings/soundwire/qcom,sdw.txt @@ -162,6 +162,18 @@ board specific bus parameters. or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. +- reset: + Usage: optional + Value type: + Definition: Should specify the SoundWire audio CSR reset controller interface, + which is required for SoundWire version 1.6.0 and above. + +- reset-names: + Usage: optional + Value type: + Definition: should be "swr_audio_cgcr" for SoundWire audio CSR reset + controller interface. + Note: More Information on detail of encoding of these fields can be found in MIPI Alliance SoundWire 1.0 Specifications. @@ -180,6 +192,8 @@ soundwire: soundwire@c85 { interrupts = <20 IRQ_TYPE_EDGE_RISING>; clocks = <&wcc>; clock-names = "iface"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; #sound-dai-cells = <1>; qcom,dports-type = <0>; qcom,dout-ports = <6>; diff --git a/dts/Bindings/spi/allwinner,sun6i-a31-spi.yaml b/dts/Bindings/spi/allwinner,sun6i-a31-spi.yaml index 908248260a..ca4c95345a 100644 --- a/dts/Bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/dts/Bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -26,6 +26,7 @@ properties: - allwinner,sun8i-r40-spi - allwinner,sun50i-h6-spi - allwinner,sun50i-h616-spi + - allwinner,suniv-f1c100s-spi - const: allwinner,sun8i-h3-spi reg: diff --git a/dts/Bindings/spi/amlogic,meson-gx-spicc.yaml b/dts/Bindings/spi/amlogic,meson-gx-spicc.yaml index 4d46c49ec3..50de0da42c 100644 --- a/dts/Bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/dts/Bindings/spi/amlogic,meson-gx-spicc.yaml @@ -95,4 +95,3 @@ examples: reg = <0>; }; }; - diff --git a/dts/Bindings/spi/amlogic,meson6-spifc.yaml b/dts/Bindings/spi/amlogic,meson6-spifc.yaml index 54b6f15eca..8a9d526d06 100644 --- a/dts/Bindings/spi/amlogic,meson6-spifc.yaml +++ b/dts/Bindings/spi/amlogic,meson6-spifc.yaml @@ -52,4 +52,3 @@ examples: spi-max-frequency = <40000000>; }; }; - diff --git a/dts/Bindings/spi/aspeed,ast2600-fmc.yaml b/dts/Bindings/spi/aspeed,ast2600-fmc.yaml new file mode 100644 index 0000000000..fa8f4ac209 --- /dev/null +++ b/dts/Bindings/spi/aspeed,ast2600-fmc.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/aspeed,ast2600-fmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed SMC controllers bindings + +maintainers: + - Chin-Ting Kuo + - Cédric Le Goater + +description: | + This binding describes the Aspeed Static Memory Controllers (FMC and + SPI) of the AST2400, AST2500 and AST2600 SOCs. + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + enum: + - aspeed,ast2600-fmc + - aspeed,ast2600-spi + - aspeed,ast2500-fmc + - aspeed,ast2500-spi + - aspeed,ast2400-fmc + - aspeed,ast2400-spi + + reg: + items: + - description: registers + - description: memory mapping + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + spi@1e620000 { + reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-fmc"; + clocks = <&syscon ASPEED_CLK_AHB>; + interrupts = ; + + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + }; + + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + }; + + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + }; + }; diff --git a/dts/Bindings/spi/ingenic,spi.yaml b/dts/Bindings/spi/ingenic,spi.yaml index 5b1c7a2a6a..360f76c226 100644 --- a/dts/Bindings/spi/ingenic,spi.yaml +++ b/dts/Bindings/spi/ingenic,spi.yaml @@ -18,7 +18,10 @@ properties: oneOf: - enum: - ingenic,jz4750-spi + - ingenic,jz4775-spi - ingenic,jz4780-spi + - ingenic,x1000-spi + - ingenic,x2000-spi - items: - enum: - ingenic,jz4760-spi diff --git a/dts/Bindings/spi/mediatek,spi-mt65xx.yaml b/dts/Bindings/spi/mediatek,spi-mt65xx.yaml index 818130b11b..94ef0552bd 100644 --- a/dts/Bindings/spi/mediatek,spi-mt65xx.yaml +++ b/dts/Bindings/spi/mediatek,spi-mt65xx.yaml @@ -53,16 +53,20 @@ properties: maxItems: 1 clocks: + minItems: 3 items: - description: clock used for the parent clock - description: clock used for the muxes clock - description: clock used for the clock gate + - description: clock used for the AHB bus, this clock is optional clock-names: + minItems: 3 items: - const: parent-clk - const: sel-clk - const: spi-clk + - const: hclk mediatek,pad-select: $ref: /schemas/types.yaml#/definitions/uint32-array diff --git a/dts/Bindings/spi/mediatek,spi-mtk-snfi.yaml b/dts/Bindings/spi/mediatek,spi-mtk-snfi.yaml new file mode 100644 index 0000000000..6e6e02c917 --- /dev/null +++ b/dts/Bindings/spi/mediatek,spi-mtk-snfi.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/mediatek,spi-mtk-snfi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SPI-NAND flash controller for MediaTek ARM SoCs + +maintainers: + - Chuanhong Guo + +description: | + The Mediatek SPI-NAND flash controller is an extended version of + the Mediatek NAND flash controller. It can perform standard SPI + instructions with one continuous write and one read for up-to 0xa0 + bytes. It also supports typical SPI-NAND page cache operations + in single, dual or quad IO mode with pipelined ECC encoding/decoding + using the accompanying ECC engine. There should be only one spi + slave device following generic spi bindings. + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + enum: + - mediatek,mt7622-snand + - mediatek,mt7629-snand + + reg: + items: + - description: core registers + + interrupts: + items: + - description: NFI interrupt + + clocks: + items: + - description: clock used for the controller + - description: clock used for the SPI bus + + clock-names: + items: + - const: nfi_clk + - const: pad_clk + + nand-ecc-engine: + description: device-tree node of the accompanying ECC engine. + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - nand-ecc-engine + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + soc { + #address-cells = <2>; + #size-cells = <2>; + snfi: spi@1100d000 { + compatible = "mediatek,mt7622-snand"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = ; + clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>; + clock-names = "nfi_clk", "pad_clk"; + nand-ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + nand-ecc-engine = <&snfi>; + }; + }; + }; diff --git a/dts/Bindings/spi/qcom,spi-geni-qcom.txt b/dts/Bindings/spi/qcom,spi-geni-qcom.txt deleted file mode 100644 index c8c1e913f4..0000000000 --- a/dts/Bindings/spi/qcom,spi-geni-qcom.txt +++ /dev/null @@ -1,39 +0,0 @@ -GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) - -The QUP v3 core is a GENI based AHB slave that provides a common data path -(an output FIFO and an input FIFO) for serial peripheral interface (SPI) -mini-core. - -SPI in master mode supports up to 50MHz, up to four chip selects, programmable -data path from 4 bits to 32 bits and numerous protocol variants. - -Required properties: -- compatible: Must contain "qcom,geni-spi". -- reg: Must contain SPI register location and length. -- interrupts: Must contain SPI controller interrupts. -- clock-names: Must contain "se". -- clocks: Serial engine core clock needed by the device. -- #address-cells: Must be <1> to define a chip select address on - the SPI bus. -- #size-cells: Must be <0>. - -SPI Controller nodes must be child of GENI based Qualcomm Universal -Peripharal. Please refer GENI based QUP wrapper controller node bindings -described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml. - -SPI slave nodes must be children of the SPI master node and conform to SPI bus -binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt. - -Example: - spi0: spi@a84000 { - compatible = "qcom,geni-spi"; - reg = <0xa84000 0x4000>; - interrupts = ; - clock-names = "se"; - clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qup_1_spi_2_active>; - pinctrl-1 = <&qup_1_spi_2_sleep>; - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/dts/Bindings/spi/qcom,spi-geni-qcom.yaml b/dts/Bindings/spi/qcom,spi-geni-qcom.yaml new file mode 100644 index 0000000000..e2c7b934c5 --- /dev/null +++ b/dts/Bindings/spi/qcom,spi-geni-qcom.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/qcom,spi-geni-qcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) + +maintainers: + - Andy Gross + - Bjorn Andersson + - Krzysztof Kozlowski + +description: + The QUP v3 core is a GENI based AHB slave that provides a common data path + (an output FIFO and an input FIFO) for serial peripheral interface (SPI) + mini-core. + + SPI in master mode supports up to 50MHz, up to four chip selects, + programmable data path from 4 bits to 32 bits and numerous protocol variants. + + SPI Controller nodes must be child of GENI based Qualcomm Universal + Peripharal. Please refer GENI based QUP wrapper controller node bindings + described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml. + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + const: qcom,geni-spi + + clocks: + maxItems: 1 + + clock-names: + const: se + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + + interrupts: + maxItems: 1 + + operating-points-v2: true + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + + spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x00880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + }; + + - | + #include + + spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x00884000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/dts/Bindings/spi/qcom,spi-qcom-qspi.yaml b/dts/Bindings/spi/qcom,spi-qcom-qspi.yaml index 5a60fba14b..b622bb7363 100644 --- a/dts/Bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/dts/Bindings/spi/qcom,spi-qcom-qspi.yaml @@ -8,8 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm Quad Serial Peripheral Interface (QSPI) maintainers: - - Mukesh Savaliya - - Akash Asthana + - Bjorn Andersson description: The QSPI controller allows SPI protocol communication in single, dual, or quad wire transmission modes for read/write access to slaves such @@ -49,6 +48,7 @@ properties: maxItems: 2 interconnect-names: + minItems: 1 items: - const: qspi-config - const: qspi-memory diff --git a/dts/Bindings/spi/qcom,spi-qup.txt b/dts/Bindings/spi/qcom,spi-qup.txt deleted file mode 100644 index 5c090771c0..0000000000 --- a/dts/Bindings/spi/qcom,spi-qup.txt +++ /dev/null @@ -1,103 +0,0 @@ -Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) - -The QUP core is an AHB slave that provides a common data path (an output FIFO -and an input FIFO) for serial peripheral interface (SPI) mini-core. - -SPI in master mode supports up to 50MHz, up to four chip selects, programmable -data path from 4 bits to 32 bits and numerous protocol variants. - -Required properties: -- compatible: Should contain: - "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064. - "qcom,spi-qup-v2.1.1" for 8974 and later - "qcom,spi-qup-v2.2.1" for 8974 v2 and later. - -- reg: Should contain base register location and length -- interrupts: Interrupt number used by this controller - -- clocks: Should contain the core clock and the AHB clock. -- clock-names: Should be "core" for the core clock and "iface" for the - AHB clock. - -- #address-cells: Number of cells required to define a chip select - address on the SPI bus. Should be set to 1. -- #size-cells: Should be zero. - -Optional properties: -- spi-max-frequency: Specifies maximum SPI clock frequency, - Units - Hz. Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt -- num-cs: total number of chipselects -- cs-gpios: should specify GPIOs used for chipselects. - The gpios will be referred to as reg = in the SPI child - nodes. If unspecified, a single SPI device without a chip - select can be used. - -- dmas: Two DMA channel specifiers following the convention outlined - in bindings/dma/dma.txt -- dma-names: Names for the dma channels, if present. There must be at - least one channel named "tx" for transmit and named "rx" for - receive. - -SPI slave nodes must be children of the SPI master node and can contain -properties described in Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - - spi_8: spi@f9964000 { /* BLSP2 QUP2 */ - - compatible = "qcom,spi-qup-v2"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xf9964000 0x1000>; - interrupts = <0 102 0>; - spi-max-frequency = <19200000>; - - clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - - dmas = <&blsp1_bam 13>, <&blsp1_bam 12>; - dma-names = "rx", "tx"; - - pinctrl-names = "default"; - pinctrl-0 = <&spi8_default>; - - device@0 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <19200000>; - spi-cpol; - }; - - device@1 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <1>; /* Chip select 1 */ - spi-max-frequency = <9600000>; - spi-cpha; - }; - - device@2 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <2>; /* Chip select 2 */ - spi-max-frequency = <19200000>; - spi-cpol; - spi-cpha; - }; - - device@3 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <3>; /* Chip select 3 */ - spi-max-frequency = <19200000>; - spi-cpol; - spi-cpha; - spi-cs-high; - }; - }; diff --git a/dts/Bindings/spi/qcom,spi-qup.yaml b/dts/Bindings/spi/qcom,spi-qup.yaml new file mode 100644 index 0000000000..93f14dd01a --- /dev/null +++ b/dts/Bindings/spi/qcom,spi-qup.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/qcom,spi-qup.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) + +maintainers: + - Andy Gross + - Bjorn Andersson + - Krzysztof Kozlowski + +description: + The QUP core is an AHB slave that provides a common data path (an output FIFO + and an input FIFO) for serial peripheral interface (SPI) mini-core. + + SPI in master mode supports up to 50MHz, up to four chip selects, + programmable data path from 4 bits to 32 bits and numerous protocol variants. + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + enum: + - qcom,spi-qup-v1.1.1 # for 8660, 8960 and 8064 + - qcom,spi-qup-v2.1.1 # for 8974 and later + - qcom,spi-qup-v2.2.1 # for 8974 v2 and later + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: iface + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include + #include + + spi@7575000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07575000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_spi1_default>; + pinctrl-1 = <&blsp1_spi1_sleep>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/dts/Bindings/spi/renesas,hspi.yaml b/dts/Bindings/spi/renesas,hspi.yaml index c0eccf7030..bab5d4b7fc 100644 --- a/dts/Bindings/spi/renesas,hspi.yaml +++ b/dts/Bindings/spi/renesas,hspi.yaml @@ -56,4 +56,3 @@ examples: #address-cells = <1>; #size-cells = <0>; }; - diff --git a/dts/Bindings/spi/renesas,rspi.yaml b/dts/Bindings/spi/renesas,rspi.yaml index 2c3c6bd6ec..f45d3b75d6 100644 --- a/dts/Bindings/spi/renesas,rspi.yaml +++ b/dts/Bindings/spi/renesas,rspi.yaml @@ -21,6 +21,7 @@ properties: - enum: - renesas,rspi-r7s72100 # RZ/A1H - renesas,rspi-r7s9210 # RZ/A2 + - renesas,r9a07g043-rspi # RZ/G2UL - renesas,r9a07g044-rspi # RZ/G2{L,LC} - renesas,r9a07g054-rspi # RZ/V2L - const: renesas,rspi-rz @@ -124,6 +125,7 @@ allOf: contains: enum: - renesas,qspi + - renesas,r9a07g043-rspi - renesas,r9a07g044-rspi - renesas,r9a07g054-rspi then: diff --git a/dts/Bindings/spi/spi-davinci.txt b/dts/Bindings/spi/spi-davinci.txt index 200c7fc7b0..f012888656 100644 --- a/dts/Bindings/spi/spi-davinci.txt +++ b/dts/Bindings/spi/spi-davinci.txt @@ -78,7 +78,7 @@ spi0:spi@20bf0000 { interrupts = <338>; clocks = <&clkspi>; - flash: n25q032@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32"; diff --git a/dts/Bindings/spi/spi-pl022.yaml b/dts/Bindings/spi/spi-pl022.yaml index bda45ff3d2..0e382119c6 100644 --- a/dts/Bindings/spi/spi-pl022.yaml +++ b/dts/Bindings/spi/spi-pl022.yaml @@ -143,7 +143,7 @@ examples: <&dma_controller 24 0>; dma-names = "rx", "tx"; - m25p80@1 { + flash@1 { compatible = "st,m25p80"; reg = <1>; spi-max-frequency = <12000000>; diff --git a/dts/Bindings/spmi/qcom,spmi-pmic-arb.txt b/dts/Bindings/spmi/qcom,spmi-pmic-arb.txt deleted file mode 100644 index ca645e21fe..0000000000 --- a/dts/Bindings/spmi/qcom,spmi-pmic-arb.txt +++ /dev/null @@ -1,65 +0,0 @@ -Qualcomm SPMI Controller (PMIC Arbiter) - -The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI -controller with wrapping arbitration logic to allow for multiple on-chip -devices to control a single SPMI master. - -The PMIC Arbiter can also act as an interrupt controller, providing interrupts -to slave devices. - -See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI -controller binding requirements for child nodes. - -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for -generic interrupt controller binding documentation. - -Required properties: -- compatible : should be "qcom,spmi-pmic-arb". -- reg-names : must contain: - "core" - core registers - "intr" - interrupt controller registers - "cnfg" - configuration registers - Registers used only for V2 PMIC Arbiter: - "chnls" - tx-channel per virtual slave registers. - "obsrvr" - rx-channel (called observer) per virtual slave registers. - -- reg : address + size pairs describing the PMIC arb register sets; order must - correspond with the order of entries in reg-names -- #address-cells : must be set to 2 -- #size-cells : must be set to 0 -- qcom,ee : indicates the active Execution Environment identifier (0-5) -- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5) -- interrupts : interrupt list for the PMIC Arb controller, must contain a - single interrupt entry for the peripheral interrupt -- interrupt-names : corresponding interrupt names for the interrupts - listed in the 'interrupts' property, must contain: - "periph_irq" - summary interrupt for PMIC peripherals -- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller -- #interrupt-cells : must be set to 4. Interrupts are specified as a 4-tuple: - cell 1: slave ID for the requested interrupt (0-15) - cell 2: peripheral ID for requested interrupt (0-255) - cell 3: the requested peripheral interrupt (0-7) - cell 4: interrupt flags indicating level-sense information, as defined in - dt-bindings/interrupt-controller/irq.h - -Example: - - spmi { - compatible = "qcom,spmi-pmic-arb"; - reg-names = "core", "intr", "cnfg"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - - interrupt-names = "periph_irq"; - interrupts = <0 190 0>; - - qcom,ee = <0>; - qcom,channel = <0>; - - #address-cells = <2>; - #size-cells = <0>; - - interrupt-controller; - #interrupt-cells = <4>; - }; diff --git a/dts/Bindings/spmi/qcom,spmi-pmic-arb.yaml b/dts/Bindings/spmi/qcom,spmi-pmic-arb.yaml new file mode 100644 index 0000000000..fee4f0eb46 --- /dev/null +++ b/dts/Bindings/spmi/qcom,spmi-pmic-arb.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SPMI Controller (PMIC Arbiter) + +maintainers: + - Stephen Boyd + +description: | + The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI + controller with wrapping arbitration logic to allow for multiple on-chip + devices to control a single SPMI master. + + The PMIC Arbiter can also act as an interrupt controller, providing interrupts + to slave devices. + +allOf: + - $ref: spmi.yaml + +properties: + compatible: + const: qcom,spmi-pmic-arb + + reg: + oneOf: + - items: # V1 + - description: core registers + - description: interrupt controller registers + - description: configuration registers + - items: # V2 + - description: core registers + - description: tx-channel per virtual slave regosters + - description: rx-channel (called observer) per virtual slave registers + - description: interrupt controller registers + - description: configuration registers + + reg-names: + oneOf: + - items: + - const: core + - const: intr + - const: cnfg + - items: + - const: core + - const: chnls + - const: obsrvr + - const: intr + - const: cnfg + + interrupts: + maxItems: 1 + + interrupt-names: + const: periph_irq + + interrupt-controller: true + + '#address-cells': true + + '#interrupt-cells': + const: 4 + description: | + cell 1: slave ID for the requested interrupt (0-15) + cell 2: peripheral ID for requested interrupt (0-255) + cell 3: the requested peripheral interrupt (0-7) + cell 4: interrupt flags indicating level-sense information, + as defined in dt-bindings/interrupt-controller/irq.h + + '#size-cells': true + + qcom,ee: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + indicates the active Execution Environment identifier + + qcom,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + which of the PMIC Arb provided channels to use for accesses + +required: + - compatible + - reg-names + - qcom,ee + - qcom,channel + +unevaluatedProperties: false + +examples: + - | + spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + + interrupt-names = "periph_irq"; + interrupts = <0 190 0>; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <0>; + + interrupt-controller; + #interrupt-cells = <4>; + }; + diff --git a/dts/Bindings/staging/net/wireless/silabs,wfx.yaml b/dts/Bindings/staging/net/wireless/silabs,wfx.yaml deleted file mode 100644 index 105725a127..0000000000 --- a/dts/Bindings/staging/net/wireless/silabs,wfx.yaml +++ /dev/null @@ -1,137 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -# Copyright (c) 2020, Silicon Laboratories, Inc. -%YAML 1.2 ---- - -$id: http://devicetree.org/schemas/staging/net/wireless/silabs,wfx.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Silicon Labs WFxxx devicetree bindings - -maintainers: - - Jérôme Pouiller - -description: > - Support for the Wifi chip WFxxx from Silicon Labs. Currently, the only device - from the WFxxx series is the WF200 described here: - https://www.silabs.com/documents/public/data-sheets/wf200-datasheet.pdf - - The WF200 can be connected via SPI or via SDIO. - - For SDIO: - - Declaring the WFxxx chip in device tree is mandatory (usually, the VID/PID is - sufficient for the SDIO devices). - - It is recommended to declare a mmc-pwrseq on SDIO host above WFx. Without - it, you may encounter issues during reboot. The mmc-pwrseq should be - compatible with mmc-pwrseq-simple. Please consult - Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more - information. - - For SPI: - - In add of the properties below, please consult - Documentation/devicetree/bindings/spi/spi-controller.yaml for optional SPI - related properties. - -properties: - compatible: - items: - - enum: - - silabs,brd4001a # WGM160P Evaluation Board - - silabs,brd8022a # WF200 Evaluation Board - - silabs,brd8023a # WFM200 Evaluation Board - - const: silabs,wf200 # Chip alone without antenna - - reg: - description: - When used on SDIO bus, must be set to 1. When used on SPI bus, it is - the chip select address of the device as defined in the SPI devices - bindings. - maxItems: 1 - - spi-max-frequency: true - - interrupts: - description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is - used, this property is required. When SDIO is used, the "in-band" - interrupt provided by the SDIO bus is used unless an interrupt is defined - in the Device Tree. - maxItems: 1 - - reset-gpios: - description: (SPI only) Phandle of gpio that will be used to reset chip - during probe. Without this property, you may encounter issues with warm - boot. - - For SDIO, the reset gpio should declared using a mmc-pwrseq. - maxItems: 1 - - wakeup-gpios: - description: Phandle of gpio that will be used to wake-up chip. Without this - property, driver will disable most of power saving features. - maxItems: 1 - - silabs,antenna-config-file: - $ref: /schemas/types.yaml#/definitions/string - description: Use an alternative file for antenna configuration (aka - "Platform Data Set" in Silabs jargon). Default depends of "compatible" - string. For "silabs,wf200", the default is 'wf200.pds'. - - local-mac-address: true - - mac-address: true - -additionalProperties: false - -required: - - compatible - - reg - -examples: - - | - #include - #include - - spi { - #address-cells = <1>; - #size-cells = <0>; - - wifi@0 { - compatible = "silabs,brd8022a", "silabs,wf200"; - pinctrl-names = "default"; - pinctrl-0 = <&wfx_irq &wfx_gpios>; - reg = <0>; - interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>; - wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - spi-max-frequency = <42000000>; - }; - }; - - - | - #include - #include - - wfx_pwrseq: wfx_pwrseq { - compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wfx_reset>; - reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - }; - - mmc { - mmc-pwrseq = <&wfx_pwrseq>; - #address-cells = <1>; - #size-cells = <0>; - - wifi@1 { - compatible = "silabs,brd8022a", "silabs,wf200"; - pinctrl-names = "default"; - pinctrl-0 = <&wfx_wakeup>; - reg = <1>; - wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - }; - }; -... diff --git a/dts/Bindings/thermal/qcom-lmh.yaml b/dts/Bindings/thermal/qcom-lmh.yaml index a9b7388ca9..e1587ddf7d 100644 --- a/dts/Bindings/thermal/qcom-lmh.yaml +++ b/dts/Bindings/thermal/qcom-lmh.yaml @@ -18,6 +18,7 @@ description: properties: compatible: enum: + - qcom,sc8180x-lmh - qcom,sdm845-lmh - qcom,sm8150-lmh diff --git a/dts/Bindings/thermal/qcom-spmi-adc-tm5.yaml b/dts/Bindings/thermal/qcom-spmi-adc-tm5.yaml index 3ea8c0c1f4..feb390d506 100644 --- a/dts/Bindings/thermal/qcom-spmi-adc-tm5.yaml +++ b/dts/Bindings/thermal/qcom-spmi-adc-tm5.yaml @@ -10,7 +10,9 @@ maintainers: properties: compatible: - const: qcom,spmi-adc-tm5 + enum: + - qcom,spmi-adc-tm5 + - qcom,spmi-adc-tm5-gen2 reg: maxItems: 1 @@ -33,6 +35,7 @@ properties: qcom,avg-samples: $ref: /schemas/types.yaml#/definitions/uint32 description: Number of samples to be used for measurement. + Not applicable for Gen2 ADC_TM peripheral. enum: - 1 - 2 @@ -45,6 +48,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: This parameter is used to decrease ADC sampling rate. Quicker measurements can be made by reducing decimation ratio. + Not applicable for Gen2 ADC_TM peripheral. enum: - 250 - 420 @@ -93,6 +97,29 @@ patternProperties: - const: 1 - enum: [ 1, 3, 4, 6, 20, 8, 10 ] + qcom,avg-samples: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of samples to be used for measurement. + This property in child node is applicable only for Gen2 ADC_TM peripheral. + enum: + - 1 + - 2 + - 4 + - 8 + - 16 + default: 1 + + qcom,decimation: + $ref: /schemas/types.yaml#/definitions/uint32 + description: This parameter is used to decrease ADC sampling rate. + Quicker measurements can be made by reducing decimation ratio. + This property in child node is applicable only for Gen2 ADC_TM peripheral. + enum: + - 85 + - 340 + - 1360 + default: 1360 + required: - reg - io-channels @@ -100,6 +127,31 @@ patternProperties: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: qcom,spmi-adc-tm5 + + then: + patternProperties: + "^([-a-z0-9]*)@[0-7]$": + properties: + qcom,decimation: false + qcom,avg-samples: false + + - if: + properties: + compatible: + contains: + const: qcom,spmi-adc-tm5-gen2 + + then: + properties: + qcom,avg-samples: false + qcom,decimation: false + required: - compatible - reg @@ -124,7 +176,7 @@ examples: #size-cells = <0>; #io-channel-cells = <1>; - /* Other propreties are omitted */ + /* Other properties are omitted */ conn-therm@4f { reg = ; qcom,ratiometric; @@ -148,4 +200,58 @@ examples: }; }; }; + + - | + #include + #include + #include + spmi_bus { + #address-cells = <1>; + #size-cells = <0>; + pmk8350_vadc: adc@3100 { + reg = <0x3100>; + compatible = "qcom,spmi-adc7"; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + /* Other properties are omitted */ + xo-therm@44 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + conn-therm@47 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + }; + + pmk8350_adc_tm: adc-tm@3400 { + compatible = "qcom,spmi-adc-tm5-gen2"; + reg = <0x3400>; + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8350-xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,decimation = <340>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + conn-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>; + qcom,avg-samples = <2>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + }; + }; ... diff --git a/dts/Bindings/thermal/qcom-tsens.yaml b/dts/Bindings/thermal/qcom-tsens.yaml index b6406bcc68..038d81338f 100644 --- a/dts/Bindings/thermal/qcom-tsens.yaml +++ b/dts/Bindings/thermal/qcom-tsens.yaml @@ -19,10 +19,11 @@ description: | properties: compatible: oneOf: - - description: msm9860 TSENS based + - description: msm8960 TSENS based items: - enum: - qcom,ipq8064-tsens + - qcom,msm8960-tsens - description: v0.1 of TSENS items: @@ -49,8 +50,10 @@ properties: - qcom,sc7180-tsens - qcom,sc7280-tsens - qcom,sc8180x-tsens + - qcom,sc8280xp-tsens - qcom,sdm630-tsens - qcom,sdm845-tsens + - qcom,sm6350-tsens - qcom,sm8150-tsens - qcom,sm8250-tsens - qcom,sm8350-tsens @@ -116,6 +119,7 @@ allOf: - qcom,ipq8064-tsens - qcom,mdm9607-tsens - qcom,msm8916-tsens + - qcom,msm8960-tsens - qcom,msm8974-tsens - qcom,msm8976-tsens - qcom,qcs404-tsens diff --git a/dts/Bindings/thermal/rzg2l-thermal.yaml b/dts/Bindings/thermal/rzg2l-thermal.yaml index ccab9511a0..1d83733978 100644 --- a/dts/Bindings/thermal/rzg2l-thermal.yaml +++ b/dts/Bindings/thermal/rzg2l-thermal.yaml @@ -17,7 +17,9 @@ properties: compatible: items: - enum: + - renesas,r9a07g043-tsu # RZ/G2UL - renesas,r9a07g044-tsu # RZ/G2{L,LC} + - renesas,r9a07g054-tsu # RZ/V2L - const: renesas,rzg2l-tsu reg: diff --git a/dts/Bindings/thermal/ti,j72xx-thermal.yaml b/dts/Bindings/thermal/ti,j72xx-thermal.yaml new file mode 100644 index 0000000000..c74f124ebf --- /dev/null +++ b/dts/Bindings/thermal/ti,j72xx-thermal.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments J72XX VTM (DTS) binding + +maintainers: + - Keerthy + +properties: + compatible: + enum: + - ti,j721e-vtm + - ti,j7200-vtm + + reg: + items: + - description: VTM cfg1 register space + - description: VTM cfg2 register space + - description: VTM efuse register space + + power-domains: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - power-domains + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + #include + wkup_vtm0: thermal-sensor@42040000 { + compatible = "ti,j721e-vtm"; + reg = <0x42040000 0x350>, + <0x42050000 0x350>, + <0x43000300 0x10>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + mpu_thermal: mpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu_crit: mpu-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +... diff --git a/dts/Bindings/timer/cdns,ttc.yaml b/dts/Bindings/timer/cdns,ttc.yaml index c3386076a9..7d821fd480 100644 --- a/dts/Bindings/timer/cdns,ttc.yaml +++ b/dts/Bindings/timer/cdns,ttc.yaml @@ -17,7 +17,6 @@ properties: maxItems: 1 interrupts: - minItems: 3 maxItems: 3 description: | A list of 3 interrupts; one per timer channel. diff --git a/dts/Bindings/timer/hpe,gxp-timer.yaml b/dts/Bindings/timer/hpe,gxp-timer.yaml new file mode 100644 index 0000000000..d33d90f44d --- /dev/null +++ b/dts/Bindings/timer/hpe,gxp-timer.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/hpe,gxp-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HPE GXP Timer + +maintainers: + - Nick Hawkins + - Jean-Marie Verdun + +properties: + compatible: + const: hpe,gxp-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: iop + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + timer@c0000000 { + compatible = "hpe,gxp-timer"; + reg = <0x80 0x16>; + interrupts = <0>; + interrupt-parent = <&vic0>; + clocks = <&iopclk>; + clock-names = "iop"; + }; diff --git a/dts/Bindings/timer/mediatek,mtk-timer.txt b/dts/Bindings/timer/mediatek,mtk-timer.txt index fbd76a8e02..6f1f9dba6e 100644 --- a/dts/Bindings/timer/mediatek,mtk-timer.txt +++ b/dts/Bindings/timer/mediatek,mtk-timer.txt @@ -23,6 +23,7 @@ Required properties: For those SoCs that use SYST * "mediatek,mt8183-timer" for MT8183 compatible timers (SYST) + * "mediatek,mt8186-timer" for MT8186 compatible timers (SYST) * "mediatek,mt8192-timer" for MT8192 compatible timers (SYST) * "mediatek,mt8195-timer" for MT8195 compatible timers (SYST) * "mediatek,mt7629-timer" for MT7629 compatible timers (SYST) diff --git a/dts/Bindings/timer/rda,8810pl-timer.txt b/dts/Bindings/timer/rda,8810pl-timer.txt deleted file mode 100644 index 4db542c9a0..0000000000 --- a/dts/Bindings/timer/rda,8810pl-timer.txt +++ /dev/null @@ -1,20 +0,0 @@ -RDA Micro RDA8810PL Timer - -Required properties: -- compatible : "rda,8810pl-timer" -- reg : Offset and length of the register set for the device. -- interrupts : Should contain two interrupts. -- interrupt-names : Should be "hwtimer", "ostimer". - -Example: - - apb@20900000 { - compatible = "simple-bus"; - ... - timer@10000 { - compatible = "rda,8810pl-timer"; - reg = <0x10000 0x1000>; - interrupts = <16 IRQ_TYPE_LEVEL_HIGH>, - <17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hwtimer", "ostimer"; - }; diff --git a/dts/Bindings/timer/rda,8810pl-timer.yaml b/dts/Bindings/timer/rda,8810pl-timer.yaml new file mode 100644 index 0000000000..f9043a4488 --- /dev/null +++ b/dts/Bindings/timer/rda,8810pl-timer.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/rda,8810pl-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RDA Micro RDA8810PL Timer + +maintainers: + - Manivannan Sadhasivam + +properties: + compatible: + const: rda,8810pl-timer + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + maxItems: 2 + + interrupt-names: + items: + - const: hwtimer + - const: ostimer + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include + + timer@20910000 { + compatible = "rda,8810pl-timer"; + reg = <0x20910000 0x1000>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>, + <17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hwtimer", "ostimer"; + }; +... diff --git a/dts/Bindings/timer/renesas,16bit-timer.txt b/dts/Bindings/timer/renesas,16bit-timer.txt deleted file mode 100644 index e8792447a1..0000000000 --- a/dts/Bindings/timer/renesas,16bit-timer.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Renesas H8/300 16bit timer - -The 16bit timer is a 16bit timer/counter with configurable clock inputs and -programmable compare match. - -Required Properties: - - - compatible: must contain "renesas,16bit-timer" - - reg: base address and length of the registers block for the timer module. - - interrupts: interrupt-specifier for the timer, IMIA - - clocks: a list of phandle, one for each entry in clock-names. - - clock-names: must contain "peripheral_clk" for the functional clock. - - renesas,channel: timer channel number. - -Example: - - timer16: timer@ffff68 { - compatible = "reneas,16bit-timer"; - reg = <0xffff68 8>, <0xffff60 8>; - interrupts = <24>; - renesas,channel = <0>; - clocks = <&pclk>; - clock-names = "peripheral_clk"; - }; - diff --git a/dts/Bindings/timer/renesas,8bit-timer.txt b/dts/Bindings/timer/renesas,8bit-timer.txt deleted file mode 100644 index 9dca3759a0..0000000000 --- a/dts/Bindings/timer/renesas,8bit-timer.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Renesas H8/300 8bit timer - -The 8bit timer is a 8bit timer/counter with configurable clock inputs and -programmable compare match. - -This implement only supported cascade mode. - -Required Properties: - - - compatible: must contain "renesas,8bit-timer" - - reg: base address and length of the registers block for the timer module. - - interrupts: interrupt-specifier for the timer, CMIA and TOVI - - clocks: a list of phandle, one for each entry in clock-names. - - clock-names: must contain "fck" for the functional clock. - -Example: - - timer8_0: timer@ffff80 { - compatible = "renesas,8bit-timer"; - reg = <0xffff80 10>; - interrupts = <36>; - clocks = <&fclk>; - clock-names = "fck"; - }; - diff --git a/dts/Bindings/timer/renesas,ostm.yaml b/dts/Bindings/timer/renesas,ostm.yaml index c399a019dd..7207929e5c 100644 --- a/dts/Bindings/timer/renesas,ostm.yaml +++ b/dts/Bindings/timer/renesas,ostm.yaml @@ -23,6 +23,7 @@ properties: - enum: - renesas,r7s72100-ostm # RZ/A1H - renesas,r7s9210-ostm # RZ/A2M + - renesas,r9a07g043-ostm # RZ/G2UL - renesas,r9a07g044-ostm # RZ/G2{L,LC} - renesas,r9a07g054-ostm # RZ/V2L - const: renesas,ostm # Generic @@ -54,6 +55,7 @@ if: compatible: contains: enum: + - renesas,r9a07g043-ostm - renesas,r9a07g044-ostm - renesas,r9a07g054-ostm then: diff --git a/dts/Bindings/timer/samsung,exynos4210-mct.yaml b/dts/Bindings/timer/samsung,exynos4210-mct.yaml index f11cbc7ccc..9c81d00b12 100644 --- a/dts/Bindings/timer/samsung,exynos4210-mct.yaml +++ b/dts/Bindings/timer/samsung,exynos4210-mct.yaml @@ -19,18 +19,28 @@ description: |+ properties: compatible: - enum: - - samsung,exynos4210-mct - - samsung,exynos4412-mct + oneOf: + - enum: + - samsung,exynos4210-mct + - samsung,exynos4412-mct + - items: + - enum: + - samsung,exynos3250-mct + - samsung,exynos5250-mct + - samsung,exynos5260-mct + - samsung,exynos5420-mct + - samsung,exynos5433-mct + - samsung,exynos850-mct + - tesla,fsd-mct + - const: samsung,exynos4210-mct clocks: - minItems: 2 maxItems: 2 clock-names: items: - - pattern: "^(fin_pll|mct)$" - - pattern: "^(fin_pll|mct)$" + - const: fin_pll + - const: mct reg: maxItems: 1 @@ -63,6 +73,56 @@ required: - interrupts - reg +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos3250-mct + then: + properties: + interrupts: + minItems: 8 + maxItems: 8 + + - if: + properties: + compatible: + contains: + const: samsung,exynos5250-mct + then: + properties: + interrupts: + minItems: 6 + maxItems: 6 + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5260-mct + - samsung,exynos5420-mct + - samsung,exynos5433-mct + - samsung,exynos850-mct + then: + properties: + interrupts: + minItems: 12 + maxItems: 12 + + - if: + properties: + compatible: + contains: + enum: + - tesla,fsd-mct + then: + properties: + interrupts: + minItems: 16 + maxItems: 16 + additionalProperties: false examples: diff --git a/dts/Bindings/timer/ti,timer-dm.yaml b/dts/Bindings/timer/ti,timer-dm.yaml new file mode 100644 index 0000000000..e32df21e63 --- /dev/null +++ b/dts/Bindings/timer/ti,timer-dm.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/ti,timer-dm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI dual-mode timer + +maintainers: + - Tony Lindgren + +description: | + The TI dual-mode timer is a general purpose timer with PWM capabilities. + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,am335x-timer + - ti,am335x-timer-1ms + - ti,am654-timer + - ti,dm814-timer + - ti,dm816-timer + - ti,omap2420-timer + - ti,omap3430-timer + - ti,omap4430-timer + - ti,omap5430-timer + - items: + - const: ti,am4372-timer + - const: ti,am335x-timer + - items: + - const: ti,am4372-timer-1ms + - const: ti,am335x-timer-1ms + + reg: + items: + - description: IO address + - description: L3 to L4 mapping for omap4/5 L4 ABE + minItems: 1 + + clocks: + items: + - description: Functional clock + - description: System clock for omap4/5 and dra7 + minItems: 1 + + clock-names: + items: + - const: fck + - const: timer_sys_ck + minItems: 1 + + interrupts: + description: + Interrupt if available. The timer PWM features may be usable + in a limited way even without interrupts. + maxItems: 1 + + ti,timer-alwon: + description: + Timer is always enabled when the SoC is powered. Note that some SoCs like + am335x can suspend to PM coprocessor RTC only mode and in that case the + SoC power is cut including timers. + type: boolean + + ti,timer-dsp: + description: + Timer is routable to the DSP in addition to the operating system. + type: boolean + + ti,timer-pwm: + description: + Timer has been wired for PWM capability. + type: boolean + + ti,timer-secure: + description: + Timer access has been limited to secure mode only. + type: boolean + + ti,hwmods: + description: + Name of the HWMOD associated with timer. This is for legacy + omap2/3 platforms only. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + +required: + - compatible + - reg + +additionalProperties: false + +allOf: + - if: + not: + properties: + compatible: + contains: + const: ti,am654-timer + then: + required: + - interrupts + + - if: + not: + properties: + compatible: + contains: + enum: + - ti,omap3430-timer + - ti,omap4430-timer + - ti,omap5430-timer + then: + properties: + reg: + maxItems: 1 + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - ti,dm814-timer + - ti,dm816-timer + - ti,omap2420-timer + - ti,omap3430-timer + then: + properties: + ti,hwmods: + items: + - pattern: "^timer([1-9]|1[0-2])$" + else: + properties: + ti,hwmods: false + +examples: + - | + timer1: timer@0 { + compatible = "ti,am335x-timer-1ms"; + reg = <0x0 0x400>; + interrupts = <67>; + ti,timer-alwon; + clocks = <&timer1_fck>; + clock-names = "fck"; + }; +... diff --git a/dts/Bindings/timer/ti,timer.txt b/dts/Bindings/timer/ti,timer.txt deleted file mode 100644 index d02e27c764..0000000000 --- a/dts/Bindings/timer/ti,timer.txt +++ /dev/null @@ -1,44 +0,0 @@ -OMAP Timer bindings - -Required properties: -- compatible: Should be set to one of the below. Please note that - OMAP44xx devices have timer instances that are 100% - register compatible with OMAP3xxx devices as well as - newer timers that are not 100% register compatible. - So for OMAP44xx devices timer instances may use - different compatible strings. - - ti,omap2420-timer (applicable to OMAP24xx devices) - ti,omap3430-timer (applicable to OMAP3xxx/44xx devices) - ti,omap4430-timer (applicable to OMAP44xx devices) - ti,omap5430-timer (applicable to OMAP543x devices) - ti,am335x-timer (applicable to AM335x devices) - ti,am335x-timer-1ms (applicable to AM335x devices) - -- reg: Contains timer register address range (base address and - length). -- interrupts: Contains the interrupt information for the timer. The - format is being dependent on which interrupt controller - the OMAP device uses. -- ti,hwmods: Name of the hwmod associated to the timer, "timer", - where is the instance number of the timer from the - HW spec. - -Optional properties: -- ti,timer-alwon: Indicates the timer is in an alway-on power domain. -- ti,timer-dsp: Indicates the timer can interrupt the on-chip DSP in - addition to the ARM CPU. -- ti,timer-pwm: Indicates the timer can generate a PWM output. -- ti,timer-secure: Indicates the timer is reserved on a secure OMAP device - and therefore cannot be used by the kernel. - -Example: - -timer12: timer@48304000 { - compatible = "ti,omap3430-timer"; - reg = <0x48304000 0x400>; - interrupts = <95>; - ti,hwmods = "timer12" - ti,timer-alwon; - ti,timer-secure; -}; diff --git a/dts/Bindings/timer/xlnx,xps-timer.yaml b/dts/Bindings/timer/xlnx,xps-timer.yaml new file mode 100644 index 0000000000..dd168d41d2 --- /dev/null +++ b/dts/Bindings/timer/xlnx,xps-timer.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/xlnx,xps-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx LogiCORE IP AXI Timer Device Tree Binding + +maintainers: + - Sean Anderson + +properties: + compatible: + contains: + const: xlnx,xps-timer-1.00.a + + clocks: + maxItems: 1 + + clock-names: + const: s_axi_aclk + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + '#pwm-cells': true + + xlnx,count-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16, 32] + default: 32 + description: + The width of the counter(s), in bits. + + xlnx,one-timer-only: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Whether only one timer is present in this block. + +required: + - compatible + - reg + - xlnx,one-timer-only + +allOf: + - if: + required: + - '#pwm-cells' + then: + allOf: + - required: + - clocks + - properties: + xlnx,one-timer-only: + const: 0 + else: + required: + - interrupts + - if: + required: + - clocks + then: + required: + - clock-names + +additionalProperties: false + +examples: + - | + timer@800e0000 { + clock-names = "s_axi_aclk"; + clocks = <&zynqmp_clk 71>; + compatible = "xlnx,xps-timer-1.00.a"; + reg = <0x800e0000 0x10000>; + interrupts = <0 39 2>; + xlnx,count-width = <16>; + xlnx,one-timer-only = <0x0>; + }; + + timer@800f0000 { + #pwm-cells = <0>; + clock-names = "s_axi_aclk"; + clocks = <&zynqmp_clk 71>; + compatible = "xlnx,xps-timer-1.00.a"; + reg = <0x800e0000 0x10000>; + xlnx,count-width = <32>; + xlnx,one-timer-only = <0x0>; + }; diff --git a/dts/Bindings/timestamp/hardware-timestamps-common.yaml b/dts/Bindings/timestamp/hardware-timestamps-common.yaml new file mode 100644 index 0000000000..fd6a7b51f5 --- /dev/null +++ b/dts/Bindings/timestamp/hardware-timestamps-common.yaml @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timestamp/hardware-timestamps-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hardware timestamp providers + +maintainers: + - Dipen Patel + +description: + Some devices/SoCs have hardware timestamp engines (HTE) which can use + hardware means to timestamp entity in realtime. The entity could be anything + from GPIOs, IRQs, Bus and so on. The hardware timestamp engine present + itself as a provider with the bindings described in this document. + +properties: + $nodename: + pattern: "^timestamp(@.*|-[0-9a-f])?$" + + "#timestamp-cells": + description: + Number of cells in a HTE specifier. + +required: + - "#timestamp-cells" + +additionalProperties: true diff --git a/dts/Bindings/timestamp/hte-consumer.yaml b/dts/Bindings/timestamp/hte-consumer.yaml new file mode 100644 index 0000000000..6456515c3d --- /dev/null +++ b/dts/Bindings/timestamp/hte-consumer.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timestamp/hte-consumer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HTE Consumer Device Tree Bindings + +maintainers: + - Dipen Patel + +select: true + +properties: + timestamps: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + The list of HTE provider phandle. The first cell must represent the + provider phandle followed by the line identifiers. The meaning of the + line identifier and exact number of arguments must be specified in the + HTE provider device tree binding document. + + timestamp-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + An optional string property to label each line specifier present in the + timestamp property. + +dependencies: + timestamp-names: [ timestamps ] + +additionalProperties: true + +examples: + - | + hte_tegra_consumer { + timestamps = <&tegra_hte_aon 0x9>, <&tegra_hte_lic 0x19>; + timestamp-names = "hte-gpio", "hte-i2c"; + }; diff --git a/dts/Bindings/timestamp/nvidia,tegra194-hte.yaml b/dts/Bindings/timestamp/nvidia,tegra194-hte.yaml new file mode 100644 index 0000000000..c31e207d16 --- /dev/null +++ b/dts/Bindings/timestamp/nvidia,tegra194-hte.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timestamp/nvidia,tegra194-hte.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra194 on chip generic hardware timestamping engine (HTE) + +maintainers: + - Dipen Patel + +description: + Tegra SoC has two instances of generic hardware timestamping engines (GTE) + known as GTE GPIO and GTE IRQ, which can monitor subset of GPIO and on chip + IRQ lines for the state change respectively, upon detection it will record + timestamp (taken from system counter) in its internal hardware FIFO. It has + a bitmap array arranged in 32bit slices where each bit represent signal/line + to enable or disable for the hardware timestamping. The GTE GPIO monitors + GPIO lines from the AON (always on) GPIO controller. + +properties: + compatible: + enum: + - nvidia,tegra194-gte-aon + - nvidia,tegra194-gte-lic + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nvidia,int-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + HTE device generates its interrupt based on this u32 FIFO threshold + value. The recommended value is 1. + minimum: 1 + maximum: 256 + + nvidia,slices: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + HTE lines are arranged in 32 bit slice where each bit represents different + line/signal that it can enable/configure for the timestamp. It is u32 + property and depends on the HTE instance in the chip. The value 3 is for + GPIO GTE and 11 for IRQ GTE. + enum: [3, 11] + + '#timestamp-cells': + description: + This represents number of line id arguments as specified by the + consumers. For the GTE IRQ, this is IRQ number as mentioned in the + SoC technical reference manual. For the GTE GPIO, its value is same as + mentioned in the nvidia GPIO device tree binding document. + const: 1 + +required: + - compatible + - reg + - interrupts + - nvidia,slices + - "#timestamp-cells" + +additionalProperties: false + +examples: + - | + tegra_hte_aon: timestamp@c1e0000 { + compatible = "nvidia,tegra194-gte-aon"; + reg = <0xc1e0000 0x10000>; + interrupts = <0 13 0x4>; + nvidia,int-threshold = <1>; + nvidia,slices = <3>; + #timestamp-cells = <1>; + }; + + - | + tegra_hte_lic: timestamp@3aa0000 { + compatible = "nvidia,tegra194-gte-lic"; + reg = <0x3aa0000 0x10000>; + interrupts = <0 11 0x4>; + nvidia,int-threshold = <1>; + nvidia,slices = <11>; + #timestamp-cells = <1>; + }; + +... diff --git a/dts/Bindings/trivial-devices.yaml b/dts/Bindings/trivial-devices.yaml index 550a2e5c9e..6aafa71806 100644 --- a/dts/Bindings/trivial-devices.yaml +++ b/dts/Bindings/trivial-devices.yaml @@ -47,7 +47,9 @@ properties: - at,24c08 # i2c trusted platform module (TPM) - atmel,at97sc3204t - # i2c h/w symmetric crypto module + # ATSHA204 - i2c h/w symmetric crypto module + - atmel,atsha204 + # ATSHA204A - i2c h/w symmetric crypto module - atmel,atsha204a # i2c h/w elliptic curve crypto module - atmel,atecc508a @@ -87,6 +89,8 @@ properties: - devantech,srf08 # Devantech SRF10 ultrasonic ranger - devantech,srf10 + # DH electronics GmbH on-board CPLD trivial SPI device + - dh,dhcom-board # DA9053: flexible system level PMIC with multicore support - dlg,da9053 # DA9063: system PMIC for quad-core application processors @@ -143,6 +147,10 @@ properties: - infineon,xdpe12254 # Infineon Multi-phase Digital VR Controller xdpe12284 - infineon,xdpe12284 + # Infineon Multi-phase Digital VR Controller xdpe15284 + - infineon,xdpe15284 + # Infineon Multi-phase Digital VR Controller xdpe152c4 + - infineon,xdpe152c4 # Injoinic IP5108 2.0A Power Bank IC with I2C - injoinic,ip5108 # Injoinic IP5109 2.1A Power Bank IC with I2C @@ -215,6 +223,8 @@ properties: - memsic,mxc6255 # MEMSIC 3-axis accelerometer - memsic,mxc6655 + # Menlo on-board CPLD trivial SPI device + - menlo,m53cpld # Microchip differential I2C ADC, 1 Channel, 18 bit - microchip,mcp3421 # Microchip differential I2C ADC, 2 Channel, 18 bit diff --git a/dts/Bindings/usb/am33xx-usb.txt b/dts/Bindings/usb/am33xx-usb.txt index 7a198a3040..654ffc62d0 100644 --- a/dts/Bindings/usb/am33xx-usb.txt +++ b/dts/Bindings/usb/am33xx-usb.txt @@ -61,8 +61,9 @@ DMA endpoint number (0 … 14 for endpoints 1 … 15 on instance 0 and 15 … 29 for endpoints 1 … 15 on instance 1). The second number is 0 for RX and 1 for TX transfers. -- #dma-channels: should be set to 30 representing the 15 endpoints for +- dma-channels: should be set to 30 representing the 15 endpoints for each USB instance. +- #dma-channels: deprecated Example: ~~~~~~~~ @@ -193,7 +194,7 @@ usb: usb@47400000 { interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; - #dma-channels = <30>; - #dma-requests = <256>; + dma-channels = <30>; + dma-requests = <256>; }; }; diff --git a/dts/Bindings/usb/ci-hdrc-usb2.txt b/dts/Bindings/usb/ci-hdrc-usb2.txt index a5c5db6a0b..ba51fb1252 100644 --- a/dts/Bindings/usb/ci-hdrc-usb2.txt +++ b/dts/Bindings/usb/ci-hdrc-usb2.txt @@ -151,7 +151,7 @@ Example for HSIC: #address-cells = <1>; #size-cells = <0>; - usbnet: smsc@1 { + usbnet: ethernet@1 { compatible = "usb424,9730"; reg = <1>; }; diff --git a/dts/Bindings/usb/da8xx-usb.txt b/dts/Bindings/usb/da8xx-usb.txt index 9ce22551b2..fb2027a7d8 100644 --- a/dts/Bindings/usb/da8xx-usb.txt +++ b/dts/Bindings/usb/da8xx-usb.txt @@ -36,7 +36,8 @@ DMA - #dma-cells: should be set to 2. The first number represents the channel number (0 … 3 for endpoints 1 … 4). The second number is 0 for RX and 1 for TX transfers. -- #dma-channels: should be set to 4 representing the 4 endpoints. +- dma-channels: should be set to 4 representing the 4 endpoints. +- #dma-channels: deprecated Example: usb_phy: usb-phy { @@ -74,7 +75,7 @@ Example: reg-names = "controller", "scheduler", "queuemgr"; interrupts = <58>; #dma-cells = <2>; - #dma-channels = <4>; + dma-channels = <4>; }; }; diff --git a/dts/Bindings/usb/dwc2.yaml b/dts/Bindings/usb/dwc2.yaml index 4cebce682d..8d22a9843b 100644 --- a/dts/Bindings/usb/dwc2.yaml +++ b/dts/Bindings/usb/dwc2.yaml @@ -17,6 +17,13 @@ properties: oneOf: - const: brcm,bcm2835-usb - const: hisilicon,hi6220-usb + - const: ingenic,jz4775-otg + - const: ingenic,jz4780-otg + - const: ingenic,x1000-otg + - const: ingenic,x1600-otg + - const: ingenic,x1700-otg + - const: ingenic,x1830-otg + - const: ingenic,x2000-otg - items: - const: rockchip,rk3066-usb - const: snps,dwc2 @@ -139,12 +146,12 @@ properties: snps,need-phy-for-wake: $ref: /schemas/types.yaml#/definitions/flag - description: If present indicates that the phy needs to be left on for + description: If present indicates that the phy needs to be left on for remote wakeup during suspend. snps,reset-phy-on-wake: $ref: /schemas/types.yaml#/definitions/flag - description: If present indicates that we need to reset the PHY when we + description: If present indicates that we need to reset the PHY when we detect a wakeup. This is due to a hardware errata. port: diff --git a/dts/Bindings/usb/dwc3-xilinx.yaml b/dts/Bindings/usb/dwc3-xilinx.yaml index f77c16e203..098b73134a 100644 --- a/dts/Bindings/usb/dwc3-xilinx.yaml +++ b/dts/Bindings/usb/dwc3-xilinx.yaml @@ -71,6 +71,10 @@ properties: - usb2-phy - usb3-phy + reset-gpios: + description: GPIO used for the reset ulpi-phy + maxItems: 1 + # Required child node: patternProperties: diff --git a/dts/Bindings/usb/fcs,fsa4480.yaml b/dts/Bindings/usb/fcs,fsa4480.yaml new file mode 100644 index 0000000000..9473f26b06 --- /dev/null +++ b/dts/Bindings/usb/fcs,fsa4480.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/fcs,fsa4480.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ON Semiconductor Analog Audio Switch + +maintainers: + - Bjorn Andersson + +properties: + compatible: + enum: + - fcs,fsa4480 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: + description: power supply (2.7V-5.5V) + + mode-switch: + description: Flag the port as possible handle of altmode switching + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the FSA4480 to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - reg + - port + +additionalProperties: false + +examples: + - | + #include + i2c13 { + #address-cells = <1>; + #size-cells = <0>; + + fsa4480@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + + vcc-supply = <&vreg_bob>; + + mode-switch; + orientation-switch; + + port { + fsa4480_ept: endpoint { + remote-endpoint = <&typec_controller>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/usb/generic-ehci.yaml b/dts/Bindings/usb/generic-ehci.yaml index 8913497624..0b4524b640 100644 --- a/dts/Bindings/usb/generic-ehci.yaml +++ b/dts/Bindings/usb/generic-ehci.yaml @@ -55,6 +55,7 @@ properties: - brcm,bcm7420-ehci - brcm,bcm7425-ehci - brcm,bcm7435-ehci + - hpe,gxp-ehci - ibm,476gtr-ehci - nxp,lpc1850-ehci - qca,ar7100-ehci diff --git a/dts/Bindings/usb/generic-ohci.yaml b/dts/Bindings/usb/generic-ohci.yaml index acbf94fa5f..e2ac846653 100644 --- a/dts/Bindings/usb/generic-ohci.yaml +++ b/dts/Bindings/usb/generic-ohci.yaml @@ -42,6 +42,7 @@ properties: - brcm,bcm7420-ohci - brcm,bcm7425-ohci - brcm,bcm7435-ohci + - hpe,gxp-ohci - ibm,476gtr-ohci - ingenic,jz4740-ohci - snps,hsdk-v1.0-ohci diff --git a/dts/Bindings/usb/mediatek,mt6360-tcpc.yaml b/dts/Bindings/usb/mediatek,mt6360-tcpc.yaml index 1e8e1c2218..8db1f8b597 100644 --- a/dts/Bindings/usb/mediatek,mt6360-tcpc.yaml +++ b/dts/Bindings/usb/mediatek,mt6360-tcpc.yaml @@ -50,6 +50,11 @@ examples: mt6360@34 { compatible = "mediatek,mt6360"; reg = <0x34>; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "IRQB"; + interrupt-controller; + #interrupt-cells = <1>; + tcpc { compatible = "mediatek,mt6360-tcpc"; interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; diff --git a/dts/Bindings/usb/mediatek,mtu3.yaml b/dts/Bindings/usb/mediatek,mtu3.yaml index df766f8de8..37b02a841d 100644 --- a/dts/Bindings/usb/mediatek,mtu3.yaml +++ b/dts/Bindings/usb/mediatek,mtu3.yaml @@ -25,6 +25,7 @@ properties: - mediatek,mt8173-mtu3 - mediatek,mt8183-mtu3 - mediatek,mt8192-mtu3 + - mediatek,mt8195-mtu3 - const: mediatek,mtu3 reg: diff --git a/dts/Bindings/usb/qcom,dwc3.yaml b/dts/Bindings/usb/qcom,dwc3.yaml index ce252db2aa..e336fe2e03 100644 --- a/dts/Bindings/usb/qcom,dwc3.yaml +++ b/dts/Bindings/usb/qcom,dwc3.yaml @@ -16,16 +16,21 @@ properties: - qcom,ipq4019-dwc3 - qcom,ipq6018-dwc3 - qcom,ipq8064-dwc3 + - qcom,ipq8074-dwc3 - qcom,msm8953-dwc3 + - qcom,msm8994-dwc3 - qcom,msm8996-dwc3 - qcom,msm8998-dwc3 + - qcom,qcs404-dwc3 - qcom,sc7180-dwc3 - qcom,sc7280-dwc3 - qcom,sdm660-dwc3 - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 + - qcom,sdx65-dwc3 - qcom,sm4250-dwc3 - qcom,sm6115-dwc3 + - qcom,sm6125-dwc3 - qcom,sm6350-dwc3 - qcom,sm8150-dwc3 - qcom,sm8250-dwc3 @@ -50,26 +55,22 @@ properties: maxItems: 1 clocks: - description: - A list of phandle and clock-specifier pairs for the clocks - listed in clock-names. - items: - - description: System Config NOC clock. - - description: Master/Core clock, has to be >= 125 MHz - for SS operation and >= 60MHz for HS operation. - - description: System bus AXI clock. - - description: Mock utmi clock needed for ITP/SOF generation - in host mode. Its frequency should be 19.2MHz. - - description: Sleep clock, used for wakeup when - USB3 core goes into low power mode (U3). + description: | + Several clocks are used, depending on the variant. Typical ones are:: + - cfg_noc:: System Config NOC clock. + - core:: Master/Core clock, has to be >= 125 MHz for SS operation and >= + 60MHz for HS operation. + - iface:: System bus AXI clock. + - sleep:: Sleep clock, used for wakeup when USB3 core goes into low + power mode (U3). + - mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host + mode. Its frequency should be 19.2MHz. + minItems: 1 + maxItems: 6 clock-names: - items: - - const: cfg_noc - - const: core - - const: iface - - const: mock_utmi - - const: sleep + minItems: 1 + maxItems: 6 assigned-clocks: items: @@ -132,6 +133,185 @@ required: - interrupts - interrupt-names +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq4019-dwc3 + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8064-dwc3 + then: + properties: + clocks: + items: + - description: Master/Core clock, has to be >= 125 MHz + for SS operation and >= 60MHz for HS operation. + clock-names: + items: + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8953-dwc3 + - qcom,msm8996-dwc3 + - qcom,msm8998-dwc3 + - qcom,sc7180-dwc3 + - qcom,sc7280-dwc3 + - qcom,sdm845-dwc3 + - qcom,sdx55-dwc3 + - qcom,sm6350-dwc3 + then: + properties: + clocks: + maxItems: 5 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq6018-dwc3 + then: + properties: + clocks: + minItems: 3 + maxItems: 4 + clock-names: + oneOf: + - items: + - const: core + - const: sleep + - const: mock_utmi + - items: + - const: cfg_noc + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-dwc3 + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: cfg_noc + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8994-dwc3 + - qcom,qcs404-dwc3 + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: core + - const: iface + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm660-dwc3 + then: + properties: + clocks: + minItems: 6 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: bus + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6125-dwc3 + - qcom,sm8150-dwc3 + - qcom,sm8250-dwc3 + - qcom,sm8450-dwc3 + then: + properties: + clocks: + minItems: 6 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: xo + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8350-dwc3 + then: + properties: + clocks: + minItems: 5 + maxItems: 6 + clock-names: + minItems: 5 + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: xo + + additionalProperties: false examples: @@ -153,10 +333,13 @@ examples: clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; diff --git a/dts/Bindings/usb/renesas,usbhs.yaml b/dts/Bindings/usb/renesas,usbhs.yaml index 0bb841b280..bad55dfb2f 100644 --- a/dts/Bindings/usb/renesas,usbhs.yaml +++ b/dts/Bindings/usb/renesas,usbhs.yaml @@ -19,6 +19,7 @@ properties: - items: - enum: - renesas,usbhs-r7s9210 # RZ/A2 + - renesas,usbhs-r9a07g043 # RZ/G2UL - renesas,usbhs-r9a07g044 # RZ/G2{L,LC} - renesas,usbhs-r9a07g054 # RZ/V2L - const: renesas,rza2-usbhs @@ -118,6 +119,7 @@ allOf: compatible: contains: enum: + - renesas,usbhs-r9a07g043 - renesas,usbhs-r9a07g044 - renesas,usbhs-r9a07g054 then: @@ -128,6 +130,8 @@ allOf: - description: U2P_INT_DMA[0] - description: U2P_INT_DMA[1] - description: U2P_INT_DMAERR + required: + - resets else: properties: interrupts: diff --git a/dts/Bindings/usb/samsung,exynos-usb2.yaml b/dts/Bindings/usb/samsung,exynos-usb2.yaml index 9c92defbba..caa572dcee 100644 --- a/dts/Bindings/usb/samsung,exynos-usb2.yaml +++ b/dts/Bindings/usb/samsung,exynos-usb2.yaml @@ -15,9 +15,6 @@ properties: - samsung,exynos4210-ehci - samsung,exynos4210-ohci - '#address-cells': - const: 1 - clocks: maxItems: 1 @@ -46,15 +43,6 @@ properties: Only for controller in EHCI mode, if present, specifies the GPIO that needs to be pulled up for the bus to be powered. - '#size-cells': - const: 0 - -patternProperties: - "^.*@[0-9a-f]{1,2}$": - description: The hard wired USB devices - type: object - $ref: /usb/usb-device.yaml - required: - compatible - clocks @@ -65,6 +53,7 @@ required: - reg allOf: + - $ref: usb-hcd.yaml# - if: properties: compatible: @@ -74,7 +63,7 @@ allOf: properties: samsung,vbus-gpio: false -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/usb/smsc,usb3503.yaml b/dts/Bindings/usb/smsc,usb3503.yaml index 39228a506b..321b6f1661 100644 --- a/dts/Bindings/usb/smsc,usb3503.yaml +++ b/dts/Bindings/usb/smsc,usb3503.yaml @@ -45,6 +45,7 @@ properties: property if all ports have to be enabled. initial-mode: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2] description: > Specifies initial mode. 1 for Hub mode, 2 for standby mode. @@ -77,7 +78,7 @@ examples: i2c { #address-cells = <1>; #size-cells = <0>; - + usb-hub@8 { compatible = "smsc,usb3503"; reg = <0x08>; diff --git a/dts/Bindings/usb/snps,dwc3.yaml b/dts/Bindings/usb/snps,dwc3.yaml index f4471f8bdb..d41265ba8c 100644 --- a/dts/Bindings/usb/snps,dwc3.yaml +++ b/dts/Bindings/usb/snps,dwc3.yaml @@ -68,6 +68,8 @@ properties: - enum: [bus_early, ref, suspend] - true + dma-coherent: true + iommus: maxItems: 1 diff --git a/dts/Bindings/usb/ti,am62-usb.yaml b/dts/Bindings/usb/ti,am62-usb.yaml new file mode 100644 index 0000000000..d25fc708e3 --- /dev/null +++ b/dts/Bindings/usb/ti,am62-usb.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,am62-usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI's AM62 wrapper module for the Synopsys USBSS-DRD controller + +maintainers: + - Aswath Govindraju + +properties: + compatible: + const: ti,am62-usb + + reg: + maxItems: 1 + + ranges: true + + power-domains: + description: + PM domain provider node and an args specifier containing + the USB ISO device id value. See, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml + maxItems: 1 + + clocks: + description: Clock phandle to usb2_refclk + maxItems: 1 + + clock-names: + items: + - const: ref + + ti,vbus-divider: + description: + Should be present if USB VBUS line is connected to the + VBUS pin of the SoC via a 1/3 voltage divider. + type: boolean + + ti,syscon-phy-pll-refclk: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the SYSCON entry + - description: USB phy control register offset within SYSCON + description: + Specifier for conveying frequency of ref clock input, for the + operation of USB2PHY. + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + +patternProperties: + "^usb@[0-9a-f]+$": + $ref: snps,dwc3.yaml# + description: Required child node + +required: + - compatible + - reg + - power-domains + - clocks + - clock-names + - ti,syscon-phy-pll-refclk + +additionalProperties: false + +examples: + - | + #include + #include + #include + + bus { + #address-cells = <2>; + #size-cells = <2>; + + usbss1: usb@f910000 { + compatible = "ti,am62-usb"; + reg = <0x00 0x0f910000 0x00 0x800>; + clocks = <&k3_clks 162 3>; + clock-names = "ref"; + ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>; + power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + + usb@31100000 { + compatible = "snps,dwc3"; + reg =<0x00 0x31100000 0x00 0x50000>; + interrupts = , /* irq.0 */ + ; /* irq.0 */ + interrupt-names = "host", "peripheral"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + }; diff --git a/dts/Bindings/vendor-prefixes.yaml b/dts/Bindings/vendor-prefixes.yaml index 01430973ec..6bb20b4554 100644 --- a/dts/Bindings/vendor-prefixes.yaml +++ b/dts/Bindings/vendor-prefixes.yaml @@ -283,6 +283,8 @@ patternProperties: description: Shenzen Chuangsiqi Technology Co.,Ltd. "^ctera,.*": description: CTERA Networks Intl. + "^ctu,.*": + description: Czech Technical University in Prague "^cubietech,.*": description: Cubietech, Ltd. "^cui,.*": @@ -383,6 +385,8 @@ patternProperties: description: Empire Electronix "^emtrion,.*": description: emtrion GmbH + "^enclustra,.*": + description: Enclustra GmbH "^endless,.*": description: Endless Mobile, Inc. "^ene,.*": @@ -1082,6 +1086,8 @@ patternProperties: description: Sensirion AG "^sensortek,.*": description: Sensortek Technology Corporation + "^sercomm,.*": + description: Sercomm (Suzhou) Corporation "^sff,.*": description: Small Form Factor Committee "^sgd,.*": @@ -1130,6 +1136,8 @@ patternProperties: description: Sinlinx Electronics Technology Co., LTD "^sinovoip,.*": description: SinoVoip Co., Ltd + "^sinowealth,.*": + description: SINO WEALTH Electronic Ltd. "^sipeed,.*": description: Shenzhen Sipeed Technology Co., Ltd. "^sirf,.*": @@ -1193,10 +1201,14 @@ patternProperties: description: StorLink Semiconductors, Inc. "^storm,.*": description: Storm Semiconductor, Inc. + "^storopack,.*": + description: Storopack "^summit,.*": description: Summit microelectronics "^sunchip,.*": description: Shenzhen Sunchip Technology Co., Ltd + "^sundance,.*": + description: Sundance DSP Inc. "^sunplus,.*": description: Sunplus Technology Co., Ltd. "^SUNW,.*": diff --git a/dts/Bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/dts/Bindings/watchdog/allwinner,sun4i-a10-wdt.yaml index 43afa24513..cbcf19f514 100644 --- a/dts/Bindings/watchdog/allwinner,sun4i-a10-wdt.yaml +++ b/dts/Bindings/watchdog/allwinner,sun4i-a10-wdt.yaml @@ -26,10 +26,8 @@ properties: - allwinner,sun50i-h616-wdt - allwinner,sun50i-r329-wdt - allwinner,sun50i-r329-wdt-reset + - allwinner,suniv-f1c100s-wdt - const: allwinner,sun6i-a31-wdt - - items: - - const: allwinner,suniv-f1c100s-wdt - - const: allwinner,sun4i-a10-wdt - const: allwinner,sun20i-d1-wdt - items: - const: allwinner,sun20i-d1-wdt-reset @@ -41,14 +39,8 @@ properties: clocks: minItems: 1 items: - - description: High-frequency oscillator input, divided internally - - description: Low-frequency oscillator input, only found on some variants - - clock-names: - minItems: 1 - items: - - const: hosc - - const: losc + - description: 32 KHz input clock + - description: secondary clock source interrupts: maxItems: 1 @@ -73,9 +65,14 @@ then: properties: clocks: minItems: 2 + items: + - description: High-frequency oscillator input, divided internally + - description: Low-frequency oscillator input clock-names: - minItems: 2 + items: + - const: hosc + - const: losc required: - clock-names @@ -85,9 +82,6 @@ else: clocks: maxItems: 1 - clock-names: - maxItems: 1 - unevaluatedProperties: false examples: diff --git a/dts/Bindings/watchdog/da9062-wdt.txt b/dts/Bindings/watchdog/da9062-wdt.txt index 950e4fba8d..354314d854 100644 --- a/dts/Bindings/watchdog/da9062-wdt.txt +++ b/dts/Bindings/watchdog/da9062-wdt.txt @@ -10,6 +10,12 @@ Optional properties: - dlg,use-sw-pm: Add this property to disable the watchdog during suspend. Only use this option if you can't use the watchdog automatic suspend function during a suspend (see register CONTROL_B). +- dlg,wdt-sd: Set what happens on watchdog timeout. If this bit is set the + watchdog timeout triggers SHUTDOWN, if cleared the watchdog triggers + POWERDOWN. Can be 0 or 1. Only use this option if you want to change the + default chip's OTP setting for WATCHDOG_SD bit. If this property is NOT + set the WATCHDOG_SD bit and on timeout watchdog behavior will match the + chip's OTP settings. Example: DA9062 diff --git a/dts/Bindings/watchdog/faraday,ftwdt010.txt b/dts/Bindings/watchdog/faraday,ftwdt010.txt deleted file mode 100644 index 9ecdb502e6..0000000000 --- a/dts/Bindings/watchdog/faraday,ftwdt010.txt +++ /dev/null @@ -1,22 +0,0 @@ -Faraday Technology FTWDT010 watchdog - -This is an IP part from Faraday Technology found in the Gemini -SoCs and others. - -Required properties: -- compatible : must be one of - "faraday,ftwdt010" - "cortina,gemini-watchdog", "faraday,ftwdt010" -- reg : shall contain base register location and length -- interrupts : shall contain the interrupt for the watchdog - -Optional properties: -- timeout-sec : the default watchdog timeout in seconds. - -Example: - -watchdog@41000000 { - compatible = "faraday,ftwdt010"; - reg = <0x41000000 0x1000>; - interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; -}; diff --git a/dts/Bindings/watchdog/faraday,ftwdt010.yaml b/dts/Bindings/watchdog/faraday,ftwdt010.yaml new file mode 100644 index 0000000000..ca9e1beff7 --- /dev/null +++ b/dts/Bindings/watchdog/faraday,ftwdt010.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/faraday,ftwdt010.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday Technology FTWDT010 watchdog + +maintainers: + - Linus Walleij + - Corentin Labbe + +description: | + This is an IP part from Faraday Technology found in the Gemini + SoCs and others. + +allOf: + - $ref: "watchdog.yaml#" + +properties: + compatible: + oneOf: + - const: faraday,ftwdt010 + - items: + - enum: + - cortina,gemini-watchdog + - moxa,moxart-watchdog + - const: faraday,ftwdt010 + + reg: + maxItems: 1 + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: PCLK + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + watchdog@41000000 { + compatible = "faraday,ftwdt010"; + reg = <0x41000000 0x1000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + timeout-secs = <5>; + }; + - | + watchdog: watchdog@98500000 { + compatible = "moxa,moxart-watchdog", "faraday,ftwdt010"; + reg = <0x98500000 0x10>; + clocks = <&clk_apb>; + clock-names = "PCLK"; + }; +... diff --git a/dts/Bindings/watchdog/fsl-imx7ulp-wdt.yaml b/dts/Bindings/watchdog/fsl-imx7ulp-wdt.yaml index 4ca8a31359..8562978aa0 100644 --- a/dts/Bindings/watchdog/fsl-imx7ulp-wdt.yaml +++ b/dts/Bindings/watchdog/fsl-imx7ulp-wdt.yaml @@ -19,6 +19,7 @@ properties: - items: - const: fsl,imx8ulp-wdt - const: fsl,imx7ulp-wdt + - const: fsl,imx93-wdt reg: maxItems: 1 diff --git a/dts/Bindings/watchdog/mtk-wdt.txt b/dts/Bindings/watchdog/mtk-wdt.txt index a97418c74f..762c62e428 100644 --- a/dts/Bindings/watchdog/mtk-wdt.txt +++ b/dts/Bindings/watchdog/mtk-wdt.txt @@ -16,6 +16,7 @@ Required properties: "mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629 "mediatek,mt7986-wdt", "mediatek,mt6589-wdt": for MT7986 "mediatek,mt8183-wdt": for MT8183 + "mediatek,mt8186-wdt", "mediatek,mt6589-wdt": for MT8186 "mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516 "mediatek,mt8192-wdt": for MT8192 "mediatek,mt8195-wdt", "mediatek,mt6589-wdt": for MT8195 diff --git a/dts/Bindings/watchdog/qcom-wdt.yaml b/dts/Bindings/watchdog/qcom-wdt.yaml index 16c6f82a13..2bd6b4a526 100644 --- a/dts/Bindings/watchdog/qcom-wdt.yaml +++ b/dts/Bindings/watchdog/qcom-wdt.yaml @@ -14,22 +14,29 @@ allOf: properties: compatible: - enum: - - qcom,apss-wdt-qcs404 - - qcom,apss-wdt-sc7180 - - qcom,apss-wdt-sc7280 - - qcom,apss-wdt-sdm845 - - qcom,apss-wdt-sdx55 - - qcom,apss-wdt-sm6350 - - qcom,apss-wdt-sm8150 - - qcom,apss-wdt-sm8250 - - qcom,kpss-timer - - qcom,kpss-wdt - - qcom,kpss-wdt-apq8064 - - qcom,kpss-wdt-ipq4019 - - qcom,kpss-wdt-ipq8064 - - qcom,kpss-wdt-msm8960 - - qcom,scss-timer + oneOf: + - items: + - enum: + - qcom,apss-wdt-qcs404 + - qcom,apss-wdt-sc7180 + - qcom,apss-wdt-sc7280 + - qcom,apss-wdt-sc8180x + - qcom,apss-wdt-sc8280xp + - qcom,apss-wdt-sdm845 + - qcom,apss-wdt-sdx55 + - qcom,apss-wdt-sm6350 + - qcom,apss-wdt-sm8150 + - qcom,apss-wdt-sm8250 + - const: qcom,kpss-wdt + - items: + - enum: + - qcom,kpss-wdt + - qcom,kpss-timer + - qcom,kpss-wdt-apq8064 + - qcom,kpss-wdt-ipq4019 + - qcom,kpss-wdt-ipq8064 + - qcom,kpss-wdt-msm8960 + - qcom,scss-timer reg: maxItems: 1 diff --git a/dts/Bindings/watchdog/renesas,wdt.yaml b/dts/Bindings/watchdog/renesas,wdt.yaml index d060438e14..a8d7dde527 100644 --- a/dts/Bindings/watchdog/renesas,wdt.yaml +++ b/dts/Bindings/watchdog/renesas,wdt.yaml @@ -21,8 +21,15 @@ properties: - items: - enum: + - renesas,r9a06g032-wdt # RZ/N1D + - const: renesas,rzn1-wdt # RZ/N1 + + - items: + - enum: + - renesas,r9a07g043-wdt # RZ/G2UL - renesas,r9a07g044-wdt # RZ/G2{L,LC} - - const: renesas,rzg2l-wdt # RZ/G2L + - renesas,r9a07g054-wdt # RZ/V2L + - const: renesas,rzg2l-wdt - items: - enum: @@ -52,11 +59,11 @@ properties: - renesas,r8a77980-wdt # R-Car V3H - renesas,r8a77990-wdt # R-Car E3 - renesas,r8a77995-wdt # R-Car D3 - - renesas,r8a779a0-wdt # R-Car V3U - const: renesas,rcar-gen3-wdt # R-Car Gen3 and RZ/G2 - items: - enum: + - renesas,r8a779a0-wdt # R-Car V3U - renesas,r8a779f0-wdt # R-Car S4-8 - const: renesas,rcar-gen4-wdt # R-Car Gen4 @@ -94,6 +101,7 @@ allOf: contains: enum: - renesas,rza-wdt + - renesas,rzn1-wdt then: required: - power-domains diff --git a/dts/Bindings/watchdog/socionext,uniphier-wdt.yaml b/dts/Bindings/watchdog/socionext,uniphier-wdt.yaml index a059d16cb4..90698cfa8f 100644 --- a/dts/Bindings/watchdog/socionext,uniphier-wdt.yaml +++ b/dts/Bindings/watchdog/socionext,uniphier-wdt.yaml @@ -19,7 +19,7 @@ properties: required: - compatible -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/watchdog/sunplus,sp7021-wdt.yaml b/dts/Bindings/watchdog/sunplus,sp7021-wdt.yaml new file mode 100644 index 0000000000..d902710131 --- /dev/null +++ b/dts/Bindings/watchdog/sunplus,sp7021-wdt.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/sunplus,sp7021-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SoCs Watchdog + +maintainers: + - XianTao Hu + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + const: sunplus,sp7021-wdt + + reg: + items: + - description: watchdog registers regions + - description: miscellaneous control registers regions + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - resets + +additionalProperties: false + +examples: + - | + watchdog: watchdog@9c000630 { + compatible = "sunplus,sp7021-wdt"; + reg = <0x9c000630 0x08>, <0x9c000274 0x04>; + clocks = <&clkc 0x24>; + resets = <&rstc 0x14>; + }; +... diff --git a/dts/Bindings/writing-bindings.rst b/dts/Bindings/writing-bindings.rst index 18d9e0689d..5465eced2a 100644 --- a/dts/Bindings/writing-bindings.rst +++ b/dts/Bindings/writing-bindings.rst @@ -58,6 +58,31 @@ Properties - DO define properties in terms of constraints. How many entries? What are possible values? What is the order? +Typical cases and caveats +========================= + +- Phandle entries, like clocks/dmas/interrupts/resets, should always be + explicitly ordered. Include the {clock,dma,interrupt,reset}-names if there is + more than one phandle. When used, both of these fields need the same + constraints (e.g. list of items). + +- For names used in {clock,dma,interrupt,reset}-names, do not add any suffix, + e.g.: "tx" instead of "txirq" (for interrupt). + +- Properties without schema types (e.g. without standard suffix or not defined + by schema) need the type, even if this is an enum. + +- If schema includes other schema (e.g. /schemas/i2c/i2c-controller.yaml) use + "unevaluatedProperties:false". In other cases, usually use + "additionalProperties:false". + +- For sub-blocks/components of bigger device (e.g. SoC blocks) use rather + device-based compatible (e.g. SoC-based compatible), instead of custom + versioning of that component. + For example use "vendor,soc1234-i2c" instead of "vendor,i2c-v2". + +- "syscon" is not a generic property. Use vendor and type, e.g. + "vendor,power-manager-syscon". Board/SoC .dts Files ==================== diff --git a/dts/Bindings/writing-schema.rst b/dts/Bindings/writing-schema.rst index 95ecf55559..4a381d20f2 100644 --- a/dts/Bindings/writing-schema.rst +++ b/dts/Bindings/writing-schema.rst @@ -108,6 +108,12 @@ The YAML Devicetree format also makes all string values an array and scalar values a matrix (in order to define groupings) even when only a single value is present. Single entries in schemas are fixed up to match this encoding. +Coding style +------------ + +Use YAML coding style (two-space indentation). For DTS examples in the schema, +preferred is four-space indentation. + Testing ------- @@ -128,6 +134,8 @@ installed first. On Debian/Ubuntu systems:: Several executables (dt-doc-validate, dt-mk-schema, dt-validate) will be installed. Ensure they are in your PATH (~/.local/bin by default). +Recommended is also to install yamllint (used by dtschema when present). + Running checks ~~~~~~~~~~~~~~ diff --git a/dts/include/dt-bindings/clock/en7523-clk.h b/dts/include/dt-bindings/clock/en7523-clk.h new file mode 100644 index 0000000000..717d23a5e5 --- /dev/null +++ b/dts/include/dt-bindings/clock/en7523-clk.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ + +#ifndef _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ +#define _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ + +#define EN7523_CLK_GSW 0 +#define EN7523_CLK_EMI 1 +#define EN7523_CLK_BUS 2 +#define EN7523_CLK_SLIC 3 +#define EN7523_CLK_SPI 4 +#define EN7523_CLK_NPU 5 +#define EN7523_CLK_CRYPTO 6 +#define EN7523_CLK_PCIE 7 + +#define EN7523_NUM_CLOCKS 8 + +#endif /* _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ */ diff --git a/dts/include/dt-bindings/clock/imx8mn-clock.h b/dts/include/dt-bindings/clock/imx8mn-clock.h index 01e8bab1d7..07b8a282c2 100644 --- a/dts/include/dt-bindings/clock/imx8mn-clock.h +++ b/dts/include/dt-bindings/clock/imx8mn-clock.h @@ -243,6 +243,20 @@ #define IMX8MN_CLK_M7_CORE 221 -#define IMX8MN_CLK_END 222 +#define IMX8MN_CLK_GPT_3M 222 +#define IMX8MN_CLK_GPT1 223 +#define IMX8MN_CLK_GPT1_ROOT 224 +#define IMX8MN_CLK_GPT2 225 +#define IMX8MN_CLK_GPT2_ROOT 226 +#define IMX8MN_CLK_GPT3 227 +#define IMX8MN_CLK_GPT3_ROOT 228 +#define IMX8MN_CLK_GPT4 229 +#define IMX8MN_CLK_GPT4_ROOT 230 +#define IMX8MN_CLK_GPT5 231 +#define IMX8MN_CLK_GPT5_ROOT 232 +#define IMX8MN_CLK_GPT6 233 +#define IMX8MN_CLK_GPT6_ROOT 234 + +#define IMX8MN_CLK_END 235 #endif diff --git a/dts/include/dt-bindings/clock/imx8mp-clock.h b/dts/include/dt-bindings/clock/imx8mp-clock.h index 235c7a00d3..9d5cc2ddde 100644 --- a/dts/include/dt-bindings/clock/imx8mp-clock.h +++ b/dts/include/dt-bindings/clock/imx8mp-clock.h @@ -317,8 +317,15 @@ #define IMX8MP_CLK_AUDIO_AXI 310 #define IMX8MP_CLK_HSIO_AXI 311 #define IMX8MP_CLK_MEDIA_ISP 312 +#define IMX8MP_CLK_MEDIA_DISP2_PIX 313 +#define IMX8MP_CLK_CLKOUT1_SEL 314 +#define IMX8MP_CLK_CLKOUT1_DIV 315 +#define IMX8MP_CLK_CLKOUT1 316 +#define IMX8MP_CLK_CLKOUT2_SEL 317 +#define IMX8MP_CLK_CLKOUT2_DIV 318 +#define IMX8MP_CLK_CLKOUT2 319 -#define IMX8MP_CLK_END 313 +#define IMX8MP_CLK_END 320 #define IMX8MP_CLK_AUDIOMIX_SAI1_IPG 0 #define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1 1 diff --git a/dts/include/dt-bindings/clock/mt8186-clk.h b/dts/include/dt-bindings/clock/mt8186-clk.h new file mode 100644 index 0000000000..a70bf67af4 --- /dev/null +++ b/dts/include/dt-bindings/clock/mt8186-clk.h @@ -0,0 +1,445 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */ +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Chun-Jie Chen + */ + +#ifndef _DT_BINDINGS_CLK_MT8186_H +#define _DT_BINDINGS_CLK_MT8186_H + +/* MCUSYS */ + +#define CLK_MCU_ARMPLL_LL_SEL 0 +#define CLK_MCU_ARMPLL_BL_SEL 1 +#define CLK_MCU_ARMPLL_BUS_SEL 2 +#define CLK_MCU_NR_CLK 3 + +/* TOPCKGEN */ + +#define CLK_TOP_AXI 0 +#define CLK_TOP_SCP 1 +#define CLK_TOP_MFG 2 +#define CLK_TOP_CAMTG 3 +#define CLK_TOP_CAMTG1 4 +#define CLK_TOP_CAMTG2 5 +#define CLK_TOP_CAMTG3 6 +#define CLK_TOP_CAMTG4 7 +#define CLK_TOP_CAMTG5 8 +#define CLK_TOP_CAMTG6 9 +#define CLK_TOP_UART 10 +#define CLK_TOP_SPI 11 +#define CLK_TOP_MSDC50_0_HCLK 12 +#define CLK_TOP_MSDC50_0 13 +#define CLK_TOP_MSDC30_1 14 +#define CLK_TOP_AUDIO 15 +#define CLK_TOP_AUD_INTBUS 16 +#define CLK_TOP_AUD_1 17 +#define CLK_TOP_AUD_2 18 +#define CLK_TOP_AUD_ENGEN1 19 +#define CLK_TOP_AUD_ENGEN2 20 +#define CLK_TOP_DISP_PWM 21 +#define CLK_TOP_SSPM 22 +#define CLK_TOP_DXCC 23 +#define CLK_TOP_USB_TOP 24 +#define CLK_TOP_SRCK 25 +#define CLK_TOP_SPM 26 +#define CLK_TOP_I2C 27 +#define CLK_TOP_PWM 28 +#define CLK_TOP_SENINF 29 +#define CLK_TOP_SENINF1 30 +#define CLK_TOP_SENINF2 31 +#define CLK_TOP_SENINF3 32 +#define CLK_TOP_AES_MSDCFDE 33 +#define CLK_TOP_PWRAP_ULPOSC 34 +#define CLK_TOP_CAMTM 35 +#define CLK_TOP_VENC 36 +#define CLK_TOP_CAM 37 +#define CLK_TOP_IMG1 38 +#define CLK_TOP_IPE 39 +#define CLK_TOP_DPMAIF 40 +#define CLK_TOP_VDEC 41 +#define CLK_TOP_DISP 42 +#define CLK_TOP_MDP 43 +#define CLK_TOP_AUDIO_H 44 +#define CLK_TOP_UFS 45 +#define CLK_TOP_AES_FDE 46 +#define CLK_TOP_AUDIODSP 47 +#define CLK_TOP_DVFSRC 48 +#define CLK_TOP_DSI_OCC 49 +#define CLK_TOP_SPMI_MST 50 +#define CLK_TOP_SPINOR 51 +#define CLK_TOP_NNA 52 +#define CLK_TOP_NNA1 53 +#define CLK_TOP_NNA2 54 +#define CLK_TOP_SSUSB_XHCI 55 +#define CLK_TOP_SSUSB_TOP_1P 56 +#define CLK_TOP_SSUSB_XHCI_1P 57 +#define CLK_TOP_WPE 58 +#define CLK_TOP_DPI 59 +#define CLK_TOP_U3_OCC_250M 60 +#define CLK_TOP_U3_OCC_500M 61 +#define CLK_TOP_ADSP_BUS 62 +#define CLK_TOP_APLL_I2S0_MCK_SEL 63 +#define CLK_TOP_APLL_I2S1_MCK_SEL 64 +#define CLK_TOP_APLL_I2S2_MCK_SEL 65 +#define CLK_TOP_APLL_I2S4_MCK_SEL 66 +#define CLK_TOP_APLL_TDMOUT_MCK_SEL 67 +#define CLK_TOP_MAINPLL_D2 68 +#define CLK_TOP_MAINPLL_D2_D2 69 +#define CLK_TOP_MAINPLL_D2_D4 70 +#define CLK_TOP_MAINPLL_D2_D16 71 +#define CLK_TOP_MAINPLL_D3 72 +#define CLK_TOP_MAINPLL_D3_D2 73 +#define CLK_TOP_MAINPLL_D3_D4 74 +#define CLK_TOP_MAINPLL_D5 75 +#define CLK_TOP_MAINPLL_D5_D2 76 +#define CLK_TOP_MAINPLL_D5_D4 77 +#define CLK_TOP_MAINPLL_D7 78 +#define CLK_TOP_MAINPLL_D7_D2 79 +#define CLK_TOP_MAINPLL_D7_D4 80 +#define CLK_TOP_UNIVPLL 81 +#define CLK_TOP_UNIVPLL_D2 82 +#define CLK_TOP_UNIVPLL_D2_D2 83 +#define CLK_TOP_UNIVPLL_D2_D4 84 +#define CLK_TOP_UNIVPLL_D3 85 +#define CLK_TOP_UNIVPLL_D3_D2 86 +#define CLK_TOP_UNIVPLL_D3_D4 87 +#define CLK_TOP_UNIVPLL_D3_D8 88 +#define CLK_TOP_UNIVPLL_D3_D32 89 +#define CLK_TOP_UNIVPLL_D5 90 +#define CLK_TOP_UNIVPLL_D5_D2 91 +#define CLK_TOP_UNIVPLL_D5_D4 92 +#define CLK_TOP_UNIVPLL_D7 93 +#define CLK_TOP_UNIVPLL_192M 94 +#define CLK_TOP_UNIVPLL_192M_D4 95 +#define CLK_TOP_UNIVPLL_192M_D8 96 +#define CLK_TOP_UNIVPLL_192M_D16 97 +#define CLK_TOP_UNIVPLL_192M_D32 98 +#define CLK_TOP_APLL1_D2 99 +#define CLK_TOP_APLL1_D4 100 +#define CLK_TOP_APLL1_D8 101 +#define CLK_TOP_APLL2_D2 102 +#define CLK_TOP_APLL2_D4 103 +#define CLK_TOP_APLL2_D8 104 +#define CLK_TOP_MMPLL_D2 105 +#define CLK_TOP_TVDPLL_D2 106 +#define CLK_TOP_TVDPLL_D4 107 +#define CLK_TOP_TVDPLL_D8 108 +#define CLK_TOP_TVDPLL_D16 109 +#define CLK_TOP_TVDPLL_D32 110 +#define CLK_TOP_MSDCPLL_D2 111 +#define CLK_TOP_ULPOSC1 112 +#define CLK_TOP_ULPOSC1_D2 113 +#define CLK_TOP_ULPOSC1_D4 114 +#define CLK_TOP_ULPOSC1_D8 115 +#define CLK_TOP_ULPOSC1_D10 116 +#define CLK_TOP_ULPOSC1_D16 117 +#define CLK_TOP_ULPOSC1_D32 118 +#define CLK_TOP_ADSPPLL_D2 119 +#define CLK_TOP_ADSPPLL_D4 120 +#define CLK_TOP_ADSPPLL_D8 121 +#define CLK_TOP_NNAPLL_D2 122 +#define CLK_TOP_NNAPLL_D4 123 +#define CLK_TOP_NNAPLL_D8 124 +#define CLK_TOP_NNA2PLL_D2 125 +#define CLK_TOP_NNA2PLL_D4 126 +#define CLK_TOP_NNA2PLL_D8 127 +#define CLK_TOP_F_BIST2FPC 128 +#define CLK_TOP_466M_FMEM 129 +#define CLK_TOP_MPLL 130 +#define CLK_TOP_APLL12_CK_DIV0 131 +#define CLK_TOP_APLL12_CK_DIV1 132 +#define CLK_TOP_APLL12_CK_DIV2 133 +#define CLK_TOP_APLL12_CK_DIV4 134 +#define CLK_TOP_APLL12_CK_DIV_TDMOUT_M 135 +#define CLK_TOP_NR_CLK 136 + +/* INFRACFG_AO */ + +#define CLK_INFRA_AO_PMIC_TMR 0 +#define CLK_INFRA_AO_PMIC_AP 1 +#define CLK_INFRA_AO_PMIC_MD 2 +#define CLK_INFRA_AO_PMIC_CONN 3 +#define CLK_INFRA_AO_SCP_CORE 4 +#define CLK_INFRA_AO_SEJ 5 +#define CLK_INFRA_AO_APXGPT 6 +#define CLK_INFRA_AO_ICUSB 7 +#define CLK_INFRA_AO_GCE 8 +#define CLK_INFRA_AO_THERM 9 +#define CLK_INFRA_AO_I2C_AP 10 +#define CLK_INFRA_AO_I2C_CCU 11 +#define CLK_INFRA_AO_I2C_SSPM 12 +#define CLK_INFRA_AO_I2C_RSV 13 +#define CLK_INFRA_AO_PWM_HCLK 14 +#define CLK_INFRA_AO_PWM1 15 +#define CLK_INFRA_AO_PWM2 16 +#define CLK_INFRA_AO_PWM3 17 +#define CLK_INFRA_AO_PWM4 18 +#define CLK_INFRA_AO_PWM5 19 +#define CLK_INFRA_AO_PWM 20 +#define CLK_INFRA_AO_UART0 21 +#define CLK_INFRA_AO_UART1 22 +#define CLK_INFRA_AO_UART2 23 +#define CLK_INFRA_AO_GCE_26M 24 +#define CLK_INFRA_AO_CQ_DMA_FPC 25 +#define CLK_INFRA_AO_BTIF 26 +#define CLK_INFRA_AO_SPI0 27 +#define CLK_INFRA_AO_MSDC0 28 +#define CLK_INFRA_AO_MSDCFDE 29 +#define CLK_INFRA_AO_MSDC1 30 +#define CLK_INFRA_AO_DVFSRC 31 +#define CLK_INFRA_AO_GCPU 32 +#define CLK_INFRA_AO_TRNG 33 +#define CLK_INFRA_AO_AUXADC 34 +#define CLK_INFRA_AO_CPUM 35 +#define CLK_INFRA_AO_CCIF1_AP 36 +#define CLK_INFRA_AO_CCIF1_MD 37 +#define CLK_INFRA_AO_AUXADC_MD 38 +#define CLK_INFRA_AO_AP_DMA 39 +#define CLK_INFRA_AO_XIU 40 +#define CLK_INFRA_AO_DEVICE_APC 41 +#define CLK_INFRA_AO_CCIF_AP 42 +#define CLK_INFRA_AO_DEBUGTOP 43 +#define CLK_INFRA_AO_AUDIO 44 +#define CLK_INFRA_AO_CCIF_MD 45 +#define CLK_INFRA_AO_DXCC_SEC_CORE 46 +#define CLK_INFRA_AO_DXCC_AO 47 +#define CLK_INFRA_AO_IMP_IIC 48 +#define CLK_INFRA_AO_DRAMC_F26M 49 +#define CLK_INFRA_AO_RG_PWM_FBCLK6 50 +#define CLK_INFRA_AO_SSUSB_TOP_HCLK 51 +#define CLK_INFRA_AO_DISP_PWM 52 +#define CLK_INFRA_AO_CLDMA_BCLK 53 +#define CLK_INFRA_AO_AUDIO_26M_BCLK 54 +#define CLK_INFRA_AO_SSUSB_TOP_P1_HCLK 55 +#define CLK_INFRA_AO_SPI1 56 +#define CLK_INFRA_AO_I2C4 57 +#define CLK_INFRA_AO_MODEM_TEMP_SHARE 58 +#define CLK_INFRA_AO_SPI2 59 +#define CLK_INFRA_AO_SPI3 60 +#define CLK_INFRA_AO_SSUSB_TOP_REF 61 +#define CLK_INFRA_AO_SSUSB_TOP_XHCI 62 +#define CLK_INFRA_AO_SSUSB_TOP_P1_REF 63 +#define CLK_INFRA_AO_SSUSB_TOP_P1_XHCI 64 +#define CLK_INFRA_AO_SSPM 65 +#define CLK_INFRA_AO_SSUSB_TOP_P1_SYS 66 +#define CLK_INFRA_AO_I2C5 67 +#define CLK_INFRA_AO_I2C5_ARBITER 68 +#define CLK_INFRA_AO_I2C5_IMM 69 +#define CLK_INFRA_AO_I2C1_ARBITER 70 +#define CLK_INFRA_AO_I2C1_IMM 71 +#define CLK_INFRA_AO_I2C2_ARBITER 72 +#define CLK_INFRA_AO_I2C2_IMM 73 +#define CLK_INFRA_AO_SPI4 74 +#define CLK_INFRA_AO_SPI5 75 +#define CLK_INFRA_AO_CQ_DMA 76 +#define CLK_INFRA_AO_BIST2FPC 77 +#define CLK_INFRA_AO_MSDC0_SELF 78 +#define CLK_INFRA_AO_SPINOR 79 +#define CLK_INFRA_AO_SSPM_26M_SELF 80 +#define CLK_INFRA_AO_SSPM_32K_SELF 81 +#define CLK_INFRA_AO_I2C6 82 +#define CLK_INFRA_AO_AP_MSDC0 83 +#define CLK_INFRA_AO_MD_MSDC0 84 +#define CLK_INFRA_AO_MSDC0_SRC 85 +#define CLK_INFRA_AO_MSDC1_SRC 86 +#define CLK_INFRA_AO_SEJ_F13M 87 +#define CLK_INFRA_AO_AES_TOP0_BCLK 88 +#define CLK_INFRA_AO_MCU_PM_BCLK 89 +#define CLK_INFRA_AO_CCIF2_AP 90 +#define CLK_INFRA_AO_CCIF2_MD 91 +#define CLK_INFRA_AO_CCIF3_AP 92 +#define CLK_INFRA_AO_CCIF3_MD 93 +#define CLK_INFRA_AO_FADSP_26M 94 +#define CLK_INFRA_AO_FADSP_32K 95 +#define CLK_INFRA_AO_CCIF4_AP 96 +#define CLK_INFRA_AO_CCIF4_MD 97 +#define CLK_INFRA_AO_FADSP 98 +#define CLK_INFRA_AO_FLASHIF_133M 99 +#define CLK_INFRA_AO_FLASHIF_66M 100 +#define CLK_INFRA_AO_NR_CLK 101 + +/* APMIXEDSYS */ + +#define CLK_APMIXED_ARMPLL_LL 0 +#define CLK_APMIXED_ARMPLL_BL 1 +#define CLK_APMIXED_CCIPLL 2 +#define CLK_APMIXED_MAINPLL 3 +#define CLK_APMIXED_UNIV2PLL 4 +#define CLK_APMIXED_MSDCPLL 5 +#define CLK_APMIXED_MMPLL 6 +#define CLK_APMIXED_NNAPLL 7 +#define CLK_APMIXED_NNA2PLL 8 +#define CLK_APMIXED_ADSPPLL 9 +#define CLK_APMIXED_MFGPLL 10 +#define CLK_APMIXED_TVDPLL 11 +#define CLK_APMIXED_APLL1 12 +#define CLK_APMIXED_APLL2 13 +#define CLK_APMIXED_NR_CLK 14 + +/* IMP_IIC_WRAP */ + +#define CLK_IMP_IIC_WRAP_AP_CLOCK_I2C0 0 +#define CLK_IMP_IIC_WRAP_AP_CLOCK_I2C1 1 +#define CLK_IMP_IIC_WRAP_AP_CLOCK_I2C2 2 +#define CLK_IMP_IIC_WRAP_AP_CLOCK_I2C3 3 +#define CLK_IMP_IIC_WRAP_AP_CLOCK_I2C4 4 +#define CLK_IMP_IIC_WRAP_AP_CLOCK_I2C5 5 +#define CLK_IMP_IIC_WRAP_AP_CLOCK_I2C6 6 +#define CLK_IMP_IIC_WRAP_AP_CLOCK_I2C7 7 +#define CLK_IMP_IIC_WRAP_AP_CLOCK_I2C8 8 +#define CLK_IMP_IIC_WRAP_AP_CLOCK_I2C9 9 +#define CLK_IMP_IIC_WRAP_NR_CLK 10 + +/* MFGCFG */ + +#define CLK_MFG_BG3D 0 +#define CLK_MFG_NR_CLK 1 + +/* MMSYS */ + +#define CLK_MM_DISP_MUTEX0 0 +#define CLK_MM_APB_MM_BUS 1 +#define CLK_MM_DISP_OVL0 2 +#define CLK_MM_DISP_RDMA0 3 +#define CLK_MM_DISP_OVL0_2L 4 +#define CLK_MM_DISP_WDMA0 5 +#define CLK_MM_DISP_RSZ0 6 +#define CLK_MM_DISP_AAL0 7 +#define CLK_MM_DISP_CCORR0 8 +#define CLK_MM_DISP_COLOR0 9 +#define CLK_MM_SMI_INFRA 10 +#define CLK_MM_DISP_DSC_WRAP0 11 +#define CLK_MM_DISP_GAMMA0 12 +#define CLK_MM_DISP_POSTMASK0 13 +#define CLK_MM_DISP_DITHER0 14 +#define CLK_MM_SMI_COMMON 15 +#define CLK_MM_DSI0 16 +#define CLK_MM_DISP_FAKE_ENG0 17 +#define CLK_MM_DISP_FAKE_ENG1 18 +#define CLK_MM_SMI_GALS 19 +#define CLK_MM_SMI_IOMMU 20 +#define CLK_MM_DISP_RDMA1 21 +#define CLK_MM_DISP_DPI 22 +#define CLK_MM_DSI0_DSI_CK_DOMAIN 23 +#define CLK_MM_DISP_26M 24 +#define CLK_MM_NR_CLK 25 + +/* WPESYS */ + +#define CLK_WPE_CK_EN 0 +#define CLK_WPE_SMI_LARB8_CK_EN 1 +#define CLK_WPE_SYS_EVENT_TX_CK_EN 2 +#define CLK_WPE_SMI_LARB8_PCLK_EN 3 +#define CLK_WPE_NR_CLK 4 + +/* IMGSYS1 */ + +#define CLK_IMG1_LARB9_IMG1 0 +#define CLK_IMG1_LARB10_IMG1 1 +#define CLK_IMG1_DIP 2 +#define CLK_IMG1_GALS_IMG1 3 +#define CLK_IMG1_NR_CLK 4 + +/* IMGSYS2 */ + +#define CLK_IMG2_LARB9_IMG2 0 +#define CLK_IMG2_LARB10_IMG2 1 +#define CLK_IMG2_MFB 2 +#define CLK_IMG2_WPE 3 +#define CLK_IMG2_MSS 4 +#define CLK_IMG2_GALS_IMG2 5 +#define CLK_IMG2_NR_CLK 6 + +/* VDECSYS */ + +#define CLK_VDEC_LARB1_CKEN 0 +#define CLK_VDEC_LAT_CKEN 1 +#define CLK_VDEC_LAT_ACTIVE 2 +#define CLK_VDEC_LAT_CKEN_ENG 3 +#define CLK_VDEC_MINI_MDP_CKEN_CFG_RG 4 +#define CLK_VDEC_CKEN 5 +#define CLK_VDEC_ACTIVE 6 +#define CLK_VDEC_CKEN_ENG 7 +#define CLK_VDEC_NR_CLK 8 + +/* VENCSYS */ + +#define CLK_VENC_CKE0_LARB 0 +#define CLK_VENC_CKE1_VENC 1 +#define CLK_VENC_CKE2_JPGENC 2 +#define CLK_VENC_CKE5_GALS 3 +#define CLK_VENC_NR_CLK 4 + +/* CAMSYS */ + +#define CLK_CAM_LARB13 0 +#define CLK_CAM_DFP_VAD 1 +#define CLK_CAM_LARB14 2 +#define CLK_CAM 3 +#define CLK_CAMTG 4 +#define CLK_CAM_SENINF 5 +#define CLK_CAMSV1 6 +#define CLK_CAMSV2 7 +#define CLK_CAMSV3 8 +#define CLK_CAM_CCU0 9 +#define CLK_CAM_CCU1 10 +#define CLK_CAM_MRAW0 11 +#define CLK_CAM_FAKE_ENG 12 +#define CLK_CAM_CCU_GALS 13 +#define CLK_CAM2MM_GALS 14 +#define CLK_CAM_NR_CLK 15 + +/* CAMSYS_RAWA */ + +#define CLK_CAM_RAWA_LARBX_RAWA 0 +#define CLK_CAM_RAWA 1 +#define CLK_CAM_RAWA_CAMTG_RAWA 2 +#define CLK_CAM_RAWA_NR_CLK 3 + +/* CAMSYS_RAWB */ + +#define CLK_CAM_RAWB_LARBX_RAWB 0 +#define CLK_CAM_RAWB 1 +#define CLK_CAM_RAWB_CAMTG_RAWB 2 +#define CLK_CAM_RAWB_NR_CLK 3 + +/* MDPSYS */ + +#define CLK_MDP_RDMA0 0 +#define CLK_MDP_TDSHP0 1 +#define CLK_MDP_IMG_DL_ASYNC0 2 +#define CLK_MDP_IMG_DL_ASYNC1 3 +#define CLK_MDP_DISP_RDMA 4 +#define CLK_MDP_HMS 5 +#define CLK_MDP_SMI0 6 +#define CLK_MDP_APB_BUS 7 +#define CLK_MDP_WROT0 8 +#define CLK_MDP_RSZ0 9 +#define CLK_MDP_HDR0 10 +#define CLK_MDP_MUTEX0 11 +#define CLK_MDP_WROT1 12 +#define CLK_MDP_RSZ1 13 +#define CLK_MDP_FAKE_ENG0 14 +#define CLK_MDP_AAL0 15 +#define CLK_MDP_DISP_WDMA 16 +#define CLK_MDP_COLOR 17 +#define CLK_MDP_IMG_DL_ASYNC2 18 +#define CLK_MDP_IMG_DL_RELAY0_ASYNC0 19 +#define CLK_MDP_IMG_DL_RELAY1_ASYNC1 20 +#define CLK_MDP_IMG_DL_RELAY2_ASYNC2 21 +#define CLK_MDP_NR_CLK 22 + +/* IPESYS */ + +#define CLK_IPE_LARB19 0 +#define CLK_IPE_LARB20 1 +#define CLK_IPE_SMI_SUBCOM 2 +#define CLK_IPE_FD 3 +#define CLK_IPE_FE 4 +#define CLK_IPE_RSC 5 +#define CLK_IPE_DPE 6 +#define CLK_IPE_GALS_IPE 7 +#define CLK_IPE_NR_CLK 8 + +#endif /* _DT_BINDINGS_CLK_MT8186_H */ diff --git a/dts/include/dt-bindings/clock/qcom,gcc-msm8976.h b/dts/include/dt-bindings/clock/qcom,gcc-msm8976.h index 51955fd494..5351f48b20 100644 --- a/dts/include/dt-bindings/clock/qcom,gcc-msm8976.h +++ b/dts/include/dt-bindings/clock/qcom,gcc-msm8976.h @@ -224,6 +224,7 @@ #define RST_CAMSS_CSI_VFE1_BCR 7 #define RST_CAMSS_VFE1_BCR 8 #define RST_CAMSS_CPP_BCR 9 +#define RST_MSS_BCR 10 /* GDSCs */ #define VENUS_GDSC 0 diff --git a/dts/include/dt-bindings/clock/qcom,gcc-msm8998.h b/dts/include/dt-bindings/clock/qcom,gcc-msm8998.h index 72c99e486d..1badb4f9c5 100644 --- a/dts/include/dt-bindings/clock/qcom,gcc-msm8998.h +++ b/dts/include/dt-bindings/clock/qcom,gcc-msm8998.h @@ -186,6 +186,10 @@ #define UFS_UNIPRO_CORE_CLK_SRC 177 #define GCC_MMSS_GPLL0_CLK 178 #define HMSS_GPLL0_CLK_SRC 179 +#define GCC_IM_SLEEP 180 +#define AGGRE2_SNOC_NORTH_AXI 181 +#define SSC_XO 182 +#define SSC_CNOC_AHBS_CLK 183 #define PCIE_0_GDSC 0 #define UFS_GDSC 1 diff --git a/dts/include/dt-bindings/clock/qcom,gcc-sc8280xp.h b/dts/include/dt-bindings/clock/qcom,gcc-sc8280xp.h new file mode 100644 index 0000000000..cb2fb63882 --- /dev/null +++ b/dts/include/dt-bindings/clock/qcom,gcc-sc8280xp.h @@ -0,0 +1,496 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Ltd. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_DIREWOLF_H +#define _DT_BINDINGS_CLK_QCOM_GCC_DIREWOLF_H + +/* GCC clocks */ +#define GCC_GPLL0 0 +#define GCC_GPLL0_OUT_EVEN 1 +#define GCC_GPLL2 2 +#define GCC_GPLL4 3 +#define GCC_GPLL7 4 +#define GCC_GPLL8 5 +#define GCC_GPLL9 6 +#define GCC_AGGRE_NOC_PCIE0_TUNNEL_AXI_CLK 7 +#define GCC_AGGRE_NOC_PCIE1_TUNNEL_AXI_CLK 8 +#define GCC_AGGRE_NOC_PCIE_4_AXI_CLK 9 +#define GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK 10 +#define GCC_AGGRE_UFS_CARD_AXI_CLK 11 +#define GCC_AGGRE_UFS_PHY_AXI_CLK 12 +#define GCC_AGGRE_USB3_MP_AXI_CLK 13 +#define GCC_AGGRE_USB3_PRIM_AXI_CLK 14 +#define GCC_AGGRE_USB3_SEC_AXI_CLK 15 +#define GCC_AGGRE_USB4_1_AXI_CLK 16 +#define GCC_AGGRE_USB4_AXI_CLK 17 +#define GCC_AGGRE_USB_NOC_AXI_CLK 18 +#define GCC_AGGRE_USB_NOC_NORTH_AXI_CLK 19 +#define GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK 20 +#define GCC_AHB2PHY0_CLK 21 +#define GCC_AHB2PHY2_CLK 22 +#define GCC_BOOT_ROM_AHB_CLK 23 +#define GCC_CAMERA_AHB_CLK 24 +#define GCC_CAMERA_HF_AXI_CLK 25 +#define GCC_CAMERA_SF_AXI_CLK 26 +#define GCC_CAMERA_THROTTLE_NRT_AXI_CLK 27 +#define GCC_CAMERA_THROTTLE_RT_AXI_CLK 28 +#define GCC_CAMERA_THROTTLE_XO_CLK 29 +#define GCC_CAMERA_XO_CLK 30 +#define GCC_CFG_NOC_USB3_MP_AXI_CLK 31 +#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 32 +#define GCC_CFG_NOC_USB3_SEC_AXI_CLK 33 +#define GCC_CNOC_PCIE0_TUNNEL_CLK 34 +#define GCC_CNOC_PCIE1_TUNNEL_CLK 35 +#define GCC_CNOC_PCIE4_QX_CLK 36 +#define GCC_DDRSS_GPU_AXI_CLK 37 +#define GCC_DDRSS_PCIE_SF_TBU_CLK 38 +#define GCC_DISP1_AHB_CLK 39 +#define GCC_DISP1_HF_AXI_CLK 40 +#define GCC_DISP1_SF_AXI_CLK 41 +#define GCC_DISP1_THROTTLE_NRT_AXI_CLK 42 +#define GCC_DISP1_THROTTLE_RT_AXI_CLK 43 +#define GCC_DISP1_XO_CLK 44 +#define GCC_DISP_AHB_CLK 45 +#define GCC_DISP_HF_AXI_CLK 46 +#define GCC_DISP_SF_AXI_CLK 47 +#define GCC_DISP_THROTTLE_NRT_AXI_CLK 48 +#define GCC_DISP_THROTTLE_RT_AXI_CLK 49 +#define GCC_DISP_XO_CLK 50 +#define GCC_EMAC0_AXI_CLK 51 +#define GCC_EMAC0_PTP_CLK 52 +#define GCC_EMAC0_PTP_CLK_SRC 53 +#define GCC_EMAC0_RGMII_CLK 54 +#define GCC_EMAC0_RGMII_CLK_SRC 55 +#define GCC_EMAC0_SLV_AHB_CLK 56 +#define GCC_EMAC1_AXI_CLK 57 +#define GCC_EMAC1_PTP_CLK 58 +#define GCC_EMAC1_PTP_CLK_SRC 59 +#define GCC_EMAC1_RGMII_CLK 60 +#define GCC_EMAC1_RGMII_CLK_SRC 61 +#define GCC_EMAC1_SLV_AHB_CLK 62 +#define GCC_GP1_CLK 63 +#define GCC_GP1_CLK_SRC 64 +#define GCC_GP2_CLK 65 +#define GCC_GP2_CLK_SRC 66 +#define GCC_GP3_CLK 67 +#define GCC_GP3_CLK_SRC 68 +#define GCC_GP4_CLK 69 +#define GCC_GP4_CLK_SRC 70 +#define GCC_GP5_CLK 71 +#define GCC_GP5_CLK_SRC 72 +#define GCC_GPU_CFG_AHB_CLK 73 +#define GCC_GPU_GPLL0_CLK_SRC 74 +#define GCC_GPU_GPLL0_DIV_CLK_SRC 75 +#define GCC_GPU_IREF_EN 76 +#define GCC_GPU_MEMNOC_GFX_CLK 77 +#define GCC_GPU_SNOC_DVM_GFX_CLK 78 +#define GCC_GPU_TCU_THROTTLE_AHB_CLK 79 +#define GCC_GPU_TCU_THROTTLE_CLK 80 +#define GCC_PCIE0_PHY_RCHNG_CLK 81 +#define GCC_PCIE1_PHY_RCHNG_CLK 82 +#define GCC_PCIE2A_PHY_RCHNG_CLK 83 +#define GCC_PCIE2B_PHY_RCHNG_CLK 84 +#define GCC_PCIE3A_PHY_RCHNG_CLK 85 +#define GCC_PCIE3B_PHY_RCHNG_CLK 86 +#define GCC_PCIE4_PHY_RCHNG_CLK 87 +#define GCC_PCIE_0_AUX_CLK 88 +#define GCC_PCIE_0_AUX_CLK_SRC 89 +#define GCC_PCIE_0_CFG_AHB_CLK 90 +#define GCC_PCIE_0_MSTR_AXI_CLK 91 +#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC 92 +#define GCC_PCIE_0_PIPE_CLK 93 +#define GCC_PCIE_0_SLV_AXI_CLK 94 +#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 95 +#define GCC_PCIE_1_AUX_CLK 96 +#define GCC_PCIE_1_AUX_CLK_SRC 97 +#define GCC_PCIE_1_CFG_AHB_CLK 98 +#define GCC_PCIE_1_MSTR_AXI_CLK 99 +#define GCC_PCIE_1_PHY_RCHNG_CLK_SRC 100 +#define GCC_PCIE_1_PIPE_CLK 101 +#define GCC_PCIE_1_SLV_AXI_CLK 102 +#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 103 +#define GCC_PCIE_2A2B_CLKREF_CLK 104 +#define GCC_PCIE_2A_AUX_CLK 105 +#define GCC_PCIE_2A_AUX_CLK_SRC 106 +#define GCC_PCIE_2A_CFG_AHB_CLK 107 +#define GCC_PCIE_2A_MSTR_AXI_CLK 108 +#define GCC_PCIE_2A_PHY_RCHNG_CLK_SRC 109 +#define GCC_PCIE_2A_PIPE_CLK 110 +#define GCC_PCIE_2A_PIPE_CLK_SRC 111 +#define GCC_PCIE_2A_PIPE_DIV_CLK_SRC 112 +#define GCC_PCIE_2A_PIPEDIV2_CLK 113 +#define GCC_PCIE_2A_SLV_AXI_CLK 114 +#define GCC_PCIE_2A_SLV_Q2A_AXI_CLK 115 +#define GCC_PCIE_2B_AUX_CLK 116 +#define GCC_PCIE_2B_AUX_CLK_SRC 117 +#define GCC_PCIE_2B_CFG_AHB_CLK 118 +#define GCC_PCIE_2B_MSTR_AXI_CLK 119 +#define GCC_PCIE_2B_PHY_RCHNG_CLK_SRC 120 +#define GCC_PCIE_2B_PIPE_CLK 121 +#define GCC_PCIE_2B_PIPE_CLK_SRC 122 +#define GCC_PCIE_2B_PIPE_DIV_CLK_SRC 123 +#define GCC_PCIE_2B_PIPEDIV2_CLK 124 +#define GCC_PCIE_2B_SLV_AXI_CLK 125 +#define GCC_PCIE_2B_SLV_Q2A_AXI_CLK 126 +#define GCC_PCIE_3A3B_CLKREF_CLK 127 +#define GCC_PCIE_3A_AUX_CLK 128 +#define GCC_PCIE_3A_AUX_CLK_SRC 129 +#define GCC_PCIE_3A_CFG_AHB_CLK 130 +#define GCC_PCIE_3A_MSTR_AXI_CLK 131 +#define GCC_PCIE_3A_PHY_RCHNG_CLK_SRC 132 +#define GCC_PCIE_3A_PIPE_CLK 133 +#define GCC_PCIE_3A_PIPE_CLK_SRC 134 +#define GCC_PCIE_3A_PIPE_DIV_CLK_SRC 135 +#define GCC_PCIE_3A_PIPEDIV2_CLK 136 +#define GCC_PCIE_3A_SLV_AXI_CLK 137 +#define GCC_PCIE_3A_SLV_Q2A_AXI_CLK 138 +#define GCC_PCIE_3B_AUX_CLK 139 +#define GCC_PCIE_3B_AUX_CLK_SRC 140 +#define GCC_PCIE_3B_CFG_AHB_CLK 141 +#define GCC_PCIE_3B_MSTR_AXI_CLK 142 +#define GCC_PCIE_3B_PHY_RCHNG_CLK_SRC 143 +#define GCC_PCIE_3B_PIPE_CLK 144 +#define GCC_PCIE_3B_PIPE_CLK_SRC 145 +#define GCC_PCIE_3B_PIPE_DIV_CLK_SRC 146 +#define GCC_PCIE_3B_PIPEDIV2_CLK 147 +#define GCC_PCIE_3B_SLV_AXI_CLK 148 +#define GCC_PCIE_3B_SLV_Q2A_AXI_CLK 149 +#define GCC_PCIE_4_AUX_CLK 150 +#define GCC_PCIE_4_AUX_CLK_SRC 151 +#define GCC_PCIE_4_CFG_AHB_CLK 152 +#define GCC_PCIE_4_CLKREF_CLK 153 +#define GCC_PCIE_4_MSTR_AXI_CLK 154 +#define GCC_PCIE_4_PHY_RCHNG_CLK_SRC 155 +#define GCC_PCIE_4_PIPE_CLK 156 +#define GCC_PCIE_4_PIPE_CLK_SRC 157 +#define GCC_PCIE_4_PIPE_DIV_CLK_SRC 158 +#define GCC_PCIE_4_PIPEDIV2_CLK 159 +#define GCC_PCIE_4_SLV_AXI_CLK 160 +#define GCC_PCIE_4_SLV_Q2A_AXI_CLK 161 +#define GCC_PCIE_RSCC_AHB_CLK 162 +#define GCC_PCIE_RSCC_XO_CLK 163 +#define GCC_PCIE_RSCC_XO_CLK_SRC 164 +#define GCC_PCIE_THROTTLE_CFG_CLK 165 +#define GCC_PDM2_CLK 166 +#define GCC_PDM2_CLK_SRC 167 +#define GCC_PDM_AHB_CLK 168 +#define GCC_PDM_XO4_CLK 169 +#define GCC_QMIP_CAMERA_NRT_AHB_CLK 170 +#define GCC_QMIP_CAMERA_RT_AHB_CLK 171 +#define GCC_QMIP_DISP1_AHB_CLK 172 +#define GCC_QMIP_DISP1_ROT_AHB_CLK 173 +#define GCC_QMIP_DISP_AHB_CLK 174 +#define GCC_QMIP_DISP_ROT_AHB_CLK 175 +#define GCC_QMIP_VIDEO_CVP_AHB_CLK 176 +#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 177 +#define GCC_QUPV3_WRAP0_CORE_2X_CLK 178 +#define GCC_QUPV3_WRAP0_CORE_CLK 179 +#define GCC_QUPV3_WRAP0_QSPI0_CLK 180 +#define GCC_QUPV3_WRAP0_S0_CLK 181 +#define GCC_QUPV3_WRAP0_S0_CLK_SRC 182 +#define GCC_QUPV3_WRAP0_S1_CLK 183 +#define GCC_QUPV3_WRAP0_S1_CLK_SRC 184 +#define GCC_QUPV3_WRAP0_S2_CLK 185 +#define GCC_QUPV3_WRAP0_S2_CLK_SRC 186 +#define GCC_QUPV3_WRAP0_S3_CLK 187 +#define GCC_QUPV3_WRAP0_S3_CLK_SRC 188 +#define GCC_QUPV3_WRAP0_S4_CLK 189 +#define GCC_QUPV3_WRAP0_S4_CLK_SRC 190 +#define GCC_QUPV3_WRAP0_S4_DIV_CLK_SRC 191 +#define GCC_QUPV3_WRAP0_S5_CLK 192 +#define GCC_QUPV3_WRAP0_S5_CLK_SRC 193 +#define GCC_QUPV3_WRAP0_S6_CLK 194 +#define GCC_QUPV3_WRAP0_S6_CLK_SRC 195 +#define GCC_QUPV3_WRAP0_S7_CLK 196 +#define GCC_QUPV3_WRAP0_S7_CLK_SRC 197 +#define GCC_QUPV3_WRAP1_CORE_2X_CLK 198 +#define GCC_QUPV3_WRAP1_CORE_CLK 199 +#define GCC_QUPV3_WRAP1_QSPI0_CLK 200 +#define GCC_QUPV3_WRAP1_S0_CLK 201 +#define GCC_QUPV3_WRAP1_S0_CLK_SRC 202 +#define GCC_QUPV3_WRAP1_S1_CLK 203 +#define GCC_QUPV3_WRAP1_S1_CLK_SRC 204 +#define GCC_QUPV3_WRAP1_S2_CLK 205 +#define GCC_QUPV3_WRAP1_S2_CLK_SRC 206 +#define GCC_QUPV3_WRAP1_S3_CLK 207 +#define GCC_QUPV3_WRAP1_S3_CLK_SRC 208 +#define GCC_QUPV3_WRAP1_S4_CLK 209 +#define GCC_QUPV3_WRAP1_S4_CLK_SRC 210 +#define GCC_QUPV3_WRAP1_S4_DIV_CLK_SRC 211 +#define GCC_QUPV3_WRAP1_S5_CLK 212 +#define GCC_QUPV3_WRAP1_S5_CLK_SRC 213 +#define GCC_QUPV3_WRAP1_S6_CLK 214 +#define GCC_QUPV3_WRAP1_S6_CLK_SRC 215 +#define GCC_QUPV3_WRAP1_S7_CLK 216 +#define GCC_QUPV3_WRAP1_S7_CLK_SRC 217 +#define GCC_QUPV3_WRAP2_CORE_2X_CLK 218 +#define GCC_QUPV3_WRAP2_CORE_CLK 219 +#define GCC_QUPV3_WRAP2_QSPI0_CLK 220 +#define GCC_QUPV3_WRAP2_S0_CLK 221 +#define GCC_QUPV3_WRAP2_S0_CLK_SRC 222 +#define GCC_QUPV3_WRAP2_S1_CLK 223 +#define GCC_QUPV3_WRAP2_S1_CLK_SRC 224 +#define GCC_QUPV3_WRAP2_S2_CLK 225 +#define GCC_QUPV3_WRAP2_S2_CLK_SRC 226 +#define GCC_QUPV3_WRAP2_S3_CLK 227 +#define GCC_QUPV3_WRAP2_S3_CLK_SRC 228 +#define GCC_QUPV3_WRAP2_S4_CLK 229 +#define GCC_QUPV3_WRAP2_S4_CLK_SRC 230 +#define GCC_QUPV3_WRAP2_S4_DIV_CLK_SRC 231 +#define GCC_QUPV3_WRAP2_S5_CLK 232 +#define GCC_QUPV3_WRAP2_S5_CLK_SRC 233 +#define GCC_QUPV3_WRAP2_S6_CLK 234 +#define GCC_QUPV3_WRAP2_S6_CLK_SRC 235 +#define GCC_QUPV3_WRAP2_S7_CLK 236 +#define GCC_QUPV3_WRAP2_S7_CLK_SRC 237 +#define GCC_QUPV3_WRAP_0_M_AHB_CLK 238 +#define GCC_QUPV3_WRAP_0_S_AHB_CLK 239 +#define GCC_QUPV3_WRAP_1_M_AHB_CLK 240 +#define GCC_QUPV3_WRAP_1_S_AHB_CLK 241 +#define GCC_QUPV3_WRAP_2_M_AHB_CLK 242 +#define GCC_QUPV3_WRAP_2_S_AHB_CLK 243 +#define GCC_SDCC2_AHB_CLK 244 +#define GCC_SDCC2_APPS_CLK 245 +#define GCC_SDCC2_APPS_CLK_SRC 246 +#define GCC_SDCC4_AHB_CLK 247 +#define GCC_SDCC4_APPS_CLK 248 +#define GCC_SDCC4_APPS_CLK_SRC 249 +#define GCC_SYS_NOC_USB_AXI_CLK 250 +#define GCC_UFS_1_CARD_CLKREF_CLK 251 +#define GCC_UFS_CARD_AHB_CLK 252 +#define GCC_UFS_CARD_AXI_CLK 253 +#define GCC_UFS_CARD_AXI_CLK_SRC 254 +#define GCC_UFS_CARD_CLKREF_CLK 255 +#define GCC_UFS_CARD_ICE_CORE_CLK 256 +#define GCC_UFS_CARD_ICE_CORE_CLK_SRC 257 +#define GCC_UFS_CARD_PHY_AUX_CLK 258 +#define GCC_UFS_CARD_PHY_AUX_CLK_SRC 259 +#define GCC_UFS_CARD_RX_SYMBOL_0_CLK 260 +#define GCC_UFS_CARD_RX_SYMBOL_0_CLK_SRC 261 +#define GCC_UFS_CARD_RX_SYMBOL_1_CLK 262 +#define GCC_UFS_CARD_RX_SYMBOL_1_CLK_SRC 263 +#define GCC_UFS_CARD_TX_SYMBOL_0_CLK 264 +#define GCC_UFS_CARD_TX_SYMBOL_0_CLK_SRC 265 +#define GCC_UFS_CARD_UNIPRO_CORE_CLK 266 +#define GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC 267 +#define GCC_UFS_PHY_AHB_CLK 268 +#define GCC_UFS_PHY_AXI_CLK 269 +#define GCC_UFS_PHY_AXI_CLK_SRC 270 +#define GCC_UFS_PHY_ICE_CORE_CLK 271 +#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 272 +#define GCC_UFS_PHY_PHY_AUX_CLK 273 +#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 274 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 275 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC 276 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 277 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC 278 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 279 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC 280 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK 281 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 282 +#define GCC_UFS_REF_CLKREF_CLK 283 +#define GCC_USB2_HS0_CLKREF_CLK 284 +#define GCC_USB2_HS1_CLKREF_CLK 285 +#define GCC_USB2_HS2_CLKREF_CLK 286 +#define GCC_USB2_HS3_CLKREF_CLK 287 +#define GCC_USB30_MP_MASTER_CLK 288 +#define GCC_USB30_MP_MASTER_CLK_SRC 289 +#define GCC_USB30_MP_MOCK_UTMI_CLK 290 +#define GCC_USB30_MP_MOCK_UTMI_CLK_SRC 291 +#define GCC_USB30_MP_MOCK_UTMI_POSTDIV_CLK_SRC 292 +#define GCC_USB30_MP_SLEEP_CLK 293 +#define GCC_USB30_PRIM_MASTER_CLK 294 +#define GCC_USB30_PRIM_MASTER_CLK_SRC 295 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK 296 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 297 +#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC 298 +#define GCC_USB30_PRIM_SLEEP_CLK 299 +#define GCC_USB30_SEC_MASTER_CLK 300 +#define GCC_USB30_SEC_MASTER_CLK_SRC 301 +#define GCC_USB30_SEC_MOCK_UTMI_CLK 302 +#define GCC_USB30_SEC_MOCK_UTMI_CLK_SRC 303 +#define GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC 304 +#define GCC_USB30_SEC_SLEEP_CLK 305 +#define GCC_USB34_PRIM_PHY_PIPE_CLK_SRC 306 +#define GCC_USB34_SEC_PHY_PIPE_CLK_SRC 307 +#define GCC_USB3_MP0_CLKREF_CLK 308 +#define GCC_USB3_MP1_CLKREF_CLK 309 +#define GCC_USB3_MP_PHY_AUX_CLK 310 +#define GCC_USB3_MP_PHY_AUX_CLK_SRC 311 +#define GCC_USB3_MP_PHY_COM_AUX_CLK 312 +#define GCC_USB3_MP_PHY_PIPE_0_CLK 313 +#define GCC_USB3_MP_PHY_PIPE_0_CLK_SRC 314 +#define GCC_USB3_MP_PHY_PIPE_1_CLK 315 +#define GCC_USB3_MP_PHY_PIPE_1_CLK_SRC 316 +#define GCC_USB3_PRIM_PHY_AUX_CLK 317 +#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 318 +#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 319 +#define GCC_USB3_PRIM_PHY_PIPE_CLK 320 +#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC 321 +#define GCC_USB3_SEC_PHY_AUX_CLK 322 +#define GCC_USB3_SEC_PHY_AUX_CLK_SRC 323 +#define GCC_USB3_SEC_PHY_COM_AUX_CLK 324 +#define GCC_USB3_SEC_PHY_PIPE_CLK 325 +#define GCC_USB3_SEC_PHY_PIPE_CLK_SRC 326 +#define GCC_USB4_1_CFG_AHB_CLK 327 +#define GCC_USB4_1_DP_CLK 328 +#define GCC_USB4_1_MASTER_CLK 329 +#define GCC_USB4_1_MASTER_CLK_SRC 330 +#define GCC_USB4_1_PHY_DP_CLK_SRC 331 +#define GCC_USB4_1_PHY_P2RR2P_PIPE_CLK 332 +#define GCC_USB4_1_PHY_P2RR2P_PIPE_CLK_SRC 333 +#define GCC_USB4_1_PHY_PCIE_PIPE_CLK 334 +#define GCC_USB4_1_PHY_PCIE_PIPE_CLK_SRC 335 +#define GCC_USB4_1_PHY_PCIE_PIPE_MUX_CLK_SRC 336 +#define GCC_USB4_1_PHY_PCIE_PIPEGMUX_CLK_SRC 337 +#define GCC_USB4_1_PHY_RX0_CLK 338 +#define GCC_USB4_1_PHY_RX0_CLK_SRC 339 +#define GCC_USB4_1_PHY_RX1_CLK 340 +#define GCC_USB4_1_PHY_RX1_CLK_SRC 341 +#define GCC_USB4_1_PHY_SYS_CLK_SRC 342 +#define GCC_USB4_1_PHY_USB_PIPE_CLK 343 +#define GCC_USB4_1_SB_IF_CLK 344 +#define GCC_USB4_1_SB_IF_CLK_SRC 345 +#define GCC_USB4_1_SYS_CLK 346 +#define GCC_USB4_1_TMU_CLK 347 +#define GCC_USB4_1_TMU_CLK_SRC 348 +#define GCC_USB4_CFG_AHB_CLK 349 +#define GCC_USB4_CLKREF_CLK 350 +#define GCC_USB4_DP_CLK 351 +#define GCC_USB4_EUD_CLKREF_CLK 352 +#define GCC_USB4_MASTER_CLK 353 +#define GCC_USB4_MASTER_CLK_SRC 354 +#define GCC_USB4_PHY_DP_CLK_SRC 355 +#define GCC_USB4_PHY_P2RR2P_PIPE_CLK 356 +#define GCC_USB4_PHY_P2RR2P_PIPE_CLK_SRC 357 +#define GCC_USB4_PHY_PCIE_PIPE_CLK 358 +#define GCC_USB4_PHY_PCIE_PIPE_CLK_SRC 359 +#define GCC_USB4_PHY_PCIE_PIPE_MUX_CLK_SRC 360 +#define GCC_USB4_PHY_PCIE_PIPEGMUX_CLK_SRC 361 +#define GCC_USB4_PHY_RX0_CLK 362 +#define GCC_USB4_PHY_RX0_CLK_SRC 363 +#define GCC_USB4_PHY_RX1_CLK 364 +#define GCC_USB4_PHY_RX1_CLK_SRC 365 +#define GCC_USB4_PHY_SYS_CLK_SRC 366 +#define GCC_USB4_PHY_USB_PIPE_CLK 367 +#define GCC_USB4_SB_IF_CLK 368 +#define GCC_USB4_SB_IF_CLK_SRC 369 +#define GCC_USB4_SYS_CLK 370 +#define GCC_USB4_TMU_CLK 371 +#define GCC_USB4_TMU_CLK_SRC 372 +#define GCC_VIDEO_AHB_CLK 373 +#define GCC_VIDEO_AXI0_CLK 374 +#define GCC_VIDEO_AXI1_CLK 375 +#define GCC_VIDEO_CVP_THROTTLE_CLK 376 +#define GCC_VIDEO_VCODEC_THROTTLE_CLK 377 +#define GCC_VIDEO_XO_CLK 378 +#define GCC_AGGRE_UFS_CARD_AXI_HW_CTL_CLK 379 +#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK 380 +#define GCC_UFS_CARD_AXI_HW_CTL_CLK 381 +#define GCC_UFS_CARD_ICE_CORE_HW_CTL_CLK 382 +#define GCC_UFS_CARD_PHY_AUX_HW_CTL_CLK 383 +#define GCC_UFS_CARD_UNIPRO_CORE_HW_CTL_CLK 384 +#define GCC_UFS_PHY_AXI_HW_CTL_CLK 385 +#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK 386 +#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK 387 +#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK 388 + +/* GCC resets */ +#define GCC_EMAC0_BCR 0 +#define GCC_EMAC1_BCR 1 +#define GCC_PCIE_0_LINK_DOWN_BCR 2 +#define GCC_PCIE_0_NOCSR_COM_PHY_BCR 3 +#define GCC_PCIE_0_PHY_BCR 4 +#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR 5 +#define GCC_PCIE_0_TUNNEL_BCR 6 +#define GCC_PCIE_1_LINK_DOWN_BCR 7 +#define GCC_PCIE_1_NOCSR_COM_PHY_BCR 8 +#define GCC_PCIE_1_PHY_BCR 9 +#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR 10 +#define GCC_PCIE_1_TUNNEL_BCR 11 +#define GCC_PCIE_2A_BCR 12 +#define GCC_PCIE_2A_LINK_DOWN_BCR 13 +#define GCC_PCIE_2A_NOCSR_COM_PHY_BCR 14 +#define GCC_PCIE_2A_PHY_BCR 15 +#define GCC_PCIE_2A_PHY_NOCSR_COM_PHY_BCR 16 +#define GCC_PCIE_2B_BCR 17 +#define GCC_PCIE_2B_LINK_DOWN_BCR 18 +#define GCC_PCIE_2B_NOCSR_COM_PHY_BCR 19 +#define GCC_PCIE_2B_PHY_BCR 20 +#define GCC_PCIE_2B_PHY_NOCSR_COM_PHY_BCR 21 +#define GCC_PCIE_3A_BCR 22 +#define GCC_PCIE_3A_LINK_DOWN_BCR 23 +#define GCC_PCIE_3A_NOCSR_COM_PHY_BCR 24 +#define GCC_PCIE_3A_PHY_BCR 25 +#define GCC_PCIE_3A_PHY_NOCSR_COM_PHY_BCR 26 +#define GCC_PCIE_3B_BCR 27 +#define GCC_PCIE_3B_LINK_DOWN_BCR 28 +#define GCC_PCIE_3B_NOCSR_COM_PHY_BCR 29 +#define GCC_PCIE_3B_PHY_BCR 30 +#define GCC_PCIE_3B_PHY_NOCSR_COM_PHY_BCR 31 +#define GCC_PCIE_4_BCR 32 +#define GCC_PCIE_4_LINK_DOWN_BCR 33 +#define GCC_PCIE_4_NOCSR_COM_PHY_BCR 34 +#define GCC_PCIE_4_PHY_BCR 35 +#define GCC_PCIE_4_PHY_NOCSR_COM_PHY_BCR 36 +#define GCC_PCIE_PHY_CFG_AHB_BCR 37 +#define GCC_PCIE_PHY_COM_BCR 38 +#define GCC_PCIE_RSCC_BCR 39 +#define GCC_QUSB2PHY_HS0_MP_BCR 40 +#define GCC_QUSB2PHY_HS1_MP_BCR 41 +#define GCC_QUSB2PHY_HS2_MP_BCR 42 +#define GCC_QUSB2PHY_HS3_MP_BCR 43 +#define GCC_QUSB2PHY_PRIM_BCR 44 +#define GCC_QUSB2PHY_SEC_BCR 45 +#define GCC_SDCC2_BCR 46 +#define GCC_SDCC4_BCR 47 +#define GCC_UFS_CARD_BCR 48 +#define GCC_UFS_PHY_BCR 49 +#define GCC_USB2_PHY_PRIM_BCR 50 +#define GCC_USB2_PHY_SEC_BCR 51 +#define GCC_USB30_MP_BCR 52 +#define GCC_USB30_PRIM_BCR 53 +#define GCC_USB30_SEC_BCR 54 +#define GCC_USB3_DP_PHY_PRIM_BCR 55 +#define GCC_USB3_DP_PHY_SEC_BCR 56 +#define GCC_USB3_PHY_PRIM_BCR 57 +#define GCC_USB3_PHY_SEC_BCR 58 +#define GCC_USB3_UNIPHY_MP0_BCR 59 +#define GCC_USB3_UNIPHY_MP1_BCR 60 +#define GCC_USB3PHY_PHY_PRIM_BCR 61 +#define GCC_USB3PHY_PHY_SEC_BCR 62 +#define GCC_USB3UNIPHY_PHY_MP0_BCR 63 +#define GCC_USB3UNIPHY_PHY_MP1_BCR 64 +#define GCC_USB4_1_BCR 65 +#define GCC_USB4_1_DP_PHY_PRIM_BCR 66 +#define GCC_USB4_1_DPPHY_AUX_BCR 67 +#define GCC_USB4_1_PHY_PRIM_BCR 68 +#define GCC_USB4_BCR 69 +#define GCC_USB4_DP_PHY_PRIM_BCR 70 +#define GCC_USB4_DPPHY_AUX_BCR 71 +#define GCC_USB4_PHY_PRIM_BCR 72 +#define GCC_USB4PHY_1_PHY_PRIM_BCR 73 +#define GCC_USB4PHY_PHY_PRIM_BCR 74 +#define GCC_USB_PHY_CFG_AHB2PHY_BCR 75 +#define GCC_VIDEO_BCR 76 +#define GCC_VIDEO_AXI0_CLK_ARES 77 +#define GCC_VIDEO_AXI1_CLK_ARES 78 + +/* GCC GDSCs */ +#define PCIE_0_TUNNEL_GDSC 0 +#define PCIE_1_TUNNEL_GDSC 1 +#define PCIE_2A_GDSC 2 +#define PCIE_2B_GDSC 3 +#define PCIE_3A_GDSC 4 +#define PCIE_3B_GDSC 5 +#define PCIE_4_GDSC 6 +#define UFS_CARD_GDSC 7 +#define UFS_PHY_GDSC 8 +#define USB30_MP_GDSC 9 +#define USB30_PRIM_GDSC 10 +#define USB30_SEC_GDSC 11 + +#endif diff --git a/dts/include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h b/dts/include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h new file mode 100644 index 0000000000..20ef2ea673 --- /dev/null +++ b/dts/include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_LPASS_AUDIO_CC_SC7280_H +#define _DT_BINDINGS_CLK_QCOM_LPASS_AUDIO_CC_SC7280_H + +/* LPASS_AUDIO_CC clocks */ +#define LPASS_AUDIO_CC_PLL 0 +#define LPASS_AUDIO_CC_PLL_OUT_AUX2 1 +#define LPASS_AUDIO_CC_PLL_OUT_AUX2_DIV_CLK_SRC 2 +#define LPASS_AUDIO_CC_PLL_OUT_MAIN_DIV_CLK_SRC 3 +#define LPASS_AUDIO_CC_CDIV_RX_MCLK_DIV_CLK_SRC 4 +#define LPASS_AUDIO_CC_CODEC_MEM0_CLK 5 +#define LPASS_AUDIO_CC_CODEC_MEM1_CLK 6 +#define LPASS_AUDIO_CC_CODEC_MEM2_CLK 7 +#define LPASS_AUDIO_CC_CODEC_MEM_CLK 8 +#define LPASS_AUDIO_CC_EXT_MCLK0_CLK 9 +#define LPASS_AUDIO_CC_EXT_MCLK0_CLK_SRC 10 +#define LPASS_AUDIO_CC_EXT_MCLK1_CLK 11 +#define LPASS_AUDIO_CC_EXT_MCLK1_CLK_SRC 12 +#define LPASS_AUDIO_CC_RX_MCLK_2X_CLK 13 +#define LPASS_AUDIO_CC_RX_MCLK_CLK 14 +#define LPASS_AUDIO_CC_RX_MCLK_CLK_SRC 15 + +/* LPASS_AON_CC clocks */ +#define LPASS_AON_CC_PLL 0 +#define LPASS_AON_CC_PLL_OUT_EVEN 1 +#define LPASS_AON_CC_PLL_OUT_MAIN_CDIV_DIV_CLK_SRC 2 +#define LPASS_AON_CC_PLL_OUT_ODD 3 +#define LPASS_AON_CC_AUDIO_HM_H_CLK 4 +#define LPASS_AON_CC_CDIV_TX_MCLK_DIV_CLK_SRC 5 +#define LPASS_AON_CC_MAIN_RCG_CLK_SRC 6 +#define LPASS_AON_CC_TX_MCLK_2X_CLK 7 +#define LPASS_AON_CC_TX_MCLK_CLK 8 +#define LPASS_AON_CC_TX_MCLK_RCG_CLK_SRC 9 +#define LPASS_AON_CC_VA_MEM0_CLK 10 + +/* LPASS_AON_CC power domains */ +#define LPASS_AON_CC_LPASS_AUDIO_HM_GDSC 0 + +#endif diff --git a/dts/include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h b/dts/include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h new file mode 100644 index 0000000000..28ed2a07aa --- /dev/null +++ b/dts/include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7280_H +#define _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7280_H + +/* LPASS_CORE_CC clocks */ +#define LPASS_CORE_CC_DIG_PLL 0 +#define LPASS_CORE_CC_DIG_PLL_OUT_MAIN_DIV_CLK_SRC 1 +#define LPASS_CORE_CC_DIG_PLL_OUT_ODD 2 +#define LPASS_CORE_CC_CORE_CLK 3 +#define LPASS_CORE_CC_CORE_CLK_SRC 4 +#define LPASS_CORE_CC_EXT_IF0_CLK_SRC 5 +#define LPASS_CORE_CC_EXT_IF0_IBIT_CLK 6 +#define LPASS_CORE_CC_EXT_IF1_CLK_SRC 7 +#define LPASS_CORE_CC_EXT_IF1_IBIT_CLK 8 +#define LPASS_CORE_CC_LPM_CORE_CLK 9 +#define LPASS_CORE_CC_LPM_MEM0_CORE_CLK 10 +#define LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK 11 + +/* LPASS_CORE_CC power domains */ +#define LPASS_CORE_CC_LPASS_CORE_HM_GDSC 0 + +#endif diff --git a/dts/include/dt-bindings/clock/r8a779g0-cpg-mssr.h b/dts/include/dt-bindings/clock/r8a779g0-cpg-mssr.h new file mode 100644 index 0000000000..754c54a6eb --- /dev/null +++ b/dts/include/dt-bindings/clock/r8a779g0-cpg-mssr.h @@ -0,0 +1,90 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (C) 2022 Renesas Electronics Corp. + */ +#ifndef __DT_BINDINGS_CLOCK_R8A779G0_CPG_MSSR_H__ +#define __DT_BINDINGS_CLOCK_R8A779G0_CPG_MSSR_H__ + +#include + +/* r8a779g0 CPG Core Clocks */ + +#define R8A779G0_CLK_ZX 0 +#define R8A779G0_CLK_ZS 1 +#define R8A779G0_CLK_ZT 2 +#define R8A779G0_CLK_ZTR 3 +#define R8A779G0_CLK_S0D2 4 +#define R8A779G0_CLK_S0D3 5 +#define R8A779G0_CLK_S0D4 6 +#define R8A779G0_CLK_S0D1_VIO 7 +#define R8A779G0_CLK_S0D2_VIO 8 +#define R8A779G0_CLK_S0D4_VIO 9 +#define R8A779G0_CLK_S0D8_VIO 10 +#define R8A779G0_CLK_S0D1_VC 11 +#define R8A779G0_CLK_S0D2_VC 12 +#define R8A779G0_CLK_S0D4_VC 13 +#define R8A779G0_CLK_S0D2_MM 14 +#define R8A779G0_CLK_S0D4_MM 15 +#define R8A779G0_CLK_S0D2_U3DG 16 +#define R8A779G0_CLK_S0D4_U3DG 17 +#define R8A779G0_CLK_S0D2_RT 18 +#define R8A779G0_CLK_S0D3_RT 19 +#define R8A779G0_CLK_S0D4_RT 20 +#define R8A779G0_CLK_S0D6_RT 21 +#define R8A779G0_CLK_S0D24_RT 22 +#define R8A779G0_CLK_S0D2_PER 23 +#define R8A779G0_CLK_S0D3_PER 24 +#define R8A779G0_CLK_S0D4_PER 25 +#define R8A779G0_CLK_S0D6_PER 26 +#define R8A779G0_CLK_S0D12_PER 27 +#define R8A779G0_CLK_S0D24_PER 28 +#define R8A779G0_CLK_S0D1_HSC 29 +#define R8A779G0_CLK_S0D2_HSC 30 +#define R8A779G0_CLK_S0D4_HSC 31 +#define R8A779G0_CLK_S0D2_CC 32 +#define R8A779G0_CLK_SVD1_IR 33 +#define R8A779G0_CLK_SVD2_IR 34 +#define R8A779G0_CLK_SVD1_VIP 35 +#define R8A779G0_CLK_SVD2_VIP 36 +#define R8A779G0_CLK_CL 37 +#define R8A779G0_CLK_CL16M 38 +#define R8A779G0_CLK_CL16M_MM 39 +#define R8A779G0_CLK_CL16M_RT 40 +#define R8A779G0_CLK_CL16M_PER 41 +#define R8A779G0_CLK_CL16M_HSC 42 +#define R8A779G0_CLK_Z0 43 +#define R8A779G0_CLK_ZB3 44 +#define R8A779G0_CLK_ZB3D2 45 +#define R8A779G0_CLK_ZB3D4 46 +#define R8A779G0_CLK_ZG 47 +#define R8A779G0_CLK_SD0H 48 +#define R8A779G0_CLK_SD0 49 +#define R8A779G0_CLK_RPC 50 +#define R8A779G0_CLK_RPCD2 51 +#define R8A779G0_CLK_MSO 52 +#define R8A779G0_CLK_CANFD 53 +#define R8A779G0_CLK_CSI 54 +#define R8A779G0_CLK_FRAY 55 +#define R8A779G0_CLK_IPC 56 +#define R8A779G0_CLK_SASYNCRT 57 +#define R8A779G0_CLK_SASYNCPERD1 58 +#define R8A779G0_CLK_SASYNCPERD2 59 +#define R8A779G0_CLK_SASYNCPERD4 60 +#define R8A779G0_CLK_VIOBUS 61 +#define R8A779G0_CLK_VIOBUSD2 62 +#define R8A779G0_CLK_VCBUS 63 +#define R8A779G0_CLK_VCBUSD2 64 +#define R8A779G0_CLK_DSIEXT 65 +#define R8A779G0_CLK_DSIREF 66 +#define R8A779G0_CLK_ADGH 67 +#define R8A779G0_CLK_OSC 68 +#define R8A779G0_CLK_ZR0 69 +#define R8A779G0_CLK_ZR1 70 +#define R8A779G0_CLK_ZR2 71 +#define R8A779G0_CLK_IMPA 72 +#define R8A779G0_CLK_IMPAD4 73 +#define R8A779G0_CLK_CPEX 74 +#define R8A779G0_CLK_CBFUSA 75 +#define R8A779G0_CLK_R 76 + +#endif /* __DT_BINDINGS_CLOCK_R8A779G0_CPG_MSSR_H__ */ diff --git a/dts/include/dt-bindings/clock/r9a07g043-cpg.h b/dts/include/dt-bindings/clock/r9a07g043-cpg.h new file mode 100644 index 0000000000..27e2327330 --- /dev/null +++ b/dts/include/dt-bindings/clock/r9a07g043-cpg.h @@ -0,0 +1,184 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ +#ifndef __DT_BINDINGS_CLOCK_R9A07G043_CPG_H__ +#define __DT_BINDINGS_CLOCK_R9A07G043_CPG_H__ + +#include + +/* R9A07G043 CPG Core Clocks */ +#define R9A07G043_CLK_I 0 +#define R9A07G043_CLK_I2 1 +#define R9A07G043_CLK_S0 2 +#define R9A07G043_CLK_SPI0 3 +#define R9A07G043_CLK_SPI1 4 +#define R9A07G043_CLK_SD0 5 +#define R9A07G043_CLK_SD1 6 +#define R9A07G043_CLK_M0 7 +#define R9A07G043_CLK_M2 8 +#define R9A07G043_CLK_M3 9 +#define R9A07G043_CLK_HP 10 +#define R9A07G043_CLK_TSU 11 +#define R9A07G043_CLK_ZT 12 +#define R9A07G043_CLK_P0 13 +#define R9A07G043_CLK_P1 14 +#define R9A07G043_CLK_P2 15 +#define R9A07G043_CLK_AT 16 +#define R9A07G043_OSCCLK 17 +#define R9A07G043_CLK_P0_DIV2 18 + +/* R9A07G043 Module Clocks */ +#define R9A07G043_CA55_SCLK 0 /* RZ/G2UL Only */ +#define R9A07G043_CA55_PCLK 1 /* RZ/G2UL Only */ +#define R9A07G043_CA55_ATCLK 2 /* RZ/G2UL Only */ +#define R9A07G043_CA55_GICCLK 3 /* RZ/G2UL Only */ +#define R9A07G043_CA55_PERICLK 4 /* RZ/G2UL Only */ +#define R9A07G043_CA55_ACLK 5 /* RZ/G2UL Only */ +#define R9A07G043_CA55_TSCLK 6 /* RZ/G2UL Only */ +#define R9A07G043_GIC600_GICCLK 7 /* RZ/G2UL Only */ +#define R9A07G043_IA55_CLK 8 /* RZ/G2UL Only */ +#define R9A07G043_IA55_PCLK 9 /* RZ/G2UL Only */ +#define R9A07G043_MHU_PCLK 10 /* RZ/G2UL Only */ +#define R9A07G043_SYC_CNT_CLK 11 +#define R9A07G043_DMAC_ACLK 12 +#define R9A07G043_DMAC_PCLK 13 +#define R9A07G043_OSTM0_PCLK 14 +#define R9A07G043_OSTM1_PCLK 15 +#define R9A07G043_OSTM2_PCLK 16 +#define R9A07G043_MTU_X_MCK_MTU3 17 +#define R9A07G043_POE3_CLKM_POE 18 +#define R9A07G043_WDT0_PCLK 19 +#define R9A07G043_WDT0_CLK 20 +#define R9A07G043_WDT2_PCLK 21 /* RZ/G2UL Only */ +#define R9A07G043_WDT2_CLK 22 /* RZ/G2UL Only */ +#define R9A07G043_SPI_CLK2 23 +#define R9A07G043_SPI_CLK 24 +#define R9A07G043_SDHI0_IMCLK 25 +#define R9A07G043_SDHI0_IMCLK2 26 +#define R9A07G043_SDHI0_CLK_HS 27 +#define R9A07G043_SDHI0_ACLK 28 +#define R9A07G043_SDHI1_IMCLK 29 +#define R9A07G043_SDHI1_IMCLK2 30 +#define R9A07G043_SDHI1_CLK_HS 31 +#define R9A07G043_SDHI1_ACLK 32 +#define R9A07G043_ISU_ACLK 33 /* RZ/G2UL Only */ +#define R9A07G043_ISU_PCLK 34 /* RZ/G2UL Only */ +#define R9A07G043_CRU_SYSCLK 35 /* RZ/G2UL Only */ +#define R9A07G043_CRU_VCLK 36 /* RZ/G2UL Only */ +#define R9A07G043_CRU_PCLK 37 /* RZ/G2UL Only */ +#define R9A07G043_CRU_ACLK 38 /* RZ/G2UL Only */ +#define R9A07G043_LCDC_CLK_A 39 /* RZ/G2UL Only */ +#define R9A07G043_LCDC_CLK_P 40 /* RZ/G2UL Only */ +#define R9A07G043_LCDC_CLK_D 41 /* RZ/G2UL Only */ +#define R9A07G043_SSI0_PCLK2 42 +#define R9A07G043_SSI0_PCLK_SFR 43 +#define R9A07G043_SSI1_PCLK2 44 +#define R9A07G043_SSI1_PCLK_SFR 45 +#define R9A07G043_SSI2_PCLK2 46 +#define R9A07G043_SSI2_PCLK_SFR 47 +#define R9A07G043_SSI3_PCLK2 48 +#define R9A07G043_SSI3_PCLK_SFR 49 +#define R9A07G043_SRC_CLKP 50 /* RZ/G2UL Only */ +#define R9A07G043_USB_U2H0_HCLK 51 +#define R9A07G043_USB_U2H1_HCLK 52 +#define R9A07G043_USB_U2P_EXR_CPUCLK 53 +#define R9A07G043_USB_PCLK 54 +#define R9A07G043_ETH0_CLK_AXI 55 +#define R9A07G043_ETH0_CLK_CHI 56 +#define R9A07G043_ETH1_CLK_AXI 57 +#define R9A07G043_ETH1_CLK_CHI 58 +#define R9A07G043_I2C0_PCLK 59 +#define R9A07G043_I2C1_PCLK 60 +#define R9A07G043_I2C2_PCLK 61 +#define R9A07G043_I2C3_PCLK 62 +#define R9A07G043_SCIF0_CLK_PCK 63 +#define R9A07G043_SCIF1_CLK_PCK 64 +#define R9A07G043_SCIF2_CLK_PCK 65 +#define R9A07G043_SCIF3_CLK_PCK 66 +#define R9A07G043_SCIF4_CLK_PCK 67 +#define R9A07G043_SCI0_CLKP 68 +#define R9A07G043_SCI1_CLKP 69 +#define R9A07G043_IRDA_CLKP 70 +#define R9A07G043_RSPI0_CLKB 71 +#define R9A07G043_RSPI1_CLKB 72 +#define R9A07G043_RSPI2_CLKB 73 +#define R9A07G043_CANFD_PCLK 74 +#define R9A07G043_GPIO_HCLK 75 +#define R9A07G043_ADC_ADCLK 76 +#define R9A07G043_ADC_PCLK 77 +#define R9A07G043_TSU_PCLK 78 + +/* R9A07G043 Resets */ +#define R9A07G043_CA55_RST_1_0 0 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_1_1 1 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_3_0 2 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_3_1 3 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_4 4 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_5 5 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_6 6 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_7 7 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_8 8 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_9 9 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_10 10 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_11 11 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_12 12 /* RZ/G2UL Only */ +#define R9A07G043_GIC600_GICRESET_N 13 /* RZ/G2UL Only */ +#define R9A07G043_GIC600_DBG_GICRESET_N 14 /* RZ/G2UL Only */ +#define R9A07G043_IA55_RESETN 15 /* RZ/G2UL Only */ +#define R9A07G043_MHU_RESETN 16 /* RZ/G2UL Only */ +#define R9A07G043_DMAC_ARESETN 17 +#define R9A07G043_DMAC_RST_ASYNC 18 +#define R9A07G043_SYC_RESETN 19 +#define R9A07G043_OSTM0_PRESETZ 20 +#define R9A07G043_OSTM1_PRESETZ 21 +#define R9A07G043_OSTM2_PRESETZ 22 +#define R9A07G043_MTU_X_PRESET_MTU3 23 +#define R9A07G043_POE3_RST_M_REG 24 +#define R9A07G043_WDT0_PRESETN 25 +#define R9A07G043_WDT2_PRESETN 26 /* RZ/G2UL Only */ +#define R9A07G043_SPI_RST 27 +#define R9A07G043_SDHI0_IXRST 28 +#define R9A07G043_SDHI1_IXRST 29 +#define R9A07G043_ISU_ARESETN 30 /* RZ/G2UL Only */ +#define R9A07G043_ISU_PRESETN 31 /* RZ/G2UL Only */ +#define R9A07G043_CRU_CMN_RSTB 32 /* RZ/G2UL Only */ +#define R9A07G043_CRU_PRESETN 33 /* RZ/G2UL Only */ +#define R9A07G043_CRU_ARESETN 34 /* RZ/G2UL Only */ +#define R9A07G043_LCDC_RESET_N 35 /* RZ/G2UL Only */ +#define R9A07G043_SSI0_RST_M2_REG 36 +#define R9A07G043_SSI1_RST_M2_REG 37 +#define R9A07G043_SSI2_RST_M2_REG 38 +#define R9A07G043_SSI3_RST_M2_REG 39 +#define R9A07G043_SRC_RST 40 /* RZ/G2UL Only */ +#define R9A07G043_USB_U2H0_HRESETN 41 +#define R9A07G043_USB_U2H1_HRESETN 42 +#define R9A07G043_USB_U2P_EXL_SYSRST 43 +#define R9A07G043_USB_PRESETN 44 +#define R9A07G043_ETH0_RST_HW_N 45 +#define R9A07G043_ETH1_RST_HW_N 46 +#define R9A07G043_I2C0_MRST 47 +#define R9A07G043_I2C1_MRST 48 +#define R9A07G043_I2C2_MRST 49 +#define R9A07G043_I2C3_MRST 50 +#define R9A07G043_SCIF0_RST_SYSTEM_N 51 +#define R9A07G043_SCIF1_RST_SYSTEM_N 52 +#define R9A07G043_SCIF2_RST_SYSTEM_N 53 +#define R9A07G043_SCIF3_RST_SYSTEM_N 54 +#define R9A07G043_SCIF4_RST_SYSTEM_N 55 +#define R9A07G043_SCI0_RST 56 +#define R9A07G043_SCI1_RST 57 +#define R9A07G043_IRDA_RST 58 +#define R9A07G043_RSPI0_RST 59 +#define R9A07G043_RSPI1_RST 60 +#define R9A07G043_RSPI2_RST 61 +#define R9A07G043_CANFD_RSTP_N 62 +#define R9A07G043_CANFD_RSTC_N 63 +#define R9A07G043_GPIO_RSTN 64 +#define R9A07G043_GPIO_PORT_RESETN 65 +#define R9A07G043_GPIO_SPARE_RESETN 66 +#define R9A07G043_ADC_PRESETN 67 +#define R9A07G043_ADC_ADRST_N 68 +#define R9A07G043_TSU_PRESETN 69 + +#endif /* __DT_BINDINGS_CLOCK_R9A07G043_CPG_H__ */ diff --git a/dts/include/dt-bindings/clock/r9a09g011-cpg.h b/dts/include/dt-bindings/clock/r9a09g011-cpg.h new file mode 100644 index 0000000000..41dd585d71 --- /dev/null +++ b/dts/include/dt-bindings/clock/r9a09g011-cpg.h @@ -0,0 +1,352 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ +#ifndef __DT_BINDINGS_CLOCK_R9A09G011_CPG_H__ +#define __DT_BINDINGS_CLOCK_R9A09G011_CPG_H__ + +#include + +/* Module Clocks */ +#define R9A09G011_SYS_CLK 0 +#define R9A09G011_PFC_PCLK 1 +#define R9A09G011_PMC_CORE_CLOCK 2 +#define R9A09G011_GIC_CLK 3 +#define R9A09G011_RAMA_ACLK 4 +#define R9A09G011_ROMA_ACLK 5 +#define R9A09G011_SEC_ACLK 6 +#define R9A09G011_SEC_PCLK 7 +#define R9A09G011_SEC_TCLK 8 +#define R9A09G011_DMAA_ACLK 9 +#define R9A09G011_TSU0_PCLK 10 +#define R9A09G011_TSU1_PCLK 11 + +#define R9A09G011_CST_TRACECLK 12 +#define R9A09G011_CST_SB_CLK 13 +#define R9A09G011_CST_AHB_CLK 14 +#define R9A09G011_CST_ATB_SB_CLK 15 +#define R9A09G011_CST_TS_SB_CLK 16 + +#define R9A09G011_SDI0_ACLK 17 +#define R9A09G011_SDI0_IMCLK 18 +#define R9A09G011_SDI0_IMCLK2 19 +#define R9A09G011_SDI0_CLK_HS 20 +#define R9A09G011_SDI1_ACLK 21 +#define R9A09G011_SDI1_IMCLK 22 +#define R9A09G011_SDI1_IMCLK2 23 +#define R9A09G011_SDI1_CLK_HS 24 +#define R9A09G011_EMM_ACLK 25 +#define R9A09G011_EMM_IMCLK 26 +#define R9A09G011_EMM_IMCLK2 27 +#define R9A09G011_EMM_CLK_HS 28 +#define R9A09G011_NFI_ACLK 29 +#define R9A09G011_NFI_NF_CLK 30 + +#define R9A09G011_PCI_ACLK 31 +#define R9A09G011_PCI_CLK_PMU 32 +#define R9A09G011_PCI_APB_CLK 33 +#define R9A09G011_USB_ACLK_H 34 +#define R9A09G011_USB_ACLK_P 35 +#define R9A09G011_USB_PCLK 36 +#define R9A09G011_ETH0_CLK_AXI 37 +#define R9A09G011_ETH0_CLK_CHI 38 +#define R9A09G011_ETH0_GPTP_EXT 39 + +#define R9A09G011_SDT_CLK 40 +#define R9A09G011_SDT_CLKAPB 41 +#define R9A09G011_SDT_CLK48 42 +#define R9A09G011_GRP_CLK 43 +#define R9A09G011_CIF_P0_CLK 44 +#define R9A09G011_CIF_P1_CLK 45 +#define R9A09G011_CIF_APB_CLK 46 +#define R9A09G011_DCI_CLKAXI 47 +#define R9A09G011_DCI_CLKAPB 48 +#define R9A09G011_DCI_CLKDCI2 49 + +#define R9A09G011_HMI_PCLK 50 +#define R9A09G011_LCI_PCLK 51 +#define R9A09G011_LCI_ACLK 52 +#define R9A09G011_LCI_VCLK 53 +#define R9A09G011_LCI_LPCLK 54 + +#define R9A09G011_AUI_CLK 55 +#define R9A09G011_AUI_CLKAXI 56 +#define R9A09G011_AUI_CLKAPB 57 +#define R9A09G011_AUMCLK 58 +#define R9A09G011_GMCLK0 59 +#define R9A09G011_GMCLK1 60 +#define R9A09G011_MTR_CLK0 61 +#define R9A09G011_MTR_CLK1 62 +#define R9A09G011_MTR_CLKAPB 63 +#define R9A09G011_GFT_CLK 64 +#define R9A09G011_GFT_CLKAPB 65 +#define R9A09G011_GFT_MCLK 66 + +#define R9A09G011_ATGA_CLK 67 +#define R9A09G011_ATGA_CLKAPB 68 +#define R9A09G011_ATGB_CLK 69 +#define R9A09G011_ATGB_CLKAPB 70 +#define R9A09G011_SYC_CNT_CLK 71 + +#define R9A09G011_CPERI_GRPA_PCLK 72 +#define R9A09G011_TIM0_CLK 73 +#define R9A09G011_TIM1_CLK 74 +#define R9A09G011_TIM2_CLK 75 +#define R9A09G011_TIM3_CLK 76 +#define R9A09G011_TIM4_CLK 77 +#define R9A09G011_TIM5_CLK 78 +#define R9A09G011_TIM6_CLK 79 +#define R9A09G011_TIM7_CLK 80 +#define R9A09G011_IIC_PCLK0 81 + +#define R9A09G011_CPERI_GRPB_PCLK 82 +#define R9A09G011_TIM8_CLK 83 +#define R9A09G011_TIM9_CLK 84 +#define R9A09G011_TIM10_CLK 85 +#define R9A09G011_TIM11_CLK 86 +#define R9A09G011_TIM12_CLK 87 +#define R9A09G011_TIM13_CLK 88 +#define R9A09G011_TIM14_CLK 89 +#define R9A09G011_TIM15_CLK 90 +#define R9A09G011_IIC_PCLK1 91 + +#define R9A09G011_CPERI_GRPC_PCLK 92 +#define R9A09G011_TIM16_CLK 93 +#define R9A09G011_TIM17_CLK 94 +#define R9A09G011_TIM18_CLK 95 +#define R9A09G011_TIM19_CLK 96 +#define R9A09G011_TIM20_CLK 97 +#define R9A09G011_TIM21_CLK 98 +#define R9A09G011_TIM22_CLK 99 +#define R9A09G011_TIM23_CLK 100 +#define R9A09G011_WDT0_PCLK 101 +#define R9A09G011_WDT0_CLK 102 +#define R9A09G011_WDT1_PCLK 103 +#define R9A09G011_WDT1_CLK 104 + +#define R9A09G011_CPERI_GRPD_PCLK 105 +#define R9A09G011_TIM24_CLK 106 +#define R9A09G011_TIM25_CLK 107 +#define R9A09G011_TIM26_CLK 108 +#define R9A09G011_TIM27_CLK 109 +#define R9A09G011_TIM28_CLK 110 +#define R9A09G011_TIM29_CLK 111 +#define R9A09G011_TIM30_CLK 112 +#define R9A09G011_TIM31_CLK 113 + +#define R9A09G011_CPERI_GRPE_PCLK 114 +#define R9A09G011_PWM0_CLK 115 +#define R9A09G011_PWM1_CLK 116 +#define R9A09G011_PWM2_CLK 117 +#define R9A09G011_PWM3_CLK 118 +#define R9A09G011_PWM4_CLK 119 +#define R9A09G011_PWM5_CLK 120 +#define R9A09G011_PWM6_CLK 121 +#define R9A09G011_PWM7_CLK 122 + +#define R9A09G011_CPERI_GRPF_PCLK 123 +#define R9A09G011_PWM8_CLK 124 +#define R9A09G011_PWM9_CLK 125 +#define R9A09G011_PWM10_CLK 126 +#define R9A09G011_PWM11_CLK 127 +#define R9A09G011_PWM12_CLK 128 +#define R9A09G011_PWM13_CLK 129 +#define R9A09G011_PWM14_CLK 130 +#define R9A09G011_PWM15_CLK 131 + +#define R9A09G011_CPERI_GRPG_PCLK 132 +#define R9A09G011_CPERI_GRPH_PCLK 133 +#define R9A09G011_URT_PCLK 134 +#define R9A09G011_URT0_CLK 135 +#define R9A09G011_URT1_CLK 136 +#define R9A09G011_CSI0_CLK 137 +#define R9A09G011_CSI1_CLK 138 +#define R9A09G011_CSI2_CLK 139 +#define R9A09G011_CSI3_CLK 140 +#define R9A09G011_CSI4_CLK 141 +#define R9A09G011_CSI5_CLK 142 + +#define R9A09G011_ICB_ACLK1 143 +#define R9A09G011_ICB_GIC_CLK 144 +#define R9A09G011_ICB_MPCLK1 145 +#define R9A09G011_ICB_SPCLK1 146 +#define R9A09G011_ICB_CLK48 147 +#define R9A09G011_ICB_CLK48_2 148 +#define R9A09G011_ICB_CLK48_3 149 +#define R9A09G011_ICB_CLK48_4L 150 +#define R9A09G011_ICB_CLK48_4R 151 +#define R9A09G011_ICB_CLK48_5 152 +#define R9A09G011_ICB_CST_ATB_SB_CLK 153 +#define R9A09G011_ICB_CST_CS_CLK 154 +#define R9A09G011_ICB_CLK100_1 155 +#define R9A09G011_ICB_ETH0_CLK_AXI 156 +#define R9A09G011_ICB_DCI_CLKAXI 157 +#define R9A09G011_ICB_SYC_CNT_CLK 158 + +#define R9A09G011_ICB_DRPA_ACLK 159 +#define R9A09G011_ICB_RFX_ACLK 160 +#define R9A09G011_ICB_RFX_PCLK5 161 +#define R9A09G011_ICB_MMC_ACLK 162 + +#define R9A09G011_ICB_MPCLK3 163 +#define R9A09G011_ICB_CIMA_CLK 164 +#define R9A09G011_ICB_CIMB_CLK 165 +#define R9A09G011_ICB_BIMA_CLK 166 +#define R9A09G011_ICB_FCD_CLKAXI 167 +#define R9A09G011_ICB_VD_ACLK4 168 +#define R9A09G011_ICB_MPCLK4 169 +#define R9A09G011_ICB_VCD_PCLK4 170 + +#define R9A09G011_CA53_CLK 171 +#define R9A09G011_CA53_ACLK 172 +#define R9A09G011_CA53_APCLK_DBG 173 +#define R9A09G011_CST_APB_CA53_CLK 174 +#define R9A09G011_CA53_ATCLK 175 +#define R9A09G011_CST_CS_CLK 176 +#define R9A09G011_CA53_TSCLK 177 +#define R9A09G011_CST_TS_CLK 178 +#define R9A09G011_CA53_APCLK_REG 179 + +#define R9A09G011_DRPA_ACLK 180 +#define R9A09G011_DRPA_DCLK 181 +#define R9A09G011_DRPA_INITCLK 182 + +#define R9A09G011_RAMB0_ACLK 183 +#define R9A09G011_RAMB1_ACLK 184 +#define R9A09G011_RAMB2_ACLK 185 +#define R9A09G011_RAMB3_ACLK 186 + +#define R9A09G011_CIMA_CLKAPB 187 +#define R9A09G011_CIMA_CLK 188 +#define R9A09G011_CIMB_CLK 189 +#define R9A09G011_FAFA_CLK 190 +#define R9A09G011_STG_CLKAXI 191 +#define R9A09G011_STG_CLK0 192 + +#define R9A09G011_BIMA_CLKAPB 193 +#define R9A09G011_BIMA_CLK 194 +#define R9A09G011_FAFB_CLK 195 +#define R9A09G011_FCD_CLK 196 +#define R9A09G011_FCD_CLKAXI 197 + +#define R9A09G011_RIM_CLK 198 +#define R9A09G011_VCD_ACLK 199 +#define R9A09G011_VCD_PCLK 200 +#define R9A09G011_JPG0_CLK 201 +#define R9A09G011_JPG0_ACLK 202 + +#define R9A09G011_MMC_CORE_DDRC_CLK 203 +#define R9A09G011_MMC_ACLK 204 +#define R9A09G011_MMC_PCLK 205 +#define R9A09G011_DDI_APBCLK 206 + +/* Resets */ +#define R9A09G011_SYS_RST_N 0 +#define R9A09G011_PFC_PRESETN 1 +#define R9A09G011_RAMA_ARESETN 2 +#define R9A09G011_ROM_ARESETN 3 +#define R9A09G011_DMAA_ARESETN 4 +#define R9A09G011_SEC_ARESETN 5 +#define R9A09G011_SEC_PRESETN 6 +#define R9A09G011_SEC_RSTB 7 +#define R9A09G011_TSU0_RESETN 8 +#define R9A09G011_TSU1_RESETN 9 +#define R9A09G011_PMC_RESET_N 10 + +#define R9A09G011_CST_NTRST 11 +#define R9A09G011_CST_NPOTRST 12 +#define R9A09G011_CST_NTRST2 13 +#define R9A09G011_CST_CS_RESETN 14 +#define R9A09G011_CST_TS_RESETN 15 +#define R9A09G011_CST_TRESETN 16 +#define R9A09G011_CST_SB_RESETN 17 +#define R9A09G011_CST_AHB_RESETN 18 +#define R9A09G011_CST_TS_SB_RESETN 19 +#define R9A09G011_CST_APB_CA53_RESETN 20 +#define R9A09G011_CST_ATB_SB_RESETN 21 + +#define R9A09G011_SDI0_IXRST 22 +#define R9A09G011_SDI1_IXRST 23 +#define R9A09G011_EMM_IXRST 24 +#define R9A09G011_NFI_MARESETN 25 +#define R9A09G011_NFI_REG_RST_N 26 +#define R9A09G011_USB_PRESET_N 27 +#define R9A09G011_USB_DRD_RESET 28 +#define R9A09G011_USB_ARESETN_P 29 +#define R9A09G011_USB_ARESETN_H 30 +#define R9A09G011_ETH0_RST_HW_N 31 +#define R9A09G011_PCI_ARESETN 32 + +#define R9A09G011_SDT_RSTSYSAX 33 +#define R9A09G011_GRP_RESETN 34 +#define R9A09G011_CIF_RST_N 35 +#define R9A09G011_DCU_RSTSYSAX 36 +#define R9A09G011_HMI_RST_N 37 +#define R9A09G011_HMI_PRESETN 38 +#define R9A09G011_LCI_PRESETN 39 +#define R9A09G011_LCI_ARESETN 40 + +#define R9A09G011_AUI_RSTSYSAX 41 +#define R9A09G011_MTR_RSTSYSAX 42 +#define R9A09G011_GFT_RSTSYSAX 43 +#define R9A09G011_ATGA_RSTSYSAX 44 +#define R9A09G011_ATGB_RSTSYSAX 45 +#define R9A09G011_SYC_RST_N 46 + +#define R9A09G011_TIM_GPA_PRESETN 47 +#define R9A09G011_TIM_GPB_PRESETN 48 +#define R9A09G011_TIM_GPC_PRESETN 49 +#define R9A09G011_TIM_GPD_PRESETN 50 +#define R9A09G011_PWM_GPE_PRESETN 51 +#define R9A09G011_PWM_GPF_PRESETN 52 +#define R9A09G011_CSI_GPG_PRESETN 53 +#define R9A09G011_CSI_GPH_PRESETN 54 +#define R9A09G011_IIC_GPA_PRESETN 55 +#define R9A09G011_IIC_GPB_PRESETN 56 +#define R9A09G011_URT_PRESETN 57 +#define R9A09G011_WDT0_PRESETN 58 +#define R9A09G011_WDT1_PRESETN 59 + +#define R9A09G011_ICB_PD_AWO_RST_N 60 +#define R9A09G011_ICB_PD_MMC_RST_N 61 +#define R9A09G011_ICB_PD_VD0_RST_N 62 +#define R9A09G011_ICB_PD_VD1_RST_N 63 +#define R9A09G011_ICB_PD_RFX_RST_N 64 + +#define R9A09G011_CA53_NCPUPORESET0 65 +#define R9A09G011_CA53_NCPUPORESET1 66 +#define R9A09G011_CA53_NCORERESET0 67 +#define R9A09G011_CA53_NCORERESET1 68 +#define R9A09G011_CA53_NPRESETDBG 69 +#define R9A09G011_CA53_L2RESET 70 +#define R9A09G011_CA53_NMISCRESET_HM 71 +#define R9A09G011_CA53_NMISCRESET_SM 72 +#define R9A09G011_CA53_NARESET 73 + +#define R9A09G011_DRPA_ARESETN 74 + +#define R9A09G011_RAMB0_ARESETN 75 +#define R9A09G011_RAMB1_ARESETN 76 +#define R9A09G011_RAMB2_ARESETN 77 +#define R9A09G011_RAMB3_ARESETN 78 + +#define R9A09G011_CIMA_RSTSYSAX 79 +#define R9A09G011_CIMB_RSTSYSAX 80 +#define R9A09G011_FAFA_RSTSYSAX 81 +#define R9A09G011_STG_RSTSYSAX 82 + +#define R9A09G011_BIMA_RSTSYSAX 83 +#define R9A09G011_FAFB_RSTSYSAX 84 +#define R9A09G011_FCD_RSTSYSAX 85 +#define R9A09G011_RIM_RSTSYSAX 86 +#define R9A09G011_VCD_RESETN 87 +#define R9A09G011_JPG_XRESET 88 + +#define R9A09G011_MMC_CORE_DDRC_RSTN 89 +#define R9A09G011_MMC_ARESETN_N 90 +#define R9A09G011_MMC_PRESETN 91 +#define R9A09G011_DDI_PWROK 92 +#define R9A09G011_DDI_RESET 93 +#define R9A09G011_DDI_RESETN_APB 94 + +#endif /* __DT_BINDINGS_CLOCK_R9A09G011_CPG_H__ */ diff --git a/dts/include/dt-bindings/clock/samsung,exynosautov9.h b/dts/include/dt-bindings/clock/samsung,exynosautov9.h new file mode 100644 index 0000000000..ea9f91b4eb --- /dev/null +++ b/dts/include/dt-bindings/clock/samsung,exynosautov9.h @@ -0,0 +1,299 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2022 Samsung Electronics Co., Ltd. + * Author: Chanho Park + * + * Device Tree binding constants for Exynos Auto V9 clock controller. + */ + +#ifndef _DT_BINDINGS_CLOCK_EXYNOSAUTOV9_H +#define _DT_BINDINGS_CLOCK_EXYNOSAUTOV9_H + +/* CMU_TOP */ +#define FOUT_SHARED0_PLL 1 +#define FOUT_SHARED1_PLL 2 +#define FOUT_SHARED2_PLL 3 +#define FOUT_SHARED3_PLL 4 +#define FOUT_SHARED4_PLL 5 + +/* MUX in CMU_TOP */ +#define MOUT_SHARED0_PLL 6 +#define MOUT_SHARED1_PLL 7 +#define MOUT_SHARED2_PLL 8 +#define MOUT_SHARED3_PLL 9 +#define MOUT_SHARED4_PLL 10 +#define MOUT_CLKCMU_CMU_BOOST 11 +#define MOUT_CLKCMU_CMU_CMUREF 12 +#define MOUT_CLKCMU_ACC_BUS 13 +#define MOUT_CLKCMU_APM_BUS 14 +#define MOUT_CLKCMU_AUD_CPU 15 +#define MOUT_CLKCMU_AUD_BUS 16 +#define MOUT_CLKCMU_BUSC_BUS 17 +#define MOUT_CLKCMU_BUSMC_BUS 19 +#define MOUT_CLKCMU_CORE_BUS 20 +#define MOUT_CLKCMU_CPUCL0_SWITCH 21 +#define MOUT_CLKCMU_CPUCL0_CLUSTER 22 +#define MOUT_CLKCMU_CPUCL1_SWITCH 24 +#define MOUT_CLKCMU_CPUCL1_CLUSTER 25 +#define MOUT_CLKCMU_DPTX_BUS 26 +#define MOUT_CLKCMU_DPTX_DPGTC 27 +#define MOUT_CLKCMU_DPUM_BUS 28 +#define MOUT_CLKCMU_DPUS0_BUS 29 +#define MOUT_CLKCMU_DPUS1_BUS 30 +#define MOUT_CLKCMU_FSYS0_BUS 31 +#define MOUT_CLKCMU_FSYS0_PCIE 32 +#define MOUT_CLKCMU_FSYS1_BUS 33 +#define MOUT_CLKCMU_FSYS1_USBDRD 34 +#define MOUT_CLKCMU_FSYS1_MMC_CARD 35 +#define MOUT_CLKCMU_FSYS2_BUS 36 +#define MOUT_CLKCMU_FSYS2_UFS_EMBD 37 +#define MOUT_CLKCMU_FSYS2_ETHERNET 38 +#define MOUT_CLKCMU_G2D_G2D 39 +#define MOUT_CLKCMU_G2D_MSCL 40 +#define MOUT_CLKCMU_G3D00_SWITCH 41 +#define MOUT_CLKCMU_G3D01_SWITCH 42 +#define MOUT_CLKCMU_G3D1_SWITCH 43 +#define MOUT_CLKCMU_ISPB_BUS 44 +#define MOUT_CLKCMU_MFC_MFC 45 +#define MOUT_CLKCMU_MFC_WFD 46 +#define MOUT_CLKCMU_MIF_SWITCH 47 +#define MOUT_CLKCMU_MIF_BUSP 48 +#define MOUT_CLKCMU_NPU_BUS 49 +#define MOUT_CLKCMU_PERIC0_BUS 50 +#define MOUT_CLKCMU_PERIC0_IP 51 +#define MOUT_CLKCMU_PERIC1_BUS 52 +#define MOUT_CLKCMU_PERIC1_IP 53 +#define MOUT_CLKCMU_PERIS_BUS 54 + +/* DIV in CMU_TOP */ +#define DOUT_SHARED0_DIV3 101 +#define DOUT_SHARED0_DIV2 102 +#define DOUT_SHARED1_DIV3 103 +#define DOUT_SHARED1_DIV2 104 +#define DOUT_SHARED1_DIV4 105 +#define DOUT_SHARED2_DIV3 106 +#define DOUT_SHARED2_DIV2 107 +#define DOUT_SHARED2_DIV4 108 +#define DOUT_SHARED4_DIV2 109 +#define DOUT_SHARED4_DIV4 110 +#define DOUT_CLKCMU_CMU_BOOST 111 +#define DOUT_CLKCMU_ACC_BUS 112 +#define DOUT_CLKCMU_APM_BUS 113 +#define DOUT_CLKCMU_AUD_CPU 114 +#define DOUT_CLKCMU_AUD_BUS 115 +#define DOUT_CLKCMU_BUSC_BUS 116 +#define DOUT_CLKCMU_BUSMC_BUS 118 +#define DOUT_CLKCMU_CORE_BUS 119 +#define DOUT_CLKCMU_CPUCL0_SWITCH 120 +#define DOUT_CLKCMU_CPUCL0_CLUSTER 121 +#define DOUT_CLKCMU_CPUCL1_SWITCH 123 +#define DOUT_CLKCMU_CPUCL1_CLUSTER 124 +#define DOUT_CLKCMU_DPTX_BUS 125 +#define DOUT_CLKCMU_DPTX_DPGTC 126 +#define DOUT_CLKCMU_DPUM_BUS 127 +#define DOUT_CLKCMU_DPUS0_BUS 128 +#define DOUT_CLKCMU_DPUS1_BUS 129 +#define DOUT_CLKCMU_FSYS0_BUS 130 +#define DOUT_CLKCMU_FSYS0_PCIE 131 +#define DOUT_CLKCMU_FSYS1_BUS 132 +#define DOUT_CLKCMU_FSYS1_USBDRD 133 +#define DOUT_CLKCMU_FSYS2_BUS 134 +#define DOUT_CLKCMU_FSYS2_UFS_EMBD 135 +#define DOUT_CLKCMU_FSYS2_ETHERNET 136 +#define DOUT_CLKCMU_G2D_G2D 137 +#define DOUT_CLKCMU_G2D_MSCL 138 +#define DOUT_CLKCMU_G3D00_SWITCH 139 +#define DOUT_CLKCMU_G3D01_SWITCH 140 +#define DOUT_CLKCMU_G3D1_SWITCH 141 +#define DOUT_CLKCMU_ISPB_BUS 142 +#define DOUT_CLKCMU_MFC_MFC 143 +#define DOUT_CLKCMU_MFC_WFD 144 +#define DOUT_CLKCMU_MIF_SWITCH 145 +#define DOUT_CLKCMU_MIF_BUSP 146 +#define DOUT_CLKCMU_NPU_BUS 147 +#define DOUT_CLKCMU_PERIC0_BUS 148 +#define DOUT_CLKCMU_PERIC0_IP 149 +#define DOUT_CLKCMU_PERIC1_BUS 150 +#define DOUT_CLKCMU_PERIC1_IP 151 +#define DOUT_CLKCMU_PERIS_BUS 152 + +/* GAT in CMU_TOP */ +#define GOUT_CLKCMU_CMU_BOOST 201 +#define GOUT_CLKCMU_CPUCL0_BOOST 202 +#define GOUT_CLKCMU_CPUCL1_BOOST 203 +#define GOUT_CLKCMU_CORE_BOOST 204 +#define GOUT_CLKCMU_BUSC_BOOST 205 +#define GOUT_CLKCMU_BUSMC_BOOST 206 +#define GOUT_CLKCMU_MIF_BOOST 207 +#define GOUT_CLKCMU_ACC_BUS 208 +#define GOUT_CLKCMU_APM_BUS 209 +#define GOUT_CLKCMU_AUD_CPU 210 +#define GOUT_CLKCMU_AUD_BUS 211 +#define GOUT_CLKCMU_BUSC_BUS 212 +#define GOUT_CLKCMU_BUSMC_BUS 214 +#define GOUT_CLKCMU_CORE_BUS 215 +#define GOUT_CLKCMU_CPUCL0_SWITCH 216 +#define GOUT_CLKCMU_CPUCL0_CLUSTER 217 +#define GOUT_CLKCMU_CPUCL1_SWITCH 219 +#define GOUT_CLKCMU_CPUCL1_CLUSTER 220 +#define GOUT_CLKCMU_DPTX_BUS 221 +#define GOUT_CLKCMU_DPTX_DPGTC 222 +#define GOUT_CLKCMU_DPUM_BUS 223 +#define GOUT_CLKCMU_DPUS0_BUS 224 +#define GOUT_CLKCMU_DPUS1_BUS 225 +#define GOUT_CLKCMU_FSYS0_BUS 226 +#define GOUT_CLKCMU_FSYS0_PCIE 227 +#define GOUT_CLKCMU_FSYS1_BUS 228 +#define GOUT_CLKCMU_FSYS1_USBDRD 229 +#define GOUT_CLKCMU_FSYS1_MMC_CARD 230 +#define GOUT_CLKCMU_FSYS2_BUS 231 +#define GOUT_CLKCMU_FSYS2_UFS_EMBD 232 +#define GOUT_CLKCMU_FSYS2_ETHERNET 233 +#define GOUT_CLKCMU_G2D_G2D 234 +#define GOUT_CLKCMU_G2D_MSCL 235 +#define GOUT_CLKCMU_G3D00_SWITCH 236 +#define GOUT_CLKCMU_G3D01_SWITCH 237 +#define GOUT_CLKCMU_G3D1_SWITCH 238 +#define GOUT_CLKCMU_ISPB_BUS 239 +#define GOUT_CLKCMU_MFC_MFC 240 +#define GOUT_CLKCMU_MFC_WFD 241 +#define GOUT_CLKCMU_MIF_SWITCH 242 +#define GOUT_CLKCMU_MIF_BUSP 243 +#define GOUT_CLKCMU_NPU_BUS 244 +#define GOUT_CLKCMU_PERIC0_BUS 245 +#define GOUT_CLKCMU_PERIC0_IP 246 +#define GOUT_CLKCMU_PERIC1_BUS 247 +#define GOUT_CLKCMU_PERIC1_IP 248 +#define GOUT_CLKCMU_PERIS_BUS 249 + +#define TOP_NR_CLK 250 + +/* CMU_BUSMC */ +#define CLK_MOUT_BUSMC_BUS_USER 1 +#define CLK_DOUT_BUSMC_BUSP 2 +#define CLK_GOUT_BUSMC_PDMA0_PCLK 3 +#define CLK_GOUT_BUSMC_SPDMA_PCLK 4 + +#define BUSMC_NR_CLK 5 + +/* CMU_CORE */ +#define CLK_MOUT_CORE_BUS_USER 1 +#define CLK_DOUT_CORE_BUSP 2 +#define CLK_GOUT_CORE_CCI_CLK 3 +#define CLK_GOUT_CORE_CCI_PCLK 4 +#define CLK_GOUT_CORE_CMU_CORE_PCLK 5 + +#define CORE_NR_CLK 6 + +/* CMU_FSYS2 */ +#define CLK_MOUT_FSYS2_BUS_USER 1 +#define CLK_MOUT_FSYS2_UFS_EMBD_USER 2 +#define CLK_MOUT_FSYS2_ETHERNET_USER 3 +#define CLK_GOUT_FSYS2_UFS_EMBD0_ACLK 4 +#define CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO 5 +#define CLK_GOUT_FSYS2_UFS_EMBD1_ACLK 6 +#define CLK_GOUT_FSYS2_UFS_EMBD1_UNIPRO 7 + +#define FSYS2_NR_CLK 8 + +/* CMU_PERIC0 */ +#define CLK_MOUT_PERIC0_BUS_USER 1 +#define CLK_MOUT_PERIC0_IP_USER 2 +#define CLK_MOUT_PERIC0_USI00_USI 3 +#define CLK_MOUT_PERIC0_USI01_USI 4 +#define CLK_MOUT_PERIC0_USI02_USI 5 +#define CLK_MOUT_PERIC0_USI03_USI 6 +#define CLK_MOUT_PERIC0_USI04_USI 7 +#define CLK_MOUT_PERIC0_USI05_USI 8 +#define CLK_MOUT_PERIC0_USI_I2C 9 + +#define CLK_DOUT_PERIC0_USI00_USI 10 +#define CLK_DOUT_PERIC0_USI01_USI 11 +#define CLK_DOUT_PERIC0_USI02_USI 12 +#define CLK_DOUT_PERIC0_USI03_USI 13 +#define CLK_DOUT_PERIC0_USI04_USI 14 +#define CLK_DOUT_PERIC0_USI05_USI 15 +#define CLK_DOUT_PERIC0_USI_I2C 16 + +#define CLK_GOUT_PERIC0_IPCLK_0 20 +#define CLK_GOUT_PERIC0_IPCLK_1 21 +#define CLK_GOUT_PERIC0_IPCLK_2 22 +#define CLK_GOUT_PERIC0_IPCLK_3 23 +#define CLK_GOUT_PERIC0_IPCLK_4 24 +#define CLK_GOUT_PERIC0_IPCLK_5 25 +#define CLK_GOUT_PERIC0_IPCLK_6 26 +#define CLK_GOUT_PERIC0_IPCLK_7 27 +#define CLK_GOUT_PERIC0_IPCLK_8 28 +#define CLK_GOUT_PERIC0_IPCLK_9 29 +#define CLK_GOUT_PERIC0_IPCLK_10 30 +#define CLK_GOUT_PERIC0_IPCLK_11 30 +#define CLK_GOUT_PERIC0_PCLK_0 31 +#define CLK_GOUT_PERIC0_PCLK_1 32 +#define CLK_GOUT_PERIC0_PCLK_2 33 +#define CLK_GOUT_PERIC0_PCLK_3 34 +#define CLK_GOUT_PERIC0_PCLK_4 35 +#define CLK_GOUT_PERIC0_PCLK_5 36 +#define CLK_GOUT_PERIC0_PCLK_6 37 +#define CLK_GOUT_PERIC0_PCLK_7 38 +#define CLK_GOUT_PERIC0_PCLK_8 39 +#define CLK_GOUT_PERIC0_PCLK_9 40 +#define CLK_GOUT_PERIC0_PCLK_10 41 +#define CLK_GOUT_PERIC0_PCLK_11 42 + +#define PERIC0_NR_CLK 43 + +/* CMU_PERIC1 */ +#define CLK_MOUT_PERIC1_BUS_USER 1 +#define CLK_MOUT_PERIC1_IP_USER 2 +#define CLK_MOUT_PERIC1_USI06_USI 3 +#define CLK_MOUT_PERIC1_USI07_USI 4 +#define CLK_MOUT_PERIC1_USI08_USI 5 +#define CLK_MOUT_PERIC1_USI09_USI 6 +#define CLK_MOUT_PERIC1_USI10_USI 7 +#define CLK_MOUT_PERIC1_USI11_USI 8 +#define CLK_MOUT_PERIC1_USI_I2C 9 + +#define CLK_DOUT_PERIC1_USI06_USI 10 +#define CLK_DOUT_PERIC1_USI07_USI 11 +#define CLK_DOUT_PERIC1_USI08_USI 12 +#define CLK_DOUT_PERIC1_USI09_USI 13 +#define CLK_DOUT_PERIC1_USI10_USI 14 +#define CLK_DOUT_PERIC1_USI11_USI 15 +#define CLK_DOUT_PERIC1_USI_I2C 16 + +#define CLK_GOUT_PERIC1_IPCLK_0 20 +#define CLK_GOUT_PERIC1_IPCLK_1 21 +#define CLK_GOUT_PERIC1_IPCLK_2 22 +#define CLK_GOUT_PERIC1_IPCLK_3 23 +#define CLK_GOUT_PERIC1_IPCLK_4 24 +#define CLK_GOUT_PERIC1_IPCLK_5 25 +#define CLK_GOUT_PERIC1_IPCLK_6 26 +#define CLK_GOUT_PERIC1_IPCLK_7 27 +#define CLK_GOUT_PERIC1_IPCLK_8 28 +#define CLK_GOUT_PERIC1_IPCLK_9 29 +#define CLK_GOUT_PERIC1_IPCLK_10 30 +#define CLK_GOUT_PERIC1_IPCLK_11 30 +#define CLK_GOUT_PERIC1_PCLK_0 31 +#define CLK_GOUT_PERIC1_PCLK_1 32 +#define CLK_GOUT_PERIC1_PCLK_2 33 +#define CLK_GOUT_PERIC1_PCLK_3 34 +#define CLK_GOUT_PERIC1_PCLK_4 35 +#define CLK_GOUT_PERIC1_PCLK_5 36 +#define CLK_GOUT_PERIC1_PCLK_6 37 +#define CLK_GOUT_PERIC1_PCLK_7 38 +#define CLK_GOUT_PERIC1_PCLK_8 39 +#define CLK_GOUT_PERIC1_PCLK_9 40 +#define CLK_GOUT_PERIC1_PCLK_10 41 +#define CLK_GOUT_PERIC1_PCLK_11 42 + +#define PERIC1_NR_CLK 43 + +/* CMU_PERIS */ +#define CLK_MOUT_PERIS_BUS_USER 1 +#define CLK_GOUT_SYSREG_PERIS_PCLK 2 +#define CLK_GOUT_WDT_CLUSTER0 3 +#define CLK_GOUT_WDT_CLUSTER1 4 + +#define PERIS_NR_CLK 5 + +#endif /* _DT_BINDINGS_CLOCK_EXYNOSAUTOV9_H */ diff --git a/dts/include/dt-bindings/clock/ste-db8500-clkout.h b/dts/include/dt-bindings/clock/ste-db8500-clkout.h new file mode 100644 index 0000000000..ca07cb2bd1 --- /dev/null +++ b/dts/include/dt-bindings/clock/ste-db8500-clkout.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __STE_CLK_DB8500_CLKOUT_H__ +#define __STE_CLK_DB8500_CLKOUT_H__ + +#define DB8500_CLKOUT_1 0 +#define DB8500_CLKOUT_2 1 + +#define DB8500_CLKOUT_SRC_CLK38M 0 +#define DB8500_CLKOUT_SRC_ACLK 1 +#define DB8500_CLKOUT_SRC_SYSCLK 2 +#define DB8500_CLKOUT_SRC_LCDCLK 3 +#define DB8500_CLKOUT_SRC_SDMMCCLK 4 +#define DB8500_CLKOUT_SRC_TVCLK 5 +#define DB8500_CLKOUT_SRC_TIMCLK 6 +#define DB8500_CLKOUT_SRC_CLK009 7 + +#endif diff --git a/dts/include/dt-bindings/clock/stm32mp1-clks.h b/dts/include/dt-bindings/clock/stm32mp1-clks.h index e02770b98e..25e8cfd434 100644 --- a/dts/include/dt-bindings/clock/stm32mp1-clks.h +++ b/dts/include/dt-bindings/clock/stm32mp1-clks.h @@ -249,30 +249,26 @@ #define STM32MP1_LAST_CLK 232 /* SCMI clock identifiers */ -#define CK_SCMI0_HSE 0 -#define CK_SCMI0_HSI 1 -#define CK_SCMI0_CSI 2 -#define CK_SCMI0_LSE 3 -#define CK_SCMI0_LSI 4 -#define CK_SCMI0_PLL2_Q 5 -#define CK_SCMI0_PLL2_R 6 -#define CK_SCMI0_MPU 7 -#define CK_SCMI0_AXI 8 -#define CK_SCMI0_BSEC 9 -#define CK_SCMI0_CRYP1 10 -#define CK_SCMI0_GPIOZ 11 -#define CK_SCMI0_HASH1 12 -#define CK_SCMI0_I2C4 13 -#define CK_SCMI0_I2C6 14 -#define CK_SCMI0_IWDG1 15 -#define CK_SCMI0_RNG1 16 -#define CK_SCMI0_RTC 17 -#define CK_SCMI0_RTCAPB 18 -#define CK_SCMI0_SPI6 19 -#define CK_SCMI0_USART1 20 - -#define CK_SCMI1_PLL3_Q 0 -#define CK_SCMI1_PLL3_R 1 -#define CK_SCMI1_MCU 2 +#define CK_SCMI_HSE 0 +#define CK_SCMI_HSI 1 +#define CK_SCMI_CSI 2 +#define CK_SCMI_LSE 3 +#define CK_SCMI_LSI 4 +#define CK_SCMI_PLL2_Q 5 +#define CK_SCMI_PLL2_R 6 +#define CK_SCMI_MPU 7 +#define CK_SCMI_AXI 8 +#define CK_SCMI_BSEC 9 +#define CK_SCMI_CRYP1 10 +#define CK_SCMI_GPIOZ 11 +#define CK_SCMI_HASH1 12 +#define CK_SCMI_I2C4 13 +#define CK_SCMI_I2C6 14 +#define CK_SCMI_IWDG1 15 +#define CK_SCMI_RNG1 16 +#define CK_SCMI_RTC 17 +#define CK_SCMI_RTCAPB 18 +#define CK_SCMI_SPI6 19 +#define CK_SCMI_USART1 20 #endif /* _DT_BINDINGS_STM32MP1_CLKS_H_ */ diff --git a/dts/include/dt-bindings/clock/stm32mp13-clks.h b/dts/include/dt-bindings/clock/stm32mp13-clks.h new file mode 100644 index 0000000000..02befd25ed --- /dev/null +++ b/dts/include/dt-bindings/clock/stm32mp13-clks.h @@ -0,0 +1,229 @@ +/* SPDX-License-Identifier: GPL-2.0+ or BSD-3-Clause */ +/* + * Copyright (C) STMicroelectronics 2020 - All Rights Reserved + * Author: Gabriel Fernandez for STMicroelectronics. + */ + +#ifndef _DT_BINDINGS_STM32MP13_CLKS_H_ +#define _DT_BINDINGS_STM32MP13_CLKS_H_ + +/* OSCILLATOR clocks */ +#define CK_HSE 0 +#define CK_CSI 1 +#define CK_LSI 2 +#define CK_LSE 3 +#define CK_HSI 4 +#define CK_HSE_DIV2 5 + +/* PLL */ +#define PLL1 6 +#define PLL2 7 +#define PLL3 8 +#define PLL4 9 + +/* ODF */ +#define PLL1_P 10 +#define PLL1_Q 11 +#define PLL1_R 12 +#define PLL2_P 13 +#define PLL2_Q 14 +#define PLL2_R 15 +#define PLL3_P 16 +#define PLL3_Q 17 +#define PLL3_R 18 +#define PLL4_P 19 +#define PLL4_Q 20 +#define PLL4_R 21 + +#define PCLK1 22 +#define PCLK2 23 +#define PCLK3 24 +#define PCLK4 25 +#define PCLK5 26 +#define PCLK6 27 + +/* SYSTEM CLOCK */ +#define CK_PER 28 +#define CK_MPU 29 +#define CK_AXI 30 +#define CK_MLAHB 31 + +/* BASE TIMER */ +#define CK_TIMG1 32 +#define CK_TIMG2 33 +#define CK_TIMG3 34 + +/* AUX */ +#define RTC 35 + +/* TRACE & DEBUG clocks */ +#define CK_DBG 36 +#define CK_TRACE 37 + +/* MCO clocks */ +#define CK_MCO1 38 +#define CK_MCO2 39 + +/* IP clocks */ +#define SYSCFG 40 +#define VREF 41 +#define DTS 42 +#define PMBCTRL 43 +#define HDP 44 +#define IWDG2 45 +#define STGENRO 46 +#define USART1 47 +#define RTCAPB 48 +#define TZC 49 +#define TZPC 50 +#define IWDG1 51 +#define BSEC 52 +#define DMA1 53 +#define DMA2 54 +#define DMAMUX1 55 +#define DMAMUX2 56 +#define GPIOA 57 +#define GPIOB 58 +#define GPIOC 59 +#define GPIOD 60 +#define GPIOE 61 +#define GPIOF 62 +#define GPIOG 63 +#define GPIOH 64 +#define GPIOI 65 +#define CRYP1 66 +#define HASH1 67 +#define BKPSRAM 68 +#define MDMA 69 +#define CRC1 70 +#define USBH 71 +#define DMA3 72 +#define TSC 73 +#define PKA 74 +#define AXIMC 75 +#define MCE 76 +#define ETH1TX 77 +#define ETH2TX 78 +#define ETH1RX 79 +#define ETH2RX 80 +#define ETH1MAC 81 +#define ETH2MAC 82 +#define ETH1STP 83 +#define ETH2STP 84 + +/* IP clocks with parents */ +#define SDMMC1_K 85 +#define SDMMC2_K 86 +#define ADC1_K 87 +#define ADC2_K 88 +#define FMC_K 89 +#define QSPI_K 90 +#define RNG1_K 91 +#define USBPHY_K 92 +#define STGEN_K 93 +#define SPDIF_K 94 +#define SPI1_K 95 +#define SPI2_K 96 +#define SPI3_K 97 +#define SPI4_K 98 +#define SPI5_K 99 +#define I2C1_K 100 +#define I2C2_K 101 +#define I2C3_K 102 +#define I2C4_K 103 +#define I2C5_K 104 +#define TIM2_K 105 +#define TIM3_K 106 +#define TIM4_K 107 +#define TIM5_K 108 +#define TIM6_K 109 +#define TIM7_K 110 +#define TIM12_K 111 +#define TIM13_K 112 +#define TIM14_K 113 +#define TIM1_K 114 +#define TIM8_K 115 +#define TIM15_K 116 +#define TIM16_K 117 +#define TIM17_K 118 +#define LPTIM1_K 119 +#define LPTIM2_K 120 +#define LPTIM3_K 121 +#define LPTIM4_K 122 +#define LPTIM5_K 123 +#define USART1_K 124 +#define USART2_K 125 +#define USART3_K 126 +#define UART4_K 127 +#define UART5_K 128 +#define USART6_K 129 +#define UART7_K 130 +#define UART8_K 131 +#define DFSDM_K 132 +#define FDCAN_K 133 +#define SAI1_K 134 +#define SAI2_K 135 +#define ADFSDM_K 136 +#define USBO_K 137 +#define LTDC_PX 138 +#define ETH1CK_K 139 +#define ETH1PTP_K 140 +#define ETH2CK_K 141 +#define ETH2PTP_K 142 +#define DCMIPP_K 143 +#define SAES_K 144 +#define DTS_K 145 + +/* DDR */ +#define DDRC1 146 +#define DDRC1LP 147 +#define DDRC2 148 +#define DDRC2LP 149 +#define DDRPHYC 150 +#define DDRPHYCLP 151 +#define DDRCAPB 152 +#define DDRCAPBLP 153 +#define AXIDCG 154 +#define DDRPHYCAPB 155 +#define DDRPHYCAPBLP 156 +#define DDRPERFM 157 + +#define ADC1 158 +#define ADC2 159 +#define SAI1 160 +#define SAI2 161 + +#define STM32MP1_LAST_CLK 162 + +/* SCMI clock identifiers */ +#define CK_SCMI_HSE 0 +#define CK_SCMI_HSI 1 +#define CK_SCMI_CSI 2 +#define CK_SCMI_LSE 3 +#define CK_SCMI_LSI 4 +#define CK_SCMI_HSE_DIV2 5 +#define CK_SCMI_PLL2_Q 6 +#define CK_SCMI_PLL2_R 7 +#define CK_SCMI_PLL3_P 8 +#define CK_SCMI_PLL3_Q 9 +#define CK_SCMI_PLL3_R 10 +#define CK_SCMI_PLL4_P 11 +#define CK_SCMI_PLL4_Q 12 +#define CK_SCMI_PLL4_R 13 +#define CK_SCMI_MPU 14 +#define CK_SCMI_AXI 15 +#define CK_SCMI_MLAHB 16 +#define CK_SCMI_CKPER 17 +#define CK_SCMI_PCLK1 18 +#define CK_SCMI_PCLK2 19 +#define CK_SCMI_PCLK3 20 +#define CK_SCMI_PCLK4 21 +#define CK_SCMI_PCLK5 22 +#define CK_SCMI_PCLK6 23 +#define CK_SCMI_CKTIMG1 24 +#define CK_SCMI_CKTIMG2 25 +#define CK_SCMI_CKTIMG3 26 +#define CK_SCMI_RTC 27 +#define CK_SCMI_RTCAPB 28 + +#endif /* _DT_BINDINGS_STM32MP13_CLKS_H_ */ diff --git a/dts/include/dt-bindings/clock/sun50i-h6-r-ccu.h b/dts/include/dt-bindings/clock/sun50i-h6-r-ccu.h index 890368d252..a96087abc8 100644 --- a/dts/include/dt-bindings/clock/sun50i-h6-r-ccu.h +++ b/dts/include/dt-bindings/clock/sun50i-h6-r-ccu.h @@ -22,5 +22,6 @@ #define CLK_W1 12 #define CLK_R_APB2_RSB 13 +#define CLK_R_APB1_RTC 14 #endif /* _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_ */ diff --git a/dts/include/dt-bindings/clock/sun50i-h616-ccu.h b/dts/include/dt-bindings/clock/sun50i-h616-ccu.h index 4fc08b0df2..1191aca53a 100644 --- a/dts/include/dt-bindings/clock/sun50i-h616-ccu.h +++ b/dts/include/dt-bindings/clock/sun50i-h616-ccu.h @@ -111,5 +111,6 @@ #define CLK_BUS_TVE0 125 #define CLK_HDCP 126 #define CLK_BUS_HDCP 127 +#define CLK_PLL_SYSTEM_32K 128 #endif /* _DT_BINDINGS_CLK_SUN50I_H616_H_ */ diff --git a/dts/include/dt-bindings/clock/tegra234-clock.h b/dts/include/dt-bindings/clock/tegra234-clock.h index 8cae969e8c..bd4c3086a2 100644 --- a/dts/include/dt-bindings/clock/tegra234-clock.h +++ b/dts/include/dt-bindings/clock/tegra234-clock.h @@ -140,6 +140,14 @@ #define TEGRA234_CLK_PEX2_C9_CORE 173U /** @brief output of gate CLK_ENB_PEX2_CORE_10 */ #define TEGRA234_CLK_PEX2_C10_CORE 187U +/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 switch divider output */ +#define TEGRA234_CLK_QSPI0_2X_PM 192U +/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 switch divider output */ +#define TEGRA234_CLK_QSPI1_2X_PM 193U +/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 */ +#define TEGRA234_CLK_QSPI0_PM 194U +/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 */ +#define TEGRA234_CLK_QSPI1_PM 195U /** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM switch divider output */ #define TEGRA234_CLK_SDMMC_LEGACY_TM 219U /** @brief output of gate CLK_ENB_PEX0_CORE_0 */ diff --git a/dts/include/dt-bindings/gce/mt8186-gce.h b/dts/include/dt-bindings/gce/mt8186-gce.h new file mode 100644 index 0000000000..f12e3cb586 --- /dev/null +++ b/dts/include/dt-bindings/gce/mt8186-gce.h @@ -0,0 +1,421 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (C) 2022 MediaTek Inc. + * Author: Yongqiang Niu + */ + +#ifndef _DT_BINDINGS_GCE_MT8186_H +#define _DT_BINDINGS_GCE_MT8186_H + +/* assign timeout 0 also means default */ +#define CMDQ_NO_TIMEOUT 0xffffffff +#define CMDQ_TIMEOUT_DEFAULT 1000 + +/* GCE thread priority */ +#define CMDQ_THR_PRIO_LOWEST 0 +#define CMDQ_THR_PRIO_1 1 +#define CMDQ_THR_PRIO_2 2 +#define CMDQ_THR_PRIO_3 3 +#define CMDQ_THR_PRIO_4 4 +#define CMDQ_THR_PRIO_5 5 +#define CMDQ_THR_PRIO_6 6 +#define CMDQ_THR_PRIO_HIGHEST 7 + +/* CPR count in 32bit register */ +#define GCE_CPR_COUNT 1312 + +/* GCE subsys table */ +#define SUBSYS_1300XXXX 0 +#define SUBSYS_1400XXXX 1 +#define SUBSYS_1401XXXX 2 +#define SUBSYS_1402XXXX 3 +#define SUBSYS_1502XXXX 4 +#define SUBSYS_1582XXXX 5 +#define SUBSYS_1B00XXXX 6 +#define SUBSYS_1C00XXXX 7 +#define SUBSYS_1C10XXXX 8 +#define SUBSYS_1000XXXX 9 +#define SUBSYS_1001XXXX 10 +#define SUBSYS_1020XXXX 11 +#define SUBSYS_1021XXXX 12 +#define SUBSYS_1022XXXX 13 +#define SUBSYS_1023XXXX 14 +#define SUBSYS_1060XXXX 15 +#define SUBSYS_1602XXXX 16 +#define SUBSYS_1608XXXX 17 +#define SUBSYS_1700XXXX 18 +#define SUBSYS_1701XXXX 19 +#define SUBSYS_1702XXXX 20 +#define SUBSYS_1703XXXX 21 +#define SUBSYS_1706XXXX 22 +#define SUBSYS_1A00XXXX 23 +#define SUBSYS_1A01XXXX 24 +#define SUBSYS_1A02XXXX 25 +#define SUBSYS_1A03XXXX 26 +#define SUBSYS_1A04XXXX 27 +#define SUBSYS_1A05XXXX 28 +#define SUBSYS_1A06XXXX 29 +#define SUBSYS_NO_SUPPORT 99 + +/* GCE General Purpose Register (GPR) support + * Leave note for scenario usage here + */ +/* GCE: write mask */ +#define GCE_GPR_R00 0x00 +#define GCE_GPR_R01 0x01 +/* MDP: P1: JPEG dest */ +#define GCE_GPR_R02 0x02 +#define GCE_GPR_R03 0x03 +/* MDP: PQ color */ +#define GCE_GPR_R04 0x04 +/* MDP: 2D sharpness */ +#define GCE_GPR_R05 0x05 +/* DISP: poll esd */ +#define GCE_GPR_R06 0x06 +#define GCE_GPR_R07 0x07 +/* MDP: P4: 2D sharpness dst */ +#define GCE_GPR_R08 0x08 +#define GCE_GPR_R09 0x09 +/* VCU: poll with timeout for GPR timer */ +#define GCE_GPR_R10 0x0A +#define GCE_GPR_R11 0x0B +/* CMDQ: debug */ +#define GCE_GPR_R12 0x0C +#define GCE_GPR_R13 0x0D +/* CMDQ: P7: debug */ +#define GCE_GPR_R14 0x0E +#define GCE_GPR_R15 0x0F + +/* GCE hardware events */ +/* VDEC */ +#define CMDQ_EVENT_LINE_COUNT_THRESHOLD_INTERRUPT 0 +#define CMDQ_EVENT_VDEC_INT 1 +#define CMDQ_EVENT_VDEC_PAUSE 2 +#define CMDQ_EVENT_VDEC_DEC_ERROR 3 +#define CMDQ_EVENT_MDEC_TIMEOUT 4 +#define CMDQ_EVENT_DRAM_ACCESS_DONE 5 +#define CMDQ_EVENT_INI_FETCH_RDY 6 +#define CMDQ_EVENT_PROCESS_FLAG 7 +#define CMDQ_EVENT_SEARCH_START_CODE_DONE 8 +#define CMDQ_EVENT_REF_REORDER_DONE 9 +#define CMDQ_EVENT_WP_TBLE_DONE 10 +#define CMDQ_EVENT_COUNT_SRAM_CLR_DONE 11 +#define CMDQ_EVENT_GCE_CNT_OP_THRESHOLD 15 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_0 16 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_1 17 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_2 18 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_3 19 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_4 20 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_5 21 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_6 22 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_7 23 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_8 24 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_9 25 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_10 26 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_11 27 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_12 28 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_13 29 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_14 30 +#define CMDQ_EVENT_VDEC_MINI_MDP_EVENT_15 31 +#define CMDQ_EVENT_WPE_GCE_FRAME_DONE 32 + +/* CAM */ +#define CMDQ_EVENT_ISP_FRAME_DONE_A 65 +#define CMDQ_EVENT_ISP_FRAME_DONE_B 66 +#define CMDQ_EVENT_CAMSV1_PASS1_DONE 70 +#define CMDQ_EVENT_CAMSV2_PASS1_DONE 71 +#define CMDQ_EVENT_CAMSV3_PASS1_DONE 72 +#define CMDQ_EVENT_MRAW_0_PASS1_DONE 73 +#define CMDQ_EVENT_SENINF_CAM0_FIFO_FULL 75 +#define CMDQ_EVENT_SENINF_CAM1_FIFO_FULL 76 +#define CMDQ_EVENT_SENINF_CAM2_FIFO_FULL 77 +#define CMDQ_EVENT_SENINF_CAM3_FIFO_FULL 78 +#define CMDQ_EVENT_SENINF_CAM4_FIFO_FULL 79 +#define CMDQ_EVENT_SENINF_CAM5_FIFO_FULL 80 +#define CMDQ_EVENT_SENINF_CAM6_FIFO_FULL 81 +#define CMDQ_EVENT_SENINF_CAM7_FIFO_FULL 82 +#define CMDQ_EVENT_SENINF_CAM8_FIFO_FULL 83 +#define CMDQ_EVENT_SENINF_CAM9_FIFO_FULL 84 +#define CMDQ_EVENT_SENINF_CAM10_FIFO_FULL 85 +#define CMDQ_EVENT_SENINF_CAM11_FIFO_FULL 86 +#define CMDQ_EVENT_SENINF_CAM12_FIFO_FULL 87 +#define CMDQ_EVENT_TG_OVRUN_A_INT 88 +#define CMDQ_EVENT_DMA_R1_ERROR_A_INT 89 +#define CMDQ_EVENT_TG_OVRUN_B_INT 90 +#define CMDQ_EVENT_DMA_R1_ERROR_B_INT 91 +#define CMDQ_EVENT_TG_OVRUN_M0_INT 94 +#define CMDQ_EVENT_R1_ERROR_M0_INT 95 +#define CMDQ_EVENT_TG_GRABERR_M0_INT 96 +#define CMDQ_EVENT_TG_GRABERR_A_INT 98 +#define CMDQ_EVENT_CQ_VR_SNAP_A_INT 99 +#define CMDQ_EVENT_TG_GRABERR_B_INT 100 +#define CMDQ_EVENT_CQ_VR_SNAP_B_INT 101 +/* VENC */ +#define CMDQ_EVENT_VENC_CMDQ_FRAME_DONE 129 +#define CMDQ_EVENT_VENC_CMDQ_PAUSE_DONE 130 +#define CMDQ_EVENT_JPGENC_CMDQ_DONE 131 +#define CMDQ_EVENT_VENC_CMDQ_MB_DONE 132 +#define CMDQ_EVENT_VENC_CMDQ_128BYTE_CNT_DONE 133 +#define CMDQ_EVENT_VENC_CMDQ_PPS_DONE 136 +#define CMDQ_EVENT_VENC_CMDQ_SPS_DONE 137 +#define CMDQ_EVENT_VENC_CMDQ_VPS_DONE 138 +/* IPE */ +#define CMDQ_EVENT_FDVT_DONE 161 +#define CMDQ_EVENT_FE_DONE 162 +#define CMDQ_EVENT_RSC_DONE 163 +#define CMDQ_EVENT_DVS_DONE_ASYNC_SHOT 164 +#define CMDQ_EVENT_DVP_DONE_ASYNC_SHOT 165 +/* IMG2 */ +#define CMDQ_EVENT_GCE_IMG2_EVENT0 193 +#define CMDQ_EVENT_GCE_IMG2_EVENT1 194 +#define CMDQ_EVENT_GCE_IMG2_EVENT2 195 +#define CMDQ_EVENT_GCE_IMG2_EVENT3 196 +#define CMDQ_EVENT_GCE_IMG2_EVENT4 197 +#define CMDQ_EVENT_GCE_IMG2_EVENT5 198 +#define CMDQ_EVENT_GCE_IMG2_EVENT6 199 +#define CMDQ_EVENT_GCE_IMG2_EVENT7 200 +#define CMDQ_EVENT_GCE_IMG2_EVENT8 201 +#define CMDQ_EVENT_GCE_IMG2_EVENT9 202 +#define CMDQ_EVENT_GCE_IMG2_EVENT10 203 +#define CMDQ_EVENT_GCE_IMG2_EVENT11 204 +#define CMDQ_EVENT_GCE_IMG2_EVENT12 205 +#define CMDQ_EVENT_GCE_IMG2_EVENT13 206 +#define CMDQ_EVENT_GCE_IMG2_EVENT14 207 +#define CMDQ_EVENT_GCE_IMG2_EVENT15 208 +#define CMDQ_EVENT_GCE_IMG2_EVENT16 209 +#define CMDQ_EVENT_GCE_IMG2_EVENT17 210 +#define CMDQ_EVENT_GCE_IMG2_EVENT18 211 +#define CMDQ_EVENT_GCE_IMG2_EVENT19 212 +#define CMDQ_EVENT_GCE_IMG2_EVENT20 213 +#define CMDQ_EVENT_GCE_IMG2_EVENT21 214 +#define CMDQ_EVENT_GCE_IMG2_EVENT22 215 +#define CMDQ_EVENT_GCE_IMG2_EVENT23 216 +/* IMG1 */ +#define CMDQ_EVENT_GCE_IMG1_EVENT0 225 +#define CMDQ_EVENT_GCE_IMG1_EVENT1 226 +#define CMDQ_EVENT_GCE_IMG1_EVENT2 227 +#define CMDQ_EVENT_GCE_IMG1_EVENT3 228 +#define CMDQ_EVENT_GCE_IMG1_EVENT4 229 +#define CMDQ_EVENT_GCE_IMG1_EVENT5 230 +#define CMDQ_EVENT_GCE_IMG1_EVENT6 231 +#define CMDQ_EVENT_GCE_IMG1_EVENT7 232 +#define CMDQ_EVENT_GCE_IMG1_EVENT8 233 +#define CMDQ_EVENT_GCE_IMG1_EVENT9 234 +#define CMDQ_EVENT_GCE_IMG1_EVENT10 235 +#define CMDQ_EVENT_GCE_IMG1_EVENT11 236 +#define CMDQ_EVENT_GCE_IMG1_EVENT12 237 +#define CMDQ_EVENT_GCE_IMG1_EVENT13 238 +#define CMDQ_EVENT_GCE_IMG1_EVENT14 239 +#define CMDQ_EVENT_GCE_IMG1_EVENT15 240 +#define CMDQ_EVENT_GCE_IMG1_EVENT16 241 +#define CMDQ_EVENT_GCE_IMG1_EVENT17 242 +#define CMDQ_EVENT_GCE_IMG1_EVENT18 243 +#define CMDQ_EVENT_GCE_IMG1_EVENT19 244 +#define CMDQ_EVENT_GCE_IMG1_EVENT20 245 +#define CMDQ_EVENT_GCE_IMG1_EVENT21 246 +#define CMDQ_EVENT_GCE_IMG1_EVENT22 247 +#define CMDQ_EVENT_GCE_IMG1_EVENT23 248 +/* MDP */ +#define CMDQ_EVENT_MDP_RDMA0_SOF 256 +#define CMDQ_EVENT_MDP_RDMA1_SOF 257 +#define CMDQ_EVENT_MDP_AAL0_SOF 258 +#define CMDQ_EVENT_MDP_AAL1_SOF 259 +#define CMDQ_EVENT_MDP_HDR0_SOF 260 +#define CMDQ_EVENT_MDP_RSZ0_SOF 261 +#define CMDQ_EVENT_MDP_RSZ1_SOF 262 +#define CMDQ_EVENT_MDP_WROT0_SOF 263 +#define CMDQ_EVENT_MDP_WROT1_SOF 264 +#define CMDQ_EVENT_MDP_TDSHP0_SOF 265 +#define CMDQ_EVENT_MDP_TDSHP1_SOF 266 +#define CMDQ_EVENT_IMG_DL_RELAY0_SOF 267 +#define CMDQ_EVENT_IMG_DL_RELAY1_SOF 268 +#define CMDQ_EVENT_MDP_COLOR0_SOF 269 +#define CMDQ_EVENT_MDP_WROT3_FRAME_DONE 288 +#define CMDQ_EVENT_MDP_WROT2_FRAME_DONE 289 +#define CMDQ_EVENT_MDP_WROT1_FRAME_DONE 290 +#define CMDQ_EVENT_MDP_WROT0_FRAME_DONE 291 +#define CMDQ_EVENT_MDP_TDSHP3_FRAME_DONE 292 +#define CMDQ_EVENT_MDP_TDSHP2_FRAME_DONE 293 +#define CMDQ_EVENT_MDP_TDSHP1_FRAME_DONE 294 +#define CMDQ_EVENT_MDP_TDSHP0_FRAME_DONE 295 +#define CMDQ_EVENT_MDP_RSZ3_FRAME_DONE 296 +#define CMDQ_EVENT_MDP_RSZ2_FRAME_DONE 297 +#define CMDQ_EVENT_MDP_RSZ1_FRAME_DONE 298 +#define CMDQ_EVENT_MDP_RSZ0_FRAME_DONE 299 +#define CMDQ_EVENT_MDP_RDMA3_FRAME_DONE 300 +#define CMDQ_EVENT_MDP_RDMA2_FRAME_DONE 301 +#define CMDQ_EVENT_MDP_RDMA1_FRAME_DONE 302 +#define CMDQ_EVENT_MDP_RDMA0_FRAME_DONE 303 +#define CMDQ_EVENT_MDP_HDR1_FRAME_DONE 304 +#define CMDQ_EVENT_MDP_HDR0_FRAME_DONE 305 +#define CMDQ_EVENT_MDP_COLOR0_FRAME_DONE 306 +#define CMDQ_EVENT_MDP_AAL3_FRAME_DONE 307 +#define CMDQ_EVENT_MDP_AAL2_FRAME_DONE 308 +#define CMDQ_EVENT_MDP_AAL1_FRAME_DONE 309 +#define CMDQ_EVENT_MDP_AAL0_FRAME_DONE 310 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_0 320 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_1 321 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_2 322 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_3 323 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_4 324 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_5 325 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_6 326 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_7 327 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_8 328 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_9 329 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_10 330 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_11 331 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_12 332 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_13 333 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_14 334 +#define CMDQ_EVENT_MDP_STREAM_DONE_ENG_EVENT_15 335 +#define CMDQ_EVENT_MDP_WROT3_SW_RST_DONE_ENG_EVENT 336 +#define CMDQ_EVENT_MDP_WROT2_SW_RST_DONE_ENG_EVENT 337 +#define CMDQ_EVENT_MDP_WROT1_SW_RST_DONE_ENG_EVENT 338 +#define CMDQ_EVENT_MDP_WROT0_SW_RST_DONE_ENG_EVENT 339 +#define CMDQ_EVENT_MDP_RDMA3_SW_RST_DONE_ENG_EVENT 340 +#define CMDQ_EVENT_MDP_RDMA2_SW_RST_DONE_ENG_EVENT 341 +#define CMDQ_EVENT_MDP_RDMA1_SW_RST_DONE_ENG_EVENT 342 +#define CMDQ_EVENT_MDP_RDMA0_SW_RST_DONE_ENG_EVENT 343 +/* DISP */ +#define CMDQ_EVENT_DISP_OVL0_SOF 384 +#define CMDQ_EVENT_DISP_OVL0_2L_SOF 385 +#define CMDQ_EVENT_DISP_RDMA0_SOF 386 +#define CMDQ_EVENT_DISP_RSZ0_SOF 387 +#define CMDQ_EVENT_DISP_COLOR0_SOF 388 +#define CMDQ_EVENT_DISP_CCORR0_SOF 389 +#define CMDQ_EVENT_DISP_CCORR1_SOF 390 +#define CMDQ_EVENT_DISP_AAL0_SOF 391 +#define CMDQ_EVENT_DISP_GAMMA0_SOF 392 +#define CMDQ_EVENT_DISP_POSTMASK0_SOF 393 +#define CMDQ_EVENT_DISP_DITHER0_SOF 394 +#define CMDQ_EVENT_DISP_CM0_SOF 395 +#define CMDQ_EVENT_DISP_SPR0_SOF 396 +#define CMDQ_EVENT_DISP_DSC_WRAP0_SOF 397 +#define CMDQ_EVENT_DSI0_SOF 398 +#define CMDQ_EVENT_DISP_WDMA0_SOF 399 +#define CMDQ_EVENT_DISP_PWM0_SOF 400 +#define CMDQ_EVENT_DSI0_FRAME_DONE 410 +#define CMDQ_EVENT_DISP_WDMA0_FRAME_DONE 411 +#define CMDQ_EVENT_DISP_SPR0_FRAME_DONE 412 +#define CMDQ_EVENT_DISP_RSZ0_FRAME_DONE 413 +#define CMDQ_EVENT_DISP_RDMA0_FRAME_DONE 414 +#define CMDQ_EVENT_DISP_POSTMASK0_FRAME_DONE 415 +#define CMDQ_EVENT_DISP_OVL0_FRAME_DONE 416 +#define CMDQ_EVENT_DISP_OVL0_2L_FRAME_DONE 417 +#define CMDQ_EVENT_DISP_GAMMA0_FRAME_DONE 418 +#define CMDQ_EVENT_DISP_DSC_WRAP0_CORE0_FRAME_DONE 420 +#define CMDQ_EVENT_DISP_DITHER0_FRAME_DONE 421 +#define CMDQ_EVENT_DISP_COLOR0_FRAME_DONE 422 +#define CMDQ_EVENT_DISP_CM0_FRAME_DONE 423 +#define CMDQ_EVENT_DISP_CCORR1_FRAME_DONE 424 +#define CMDQ_EVENT_DISP_CCORR0_FRAME_DONE 425 +#define CMDQ_EVENT_DISP_AAL0_FRAME_DONE 426 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0 434 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1 435 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_2 436 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_3 437 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_4 438 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_5 439 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_6 440 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_7 441 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_8 442 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_9 443 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_10 444 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_11 445 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_12 446 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_13 447 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_14 448 +#define CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_15 449 +#define CMDQ_EVENT_DSI0_TE_ENG_EVENT 450 +#define CMDQ_EVENT_DSI0_IRQ_ENG_EVENT 451 +#define CMDQ_EVENT_DSI0_DONE_ENG_EVENT 452 +#define CMDQ_EVENT_DISP_WDMA0_SW_RST_DONE_ENG_EVENT 453 +#define CMDQ_EVENT_DISP_SMIASSERT_ENG_EVENT 454 +#define CMDQ_EVENT_DISP_POSTMASK0_RST_DONE_ENG_EVENT 455 +#define CMDQ_EVENT_DISP_OVL0_RST_DONE_ENG_EVENT 456 +#define CMDQ_EVENT_DISP_OVL0_2L_RST_DONE_ENG_EVENT 457 +#define CMDQ_EVENT_BUF_UNDERRUN_ENG_EVENT_0 458 +#define CMDQ_EVENT_BUF_UNDERRUN_ENG_EVENT_1 459 +#define CMDQ_EVENT_BUF_UNDERRUN_ENG_EVENT_2 460 +#define CMDQ_EVENT_BUF_UNDERRUN_ENG_EVENT_3 461 +#define CMDQ_EVENT_BUF_UNDERRUN_ENG_EVENT_4 462 +#define CMDQ_EVENT_BUF_UNDERRUN_ENG_EVENT_5 463 +#define CMDQ_EVENT_BUF_UNDERRUN_ENG_EVENT_6 464 +#define CMDQ_EVENT_BUF_UNDERRUN_ENG_EVENT_7 465 +#define CMDQ_EVENT_OUT_EVENT_0 898 + +/* CMDQ sw tokens + * Following definitions are gce sw token which may use by clients + * event operation API. + * Note that token 512 to 639 may set secure + */ + +/* end of hw event and begin of sw token */ +#define CMDQ_MAX_HW_EVENT 512 + +/* Config thread notify trigger thread */ +#define CMDQ_SYNC_TOKEN_CONFIG_DIRTY 640 +/* Trigger thread notify config thread */ +#define CMDQ_SYNC_TOKEN_STREAM_EOF 641 +/* Block Trigger thread until the ESD check finishes. */ +#define CMDQ_SYNC_TOKEN_ESD_EOF 642 +#define CMDQ_SYNC_TOKEN_STREAM_BLOCK 643 +/* check CABC setup finish */ +#define CMDQ_SYNC_TOKEN_CABC_EOF 644 + +/* Notify normal CMDQ there are some secure task done + * MUST NOT CHANGE, this token sync with secure world + */ +#define CMDQ_SYNC_SECURE_THR_EOF 647 + +/* CMDQ use sw token */ +#define CMDQ_SYNC_TOKEN_USER_0 649 +#define CMDQ_SYNC_TOKEN_USER_1 650 +#define CMDQ_SYNC_TOKEN_POLL_MONITOR 651 +#define CMDQ_SYNC_TOKEN_TPR_LOCK 652 + +/* ISP sw token */ +#define CMDQ_SYNC_TOKEN_MSS 665 +#define CMDQ_SYNC_TOKEN_MSF 666 + +/* DISP sw token */ +#define CMDQ_SYNC_TOKEN_SODI 671 + +/* GPR access tokens (for register backup) + * There are 15 32-bit GPR, 3 GPR form a set + * (64-bit for address, 32-bit for value) + * MUST NOT CHANGE, these tokens sync with MDP + */ +#define CMDQ_SYNC_TOKEN_GPR_SET_0 700 +#define CMDQ_SYNC_TOKEN_GPR_SET_1 701 +#define CMDQ_SYNC_TOKEN_GPR_SET_2 702 +#define CMDQ_SYNC_TOKEN_GPR_SET_3 703 +#define CMDQ_SYNC_TOKEN_GPR_SET_4 704 + +/* Resource lock event to control resource in GCE thread */ +#define CMDQ_SYNC_RESOURCE_WROT0 710 +#define CMDQ_SYNC_RESOURCE_WROT1 711 + +/* event for gpr timer, used in sleep and poll with timeout */ +#define CMDQ_TOKEN_GPR_TIMER_R0 994 +#define CMDQ_TOKEN_GPR_TIMER_R1 995 +#define CMDQ_TOKEN_GPR_TIMER_R2 996 +#define CMDQ_TOKEN_GPR_TIMER_R3 997 +#define CMDQ_TOKEN_GPR_TIMER_R4 998 +#define CMDQ_TOKEN_GPR_TIMER_R5 999 +#define CMDQ_TOKEN_GPR_TIMER_R6 1000 +#define CMDQ_TOKEN_GPR_TIMER_R7 1001 +#define CMDQ_TOKEN_GPR_TIMER_R8 1002 +#define CMDQ_TOKEN_GPR_TIMER_R9 1003 +#define CMDQ_TOKEN_GPR_TIMER_R10 1004 +#define CMDQ_TOKEN_GPR_TIMER_R11 1005 +#define CMDQ_TOKEN_GPR_TIMER_R12 1006 +#define CMDQ_TOKEN_GPR_TIMER_R13 1007 +#define CMDQ_TOKEN_GPR_TIMER_R14 1008 +#define CMDQ_TOKEN_GPR_TIMER_R15 1009 + +#define CMDQ_EVENT_MAX 0x3FF +/* CMDQ sw tokens END */ + +#endif diff --git a/dts/include/dt-bindings/interconnect/qcom,sc8180x.h b/dts/include/dt-bindings/interconnect/qcom,sc8180x.h index 235b525d28..e84cfec5af 100644 --- a/dts/include/dt-bindings/interconnect/qcom,sc8180x.h +++ b/dts/include/dt-bindings/interconnect/qcom,sc8180x.h @@ -182,4 +182,11 @@ #define SLAVE_MNOC_SF_MEM_NOC_DISPLAY 3 #define SLAVE_MNOC_HF_MEM_NOC_DISPLAY 4 +#define MASTER_QUP_CORE_0 0 +#define MASTER_QUP_CORE_1 1 +#define MASTER_QUP_CORE_2 2 +#define SLAVE_QUP_CORE_0 3 +#define SLAVE_QUP_CORE_1 4 +#define SLAVE_QUP_CORE_2 5 + #endif diff --git a/dts/include/dt-bindings/interconnect/qcom,sc8280xp.h b/dts/include/dt-bindings/interconnect/qcom,sc8280xp.h new file mode 100644 index 0000000000..a3e5fda7c1 --- /dev/null +++ b/dts/include/dt-bindings/interconnect/qcom,sc8280xp.h @@ -0,0 +1,232 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Ltd. + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SC8280XP_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_SC8280XP_H + +/* aggre1_noc */ +#define MASTER_QSPI_0 0 +#define MASTER_QUP_1 1 +#define MASTER_QUP_2 2 +#define MASTER_A1NOC_CFG 3 +#define MASTER_IPA 4 +#define MASTER_EMAC_1 5 +#define MASTER_SDCC_4 6 +#define MASTER_UFS_MEM 7 +#define MASTER_USB3_0 8 +#define MASTER_USB3_1 9 +#define MASTER_USB3_MP 10 +#define MASTER_USB4_0 11 +#define MASTER_USB4_1 12 +#define SLAVE_A1NOC_SNOC 13 +#define SLAVE_USB_NOC_SNOC 14 +#define SLAVE_SERVICE_A1NOC 15 + +/* aggre2_noc */ +#define MASTER_QDSS_BAM 0 +#define MASTER_QUP_0 1 +#define MASTER_A2NOC_CFG 2 +#define MASTER_CRYPTO 3 +#define MASTER_SENSORS_PROC 4 +#define MASTER_SP 5 +#define MASTER_EMAC 6 +#define MASTER_PCIE_0 7 +#define MASTER_PCIE_1 8 +#define MASTER_PCIE_2A 9 +#define MASTER_PCIE_2B 10 +#define MASTER_PCIE_3A 11 +#define MASTER_PCIE_3B 12 +#define MASTER_PCIE_4 13 +#define MASTER_QDSS_ETR 14 +#define MASTER_SDCC_2 15 +#define MASTER_UFS_CARD 16 +#define SLAVE_A2NOC_SNOC 17 +#define SLAVE_ANOC_PCIE_GEM_NOC 18 +#define SLAVE_SERVICE_A2NOC 19 + +/* clk_virt */ +#define MASTER_IPA_CORE 0 +#define MASTER_QUP_CORE_0 1 +#define MASTER_QUP_CORE_1 2 +#define MASTER_QUP_CORE_2 3 +#define SLAVE_IPA_CORE 4 +#define SLAVE_QUP_CORE_0 5 +#define SLAVE_QUP_CORE_1 6 +#define SLAVE_QUP_CORE_2 7 + +/* config_noc */ +#define MASTER_GEM_NOC_CNOC 0 +#define MASTER_GEM_NOC_PCIE_SNOC 1 +#define SLAVE_AHB2PHY_0 2 +#define SLAVE_AHB2PHY_1 3 +#define SLAVE_AHB2PHY_2 4 +#define SLAVE_AOSS 5 +#define SLAVE_APPSS 6 +#define SLAVE_CAMERA_CFG 7 +#define SLAVE_CLK_CTL 8 +#define SLAVE_CDSP_CFG 9 +#define SLAVE_CDSP1_CFG 10 +#define SLAVE_RBCPR_CX_CFG 11 +#define SLAVE_RBCPR_MMCX_CFG 12 +#define SLAVE_RBCPR_MX_CFG 13 +#define SLAVE_CPR_NSPCX 14 +#define SLAVE_CRYPTO_0_CFG 15 +#define SLAVE_CX_RDPM 16 +#define SLAVE_DCC_CFG 17 +#define SLAVE_DISPLAY_CFG 18 +#define SLAVE_DISPLAY1_CFG 19 +#define SLAVE_EMAC_CFG 20 +#define SLAVE_EMAC1_CFG 21 +#define SLAVE_GFX3D_CFG 22 +#define SLAVE_HWKM 23 +#define SLAVE_IMEM_CFG 24 +#define SLAVE_IPA_CFG 25 +#define SLAVE_IPC_ROUTER_CFG 26 +#define SLAVE_LPASS 27 +#define SLAVE_MX_RDPM 28 +#define SLAVE_MXC_RDPM 29 +#define SLAVE_PCIE_0_CFG 30 +#define SLAVE_PCIE_1_CFG 31 +#define SLAVE_PCIE_2A_CFG 32 +#define SLAVE_PCIE_2B_CFG 33 +#define SLAVE_PCIE_3A_CFG 34 +#define SLAVE_PCIE_3B_CFG 35 +#define SLAVE_PCIE_4_CFG 36 +#define SLAVE_PCIE_RSC_CFG 37 +#define SLAVE_PDM 38 +#define SLAVE_PIMEM_CFG 39 +#define SLAVE_PKA_WRAPPER_CFG 40 +#define SLAVE_PMU_WRAPPER_CFG 41 +#define SLAVE_QDSS_CFG 42 +#define SLAVE_QSPI_0 43 +#define SLAVE_QUP_0 44 +#define SLAVE_QUP_1 45 +#define SLAVE_QUP_2 46 +#define SLAVE_SDCC_2 47 +#define SLAVE_SDCC_4 48 +#define SLAVE_SECURITY 49 +#define SLAVE_SMMUV3_CFG 50 +#define SLAVE_SMSS_CFG 51 +#define SLAVE_SPSS_CFG 52 +#define SLAVE_TCSR 53 +#define SLAVE_TLMM 54 +#define SLAVE_UFS_CARD_CFG 55 +#define SLAVE_UFS_MEM_CFG 56 +#define SLAVE_USB3_0 57 +#define SLAVE_USB3_1 58 +#define SLAVE_USB3_MP 59 +#define SLAVE_USB4_0 60 +#define SLAVE_USB4_1 61 +#define SLAVE_VENUS_CFG 62 +#define SLAVE_VSENSE_CTRL_CFG 63 +#define SLAVE_VSENSE_CTRL_R_CFG 64 +#define SLAVE_A1NOC_CFG 65 +#define SLAVE_A2NOC_CFG 66 +#define SLAVE_ANOC_PCIE_BRIDGE_CFG 67 +#define SLAVE_DDRSS_CFG 68 +#define SLAVE_CNOC_MNOC_CFG 69 +#define SLAVE_SNOC_CFG 70 +#define SLAVE_SNOC_SF_BRIDGE_CFG 71 +#define SLAVE_IMEM 72 +#define SLAVE_PIMEM 73 +#define SLAVE_SERVICE_CNOC 74 +#define SLAVE_PCIE_0 75 +#define SLAVE_PCIE_1 76 +#define SLAVE_PCIE_2A 77 +#define SLAVE_PCIE_2B 78 +#define SLAVE_PCIE_3A 79 +#define SLAVE_PCIE_3B 80 +#define SLAVE_PCIE_4 81 +#define SLAVE_QDSS_STM 82 +#define SLAVE_SMSS 83 +#define SLAVE_TCU 84 + +/* dc_noc */ +#define MASTER_CNOC_DC_NOC 0 +#define SLAVE_LLCC_CFG 1 +#define SLAVE_GEM_NOC_CFG 2 + +/* gem_noc */ +#define MASTER_GPU_TCU 0 +#define MASTER_PCIE_TCU 1 +#define MASTER_SYS_TCU 2 +#define MASTER_APPSS_PROC 3 +#define MASTER_COMPUTE_NOC 4 +#define MASTER_COMPUTE_NOC_1 5 +#define MASTER_GEM_NOC_CFG 6 +#define MASTER_GFX3D 7 +#define MASTER_MNOC_HF_MEM_NOC 8 +#define MASTER_MNOC_SF_MEM_NOC 9 +#define MASTER_ANOC_PCIE_GEM_NOC 10 +#define MASTER_SNOC_GC_MEM_NOC 11 +#define MASTER_SNOC_SF_MEM_NOC 12 +#define SLAVE_GEM_NOC_CNOC 13 +#define SLAVE_LLCC 14 +#define SLAVE_GEM_NOC_PCIE_CNOC 15 +#define SLAVE_SERVICE_GEM_NOC_1 16 +#define SLAVE_SERVICE_GEM_NOC_2 17 +#define SLAVE_SERVICE_GEM_NOC 18 + +/* lpass_ag_noc */ +#define MASTER_CNOC_LPASS_AG_NOC 0 +#define MASTER_LPASS_PROC 1 +#define SLAVE_LPASS_CORE_CFG 2 +#define SLAVE_LPASS_LPI_CFG 3 +#define SLAVE_LPASS_MPU_CFG 4 +#define SLAVE_LPASS_TOP_CFG 5 +#define SLAVE_LPASS_SNOC 6 +#define SLAVE_SERVICES_LPASS_AML_NOC 7 +#define SLAVE_SERVICE_LPASS_AG_NOC 8 + +/* mc_virt */ +#define MASTER_LLCC 0 +#define SLAVE_EBI1 1 + +/*mmss_noc */ +#define MASTER_CAMNOC_HF 0 +#define MASTER_MDP0 1 +#define MASTER_MDP1 2 +#define MASTER_MDP_CORE1_0 3 +#define MASTER_MDP_CORE1_1 4 +#define MASTER_CNOC_MNOC_CFG 5 +#define MASTER_ROTATOR 6 +#define MASTER_ROTATOR_1 7 +#define MASTER_VIDEO_P0 8 +#define MASTER_VIDEO_P1 9 +#define MASTER_VIDEO_PROC 10 +#define MASTER_CAMNOC_ICP 11 +#define MASTER_CAMNOC_SF 12 +#define SLAVE_MNOC_HF_MEM_NOC 13 +#define SLAVE_MNOC_SF_MEM_NOC 14 +#define SLAVE_SERVICE_MNOC 15 + +/* nspa_noc */ +#define MASTER_CDSP_NOC_CFG 0 +#define MASTER_CDSP_PROC 1 +#define SLAVE_CDSP_MEM_NOC 2 +#define SLAVE_NSP_XFR 3 +#define SLAVE_SERVICE_NSP_NOC 4 + +/* nspb_noc */ +#define MASTER_CDSPB_NOC_CFG 0 +#define MASTER_CDSP_PROC_B 1 +#define SLAVE_CDSPB_MEM_NOC 2 +#define SLAVE_NSPB_XFR 3 +#define SLAVE_SERVICE_NSPB_NOC 4 + +/* system_noc */ +#define MASTER_A1NOC_SNOC 0 +#define MASTER_A2NOC_SNOC 1 +#define MASTER_USB_NOC_SNOC 2 +#define MASTER_LPASS_ANOC 3 +#define MASTER_SNOC_CFG 4 +#define MASTER_PIMEM 5 +#define MASTER_GIC 6 +#define SLAVE_SNOC_GEM_NOC_GC 7 +#define SLAVE_SNOC_GEM_NOC_SF 8 +#define SLAVE_SERVICE_SNOC 9 + +#endif diff --git a/dts/include/dt-bindings/interconnect/qcom,sdx65.h b/dts/include/dt-bindings/interconnect/qcom,sdx65.h new file mode 100644 index 0000000000..b25288aa7d --- /dev/null +++ b/dts/include/dt-bindings/interconnect/qcom,sdx65.h @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */ +/* + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SDX65_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_SDX65_H + +#define MASTER_LLCC 0 +#define SLAVE_EBI1 1 + +#define MASTER_TCU_0 0 +#define MASTER_SNOC_GC_MEM_NOC 1 +#define MASTER_APPSS_PROC 2 +#define SLAVE_LLCC 3 +#define SLAVE_MEM_NOC_SNOC 4 +#define SLAVE_MEM_NOC_PCIE_SNOC 5 + +#define MASTER_AUDIO 0 +#define MASTER_BLSP_1 1 +#define MASTER_QDSS_BAM 2 +#define MASTER_QPIC 3 +#define MASTER_SNOC_CFG 4 +#define MASTER_SPMI_FETCHER 5 +#define MASTER_ANOC_SNOC 6 +#define MASTER_IPA 7 +#define MASTER_MEM_NOC_SNOC 8 +#define MASTER_MEM_NOC_PCIE_SNOC 9 +#define MASTER_CRYPTO 10 +#define MASTER_IPA_PCIE 11 +#define MASTER_PCIE_0 12 +#define MASTER_QDSS_ETR 13 +#define MASTER_SDCC_1 14 +#define MASTER_USB3 15 +#define SLAVE_AOSS 16 +#define SLAVE_APPSS 17 +#define SLAVE_AUDIO 18 +#define SLAVE_BLSP_1 19 +#define SLAVE_CLK_CTL 20 +#define SLAVE_CRYPTO_0_CFG 21 +#define SLAVE_CNOC_DDRSS 22 +#define SLAVE_ECC_CFG 23 +#define SLAVE_IMEM_CFG 24 +#define SLAVE_IPA_CFG 25 +#define SLAVE_CNOC_MSS 26 +#define SLAVE_PCIE_PARF 27 +#define SLAVE_PDM 28 +#define SLAVE_PRNG 29 +#define SLAVE_QDSS_CFG 30 +#define SLAVE_QPIC 31 +#define SLAVE_SDCC_1 32 +#define SLAVE_SNOC_CFG 33 +#define SLAVE_SPMI_FETCHER 34 +#define SLAVE_SPMI_VGI_COEX 35 +#define SLAVE_TCSR 36 +#define SLAVE_TLMM 37 +#define SLAVE_USB3 38 +#define SLAVE_USB3_PHY_CFG 39 +#define SLAVE_ANOC_SNOC 40 +#define SLAVE_SNOC_MEM_NOC_GC 41 +#define SLAVE_IMEM 42 +#define SLAVE_SERVICE_SNOC 43 +#define SLAVE_PCIE_0 44 +#define SLAVE_QDSS_STM 45 +#define SLAVE_TCU 46 + +#endif diff --git a/dts/include/dt-bindings/mailbox/tegra186-hsp.h b/dts/include/dt-bindings/mailbox/tegra186-hsp.h index 3bdec7a84d..b9ccae2aa9 100644 --- a/dts/include/dt-bindings/mailbox/tegra186-hsp.h +++ b/dts/include/dt-bindings/mailbox/tegra186-hsp.h @@ -15,6 +15,11 @@ #define TEGRA_HSP_MBOX_TYPE_SS 0x2 #define TEGRA_HSP_MBOX_TYPE_AS 0x3 +/* + * These define the types of shared mailbox supported based on data size. + */ +#define TEGRA_HSP_MBOX_TYPE_SM_128BIT (1 << 8) + /* * These defines represent the bit associated with the given master ID in the * doorbell registers. diff --git a/dts/include/dt-bindings/memory/mt8186-memory-port.h b/dts/include/dt-bindings/memory/mt8186-memory-port.h new file mode 100644 index 0000000000..2bc6e44330 --- /dev/null +++ b/dts/include/dt-bindings/memory/mt8186-memory-port.h @@ -0,0 +1,217 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2022 MediaTek Inc. + * + * Author: Anan Sun + * Author: Yong Wu + */ +#ifndef _DT_BINDINGS_MEMORY_MT8186_LARB_PORT_H_ +#define _DT_BINDINGS_MEMORY_MT8186_LARB_PORT_H_ + +#include + +/* + * MM IOMMU supports 16GB dma address. We separate it to four ranges: + * 0 ~ 4G; 4G ~ 8G; 8G ~ 12G; 12G ~ 16G, we could adjust these masters + * locate in anyone region. BUT: + * a) Make sure all the ports inside a larb are in one range. + * b) The iova of any master can NOT cross the 4G/8G/12G boundary. + * + * This is the suggested mapping in this SoC: + * + * modules dma-address-region larbs-ports + * disp 0 ~ 4G larb0/1/2 + * vcodec 4G ~ 8G larb4/7 + * cam/mdp 8G ~ 12G the other larbs. + * N/A 12G ~ 16G + * CCU0 0x24000_0000 ~ 0x243ff_ffff larb13: port 9/10 + * CCU1 0x24400_0000 ~ 0x247ff_ffff larb14: port 4/5 + */ + +/* MM IOMMU ports */ +/* LARB 0 -- MMSYS */ +#define IOMMU_PORT_L0_DISP_POSTMASK0 MTK_M4U_ID(0, 0) +#define IOMMU_PORT_L0_REVERSED MTK_M4U_ID(0, 1) +#define IOMMU_PORT_L0_OVL_RDMA0 MTK_M4U_ID(0, 2) +#define IOMMU_PORT_L0_DISP_FAKE0 MTK_M4U_ID(0, 3) + +/* LARB 1 -- MMSYS */ +#define IOMMU_PORT_L1_DISP_RDMA1 MTK_M4U_ID(1, 0) +#define IOMMU_PORT_L1_OVL_2L_RDMA0 MTK_M4U_ID(1, 1) +#define IOMMU_PORT_L1_DISP_RDMA0 MTK_M4U_ID(1, 2) +#define IOMMU_PORT_L1_DISP_WDMA0 MTK_M4U_ID(1, 3) +#define IOMMU_PORT_L1_DISP_FAKE1 MTK_M4U_ID(1, 4) + +/* LARB 2 -- MMSYS */ +#define IOMMU_PORT_L2_MDP_RDMA0 MTK_M4U_ID(2, 0) +#define IOMMU_PORT_L2_MDP_RDMA1 MTK_M4U_ID(2, 1) +#define IOMMU_PORT_L2_MDP_WROT0 MTK_M4U_ID(2, 2) +#define IOMMU_PORT_L2_MDP_WROT1 MTK_M4U_ID(2, 3) +#define IOMMU_PORT_L2_DISP_FAKE0 MTK_M4U_ID(2, 4) + +/* LARB 4 -- VDEC */ +#define IOMMU_PORT_L4_HW_VDEC_MC_EXT MTK_M4U_ID(4, 0) +#define IOMMU_PORT_L4_HW_VDEC_UFO_EXT MTK_M4U_ID(4, 1) +#define IOMMU_PORT_L4_HW_VDEC_PP_EXT MTK_M4U_ID(4, 2) +#define IOMMU_PORT_L4_HW_VDEC_PRED_RD_EXT MTK_M4U_ID(4, 3) +#define IOMMU_PORT_L4_HW_VDEC_PRED_WR_EXT MTK_M4U_ID(4, 4) +#define IOMMU_PORT_L4_HW_VDEC_PPWRAP_EXT MTK_M4U_ID(4, 5) +#define IOMMU_PORT_L4_HW_VDEC_TILE_EXT MTK_M4U_ID(4, 6) +#define IOMMU_PORT_L4_HW_VDEC_VLD_EXT MTK_M4U_ID(4, 7) +#define IOMMU_PORT_L4_HW_VDEC_VLD2_EXT MTK_M4U_ID(4, 8) +#define IOMMU_PORT_L4_HW_VDEC_AVC_MV_EXT MTK_M4U_ID(4, 9) +#define IOMMU_PORT_L4_HW_VDEC_UFO_ENC_EXT MTK_M4U_ID(4, 10) +#define IOMMU_PORT_L4_HW_VDEC_RG_CTRL_DMA_EXT MTK_M4U_ID(4, 11) +#define IOMMU_PORT_L4_HW_MINI_MDP_R0_EXT MTK_M4U_ID(4, 12) +#define IOMMU_PORT_L4_HW_MINI_MDP_W0_EXT MTK_M4U_ID(4, 13) + +/* LARB 7 -- VENC */ +#define IOMMU_PORT_L7_VENC_RCPU MTK_M4U_ID(7, 0) +#define IOMMU_PORT_L7_VENC_REC MTK_M4U_ID(7, 1) +#define IOMMU_PORT_L7_VENC_BSDMA MTK_M4U_ID(7, 2) +#define IOMMU_PORT_L7_VENC_SV_COMV MTK_M4U_ID(7, 3) +#define IOMMU_PORT_L7_VENC_RD_COMV MTK_M4U_ID(7, 4) +#define IOMMU_PORT_L7_VENC_CUR_LUMA MTK_M4U_ID(7, 5) +#define IOMMU_PORT_L7_VENC_CUR_CHROMA MTK_M4U_ID(7, 6) +#define IOMMU_PORT_L7_VENC_REF_LUMA MTK_M4U_ID(7, 7) +#define IOMMU_PORT_L7_VENC_REF_CHROMA MTK_M4U_ID(7, 8) +#define IOMMU_PORT_L7_JPGENC_Y_RDMA MTK_M4U_ID(7, 9) +#define IOMMU_PORT_L7_JPGENC_C_RDMA MTK_M4U_ID(7, 10) +#define IOMMU_PORT_L7_JPGENC_Q_TABLE MTK_M4U_ID(7, 11) +#define IOMMU_PORT_L7_JPGENC_BSDMA MTK_M4U_ID(7, 12) + +/* LARB 8 -- WPE */ +#define IOMMU_PORT_L8_WPE_RDMA_0 MTK_M4U_ID(8, 0) +#define IOMMU_PORT_L8_WPE_RDMA_1 MTK_M4U_ID(8, 1) +#define IOMMU_PORT_L8_WPE_WDMA_0 MTK_M4U_ID(8, 2) + +/* LARB 9 -- IMG-1 */ +#define IOMMU_PORT_L9_IMG_IMGI_D1 MTK_M4U_ID(9, 0) +#define IOMMU_PORT_L9_IMG_IMGBI_D1 MTK_M4U_ID(9, 1) +#define IOMMU_PORT_L9_IMG_DMGI_D1 MTK_M4U_ID(9, 2) +#define IOMMU_PORT_L9_IMG_DEPI_D1 MTK_M4U_ID(9, 3) +#define IOMMU_PORT_L9_IMG_LCE_D1 MTK_M4U_ID(9, 4) +#define IOMMU_PORT_L9_IMG_SMTI_D1 MTK_M4U_ID(9, 5) +#define IOMMU_PORT_L9_IMG_SMTO_D2 MTK_M4U_ID(9, 6) +#define IOMMU_PORT_L9_IMG_SMTO_D1 MTK_M4U_ID(9, 7) +#define IOMMU_PORT_L9_IMG_CRZO_D1 MTK_M4U_ID(9, 8) +#define IOMMU_PORT_L9_IMG_IMG3O_D1 MTK_M4U_ID(9, 9) +#define IOMMU_PORT_L9_IMG_VIPI_D1 MTK_M4U_ID(9, 10) +#define IOMMU_PORT_L9_IMG_SMTI_D5 MTK_M4U_ID(9, 11) +#define IOMMU_PORT_L9_IMG_TIMGO_D1 MTK_M4U_ID(9, 12) +#define IOMMU_PORT_L9_IMG_UFBC_W0 MTK_M4U_ID(9, 13) +#define IOMMU_PORT_L9_IMG_UFBC_R0 MTK_M4U_ID(9, 14) +#define IOMMU_PORT_L9_IMG_WPE_RDMA1 MTK_M4U_ID(9, 15) +#define IOMMU_PORT_L9_IMG_WPE_RDMA0 MTK_M4U_ID(9, 16) +#define IOMMU_PORT_L9_IMG_WPE_WDMA MTK_M4U_ID(9, 17) +#define IOMMU_PORT_L9_IMG_MFB_RDMA0 MTK_M4U_ID(9, 18) +#define IOMMU_PORT_L9_IMG_MFB_RDMA1 MTK_M4U_ID(9, 19) +#define IOMMU_PORT_L9_IMG_MFB_RDMA2 MTK_M4U_ID(9, 20) +#define IOMMU_PORT_L9_IMG_MFB_RDMA3 MTK_M4U_ID(9, 21) +#define IOMMU_PORT_L9_IMG_MFB_RDMA4 MTK_M4U_ID(9, 22) +#define IOMMU_PORT_L9_IMG_MFB_RDMA5 MTK_M4U_ID(9, 23) +#define IOMMU_PORT_L9_IMG_MFB_WDMA0 MTK_M4U_ID(9, 24) +#define IOMMU_PORT_L9_IMG_MFB_WDMA1 MTK_M4U_ID(9, 25) +#define IOMMU_PORT_L9_IMG_RESERVE6 MTK_M4U_ID(9, 26) +#define IOMMU_PORT_L9_IMG_RESERVE7 MTK_M4U_ID(9, 27) +#define IOMMU_PORT_L9_IMG_RESERVE8 MTK_M4U_ID(9, 28) + +/* LARB 11 -- IMG-2 */ +#define IOMMU_PORT_L11_IMG_IMGI_D1 MTK_M4U_ID(11, 0) +#define IOMMU_PORT_L11_IMG_IMGBI_D1 MTK_M4U_ID(11, 1) +#define IOMMU_PORT_L11_IMG_DMGI_D1 MTK_M4U_ID(11, 2) +#define IOMMU_PORT_L11_IMG_DEPI_D1 MTK_M4U_ID(11, 3) +#define IOMMU_PORT_L11_IMG_LCE_D1 MTK_M4U_ID(11, 4) +#define IOMMU_PORT_L11_IMG_SMTI_D1 MTK_M4U_ID(11, 5) +#define IOMMU_PORT_L11_IMG_SMTO_D2 MTK_M4U_ID(11, 6) +#define IOMMU_PORT_L11_IMG_SMTO_D1 MTK_M4U_ID(11, 7) +#define IOMMU_PORT_L11_IMG_CRZO_D1 MTK_M4U_ID(11, 8) +#define IOMMU_PORT_L11_IMG_IMG3O_D1 MTK_M4U_ID(11, 9) +#define IOMMU_PORT_L11_IMG_VIPI_D1 MTK_M4U_ID(11, 10) +#define IOMMU_PORT_L11_IMG_SMTI_D5 MTK_M4U_ID(11, 11) +#define IOMMU_PORT_L11_IMG_TIMGO_D1 MTK_M4U_ID(11, 12) +#define IOMMU_PORT_L11_IMG_UFBC_W0 MTK_M4U_ID(11, 13) +#define IOMMU_PORT_L11_IMG_UFBC_R0 MTK_M4U_ID(11, 14) +#define IOMMU_PORT_L11_IMG_WPE_RDMA1 MTK_M4U_ID(11, 15) +#define IOMMU_PORT_L11_IMG_WPE_RDMA0 MTK_M4U_ID(11, 16) +#define IOMMU_PORT_L11_IMG_WPE_WDMA MTK_M4U_ID(11, 17) +#define IOMMU_PORT_L11_IMG_MFB_RDMA0 MTK_M4U_ID(11, 18) +#define IOMMU_PORT_L11_IMG_MFB_RDMA1 MTK_M4U_ID(11, 19) +#define IOMMU_PORT_L11_IMG_MFB_RDMA2 MTK_M4U_ID(11, 20) +#define IOMMU_PORT_L11_IMG_MFB_RDMA3 MTK_M4U_ID(11, 21) +#define IOMMU_PORT_L11_IMG_MFB_RDMA4 MTK_M4U_ID(11, 22) +#define IOMMU_PORT_L11_IMG_MFB_RDMA5 MTK_M4U_ID(11, 23) +#define IOMMU_PORT_L11_IMG_MFB_WDMA0 MTK_M4U_ID(11, 24) +#define IOMMU_PORT_L11_IMG_MFB_WDMA1 MTK_M4U_ID(11, 25) +#define IOMMU_PORT_L11_IMG_RESERVE6 MTK_M4U_ID(11, 26) +#define IOMMU_PORT_L11_IMG_RESERVE7 MTK_M4U_ID(11, 27) +#define IOMMU_PORT_L11_IMG_RESERVE8 MTK_M4U_ID(11, 28) + +/* LARB 13 -- CAM */ +#define IOMMU_PORT_L13_CAM_MRAWI MTK_M4U_ID(13, 0) +#define IOMMU_PORT_L13_CAM_MRAWO_0 MTK_M4U_ID(13, 1) +#define IOMMU_PORT_L13_CAM_MRAWO_1 MTK_M4U_ID(13, 2) +#define IOMMU_PORT_L13_CAM_CAMSV_4 MTK_M4U_ID(13, 6) +#define IOMMU_PORT_L13_CAM_CAMSV_5 MTK_M4U_ID(13, 7) +#define IOMMU_PORT_L13_CAM_CAMSV_6 MTK_M4U_ID(13, 8) +#define IOMMU_PORT_L13_CAM_CCUI MTK_M4U_ID(13, 9) +#define IOMMU_PORT_L13_CAM_CCUO MTK_M4U_ID(13, 10) +#define IOMMU_PORT_L13_CAM_FAKE MTK_M4U_ID(13, 11) + +/* LARB 14 -- CAM */ +#define IOMMU_PORT_L14_CAM_CCUI MTK_M4U_ID(14, 4) +#define IOMMU_PORT_L14_CAM_CCUO MTK_M4U_ID(14, 5) + +/* LARB 16 -- RAW-A */ +#define IOMMU_PORT_L16_CAM_IMGO_R1_A MTK_M4U_ID(16, 0) +#define IOMMU_PORT_L16_CAM_RRZO_R1_A MTK_M4U_ID(16, 1) +#define IOMMU_PORT_L16_CAM_CQI_R1_A MTK_M4U_ID(16, 2) +#define IOMMU_PORT_L16_CAM_BPCI_R1_A MTK_M4U_ID(16, 3) +#define IOMMU_PORT_L16_CAM_YUVO_R1_A MTK_M4U_ID(16, 4) +#define IOMMU_PORT_L16_CAM_UFDI_R2_A MTK_M4U_ID(16, 5) +#define IOMMU_PORT_L16_CAM_RAWI_R2_A MTK_M4U_ID(16, 6) +#define IOMMU_PORT_L16_CAM_RAWI_R3_A MTK_M4U_ID(16, 7) +#define IOMMU_PORT_L16_CAM_AAO_R1_A MTK_M4U_ID(16, 8) +#define IOMMU_PORT_L16_CAM_AFO_R1_A MTK_M4U_ID(16, 9) +#define IOMMU_PORT_L16_CAM_FLKO_R1_A MTK_M4U_ID(16, 10) +#define IOMMU_PORT_L16_CAM_LCESO_R1_A MTK_M4U_ID(16, 11) +#define IOMMU_PORT_L16_CAM_CRZO_R1_A MTK_M4U_ID(16, 12) +#define IOMMU_PORT_L16_CAM_LTMSO_R1_A MTK_M4U_ID(16, 13) +#define IOMMU_PORT_L16_CAM_RSSO_R1_A MTK_M4U_ID(16, 14) +#define IOMMU_PORT_L16_CAM_AAHO_R1_A MTK_M4U_ID(16, 15) +#define IOMMU_PORT_L16_CAM_LSCI_R1_A MTK_M4U_ID(16, 16) + +/* LARB 17 -- RAW-B */ +#define IOMMU_PORT_L17_CAM_IMGO_R1_B MTK_M4U_ID(17, 0) +#define IOMMU_PORT_L17_CAM_RRZO_R1_B MTK_M4U_ID(17, 1) +#define IOMMU_PORT_L17_CAM_CQI_R1_B MTK_M4U_ID(17, 2) +#define IOMMU_PORT_L17_CAM_BPCI_R1_B MTK_M4U_ID(17, 3) +#define IOMMU_PORT_L17_CAM_YUVO_R1_B MTK_M4U_ID(17, 4) +#define IOMMU_PORT_L17_CAM_UFDI_R2_B MTK_M4U_ID(17, 5) +#define IOMMU_PORT_L17_CAM_RAWI_R2_B MTK_M4U_ID(17, 6) +#define IOMMU_PORT_L17_CAM_RAWI_R3_B MTK_M4U_ID(17, 7) +#define IOMMU_PORT_L17_CAM_AAO_R1_B MTK_M4U_ID(17, 8) +#define IOMMU_PORT_L17_CAM_AFO_R1_B MTK_M4U_ID(17, 9) +#define IOMMU_PORT_L17_CAM_FLKO_R1_B MTK_M4U_ID(17, 10) +#define IOMMU_PORT_L17_CAM_LCESO_R1_B MTK_M4U_ID(17, 11) +#define IOMMU_PORT_L17_CAM_CRZO_R1_B MTK_M4U_ID(17, 12) +#define IOMMU_PORT_L17_CAM_LTMSO_R1_B MTK_M4U_ID(17, 13) +#define IOMMU_PORT_L17_CAM_RSSO_R1_B MTK_M4U_ID(17, 14) +#define IOMMU_PORT_L17_CAM_AAHO_R1_B MTK_M4U_ID(17, 15) +#define IOMMU_PORT_L17_CAM_LSCI_R1_B MTK_M4U_ID(17, 16) + +/* LARB 19 -- IPE */ +#define IOMMU_PORT_L19_IPE_DVS_RDMA MTK_M4U_ID(19, 0) +#define IOMMU_PORT_L19_IPE_DVS_WDMA MTK_M4U_ID(19, 1) +#define IOMMU_PORT_L19_IPE_DVP_RDMA MTK_M4U_ID(19, 2) +#define IOMMU_PORT_L19_IPE_DVP_WDMA MTK_M4U_ID(19, 3) + +/* LARB 20 -- IPE */ +#define IOMMU_PORT_L20_IPE_FDVT_RDA MTK_M4U_ID(20, 0) +#define IOMMU_PORT_L20_IPE_FDVT_RDB MTK_M4U_ID(20, 1) +#define IOMMU_PORT_L20_IPE_FDVT_WRA MTK_M4U_ID(20, 2) +#define IOMMU_PORT_L20_IPE_FDVT_WRB MTK_M4U_ID(20, 3) +#define IOMMU_PORT_L20_IPE_RSC_RDMA0 MTK_M4U_ID(20, 4) +#define IOMMU_PORT_L20_IPE_RSC_WDMA MTK_M4U_ID(20, 5) + +#endif diff --git a/dts/include/dt-bindings/memory/mt8195-memory-port.h b/dts/include/dt-bindings/memory/mt8195-memory-port.h new file mode 100644 index 0000000000..70ba9f498e --- /dev/null +++ b/dts/include/dt-bindings/memory/mt8195-memory-port.h @@ -0,0 +1,408 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Yong Wu + */ +#ifndef _DT_BINDINGS_MEMORY_MT8195_LARB_PORT_H_ +#define _DT_BINDINGS_MEMORY_MT8195_LARB_PORT_H_ + +#include + +/* + * MM IOMMU supports 16GB dma address. We separate it to four ranges: + * 0 ~ 4G; 4G ~ 8G; 8G ~ 12G; 12G ~ 16G, we could adjust these masters + * locate in anyone region. BUT: + * a) Make sure all the ports inside a larb are in one range. + * b) The iova of any master can NOT cross the 4G/8G/12G boundary. + * + * This is the suggested mapping in this SoC: + * + * modules dma-address-region larbs-ports + * disp 0 ~ 4G larb0/1/2/3 + * vcodec 4G ~ 8G larb19/20/21/22/23/24 + * cam/mdp 8G ~ 12G the other larbs. + * N/A 12G ~ 16G + * CCU0 0x24000_0000 ~ 0x243ff_ffff larb18: port 0/1 + * CCU1 0x24400_0000 ~ 0x247ff_ffff larb18: port 2/3 + * + * This SoC have two IOMMU HWs, this is the detailed connected information: + * iommu-vdo: larb0/2/5/7/9/10/11/13/17/19/21/24/25/28 + * iommu-vpp: larb1/3/4/6/8/12/14/16/18/20/22/23/26/27 + */ + +/* MM IOMMU ports */ +/* larb0 */ +#define M4U_PORT_L0_DISP_RDMA0 MTK_M4U_ID(0, 0) +#define M4U_PORT_L0_DISP_WDMA0 MTK_M4U_ID(0, 1) +#define M4U_PORT_L0_DISP_OVL0_RDMA0 MTK_M4U_ID(0, 2) +#define M4U_PORT_L0_DISP_OVL0_RDMA1 MTK_M4U_ID(0, 3) +#define M4U_PORT_L0_DISP_OVL0_HDR MTK_M4U_ID(0, 4) +#define M4U_PORT_L0_DISP_FAKE0 MTK_M4U_ID(0, 5) + +/* larb1 */ +#define M4U_PORT_L1_DISP_RDMA0 MTK_M4U_ID(1, 0) +#define M4U_PORT_L1_DISP_WDMA0 MTK_M4U_ID(1, 1) +#define M4U_PORT_L1_DISP_OVL0_RDMA0 MTK_M4U_ID(1, 2) +#define M4U_PORT_L1_DISP_OVL0_RDMA1 MTK_M4U_ID(1, 3) +#define M4U_PORT_L1_DISP_OVL0_HDR MTK_M4U_ID(1, 4) +#define M4U_PORT_L1_DISP_FAKE0 MTK_M4U_ID(1, 5) + +/* larb2 */ +#define M4U_PORT_L2_MDP_RDMA0 MTK_M4U_ID(2, 0) +#define M4U_PORT_L2_MDP_RDMA2 MTK_M4U_ID(2, 1) +#define M4U_PORT_L2_MDP_RDMA4 MTK_M4U_ID(2, 2) +#define M4U_PORT_L2_MDP_RDMA6 MTK_M4U_ID(2, 3) +#define M4U_PORT_L2_DISP_FAKE1 MTK_M4U_ID(2, 4) + +/* larb3 */ +#define M4U_PORT_L3_MDP_RDMA1 MTK_M4U_ID(3, 0) +#define M4U_PORT_L3_MDP_RDMA3 MTK_M4U_ID(3, 1) +#define M4U_PORT_L3_MDP_RDMA5 MTK_M4U_ID(3, 2) +#define M4U_PORT_L3_MDP_RDMA7 MTK_M4U_ID(3, 3) +#define M4U_PORT_L3_HDR_DS MTK_M4U_ID(3, 4) +#define M4U_PORT_L3_HDR_ADL MTK_M4U_ID(3, 5) +#define M4U_PORT_L3_DISP_FAKE1 MTK_M4U_ID(3, 6) + +/* larb4 */ +#define M4U_PORT_L4_MDP_RDMA MTK_M4U_ID(4, 0) +#define M4U_PORT_L4_MDP_FG MTK_M4U_ID(4, 1) +#define M4U_PORT_L4_MDP_OVL MTK_M4U_ID(4, 2) +#define M4U_PORT_L4_MDP_WROT MTK_M4U_ID(4, 3) +#define M4U_PORT_L4_FAKE MTK_M4U_ID(4, 4) + +/* larb5 */ +#define M4U_PORT_L5_SVPP1_MDP_RDMA MTK_M4U_ID(5, 0) +#define M4U_PORT_L5_SVPP1_MDP_FG MTK_M4U_ID(5, 1) +#define M4U_PORT_L5_SVPP1_MDP_OVL MTK_M4U_ID(5, 2) +#define M4U_PORT_L5_SVPP1_MDP_WROT MTK_M4U_ID(5, 3) +#define M4U_PORT_L5_SVPP2_MDP_RDMA MTK_M4U_ID(5, 4) +#define M4U_PORT_L5_SVPP2_MDP_FG MTK_M4U_ID(5, 5) +#define M4U_PORT_L5_SVPP2_MDP_WROT MTK_M4U_ID(5, 6) +#define M4U_PORT_L5_FAKE MTK_M4U_ID(5, 7) + +/* larb6 */ +#define M4U_PORT_L6_SVPP3_MDP_RDMA MTK_M4U_ID(6, 0) +#define M4U_PORT_L6_SVPP3_MDP_FG MTK_M4U_ID(6, 1) +#define M4U_PORT_L6_SVPP3_MDP_WROT MTK_M4U_ID(6, 2) +#define M4U_PORT_L6_FAKE MTK_M4U_ID(6, 3) + +/* larb7 */ +#define M4U_PORT_L7_IMG_WPE_RDMA0 MTK_M4U_ID(7, 0) +#define M4U_PORT_L7_IMG_WPE_RDMA1 MTK_M4U_ID(7, 1) +#define M4U_PORT_L7_IMG_WPE_WDMA0 MTK_M4U_ID(7, 2) + +/* larb8 */ +#define M4U_PORT_L8_IMG_WPE_RDMA0 MTK_M4U_ID(8, 0) +#define M4U_PORT_L8_IMG_WPE_RDMA1 MTK_M4U_ID(8, 1) +#define M4U_PORT_L8_IMG_WPE_WDMA0 MTK_M4U_ID(8, 2) + +/* larb9 */ +#define M4U_PORT_L9_IMG_IMGI_T1_A MTK_M4U_ID(9, 0) +#define M4U_PORT_L9_IMG_IMGBI_T1_A MTK_M4U_ID(9, 1) +#define M4U_PORT_L9_IMG_IMGCI_T1_A MTK_M4U_ID(9, 2) +#define M4U_PORT_L9_IMG_SMTI_T1_A MTK_M4U_ID(9, 3) +#define M4U_PORT_L9_IMG_TNCSTI_T1_A MTK_M4U_ID(9, 4) +#define M4U_PORT_L9_IMG_TNCSTI_T4_A MTK_M4U_ID(9, 5) +#define M4U_PORT_L9_IMG_YUVO_T1_A MTK_M4U_ID(9, 6) +#define M4U_PORT_L9_IMG_TIMGO_T1_A MTK_M4U_ID(9, 7) +#define M4U_PORT_L9_IMG_YUVO_T2_A MTK_M4U_ID(9, 8) +#define M4U_PORT_L9_IMG_IMGI_T1_B MTK_M4U_ID(9, 9) +#define M4U_PORT_L9_IMG_IMGBI_T1_B MTK_M4U_ID(9, 10) +#define M4U_PORT_L9_IMG_IMGCI_T1_B MTK_M4U_ID(9, 11) +#define M4U_PORT_L9_IMG_YUVO_T5_A MTK_M4U_ID(9, 12) +#define M4U_PORT_L9_IMG_SMTI_T1_B MTK_M4U_ID(9, 13) +#define M4U_PORT_L9_IMG_TNCSO_T1_A MTK_M4U_ID(9, 14) +#define M4U_PORT_L9_IMG_SMTO_T1_A MTK_M4U_ID(9, 15) +#define M4U_PORT_L9_IMG_TNCSTO_T1_A MTK_M4U_ID(9, 16) +#define M4U_PORT_L9_IMG_YUVO_T2_B MTK_M4U_ID(9, 17) +#define M4U_PORT_L9_IMG_YUVO_T5_B MTK_M4U_ID(9, 18) +#define M4U_PORT_L9_IMG_SMTO_T1_B MTK_M4U_ID(9, 19) + +/* larb10 */ +#define M4U_PORT_L10_IMG_IMGI_D1_A MTK_M4U_ID(10, 0) +#define M4U_PORT_L10_IMG_IMGCI_D1_A MTK_M4U_ID(10, 1) +#define M4U_PORT_L10_IMG_DEPI_D1_A MTK_M4U_ID(10, 2) +#define M4U_PORT_L10_IMG_DMGI_D1_A MTK_M4U_ID(10, 3) +#define M4U_PORT_L10_IMG_VIPI_D1_A MTK_M4U_ID(10, 4) +#define M4U_PORT_L10_IMG_TNRWI_D1_A MTK_M4U_ID(10, 5) +#define M4U_PORT_L10_IMG_RECI_D1_A MTK_M4U_ID(10, 6) +#define M4U_PORT_L10_IMG_SMTI_D1_A MTK_M4U_ID(10, 7) +#define M4U_PORT_L10_IMG_SMTI_D6_A MTK_M4U_ID(10, 8) +#define M4U_PORT_L10_IMG_PIMGI_P1_A MTK_M4U_ID(10, 9) +#define M4U_PORT_L10_IMG_PIMGBI_P1_A MTK_M4U_ID(10, 10) +#define M4U_PORT_L10_IMG_PIMGCI_P1_A MTK_M4U_ID(10, 11) +#define M4U_PORT_L10_IMG_PIMGI_P1_B MTK_M4U_ID(10, 12) +#define M4U_PORT_L10_IMG_PIMGBI_P1_B MTK_M4U_ID(10, 13) +#define M4U_PORT_L10_IMG_PIMGCI_P1_B MTK_M4U_ID(10, 14) +#define M4U_PORT_L10_IMG_IMG3O_D1_A MTK_M4U_ID(10, 15) +#define M4U_PORT_L10_IMG_IMG4O_D1_A MTK_M4U_ID(10, 16) +#define M4U_PORT_L10_IMG_IMG3CO_D1_A MTK_M4U_ID(10, 17) +#define M4U_PORT_L10_IMG_FEO_D1_A MTK_M4U_ID(10, 18) +#define M4U_PORT_L10_IMG_IMG2O_D1_A MTK_M4U_ID(10, 19) +#define M4U_PORT_L10_IMG_TNRWO_D1_A MTK_M4U_ID(10, 20) +#define M4U_PORT_L10_IMG_SMTO_D1_A MTK_M4U_ID(10, 21) +#define M4U_PORT_L10_IMG_WROT_P1_A MTK_M4U_ID(10, 22) +#define M4U_PORT_L10_IMG_WROT_P1_B MTK_M4U_ID(10, 23) + +/* larb11 */ +#define M4U_PORT_L11_IMG_WPE_EIS_RDMA0_A MTK_M4U_ID(11, 0) +#define M4U_PORT_L11_IMG_WPE_EIS_RDMA1_A MTK_M4U_ID(11, 1) +#define M4U_PORT_L11_IMG_WPE_EIS_WDMA0_A MTK_M4U_ID(11, 2) +#define M4U_PORT_L11_IMG_WPE_TNR_RDMA0_A MTK_M4U_ID(11, 3) +#define M4U_PORT_L11_IMG_WPE_TNR_RDMA1_A MTK_M4U_ID(11, 4) +#define M4U_PORT_L11_IMG_WPE_TNR_WDMA0_A MTK_M4U_ID(11, 5) +#define M4U_PORT_L11_IMG_WPE_EIS_CQ0_A MTK_M4U_ID(11, 6) +#define M4U_PORT_L11_IMG_WPE_EIS_CQ1_A MTK_M4U_ID(11, 7) +#define M4U_PORT_L11_IMG_WPE_TNR_CQ0_A MTK_M4U_ID(11, 8) +#define M4U_PORT_L11_IMG_WPE_TNR_CQ1_A MTK_M4U_ID(11, 9) + +/* larb12 */ +#define M4U_PORT_L12_IMG_FDVT_RDA MTK_M4U_ID(12, 0) +#define M4U_PORT_L12_IMG_FDVT_RDB MTK_M4U_ID(12, 1) +#define M4U_PORT_L12_IMG_FDVT_WRA MTK_M4U_ID(12, 2) +#define M4U_PORT_L12_IMG_FDVT_WRB MTK_M4U_ID(12, 3) +#define M4U_PORT_L12_IMG_ME_RDMA MTK_M4U_ID(12, 4) +#define M4U_PORT_L12_IMG_ME_WDMA MTK_M4U_ID(12, 5) +#define M4U_PORT_L12_IMG_DVS_RDMA MTK_M4U_ID(12, 6) +#define M4U_PORT_L12_IMG_DVS_WDMA MTK_M4U_ID(12, 7) +#define M4U_PORT_L12_IMG_DVP_RDMA MTK_M4U_ID(12, 8) +#define M4U_PORT_L12_IMG_DVP_WDMA MTK_M4U_ID(12, 9) + +/* larb13 */ +#define M4U_PORT_L13_CAM_CAMSV_CQI_E1 MTK_M4U_ID(13, 0) +#define M4U_PORT_L13_CAM_CAMSV_CQI_E2 MTK_M4U_ID(13, 1) +#define M4U_PORT_L13_CAM_GCAMSV_A_IMGO_0 MTK_M4U_ID(13, 2) +#define M4U_PORT_L13_CAM_SCAMSV_A_IMGO_0 MTK_M4U_ID(13, 3) +#define M4U_PORT_L13_CAM_GCAMSV_B_IMGO_0 MTK_M4U_ID(13, 4) +#define M4U_PORT_L13_CAM_GCAMSV_B_IMGO_1 MTK_M4U_ID(13, 5) +#define M4U_PORT_L13_CAM_GCAMSV_A_UFEO_0 MTK_M4U_ID(13, 6) +#define M4U_PORT_L13_CAM_GCAMSV_B_UFEO_0 MTK_M4U_ID(13, 7) +#define M4U_PORT_L13_CAM_PDAI_0 MTK_M4U_ID(13, 8) +#define M4U_PORT_L13_CAM_FAKE MTK_M4U_ID(13, 9) + +/* larb14 */ +#define M4U_PORT_L14_CAM_GCAMSV_A_IMGO_1 MTK_M4U_ID(14, 0) +#define M4U_PORT_L14_CAM_SCAMSV_A_IMGO_1 MTK_M4U_ID(14, 1) +#define M4U_PORT_L14_CAM_GCAMSV_B_IMGO_0 MTK_M4U_ID(14, 2) +#define M4U_PORT_L14_CAM_GCAMSV_B_IMGO_1 MTK_M4U_ID(14, 3) +#define M4U_PORT_L14_CAM_SCAMSV_B_IMGO_0 MTK_M4U_ID(14, 4) +#define M4U_PORT_L14_CAM_SCAMSV_B_IMGO_1 MTK_M4U_ID(14, 5) +#define M4U_PORT_L14_CAM_IPUI MTK_M4U_ID(14, 6) +#define M4U_PORT_L14_CAM_IPU2I MTK_M4U_ID(14, 7) +#define M4U_PORT_L14_CAM_IPUO MTK_M4U_ID(14, 8) +#define M4U_PORT_L14_CAM_IPU2O MTK_M4U_ID(14, 9) +#define M4U_PORT_L14_CAM_IPU3O MTK_M4U_ID(14, 10) +#define M4U_PORT_L14_CAM_GCAMSV_A_UFEO_1 MTK_M4U_ID(14, 11) +#define M4U_PORT_L14_CAM_GCAMSV_B_UFEO_1 MTK_M4U_ID(14, 12) +#define M4U_PORT_L14_CAM_PDAI_1 MTK_M4U_ID(14, 13) +#define M4U_PORT_L14_CAM_PDAO MTK_M4U_ID(14, 14) + +/* larb15: null */ + +/* larb16 */ +#define M4U_PORT_L16_CAM_IMGO_R1 MTK_M4U_ID(16, 0) +#define M4U_PORT_L16_CAM_CQI_R1 MTK_M4U_ID(16, 1) +#define M4U_PORT_L16_CAM_CQI_R2 MTK_M4U_ID(16, 2) +#define M4U_PORT_L16_CAM_BPCI_R1 MTK_M4U_ID(16, 3) +#define M4U_PORT_L16_CAM_LSCI_R1 MTK_M4U_ID(16, 4) +#define M4U_PORT_L16_CAM_RAWI_R2 MTK_M4U_ID(16, 5) +#define M4U_PORT_L16_CAM_RAWI_R3 MTK_M4U_ID(16, 6) +#define M4U_PORT_L16_CAM_UFDI_R2 MTK_M4U_ID(16, 7) +#define M4U_PORT_L16_CAM_UFDI_R3 MTK_M4U_ID(16, 8) +#define M4U_PORT_L16_CAM_RAWI_R4 MTK_M4U_ID(16, 9) +#define M4U_PORT_L16_CAM_RAWI_R5 MTK_M4U_ID(16, 10) +#define M4U_PORT_L16_CAM_AAI_R1 MTK_M4U_ID(16, 11) +#define M4U_PORT_L16_CAM_FHO_R1 MTK_M4U_ID(16, 12) +#define M4U_PORT_L16_CAM_AAO_R1 MTK_M4U_ID(16, 13) +#define M4U_PORT_L16_CAM_TSFSO_R1 MTK_M4U_ID(16, 14) +#define M4U_PORT_L16_CAM_FLKO_R1 MTK_M4U_ID(16, 15) + +/* larb17 */ +#define M4U_PORT_L17_CAM_YUVO_R1 MTK_M4U_ID(17, 0) +#define M4U_PORT_L17_CAM_YUVO_R3 MTK_M4U_ID(17, 1) +#define M4U_PORT_L17_CAM_YUVCO_R1 MTK_M4U_ID(17, 2) +#define M4U_PORT_L17_CAM_YUVO_R2 MTK_M4U_ID(17, 3) +#define M4U_PORT_L17_CAM_RZH1N2TO_R1 MTK_M4U_ID(17, 4) +#define M4U_PORT_L17_CAM_DRZS4NO_R1 MTK_M4U_ID(17, 5) +#define M4U_PORT_L17_CAM_TNCSO_R1 MTK_M4U_ID(17, 6) + +/* larb18 */ +#define M4U_PORT_L18_CAM_CCUI MTK_M4U_ID(18, 0) +#define M4U_PORT_L18_CAM_CCUO MTK_M4U_ID(18, 1) +#define M4U_PORT_L18_CAM_CCUI2 MTK_M4U_ID(18, 2) +#define M4U_PORT_L18_CAM_CCUO2 MTK_M4U_ID(18, 3) + +/* larb19 */ +#define M4U_PORT_L19_VENC_RCPU MTK_M4U_ID(19, 0) +#define M4U_PORT_L19_VENC_REC MTK_M4U_ID(19, 1) +#define M4U_PORT_L19_VENC_BSDMA MTK_M4U_ID(19, 2) +#define M4U_PORT_L19_VENC_SV_COMV MTK_M4U_ID(19, 3) +#define M4U_PORT_L19_VENC_RD_COMV MTK_M4U_ID(19, 4) +#define M4U_PORT_L19_VENC_NBM_RDMA MTK_M4U_ID(19, 5) +#define M4U_PORT_L19_VENC_NBM_RDMA_LITE MTK_M4U_ID(19, 6) +#define M4U_PORT_L19_JPGENC_Y_RDMA MTK_M4U_ID(19, 7) +#define M4U_PORT_L19_JPGENC_C_RDMA MTK_M4U_ID(19, 8) +#define M4U_PORT_L19_JPGENC_Q_TABLE MTK_M4U_ID(19, 9) +#define M4U_PORT_L19_VENC_SUB_W_LUMA MTK_M4U_ID(19, 10) +#define M4U_PORT_L19_VENC_FCS_NBM_RDMA MTK_M4U_ID(19, 11) +#define M4U_PORT_L19_JPGENC_BSDMA MTK_M4U_ID(19, 12) +#define M4U_PORT_L19_JPGDEC_WDMA0 MTK_M4U_ID(19, 13) +#define M4U_PORT_L19_JPGDEC_BSDMA0 MTK_M4U_ID(19, 14) +#define M4U_PORT_L19_VENC_NBM_WDMA MTK_M4U_ID(19, 15) +#define M4U_PORT_L19_VENC_NBM_WDMA_LITE MTK_M4U_ID(19, 16) +#define M4U_PORT_L19_VENC_FCS_NBM_WDMA MTK_M4U_ID(19, 17) +#define M4U_PORT_L19_JPGDEC_WDMA1 MTK_M4U_ID(19, 18) +#define M4U_PORT_L19_JPGDEC_BSDMA1 MTK_M4U_ID(19, 19) +#define M4U_PORT_L19_JPGDEC_BUFF_OFFSET1 MTK_M4U_ID(19, 20) +#define M4U_PORT_L19_JPGDEC_BUFF_OFFSET0 MTK_M4U_ID(19, 21) +#define M4U_PORT_L19_VENC_CUR_LUMA MTK_M4U_ID(19, 22) +#define M4U_PORT_L19_VENC_CUR_CHROMA MTK_M4U_ID(19, 23) +#define M4U_PORT_L19_VENC_REF_LUMA MTK_M4U_ID(19, 24) +#define M4U_PORT_L19_VENC_REF_CHROMA MTK_M4U_ID(19, 25) +#define M4U_PORT_L19_VENC_SUB_R_CHROMA MTK_M4U_ID(19, 26) + +/* larb20 */ +#define M4U_PORT_L20_VENC_RCPU MTK_M4U_ID(20, 0) +#define M4U_PORT_L20_VENC_REC MTK_M4U_ID(20, 1) +#define M4U_PORT_L20_VENC_BSDMA MTK_M4U_ID(20, 2) +#define M4U_PORT_L20_VENC_SV_COMV MTK_M4U_ID(20, 3) +#define M4U_PORT_L20_VENC_RD_COMV MTK_M4U_ID(20, 4) +#define M4U_PORT_L20_VENC_NBM_RDMA MTK_M4U_ID(20, 5) +#define M4U_PORT_L20_VENC_NBM_RDMA_LITE MTK_M4U_ID(20, 6) +#define M4U_PORT_L20_JPGENC_Y_RDMA MTK_M4U_ID(20, 7) +#define M4U_PORT_L20_JPGENC_C_RDMA MTK_M4U_ID(20, 8) +#define M4U_PORT_L20_JPGENC_Q_TABLE MTK_M4U_ID(20, 9) +#define M4U_PORT_L20_VENC_SUB_W_LUMA MTK_M4U_ID(20, 10) +#define M4U_PORT_L20_VENC_FCS_NBM_RDMA MTK_M4U_ID(20, 11) +#define M4U_PORT_L20_JPGENC_BSDMA MTK_M4U_ID(20, 12) +#define M4U_PORT_L20_JPGDEC_WDMA0 MTK_M4U_ID(20, 13) +#define M4U_PORT_L20_JPGDEC_BSDMA0 MTK_M4U_ID(20, 14) +#define M4U_PORT_L20_VENC_NBM_WDMA MTK_M4U_ID(20, 15) +#define M4U_PORT_L20_VENC_NBM_WDMA_LITE MTK_M4U_ID(20, 16) +#define M4U_PORT_L20_VENC_FCS_NBM_WDMA MTK_M4U_ID(20, 17) +#define M4U_PORT_L20_JPGDEC_WDMA1 MTK_M4U_ID(20, 18) +#define M4U_PORT_L20_JPGDEC_BSDMA1 MTK_M4U_ID(20, 19) +#define M4U_PORT_L20_JPGDEC_BUFF_OFFSET1 MTK_M4U_ID(20, 20) +#define M4U_PORT_L20_JPGDEC_BUFF_OFFSET0 MTK_M4U_ID(20, 21) +#define M4U_PORT_L20_VENC_CUR_LUMA MTK_M4U_ID(20, 22) +#define M4U_PORT_L20_VENC_CUR_CHROMA MTK_M4U_ID(20, 23) +#define M4U_PORT_L20_VENC_REF_LUMA MTK_M4U_ID(20, 24) +#define M4U_PORT_L20_VENC_REF_CHROMA MTK_M4U_ID(20, 25) +#define M4U_PORT_L20_VENC_SUB_R_CHROMA MTK_M4U_ID(20, 26) + +/* larb21 */ +#define M4U_PORT_L21_VDEC_MC_EXT MTK_M4U_ID(21, 0) +#define M4U_PORT_L21_VDEC_UFO_EXT MTK_M4U_ID(21, 1) +#define M4U_PORT_L21_VDEC_PP_EXT MTK_M4U_ID(21, 2) +#define M4U_PORT_L21_VDEC_PRED_RD_EXT MTK_M4U_ID(21, 3) +#define M4U_PORT_L21_VDEC_PRED_WR_EXT MTK_M4U_ID(21, 4) +#define M4U_PORT_L21_VDEC_PPWRAP_EXT MTK_M4U_ID(21, 5) +#define M4U_PORT_L21_VDEC_TILE_EXT MTK_M4U_ID(21, 6) +#define M4U_PORT_L21_VDEC_VLD_EXT MTK_M4U_ID(21, 7) +#define M4U_PORT_L21_VDEC_VLD2_EXT MTK_M4U_ID(21, 8) +#define M4U_PORT_L21_VDEC_AVC_MV_EXT MTK_M4U_ID(21, 9) + +/* larb22 */ +#define M4U_PORT_L22_VDEC_MC_EXT MTK_M4U_ID(22, 0) +#define M4U_PORT_L22_VDEC_UFO_EXT MTK_M4U_ID(22, 1) +#define M4U_PORT_L22_VDEC_PP_EXT MTK_M4U_ID(22, 2) +#define M4U_PORT_L22_VDEC_PRED_RD_EXT MTK_M4U_ID(22, 3) +#define M4U_PORT_L22_VDEC_PRED_WR_EXT MTK_M4U_ID(22, 4) +#define M4U_PORT_L22_VDEC_PPWRAP_EXT MTK_M4U_ID(22, 5) +#define M4U_PORT_L22_VDEC_TILE_EXT MTK_M4U_ID(22, 6) +#define M4U_PORT_L22_VDEC_VLD_EXT MTK_M4U_ID(22, 7) +#define M4U_PORT_L22_VDEC_VLD2_EXT MTK_M4U_ID(22, 8) +#define M4U_PORT_L22_VDEC_AVC_MV_EXT MTK_M4U_ID(22, 9) + +/* larb23 */ +#define M4U_PORT_L23_VDEC_UFO_ENC_EXT MTK_M4U_ID(23, 0) +#define M4U_PORT_L23_VDEC_RDMA_EXT MTK_M4U_ID(23, 1) + +/* larb24 */ +#define M4U_PORT_L24_VDEC_LAT0_VLD_EXT MTK_M4U_ID(24, 0) +#define M4U_PORT_L24_VDEC_LAT0_VLD2_EXT MTK_M4U_ID(24, 1) +#define M4U_PORT_L24_VDEC_LAT0_AVC_MC_EXT MTK_M4U_ID(24, 2) +#define M4U_PORT_L24_VDEC_LAT0_PRED_RD_EXT MTK_M4U_ID(24, 3) +#define M4U_PORT_L24_VDEC_LAT0_TILE_EXT MTK_M4U_ID(24, 4) +#define M4U_PORT_L24_VDEC_LAT0_WDMA_EXT MTK_M4U_ID(24, 5) +#define M4U_PORT_L24_VDEC_LAT1_VLD_EXT MTK_M4U_ID(24, 6) +#define M4U_PORT_L24_VDEC_LAT1_VLD2_EXT MTK_M4U_ID(24, 7) +#define M4U_PORT_L24_VDEC_LAT1_AVC_MC_EXT MTK_M4U_ID(24, 8) +#define M4U_PORT_L24_VDEC_LAT1_PRED_RD_EXT MTK_M4U_ID(24, 9) +#define M4U_PORT_L24_VDEC_LAT1_TILE_EXT MTK_M4U_ID(24, 10) +#define M4U_PORT_L24_VDEC_LAT1_WDMA_EXT MTK_M4U_ID(24, 11) + +/* larb25 */ +#define M4U_PORT_L25_CAM_MRAW0_LSCI_M1 MTK_M4U_ID(25, 0) +#define M4U_PORT_L25_CAM_MRAW0_CQI_M1 MTK_M4U_ID(25, 1) +#define M4U_PORT_L25_CAM_MRAW0_CQI_M2 MTK_M4U_ID(25, 2) +#define M4U_PORT_L25_CAM_MRAW0_IMGO_M1 MTK_M4U_ID(25, 3) +#define M4U_PORT_L25_CAM_MRAW0_IMGBO_M1 MTK_M4U_ID(25, 4) +#define M4U_PORT_L25_CAM_MRAW2_LSCI_M1 MTK_M4U_ID(25, 5) +#define M4U_PORT_L25_CAM_MRAW2_CQI_M1 MTK_M4U_ID(25, 6) +#define M4U_PORT_L25_CAM_MRAW2_CQI_M2 MTK_M4U_ID(25, 7) +#define M4U_PORT_L25_CAM_MRAW2_IMGO_M1 MTK_M4U_ID(25, 8) +#define M4U_PORT_L25_CAM_MRAW2_IMGBO_M1 MTK_M4U_ID(25, 9) +#define M4U_PORT_L25_CAM_MRAW0_AFO_M1 MTK_M4U_ID(25, 10) +#define M4U_PORT_L25_CAM_MRAW2_AFO_M1 MTK_M4U_ID(25, 11) + +/* larb26 */ +#define M4U_PORT_L26_CAM_MRAW1_LSCI_M1 MTK_M4U_ID(26, 0) +#define M4U_PORT_L26_CAM_MRAW1_CQI_M1 MTK_M4U_ID(26, 1) +#define M4U_PORT_L26_CAM_MRAW1_CQI_M2 MTK_M4U_ID(26, 2) +#define M4U_PORT_L26_CAM_MRAW1_IMGO_M1 MTK_M4U_ID(26, 3) +#define M4U_PORT_L26_CAM_MRAW1_IMGBO_M1 MTK_M4U_ID(26, 4) +#define M4U_PORT_L26_CAM_MRAW3_LSCI_M1 MTK_M4U_ID(26, 5) +#define M4U_PORT_L26_CAM_MRAW3_CQI_M1 MTK_M4U_ID(26, 6) +#define M4U_PORT_L26_CAM_MRAW3_CQI_M2 MTK_M4U_ID(26, 7) +#define M4U_PORT_L26_CAM_MRAW3_IMGO_M1 MTK_M4U_ID(26, 8) +#define M4U_PORT_L26_CAM_MRAW3_IMGBO_M1 MTK_M4U_ID(26, 9) +#define M4U_PORT_L26_CAM_MRAW1_AFO_M1 MTK_M4U_ID(26, 10) +#define M4U_PORT_L26_CAM_MRAW3_AFO_M1 MTK_M4U_ID(26, 11) + +/* larb27 */ +#define M4U_PORT_L27_CAM_IMGO_R1 MTK_M4U_ID(27, 0) +#define M4U_PORT_L27_CAM_CQI_R1 MTK_M4U_ID(27, 1) +#define M4U_PORT_L27_CAM_CQI_R2 MTK_M4U_ID(27, 2) +#define M4U_PORT_L27_CAM_BPCI_R1 MTK_M4U_ID(27, 3) +#define M4U_PORT_L27_CAM_LSCI_R1 MTK_M4U_ID(27, 4) +#define M4U_PORT_L27_CAM_RAWI_R2 MTK_M4U_ID(27, 5) +#define M4U_PORT_L27_CAM_RAWI_R3 MTK_M4U_ID(27, 6) +#define M4U_PORT_L27_CAM_UFDI_R2 MTK_M4U_ID(27, 7) +#define M4U_PORT_L27_CAM_UFDI_R3 MTK_M4U_ID(27, 8) +#define M4U_PORT_L27_CAM_RAWI_R4 MTK_M4U_ID(27, 9) +#define M4U_PORT_L27_CAM_RAWI_R5 MTK_M4U_ID(27, 10) +#define M4U_PORT_L27_CAM_AAI_R1 MTK_M4U_ID(27, 11) +#define M4U_PORT_L27_CAM_FHO_R1 MTK_M4U_ID(27, 12) +#define M4U_PORT_L27_CAM_AAO_R1 MTK_M4U_ID(27, 13) +#define M4U_PORT_L27_CAM_TSFSO_R1 MTK_M4U_ID(27, 14) +#define M4U_PORT_L27_CAM_FLKO_R1 MTK_M4U_ID(27, 15) + +/* larb28 */ +#define M4U_PORT_L28_CAM_YUVO_R1 MTK_M4U_ID(28, 0) +#define M4U_PORT_L28_CAM_YUVO_R3 MTK_M4U_ID(28, 1) +#define M4U_PORT_L28_CAM_YUVCO_R1 MTK_M4U_ID(28, 2) +#define M4U_PORT_L28_CAM_YUVO_R2 MTK_M4U_ID(28, 3) +#define M4U_PORT_L28_CAM_RZH1N2TO_R1 MTK_M4U_ID(28, 4) +#define M4U_PORT_L28_CAM_DRZS4NO_R1 MTK_M4U_ID(28, 5) +#define M4U_PORT_L28_CAM_TNCSO_R1 MTK_M4U_ID(28, 6) + +/* Infra iommu ports */ +/* PCIe1: read: BIT16; write BIT17. */ +#define IOMMU_PORT_INFRA_PCIE1 MTK_IFAIOMMU_PERI_ID(16) +/* PCIe0: read: BIT18; write BIT19. */ +#define IOMMU_PORT_INFRA_PCIE0 MTK_IFAIOMMU_PERI_ID(18) +#define IOMMU_PORT_INFRA_SSUSB_P3_R MTK_IFAIOMMU_PERI_ID(20) +#define IOMMU_PORT_INFRA_SSUSB_P3_W MTK_IFAIOMMU_PERI_ID(21) +#define IOMMU_PORT_INFRA_SSUSB_P2_R MTK_IFAIOMMU_PERI_ID(22) +#define IOMMU_PORT_INFRA_SSUSB_P2_W MTK_IFAIOMMU_PERI_ID(23) +#define IOMMU_PORT_INFRA_SSUSB_P1_1_R MTK_IFAIOMMU_PERI_ID(24) +#define IOMMU_PORT_INFRA_SSUSB_P1_1_W MTK_IFAIOMMU_PERI_ID(25) +#define IOMMU_PORT_INFRA_SSUSB_P1_0_R MTK_IFAIOMMU_PERI_ID(26) +#define IOMMU_PORT_INFRA_SSUSB_P1_0_W MTK_IFAIOMMU_PERI_ID(27) +#define IOMMU_PORT_INFRA_SSUSB2_R MTK_IFAIOMMU_PERI_ID(28) +#define IOMMU_PORT_INFRA_SSUSB2_W MTK_IFAIOMMU_PERI_ID(29) +#define IOMMU_PORT_INFRA_SSUSB_R MTK_IFAIOMMU_PERI_ID(30) +#define IOMMU_PORT_INFRA_SSUSB_W MTK_IFAIOMMU_PERI_ID(31) + +#endif diff --git a/dts/include/dt-bindings/memory/mtk-memory-port.h b/dts/include/dt-bindings/memory/mtk-memory-port.h index 7d64103209..2f68a0511a 100644 --- a/dts/include/dt-bindings/memory/mtk-memory-port.h +++ b/dts/include/dt-bindings/memory/mtk-memory-port.h @@ -12,4 +12,6 @@ #define MTK_M4U_TO_LARB(id) (((id) >> 5) & 0x1f) #define MTK_M4U_TO_PORT(id) ((id) & 0x1f) +#define MTK_IFAIOMMU_PERI_ID(port) MTK_M4U_ID(0, port) + #endif diff --git a/dts/include/dt-bindings/mfd/cros_ec.h b/dts/include/dt-bindings/mfd/cros_ec.h new file mode 100644 index 0000000000..3b29cd0495 --- /dev/null +++ b/dts/include/dt-bindings/mfd/cros_ec.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * DTS binding definitions used for the Chromium OS Embedded Controller. + * + * Copyright (c) 2022 The Chromium OS Authors. All rights reserved. + */ + +#ifndef _DT_BINDINGS_MFD_CROS_EC_H +#define _DT_BINDINGS_MFD_CROS_EC_H + +/* Typed channel for keyboard backlight. */ +#define CROS_EC_PWM_DT_KB_LIGHT 0 +/* Typed channel for display backlight. */ +#define CROS_EC_PWM_DT_DISPLAY_LIGHT 1 +/* Number of typed channels. */ +#define CROS_EC_PWM_DT_COUNT 2 + +#endif diff --git a/dts/include/dt-bindings/pinctrl/mt6795-pinfunc.h b/dts/include/dt-bindings/pinctrl/mt6795-pinfunc.h new file mode 100644 index 0000000000..bd1c5a9fad --- /dev/null +++ b/dts/include/dt-bindings/pinctrl/mt6795-pinfunc.h @@ -0,0 +1,908 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2022 Collabora Ltd. + * Author: AngeloGioacchino Del Regno + */ + +#ifndef __DTS_MT8173_PINFUNC_H +#define __DTS_MT8173_PINFUNC_H + +#include + +#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define PINMUX_GPIO0__FUNC_IRDA_PDN (MTK_PIN_NO(0) | 1) +#define PINMUX_GPIO0__FUNC_I2S1_WS (MTK_PIN_NO(0) | 2) +#define PINMUX_GPIO0__FUNC_TDD_TMS (MTK_PIN_NO(0) | 4) +#define PINMUX_GPIO0__FUNC_UTXD0 (MTK_PIN_NO(0) | 5) + +#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define PINMUX_GPIO1__FUNC_IRDA_RXD (MTK_PIN_NO(1) | 1) +#define PINMUX_GPIO1__FUNC_I2S1_BCK (MTK_PIN_NO(1) | 2) +#define PINMUX_GPIO1__FUNC_SDA4 (MTK_PIN_NO(1) | 3) +#define PINMUX_GPIO1__FUNC_TDD_TCK (MTK_PIN_NO(1) | 4) +#define PINMUX_GPIO1__FUNC_URXD0 (MTK_PIN_NO(1) | 5) + +#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define PINMUX_GPIO2__FUNC_IRDA_TXD (MTK_PIN_NO(2) | 1) +#define PINMUX_GPIO2__FUNC_I2S1_MCK (MTK_PIN_NO(2) | 2) +#define PINMUX_GPIO2__FUNC_SCL4 (MTK_PIN_NO(2) | 3) +#define PINMUX_GPIO2__FUNC_TDD_TDI (MTK_PIN_NO(2) | 4) +#define PINMUX_GPIO2__FUNC_UTXD3 (MTK_PIN_NO(2) | 5) + +#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define PINMUX_GPIO3__FUNC_DSI1_TE (MTK_PIN_NO(3) | 1) +#define PINMUX_GPIO3__FUNC_I2S1_DO_1 (MTK_PIN_NO(3) | 2) +#define PINMUX_GPIO3__FUNC_SDA3 (MTK_PIN_NO(3) | 3) +#define PINMUX_GPIO3__FUNC_TDD_TDO (MTK_PIN_NO(3) | 4) +#define PINMUX_GPIO3__FUNC_URXD3 (MTK_PIN_NO(3) | 5) + +#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define PINMUX_GPIO4__FUNC_DISP_PWM1 (MTK_PIN_NO(4) | 1) +#define PINMUX_GPIO4__FUNC_I2S1_DO_2 (MTK_PIN_NO(4) | 2) +#define PINMUX_GPIO4__FUNC_SCL3 (MTK_PIN_NO(4) | 3) +#define PINMUX_GPIO4__FUNC_TDD_TRSTN (MTK_PIN_NO(4) | 4) + +#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define PINMUX_GPIO5__FUNC_PCM1_CLK (MTK_PIN_NO(5) | 1) +#define PINMUX_GPIO5__FUNC_I2S2_WS (MTK_PIN_NO(5) | 2) +#define PINMUX_GPIO5__FUNC_SPI_CK_3 (MTK_PIN_NO(5) | 3) +#define PINMUX_GPIO5__FUNC_LTE_MD32_JTAG_TMS (MTK_PIN_NO(5) | 4) +#define PINMUX_GPIO5__FUNC_AP_MD32_JTAG_TMS (MTK_PIN_NO(5) | 5) + +#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define PINMUX_GPIO6__FUNC_PCM1_SYNC (MTK_PIN_NO(6) | 1) +#define PINMUX_GPIO6__FUNC_I2S2_BCK (MTK_PIN_NO(6) | 2) +#define PINMUX_GPIO6__FUNC_SPI_MI_3 (MTK_PIN_NO(6) | 3) +#define PINMUX_GPIO6__FUNC_LTE_MD32_JTAG_TCK (MTK_PIN_NO(6) | 4) +#define PINMUX_GPIO6__FUNC_AP_MD32_JTAG_TCK (MTK_PIN_NO(6) | 5) + +#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define PINMUX_GPIO7__FUNC_PCM1_DI (MTK_PIN_NO(7) | 1) +#define PINMUX_GPIO7__FUNC_I2S2_DI_1 (MTK_PIN_NO(7) | 2) +#define PINMUX_GPIO7__FUNC_SPI_MO_3 (MTK_PIN_NO(7) | 3) +#define PINMUX_GPIO7__FUNC_LTE_MD32_JTAG_TDI (MTK_PIN_NO(7) | 4) +#define PINMUX_GPIO7__FUNC_AP_MD32_JTAG_TDI (MTK_PIN_NO(7) | 5) + +#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define PINMUX_GPIO8__FUNC_PCM1_DO (MTK_PIN_NO(8) | 1) +#define PINMUX_GPIO8__FUNC_I2S2_DI_2 (MTK_PIN_NO(8) | 2) +#define PINMUX_GPIO8__FUNC_SPI_CS_3 (MTK_PIN_NO(8) | 3) +#define PINMUX_GPIO8__FUNC_LTE_MD32_JTAG_TDO (MTK_PIN_NO(8) | 4) +#define PINMUX_GPIO8__FUNC_AP_MD32_JTAG_TDO (MTK_PIN_NO(8) | 5) + +#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define PINMUX_GPIO9__FUNC_USB_DRVVBUS (MTK_PIN_NO(9) | 1) +#define PINMUX_GPIO9__FUNC_I2S2_MCK (MTK_PIN_NO(9) | 2) +#define PINMUX_GPIO9__FUNC_LTE_MD32_JTAG_TRST (MTK_PIN_NO(9) | 4) +#define PINMUX_GPIO9__FUNC_AP_MD32_JTAG_TRST (MTK_PIN_NO(9) | 5) + +#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define PINMUX_GPIO10__FUNC_I2S0_WS (MTK_PIN_NO(10) | 2) + +#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define PINMUX_GPIO11__FUNC_I2S0_BCK (MTK_PIN_NO(11) | 2) + +#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define PINMUX_GPIO12__FUNC_I2S0_MCK (MTK_PIN_NO(12) | 2) + +#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define PINMUX_GPIO13__FUNC_I2S0_DO (MTK_PIN_NO(13) | 2) + +#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define PINMUX_GPIO14__FUNC_I2S0_DI (MTK_PIN_NO(14) | 2) +#define PINMUX_GPIO14__FUNC_DISP_PWM1 (MTK_PIN_NO(14) | 3) +#define PINMUX_GPIO14__FUNC_PWM4 (MTK_PIN_NO(14) | 4) +#define PINMUX_GPIO14__FUNC_IRDA_RXD (MTK_PIN_NO(14) | 5) +#define PINMUX_GPIO14__FUNC_I2S1_BCK (MTK_PIN_NO(14) | 6) + +#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define PINMUX_GPIO15__FUNC_DSI1_TE (MTK_PIN_NO(15) | 2) +#define PINMUX_GPIO15__FUNC_USB_DRVVBUS (MTK_PIN_NO(15) | 3) +#define PINMUX_GPIO15__FUNC_PWM5 (MTK_PIN_NO(15) | 4) +#define PINMUX_GPIO15__FUNC_IRDA_TXD (MTK_PIN_NO(15) | 5) +#define PINMUX_GPIO15__FUNC_I2S1_MCK (MTK_PIN_NO(15) | 6) + +#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) +#define PINMUX_GPIO16__FUNC_IDDIG (MTK_PIN_NO(16) | 1) +#define PINMUX_GPIO16__FUNC_FLASH (MTK_PIN_NO(16) | 2) +#define PINMUX_GPIO16__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(16) | 3) +#define PINMUX_GPIO16__FUNC_PWM5 (MTK_PIN_NO(16) | 4) + +#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) +#define PINMUX_GPIO17__FUNC_SIM1_SCLK (MTK_PIN_NO(17) | 1) +#define PINMUX_GPIO17__FUNC_SIM2_SCLK (MTK_PIN_NO(17) | 2) + +#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define PINMUX_GPIO18__FUNC_SIM1_SRST (MTK_PIN_NO(18) | 1) +#define PINMUX_GPIO18__FUNC_SIM2_SRST (MTK_PIN_NO(18) | 2) + +#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define PINMUX_GPIO19__FUNC_SIM1_SDAT (MTK_PIN_NO(19) | 1) +#define PINMUX_GPIO19__FUNC_SIM2_SDAT (MTK_PIN_NO(19) | 2) + +#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define PINMUX_GPIO20__FUNC_SIM2_SCLK (MTK_PIN_NO(20) | 1) +#define PINMUX_GPIO20__FUNC_SIM1_SCLK (MTK_PIN_NO(20) | 2) + +#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define PINMUX_GPIO21__FUNC_SIM2_SRST (MTK_PIN_NO(21) | 1) +#define PINMUX_GPIO21__FUNC_SIM1_SRST (MTK_PIN_NO(21) | 2) + +#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define PINMUX_GPIO22__FUNC_SIM2_SDAT (MTK_PIN_NO(22) | 1) +#define PINMUX_GPIO22__FUNC_SIM1_SDAT (MTK_PIN_NO(22) | 2) + +#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define PINMUX_GPIO23__FUNC_MSDC3_DAT0 (MTK_PIN_NO(23) | 1) + +#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define PINMUX_GPIO24__FUNC_MSDC3_DAT1 (MTK_PIN_NO(24) | 1) + +#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define PINMUX_GPIO25__FUNC_MSDC3_DAT2 (MTK_PIN_NO(25) | 1) + +#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define PINMUX_GPIO26__FUNC_MSDC3_DAT3 (MTK_PIN_NO(26) | 1) + +#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define PINMUX_GPIO27__FUNC_MSDC3_CLK (MTK_PIN_NO(27) | 1) + +#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define PINMUX_GPIO28__FUNC_MSDC3_CMD (MTK_PIN_NO(28) | 1) + +#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define PINMUX_GPIO29__FUNC_PTA_RXD (MTK_PIN_NO(29) | 1) +#define PINMUX_GPIO29__FUNC_UCTS2 (MTK_PIN_NO(29) | 2) + +#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) +#define PINMUX_GPIO30__FUNC_PTA_TXD (MTK_PIN_NO(30) | 1) +#define PINMUX_GPIO30__FUNC_URTS2 (MTK_PIN_NO(30) | 2) + +#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) +#define PINMUX_GPIO31__FUNC_URXD2 (MTK_PIN_NO(31) | 1) +#define PINMUX_GPIO31__FUNC_UTXD2 (MTK_PIN_NO(31) | 2) + +#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) +#define PINMUX_GPIO32__FUNC_UTXD2 (MTK_PIN_NO(32) | 1) +#define PINMUX_GPIO32__FUNC_URXD2 (MTK_PIN_NO(32) | 2) + +#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define PINMUX_GPIO33__FUNC_MRG_CLK (MTK_PIN_NO(33) | 1) +#define PINMUX_GPIO33__FUNC_PCM0_CLK (MTK_PIN_NO(33) | 2) + +#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define PINMUX_GPIO34__FUNC_MRG_DI (MTK_PIN_NO(34) | 1) +#define PINMUX_GPIO34__FUNC_PCM0_DI (MTK_PIN_NO(34) | 2) + +#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define PINMUX_GPIO35__FUNC_MRG_DO (MTK_PIN_NO(35) | 1) +#define PINMUX_GPIO35__FUNC_PCM0_DO (MTK_PIN_NO(35) | 2) + +#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define PINMUX_GPIO36__FUNC_MRG_SYNC (MTK_PIN_NO(36) | 1) +#define PINMUX_GPIO36__FUNC_PCM0_SYNC (MTK_PIN_NO(36) | 2) + +#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define PINMUX_GPIO37__FUNC_GPS_SYNC (MTK_PIN_NO(37) | 1) + +#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) +#define PINMUX_GPIO38__FUNC_DAIRSTB (MTK_PIN_NO(38) | 1) + +#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define PINMUX_GPIO39__FUNC_CM2MCLK (MTK_PIN_NO(39) | 1) + +#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define PINMUX_GPIO40__FUNC_CM3MCLK (MTK_PIN_NO(40) | 1) +#define PINMUX_GPIO40__FUNC_IRDA_PDN (MTK_PIN_NO(40) | 2) +#define PINMUX_GPIO40__FUNC_PWM6 (MTK_PIN_NO(40) | 3) +#define PINMUX_GPIO40__FUNC_I2S1_WS (MTK_PIN_NO(40) | 4) + +#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define PINMUX_GPIO41__FUNC_CMPCLK (MTK_PIN_NO(41) | 1) +#define PINMUX_GPIO41__FUNC_CMCSK (MTK_PIN_NO(41) | 2) +#define PINMUX_GPIO41__FUNC_FLASH (MTK_PIN_NO(41) | 3) + +#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define PINMUX_GPIO42__FUNC_CMMCLK (MTK_PIN_NO(42) | 1) + +#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define PINMUX_GPIO43__FUNC_SDA2 (MTK_PIN_NO(43) | 1) + +#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define PINMUX_GPIO44__FUNC_SCL2 (MTK_PIN_NO(44) | 1) + +#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define PINMUX_GPIO45__FUNC_SDA0 (MTK_PIN_NO(45) | 1) + +#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define PINMUX_GPIO46__FUNC_SCL0 (MTK_PIN_NO(46) | 1) + +#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define PINMUX_GPIO47__FUNC_BPI_BUS0 (MTK_PIN_NO(47) | 1) + +#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define PINMUX_GPIO48__FUNC_BPI_BUS1 (MTK_PIN_NO(48) | 1) + +#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define PINMUX_GPIO49__FUNC_BPI_BUS2 (MTK_PIN_NO(49) | 1) + +#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) +#define PINMUX_GPIO50__FUNC_BPI_BUS3 (MTK_PIN_NO(50) | 1) + +#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) +#define PINMUX_GPIO51__FUNC_BPI_BUS4 (MTK_PIN_NO(51) | 1) + +#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) +#define PINMUX_GPIO52__FUNC_BPI_BUS5 (MTK_PIN_NO(52) | 1) + +#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define PINMUX_GPIO53__FUNC_BPI_BUS6 (MTK_PIN_NO(53) | 1) + +#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define PINMUX_GPIO54__FUNC_BPI_BUS7 (MTK_PIN_NO(54) | 1) + +#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define PINMUX_GPIO55__FUNC_BPI_BUS8 (MTK_PIN_NO(55) | 1) + +#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define PINMUX_GPIO56__FUNC_BPI_BUS9 (MTK_PIN_NO(56) | 1) + +#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define PINMUX_GPIO57__FUNC_BPI_BUS10 (MTK_PIN_NO(57) | 1) + +#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define PINMUX_GPIO58__FUNC_BPI_BUS11 (MTK_PIN_NO(58) | 1) + +#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) +#define PINMUX_GPIO59__FUNC_BPI_BUS12 (MTK_PIN_NO(59) | 1) + +#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) +#define PINMUX_GPIO60__FUNC_BPI_BUS13 (MTK_PIN_NO(60) | 1) + +#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) +#define PINMUX_GPIO61__FUNC_BPI_BUS14 (MTK_PIN_NO(61) | 1) + +#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) +#define PINMUX_GPIO62__FUNC_RFIC1_BSI_CK (MTK_PIN_NO(62) | 1) + +#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) +#define PINMUX_GPIO63__FUNC_RFIC1_BSI_D0 (MTK_PIN_NO(63) | 1) + +#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) +#define PINMUX_GPIO64__FUNC_RFIC1_BSI_D1 (MTK_PIN_NO(64) | 1) + +#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) +#define PINMUX_GPIO65__FUNC_RFIC1_BSI_D2 (MTK_PIN_NO(65) | 1) + +#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0) +#define PINMUX_GPIO66__FUNC_RFIC1_BSI_CS (MTK_PIN_NO(66) | 1) + +#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0) +#define PINMUX_GPIO67__FUNC_TD_TXBPI (MTK_PIN_NO(67) | 1) + +#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0) +#define PINMUX_GPIO68__FUNC_RFIC0_BSI_CK (MTK_PIN_NO(68) | 1) + +#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) +#define PINMUX_GPIO69__FUNC_RFIC0_BSI_D0 (MTK_PIN_NO(69) | 1) + +#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) +#define PINMUX_GPIO70__FUNC_RFIC0_BSI_D1 (MTK_PIN_NO(70) | 1) + +#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) +#define PINMUX_GPIO71__FUNC_RFIC0_BSI_D2 (MTK_PIN_NO(71) | 1) + +#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define PINMUX_GPIO72__FUNC_RFIC0_BSI_CS (MTK_PIN_NO(72) | 1) + +#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define PINMUX_GPIO73__FUNC_MISC_BSI_DO (MTK_PIN_NO(73) | 1) + +#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define PINMUX_GPIO74__FUNC_MISC_BSI_CK (MTK_PIN_NO(74) | 1) + +#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define PINMUX_GPIO75__FUNC_MISC_BSI_CS0B (MTK_PIN_NO(75) | 1) +#define PINMUX_GPIO75__FUNC_MIPI1_SCLK (MTK_PIN_NO(75) | 2) + +#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define PINMUX_GPIO76__FUNC_MISC_BSI_CS1B (MTK_PIN_NO(76) | 1) + +#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define PINMUX_GPIO77__FUNC_MISC_BSI_DI (MTK_PIN_NO(77) | 1) +#define PINMUX_GPIO77__FUNC_MIPI1_SDATA (MTK_PIN_NO(77) | 2) + +#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define PINMUX_GPIO78__FUNC_LTE_TXBPI (MTK_PIN_NO(78) | 1) + +#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define PINMUX_GPIO79__FUNC_BPI_BUS15 (MTK_PIN_NO(79) | 1) + +#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define PINMUX_GPIO80__FUNC_BPI_BUS16 (MTK_PIN_NO(80) | 1) + +#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define PINMUX_GPIO81__FUNC_BPI_BUS17 (MTK_PIN_NO(81) | 1) + +#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define PINMUX_GPIO82__FUNC_BPI_BUS18 (MTK_PIN_NO(82) | 1) + +#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define PINMUX_GPIO83__FUNC_BPI_BUS19 (MTK_PIN_NO(83) | 1) + +#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define PINMUX_GPIO84__FUNC_BPI_BUS20 (MTK_PIN_NO(84) | 1) + +#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0) +#define PINMUX_GPIO85__FUNC_BPI_BUS21 (MTK_PIN_NO(85) | 1) + +#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0) +#define PINMUX_GPIO86__FUNC_BPI_BUS22 (MTK_PIN_NO(86) | 1) + +#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0) +#define PINMUX_GPIO87__FUNC_BPI_BUS23 (MTK_PIN_NO(87) | 1) + +#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0) +#define PINMUX_GPIO88__FUNC_BPI_BUS24 (MTK_PIN_NO(88) | 1) + +#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0) +#define PINMUX_GPIO89__FUNC_BPI_BUS25 (MTK_PIN_NO(89) | 1) + +#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0) +#define PINMUX_GPIO90__FUNC_BPI_BUS26 (MTK_PIN_NO(90) | 1) + +#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0) +#define PINMUX_GPIO91__FUNC_BPI_BUS27 (MTK_PIN_NO(91) | 1) + +#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0) +#define PINMUX_GPIO92__FUNC_PCM1_CLK (MTK_PIN_NO(92) | 1) +#define PINMUX_GPIO92__FUNC_I2S0_BCK (MTK_PIN_NO(92) | 2) +#define PINMUX_GPIO92__FUNC_NLD6 (MTK_PIN_NO(92) | 3) + +#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0) +#define PINMUX_GPIO93__FUNC_PCM1_SYNC (MTK_PIN_NO(93) | 1) +#define PINMUX_GPIO93__FUNC_I2S0_WS (MTK_PIN_NO(93) | 2) +#define PINMUX_GPIO93__FUNC_NLD7 (MTK_PIN_NO(93) | 3) + +#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0) +#define PINMUX_GPIO94__FUNC_PCM1_DI (MTK_PIN_NO(94) | 1) +#define PINMUX_GPIO94__FUNC_I2S0_DI (MTK_PIN_NO(94) | 2) +#define PINMUX_GPIO94__FUNC_NREB (MTK_PIN_NO(94) | 3) + +#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0) +#define PINMUX_GPIO95__FUNC_PCM1_DO (MTK_PIN_NO(95) | 1) +#define PINMUX_GPIO95__FUNC_I2S0_DO (MTK_PIN_NO(95) | 2) +#define PINMUX_GPIO95__FUNC_NRNB0 (MTK_PIN_NO(95) | 3) + +#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0) +#define PINMUX_GPIO96__FUNC_URXD1 (MTK_PIN_NO(96) | 1) +#define PINMUX_GPIO96__FUNC_UTXD1 (MTK_PIN_NO(96) | 2) +#define PINMUX_GPIO96__FUNC_NWEB (MTK_PIN_NO(96) | 3) + +#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0) +#define PINMUX_GPIO97__FUNC_UTXD1 (MTK_PIN_NO(97) | 1) +#define PINMUX_GPIO97__FUNC_URXD1 (MTK_PIN_NO(97) | 2) +#define PINMUX_GPIO97__FUNC_NCEB0 (MTK_PIN_NO(97) | 3) + +#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0) +#define PINMUX_GPIO98__FUNC_URTS1 (MTK_PIN_NO(98) | 1) +#define PINMUX_GPIO98__FUNC_UCTS1 (MTK_PIN_NO(98) | 2) +#define PINMUX_GPIO98__FUNC_NALE (MTK_PIN_NO(98) | 3) + +#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0) +#define PINMUX_GPIO99__FUNC_UCTS1 (MTK_PIN_NO(99) | 1) +#define PINMUX_GPIO99__FUNC_URTS1 (MTK_PIN_NO(99) | 2) +#define PINMUX_GPIO99__FUNC_NCLE (MTK_PIN_NO(99) | 3) + +#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) +#define PINMUX_GPIO100__FUNC_MSDC2_DAT0 (MTK_PIN_NO(100) | 1) +#define PINMUX_GPIO100__FUNC_URXD1 (MTK_PIN_NO(100) | 2) +#define PINMUX_GPIO100__FUNC_USB_DRVVBUS (MTK_PIN_NO(100) | 3) +#define PINMUX_GPIO100__FUNC_SDA4 (MTK_PIN_NO(100) | 4) + +#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define PINMUX_GPIO101__FUNC_MSDC2_DAT1 (MTK_PIN_NO(101) | 1) +#define PINMUX_GPIO101__FUNC_UTXD1 (MTK_PIN_NO(101) | 2) +#define PINMUX_GPIO101__FUNC_SCL4 (MTK_PIN_NO(101) | 4) + +#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define PINMUX_GPIO102__FUNC_MSDC2_DAT2 (MTK_PIN_NO(102) | 1) +#define PINMUX_GPIO102__FUNC_URTS1 (MTK_PIN_NO(102) | 2) +#define PINMUX_GPIO102__FUNC_UTXD0 (MTK_PIN_NO(102) | 3) +#define PINMUX_GPIO102__FUNC_PWM0 (MTK_PIN_NO(102) | 5) +#define PINMUX_GPIO102__FUNC_SPI_CK_1 (MTK_PIN_NO(102) | 6) + +#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define PINMUX_GPIO103__FUNC_MSDC2_DAT3 (MTK_PIN_NO(103) | 1) +#define PINMUX_GPIO103__FUNC_UCTS1 (MTK_PIN_NO(103) | 2) +#define PINMUX_GPIO103__FUNC_URXD0 (MTK_PIN_NO(103) | 3) +#define PINMUX_GPIO103__FUNC_PWM1 (MTK_PIN_NO(103) | 5) +#define PINMUX_GPIO103__FUNC_SPI_MI_1 (MTK_PIN_NO(103) | 6) + +#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define PINMUX_GPIO104__FUNC_MSDC2_CLK (MTK_PIN_NO(104) | 1) +#define PINMUX_GPIO104__FUNC_NLD4 (MTK_PIN_NO(104) | 2) +#define PINMUX_GPIO104__FUNC_UTXD3 (MTK_PIN_NO(104) | 3) +#define PINMUX_GPIO104__FUNC_SDA3 (MTK_PIN_NO(104) | 4) +#define PINMUX_GPIO104__FUNC_PWM2 (MTK_PIN_NO(104) | 5) +#define PINMUX_GPIO104__FUNC_SPI_MO_1 (MTK_PIN_NO(104) | 6) + +#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define PINMUX_GPIO105__FUNC_MSDC2_CMD (MTK_PIN_NO(105) | 1) +#define PINMUX_GPIO105__FUNC_NLD5 (MTK_PIN_NO(105) | 2) +#define PINMUX_GPIO105__FUNC_URXD3 (MTK_PIN_NO(105) | 3) +#define PINMUX_GPIO105__FUNC_SCL3 (MTK_PIN_NO(105) | 4) +#define PINMUX_GPIO105__FUNC_PWM3 (MTK_PIN_NO(105) | 5) +#define PINMUX_GPIO105__FUNC_SPI_CS_1 (MTK_PIN_NO(105) | 6) + +#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define PINMUX_GPIO106__FUNC_LCM_RST (MTK_PIN_NO(106) | 1) + +#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define PINMUX_GPIO107__FUNC_DSI_TE (MTK_PIN_NO(107) | 1) + +#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define PINMUX_GPIO108__FUNC_JTMS (MTK_PIN_NO(108) | 1) +#define PINMUX_GPIO108__FUNC_MFG_JTAG_TMS (MTK_PIN_NO(108) | 2) +#define PINMUX_GPIO108__FUNC_TDD_TMS (MTK_PIN_NO(108) | 3) +#define PINMUX_GPIO108__FUNC_LTE_MD32_JTAG_TMS (MTK_PIN_NO(108) | 4) +#define PINMUX_GPIO108__FUNC_AP_MD32_JTAG_TMS (MTK_PIN_NO(108) | 5) +#define PINMUX_GPIO108__FUNC_DFD_TMS (MTK_PIN_NO(108) | 6) + +#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define PINMUX_GPIO109__FUNC_JTCK (MTK_PIN_NO(109) | 1) +#define PINMUX_GPIO109__FUNC_MFG_JTAG_TCK (MTK_PIN_NO(109) | 2) +#define PINMUX_GPIO109__FUNC_TDD_TCK (MTK_PIN_NO(109) | 3) +#define PINMUX_GPIO109__FUNC_LTE_MD32_JTAG_TCK (MTK_PIN_NO(109) | 4) +#define PINMUX_GPIO109__FUNC_AP_MD32_JTAG_TCK (MTK_PIN_NO(109) | 5) +#define PINMUX_GPIO109__FUNC_DFD_TCK (MTK_PIN_NO(109) | 6) + +#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define PINMUX_GPIO110__FUNC_JTDI (MTK_PIN_NO(110) | 1) +#define PINMUX_GPIO110__FUNC_MFG_JTAG_TDI (MTK_PIN_NO(110) | 2) +#define PINMUX_GPIO110__FUNC_TDD_TDI (MTK_PIN_NO(110) | 3) +#define PINMUX_GPIO110__FUNC_LTE_MD32_JTAG_TDI (MTK_PIN_NO(110) | 4) +#define PINMUX_GPIO110__FUNC_AP_MD32_JTAG_TDI (MTK_PIN_NO(110) | 5) +#define PINMUX_GPIO110__FUNC_DFD_TDI (MTK_PIN_NO(110) | 6) + +#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define PINMUX_GPIO111__FUNC_JTDO (MTK_PIN_NO(111) | 1) +#define PINMUX_GPIO111__FUNC_MFG_JTAG_TDO (MTK_PIN_NO(111) | 2) +#define PINMUX_GPIO111__FUNC_TDD_TDO (MTK_PIN_NO(111) | 3) +#define PINMUX_GPIO111__FUNC_LTE_MD32_JTAG_TDO (MTK_PIN_NO(111) | 4) +#define PINMUX_GPIO111__FUNC_AP_MD32_JTAG_TDO (MTK_PIN_NO(111) | 5) +#define PINMUX_GPIO111__FUNC_DFD_TDO (MTK_PIN_NO(111) | 6) + +#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define PINMUX_GPIO112__FUNC_JTRST_B (MTK_PIN_NO(112) | 1) +#define PINMUX_GPIO112__FUNC_MFG_JTAG_TRSTN (MTK_PIN_NO(112) | 2) +#define PINMUX_GPIO112__FUNC_TDD_TRSTN (MTK_PIN_NO(112) | 3) +#define PINMUX_GPIO112__FUNC_LTE_MD32_JTAG_TRST (MTK_PIN_NO(112) | 4) +#define PINMUX_GPIO112__FUNC_AP_MD32_JTAG_TRST (MTK_PIN_NO(112) | 5) +#define PINMUX_GPIO112__FUNC_DFD_NTRST (MTK_PIN_NO(112) | 6) + +#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define PINMUX_GPIO113__FUNC_URXD0 (MTK_PIN_NO(113) | 1) +#define PINMUX_GPIO113__FUNC_UTXD0 (MTK_PIN_NO(113) | 2) +#define PINMUX_GPIO113__FUNC_MD_URXD (MTK_PIN_NO(113) | 3) +#define PINMUX_GPIO113__FUNC_LTE_URXD (MTK_PIN_NO(113) | 4) +#define PINMUX_GPIO113__FUNC_TDD_TXD (MTK_PIN_NO(113) | 5) +#define PINMUX_GPIO113__FUNC_I2S2_WS (MTK_PIN_NO(113) | 6) + +#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define PINMUX_GPIO114__FUNC_UTXD0 (MTK_PIN_NO(114) | 1) +#define PINMUX_GPIO114__FUNC_URXD0 (MTK_PIN_NO(114) | 2) +#define PINMUX_GPIO114__FUNC_MD_UTXD (MTK_PIN_NO(114) | 3) +#define PINMUX_GPIO114__FUNC_LTE_UTXD (MTK_PIN_NO(114) | 4) +#define PINMUX_GPIO114__FUNC_TDD_TXD (MTK_PIN_NO(114) | 5) +#define PINMUX_GPIO114__FUNC_I2S2_BCK (MTK_PIN_NO(114) | 6) + +#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define PINMUX_GPIO115__FUNC_URTS0 (MTK_PIN_NO(115) | 1) +#define PINMUX_GPIO115__FUNC_UCTS0 (MTK_PIN_NO(115) | 2) +#define PINMUX_GPIO115__FUNC_MD_URXD (MTK_PIN_NO(115) | 3) +#define PINMUX_GPIO115__FUNC_LTE_URXD (MTK_PIN_NO(115) | 4) +#define PINMUX_GPIO115__FUNC_TDD_TXD (MTK_PIN_NO(115) | 5) +#define PINMUX_GPIO115__FUNC_I2S2_MCK (MTK_PIN_NO(115) | 6) + +#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define PINMUX_GPIO116__FUNC_UCTS0 (MTK_PIN_NO(116) | 1) +#define PINMUX_GPIO116__FUNC_URTS0 (MTK_PIN_NO(116) | 2) +#define PINMUX_GPIO116__FUNC_MD_UTXD (MTK_PIN_NO(116) | 3) +#define PINMUX_GPIO116__FUNC_LTE_UTXD (MTK_PIN_NO(116) | 4) +#define PINMUX_GPIO116__FUNC_TDD_TXD (MTK_PIN_NO(116) | 5) +#define PINMUX_GPIO116__FUNC_I2S2_DI_1 (MTK_PIN_NO(116) | 6) + +#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define PINMUX_GPIO117__FUNC_URXD3 (MTK_PIN_NO(117) | 1) +#define PINMUX_GPIO117__FUNC_UTXD3 (MTK_PIN_NO(117) | 2) +#define PINMUX_GPIO117__FUNC_MD_URXD (MTK_PIN_NO(117) | 3) +#define PINMUX_GPIO117__FUNC_LTE_URXD (MTK_PIN_NO(117) | 4) +#define PINMUX_GPIO117__FUNC_TDD_TXD (MTK_PIN_NO(117) | 5) + +#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define PINMUX_GPIO118__FUNC_UTXD3 (MTK_PIN_NO(118) | 1) +#define PINMUX_GPIO118__FUNC_URXD3 (MTK_PIN_NO(118) | 2) +#define PINMUX_GPIO118__FUNC_MD_UTXD (MTK_PIN_NO(118) | 3) +#define PINMUX_GPIO118__FUNC_LTE_UTXD (MTK_PIN_NO(118) | 4) +#define PINMUX_GPIO118__FUNC_TDD_TXD (MTK_PIN_NO(118) | 5) + +#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define PINMUX_GPIO119__FUNC_KROW0 (MTK_PIN_NO(119) | 1) + +#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define PINMUX_GPIO120__FUNC_KROW1 (MTK_PIN_NO(120) | 1) +#define PINMUX_GPIO120__FUNC_PWM6 (MTK_PIN_NO(120) | 3) + +#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define PINMUX_GPIO121__FUNC_KROW2 (MTK_PIN_NO(121) | 1) +#define PINMUX_GPIO121__FUNC_IRDA_PDN (MTK_PIN_NO(121) | 2) +#define PINMUX_GPIO121__FUNC_I2S1_DO_1 (MTK_PIN_NO(121) | 3) +#define PINMUX_GPIO121__FUNC_USB_DRVVBUS (MTK_PIN_NO(121) | 4) +#define PINMUX_GPIO121__FUNC_SPI_CK_2 (MTK_PIN_NO(121) | 5) +#define PINMUX_GPIO121__FUNC_PWM4 (MTK_PIN_NO(121) | 6) + +#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define PINMUX_GPIO122__FUNC_KCOL0 (MTK_PIN_NO(122) | 1) + +#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define PINMUX_GPIO123__FUNC_KCOL1 (MTK_PIN_NO(123) | 1) +#define PINMUX_GPIO123__FUNC_IRDA_RXD (MTK_PIN_NO(123) | 2) +#define PINMUX_GPIO123__FUNC_I2S2_DI_2 (MTK_PIN_NO(123) | 3) +#define PINMUX_GPIO123__FUNC_PWM5 (MTK_PIN_NO(123) | 4) + +#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define PINMUX_GPIO124__FUNC_KCOL2 (MTK_PIN_NO(124) | 1) +#define PINMUX_GPIO124__FUNC_IRDA_TXD (MTK_PIN_NO(124) | 2) +#define PINMUX_GPIO124__FUNC_I2S1_DO_2 (MTK_PIN_NO(124) | 3) +#define PINMUX_GPIO124__FUNC_USB_DRVVBUS (MTK_PIN_NO(124) | 4) +#define PINMUX_GPIO124__FUNC_SPI_MI_2 (MTK_PIN_NO(124) | 5) +#define PINMUX_GPIO124__FUNC_PWM3 (MTK_PIN_NO(124) | 6) + +#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define PINMUX_GPIO125__FUNC_SDA1 (MTK_PIN_NO(125) | 1) + +#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define PINMUX_GPIO126__FUNC_SCL1 (MTK_PIN_NO(126) | 1) + +#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0) +#define PINMUX_GPIO127__FUNC_MD_EINT1 (MTK_PIN_NO(127) | 1) +#define PINMUX_GPIO127__FUNC_DISP_PWM1 (MTK_PIN_NO(127) | 2) +#define PINMUX_GPIO127__FUNC_SPI_MO_2 (MTK_PIN_NO(127) | 3) + +#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0) +#define PINMUX_GPIO128__FUNC_MD_EINT2 (MTK_PIN_NO(128) | 1) +#define PINMUX_GPIO128__FUNC_DSI1_TE (MTK_PIN_NO(128) | 2) +#define PINMUX_GPIO128__FUNC_SPI_CS_2 (MTK_PIN_NO(128) | 3) + +#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0) +#define PINMUX_GPIO129__FUNC_I2S3_WS (MTK_PIN_NO(129) | 1) +#define PINMUX_GPIO129__FUNC_I2S2_WS (MTK_PIN_NO(129) | 2) +#define PINMUX_GPIO129__FUNC_PWM0 (MTK_PIN_NO(129) | 3) + +#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0) +#define PINMUX_GPIO130__FUNC_I2S3_BCK (MTK_PIN_NO(130) | 1) +#define PINMUX_GPIO130__FUNC_I2S2_BCK (MTK_PIN_NO(130) | 2) +#define PINMUX_GPIO130__FUNC_PWM1 (MTK_PIN_NO(130) | 3) + +#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0) +#define PINMUX_GPIO131__FUNC_I2S3_MCK (MTK_PIN_NO(131) | 1) +#define PINMUX_GPIO131__FUNC_I2S2_MCK (MTK_PIN_NO(131) | 2) +#define PINMUX_GPIO131__FUNC_PWM2 (MTK_PIN_NO(131) | 3) + +#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0) +#define PINMUX_GPIO132__FUNC_I2S3_DO_1 (MTK_PIN_NO(132) | 1) +#define PINMUX_GPIO132__FUNC_I2S2_DI_1 (MTK_PIN_NO(132) | 2) +#define PINMUX_GPIO132__FUNC_PWM3 (MTK_PIN_NO(132) | 3) + +#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0) +#define PINMUX_GPIO133__FUNC_I2S3_DO_2 (MTK_PIN_NO(133) | 1) +#define PINMUX_GPIO133__FUNC_I2S2_DI_2 (MTK_PIN_NO(133) | 2) +#define PINMUX_GPIO133__FUNC_PWM4 (MTK_PIN_NO(133) | 3) + +#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0) +#define PINMUX_GPIO134__FUNC_I2S3_DO_3 (MTK_PIN_NO(134) | 1) +#define PINMUX_GPIO134__FUNC_DISP_PWM1 (MTK_PIN_NO(134) | 2) +#define PINMUX_GPIO134__FUNC_I2S1_DO_1 (MTK_PIN_NO(134) | 3) +#define PINMUX_GPIO134__FUNC_PWM5 (MTK_PIN_NO(134) | 4) + +#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0) +#define PINMUX_GPIO135__FUNC_I2S3_DO_4 (MTK_PIN_NO(135) | 1) +#define PINMUX_GPIO135__FUNC_DSI1_TE (MTK_PIN_NO(135) | 2) +#define PINMUX_GPIO135__FUNC_I2S1_DO_2 (MTK_PIN_NO(135) | 3) +#define PINMUX_GPIO135__FUNC_PWM6 (MTK_PIN_NO(135) | 4) + +#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0) +#define PINMUX_GPIO136__FUNC_SDA3 (MTK_PIN_NO(136) | 1) + +#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0) +#define PINMUX_GPIO137__FUNC_SCL3 (MTK_PIN_NO(137) | 1) + +#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0) +#define PINMUX_GPIO138__FUNC_DPI_CK (MTK_PIN_NO(138) | 1) +#define PINMUX_GPIO138__FUNC_NLD6 (MTK_PIN_NO(138) | 2) +#define PINMUX_GPIO138__FUNC_UTXD0 (MTK_PIN_NO(138) | 3) +#define PINMUX_GPIO138__FUNC_USB_DRVVBUS (MTK_PIN_NO(138) | 4) +#define PINMUX_GPIO138__FUNC_IRDA_PDN (MTK_PIN_NO(138) | 5) + +#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0) +#define PINMUX_GPIO139__FUNC_DPI_DE (MTK_PIN_NO(139) | 1) +#define PINMUX_GPIO139__FUNC_NLD7 (MTK_PIN_NO(139) | 2) +#define PINMUX_GPIO139__FUNC_URXD0 (MTK_PIN_NO(139) | 3) +#define PINMUX_GPIO139__FUNC_MD_UTXD (MTK_PIN_NO(139) | 4) +#define PINMUX_GPIO139__FUNC_IRDA_RXD (MTK_PIN_NO(139) | 5) + +#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0) +#define PINMUX_GPIO140__FUNC_DPI_D0 (MTK_PIN_NO(140) | 1) +#define PINMUX_GPIO140__FUNC_NREB (MTK_PIN_NO(140) | 2) +#define PINMUX_GPIO140__FUNC_UCTS0 (MTK_PIN_NO(140) | 3) +#define PINMUX_GPIO140__FUNC_MD_URXD (MTK_PIN_NO(140) | 4) +#define PINMUX_GPIO140__FUNC_IRDA_TXD (MTK_PIN_NO(140) | 5) + +#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0) +#define PINMUX_GPIO141__FUNC_DPI_D1 (MTK_PIN_NO(141) | 1) +#define PINMUX_GPIO141__FUNC_NRNB0 (MTK_PIN_NO(141) | 2) +#define PINMUX_GPIO141__FUNC_URTS0 (MTK_PIN_NO(141) | 3) +#define PINMUX_GPIO141__FUNC_LTE_UTXD (MTK_PIN_NO(141) | 4) +#define PINMUX_GPIO141__FUNC_I2S2_WS (MTK_PIN_NO(141) | 5) + +#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0) +#define PINMUX_GPIO142__FUNC_DPI_D2 (MTK_PIN_NO(142) | 1) +#define PINMUX_GPIO142__FUNC_NWEB (MTK_PIN_NO(142) | 2) +#define PINMUX_GPIO142__FUNC_UTXD1 (MTK_PIN_NO(142) | 3) +#define PINMUX_GPIO142__FUNC_LTE_URXD (MTK_PIN_NO(142) | 4) +#define PINMUX_GPIO142__FUNC_I2S2_BCK (MTK_PIN_NO(142) | 5) + +#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0) +#define PINMUX_GPIO143__FUNC_DPI_D3 (MTK_PIN_NO(143) | 1) +#define PINMUX_GPIO143__FUNC_NCEB0 (MTK_PIN_NO(143) | 2) +#define PINMUX_GPIO143__FUNC_URXD1 (MTK_PIN_NO(143) | 3) +#define PINMUX_GPIO143__FUNC_TDD_TXD (MTK_PIN_NO(143) | 4) +#define PINMUX_GPIO143__FUNC_I2S2_MCK (MTK_PIN_NO(143) | 5) + +#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0) +#define PINMUX_GPIO144__FUNC_DPI_D4 (MTK_PIN_NO(144) | 1) +#define PINMUX_GPIO144__FUNC_NALE (MTK_PIN_NO(144) | 2) +#define PINMUX_GPIO144__FUNC_UCTS1 (MTK_PIN_NO(144) | 3) +#define PINMUX_GPIO144__FUNC_TDD_TMS (MTK_PIN_NO(144) | 4) +#define PINMUX_GPIO144__FUNC_I2S2_DI_1 (MTK_PIN_NO(144) | 5) + +#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0) +#define PINMUX_GPIO145__FUNC_DPI_D5 (MTK_PIN_NO(145) | 1) +#define PINMUX_GPIO145__FUNC_NCLE (MTK_PIN_NO(145) | 2) +#define PINMUX_GPIO145__FUNC_URTS1 (MTK_PIN_NO(145) | 3) +#define PINMUX_GPIO145__FUNC_TDD_TCK (MTK_PIN_NO(145) | 4) +#define PINMUX_GPIO145__FUNC_I2S2_DI_2 (MTK_PIN_NO(145) | 5) + +#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0) +#define PINMUX_GPIO146__FUNC_DPI_D6 (MTK_PIN_NO(146) | 1) +#define PINMUX_GPIO146__FUNC_NLD8 (MTK_PIN_NO(146) | 2) +#define PINMUX_GPIO146__FUNC_UTXD2 (MTK_PIN_NO(146) | 3) +#define PINMUX_GPIO146__FUNC_TDD_TDI (MTK_PIN_NO(146) | 4) + +#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0) +#define PINMUX_GPIO147__FUNC_DPI_D7 (MTK_PIN_NO(147) | 1) +#define PINMUX_GPIO147__FUNC_NLD9 (MTK_PIN_NO(147) | 2) +#define PINMUX_GPIO147__FUNC_URXD2 (MTK_PIN_NO(147) | 3) +#define PINMUX_GPIO147__FUNC_TDD_TDO (MTK_PIN_NO(147) | 4) +#define PINMUX_GPIO147__FUNC_I2S1_WS (MTK_PIN_NO(147) | 5) + +#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0) +#define PINMUX_GPIO148__FUNC_DPI_D8 (MTK_PIN_NO(148) | 1) +#define PINMUX_GPIO148__FUNC_NLD10 (MTK_PIN_NO(148) | 2) +#define PINMUX_GPIO148__FUNC_UCTS2 (MTK_PIN_NO(148) | 3) +#define PINMUX_GPIO148__FUNC_TDD_TRSTN (MTK_PIN_NO(148) | 4) +#define PINMUX_GPIO148__FUNC_I2S1_BCK (MTK_PIN_NO(148) | 5) + +#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0) +#define PINMUX_GPIO149__FUNC_DPI_D9 (MTK_PIN_NO(149) | 1) +#define PINMUX_GPIO149__FUNC_NLD11 (MTK_PIN_NO(149) | 2) +#define PINMUX_GPIO149__FUNC_URTS2 (MTK_PIN_NO(149) | 3) +#define PINMUX_GPIO149__FUNC_LTE_MD32_JTAG_TMS (MTK_PIN_NO(149) | 4) +#define PINMUX_GPIO149__FUNC_I2S1_MCK (MTK_PIN_NO(149) | 5) + +#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0) +#define PINMUX_GPIO150__FUNC_DPI_D10 (MTK_PIN_NO(150) | 1) +#define PINMUX_GPIO150__FUNC_NLD12 (MTK_PIN_NO(150) | 2) +#define PINMUX_GPIO150__FUNC_UTXD3 (MTK_PIN_NO(150) | 3) +#define PINMUX_GPIO150__FUNC_LTE_MD32_JTAG_TCK (MTK_PIN_NO(150) | 4) +#define PINMUX_GPIO150__FUNC_I2S1_DO_1 (MTK_PIN_NO(150) | 5) + +#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0) +#define PINMUX_GPIO151__FUNC_DPI_D11 (MTK_PIN_NO(151) | 1) +#define PINMUX_GPIO151__FUNC_NLD13 (MTK_PIN_NO(151) | 2) +#define PINMUX_GPIO151__FUNC_URXD3 (MTK_PIN_NO(151) | 3) +#define PINMUX_GPIO151__FUNC_LTE_MD32_JTAG_TDI (MTK_PIN_NO(151) | 4) +#define PINMUX_GPIO151__FUNC_I2S1_DO_2 (MTK_PIN_NO(151) | 5) + +#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0) +#define PINMUX_GPIO152__FUNC_DPI_HSYNC (MTK_PIN_NO(152) | 1) +#define PINMUX_GPIO152__FUNC_NLD14 (MTK_PIN_NO(152) | 2) +#define PINMUX_GPIO152__FUNC_UCTS3 (MTK_PIN_NO(152) | 3) +#define PINMUX_GPIO152__FUNC_LTE_MD32_JTAG_TDO (MTK_PIN_NO(152) | 4) +#define PINMUX_GPIO152__FUNC_DSI1_TE (MTK_PIN_NO(152) | 5) + +#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0) +#define PINMUX_GPIO153__FUNC_DPI_VSYNC (MTK_PIN_NO(153) | 1) +#define PINMUX_GPIO153__FUNC_NLD15 (MTK_PIN_NO(153) | 2) +#define PINMUX_GPIO153__FUNC_URTS3 (MTK_PIN_NO(153) | 3) +#define PINMUX_GPIO153__FUNC_LTE_MD32_JTAG_TRST (MTK_PIN_NO(153) | 4) +#define PINMUX_GPIO153__FUNC_DISP_PWM1 (MTK_PIN_NO(153) | 5) + +#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0) +#define PINMUX_GPIO154__FUNC_MSDC0_DAT0 (MTK_PIN_NO(154) | 1) +#define PINMUX_GPIO154__FUNC_NLD8 (MTK_PIN_NO(154) | 2) + +#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0) +#define PINMUX_GPIO155__FUNC_MSDC0_DAT1 (MTK_PIN_NO(155) | 1) +#define PINMUX_GPIO155__FUNC_NLD9 (MTK_PIN_NO(155) | 2) + +#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0) +#define PINMUX_GPIO156__FUNC_MSDC0_DAT2 (MTK_PIN_NO(156) | 1) +#define PINMUX_GPIO156__FUNC_NLD10 (MTK_PIN_NO(156) | 2) + +#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0) +#define PINMUX_GPIO157__FUNC_MSDC0_DAT3 (MTK_PIN_NO(157) | 1) +#define PINMUX_GPIO157__FUNC_NLD11 (MTK_PIN_NO(157) | 2) + +#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0) +#define PINMUX_GPIO158__FUNC_MSDC0_DAT4 (MTK_PIN_NO(158) | 1) +#define PINMUX_GPIO158__FUNC_NLD12 (MTK_PIN_NO(158) | 2) + +#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0) +#define PINMUX_GPIO159__FUNC_MSDC0_DAT5 (MTK_PIN_NO(159) | 1) +#define PINMUX_GPIO159__FUNC_NLD13 (MTK_PIN_NO(159) | 2) + +#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0) +#define PINMUX_GPIO160__FUNC_MSDC0_DAT6 (MTK_PIN_NO(160) | 1) +#define PINMUX_GPIO160__FUNC_NLD14 (MTK_PIN_NO(160) | 2) + +#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0) +#define PINMUX_GPIO161__FUNC_MSDC0_DAT7 (MTK_PIN_NO(161) | 1) +#define PINMUX_GPIO161__FUNC_NLD15 (MTK_PIN_NO(161) | 2) + +#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0) +#define PINMUX_GPIO162__FUNC_MSDC0_CMD (MTK_PIN_NO(162) | 1) + +#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0) +#define PINMUX_GPIO163__FUNC_MSDC0_CLK (MTK_PIN_NO(163) | 1) + +#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0) +#define PINMUX_GPIO164__FUNC_MSDC0_DSL (MTK_PIN_NO(164) | 1) + +#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0) +#define PINMUX_GPIO165__FUNC_MSDC0_RSTB (MTK_PIN_NO(165) | 1) + +#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0) +#define PINMUX_GPIO166__FUNC_SPI_CK_0 (MTK_PIN_NO(166) | 1) +#define PINMUX_GPIO166__FUNC_PWM0 (MTK_PIN_NO(166) | 3) + +#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0) +#define PINMUX_GPIO167__FUNC_SPI_MI_0 (MTK_PIN_NO(167) | 1) +#define PINMUX_GPIO167__FUNC_PWM1 (MTK_PIN_NO(167) | 3) +#define PINMUX_GPIO167__FUNC_SPI_MO_0 (MTK_PIN_NO(167) | 4) + +#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0) +#define PINMUX_GPIO168__FUNC_SPI_MO_0 (MTK_PIN_NO(168) | 1) +#define PINMUX_GPIO168__FUNC_MD_EINT3 (MTK_PIN_NO(168) | 2) +#define PINMUX_GPIO168__FUNC_PWM2 (MTK_PIN_NO(168) | 3) +#define PINMUX_GPIO168__FUNC_SPI_MI_0 (MTK_PIN_NO(168) | 4) + +#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0) +#define PINMUX_GPIO169__FUNC_SPI_CS_0 (MTK_PIN_NO(169) | 1) +#define PINMUX_GPIO169__FUNC_MD_EINT4 (MTK_PIN_NO(169) | 2) +#define PINMUX_GPIO169__FUNC_PWM3 (MTK_PIN_NO(169) | 3) + +#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0) +#define PINMUX_GPIO170__FUNC_MSDC1_CMD (MTK_PIN_NO(170) | 1) + +#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0) +#define PINMUX_GPIO171__FUNC_MSDC1_DAT0 (MTK_PIN_NO(171) | 1) + +#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0) +#define PINMUX_GPIO172__FUNC_MSDC1_DAT1 (MTK_PIN_NO(172) | 1) + +#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0) +#define PINMUX_GPIO173__FUNC_MSDC1_DAT2 (MTK_PIN_NO(173) | 1) + +#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0) +#define PINMUX_GPIO174__FUNC_MSDC1_DAT3 (MTK_PIN_NO(174) | 1) + +#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0) +#define PINMUX_GPIO175__FUNC_MSDC1_CLK (MTK_PIN_NO(175) | 1) + +#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0) +#define PINMUX_GPIO176__FUNC_PWRAP_SPIMI (MTK_PIN_NO(176) | 1) +#define PINMUX_GPIO176__FUNC_PWRAP_SPIMO (MTK_PIN_NO(176) | 2) + +#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0) +#define PINMUX_GPIO177__FUNC_PWRAP_SPIMO (MTK_PIN_NO(177) | 1) +#define PINMUX_GPIO177__FUNC_PWRAP_SPIMI (MTK_PIN_NO(177) | 2) + +#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0) +#define PINMUX_GPIO178__FUNC_PWRAP_SPICK (MTK_PIN_NO(178) | 1) + +#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0) +#define PINMUX_GPIO179__FUNC_PWRAP_SPICS (MTK_PIN_NO(179) | 1) + +#define PINMUX_GPIO180__FUNC_GPIO180 (MTK_PIN_NO(180) | 0) +#define PINMUX_GPIO180__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(180) | 1) +#define PINMUX_GPIO180__FUNC_I2S1_WS (MTK_PIN_NO(180) | 2) +#define PINMUX_GPIO180__FUNC_I2S2_WS (MTK_PIN_NO(180) | 3) +#define PINMUX_GPIO180__FUNC_I2S0_WS (MTK_PIN_NO(180) | 4) + +#define PINMUX_GPIO181__FUNC_GPIO181 (MTK_PIN_NO(181) | 0) +#define PINMUX_GPIO181__FUNC_AUD_DAT_MISO_1 (MTK_PIN_NO(181) | 1) +#define PINMUX_GPIO181__FUNC_I2S1_BCK (MTK_PIN_NO(181) | 2) +#define PINMUX_GPIO181__FUNC_I2S2_BCK (MTK_PIN_NO(181) | 3) +#define PINMUX_GPIO181__FUNC_I2S0_BCK (MTK_PIN_NO(181) | 4) + +#define PINMUX_GPIO182__FUNC_GPIO182 (MTK_PIN_NO(182) | 0) +#define PINMUX_GPIO182__FUNC_AUD_DAT_MOSI_1 (MTK_PIN_NO(182) | 1) +#define PINMUX_GPIO182__FUNC_I2S1_MCK (MTK_PIN_NO(182) | 2) +#define PINMUX_GPIO182__FUNC_I2S2_MCK (MTK_PIN_NO(182) | 3) +#define PINMUX_GPIO182__FUNC_I2S0_MCK (MTK_PIN_NO(182) | 4) + +#define PINMUX_GPIO183__FUNC_GPIO183 (MTK_PIN_NO(183) | 0) +#define PINMUX_GPIO183__FUNC_AUD_DAT_MISO_2 (MTK_PIN_NO(183) | 1) +#define PINMUX_GPIO183__FUNC_I2S1_DO_1 (MTK_PIN_NO(183) | 2) +#define PINMUX_GPIO183__FUNC_I2S2_DI_1 (MTK_PIN_NO(183) | 3) +#define PINMUX_GPIO183__FUNC_I2S0_DO (MTK_PIN_NO(183) | 4) + +#define PINMUX_GPIO184__FUNC_GPIO184 (MTK_PIN_NO(184) | 0) +#define PINMUX_GPIO184__FUNC_AUD_DAT_MOSI_2 (MTK_PIN_NO(184) | 1) +#define PINMUX_GPIO184__FUNC_I2S1_DO_2 (MTK_PIN_NO(184) | 2) +#define PINMUX_GPIO184__FUNC_I2S2_DI_2 (MTK_PIN_NO(184) | 3) +#define PINMUX_GPIO184__FUNC_I2S0_DI (MTK_PIN_NO(184) | 4) + +#define PINMUX_GPIO185__FUNC_GPIO185 (MTK_PIN_NO(185) | 0) +#define PINMUX_GPIO185__FUNC_RTC32K_CK (MTK_PIN_NO(185) | 1) + +#define PINMUX_GPIO186__FUNC_GPIO186 (MTK_PIN_NO(186) | 0) +#define PINMUX_GPIO186__FUNC_DISP_PWM0 (MTK_PIN_NO(186) | 1) +#define PINMUX_GPIO186__FUNC_DISP_PWM1 (MTK_PIN_NO(186) | 2) + +#define PINMUX_GPIO187__FUNC_GPIO187 (MTK_PIN_NO(187) | 0) +#define PINMUX_GPIO187__FUNC_SRCLKENAI (MTK_PIN_NO(187) | 1) + +#define PINMUX_GPIO188__FUNC_GPIO188 (MTK_PIN_NO(188) | 0) +#define PINMUX_GPIO188__FUNC_SRCLKENAI2 (MTK_PIN_NO(188) | 1) + +#define PINMUX_GPIO189__FUNC_GPIO189 (MTK_PIN_NO(189) | 0) +#define PINMUX_GPIO189__FUNC_SRCLKENA0 (MTK_PIN_NO(189) | 1) + +#define PINMUX_GPIO190__FUNC_GPIO190 (MTK_PIN_NO(190) | 0) +#define PINMUX_GPIO190__FUNC_SRCLKENA1 (MTK_PIN_NO(190) | 1) + +#define PINMUX_GPIO191__FUNC_GPIO191 (MTK_PIN_NO(191) | 0) +#define PINMUX_GPIO191__FUNC_WATCHDOG_AO (MTK_PIN_NO(191) | 1) + +#define PINMUX_GPIO192__FUNC_GPIO192 (MTK_PIN_NO(192) | 0) +#define PINMUX_GPIO192__FUNC_I2S0_WS (MTK_PIN_NO(192) | 1) +#define PINMUX_GPIO192__FUNC_I2S1_WS (MTK_PIN_NO(192) | 2) +#define PINMUX_GPIO192__FUNC_I2S2_WS (MTK_PIN_NO(192) | 3) +#define PINMUX_GPIO192__FUNC_NCEB1 (MTK_PIN_NO(192) | 4) + +#define PINMUX_GPIO193__FUNC_GPIO193 (MTK_PIN_NO(193) | 0) +#define PINMUX_GPIO193__FUNC_I2S0_BCK (MTK_PIN_NO(193) | 1) +#define PINMUX_GPIO193__FUNC_I2S1_BCK (MTK_PIN_NO(193) | 2) +#define PINMUX_GPIO193__FUNC_I2S2_BCK (MTK_PIN_NO(193) | 3) +#define PINMUX_GPIO193__FUNC_NRNB1 (MTK_PIN_NO(193) | 4) + +#define PINMUX_GPIO194__FUNC_GPIO194 (MTK_PIN_NO(194) | 0) +#define PINMUX_GPIO194__FUNC_I2S0_MCK (MTK_PIN_NO(194) | 1) +#define PINMUX_GPIO194__FUNC_I2S1_MCK (MTK_PIN_NO(194) | 2) +#define PINMUX_GPIO194__FUNC_I2S2_MCK (MTK_PIN_NO(194) | 3) + +#define PINMUX_GPIO195__FUNC_GPIO195 (MTK_PIN_NO(195) | 0) +#define PINMUX_GPIO195__FUNC_I2S0_DO (MTK_PIN_NO(195) | 1) +#define PINMUX_GPIO195__FUNC_I2S1_DO_1 (MTK_PIN_NO(195) | 2) +#define PINMUX_GPIO195__FUNC_I2S2_DI_1 (MTK_PIN_NO(195) | 3) + +#define PINMUX_GPIO196__FUNC_GPIO196 (MTK_PIN_NO(196) | 0) +#define PINMUX_GPIO196__FUNC_I2S0_DI (MTK_PIN_NO(196) | 1) +#define PINMUX_GPIO196__FUNC_I2S1_DO_2 (MTK_PIN_NO(196) | 2) +#define PINMUX_GPIO196__FUNC_I2S2_DI_2 (MTK_PIN_NO(196) | 3) + + +#endif diff --git a/dts/include/dt-bindings/power/imx8mp-power.h b/dts/include/dt-bindings/power/imx8mp-power.h index 9f90c40a2c..7789bcca32 100644 --- a/dts/include/dt-bindings/power/imx8mp-power.h +++ b/dts/include/dt-bindings/power/imx8mp-power.h @@ -32,4 +32,22 @@ #define IMX8MP_HSIOBLK_PD_PCIE 3 #define IMX8MP_HSIOBLK_PD_PCIE_PHY 4 +#define IMX8MP_MEDIABLK_PD_MIPI_DSI_1 0 +#define IMX8MP_MEDIABLK_PD_MIPI_CSI2_1 1 +#define IMX8MP_MEDIABLK_PD_LCDIF_1 2 +#define IMX8MP_MEDIABLK_PD_ISI 3 +#define IMX8MP_MEDIABLK_PD_MIPI_CSI2_2 4 +#define IMX8MP_MEDIABLK_PD_LCDIF_2 5 +#define IMX8MP_MEDIABLK_PD_ISP 6 +#define IMX8MP_MEDIABLK_PD_DWE 7 +#define IMX8MP_MEDIABLK_PD_MIPI_DSI_2 8 + +#define IMX8MP_HDMIBLK_PD_IRQSTEER 0 +#define IMX8MP_HDMIBLK_PD_LCDIF 1 +#define IMX8MP_HDMIBLK_PD_PAI 2 +#define IMX8MP_HDMIBLK_PD_PVI 3 +#define IMX8MP_HDMIBLK_PD_TRNG 4 +#define IMX8MP_HDMIBLK_PD_HDMI_TX 5 +#define IMX8MP_HDMIBLK_PD_HDMI_TX_PHY 6 + #endif diff --git a/dts/include/dt-bindings/power/qcom-rpmpd.h b/dts/include/dt-bindings/power/qcom-rpmpd.h index c002cc6ddf..6cce5b7aa9 100644 --- a/dts/include/dt-bindings/power/qcom-rpmpd.h +++ b/dts/include/dt-bindings/power/qcom-rpmpd.h @@ -20,6 +20,14 @@ #define SDX55_MX 1 #define SDX55_CX 2 +/* SDX65 Power Domain Indexes */ +#define SDX65_MSS 0 +#define SDX65_MX 1 +#define SDX65_MX_AO 2 +#define SDX65_CX 3 +#define SDX65_CX_AO 4 +#define SDX65_MXC 5 + /* SM6350 Power Domain Indexes */ #define SM6350_CX 0 #define SM6350_GFX 1 @@ -117,6 +125,24 @@ #define SC8180X_MX 9 #define SC8180X_MX_AO 10 +/* SC8280XP Power Domain Indexes */ +#define SC8280XP_CX 0 +#define SC8280XP_CX_AO 1 +#define SC8280XP_DDR 2 +#define SC8280XP_EBI 3 +#define SC8280XP_GFX 4 +#define SC8280XP_LCX 5 +#define SC8280XP_LMX 6 +#define SC8280XP_MMCX 7 +#define SC8280XP_MMCX_AO 8 +#define SC8280XP_MSS 9 +#define SC8280XP_MX 10 +#define SC8280XP_MXC 12 +#define SC8280XP_MX_AO 11 +#define SC8280XP_NSP 13 +#define SC8280XP_QPHY 14 +#define SC8280XP_XO 15 + /* SDM845 Power Domain performance levels */ #define RPMH_REGULATOR_LEVEL_RETENTION 16 #define RPMH_REGULATOR_LEVEL_MIN_SVS 48 diff --git a/dts/include/dt-bindings/power/r8a779g0-sysc.h b/dts/include/dt-bindings/power/r8a779g0-sysc.h new file mode 100644 index 0000000000..7daa70f181 --- /dev/null +++ b/dts/include/dt-bindings/power/r8a779g0-sysc.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (C) 2022 Renesas Electronics Corp. + */ +#ifndef __DT_BINDINGS_POWER_R8A779G0_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A779G0_SYSC_H__ + +/* + * These power domain indices match the Power Domain Register Numbers (PDR) + */ + +#define R8A779G0_PD_A1E0D0C0 0 +#define R8A779G0_PD_A1E0D0C1 1 +#define R8A779G0_PD_A1E0D1C0 2 +#define R8A779G0_PD_A1E0D1C1 3 +#define R8A779G0_PD_A2E0D0 16 +#define R8A779G0_PD_A2E0D1 17 +#define R8A779G0_PD_A3E0 20 +#define R8A779G0_PD_A33DGA 24 +#define R8A779G0_PD_A23DGB 25 +#define R8A779G0_PD_A1DSP0 33 +#define R8A779G0_PD_A2IMP01 34 +#define R8A779G0_PD_A2PSC 35 +#define R8A779G0_PD_A2CV0 36 +#define R8A779G0_PD_A2CV1 37 +#define R8A779G0_PD_A1CNN0 41 +#define R8A779G0_PD_A2CN0 42 +#define R8A779G0_PD_A3IR 43 +#define R8A779G0_PD_A1DSP1 45 +#define R8A779G0_PD_A2IMP23 46 +#define R8A779G0_PD_A2DMA 47 +#define R8A779G0_PD_A2CV2 48 +#define R8A779G0_PD_A2CV3 49 +#define R8A779G0_PD_A1DSP2 53 +#define R8A779G0_PD_A1DSP3 54 +#define R8A779G0_PD_A3VIP0 56 +#define R8A779G0_PD_A3VIP1 57 +#define R8A779G0_PD_A3VIP2 58 +#define R8A779G0_PD_A3ISP0 60 +#define R8A779G0_PD_A3ISP1 61 + +/* Always-on power area */ +#define R8A779G0_PD_ALWAYS_ON 64 + +#endif /* __DT_BINDINGS_POWER_R8A779G0_SYSC_H__*/ diff --git a/dts/include/dt-bindings/reset/amlogic,meson-s4-reset.h b/dts/include/dt-bindings/reset/amlogic,meson-s4-reset.h new file mode 100644 index 0000000000..eab428eb8a --- /dev/null +++ b/dts/include/dt-bindings/reset/amlogic,meson-s4-reset.h @@ -0,0 +1,125 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + * Author: Zelong Dong + * + */ + +#ifndef _DT_BINDINGS_AMLOGIC_MESON_S4_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON_S4_RESET_H + +/* RESET0 */ +#define RESET_USB_DDR0 0 +#define RESET_USB_DDR1 1 +#define RESET_USB_DDR2 2 +#define RESET_USB_DDR3 3 +#define RESET_USBCTRL 4 +/* 5-7 */ +#define RESET_USBPHY20 8 +#define RESET_USBPHY21 9 +/* 10-15 */ +#define RESET_HDMITX_APB 16 +#define RESET_BRG_VCBUS_DEC 17 +#define RESET_VCBUS 18 +#define RESET_VID_PLL_DIV 19 +#define RESET_VDI6 20 +#define RESET_GE2D 21 +#define RESET_HDMITXPHY 22 +#define RESET_VID_LOCK 23 +#define RESET_VENCL 24 +#define RESET_VDAC 25 +#define RESET_VENCP 26 +#define RESET_VENCI 27 +#define RESET_RDMA 28 +#define RESET_HDMI_TX 29 +#define RESET_VIU 30 +#define RESET_VENC 31 + +/* RESET1 */ +#define RESET_AUDIO 32 +#define RESET_MALI_APB 33 +#define RESET_MALI 34 +#define RESET_DDR_APB 35 +#define RESET_DDR 36 +#define RESET_DOS_APB 37 +#define RESET_DOS 38 +/* 39-47 */ +#define RESET_ETH 48 +/* 49-51 */ +#define RESET_DEMOD 52 +/* 53-63 */ + +/* RESET2 */ +#define RESET_ABUS_ARB 64 +#define RESET_IR_CTRL 65 +#define RESET_TEMPSENSOR_DDR 66 +#define RESET_TEMPSENSOR_PLL 67 +/* 68-71 */ +#define RESET_SMART_CARD 72 +#define RESET_SPICC0 73 +/* 74 */ +#define RESET_RSA 75 +/* 76-79 */ +#define RESET_MSR_CLK 80 +#define RESET_SPIFC 81 +#define RESET_SARADC 82 +/* 83-87 */ +#define RESET_ACODEC 88 +#define RESET_CEC 89 +#define RESET_AFIFO 90 +#define RESET_WATCHDOG 91 +/* 92-95 */ + +/* RESET3 */ +/* 96-127 */ + +/* RESET4 */ +/* 128-131 */ +#define RESET_PWM_AB 132 +#define RESET_PWM_CD 133 +#define RESET_PWM_EF 134 +#define RESET_PWM_GH 135 +#define RESET_PWM_IJ 136 +/* 137 */ +#define RESET_UART_A 138 +#define RESET_UART_B 139 +#define RESET_UART_C 140 +#define RESET_UART_D 141 +#define RESET_UART_E 142 +/* 143 */ +#define RESET_I2C_S_A 144 +#define RESET_I2C_M_A 145 +#define RESET_I2C_M_B 146 +#define RESET_I2C_M_C 147 +#define RESET_I2C_M_D 148 +#define RESET_I2C_M_E 149 +/* 150-151 */ +#define RESET_SD_EMMC_A 152 +#define RESET_SD_EMMC_B 153 +#define RESET_NAND_EMMC 154 +/* 155-159 */ + +/* RESET5 */ +#define RESET_BRG_VDEC_PIPL0 160 +#define RESET_BRG_HEVCF_PIPL0 161 +/* 162 */ +#define RESET_BRG_HCODEC_PIPL0 163 +#define RESET_BRG_GE2D_PIPL0 164 +#define RESET_BRG_VPU_PIPL0 165 +#define RESET_BRG_CPU_PIPL0 166 +#define RESET_BRG_MALI_PIPL0 167 +/* 168 */ +#define RESET_BRG_MALI_PIPL1 169 +/* 170-171 */ +#define RESET_BRG_HEVCF_PIPL1 172 +#define RESET_BRG_HEVCB_PIPL1 173 +/* 174-183 */ +#define RESET_RAMA 184 +/* 185-186 */ +#define RESET_BRG_NIC_VAPB 187 +#define RESET_BRG_NIC_DSU 188 +#define RESET_BRG_NIC_SYSCLK 189 +#define RESET_BRG_NIC_MAIN 190 +#define RESET_BRG_NIC_ALL 191 + +#endif diff --git a/dts/include/dt-bindings/reset/mt7986-resets.h b/dts/include/dt-bindings/reset/mt7986-resets.h new file mode 100644 index 0000000000..af3d16c811 --- /dev/null +++ b/dts/include/dt-bindings/reset/mt7986-resets.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih + */ + +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7986 +#define _DT_BINDINGS_RESET_CONTROLLER_MT7986 + +/* INFRACFG resets */ +#define MT7986_INFRACFG_PEXTP_MAC_SW_RST 6 +#define MT7986_INFRACFG_SSUSB_SW_RST 7 +#define MT7986_INFRACFG_EIP97_SW_RST 8 +#define MT7986_INFRACFG_AUDIO_SW_RST 13 +#define MT7986_INFRACFG_CQ_DMA_SW_RST 14 + +#define MT7986_INFRACFG_TRNG_SW_RST 17 +#define MT7986_INFRACFG_AP_DMA_SW_RST 32 +#define MT7986_INFRACFG_I2C_SW_RST 33 +#define MT7986_INFRACFG_NFI_SW_RST 34 +#define MT7986_INFRACFG_SPI0_SW_RST 35 +#define MT7986_INFRACFG_SPI1_SW_RST 36 +#define MT7986_INFRACFG_UART0_SW_RST 37 +#define MT7986_INFRACFG_UART1_SW_RST 38 +#define MT7986_INFRACFG_UART2_SW_RST 39 +#define MT7986_INFRACFG_AUXADC_SW_RST 43 + +#define MT7986_INFRACFG_APXGPT_SW_RST 66 +#define MT7986_INFRACFG_PWM_SW_RST 68 + +#define MT7986_INFRACFG_SW_RST_NUM 69 + +/* TOPRGU resets */ +#define MT7986_TOPRGU_APMIXEDSYS_SW_RST 0 +#define MT7986_TOPRGU_SGMII0_SW_RST 1 +#define MT7986_TOPRGU_SGMII1_SW_RST 2 +#define MT7986_TOPRGU_INFRA_SW_RST 3 +#define MT7986_TOPRGU_U2PHY_SW_RST 5 +#define MT7986_TOPRGU_PCIE_SW_RST 6 +#define MT7986_TOPRGU_SSUSB_SW_RST 7 +#define MT7986_TOPRGU_ETHDMA_SW_RST 20 +#define MT7986_TOPRGU_CONSYS_SW_RST 23 + +#define MT7986_TOPRGU_SW_RST_NUM 24 + +/* ETHSYS Subsystem resets */ +#define MT7986_ETHSYS_FE_SW_RST 6 +#define MT7986_ETHSYS_PMTR_SW_RST 8 +#define MT7986_ETHSYS_GMAC_SW_RST 23 +#define MT7986_ETHSYS_PPE0_SW_RST 30 +#define MT7986_ETHSYS_PPE1_SW_RST 31 + +#define MT7986_ETHSYS_SW_RST_NUM 32 + +#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT7986 */ diff --git a/dts/include/dt-bindings/reset/mt8186-resets.h b/dts/include/dt-bindings/reset/mt8186-resets.h new file mode 100644 index 0000000000..5f850370c4 --- /dev/null +++ b/dts/include/dt-bindings/reset/mt8186-resets.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Runyang Chen + */ + +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8186 +#define _DT_BINDINGS_RESET_CONTROLLER_MT8186 + +#define MT8186_TOPRGU_INFRA_SW_RST 0 +#define MT8186_TOPRGU_MM_SW_RST 1 +#define MT8186_TOPRGU_MFG_SW_RST 2 +#define MT8186_TOPRGU_VENC_SW_RST 3 +#define MT8186_TOPRGU_VDEC_SW_RST 4 +#define MT8186_TOPRGU_IMG_SW_RST 5 +#define MT8186_TOPRGU_DDR_SW_RST 6 +#define MT8186_TOPRGU_INFRA_AO_SW_RST 8 +#define MT8186_TOPRGU_CONNSYS_SW_RST 9 +#define MT8186_TOPRGU_APMIXED_SW_RST 10 +#define MT8186_TOPRGU_PWRAP_SW_RST 11 +#define MT8186_TOPRGU_CONN_MCU_SW_RST 12 +#define MT8186_TOPRGU_IPNNA_SW_RST 13 +#define MT8186_TOPRGU_WPE_SW_RST 14 +#define MT8186_TOPRGU_ADSP_SW_RST 15 +#define MT8186_TOPRGU_AUDIO_SW_RST 17 +#define MT8186_TOPRGU_CAM_MAIN_SW_RST 18 +#define MT8186_TOPRGU_CAM_RAWA_SW_RST 19 +#define MT8186_TOPRGU_CAM_RAWB_SW_RST 20 +#define MT8186_TOPRGU_IPE_SW_RST 21 +#define MT8186_TOPRGU_IMG2_SW_RST 22 +#define MT8186_TOPRGU_SW_RST_NUM 23 + +/* MMSYS resets */ +#define MT8186_MMSYS_SW0_RST_B_DISP_DSI0 19 + +#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8186 */ diff --git a/dts/include/dt-bindings/reset/mt8192-resets.h b/dts/include/dt-bindings/reset/mt8192-resets.h index be9a7ca245..764ca9910f 100644 --- a/dts/include/dt-bindings/reset/mt8192-resets.h +++ b/dts/include/dt-bindings/reset/mt8192-resets.h @@ -27,4 +27,7 @@ #define MT8192_TOPRGU_SW_RST_NUM 23 +/* MMSYS resets */ +#define MT8192_MMSYS_SW0_RST_B_DISP_DSI0 15 + #endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8192 */ diff --git a/dts/include/dt-bindings/reset/stm32mp1-resets.h b/dts/include/dt-bindings/reset/stm32mp1-resets.h index f3a0ed3178..4ffa7c3612 100644 --- a/dts/include/dt-bindings/reset/stm32mp1-resets.h +++ b/dts/include/dt-bindings/reset/stm32mp1-resets.h @@ -107,17 +107,17 @@ #define GPIOK_R 19786 /* SCMI reset domain identifiers */ -#define RST_SCMI0_SPI6 0 -#define RST_SCMI0_I2C4 1 -#define RST_SCMI0_I2C6 2 -#define RST_SCMI0_USART1 3 -#define RST_SCMI0_STGEN 4 -#define RST_SCMI0_GPIOZ 5 -#define RST_SCMI0_CRYP1 6 -#define RST_SCMI0_HASH1 7 -#define RST_SCMI0_RNG1 8 -#define RST_SCMI0_MDMA 9 -#define RST_SCMI0_MCU 10 -#define RST_SCMI0_MCU_HOLD_BOOT 11 +#define RST_SCMI_SPI6 0 +#define RST_SCMI_I2C4 1 +#define RST_SCMI_I2C6 2 +#define RST_SCMI_USART1 3 +#define RST_SCMI_STGEN 4 +#define RST_SCMI_GPIOZ 5 +#define RST_SCMI_CRYP1 6 +#define RST_SCMI_HASH1 7 +#define RST_SCMI_RNG1 8 +#define RST_SCMI_MDMA 9 +#define RST_SCMI_MCU 10 +#define RST_SCMI_MCU_HOLD_BOOT 11 #endif /* _DT_BINDINGS_STM32MP1_RESET_H_ */ diff --git a/dts/include/dt-bindings/reset/stm32mp13-resets.h b/dts/include/dt-bindings/reset/stm32mp13-resets.h new file mode 100644 index 0000000000..934864e90d --- /dev/null +++ b/dts/include/dt-bindings/reset/stm32mp13-resets.h @@ -0,0 +1,100 @@ +/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */ +/* + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved + * Author: Gabriel Fernandez for STMicroelectronics. + */ + +#ifndef _DT_BINDINGS_STM32MP13_RESET_H_ +#define _DT_BINDINGS_STM32MP13_RESET_H_ + +#define TIM2_R 13568 +#define TIM3_R 13569 +#define TIM4_R 13570 +#define TIM5_R 13571 +#define TIM6_R 13572 +#define TIM7_R 13573 +#define LPTIM1_R 13577 +#define SPI2_R 13579 +#define SPI3_R 13580 +#define USART3_R 13583 +#define UART4_R 13584 +#define UART5_R 13585 +#define UART7_R 13586 +#define UART8_R 13587 +#define I2C1_R 13589 +#define I2C2_R 13590 +#define SPDIF_R 13594 +#define TIM1_R 13632 +#define TIM8_R 13633 +#define SPI1_R 13640 +#define USART6_R 13645 +#define SAI1_R 13648 +#define SAI2_R 13649 +#define DFSDM_R 13652 +#define FDCAN_R 13656 +#define LPTIM2_R 13696 +#define LPTIM3_R 13697 +#define LPTIM4_R 13698 +#define LPTIM5_R 13699 +#define SYSCFG_R 13707 +#define VREF_R 13709 +#define DTS_R 13712 +#define PMBCTRL_R 13713 +#define LTDC_R 13760 +#define DCMIPP_R 13761 +#define DDRPERFM_R 13768 +#define USBPHY_R 13776 +#define STGEN_R 13844 +#define USART1_R 13888 +#define USART2_R 13889 +#define SPI4_R 13890 +#define SPI5_R 13891 +#define I2C3_R 13892 +#define I2C4_R 13893 +#define I2C5_R 13894 +#define TIM12_R 13895 +#define TIM13_R 13896 +#define TIM14_R 13897 +#define TIM15_R 13898 +#define TIM16_R 13899 +#define TIM17_R 13900 +#define DMA1_R 13952 +#define DMA2_R 13953 +#define DMAMUX1_R 13954 +#define DMA3_R 13955 +#define DMAMUX2_R 13956 +#define ADC1_R 13957 +#define ADC2_R 13958 +#define USBO_R 13960 +#define GPIOA_R 14080 +#define GPIOB_R 14081 +#define GPIOC_R 14082 +#define GPIOD_R 14083 +#define GPIOE_R 14084 +#define GPIOF_R 14085 +#define GPIOG_R 14086 +#define GPIOH_R 14087 +#define GPIOI_R 14088 +#define TSC_R 14095 +#define PKA_R 14146 +#define SAES_R 14147 +#define CRYP1_R 14148 +#define HASH1_R 14149 +#define RNG1_R 14150 +#define AXIMC_R 14160 +#define MDMA_R 14208 +#define MCE_R 14209 +#define ETH1MAC_R 14218 +#define FMC_R 14220 +#define QSPI_R 14222 +#define SDMMC1_R 14224 +#define SDMMC2_R 14225 +#define CRC1_R 14228 +#define USBH_R 14232 +#define ETH2MAC_R 14238 + +/* SCMI reset domain identifiers */ +#define RST_SCMI_LTDC 0 +#define RST_SCMI_MDMA 1 + +#endif /* _DT_BINDINGS_STM32MP13_RESET_H_ */ diff --git a/dts/include/dt-bindings/reset/tegra234-reset.h b/dts/include/dt-bindings/reset/tegra234-reset.h index 1362cd5e03..547ca3b60c 100644 --- a/dts/include/dt-bindings/reset/tegra234-reset.h +++ b/dts/include/dt-bindings/reset/tegra234-reset.h @@ -40,6 +40,8 @@ #define TEGRA234_RESET_PWM6 73U #define TEGRA234_RESET_PWM7 74U #define TEGRA234_RESET_PWM8 75U +#define TEGRA234_RESET_QSPI0 76U +#define TEGRA234_RESET_QSPI1 77U #define TEGRA234_RESET_SDMMC4 85U #define TEGRA234_RESET_UARTA 100U #define TEGRA234_RESET_PEX0_CORE_0 116U diff --git a/dts/include/dt-bindings/soc/rockchip,vop2.h b/dts/include/dt-bindings/soc/rockchip,vop2.h new file mode 100644 index 0000000000..6e66a802b9 --- /dev/null +++ b/dts/include/dt-bindings/soc/rockchip,vop2.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */ + +#ifndef __DT_BINDINGS_ROCKCHIP_VOP2_H +#define __DT_BINDINGS_ROCKCHIP_VOP2_H + +#define ROCKCHIP_VOP2_EP_RGB0 1 +#define ROCKCHIP_VOP2_EP_HDMI0 2 +#define ROCKCHIP_VOP2_EP_EDP0 3 +#define ROCKCHIP_VOP2_EP_MIPI0 4 +#define ROCKCHIP_VOP2_EP_LVDS0 5 +#define ROCKCHIP_VOP2_EP_MIPI1 6 +#define ROCKCHIP_VOP2_EP_LVDS1 7 + +#endif /* __DT_BINDINGS_ROCKCHIP_VOP2_H */ diff --git a/dts/include/dt-bindings/sound/cs35l45.h b/dts/include/dt-bindings/sound/cs35l45.h new file mode 100644 index 0000000000..076da4b2c2 --- /dev/null +++ b/dts/include/dt-bindings/sound/cs35l45.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ +/* + * cs35l45.h -- CS35L45 ALSA SoC audio driver DT bindings header + * + * Copyright 2022 Cirrus Logic, Inc. + */ + +#ifndef DT_CS35L45_H +#define DT_CS35L45_H + +/* + * cirrus,asp-sdout-hiz-ctrl + * + * TX_HIZ_UNUSED: TX pin high-impedance during unused slots. + * TX_HIZ_DISABLED: TX pin high-impedance when all channels disabled. + */ +#define CS35L45_ASP_TX_HIZ_UNUSED 0x1 +#define CS35L45_ASP_TX_HIZ_DISABLED 0x2 + +#endif /* DT_CS35L45_H */ diff --git a/dts/src/arm/am335x-baltos.dtsi b/dts/src/arm/am335x-baltos.dtsi index 3667026302..d3eafee79a 100644 --- a/dts/src/arm/am335x-baltos.dtsi +++ b/dts/src/arm/am335x-baltos.dtsi @@ -285,7 +285,7 @@ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1312500>; + regulator-max-microvolt = <1351500>; regulator-boot-on; regulator-always-on; }; diff --git a/dts/src/arm/am335x-bone-common.dtsi b/dts/src/arm/am335x-bone-common.dtsi index 56ae5095a5..02e04a12a2 100644 --- a/dts/src/arm/am335x-bone-common.dtsi +++ b/dts/src/arm/am335x-bone-common.dtsi @@ -405,3 +405,7 @@ &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-bone-scale-data.bin"; +}; diff --git a/dts/src/arm/am335x-evm.dts b/dts/src/arm/am335x-evm.dts index 659e99eabe..b9745a2f0e 100644 --- a/dts/src/arm/am335x-evm.dts +++ b/dts/src/arm/am335x-evm.dts @@ -782,3 +782,7 @@ &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-evm-scale-data.bin"; +}; diff --git a/dts/src/arm/am335x-evmsk.dts b/dts/src/arm/am335x-evmsk.dts index a2db65538e..9c458e5a95 100644 --- a/dts/src/arm/am335x-evmsk.dts +++ b/dts/src/arm/am335x-evmsk.dts @@ -719,3 +719,7 @@ &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-evm-scale-data.bin"; +}; diff --git a/dts/src/arm/am335x-guardian.dts b/dts/src/arm/am335x-guardian.dts index 1918766c1f..1a7e187b19 100644 --- a/dts/src/arm/am335x-guardian.dts +++ b/dts/src/arm/am335x-guardian.dts @@ -29,39 +29,44 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - gpio_keys { + guardian_buttons: gpio-keys { + pinctrl-names = "default"; + pinctrl-0 = <&guardian_button_pins>; compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pins>; - button21 { + select-button { + label = "guardian-select-button"; + linux,code = ; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + power-button { label = "guardian-power-button"; linux,code = ; - gpios = <&gpio2 21 0>; + gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; wakeup-source; }; }; - leds { - compatible = "gpio-leds"; + guardian_leds: gpio-leds { pinctrl-names = "default"; - pinctrl-0 = <&leds_pins>; + pinctrl-0 = <&guardian_led_pins>; + compatible = "gpio-leds"; - led1 { - label = "green:heartbeat"; - gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + life-led { + label = "guardian:life-led"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; + }; - led2 { - label = "green:mmc0"; - gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; }; panel { @@ -100,20 +105,36 @@ }; - pwm7: dmtimer-pwm { + guardian_beeper: dmtimer-pwm@7 { compatible = "ti,omap-dmtimer-pwm"; ti,timers = <&timer7>; pinctrl-names = "default"; - pinctrl-0 = <&dmtimer7_pins>; + pinctrl-0 = <&guardian_beeper_pins>; ti,clock-source = <0x01>; }; - vmmcsd_fixed: regulator-3v3 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + mt_keypad: mt_keypad@0 { + compatible = "gpio-mt-keypad"; + debounce-delay-ms = <10>; + col-scan-delay-us = <2>; + keypad,num-lines = <5>; + linux,no-autorepeat; + gpio-activelow; + line-gpios = < + &gpio1 24 GPIO_ACTIVE_LOW /*gpio_56*/ + &gpio1 23 GPIO_ACTIVE_LOW /*gpio_55*/ + &gpio1 22 GPIO_ACTIVE_LOW /*gpio_54*/ + &gpio1 20 GPIO_ACTIVE_LOW /*gpio_52*/ + &gpio1 16 GPIO_ACTIVE_LOW /*gpio_48*/ + >; + }; }; &elm { @@ -133,28 +154,29 @@ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + ti,nand-xfer-type = "prefetch-dma"; ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; + gpmc,cs-rd-off-ns = <30>; + gpmc,cs-wr-off-ns = <30>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <30>; + gpmc,adv-wr-off-ns = <30>; gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <40>; - gpmc,oe-on-ns = <0>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; + gpmc,we-off-ns = <15>; + gpmc,oe-on-ns = <1>; + gpmc,oe-off-ns = <15>; + gpmc,access-ns = <30>; + gpmc,rd-cycle-ns = <30>; + gpmc,wr-cycle-ns = <30>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wr-access-ns = <40>; + gpmc,wr-access-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; /* @@ -198,18 +220,33 @@ }; partition@6 { - label = "u-boot-env"; - reg = <0x300000 0x40000>; + label = "u-boot-2"; + reg = <0x300000 0x100000>; }; partition@7 { - label = "u-boot-env.backup1"; - reg = <0x340000 0x40000>; + label = "u-boot-2.backup1"; + reg = <0x400000 0x100000>; }; partition@8 { + label = "u-boot-env"; + reg = <0x500000 0x40000>; + }; + + partition@9 { + label = "u-boot-env.backup1"; + reg = <0x540000 0x40000>; + }; + + partition@10 { + label = "splash-screen"; + reg = <0x580000 0x40000>; + }; + + partition@11 { label = "UBI"; - reg = <0x380000 0x1fc80000>; + reg = <0x5c0000 0x1fa40000>; }; }; }; @@ -228,6 +265,11 @@ &lcdc { blue-and-red-wiring = "crossed"; status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <0>; + }; + }; }; &mmc1 { @@ -242,7 +284,6 @@ &rtc { clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; - system-power-controller; }; &spi0 { @@ -255,14 +296,34 @@ #include "tps65217.dtsi" &tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ ti,pmic-shutdown-controller; interrupt-parent = <&intc>; interrupts = <7>; /* NMI */ backlight { isel = <1>; /* 1 - ISET1, 2 ISET2 */ - fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ - default-brightness = <100>; + fdim = <500>; /* TPS65217_BL_FDIM_500HZ */ + default-brightness = <50>; + /* 1(on) - enable current sink, while initialization */ + /* 0(off) - disable current sink, while initialization */ + isink-en = <1>; }; regulators { @@ -272,6 +333,7 @@ }; dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; regulator-max-microvolt = <1351500>; @@ -280,6 +342,7 @@ }; dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; regulator-max-microvolt = <1150000>; @@ -319,171 +382,364 @@ }; }; +&gpio0 { + gpio-line-names = + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MirxWakeup", + "", + ""; +}; + +&gpio3 { + ti,gpio-always-on; + ti,no-reset-on-init; + gpio-line-names = + "", + "MirxBtReset", + "", + "CcVolAdcEn", + "MirxBlePause", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AspEn", + "", + "", + "", + "", + "", + "", + "BatVolAdcEn", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; status = "okay"; }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + &usb0 { dr_mode = "peripheral"; }; &usb1 { dr_mode = "host"; + /delete-property/dmas; + /delete-property/dma-names; }; &am33xx_pinmux { pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin &gpio_pins>; + pinctrl-0 = <&clkout2_pin &guardian_interface_pins>; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < + /* xdma_event_intr1.clkout2 */ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) >; }; - dmtimer7_pins: pinmux_dmtimer7_pins { + guardian_interface_pins: pinmux_interface_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) + /* ADC_BATSENSE_EN */ + /* (A14) MCASP0_AHCLKx.gpio3[21] */ + AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* ADC_COINCELL_EN */ + /* (J16) MII1_TX_EN.gpio3[3] */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* ASP_ENABLE */ + /* (A13) MCASP0_ACLKx.gpio3[14] */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP | MUX_MODE7) + /* (D16) uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE7) + /* (D15) uart1_txd.uart1_txd */ + AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE7) + /*SWITCH-OFF_3V6*/ + /* (M18) gpio0[1] */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE7) + /* MIRACULIX */ + /* (H17) gmii1_crs.gpio3[1] */ + AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* (H18) rmii1_refclk.gpio0[29] */ + AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* (J18) gmii1_txd3.gpio0[16] */ + AM33XX_IOPAD(0x91c, PIN_INPUT | MUX_MODE7 ) + /* (J17) gmii1_rxdv.gpio3[4] */ + AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) >; }; - gpio_keys_pins: pinmux_gpio_keys_pins { + guardian_beeper_pins: pinmux_dmtimer7_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */ >; }; - gpio_pins: pinmux_gpio_pins { + guardian_button_pins: pinmux_guardian_button_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ + AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9) gpmc_csn2.gpio1[31] */ >; }; + i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + led_bl_pins: gpio_led_bl_pins { + pinctrl-single,pins = < + /* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */ + AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7) >; }; lcd_disen_pins: pinmux_lcd_disen_pins { pinctrl-single,pins = < + /* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */ AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7) >; }; lcd_pins_default: pinmux_lcd_pins_default { pinctrl-single,pins = < + /* (U10) gpmc_ad8.lcd_data23 */ AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (T10) gpmc_ad9.lcd_data22 */ AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (T11) gpmc_ad10.lcd_data21 */ AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (U12) gpmc_ad11.lcd_data20 */ AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (T12) gpmc_ad12.lcd_data19 */ AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (R12) gpmc_ad13.lcd_data18 */ AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (V13) gpmc_ad14.lcd_data17 */ AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (U13) gpmc_ad15.lcd_data16 */ AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* lcd_data0.lcd_data0 */ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data1.lcd_data1 */ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data2.lcd_data2 */ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data3.lcd_data3 */ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data4.lcd_data4 */ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data5.lcd_data5 */ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data6.lcd_data6 */ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data7.lcd_data7 */ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data8.lcd_data8 */ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data9.lcd_data9 */ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data10.lcd_data10 */ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data11.lcd_data11 */ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data12.lcd_data12 */ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data13.lcd_data13 */ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data14.lcd_data14 */ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data15.lcd_data15 */ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_vsync.lcd_vsync */ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_hsync.lcd_hsync */ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_pclk.lcd_pclk */ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_ac_bias_en.lcd_ac_bias_en */ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) >; }; lcd_pins_sleep: pinmux_lcd_pins_sleep { pinctrl-single,pins = < + /* lcd_data0.lcd_data0 */ AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data1.lcd_data1 */ AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data2.lcd_data2 */ AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data3.lcd_data3 */ AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data4.lcd_data4 */ AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data5.lcd_data5 */ AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data6.lcd_data6 */ AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data7.lcd_data7 */ AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data8.lcd_data8 */ AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data9.lcd_data9 */ AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data10.lcd_data10 */ AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data11.lcd_data11 */ AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data12.lcd_data12 */ AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data13.lcd_data13 */ AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data14.lcd_data14 */ AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data15.lcd_data15 */ AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_vsync.lcd_vsync */ AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_hsync.lcd_hsync */ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_pclk.lcd_pclk */ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_ac_bias_en.lcd_ac_bias_en */ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) >; }; - leds_pins: pinmux_leds_pins { + guardian_led_pins: pinmux_guardian_led_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ >; }; spi0_pins: pinmux_spi0_pins { pinctrl-single,pins = < + /* SPI0_CLK - spi0_clk.spi */ AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* SPI0_MOSI - spi0_d0.spi0 */ AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) + /* SPI0_MISO - spi0_d1.spi0 */ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) + /* SPI0_CS0 - spi */ AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0) >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < + /* uart0_rxd.uart0_rxd */ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart0_txd.uart0_txd */ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) >; }; + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + /* K18 uart2_rxd.mirx_txd */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1) + /* L18 uart2_txd.mirx_rxd */ + AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1) + >; + }; + nandflash_pins: pinmux_nandflash_pins { pinctrl-single,pins = < + /* (U7) gpmc_ad0.gpmc_ad0 */ AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0) + /* (V7) gpmc_ad1.gpmc_ad1 */ AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0) + /* (R8) gpmc_ad2.gpmc_ad2 */ AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0) + /* (T8) gpmc_ad3.gpmc_ad3 */ AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) + /* (U8) gpmc_ad4.gpmc_ad4 */ AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0) + /* (V8) gpmc_ad5.gpmc_ad5 */ AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0) + /* (R9) gpmc_ad6.gpmc_ad6 */ AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0) + /* (T9) gpmc_ad7.gpmc_ad7 */ AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) + /* (T17) gpmc_wait0.gpmc_wait0 */ AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0) + /* (U17) gpmc_wpn.gpmc_wpn */ AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0) + /* (V6) gpmc_csn0.gpmc_csn0 */ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) + /* (R7) gpmc_advn_ale.gpmc_advn_ale */ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) + /* (T7) gpmc_oen_ren.gpmc_oen_ren */ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) + /* (U6) gpmc_wen.gpmc_wen */ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) + /* (T6) gpmc_be0n_cle.gpmc_be0n_cle */ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) >; }; diff --git a/dts/src/arm/am335x-moxa-uc-2100-common.dtsi b/dts/src/arm/am335x-moxa-uc-2100-common.dtsi index 11e8f64b66..92a0e98ec2 100644 --- a/dts/src/arm/am335x-moxa-uc-2100-common.dtsi +++ b/dts/src/arm/am335x-moxa-uc-2100-common.dtsi @@ -182,7 +182,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - m25p80@0 { + flash@0 { compatible = "mx25l6405d"; spi-max-frequency = <40000000>; diff --git a/dts/src/arm/am335x-moxa-uc-8100-common.dtsi b/dts/src/arm/am335x-moxa-uc-8100-common.dtsi index a7269b90d7..e7e439a063 100644 --- a/dts/src/arm/am335x-moxa-uc-8100-common.dtsi +++ b/dts/src/arm/am335x-moxa-uc-8100-common.dtsi @@ -394,7 +394,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - m25p80@0 { + flash@0 { compatible = "mx25l6405d"; spi-max-frequency = <40000000>; diff --git a/dts/src/arm/am335x-myirtech-myc.dtsi b/dts/src/arm/am335x-myirtech-myc.dtsi index 245c35f41c..6eea18b293 100644 --- a/dts/src/arm/am335x-myirtech-myc.dtsi +++ b/dts/src/arm/am335x-myirtech-myc.dtsi @@ -27,6 +27,13 @@ reg = <0x80000000 0x10000000>; }; + clk32k: clk32k { + compatible = "fixed-clock"; + clock-frequency = <32768>; + + #clock-cells = <0>; + }; + vdd_mod: vdd_mod_reg { compatible = "regulator-fixed"; regulator-name = "vdd-mod"; @@ -124,9 +131,6 @@ gpmc,wr-data-mux-bus-ns = <0>; ti,elm-id = <&elm>; ti,nand-ecc-opt = "bch8"; - - #address-cells = <1>; - #size-cells = <1>; }; }; @@ -149,6 +153,8 @@ }; &rtc { + clocks = <&clk32k>; + clock-names = "ext-clk"; system-power-controller; }; diff --git a/dts/src/arm/am335x-myirtech-myd.dts b/dts/src/arm/am335x-myirtech-myd.dts index 1479fd95de..9d81d4cc68 100644 --- a/dts/src/arm/am335x-myirtech-myd.dts +++ b/dts/src/arm/am335x-myirtech-myd.dts @@ -227,14 +227,20 @@ }; &nand0 { - partition@0 { - label = "MLO"; - reg = <0x00000 0x20000>; - }; + nand_parts: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - partition@20000 { - label = "boot"; - reg = <0x20000 0x80000>; + partition@0 { + label = "MLO"; + reg = <0x00000 0x20000>; + }; + + partition@80000 { + label = "boot"; + reg = <0x80000 0x100000>; + }; }; }; diff --git a/dts/src/arm/am335x-phycore-som.dtsi b/dts/src/arm/am335x-phycore-som.dtsi index f65cd13313..e2cec1ffaa 100644 --- a/dts/src/arm/am335x-phycore-som.dtsi +++ b/dts/src/arm/am335x-phycore-som.dtsi @@ -331,7 +331,7 @@ pinctrl-0 = <&spi0_pins>; status = "okay"; - serial_flash: m25p80@0 { + serial_flash: flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <48000000>; reg = <0x0>; diff --git a/dts/src/arm/am335x-sl50.dts b/dts/src/arm/am335x-sl50.dts index 6516907ed5..73b5d1a024 100644 --- a/dts/src/arm/am335x-sl50.dts +++ b/dts/src/arm/am335x-sl50.dts @@ -588,7 +588,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - flash: n25q032@1 { + flash: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q032"; diff --git a/dts/src/arm/am33xx-clocks.dtsi b/dts/src/arm/am33xx-clocks.dtsi index b7b7106f2d..d34483ae17 100644 --- a/dts/src/arm/am33xx-clocks.dtsi +++ b/dts/src/arm/am33xx-clocks.dtsi @@ -5,251 +5,288 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &scm_clocks { - sys_clkin_ck: sys_clkin_ck@40 { + sys_clkin_ck: clock-sys-clkin-22@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin_ck"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <22>; reg = <0x0040>; }; - adc_tsc_fck: adc_tsc_fck { + adc_tsc_fck: clock-adc-tsc-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "adc_tsc_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan0_fck: dcan0_fck { + dcan0_fck: clock-dcan0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan1_fck: dcan1_fck { + dcan1_fck: clock-dcan1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp0_fck: mcasp0_fck { + mcasp0_fck: clock-mcasp0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp1_fck: mcasp1_fck { + mcasp1_fck: clock-mcasp1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex0_fck: smartreflex0_fck { + smartreflex0_fck: clock-smartreflex0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex1_fck: smartreflex1_fck { + smartreflex1_fck: clock-smartreflex1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - sha0_fck: sha0_fck { + sha0_fck: clock-sha0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sha0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - aes0_fck: aes0_fck { + aes0_fck: clock-aes0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "aes0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - rng_fck: rng_fck { + rng_fck: clock-rng-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "rng_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4ls_gclk>; - ti,bit-shift = <0>; - reg = <0x0664>; - }; + clock@664 { + compatible = "ti,clksel"; + reg = <0x664>; + #clock-cells = <2>; + #address-cells = <0>; - ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4ls_gclk>; - ti,bit-shift = <1>; - reg = <0x0664>; - }; + ehrpwm0_tbclk: clock-ehrpwm0-tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm0_tbclk"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <0>; + }; - ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4ls_gclk>; - ti,bit-shift = <2>; - reg = <0x0664>; + ehrpwm1_tbclk: clock-ehrpwm1-tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm1_tbclk"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <1>; + }; + + ehrpwm2_tbclk: clock-ehrpwm2-tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm2_tbclk"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <2>; + }; }; }; &prcm_clocks { - clk_32768_ck: clk_32768_ck { + clk_32768_ck: clock-clk-32768 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32768_ck"; clock-frequency = <32768>; }; - clk_rc32k_ck: clk_rc32k_ck { + clk_rc32k_ck: clock-clk-rc32k { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_rc32k_ck"; clock-frequency = <32000>; }; - virt_19200000_ck: virt_19200000_ck { + virt_19200000_ck: clock-virt-19200000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; - virt_24000000_ck: virt_24000000_ck { + virt_24000000_ck: clock-virt-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_24000000_ck"; clock-frequency = <24000000>; }; - virt_25000000_ck: virt_25000000_ck { + virt_25000000_ck: clock-virt-25000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_25000000_ck"; clock-frequency = <25000000>; }; - virt_26000000_ck: virt_26000000_ck { + virt_26000000_ck: clock-virt-26000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; - tclkin_ck: tclkin_ck { + tclkin_ck: clock-tclkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "tclkin_ck"; clock-frequency = <12000000>; }; - dpll_core_ck: dpll_core_ck@490 { + dpll_core_ck: clock@490 { #clock-cells = <0>; compatible = "ti,am3-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0490>, <0x045c>, <0x0468>, <0x0460>, <0x0464>; }; - dpll_core_x2_ck: dpll_core_x2_ck { + dpll_core_x2_ck: clock-dpll-core-x2 { #clock-cells = <0>; compatible = "ti,am3-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; - dpll_core_m4_ck: dpll_core_m4_ck@480 { + dpll_core_m4_ck: clock-dpll-core-m4@480 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m4_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0480>; ti,index-starts-at-one; }; - dpll_core_m5_ck: dpll_core_m5_ck@484 { + dpll_core_m5_ck: clock-dpll-core-m5@484 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m5_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0484>; ti,index-starts-at-one; }; - dpll_core_m6_ck: dpll_core_m6_ck@4d8 { + dpll_core_m6_ck: clock-dpll-core-m6@4d8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m6_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x04d8>; ti,index-starts-at-one; }; - dpll_mpu_ck: dpll_mpu_ck@488 { + dpll_mpu_ck: clock@488 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0488>, <0x0420>, <0x042c>, <0x0424>, <0x0428>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 { + dpll_mpu_m2_ck: clock-dpll-mpu-m2@4a8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; reg = <0x04a8>; ti,index-starts-at-one; }; - dpll_ddr_ck: dpll_ddr_ck@494 { + dpll_ddr_ck: clock@494 { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-clock"; + clock-output-names = "dpll_ddr_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0494>, <0x0434>, <0x0440>, <0x0438>, <0x043c>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 { + dpll_ddr_m2_ck: clock-dpll-ddr-m2@4a0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m2_ck"; clocks = <&dpll_ddr_ck>; ti,max-div = <31>; reg = <0x04a0>; ti,index-starts-at-one; }; - dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck { + dpll_ddr_m2_div2_ck: clock-dpll-ddr-m2-div2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_ddr_m2_div2_ck"; clocks = <&dpll_ddr_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - dpll_disp_ck: dpll_disp_ck@498 { + dpll_disp_ck: clock@498 { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-clock"; + clock-output-names = "dpll_disp_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>; }; - dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 { + dpll_disp_m2_ck: clock-dpll-disp-m2@4a4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_disp_m2_ck"; clocks = <&dpll_disp_ck>; ti,max-div = <31>; reg = <0x04a4>; @@ -257,418 +294,484 @@ ti,set-rate-parent; }; - dpll_per_ck: dpll_per_ck@48c { + dpll_per_ck: clock@48c { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-j-type-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x048c>, <0x0470>, <0x049c>, <0x0474>, <0x0478>; }; - dpll_per_m2_ck: dpll_per_m2_ck@4ac { + dpll_per_m2_ck: clock-dpll-per-m2@4ac { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; reg = <0x04ac>; ti,index-starts-at-one; }; - dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck { + dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_wkupdm_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - dpll_per_m2_div4_ck: dpll_per_m2_div4_ck { + dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - clk_24mhz: clk_24mhz { + clk_24mhz: clock-clk-24mhz { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clk_24mhz"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <8>; }; - clkdiv32k_ck: clkdiv32k_ck { + clkdiv32k_ck: clock-clkdiv32k { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clkdiv32k_ck"; clocks = <&clk_24mhz>; clock-mult = <1>; clock-div = <732>; }; - l3_gclk: l3_gclk { + l3_gclk: clock-l3-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - pruss_ocp_gclk: pruss_ocp_gclk@530 { + pruss_ocp_gclk: clock-pruss-ocp-gclk@530 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "pruss_ocp_gclk"; clocks = <&l3_gclk>, <&dpll_disp_m2_ck>; reg = <0x0530>; }; - mmu_fck: mmu_fck@914 { + mmu_fck: clock-mmu-fck-1@914 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "mmu_fck"; clocks = <&dpll_core_m4_ck>; ti,bit-shift = <1>; reg = <0x0914>; }; - timer1_fck: timer1_fck@528 { + timer1_fck: clock-timer1-fck@528 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer1_fck"; clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; reg = <0x0528>; }; - timer2_fck: timer2_fck@508 { + timer2_fck: clock-timer2-fck@508 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer2_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0508>; }; - timer3_fck: timer3_fck@50c { + timer3_fck: clock-timer3-fck@50c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer3_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x050c>; }; - timer4_fck: timer4_fck@510 { + timer4_fck: clock-timer4-fck@510 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer4_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0510>; }; - timer5_fck: timer5_fck@518 { + timer5_fck: clock-timer5-fck@518 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer5_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0518>; }; - timer6_fck: timer6_fck@51c { + timer6_fck: clock-timer6-fck@51c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer6_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x051c>; }; - timer7_fck: timer7_fck@504 { + timer7_fck: clock-timer7-fck@504 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer7_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0504>; }; - usbotg_fck: usbotg_fck@47c { + usbotg_fck: clock-usbotg-fck-8@47c { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usbotg_fck"; clocks = <&dpll_per_ck>; ti,bit-shift = <8>; reg = <0x047c>; }; - dpll_core_m4_div2_ck: dpll_core_m4_div2_ck { + dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_core_m4_div2_ck"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <2>; }; - ieee5000_fck: ieee5000_fck@e4 { + ieee5000_fck: clock-ieee5000-fck-1@e4 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ieee5000_fck"; clocks = <&dpll_core_m4_div2_ck>; ti,bit-shift = <1>; reg = <0x00e4>; }; - wdt1_fck: wdt1_fck@538 { + wdt1_fck: clock-wdt1-fck@538 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wdt1_fck"; clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0538>; }; - l4_rtc_gclk: l4_rtc_gclk { + l4_rtc_gclk: clock-l4-rtc-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4_rtc_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <2>; }; - l4hs_gclk: l4hs_gclk { + l4hs_gclk: clock-l4hs-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4hs_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - l3s_gclk: l3s_gclk { + l3s_gclk: clock-l3s-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3s_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - l4fw_gclk: l4fw_gclk { + l4fw_gclk: clock-l4fw-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4fw_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - l4ls_gclk: l4ls_gclk { + l4ls_gclk: clock-l4ls-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4ls_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - sysclk_div_ck: sysclk_div_ck { + sysclk_div_ck: clock-sysclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sysclk_div_ck"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - cpsw_125mhz_gclk: cpsw_125mhz_gclk { + cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_125mhz_gclk"; clocks = <&dpll_core_m5_ck>; clock-mult = <1>; clock-div = <2>; }; - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 { + cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@520 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "cpsw_cpts_rft_clk"; clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>; reg = <0x0520>; }; - gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c { + gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@53c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpio0_dbclk_mux_ck"; clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x053c>; }; - lcd_gclk: lcd_gclk@534 { + lcd_gclk: clock-lcd-gclk@534 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "lcd_gclk"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; reg = <0x0534>; ti,set-rate-parent; }; - mmc_clk: mmc_clk { + mmc_clk: clock-mmc { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mmc_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>; - ti,bit-shift = <1>; - reg = <0x052c>; - }; + clock@52c { + compatible = "ti,clksel"; + reg = <0x52c>; + #clock-cells = <2>; + #address-cells = <0>; - gfx_fck_div_ck: gfx_fck_div_ck@52c { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&gfx_fclk_clksel_ck>; - reg = <0x052c>; - ti,max-div = <2>; - }; + gfx_fclk_clksel_ck: clock-gfx-fclk-clksel { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "gfx_fclk_clksel_ck"; + clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>; + ti,bit-shift = <1>; + }; - sysclkout_pre_ck: sysclkout_pre_ck@700 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>; - reg = <0x0700>; + gfx_fck_div_ck: clock-gfx-fck-div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "gfx_fck_div_ck"; + clocks = <&gfx_fclk_clksel_ck>; + ti,max-div = <2>; + }; }; - clkout2_div_ck: clkout2_div_ck@700 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&sysclkout_pre_ck>; - ti,bit-shift = <3>; - ti,max-div = <8>; - reg = <0x0700>; - }; + clock@700 { + compatible = "ti,clksel"; + reg = <0x700>; + #clock-cells = <2>; + #address-cells = <0>; - clkout2_ck: clkout2_ck@700 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkout2_div_ck>; - ti,bit-shift = <7>; - reg = <0x0700>; + sysclkout_pre_ck: clock-sysclkout-pre { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "sysclkout_pre_ck"; + clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>; + }; + + clkout2_div_ck: clock-clkout2-div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "clkout2_div_ck"; + clocks = <&sysclkout_pre_ck>; + ti,bit-shift = <3>; + ti,max-div = <8>; + }; + + clkout2_ck: clock-clkout2 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "clkout2_ck"; + clocks = <&clkout2_div_ck>; + ti,bit-shift = <7>; + }; }; }; &prcm { - per_cm: per-cm@0 { + per_cm: clock@0 { compatible = "ti,omap4-cm"; + clock-output-names = "per_cm"; reg = <0x0 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x0 0x400>; - l4ls_clkctrl: l4ls-clkctrl@38 { + l4ls_clkctrl: clock@38 { compatible = "ti,clkctrl"; + clock-output-names = "l4ls_clkctrl"; reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>; #clock-cells = <2>; }; - l3s_clkctrl: l3s-clkctrl@1c { + l3s_clkctrl: clock@1c { compatible = "ti,clkctrl"; + clock-output-names = "l3s_clkctrl"; reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>; #clock-cells = <2>; }; - l3_clkctrl: l3-clkctrl@24 { + l3_clkctrl: clock@24 { compatible = "ti,clkctrl"; + clock-output-names = "l3_clkctrl"; reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>; #clock-cells = <2>; }; - l4hs_clkctrl: l4hs-clkctrl@120 { + l4hs_clkctrl: clock@120 { compatible = "ti,clkctrl"; + clock-output-names = "l4hs_clkctrl"; reg = <0x120 0x4>; #clock-cells = <2>; }; - pruss_ocp_clkctrl: pruss-ocp-clkctrl@e8 { + pruss_ocp_clkctrl: clock@e8 { compatible = "ti,clkctrl"; + clock-output-names = "pruss_ocp_clkctrl"; reg = <0xe8 0x4>; #clock-cells = <2>; }; - cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@0 { + cpsw_125mhz_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "cpsw_125mhz_clkctrl"; reg = <0x0 0x18>; #clock-cells = <2>; }; - lcdc_clkctrl: lcdc-clkctrl@18 { + lcdc_clkctrl: clock@18 { compatible = "ti,clkctrl"; + clock-output-names = "lcdc_clkctrl"; reg = <0x18 0x4>; #clock-cells = <2>; }; - clk_24mhz_clkctrl: clk-24mhz-clkctrl@14c { + clk_24mhz_clkctrl: clock@14c { compatible = "ti,clkctrl"; + clock-output-names = "clk_24mhz_clkctrl"; reg = <0x14c 0x4>; #clock-cells = <2>; }; }; - wkup_cm: wkup-cm@400 { + wkup_cm: clock@400 { compatible = "ti,omap4-cm"; + clock-output-names = "wkup_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x400 0x100>; - l4_wkup_clkctrl: l4-wkup-clkctrl@0 { + l4_wkup_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_clkctrl"; reg = <0x0 0x10>, <0xb4 0x24>; #clock-cells = <2>; }; - l3_aon_clkctrl: l3-aon-clkctrl@14 { + l3_aon_clkctrl: clock@14 { compatible = "ti,clkctrl"; + clock-output-names = "l3_aon_clkctrl"; reg = <0x14 0x4>; #clock-cells = <2>; }; - l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@b0 { + l4_wkup_aon_clkctrl: clock@b0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_aon_clkctrl"; reg = <0xb0 0x4>; #clock-cells = <2>; }; }; - mpu_cm: mpu-cm@600 { + mpu_cm: clock@600 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - mpu_clkctrl: mpu-clkctrl@0 { + mpu_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x0 0x8>; #clock-cells = <2>; }; }; - l4_rtc_cm: l4-rtc-cm@800 { + l4_rtc_cm: clock@800 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_rtc_cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x800 0x100>; - l4_rtc_clkctrl: l4-rtc-clkctrl@0 { + l4_rtc_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_rtc_clkctrl"; reg = <0x0 0x4>; #clock-cells = <2>; }; }; - gfx_l3_cm: gfx-l3-cm@900 { + gfx_l3_cm: clock@900 { compatible = "ti,omap4-cm"; + clock-output-names = "gfx_l3_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x900 0x100>; - gfx_l3_clkctrl: gfx-l3-clkctrl@0 { + gfx_l3_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "gfx_l3_clkctrl"; reg = <0x0 0x8>; #clock-cells = <2>; }; }; - l4_cefuse_cm: l4-cefuse-cm@a00 { + l4_cefuse_cm: clock@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_cefuse_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xa00 0x100>; - l4_cefuse_clkctrl: l4-cefuse-clkctrl@0 { + l4_cefuse_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_cefuse_clkctrl"; reg = <0x0 0x24>; #clock-cells = <2>; }; diff --git a/dts/src/arm/am33xx.dtsi b/dts/src/arm/am33xx.dtsi index f6ec85d58d..9a8698bd28 100644 --- a/dts/src/arm/am33xx.dtsi +++ b/dts/src/arm/am33xx.dtsi @@ -461,8 +461,11 @@ interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <30>; + dma-channels = <30>; #dma-requests = <256>; + dma-requests = <256>; }; }; diff --git a/dts/src/arm/am35xx-clocks.dtsi b/dts/src/arm/am35xx-clocks.dtsi index 220d0a5279..0ee7afaa0e 100644 --- a/dts/src/arm/am35xx-clocks.dtsi +++ b/dts/src/arm/am35xx-clocks.dtsi @@ -62,12 +62,27 @@ }; }; &cm_clocks { - ipss_ick: ipss_ick@a10 { - #clock-cells = <0>; - compatible = "ti,am35xx-interface-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <4>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + ipss_ick: clock-ipss-ick { + #clock-cells = <0>; + compatible = "ti,am35xx-interface-clock"; + clock-output-names = "ipss_ick"; + clocks = <&core_l3_ick>; + ti,bit-shift = <4>; + }; + + uart4_ick_am35xx: clock-uart4-ick-am35xx { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart4_ick_am35xx"; + clocks = <&core_l4_ick>; + ti,bit-shift = <23>; + }; }; rmii_ck: rmii_ck { @@ -82,20 +97,19 @@ clock-frequency = <27000000>; }; - uart4_ick_am35xx: uart4_ick_am35xx@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <23>; - }; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; - uart4_fck_am35xx: uart4_fck_am35xx@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <23>; + uart4_fck_am35xx: clock-uart4-fck-am35xx { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart4_fck_am35xx"; + clocks = <&core_48m_fck>; + ti,bit-shift = <23>; + }; }; }; diff --git a/dts/src/arm/am3874-iceboard.dts b/dts/src/arm/am3874-iceboard.dts index 9423e9feaa..c9323d1df3 100644 --- a/dts/src/arm/am3874-iceboard.dts +++ b/dts/src/arm/am3874-iceboard.dts @@ -434,7 +434,7 @@ }; &mcspi1 { - s25fl256@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm/am437x-cm-t43.dts b/dts/src/arm/am437x-cm-t43.dts index 3e3354780d..0861e868b7 100644 --- a/dts/src/arm/am437x-cm-t43.dts +++ b/dts/src/arm/am437x-cm-t43.dts @@ -302,7 +302,7 @@ &edma 17 0>; dma-names = "tx0", "rx0"; - flash: w25q64cvzpig@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm/am437x-gp-evm.dts b/dts/src/arm/am437x-gp-evm.dts index 4416ddb559..46d5361fe8 100644 --- a/dts/src/arm/am437x-gp-evm.dts +++ b/dts/src/arm/am437x-gp-evm.dts @@ -1127,6 +1127,11 @@ cpu0-supply = <&dcdc2>; }; +&wkup_m3_ipc { + ti,set-io-isolation; + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; }; diff --git a/dts/src/arm/am437x-idk-evm.dts b/dts/src/arm/am437x-idk-evm.dts index 53f64e3ce7..5a74b83145 100644 --- a/dts/src/arm/am437x-idk-evm.dts +++ b/dts/src/arm/am437x-idk-evm.dts @@ -437,7 +437,7 @@ pinctrl-1 = <&qspi_pins_sleep>; spi-max-frequency = <48000000>; - m25p80@0 { + flash@0 { compatible = "mx66l51235l"; spi-max-frequency = <48000000>; reg = <0>; diff --git a/dts/src/arm/am437x-sk-evm.dts b/dts/src/arm/am437x-sk-evm.dts index 20a34d2d85..036f3831dc 100644 --- a/dts/src/arm/am437x-sk-evm.dts +++ b/dts/src/arm/am437x-sk-evm.dts @@ -746,7 +746,7 @@ pinctrl-0 = <&qspi_pins>; spi-max-frequency = <48000000>; - m25p80@0 { + flash@0 { compatible = "mx66l51235l"; spi-max-frequency = <48000000>; reg = <0>; @@ -893,6 +893,10 @@ }; }; +&wkup_m3_ipc { + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; }; diff --git a/dts/src/arm/am43x-epos-evm.dts b/dts/src/arm/am43x-epos-evm.dts index 4f9a7251a1..27f4ce8555 100644 --- a/dts/src/arm/am43x-epos-evm.dts +++ b/dts/src/arm/am43x-epos-evm.dts @@ -902,7 +902,7 @@ pinctrl-1 = <&qspi1_pins_sleep>; spi-max-frequency = <48000000>; - m25p80@0 { + flash@0 { compatible = "mx66l51235l"; spi-max-frequency = <48000000>; reg = <0>; @@ -1019,6 +1019,10 @@ cpu0-supply = <&dcdc2>; }; +&wkup_m3_ipc { + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; }; diff --git a/dts/src/arm/am43xx-clocks.dtsi b/dts/src/arm/am43xx-clocks.dtsi index 66e892fa33..9a5437b3d6 100644 --- a/dts/src/arm/am43xx-clocks.dtsi +++ b/dts/src/arm/am43xx-clocks.dtsi @@ -5,217 +5,246 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &scm_clocks { - sys_clkin_ck: sys_clkin_ck@40 { + sys_clkin_ck: clock-sys-clkin-31@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin_ck"; clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>; ti,bit-shift = <31>; reg = <0x0040>; }; - crystal_freq_sel_ck: crystal_freq_sel_ck@40 { + crystal_freq_sel_ck: clock-crystal-freq-sel-29@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "crystal_freq_sel_ck"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <29>; reg = <0x0040>; }; - sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 { + sysboot_freq_sel_ck: clock-sysboot-freq-sel-22@44e10040 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sysboot_freq_sel_ck"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <22>; reg = <0x0040>; }; - adc_tsc_fck: adc_tsc_fck { + adc_tsc_fck: clock-adc-tsc-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "adc_tsc_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan0_fck: dcan0_fck { + dcan0_fck: clock-dcan0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan1_fck: dcan1_fck { + dcan1_fck: clock-dcan1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp0_fck: mcasp0_fck { + mcasp0_fck: clock-mcasp0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp1_fck: mcasp1_fck { + mcasp1_fck: clock-mcasp1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex0_fck: smartreflex0_fck { + smartreflex0_fck: clock-smartreflex0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex1_fck: smartreflex1_fck { + smartreflex1_fck: clock-smartreflex1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - sha0_fck: sha0_fck { + sha0_fck: clock-sha0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sha0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - aes0_fck: aes0_fck { + aes0_fck: clock-aes0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "aes0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - rng_fck: rng_fck { + rng_fck: clock-rng-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "rng_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk@664 { + ehrpwm0_tbclk: clock-ehrpwm0-tbclk-0@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm0_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; - ehrpwm1_tbclk: ehrpwm1_tbclk@664 { + ehrpwm1_tbclk: clock-ehrpwm1-tbclk-1@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm1_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; - ehrpwm2_tbclk: ehrpwm2_tbclk@664 { + ehrpwm2_tbclk: clock-ehrpwm2-tbclk-2@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm2_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; - ehrpwm3_tbclk: ehrpwm3_tbclk@664 { + ehrpwm3_tbclk: clock-ehrpwm3-tbclk-4@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm3_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <4>; reg = <0x0664>; }; - ehrpwm4_tbclk: ehrpwm4_tbclk@664 { + ehrpwm4_tbclk: clock-ehrpwm4-tbclk-5@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm4_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <5>; reg = <0x0664>; }; - ehrpwm5_tbclk: ehrpwm5_tbclk@664 { + ehrpwm5_tbclk: clock-ehrpwm5-tbclk-6@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm5_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <6>; reg = <0x0664>; }; }; &prcm_clocks { - clk_32768_ck: clk_32768_ck { + clk_32768_ck: clock-clk-32768 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32768_ck"; clock-frequency = <32768>; }; - clk_rc32k_ck: clk_rc32k_ck { + clk_rc32k_ck: clock-clk-rc32k { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_rc32k_ck"; clock-frequency = <32768>; }; - virt_19200000_ck: virt_19200000_ck { + virt_19200000_ck: clock-virt-19200000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; - virt_24000000_ck: virt_24000000_ck { + virt_24000000_ck: clock-virt-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_24000000_ck"; clock-frequency = <24000000>; }; - virt_25000000_ck: virt_25000000_ck { + virt_25000000_ck: clock-virt-25000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_25000000_ck"; clock-frequency = <25000000>; }; - virt_26000000_ck: virt_26000000_ck { + virt_26000000_ck: clock-virt-26000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; - tclkin_ck: tclkin_ck { + tclkin_ck: clock-tclkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "tclkin_ck"; clock-frequency = <26000000>; }; - dpll_core_ck: dpll_core_ck@2d20 { + dpll_core_ck: clock@2d20 { #clock-cells = <0>; compatible = "ti,am3-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>; }; - dpll_core_x2_ck: dpll_core_x2_ck { + dpll_core_x2_ck: clock-dpll-core-x2 { #clock-cells = <0>; compatible = "ti,am3-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; - dpll_core_m4_ck: dpll_core_m4_ck@2d38 { + dpll_core_m4_ck: clock-dpll-core-m4-8@2d38 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m4_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -224,9 +253,10 @@ ti,invert-autoidle-bit; }; - dpll_core_m5_ck: dpll_core_m5_ck@2d3c { + dpll_core_m5_ck: clock-dpll-core-m5-8@2d3c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m5_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -235,9 +265,10 @@ ti,invert-autoidle-bit; }; - dpll_core_m6_ck: dpll_core_m6_ck@2d40 { + dpll_core_m6_ck: clock-dpll-core-m6-8@2d40 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m6_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -246,16 +277,18 @@ ti,invert-autoidle-bit; }; - dpll_mpu_ck: dpll_mpu_ck@2d60 { + dpll_mpu_ck: clock@2d60 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 { + dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@2d70 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -264,24 +297,27 @@ ti,invert-autoidle-bit; }; - mpu_periphclk: mpu_periphclk { + mpu_periphclk: clock-mpu-periphclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_periphclk"; clocks = <&dpll_mpu_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - dpll_ddr_ck: dpll_ddr_ck@2da0 { + dpll_ddr_ck: clock@2da0 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_ddr_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 { + dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@2db0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m2_ck"; clocks = <&dpll_ddr_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -290,16 +326,18 @@ ti,invert-autoidle-bit; }; - dpll_disp_ck: dpll_disp_ck@2e20 { + dpll_disp_ck: clock@2e20 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_disp_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>; }; - dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 { + dpll_disp_m2_ck: clock-dpll-disp-m2-8@2e30 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_disp_m2_ck"; clocks = <&dpll_disp_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -309,16 +347,18 @@ ti,set-rate-parent; }; - dpll_per_ck: dpll_per_ck@2de0 { + dpll_per_ck: clock@2de0 { #clock-cells = <0>; compatible = "ti,am3-dpll-j-type-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>; }; - dpll_per_m2_ck: dpll_per_m2_ck@2df0 { + dpll_per_m2_ck: clock-dpll-per-m2-8@2df0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -327,119 +367,135 @@ ti,invert-autoidle-bit; }; - dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck { + dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_wkupdm_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - dpll_per_m2_div4_ck: dpll_per_m2_div4_ck { + dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - clk_24mhz: clk_24mhz { + clk_24mhz: clock-clk-24mhz { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clk_24mhz"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <8>; }; - clkdiv32k_ck: clkdiv32k_ck { + clkdiv32k_ck: clock-clkdiv32k { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clkdiv32k_ck"; clocks = <&clk_24mhz>; clock-mult = <1>; clock-div = <732>; }; - clkdiv32k_ick: clkdiv32k_ick@2a38 { + clkdiv32k_ick: clock-clkdiv32k-ick-8@2a38 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "clkdiv32k_ick"; clocks = <&clkdiv32k_ck>; ti,bit-shift = <8>; reg = <0x2a38>; }; - sysclk_div: sysclk_div { + sysclk_div: clock-sysclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sysclk_div"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - pruss_ocp_gclk: pruss_ocp_gclk@4248 { + pruss_ocp_gclk: clock-pruss-ocp-gclk@4248 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "pruss_ocp_gclk"; clocks = <&sysclk_div>, <&dpll_disp_m2_ck>; reg = <0x4248>; }; - clk_32k_tpm_ck: clk_32k_tpm_ck { + clk_32k_tpm_ck: clock-clk-32k-tpm { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32k_tpm_ck"; clock-frequency = <32768>; }; - timer1_fck: timer1_fck@4200 { + timer1_fck: clock-timer1-fck@4200 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer1_fck"; clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>; reg = <0x4200>; }; - timer2_fck: timer2_fck@4204 { + timer2_fck: clock-timer2-fck@4204 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer2_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4204>; }; - timer3_fck: timer3_fck@4208 { + timer3_fck: clock-timer3-fck@4208 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer3_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4208>; }; - timer4_fck: timer4_fck@420c { + timer4_fck: clock-timer4-fck@420c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer4_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x420c>; }; - timer5_fck: timer5_fck@4210 { + timer5_fck: clock-timer5-fck@4210 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer5_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4210>; }; - timer6_fck: timer6_fck@4214 { + timer6_fck: clock-timer6-fck@4214 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer6_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4214>; }; - timer7_fck: timer7_fck@4218 { + timer7_fck: clock-timer7-fck@4218 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer7_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4218>; }; - wdt1_fck: wdt1_fck@422c { + wdt1_fck: clock-wdt1-fck@422c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wdt1_fck"; clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>; reg = <0x422c>; }; @@ -451,125 +507,141 @@ reg = <0x424c>; }; - l3_gclk: l3_gclk { + l3_gclk: clock-l3-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_core_m4_div2_ck: dpll_core_m4_div2_ck { + dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_core_m4_div2_ck"; clocks = <&sysclk_div>; clock-mult = <1>; clock-div = <2>; }; - l4hs_gclk: l4hs_gclk { + l4hs_gclk: clock-l4hs-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4hs_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - l3s_gclk: l3s_gclk { + l3s_gclk: clock-l3s-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3s_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - l4ls_gclk: l4ls_gclk { + l4ls_gclk: clock-l4ls-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4ls_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - cpsw_125mhz_gclk: cpsw_125mhz_gclk { + cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_125mhz_gclk"; clocks = <&dpll_core_m5_ck>; clock-mult = <1>; clock-div = <2>; }; - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 { + cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@4238 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "cpsw_cpts_rft_clk"; clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>; reg = <0x4238>; }; - dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 { + dpll_clksel_mac_clk: clock-dpll-clksel-mac-2@4234 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_clksel_mac_clk"; clocks = <&dpll_core_m5_ck>; reg = <0x4234>; ti,bit-shift = <2>; ti,dividers = <2>, <5>; }; - clk_32k_mosc_ck: clk_32k_mosc_ck { + clk_32k_mosc_ck: clock-clk-32k-mosc { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32k_mosc_ck"; clock-frequency = <32768>; }; - gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 { + gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@4240 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpio0_dbclk_mux_ck"; clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>; reg = <0x4240>; }; - mmc_clk: mmc_clk { + mmc_clk: clock-mmc { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mmc_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c { + gfx_fclk_clksel_ck: clock-gfx-fclk-clksel-1@423c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gfx_fclk_clksel_ck"; clocks = <&sysclk_div>, <&dpll_per_m2_ck>; ti,bit-shift = <1>; reg = <0x423c>; }; - gfx_fck_div_ck: gfx_fck_div_ck@423c { + gfx_fck_div_ck: clock-gfx-fck-div@423c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "gfx_fck_div_ck"; clocks = <&gfx_fclk_clksel_ck>; reg = <0x423c>; ti,max-div = <2>; }; - disp_clk: disp_clk@4244 { + disp_clk: clock-disp@4244 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "disp_clk"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; reg = <0x4244>; ti,set-rate-parent; }; - dpll_extdev_ck: dpll_extdev_ck@2e60 { + dpll_extdev_ck: clock@2e60 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_extdev_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>; }; - dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 { + dpll_extdev_m2_ck: clock-dpll-extdev-m2-8@2e70 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_extdev_m2_ck"; clocks = <&dpll_extdev_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -578,66 +650,75 @@ ti,invert-autoidle-bit; }; - mux_synctimer32k_ck: mux_synctimer32k_ck@4230 { + mux_synctimer32k_ck: clock-mux-synctimer32k@4230 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "mux_synctimer32k_ck"; clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>; reg = <0x4230>; }; - timer8_fck: timer8_fck@421c { + timer8_fck: clock-timer8-fck@421c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer8_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x421c>; }; - timer9_fck: timer9_fck@4220 { + timer9_fck: clock-timer9-fck@4220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer9_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4220>; }; - timer10_fck: timer10_fck@4224 { + timer10_fck: clock-timer10-fck@4224 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer10_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4224>; }; - timer11_fck: timer11_fck@4228 { + timer11_fck: clock-timer11-fck@4228 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer11_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4228>; }; - cpsw_50m_clkdiv: cpsw_50m_clkdiv { + cpsw_50m_clkdiv: clock-cpsw-50m-clkdiv { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_50m_clkdiv"; clocks = <&dpll_core_m5_ck>; clock-mult = <1>; clock-div = <1>; }; - cpsw_5m_clkdiv: cpsw_5m_clkdiv { + cpsw_5m_clkdiv: clock-cpsw-5m-clkdiv { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_5m_clkdiv"; clocks = <&cpsw_50m_clkdiv>; clock-mult = <1>; clock-div = <10>; }; - dpll_ddr_x2_ck: dpll_ddr_x2_ck { + dpll_ddr_x2_ck: clock-dpll-ddr-x2 { #clock-cells = <0>; compatible = "ti,am3-dpll-x2-clock"; + clock-output-names = "dpll_ddr_x2_ck"; clocks = <&dpll_ddr_ck>; }; - dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 { + dpll_ddr_m4_ck: clock-dpll-ddr-m4-8@2db8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m4_ck"; clocks = <&dpll_ddr_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -646,9 +727,10 @@ ti,invert-autoidle-bit; }; - dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 { + dpll_per_clkdcoldo: clock-dpll-per-clkdcoldo-8@2e14 { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; + clock-output-names = "dpll_per_clkdcoldo"; clocks = <&dpll_per_ck>; ti,clock-mult = <1>; ti,clock-div = <1>; @@ -657,91 +739,102 @@ ti,invert-autoidle-bit; }; - dll_aging_clk_div: dll_aging_clk_div@4250 { + dll_aging_clk_div: clock-dll-aging-clk-div@4250 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dll_aging_clk_div"; clocks = <&sys_clkin_ck>; reg = <0x4250>; ti,dividers = <8>, <16>, <32>; }; - div_core_25m_ck: div_core_25m_ck { + div_core_25m_ck: clock-div-core-25m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "div_core_25m_ck"; clocks = <&sysclk_div>; clock-mult = <1>; clock-div = <8>; }; - func_12m_clk: func_12m_clk { + func_12m_clk: clock-func-12m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <16>; }; - vtp_clk_div: vtp_clk_div { + vtp_clk_div: clock-vtp-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "vtp_clk_div"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <2>; }; - usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 { + usbphy_32khz_clkmux: clock-usbphy-32khz-clkmux@4260 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "usbphy_32khz_clkmux"; clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>; reg = <0x4260>; }; - usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 { + usb_phy0_always_on_clk32k: clock-usb-phy0-always-on-clk32k-8@2a40 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy0_always_on_clk32k"; clocks = <&usbphy_32khz_clkmux>; ti,bit-shift = <8>; reg = <0x2a40>; }; - usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 { + usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@2a48 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy1_always_on_clk32k"; clocks = <&usbphy_32khz_clkmux>; ti,bit-shift = <8>; reg = <0x2a48>; }; - clkout1_osc_div_ck: clkout1-osc-div-ck { + clkout1_osc_div_ck: clock-clkout1-osc-div-ck { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "clkout1_osc_div_ck"; clocks = <&sys_clkin_ck>; ti,bit-shift = <20>; ti,max-div = <4>; reg = <0x4100>; }; - clkout1_src2_mux_ck: clkout1-src2-mux-ck { + clkout1_src2_mux_ck: clock-clkout1-src2-mux-ck { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkout1_src2_mux_ck"; clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, <&dpll_mpu_m2_ck>; reg = <0x4100>; }; - clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck { + clkout1_src2_pre_div_ck: clock-clkout1-src2-pre-div-ck { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "clkout1_src2_pre_div_ck"; clocks = <&clkout1_src2_mux_ck>; ti,bit-shift = <4>; ti,max-div = <8>; reg = <0x4100>; }; - clkout1_src2_post_div_ck: clkout1-src2-post-div-ck { + clkout1_src2_post_div_ck: clock-clkout1-src2-post-div-ck { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "clkout1_src2_post_div_ck"; clocks = <&clkout1_src2_pre_div_ck>; ti,bit-shift = <8>; ti,max-div = <32>; @@ -749,18 +842,20 @@ reg = <0x4100>; }; - clkout1_mux_ck: clkout1-mux-ck { + clkout1_mux_ck: clock-clkout1-mux-ck { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkout1_mux_ck"; clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>, <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>; ti,bit-shift = <16>; reg = <0x4100>; }; - clkout1_ck: clkout1-ck { + clkout1_ck: clock-clkout1-ck { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "clkout1_ck"; clocks = <&clkout1_mux_ck>; ti,bit-shift = <23>; reg = <0x4100>; @@ -768,120 +863,138 @@ }; &prcm { - wkup_cm: wkup-cm@2800 { + wkup_cm: clock@2800 { compatible = "ti,omap4-cm"; + clock-output-names = "wkup_cm"; reg = <0x2800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x2800 0x400>; - l3s_tsc_clkctrl: l3s-tsc-clkctrl@120 { + l3s_tsc_clkctrl: clock@120 { compatible = "ti,clkctrl"; + clock-output-names = "l3s_tsc_clkctrl"; reg = <0x120 0x4>; #clock-cells = <2>; }; - l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@228 { + l4_wkup_aon_clkctrl: clock@228 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_aon_clkctrl"; reg = <0x228 0xc>; #clock-cells = <2>; }; - l4_wkup_clkctrl: l4-wkup-clkctrl@220 { + l4_wkup_clkctrl: clock@220 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_clkctrl"; reg = <0x220 0x4>, <0x328 0x44>; #clock-cells = <2>; }; }; - mpu_cm: mpu-cm@8300 { + mpu_cm: clock@8300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x8300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8300 0x100>; - mpu_clkctrl: mpu-clkctrl@20 { + mpu_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - gfx_l3_cm: gfx-l3-cm@8400 { + gfx_l3_cm: clock@8400 { compatible = "ti,omap4-cm"; + clock-output-names = "gfx_l3_cm"; reg = <0x8400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8400 0x100>; - gfx_l3_clkctrl: gfx-l3-clkctrl@20 { + gfx_l3_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "gfx_l3_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - l4_rtc_cm: l4-rtc-cm@8500 { + l4_rtc_cm: clock@8500 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_rtc_cm"; reg = <0x8500 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8500 0x100>; - l4_rtc_clkctrl: l4-rtc-clkctrl@20 { + l4_rtc_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_rtc_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - per_cm: per-cm@8800 { + per_cm: clock@8800 { compatible = "ti,omap4-cm"; + clock-output-names = "per_cm"; reg = <0x8800 0xc00>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8800 0xc00>; - l3_clkctrl: l3-clkctrl@20 { + l3_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_clkctrl"; reg = <0x20 0x3c>, <0x78 0x2c>; #clock-cells = <2>; }; - l3s_clkctrl: l3s-clkctrl@68 { + l3s_clkctrl: clock@68 { compatible = "ti,clkctrl"; + clock-output-names = "l3s_clkctrl"; reg = <0x68 0xc>, <0x220 0x4c>; #clock-cells = <2>; }; - pruss_ocp_clkctrl: pruss-ocp-clkctrl@320 { + pruss_ocp_clkctrl: clock@320 { compatible = "ti,clkctrl"; + clock-output-names = "pruss_ocp_clkctrl"; reg = <0x320 0x4>; #clock-cells = <2>; }; - l4ls_clkctrl: l4ls-clkctrl@420 { + l4ls_clkctrl: clock@420 { compatible = "ti,clkctrl"; + clock-output-names = "l4ls_clkctrl"; reg = <0x420 0x1a4>; #clock-cells = <2>; }; - emif_clkctrl: emif-clkctrl@720 { + emif_clkctrl: clock@720 { compatible = "ti,clkctrl"; + clock-output-names = "emif_clkctrl"; reg = <0x720 0x4>; #clock-cells = <2>; }; - dss_clkctrl: dss-clkctrl@a20 { + dss_clkctrl: clock@a20 { compatible = "ti,clkctrl"; + clock-output-names = "dss_clkctrl"; reg = <0xa20 0x4>; #clock-cells = <2>; }; - cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@b20 { + cpsw_125mhz_clkctrl: clock@b20 { compatible = "ti,clkctrl"; + clock-output-names = "cpsw_125mhz_clkctrl"; reg = <0xb20 0x4>; #clock-cells = <2>; }; diff --git a/dts/src/arm/am574x-idk.dts b/dts/src/arm/am574x-idk.dts index 6dff3660bf..47b9174d23 100644 --- a/dts/src/arm/am574x-idk.dts +++ b/dts/src/arm/am574x-idk.dts @@ -18,7 +18,7 @@ &qspi { spi-max-frequency = <96000000>; - m25p80@0 { + flash@0 { spi-max-frequency = <96000000>; }; }; diff --git a/dts/src/arm/am57xx-cl-som-am57x.dts b/dts/src/arm/am57xx-cl-som-am57x.dts index 2e94f32d9d..2fc9a5d5e0 100644 --- a/dts/src/arm/am57xx-cl-som-am57x.dts +++ b/dts/src/arm/am57xx-cl-som-am57x.dts @@ -491,7 +491,7 @@ spi-max-frequency = <48000000>; - spi_flash: spi_flash@0 { + spi_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,m25p80", "jedec,spi-nor"; diff --git a/dts/src/arm/am57xx-idk-common.dtsi b/dts/src/arm/am57xx-idk-common.dtsi index 9fcb8944aa..c06eda8172 100644 --- a/dts/src/arm/am57xx-idk-common.dtsi +++ b/dts/src/arm/am57xx-idk-common.dtsi @@ -526,7 +526,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1", "jedec,spi-nor"; spi-max-frequency = <76800000>; reg = <0>; diff --git a/dts/src/arm/armada-370-db.dts b/dts/src/arm/armada-370-db.dts index 77261a2fb9..a7dc4c04d1 100644 --- a/dts/src/arm/armada-370-db.dts +++ b/dts/src/arm/armada-370-db.dts @@ -203,7 +203,7 @@ pinctrl-names = "default"; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "mx25l25635e", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-370-seagate-personal-cloud.dtsi b/dts/src/arm/armada-370-seagate-personal-cloud.dtsi index a624b2371f..0abac5ffe4 100644 --- a/dts/src/arm/armada-370-seagate-personal-cloud.dtsi +++ b/dts/src/arm/armada-370-seagate-personal-cloud.dtsi @@ -159,7 +159,7 @@ pinctrl-0 = <&spi0_pins2>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; /* MX25L8006E */ diff --git a/dts/src/arm/armada-370-synology-ds213j.dts b/dts/src/arm/armada-370-synology-ds213j.dts index 64f2ce254f..e72b8ed4b9 100644 --- a/dts/src/arm/armada-370-synology-ds213j.dts +++ b/dts/src/arm/armada-370-synology-ds213j.dts @@ -258,7 +258,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q064", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-375-db.dts b/dts/src/arm/armada-375-db.dts index 0e679465cb..4c4092790a 100644 --- a/dts/src/arm/armada-375-db.dts +++ b/dts/src/arm/armada-375-db.dts @@ -64,7 +64,7 @@ status = "disabled"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-381-netgear-gs110emx.dts b/dts/src/arm/armada-381-netgear-gs110emx.dts index 0a961116a1..396172067f 100644 --- a/dts/src/arm/armada-381-netgear-gs110emx.dts +++ b/dts/src/arm/armada-381-netgear-gs110emx.dts @@ -242,7 +242,7 @@ pinctrl-names = "default"; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm/armada-385-atl-x530.dts b/dts/src/arm/armada-385-atl-x530.dts index ed3f41c7df..241f5d7c80 100644 --- a/dts/src/arm/armada-385-atl-x530.dts +++ b/dts/src/arm/armada-385-atl-x530.dts @@ -168,7 +168,7 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; - spi-flash@1 { + flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm/armada-385-clearfog-gtr.dtsi b/dts/src/arm/armada-385-clearfog-gtr.dtsi index 624bbcae68..10ad46f293 100644 --- a/dts/src/arm/armada-385-clearfog-gtr.dtsi +++ b/dts/src/arm/armada-385-clearfog-gtr.dtsi @@ -365,7 +365,7 @@ pinctrl-names = "default"; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; compatible = "w25q32", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-385-db-88f6820-amc.dts b/dts/src/arm/armada-385-db-88f6820-amc.dts index 7881df3b28..389d9c75d5 100644 --- a/dts/src/arm/armada-385-db-88f6820-amc.dts +++ b/dts/src/arm/armada-385-db-88f6820-amc.dts @@ -126,7 +126,7 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm/armada-385-db-ap.dts b/dts/src/arm/armada-385-db-ap.dts index 0e4613bb56..332f8fce77 100644 --- a/dts/src/arm/armada-385-db-ap.dts +++ b/dts/src/arm/armada-385-db-ap.dts @@ -192,7 +192,7 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p128", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-385-synology-ds116.dts b/dts/src/arm/armada-385-synology-ds116.dts index d8769956cb..2622af73c9 100644 --- a/dts/src/arm/armada-385-synology-ds116.dts +++ b/dts/src/arm/armada-385-synology-ds116.dts @@ -223,7 +223,7 @@ pinctrl-0 = <&spi0_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "macronix,mx25l6405d", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-385-turris-omnia.dts b/dts/src/arm/armada-385-turris-omnia.dts index f240018148..f4878df397 100644 --- a/dts/src/arm/armada-385-turris-omnia.dts +++ b/dts/src/arm/armada-385-turris-omnia.dts @@ -348,7 +348,11 @@ #size-cells = <0>; reg = <5>; - /* ATSHA204A at address 0x64 */ + /* ATSHA204A-MAHDA-T crypto module */ + crypto@64 { + compatible = "atmel,atsha204a"; + reg = <0x64>; + }; }; i2c@6 { @@ -485,7 +489,7 @@ pinctrl-0 = <&spi0_pins &spi0cs0_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "spansion,s25fl164k", "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/armada-388-db.dts b/dts/src/arm/armada-388-db.dts index a2bec07bf4..5130eccc32 100644 --- a/dts/src/arm/armada-388-db.dts +++ b/dts/src/arm/armada-388-db.dts @@ -133,7 +133,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "w25q32", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-388-gp.dts b/dts/src/arm/armada-388-gp.dts index 9d873257ac..e2ba50520b 100644 --- a/dts/src/arm/armada-388-gp.dts +++ b/dts/src/arm/armada-388-gp.dts @@ -395,7 +395,7 @@ pinctrl-0 = <&spi0_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p128", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-388-rd.dts b/dts/src/arm/armada-388-rd.dts index 328a4d6afd..c0efafd45b 100644 --- a/dts/src/arm/armada-388-rd.dts +++ b/dts/src/arm/armada-388-rd.dts @@ -97,7 +97,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p128", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-38x-solidrun-microsom.dtsi b/dts/src/arm/armada-38x-solidrun-microsom.dtsi index 363ac42388..2c64bc6e5a 100644 --- a/dts/src/arm/armada-38x-solidrun-microsom.dtsi +++ b/dts/src/arm/armada-38x-solidrun-microsom.dtsi @@ -101,7 +101,7 @@ /* The microsom has an optional W25Q32 on board, connected to CS0 */ pinctrl-0 = <&spi1_pins>; - w25q32: spi-flash@0 { + w25q32: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "w25q32", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-390-db.dts b/dts/src/arm/armada-390-db.dts index 0e29474ae9..792d0a0184 100644 --- a/dts/src/arm/armada-390-db.dts +++ b/dts/src/arm/armada-390-db.dts @@ -81,7 +81,7 @@ pinctrl-0 = <&spi1_pins>; pinctrl-names = "default"; - spi-flash@1 { + flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", diff --git a/dts/src/arm/armada-398-db.dts b/dts/src/arm/armada-398-db.dts index fc28308e5b..ec6cdbeedd 100644 --- a/dts/src/arm/armada-398-db.dts +++ b/dts/src/arm/armada-398-db.dts @@ -79,7 +79,7 @@ pinctrl-0 = <&spi1_pins>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-xp-axpwifiap.dts b/dts/src/arm/armada-xp-axpwifiap.dts index 606fd3476a..3e77b43378 100644 --- a/dts/src/arm/armada-xp-axpwifiap.dts +++ b/dts/src/arm/armada-xp-axpwifiap.dts @@ -134,7 +134,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-xp-crs305-1g-4s-bit.dts b/dts/src/arm/armada-xp-crs305-1g-4s-bit.dts index a022c68dc9..c28e140b4a 100644 --- a/dts/src/arm/armada-xp-crs305-1g-4s-bit.dts +++ b/dts/src/arm/armada-xp-crs305-1g-4s-bit.dts @@ -15,7 +15,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm/armada-xp-crs305-1g-4s.dtsi b/dts/src/arm/armada-xp-crs305-1g-4s.dtsi index 32fb21b2bf..47b003a81b 100644 --- a/dts/src/arm/armada-xp-crs305-1g-4s.dtsi +++ b/dts/src/arm/armada-xp-crs305-1g-4s.dtsi @@ -80,7 +80,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm/armada-xp-crs326-24g-2s-bit.dts b/dts/src/arm/armada-xp-crs326-24g-2s-bit.dts index 21f442afab..20ba5c823b 100644 --- a/dts/src/arm/armada-xp-crs326-24g-2s-bit.dts +++ b/dts/src/arm/armada-xp-crs326-24g-2s-bit.dts @@ -15,7 +15,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm/armada-xp-crs326-24g-2s.dtsi b/dts/src/arm/armada-xp-crs326-24g-2s.dtsi index f3e1a25ca5..cab99d8e29 100644 --- a/dts/src/arm/armada-xp-crs326-24g-2s.dtsi +++ b/dts/src/arm/armada-xp-crs326-24g-2s.dtsi @@ -80,7 +80,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm/armada-xp-crs328-4c-20s-4s-bit.dts b/dts/src/arm/armada-xp-crs328-4c-20s-4s-bit.dts index e05aee6cdc..2caa3980fd 100644 --- a/dts/src/arm/armada-xp-crs328-4c-20s-4s-bit.dts +++ b/dts/src/arm/armada-xp-crs328-4c-20s-4s-bit.dts @@ -15,7 +15,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm/armada-xp-crs328-4c-20s-4s.dtsi b/dts/src/arm/armada-xp-crs328-4c-20s-4s.dtsi index c8b1355ce1..7028482ce4 100644 --- a/dts/src/arm/armada-xp-crs328-4c-20s-4s.dtsi +++ b/dts/src/arm/armada-xp-crs328-4c-20s-4s.dtsi @@ -80,7 +80,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm/armada-xp-db-dxbc2.dts b/dts/src/arm/armada-xp-db-dxbc2.dts index 8a3aa616bb..02bef8dc42 100644 --- a/dts/src/arm/armada-xp-db-dxbc2.dts +++ b/dts/src/arm/armada-xp-db-dxbc2.dts @@ -93,7 +93,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64"; diff --git a/dts/src/arm/armada-xp-db-xc3-24g4xg.dts b/dts/src/arm/armada-xp-db-xc3-24g4xg.dts index 4ec0ae01b6..d1b61dad0c 100644 --- a/dts/src/arm/armada-xp-db-xc3-24g4xg.dts +++ b/dts/src/arm/armada-xp-db-xc3-24g4xg.dts @@ -89,7 +89,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64"; diff --git a/dts/src/arm/armada-xp-db.dts b/dts/src/arm/armada-xp-db.dts index 5d04dc68cf..75318fd0fc 100644 --- a/dts/src/arm/armada-xp-db.dts +++ b/dts/src/arm/armada-xp-db.dts @@ -235,7 +235,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-xp-gp.dts b/dts/src/arm/armada-xp-gp.dts index b4cca507cf..d1d348b91c 100644 --- a/dts/src/arm/armada-xp-gp.dts +++ b/dts/src/arm/armada-xp-gp.dts @@ -220,7 +220,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/dts/src/arm/armada-xp-linksys-mamba.dts b/dts/src/arm/armada-xp-linksys-mamba.dts index 8480a16919..36932e3b78 100644 --- a/dts/src/arm/armada-xp-linksys-mamba.dts +++ b/dts/src/arm/armada-xp-linksys-mamba.dts @@ -255,7 +255,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "everspin,mr25h256"; diff --git a/dts/src/arm/armada-xp-synology-ds414.dts b/dts/src/arm/armada-xp-synology-ds414.dts index 809e821d73..5551bac196 100644 --- a/dts/src/arm/armada-xp-synology-ds414.dts +++ b/dts/src/arm/armada-xp-synology-ds414.dts @@ -274,7 +274,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q064", "jedec,spi-nor"; diff --git a/dts/src/arm/aspeed-ast2600-evb.dts b/dts/src/arm/aspeed-ast2600-evb.dts index b7eb552640..5a6063bd45 100644 --- a/dts/src/arm/aspeed-ast2600-evb.dts +++ b/dts/src/arm/aspeed-ast2600-evb.dts @@ -23,6 +23,26 @@ reg = <0x80000000 0x80000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + video_engine_memory: video { + size = <0x04000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + vcc_sdhci0: regulator-vcc-sdhci0 { compatible = "regulator-fixed"; regulator-name = "SDHCI0 Vcc"; @@ -103,7 +123,7 @@ &mac0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; phy-handle = <ðphy0>; pinctrl-names = "default"; @@ -114,7 +134,7 @@ &mac1 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; phy-handle = <ðphy1>; pinctrl-names = "default"; @@ -300,3 +320,18 @@ vqmmc-supply = <&vccq_sdhci1>; clk-phase-sd-hs = <7>, <200>; }; + +&vhub { + status = "okay"; + pinctrl-names = "default"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; diff --git a/dts/src/arm/aspeed-bmc-facebook-bletchley.dts b/dts/src/arm/aspeed-bmc-facebook-bletchley.dts index eaf1bc261e..41d2b1535d 100644 --- a/dts/src/arm/aspeed-bmc-facebook-bletchley.dts +++ b/dts/src/arm/aspeed-bmc-facebook-bletchley.dts @@ -51,26 +51,6 @@ }; }; - spi2_gpio: spi2-gpio { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>; - num-chipselects = <1>; - cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - m25p,fast-read; - label = "pnor"; - spi-max-frequency = <100000000>; - }; - }; - switchphy: ethernet-phy@0 { // Fixed link }; @@ -242,6 +222,19 @@ }; }; +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <50000000>; + }; +}; + &i2c0 { status = "okay"; ina230@45 { @@ -260,6 +253,17 @@ reg = <0x4f>; }; + sled1_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED1_SWD_MUX", "SLED1_XRES_SWD_N", + "SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN"; + }; + sled1_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; @@ -310,6 +314,11 @@ op-sink-microwatt = <10000000>; }; }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; }; &i2c1 { @@ -330,6 +339,17 @@ reg = <0x4f>; }; + sled2_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED2_SWD_MUX", "SLED2_XRES_SWD_N", + "SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN"; + }; + sled2_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; @@ -380,6 +400,11 @@ op-sink-microwatt = <10000000>; }; }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; }; &i2c2 { @@ -400,6 +425,17 @@ reg = <0x4f>; }; + sled3_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED3_SWD_MUX", "SLED3_XRES_SWD_N", + "SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN"; + }; + sled3_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; @@ -450,6 +486,11 @@ op-sink-microwatt = <10000000>; }; }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; }; &i2c3 { @@ -470,6 +511,17 @@ reg = <0x4f>; }; + sled4_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED4_SWD_MUX", "SLED4_XRES_SWD_N", + "SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN"; + }; + sled4_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; @@ -520,6 +572,11 @@ op-sink-microwatt = <10000000>; }; }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; }; &i2c4 { @@ -540,6 +597,17 @@ reg = <0x4f>; }; + sled5_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED5_SWD_MUX", "SLED5_XRES_SWD_N", + "SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN"; + }; + sled5_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; @@ -590,6 +658,11 @@ op-sink-microwatt = <10000000>; }; }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; }; &i2c5 { @@ -610,6 +683,17 @@ reg = <0x4f>; }; + sled6_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED6_SWD_MUX", "SLED6_XRES_SWD_N", + "SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN"; + }; + sled6_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; @@ -660,6 +744,11 @@ op-sink-microwatt = <10000000>; }; }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; }; &i2c6 { @@ -732,6 +821,8 @@ compatible = "adi,adm1278"; reg = <0x11>; shunt-resistor-micro-ohms = <300>; + adi,volt-curr-sample-average = <128>; + adi,power-sample-average = <128>; }; tmp421@4c { @@ -771,43 +862,55 @@ &gpio0 { gpio-line-names = /*A0-A7*/ "","","","","","","","", - /*B0-B7*/ "","","SEL_SPI2_MUX","SPI2_MUX1", - "SPI2_MUX2","SPI2_MUX3","","", + /*B0-B7*/ "FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N", + "SEL_SPI2_MUX","SPI2_MUX1", + "SPI2_MUX2","SPI2_MUX3", + "","FUSB302_SLED3_INT_N", /*C0-C7*/ "","","","","","","","", /*D0-D7*/ "","","","","","","","", /*E0-E7*/ "","","","","","","","", - /*F0-F7*/ "","","","","","","","", - /*G0-G7*/ "BSM_FRU_WP","SWITCH_FRU_MUX","","", + /*F0-F7*/ "BMC_SLED1_STCK","BMC_SLED2_STCK", + "BMC_SLED3_STCK","BMC_SLED4_STCK", + "BMC_SLED5_STCK","BMC_SLED6_STCK", + "","", + /*G0-G7*/ "BSM_FRU_WP","SWITCH_FRU_MUX","","FM_SOL_UART_CH_SEL", "PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","", /*H0-H7*/ "presence-riser1","presence-riser2", "presence-sled1","presence-sled2", "presence-sled3","presence-sled4", "presence-sled5","presence-sled6", - /*I0-I7*/ "REV_ID0","","REV_ID1","REV_ID2", - "","BSM_FLASH_WP_STATUS","BMC_TPM_PRES","", + /*I0-I7*/ "REV_ID0","", + "REV_ID1","REV_ID2", + "","BSM_FLASH_WP_STATUS", + "BMC_TPM_PRES_N","FUSB302_SLED6_INT_N", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","", /*L0-L7*/ "","","","","","BMC_RTC_INT","","", - /*M0-M7*/ "ALERT_SLED1","ALERT_SLED2", - "ALERT_SLED3","ALERT_SLED4", - "ALERT_SLED5","ALERT_SLED6", - "P12V_AUX_ALERT1","", - /*N0-N7*/ "","","","","","","","", + /*M0-M7*/ "ALERT_SLED1_N","ALERT_SLED2_N", + "ALERT_SLED3_N","ALERT_SLED4_N", + "ALERT_SLED5_N","ALERT_SLED6_N", + "","", + /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1", + "LED_POSTCODE_2","LED_POSTCODE_3", + "LED_POSTCODE_4","LED_POSTCODE_5", + "LED_POSTCODE_5","LED_POSTCODE_7", /*O0-O7*/ "","","","", "","BOARD_ID0","BOARD_ID1","BOARD_ID2", /*P0-P7*/ "","","","","","","","BMC_HEARTBEAT", /*Q0-Q7*/ "","","","","","","","", /*R0-R7*/ "","","","","","","","", /*S0-S7*/ "","","","BAT_DETECT", - "BMC_BT_WP0","BMC_BT_WP1","","", + "BMC_BT_WP0_N","BMC_BT_WP1_N","","FUSB302_SLED4_INT_N", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", - /*V0-V7*/ "PWRGD_CNS_PSU","RST_BMC_MVL","","PSU_PRSNT", + /*V0-V7*/ "PWRGD_CNS_PSU","RST_BMC_MVL_N", + "P12V_AUX_ALERT1_N","PSU_PRSNT", "USB2_SEL0_A","USB2_SEL1_A", "USB2_SEL0_B","USB2_SEL1_B", - /*W0-W7*/ "RST_FRONT_IOEXP","","","","","","","", + /*W0-W7*/ "RST_FRONT_IOEXP_N","","","","","","","", /*X0-X7*/ "","","","","","","","", - /*Y0-Y7*/ "BMC_SELF_HW_RST","BSM_PRSNT","BSM_FLASH_LATCH","", + /*Y0-Y7*/ "BMC_SELF_HW_RST","BSM_PRSNT_N", + "BSM_FLASH_LATCH_N","FUSB302_SLED5_INT_N", "","","","", /*Z0-Z7*/ "","","","","","","",""; }; @@ -834,7 +937,16 @@ &pinctrl_adc14_default &pinctrl_adc15_default>; }; +&mdio0 { + status = "okay"; + /* TODO: Add Marvell 88E6191X */ +}; + &mdio3 { status = "okay"; /* TODO: Add Marvell 88X3310 */ }; + +&ehci0 { + status = "okay"; +}; diff --git a/dts/src/arm/aspeed-bmc-ibm-everest.dts b/dts/src/arm/aspeed-bmc-ibm-everest.dts index 578f9e2fc7..382da7934e 100644 --- a/dts/src/arm/aspeed-bmc-ibm-everest.dts +++ b/dts/src/arm/aspeed-bmc-ibm-everest.dts @@ -283,7 +283,7 @@ /*P0-P7*/ "","","","","led-pcieslot-power","","","", /*Q0-Q7*/ "","","regulator-standby-faulted","","","","","", /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","", - /*S0-S7*/ "","","","","","","","", + /*S0-S7*/ "","","","","power-ffs-sync-history","","","", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", /*V0-V7*/ "","BMC_3RESTART_ATTEMPT_P","","","","","","", diff --git a/dts/src/arm/aspeed-bmc-ibm-rainier.dts b/dts/src/arm/aspeed-bmc-ibm-rainier.dts index 528b49e2c0..7213434695 100644 --- a/dts/src/arm/aspeed-bmc-ibm-rainier.dts +++ b/dts/src/arm/aspeed-bmc-ibm-rainier.dts @@ -265,7 +265,7 @@ /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","", /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", - "","","","", + "power-ffs-sync-history","","","", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", /*V0-V7*/ "","","","","","","","", diff --git a/dts/src/arm/aspeed-bmc-nuvia-dc-scm.dts b/dts/src/arm/aspeed-bmc-nuvia-dc-scm.dts new file mode 100644 index 0000000000..f4a97cfb0f --- /dev/null +++ b/dts/src/arm/aspeed-bmc-nuvia-dc-scm.dts @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved. + +/dts-v1/; + +#include "aspeed-g6.dtsi" + +/ { + model = "Nuvia DC-SCM BMC"; + compatible = "nuvia,dc-scm-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; +}; + +&mdio3 { + status = "okay"; + + ethphy3: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mac2 { + status = "okay"; + + /* Bootloader sets up the MAC to insert delay */ + phy-mode = "rgmii"; + phy-handle = <ðphy3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii3_default>; +}; + +&mac3 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + + use-ncsi; +}; + +&rtc { + status = "okay"; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <133000000>; +#include "openbmc-flash-layout-64.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <133000000>; +#include "openbmc-flash-layout-64-alt.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bios"; + spi-max-frequency = <133000000>; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "BMC_FLASH_MUX_SEL","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "BMC_FWSPI_RST_N","","GPIO_1_BMC_3V3","","","","","", + /*O0-O7*/ "JTAG_MUX_A","JTAG_MUX_B","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","SCMFPGA_SPARE_GPIO1_3V3", + "SCMFPGA_SPARE_GPIO2_3V3","SCMFPGA_SPARE_GPIO3_3V3", + "SCMFPGA_SPARE_GPIO4_3V3","SCMFPGA_SPARE_GPIO5_3V3", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + +&gpio1 { + gpio-line-names = + /*A0-A7*/ "GPI_1_BMC_1V8","","","","","", + "SCMFPGA_SPARE_GPIO1_1V8","SCMFPGA_SPARE_GPIO2_1V8", + /*B0-B7*/ "SCMFPGA_SPARE_GPIO3_1V8","SCMFPGA_SPARE_GPIO4_1V8", + "SCMFPGA_SPARE_GPIO5_1V8","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","BMC_SPI1_RST_N","BIOS_FLASH_MUX_SEL","", + "","TPM2_PIRQ_N","TPM2_RST_N","", + /*E0-E7*/ "","","","","","","",""; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; diff --git a/dts/src/arm/aspeed-g4.dtsi b/dts/src/arm/aspeed-g4.dtsi index fa8b581c3d..530491ae5e 100644 --- a/dts/src/arm/aspeed-g4.dtsi +++ b/dts/src/arm/aspeed-g4.dtsi @@ -54,8 +54,7 @@ ranges; fmc: spi@1e620000 { - reg = < 0x1e620000 0x94 - 0x20000000 0x10000000 >; + reg = <0x1e620000 0x94>, <0x20000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2400-fmc"; @@ -65,34 +64,42 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@3 { reg = < 3 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@4 { reg = < 4 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; + spi-max-frequency = <50000000>; status = "disabled"; }; }; spi: spi@1e630000 { - reg = < 0x1e630000 0x18 - 0x30000000 0x10000000 >; + reg = <0x1e630000 0x18>, <0x30000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2400-spi"; @@ -102,6 +109,7 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; diff --git a/dts/src/arm/aspeed-g5.dtsi b/dts/src/arm/aspeed-g5.dtsi index 4147b397c8..c89092c390 100644 --- a/dts/src/arm/aspeed-g5.dtsi +++ b/dts/src/arm/aspeed-g5.dtsi @@ -55,8 +55,7 @@ ranges; fmc: spi@1e620000 { - reg = < 0x1e620000 0xc4 - 0x20000000 0x10000000 >; + reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-fmc"; @@ -67,25 +66,27 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; spi1: spi@1e630000 { - reg = < 0x1e630000 0xc4 - 0x30000000 0x08000000 >; + reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-spi"; @@ -95,19 +96,20 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; spi2: spi@1e631000 { - reg = < 0x1e631000 0xc4 - 0x38000000 0x08000000 >; + reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-spi"; @@ -117,12 +119,14 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; diff --git a/dts/src/arm/aspeed-g6.dtsi b/dts/src/arm/aspeed-g6.dtsi index 9d2a0ce4ca..6660564855 100644 --- a/dts/src/arm/aspeed-g6.dtsi +++ b/dts/src/arm/aspeed-g6.dtsi @@ -95,8 +95,7 @@ }; fmc: spi@1e620000 { - reg = < 0x1e620000 0xc4 - 0x20000000 0x10000000 >; + reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2600-fmc"; @@ -107,25 +106,27 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; spi1: spi@1e630000 { - reg = < 0x1e630000 0xc4 - 0x30000000 0x10000000 >; + reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2600-spi"; @@ -135,19 +136,20 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; spi2: spi@1e631000 { - reg = < 0x1e631000 0xc4 - 0x50000000 0x10000000 >; + reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2600-spi"; @@ -157,18 +159,21 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; @@ -181,6 +186,7 @@ status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mdio1_default>; + resets = <&syscon ASPEED_RESET_MII>; }; mdio1: mdio@1e650008 { @@ -191,6 +197,7 @@ status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mdio2_default>; + resets = <&syscon ASPEED_RESET_MII>; }; mdio2: mdio@1e650010 { @@ -201,6 +208,7 @@ status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mdio3_default>; + resets = <&syscon ASPEED_RESET_MII>; }; mdio3: mdio@1e650018 { @@ -211,6 +219,7 @@ status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mdio4_default>; + resets = <&syscon ASPEED_RESET_MII>; }; mac0: ftgmac@1e660000 { @@ -298,6 +307,16 @@ status = "disabled"; }; + udc: usb@1e6a2000 { + compatible = "aspeed,ast2600-udc"; + reg = <0x1e6a2000 0x300>; + interrupts = ; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bd_default>; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -351,6 +370,17 @@ quality = <100>; }; + gfx: display@1e6e6000 { + compatible = "aspeed,ast2600-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; + reg-io-width = <4>; + clocks = <&syscon ASPEED_CLK_GATE_D1CLK>; + resets = <&syscon ASPEED_RESET_GRAPHICS>; + syscon = <&syscon>; + status = "disabled"; + interrupts = ; + }; + xdma: xdma@1e6e7000 { compatible = "aspeed,ast2600-xdma"; reg = <0x1e6e7000 0x100>; diff --git a/dts/src/arm/at91-sama7g5ek.dts b/dts/src/arm/at91-sama7g5ek.dts index d83f76a6cd..103544620f 100644 --- a/dts/src/arm/at91-sama7g5ek.dts +++ b/dts/src/arm/at91-sama7g5ek.dts @@ -14,6 +14,7 @@ #include #include #include +#include / { model = "Microchip SAMA7G5-EK"; @@ -456,7 +457,7 @@ &pinctrl_gmac1_mdio_default &pinctrl_gmac1_phy_irq>; phy-mode = "rmii"; - status = "okay"; + status = "okay"; /* Conflict with pdmc0. */ ethernet-phy@0 { reg = <0x0>; @@ -470,6 +471,17 @@ pinctrl-0 = <&pinctrl_i2s0_default>; }; +&pdmc0 { + #sound-dai-cells = <0>; + microchip,mic-pos = , /* MIC 1 */ + , /* MIC 2 */ + , /* MIC 3 */ + ; /* MIC 4 */ + status = "disabled"; /* Conflict with gmac1. */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdmc0_default>; +}; + &pioA { pinctrl_can0_default: can0_default { @@ -639,6 +651,13 @@ bias-disable; }; + pinctrl_pdmc0_default: pdmc0_default { + pinmux = , + , + ; + bias_disable; + }; + pinctrl_qspi: qspi { pinmux = , , diff --git a/dts/src/arm/at91sam9261ek.dts b/dts/src/arm/at91sam9261ek.dts index 8f11c0b7d7..6fb4fe49cf 100644 --- a/dts/src/arm/at91sam9261ek.dts +++ b/dts/src/arm/at91sam9261ek.dts @@ -178,6 +178,10 @@ status = "okay"; }; + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + }; + watchdog@fffffd40 { status = "okay"; }; diff --git a/dts/src/arm/at91sam9263ek.dts b/dts/src/arm/at91sam9263ek.dts index 42e7340202..e732565913 100644 --- a/dts/src/arm/at91sam9263ek.dts +++ b/dts/src/arm/at91sam9263ek.dts @@ -102,6 +102,10 @@ }; }; + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + }; + watchdog@fffffd40 { status = "okay"; }; diff --git a/dts/src/arm/at91sam9rlek.dts b/dts/src/arm/at91sam9rlek.dts index d74b8d9d84..ddaadfec67 100644 --- a/dts/src/arm/at91sam9rlek.dts +++ b/dts/src/arm/at91sam9rlek.dts @@ -212,6 +212,10 @@ status = "okay"; }; + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + }; + rtc@fffffe00 { status = "okay"; }; diff --git a/dts/src/arm/bcm-cygnus.dtsi b/dts/src/arm/bcm-cygnus.dtsi index ad65be8719..f9f79ed825 100644 --- a/dts/src/arm/bcm-cygnus.dtsi +++ b/dts/src/arm/bcm-cygnus.dtsi @@ -397,8 +397,8 @@ #size-cells = <0>; interrupts = ; pinctrl-0 = <&spi_0>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -409,8 +409,8 @@ #size-cells = <0>; interrupts = ; pinctrl-0 = <&spi_1>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -421,8 +421,8 @@ #size-cells = <0>; interrupts = ; pinctrl-0 = <&spi_2>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; diff --git a/dts/src/arm/bcm2835-rpi-a-plus.dts b/dts/src/arm/bcm2835-rpi-a-plus.dts index 40b9405f1a..9b9a18bbb2 100644 --- a/dts/src/arm/bcm2835-rpi-a-plus.dts +++ b/dts/src/arm/bcm2835-rpi-a-plus.dts @@ -32,7 +32,6 @@ * This is based on the unreleased schematic for the Model A+. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -67,21 +66,21 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ + "", /* GPIO30 */ + "", /* GPIO31 */ "CAM_GPIO1", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ + "", /* GPIO33 */ + "", /* GPIO34 */ "PWR_LOW_N", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ + "", /* GPIO36 */ + "", /* GPIO37 */ "USB_LIMIT", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO39 */ "PWM0_OUT", /* GPIO40 */ "CAM_GPIO0", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", /* GPIO45 */ "HDMI_HPD_N", "STATUS_LED", diff --git a/dts/src/arm/bcm2835-rpi-a.dts b/dts/src/arm/bcm2835-rpi-a.dts index 11edb581db..f664e4fced 100644 --- a/dts/src/arm/bcm2835-rpi-a.dts +++ b/dts/src/arm/bcm2835-rpi-a.dts @@ -26,7 +26,6 @@ * RPI00021 sheet 02 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -42,41 +41,41 @@ "SPI_MISO", "SPI_MOSI", "SPI_SCLK", - "NC", /* GPIO12 */ - "NC", /* GPIO13 */ + "", /* GPIO12 */ + "", /* GPIO13 */ /* Serial port */ "TXD0", "RXD0", "STATUS_LED_N", "GPIO17", "GPIO18", - "NC", /* GPIO19 */ - "NC", /* GPIO20 */ + "", /* GPIO19 */ + "", /* GPIO20 */ "GPIO21", "GPIO22", "GPIO23", "GPIO24", "GPIO25", - "NC", /* GPIO26 */ + "", /* GPIO26 */ "CAM_GPIO0", /* Binary number representing build/revision */ "CONFIG0", "CONFIG1", "CONFIG2", "CONFIG3", - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ "PWM0_OUT", - "NC", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", "HDMI_HPD_P", "SD_CARD_DET", diff --git a/dts/src/arm/bcm2835-rpi-b-plus.dts b/dts/src/arm/bcm2835-rpi-b-plus.dts index 1b435c64bd..248feb2ed2 100644 --- a/dts/src/arm/bcm2835-rpi-b-plus.dts +++ b/dts/src/arm/bcm2835-rpi-b-plus.dts @@ -34,7 +34,6 @@ * RPI-BPLUS sheet 1 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -69,21 +68,21 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ + "", /* GPIO30 */ "LAN_RUN", /* GPIO31 */ "CAM_GPIO1", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ + "", /* GPIO33 */ + "", /* GPIO34 */ "PWR_LOW_N", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ + "", /* GPIO36 */ + "", /* GPIO37 */ "USB_LIMIT", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO39 */ "PWM0_OUT", /* GPIO40 */ "CAM_GPIO0", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "ETHCLK", /* GPIO44 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "ETH_CLK", /* GPIO44 */ "PWM1_OUT", /* GPIO45 */ "HDMI_HPD_N", "STATUS_LED", diff --git a/dts/src/arm/bcm2835-rpi-b-rev2.dts b/dts/src/arm/bcm2835-rpi-b-rev2.dts index a23c25c00e..f5b66d3f4f 100644 --- a/dts/src/arm/bcm2835-rpi-b-rev2.dts +++ b/dts/src/arm/bcm2835-rpi-b-rev2.dts @@ -27,7 +27,6 @@ * RPI00022 sheet 02 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -43,40 +42,40 @@ "SPI_MISO", "SPI_MOSI", "SPI_SCLK", - "NC", /* GPIO12 */ - "NC", /* GPIO13 */ + "", /* GPIO12 */ + "", /* GPIO13 */ /* Serial port */ "TXD0", "RXD0", "STATUS_LED_N", "GPIO17", "GPIO18", - "NC", /* GPIO19 */ - "NC", /* GPIO20 */ + "", /* GPIO19 */ + "", /* GPIO20 */ "CAM_GPIO", "GPIO22", "GPIO23", "GPIO24", "GPIO25", - "NC", /* GPIO26 */ + "", /* GPIO26 */ "GPIO27", "GPIO28", "GPIO29", "GPIO30", "GPIO31", - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ "PWM0_OUT", - "NC", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", "HDMI_HPD_P", "SD_CARD_DET", diff --git a/dts/src/arm/bcm2835-rpi-b.dts b/dts/src/arm/bcm2835-rpi-b.dts index 1b63d6b197..f589bede2b 100644 --- a/dts/src/arm/bcm2835-rpi-b.dts +++ b/dts/src/arm/bcm2835-rpi-b.dts @@ -27,7 +27,6 @@ * RPI00021 sheet 02 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -43,41 +42,40 @@ "SPI_MISO", "SPI_MOSI", "SPI_SCLK", - "NC", /* GPIO12 */ - "NC", /* GPIO13 */ + "", /* GPIO12 */ + "", /* GPIO13 */ /* Serial port */ "TXD0", "RXD0", "STATUS_LED_N", "GPIO17", "GPIO18", - "NC", /* GPIO19 */ - "NC", /* GPIO20 */ - "GPIO21", + "", /* GPIO19 */ + "", /* GPIO20 */ + "CAM_GPIO0", "GPIO22", "GPIO23", "GPIO24", "GPIO25", - "NC", /* GPIO26 */ - "CAM_GPIO0", - /* Binary number representing build/revision */ - "CONFIG0", - "CONFIG1", - "CONFIG2", - "CONFIG3", - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO26 */ + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ "PWM0_OUT", - "NC", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", "HDMI_HPD_P", "SD_CARD_DET", diff --git a/dts/src/arm/bcm2835-rpi-cm1-io1.dts b/dts/src/arm/bcm2835-rpi-cm1-io1.dts index a75c882e65..87958a96c3 100644 --- a/dts/src/arm/bcm2835-rpi-cm1-io1.dts +++ b/dts/src/arm/bcm2835-rpi-cm1-io1.dts @@ -13,7 +13,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ diff --git a/dts/src/arm/bcm2835-rpi-zero-w.dts b/dts/src/arm/bcm2835-rpi-zero-w.dts index 243236bc1e..596bb1ef99 100644 --- a/dts/src/arm/bcm2835-rpi-zero-w.dts +++ b/dts/src/arm/bcm2835-rpi-zero-w.dts @@ -39,7 +39,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -74,19 +73,21 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", "CAM_GPIO1", /* GPIO40 */ "WL_ON", /* GPIO41 */ - "NC", /* GPIO42 */ + "", /* GPIO42 */ "WIFI_CLK", /* GPIO43 */ "CAM_GPIO0", /* GPIO44 */ "BT_ON", /* GPIO45 */ diff --git a/dts/src/arm/bcm2835-rpi-zero.dts b/dts/src/arm/bcm2835-rpi-zero.dts index 6f9b3a908f..a65c2bca69 100644 --- a/dts/src/arm/bcm2835-rpi-zero.dts +++ b/dts/src/arm/bcm2835-rpi-zero.dts @@ -29,7 +29,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -64,22 +63,22 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ + "", /* GPIO30 */ + "", /* GPIO31 */ "CAM_GPIO1", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ - "NC", /* GPIO40 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ + "", /* GPIO40 */ "CAM_GPIO0", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ - "NC", /* GPIO45 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ + "", /* GPIO45 */ "HDMI_HPD_N", "STATUS_LED_N", /* Used by SD Card */ diff --git a/dts/src/arm/bcm2836-rpi-2-b.dts b/dts/src/arm/bcm2836-rpi-2-b.dts index d8af8eeac7..3635502b1e 100644 --- a/dts/src/arm/bcm2836-rpi-2-b.dts +++ b/dts/src/arm/bcm2836-rpi-2-b.dts @@ -34,7 +34,6 @@ * the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -83,7 +82,7 @@ "CAM_GPIO0", "SMPS_SCL", "SMPS_SDA", - "ETHCLK", + "ETH_CLK", "PWM1_OUT", "HDMI_HPD_N", "STATUS_LED", diff --git a/dts/src/arm/bcm2837-rpi-3-a-plus.dts b/dts/src/arm/bcm2837-rpi-3-a-plus.dts index d73daf5bff..f7222a2890 100644 --- a/dts/src/arm/bcm2837-rpi-3-a-plus.dts +++ b/dts/src/arm/bcm2837-rpi-3-a-plus.dts @@ -55,7 +55,6 @@ * This is mostly based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ diff --git a/dts/src/arm/bcm2837-rpi-3-b-plus.dts b/dts/src/arm/bcm2837-rpi-3-b-plus.dts index e12938baaf..ec721d323a 100644 --- a/dts/src/arm/bcm2837-rpi-3-b-plus.dts +++ b/dts/src/arm/bcm2837-rpi-3-b-plus.dts @@ -45,7 +45,7 @@ #gpio-cells = <2>; gpio-line-names = "BT_ON", "WL_ON", - "STATUS_LED_R", + "PWR_LED_R", "LAN_RUN", "", "CAM_GPIO0", @@ -61,7 +61,6 @@ * the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -110,7 +109,7 @@ "SD1_DATA3", "PWM0_OUT", "PWM1_OUT", - "ETHCLK", + "ETH_CLK", "WIFI_CLK", "SDA0", "SCL0", diff --git a/dts/src/arm/bcm2837-rpi-3-b.dts b/dts/src/arm/bcm2837-rpi-3-b.dts index 42b5383b55..fb6a417d73 100644 --- a/dts/src/arm/bcm2837-rpi-3-b.dts +++ b/dts/src/arm/bcm2837-rpi-3-b.dts @@ -54,7 +54,6 @@ * the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -103,7 +102,7 @@ "SD1_DATA3", "PWM0_OUT", "PWM1_OUT", - "ETHCLK", + "ETH_CLK", "WIFI_CLK", "SDA0", "SCL0", diff --git a/dts/src/arm/bcm2837-rpi-cm3-io3.dts b/dts/src/arm/bcm2837-rpi-cm3-io3.dts index 588d9411ce..cf84e69fce 100644 --- a/dts/src/arm/bcm2837-rpi-cm3-io3.dts +++ b/dts/src/arm/bcm2837-rpi-cm3-io3.dts @@ -13,7 +13,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -63,8 +62,8 @@ "GPIO43", "GPIO44", "GPIO45", - "GPIO46", - "GPIO47", + "SMPS_SCL", + "SMPS_SDA", /* Used by eMMC */ "SD_CLK_R", "SD_CMD_R", diff --git a/dts/src/arm/bcm2837-rpi-cm3.dtsi b/dts/src/arm/bcm2837-rpi-cm3.dtsi index 828a20561b..f57b4ca145 100644 --- a/dts/src/arm/bcm2837-rpi-cm3.dtsi +++ b/dts/src/arm/bcm2837-rpi-cm3.dtsi @@ -41,12 +41,12 @@ #gpio-cells = <2>; gpio-line-names = "HDMI_HPD_N", "EMMC_EN_N", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC"; + "", + "", + "", + "", + "", + ""; status = "okay"; }; }; diff --git a/dts/src/arm/bcm283x-rpi-smsc9512.dtsi b/dts/src/arm/bcm283x-rpi-smsc9512.dtsi index 967e081cb9..882b138070 100644 --- a/dts/src/arm/bcm283x-rpi-smsc9512.dtsi +++ b/dts/src/arm/bcm283x-rpi-smsc9512.dtsi @@ -12,7 +12,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/dts/src/arm/bcm283x-rpi-smsc9514.dtsi b/dts/src/arm/bcm283x-rpi-smsc9514.dtsi index dc7ae776db..4273b90b53 100644 --- a/dts/src/arm/bcm283x-rpi-smsc9514.dtsi +++ b/dts/src/arm/bcm283x-rpi-smsc9514.dtsi @@ -11,7 +11,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/dts/src/arm/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/dts/src/arm/bcm4708-buffalo-wzr-1166dhp-common.dtsi new file mode 100644 index 0000000000..d659e409a1 --- /dev/null +++ b/dts/src/arm/bcm4708-buffalo-wzr-1166dhp-common.dtsi @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2 + * + * Copyright (C) 2014 Rafał Miłecki + * Copyright (C) 2022 SHIMAMOTO Takayoshi + */ + + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include + +/ { + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + gpio-sck = <&chipcommon 7 0>; + gpio-mosi = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; + + hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; + + leds { + compatible = "gpio-leds"; + + usb { + /* label = "bcm53xx:blue:usb"; */ + function = LED_FUNCTION_USB; + color = ; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>, <&ohci_port2>, + <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + power0 { + /* label = "bcm53xx:red:power"; */ + function = LED_FUNCTION_FAULT; + color = ; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + }; + + power1 { + /* label = "bcm53xx:white:power"; */ + function = LED_FUNCTION_POWER; + color = ; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router0 { + /* label = "bcm53xx:blue:router"; */ + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router1 { + /* label = "bcm53xx:amber:router"; */ + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + }; + + wan { + /* label = "bcm53xx:blue:wan"; */ + function = LED_FUNCTION_WAN; + color = ; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + wireless0 { + /* label = "bcm53xx:blue:wireless"; */ + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + }; + + wireless1 { + /* label = "bcm53xx:amber:wireless"; */ + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + aoss { + label = "AOSS"; + linux,code = ; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + + /* Commit mode set by switch? */ + mode { + label = "Mode"; + linux,code = ; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + /* Switch: AP mode */ + sw_ap { + label = "AP"; + linux,code = ; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + + eject { + label = "USB eject"; + linux,code = ; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; +}; + +&spi_nor { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/dts/src/arm/bcm4708-buffalo-wzr-1166dhp.dts b/dts/src/arm/bcm4708-buffalo-wzr-1166dhp.dts new file mode 100644 index 0000000000..8e506269fa --- /dev/null +++ b/dts/src/arm/bcm4708-buffalo-wzr-1166dhp.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindigs for Buffalo WZR-1166DHP + * + * Copyright (C) 2022 SHIMAMOTO Takayoshi + */ + +/dts-v1/; + +#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi" + +/ { + compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708"; + model = "Buffalo WZR-1166DHP"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + +}; diff --git a/dts/src/arm/bcm4708-buffalo-wzr-1166dhp2.dts b/dts/src/arm/bcm4708-buffalo-wzr-1166dhp2.dts new file mode 100644 index 0000000000..5961290270 --- /dev/null +++ b/dts/src/arm/bcm4708-buffalo-wzr-1166dhp2.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindigs for Buffalo WZR-1166DHP2 + * + * Copyright (C) 2022 SHIMAMOTO Takayoshi + */ + +/dts-v1/; + +#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi" + +/ { + compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708"; + model = "Buffalo WZR-1166DHP2"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + +}; diff --git a/dts/src/arm/bcm47094-asus-rt-ac88u.dts b/dts/src/arm/bcm47094-asus-rt-ac88u.dts index 82f9629f0a..d850375834 100644 --- a/dts/src/arm/bcm47094-asus-rt-ac88u.dts +++ b/dts/src/arm/bcm47094-asus-rt-ac88u.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright (C) 2021 Arınç ÜNAL + * Copyright (C) 2021-2022 Arınç ÜNAL */ /dts-v1/; @@ -25,6 +25,9 @@ nvram@1c080000 { compatible = "brcm,nvram"; reg = <0x1c080000 0x00180000>; + + et1macaddr: et1macaddr { + }; }; leds { @@ -177,9 +180,6 @@ dsa,member = <0 0>; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; @@ -208,6 +208,7 @@ sw0_p5: port@5 { reg = <5>; label = "extsw"; + phy-mode = "rgmii"; fixed-link { speed = <1000>; @@ -231,7 +232,6 @@ reg = <8>; ethernet = <&gmac2>; label = "cpu"; - status = "disabled"; fixed-link { speed = <1000>; @@ -241,6 +241,15 @@ }; }; +&gmac0 { + status = "disabled"; +}; + +&gmac1 { + nvmem-cells = <&et1macaddr>; + nvmem-cell-names = "mac-address"; +}; + &usb2 { vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; diff --git a/dts/src/arm/bcm47622.dtsi b/dts/src/arm/bcm47622.dtsi new file mode 100644 index 0000000000..c016e12b73 --- /dev/null +++ b/dts/src/arm/bcm47622.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include +#include + +/ { + compatible = "brcm,bcm47622", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + CA7_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>, <&CA7_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + cpu_off = <1>; + cpu_on = <2>; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x818000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = ; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/bcm53016-meraki-mr32.dts b/dts/src/arm/bcm53016-meraki-mr32.dts index 66c64a6ec4..daca63f251 100644 --- a/dts/src/arm/bcm53016-meraki-mr32.dts +++ b/dts/src/arm/bcm53016-meraki-mr32.dts @@ -13,7 +13,7 @@ #include / { - compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708"; + compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708"; model = "Meraki MR32"; chosen { diff --git a/dts/src/arm/bcm5301x.dtsi b/dts/src/arm/bcm5301x.dtsi index 603c700c70..65f8a759f1 100644 --- a/dts/src/arm/bcm5301x.dtsi +++ b/dts/src/arm/bcm5301x.dtsi @@ -455,7 +455,7 @@ reg = <0x180 0x4>; }; - pinctrl: pin-controller@1c0 { + pinctrl: pinctrl@1c0 { compatible = "brcm,bcm4708-pinmux"; reg = <0x1c0 0x24>; reg-names = "cru_gpio_control"; diff --git a/dts/src/arm/bcm53340-ubnt-unifi-switch8.dts b/dts/src/arm/bcm53340-ubnt-unifi-switch8.dts index 2e7fda9b99..975f854f65 100644 --- a/dts/src/arm/bcm53340-ubnt-unifi-switch8.dts +++ b/dts/src/arm/bcm53340-ubnt-unifi-switch8.dts @@ -34,7 +34,7 @@ status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { compatible = "m25p80"; reg = <0>; #address-cells = <1>; diff --git a/dts/src/arm/bcm947622.dts b/dts/src/arm/bcm947622.dts new file mode 100644 index 0000000000..6f083724ab --- /dev/null +++ b/dts/src/arm/bcm947622.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm47622.dtsi" + +/ { + model = "Broadcom BCM947622 Reference Board"; + compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/bcm953012er.dts b/dts/src/arm/bcm953012er.dts index 52feca0fb9..dd63a148a1 100644 --- a/dts/src/arm/bcm953012er.dts +++ b/dts/src/arm/bcm953012er.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Enterprise Router (BCM953012ER)"; - compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; + compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708"; memory@0 { device_type = "memory"; diff --git a/dts/src/arm/bcm953012hr.dts b/dts/src/arm/bcm953012hr.dts index 9140be7ec0..b070b69466 100644 --- a/dts/src/arm/bcm953012hr.dts +++ b/dts/src/arm/bcm953012hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar HR (BCM953012HR)"; - compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708"; + compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708"; aliases { ethernet0 = &gmac0; diff --git a/dts/src/arm/bcm953012k.dts b/dts/src/arm/bcm953012k.dts index de40bd59a5..f1e6bcaa1e 100644 --- a/dts/src/arm/bcm953012k.dts +++ b/dts/src/arm/bcm953012k.dts @@ -36,7 +36,7 @@ / { model = "NorthStar SVK (BCM953012K)"; - compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708"; + compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708"; aliases { serial0 = &uart0; diff --git a/dts/src/arm/bcm958522er.dts b/dts/src/arm/bcm958522er.dts index 60376b62cd..15f023656d 100644 --- a/dts/src/arm/bcm958522er.dts +++ b/dts/src/arm/bcm958522er.dts @@ -136,7 +136,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/dts/src/arm/bcm958525er.dts b/dts/src/arm/bcm958525er.dts index 8eeb319f5b..9b9c225a1f 100644 --- a/dts/src/arm/bcm958525er.dts +++ b/dts/src/arm/bcm958525er.dts @@ -136,7 +136,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/dts/src/arm/bcm958525xmc.dts b/dts/src/arm/bcm958525xmc.dts index dc86d5a912..ca93114527 100644 --- a/dts/src/arm/bcm958525xmc.dts +++ b/dts/src/arm/bcm958525xmc.dts @@ -152,7 +152,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/dts/src/arm/bcm958622hr.dts b/dts/src/arm/bcm958622hr.dts index c457e53d88..9db3c85145 100644 --- a/dts/src/arm/bcm958622hr.dts +++ b/dts/src/arm/bcm958622hr.dts @@ -140,7 +140,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/dts/src/arm/bcm958623hr.dts b/dts/src/arm/bcm958623hr.dts index c06871915a..32786e7c4e 100644 --- a/dts/src/arm/bcm958623hr.dts +++ b/dts/src/arm/bcm958623hr.dts @@ -144,7 +144,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/dts/src/arm/bcm958625hr.dts b/dts/src/arm/bcm958625hr.dts index b22fc6624a..74263d98de 100644 --- a/dts/src/arm/bcm958625hr.dts +++ b/dts/src/arm/bcm958625hr.dts @@ -151,7 +151,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/dts/src/arm/bcm958625k.dts b/dts/src/arm/bcm958625k.dts index 0183f8965a..69ebc7a913 100644 --- a/dts/src/arm/bcm958625k.dts +++ b/dts/src/arm/bcm958625k.dts @@ -155,7 +155,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/dts/src/arm/bcm988312hr.dts b/dts/src/arm/bcm988312hr.dts index 007e347159..e96bc3f2d5 100644 --- a/dts/src/arm/bcm988312hr.dts +++ b/dts/src/arm/bcm988312hr.dts @@ -140,7 +140,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/dts/src/arm/da850.dtsi b/dts/src/arm/da850.dtsi index c3942b4e82..0386376fa4 100644 --- a/dts/src/arm/da850.dtsi +++ b/dts/src/arm/da850.dtsi @@ -679,7 +679,9 @@ "scheduler", "queuemgr"; interrupts = <58>; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <4>; + dma-channels = <4>; power-domains = <&psc1 1>; status = "okay"; }; diff --git a/dts/src/arm/dm814x.dtsi b/dts/src/arm/dm814x.dtsi index 7702e048e1..a92630113f 100644 --- a/dts/src/arm/dm814x.dtsi +++ b/dts/src/arm/dm814x.dtsi @@ -167,8 +167,11 @@ interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <30>; + dma-channels = <30>; #dma-requests = <256>; + dma-requests = <256>; }; }; diff --git a/dts/src/arm/dm816x.dtsi b/dts/src/arm/dm816x.dtsi index a9e7274806..eb0a95da94 100644 --- a/dts/src/arm/dm816x.dtsi +++ b/dts/src/arm/dm816x.dtsi @@ -655,8 +655,11 @@ interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <30>; + dma-channels = <30>; #dma-requests = <256>; + dma-requests = <256>; }; }; diff --git a/dts/src/arm/dove-cubox.dts b/dts/src/arm/dove-cubox.dts index 3e1584e787..2639b9fe0a 100644 --- a/dts/src/arm/dove-cubox.dts +++ b/dts/src/arm/dove-cubox.dts @@ -127,7 +127,7 @@ status = "okay"; /* spi0.0: 4M Flash Winbond W25Q32BV */ - spi-flash@0 { + flash@0 { compatible = "st,w25q32"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/dts/src/arm/dove-d2plug.dts b/dts/src/arm/dove-d2plug.dts index 273f12ca25..a0e8996c2f 100644 --- a/dts/src/arm/dove-d2plug.dts +++ b/dts/src/arm/dove-d2plug.dts @@ -62,7 +62,7 @@ status = "okay"; /* spi0.0: 4M Flash Macronix MX25L3205D */ - spi-flash@0 { + flash@0 { compatible = "st,m25l3205d"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/dts/src/arm/dove-d3plug.dts b/dts/src/arm/dove-d3plug.dts index 826026c28f..1e81d1b970 100644 --- a/dts/src/arm/dove-d3plug.dts +++ b/dts/src/arm/dove-d3plug.dts @@ -79,7 +79,7 @@ status = "okay"; /* spi0.0: 2M Flash Macronix MX25L1605D */ - spi-flash@0 { + flash@0 { compatible = "st,m25l1605d"; spi-max-frequency = <86000000>; reg = <0>; diff --git a/dts/src/arm/dove-dove-db.dts b/dts/src/arm/dove-dove-db.dts index 1754a62e01..c1912dc6bf 100644 --- a/dts/src/arm/dove-dove-db.dts +++ b/dts/src/arm/dove-dove-db.dts @@ -27,7 +27,7 @@ status = "okay"; /* spi0.0: 4M Flash ST-M25P32-VMF6P */ - spi-flash@0 { + flash@0 { compatible = "st,m25p32"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/dts/src/arm/dra7-evm-common.dtsi b/dts/src/arm/dra7-evm-common.dtsi index 0f71a9f37a..68c43eb12c 100644 --- a/dts/src/arm/dra7-evm-common.dtsi +++ b/dts/src/arm/dra7-evm-common.dtsi @@ -135,7 +135,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1"; spi-max-frequency = <76800000>; reg = <0>; diff --git a/dts/src/arm/dra72-evm-common.dtsi b/dts/src/arm/dra72-evm-common.dtsi index f128252681..8948e10dbe 100644 --- a/dts/src/arm/dra72-evm-common.dtsi +++ b/dts/src/arm/dra72-evm-common.dtsi @@ -474,7 +474,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1"; spi-max-frequency = <76800000>; reg = <0>; diff --git a/dts/src/arm/dra76-evm.dts b/dts/src/arm/dra76-evm.dts index e2b7fcb061..57868ac60d 100644 --- a/dts/src/arm/dra76-evm.dts +++ b/dts/src/arm/dra76-evm.dts @@ -511,7 +511,7 @@ &qspi { spi-max-frequency = <96000000>; - m25p80@0 { + flash@0 { spi-max-frequency = <96000000>; }; }; diff --git a/dts/src/arm/dra7xx-clocks.dtsi b/dts/src/arm/dra7xx-clocks.dtsi index 2365554eef..04a7a6d1d5 100644 --- a/dts/src/arm/dra7xx-clocks.dtsi +++ b/dts/src/arm/dra7xx-clocks.dtsi @@ -5,210 +5,244 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &cm_core_aon_clocks { - atl_clkin0_ck: atl_clkin0_ck { + atl_clkin0_ck: clock-atl-clkin0 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin0_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - atl_clkin1_ck: atl_clkin1_ck { + atl_clkin1_ck: clock-atl-clkin1 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin1_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - atl_clkin2_ck: atl_clkin2_ck { + atl_clkin2_ck: clock-atl-clkin2 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin2_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - atl_clkin3_ck: atl_clkin3_ck { + atl_clkin3_ck: clock-atl-clkin3 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin3_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - hdmi_clkin_ck: hdmi_clkin_ck { + hdmi_clkin_ck: clock-hdmi-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "hdmi_clkin_ck"; clock-frequency = <0>; }; - mlb_clkin_ck: mlb_clkin_ck { + mlb_clkin_ck: clock-mlb-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "mlb_clkin_ck"; clock-frequency = <0>; }; - mlbp_clkin_ck: mlbp_clkin_ck { + mlbp_clkin_ck: clock-mlbp-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "mlbp_clkin_ck"; clock-frequency = <0>; }; - pciesref_acs_clk_ck: pciesref_acs_clk_ck { + pciesref_acs_clk_ck: clock-pciesref-acs { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pciesref_acs_clk_ck"; clock-frequency = <100000000>; }; - ref_clkin0_ck: ref_clkin0_ck { + ref_clkin0_ck: clock-ref-clkin0 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin0_ck"; clock-frequency = <0>; }; - ref_clkin1_ck: ref_clkin1_ck { + ref_clkin1_ck: clock-ref-clkin1 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin1_ck"; clock-frequency = <0>; }; - ref_clkin2_ck: ref_clkin2_ck { + ref_clkin2_ck: clock-ref-clkin2 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin2_ck"; clock-frequency = <0>; }; - ref_clkin3_ck: ref_clkin3_ck { + ref_clkin3_ck: clock-ref-clkin3 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin3_ck"; clock-frequency = <0>; }; - rmii_clk_ck: rmii_clk_ck { + rmii_clk_ck: clock-rmii { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "rmii_clk_ck"; clock-frequency = <0>; }; - sdvenc_clkin_ck: sdvenc_clkin_ck { + sdvenc_clkin_ck: clock-sdvenc-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sdvenc_clkin_ck"; clock-frequency = <0>; }; - secure_32k_clk_src_ck: secure_32k_clk_src_ck { + secure_32k_clk_src_ck: clock-secure-32k-clk-src { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "secure_32k_clk_src_ck"; clock-frequency = <32768>; }; - sys_clk32_crystal_ck: sys_clk32_crystal_ck { + sys_clk32_crystal_ck: clock-sys-clk32-crystal { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_clk32_crystal_ck"; clock-frequency = <32768>; }; - sys_clk32_pseudo_ck: sys_clk32_pseudo_ck { + sys_clk32_pseudo_ck: clock-sys-clk32-pseudo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sys_clk32_pseudo_ck"; clocks = <&sys_clkin1>; clock-mult = <1>; clock-div = <610>; }; - virt_12000000_ck: virt_12000000_ck { + virt_12000000_ck: clock-virt-12000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_12000000_ck"; clock-frequency = <12000000>; }; - virt_13000000_ck: virt_13000000_ck { + virt_13000000_ck: clock-virt-13000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_13000000_ck"; clock-frequency = <13000000>; }; - virt_16800000_ck: virt_16800000_ck { + virt_16800000_ck: clock-virt-16800000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_16800000_ck"; clock-frequency = <16800000>; }; - virt_19200000_ck: virt_19200000_ck { + virt_19200000_ck: clock-virt-19200000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; - virt_20000000_ck: virt_20000000_ck { + virt_20000000_ck: clock-virt-20000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_20000000_ck"; clock-frequency = <20000000>; }; - virt_26000000_ck: virt_26000000_ck { + virt_26000000_ck: clock-virt-26000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; - virt_27000000_ck: virt_27000000_ck { + virt_27000000_ck: clock-virt-27000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_27000000_ck"; clock-frequency = <27000000>; }; - virt_38400000_ck: virt_38400000_ck { + virt_38400000_ck: clock-virt-38400000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_38400000_ck"; clock-frequency = <38400000>; }; - sys_clkin2: sys_clkin2 { + sys_clkin2: clock-sys-clkin2 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_clkin2"; clock-frequency = <22579200>; }; - usb_otg_clkin_ck: usb_otg_clkin_ck { + usb_otg_clkin_ck: clock-usb-otg-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "usb_otg_clkin_ck"; clock-frequency = <0>; }; - video1_clkin_ck: video1_clkin_ck { + video1_clkin_ck: clock-video1-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video1_clkin_ck"; clock-frequency = <0>; }; - video1_m2_clkin_ck: video1_m2_clkin_ck { + video1_m2_clkin_ck: clock-video1-m2-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video1_m2_clkin_ck"; clock-frequency = <0>; }; - video2_clkin_ck: video2_clkin_ck { + video2_clkin_ck: clock-video2-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video2_clkin_ck"; clock-frequency = <0>; }; - video2_m2_clkin_ck: video2_m2_clkin_ck { + video2_m2_clkin_ck: clock-video2-m2-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video2_m2_clkin_ck"; clock-frequency = <0>; }; - dpll_abe_ck: dpll_abe_ck@1e0 { + dpll_abe_ck: clock@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; + clock-output-names = "dpll_abe_ck"; clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; }; - dpll_abe_x2_ck: dpll_abe_x2_ck { + dpll_abe_x2_ck: clock-dpll-abe-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_abe_x2_ck"; clocks = <&dpll_abe_ck>; }; - dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { + dpll_abe_m2x2_ck: clock-dpll-abe-m2x2-8@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -217,18 +251,20 @@ ti,invert-autoidle-bit; }; - abe_clk: abe_clk@108 { + abe_clk: clock-abe@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_clk"; clocks = <&dpll_abe_m2x2_ck>; ti,max-div = <4>; reg = <0x0108>; ti,index-power-of-two; }; - dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 { + dpll_abe_m2_ck: clock-dpll-abe-m2-8@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2_ck"; clocks = <&dpll_abe_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -237,9 +273,10 @@ ti,invert-autoidle-bit; }; - dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { + dpll_abe_m3x2_ck: clock-dpll-abe-m3x2-8@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m3x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -248,30 +285,34 @@ ti,invert-autoidle-bit; }; - dpll_core_byp_mux: dpll_core_byp_mux@12c { + dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_core_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x012c>; }; - dpll_core_ck: dpll_core_ck@120 { + dpll_core_ck: clock@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin1>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; - dpll_core_x2_ck: dpll_core_x2_ck { + dpll_core_x2_ck: clock-dpll-core-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; - dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c { + dpll_core_h12x2_ck: clock-dpll-core-h12x2-8@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h12x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -280,24 +321,27 @@ ti,invert-autoidle-bit; }; - mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { + mpu_dpll_hs_clk_div: clock-mpu-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_mpu_ck: dpll_mpu_ck@160 { + dpll_mpu_ck: clock@160 { #clock-cells = <0>; compatible = "ti,omap5-mpu-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { + dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -306,42 +350,47 @@ ti,invert-autoidle-bit; }; - mpu_dclk_div: mpu_dclk_div { + mpu_dclk_div: clock-mpu-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_dclk_div"; clocks = <&dpll_mpu_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div { + dsp_dpll_hs_clk_div: clock-dsp-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dsp_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 { + dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_dsp_byp_mux"; clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x0240>; }; - dpll_dsp_ck: dpll_dsp_ck@234 { + dpll_dsp_ck: clock@234 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_dsp_ck"; clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; assigned-clocks = <&dpll_dsp_ck>; assigned-clock-rates = <600000000>; }; - dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 { + dpll_dsp_m2_ck: clock-dpll-dsp-m2-8@244 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_dsp_m2_ck"; clocks = <&dpll_dsp_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -352,34 +401,38 @@ assigned-clock-rates = <600000000>; }; - iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { + iva_dpll_hs_clk_div: clock-iva-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "iva_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_iva_byp_mux: dpll_iva_byp_mux@1ac { + dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_iva_byp_mux"; clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x01ac>; }; - dpll_iva_ck: dpll_iva_ck@1a0 { + dpll_iva_ck: clock@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_iva_ck"; clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; assigned-clocks = <&dpll_iva_ck>; assigned-clock-rates = <1165000000>; }; - dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 { + dpll_iva_m2_ck: clock-dpll-iva-m2-8@1b0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_m2_ck"; clocks = <&dpll_iva_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -390,34 +443,38 @@ assigned-clock-rates = <388333334>; }; - iva_dclk: iva_dclk { + iva_dclk: clock-iva-dclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "iva_dclk"; clocks = <&dpll_iva_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 { + dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_gpu_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x02e4>; }; - dpll_gpu_ck: dpll_gpu_ck@2d8 { + dpll_gpu_ck: clock@2d8 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_gpu_ck"; clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; assigned-clocks = <&dpll_gpu_ck>; assigned-clock-rates = <1277000000>; }; - dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 { + dpll_gpu_m2_ck: clock-dpll-gpu-m2-8@2e8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gpu_m2_ck"; clocks = <&dpll_gpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -428,9 +485,10 @@ assigned-clock-rates = <425666667>; }; - dpll_core_m2_ck: dpll_core_m2_ck@130 { + dpll_core_m2_ck: clock-dpll-core-m2-8@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m2_ck"; clocks = <&dpll_core_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -439,32 +497,36 @@ ti,invert-autoidle-bit; }; - core_dpll_out_dclk_div: core_dpll_out_dclk_div { + core_dpll_out_dclk_div: clock-core-dpll-out-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "core_dpll_out_dclk_div"; clocks = <&dpll_core_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c { + dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_ddr_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x021c>; }; - dpll_ddr_ck: dpll_ddr_ck@210 { + dpll_ddr_ck: clock@210 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_ddr_ck"; clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>; reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 { + dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@220 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m2_ck"; clocks = <&dpll_ddr_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -473,24 +535,27 @@ ti,invert-autoidle-bit; }; - dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 { + dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_gmac_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x02b4>; }; - dpll_gmac_ck: dpll_gmac_ck@2a8 { + dpll_gmac_ck: clock@2a8 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_gmac_ck"; clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>; reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>; }; - dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 { + dpll_gmac_m2_ck: clock-dpll-gmac-m2-8@2b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_m2_ck"; clocks = <&dpll_gmac_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -499,72 +564,81 @@ ti,invert-autoidle-bit; }; - video2_dclk_div: video2_dclk_div { + video2_dclk_div: clock-video2-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video2_dclk_div"; clocks = <&video2_m2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video1_dclk_div: video1_dclk_div { + video1_dclk_div: clock-video1-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video1_dclk_div"; clocks = <&video1_m2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - hdmi_dclk_div: hdmi_dclk_div { + hdmi_dclk_div: clock-hdmi-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "hdmi_dclk_div"; clocks = <&hdmi_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - per_dpll_hs_clk_div: per_dpll_hs_clk_div { + per_dpll_hs_clk_div: clock-per-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <2>; }; - usb_dpll_hs_clk_div: usb_dpll_hs_clk_div { + usb_dpll_hs_clk_div: clock-usb-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "usb_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <3>; }; - eve_dpll_hs_clk_div: eve_dpll_hs_clk_div { + eve_dpll_hs_clk_div: clock-eve-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "eve_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_eve_byp_mux: dpll_eve_byp_mux@290 { + dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_eve_byp_mux"; clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x0290>; }; - dpll_eve_ck: dpll_eve_ck@284 { + dpll_eve_ck: clock@284 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_eve_ck"; clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>; reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>; }; - dpll_eve_m2_ck: dpll_eve_m2_ck@294 { + dpll_eve_m2_ck: clock-dpll-eve-m2-8@294 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_eve_m2_ck"; clocks = <&dpll_eve_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -573,17 +647,19 @@ ti,invert-autoidle-bit; }; - eve_dclk_div: eve_dclk_div { + eve_dclk_div: clock-eve-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "eve_dclk_div"; clocks = <&dpll_eve_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 { + dpll_core_h13x2_ck: clock-dpll-core-h13x2-8@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h13x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -592,9 +668,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 { + dpll_core_h14x2_ck: clock-dpll-core-h14x2-8@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h14x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -603,9 +680,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 { + dpll_core_h22x2_ck: clock-dpll-core-h22x2-8@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h22x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -614,9 +692,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 { + dpll_core_h23x2_ck: clock-dpll-core-h23x2-8@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h23x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -625,9 +704,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c { + dpll_core_h24x2_ck: clock-dpll-core-h24x2-8@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h24x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -636,15 +716,17 @@ ti,invert-autoidle-bit; }; - dpll_ddr_x2_ck: dpll_ddr_x2_ck { + dpll_ddr_x2_ck: clock-dpll-ddr-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_ddr_x2_ck"; clocks = <&dpll_ddr_ck>; }; - dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 { + dpll_ddr_h11x2_ck: clock-dpll-ddr-h11x2-8@228 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_h11x2_ck"; clocks = <&dpll_ddr_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -653,15 +735,17 @@ ti,invert-autoidle-bit; }; - dpll_dsp_x2_ck: dpll_dsp_x2_ck { + dpll_dsp_x2_ck: clock-dpll-dsp-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_dsp_x2_ck"; clocks = <&dpll_dsp_ck>; }; - dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 { + dpll_dsp_m3x2_ck: clock-dpll-dsp-m3x2-8@248 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_dsp_m3x2_ck"; clocks = <&dpll_dsp_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -672,15 +756,17 @@ assigned-clock-rates = <400000000>; }; - dpll_gmac_x2_ck: dpll_gmac_x2_ck { + dpll_gmac_x2_ck: clock-dpll-gmac-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_gmac_x2_ck"; clocks = <&dpll_gmac_ck>; }; - dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 { + dpll_gmac_h11x2_ck: clock-dpll-gmac-h11x2-8@2c0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_h11x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -689,9 +775,10 @@ ti,invert-autoidle-bit; }; - dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 { + dpll_gmac_h12x2_ck: clock-dpll-gmac-h12x2-8@2c4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_h12x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -700,9 +787,10 @@ ti,invert-autoidle-bit; }; - dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 { + dpll_gmac_h13x2_ck: clock-dpll-gmac-h13x2-8@2c8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_h13x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -711,9 +799,10 @@ ti,invert-autoidle-bit; }; - dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc { + dpll_gmac_m3x2_ck: clock-dpll-gmac-m3x2-8@2bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_m3x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -722,33 +811,37 @@ ti,invert-autoidle-bit; }; - gmii_m_clk_div: gmii_m_clk_div { + gmii_m_clk_div: clock-gmii-m-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "gmii_m_clk_div"; clocks = <&dpll_gmac_h11x2_ck>; clock-mult = <1>; clock-div = <2>; }; - hdmi_clk2_div: hdmi_clk2_div { + hdmi_clk2_div: clock-hdmi-clk2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "hdmi_clk2_div"; clocks = <&hdmi_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - hdmi_div_clk: hdmi_div_clk { + hdmi_div_clk: clock-hdmi-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "hdmi_div_clk"; clocks = <&hdmi_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - l3_iclk_div: l3_iclk_div@100 { + l3_iclk_div: clock-l3-iclk-div-4@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3_iclk_div"; ti,max-div = <2>; ti,bit-shift = <4>; reg = <0x0100>; @@ -756,374 +849,420 @@ ti,index-power-of-two; }; - l4_root_clk_div: l4_root_clk_div { + l4_root_clk_div: clock-l4-root-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4_root_clk_div"; clocks = <&l3_iclk_div>; clock-mult = <1>; clock-div = <2>; }; - video1_clk2_div: video1_clk2_div { + video1_clk2_div: clock-video1-clk2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video1_clk2_div"; clocks = <&video1_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video1_div_clk: video1_div_clk { + video1_div_clk: clock-video1-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video1_div_clk"; clocks = <&video1_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video2_clk2_div: video2_clk2_div { + video2_clk2_div: clock-video2-clk2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video2_clk2_div"; clocks = <&video2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video2_div_clk: video2_div_clk { + video2_div_clk: clock-video2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video2_div_clk"; clocks = <&video2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dummy_ck: dummy_ck { + dummy_ck: clock-dummy { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "dummy_ck"; clock-frequency = <0>; }; }; &prm_clocks { - sys_clkin1: sys_clkin1@110 { + sys_clkin1: clock-sys-clkin1@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin1"; clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; reg = <0x0110>; ti,index-starts-at-one; }; - abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 { + abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_sys_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0118>; }; - abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 { + abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_bypass_clk_mux"; clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; reg = <0x0114>; }; - abe_dpll_clk_mux: abe_dpll_clk_mux@10c { + abe_dpll_clk_mux: clock-abe-dpll-clk-mux@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_clk_mux"; clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; reg = <0x010c>; }; - abe_24m_fclk: abe_24m_fclk@11c { + abe_24m_fclk: clock-abe-24m@11c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_24m_fclk"; clocks = <&dpll_abe_m2x2_ck>; reg = <0x011c>; ti,dividers = <8>, <16>; }; - aess_fclk: aess_fclk@178 { + aess_fclk: clock-aess@178 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "aess_fclk"; clocks = <&abe_clk>; reg = <0x0178>; ti,max-div = <2>; }; - abe_giclk_div: abe_giclk_div@174 { + abe_giclk_div: clock-abe-giclk-div@174 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_giclk_div"; clocks = <&aess_fclk>; reg = <0x0174>; ti,max-div = <2>; }; - abe_lp_clk_div: abe_lp_clk_div@1d8 { + abe_lp_clk_div: clock-abe-lp-clk-div@1d8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_lp_clk_div"; clocks = <&dpll_abe_m2x2_ck>; reg = <0x01d8>; ti,dividers = <16>, <32>; }; - abe_sys_clk_div: abe_sys_clk_div@120 { + abe_sys_clk_div: clock-abe-sys-clk-div@120 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_sys_clk_div"; clocks = <&sys_clkin1>; reg = <0x0120>; ti,max-div = <2>; }; - adc_gfclk_mux: adc_gfclk_mux@1dc { + adc_gfclk_mux: clock-adc-gfclk-mux@1dc { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "adc_gfclk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>; reg = <0x01dc>; }; - sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 { + sys_clk1_dclk_div: clock-sys-clk1-dclk-div@1c8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "sys_clk1_dclk_div"; clocks = <&sys_clkin1>; ti,max-div = <64>; reg = <0x01c8>; ti,index-power-of-two; }; - sys_clk2_dclk_div: sys_clk2_dclk_div@1cc { + sys_clk2_dclk_div: clock-sys-clk2-dclk-div@1cc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "sys_clk2_dclk_div"; clocks = <&sys_clkin2>; ti,max-div = <64>; reg = <0x01cc>; ti,index-power-of-two; }; - per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc { + per_abe_x1_dclk_div: clock-per-abe-x1-dclk-div@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "per_abe_x1_dclk_div"; clocks = <&dpll_abe_m2_ck>; ti,max-div = <64>; reg = <0x01bc>; ti,index-power-of-two; }; - dsp_gclk_div: dsp_gclk_div@18c { + dsp_gclk_div: clock-dsp-gclk-div@18c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dsp_gclk_div"; clocks = <&dpll_dsp_m2_ck>; ti,max-div = <64>; reg = <0x018c>; ti,index-power-of-two; }; - gpu_dclk: gpu_dclk@1a0 { + gpu_dclk: clock-gpu-dclk@1a0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "gpu_dclk"; clocks = <&dpll_gpu_m2_ck>; ti,max-div = <64>; reg = <0x01a0>; ti,index-power-of-two; }; - emif_phy_dclk_div: emif_phy_dclk_div@190 { + emif_phy_dclk_div: clock-emif-phy-dclk-div@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "emif_phy_dclk_div"; clocks = <&dpll_ddr_m2_ck>; ti,max-div = <64>; reg = <0x0190>; ti,index-power-of-two; }; - gmac_250m_dclk_div: gmac_250m_dclk_div@19c { + gmac_250m_dclk_div: clock-gmac-250m-dclk-div@19c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "gmac_250m_dclk_div"; clocks = <&dpll_gmac_m2_ck>; ti,max-div = <64>; reg = <0x019c>; ti,index-power-of-two; }; - gmac_main_clk: gmac_main_clk { + gmac_main_clk: clock-gmac-main { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "gmac_main_clk"; clocks = <&gmac_250m_dclk_div>; clock-mult = <1>; clock-div = <2>; }; - l3init_480m_dclk_div: l3init_480m_dclk_div@1ac { + l3init_480m_dclk_div: clock-l3init-480m-dclk-div@1ac { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3init_480m_dclk_div"; clocks = <&dpll_usb_m2_ck>; ti,max-div = <64>; reg = <0x01ac>; ti,index-power-of-two; }; - usb_otg_dclk_div: usb_otg_dclk_div@184 { + usb_otg_dclk_div: clock-usb-otg-dclk-div@184 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "usb_otg_dclk_div"; clocks = <&usb_otg_clkin_ck>; ti,max-div = <64>; reg = <0x0184>; ti,index-power-of-two; }; - sata_dclk_div: sata_dclk_div@1c0 { + sata_dclk_div: clock-sata-dclk-div@1c0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "sata_dclk_div"; clocks = <&sys_clkin1>; ti,max-div = <64>; reg = <0x01c0>; ti,index-power-of-two; }; - pcie2_dclk_div: pcie2_dclk_div@1b8 { + pcie2_dclk_div: clock-pcie2-dclk-div@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "pcie2_dclk_div"; clocks = <&dpll_pcie_ref_m2_ck>; ti,max-div = <64>; reg = <0x01b8>; ti,index-power-of-two; }; - pcie_dclk_div: pcie_dclk_div@1b4 { + pcie_dclk_div: clock-pcie-dclk-div@1b4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "pcie_dclk_div"; clocks = <&apll_pcie_m2_ck>; ti,max-div = <64>; reg = <0x01b4>; ti,index-power-of-two; }; - emu_dclk_div: emu_dclk_div@194 { + emu_dclk_div: clock-emu-dclk-div@194 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "emu_dclk_div"; clocks = <&sys_clkin1>; ti,max-div = <64>; reg = <0x0194>; ti,index-power-of-two; }; - secure_32k_dclk_div: secure_32k_dclk_div@1c4 { + secure_32k_dclk_div: clock-secure-32k-dclk-div@1c4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "secure_32k_dclk_div"; clocks = <&secure_32k_clk_src_ck>; ti,max-div = <64>; reg = <0x01c4>; ti,index-power-of-two; }; - clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 { + clkoutmux0_clk_mux: clock-clkoutmux0-clk-mux@158 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkoutmux0_clk_mux"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x0158>; }; - clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c { + clkoutmux1_clk_mux: clock-clkoutmux1-clk-mux@15c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkoutmux1_clk_mux"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x015c>; }; - clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 { + clkoutmux2_clk_mux: clock-clkoutmux2-clk-mux@160 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkoutmux2_clk_mux"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x0160>; }; - custefuse_sys_gfclk_div: custefuse_sys_gfclk_div { + custefuse_sys_gfclk_div: clock-custefuse-sys-gfclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "custefuse_sys_gfclk_div"; clocks = <&sys_clkin1>; clock-mult = <1>; clock-div = <2>; }; - eve_clk: eve_clk@180 { + eve_clk: clock-eve@180 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "eve_clk"; clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>; reg = <0x0180>; }; - hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 { + hdmi_dpll_clk_mux: clock-hdmi-dpll-clk-mux@164 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "hdmi_dpll_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0164>; }; - mlb_clk: mlb_clk@134 { + mlb_clk: clock-mlb@134 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "mlb_clk"; clocks = <&mlb_clkin_ck>; ti,max-div = <64>; reg = <0x0134>; ti,index-power-of-two; }; - mlbp_clk: mlbp_clk@130 { + mlbp_clk: clock-mlbp@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "mlbp_clk"; clocks = <&mlbp_clkin_ck>; ti,max-div = <64>; reg = <0x0130>; ti,index-power-of-two; }; - per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 { + per_abe_x1_gfclk2_div: clock-per-abe-x1-gfclk2-div@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "per_abe_x1_gfclk2_div"; clocks = <&dpll_abe_m2_ck>; ti,max-div = <64>; reg = <0x0138>; ti,index-power-of-two; }; - timer_sys_clk_div: timer_sys_clk_div@144 { + timer_sys_clk_div: clock-timer-sys-clk-div@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "timer_sys_clk_div"; clocks = <&sys_clkin1>; reg = <0x0144>; ti,max-div = <2>; }; - video1_dpll_clk_mux: video1_dpll_clk_mux@168 { + video1_dpll_clk_mux: clock-video1-dpll-clk-mux@168 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "video1_dpll_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0168>; }; - video2_dpll_clk_mux: video2_dpll_clk_mux@16c { + video2_dpll_clk_mux: clock-video2-dpll-clk-mux@16c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "video2_dpll_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x016c>; }; - wkupaon_iclk_mux: wkupaon_iclk_mux@108 { + wkupaon_iclk_mux: clock-wkupaon-iclk-mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wkupaon_iclk_mux"; clocks = <&sys_clkin1>, <&abe_lp_clk_div>; reg = <0x0108>; }; }; &cm_core_clocks { - dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 { + dpll_pcie_ref_ck: clock@200 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_pcie_ref_ck"; clocks = <&sys_clkin1>, <&sys_clkin1>; reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>; }; - dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 { + dpll_pcie_ref_m2ldo_ck: clock-dpll-pcie-ref-m2ldo-8@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_pcie_ref_m2ldo_ck"; clocks = <&dpll_pcie_ref_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -1132,23 +1271,26 @@ ti,invert-autoidle-bit; }; - apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 { + apll_pcie_in_clk_mux: clock-apll-pcie-in-clk-mux-7@4ae06118 { compatible = "ti,mux-clock"; + clock-output-names = "apll_pcie_in_clk_mux"; clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>; #clock-cells = <0>; reg = <0x021c 0x4>; ti,bit-shift = <7>; }; - apll_pcie_ck: apll_pcie_ck@21c { + apll_pcie_ck: clock@21c { #clock-cells = <0>; compatible = "ti,dra7-apll-clock"; + clock-output-names = "apll_pcie_ck"; clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; reg = <0x021c>, <0x0220>; }; - optfclk_pciephy_div: optfclk_pciephy_div@4a00821c { + optfclk_pciephy_div: clock-optfclk-pciephy-div-8@4a00821c { compatible = "ti,divider-clock"; + clock-output-names = "optfclk_pciephy_div"; clocks = <&apll_pcie_ck>; #clock-cells = <0>; reg = <0x021c>; @@ -1157,48 +1299,54 @@ ti,max-div = <2>; }; - apll_pcie_clkvcoldo: apll_pcie_clkvcoldo { + apll_pcie_clkvcoldo: clock-apll-pcie-clkvcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "apll_pcie_clkvcoldo"; clocks = <&apll_pcie_ck>; clock-mult = <1>; clock-div = <1>; }; - apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div { + apll_pcie_clkvcoldo_div: clock-apll-pcie-clkvcoldo-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "apll_pcie_clkvcoldo_div"; clocks = <&apll_pcie_ck>; clock-mult = <1>; clock-div = <1>; }; - apll_pcie_m2_ck: apll_pcie_m2_ck { + apll_pcie_m2_ck: clock-apll-pcie-m2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "apll_pcie_m2_ck"; clocks = <&apll_pcie_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_per_byp_mux: dpll_per_byp_mux@14c { + dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_per_byp_mux"; clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x014c>; }; - dpll_per_ck: dpll_per_ck@140 { + dpll_per_ck: clock@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin1>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; - dpll_per_m2_ck: dpll_per_m2_ck@150 { + dpll_per_m2_ck: clock-dpll-per-m2-8@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -1207,32 +1355,36 @@ ti,invert-autoidle-bit; }; - func_96m_aon_dclk_div: func_96m_aon_dclk_div { + func_96m_aon_dclk_div: clock-func-96m-aon-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_96m_aon_dclk_div"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_usb_byp_mux: dpll_usb_byp_mux@18c { + dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_usb_byp_mux"; clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x018c>; }; - dpll_usb_ck: dpll_usb_ck@180 { + dpll_usb_ck: clock@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; + clock-output-names = "dpll_usb_ck"; clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; - dpll_usb_m2_ck: dpll_usb_m2_ck@190 { + dpll_usb_m2_ck: clock-dpll-usb-m2-8@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_usb_m2_ck"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -1241,9 +1393,10 @@ ti,invert-autoidle-bit; }; - dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 { + dpll_pcie_ref_m2_ck: clock-dpll-pcie-ref-m2-8@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_pcie_ref_m2_ck"; clocks = <&dpll_pcie_ref_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -1252,15 +1405,17 @@ ti,invert-autoidle-bit; }; - dpll_per_x2_ck: dpll_per_x2_ck { + dpll_per_x2_ck: clock-dpll-per-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_per_x2_ck"; clocks = <&dpll_per_ck>; }; - dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 { + dpll_per_h11x2_ck: clock-dpll-per-h11x2-8@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h11x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1269,9 +1424,10 @@ ti,invert-autoidle-bit; }; - dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c { + dpll_per_h12x2_ck: clock-dpll-per-h12x2-8@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h12x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1280,9 +1436,10 @@ ti,invert-autoidle-bit; }; - dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 { + dpll_per_h13x2_ck: clock-dpll-per-h13x2-8@160 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h13x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1291,9 +1448,10 @@ ti,invert-autoidle-bit; }; - dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 { + dpll_per_h14x2_ck: clock-dpll-per-h14x2-8@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h14x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1302,9 +1460,10 @@ ti,invert-autoidle-bit; }; - dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { + dpll_per_m2x2_ck: clock-dpll-per-m2x2-8@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -1313,105 +1472,118 @@ ti,invert-autoidle-bit; }; - dpll_usb_clkdcoldo: dpll_usb_clkdcoldo { + dpll_usb_clkdcoldo: clock-dpll-usb-clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_usb_clkdcoldo"; clocks = <&dpll_usb_ck>; clock-mult = <1>; clock-div = <1>; }; - func_128m_clk: func_128m_clk { + func_128m_clk: clock-func-128m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_128m_clk"; clocks = <&dpll_per_h11x2_ck>; clock-mult = <1>; clock-div = <2>; }; - func_12m_fclk: func_12m_fclk { + func_12m_fclk: clock-func-12m-fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <16>; }; - func_24m_clk: func_24m_clk { + func_24m_clk: clock-func-24m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - func_48m_fclk: func_48m_fclk { + func_48m_fclk: clock-func-48m-fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_48m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <4>; }; - func_96m_fclk: func_96m_fclk { + func_96m_fclk: clock-func-96m-fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_96m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <2>; }; - l3init_60m_fclk: l3init_60m_fclk@104 { + l3init_60m_fclk: clock-l3init-60m@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3init_60m_fclk"; clocks = <&dpll_usb_m2_ck>; reg = <0x0104>; ti,dividers = <1>, <8>; }; - clkout2_clk: clkout2_clk@6b0 { + clkout2_clk: clock-clkout2-8@6b0 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "clkout2_clk"; clocks = <&clkoutmux2_clk_mux>; ti,bit-shift = <8>; reg = <0x06b0>; }; - l3init_960m_gfclk: l3init_960m_gfclk@6c0 { + l3init_960m_gfclk: clock-l3init-960m-gfclk-8@6c0 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "l3init_960m_gfclk"; clocks = <&dpll_usb_clkdcoldo>; ti,bit-shift = <8>; reg = <0x06c0>; }; - usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 { + usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy1_always_on_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0640>; }; - usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 { + usb_phy2_always_on_clk32k: clock-usb-phy2-always-on-clk32k-8@688 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy2_always_on_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0688>; }; - usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 { + usb_phy3_always_on_clk32k: clock-usb-phy3-always-on-clk32k-8@698 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy3_always_on_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0698>; }; - gpu_core_gclk_mux: gpu_core_gclk_mux@1220 { + gpu_core_gclk_mux: clock-gpu-core-gclk-mux-24@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_core_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <24>; reg = <0x1220>; @@ -1419,9 +1591,10 @@ assigned-clock-parents = <&dpll_gpu_m2_ck>; }; - gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 { + gpu_hyd_gclk_mux: clock-gpu-hyd-gclk-mux-26@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_hyd_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <26>; reg = <0x1220>; @@ -1429,34 +1602,38 @@ assigned-clock-parents = <&dpll_gpu_m2_ck>; }; - l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 { + l3instr_ts_gclk_div: clock-l3instr-ts-gclk-div-24@e50 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3instr_ts_gclk_div"; clocks = <&wkupaon_iclk_mux>; ti,bit-shift = <24>; reg = <0x0e50>; ti,dividers = <8>, <16>, <32>; }; - vip1_gclk_mux: vip1_gclk_mux@1020 { + vip1_gclk_mux: clock-vip1-gclk-mux-24@1020 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "vip1_gclk_mux"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ti,bit-shift = <24>; reg = <0x1020>; }; - vip2_gclk_mux: vip2_gclk_mux@1028 { + vip2_gclk_mux: clock-vip2-gclk-mux-24@1028 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "vip2_gclk_mux"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ti,bit-shift = <24>; reg = <0x1028>; }; - vip3_gclk_mux: vip3_gclk_mux@1030 { + vip3_gclk_mux: clock-vip3-gclk-mux-24@1030 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "vip3_gclk_mux"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ti,bit-shift = <24>; reg = <0x1030>; @@ -1464,48 +1641,54 @@ }; &cm_core_clockdomains { - coreaon_clkdm: coreaon_clkdm { + coreaon_clkdm: clock-coreaon-clkdm { compatible = "ti,clockdomain"; + clock-output-names = "coreaon_clkdm"; clocks = <&dpll_usb_ck>; }; }; &scm_conf_clocks { - dss_deshdcp_clk: dss_deshdcp_clk@558 { + dss_deshdcp_clk: clock-dss-deshdcp-0@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "dss_deshdcp_clk"; clocks = <&l3_iclk_div>; ti,bit-shift = <0>; reg = <0x558>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk@558 { + ehrpwm0_tbclk: clock-ehrpwm0-tbclk-20@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm0_tbclk"; clocks = <&l4_root_clk_div>; ti,bit-shift = <20>; reg = <0x0558>; }; - ehrpwm1_tbclk: ehrpwm1_tbclk@558 { + ehrpwm1_tbclk: clock-ehrpwm1-tbclk-21@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm1_tbclk"; clocks = <&l4_root_clk_div>; ti,bit-shift = <21>; reg = <0x0558>; }; - ehrpwm2_tbclk: ehrpwm2_tbclk@558 { + ehrpwm2_tbclk: clock-ehrpwm2-tbclk-22@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm2_tbclk"; clocks = <&l4_root_clk_div>; ti,bit-shift = <22>; reg = <0x0558>; }; - sys_32k_ck: sys_32k_ck { + sys_32k_ck: clock-sys-32k { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_32k_ck"; clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>; ti,bit-shift = <8>; reg = <0x6c4>; @@ -1513,97 +1696,110 @@ }; &cm_core_aon { - mpu_cm: mpu-cm@300 { + mpu_cm: clock@300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x300 0x100>; - mpu_clkctrl: mpu-clkctrl@20 { + mpu_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - dsp1_cm: dsp1-cm@400 { + dsp1_cm: clock@400 { compatible = "ti,omap4-cm"; + clock-output-names = "dsp1_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x400 0x100>; - dsp1_clkctrl: dsp1-clkctrl@20 { + dsp1_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dsp1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - ipu_cm: ipu-cm@500 { + ipu_cm: clock@500 { compatible = "ti,omap4-cm"; + clock-output-names = "ipu_cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x500 0x100>; - ipu1_clkctrl: ipu1-clkctrl@20 { + ipu1_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "ipu1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>; assigned-clock-parents = <&dpll_core_h22x2_ck>; }; - ipu_clkctrl: ipu-clkctrl@50 { + ipu_clkctrl: clock@50 { compatible = "ti,clkctrl"; + clock-output-names = "ipu_clkctrl"; reg = <0x50 0x34>; #clock-cells = <2>; }; }; - dsp2_cm: dsp2-cm@600 { + dsp2_cm: clock@600 { compatible = "ti,omap4-cm"; + clock-output-names = "dsp2_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - dsp2_clkctrl: dsp2-clkctrl@20 { + dsp2_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dsp2_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - rtc_cm: rtc-cm@700 { + rtc_cm: clock@700 { compatible = "ti,omap4-cm"; + clock-output-names = "rtc_cm"; reg = <0x700 0x60>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x700 0x60>; - rtc_clkctrl: rtc-clkctrl@20 { + rtc_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "rtc_clkctrl"; reg = <0x20 0x28>; #clock-cells = <2>; }; }; - vpe_cm: vpe-cm@760 { + vpe_cm: clock@760 { compatible = "ti,omap4-cm"; + clock-output-names = "vpe_cm"; reg = <0x760 0xc>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x760 0xc>; - vpe_clkctrl: vpe-clkctrl@0 { + vpe_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "vpe_clkctrl"; reg = <0x0 0xc>; #clock-cells = <2>; }; @@ -1612,212 +1808,242 @@ }; &cm_core { - coreaon_cm: coreaon-cm@600 { + coreaon_cm: clock@600 { compatible = "ti,omap4-cm"; + clock-output-names = "coreaon_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - coreaon_clkctrl: coreaon-clkctrl@20 { + coreaon_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "coreaon_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; }; - l3main1_cm: l3main1-cm@700 { + l3main1_cm: clock@700 { compatible = "ti,omap4-cm"; + clock-output-names = "l3main1_cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x700 0x100>; - l3main1_clkctrl: l3main1-clkctrl@20 { + l3main1_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3main1_clkctrl"; reg = <0x20 0x74>; #clock-cells = <2>; }; }; - ipu2_cm: ipu2-cm@900 { + ipu2_cm: clock@900 { compatible = "ti,omap4-cm"; + clock-output-names = "ipu2_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x900 0x100>; - ipu2_clkctrl: ipu2-clkctrl@20 { + ipu2_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "ipu2_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - dma_cm: dma-cm@a00 { + dma_cm: clock@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "dma_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xa00 0x100>; - dma_clkctrl: dma-clkctrl@20 { + dma_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dma_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - emif_cm: emif-cm@b00 { + emif_cm: clock@b00 { compatible = "ti,omap4-cm"; + clock-output-names = "emif_cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xb00 0x100>; - emif_clkctrl: emif-clkctrl@20 { + emif_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "emif_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - atl_cm: atl-cm@c00 { + atl_cm: clock@c00 { compatible = "ti,omap4-cm"; + clock-output-names = "atl_cm"; reg = <0xc00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xc00 0x100>; - atl_clkctrl: atl-clkctrl@0 { + atl_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "atl_clkctrl"; reg = <0x0 0x4>; #clock-cells = <2>; }; }; - l4cfg_cm: l4cfg-cm@d00 { + l4cfg_cm: clock@d00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4cfg_cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xd00 0x100>; - l4cfg_clkctrl: l4cfg-clkctrl@20 { + l4cfg_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4cfg_clkctrl"; reg = <0x20 0x84>; #clock-cells = <2>; }; }; - l3instr_cm: l3instr-cm@e00 { + l3instr_cm: clock@e00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3instr_cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xe00 0x100>; - l3instr_clkctrl: l3instr-clkctrl@20 { + l3instr_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3instr_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - iva_cm: iva-cm@f00 { + iva_cm: clock@f00 { compatible = "ti,omap4-cm"; + clock-output-names = "iva_cm"; reg = <0xf00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xf00 0x100>; - iva_clkctrl: iva-clkctrl@20 { + iva_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "iva_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - cam_cm: cam-cm@1000 { + cam_cm: clock@1000 { compatible = "ti,omap4-cm"; + clock-output-names = "cam_cm"; reg = <0x1000 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1000 0x100>; - cam_clkctrl: cam-clkctrl@20 { + cam_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "cam_clkctrl"; reg = <0x20 0x2c>; #clock-cells = <2>; }; }; - dss_cm: dss-cm@1100 { + dss_cm: clock@1100 { compatible = "ti,omap4-cm"; + clock-output-names = "dss_cm"; reg = <0x1100 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1100 0x100>; - dss_clkctrl: dss-clkctrl@20 { + dss_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dss_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; }; - gpu_cm: gpu-cm@1200 { + gpu_cm: clock@1200 { compatible = "ti,omap4-cm"; + clock-output-names = "gpu_cm"; reg = <0x1200 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1200 0x100>; - gpu_clkctrl: gpu-clkctrl@20 { + gpu_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "gpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - l3init_cm: l3init-cm@1300 { + l3init_cm: clock@1300 { compatible = "ti,omap4-cm"; + clock-output-names = "l3init_cm"; reg = <0x1300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1300 0x100>; - l3init_clkctrl: l3init-clkctrl@20 { + l3init_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3init_clkctrl"; reg = <0x20 0x6c>, <0xe0 0x14>; #clock-cells = <2>; }; - pcie_clkctrl: pcie-clkctrl@b0 { + pcie_clkctrl: clock@b0 { compatible = "ti,clkctrl"; + clock-output-names = "pcie_clkctrl"; reg = <0xb0 0xc>; #clock-cells = <2>; }; - gmac_clkctrl: gmac-clkctrl@d0 { + gmac_clkctrl: clock@d0 { compatible = "ti,clkctrl"; + clock-output-names = "gmac_clkctrl"; reg = <0xd0 0x4>; #clock-cells = <2>; }; }; - l4per_cm: l4per-cm@1700 { + l4per_cm: clock@1700 { compatible = "ti,omap4-cm"; + clock-output-names = "l4per_cm"; reg = <0x1700 0x300>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1700 0x300>; - l4per_clkctrl: l4per-clkctrl@28 { + l4per_clkctrl: clock@28 { compatible = "ti,clkctrl"; + clock-output-names = "l4per_clkctrl"; reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>; #clock-cells = <2>; @@ -1825,20 +2051,23 @@ assigned-clock-parents = <&abe_24m_fclk>; }; - l4sec_clkctrl: l4sec-clkctrl@1a0 { + l4sec_clkctrl: clock@1a0 { compatible = "ti,clkctrl"; + clock-output-names = "l4sec_clkctrl"; reg = <0x1a0 0x2c>; #clock-cells = <2>; }; - l4per2_clkctrl: l4per2-clkctrl@c { + l4per2_clkctrl: clock@c { compatible = "ti,clkctrl"; + clock-output-names = "l4per2_clkctrl"; reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>; #clock-cells = <2>; }; - l4per3_clkctrl: l4per3-clkctrl@14 { + l4per3_clkctrl: clock@14 { compatible = "ti,clkctrl"; + clock-output-names = "l4per3_clkctrl"; reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>; #clock-cells = <2>; }; @@ -1847,15 +2076,17 @@ }; &prm { - wkupaon_cm: wkupaon-cm@1800 { + wkupaon_cm: clock@1800 { compatible = "ti,omap4-cm"; + clock-output-names = "wkupaon_cm"; reg = <0x1800 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1800 0x100>; - wkupaon_clkctrl: wkupaon-clkctrl@20 { + wkupaon_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "wkupaon_clkctrl"; reg = <0x20 0x6c>; #clock-cells = <2>; }; diff --git a/dts/src/arm/exynos3250.dtsi b/dts/src/arm/exynos3250.dtsi index ae64431585..78dad233ff 100644 --- a/dts/src/arm/exynos3250.dtsi +++ b/dts/src/arm/exynos3250.dtsi @@ -269,7 +269,8 @@ }; timer@10050000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos3250-mct", + "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; interrupts = , , @@ -428,8 +429,6 @@ clocks = <&cmu CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@12690000 { @@ -439,8 +438,6 @@ clocks = <&cmu CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; adc: adc@126c0000 { diff --git a/dts/src/arm/exynos4.dtsi b/dts/src/arm/exynos4.dtsi index e81b3ee4e0..6f0ca3354e 100644 --- a/dts/src/arm/exynos4.dtsi +++ b/dts/src/arm/exynos4.dtsi @@ -373,7 +373,7 @@ status = "disabled"; }; - ehci: ehci@12580000 { + ehci: usb@12580000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12580000 0x100>; interrupts = ; @@ -384,7 +384,7 @@ phy-names = "host", "hsic0", "hsic1"; }; - ohci: ohci@12590000 { + ohci: usb@12590000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12590000 0x100>; interrupts = ; @@ -676,8 +676,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@12690000 { @@ -687,8 +685,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; mdma1: dma-controller@12850000 { @@ -698,8 +694,6 @@ clocks = <&clock CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; fimd: fimd@11c00000 { diff --git a/dts/src/arm/exynos4210-universal_c210.dts b/dts/src/arm/exynos4210-universal_c210.dts index 138d606d58..62bf335d5b 100644 --- a/dts/src/arm/exynos4210-universal_c210.dts +++ b/dts/src/arm/exynos4210-universal_c210.dts @@ -666,8 +666,6 @@ clocks = <&clock CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; power-domains = <&pd_lcd0>; }; }; diff --git a/dts/src/arm/exynos4412-odroidu3.dts b/dts/src/arm/exynos4412-odroidu3.dts index efaf7533e8..36c369c42b 100644 --- a/dts/src/arm/exynos4412-odroidu3.dts +++ b/dts/src/arm/exynos4412-odroidu3.dts @@ -119,8 +119,8 @@ phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>; phy-names = "hsic0", "hsic1"; - ethernet: usbether@2 { - compatible = "usb0424,9730"; + ethernet: ethernet@2 { + compatible = "usb424,9730"; reg = <2>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/dts/src/arm/exynos4412-odroidx.dts b/dts/src/arm/exynos4412-odroidx.dts index a9fada51eb..1f17cc30ed 100644 --- a/dts/src/arm/exynos4412-odroidx.dts +++ b/dts/src/arm/exynos4412-odroidx.dts @@ -70,19 +70,19 @@ phy-names = "hsic0"; hub@2 { - compatible = "usb0424,3503"; + compatible = "usb424,3503"; reg = <2>; #address-cells = <1>; #size-cells = <0>; hub@1 { - compatible = "usb0424,9514"; + compatible = "usb424,9514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { - compatible = "usb0424,ec00"; + ethernet: ethernet@1 { + compatible = "usb424,ec00"; reg = <1>; /* Filled in by a bootloader */ local-mac-address = [00 00 00 00 00 00]; diff --git a/dts/src/arm/exynos5250-smdk5250.dts b/dts/src/arm/exynos5250-smdk5250.dts index 21fbbf3d86..71293749ac 100644 --- a/dts/src/arm/exynos5250-smdk5250.dts +++ b/dts/src/arm/exynos5250-smdk5250.dts @@ -129,7 +129,7 @@ samsung,i2c-max-bus-freq = <20000>; eeprom@50 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x50>; }; @@ -289,7 +289,7 @@ samsung,i2c-max-bus-freq = <20000>; eeprom@51 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x51>; }; diff --git a/dts/src/arm/exynos5250.dtsi b/dts/src/arm/exynos5250.dtsi index 5baaa7eb71..4708dcd575 100644 --- a/dts/src/arm/exynos5250.dtsi +++ b/dts/src/arm/exynos5250.dtsi @@ -245,7 +245,8 @@ }; timer@101c0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5250-mct", + "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; @@ -699,8 +700,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@121b0000 { @@ -710,8 +709,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; mdma0: dma-controller@10800000 { @@ -721,8 +718,6 @@ clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; mdma1: dma-controller@11c10000 { @@ -732,8 +727,6 @@ clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; gsc_0: gsc@13e00000 { @@ -817,15 +810,14 @@ status = "disabled"; }; - dp_phy: video-phy { + dp_phy: video-phy-0 { compatible = "samsung,exynos5250-dp-video-phy"; samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; }; - mipi_phy: video-phy@10040710 { + mipi_phy: video-phy-1 { compatible = "samsung,s5pv210-mipi-video-phy"; - reg = <0x10040710 0x100>; #phy-cells = <1>; syscon = <&pmu_system_controller>; }; diff --git a/dts/src/arm/exynos5260.dtsi b/dts/src/arm/exynos5260.dtsi index 56271e7c45..ff1ee409ef 100644 --- a/dts/src/arm/exynos5260.dtsi +++ b/dts/src/arm/exynos5260.dtsi @@ -333,7 +333,8 @@ }; mct: timer@100b0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5260-mct", + "samsung,exynos4210-mct"; reg = <0x100B0000 0x1000>; clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; clock-names = "fin_pll", "mct"; diff --git a/dts/src/arm/exynos5410-odroidxu.dts b/dts/src/arm/exynos5410-odroidxu.dts index e54a339185..d1cbc6b8a5 100644 --- a/dts/src/arm/exynos5410-odroidxu.dts +++ b/dts/src/arm/exynos5410-odroidxu.dts @@ -655,8 +655,8 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@2 { - compatible = "usb0424,9730"; + ethernet: ethernet@2 { + compatible = "usb424,9730"; reg = <2>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/dts/src/arm/exynos5410.dtsi b/dts/src/arm/exynos5410.dtsi index 4d797a9abb..8a6b890fb8 100644 --- a/dts/src/arm/exynos5410.dtsi +++ b/dts/src/arm/exynos5410.dtsi @@ -196,8 +196,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@121b0000 { @@ -207,8 +205,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; audi2s0: i2s@3830000 { diff --git a/dts/src/arm/exynos5420.dtsi b/dts/src/arm/exynos5420.dtsi index 21b6087050..9f2523a873 100644 --- a/dts/src/arm/exynos5420.dtsi +++ b/dts/src/arm/exynos5420.dtsi @@ -437,8 +437,6 @@ clocks = <&clock_audss EXYNOS_ADMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <6>; - #dma-requests = <16>; power-domains = <&mau_pd>; }; @@ -449,8 +447,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@121b0000 { @@ -460,8 +456,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; mdma0: dma-controller@10800000 { @@ -471,8 +465,6 @@ clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; mdma1: dma-controller@11c10000 { @@ -482,8 +474,6 @@ clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; /* * MDMA1 can support both secure and non-secure * AXI transactions. When this is enabled in diff --git a/dts/src/arm/exynos5422-odroid-core.dtsi b/dts/src/arm/exynos5422-odroid-core.dtsi index 2f65dcf6ba..35818c4cd8 100644 --- a/dts/src/arm/exynos5422-odroid-core.dtsi +++ b/dts/src/arm/exynos5422-odroid-core.dtsi @@ -333,8 +333,6 @@ compatible = "samsung,K3QF2F20DB", "jedec,lpddr3"; density = <16384>; io-width = <32>; - #address-cells = <1>; - #size-cells = <0>; tRFC-min-tck = <17>; tRRD-min-tck = <2>; @@ -358,10 +356,9 @@ tCKESR-min-tck = <2>; tMRD-min-tck = <5>; - timings_samsung_K3QF2F20DB_800mhz: timings@800000000 { + timings_samsung_K3QF2F20DB_800mhz: timings { compatible = "jedec,lpddr3-timings"; - /* workaround: 'reg' shows max-freq */ - reg = <800000000>; + max-freq = <800000000>; min-freq = <100000000>; tRFC = <65000>; tRRD = <6000>; diff --git a/dts/src/arm/exynos5422-odroidxu3-lite.dts b/dts/src/arm/exynos5422-odroidxu3-lite.dts index 62c5928aa9..e3154a1cae 100644 --- a/dts/src/arm/exynos5422-odroidxu3-lite.dts +++ b/dts/src/arm/exynos5422-odroidxu3-lite.dts @@ -113,13 +113,13 @@ #size-cells = <0>; hub@1 { - compatible = "usb0424,9514"; + compatible = "usb424,9514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { - compatible = "usb0424,ec00"; + ethernet: ethernet@1 { + compatible = "usb424,ec00"; reg = <1>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/dts/src/arm/exynos5422-odroidxu3.dts b/dts/src/arm/exynos5422-odroidxu3.dts index cecaeb69e6..a378d4937f 100644 --- a/dts/src/arm/exynos5422-odroidxu3.dts +++ b/dts/src/arm/exynos5422-odroidxu3.dts @@ -80,13 +80,13 @@ #size-cells = <0>; hub@1 { - compatible = "usb0424,9514"; + compatible = "usb424,9514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { - compatible = "usb0424,ec00"; + ethernet: ethernet@1 { + compatible = "usb424,ec00"; reg = <1>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/dts/src/arm/exynos54xx.dtsi b/dts/src/arm/exynos54xx.dtsi index 2ddb7a5f12..3ec43761d8 100644 --- a/dts/src/arm/exynos54xx.dtsi +++ b/dts/src/arm/exynos54xx.dtsi @@ -74,7 +74,8 @@ }; mct: timer@101c0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5420-mct", + "samsung,exynos4210-mct"; reg = <0x101c0000 0xb00>; interrupts-extended = <&combiner 23 3>, <&combiner 23 4>, diff --git a/dts/src/arm/hpe-bmc-dl360gen10.dts b/dts/src/arm/hpe-bmc-dl360gen10.dts new file mode 100644 index 0000000000..3a7382ce40 --- /dev/null +++ b/dts/src/arm/hpe-bmc-dl360gen10.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for HPE DL360Gen10 + */ + +/include/ "hpe-gxp.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "hpe,gxp-dl360gen10", "hpe,gxp"; + model = "Hewlett Packard Enterprise ProLiant dl360 Gen10"; + + aliases { + serial0 = &uartc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x20000000>; + }; +}; diff --git a/dts/src/arm/hpe-gxp.dtsi b/dts/src/arm/hpe-gxp.dtsi new file mode 100644 index 0000000000..cf735b3c4f --- /dev/null +++ b/dts/src/arm/hpe-gxp.dtsi @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for HPE GXP + */ + +/dts-v1/; +/ { + model = "Hewlett Packard Enterprise GXP BMC"; + compatible = "hpe,gxp"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + device_type = "cpu"; + next-level-cache = <&L2>; + }; + }; + + clocks { + pll: clock-0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1600000000>; + }; + + iopclk: clock-1 { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clocks = <&pll>; + }; + }; + + axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + dma-ranges; + + L2: cache-controller@b0040000 { + compatible = "arm,pl310-cache"; + reg = <0xb0040000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + ahb@c0000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc0000000 0x30000000>; + dma-ranges; + + vic0: interrupt-controller@eff0000 { + compatible = "arm,pl192-vic"; + reg = <0xeff0000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + vic1: interrupt-controller@80f00000 { + compatible = "arm,pl192-vic"; + reg = <0x80f00000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uarta: serial@e0 { + compatible = "ns16550a"; + reg = <0xe0 0x8>; + interrupts = <17>; + interrupt-parent = <&vic0>; + clock-frequency = <1846153>; + reg-shift = <0>; + }; + + uartb: serial@e8 { + compatible = "ns16550a"; + reg = <0xe8 0x8>; + interrupts = <18>; + interrupt-parent = <&vic0>; + clock-frequency = <1846153>; + reg-shift = <0>; + }; + + uartc: serial@f0 { + compatible = "ns16550a"; + reg = <0xf0 0x8>; + interrupts = <19>; + interrupt-parent = <&vic0>; + clock-frequency = <1846153>; + reg-shift = <0>; + }; + + usb0: usb@efe0000 { + compatible = "hpe,gxp-ehci", "generic-ehci"; + reg = <0xefe0000 0x100>; + interrupts = <7>; + interrupt-parent = <&vic0>; + }; + + st: timer@80 { + compatible = "hpe,gxp-timer"; + reg = <0x80 0x16>; + interrupts = <0>; + interrupt-parent = <&vic0>; + clocks = <&iopclk>; + clock-names = "iop"; + }; + + usb1: usb@efe0100 { + compatible = "hpe,gxp-ohci", "generic-ohci"; + reg = <0xefe0100 0x110>; + interrupts = <6>; + interrupt-parent = <&vic0>; + }; + }; + }; +}; diff --git a/dts/src/arm/imx27.dtsi b/dts/src/arm/imx27.dtsi index fd525c3b16..b660c7d055 100644 --- a/dts/src/arm/imx27.dtsi +++ b/dts/src/arm/imx27.dtsi @@ -96,7 +96,7 @@ <&clks IMX27_CLK_DMA_AHB_GATE>; clock-names = "ipg", "ahb"; #dma-cells = <1>; - #dma-channels = <16>; + dma-channels = <16>; }; wdog: watchdog@10002000 { diff --git a/dts/src/arm/imx28-evk.dts b/dts/src/arm/imx28-evk.dts index 7e2b0f198d..1053b7c584 100644 --- a/dts/src/arm/imx28-evk.dts +++ b/dts/src/arm/imx28-evk.dts @@ -129,7 +129,7 @@ pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25vf016b", "jedec,spi-nor"; diff --git a/dts/src/arm/imx28-m28evk.dts b/dts/src/arm/imx28-m28evk.dts index f3bddc5ada..13acdc7916 100644 --- a/dts/src/arm/imx28-m28evk.dts +++ b/dts/src/arm/imx28-m28evk.dts @@ -33,7 +33,7 @@ pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80", "jedec,spi-nor"; diff --git a/dts/src/arm/imx28-sps1.dts b/dts/src/arm/imx28-sps1.dts index 43be7a6a76..90928db0df 100644 --- a/dts/src/arm/imx28-sps1.dts +++ b/dts/src/arm/imx28-sps1.dts @@ -51,7 +51,7 @@ pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "everspin,mr25h256", "mr25h256"; diff --git a/dts/src/arm/imx51-digi-connectcore-jsk.dts b/dts/src/arm/imx51-digi-connectcore-jsk.dts index aab8d6f137..10cae7c3a8 100644 --- a/dts/src/arm/imx51-digi-connectcore-jsk.dts +++ b/dts/src/arm/imx51-digi-connectcore-jsk.dts @@ -13,6 +13,13 @@ chosen { stdout-path = &uart1; }; + + usbphy1: usbphy1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; }; &esdhc1 { @@ -63,6 +70,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; + fsl,usbphy = <&usbphy1>; dr_mode = "host"; phy_type = "ulpi"; disable-over-current; diff --git a/dts/src/arm/imx51-digi-connectcore-som.dtsi b/dts/src/arm/imx51-digi-connectcore-som.dtsi index 7d4970417d..f0809a16a2 100644 --- a/dts/src/arm/imx51-digi-connectcore-som.dtsi +++ b/dts/src/arm/imx51-digi-connectcore-som.dtsi @@ -34,22 +34,22 @@ regulators { sw1_reg: sw1 { - regulator-min-microvolt = <1000000>; + regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; }; sw2_reg: sw2 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1275000>; regulator-boot-on; regulator-always-on; }; sw3_reg: sw3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1350000>; regulator-boot-on; regulator-always-on; }; @@ -102,18 +102,6 @@ regulator-always-on; }; - vgen1_reg: vgen1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - regulator-always-on; - }; - vgen3_reg: vgen3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -124,8 +112,6 @@ regulator-always-on; }; - gpo1_reg: gpo1 { }; - gpo2_reg: gpo2 { }; gpo3_reg: gpo3 { }; @@ -198,6 +184,7 @@ &usbotg { phy_type = "utmi_wide"; disable-over-current; + vbus-supply = <&swbst_reg>; /* Device role is not known, keep status disabled */ }; diff --git a/dts/src/arm/imx51.dtsi b/dts/src/arm/imx51.dtsi index 56c8d87864..1e20a6639e 100644 --- a/dts/src/arm/imx51.dtsi +++ b/dts/src/arm/imx51.dtsi @@ -215,6 +215,8 @@ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 43 5 1>, <&sdma 44 5 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -426,6 +428,8 @@ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, <&clks IMX5_CLK_UART1_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 18 4 1>, <&sdma 19 4 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -436,6 +440,8 @@ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 16 4 1>, <&sdma 17 4 2>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/dts/src/arm/imx6dl-colibri-aster.dts b/dts/src/arm/imx6dl-colibri-aster.dts new file mode 100644 index 0000000000..74e8a6cd8b --- /dev/null +++ b/dts/src/arm/imx6dl-colibri-aster.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include +#include +#include "imx6dl.dtsi" +#include "imx6qdl-colibri.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Aster Board"; + compatible = "toradex,colibri_imx6dl-aster", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + aliases { + i2c0 = &i2c2; + i2c1 = &i2c3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +/* Colibri SSP */ +&ecspi4 { + cs-gpios = < + &gpio5 2 GPIO_ACTIVE_HIGH + &gpio5 4 GPIO_ACTIVE_HIGH + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4 &pinctrl_csi_gpio_2>; + status = "okay"; +}; + +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ +&i2c3 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_csi_gpio_1 + &pinctrl_gpio_2 + &pinctrl_gpio_aster + &pinctrl_usbh_oc_1 + &pinctrl_usbc_id_1 + &pinctrl_weim_gpio_5 + >; + + pinctrl_gpio_aster: gpioaster { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +/* Colibri MMC */ +&usdhc1 { + status = "okay"; +}; diff --git a/dts/src/arm/imx6dl-colibri-eval-v3.dts b/dts/src/arm/imx6dl-colibri-eval-v3.dts index 7da74e6f46..7272edd85a 100644 --- a/dts/src/arm/imx6dl-colibri-eval-v3.dts +++ b/dts/src/arm/imx6dl-colibri-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -17,12 +17,6 @@ compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl", "fsl,imx6dl"; - /* Will be filled by the bootloader */ - memory@10000000 { - device_type = "memory"; - reg = <0x10000000 0>; - }; - aliases { i2c0 = &i2c2; i2c1 = &i2c3; @@ -44,67 +38,6 @@ clock-frequency = <16000000>; clock-output-names = "clk16m"; }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ - linux,code = ; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "bgr666"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; -}; - -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - status = "okay"; }; /* Colibri SSP */ @@ -113,40 +46,21 @@ mcp251x0: mcp251x@0 { compatible = "microchip,mcp2515"; - reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio3>; interrupts = <27 0x2>; + reg = <0>; spi-max-frequency = <10000000>; status = "okay"; }; }; -&hdmi { - status = "okay"; -}; - /* * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */ &i2c3 { status = "okay"; - /* - * Touchscreen is using SODIMM 28/30, also used for PWM, PWM, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcap_1>; - reg = <0x4a>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ - reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 */ - status = "disabled"; - }; - /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { compatible = "st,m41t0"; @@ -162,24 +76,6 @@ &pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6 &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1 >; - - pinctrl_pcap_1: pcap1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* SODIMM 28 */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SODIMM 30 */ - >; - }; - - pinctrl_mxt_ts: mxttsgrp { - fsl,pins = < - MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x130b0 /* SODIMM 107 */ - MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x130b0 /* SODIMM 106 */ - >; - }; -}; - -&ipu1_di0_disp0 { - remote-endpoint = <&lcd_display_in>; }; &pwm1 { diff --git a/dts/src/arm/imx6dl-colibri-iris-v2.dts b/dts/src/arm/imx6dl-colibri-iris-v2.dts new file mode 100644 index 0000000000..3a6d388976 --- /dev/null +++ b/dts/src/arm/imx6dl-colibri-iris-v2.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6dl-colibri-iris.dts" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Iris V2 Board"; + compatible = "toradex,colibri_imx6dl-iris-v2", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_vmmc>; + regulator-name = "3v3_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_iris &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1>; + + pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; +}; + +/* Colibri MMC */ +&usdhc1 { + cap-power-off-card; + /* uncomment the following to enable SD card UHS mode if you have a V1.1 module */ + /* /delete-property/ no-1-8-v; */ + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; diff --git a/dts/src/arm/imx6dl-colibri-iris.dts b/dts/src/arm/imx6dl-colibri-iris.dts new file mode 100644 index 0000000000..cf77d894f6 --- /dev/null +++ b/dts/src/arm/imx6dl-colibri-iris.dts @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include +#include +#include "imx6dl.dtsi" +#include "imx6qdl-colibri.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Iris Board"; + compatible = "toradex,colibri_imx6dl-iris", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + aliases { + i2c0 = &i2c2; + i2c1 = &i2c3; + }; + + aliases { + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +/* Colibri SSP */ +&ecspi4 { + status = "okay"; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_forceoff &pinctrl_uart23_forceoff>; + + /* + * uart-a-on-x13-enable turns the UART transceiver for UART_A on. If one + * wants to turn the transceiver off, that property has to be deleted + * and the gpio handled in userspace. + * The same applies to uart-b-c-on-x14-enable where the UART_B and + * UART_C transceiver is turned on. + */ + uart-a-on-x13-enable-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */ + output-high; + }; + + uart-b-c-on-x14-enable-hog { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */ + output-high; + }; +}; + +/* + * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) + */ +&i2c3 { + status = "okay"; + + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_gpio_iris + &pinctrl_usbh_oc_1 + &pinctrl_usbc_id_1 + >; + + pinctrl_gpio_iris: gpioirisgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0 + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x1b0b0 + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 + >; + }; + + pinctrl_uart1_forceoff: uart1forceoffgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + >; + }; + + pinctrl_uart23_forceoff: uart23forceoffgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + >; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +/* Colibri MMC */ +&usdhc1 { + status = "okay"; +}; diff --git a/dts/src/arm/imx6dl-colibri-v1_1-eval-v3.dts b/dts/src/arm/imx6dl-colibri-v1_1-eval-v3.dts deleted file mode 100644 index 223275f028..0000000000 --- a/dts/src/arm/imx6dl-colibri-v1_1-eval-v3.dts +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2020 Toradex - */ - -/dts-v1/; - -#include "imx6dl-colibri-eval-v3.dts" -#include "imx6qdl-colibri-v1_1-uhs.dtsi" - -/ { - model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3"; - compatible = "toradex,colibri_imx6dl-v1_1-eval-v3", - "toradex,colibri_imx6dl-v1_1", - "toradex,colibri_imx6dl-eval-v3", - "toradex,colibri_imx6dl", - "fsl,imx6dl"; -}; - -/* Colibri MMC */ -&usdhc1 { - status = "okay"; - /* - * Please make sure your carrier board does not pull-up any of - * the MMC/SD signals to 3.3 volt before attempting to activate - * UHS-I support. - * To let signaling voltage be changed to 1.8V, please - * delete no-1-8-v property (example below): - * /delete-property/no-1-8-v; - */ -}; diff --git a/dts/src/arm/imx6dl-eckelmann-ci4x10.dts b/dts/src/arm/imx6dl-eckelmann-ci4x10.dts index b4a9523e32..864dc50184 100644 --- a/dts/src/arm/imx6dl-eckelmann-ci4x10.dts +++ b/dts/src/arm/imx6dl-eckelmann-ci4x10.dts @@ -297,7 +297,11 @@ phy-mode = "rmii"; phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; phy-handle = <&phy>; - clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&rmii_clk>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; status = "okay"; mdio { diff --git a/dts/src/arm/imx6dl-plybas.dts b/dts/src/arm/imx6dl-plybas.dts index bf72a67a9c..c52e6caf39 100644 --- a/dts/src/arm/imx6dl-plybas.dts +++ b/dts/src/arm/imx6dl-plybas.dts @@ -214,7 +214,7 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; linux,rs485-enabled-at-boot-time; rs485-rts-delay = <0 20>; status = "okay"; diff --git a/dts/src/arm/imx6dl-rex-basic.dts b/dts/src/arm/imx6dl-rex-basic.dts index 0f1616bfa9..b72f8ea1e6 100644 --- a/dts/src/arm/imx6dl-rex-basic.dts +++ b/dts/src/arm/imx6dl-rex-basic.dts @@ -19,7 +19,7 @@ }; &ecspi3 { - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/dts/src/arm/imx6dl-victgo.dts b/dts/src/arm/imx6dl-victgo.dts index 227c952543..516ec915a9 100644 --- a/dts/src/arm/imx6dl-victgo.dts +++ b/dts/src/arm/imx6dl-victgo.dts @@ -5,46 +5,13 @@ */ /dts-v1/; -#include -#include -#include -#include -#include -#include #include "imx6dl.dtsi" +#include "imx6qdl-vicut1.dtsi" / { model = "Kverneland TGO"; compatible = "kvg,victgo", "fsl,imx6dl"; - chosen { - stdout-path = &uart4; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_backlight>; - pwms = <&pwm1 0 5000000 0>; - brightness-levels = <0 16 64 255>; - num-interpolated-steps = <16>; - default-brightness-level = <1>; - power-supply = <®_3v3>; - enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; - }; - - connector { - compatible = "composite-video-connector"; - label = "Composite0"; - sdtv-standards = ; - - port { - comp0_out: endpoint { - remote-endpoint = <&tvp5150_comp0_in>; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -71,36 +38,9 @@ io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds>; - - led-0 { - label = "debug0"; - function = LED_FUNCTION_HEARTBEAT; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - led-1 { - label = "debug1"; - function = LED_FUNCTION_DISK; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "disk-activity"; - }; - - led-2 { - label = "power_led"; - function = LED_FUNCTION_POWER; - gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - panel { - compatible = "kyo,tcg121xglp"; - backlight = <&backlight>; + compatible = "lg,lb070wv8"; + backlight = <&backlight_lcd>; power-supply = <®_3v3>; port { @@ -116,38 +56,6 @@ clock-frequency = <50000000>; }; - reg_1v8: regulator-1v8 { - compatible = "regulator-fixed"; - regulator-name = "1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_h1_vbus: regulator-h1-vbus { - compatible = "regulator-fixed"; - regulator-name = "h1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_otg_vbus: regulator-otg-vbus { - compatible = "regulator-fixed"; - regulator-name = "otg-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - rotary-encoder { compatible = "rotary-encoder"; pinctrl-0 = <&pinctrl_rotary_ch>; @@ -160,33 +68,6 @@ wakeup-source; }; - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "prti6q-sgtl5000"; - simple-audio-card,format = "i2s"; - simple-audio-card,widgets = - "Microphone", "Microphone Jack", - "Line", "Line In Jack", - "Headphone", "Headphone Jack", - "Speaker", "External Speaker"; - simple-audio-card,routing = - "MIC_IN", "Microphone Jack", - "LINE_IN", "Line In Jack", - "Headphone Jack", "HP_OUT", - "External Speaker", "LINE_OUT"; - - simple-audio-card,cpu { - sound-dai = <&ssi1>; - system-clock-frequency = <0>; - }; - - simple-audio-card,codec { - sound-dai = <&codec>; - bitclock-master; - frame-master; - }; - }; - thermal-zones { chassis-thermal { polling-delay = <20000>; @@ -213,7 +94,6 @@ <&adc_ts 5>; io-channel-names = "y", "z1", "z2", "x"; touchscreen-min-pressure = <64687>; - touchscreen-inverted-x; touchscreen-inverted-y; touchscreen-x-plate-ohms = <300>; touchscreen-y-plate-ohms = <800>; @@ -254,61 +134,6 @@ }; }; -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; - - mux-ssi1 { - fsl,audmux-port = <0>; - fsl,port-config = < - IMX_AUDMUX_V2_PTCR_SYN 0 - IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 - IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 - IMX_AUDMUX_V2_PTCR_TFSDIR 0 - IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) - >; - }; - - mux-pins3 { - fsl,audmux-port = <2>; - fsl,port-config = < - IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) - 0 IMX_AUDMUX_V2_PDCR_TXRXEN - >; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can1>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can2>; - status = "okay"; -}; - -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; -}; - -&ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - }; -}; - &ecspi2 { cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -385,36 +210,19 @@ "CAM2_MIRROR", "", "", "SMBALERT", "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", - "SD1_DATA3", "", "", - "", "", "", "", "", "", "", ""; -}; - -&gpio2 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", - "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", - "", "", "", "", "", "", "ISB_IN1", "ON_SWITCH", - "POWER_LED", "", "", "", "", "", "", ""; -}; - -&gpio3 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", - "CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ", - "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0", - "YACO_RESET"; + "SD1_DATA3", "ETH_MDIO", "", + "", "", "", "", "", "", "", "ETH_MDC"; }; &gpio4 { gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX", - "", "", "DIP1_FB", "", "VCAM_EN", "", "", "", - "CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN", - "BL_PWM", "ETH_INTRP", "ISB_LED"; + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", + "HITCH_IN_OUT", + "LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN", + "BL_PWM", "ETH_INT", "ISB_LED"; }; &gpio5 { @@ -422,51 +230,22 @@ "", "", "", "", "", "", "", "", "TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO", "ECSPI2_SS0", "ECSPI2_SCLK", "", "", - "", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; }; -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - codec: audio-codec@a { - compatible = "fsl,sgtl5000"; - reg = <0xa>; - #sound-dai-cells = <0>; - clocks = <&clks 201>; - VDDA-supply = <®_3v3>; - VDDIO-supply = <®_3v3>; - VDDD-supply = <®_1v8>; - }; - - video-decoder@5c { - compatible = "ti,tvp5150"; - reg = <0x5c>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tvp5150_comp0_in: endpoint { - remote-endpoint = <&comp0_out>; - }; - }; - - /* Output port 2 is video output pad */ - port@2 { - reg = <2>; - - tvp5151_to_ipu1_csi0_mux: endpoint { - remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; - }; - }; - }; +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; +&i2c1 { keypad@70 { compatible = "holtek,ht16k33"; pinctrl-names = "default"; @@ -490,225 +269,9 @@ MATRIX_KEY(6, 1, KEY_F1) >; }; - - /* additional i2c devices are added automatically by the boot loader */ -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; - - adc@49 { - compatible = "ti,ads1015"; - reg = <0x49>; - #address-cells = <1>; - #size-cells = <0>; - - channel@4 { - reg = <4>; - ti,gain = <3>; - ti,datarate = <3>; - }; - - channel@5 { - reg = <5>; - ti,gain = <3>; - ti,datarate = <3>; - }; - - channel@6 { - reg = <6>; - ti,gain = <3>; - ti,datarate = <3>; - }; - - channel@7 { - reg = <7>; - ti,gain = <3>; - ti,datarate = <3>; - }; - }; - - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - tsens0: temperature-sensor@70 { - compatible = "ti,tmp103"; - reg = <0x70>; - #thermal-sensor-cells = <0>; - }; -}; - -&ipu1_csi0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_csi0>; - status = "okay"; -}; - -&ipu1_csi0_mux_from_parallel_sensor { - remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>; -}; - -&ldb { - status = "okay"; - - lvds-channel@0 { - status = "okay"; - - port@4 { - reg = <4>; - - lvds0_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; -}; - -&pwm1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&ssi1 { - #sound-dai-cells = <0>; - fsl,mode = "ac97-slave"; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_h1_vbus>; - pinctrl-names = "default"; - phy_type = "utmi"; - dr_mode = "host"; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - phy_type = "utmi"; - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - no-1-8-v; - disable-wp; - cap-sd-highspeed; - no-mmc; - no-sdio; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - bus-width = <8>; - no-1-8-v; - non-removable; - no-sd; - no-sdio; - status = "okay"; }; &iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - pinctrl_audmux: audmuxgrp { - fsl,pins = < - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - >; - }; - - pinctrl_backlight: backlightgrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 - >; - }; - - pinctrl_can1: can1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 - /* CAN1_SR */ - MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 - /* CAN1_TERM */ - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088 - >; - }; - - pinctrl_can2: can2grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 - MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 - /* CAN2_SR */ - MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008 - >; - }; - - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - /* CS */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 - >; - }; - pinctrl_ecspi2: ecspi2grp { fsl,pins = < MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 @@ -747,113 +310,12 @@ >; }; - pinctrl_hog: hoggrp { - fsl,pins = < - /* ITU656_nRESET */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 - /* CAM1_MIRROR */ - MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0 - /* CAM2_MIRROR */ - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 - /* CAM_nDETECT */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - /* ISB_IN1 */ - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 - /* ISB_nIN2 */ - MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 - /* WARN_LIGHT */ - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0 - /* ON2_FB */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 - /* YACO_nIRQ */ - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 - /* YACO_BOOT0 */ - MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0 - /* YACO_nRESET */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 - /* FORCE_ON1 */ - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 - /* AUDIO_nRESET */ - MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0 - /* ITU656_nPDN */ - MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 - - /* HW revision detect */ - /* REV_ID0 */ - MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 - /* REV_ID1 is shared with PWM3 */ - /* REV_ID2 */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 - /* REV_ID3 */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 - /* REV_ID4 */ - MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 - - /* New in HW revision 1 */ - /* ON1_FB */ - MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 - /* DIP1_FB */ - MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; - - pinctrl_ipu1_csi0: ipu1csi0grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 - >; - }; - pinctrl_keypad: keypadgrp { fsl,pins = < MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 >; }; - pinctrl_leds: ledsgrp { - fsl,pins = < - /* DEBUG0 */ - MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0 - /* DEBUG1 */ - MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 - /* POWER_LED */ - MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 - >; - }; - - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 - >; - }; - - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 - >; - }; - pinctrl_rotary_ch: rotarychgrp { fsl,pins = < MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 @@ -867,77 +329,4 @@ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 >; }; - - /* YaCO AUX Uart */ - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; - - /* YaCO Touchscreen UART */ - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 - /* power enable, high active */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 - MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 - MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 - >; - }; }; diff --git a/dts/src/arm/imx6dl-vicut1.dts b/dts/src/arm/imx6dl-vicut1.dts index 174fd913bf..5035d30344 100644 --- a/dts/src/arm/imx6dl-vicut1.dts +++ b/dts/src/arm/imx6dl-vicut1.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1 Board"; diff --git a/dts/src/arm/imx6q-ba16.dtsi b/dts/src/arm/imx6q-ba16.dtsi index 6330d75f8f..f266f1b7e0 100644 --- a/dts/src/arm/imx6q-ba16.dtsi +++ b/dts/src/arm/imx6q-ba16.dtsi @@ -142,7 +142,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: n25q032@0 { + flash: flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/imx6q-bosch-acc.dts b/dts/src/arm/imx6q-bosch-acc.dts new file mode 100644 index 0000000000..8768222e18 --- /dev/null +++ b/dts/src/arm/imx6q-bosch-acc.dts @@ -0,0 +1,779 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support for the i.MX6-based Bosch ACC board. + * + * Copyright (C) 2016 Garz & Fricke GmbH + * Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher + * Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie + * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker + * Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner + */ + +/dts-v1/; + +#include +#include +#include "imx6q.dtsi" + +/ { + model = "Bosch ACC"; + compatible = "bosch,imx6q-acc", "fsl,imx6q"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc4; + mmc1 = &usdhc2; + serial0 = &uart2; + serial1 = &uart1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 200000>; + brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>; + num-interpolated-steps = <10>; + default-brightness-level = <60>; + power-supply = <®_lcd>; + }; + + panel { + compatible = "dataimage,fg1001l0dsswmg01"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + refclk: refclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "12mhz_refclk"; + assigned-clocks = <&clks IMX6QDL_CLK_CKO>, + <&clks IMX6QDL_CLK_CKO2>, + <&clks IMX6QDL_CLK_CKO2_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>, + <&clks IMX6QDL_CLK_CKO2_PODF>, + <&clks IMX6QDL_CLK_OSC>; + assigned-clock-rates = <0>, <12000000>, <0>; + }; + + cpus { + cpu0: cpu@0 { + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1225000 + 852000 1225000 + 792000 1150000 + 396000 950000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1225000 + 996000 1175000 + 852000 1175000 + 792000 1150000 + 396000 1150000 + >; + }; + + cpu1: cpu@1 { + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1225000 + 852000 1225000 + 792000 1150000 + 396000 950000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1225000 + 996000 1175000 + 852000 1175000 + 792000 1150000 + 396000 1150000 + >; + }; + }; + + pwm-leds { + compatible = "pwm-leds"; + + led_red: led-0 { + color = ; + max-brightness = <248>; + default-state = "off"; + pwms = <&pwm2 0 500000>; + }; + + led_white: led-1 { + color = ; + max-brightness = <248>; + default-state = "off"; + pwms = <&pwm3 0 500000>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_gpio_led>; + + led-2 { + color = ; + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_5p0: regulator-5p0 { + compatible = "regulator-fixed"; + regulator-name = "5p0"; + }; + + reg_vin: regulator-vin { + compatible = "regulator-fixed"; + regulator-name = "VIN"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <4500000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_usb_h2_vbus: regulator-usb-h2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5p0> ; + regulator-always-on; + }; + + reg_vsnvs: regulator-vsnvs { + compatible = "regulator-fixed"; + regulator-name = "VSNVS_3V0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "LCD0 POWER"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_enable>; + gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + reg_dac: regulator-dac { + compatible = "regulator-fixed"; + regulator-name = "vref_dac"; + regulator-min-microvolt = <20000>; + regulator-max-microvolt = <20000>; + vin-supply = <®_5p0> ; + regulator-boot-on; + }; + + reg_sw4: regulator-sw4 { + compatible = "regulator-fixed"; + regulator-name = "SW4_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_sys: regulator-sys { + compatible = "regulator-fixed"; + regulator-name = "SYS_4V2"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; +}; + +®_arm { + vin-supply = <&sw2_reg>; +}; + +®_soc { + vin-supply = <&sw1c_reg>; +}; + +®_vdd1p1 { + vin-supply = <®_vsnvs>; +}; + +®_vdd2p5 { + vin-supply = <®_vsnvs>; +}; + +®_vdd3p0 { + vin-supply = <®_vsnvs>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; + phy-mode = "rmii"; + phy-supply = <®_sw4>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + smsc,disable-energy-detect; + }; + }; +}; + +&gpu_vg { + status = "disabled"; +}; + +&gpu_2d { + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + pmic: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1c_reg: sw1c { + regulator-name = "VDD_SOC (sw1abc)"; + regulator-min-microvolt = <1275000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-name = "VDD_ARM (sw2)"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + compatible = "regulator-fixed"; + regulator-name = "DDR_1V5a"; + regulator-boot-on; + regulator-always-on; + + }; + + sw3b_reg: sw3b { + compatible = "regulator-fixed"; + regulator-name = "DDR_1V5b"; + regulator-boot-on; + regulator-always-on; + + }; + + sw4_reg: sw4 { + regulator-name = "AUX 3V15 (sw4)"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + regulator-always-on; + status = "disabled"; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + lm75: sensor@49 { + compatible = "national,lm75b"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lm75>; + reg = <0x49>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc: rtc@51 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + eeprom_ext: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; + + usb3503: usb@8 { + compatible = "smsc,usb3503"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3503>; + reg = <0x08>; + connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */ + intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */ + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */ + initial-mode = <1>; + clocks = <&refclk>; + clock-names = "refclk"; + refclk-frequency = <12000000>; + }; + + exc3000: touchscreen@2a { + compatible = "eeti,exc3000"; + reg = <0x2a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctouch>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + }; + + vcnl4035: light-sensor@60 { + compatible = "vishay,vcnl4035"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_proximity>; + reg = <0x60>; + }; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm1 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbh2 { + pinctrl-names = "idle", "active"; + pinctrl-0 = <&pinctrl_usbh2_idle>; + pinctrl-1 = <&pinctrl_usbh2_active>; + vbus-supply = <®_usb_h2_vbus>; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + disable-over-current; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbphynop1 { + clocks = <&clks IMX6QDL_CLK_USBPHY1>; + clock-names = "main_clk"; + vcc-supply = <®_usb_h1_vbus>; +}; + +&usbphynop2 { + vcc-supply = <®_usb_h2_vbus>; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + enable-sdio-wakeup; + voltage-ranges = <3300 3300>; + vmmc-supply = <®_sw4>; + fsl,wp-controller; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + voltage-ranges = <3300 3300>; + vmmc-supply = <®_sw4>; + fsl,wp-controller; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; + timeout-sec=<10>; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 /* FEC INT */ + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_reset_gpio_led: reset-gpio-led-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_lcd_enable: lcdenablegrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* lcd enable */ + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 /* sel6_8 */ + >; + }; + + pinctrl_lm75: lm75grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; + + pinctrl_proximity: proximitygrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0 + >; + }; + + pinctrl_rtc: rtc-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */ + >; + }; + + pinctrl_ctouch: ctouch-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */ + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbh2_idle: usbh2-idle-grp { + fsl,pins = < + MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018 + MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018 + >; + }; + + pinctrl_usbh2_active: usbh2-active-grp { + fsl,pins = < + MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018 + MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018 + >; + }; + + pinctrl_usb3503: usb3503-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x00000018 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* USB INT */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */ + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 /* USB Connect */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017069 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00010038 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069 + MX6QDL_PAD_GPIO_4__SD2_CD_B 0x0001b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x00017059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x00010059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059 + >; + }; + + pinctrl_wdog1: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/dts/src/arm/imx6q-bx50v3.dtsi b/dts/src/arm/imx6q-bx50v3.dtsi index 10922375c5..ead83091e1 100644 --- a/dts/src/arm/imx6q-bx50v3.dtsi +++ b/dts/src/arm/imx6q-bx50v3.dtsi @@ -160,7 +160,7 @@ pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: m25p80@0 { + m25_eeprom: flash@0 { compatible = "atmel,at25"; spi-max-frequency = <10000000>; size = <0x8000>; diff --git a/dts/src/arm/imx6q-cm-fx6.dts b/dts/src/arm/imx6q-cm-fx6.dts index bfb530f29d..1ad41c944b 100644 --- a/dts/src/arm/imx6q-cm-fx6.dts +++ b/dts/src/arm/imx6q-cm-fx6.dts @@ -260,7 +260,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p", "jedec,spi-nor"; diff --git a/dts/src/arm/imx6q-dmo-edmqmx6.dts b/dts/src/arm/imx6q-dmo-edmqmx6.dts index c713ac03b3..9591848cbd 100644 --- a/dts/src/arm/imx6q-dmo-edmqmx6.dts +++ b/dts/src/arm/imx6q-dmo-edmqmx6.dts @@ -102,7 +102,7 @@ cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; diff --git a/dts/src/arm/imx6q-dms-ba16.dts b/dts/src/arm/imx6q-dms-ba16.dts index 48fb47e715..137db38f0d 100644 --- a/dts/src/arm/imx6q-dms-ba16.dts +++ b/dts/src/arm/imx6q-dms-ba16.dts @@ -47,7 +47,7 @@ pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: m25p80@0 { + m25_eeprom: flash@0 { compatible = "atmel,at25256B", "atmel,at25"; spi-max-frequency = <20000000>; size = <0x8000>; diff --git a/dts/src/arm/imx6q-gw5400-a.dts b/dts/src/arm/imx6q-gw5400-a.dts index 4cde45d5c9..e894faba57 100644 --- a/dts/src/arm/imx6q-gw5400-a.dts +++ b/dts/src/arm/imx6q-gw5400-a.dts @@ -137,7 +137,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,w25q256", "jedec,spi-nor"; spi-max-frequency = <30000000>; reg = <0>; diff --git a/dts/src/arm/imx6q-marsboard.dts b/dts/src/arm/imx6q-marsboard.dts index 05ee283882..cc18010023 100644 --- a/dts/src/arm/imx6q-marsboard.dts +++ b/dts/src/arm/imx6q-marsboard.dts @@ -100,7 +100,7 @@ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/dts/src/arm/imx6q-rex-pro.dts b/dts/src/arm/imx6q-rex-pro.dts index 1767e1a3cd..271f4b2d9b 100644 --- a/dts/src/arm/imx6q-rex-pro.dts +++ b/dts/src/arm/imx6q-rex-pro.dts @@ -19,7 +19,7 @@ }; &ecspi3 { - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf032b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/dts/src/arm/imx6q-vicut1.dts b/dts/src/arm/imx6q-vicut1.dts index 0a4e251be1..dd91aff3f9 100644 --- a/dts/src/arm/imx6q-vicut1.dts +++ b/dts/src/arm/imx6q-vicut1.dts @@ -6,12 +6,9 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1Q Board"; compatible = "kvg,vicut1q", "fsl,imx6q"; }; - -&sata { - status = "okay"; -}; diff --git a/dts/src/arm/imx6qdl-aristainetos.dtsi b/dts/src/arm/imx6qdl-aristainetos.dtsi index e21f6ac864..baa197c900 100644 --- a/dts/src/arm/imx6qdl-aristainetos.dtsi +++ b/dts/src/arm/imx6qdl-aristainetos.dtsi @@ -96,7 +96,7 @@ pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128a11", "jedec,spi-nor"; diff --git a/dts/src/arm/imx6qdl-aristainetos2.dtsi b/dts/src/arm/imx6qdl-aristainetos2.dtsi index 0b90c3f59f..6b64b2fc39 100644 --- a/dts/src/arm/imx6qdl-aristainetos2.dtsi +++ b/dts/src/arm/imx6qdl-aristainetos2.dtsi @@ -131,7 +131,7 @@ pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; - flash: m25p80@1 { + flash: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128a11", "jedec,spi-nor"; diff --git a/dts/src/arm/imx6qdl-colibri-v1_1-uhs.dtsi b/dts/src/arm/imx6qdl-colibri-v1_1-uhs.dtsi deleted file mode 100644 index 7672fbfc29..0000000000 --- a/dts/src/arm/imx6qdl-colibri-v1_1-uhs.dtsi +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2020 Toradex - */ - -&iomuxc { - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 - >; - }; -}; - -/* Colibri MMC */ -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; - vmmc-supply = <®_module_3v3>; - vqmmc-supply = <&vgen3_reg>; - wakeup-source; - keep-power-in-suspend; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; -}; diff --git a/dts/src/arm/imx6qdl-colibri.dtsi b/dts/src/arm/imx6qdl-colibri.dtsi index 4e2a309c93..c383e0e411 100644 --- a/dts/src/arm/imx6qdl-colibri.dtsi +++ b/dts/src/arm/imx6qdl-colibri.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -13,13 +13,79 @@ backlight: backlight { compatible = "pwm-backlight"; + brightness-levels = <0 127 191 223 239 247 251 255>; + default-brightness-level = <1>; + enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; + power-supply = <®_module_3v3>; pwms = <&pwm3 0 5000000>; - enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ status = "disabled"; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + debounce-interval = <10>; + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ + label = "Wake-Up"; + linux,code = ; + wakeup-source; + }; + }; + + lcd_display: disp0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + /* Will be filled by the bootloader */ + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0>; + }; + + panel_dpi: panel-dpi { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; regulator-name = "+V3.3"; @@ -38,36 +104,36 @@ reg_usb_host_vbus: regulator-usb-host-vbus { compatible = "regulator-fixed"; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; - regulator-name = "usb_host_vbus"; - regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ + regulator-min-microvolt = <5000000>; + regulator-name = "usb_host_vbus"; status = "disabled"; }; sound { compatible = "fsl,imx-audio-sgtl5000"; - model = "imx6dl-colibri-sgtl5000"; - ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = "Headphone Jack", "HP_OUT", "LINE_IN", "Line In Jack", "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias"; + model = "imx6dl-colibri-sgtl5000"; mux-int-port = <1>; mux-ext-port = <5>; + ssi-controller = <&ssi1>; }; /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; spdif-controller = <&spdif>; spdif-in; spdif-out; + model = "imx-spdif"; status = "disabled"; }; }; @@ -92,6 +158,10 @@ status = "disabled"; }; +&clks { + fsl,pmic-stby-poweroff; +}; + /* Colibri SSP */ &ecspi4 { cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; @@ -101,10 +171,10 @@ }; &fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; phy-handle = <ðphy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; status = "okay"; mdio { @@ -118,6 +188,224 @@ }; }; +&gpio1 { + gpio-line-names = "", + "SODIMM_67", + "SODIMM_180", + "SODIMM_196", + "SODIMM_174", + "SODIMM_176", + "SODIMM_194", + "SODIMM_55", + "SODIMM_63", + "SODIMM_28", + "SODIMM_93", + "SODIMM_69", + "SODIMM_99", + "SODIMM_130", + "SODIMM_106", + "SODIMM_98", + "SODIMM_192", + "SODIMM_49", + "SODIMM_190", + "SODIMM_51", + "SODIMM_47", + "SODIMM_53", + "", + "SODIMM_22"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_132", + "SODIMM_134", + "SODIMM_135", + "SODIMM_133", + "SODIMM_102", + "SODIMM_43", + "SODIMM_127", + "SODIMM_37", + "SODIMM_104", + "SODIMM_59", + "SODIMM_30", + "SODIMM_100", + "SODIMM_38", + "SODIMM_34", + "SODIMM_32", + "SODIMM_36", + "SODIMM_59", + "SODIMM_67", + "SODIMM_97", + "SODIMM_79", + "SODIMM_103", + "SODIMM_101", + "SODIMM_45", + "SODIMM_105", + "SODIMM_107", + "SODIMM_91", + "SODIMM_89", + "SODIMM_150", + "SODIMM_126", + "SODIMM_128", + "", + "SODIMM_94"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_111", + "SODIMM_113", + "SODIMM_115", + "SODIMM_117", + "SODIMM_119", + "SODIMM_121", + "SODIMM_123", + "SODIMM_125", + "SODIMM_110", + "SODIMM_112", + "SODIMM_114", + "SODIMM_116", + "SODIMM_118", + "SODIMM_120", + "SODIMM_122", + "SODIMM_124", + "", + "SODIMM_96", + "SODIMM_77", + "SODIMM_25", + "SODIMM_27", + "SODIMM_88", + "SODIMM_90", + "SODIMM_31", + "SODIMM_23", + "SODIMM_29", + "SODIMM_71", + "SODIMM_73", + "SODIMM_92", + "SODIMM_81", + "SODIMM_131", + "SODIMM_129"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "SODIMM_168", + "", + "", + "", + "", + "SODIMM_184", + "SODIMM_186", + "HDMI_15", + "HDMI_16", + "SODIMM_178", + "SODIMM_188", + "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "SODIMM_24", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_95", + "", + "SODIMM_86", + "", + "SODIMM_65", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_136", + "SODIMM_138", + "SODIMM_140", + "SODIMM_142", + "SODIMM_144", + "SODIMM_146", + "SODIMM_172", + "SODIMM_170", + "SODIMM_149", + "SODIMM_151", + "SODIMM_153", + "SODIMM_155", + "SODIMM_157", + "SODIMM_159", + "SODIMM_161", + "SODIMM_163", + "SODIMM_33", + "SODIMM_35", + "SODIMM_165", + "SODIMM_167"; +}; + +&gpio6 { + gpio-line-names = "SODIMM_169", + "SODIMM_171", + "SODIMM_173", + "SODIMM_175", + "SODIMM_177", + "SODIMM_179", + "SODIMM_85", + "SODIMM_166", + "SODIMM_160", + "SODIMM_162", + "SODIMM_158", + "SODIMM_164", + "", + "", + "SODIMM_156", + "SODIMM_75", + "SODIMM_154", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_152"; +}; + +&gpio7 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_19", + "SODIMM_21", + "", + "SODIMM_137"; +}; + &hdmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hdmi_ddc>; @@ -132,65 +420,66 @@ clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; - pinctrl-0 = <&pinctrl_i2c2_gpio>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; + fsl,pmic-stby-poweroff; reg = <0x08>; regulators { sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1975000>; + regulator-min-microvolt = <400000>; }; swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5150000>; + regulator-min-microvolt = <5000000>; }; snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <1000000>; }; vref_reg: vrefddr { - regulator-boot-on; regulator-always-on; + regulator-boot-on; }; /* vgen1: unused */ vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1550000>; + regulator-min-microvolt = <800000>; }; /* @@ -198,57 +487,58 @@ * the i.MX 6 NVCC_SD1. */ vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; }; vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; }; }; codec: sgtl5000@a { compatible = "fsl,sgtl5000"; - reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; + lrclk-strength = <3>; + reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; VDDD-supply = <&vgen4_reg>; - lrclk-strength = <3>; }; /* STMPE811 touch screen controller */ stmpe811@41 { compatible = "st,stmpe811"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch_int>; - reg = <0x41>; + blocks = <0x5>; interrupts = <20 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio6>; interrupt-controller; id = <0>; - blocks = <0x5>; irq-trigger = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + reg = <0x41>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 12-bit ADC */ @@ -258,7 +548,7 @@ /* ADC converstion time: 80 clocks */ st,sample-time = <4>; - stmpe_touchscreen { + stmpe_ts: stmpe_touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; @@ -273,9 +563,10 @@ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; + status = "disabled"; }; - stmpe_adc { + stmpe_adc: stmpe_adc { compatible = "st,stmpe-adc"; /* forbid to use ADC channels 3-0 (touch) */ st,norequest-mask = <0x0F>; @@ -294,6 +585,21 @@ scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; + + atmel_mxt_ts: touchscreen@4a { + compatible = "atmel,maxtouch"; + interrupt-parent = <&gpio2>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_atmel_conn>; + reg = <0x4a>; + reset-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; /* SODIMM 106 */ + status = "disabled"; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; }; /* Colibri PWM */ @@ -338,27 +644,27 @@ /* Colibri UART_A */ &uart1 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; /* Colibri UART_B */ &uart2 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_dte>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; /* Colibri UART_C */ &uart3 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_dte>; - fsl,dte-mode; status = "disabled"; }; @@ -370,24 +676,28 @@ /* Colibri MMC */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ - disable-wp; - vqmmc-supply = <®_module_3v3>; bus-width = <4>; no-1-8-v; + disable-wp; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; + pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_mmc_cd_sleep>; + vmmc-supply = <®_module_3v3>; + vqmmc-supply = <&vgen3_reg>; status = "disabled"; }; /* eMMC */ &usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_module_3v3>; bus-width = <8>; no-1-8-v; non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vqmmc-supply = <®_module_3v3>; status = "okay"; }; @@ -405,14 +715,36 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh_oc_1>; + /* Atmel MXT touchsceen + Capacitive Touch Adapter */ + /* NOTE: This pin group conflicts with pin groups + * pinctrl_pwm1/pinctrl_pwm4. Don't use them simultaneously. + */ + pinctrl_atmel_adap: atmeladaptergrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0xb0b1 /* SODIMM 28 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0xb0b1 /* SODIMM 30 */ + >; + }; + + /* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */ + /* NOTE: This pin group conflicts with pin groups pinctrl_weim_cs1 and + * pinctrl_weim_cs2. Don't use them simultaneously. + */ + pinctrl_atmel_conn: atmelconnectorgrp { + fsl,pins = < + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0xb0b1 /* SODIMM_107 */ + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0xb0b1 /* SODIMM_106 */ + >; + }; + pinctrl_audmux: audmuxgrp { fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 >; }; @@ -423,28 +755,52 @@ >; }; + /* CSI pins used as GPIOs */ + pinctrl_csi_gpio_1: csigpio1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b0b0 + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x130b0 + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x1b0b0 + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0 + MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x1b0b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 + >; + }; + + pinctrl_csi_gpio_2: csigpio2grp { + fsl,pins = < + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 + >; + }; + pinctrl_ecspi4: ecspi4grp { fsl,pins = < + /* SPI CS */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - /* SPI CS */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 >; }; pinctrl_enet: enetgrp { fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) + MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) >; }; @@ -462,13 +818,32 @@ >; }; - pinctrl_gpio_bl_on: gpioblon { + pinctrl_gpio_1: gpio1grp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; + pinctrl_gpio_2: gpio2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_gpio_bl_on: gpioblongrp { fsl,pins = < MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 >; }; - pinctrl_gpio_keys: gpiokeys { + pinctrl_gpio_keys: gpiokeysgrp { fsl,pins = < MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 >; @@ -483,15 +858,15 @@ pinctrl_i2c2: i2c2grp { fsl,pins = < - MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 >; }; - pinctrl_i2c2_gpio: i2c2grp { + pinctrl_i2c2_gpio: i2c2gpiogrp { fsl,pins = < - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1 MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1 >; }; @@ -523,8 +898,8 @@ MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0xb0b1 MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0xb0b1 /* Disable PWM pins on camera interface */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x40 + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 >; }; @@ -555,19 +930,34 @@ >; }; - pinctrl_mic_gnd: gpiomicgnd { + pinctrl_lvds_transceiver: lvdstxgrp { + fsl,pins = < + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x03030 /* SODIMM 95 */ + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b030 /* SODIMM 55 */ + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x03030 /* SODIMM 63 */ + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x03030 /* SODIMM 99 */ + >; + }; + + pinctrl_mic_gnd: micgndgrp { fsl,pins = < /* Controls Mic GND, PU or '1' pull Mic GND to GND */ MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0 >; }; - pinctrl_mmc_cd: gpiommccd { + pinctrl_mmc_cd: mmccdgrp { fsl,pins = < MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b1 >; }; + pinctrl_mmc_cd_sleep: mmccdslpgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x0 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 @@ -576,15 +966,15 @@ pinctrl_pwm2: pwm2grp { fsl,pins = < - MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x00040 + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 >; }; pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x00040 + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 >; }; @@ -601,13 +991,6 @@ >; }; - pinctrl_usbh_oc_1: usbhoc1grp { - fsl,pins = < - /* USBH_OC */ - MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 - >; - }; - pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 @@ -650,9 +1033,9 @@ pinctrl_uart2_dte: uart2dtegrp { fsl,pins = < MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 >; }; @@ -667,20 +1050,27 @@ fsl,pins = < /* USBC_DET */ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - /* USBC_DET_EN */ - MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 /* USBC_DET_OVERWRITE */ MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058 + /* USBC_DET_EN */ + MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 >; }; - pinctrl_usbc_id_1: usbc_id-1 { + pinctrl_usbc_id_1: usbcid1grp { fsl,pins = < /* USBC_ID */ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 >; }; + pinctrl_usbh_oc_1: usbhoc1grp { + fsl,pins = < + /* USBH_OC */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 @@ -692,6 +1082,40 @@ >; }; + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 + >; + }; + + /* avoid backfeeding with removed card power */ + pinctrl_usdhc1_sleep: usdhc1sleepgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x3000 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x3000 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x3000 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x3000 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x3000 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x3000 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -730,135 +1154,136 @@ >; }; - pinctrl_weim_sram: weimsramgrp { - fsl,pins = < - MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 - MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 - /* Data */ - MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 - MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 - MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 - MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 - MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 - MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 - MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 - MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 - MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 - /* Address */ - MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 - MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 - MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 - MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 - MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 - MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 - MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 - MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 - MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 - MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 - MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 - MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 - MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 - MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 - MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 - MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 - >; - }; - - pinctrl_weim_rdnwr: weimrdnwr { - fsl,pins = < - MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 - MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 - >; - }; - - pinctrl_weim_npwe: weimnpwe { - fsl,pins = < - MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 - MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 - >; - }; - /* ADDRESS[16:18] [25] used as GPIO */ - pinctrl_weim_gpio_1: weimgpio-1 { + pinctrl_weim_gpio_1: weimgpio1grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 >; }; /* ADDRESS[19:24] used as GPIO */ - pinctrl_weim_gpio_2: weimgpio-2 { + pinctrl_weim_gpio_2: weimgpio2grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 - MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 - MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 - MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 - MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 - MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 >; }; /* DATA[16:31] used as GPIO */ - pinctrl_weim_gpio_3: weimgpio-3 { + pinctrl_weim_gpio_3: weimgpio3grp { fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 - MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 - MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 - MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 - MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 >; }; /* DQM[0:3] used as GPIO */ - pinctrl_weim_gpio_4: weimgpio-4 { + pinctrl_weim_gpio_4: weimgpio4grp { fsl,pins = < MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 - MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 >; }; /* RDY used as GPIO */ - pinctrl_weim_gpio_5: weimgpio-5 { + pinctrl_weim_gpio_5: weimgpio5grp { fsl,pins = < MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 >; }; /* ADDRESS[16] DATA[30] used as GPIO */ - pinctrl_weim_gpio_6: weimgpio-6 { + pinctrl_weim_gpio_6: weimgpio6grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_weim_npwe: weimnpwegrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 + >; + }; + + pinctrl_weim_sram: weimsramgrp { + fsl,pins = < + /* Data */ + MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 + /* Address */ + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + /* Ctrl */ + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + >; + }; + + pinctrl_weim_rdnwr: weimrdnwrgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 + MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 >; }; }; diff --git a/dts/src/arm/imx6qdl-dfi-fs700-m60.dtsi b/dts/src/arm/imx6qdl-dfi-fs700-m60.dtsi index 648f5fcb72..2c1d6f28e6 100644 --- a/dts/src/arm/imx6qdl-dfi-fs700-m60.dtsi +++ b/dts/src/arm/imx6qdl-dfi-fs700-m60.dtsi @@ -35,7 +35,7 @@ pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25vf040b", "jedec,spi-nor"; diff --git a/dts/src/arm/imx6qdl-kontron-samx6i.dtsi b/dts/src/arm/imx6qdl-kontron-samx6i.dtsi index b167b33bd1..095c9143d9 100644 --- a/dts/src/arm/imx6qdl-kontron-samx6i.dtsi +++ b/dts/src/arm/imx6qdl-kontron-samx6i.dtsi @@ -258,7 +258,7 @@ status = "okay"; /* default boot source: workaround #1 for errata ERR006282 */ - smarc_flash: spi-flash@0 { + smarc_flash: flash@0 { compatible = "winbond,w25q16dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/dts/src/arm/imx6qdl-nit6xlite.dtsi b/dts/src/arm/imx6qdl-nit6xlite.dtsi index ac34709e97..0ad4cb4f1e 100644 --- a/dts/src/arm/imx6qdl-nit6xlite.dtsi +++ b/dts/src/arm/imx6qdl-nit6xlite.dtsi @@ -179,7 +179,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/dts/src/arm/imx6qdl-nitrogen6_max.dtsi b/dts/src/arm/imx6qdl-nitrogen6_max.dtsi index c96f4d7e1e..beaa2dcd43 100644 --- a/dts/src/arm/imx6qdl-nitrogen6_max.dtsi +++ b/dts/src/arm/imx6qdl-nitrogen6_max.dtsi @@ -321,7 +321,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi b/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi index 92d09a3ebe..ee7e2371f9 100644 --- a/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi +++ b/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi @@ -252,7 +252,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/dts/src/arm/imx6qdl-nitrogen6x.dtsi b/dts/src/arm/imx6qdl-nitrogen6x.dtsi index 49da30d751..904d5d051d 100644 --- a/dts/src/arm/imx6qdl-nitrogen6x.dtsi +++ b/dts/src/arm/imx6qdl-nitrogen6x.dtsi @@ -237,7 +237,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/dts/src/arm/imx6qdl-phytec-pfla02.dtsi b/dts/src/arm/imx6qdl-phytec-pfla02.dtsi index 1f2ba6f625..768bc0e3a2 100644 --- a/dts/src/arm/imx6qdl-phytec-pfla02.dtsi +++ b/dts/src/arm/imx6qdl-phytec-pfla02.dtsi @@ -47,12 +47,12 @@ pinctrl-0 = <&pinctrl_leds>; compatible = "gpio-leds"; - green { + led_green: green { label = "phyflex:green"; gpios = <&gpio1 30 0>; }; - red { + led_red: red { label = "phyflex:red"; gpios = <&gpio2 31 0>; }; diff --git a/dts/src/arm/imx6qdl-sabreauto.dtsi b/dts/src/arm/imx6qdl-sabreauto.dtsi index 5e58740d40..1368a47620 100644 --- a/dts/src/arm/imx6qdl-sabreauto.dtsi +++ b/dts/src/arm/imx6qdl-sabreauto.dtsi @@ -272,7 +272,7 @@ pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; status = "disabled"; /* pin conflict with WEIM NOR */ - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/dts/src/arm/imx6qdl-sabrelite.dtsi b/dts/src/arm/imx6qdl-sabrelite.dtsi index eb9a0b104f..901b9a761b 100644 --- a/dts/src/arm/imx6qdl-sabrelite.dtsi +++ b/dts/src/arm/imx6qdl-sabrelite.dtsi @@ -313,7 +313,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/dts/src/arm/imx6qdl-sabresd.dtsi b/dts/src/arm/imx6qdl-sabresd.dtsi index 0c0105468a..37482a9023 100644 --- a/dts/src/arm/imx6qdl-sabresd.dtsi +++ b/dts/src/arm/imx6qdl-sabresd.dtsi @@ -197,7 +197,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/dts/src/arm/imx6qdl-sr-som.dtsi b/dts/src/arm/imx6qdl-sr-som.dtsi index f86efd0ccc..ce543e325c 100644 --- a/dts/src/arm/imx6qdl-sr-som.dtsi +++ b/dts/src/arm/imx6qdl-sr-som.dtsi @@ -83,6 +83,16 @@ qca,clk-out-frequency = <125000000>; qca,smarteee-tw-us-1g = <24>; }; + + /* + * ADIN1300 (som rev 1.9 or later) is always at address 1. It + * will be enabled automatically by U-Boot if detected. + */ + ethernet-phy@1 { + reg = <1>; + adi,phy-output-clock = "125mhz-free-running"; + status = "disabled"; + }; }; }; diff --git a/dts/src/arm/imx6qdl-tx6.dtsi b/dts/src/arm/imx6qdl-tx6.dtsi index bcc5bbcce7..f41f86a76e 100644 --- a/dts/src/arm/imx6qdl-tx6.dtsi +++ b/dts/src/arm/imx6qdl-tx6.dtsi @@ -264,11 +264,6 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET_REF>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; phy-reset-post-delay = <10>; diff --git a/dts/src/arm/imx6qdl-udoo.dtsi b/dts/src/arm/imx6qdl-udoo.dtsi index ccfa8e320b..93a8123da2 100644 --- a/dts/src/arm/imx6qdl-udoo.dtsi +++ b/dts/src/arm/imx6qdl-udoo.dtsi @@ -295,7 +295,7 @@ pinctrl-0 = <&pinctrl_usbh>; vbus-supply = <®_usb_h1_vbus>; clocks = <&clks IMX6QDL_CLK_CKO>; - status = "okay"; + status = "disabled"; }; &usbotg { diff --git a/dts/src/arm/imx6qdl-vicut1-12inch.dtsi b/dts/src/arm/imx6qdl-vicut1-12inch.dtsi new file mode 100644 index 0000000000..f505f27045 --- /dev/null +++ b/dts/src/arm/imx6qdl-vicut1-12inch.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 Protonic Holland + */ + +/ { + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031RNX PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "ETH_MDIO", "", + "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", + "HITCH_IN_OUT", + "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", + "ISB_LED"; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", + "RGMII_TD3", + "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", + "RGMII_RD2", "RGMII_RD3", "", ""; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 + >; + }; + + pinctrl_gpiokeys: gpiokeygrp { + fsl,pins = < + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + >; + }; +}; diff --git a/dts/src/arm/imx6qdl-vicut1.dtsi b/dts/src/arm/imx6qdl-vicut1.dtsi index 1ac7e13249..a1676b5d29 100644 --- a/dts/src/arm/imx6qdl-vicut1.dtsi +++ b/dts/src/arm/imx6qdl-vicut1.dtsi @@ -16,18 +16,27 @@ stdout-path = &uart4; }; - backlight: backlight { + backlight_lcd: backlight { compatible = "pwm-backlight"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_backlight>; pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 16 64 255>; num-interpolated-steps = <16>; - default-brightness-level = <1>; + default-brightness-level = <48>; power-supply = <®_3v3>; enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; }; + backlight_led: backlight_led { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000 0>; + brightness-levels = <0 16 64 255>; + num-interpolated-steps = <16>; + default-brightness-level = <48>; + power-supply = <®_3v3>; + }; + connector { compatible = "composite-video-connector"; label = "Composite0"; @@ -61,54 +70,37 @@ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; }; - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - power { - label = "Power Button"; - gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - linux,code = ; - wakeup-source; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_leds>; led-0 { - label = "LED_DI0_DEBUG_0"; + label = "debug0"; function = LED_FUNCTION_HEARTBEAT; - gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; led-1 { - label = "LED_DI0_DEBUG_1"; + label = "debug1"; function = LED_FUNCTION_DISK; - gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "disk-activity"; }; led-2 { - label = "POWER_LED"; + label = "power_led"; function = LED_FUNCTION_POWER; gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - }; - - panel { - compatible = "kyo,tcg121xglp"; - backlight = <&backlight>; - power-supply = <®_3v3>; - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; + led-3 { + label = "isb_led"; + function = LED_FUNCTION_POWER; + gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; @@ -135,18 +127,6 @@ enable-active-high; }; - reg_wifi: regulator-wifi { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wifi_npd>; - regulator-name = "wifi"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; - enable-active-high; - startup-delay-us = <70000>; - }; - sound { compatible = "simple-audio-card"; simple-audio-card,name = "prti6q-sgtl5000"; @@ -173,6 +153,14 @@ frame-master; }; }; + + thermal-zones { + chassis-thermal { + polling-delay = <20000>; + polling-delay-passive = <0>; + thermal-sensors = <&tsens0>; + }; + }; }; &audmux { @@ -232,47 +220,13 @@ }; }; -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii-id"; - phy-handle = <&rgmii_phy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - /* Microchip KSZ9031RNX PHY */ - rgmii_phy: ethernet-phy@0 { - reg = <0>; - interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <300>; - }; - }; -}; - -&gpio1 { - gpio-line-names = - "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", - "CAM2_MIRROR", "", "", "SMBALERT", - "DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3", - "SDIO_D2", "SDIO_D1", "SDIO_D0", - "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", - "SD1_DATA3", "", "", - "", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "", - "WL_IRQ", "ETH_MDC"; -}; - &gpio2 { gpio-line-names = - "count0", "count1", "count2", "", "", "", "", "", - "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", - "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", - "", "", "", "", "", "", "", "ON_SWITCH", - "POWER_LED", "", "ECSPI2_SS0", "", "", "", "", ""; + "YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "", + "", "LED_PWM", "", "", "", + "", "", "", + "", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH", + "POWER_LED", "", "", "", "", "", "", ""; }; &gpio3 { @@ -281,37 +235,8 @@ "", "", "", "", "", "", "", "", "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", "CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ", - "", "", "", "", "", "", "", ""; -}; - -&gpio4 { - gpio-line-names = - "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", - "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", - "CAN2_SR", "CAN2_TX", "CAN2_RX", - "LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "", "", "", - "", "", "", "", "BL_EN", "BL_PWM", "", ""; -}; - -&gpio5 { - gpio-line-names = - "", "", "", "", "", "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_W_DIS", - "PCIE_RESET", "", "", "", "", "", "", "", - "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", - "I2S_BITCLK", "I2S_DOUT", - "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", - "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; -}; - -&gpio6 { - gpio-line-names = - "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", - "ITU656_D6", "ITU656_D7", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", - "RGMII_TD3", - "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", - "RGMII_RD2", "RGMII_RD3", "", ""; + "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0", + "YACO_RESET"; }; &gpio7 { @@ -406,9 +331,10 @@ reg = <0x51>; }; - temperature-sensor@70 { + tsens0: temperature-sensor@70 { compatible = "ti,tmp103"; reg = <0x70>; + #thermal-sensor-cells = <0>; }; }; @@ -438,13 +364,15 @@ }; }; -&pcie { +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; -&pwm1 { +&pwm3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; + pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; }; @@ -460,12 +388,6 @@ status = "okay"; }; -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; @@ -513,26 +435,6 @@ status = "okay"; }; -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - vmmc-supply = <®_wifi>; - non-removable; - cap-power-off-card; - keep-power-in-suspend; - no-1-8-v; - no-mmc; - no-sd; - status = "okay"; - - wifi { - compatible = "ti,wl1271"; - interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>; - ref-clock-frequency = "38400000"; - tcxo-clock-frequency = "19200000"; - }; -}; - &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -613,29 +515,6 @@ >; }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 - /* Phy reset */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 - >; - }; - pinctrl_hog: hoggrp { fsl,pins = < /* ITU656_nRESET */ @@ -646,8 +525,6 @@ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* CAM_nDETECT */ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - /* nON_SWITCH */ - MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 /* ISB_IN1 */ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 /* ISB_nIN2 */ @@ -669,27 +546,11 @@ /* ITU656_nPDN */ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 - /* HW revision detect */ - /* REV_ID0 */ - MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 - /* REV_ID1 */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 - /* REV_ID2 */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 - /* REV_ID3 */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 - /* REV_ID4 */ - MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 - /* New in HW revision 1 */ /* ON1_FB */ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 /* DIP1_FB */ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 - - /* New in UT2: FIXME: ISB PWM should start off, PD */ - /* ISB_LED_PWM */ - MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x130b0 >; }; @@ -729,6 +590,8 @@ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 /* POWER_LED */ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 + /* ISB_LED */ + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 >; }; @@ -738,20 +601,17 @@ >; }; - /* YaCO AUX Uart */ - pinctrl_uart1: uart1grp { + pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 >; }; - pinctrl_uart2: uart2grp { + /* YaCO AUX Uart */ + pinctrl_uart1: uart1grp { fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; @@ -797,19 +657,6 @@ >; }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 - /* WL12xx IRQ */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880 - >; - }; - pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 @@ -825,10 +672,4 @@ MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 >; }; - - pinctrl_wifi_npd: wifinpdgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0 - >; - }; }; diff --git a/dts/src/arm/imx6qp-vicutp.dts b/dts/src/arm/imx6qp-vicutp.dts index 7bad7ca6b1..49ff145fff 100644 --- a/dts/src/arm/imx6qp-vicutp.dts +++ b/dts/src/arm/imx6qp-vicutp.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx6qp.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1P Board"; diff --git a/dts/src/arm/imx6sl-evk.dts b/dts/src/arm/imx6sl-evk.dts index 25f6f2fb15..f16c830f1e 100644 --- a/dts/src/arm/imx6sl-evk.dts +++ b/dts/src/arm/imx6sl-evk.dts @@ -137,7 +137,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/dts/src/arm/imx6sl.dtsi b/dts/src/arm/imx6sl.dtsi index c7d907c5c3..06a515121d 100644 --- a/dts/src/arm/imx6sl.dtsi +++ b/dts/src/arm/imx6sl.dtsi @@ -50,7 +50,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0x0>; diff --git a/dts/src/arm/imx6sx-nitrogen6sx.dts b/dts/src/arm/imx6sx-nitrogen6sx.dts index 66af78e83b..a2c79bcf9a 100644 --- a/dts/src/arm/imx6sx-nitrogen6sx.dts +++ b/dts/src/arm/imx6sx-nitrogen6sx.dts @@ -107,7 +107,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/dts/src/arm/imx6sx-sdb-reva.dts b/dts/src/arm/imx6sx-sdb-reva.dts index dce5dcf96c..7dda42553f 100644 --- a/dts/src/arm/imx6sx-sdb-reva.dts +++ b/dts/src/arm/imx6sx-sdb-reva.dts @@ -123,7 +123,7 @@ pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; - flash0: s25fl128s@0 { + flash0: flash@0 { reg = <0>; #address-cells = <1>; #size-cells = <1>; @@ -133,7 +133,7 @@ spi-tx-bus-width = <4>; }; - flash1: s25fl128s@2 { + flash1: flash@2 { reg = <2>; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/imx6sx-sdb.dts b/dts/src/arm/imx6sx-sdb.dts index 99f4cf777a..969cfe920d 100644 --- a/dts/src/arm/imx6sx-sdb.dts +++ b/dts/src/arm/imx6sx-sdb.dts @@ -108,7 +108,7 @@ pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; - flash0: n25q256a@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; @@ -118,7 +118,7 @@ reg = <0>; }; - flash1: n25q256a@2 { + flash1: flash@2 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; diff --git a/dts/src/arm/imx6ul-14x14-evk.dtsi b/dts/src/arm/imx6ul-14x14-evk.dtsi index a3fde3316c..1a18c41ce3 100644 --- a/dts/src/arm/imx6ul-14x14-evk.dtsi +++ b/dts/src/arm/imx6ul-14x14-evk.dtsi @@ -286,7 +286,7 @@ pinctrl-0 = <&pinctrl_qspi>; status = "okay"; - flash0: n25q256a@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; diff --git a/dts/src/arm/imx6ul-kontron-n6310-som.dtsi b/dts/src/arm/imx6ul-kontron-n6310-som.dtsi index 47d3ce5d25..acd936540d 100644 --- a/dts/src/arm/imx6ul-kontron-n6310-som.dtsi +++ b/dts/src/arm/imx6ul-kontron-n6310-som.dtsi @@ -19,7 +19,7 @@ }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/dts/src/arm/imx6ul-kontron-n6311-som.dtsi b/dts/src/arm/imx6ul-kontron-n6311-som.dtsi index a095a7654a..29ed38dce5 100644 --- a/dts/src/arm/imx6ul-kontron-n6311-som.dtsi +++ b/dts/src/arm/imx6ul-kontron-n6311-som.dtsi @@ -18,7 +18,7 @@ }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/dts/src/arm/imx6ul-kontron-n6x1x-s.dtsi b/dts/src/arm/imx6ul-kontron-n6x1x-s.dtsi index 770f59b231..a6cf0f21c6 100644 --- a/dts/src/arm/imx6ul-kontron-n6x1x-s.dtsi +++ b/dts/src/arm/imx6ul-kontron-n6x1x-s.dtsi @@ -178,7 +178,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/dts/src/arm/imx6ul-kontron-n6x1x-som-common.dtsi b/dts/src/arm/imx6ul-kontron-n6x1x-som-common.dtsi index 2a449a3c1a..09a83dbdf6 100644 --- a/dts/src/arm/imx6ul-kontron-n6x1x-som-common.dtsi +++ b/dts/src/arm/imx6ul-kontron-n6x1x-som-common.dtsi @@ -19,7 +19,7 @@ pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/dts/src/arm/imx6ul-phytec-segin-peb-av-02.dtsi b/dts/src/arm/imx6ul-phytec-segin-peb-av-02.dtsi index 205e4d4627..ec042648bd 100644 --- a/dts/src/arm/imx6ul-phytec-segin-peb-av-02.dtsi +++ b/dts/src/arm/imx6ul-phytec-segin-peb-av-02.dtsi @@ -11,7 +11,7 @@ brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <5>; power-supply = <®_backlight_en>; - pwms = <&pwm3 0 5000000>; + pwms = <&pwm3 0 5000000 0>; status = "disabled"; }; @@ -91,7 +91,6 @@ }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "disabled"; diff --git a/dts/src/arm/imx6ul-tqma6ul-common.dtsi b/dts/src/arm/imx6ul-tqma6ul-common.dtsi new file mode 100644 index 0000000000..eca94ed645 --- /dev/null +++ b/dts/src/arm/imx6ul-tqma6ul-common.dtsi @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +/* + * Common for + * - TQMa6ULx + * - TQMa6ULxL + * - TQMa6ULLx + * - TQMa6ULLxL + */ + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_recovery>; + scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pfuze3000: pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + reg_sw1a: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-ramp-delay = <6250>; + /* not used */ + }; + + reg_sw1b_core: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + reg_sw2: sw2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + reg_sw3_ddr: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_swbst: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + /* not used */ + }; + + reg_snvs_3v0: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + reg_vccsd: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + }; + + reg_v33_3v3: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vldo1_3v3: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + /* not used */ + }; + + reg_vldo2: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + /* not used */ + }; + + reg_vldo3: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + /* not used */ + }; + + reg_vldo4: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + + jc42_1a: eeprom-temperature-sensor@1a { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1a>; + }; + + m24c64_50: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + m24c02_52: eeprom@52 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + read-only; + }; + + rtc0: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + + /* + * PMIC & temperature sensor IRQ + * Both do currently not use IRQ + * potentially dangerous if used on baseboard + */ + pmic-int-hog { + gpio-hog; + gpios = <24 0>; + input; + }; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <33000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <0>; + }; +}; + +/* eMMC */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz" , "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + + bus-width = <8>; + disable-wp; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001b8b0 + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c4_recovery: i2c4recoverygrp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x4001b8b0 + MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x4001b8b0 + >; + }; + + pinctrl_pmic: pmic { + fsl,pins = < + /* PMIC irq */ + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1b099 + >; + }; +}; diff --git a/dts/src/arm/imx6ul-tqma6ul1-mba6ulx.dts b/dts/src/arm/imx6ul-tqma6ul1-mba6ulx.dts new file mode 100644 index 0000000000..f2a5f17f31 --- /dev/null +++ b/dts/src/arm/imx6ul-tqma6ul1-mba6ulx.dts @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +/dts-v1/; + +#include "imx6ul-tqma6ul1.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board"; + compatible = "tq,imx6ul-tqma6ul1-mba6ulx", "tq,imx6ul-tqma6ul1", "fsl,imx6ul"; +}; + +/* + * Note: can2 and fec2 are enabled on mba6ulx level (for i.MX6ULG2 usage) + * and need to be disabled here again + */ +&can2 { + status = "disabled"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_mdc>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <0>; + }; + }; +}; + +&fec2 { + /delete-property/ phy-handle; + /delete-node/ mdio; +}; + +&iomuxc { + pinctrl_enet1_mdc: enet1mdcgrp { + fsl,pins = < + /* mdio */ + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; +}; diff --git a/dts/src/arm/imx6ul-tqma6ul1.dtsi b/dts/src/arm/imx6ul-tqma6ul1.dtsi new file mode 100644 index 0000000000..24192d012e --- /dev/null +++ b/dts/src/arm/imx6ul-tqma6ul1.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +#include "imx6ul-tqma6ul2.dtsi" + +/ { + model = "TQ-Systems TQMa6UL1 SoM"; + compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul"; +}; + +/* + * There are no module specific differences compared to TQMa6UL2, + * only external interfaces differ + */ + +/* + * Devices not available on i.MX6ULG1 and should not be enabled on + * mainboard level (again) + */ +&can2 { + status = "disabled"; +}; + +&csi { + status = "disabled"; +}; + +&fec2 { + status = "disabled"; +}; + +&lcdif { + status = "disabled"; +}; diff --git a/dts/src/arm/imx6ul-tqma6ul2-mba6ulx.dts b/dts/src/arm/imx6ul-tqma6ul2-mba6ulx.dts new file mode 100644 index 0000000000..0757df2b8f --- /dev/null +++ b/dts/src/arm/imx6ul-tqma6ul2-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +/dts-v1/; + +#include "imx6ul-tqma6ul2.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ-Systems TQMa6ULx SoM on MBa6ULx board"; + compatible = "tq,imx6ul-tqma6ul2-mba6ulx", "tq,imx6ul-tqma6ul2", "fsl,imx6ul"; +}; diff --git a/dts/src/arm/imx6ul-tqma6ul2.dtsi b/dts/src/arm/imx6ul-tqma6ul2.dtsi new file mode 100644 index 0000000000..e2e95dd922 --- /dev/null +++ b/dts/src/arm/imx6ul-tqma6ul2.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +#include "imx6ul.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulx-common.dtsi" + +/ { + model = "TQ-Systems TQMa6UL2 SoM"; + compatible = "tq,imx6ul-tqma6ul2", "fsl,imx6ul"; +}; + +&usdhc2 { + fsl,tuning-step = <6>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017051 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017051 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017051 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017051 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017051 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017051 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017051 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017051 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017051 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017051 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170e1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170e1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170e1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170e1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170e1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170e1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170e1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170e1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170e1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170e1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/dts/src/arm/imx6ul-tqma6ul2l-mba6ulx.dts b/dts/src/arm/imx6ul-tqma6ul2l-mba6ulx.dts new file mode 100644 index 0000000000..9d9b6b744a --- /dev/null +++ b/dts/src/arm/imx6ul-tqma6ul2l-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ Systems GmbH + * Author: Markus Niebel + */ + +/dts-v1/; + +#include "imx6ul-tqma6ul2l.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ Systems TQMa6UL2L SoM on MBa6ULx board"; + compatible = "tq,imx6ul-tqma6ul2l-mba6ulx", "tq,imx6ul-tqma6ul2l", "fsl,imx6ul"; +}; diff --git a/dts/src/arm/imx6ul-tqma6ul2l.dtsi b/dts/src/arm/imx6ul-tqma6ul2l.dtsi new file mode 100644 index 0000000000..caf2c5d03f --- /dev/null +++ b/dts/src/arm/imx6ul-tqma6ul2l.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +#include "imx6ul.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulxl-common.dtsi" + +/ { + model = "TQ-Systems TQMa6UL2L SoM"; + compatible = "tq,imx6ul-tqma6ul2l", "fsl,imx6ul"; +}; + +&usdhc2 { + fsl,tuning-step= <6>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017051 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017051 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017051 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017051 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017051 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017051 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017051 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017051 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017051 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017051 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170e1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/dts/src/arm/imx6ul-tqma6ulx-common.dtsi b/dts/src/arm/imx6ul-tqma6ulx-common.dtsi new file mode 100644 index 0000000000..5afb9046c2 --- /dev/null +++ b/dts/src/arm/imx6ul-tqma6ulx-common.dtsi @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +/* + * Common for + * - TQMa6ULx + * - TQMa6ULLx + */ + +&m24c64_50 { + vcc-supply = <®_sw2>; +}; + +&m24c02_52 { + vcc-supply = <®_sw2>; +}; + +®_sw2 { + regulator-boot-on; + regulator-always-on; +}; + +/* eMMC */ +&usdhc2 { + vmmc-supply = <®_sw2>; + vqmmc-supply = <®_vldo4>; +}; + +&iomuxc { + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70b9 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70b9 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70b9 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70b9 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70b9 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; +}; diff --git a/dts/src/arm/imx6ul-tqma6ulxl-common.dtsi b/dts/src/arm/imx6ul-tqma6ulxl-common.dtsi new file mode 100644 index 0000000000..ba84a4f70e --- /dev/null +++ b/dts/src/arm/imx6ul-tqma6ulxl-common.dtsi @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +/* + * Common for + * - TQMa6ULxL + * - TQMa6ULLxL + */ + +/ { + reg_vin: reg-vin { + compatible = "regulator-fixed"; + regulator-name = "VIN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&m24c64_50 { + vcc-supply = <®_vin>; +}; + +&m24c02_52 { + vcc-supply = <®_vin>; +}; + +/* eMMC */ +&usdhc2 { + vmmc-supply = <®_vin>; + vqmmc-supply = <®_vldo4>; +}; + +&iomuxc { + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a9 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a9 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a9 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a9 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a9 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; +}; diff --git a/dts/src/arm/imx6ull-colibri-aster.dts b/dts/src/arm/imx6ull-colibri-aster.dts new file mode 100644 index 0000000000..d3f2fb7c6c --- /dev/null +++ b/dts/src/arm/imx6ull-colibri-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-nonwifi.dtsi" +#include "imx6ull-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Aster"; + compatible = "toradex,colibri-imx6ull-aster", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/dts/src/arm/imx6ull-colibri-aster.dtsi b/dts/src/arm/imx6ull-colibri-aster.dtsi new file mode 100644 index 0000000000..c9133ba2d7 --- /dev/null +++ b/dts/src/arm/imx6ull-colibri-aster.dtsi @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017-2022 Toradex + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + linux,code = ; + debounce-interval = <10>; + wakeup-source; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&adc1 { + status = "okay"; +}; + +&ecspi1 { + status = "okay"; + + num-cs = <2>; + cs-gpios = < + &gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */ + &gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */ + >; +}; + +/* + * Following SODIMM Pins should not be accessed as GPIO on Aster board: + * 134 - AIN5_SCL (no connection) + * 127 - Voltage Level Translator OE# signal (IC11 and IC12) + * + * To configure GPIO to LED5, please disable FEC2 and uncomment the following: + * &iomuxc { + * pinctrl-names = "default"; + * pinctrl-0 = < + * &pinctrl_gpio1 + * &pinctrl_gpio2 + * &pinctrl_gpio3 + * &pinctrl_gpio4 + * &pinctrl_gpio6 - for non-WiFi modules only + * &pinctrl_gpio7 + * &pinctrl_gpio_aster + * >; + * + * pinctrl_gpio_aster: gpio-aster { + * fsl,pins = < + * MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x1b0b0 + * >; + * }; + * }; + */ + +&i2c1 { + status = "okay"; + + m41t0m6: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* PWM */ +&pwm4 { + status = "okay"; +}; + +/* PWM */ +&pwm5 { + status = "okay"; +}; + +/* PWM */ +&pwm6 { + status = "okay"; +}; + +/* PWM */ +&pwm7 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usdhc1 { + vmmc-supply = <®_3v3>; + status = "okay"; +}; diff --git a/dts/src/arm/imx6ull-colibri-emmc-aster.dts b/dts/src/arm/imx6ull-colibri-emmc-aster.dts new file mode 100644 index 0000000000..919c0464d6 --- /dev/null +++ b/dts/src/arm/imx6ull-colibri-emmc-aster.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Aster"; + compatible = "toradex,colibri-imx6ull-emmc-aster", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/dts/src/arm/imx6ull-colibri-emmc-iris-v2.dts b/dts/src/arm/imx6ull-colibri-emmc-iris-v2.dts new file mode 100644 index 0000000000..b9060c2f79 --- /dev/null +++ b/dts/src/arm/imx6ull-colibri-emmc-iris-v2.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1G (eMMC) on Colibri Iris V2"; + compatible = "toradex,colibri-imx6ull-iris-v2", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/dts/src/arm/imx6ull-colibri-emmc-iris.dts b/dts/src/arm/imx6ull-colibri-emmc-iris.dts new file mode 100644 index 0000000000..0ab71f2f5d --- /dev/null +++ b/dts/src/arm/imx6ull-colibri-emmc-iris.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Iris"; + compatible = "toradex,colibri-imx6ull-emmc-iris", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/dts/src/arm/imx6ull-colibri-emmc-nonwifi.dtsi b/dts/src/arm/imx6ull-colibri-emmc-nonwifi.dtsi index a099abfdfa..ea238525d5 100644 --- a/dts/src/arm/imx6ull-colibri-emmc-nonwifi.dtsi +++ b/dts/src/arm/imx6ull-colibri-emmc-nonwifi.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2021 Toradex + * Copyright 2022 Toradex */ #include "imx6ull-colibri.dtsi" @@ -8,7 +8,7 @@ / { aliases { mmc0 = &usdhc2; /* eMMC */ - mmc1 = &usdhc1; /* MMC 4bit slot */ + mmc1 = &usdhc1; /* MMC 4-bit slot */ }; memory@80000000 { @@ -154,6 +154,7 @@ "SODIMM_127"; }; +/* NAND */ &gpmi { status = "disabled"; }; @@ -170,6 +171,7 @@ pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>; }; +/* eMMC */ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2emmc>; diff --git a/dts/src/arm/imx6ull-colibri-eval-v3.dts b/dts/src/arm/imx6ull-colibri-eval-v3.dts index 08669a1834..9bf7111d7b 100644 --- a/dts/src/arm/imx6ull-colibri-eval-v3.dts +++ b/dts/src/arm/imx6ull-colibri-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ /dts-v1/; @@ -9,6 +9,6 @@ #include "imx6ull-colibri-eval-v3.dtsi" / { - model = "Toradex Colibri iMX6ULL 256MB on Colibri Evaluation Board V3"; + model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull"; }; diff --git a/dts/src/arm/imx6ull-colibri-eval-v3.dtsi b/dts/src/arm/imx6ull-colibri-eval-v3.dtsi index a78849fd2a..e29907428c 100644 --- a/dts/src/arm/imx6ull-colibri-eval-v3.dtsi +++ b/dts/src/arm/imx6ull-colibri-eval-v3.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017 Toradex AG + * Copyright 2017-2022 Toradex */ / { @@ -8,20 +8,6 @@ stdout-path = "serial0:115200n8"; }; - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_snvs_gpiokeys>; - - power { - label = "Wake-Up"; - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - linux,code = ; - debounce-interval = <10>; - wakeup-source; - }; - }; - /* fixed crystal dedicated to mcp2515 */ clk16m: clk16m { compatible = "fixed-clock"; @@ -29,18 +15,6 @@ clock-frequency = <16000000>; }; - panel: panel { - compatible = "edt,et057090dhu"; - backlight = <&bl>; - power-supply = <®_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; - }; - }; - reg_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3.3V"; @@ -71,14 +45,6 @@ status = "okay"; }; -&bl { - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - power-supply = <®_3v3>; - pwms = <&pwm4 0 5000000 1>; - status = "okay"; -}; - &ecspi1 { status = "okay"; @@ -107,16 +73,6 @@ }; }; -&lcdif { - status = "okay"; - - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; - /* PWM */ &pwm4 { status = "okay"; @@ -150,6 +106,7 @@ }; &usbotg1 { + vbus-supply = <®_usbh_vbus>; status = "okay"; }; @@ -159,20 +116,6 @@ }; &usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; - pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>; - cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - disable-wp; - wakeup-source; - keep-power-in-suspend; vmmc-supply = <®_3v3>; - vqmmc-supply = <®_sd1_vmmc>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; status = "okay"; }; diff --git a/dts/src/arm/imx6ull-colibri-iris-v2.dts b/dts/src/arm/imx6ull-colibri-iris-v2.dts new file mode 100644 index 0000000000..afc1e01197 --- /dev/null +++ b/dts/src/arm/imx6ull-colibri-iris-v2.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-nonwifi.dtsi" +#include "imx6ull-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 256M/512B on Colibri Iris V2"; + compatible = "toradex,colibri-imx6ull-iris-v2", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&gpio1 { + /* This turns the LVDS transceiver on */ + lvds-power-on { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; +}; + +&gpio5 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; diff --git a/dts/src/arm/imx6ull-colibri-iris-v2.dtsi b/dts/src/arm/imx6ull-colibri-iris-v2.dtsi new file mode 100644 index 0000000000..93649cad0c --- /dev/null +++ b/dts/src/arm/imx6ull-colibri-iris-v2.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +#include "imx6ull-colibri-iris.dtsi" + +/ { + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + regulator-name = "3v3_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + }; +}; + + +&usdhc1 { + cap-power-off-card; + vmmc-supply = <®_3v3_vmmc>; + /delete-property/ keep-power-in-suspend; + /delete-property/ no-1-8-v; + status = "okay"; +}; diff --git a/dts/src/arm/imx6ull-colibri-iris.dts b/dts/src/arm/imx6ull-colibri-iris.dts new file mode 100644 index 0000000000..4fb97b0fe3 --- /dev/null +++ b/dts/src/arm/imx6ull-colibri-iris.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-nonwifi.dtsi" +#include "imx6ull-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Iris"; + compatible = "toradex,colibri-imx6ull-iris", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/dts/src/arm/imx6ull-colibri-iris.dtsi b/dts/src/arm/imx6ull-colibri-iris.dtsi new file mode 100644 index 0000000000..7f3b37baba --- /dev/null +++ b/dts/src/arm/imx6ull-colibri-iris.dtsi @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + linux,code = ; + debounce-interval = <10>; + wakeup-source; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&adc1 { + status = "okay"; +}; + +&gpio1 { + /* + * uart25_tx_on turns the UART transceiver on. If one wants to turn the + * transceiver off, that property has to be deleted and the gpio handled + * in userspace. + * The same applies to uart1_tx_on. + */ + uart25_tx_on { + gpio-hog; + gpios = <15 0>; + output-high; + }; +}; + +&gpio2 { + uart1_tx_on { + gpio-hog; + gpios = <7 0>; + output-high; + }; +}; + +&i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + m41t0m6: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* PWM */ +&pwm4 { + status = "okay"; +}; + +/* PWM */ +&pwm5 { + status = "okay"; +}; + +/* PWM */ +&pwm6 { + status = "okay"; +}; + +/* PWM */ +&pwm7 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usdhc1 { + vmmc-supply = <®_3v3>; + status = "okay"; +}; diff --git a/dts/src/arm/imx6ull-colibri-nonwifi.dtsi b/dts/src/arm/imx6ull-colibri-nonwifi.dtsi index 95a11b8bcb..88901db255 100644 --- a/dts/src/arm/imx6ull-colibri-nonwifi.dtsi +++ b/dts/src/arm/imx6ull-colibri-nonwifi.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ #include "imx6ull-colibri.dtsi" @@ -12,13 +12,150 @@ }; }; +&gpio1 { + gpio-line-names = "SODIMM_8", + "SODIMM_6", + "SODIMM_129", + "SODIMM_89", + "SODIMM_19", + "SODIMM_21", + "UNUSABLE_SODIMM_180", + "UNUSABLE_SODIMM_184", + "SODIMM_4", + "SODIMM_2", + "SODIMM_106", + "SODIMM_71", + "SODIMM_23", + "SODIMM_31", + "SODIMM_99", + "SODIMM_102", + "SODIMM_33", + "SODIMM_35", + "SODIMM_25", + "SODIMM_27", + "SODIMM_36", + "SODIMM_38", + "SODIMM_32", + "SODIMM_34", + "SODIMM_135", + "SODIMM_77", + "SODIMM_100", + "SODIMM_186", + "SODIMM_196", + "SODIMM_194"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_55", + "SODIMM_63", + "SODIMM_178", + "SODIMM_188", + "SODIMM_73", + "SODIMM_30", + "SODIMM_67", + "SODIMM_104", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_190", + "SODIMM_47", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_29", + "SODIMM_37", + "SODIMM_88", + "SODIMM_86", + "SODIMM_92", + "SODIMM_90"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_59", + "", + "", + "SODIMM_133", + "", + "SODIMM_28", + "SODIMM_75", + "SODIMM_96", + "SODIMM_81", + "SODIMM_94", + "SODIMM_101", + "SODIMM_103", + "SODIMM_79", + "SODIMM_97", + "SODIMM_69", + "SODIMM_98", + "SODIMM_85", + "SODIMM_65"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_43", + "SODIMM_45", + "SODIMM_137", + "SODIMM_95", + "SODIMM_107", + "SODIMM_131", + "SODIMM_93", + "", + "SODIMM_138", + "", + "SODIMM_105", + "SODIMM_127"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>; + &pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7>; }; &iomuxc_snvs { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2 &pinctrl_snvs_gpio3>; + pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>; }; diff --git a/dts/src/arm/imx6ull-colibri-wifi-aster.dts b/dts/src/arm/imx6ull-colibri-wifi-aster.dts new file mode 100644 index 0000000000..b4f65e8c58 --- /dev/null +++ b/dts/src/arm/imx6ull-colibri-wifi-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-wifi.dtsi" +#include "imx6ull-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 512MB on Colibri Aster"; + compatible = "toradex,colibri-imx6ull-wifi-aster", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/dts/src/arm/imx6ull-colibri-wifi-eval-v3.dts b/dts/src/arm/imx6ull-colibri-wifi-eval-v3.dts index df72ce1ae2..1d64d1a5d8 100644 --- a/dts/src/arm/imx6ull-colibri-wifi-eval-v3.dts +++ b/dts/src/arm/imx6ull-colibri-wifi-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ /dts-v1/; diff --git a/dts/src/arm/imx6ull-colibri-wifi-iris-v2.dts b/dts/src/arm/imx6ull-colibri-wifi-iris-v2.dts new file mode 100644 index 0000000000..ce02f8a9dd --- /dev/null +++ b/dts/src/arm/imx6ull-colibri-wifi-iris-v2.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-wifi.dtsi" +#include "imx6ull-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris V2"; + compatible = "toradex,colibri-imx6ull-wifi-iris-v2", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&gpio1 { + /* This turns the LVDS transceiver on */ + lvds-power-on { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; +}; + +&gpio5 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; diff --git a/dts/src/arm/imx6ull-colibri-wifi-iris.dts b/dts/src/arm/imx6ull-colibri-wifi-iris.dts new file mode 100644 index 0000000000..5ac1aa298c --- /dev/null +++ b/dts/src/arm/imx6ull-colibri-wifi-iris.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-wifi.dtsi" +#include "imx6ull-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris"; + compatible = "toradex,colibri-imx6ull-wifi-iris", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/dts/src/arm/imx6ull-colibri-wifi.dtsi b/dts/src/arm/imx6ull-colibri-wifi.dtsi index 9f1e38282b..db59ee6b1c 100644 --- a/dts/src/arm/imx6ull-colibri-wifi.dtsi +++ b/dts/src/arm/imx6ull-colibri-wifi.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ #include "imx6ull-colibri.dtsi" @@ -23,16 +23,152 @@ clock-frequency = <792000000>; }; +&gpio1 { + gpio-line-names = "SODIMM_8", + "SODIMM_6", + "SODIMM_129", + "", + "SODIMM_19", + "SODIMM_21", + "UNUSABLE_SODIMM_180", + "UNUSABLE_SODIMM_184", + "SODIMM_4", + "SODIMM_2", + "SODIMM_106", + "SODIMM_71", + "SODIMM_23", + "SODIMM_31", + "SODIMM_99", + "SODIMM_102", + "SODIMM_33", + "SODIMM_35", + "SODIMM_25", + "SODIMM_27", + "SODIMM_36", + "SODIMM_38", + "SODIMM_32", + "SODIMM_34", + "SODIMM_135", + "SODIMM_77", + "SODIMM_100", + "SODIMM_186", + "SODIMM_196", + "SODIMM_194"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_55", + "SODIMM_63", + "SODIMM_178", + "SODIMM_188", + "SODIMM_73", + "SODIMM_30", + "SODIMM_67", + "SODIMM_104", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_190", + "SODIMM_47", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_29", + "SODIMM_37", + "SODIMM_88", + "SODIMM_86", + "SODIMM_92", + "SODIMM_90"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_59", + "", + "", + "SODIMM_133", + "", + "SODIMM_28", + "SODIMM_75", + "SODIMM_96", + "", + "", + "", + "", + "", + "", + "SODIMM_69", + "SODIMM_98", + "SODIMM_85", + "SODIMM_65"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_43", + "SODIMM_45", + "SODIMM_137", + "SODIMM_95", + "SODIMM_107", + "SODIMM_131", + "", + "", + "", + "", + "SODIMM_105"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>; + &pinctrl_gpio4 &pinctrl_gpio7>; }; &iomuxc_snvs { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2>; + pinctrl-0 = <&pinctrl_snvs_gpio1>; }; &usdhc2 { diff --git a/dts/src/arm/imx6ull-colibri.dtsi b/dts/src/arm/imx6ull-colibri.dtsi index 951a2a6c5a..15621e03fa 100644 --- a/dts/src/arm/imx6ull-colibri.dtsi +++ b/dts/src/arm/imx6ull-colibri.dtsi @@ -1,22 +1,54 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018-2021 Toradex + * Copyright 2018-2022 Toradex */ #include "imx6ull.dtsi" / { + /* Ethernet aliases to ensure correct MAC addresses */ aliases { ethernet0 = &fec2; ethernet1 = &fec1; }; - bl: backlight { + backlight: backlight { compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; - enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - status = "disabled"; + power-supply = <®_3v3>; + pwms = <&pwm4 0 5000000 1>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + wakeup { + debounce-interval = <10>; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ + label = "Wake-Up"; + linux,code = ; + wakeup-source; + }; + }; + + panel_dpi: panel-dpi { + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + power-supply = <®_3v3>; + status = "okay"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; }; reg_module_3v3: regulator-module-3v3 { @@ -35,7 +67,7 @@ regulator-max-microvolt = <3300000>; }; - reg_sd1_vmmc: regulator-sd1-vmmc { + reg_sd1_vqmmc: regulator-sd1-vqmmc { compatible = "regulator-gpio"; gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; @@ -47,11 +79,25 @@ states = <1800000 0x1 3300000 0x0>; vin-supply = <®_module_3v3>; }; + + reg_eth_phy: regulator-eth-phy { + compatible = "regulator-fixed-clock"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "+V3.3_ETH"; + regulator-type = "voltage"; + vin-supply = <®_module_3v3>; + clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>; + startup-delay-us = <150000>; + }; }; &adc1 { num-channels = <10>; vref-supply = <®_module_3v3_avdd>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; }; &can1 { @@ -73,12 +119,14 @@ pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; }; +/* Ethernet */ &fec2 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_enet2>; pinctrl-1 = <&pinctrl_enet2_sleep>; phy-mode = "rmii"; phy-handle = <ðphy1>; + phy-supply = <®_eth_phy>; status = "okay"; mdio { @@ -93,9 +141,11 @@ }; }; +/* NAND */ &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; + fsl,use-minimum-ecc; nand-on-flash-bbt; nand-ecc-mode = "hw"; nand-ecc-strength = <8>; @@ -103,15 +153,35 @@ status = "okay"; }; +/* I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */ &i2c1 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + /* Atmel maxtouch controller */ + atmel_mxt_ts: touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_atmel_conn>; + reg = <0x4a>; + interrupt-parent = <&gpio5>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 / INT */ + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 106 / RST */ + status = "disabled"; + }; }; +/* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ &i2c2 { + /* Use low frequency to compensate for the high pull-up values. */ + clock-frequency = <40000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; @@ -119,7 +189,7 @@ scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - ad7879@2c { + ad7879_ts: touchscreen@2c { compatible = "adi,ad7879-1"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_ad7879_int>; @@ -140,23 +210,33 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + + port { + lcdif_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; }; +/* PWM */ &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; }; +/* PWM */ &pwm5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm5>; }; +/* PWM */ &pwm6 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm6>; }; +/* PWM */ &pwm7 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm7>; @@ -170,6 +250,7 @@ status = "disabled"; }; +/* Colibri UART_A */ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>; @@ -177,6 +258,7 @@ fsl,dte-mode; }; +/* Colibri UART_B */ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -184,12 +266,14 @@ fsl,dte-mode; }; +/* Colibri UART_C */ &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; fsl,dte-mode; }; +/* Colibri USBC */ &usbotg1 { dr_mode = "otg"; srp-disable; @@ -197,14 +281,28 @@ adp-disable; }; +/* Colibri USBH */ &usbotg2 { dr_mode = "host"; }; +/* Colibri MMC/SD */ &usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd_sleep>; assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>; assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; assigned-clock-rates = <0>, <198000000>; + bus-width = <4>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */ + disable-wp; + keep-power-in-suspend; + no-1-8-v; + vqmmc-supply = <®_sd1_vqmmc>; + wakeup-source; }; &wdog1 { @@ -214,13 +312,36 @@ }; &iomuxc { - pinctrl_can_int: canint-grp { + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x3000 /* SODIMM 8 */ + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x3000 /* SODIMM 6 */ + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x3000 /* SODIMM 4 */ + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x3000 /* SODIMM 2 */ + >; + }; + + pinctrl_atmel_adap: atmeladapgrp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0xb0a0 /* SODIMM 28 */ + MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0xb0a0 /* SODIMM 30 */ + >; + }; + + pinctrl_atmel_conn: atmelconngrp { + fsl,pins = < + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */ + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ + >; + }; + + pinctrl_can_int: canintgrp { fsl,pins = < MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x13010 /* SODIMM 73 */ >; }; - pinctrl_enet2: enet2-grp { + pinctrl_enet2: enet2grp { fsl,pins = < MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 @@ -235,7 +356,7 @@ >; }; - pinctrl_enet2_sleep: enet2sleepgrp { + pinctrl_enet2_sleep: enet2-sleepgrp { fsl,pins = < MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0 MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0 @@ -250,13 +371,13 @@ >; }; - pinctrl_ecspi1_cs: ecspi1-cs-grp { + pinctrl_ecspi1_cs: ecspi1csgrp { fsl,pins = < MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x70a0 /* SODIMM 86 */ >; }; - pinctrl_ecspi1: ecspi1-grp { + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0 /* SODIMM 88 */ MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0 /* SODIMM 92 */ @@ -264,27 +385,27 @@ >; }; - pinctrl_flexcan1: flexcan1-grp { + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020 MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020 >; }; - pinctrl_flexcan2: flexcan2-grp { + pinctrl_flexcan2: flexcan2grp { fsl,pins = < MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020 >; }; - pinctrl_gpio_bl_on: gpio-bl-on-grp { + pinctrl_gpio_bl_on: gpioblongrp { fsl,pins = < MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x30a0 /* SODIMM 71 */ >; }; - pinctrl_gpio1: gpio1-grp { + pinctrl_gpio1: gpio1grp { fsl,pins = < MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x10b0 /* SODIMM 77 */ MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x70a0 /* SODIMM 99 */ @@ -297,7 +418,7 @@ >; }; - pinctrl_gpio2: gpio2-grp { /* Camera */ + pinctrl_gpio2: gpio2grp { /* Camera */ fsl,pins = < MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x10b0 /* SODIMM 69 */ MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x10b0 /* SODIMM 75 */ @@ -307,26 +428,20 @@ >; }; - pinctrl_gpio3: gpio3-grp { /* CAN2 */ + pinctrl_gpio3: gpio3grp { /* CAN2 */ fsl,pins = < MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x10b0 /* SODIMM 178 */ MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x10b0 /* SODIMM 188 */ >; }; - pinctrl_gpio4: gpio4-grp { + pinctrl_gpio4: gpio4grp { fsl,pins = < MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x10b0 /* SODIMM 65 */ >; }; - pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */ - fsl,pins = < - MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */ - >; - }; - - pinctrl_gpio6: gpio6-grp { /* Wifi pins */ + pinctrl_gpio6: gpio6grp { /* Wifi pins */ fsl,pins = < MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x10b0 /* SODIMM 89 */ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0 /* SODIMM 79 */ @@ -338,7 +453,7 @@ >; }; - pinctrl_gpio7: gpio7-grp { /* CAN1 */ + pinctrl_gpio7: gpio7grp { /* CAN1 */ fsl,pins = < MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0xb0b0/* SODIMM 55 */ MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0xb0b0 /* SODIMM 63 */ @@ -347,9 +462,9 @@ /* * With an eMMC instead of a raw NAND device the following pins - * are available at SODIMM pins + * are available at SODIMM pins. */ - pinctrl_gpmi_gpio: gpmi-gpio-grp { + pinctrl_gpmi_gpio: gpmigpiogrp { fsl,pins = < MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10b0 /* SODIMM 140 */ MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x10b0 /* SODIMM 144 */ @@ -358,7 +473,7 @@ >; }; - pinctrl_gpmi_nand: gpmi-nand-grp { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9 MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x100a9 @@ -377,35 +492,35 @@ >; }; - pinctrl_i2c1: i2c1-grp { + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 /* SODIMM 196 */ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 /* SODIMM 194 */ >; }; - pinctrl_i2c1_gpio: i2c1-gpio-grp { + pinctrl_i2c1_gpio: i2c1-gpiogrp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 /* SODIMM 196 */ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 /* SODIMM 194 */ >; }; - pinctrl_i2c2: i2c2-grp { + pinctrl_i2c2: i2c2grp { fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b0 >; }; - pinctrl_i2c2_gpio: i2c2-gpio-grp { + pinctrl_i2c2_gpio: i2c2-gpiogrp { fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0 - MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001f8b0 + MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001f8b0 >; }; - pinctrl_lcdif_dat: lcdif-dat-grp { + pinctrl_lcdif_dat: lcdifdatgrp { fsl,pins = < MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079 /* SODIMM 76 */ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079 /* SODIMM 70 */ @@ -428,7 +543,7 @@ >; }; - pinctrl_lcdif_ctrl: lcdif-ctrl-grp { + pinctrl_lcdif_ctrl: lcdifctrlgrp { fsl,pins = < MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079 /* SODIMM 56 */ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079 /* SODIMM 44 */ @@ -437,31 +552,31 @@ >; }; - pinctrl_pwm4: pwm4-grp { + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079 /* SODIMM 59 */ >; }; - pinctrl_pwm5: pwm5-grp { + pinctrl_pwm5: pwm5grp { fsl,pins = < MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079 /* SODIMM 28 */ >; }; - pinctrl_pwm6: pwm6-grp { + pinctrl_pwm6: pwm6grp { fsl,pins = < MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079 /* SODIMM 30 */ >; }; - pinctrl_pwm7: pwm7-grp { + pinctrl_pwm7: pwm7grp { fsl,pins = < MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079 /* SODIMM 67 */ >; }; - pinctrl_uart1: uart1-grp { + pinctrl_uart1: uart1grp { fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1 /* SODIMM 33 */ MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1 /* SODIMM 35 */ @@ -470,16 +585,16 @@ >; }; - pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */ + pinctrl_uart1_ctrl1: uart1ctrl1grp { /* Additional DTR, DCD */ fsl,pins = < - MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 */ - MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 */ - MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 */ - MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 */ + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 / DCD */ + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 / DSR */ + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 / DTR */ + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 / RI */ >; }; - pinctrl_uart2: uart2-grp { + pinctrl_uart2: uart2grp { fsl,pins = < MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 /* SODIMM 36 */ MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 /* SODIMM 38 */ @@ -487,23 +602,23 @@ MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1 /* SODIMM 34 */ >; }; - pinctrl_uart5: uart5-grp { + pinctrl_uart5: uart5grp { fsl,pins = < MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1 /* SODIMM 19 */ MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1 /* SODIMM 21 */ >; }; - pinctrl_usbh_reg: gpio-usbh-reg { + pinctrl_usbh_reg: usbhreggrp { fsl,pins = < - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 */ + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 / USBH_PEN */ >; }; - pinctrl_usdhc1: usdhc1-grp { + pinctrl_usdhc1: usdhc1grp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 /* SODIMM 47 */ - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059 /* SODIMM 190 */ + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 /* SODIMM 47 */ + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 /* SODIMM 190 */ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 /* SODIMM 192 */ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 /* SODIMM 49 */ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 /* SODIMM 51 */ @@ -511,10 +626,10 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170b9 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 @@ -522,25 +637,25 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170f9 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100f9 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 >; }; - pinctrl_usdhc2: usdhc2-grp { + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17069 MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17069 MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17069 MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17069 MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17069 - MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17069 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10069 MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10 >; @@ -561,7 +676,7 @@ >; }; - pinctrl_wdog: wdog-grp { + pinctrl_wdog: wdoggrp { fsl,pins = < MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 >; @@ -569,65 +684,59 @@ }; &iomuxc_snvs { - pinctrl_snvs_gpio1: snvs-gpio1-grp { + pinctrl_snvs_gpio1: snvsgpio1grp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x110a0 /* SODIMM 93 */ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x110a0 /* SODIMM 95 */ MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x1b0a0 /* SODIMM 105 */ - MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 */ + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 / USBH_OC */ MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0 /* SODIMM 138 */ >; }; - pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */ - fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ - >; - }; - - pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */ + pinctrl_snvs_gpio3: snvsgpio3grp { /* Wifi pins */ fsl,pins = < MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 /* SODIMM 127 */ >; }; - pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */ + pinctrl_snvs_ad7879_int: snvsad7879intgrp { /* TOUCH Interrupt */ fsl,pins = < MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x100b0 >; }; - pinctrl_snvs_reg_sd: snvs-reg-sd-grp { + pinctrl_snvs_reg_sd: snvsregsdgrp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x400100b0 >; }; - pinctrl_snvs_usbc_det: snvs-usbc-det-grp { + pinctrl_snvs_usbc_det: snvsusbcdetgrp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x130b0 >; }; - pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp { + pinctrl_snvs_gpiokeys: snvsgpiokeysgrp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 */ + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 / WAKE_UP */ >; }; - pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp { + pinctrl_snvs_usdhc1_cd: snvsusdhc1cdgrp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 */ + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 / MMC_CD */ >; }; - pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp { + pinctrl_snvs_usdhc1_cd_sleep: snvsusdhc1cd-sleepgrp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0 >; }; - pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp { + pinctrl_snvs_wifi_pdn: snvswifipdngrp { fsl,pins = < MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 >; diff --git a/dts/src/arm/imx6ull-kontron-n6411-som.dtsi b/dts/src/arm/imx6ull-kontron-n6411-som.dtsi index b7e984284e..d000606c07 100644 --- a/dts/src/arm/imx6ull-kontron-n6411-som.dtsi +++ b/dts/src/arm/imx6ull-kontron-n6411-som.dtsi @@ -18,7 +18,7 @@ }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/dts/src/arm/imx6ull-phytec-tauri-emmc.dts b/dts/src/arm/imx6ull-phytec-tauri-emmc.dts new file mode 100644 index 0000000000..14adb87da9 --- /dev/null +++ b/dts/src/arm/imx6ull-phytec-tauri-emmc.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Alexander Bauer + */ + +/dts-v1/; +#include "imx6ull-phytec-tauri.dtsi" + +/ { + model = "PHYTEC phyGate-Tauri i.MX6 UltraLite"; + compatible = "phytec,imx6ull-phygate-tauri", + "phytec,imx6ull-phygate-tauri-emmc", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +/* EMMC-Version */ +&usdhc2 { + status = "okay"; +}; diff --git a/dts/src/arm/imx6ull-phytec-tauri-nand.dts b/dts/src/arm/imx6ull-phytec-tauri-nand.dts new file mode 100644 index 0000000000..ae396ac634 --- /dev/null +++ b/dts/src/arm/imx6ull-phytec-tauri-nand.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Alexander Bauer + */ + +/dts-v1/; +#include "imx6ull-phytec-tauri.dtsi" + +/ { + model = "PHYTEC phyGate-Tauri i.MX6 UltraLite"; + compatible = "phytec,imx6ull-phygate-tauri", + "phytec,imx6ull-phygate-tauri-nand", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +/* NAND-Version */ +&gpmi { + status = "okay"; +}; diff --git a/dts/src/arm/imx6ull-phytec-tauri.dtsi b/dts/src/arm/imx6ull-phytec-tauri.dtsi new file mode 100644 index 0000000000..5464a52a1f --- /dev/null +++ b/dts/src/arm/imx6ull-phytec-tauri.dtsi @@ -0,0 +1,588 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Alexander Bauer + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-phytec-phycore-som.dtsi" + +/ { + + model = "PHYTEC phyGate-Tauri i.MX6 UltraLite"; + compatible = "phytec,imx6ull-phygate-tauri", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; + + aliases { + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-key"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key { + label = "KEY-A"; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + reg_adc1_vref_3v3: regulator-vref-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_s25fl064_hold: regulator-s25fl064-hold { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_s25fl064_hold>; + compatible = "regulator-fixed"; + regulator-name = "s25fl064_hold"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb_hub_vbus: regulator-hub-otg1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhubpwr>; + compatible = "regulator-fixed"; + regulator-name = "usb_hub_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1pwr>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + user_leds: user-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_user_leds>, + <&pinctrl_user_leds_snvs>; + + user-led1 { + label = "yellow"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "off"; + }; + + user-led2 { + label = "red"; + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "off"; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>, + <&pinctrl_ecspi1_cs>; + cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>, + <&gpio3 10 GPIO_ACTIVE_LOW>, + <&gpio3 11 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm_tis: tpm@1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm>; + compatible = "tcg,tpm_tis-spi"; + reg = <1>; + spi-max-frequency = <20000000>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + }; + + s25fl064: flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = " jedec,spi-nor"; + reg = <2>; + spi-max-frequency = <40000000>; + m25p,fast-read; + status = "disabled"; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + dmas = <&sdma 7 8 0>, + <&sdma 8 8 0>; + dma-names = "rx", "tx"; + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + tmp102: tmp@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tempsense>; + interrupt-parent = <&gpio5>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + i2c_rtc: rtc@68 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + compatible = "microcrystal,rv4162"; + reg = <0x68>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&mdio { + ethphy2: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + status = "okay"; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm6>; + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm7>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +/* UART4 * RS485 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>; + rs485-rts-active-high; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +/* UART5 * RS232 */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + status = "okay"; +}; + +/* USB */ +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + vbus-supply = <®_usb_otg1_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_hub_vbus>; + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&usdhc2 { + status = "disabled"; +}; + +&iomuxc_snvs { + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; + + pinctrl_tempsense: tempsensegrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059 + >; + }; + + pinctrl_tpm: tpmgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 + >; + }; + + pinctrl_usbhubpwr: usbhubpwrgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x17059 + >; + }; + + pinctrl_user_leds_snvs: user_ledsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 + >; + }; +}; + +&iomuxc { + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x17059 /* nUART_MUX_RS232 */ + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x17059 /* nUART_MUX_DUAL_RX_TX */ + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x79 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x100b1 + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x100b1 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x100b1 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x100b1 + MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100b1 + MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x100b1 + >; + }; + + pinctrl_ecspi1_cs: ecspi1csgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0 + MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x10b0 + MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x10b0 + >; + }; + + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b010 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b010 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0b0b0 + MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0b0b0 + >; + }; + + princtrl_flexcan2_en: flexcan2engrp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x17059 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0xb0 + MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0xb0 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0xb0 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA01__I2C3_SCL 0xb0 + MX6UL_PAD_LCD_DATA00__I2C3_SDA 0xb0 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0xb0 + MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0xb0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA03__I2C4_SCL 0xb0 + MX6UL_PAD_LCD_DATA02__I2C4_SDA 0xb0 + >; + }; + + pinctrl_i2c4_gpio: i2c4gpiogrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0xb0 + MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0xb0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 + >; + }; + + pinctrl_pwm6: pwm6grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__PWM6_OUT 0x0b0b0 + >; + }; + + pinctrl_pwm7: pwm7grp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0b0b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0b0b0 + >; + }; + + pinctrl_s25fl064_hold: s25fl064holdgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x100b1 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b1 + MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x1b0b1 + MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x80 + >; + }; + + pinctrl_usbotg1pwr: usbotg1pwrgrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1100mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1200mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_user_leds: userledsgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x79 + >; + }; +}; diff --git a/dts/src/arm/imx6ull-tqma6ull2-mba6ulx.dts b/dts/src/arm/imx6ull-tqma6ull2-mba6ulx.dts new file mode 100644 index 0000000000..e593b7036f --- /dev/null +++ b/dts/src/arm/imx6ull-tqma6ull2-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +/dts-v1/; + +#include "imx6ull-tqma6ull2.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ-Systems TQMa6ULL2 SoM on MBa6ULx board"; + compatible = "tq,imx6ull-tqma6ull2-mba6ulx", "tq,imx6ull-tqma6ull2", "fsl,imx6ull"; +}; diff --git a/dts/src/arm/imx6ull-tqma6ull2.dtsi b/dts/src/arm/imx6ull-tqma6ull2.dtsi new file mode 100644 index 0000000000..326e6da91e --- /dev/null +++ b/dts/src/arm/imx6ull-tqma6ull2.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +#include "imx6ull.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulx-common.dtsi" + +/ { + model = "TQ-Systems TQMa6ULL2 SoM"; + compatible = "tq,imx6ull-tqma6ull2", "fsl,imx6ull"; +}; + +&usdhc2 { + fsl,tuning-step= <6>; + /* Errata ERR010450 Workaround */ + max-frequency = <99000000>; + assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; + assigned-clock-rates = <0>, <198000000>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017031 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017039 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017039 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017039 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017039 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017039 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017039 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017039 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017039 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017039 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/dts/src/arm/imx6ull-tqma6ull2l-mba6ulx.dts b/dts/src/arm/imx6ull-tqma6ull2l-mba6ulx.dts new file mode 100644 index 0000000000..33437aae98 --- /dev/null +++ b/dts/src/arm/imx6ull-tqma6ull2l-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +/dts-v1/; + +#include "imx6ull-tqma6ull2l.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ Systems TQMa6ULL2L SoM on MBa6ULx board"; + compatible = "tq,imx6ull-tqma6ull2l-mba6ulx", "tq,imx6ull-tqma6ull2l", "fsl,imx6ull"; +}; diff --git a/dts/src/arm/imx6ull-tqma6ull2l.dtsi b/dts/src/arm/imx6ull-tqma6ull2l.dtsi new file mode 100644 index 0000000000..8e4d5cd186 --- /dev/null +++ b/dts/src/arm/imx6ull-tqma6ull2l.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +#include "imx6ull.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulxl-common.dtsi" + +/ { + model = "TQ Systems TQMa6ULL2L SoM"; + compatible = "tq,imx6ull-tqma6ull2l", "fsl,imx6ull"; +}; + +&usdhc2 { + fsl,tuning-step= <6>; + /* Errata ERR010450 Workaround */ + max-frequency = <99000000>; + assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; + assigned-clock-rates = <0>, <198000000>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017031 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017039 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017039 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017039 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017039 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017039 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017039 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017039 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017039 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017039 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/dts/src/arm/imx7d-smegw01.dts b/dts/src/arm/imx7d-smegw01.dts new file mode 100644 index 0000000000..c6b32064a0 --- /dev/null +++ b/dts/src/arm/imx7d-smegw01.dts @@ -0,0 +1,469 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright (C) 2020 PHYTEC Messtechnik GmbH +// Author: Jens Lang +// Copyright (C) 2021 Fabio Estevam + +/dts-v1/; +#include +#include "imx7d.dtsi" + +/ { + model = "Storopack SMEGW01 board"; + compatible = "storopack,imx7d-smegw01", "fsl,imx7d"; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc3; + mmc2 = &usdhc2; + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_lte_on: regulator-lte-on { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lte_on>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "lte_on"; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_lte_nreset: regulator-lte-nreset { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lte_nreset>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "LTE_nReset"; + gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi>; + regulator-name = "wifi_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_wlan_rfkill: regulator-wlan-rfkill { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-2 = <&pinctrl_rfkill>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "wlan_rfkill"; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usbotg_vbus: regulator-usbotg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + status = "okay"; + + sram@0 { + compatible = "microchip,48l640"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + + ethphy1: ethernet-phy@2 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + reg = <2>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 =<&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + i2c_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + reg = <0x52>; + interrupt-parent = <&gpio2>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_lpsr>; + dr_mode = "otg"; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + no-1-8-v; + enable-sdio-wakeup; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + cap-sd-highspeed; + sd-uhs-ddr50; + mmc-ddr-1_8v; + vmmc-supply = <®_wifi>; + enable-sdio-wakeup; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + max-frequency = <200000000>; + bus-width = <8>; + fsl,tuning-step = <1>; + non-removable; + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x04 + MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x04 + MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x04 + MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x04 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x5 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x5 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x5 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x5 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x5 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x5 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x5 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x5 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x5 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x5 + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x7 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x7 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x5 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x5 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x5 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x5 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x5 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x5 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x5 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x5 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x5 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5 + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x5 + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x08 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000004 + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000004 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x0b0b0 + MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x0b0b0 + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x0b0b0 + >; + }; + + pinctrl_lte_on: lteongrp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x17059 + >; + }; + + pinctrl_lte_nreset: ltenresetgrp { + fsl,pins = < + MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x17059 + >; + }; + + pinctrl_rfkill: rfkillrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x17059 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x74 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x7c + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x7c + MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x74 + >; + }; + + pinctrl_usbotg1_lpsr: usbotg1 { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x04 + >; + }; + + pinctrl_usbotg1_pwr: usbotg1-pwr { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x04 + >; + }; + + pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x04 + >; + }; + + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x04 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + MX7D_PAD_SD2_CD_B__SD2_CD_B 0x08 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5d + MX7D_PAD_SD3_CLK__SD3_CLK 0x1d + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5d + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5d + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5d + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5d + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5d + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5d + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5d + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5d + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1d + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5e + MX7D_PAD_SD3_CLK__SD3_CLK 0x1e + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5e + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5e + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5e + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5e + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5e + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5e + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5e + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5e + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1e + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5f + MX7D_PAD_SD3_CLK__SD3_CLK 0x0f + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5f + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5f + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5f + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5f + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5f + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5f + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5f + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5f + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1f + >; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x04 + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x04 + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 + >; + }; +}; diff --git a/dts/src/arm/imx7s.dtsi b/dts/src/arm/imx7s.dtsi index 5af6d58666..008e3da460 100644 --- a/dts/src/arm/imx7s.dtsi +++ b/dts/src/arm/imx7s.dtsi @@ -446,7 +446,7 @@ status = "disabled"; }; - iomuxc_lpsr: iomuxc-lpsr@302c0000 { + iomuxc_lpsr: pinctrl@302c0000 { compatible = "fsl,imx7d-iomuxc-lpsr"; reg = <0x302c0000 0x10000>; fsl,input-sel = <&iomuxc>; diff --git a/dts/src/arm/imxrt1050-evk.dts b/dts/src/arm/imxrt1050-evk.dts new file mode 100644 index 0000000000..6a9c10decf --- /dev/null +++ b/dts/src/arm/imxrt1050-evk.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti + */ + +/dts-v1/; +#include "imxrt1050.dtsi" +#include "imxrt1050-pinfunc.h" + +/ { + model = "NXP IMXRT1050-evk board"; + compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050"; + + chosen { + stdout-path = &lpuart1; + }; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + mmc0 = &usdhc1; + serial0 = &lpuart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x2000000>; + }; +}; + +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1 + MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1 + >; + }; + + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000 + MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069 + MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061 + >; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc0>; + pinctrl-1 = <&pinctrl_usdhc0>; + pinctrl-2 = <&pinctrl_usdhc0>; + pinctrl-3 = <&pinctrl_usdhc0>; + cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/dts/src/arm/imxrt1050.dtsi b/dts/src/arm/imxrt1050.dtsi new file mode 100644 index 0000000000..77b911b060 --- /dev/null +++ b/dts/src/arm/imxrt1050.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti + */ + +#include "armv7-m.dtsi" +#include +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + + clocks { + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + osc3M: osc3M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3000000>; + }; + }; + + soc { + lpuart1: serial@40184000 { + compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x40184000 0x4000>; + interrupts = <20>; + clocks = <&clks IMXRT1050_CLK_LPUART1>; + clock-names = "ipg"; + status = "disabled"; + }; + + iomuxc: pinctrl@401f8000 { + compatible = "fsl,imxrt1050-iomuxc"; + reg = <0x401f8000 0x4000>; + fsl,mux_mask = <0x7>; + }; + + anatop: anatop@400d8000 { + compatible = "fsl,imxrt-anatop"; + reg = <0x400d8000 0x4000>; + }; + + clks: clock-controller@400fc000 { + compatible = "fsl,imxrt1050-ccm"; + reg = <0x400fc000 0x4000>; + interrupts = <95>, <96>; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL2_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>, + <&clks IMXRT1050_CLK_PLL2_PFD2_396M>; + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>, + <&clks IMXRT1050_CLK_PLL1_ARM>, + <&clks IMXRT1050_CLK_PLL2_SYS>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL2_SYS>; + }; + + edma1: dma-controller@400e8000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x400e8000 0x4000>, + <0x400ec000 0x4000>; + dma-channels = <32>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>; + clock-names = "dma", "dmamux0"; + clocks = <&clks IMXRT1050_CLK_DMA>, + <&clks IMXRT1050_CLK_DMA_MUX>; + }; + + usdhc1: mmc@402c0000 { + compatible ="fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x402c0000 0x4000>; + interrupts = <110>; + clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, + <&clks IMXRT1050_CLK_OSC>, + <&clks IMXRT1050_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,wp-controller; + no-1-8-v; + max-frequency = <4000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + gpio1: gpio@401b8000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401b8000 0x4000>; + interrupts = <80>, <81>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@401bc000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401bc000 0x4000>; + interrupts = <82>, <83>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@401c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c0000 0x4000>; + interrupts = <84>, <85>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@401c4000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c4000 0x4000>; + interrupts = <86>, <87>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@400c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x400c0000 0x4000>; + interrupts = <88>, <89>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpt: timer@401ec000 { + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt"; + reg = <0x401ec000 0x4000>; + interrupts = <100>; + clocks = <&osc3M>; + clock-names = "per"; + }; + }; +}; diff --git a/dts/src/arm/keystone-k2e-evm.dts b/dts/src/arm/keystone-k2e-evm.dts index 66fec5f5d0..5d6d074011 100644 --- a/dts/src/arm/keystone-k2e-evm.dts +++ b/dts/src/arm/keystone-k2e-evm.dts @@ -137,10 +137,10 @@ }; &spi0 { - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "Micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <54000000>; m25p,fast-read; reg = <0>; diff --git a/dts/src/arm/keystone-k2g-evm.dts b/dts/src/arm/keystone-k2g-evm.dts index d800f26b62..88be868cf7 100644 --- a/dts/src/arm/keystone-k2g-evm.dts +++ b/dts/src/arm/keystone-k2g-evm.dts @@ -392,7 +392,7 @@ pinctrl-0 = <&qspi_pins>; cdns,rclk-en; - flash0: m25p80@0 { + flash0: flash@0 { compatible = "s25fl512s", "jedec,spi-nor"; reg = <0>; spi-tx-bus-width = <1>; diff --git a/dts/src/arm/keystone-k2g-ice.dts b/dts/src/arm/keystone-k2g-ice.dts index 2a2d38cf0f..bd84d7f0f2 100644 --- a/dts/src/arm/keystone-k2g-ice.dts +++ b/dts/src/arm/keystone-k2g-ice.dts @@ -325,7 +325,7 @@ cdns,rclk-en; status = "okay"; - flash0: m25p80@0 { + flash0: flash@0 { compatible = "s25fl256s1", "jedec,spi-nor"; reg = <0>; spi-tx-bus-width = <1>; diff --git a/dts/src/arm/keystone-k2hk-evm.dts b/dts/src/arm/keystone-k2hk-evm.dts index ad4e22afe1..4a91f5ded4 100644 --- a/dts/src/arm/keystone-k2hk-evm.dts +++ b/dts/src/arm/keystone-k2hk-evm.dts @@ -161,10 +161,10 @@ }; &spi0 { - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "Micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <54000000>; m25p,fast-read; reg = <0>; diff --git a/dts/src/arm/keystone-k2l-evm.dts b/dts/src/arm/keystone-k2l-evm.dts index e200533d26..1c880cf8fa 100644 --- a/dts/src/arm/keystone-k2l-evm.dts +++ b/dts/src/arm/keystone-k2l-evm.dts @@ -110,10 +110,10 @@ }; &spi0 { - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "Micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <54000000>; m25p,fast-read; reg = <0>; diff --git a/dts/src/arm/kirkwood-dir665.dts b/dts/src/arm/kirkwood-dir665.dts index b3ad3f607d..c32300611d 100644 --- a/dts/src/arm/kirkwood-dir665.dts +++ b/dts/src/arm/kirkwood-dir665.dts @@ -78,7 +78,7 @@ spi@10600 { status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; diff --git a/dts/src/arm/kirkwood-synology.dtsi b/dts/src/arm/kirkwood-synology.dtsi index 217bd374e5..8f6c387d3a 100644 --- a/dts/src/arm/kirkwood-synology.dtsi +++ b/dts/src/arm/kirkwood-synology.dtsi @@ -198,7 +198,7 @@ spi@10600 { status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80", "jedec,spi-nor"; diff --git a/dts/src/arm/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/dts/src/arm/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts new file mode 100644 index 0000000000..0f555eb45b --- /dev/null +++ b/dts/src/arm/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS + */ + +/dts-v1/; +#include "lan966x-kontron-kswitch-d10-mmt.dtsi" + +/ { + model = "Kontron KSwitch D10 MMT 6G-2GS"; + compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921", + "microchip,lan9668", "microchip,lan966"; + + aliases { + i2c0 = &i2c4; + i2c1 = &i2c1; + }; + + sfp0: sfp0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c4>; + los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2500>; + tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>; + rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>; + rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>; + }; + + sfp1: sfp1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2500>; + tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>; + rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>; + rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&flx1 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c1: i2c@600 { + pinctrl-0 = <&fc1_c_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&flx4 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c4: i2c@600 { + pinctrl-0 = <&fc4_b_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&gpio { + fc1_c_pins: fc1-c-i2c-pins { + /* SCL, SDA */ + pins = "GPIO_47", "GPIO_48"; + function = "fc1_c"; + }; + + fc4_b_pins: fc4-b-i2c-pins { + /* SCL, SDA */ + pins = "GPIO_57", "GPIO_58"; + function = "fc4_b"; + }; +}; + +&port2 { + phys = <&serdes 2 SERDES6G(0)>; + sfp = <&sfp0>; + managed = "in-band-status"; + phy-mode = "sgmii"; + status = "okay"; +}; + +&port3 { + phys = <&serdes 3 SERDES6G(1)>; + sfp = <&sfp1>; + managed = "in-band-status"; + phy-mode = "sgmii"; + status = "okay"; +}; diff --git a/dts/src/arm/lan966x-kontron-kswitch-d10-mmt-8g.dts b/dts/src/arm/lan966x-kontron-kswitch-d10-mmt-8g.dts new file mode 100644 index 0000000000..5feef9a59a --- /dev/null +++ b/dts/src/arm/lan966x-kontron-kswitch-d10-mmt-8g.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for the Kontron KSwitch D10 MMT 8G + */ + +/dts-v1/; +#include "lan966x-kontron-kswitch-d10-mmt.dtsi" + +/ { + model = "Kontron KSwitch D10 MMT 8G"; + compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921", + "microchip,lan9668", "microchip,lan966"; +}; + +&mdio0 { + phy2: ethernet-phy@3 { + reg = <3>; + }; + + phy3: ethernet-phy@4 { + reg = <4>; + }; +}; + +&port2 { + phys = <&serdes 2 SERDES6G(0)>; + phy-handle = <&phy2>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; +}; + +&port3 { + phys = <&serdes 3 SERDES6G(1)>; + phy-handle = <&phy3>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; +}; diff --git a/dts/src/arm/lan966x-kontron-kswitch-d10-mmt.dtsi b/dts/src/arm/lan966x-kontron-kswitch-d10-mmt.dtsi new file mode 100644 index 0000000000..4cab1b3b3b --- /dev/null +++ b/dts/src/arm/lan966x-kontron-kswitch-d10-mmt.dtsi @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Common part of the device tree for the Kontron KSwitch D10 MMT + */ + +/dts-v1/; +#include "lan966x.dtsi" +#include "dt-bindings/phy/phy-lan966x-serdes.h" + +/ { + aliases { + serial0 = &usart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +&flx0 { + atmel,flexcom-mode = ; + status = "okay"; + + usart0: serial@200 { + pinctrl-0 = <&usart0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&flx3 { + atmel,flexcom-mode = ; + status = "okay"; + + spi3: spi@400 { + pinctrl-0 = <&fc3_b_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + }; +}; + +&gpio { + fc3_b_pins: fc3-b-pins { + /* SCK, MISO, MOSI */ + pins = "GPIO_51", "GPIO_52", "GPIO_53"; + function = "fc3_b"; + }; + + miim_c_pins: miim-c-pins { + /* MDC, MDIO */ + pins = "GPIO_59", "GPIO_60"; + function = "miim_c"; + }; + + sgpio_a_pins: sgpio-a-pins { + /* SCK, D0, D1 */ + pins = "GPIO_32", "GPIO_33", "GPIO_34"; + function = "sgpio_a"; + }; + + sgpio_b_pins: sgpio-b-pins { + /* LD */ + pins = "GPIO_64"; + function = "sgpio_b"; + }; + + usart0_pins: usart0-pins { + /* RXD, TXD */ + pins = "GPIO_25", "GPIO_26"; + function = "fc0_b"; + }; +}; + +&mdio0 { + pinctrl-0 = <&miim_c_pins>; + pinctrl-names = "default"; + reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + clock-frequency = <2500000>; + status = "okay"; + + phy4: ethernet-phy@5 { + reg = <5>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy5: ethernet-phy@6 { + reg = <6>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy6: ethernet-phy@7 { + reg = <7>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy7: ethernet-phy@8 { + reg = <8>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; +}; + +&mdio1 { + status = "okay"; +}; + +&phy0 { + status = "okay"; +}; + +&phy1 { + status = "okay"; +}; + +&port0 { + phys = <&serdes 0 CU(0)>; + phy-handle = <&phy0>; + phy-mode = "gmii"; + status = "okay"; +}; + +&port1 { + phys = <&serdes 1 CU(1)>; + phy-handle = <&phy1>; + phy-mode = "gmii"; + status = "okay"; +}; + +&port4 { + phys = <&serdes 4 SERDES6G(2)>; + phy-handle = <&phy4>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port5 { + phys = <&serdes 5 SERDES6G(2)>; + phy-handle = <&phy5>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port6 { + phys = <&serdes 6 SERDES6G(2)>; + phy-handle = <&phy6>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port7 { + phys = <&serdes 7 SERDES6G(2)>; + phy-handle = <&phy7>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&serdes { + status = "okay"; +}; + +&sgpio { + pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>; + pinctrl-names = "default"; + bus-frequency = <8000000>; + /* arbitrary range because all GPIOs are in software mode */ + microchip,sgpio-port-ranges = <0 11>; + status = "okay"; + + sgpio_in: gpio@0 { + ngpios = <128>; + }; + + sgpio_out: gpio@1 { + ngpios = <128>; + }; +}; + +&switch { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/dts/src/arm/lan966x-pcb8291.dts b/dts/src/arm/lan966x-pcb8291.dts index 3281af90ac..3c7e3a7d6f 100644 --- a/dts/src/arm/lan966x-pcb8291.dts +++ b/dts/src/arm/lan966x-pcb8291.dts @@ -35,7 +35,7 @@ function = "fc3_b"; }; - can0_b_pins: can0_b_pins { + can0_b_pins: can0-b-pins { /* RX, TX */ pins = "GPIO_35", "GPIO_36"; function = "can0_b"; diff --git a/dts/src/arm/lan966x.dtsi b/dts/src/arm/lan966x.dtsi index 7d28696480..3cb02fffe7 100644 --- a/dts/src/arm/lan966x.dtsi +++ b/dts/src/arm/lan966x.dtsi @@ -84,6 +84,68 @@ #size-cells = <1>; ranges; + switch: switch@e0000000 { + compatible = "microchip,lan966x-switch"; + reg = <0xe0000000 0x0100000>, + <0xe2000000 0x0800000>; + reg-names = "cpu", "gcb"; + interrupts = , + , + , + , + ; + interrupt-names = "xtr", "fdma", "ana", "ptp", + "ptp-ext"; + resets = <&reset 0>; + reset-names = "switch"; + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + port4: port@4 { + reg = <4>; + status = "disabled"; + }; + + port5: port@5 { + reg = <5>; + status = "disabled"; + }; + + port6: port@6 { + reg = <6>; + status = "disabled"; + }; + + port7: port@7 { + reg = <7>; + status = "disabled"; + }; + }; + }; + flx0: flexcom@e0040000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xe0040000 0x100>; @@ -92,6 +154,47 @@ #size-cells = <1>; ranges = <0x0 0xe0040000 0x800>; status = "disabled"; + + usart0: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi0: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; flx1: flexcom@e0044000 { @@ -102,6 +205,47 @@ #size-cells = <1>; ranges = <0x0 0xe0044000 0x800>; status = "disabled"; + + usart1: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, + <&dma0 AT91_XDMAC_DT_PERID(4)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi1: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, + <&dma0 AT91_XDMAC_DT_PERID(4)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, + <&dma0 AT91_XDMAC_DT_PERID(4)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; trng: rng@e0048000 { @@ -114,9 +258,9 @@ compatible = "atmel,at91sam9g46-aes"; reg = <0xe004c000 0x100>; interrupts = ; - dmas = <&dma0 AT91_XDMAC_DT_PERID(13)>, - <&dma0 AT91_XDMAC_DT_PERID(12)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>, + <&dma0 AT91_XDMAC_DT_PERID(13)>; + dma-names = "tx", "rx"; clocks = <&nic_clk>; clock-names = "aes_clk"; }; @@ -129,6 +273,47 @@ #size-cells = <1>; ranges = <0x0 0xe0060000 0x800>; status = "disabled"; + + usart2: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, + <&dma0 AT91_XDMAC_DT_PERID(6)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi2: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, + <&dma0 AT91_XDMAC_DT_PERID(6)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, + <&dma0 AT91_XDMAC_DT_PERID(6)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; flx3: flexcom@e0064000 { @@ -144,11 +329,42 @@ compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, + <&dma0 AT91_XDMAC_DT_PERID(8)>; + dma-names = "tx", "rx"; clocks = <&nic_clk>; clock-names = "usart"; atmel,fifo-size = <32>; status = "disabled"; }; + + spi3: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, + <&dma0 AT91_XDMAC_DT_PERID(8)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, + <&dma0 AT91_XDMAC_DT_PERID(8)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; dma0: dma-controller@e0068000 { @@ -178,6 +394,47 @@ #size-cells = <1>; ranges = <0x0 0xe0070000 0x800>; status = "disabled"; + + usart4: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, + <&dma0 AT91_XDMAC_DT_PERID(10)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi4: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, + <&dma0 AT91_XDMAC_DT_PERID(10)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = ; + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, + <&dma0 AT91_XDMAC_DT_PERID(10)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; timer0: timer@e008c000 { @@ -196,6 +453,11 @@ status = "disabled"; }; + cpu_ctrl: syscon@e00c0000 { + compatible = "microchip,lan966x-cpu-syscon", "syscon"; + reg = <0xe00c0000 0x350>; + }; + can0: can@e081c000 { compatible = "bosch,m_can"; reg = <0xe081c000 0xfc>, <0x00100000 0x4000>; @@ -211,10 +473,20 @@ status = "disabled"; }; + reset: reset-controller@e200400c { + compatible = "microchip,lan966x-switch-reset"; + reg = <0xe200400c 0x4>; + reg-names = "gcb"; + #reset-cells = <1>; + cpu-syscon = <&cpu_ctrl>; + }; + gpio: pinctrl@e2004064 { compatible = "microchip,lan966x-pinctrl"; reg = <0xe2004064 0xb4>, <0xe2010024 0x138>; + resets = <&reset 0>; + reset-names = "switch"; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&gpio 0 0 78>; @@ -223,6 +495,81 @@ #interrupt-cells = <2>; }; + mdio0: mdio@e2004118 { + compatible = "microchip,lan966x-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe2004118 0x24>; + clocks = <&sys_clk>; + status = "disabled"; + }; + + mdio1: mdio@e200413c { + compatible = "microchip,lan966x-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe200413c 0x24>, + <0xe2010020 0x4>; + clocks = <&sys_clk>; + status = "disabled"; + + phy0: ethernet-phy@1 { + reg = <1>; + interrupts = ; + status = "disabled"; + }; + + phy1: ethernet-phy@2 { + reg = <2>; + interrupts = ; + status = "disabled"; + }; + }; + + sgpio: gpio@e2004190 { + compatible = "microchip,sparx5-sgpio"; + reg = <0xe2004190 0x118>; + clocks = <&sys_clk>; + resets = <&reset 0>; + reset-names = "switch"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgpio_in: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + }; + + sgpio_out: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + }; + }; + + hwmon: hwmon@e2010180 { + compatible = "microchip,lan9668-hwmon"; + reg = <0xe2010180 0xc>, + <0xe20042a8 0xc>; + reg-names = "pvt", "fan"; + clocks = <&sys_clk>; + }; + + serdes: serdes@e202c000 { + compatible = "microchip,lan966x-serdes"; + reg = <0xe202c000 0x9c>, + <0xe2004010 0x4>; + #phy-cells = <2>; + status = "disabled"; + }; + gic: interrupt-controller@e8c11000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; diff --git a/dts/src/arm/logicpd-som-lv.dtsi b/dts/src/arm/logicpd-som-lv.dtsi index 55b619c99e..9ba0ea4eb4 100644 --- a/dts/src/arm/logicpd-som-lv.dtsi +++ b/dts/src/arm/logicpd-som-lv.dtsi @@ -27,6 +27,8 @@ /* HS USB Host PHY on PORT 1 */ hsusb2_phy: hsusb2_phy { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_reset_pin>; compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */ #phy-cells = <0>; @@ -144,6 +146,8 @@ }; &usbhshost { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_pins>; port2-mode = "ehci-phy"; }; @@ -151,10 +155,7 @@ phys = <0 &hsusb2_phy>; }; - &omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_pins>; mmc3_pins: pinmux_mm3_pins { pinctrl-single,pins = < @@ -250,8 +251,7 @@ }; &omap3_pmx_wkup { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_reset_pin>; + hsusb2_reset_pin: pinmux_hsusb1_reset_pin { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ diff --git a/dts/src/arm/ls1021a-iot.dts b/dts/src/arm/ls1021a-iot.dts new file mode 100644 index 0000000000..66bcdaf4b6 --- /dev/null +++ b/dts/src/arm/ls1021a-iot.dts @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021-2022 NXP + * + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A-IOT Board"; + compatible = "fsl,ls1021a-iot", "fsl,ls1021a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_3p3v: regulator-3V3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_2p5v: regulator-2V5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + frame-master; + bitclock-master; + }; + }; +}; + +&can0{ + status = "disabled"; +}; + +&can1{ + status = "disabled"; +}; + +&can2{ + status = "disabled"; +}; + +&can3{ + status = "okay"; +}; + +&dcu { + display = <&display>; + status = "okay"; + + display: display@0 { + bits-per-pixel = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: mode0 { + clock-frequency = <25000000>; + hactive = <640>; + vactive = <480>; + hback-porch = <80>; + hfront-porch = <80>; + vback-porch = <16>; + vfront-porch = <16>; + hsync-len = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&esdhc{ + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pca9555: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sgtl5000: audio-codec@2a { + #sound-dai-cells=<0x0>; + compatible = "fsl,sgtl5000"; + reg = <0x2a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_2p5v>; + clocks = <&sys_mclk>; + }; + + max1239: adc@35 { + compatible = "maxim,max1239"; + reg = <0x35>; + #io-channel-cells = <1>; + }; + + ina2201: core-monitor@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + ina2202: current-monitor@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + lm75b: thermal-monitor@48 { + compatible = "national,lm75b"; + reg = <0x48>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + num-cs = <2>; + status = "okay"; + + s25fl128s: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sai2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/dts/src/arm/ls1021a.dtsi b/dts/src/arm/ls1021a.dtsi index 2e69d6eab4..6c88be2a7e 100644 --- a/dts/src/arm/ls1021a.dtsi +++ b/dts/src/arm/ls1021a.dtsi @@ -122,8 +122,8 @@ interrupts = ; }; - ifc: ifc@1530000 { - compatible = "fsl,ifc", "simple-bus"; + ifc: memory-controller@1530000 { + compatible = "fsl,ifc"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = ; status = "disabled"; @@ -192,7 +192,7 @@ <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0x7 0x0>; }; }; diff --git a/dts/src/arm/mba6ulx.dtsi b/dts/src/arm/mba6ulx.dtsi new file mode 100644 index 0000000000..aac42df9ec --- /dev/null +++ b/dts/src/arm/mba6ulx.dtsi @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +/ { + model = "TQ-Systems MBA6ULx Baseboard"; + + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc1; + rtc0 = &rtc0; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <®_mba6ul_3v3>; + enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + beeper: beeper { + compatible = "gpio-beeper"; + gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>; + }; + + gpio_buttons: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buttons>; + + button1 { + label = "s14"; + linux,code = ; + gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>; + }; + + button2 { + label = "s6"; + linux,code = ; + gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>; + }; + + button3 { + label = "s7"; + linux,code = ; + gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>; + }; + + power-button { + label = "POWER"; + linux,code = ; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + status = "okay"; + + led1 { + label = "led1"; + gpios = <&expander_out1 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2 { + label = "led2"; + gpios = <&expander_out1 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_lcd_pwr: regulator-lcd-pwr { + compatible = "regulator-fixed"; + regulator-name = "lcd-pwr"; + gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_mba6ul_3v3: regulator-mba6ul-3v3 { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6ul-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_mba6ul_5v0: regulator-mba6ul-5v0 { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6ul-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_mpcie: regulator-mpcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "mpcie-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + startup-delay-us = <500000>; + vin-supply = <®_mba6ul_3v3>; + }; + + reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 { + compatible = "regulator-fixed"; + gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "otg2-vbus-supply-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_mpcie>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x6000000>; + linux,cma-default; + }; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "imx-audio-tlv320aic32x4"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + audio-asrc = <&asrc>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_mba6ul_3v3>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_mba6ul_3v3>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <768000000>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-cs = <1>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + phy-supply = <®_mba6ul_3v3>; + phy-reset-gpios = <&expander_out1 1 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-reset-post-delay = <1>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_mdc>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + phy-supply = <®_mba6ul_3v3>; + phy-reset-gpios = <&expander_out1 2 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-reset-post-delay = <1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + reg = <0>; + max-speed = <100>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>; + reg = <1>; + max-speed = <100>; + }; + }; +}; + +&i2c4 { + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&clks IMX6UL_CLK_SAI1>; + clock-names = "mclk"; + ldoin-supply = <®_mba6ul_3v3>; + iov-supply = <®_mba6ul_3v3>; + }; + + jc42: temperature-sensor@19 { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x19>; + }; + + expander_out0: gpio-expander@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + expander_in0: gpio-expander@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_expander_in0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + enet1_int-hog { + gpio-hog; + gpios = <6 0>; + input; + }; + + enet2_int-hog { + gpio-hog; + gpios = <7 0>; + input; + }; + }; + + expander_out1: gpio-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + analog_touch: touchscreen@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio4>; + interrupt-controller; + status = "disabled"; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */ + st,ave-ctrl = <3>; /* 8 sample average control */ + st,fraction-z = <7>; /* 7 length fractional part in z */ + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + st,mod-12b = <1>; /* 12-bit ADC */ + st,ref-sel = <0>; /* internal ADC reference */ + st,sample-time = <4>; /* ADC converstion time: 80 clocks */ + st,settling = <3>; /* 1 ms panel driver settling time */ + st,touch-det-delay = <5>; /* 5 ms touch detect interrupt delay */ + }; + }; + + /* NXP SE97BTP with temperature sensor + eeprom */ + se97b: eeprom@51 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>, + <&clks IMX6UL_CLK_SAI1>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <24000000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + /* for DTE mode, add below change */ + /* fsl,dte-mode; */ + /* pinctrl-0 = <&pinctrl_uart6dte>; */ + uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; + status = "okay"; +}; + +/* otg-port */ +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + power-active-high; + over-current-active-low; + /* we implement only dual role but not a fully featured OTG */ + hnp-disable; + srp-disable; + adp-disable; + dr_mode = "otg"; + status = "okay"; +}; + +/* 7-port usb hub */ +/* id, pwr, oc pins not connected */ +&usbotg2 { + disable-over-current; + vbus-supply = <®_otg2vbus_5v0>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + vmmc-supply = <®_mba6ul_3v3>; + vqmmc-supply = <®_vccsd>; + no-1-8-v; + no-mmc; + no-sdio; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_buttons: buttonsgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x100b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x1b020 + MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x1b020 + MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x1b020 + MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x1b020 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b0a8 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0a0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0a0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b0a8 + >; + }; + + pinctrl_enet2_mdc: enet2mdcgrp { + fsl,pins = < + /* mdio */ + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_expander_in0: expanderin0grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x1b0b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + /* 100 k PD, DSE 120 OHM, SPPEED LO */ + MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x00003050 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b1 + MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b1 + MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8 + MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0 + MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1 + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1 + MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x1b0b1 + MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_uart6dte: uart6dte { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x1b0b1 + MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x1b0b1 + MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x1b0b1 + MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x00017059 + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0001b0b0 + MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x0001b099 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x00017059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x00017059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x00017059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x00017059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x00017059 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170b9 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170f9 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0001b099 + >; + }; +}; diff --git a/dts/src/arm/meson8-minix-neo-x8.dts b/dts/src/arm/meson8-minix-neo-x8.dts index 61ec929ab8..56ea875c41 100644 --- a/dts/src/arm/meson8-minix-neo-x8.dts +++ b/dts/src/arm/meson8-minix-neo-x8.dts @@ -65,7 +65,7 @@ pinctrl-0 = <&spi_nor_pins>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25l1606e"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/mmp2.dtsi b/dts/src/arm/mmp2.dtsi index 46984d4c52..987d792f67 100644 --- a/dts/src/arm/mmp2.dtsi +++ b/dts/src/arm/mmp2.dtsi @@ -275,7 +275,9 @@ compatible = "marvell,pdma-1.0"; reg = <0xd4000000 0x10000>; interrupts = <48>; + /* For backwards compatibility: */ #dma-channels = <16>; + dma-channels = <16>; status = "disabled"; }; diff --git a/dts/src/arm/mt2701.dtsi b/dts/src/arm/mt2701.dtsi index 4776f85d6d..ef583cfd3b 100644 --- a/dts/src/arm/mt2701.dtsi +++ b/dts/src/arm/mt2701.dtsi @@ -564,7 +564,6 @@ clock-names = "jpgdec-smi", "jpgdec"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; }; @@ -577,7 +576,6 @@ clocks = <&imgsys CLK_IMG_VENC>; clock-names = "jpgenc"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>, <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>; }; diff --git a/dts/src/arm/mt7623n.dtsi b/dts/src/arm/mt7623n.dtsi index bcb0846e29..3adab5cd1f 100644 --- a/dts/src/arm/mt7623n.dtsi +++ b/dts/src/arm/mt7623n.dtsi @@ -121,7 +121,6 @@ clock-names = "jpgdec-smi", "jpgdec"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; }; @@ -144,7 +143,6 @@ interrupts = ; clocks = <&mmsys CLK_MM_DISP_OVL>; iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>; - mediatek,larb = <&larb0>; }; rdma0: rdma@14008000 { @@ -154,7 +152,6 @@ interrupts = ; clocks = <&mmsys CLK_MM_DISP_RDMA>; iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>; - mediatek,larb = <&larb0>; }; wdma@14009000 { @@ -164,7 +161,6 @@ interrupts = ; clocks = <&mmsys CLK_MM_DISP_WDMA>; iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>; - mediatek,larb = <&larb0>; }; bls: pwm@1400a000 { @@ -215,7 +211,6 @@ interrupts = ; clocks = <&mmsys CLK_MM_DISP_RDMA1>; iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>; - mediatek,larb = <&larb0>; }; dpi0: dpi@14014000 { diff --git a/dts/src/arm/nspire-classic.dtsi b/dts/src/arm/nspire-classic.dtsi index 41744cc2bc..01e1bb7c3c 100644 --- a/dts/src/arm/nspire-classic.dtsi +++ b/dts/src/arm/nspire-classic.dtsi @@ -17,7 +17,7 @@ &fast_timer { /* compatible = "lsi,zevio-timer"; */ - reg = <0x90010000 0x1000>, <0x900A0010 0x8>; + reg = <0x90010000 0x1000>, <0x900a0010 0x8>; }; &uart { @@ -30,12 +30,12 @@ &timer0 { /* compatible = "lsi,zevio-timer"; */ - reg = <0x900C0000 0x1000>, <0x900A0018 0x8>; + reg = <0x900c0000 0x1000>, <0x900a0018 0x8>; }; &timer1 { compatible = "lsi,zevio-timer"; - reg = <0x900D0000 0x1000>, <0x900A0020 0x8>; + reg = <0x900d0000 0x1000>, <0x900a0020 0x8>; }; &keypad { @@ -66,10 +66,10 @@ #address-cells = <1>; #size-cells = <1>; - intc: interrupt-controller@DC000000 { + intc: interrupt-controller@dc000000 { compatible = "lsi,zevio-intc"; interrupt-controller; - reg = <0xDC000000 0x1000>; + reg = <0xdc000000 0x1000>; #interrupt-cells = <1>; }; }; diff --git a/dts/src/arm/nspire-cx.dts b/dts/src/arm/nspire-cx.dts index 0c16b04e27..590b7dff6a 100644 --- a/dts/src/arm/nspire-cx.dts +++ b/dts/src/arm/nspire-cx.dts @@ -92,10 +92,10 @@ #address-cells = <1>; #size-cells = <1>; - intc: interrupt-controller@DC000000 { + intc: interrupt-controller@dc000000 { compatible = "arm,pl190-vic"; interrupt-controller; - reg = <0xDC000000 0x1000>; + reg = <0xdc000000 0x1000>; #interrupt-cells = <1>; }; diff --git a/dts/src/arm/nspire.dtsi b/dts/src/arm/nspire.dtsi index 90e033d914..bb240e6a3a 100644 --- a/dts/src/arm/nspire.dtsi +++ b/dts/src/arm/nspire.dtsi @@ -20,9 +20,9 @@ reg = <0x00000000 0x80000>; }; - sram: sram@A4000000 { + sram: sram@a4000000 { device = "memory"; - reg = <0xA4000000 0x20000>; + reg = <0xa4000000 0x20000>; }; timer_clk: timer_clk { @@ -33,12 +33,12 @@ base_clk: base_clk { #clock-cells = <0>; - reg = <0x900B0024 0x4>; + reg = <0x900b0024 0x4>; }; ahb_clk: ahb_clk { #clock-cells = <0>; - reg = <0x900B0024 0x4>; + reg = <0x900b0024 0x4>; clocks = <&base_clk>; }; @@ -71,28 +71,28 @@ #size-cells = <1>; ranges; - spi: spi@A9000000 { - reg = <0xA9000000 0x1000>; + spi: spi@a9000000 { + reg = <0xa9000000 0x1000>; }; - usb0: usb@B0000000 { + usb0: usb@b0000000 { compatible = "lsi,zevio-usb"; - reg = <0xB0000000 0x1000>; + reg = <0xb0000000 0x1000>; interrupts = <8>; usb-phy = <&usb_phy>; vbus-supply = <&vbus_reg>; }; - usb1: usb@B4000000 { - reg = <0xB4000000 0x1000>; + usb1: usb@b4000000 { + reg = <0xb4000000 0x1000>; interrupts = <9>; status = "disabled"; }; - lcd: lcd@C0000000 { + lcd: lcd@c0000000 { compatible = "arm,pl111", "arm,primecell"; - reg = <0xC0000000 0x1000>; + reg = <0xc0000000 0x1000>; interrupts = <21>; /* @@ -105,17 +105,17 @@ clock-names = "clcdclk", "apb_pclk"; }; - adc: adc@C4000000 { - reg = <0xC4000000 0x1000>; + adc: adc@c4000000 { + reg = <0xc4000000 0x1000>; interrupts = <11>; }; - tdes: crypto@C8010000 { - reg = <0xC8010000 0x1000>; + tdes: crypto@c8010000 { + reg = <0xc8010000 0x1000>; }; - sha256: crypto@CC000000 { - reg = <0xCC000000 0x1000>; + sha256: crypto@cc000000 { + reg = <0xcc000000 0x1000>; }; apb@90000000 { @@ -143,16 +143,16 @@ interrupts = <1>; }; - timer0: timer@900C0000 { - reg = <0x900C0000 0x1000>; + timer0: timer@900c0000 { + reg = <0x900c0000 0x1000>; clocks = <&timer_clk>, <&timer_clk>, <&timer_clk>; clock-names = "timer0clk", "timer1clk", "apb_pclk"; }; - timer1: timer@900D0000 { - reg = <0x900D0000 0x1000>; + timer1: timer@900d0000 { + reg = <0x900d0000 0x1000>; interrupts = <19>; clocks = <&timer_clk>, <&timer_clk>, <&timer_clk>; @@ -171,18 +171,18 @@ interrupts = <4>; }; - misc: misc@900A0000 { - reg = <0x900A0000 0x1000>; + misc: misc@900a0000 { + reg = <0x900a0000 0x1000>; }; - pwr: pwr@900B0000 { - reg = <0x900B0000 0x1000>; + pwr: pwr@900b0000 { + reg = <0x900b0000 0x1000>; interrupts = <15>; }; - keypad: input@900E0000 { + keypad: input@900e0000 { compatible = "ti,nspire-keypad"; - reg = <0x900E0000 0x1000>; + reg = <0x900e0000 0x1000>; interrupts = <16>; scan-interval = <1000>; @@ -191,8 +191,8 @@ clocks = <&apb_pclk>; }; - contrast: contrast@900F0000 { - reg = <0x900F0000 0x1000>; + contrast: contrast@900f0000 { + reg = <0x900f0000 0x1000>; }; led: led@90110000 { diff --git a/dts/src/arm/nuvoton-npcm730-gbs.dts b/dts/src/arm/nuvoton-npcm730-gbs.dts index eb6eb21cb2..d10669fcd5 100644 --- a/dts/src/arm/nuvoton-npcm730-gbs.dts +++ b/dts/src/arm/nuvoton-npcm730-gbs.dts @@ -358,7 +358,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -406,7 +406,7 @@ pinctrl-0 = <&spi3_pins>, <&spi3cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -416,7 +416,7 @@ m25p,fast-read; label = "pnor"; }; - spi-nor@1 { + flash@1 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/nuvoton-npcm730-gsj.dts b/dts/src/arm/nuvoton-npcm730-gsj.dts index d4ff49939a..491606c4f0 100644 --- a/dts/src/arm/nuvoton-npcm730-gsj.dts +++ b/dts/src/arm/nuvoton-npcm730-gsj.dts @@ -135,7 +135,7 @@ pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/nuvoton-npcm730-kudo.dts b/dts/src/arm/nuvoton-npcm730-kudo.dts index 82a104b2a6..a0c2d76526 100644 --- a/dts/src/arm/nuvoton-npcm730-kudo.dts +++ b/dts/src/arm/nuvoton-npcm730-kudo.dts @@ -380,7 +380,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -415,7 +415,7 @@ }; }; }; - spi-nor@1 { + flash@1 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -440,7 +440,7 @@ &fiu3 { pinctrl-0 = <&spi3_pins>; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/nuvoton-npcm750-evb.dts b/dts/src/arm/nuvoton-npcm750-evb.dts index 0334641f88..3dad32834e 100644 --- a/dts/src/arm/nuvoton-npcm750-evb.dts +++ b/dts/src/arm/nuvoton-npcm750-evb.dts @@ -67,7 +67,7 @@ &fiu0 { status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -128,7 +128,7 @@ &fiu3 { pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -324,7 +324,7 @@ &spi0 { cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; status = "okay"; - Flash@0 { + flash@0 { compatible = "winbond,w25q128", "jedec,spi-nor"; reg = <0x0>; @@ -345,7 +345,7 @@ &spi1 { cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; status = "okay"; - Flash@0 { + flash@0 { compatible = "winbond,w25q128fw", "jedec,spi-nor"; reg = <0x0>; diff --git a/dts/src/arm/nuvoton-npcm750-runbmc-olympus.dts b/dts/src/arm/nuvoton-npcm750-runbmc-olympus.dts index 767e0ac0df..132e702281 100644 --- a/dts/src/arm/nuvoton-npcm750-runbmc-olympus.dts +++ b/dts/src/arm/nuvoton-npcm750-runbmc-olympus.dts @@ -100,7 +100,7 @@ pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -139,7 +139,7 @@ }; }; - spi-nor@1 { + flash@1 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -166,7 +166,7 @@ pinctrl-0 = <&spi3_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/omap3-beagle-xm.dts b/dts/src/arm/omap3-beagle-xm.dts index a858ebfa15..35eced6521 100644 --- a/dts/src/arm/omap3-beagle-xm.dts +++ b/dts/src/arm/omap3-beagle-xm.dts @@ -370,7 +370,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/dts/src/arm/omap3430es1-clocks.dtsi b/dts/src/arm/omap3430es1-clocks.dtsi index 2ec3628d33..24adfac26b 100644 --- a/dts/src/arm/omap3430es1-clocks.dtsi +++ b/dts/src/arm/omap3430es1-clocks.dtsi @@ -46,37 +46,61 @@ ti,bit-shift = <2>; }; - d2d_26m_fck: d2d_26m_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&sys_ck>; - reg = <0x0a00>; - ti,bit-shift = <3>; - }; - - fshostusb_fck: fshostusb_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <5>; - }; - - ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1@a00 { - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <0>; - reg = <0x0a00>; - }; - - ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1@a40 { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <8>; - reg = <0x0a40>; - ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + d2d_26m_fck: clock-d2d-26m-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "d2d_26m_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <3>; + }; + + fshostusb_fck: clock-fshostusb-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "fshostusb_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <5>; + }; + + ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "ssi_ssr_gate_fck_3430es1"; + clocks = <&corex2_fck>; + ti,bit-shift = <0>; + }; + }; + + clock@a40 { + compatible = "ti,clksel"; + reg = <0xa40>; + #clock-cells = <2>; + #address-cells = <0>; + + ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clock-output-names = "ssi_ssr_div_fck_3430es1"; + clocks = <&corex2_fck>; + ti,bit-shift = <8>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + }; + + usb_l4_div_ick: clock-usb-l4-div-ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clock-output-names = "usb_l4_div_ick"; + clocks = <&l4_ick>; + ti,bit-shift = <4>; + ti,max-div = <1>; + ti,index-starts-at-one; + }; }; ssi_ssr_fck: ssi_ssr_fck_3430es1 { @@ -93,20 +117,43 @@ clock-div = <2>; }; - hsotgusb_ick_3430es1: hsotgusb_ick_3430es1@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-no-wait-interface-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <4>; - }; - - fac_ick: fac_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <8>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1 { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clock-output-names = "hsotgusb_ick_3430es1"; + clocks = <&core_l3_ick>; + ti,bit-shift = <4>; + }; + + fac_ick: clock-fac-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "fac_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <8>; + }; + + ssi_ick: clock-ssi-ick-3430es1 { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clock-output-names = "ssi_ick_3430es1"; + clocks = <&ssi_l4_ick>; + ti,bit-shift = <0>; + }; + + usb_l4_gate_ick: clock-usb-l4-gate-ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clock-output-names = "usb_l4_gate_ick"; + clocks = <&l4_ick>; + ti,bit-shift = <5>; + }; }; ssi_l4_ick: ssi_l4_ick { @@ -117,45 +164,26 @@ clock-div = <1>; }; - ssi_ick: ssi_ick_3430es1@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-no-wait-interface-clock"; - clocks = <&ssi_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <0>; - }; - - usb_l4_gate_ick: usb_l4_gate_ick@a10 { - #clock-cells = <0>; - compatible = "ti,composite-interface-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <5>; - reg = <0x0a10>; - }; - - usb_l4_div_ick: usb_l4_div_ick@a40 { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <4>; - ti,max-div = <1>; - reg = <0x0a40>; - ti,index-starts-at-one; - }; - usb_l4_ick: usb_l4_ick { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; }; - dss1_alwon_fck: dss1_alwon_fck_3430es1@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll4_m4x2_ck>; - ti,bit-shift = <0>; - reg = <0x0e00>; - ti,set-rate-parent; + clock@e00 { + compatible = "ti,clksel"; + reg = <0xe00>; + #clock-cells = <2>; + #address-cells = <0>; + + dss1_alwon_fck: clock-dss1-alwon-fck-3430es1 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss1_alwon_fck_3430es1"; + clocks = <&dpll4_m4x2_ck>; + ti,bit-shift = <0>; + ti,set-rate-parent; + }; }; dss_ick: dss_ick_3430es1@e10 { diff --git a/dts/src/arm/omap34xx-omap36xx-clocks.dtsi b/dts/src/arm/omap34xx-omap36xx-clocks.dtsi index 21079cdf26..8374532f20 100644 --- a/dts/src/arm/omap34xx-omap36xx-clocks.dtsi +++ b/dts/src/arm/omap34xx-omap36xx-clocks.dtsi @@ -13,45 +13,76 @@ clock-div = <1>; }; - aes1_ick: aes1_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - ti,bit-shift = <3>; - reg = <0x0a14>; - }; + clock@a14 { + compatible = "ti,clksel"; + reg = <0xa14>; + #clock-cells = <2>; + #address-cells = <0>; - rng_ick: rng_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - reg = <0x0a14>; - ti,bit-shift = <2>; - }; + aes1_ick: clock-aes1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "aes1_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <3>; + }; - sha11_ick: sha11_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - reg = <0x0a14>; - ti,bit-shift = <1>; - }; + rng_ick: clock-rng-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "rng_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <2>; + }; - des1_ick: des1_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - reg = <0x0a14>; - ti,bit-shift = <0>; + sha11_ick: clock-sha11-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "sha11_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <1>; + }; + + des1_ick: clock-des1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "des1_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <0>; + }; + + pka_ick: clock-pka-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "pka_ick"; + clocks = <&security_l3_ick>; + ti,bit-shift = <4>; + }; }; - cam_mclk: cam_mclk@f00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll4_m5x2_ck>; - ti,bit-shift = <0>; - reg = <0x0f00>; - ti,set-rate-parent; + /* CM_FCLKEN_CAM */ + clock@f00 { + compatible = "ti,clksel"; + reg = <0xf00>; + #clock-cells = <2>; + #address-cells = <0>; + + cam_mclk: clock-cam-mclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "cam_mclk"; + clocks = <&dpll4_m5x2_ck>; + ti,bit-shift = <0>; + ti,set-rate-parent; + }; + + csi2_96m_fck: clock-csi2-96m-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "csi2_96m_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <1>; + }; }; cam_ick: cam_ick@f10 { @@ -62,14 +93,6 @@ ti,bit-shift = <0>; }; - csi2_96m_fck: csi2_96m_fck@f00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0f00>; - ti,bit-shift = <1>; - }; - security_l3_ick: security_l3_ick { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -78,44 +101,51 @@ clock-div = <1>; }; - pka_ick: pka_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l3_ick>; - reg = <0x0a14>; - ti,bit-shift = <4>; - }; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; - icr_ick: icr_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <29>; - }; + icr_ick: clock-icr-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "icr_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <29>; + }; - des2_ick: des2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <26>; - }; + des2_ick: clock-des2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "des2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <26>; + }; - mspro_ick: mspro_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <23>; - }; + mspro_ick: clock-mspro-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mspro_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <23>; + }; - mailboxes_ick: mailboxes_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <7>; + mailboxes_ick: clock-mailboxes-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mailboxes_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <7>; + }; + + sad2d_ick: clock-sad2d-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "sad2d_ick"; + clocks = <&l3_ick>; + ti,bit-shift = <3>; + }; }; ssi_l4_ick: ssi_l4_ick { @@ -126,20 +156,27 @@ clock-div = <1>; }; - sr1_fck: sr1_fck@c00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&sys_ck>; - reg = <0x0c00>; - ti,bit-shift = <6>; - }; + clock@c00 { + compatible = "ti,clksel"; + reg = <0xc00>; + #clock-cells = <2>; + #address-cells = <0>; - sr2_fck: sr2_fck@c00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&sys_ck>; - reg = <0x0c00>; - ti,bit-shift = <7>; + sr1_fck: clock-sr1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "sr1_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + }; + + sr2_fck: clock-sr2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "sr2_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <7>; + }; }; sr_l4_ick: sr_l4_ick { @@ -187,37 +224,45 @@ ti,bit-shift = <0>; }; - modem_fck: modem_fck@a00 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&sys_ck>; - reg = <0x0a00>; - ti,bit-shift = <31>; - }; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; - sad2d_ick: sad2d_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <3>; - }; + modem_fck: clock-modem-fck { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "modem_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <31>; + }; - mad2d_ick: mad2d_ick@a18 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&l3_ick>; - reg = <0x0a18>; - ti,bit-shift = <3>; + mspro_fck: clock-mspro-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mspro_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <23>; + }; }; - mspro_fck: mspro_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <23>; + /* CM_ICLKEN3_CORE */ + clock@a18 { + compatible = "ti,clksel"; + reg = <0xa18>; + #clock-cells = <2>; + #address-cells = <0>; + + mad2d_ick: clock-mad2d-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mad2d_ick"; + clocks = <&l3_ick>; + ti,bit-shift = <3>; + }; }; + }; &cm_clockdomains { diff --git a/dts/src/arm/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/dts/src/arm/omap36xx-am35xx-omap3430es2plus-clocks.dtsi index 9974d52269..dcc5cfcd1f 100644 --- a/dts/src/arm/omap36xx-am35xx-omap3430es2plus-clocks.dtsi +++ b/dts/src/arm/omap36xx-am35xx-omap3430es2plus-clocks.dtsi @@ -133,37 +133,66 @@ ti,bit-shift = <2>; }; - usbtll_ick: usbtll_ick@a18 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a18>; - ti,bit-shift = <2>; + /* CM_ICLKEN3_CORE */ + clock@a18 { + compatible = "ti,clksel"; + reg = <0xa18>; + #clock-cells = <2>; + #address-cells = <0>; + + usbtll_ick: clock-usbtll-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "usbtll_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <2>; + }; }; - mmchs3_ick: mmchs3_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <30>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + mmchs3_ick: clock-mmchs3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mmchs3_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <30>; + }; }; - mmchs3_fck: mmchs3_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <30>; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + mmchs3_fck: clock-mmchs3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mmchs3_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <30>; + }; }; - dss1_alwon_fck: dss1_alwon_fck_3430es2@e00 { - #clock-cells = <0>; - compatible = "ti,dss-gate-clock"; - clocks = <&dpll4_m4x2_ck>; - ti,bit-shift = <0>; - reg = <0x0e00>; - ti,set-rate-parent; + clock@e00 { + compatible = "ti,clksel"; + reg = <0xe00>; + #clock-cells = <2>; + #address-cells = <0>; + + dss1_alwon_fck: clock-dss1-alwon-fck-3430es2 { + #clock-cells = <0>; + compatible = "ti,dss-gate-clock"; + clock-output-names = "dss1_alwon_fck_3430es2"; + clocks = <&dpll4_m4x2_ck>; + ti,bit-shift = <0>; + ti,set-rate-parent; + }; }; dss_ick: dss_ick_3430es2@e10 { diff --git a/dts/src/arm/omap36xx-clocks.dtsi b/dts/src/arm/omap36xx-clocks.dtsi index 4e9cc90035..c5fdb2bd76 100644 --- a/dts/src/arm/omap36xx-clocks.dtsi +++ b/dts/src/arm/omap36xx-clocks.dtsi @@ -58,12 +58,19 @@ ti,set-bit-to-disable; }; - uart4_fck: uart4_fck@1000 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&per_48m_fck>; + clock@1000 { + compatible = "ti,clksel"; reg = <0x1000>; - ti,bit-shift = <18>; + #clock-cells = <2>; + #address-cells = <0>; + + uart4_fck: clock-uart4-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart4_fck"; + clocks = <&per_48m_fck>; + ti,bit-shift = <18>; + }; }; }; diff --git a/dts/src/arm/omap36xx-omap3430es2plus-clocks.dtsi b/dts/src/arm/omap36xx-omap3430es2plus-clocks.dtsi index 945537aee3..c94eb86d3d 100644 --- a/dts/src/arm/omap36xx-omap3430es2plus-clocks.dtsi +++ b/dts/src/arm/omap36xx-omap3430es2plus-clocks.dtsi @@ -5,21 +5,35 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &cm_clocks { - ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 { - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <0>; - reg = <0x0a00>; - }; - - ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2@a40 { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <8>; - reg = <0x0a40>; - ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "ssi_ssr_gate_fck_3430es2"; + clocks = <&corex2_fck>; + ti,bit-shift = <0>; + }; + }; + + clock@a40 { + compatible = "ti,clksel"; + reg = <0xa40>; + #clock-cells = <2>; + #address-cells = <0>; + + ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clock-output-names = "ssi_ssr_div_fck_3430es2"; + clocks = <&corex2_fck>; + ti,bit-shift = <8>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + }; }; ssi_ssr_fck: ssi_ssr_fck_3430es2 { @@ -36,12 +50,27 @@ clock-div = <2>; }; - hsotgusb_ick_3430es2: hsotgusb_ick_3430es2@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-hsotgusb-interface-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <4>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2 { + #clock-cells = <0>; + compatible = "ti,omap3-hsotgusb-interface-clock"; + clock-output-names = "hsotgusb_ick_3430es2"; + clocks = <&core_l3_ick>; + ti,bit-shift = <4>; + }; + + ssi_ick: clock-ssi-ick-3430es2 { + #clock-cells = <0>; + compatible = "ti,omap3-ssi-interface-clock"; + clock-output-names = "ssi_ick_3430es2"; + clocks = <&ssi_l4_ick>; + ti,bit-shift = <0>; + }; }; ssi_l4_ick: ssi_l4_ick { @@ -52,20 +81,19 @@ clock-div = <1>; }; - ssi_ick: ssi_ick_3430es2@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-ssi-interface-clock"; - clocks = <&ssi_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <0>; - }; + clock@c00 { + compatible = "ti,clksel"; + reg = <0xc00>; + #clock-cells = <2>; + #address-cells = <0>; - usim_gate_fck: usim_gate_fck@c00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&omap_96m_fck>; - ti,bit-shift = <9>; - reg = <0x0c00>; + usim_gate_fck: clock-usim-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "usim_gate_fck"; + clocks = <&omap_96m_fck>; + ti,bit-shift = <9>; + }; }; sys_d2_ck: sys_d2_ck { @@ -140,13 +168,20 @@ clock-div = <20>; }; - usim_mux_fck: usim_mux_fck@c40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>; - ti,bit-shift = <3>; - reg = <0x0c40>; - ti,index-starts-at-one; + clock@c40 { + compatible = "ti,clksel"; + reg = <0xc40>; + #clock-cells = <2>; + #address-cells = <0>; + + usim_mux_fck: clock-usim-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "usim_mux_fck"; + clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>; + ti,bit-shift = <3>; + ti,index-starts-at-one; + }; }; usim_fck: usim_fck { @@ -155,12 +190,19 @@ clocks = <&usim_gate_fck>, <&usim_mux_fck>; }; - usim_ick: usim_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <9>; + clock@c10 { + compatible = "ti,clksel"; + reg = <0xc10>; + #clock-cells = <2>; + #address-cells = <0>; + + usim_ick: clock-usim-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "usim_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <9>; + }; }; }; diff --git a/dts/src/arm/omap3xxx-clocks.dtsi b/dts/src/arm/omap3xxx-clocks.dtsi index 0656c32439..2e13ca11ce 100644 --- a/dts/src/arm/omap3xxx-clocks.dtsi +++ b/dts/src/arm/omap3xxx-clocks.dtsi @@ -78,12 +78,35 @@ }; &scm_clocks { - mcbsp5_mux_fck: mcbsp5_mux_fck@68 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&core_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <4>; + /* CONTROL_DEVCONF1 */ + clock@68 { + compatible = "ti,clksel"; reg = <0x68>; + #clock-cells = <2>; + #address-cells = <0>; + + mcbsp5_mux_fck: clock-mcbsp5-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp5_mux_fck"; + clocks = <&core_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <4>; + }; + + mcbsp3_mux_fck: clock-mcbsp3-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp3_mux_fck"; + clocks = <&per_96m_fck>, <&mcbsp_clks>; + }; + + mcbsp4_mux_fck: clock-mcbsp4-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp4_mux_fck"; + clocks = <&per_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + }; }; mcbsp5_fck: mcbsp5_fck { @@ -92,12 +115,28 @@ clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>; }; - mcbsp1_mux_fck: mcbsp1_mux_fck@4 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&core_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <2>; - reg = <0x04>; + /* CONTROL_DEVCONF0 */ + clock@4 { + compatible = "ti,clksel"; + reg = <0x4>; + #clock-cells = <2>; + #address-cells = <0>; + + mcbsp1_mux_fck: clock-mcbsp1-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp1_mux_fck"; + clocks = <&core_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + }; + + mcbsp2_mux_fck: clock-mcbsp2-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp2_mux_fck"; + clocks = <&per_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <6>; + }; }; mcbsp1_fck: mcbsp1_fck { @@ -106,41 +145,18 @@ clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>; }; - mcbsp2_mux_fck: mcbsp2_mux_fck@4 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&per_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <6>; - reg = <0x04>; - }; - mcbsp2_fck: mcbsp2_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>; }; - mcbsp3_mux_fck: mcbsp3_mux_fck@68 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&per_96m_fck>, <&mcbsp_clks>; - reg = <0x68>; - }; - mcbsp3_fck: mcbsp3_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>; }; - mcbsp4_mux_fck: mcbsp4_mux_fck@68 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&per_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <2>; - reg = <0x68>; - }; - mcbsp4_fck: mcbsp4_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; @@ -238,14 +254,87 @@ reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>; }; - dpll3_m3_ck: dpll3_m3_ck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll3_ck>; - ti,bit-shift = <16>; - ti,max-div = <31>; + /* CM_CLKSEL1_EMU */ + clock@1140 { + compatible = "ti,clksel"; reg = <0x1140>; - ti,index-starts-at-one; + #clock-cells = <2>; + #address-cells = <0>; + + dpll3_m3_ck: clock-dpll3-m3 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll3_m3_ck"; + clocks = <&dpll3_ck>; + ti,bit-shift = <16>; + ti,max-div = <31>; + ti,index-starts-at-one; + }; + + dpll4_m6_ck: clock-dpll4-m6 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll4_m6_ck"; + clocks = <&dpll4_ck>; + ti,bit-shift = <24>; + ti,max-div = <63>; + ti,index-starts-at-one; + }; + + emu_src_mux_ck: clock-emu-src-mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "emu_src_mux_ck"; + clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; + }; + + pclk_fck: clock-pclk-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "pclk_fck"; + clocks = <&emu_src_ck>; + ti,bit-shift = <8>; + ti,max-div = <7>; + ti,index-starts-at-one; + }; + + pclkx2_fck: clock-pclkx2-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "pclkx2_fck"; + clocks = <&emu_src_ck>; + ti,bit-shift = <6>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + atclk_fck: clock-atclk-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "atclk_fck"; + clocks = <&emu_src_ck>; + ti,bit-shift = <4>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + traceclk_src_fck: clock-traceclk-src-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "traceclk_src_fck"; + clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; + ti,bit-shift = <2>; + }; + + traceclk_fck: clock-traceclk-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "traceclk_fck"; + clocks = <&traceclk_src_fck>; + ti,bit-shift = <11>; + ti,max-div = <7>; + ti,index-starts-at-one; + }; }; dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck { @@ -285,16 +374,6 @@ clock-frequency = <0x0>; }; - dpll3_m2_ck: dpll3_m2_ck@d40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll3_ck>; - ti,bit-shift = <27>; - ti,max-div = <31>; - reg = <0x0d40>; - ti,index-starts-at-one; - }; - core_ck: core_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -345,22 +424,73 @@ clock-div = <1>; }; - omap_96m_fck: omap_96m_fck@d40 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&cm_96m_fck>, <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x0d40>; - }; - - dpll4_m3_ck: dpll4_m3_ck@e40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll4_ck>; - ti,bit-shift = <8>; - ti,max-div = <32>; - reg = <0x0e40>; - ti,index-starts-at-one; + /* CM_CLKSEL1_PLL */ + clock@d40 { + compatible = "ti,clksel"; + reg = <0xd40>; + #clock-cells = <2>; + #address-cells = <0>; + + dpll3_m2_ck: clock-dpll3-m2 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll3_m2_ck"; + clocks = <&dpll3_ck>; + ti,bit-shift = <27>; + ti,max-div = <31>; + ti,index-starts-at-one; + }; + + omap_96m_fck: clock-omap-96m-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "omap_96m_fck"; + clocks = <&cm_96m_fck>, <&sys_ck>; + ti,bit-shift = <6>; + }; + + omap_54m_fck: clock-omap-54m-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "omap_54m_fck"; + clocks = <&dpll4_m3x2_ck>, <&sys_altclk>; + ti,bit-shift = <5>; + }; + + omap_48m_fck: clock-omap-48m-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "omap_48m_fck"; + clocks = <&cm_96m_d2_fck>, <&sys_altclk>; + ti,bit-shift = <3>; + }; + }; + + /* CM_CLKSEL_DSS */ + clock@e40 { + compatible = "ti,clksel"; + reg = <0xe40>; + #clock-cells = <2>; + #address-cells = <0>; + + dpll4_m3_ck: clock-dpll4-m3 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll4_m3_ck"; + clocks = <&dpll4_ck>; + ti,bit-shift = <8>; + ti,max-div = <32>; + ti,index-starts-at-one; + }; + + dpll4_m4_ck: clock-dpll4-m4 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll4_m4_ck"; + clocks = <&dpll4_ck>; + ti,max-div = <16>; + ti,index-starts-at-one; + }; }; dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck { @@ -380,14 +510,6 @@ ti,set-bit-to-disable; }; - omap_54m_fck: omap_54m_fck@d40 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dpll4_m3x2_ck>, <&sys_altclk>; - ti,bit-shift = <5>; - reg = <0x0d40>; - }; - cm_96m_d2_fck: cm_96m_d2_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -396,14 +518,6 @@ clock-div = <2>; }; - omap_48m_fck: omap_48m_fck@d40 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&cm_96m_d2_fck>, <&sys_altclk>; - ti,bit-shift = <3>; - reg = <0x0d40>; - }; - omap_12m_fck: omap_12m_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -412,15 +526,6 @@ clock-div = <4>; }; - dpll4_m4_ck: dpll4_m4_ck@e40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll4_ck>; - ti,max-div = <16>; - reg = <0x0e40>; - ti,index-starts-at-one; - }; - dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; @@ -468,16 +573,6 @@ ti,set-rate-parent; }; - dpll4_m6_ck: dpll4_m6_ck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll4_ck>; - ti,bit-shift = <24>; - ti,max-div = <63>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -503,19 +598,37 @@ clock-div = <1>; }; - clkout2_src_gate_ck: clkout2_src_gate_ck@d70 { - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clocks = <&core_ck>; - ti,bit-shift = <7>; - reg = <0x0d70>; - }; - - clkout2_src_mux_ck: clkout2_src_mux_ck@d70 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>; - reg = <0x0d70>; + /* CM_CLKOUT_CTRL */ + clock@d70 { + compatible = "ti,clksel"; + reg = <0xd70>; + #clock-cells = <2>; + #address-cells = <0>; + + clkout2_src_gate_ck: clock-clkout2-src-gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "clkout2_src_gate_ck"; + clocks = <&core_ck>; + ti,bit-shift = <7>; + }; + + clkout2_src_mux_ck: clock-clkout2-src-mux { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "clkout2_src_mux_ck"; + clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>; + }; + + sys_clkout2: clock-sys-clkout2 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "sys_clkout2"; + clocks = <&clkout2_src_ck>; + ti,bit-shift = <3>; + ti,max-div = <64>; + ti,index-power-of-two; + }; }; clkout2_src_ck: clkout2_src_ck { @@ -524,16 +637,6 @@ clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>; }; - sys_clkout2: sys_clkout2@d70 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout2_src_ck>; - ti,bit-shift = <3>; - ti,max-div = <64>; - reg = <0x0d70>; - ti,index-power-of-two; - }; - mpu_ck: mpu_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -558,49 +661,208 @@ clock-div = <1>; }; - l3_ick: l3_ick@a40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&core_ck>; - ti,max-div = <3>; - reg = <0x0a40>; - ti,index-starts-at-one; - }; - - l4_ick: l4_ick@a40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&l3_ick>; - ti,bit-shift = <2>; - ti,max-div = <3>; - reg = <0x0a40>; - ti,index-starts-at-one; - }; - - rm_ick: rm_ick@c40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <1>; - ti,max-div = <3>; - reg = <0x0c40>; - ti,index-starts-at-one; - }; - - gpt10_gate_fck: gpt10_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <11>; - reg = <0x0a00>; - }; - - gpt10_mux_fck: gpt10_mux_fck@a40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x0a40>; + /* CM_CLKSEL_CORE */ + clock@a40 { + compatible = "ti,clksel"; + reg = <0xa40>; + #clock-cells = <2>; + #address-cells = <0>; + + l3_ick: clock-l3-ick { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "l3_ick"; + clocks = <&core_ck>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + l4_ick: clock-l4-ick { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "l4_ick"; + clocks = <&l3_ick>; + ti,bit-shift = <2>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + gpt10_mux_fck: clock-gpt10-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt10_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <6>; + }; + + gpt11_mux_fck: clock-gpt11-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt11_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <7>; + }; + }; + + /* CM_CLKSEL_WKUP */ + clock@c40 { + compatible = "ti,clksel"; + reg = <0xc40>; + #clock-cells = <2>; + #address-cells = <0>; + + rm_ick: clock-rm-ick { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "rm_ick"; + clocks = <&l4_ick>; + ti,bit-shift = <1>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + gpt1_mux_fck: clock-gpt1-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt1_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + }; + }; + + /* CM_FCLKEN1_CORE */ + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + gpt10_gate_fck: clock-gpt10-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt10_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <11>; + }; + + gpt11_gate_fck: clock-gpt11-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt11_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <12>; + }; + + mmchs2_fck: clock-mmchs2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mmchs2_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <25>; + }; + + mmchs1_fck: clock-mmchs1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mmchs1_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <24>; + }; + + i2c3_fck: clock-i2c3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "i2c3_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <17>; + }; + + i2c2_fck: clock-i2c2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "i2c2_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <16>; + }; + + i2c1_fck: clock-i2c1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "i2c1_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <15>; + }; + + mcbsp5_gate_fck: clock-mcbsp5-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp5_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <10>; + }; + + mcbsp1_gate_fck: clock-mcbsp1-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp1_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <9>; + }; + + mcspi4_fck: clock-mcspi4-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi4_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <21>; + }; + + mcspi3_fck: clock-mcspi3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi3_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <20>; + }; + + mcspi2_fck: clock-mcspi2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi2_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <19>; + }; + + mcspi1_fck: clock-mcspi1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi1_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <18>; + }; + + uart2_fck: clock-uart2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart2_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <14>; + }; + + uart1_fck: clock-uart1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart1_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <13>; + }; + + hdq_fck: clock-hdq-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "hdq_fck"; + clocks = <&core_12m_fck>; + ti,bit-shift = <22>; + }; }; gpt10_fck: gpt10_fck { @@ -609,22 +871,6 @@ clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>; }; - gpt11_gate_fck: gpt11_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <12>; - reg = <0x0a00>; - }; - - gpt11_mux_fck: gpt11_mux_fck@a40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <7>; - reg = <0x0a40>; - }; - gpt11_fck: gpt11_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; @@ -639,62 +885,6 @@ clock-div = <1>; }; - mmchs2_fck: mmchs2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <25>; - }; - - mmchs1_fck: mmchs1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <24>; - }; - - i2c3_fck: i2c3_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <17>; - }; - - i2c2_fck: i2c2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <16>; - }; - - i2c1_fck: i2c1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <15>; - }; - - mcbsp5_gate_fck: mcbsp5_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <10>; - reg = <0x0a00>; - }; - - mcbsp1_gate_fck: mcbsp1_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <9>; - reg = <0x0a00>; - }; - core_48m_fck: core_48m_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -703,54 +893,6 @@ clock-div = <1>; }; - mcspi4_fck: mcspi4_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <21>; - }; - - mcspi3_fck: mcspi3_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <20>; - }; - - mcspi2_fck: mcspi2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <19>; - }; - - mcspi1_fck: mcspi1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <18>; - }; - - uart2_fck: uart2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <14>; - }; - - uart1_fck: uart1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <13>; - }; - core_12m_fck: core_12m_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -759,14 +901,6 @@ clock-div = <1>; }; - hdq_fck: hdq_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_12m_fck>; - reg = <0x0a00>; - ti,bit-shift = <22>; - }; - core_l3_ick: core_l3_ick { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -775,12 +909,172 @@ clock-div = <1>; }; - sdrc_ick: sdrc_ick@a10 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <1>; + /* CM_ICLKEN1_CORE */ + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + sdrc_ick: clock-sdrc-ick { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "sdrc_ick"; + clocks = <&core_l3_ick>; + ti,bit-shift = <1>; + }; + + mmchs2_ick: clock-mmchs2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mmchs2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <25>; + }; + + mmchs1_ick: clock-mmchs1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mmchs1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <24>; + }; + + hdq_ick: clock-hdq-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "hdq_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <22>; + }; + + mcspi4_ick: clock-mcspi4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi4_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <21>; + }; + + mcspi3_ick: clock-mcspi3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi3_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <20>; + }; + + mcspi2_ick: clock-mcspi2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <19>; + }; + + mcspi1_ick: clock-mcspi1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <18>; + }; + + i2c3_ick: clock-i2c3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "i2c3_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <17>; + }; + + i2c2_ick: clock-i2c2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "i2c2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <16>; + }; + + i2c1_ick: clock-i2c1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "i2c1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <15>; + }; + + uart2_ick: clock-uart2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <14>; + }; + + uart1_ick: clock-uart1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <13>; + }; + + gpt11_ick: clock-gpt11-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt11_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <12>; + }; + + gpt10_ick: clock-gpt10-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt10_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <11>; + }; + + mcbsp5_ick: clock-mcbsp5-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp5_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <10>; + }; + + mcbsp1_ick: clock-mcbsp1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <9>; + }; + + omapctrl_ick: clock-omapctrl-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "omapctrl_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <6>; + }; + + aes2_ick: clock-aes2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "aes2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <28>; + }; + + sha12_ick: clock-sha12-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "sha12_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <27>; + }; }; gpmc_fck: gpmc_fck { @@ -799,164 +1093,36 @@ clock-div = <1>; }; - mmchs2_ick: mmchs2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <25>; - }; - - mmchs1_ick: mmchs1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <24>; - }; - - hdq_ick: hdq_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <22>; - }; - - mcspi4_ick: mcspi4_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <21>; - }; - - mcspi3_ick: mcspi3_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <20>; - }; - - mcspi2_ick: mcspi2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <19>; - }; - - mcspi1_ick: mcspi1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <18>; - }; - - i2c3_ick: i2c3_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <17>; - }; - - i2c2_ick: i2c2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <16>; - }; - - i2c1_ick: i2c1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <15>; - }; - - uart2_ick: uart2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <14>; - }; - - uart1_ick: uart1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <13>; - }; - - gpt11_ick: gpt11_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <12>; - }; - - gpt10_ick: gpt10_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <11>; - }; - - mcbsp5_ick: mcbsp5_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <10>; - }; - - mcbsp1_ick: mcbsp1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <9>; - }; - - omapctrl_ick: omapctrl_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <6>; - }; - - dss_tv_fck: dss_tv_fck@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&omap_54m_fck>; - reg = <0x0e00>; - ti,bit-shift = <2>; - }; - - dss_96m_fck: dss_96m_fck@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&omap_96m_fck>; - reg = <0x0e00>; - ti,bit-shift = <2>; - }; - - dss2_alwon_fck: dss2_alwon_fck@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_ck>; - reg = <0x0e00>; - ti,bit-shift = <1>; + /* CM_FCLKEN_DSS */ + clock@e00 { + compatible = "ti,clksel"; + reg = <0xe00>; + #clock-cells = <2>; + #address-cells = <0>; + + dss_tv_fck: clock-dss-tv-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss_tv_fck"; + clocks = <&omap_54m_fck>; + ti,bit-shift = <2>; + }; + + dss_96m_fck: clock-dss-96m-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss_96m_fck"; + clocks = <&omap_96m_fck>; + ti,bit-shift = <2>; + }; + + dss2_alwon_fck: clock-dss2-alwon-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss2_alwon_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <1>; + }; }; dummy_ck: dummy_ck { @@ -965,19 +1131,36 @@ clock-frequency = <0>; }; - gpt1_gate_fck: gpt1_gate_fck@c00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <0>; - reg = <0x0c00>; - }; - - gpt1_mux_fck: gpt1_mux_fck@c40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - reg = <0x0c40>; + /* CM_FCLKEN_WKUP */ + clock@c00 { + compatible = "ti,clksel"; + reg = <0xc00>; + #clock-cells = <2>; + #address-cells = <0>; + + gpt1_gate_fck: clock-gpt1-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt1_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <0>; + }; + + gpio1_dbck: clock-gpio1-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio1_dbck"; + clocks = <&wkup_32k_fck>; + ti,bit-shift = <3>; + }; + + wdt2_fck: clock-wdt2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "wdt2_fck"; + clocks = <&wkup_32k_fck>; + ti,bit-shift = <5>; + }; }; gpt1_fck: gpt1_fck { @@ -986,14 +1169,6 @@ clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>; }; - aes2_ick: aes2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - ti,bit-shift = <28>; - reg = <0x0a10>; - }; - wkup_32k_fck: wkup_32k_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -1002,76 +1177,60 @@ clock-div = <1>; }; - gpio1_dbck: gpio1_dbck@c00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&wkup_32k_fck>; - reg = <0x0c00>; - ti,bit-shift = <3>; - }; - - sha12_ick: sha12_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <27>; - }; - - wdt2_fck: wdt2_fck@c00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&wkup_32k_fck>; - reg = <0x0c00>; - ti,bit-shift = <5>; - }; - - wdt2_ick: wdt2_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <5>; - }; - - wdt1_ick: wdt1_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <4>; - }; - - gpio1_ick: gpio1_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <3>; - }; - - omap_32ksync_ick: omap_32ksync_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <2>; - }; - - gpt12_ick: gpt12_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <1>; - }; - - gpt1_ick: gpt1_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <0>; + /* CM_ICLKEN_WKUP */ + clock@c10 { + compatible = "ti,clksel"; + reg = <0xc10>; + #clock-cells = <2>; + #address-cells = <0>; + + wdt2_ick: clock-wdt2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "wdt2_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <5>; + }; + + wdt1_ick: clock-wdt1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "wdt1_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <4>; + }; + + gpio1_ick: clock-gpio1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio1_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <3>; + }; + + omap_32ksync_ick: clock-omap-32ksync-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "omap_32ksync_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <2>; + }; + + gpt12_ick: clock-gpt12-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt12_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <1>; + }; + + gpt1_ick: clock-gpt1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt1_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <0>; + }; }; per_96m_fck: per_96m_fck { @@ -1090,27 +1249,227 @@ clock-div = <1>; }; - uart3_fck: uart3_fck@1000 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&per_48m_fck>; - reg = <0x1000>; - ti,bit-shift = <11>; - }; - - gpt2_gate_fck: gpt2_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <3>; + /* CM_FCLKEN_PER */ + clock@1000 { + compatible = "ti,clksel"; reg = <0x1000>; - }; - - gpt2_mux_fck: gpt2_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; + #clock-cells = <2>; + #address-cells = <0>; + + uart3_fck: clock-uart3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart3_fck"; + clocks = <&per_48m_fck>; + ti,bit-shift = <11>; + }; + + gpt2_gate_fck: clock-gpt2-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt2_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <3>; + }; + + gpt3_gate_fck: clock-gpt3-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt3_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <4>; + }; + + gpt4_gate_fck: clock-gpt4-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt4_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <5>; + }; + + gpt5_gate_fck: clock-gpt5-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt5_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + }; + + gpt6_gate_fck: clock-gpt6-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt6_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <7>; + }; + + gpt7_gate_fck: clock-gpt7-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt7_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <8>; + }; + + gpt8_gate_fck: clock-gpt8-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt8_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <9>; + }; + + gpt9_gate_fck: clock-gpt9-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt9_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <10>; + }; + + gpio6_dbck: clock-gpio6-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio6_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <17>; + }; + + gpio5_dbck: clock-gpio5-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio5_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <16>; + }; + + gpio4_dbck: clock-gpio4-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio4_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <15>; + }; + + gpio3_dbck: clock-gpio3-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio3_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <14>; + }; + + gpio2_dbck: clock-gpio2-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio2_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <13>; + }; + + wdt3_fck: clock-wdt3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "wdt3_fck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <12>; + }; + + mcbsp2_gate_fck: clock-mcbsp2-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp2_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <0>; + }; + + mcbsp3_gate_fck: clock-mcbsp3-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp3_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <1>; + }; + + mcbsp4_gate_fck: clock-mcbsp4-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp4_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <2>; + }; + }; + + /* CM_CLKSEL_PER */ + clock@1040 { + compatible = "ti,clksel"; reg = <0x1040>; + #clock-cells = <2>; + #address-cells = <0>; + + gpt2_mux_fck: clock-gpt2-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt2_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + }; + + gpt3_mux_fck: clock-gpt3-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt3_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <1>; + }; + + gpt4_mux_fck: clock-gpt4-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt4_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <2>; + }; + + gpt5_mux_fck: clock-gpt5-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt5_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <3>; + }; + + gpt6_mux_fck: clock-gpt6-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt6_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <4>; + }; + + gpt7_mux_fck: clock-gpt7-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt7_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <5>; + }; + + gpt8_mux_fck: clock-gpt8-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt8_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <6>; + }; + + gpt9_mux_fck: clock-gpt9-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt9_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <7>; + }; }; gpt2_fck: gpt2_fck { @@ -1119,154 +1478,42 @@ clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>; }; - gpt3_gate_fck: gpt3_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <4>; - reg = <0x1000>; - }; - - gpt3_mux_fck: gpt3_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <1>; - reg = <0x1040>; - }; - gpt3_fck: gpt3_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>; }; - gpt4_gate_fck: gpt4_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <5>; - reg = <0x1000>; - }; - - gpt4_mux_fck: gpt4_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <2>; - reg = <0x1040>; - }; - gpt4_fck: gpt4_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>; }; - gpt5_gate_fck: gpt5_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x1000>; - }; - - gpt5_mux_fck: gpt5_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <3>; - reg = <0x1040>; - }; - gpt5_fck: gpt5_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>; }; - gpt6_gate_fck: gpt6_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <7>; - reg = <0x1000>; - }; - - gpt6_mux_fck: gpt6_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <4>; - reg = <0x1040>; - }; - gpt6_fck: gpt6_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>; }; - gpt7_gate_fck: gpt7_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <8>; - reg = <0x1000>; - }; - - gpt7_mux_fck: gpt7_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <5>; - reg = <0x1040>; - }; - gpt7_fck: gpt7_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>; }; - gpt8_gate_fck: gpt8_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <9>; - reg = <0x1000>; - }; - - gpt8_mux_fck: gpt8_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x1040>; - }; - gpt8_fck: gpt8_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>; }; - gpt9_gate_fck: gpt9_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <10>; - reg = <0x1000>; - }; - - gpt9_mux_fck: gpt9_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <7>; - reg = <0x1040>; - }; - gpt9_fck: gpt9_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; @@ -1281,54 +1528,6 @@ clock-div = <1>; }; - gpio6_dbck: gpio6_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <17>; - }; - - gpio5_dbck: gpio5_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <16>; - }; - - gpio4_dbck: gpio4_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <15>; - }; - - gpio3_dbck: gpio3_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <14>; - }; - - gpio2_dbck: gpio2_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <13>; - }; - - wdt3_fck: wdt3_fck@1000 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <12>; - }; - per_l4_ick: per_l4_ick { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -1337,187 +1536,164 @@ clock-div = <1>; }; - gpio6_ick: gpio6_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <17>; - }; - - gpio5_ick: gpio5_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <16>; - }; - - gpio4_ick: gpio4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <15>; - }; - - gpio3_ick: gpio3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <14>; - }; - - gpio2_ick: gpio2_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <13>; - }; - - wdt3_ick: wdt3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <12>; - }; - - uart3_ick: uart3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <11>; - }; - - uart4_ick: uart4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <18>; - }; - - gpt9_ick: gpt9_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <10>; - }; - - gpt8_ick: gpt8_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <9>; - }; - - gpt7_ick: gpt7_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <8>; - }; - - gpt6_ick: gpt6_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <7>; - }; - - gpt5_ick: gpt5_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <6>; - }; - - gpt4_ick: gpt4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <5>; - }; - - gpt3_ick: gpt3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <4>; - }; - - gpt2_ick: gpt2_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <3>; - }; - - mcbsp2_ick: mcbsp2_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <0>; - }; - - mcbsp3_ick: mcbsp3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <1>; - }; - - mcbsp4_ick: mcbsp4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; + /* CM_ICLKEN_PER */ + clock@1010 { + compatible = "ti,clksel"; reg = <0x1010>; - ti,bit-shift = <2>; - }; - - mcbsp2_gate_fck: mcbsp2_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <0>; - reg = <0x1000>; - }; - - mcbsp3_gate_fck: mcbsp3_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <1>; - reg = <0x1000>; - }; - - mcbsp4_gate_fck: mcbsp4_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <2>; - reg = <0x1000>; - }; - - emu_src_mux_ck: emu_src_mux_ck@1140 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; - reg = <0x1140>; + #clock-cells = <2>; + #address-cells = <0>; + + gpio6_ick: clock-gpio6-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio6_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <17>; + }; + + gpio5_ick: clock-gpio5-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio5_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <16>; + }; + + gpio4_ick: clock-gpio4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <15>; + }; + + gpio3_ick: clock-gpio3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <14>; + }; + + gpio2_ick: clock-gpio2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio2_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <13>; + }; + + wdt3_ick: clock-wdt3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "wdt3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <12>; + }; + + uart3_ick: clock-uart3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <11>; + }; + + uart4_ick: clock-uart4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <18>; + }; + + gpt9_ick: clock-gpt9-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt9_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <10>; + }; + + gpt8_ick: clock-gpt8-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt8_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <9>; + }; + + gpt7_ick: clock-gpt7-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt7_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <8>; + }; + + gpt6_ick: clock-gpt6-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt6_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <7>; + }; + + gpt5_ick: clock-gpt5-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt5_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <6>; + }; + + gpt4_ick: clock-gpt4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <5>; + }; + + gpt3_ick: clock-gpt3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <4>; + }; + + gpt2_ick: clock-gpt2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt2_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <3>; + }; + + mcbsp2_ick: clock-mcbsp2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp2_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <0>; + }; + + mcbsp3_ick: clock-mcbsp3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <1>; + }; + + mcbsp4_ick: clock-mcbsp4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <2>; + }; }; emu_src_ck: emu_src_ck { @@ -1526,54 +1702,6 @@ clocks = <&emu_src_mux_ck>; }; - pclk_fck: pclk_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&emu_src_ck>; - ti,bit-shift = <8>; - ti,max-div = <7>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - - pclkx2_fck: pclkx2_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&emu_src_ck>; - ti,bit-shift = <6>; - ti,max-div = <3>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - - atclk_fck: atclk_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&emu_src_ck>; - ti,bit-shift = <4>; - ti,max-div = <3>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - - traceclk_src_fck: traceclk_src_fck@1140 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; - ti,bit-shift = <2>; - reg = <0x1140>; - }; - - traceclk_fck: traceclk_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&traceclk_src_fck>; - ti,bit-shift = <11>; - ti,max-div = <7>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - secure_32k_fck: secure_32k_fck { #clock-cells = <0>; compatible = "fixed-clock"; diff --git a/dts/src/arm/omap4-panda-common.dtsi b/dts/src/arm/omap4-panda-common.dtsi index 609a8dea94..518652a599 100644 --- a/dts/src/arm/omap4-panda-common.dtsi +++ b/dts/src/arm/omap4-panda-common.dtsi @@ -558,7 +558,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/dts/src/arm/omap443x-clocks.dtsi b/dts/src/arm/omap443x-clocks.dtsi index 39297868ec..581e088231 100644 --- a/dts/src/arm/omap443x-clocks.dtsi +++ b/dts/src/arm/omap443x-clocks.dtsi @@ -8,6 +8,7 @@ bandgap_fclk: bandgap_fclk@1888 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "bandgap_fclk"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x1888>; diff --git a/dts/src/arm/omap446x-clocks.dtsi b/dts/src/arm/omap446x-clocks.dtsi index 0f41714cff..d9362fef67 100644 --- a/dts/src/arm/omap446x-clocks.dtsi +++ b/dts/src/arm/omap446x-clocks.dtsi @@ -8,6 +8,7 @@ div_ts_ck: div_ts_ck@1888 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_ts_ck"; clocks = <&l4_wkup_clk_mux_ck>; ti,bit-shift = <24>; reg = <0x1888>; @@ -17,6 +18,7 @@ bandgap_ts_fclk: bandgap_ts_fclk@1888 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "bandgap_ts_fclk"; clocks = <&div_ts_ck>; ti,bit-shift = <8>; reg = <0x1888>; diff --git a/dts/src/arm/omap44xx-clocks.dtsi b/dts/src/arm/omap44xx-clocks.dtsi index 1f1c04d8f4..8df73d2856 100644 --- a/dts/src/arm/omap44xx-clocks.dtsi +++ b/dts/src/arm/omap44xx-clocks.dtsi @@ -8,18 +8,21 @@ extalt_clkin_ck: extalt_clkin_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "extalt_clkin_ck"; clock-frequency = <59000000>; }; pad_clks_src_ck: pad_clks_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pad_clks_src_ck"; clock-frequency = <12000000>; }; pad_clks_ck: pad_clks_ck@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "pad_clks_ck"; clocks = <&pad_clks_src_ck>; ti,bit-shift = <8>; reg = <0x0108>; @@ -28,24 +31,28 @@ pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pad_slimbus_core_clks_ck"; clock-frequency = <12000000>; }; secure_32k_clk_src_ck: secure_32k_clk_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "secure_32k_clk_src_ck"; clock-frequency = <32768>; }; slimbus_src_clk: slimbus_src_clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "slimbus_src_clk"; clock-frequency = <12000000>; }; slimbus_clk: slimbus_clk@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "slimbus_clk"; clocks = <&slimbus_src_clk>; ti,bit-shift = <10>; reg = <0x0108>; @@ -54,84 +61,98 @@ sys_32k_ck: sys_32k_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_32k_ck"; clock-frequency = <32768>; }; virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_12000000_ck"; clock-frequency = <12000000>; }; virt_13000000_ck: virt_13000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_13000000_ck"; clock-frequency = <13000000>; }; virt_16800000_ck: virt_16800000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_16800000_ck"; clock-frequency = <16800000>; }; virt_19200000_ck: virt_19200000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; virt_26000000_ck: virt_26000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; virt_27000000_ck: virt_27000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_27000000_ck"; clock-frequency = <27000000>; }; virt_38400000_ck: virt_38400000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_38400000_ck"; clock-frequency = <38400000>; }; tie_low_clock_ck: tie_low_clock_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "tie_low_clock_ck"; clock-frequency = <0>; }; utmi_phy_clkout_ck: utmi_phy_clkout_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "utmi_phy_clkout_ck"; clock-frequency = <60000000>; }; xclk60mhsp1_ck: xclk60mhsp1_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp1_ck"; clock-frequency = <60000000>; }; xclk60mhsp2_ck: xclk60mhsp2_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp2_ck"; clock-frequency = <60000000>; }; xclk60motg_ck: xclk60motg_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60motg_ck"; clock-frequency = <60000000>; }; dpll_abe_ck: dpll_abe_ck@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; + clock-output-names = "dpll_abe_ck"; clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>; reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; }; @@ -139,6 +160,7 @@ dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_abe_x2_ck"; clocks = <&dpll_abe_ck>; reg = <0x01f0>; }; @@ -146,6 +168,7 @@ dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -157,6 +180,7 @@ abe_24m_fclk: abe_24m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "abe_24m_fclk"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <8>; @@ -165,6 +189,7 @@ abe_clk: abe_clk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_clk"; clocks = <&dpll_abe_m2x2_ck>; ti,max-div = <4>; reg = <0x0108>; @@ -175,6 +200,7 @@ dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m3x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -186,6 +212,7 @@ core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "core_hsd_byp_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x012c>; @@ -194,6 +221,7 @@ dpll_core_ck: dpll_core_ck@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -201,12 +229,14 @@ dpll_core_x2_ck: dpll_core_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m6x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -218,6 +248,7 @@ dpll_core_m2_ck: dpll_core_m2_ck@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m2_ck"; clocks = <&dpll_core_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -229,6 +260,7 @@ ddrphy_ck: ddrphy_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "ddrphy_ck"; clocks = <&dpll_core_m2_ck>; clock-mult = <1>; clock-div = <2>; @@ -237,6 +269,7 @@ dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m5x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -248,6 +281,7 @@ div_core_ck: div_core_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_core_ck"; clocks = <&dpll_core_m5x2_ck>; reg = <0x0100>; ti,max-div = <2>; @@ -256,6 +290,7 @@ div_iva_hs_clk: div_iva_hs_clk@1dc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_iva_hs_clk"; clocks = <&dpll_core_m5x2_ck>; ti,max-div = <4>; reg = <0x01dc>; @@ -265,6 +300,7 @@ div_mpu_hs_clk: div_mpu_hs_clk@19c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_mpu_hs_clk"; clocks = <&dpll_core_m5x2_ck>; ti,max-div = <4>; reg = <0x019c>; @@ -274,6 +310,7 @@ dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m4x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -285,6 +322,7 @@ dll_clk_div_ck: dll_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dll_clk_div_ck"; clocks = <&dpll_core_m4x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -293,6 +331,7 @@ dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2_ck"; clocks = <&dpll_abe_ck>; ti,max-div = <31>; reg = <0x01f0>; @@ -302,6 +341,7 @@ dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "dpll_core_m3x2_gate_ck"; clocks = <&dpll_core_x2_ck>; ti,bit-shift = <8>; reg = <0x0134>; @@ -310,6 +350,7 @@ dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; + clock-output-names = "dpll_core_m3x2_div_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0134>; @@ -319,12 +360,14 @@ dpll_core_m3x2_ck: dpll_core_m3x2_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "dpll_core_m3x2_ck"; clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>; }; dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m7x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -336,6 +379,7 @@ iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "iva_hsd_byp_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>; ti,bit-shift = <23>; reg = <0x01ac>; @@ -344,6 +388,7 @@ dpll_iva_ck: dpll_iva_ck@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_iva_ck"; clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; assigned-clocks = <&dpll_iva_ck>; @@ -353,12 +398,14 @@ dpll_iva_x2_ck: dpll_iva_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_iva_x2_ck"; clocks = <&dpll_iva_ck>; }; dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_m4x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -372,6 +419,7 @@ dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_m5x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -385,6 +433,7 @@ dpll_mpu_ck: dpll_mpu_ck@160 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; @@ -392,6 +441,7 @@ dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -403,6 +453,7 @@ per_hs_clk_div_ck: per_hs_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_hs_clk_div_ck"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -411,6 +462,7 @@ usb_hs_clk_div_ck: usb_hs_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "usb_hs_clk_div_ck"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <3>; @@ -419,6 +471,7 @@ l3_div_ck: l3_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3_div_ck"; clocks = <&div_core_ck>; ti,bit-shift = <4>; ti,max-div = <2>; @@ -428,6 +481,7 @@ l4_div_ck: l4_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l4_div_ck"; clocks = <&l3_div_ck>; ti,bit-shift = <8>; ti,max-div = <2>; @@ -437,6 +491,7 @@ lp_clk_div_ck: lp_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "lp_clk_div_ck"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -445,6 +500,7 @@ mpu_periphclk: mpu_periphclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_periphclk"; clocks = <&dpll_mpu_ck>; clock-mult = <1>; clock-div = <2>; @@ -453,6 +509,7 @@ ocp_abe_iclk: ocp_abe_iclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "ocp_abe_iclk"; clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>; ti,bit-shift = <24>; reg = <0x0528>; @@ -462,6 +519,7 @@ per_abe_24m_fclk: per_abe_24m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_abe_24m_fclk"; clocks = <&dpll_abe_m2_ck>; clock-mult = <1>; clock-div = <4>; @@ -470,6 +528,7 @@ dummy_ck: dummy_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "dummy_ck"; clock-frequency = <0>; }; }; @@ -478,6 +537,7 @@ sys_clkin_ck: sys_clkin_ck@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin_ck"; clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; reg = <0x0110>; ti,index-starts-at-one; @@ -486,6 +546,7 @@ abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_bypass_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; ti,bit-shift = <24>; reg = <0x0108>; @@ -494,6 +555,7 @@ abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_refclk_mux_ck"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; reg = <0x010c>; }; @@ -501,6 +563,7 @@ dbgclk_mux_ck: dbgclk_mux_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dbgclk_mux_ck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; @@ -509,6 +572,7 @@ l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "l4_wkup_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>; reg = <0x0108>; }; @@ -516,6 +580,7 @@ syc_clk_div_ck: syc_clk_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "syc_clk_div_ck"; clocks = <&sys_clkin_ck>; reg = <0x0100>; ti,max-div = <2>; @@ -524,6 +589,7 @@ usim_ck: usim_ck@1858 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "usim_ck"; clocks = <&dpll_per_m4x2_ck>; ti,bit-shift = <24>; reg = <0x1858>; @@ -533,6 +599,7 @@ usim_fclk: usim_fclk@1858 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usim_fclk"; clocks = <&usim_ck>; ti,bit-shift = <8>; reg = <0x1858>; @@ -541,6 +608,7 @@ trace_clk_div_ck: trace_clk_div_ck { #clock-cells = <0>; compatible = "ti,clkdm-gate-clock"; + clock-output-names = "trace_clk_div_ck"; clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>; }; }; @@ -548,6 +616,7 @@ &prm_clockdomains { emu_sys_clkdm: emu_sys_clkdm { compatible = "ti,clockdomain"; + clock-output-names = "emu_sys_clkdm"; clocks = <&trace_clk_div_ck>; }; }; @@ -556,6 +625,7 @@ per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "per_hsd_byp_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>; ti,bit-shift = <23>; reg = <0x014c>; @@ -564,6 +634,7 @@ dpll_per_ck: dpll_per_ck@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -571,6 +642,7 @@ dpll_per_m2_ck: dpll_per_m2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; reg = <0x0150>; @@ -580,6 +652,7 @@ dpll_per_x2_ck: dpll_per_x2_ck@150 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_per_x2_ck"; clocks = <&dpll_per_ck>; reg = <0x0150>; }; @@ -587,6 +660,7 @@ dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -598,6 +672,7 @@ dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "dpll_per_m3x2_gate_ck"; clocks = <&dpll_per_x2_ck>; ti,bit-shift = <8>; reg = <0x0154>; @@ -606,6 +681,7 @@ dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; + clock-output-names = "dpll_per_m3x2_div_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; reg = <0x0154>; @@ -615,12 +691,14 @@ dpll_per_m3x2_ck: dpll_per_m3x2_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "dpll_per_m3x2_ck"; clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>; }; dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m4x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -632,6 +710,7 @@ dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m5x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -643,6 +722,7 @@ dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m6x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -654,6 +734,7 @@ dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m7x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -665,6 +746,7 @@ dpll_usb_ck: dpll_usb_ck@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; + clock-output-names = "dpll_usb_ck"; clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; @@ -672,6 +754,7 @@ dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; + clock-output-names = "dpll_usb_clkdcoldo_ck"; clocks = <&dpll_usb_ck>; ti,clock-div = <1>; ti,autoidle-shift = <8>; @@ -683,6 +766,7 @@ dpll_usb_m2_ck: dpll_usb_m2_ck@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_usb_m2_ck"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -694,6 +778,7 @@ ducati_clk_mux_ck: ducati_clk_mux_ck@100 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "ducati_clk_mux_ck"; clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>; reg = <0x0100>; }; @@ -701,6 +786,7 @@ func_12m_fclk: func_12m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -709,6 +795,7 @@ func_24m_clk: func_24m_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; @@ -717,6 +804,7 @@ func_24mc_fclk: func_24mc_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24mc_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <8>; @@ -725,6 +813,7 @@ func_48m_fclk: func_48m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "func_48m_fclk"; clocks = <&dpll_per_m2x2_ck>; reg = <0x0108>; ti,dividers = <4>, <8>; @@ -733,6 +822,7 @@ func_48mc_fclk: func_48mc_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_48mc_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <4>; @@ -741,6 +831,7 @@ func_64m_fclk: func_64m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "func_64m_fclk"; clocks = <&dpll_per_m4x2_ck>; reg = <0x0108>; ti,dividers = <2>, <4>; @@ -749,6 +840,7 @@ func_96m_fclk: func_96m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "func_96m_fclk"; clocks = <&dpll_per_m2x2_ck>; reg = <0x0108>; ti,dividers = <2>, <4>; @@ -757,6 +849,7 @@ init_60m_fclk: init_60m_fclk@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "init_60m_fclk"; clocks = <&dpll_usb_m2_ck>; reg = <0x0104>; ti,dividers = <1>, <8>; @@ -765,6 +858,7 @@ per_abe_nc_fclk: per_abe_nc_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "per_abe_nc_fclk"; clocks = <&dpll_abe_m2_ck>; reg = <0x0108>; ti,max-div = <2>; @@ -773,6 +867,7 @@ usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy_cm_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0640>; @@ -782,6 +877,7 @@ &cm2_clockdomains { l3_init_clkdm: l3_init_clkdm { compatible = "ti,clockdomain"; + clock-output-names = "l3_init_clkdm"; clocks = <&dpll_usb_ck>; }; }; @@ -790,6 +886,7 @@ auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk0_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0310>; @@ -798,6 +895,7 @@ auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk0_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0310>; @@ -806,12 +904,14 @@ auxclk0_src_ck: auxclk0_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk0_src_ck"; clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>; }; auxclk0_ck: auxclk0_ck@310 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk0_ck"; clocks = <&auxclk0_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -821,6 +921,7 @@ auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk1_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0314>; @@ -829,6 +930,7 @@ auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk1_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0314>; @@ -837,12 +939,14 @@ auxclk1_src_ck: auxclk1_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk1_src_ck"; clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>; }; auxclk1_ck: auxclk1_ck@314 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk1_ck"; clocks = <&auxclk1_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -852,6 +956,7 @@ auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk2_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0318>; @@ -860,6 +965,7 @@ auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk2_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0318>; @@ -868,12 +974,14 @@ auxclk2_src_ck: auxclk2_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk2_src_ck"; clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>; }; auxclk2_ck: auxclk2_ck@318 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk2_ck"; clocks = <&auxclk2_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -883,6 +991,7 @@ auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk3_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x031c>; @@ -891,6 +1000,7 @@ auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk3_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x031c>; @@ -899,12 +1009,14 @@ auxclk3_src_ck: auxclk3_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk3_src_ck"; clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>; }; auxclk3_ck: auxclk3_ck@31c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk3_ck"; clocks = <&auxclk3_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -914,6 +1026,7 @@ auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk4_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0320>; @@ -922,6 +1035,7 @@ auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk4_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0320>; @@ -930,12 +1044,14 @@ auxclk4_src_ck: auxclk4_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk4_src_ck"; clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>; }; auxclk4_ck: auxclk4_ck@320 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk4_ck"; clocks = <&auxclk4_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -945,6 +1061,7 @@ auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk5_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0324>; @@ -953,6 +1070,7 @@ auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk5_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0324>; @@ -961,12 +1079,14 @@ auxclk5_src_ck: auxclk5_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk5_src_ck"; clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>; }; auxclk5_ck: auxclk5_ck@324 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk5_ck"; clocks = <&auxclk5_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -976,6 +1096,7 @@ auxclkreq0_ck: auxclkreq0_ck@210 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq0_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0210>; @@ -984,6 +1105,7 @@ auxclkreq1_ck: auxclkreq1_ck@214 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq1_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0214>; @@ -992,6 +1114,7 @@ auxclkreq2_ck: auxclkreq2_ck@218 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq2_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0218>; @@ -1000,6 +1123,7 @@ auxclkreq3_ck: auxclkreq3_ck@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq3_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x021c>; @@ -1008,6 +1132,7 @@ auxclkreq4_ck: auxclkreq4_ck@220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq4_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0220>; @@ -1016,6 +1141,7 @@ auxclkreq5_ck: auxclkreq5_ck@224 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq5_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0224>; @@ -1025,6 +1151,7 @@ &cm1 { mpuss_cm: mpuss_cm@300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpuss_cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1032,6 +1159,7 @@ mpuss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpuss_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1039,6 +1167,7 @@ tesla_cm: tesla_cm@400 { compatible = "ti,omap4-cm"; + clock-output-names = "tesla_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1046,6 +1175,7 @@ tesla_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "tesla_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1053,6 +1183,7 @@ abe_cm: abe_cm@500 { compatible = "ti,omap4-cm"; + clock-output-names = "abe_cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1060,6 +1191,7 @@ abe_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "abe_clkctrl"; reg = <0x20 0x6c>; #clock-cells = <2>; }; @@ -1070,6 +1202,7 @@ &cm2 { l4_ao_cm: l4_ao_cm@600 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_ao_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1077,6 +1210,7 @@ l4_ao_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_ao_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; @@ -1084,6 +1218,7 @@ l3_1_cm: l3_1_cm@700 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_1_cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1091,6 +1226,7 @@ l3_1_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1098,6 +1234,7 @@ l3_2_cm: l3_2_cm@800 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_2_cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1105,6 +1242,7 @@ l3_2_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_2_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; @@ -1112,6 +1250,7 @@ ducati_cm: ducati_cm@900 { compatible = "ti,omap4-cm"; + clock-output-names = "ducati_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1119,6 +1258,7 @@ ducati_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "ducati_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1126,6 +1266,7 @@ l3_dma_cm: l3_dma_cm@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_dma_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1133,6 +1274,7 @@ l3_dma_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_dma_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1140,6 +1282,7 @@ l3_emif_cm: l3_emif_cm@b00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_emif_cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1147,6 +1290,7 @@ l3_emif_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_emif_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; @@ -1154,6 +1298,7 @@ d2d_cm: d2d_cm@c00 { compatible = "ti,omap4-cm"; + clock-output-names = "d2d_cm"; reg = <0xc00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1161,6 +1306,7 @@ d2d_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "d2d_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1168,6 +1314,7 @@ l4_cfg_cm: l4_cfg_cm@d00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_cfg_cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1175,6 +1322,7 @@ l4_cfg_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_cfg_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; @@ -1182,6 +1330,7 @@ l3_instr_cm: l3_instr_cm@e00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_instr_cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1189,6 +1338,7 @@ l3_instr_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_instr_clkctrl"; reg = <0x20 0x24>; #clock-cells = <2>; }; @@ -1196,6 +1346,7 @@ ivahd_cm: ivahd_cm@f00 { compatible = "ti,omap4-cm"; + clock-output-names = "ivahd_cm"; reg = <0xf00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1203,6 +1354,7 @@ ivahd_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "ivahd_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; @@ -1210,6 +1362,7 @@ iss_cm: iss_cm@1000 { compatible = "ti,omap4-cm"; + clock-output-names = "iss_cm"; reg = <0x1000 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1217,6 +1370,7 @@ iss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "iss_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; @@ -1224,6 +1378,7 @@ l3_dss_cm: l3_dss_cm@1100 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_dss_cm"; reg = <0x1100 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1231,6 +1386,7 @@ l3_dss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_dss_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1238,6 +1394,7 @@ l3_gfx_cm: l3_gfx_cm@1200 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_gfx_cm"; reg = <0x1200 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1245,6 +1402,7 @@ l3_gfx_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_gfx_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1252,6 +1410,7 @@ l3_init_cm: l3_init_cm@1300 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_init_cm"; reg = <0x1300 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1259,26 +1418,30 @@ l3_init_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_init_clkctrl"; reg = <0x20 0xc4>; #clock-cells = <2>; }; }; - l4_per_cm: l4_per_cm@1400 { + l4_per_cm: clock@1400 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_per_cm"; reg = <0x1400 0x200>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1400 0x200>; l4_per_clkctrl: clock@20 { - compatible = "ti,clkctrl-l4-per", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4_per_clkctrl"; reg = <0x20 0x144>; #clock-cells = <2>; }; l4_secure_clkctrl: clock@1a0 { - compatible = "ti,clkctrl-l4-secure", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4_secure_clkctrl"; reg = <0x1a0 0x3c>; #clock-cells = <2>; }; @@ -1288,6 +1451,7 @@ &prm { l4_wkup_cm: l4_wkup_cm@1800 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_wkup_cm"; reg = <0x1800 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1295,6 +1459,7 @@ l4_wkup_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_clkctrl"; reg = <0x20 0x5c>; #clock-cells = <2>; }; @@ -1302,6 +1467,7 @@ emu_sys_cm: emu_sys_cm@1a00 { compatible = "ti,omap4-cm"; + clock-output-names = "emu_sys_cm"; reg = <0x1a00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1309,6 +1475,7 @@ emu_sys_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "emu_sys_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; diff --git a/dts/src/arm/omap5-igep0050.dts b/dts/src/arm/omap5-igep0050.dts index 76e499d89d..3851120857 100644 --- a/dts/src/arm/omap5-igep0050.dts +++ b/dts/src/arm/omap5-igep0050.dts @@ -128,7 +128,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@3 { + ethernet: ethernet@3 { compatible = "usb424,7500"; reg = <3>; }; diff --git a/dts/src/arm/omap5-uevm.dts b/dts/src/arm/omap5-uevm.dts index 51d5fcae50..453da9f18a 100644 --- a/dts/src/arm/omap5-uevm.dts +++ b/dts/src/arm/omap5-uevm.dts @@ -209,7 +209,7 @@ #size-cells = <0>; }; - ethernet: usbether@3 { + ethernet: ethernet@3 { compatible = "usb424,9730"; reg = <3>; }; diff --git a/dts/src/arm/omap54xx-clocks.dtsi b/dts/src/arm/omap54xx-clocks.dtsi index 42f2c44772..5cf3b0e78c 100644 --- a/dts/src/arm/omap54xx-clocks.dtsi +++ b/dts/src/arm/omap54xx-clocks.dtsi @@ -8,12 +8,14 @@ pad_clks_src_ck: pad_clks_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pad_clks_src_ck"; clock-frequency = <12000000>; }; pad_clks_ck: pad_clks_ck@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "pad_clks_ck"; clocks = <&pad_clks_src_ck>; ti,bit-shift = <8>; reg = <0x0108>; @@ -22,18 +24,21 @@ secure_32k_clk_src_ck: secure_32k_clk_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "secure_32k_clk_src_ck"; clock-frequency = <32768>; }; slimbus_src_clk: slimbus_src_clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "slimbus_src_clk"; clock-frequency = <12000000>; }; slimbus_clk: slimbus_clk@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "slimbus_clk"; clocks = <&slimbus_src_clk>; ti,bit-shift = <10>; reg = <0x0108>; @@ -42,66 +47,77 @@ sys_32k_ck: sys_32k_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_32k_ck"; clock-frequency = <32768>; }; virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_12000000_ck"; clock-frequency = <12000000>; }; virt_13000000_ck: virt_13000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_13000000_ck"; clock-frequency = <13000000>; }; virt_16800000_ck: virt_16800000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_16800000_ck"; clock-frequency = <16800000>; }; virt_19200000_ck: virt_19200000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; virt_26000000_ck: virt_26000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; virt_27000000_ck: virt_27000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_27000000_ck"; clock-frequency = <27000000>; }; virt_38400000_ck: virt_38400000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_38400000_ck"; clock-frequency = <38400000>; }; xclk60mhsp1_ck: xclk60mhsp1_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp1_ck"; clock-frequency = <60000000>; }; xclk60mhsp2_ck: xclk60mhsp2_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp2_ck"; clock-frequency = <60000000>; }; dpll_abe_ck: dpll_abe_ck@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; + clock-output-names = "dpll_abe_ck"; clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; }; @@ -109,12 +125,14 @@ dpll_abe_x2_ck: dpll_abe_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_abe_x2_ck"; clocks = <&dpll_abe_ck>; }; dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; reg = <0x01f0>; @@ -124,6 +142,7 @@ abe_24m_fclk: abe_24m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "abe_24m_fclk"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <8>; @@ -132,6 +151,7 @@ abe_clk: abe_clk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_clk"; clocks = <&dpll_abe_m2x2_ck>; ti,max-div = <4>; reg = <0x0108>; @@ -141,6 +161,7 @@ abe_iclk: abe_iclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_iclk"; clocks = <&aess_fclk>; ti,bit-shift = <24>; reg = <0x0528>; @@ -150,6 +171,7 @@ abe_lp_clk_div: abe_lp_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "abe_lp_clk_div"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -158,6 +180,7 @@ dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m3x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; reg = <0x01f4>; @@ -167,6 +190,7 @@ dpll_core_byp_mux: dpll_core_byp_mux@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_core_byp_mux"; clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x012c>; @@ -175,6 +199,7 @@ dpll_core_ck: dpll_core_ck@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -182,12 +207,14 @@ dpll_core_x2_ck: dpll_core_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h21x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0150>; @@ -197,6 +224,7 @@ c2c_fclk: c2c_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "c2c_fclk"; clocks = <&dpll_core_h21x2_ck>; clock-mult = <1>; clock-div = <1>; @@ -205,6 +233,7 @@ c2c_iclk: c2c_iclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "c2c_iclk"; clocks = <&c2c_fclk>; clock-mult = <1>; clock-div = <2>; @@ -213,6 +242,7 @@ dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h11x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0138>; @@ -222,6 +252,7 @@ dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h12x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x013c>; @@ -231,6 +262,7 @@ dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h13x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0140>; @@ -240,6 +272,7 @@ dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h14x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0144>; @@ -249,6 +282,7 @@ dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h22x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0154>; @@ -258,6 +292,7 @@ dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h23x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0158>; @@ -267,6 +302,7 @@ dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h24x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x015c>; @@ -276,6 +312,7 @@ dpll_core_m2_ck: dpll_core_m2_ck@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m2_ck"; clocks = <&dpll_core_ck>; ti,max-div = <31>; reg = <0x0130>; @@ -285,6 +322,7 @@ dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m3x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0134>; @@ -294,6 +332,7 @@ iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "iva_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; @@ -302,6 +341,7 @@ dpll_iva_byp_mux: dpll_iva_byp_mux@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_iva_byp_mux"; clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x01ac>; @@ -310,6 +350,7 @@ dpll_iva_ck: dpll_iva_ck@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_iva_ck"; clocks = <&sys_clkin>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; assigned-clocks = <&dpll_iva_ck>; @@ -319,12 +360,14 @@ dpll_iva_x2_ck: dpll_iva_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_iva_x2_ck"; clocks = <&dpll_iva_ck>; }; dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_h11x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; reg = <0x01b8>; @@ -336,6 +379,7 @@ dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_h12x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; reg = <0x01bc>; @@ -347,6 +391,7 @@ mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; @@ -355,6 +400,7 @@ dpll_mpu_ck: dpll_mpu_ck@160 { #clock-cells = <0>; compatible = "ti,omap5-mpu-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; @@ -362,6 +408,7 @@ dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; reg = <0x0170>; @@ -371,6 +418,7 @@ per_dpll_hs_clk_div: per_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -379,6 +427,7 @@ usb_dpll_hs_clk_div: usb_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "usb_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <3>; @@ -387,6 +436,7 @@ l3_iclk_div: l3_iclk_div@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3_iclk_div"; ti,max-div = <2>; ti,bit-shift = <4>; reg = <0x100>; @@ -397,6 +447,7 @@ gpu_l3_iclk: gpu_l3_iclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "gpu_l3_iclk"; clocks = <&l3_iclk_div>; clock-mult = <1>; clock-div = <1>; @@ -405,6 +456,7 @@ l4_root_clk_div: l4_root_clk_div@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l4_root_clk_div"; ti,max-div = <2>; ti,bit-shift = <8>; reg = <0x100>; @@ -415,6 +467,7 @@ slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "slimbus1_slimbus_clk"; clocks = <&slimbus_clk>; ti,bit-shift = <11>; reg = <0x0560>; @@ -423,6 +476,7 @@ aess_fclk: aess_fclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "aess_fclk"; clocks = <&abe_clk>; ti,bit-shift = <24>; ti,max-div = <2>; @@ -432,6 +486,7 @@ mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "mcasp_sync_mux_ck"; clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; ti,bit-shift = <26>; reg = <0x0540>; @@ -440,6 +495,7 @@ mcasp_gfclk: mcasp_gfclk@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "mcasp_gfclk"; clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ti,bit-shift = <24>; reg = <0x0540>; @@ -448,6 +504,7 @@ dummy_ck: dummy_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "dummy_ck"; clock-frequency = <0>; }; }; @@ -455,6 +512,7 @@ sys_clkin: sys_clkin@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin"; clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; reg = <0x0110>; ti,index-starts-at-one; @@ -463,6 +521,7 @@ abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_bypass_clk_mux"; clocks = <&sys_clkin>, <&sys_32k_ck>; reg = <0x0108>; }; @@ -470,6 +529,7 @@ abe_dpll_clk_mux: abe_dpll_clk_mux@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_clk_mux"; clocks = <&sys_clkin>, <&sys_32k_ck>; reg = <0x010c>; }; @@ -477,6 +537,7 @@ custefuse_sys_gfclk_div: custefuse_sys_gfclk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "custefuse_sys_gfclk_div"; clocks = <&sys_clkin>; clock-mult = <1>; clock-div = <2>; @@ -485,6 +546,7 @@ dss_syc_gfclk_div: dss_syc_gfclk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dss_syc_gfclk_div"; clocks = <&sys_clkin>; clock-mult = <1>; clock-div = <1>; @@ -493,6 +555,7 @@ wkupaon_iclk_mux: wkupaon_iclk_mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wkupaon_iclk_mux"; clocks = <&sys_clkin>, <&abe_lp_clk_div>; reg = <0x0108>; }; @@ -500,6 +563,7 @@ l3instr_ts_gclk_div: l3instr_ts_gclk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3instr_ts_gclk_div"; clocks = <&wkupaon_iclk_mux>; clock-mult = <1>; clock-div = <1>; @@ -511,6 +575,7 @@ dpll_per_byp_mux: dpll_per_byp_mux@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_per_byp_mux"; clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x014c>; @@ -519,6 +584,7 @@ dpll_per_ck: dpll_per_ck@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -526,12 +592,14 @@ dpll_per_x2_ck: dpll_per_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_per_x2_ck"; clocks = <&dpll_per_ck>; }; dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h11x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; reg = <0x0158>; @@ -541,6 +609,7 @@ dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h12x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; reg = <0x015c>; @@ -550,6 +619,7 @@ dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h14x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; reg = <0x0164>; @@ -559,6 +629,7 @@ dpll_per_m2_ck: dpll_per_m2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; reg = <0x0150>; @@ -568,6 +639,7 @@ dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; reg = <0x0150>; @@ -577,6 +649,7 @@ dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m3x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; reg = <0x0154>; @@ -586,6 +659,7 @@ dpll_unipro1_ck: dpll_unipro1_ck@200 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_unipro1_ck"; clocks = <&sys_clkin>, <&sys_clkin>; reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>; }; @@ -593,6 +667,7 @@ dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_unipro1_clkdcoldo"; clocks = <&dpll_unipro1_ck>; clock-mult = <1>; clock-div = <1>; @@ -601,6 +676,7 @@ dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_unipro1_m2_ck"; clocks = <&dpll_unipro1_ck>; ti,max-div = <127>; reg = <0x0210>; @@ -610,6 +686,7 @@ dpll_unipro2_ck: dpll_unipro2_ck@1c0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_unipro2_ck"; clocks = <&sys_clkin>, <&sys_clkin>; reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>; }; @@ -617,6 +694,7 @@ dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_unipro2_clkdcoldo"; clocks = <&dpll_unipro2_ck>; clock-mult = <1>; clock-div = <1>; @@ -625,6 +703,7 @@ dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_unipro2_m2_ck"; clocks = <&dpll_unipro2_ck>; ti,max-div = <127>; reg = <0x01d0>; @@ -634,6 +713,7 @@ dpll_usb_byp_mux: dpll_usb_byp_mux@18c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_usb_byp_mux"; clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x018c>; @@ -642,6 +722,7 @@ dpll_usb_ck: dpll_usb_ck@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; + clock-output-names = "dpll_usb_ck"; clocks = <&sys_clkin>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; @@ -649,6 +730,7 @@ dpll_usb_clkdcoldo: dpll_usb_clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_usb_clkdcoldo"; clocks = <&dpll_usb_ck>; clock-mult = <1>; clock-div = <1>; @@ -657,6 +739,7 @@ dpll_usb_m2_ck: dpll_usb_m2_ck@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_usb_m2_ck"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; reg = <0x0190>; @@ -666,6 +749,7 @@ func_128m_clk: func_128m_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_128m_clk"; clocks = <&dpll_per_h11x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -674,6 +758,7 @@ func_12m_fclk: func_12m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -682,6 +767,7 @@ func_24m_clk: func_24m_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; @@ -690,6 +776,7 @@ func_48m_fclk: func_48m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_48m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <4>; @@ -698,6 +785,7 @@ func_96m_fclk: func_96m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_96m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -706,6 +794,7 @@ l3init_60m_fclk: l3init_60m_fclk@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3init_60m_fclk"; clocks = <&dpll_usb_m2_ck>; reg = <0x0104>; ti,dividers = <1>, <8>; @@ -714,6 +803,7 @@ iss_ctrlclk: iss_ctrlclk@1320 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "iss_ctrlclk"; clocks = <&func_96m_fclk>; ti,bit-shift = <8>; reg = <0x1320>; @@ -722,6 +812,7 @@ lli_txphy_clk: lli_txphy_clk@f20 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "lli_txphy_clk"; clocks = <&dpll_unipro1_clkdcoldo>; ti,bit-shift = <8>; reg = <0x0f20>; @@ -730,6 +821,7 @@ lli_txphy_ls_clk: lli_txphy_ls_clk@f20 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "lli_txphy_ls_clk"; clocks = <&dpll_unipro1_m2_ck>; ti,bit-shift = <9>; reg = <0x0f20>; @@ -738,6 +830,7 @@ usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy_cm_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0640>; @@ -746,6 +839,7 @@ fdif_fclk: fdif_fclk@1328 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "fdif_fclk"; clocks = <&dpll_per_h11x2_ck>; ti,bit-shift = <24>; ti,max-div = <2>; @@ -755,6 +849,7 @@ gpu_core_gclk_mux: gpu_core_gclk_mux@1520 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_core_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; ti,bit-shift = <24>; reg = <0x1520>; @@ -763,6 +858,7 @@ gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_hyd_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; ti,bit-shift = <25>; reg = <0x1520>; @@ -771,6 +867,7 @@ hsi_fclk: hsi_fclk@1638 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "hsi_fclk"; clocks = <&dpll_per_m2x2_ck>; ti,bit-shift = <24>; ti,max-div = <2>; @@ -781,6 +878,7 @@ &cm_core_clockdomains { l3init_clkdm: l3init_clkdm { compatible = "ti,clockdomain"; + clock-output-names = "l3init_clkdm"; clocks = <&dpll_usb_ck>; }; }; @@ -789,6 +887,7 @@ auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk0_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0310>; @@ -797,6 +896,7 @@ auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk0_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0310>; @@ -805,12 +905,14 @@ auxclk0_src_ck: auxclk0_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk0_src_ck"; clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>; }; auxclk0_ck: auxclk0_ck@310 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk0_ck"; clocks = <&auxclk0_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -820,6 +922,7 @@ auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk1_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0314>; @@ -828,6 +931,7 @@ auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk1_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0314>; @@ -836,12 +940,14 @@ auxclk1_src_ck: auxclk1_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk1_src_ck"; clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>; }; auxclk1_ck: auxclk1_ck@314 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk1_ck"; clocks = <&auxclk1_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -851,6 +957,7 @@ auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk2_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0318>; @@ -859,6 +966,7 @@ auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk2_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0318>; @@ -867,12 +975,14 @@ auxclk2_src_ck: auxclk2_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk2_src_ck"; clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>; }; auxclk2_ck: auxclk2_ck@318 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk2_ck"; clocks = <&auxclk2_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -882,6 +992,7 @@ auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk3_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x031c>; @@ -890,6 +1001,7 @@ auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk3_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x031c>; @@ -898,12 +1010,14 @@ auxclk3_src_ck: auxclk3_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk3_src_ck"; clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>; }; auxclk3_ck: auxclk3_ck@31c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk3_ck"; clocks = <&auxclk3_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -913,6 +1027,7 @@ auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk4_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0320>; @@ -921,6 +1036,7 @@ auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk4_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0320>; @@ -929,12 +1045,14 @@ auxclk4_src_ck: auxclk4_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk4_src_ck"; clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>; }; auxclk4_ck: auxclk4_ck@320 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk4_ck"; clocks = <&auxclk4_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -944,6 +1062,7 @@ auxclkreq0_ck: auxclkreq0_ck@210 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq0_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x0210>; @@ -952,6 +1071,7 @@ auxclkreq1_ck: auxclkreq1_ck@214 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq1_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x0214>; @@ -960,6 +1080,7 @@ auxclkreq2_ck: auxclkreq2_ck@218 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq2_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x0218>; @@ -968,6 +1089,7 @@ auxclkreq3_ck: auxclkreq3_ck@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq3_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x021c>; @@ -977,6 +1099,7 @@ &cm_core_aon { mpu_cm: mpu_cm@300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -984,6 +1107,7 @@ mpu_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -991,6 +1115,7 @@ dsp_cm: dsp_cm@400 { compatible = "ti,omap4-cm"; + clock-output-names = "dsp_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -998,6 +1123,7 @@ dsp_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "dsp_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1005,6 +1131,7 @@ abe_cm: abe_cm@500 { compatible = "ti,omap4-cm"; + clock-output-names = "abe_cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1012,6 +1139,7 @@ abe_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "abe_clkctrl"; reg = <0x20 0x64>; #clock-cells = <2>; }; @@ -1022,6 +1150,7 @@ &cm_core { l3main1_cm: l3main1_cm@700 { compatible = "ti,omap4-cm"; + clock-output-names = "l3main1_cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1029,6 +1158,7 @@ l3main1_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3main1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1036,6 +1166,7 @@ l3main2_cm: l3main2_cm@800 { compatible = "ti,omap4-cm"; + clock-output-names = "l3main2_cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1043,6 +1174,7 @@ l3main2_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3main2_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1050,6 +1182,7 @@ ipu_cm: ipu_cm@900 { compatible = "ti,omap4-cm"; + clock-output-names = "ipu_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1057,6 +1190,7 @@ ipu_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "ipu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1064,6 +1198,7 @@ dma_cm: dma_cm@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "dma_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1071,6 +1206,7 @@ dma_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "dma_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1078,6 +1214,7 @@ emif_cm: emif_cm@b00 { compatible = "ti,omap4-cm"; + clock-output-names = "emif_cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1085,6 +1222,7 @@ emif_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "emif_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; @@ -1092,6 +1230,7 @@ l4cfg_cm: l4cfg_cm@d00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4cfg_cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1099,6 +1238,7 @@ l4cfg_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4cfg_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; @@ -1106,6 +1246,7 @@ l3instr_cm: l3instr_cm@e00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3instr_cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1113,26 +1254,30 @@ l3instr_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3instr_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - l4per_cm: l4per_cm@1000 { + l4per_cm: clock@1000 { compatible = "ti,omap4-cm"; + clock-output-names = "l4per_cm"; reg = <0x1000 0x200>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1000 0x200>; l4per_clkctrl: clock@20 { - compatible = "ti,clkctrl-l4per", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4per_clkctrl"; reg = <0x20 0x15c>; #clock-cells = <2>; }; l4sec_clkctrl: clock@1a0 { - compatible = "ti,clkctrl-l4sec", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4sec_clkctrl"; reg = <0x1a0 0x3c>; #clock-cells = <2>; }; @@ -1140,6 +1285,7 @@ dss_cm: dss_cm@1400 { compatible = "ti,omap4-cm"; + clock-output-names = "dss_cm"; reg = <0x1400 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1147,6 +1293,7 @@ dss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "dss_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1154,6 +1301,7 @@ gpu_cm: gpu_cm@1500 { compatible = "ti,omap4-cm"; + clock-output-names = "gpu_cm"; reg = <0x1500 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1161,6 +1309,7 @@ gpu_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "gpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1168,6 +1317,7 @@ l3init_cm: l3init_cm@1600 { compatible = "ti,omap4-cm"; + clock-output-names = "l3init_cm"; reg = <0x1600 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1175,6 +1325,7 @@ l3init_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3init_clkctrl"; reg = <0x20 0xd4>; #clock-cells = <2>; }; @@ -1184,6 +1335,7 @@ &prm { wkupaon_cm: wkupaon_cm@1900 { compatible = "ti,omap4-cm"; + clock-output-names = "wkupaon_cm"; reg = <0x1900 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1191,6 +1343,7 @@ wkupaon_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "wkupaon_clkctrl"; reg = <0x20 0x5c>; #clock-cells = <2>; }; @@ -1201,6 +1354,7 @@ fref_xtal_ck: fref_xtal_ck { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "fref_xtal_ck"; clocks = <&sys_clkin>; ti,bit-shift = <28>; reg = <0x14>; diff --git a/dts/src/arm/ox820.dtsi b/dts/src/arm/ox820.dtsi index 90846a7655..dde4364892 100644 --- a/dts/src/arm/ox820.dtsi +++ b/dts/src/arm/ox820.dtsi @@ -287,7 +287,7 @@ clocks = <&armclk>; }; - gic: gic@1000 { + gic: interrupt-controller@1000 { compatible = "arm,arm11mp-gic"; interrupt-controller; #interrupt-cells = <3>; diff --git a/dts/src/arm/pxa25x.dtsi b/dts/src/arm/pxa25x.dtsi index a248bf0380..5f8300e356 100644 --- a/dts/src/arm/pxa25x.dtsi +++ b/dts/src/arm/pxa25x.dtsi @@ -38,9 +38,12 @@ compatible = "marvell,pdma-1.0"; reg = <0x40000000 0x10000>; interrupts = <25>; - #dma-channels = <16>; #dma-cells = <2>; + /* For backwards compatibility: */ + #dma-channels = <16>; + dma-channels = <16>; #dma-requests = <40>; + dma-requests = <40>; status = "okay"; }; diff --git a/dts/src/arm/pxa27x.dtsi b/dts/src/arm/pxa27x.dtsi index ccbecad9c5..a2cbfb3be6 100644 --- a/dts/src/arm/pxa27x.dtsi +++ b/dts/src/arm/pxa27x.dtsi @@ -12,9 +12,12 @@ compatible = "marvell,pdma-1.0"; reg = <0x40000000 0x10000>; interrupts = <25>; - #dma-channels = <32>; #dma-cells = <2>; + /* For backwards compatibility: */ + #dma-channels = <32>; + dma-channels = <32>; #dma-requests = <75>; + dma-requests = <75>; status = "okay"; }; diff --git a/dts/src/arm/pxa3xx.dtsi b/dts/src/arm/pxa3xx.dtsi index d19674812c..f9c216f918 100644 --- a/dts/src/arm/pxa3xx.dtsi +++ b/dts/src/arm/pxa3xx.dtsi @@ -122,9 +122,12 @@ compatible = "marvell,pdma-1.0"; reg = <0x40000000 0x10000>; interrupts = <25>; - #dma-channels = <32>; #dma-cells = <2>; + /* For backwards compatibility: */ + #dma-channels = <32>; + dma-channels = <32>; #dma-requests = <100>; + dma-requests = <100>; status = "okay"; }; diff --git a/dts/src/arm/qcom-apq8026-asus-sparrow.dts b/dts/src/arm/qcom-apq8026-asus-sparrow.dts new file mode 100644 index 0000000000..ace8cea279 --- /dev/null +++ b/dts/src/arm/qcom-apq8026-asus-sparrow.dts @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Luca Weiss + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/ { + model = "ASUS ZenWatch 2"; + compatible = "asus,sparrow", "qcom,apq8026"; + chassis-type = "watch"; + qcom,msm-id = <199 0x20000>; + qcom,board-id = <8 3005>; + + reserved-memory { + sbl_region: sbl@2f00000 { + reg = <0x02f00000 0x100000>; + no-map; + }; + external_image_region: external-image@3100000 { + reg = <0x3100000 0x200000>; + no-map; + }; + peripheral_region: peripheral@3300000 { + reg = <0x3300000 0x600000>; + no-map; + }; + adsp_region: adsp@3900000 { + reg = <0x3900000 0x1400000>; + no-map; + }; + modem_region: modem@4d00000 { + reg = <0x4d00000 0x1b00000>; + no-map; + }; + modem_efs_region: modem-efs@7f00000 { + reg = <0x7f00000 0x100000>; + no-map; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_default_state>; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart1_default_state>; + + bluetooth { + compatible = "brcm,bcm43430a1-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_state>; + + host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; + }; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + pm8226-regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l7: l7 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + }; + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + pm8226_l15: l15 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + non-removable; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8226_l6>; + + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_hostwake_default_state>; + }; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <350000>; + qcom,fast-charge-safe-voltage = <4430000>; + qcom,fast-charge-high-threshold-voltage = <4400000>; + qcom,auto-recharge-threshold-voltage = <4300000>; + qcom,minimum-input-voltage = <4400000>; +}; + +&tlmm { + blsp1_uart1_default_state: blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <8>; + bias-disable; + }; + + bluetooth_default_state: bluetooth-default-state { + pins = "gpio48", "gpio61"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + input-enable; + }; + + wlan_hostwake_default_state: wlan-hostwake-default-state { + pins = "gpio46"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + wlan_regulator_default_state: wlan-regulator-default-state { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&usb { + status = "okay"; + extcon = <&smbb>; + dr_mode = "peripheral"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/dts/src/arm/qcom-apq8064-sony-xperia-lagan-yuga.dts b/dts/src/arm/qcom-apq8064-sony-xperia-lagan-yuga.dts new file mode 100644 index 0000000000..0cee62c7b8 --- /dev/null +++ b/dts/src/arm/qcom-apq8064-sony-xperia-lagan-yuga.dts @@ -0,0 +1,401 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-apq8064-v2.0.dtsi" +#include +#include +#include +#include + +/ { + model = "Sony Xperia Z"; + compatible = "sony,xperia-yuga", "qcom,apq8064"; + + aliases { + serial0 = &gsbi5_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + }; + + soc { + pinctrl@800000 { + gsbi5_uart_pin_a: gsbi5-uart-pin-active { + rx { + pins = "gpio52"; + function = "gsbi5"; + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio51"; + function = "gsbi5"; + drive-strength = <4>; + bias-disable; + }; + }; + + + sdcc3_cd_pin_a: sdcc3-cd-pin-active { + pins = "gpio26"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + + + rpm@108000 { + regulators { + vin_l1_l2_l12_l18-supply = <&pm8921_s4>; + vin_lvs_1_3_6-supply = <&pm8921_s4>; + vin_lvs_4_5_7-supply = <&pm8921_s4>; + vin_ncp-supply = <&pm8921_l6>; + vin_lvs2-supply = <&pm8921_s4>; + vin_l24-supply = <&pm8921_s1>; + vin_l25-supply = <&pm8921_s1>; + vin_l27-supply = <&pm8921_s7>; + vin_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + bias-pull-down; + }; + + s4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + qcom,force-mode = ; + }; + + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + s8 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + }; + + /* PMOS LDO */ + l1 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + bias-pull-down; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + l4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + bias-pull-down; + }; + + l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + l10 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + bias-pull-down; + }; + + l11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + l12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + bias-pull-down; + }; + + l17 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + bias-pull-down; + }; + + l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + l21 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + l22 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + + l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + l24 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + l25 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + l27 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + l28 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + l29 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + lvs1 { + bias-pull-down; + }; + + lvs2 { + bias-pull-down; + }; + + lvs3 { + bias-pull-down; + }; + + lvs4 { + bias-pull-down; + }; + + lvs5 { + bias-pull-down; + }; + + lvs6 { + bias-pull-down; + }; + + lvs7 { + bias-pull-down; + }; + + usb-switch {}; + + hdmi-switch {}; + + ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; + }; + + qcom,ssbi@500000 { + pmic@0 { + gpio@150 { + gpio_keys_pin_a: gpio-keys-pin-active { + pins = "gpio3", "gpio4", "gpio29", "gpio35"; + function = "normal"; + + bias-pull-up; + drive-push-pull; + input-enable; + power-source = <2>; + qcom,drive-strength = ; + qcom,pull-up-strength = <0>; + }; + }; + }; + }; + + usb@12500000 { + status = "okay"; + dr_mode = "otg"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + }; + }; + + gsbi@1a200000 { + status = "okay"; + qcom,mode = ; + + serial@1a240000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&gsbi5_uart_pin_a>; + }; + }; + + amba { + sdcc1: mmc@12400000 { + status = "okay"; + + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + }; + + sdcc3: mmc@12180000 { + status = "okay"; + + vmmc-supply = <&pm8921_l6>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; + }; + }; + + riva-pil@3204000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + }; + }; +}; diff --git a/dts/src/arm/qcom-apq8064-sony-xperia-yuga.dts b/dts/src/arm/qcom-apq8064-sony-xperia-yuga.dts deleted file mode 100644 index 0cee62c7b8..0000000000 --- a/dts/src/arm/qcom-apq8064-sony-xperia-yuga.dts +++ /dev/null @@ -1,401 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" -#include -#include -#include -#include - -/ { - model = "Sony Xperia Z"; - compatible = "sony,xperia-yuga", "qcom,apq8064"; - - aliases { - serial0 = &gsbi5_serial; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - - volume-down { - label = "volume_down"; - gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - }; - - soc { - pinctrl@800000 { - gsbi5_uart_pin_a: gsbi5-uart-pin-active { - rx { - pins = "gpio52"; - function = "gsbi5"; - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio51"; - function = "gsbi5"; - drive-strength = <4>; - bias-disable; - }; - }; - - - sdcc3_cd_pin_a: sdcc3-cd-pin-active { - pins = "gpio26"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - }; - - - rpm@108000 { - regulators { - vin_l1_l2_l12_l18-supply = <&pm8921_s4>; - vin_lvs_1_3_6-supply = <&pm8921_s4>; - vin_lvs_4_5_7-supply = <&pm8921_s4>; - vin_ncp-supply = <&pm8921_l6>; - vin_lvs2-supply = <&pm8921_s4>; - vin_l24-supply = <&pm8921_s1>; - vin_l25-supply = <&pm8921_s1>; - vin_l27-supply = <&pm8921_s7>; - vin_l28-supply = <&pm8921_s7>; - - /* Buck SMPS */ - s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - s2 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1150000>; - qcom,switch-mode-frequency = <4800000>; - bias-pull-down; - }; - - s4 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - qcom,force-mode = ; - }; - - s7 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <3200000>; - }; - - s8 { - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - qcom,switch-mode-frequency = <1600000>; - }; - - /* PMOS LDO */ - l1 { - regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - bias-pull-down; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - l3 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - bias-pull-down; - }; - - l4 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l5 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - l6 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - l7 { - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - l8 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - bias-pull-down; - }; - - l9 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - l10 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - bias-pull-down; - }; - - l11 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - l12 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - l16 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - bias-pull-down; - }; - - l17 { - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - bias-pull-down; - }; - - l18 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - l21 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - l22 { - regulator-min-microvolt = <2600000>; - regulator-max-microvolt = <2600000>; - bias-pull-down; - }; - - l23 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l24 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1150000>; - bias-pull-down; - }; - - l25 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - bias-pull-down; - }; - - l27 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - l28 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - l29 { - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - bias-pull-down; - }; - - /* Low Voltage Switch */ - lvs1 { - bias-pull-down; - }; - - lvs2 { - bias-pull-down; - }; - - lvs3 { - bias-pull-down; - }; - - lvs4 { - bias-pull-down; - }; - - lvs5 { - bias-pull-down; - }; - - lvs6 { - bias-pull-down; - }; - - lvs7 { - bias-pull-down; - }; - - usb-switch {}; - - hdmi-switch {}; - - ncp { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - }; - }; - }; - - qcom,ssbi@500000 { - pmic@0 { - gpio@150 { - gpio_keys_pin_a: gpio-keys-pin-active { - pins = "gpio3", "gpio4", "gpio29", "gpio35"; - function = "normal"; - - bias-pull-up; - drive-push-pull; - input-enable; - power-source = <2>; - qcom,drive-strength = ; - qcom,pull-up-strength = <0>; - }; - }; - }; - }; - - usb@12500000 { - status = "okay"; - dr_mode = "otg"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - }; - }; - - gsbi@1a200000 { - status = "okay"; - qcom,mode = ; - - serial@1a240000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&gsbi5_uart_pin_a>; - }; - }; - - amba { - sdcc1: mmc@12400000 { - status = "okay"; - - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - }; - - sdcc3: mmc@12180000 { - status = "okay"; - - vmmc-supply = <&pm8921_l6>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; - }; - }; - - riva-pil@3204000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; - }; - }; -}; diff --git a/dts/src/arm/qcom-apq8064.dtsi b/dts/src/arm/qcom-apq8064.dtsi index a1c8ae516d..34c0ba7fa3 100644 --- a/dts/src/arm/qcom-apq8064.dtsi +++ b/dts/src/arm/qcom-apq8064.dtsi @@ -227,7 +227,7 @@ smd { compatible = "qcom,smd"; - modem@0 { + modem-edge { interrupts = <0 37 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&l2cc 8 3>; @@ -236,7 +236,7 @@ status = "disabled"; }; - q6@1 { + q6-edge { interrupts = <0 90 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&l2cc 8 15>; @@ -245,7 +245,7 @@ status = "disabled"; }; - dsps@3 { + dsps-edge { interrupts = <0 138 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&sps_sic_non_secure 0x4080 0>; @@ -254,7 +254,7 @@ status = "disabled"; }; - riva@6 { + riva-edge { interrupts = <0 198 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&l2cc 8 25>; @@ -1040,7 +1040,7 @@ }; /* Temporary fixed regulator */ - sdcc1bam:dma@12402000{ + sdcc1bam: dma-controller@12402000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; @@ -1050,7 +1050,7 @@ qcom,ee = <0>; }; - sdcc3bam:dma@12182000{ + sdcc3bam: dma-controller@12182000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; @@ -1060,7 +1060,7 @@ qcom,ee = <0>; }; - sdcc4bam:dma@121c2000{ + sdcc4bam: dma-controller@121c2000{ compatible = "qcom,bam-v1.3.0"; reg = <0x121c2000 0x8000>; interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; @@ -1548,7 +1548,7 @@ qcom,mmio = <&riva>; - bt { + bluetooth { compatible = "qcom,wcnss-bt"; }; diff --git a/dts/src/arm/qcom-apq8074-dragonboard.dts b/dts/src/arm/qcom-apq8074-dragonboard.dts index 83793b835d..3051a861ff 100644 --- a/dts/src/arm/qcom-apq8074-dragonboard.dts +++ b/dts/src/arm/qcom-apq8074-dragonboard.dts @@ -16,331 +16,293 @@ chosen { stdout-path = "serial0:115200n8"; }; +}; + +&blsp1_uart2 { + status = "okay"; +}; - soc { - serial@f991e000 { +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <200000>; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + read-only; + }; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs2_phy>; + phy-select = <&tcsr 0xb000 1>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@b { status = "okay"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + }; + }; +}; + +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; }; - sdhci@f9824900 { - bus-width = <8>; - non-removable; - status = "okay"; + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; + pm8841_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; + pm8841_s4: s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; }; + }; - sdhci@f98a4900 { - cd-gpios = <&msmgpio 62 0x1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - bus-width = <4>; - status = "okay"; + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vin_5vs-supply = <&pm8941_5v>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; }; - usb@f9a55000 { - status = "okay"; - phys = <&usb_hs2_phy>; - phy-select = <&tcsr 0xb000 1>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - hnp-disable; - srp-disable; - adp-disable; - ulpi { - phy@b { - status = "okay"; - v3p3-supply = <&pm8941_l24>; - v1p8-supply = <&pm8941_l6>; - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x63>; - }; - }; - }; - - - pinctrl@fd510000 { - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; - }; - }; - - spi8_default: spi8_default { - mosi { - pins = "gpio45"; - function = "blsp_spi8"; - }; - miso { - pins = "gpio46"; - function = "blsp_spi8"; - }; - cs { - pins = "gpio47"; - function = "blsp_spi8"; - }; - clk { - pins = "gpio48"; - function = "blsp_spi8"; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - }; - - i2c@f9967000 { - status = "okay"; - clock-frequency = <200000>; - pinctrl-0 = <&i2c11_pins>; - pinctrl-names = "default"; + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - eeprom: eeprom@52 { - compatible = "atmel,24c128"; - reg = <0x52>; - pagesize = <32>; - read-only; - }; + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; }; }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 62 0x1>; + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vin_5vs-supply = <&pm8941_5v>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; }; diff --git a/dts/src/arm/qcom-apq8084.dtsi b/dts/src/arm/qcom-apq8084.dtsi index 52240fc7a1..da50a1a019 100644 --- a/dts/src/arm/qcom-apq8084.dtsi +++ b/dts/src/arm/qcom-apq8084.dtsi @@ -470,7 +470,7 @@ qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm_requests { + rpm-requests { compatible = "qcom,rpm-apq8084"; qcom,smd-channels = "rpm_requests"; diff --git a/dts/src/arm/qcom-ipq4019-ap.dk01.1.dtsi b/dts/src/arm/qcom-ipq4019-ap.dk01.1.dtsi index 0c10d9e096..03bb9e1768 100644 --- a/dts/src/arm/qcom-ipq4019-ap.dk01.1.dtsi +++ b/dts/src/arm/qcom-ipq4019-ap.dk01.1.dtsi @@ -64,7 +64,7 @@ }; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { status = "okay"; }; @@ -89,7 +89,7 @@ status = "okay"; }; - cryptobam: dma@8e04000 { + cryptobam: dma-controller@8e04000 { status = "okay"; }; diff --git a/dts/src/arm/qcom-ipq4019-ap.dk04.1-c1.dts b/dts/src/arm/qcom-ipq4019-ap.dk04.1-c1.dts index a7b1201dd6..79b0c6318e 100644 --- a/dts/src/arm/qcom-ipq4019-ap.dk04.1-c1.dts +++ b/dts/src/arm/qcom-ipq4019-ap.dk04.1-c1.dts @@ -8,7 +8,7 @@ compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019"; soc { - dma@7984000 { + dma-controller@7984000 { status = "okay"; }; diff --git a/dts/src/arm/qcom-ipq4019-ap.dk04.1.dtsi b/dts/src/arm/qcom-ipq4019-ap.dk04.1.dtsi index 7a337dc087..faeaa6bf0d 100644 --- a/dts/src/arm/qcom-ipq4019-ap.dk04.1.dtsi +++ b/dts/src/arm/qcom-ipq4019-ap.dk04.1.dtsi @@ -79,7 +79,7 @@ status = "okay"; }; - dma@7884000 { + dma-controller@7884000 { status = "okay"; }; @@ -89,7 +89,7 @@ status = "okay"; cs-gpios = <&tlmm 12 0>; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; diff --git a/dts/src/arm/qcom-ipq4019-ap.dk07.1-c1.dts b/dts/src/arm/qcom-ipq4019-ap.dk07.1-c1.dts index 06f9f2cb2f..d596dd1180 100644 --- a/dts/src/arm/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/dts/src/arm/qcom-ipq4019-ap.dk07.1-c1.dts @@ -52,7 +52,7 @@ status = "okay"; cs-gpios = <&tlmm 12 0>; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; diff --git a/dts/src/arm/qcom-ipq4019-ap.dk07.1.dtsi b/dts/src/arm/qcom-ipq4019-ap.dk07.1.dtsi index 94872518b5..0107f552f5 100644 --- a/dts/src/arm/qcom-ipq4019-ap.dk07.1.dtsi +++ b/dts/src/arm/qcom-ipq4019-ap.dk07.1.dtsi @@ -52,7 +52,7 @@ status = "okay"; }; - dma@7884000 { + dma-controller@7884000 { status = "okay"; }; @@ -62,7 +62,7 @@ status = "okay"; }; - dma@7984000 { + dma-controller@7984000 { status = "okay"; }; diff --git a/dts/src/arm/qcom-ipq4019.dtsi b/dts/src/arm/qcom-ipq4019.dtsi index a9d0566a31..c5da723f76 100644 --- a/dts/src/arm/qcom-ipq4019.dtsi +++ b/dts/src/arm/qcom-ipq4019.dtsi @@ -233,7 +233,7 @@ status = "disabled"; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x23000>; interrupts = ; @@ -253,8 +253,8 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 5>, <&blsp_dma 4>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -267,8 +267,8 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 7>, <&blsp_dma 6>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -276,13 +276,13 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b7000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 9>, <&blsp_dma 8>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -290,17 +290,17 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b8000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 11>, <&blsp_dma 10>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; status = "disabled"; }; - cryptobam: dma@8e04000 { + cryptobam: dma-controller@8e04000 { compatible = "qcom,bam-v1.7.0"; reg = <0x08e04000 0x20000>; interrupts = ; @@ -382,8 +382,8 @@ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 1>, <&blsp_dma 0>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; }; blsp1_uart2: serial@78b0000 { @@ -394,8 +394,8 @@ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 3>, <&blsp_dma 2>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; }; watchdog: watchdog@b017000 { @@ -471,7 +471,7 @@ status = "disabled"; }; - qpic_bam: dma@7984000 { + qpic_bam: dma-controller@7984000 { compatible = "qcom,bam-v1.7.0"; reg = <0x7984000 0x1a000>; interrupts = ; @@ -646,7 +646,7 @@ clocks = <&gcc GCC_USB3_MASTER_CLK>, <&gcc GCC_USB3_SLEEP_CLK>, <&gcc GCC_USB3_MOCK_UTMI_CLK>; - clock-names = "master", "sleep", "mock_utmi"; + clock-names = "core", "sleep", "mock_utmi"; ranges; status = "disabled"; diff --git a/dts/src/arm/qcom-ipq8064-v1.0.dtsi b/dts/src/arm/qcom-ipq8064-v1.0.dtsi index 6533006539..5c802b99e1 100644 --- a/dts/src/arm/qcom-ipq8064-v1.0.dtsi +++ b/dts/src/arm/qcom-ipq8064-v1.0.dtsi @@ -36,7 +36,7 @@ cs-gpios = <&qcom_pinmux 20 0>; - flash: m25p80@0 { + flash: flash@0 { compatible = "s25fl256s1"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/qcom-ipq8064.dtsi b/dts/src/arm/qcom-ipq8064.dtsi index 8cb04aa8ed..808ea18622 100644 --- a/dts/src/arm/qcom-ipq8064.dtsi +++ b/dts/src/arm/qcom-ipq8064.dtsi @@ -298,13 +298,13 @@ }; clocks { - cxo_board { + cxo_board: cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; }; - pxo_board { + pxo_board: pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; @@ -736,7 +736,9 @@ }; gcc: clock-controller@900000 { - compatible = "qcom,gcc-ipq8064"; + compatible = "qcom,gcc-ipq8064", "syscon"; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; @@ -1155,7 +1157,7 @@ regulator-always-on; }; - sdcc1bam: dma@12402000 { + sdcc1bam: dma-controller@12402000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; interrupts = ; @@ -1165,7 +1167,7 @@ qcom,ee = <0>; }; - sdcc3bam: dma@12182000 { + sdcc3bam: dma-controller@12182000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = ; diff --git a/dts/src/arm/qcom-mdm9615.dtsi b/dts/src/arm/qcom-mdm9615.dtsi index 4d4f37cebf..8f0752ce1c 100644 --- a/dts/src/arm/qcom-mdm9615.dtsi +++ b/dts/src/arm/qcom-mdm9615.dtsi @@ -330,7 +330,7 @@ }; }; - sdcc1bam: dma@12182000{ + sdcc1bam: dma-controller@12182000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = ; @@ -340,7 +340,7 @@ qcom,ee = <0>; }; - sdcc2bam: dma@12142000{ + sdcc2bam: dma-controller@12142000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12142000 0x8000>; interrupts = ; diff --git a/dts/src/arm/qcom-msm8226.dtsi b/dts/src/arm/qcom-msm8226.dtsi index 85e56992d2..28eca15b57 100644 --- a/dts/src/arm/qcom-msm8226.dtsi +++ b/dts/src/arm/qcom-msm8226.dtsi @@ -182,6 +182,15 @@ status = "disabled"; }; + blsp1_uart1: serial@f991d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991d000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_uart3: serial@f991f000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991f000 0x1000>; diff --git a/dts/src/arm/qcom-msm8660.dtsi b/dts/src/arm/qcom-msm8660.dtsi index a258abb23a..47b97daece 100644 --- a/dts/src/arm/qcom-msm8660.dtsi +++ b/dts/src/arm/qcom-msm8660.dtsi @@ -212,6 +212,7 @@ ranges; syscon-tcsr = <&tcsr>; + status = "disabled"; gsbi8_i2c: i2c@19880000 { compatible = "qcom,i2c-qup-v1.1.1"; diff --git a/dts/src/arm/qcom-msm8974-fairphone-fp2.dts b/dts/src/arm/qcom-msm8974-fairphone-fp2.dts deleted file mode 100644 index 6d77e0f8ca..0000000000 --- a/dts/src/arm/qcom-msm8974-fairphone-fp2.dts +++ /dev/null @@ -1,409 +0,0 @@ -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include -#include -#include - - -/ { - model = "Fairphone 2"; - compatible = "fairphone,fp2", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; - linux,code = ; - wakeup-source; - debounce-interval = <15>; - }; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,code = ; - wakeup-source; - debounce-interval = <15>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,code = ; - wakeup-source; - debounce-interval = <15>; - }; - }; - - vibrator { - compatible = "gpio-vibrator"; - enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>; - vcc-supply = <&pm8941_l18>; - }; - - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <3350000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - serial@f991e000 { - status = "okay"; - }; - - remoteproc@fb21b000 { - status = "okay"; - - vddmx-supply = <&pm8841_s1>; - vddcx-supply = <&pm8841_s2>; - - pinctrl-names = "default"; - pinctrl-0 = <&wcnss_pin_a>; - - smd-edge { - qcom,remote-pid = <4>; - label = "pronto"; - - wcnss { - status = "okay"; - }; - }; - }; - - pinctrl@fd510000 { - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - wcnss_pin_a: wcnss-pin-active { - wlan { - pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; - function = "wlan"; - - drive-strength = <6>; - bias-pull-down; - }; - - bt { - pins = "gpio35", "gpio43", "gpio44"; - function = "bt"; - - drive-strength = <2>; - bias-pull-down; - }; - - fm { - pins = "gpio41", "gpio42"; - function = "fm"; - - drive-strength = <2>; - bias-pull-down; - }; - }; - }; - - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - bus-width = <4>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - imem@fe805000 { - status = "okay"; - - reboot-mode { - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio1", "gpio2", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = ; - }; - }; - }; -}; diff --git a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts index 0691361701..9493886a5c 100644 --- a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -2,7 +2,6 @@ #include "qcom-msm8974.dtsi" #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" -#include #include #include @@ -12,213 +11,31 @@ aliases { serial0 = &blsp1_uart1; - serial1 = &blsp2_uart10; + serial1 = &blsp2_uart4; }; chosen { stdout-path = "serial0:115200n8"; }; - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <815000>; - regulator-max-microvolt = <900000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; }; }; @@ -229,7 +46,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -237,525 +54,570 @@ }; }; -&soc { - serial@f991d000 { - status = "okay"; +&blsp1_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + charger: bq24192@6b { + compatible = "ti,bq24192"; + reg = <0x6b>; + interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; }; - pinctrl@fd510000 { - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; + fuelgauge: max17048@36 { + compatible = "maxim,max17048"; + reg = <0x36>; - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x4d>; - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; - i2c1_pins: i2c1 { - mux { - pins = "gpio2", "gpio3"; - function = "blsp_i2c1"; + maxim,alert-low-soc-level = <2>; + }; +}; - drive-strength = <2>; - bias-disable; - }; - }; +&blsp1_i2c2 { + status = "okay"; + clock-frequency = <355000>; - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; + synaptics@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; - drive-strength = <2>; - bias-disable; - }; - }; + interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; - i2c3_pins: i2c3 { - mux { - pins = "gpio10", "gpio11"; - function = "blsp_i2c3"; - drive-strength = <2>; - bias-disable; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; + #address-cells = <1>; + #size-cells = <0>; - drive-strength = <2>; - bias-disable; - }; + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; }; - i2c12_pins: i2c12 { - mux { - pins = "gpio87", "gpio88"; - function = "blsp_i2c12"; - drive-strength = <2>; - bias-disable; - }; + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; }; + }; +}; - mpu6515_pin: mpu6515 { - irq { - pins = "gpio73"; - function = "gpio"; - bias-disable; - input-enable; - }; - }; +&blsp1_i2c3 { + status = "okay"; + clock-frequency = <100000>; + + avago_apds993@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + led-max-microamp = <100000>; + amstaos,proximity-diodes = <0>; + }; +}; - touch_pin: touch { - int { - pins = "gpio5"; - function = "gpio"; +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; - drive-strength = <2>; - bias-disable; - input-enable; - }; + led-controller@38 { + compatible = "ti,lm3630a"; + status = "okay"; + reg = <0x38>; - reset { - pins = "gpio8"; - function = "gpio"; + #address-cells = <1>; + #size-cells = <0>; - drive-strength = <2>; - bias-pull-up; - }; + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <200>; }; + }; +}; - panel_pin: panel { - te { - pins = "gpio12"; - function = "mdp_vsync"; +&blsp2_i2c6 { + status = "okay"; + clock-frequency = <100000>; - drive-strength = <2>; - bias-disable; - }; - }; + mpu6515@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>; + vddio-supply = <&pm8941_lvs1>; - bt_pin: bt { - hostwake { - pins = "gpio42"; - function = "gpio"; - }; + pinctrl-names = "default"; + pinctrl-0 = <&mpu6515_pin>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; - devwake { - pins = "gpio62"; - function = "gpio"; + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ak8963@f { + compatible = "asahi-kasei,ak8963"; + reg = <0x0f>; + gpios = <&tlmm 67 0>; + vid-supply = <&pm8941_lvs1>; + vdd-supply = <&pm8941_l17>; }; - shutdown { - pins = "gpio41"; - function = "gpio"; + bmp280@76 { + compatible = "bosch,bmp280"; + reg = <0x76>; + vdda-supply = <&pm8941_lvs1>; + vddd-supply = <&pm8941_l17>; }; }; + }; +}; - blsp2_uart10_pin_a: blsp2-uart10-pin-active { - tx { - pins = "gpio53"; - function = "blsp_uart10"; +&blsp1_uart1 { + status = "okay"; +}; - drive-strength = <2>; - bias-disable; - }; +&blsp2_uart4 { + status = "okay"; - rx { - pins = "gpio54"; - function = "blsp_uart10"; + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; - drive-strength = <2>; - bias-pull-up; - }; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pin>; + + host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + }; +}; - cts { - pins = "gpio55"; - function = "blsp_uart10"; +&dsi0 { + status = "okay"; - drive-strength = <2>; - bias-pull-up; - }; + vdda-supply = <&pm8941_l2>; + vdd-supply = <&pm8941_lvs3>; + vddio-supply = <&pm8941_l12>; - rts { - pins = "gpio56"; - function = "blsp_uart10"; + panel: panel@0 { + reg = <0>; + compatible = "lg,acx467akm-7"; - drive-strength = <2>; - bias-disable; + pinctrl-names = "default"; + pinctrl-0 = <&panel_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; +}; - sdhci@f9824900 { - status = "okay"; +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; +&dsi0_phy { + status = "okay"; - bus-width = <8>; - non-removable; + vddio-supply = <&pm8941_l12>; +}; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; +&mdss { + status = "okay"; +}; - sdhci@f98a4900 { - status = "okay"; +&otg { + status = "okay"; - max-frequency = <100000000>; - bus-width = <4>; - non-removable; - vmmc-supply = <&vreg_wlan>; - vqmmc-supply = <&pm8941_s3>; + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>; + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; - #address-cells = <1>; - #size-cells = <0>; + hnp-disable; + srp-disable; + adp-disable; - bcrmf@1 { - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; - reg = <1>; + ulpi { + phy@a { + status = "okay"; - brcm,drive-strength = <10>; + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; }; }; +}; - gpio-keys { - compatible = "gpio-keys"; +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3"; + function = "normal"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; + bias-pull-up; + power-source = ; + }; - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; + fuelgauge_pin: fuelgauge-int { + pins = "gpio9"; + function = "normal"; - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; + bias-disable; + input-enable; + power-source = ; }; - serial@f9960000 { - status = "okay"; + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio16"; + function = "func2"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart10_pin_a>; + output-high; + power-source = ; + }; - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <3000000>; + wlan_regulator_pin: wl-reg-active { + pins = "gpio17"; + function = "normal"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_pin>; + bias-disable; + power-source = ; + }; - host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>; - }; + otg { + gpio-hog; + gpios = <35 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "otg-gpio"; }; +}; - i2c@f9967000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_pins>; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; - led-controller@38 { - compatible = "ti,lm3630a"; - status = "okay"; - reg = <0x38>; + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; - #address-cells = <1>; - #size-cells = <0>; + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - led@0 { - reg = <0>; - led-sources = <0 1>; - label = "lcd-backlight"; - default-brightness = <200>; - }; + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; }; - }; - i2c@f9968000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c12_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; - - mpu6515@68 { - compatible = "invensense,mpu6515"; - reg = <0x68>; - interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>; - vddio-supply = <&pm8941_lvs1>; - - pinctrl-names = "default"; - pinctrl-0 = <&mpu6515_pin>; - - mount-matrix = "0", "-1", "0", - "-1", "0", "0", - "0", "0", "1"; - - i2c-gate { - #address-cells = <1>; - #size-cells = <0>; - ak8963@f { - compatible = "asahi-kasei,ak8963"; - reg = <0x0f>; - gpios = <&msmgpio 67 0>; - vid-supply = <&pm8941_lvs1>; - vdd-supply = <&pm8941_l17>; - }; - - bmp280@76 { - compatible = "bosch,bmp280"; - reg = <0x76>; - vdda-supply = <&pm8941_lvs1>; - vddd-supply = <&pm8941_l17>; - }; - }; + pm8841_s4: s4 { + regulator-min-microvolt = <815000>; + regulator-max-microvolt = <900000>; }; }; - i2c@f9923000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; - charger: bq24192@6b { - compatible = "ti,bq24192"; - reg = <0x6b>; - interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; - omit-battery-class; + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - usb_otg_vbus: usb-otg-vbus { }; + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; }; - fuelgauge: max17048@36 { - compatible = "maxim,max17048"; - reg = <0x36>; + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; - maxim,double-soc; - maxim,rcomp = /bits/ 8 <0x4d>; + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; - interrupt-parent = <&msmgpio>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&fuelgauge_pin>; + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - maxim,alert-low-soc-level = <2>; + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; }; - }; - i2c@f9924000 { - status = "okay"; + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; - synaptics@70 { - compatible = "syna,rmi4-i2c"; - reg = <0x70>; + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; - interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&touch_pin>; + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - #address-cells = <1>; - #size-cells = <0>; + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - }; + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; }; - }; - i2c@f9925000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; - - avago_apds993@39 { - compatible = "avago,apds9930"; - reg = <0x39>; - interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l17>; - vddio-supply = <&pm8941_lvs1>; - led-max-microamp = <100000>; - amstaos,proximity-diodes = <0>; + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; }; - }; - usb@f9a55000 { - status = "okay"; + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; + pm8941_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; - extcon = <&charger>, <&usb_id>; - vbus-supply = <&usb_otg_vbus>; + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; - hnp-disable; - srp-disable; - adp-disable; + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; - ulpi { - phy@a { - status = "okay"; + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; }; + + pm8941_lvs1: lvs1 {}; + pm8941_lvs3: lvs3 {}; }; +}; - mdss@fd900000 { - status = "okay"; +&sdhc_1 { + status = "okay"; - mdp@fd900000 { - status = "okay"; - }; + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; - dsi@fd922800 { - status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; - vdda-supply = <&pm8941_l2>; - vdd-supply = <&pm8941_lvs3>; - vddio-supply = <&pm8941_l12>; +&sdhc_2 { + status = "okay"; - #address-cells = <1>; - #size-cells = <0>; + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8941_s3>; + non-removable; - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; - panel: panel@0 { - reg = <0>; - compatible = "lg,acx467akm-7"; + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&panel_pin>; + brcm,drive-strength = <10>; - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; }; - dsi-phy@fd922a00 { - status = "okay"; + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; - vddio-supply = <&pm8941_l12>; + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; }; }; -}; -&spmi_bus { - pm8941@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3"; - function = "normal"; + mpu6515_pin: mpu6515 { + pins = "gpio73"; + function = "gpio"; + bias-disable; + input-enable; + }; - bias-pull-up; - power-source = ; - }; + touch_pin: touch { + int { + pins = "gpio5"; + function = "gpio"; - fuelgauge_pin: fuelgauge-int { - pins = "gpio9"; - function = "normal"; + drive-strength = <2>; + bias-disable; + input-enable; + }; - bias-disable; - input-enable; - power-source = ; - }; + reset { + pins = "gpio8"; + function = "gpio"; - wlan_sleep_clk_pin: wl-sleep-clk { - pins = "gpio16"; - function = "func2"; + drive-strength = <2>; + bias-pull-up; + }; + }; - output-high; - power-source = ; - }; + panel_pin: panel { + pins = "gpio12"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; - wlan_regulator_pin: wl-reg-active { - pins = "gpio17"; - function = "normal"; + bt_pin: bt { + hostwake { + pins = "gpio42"; + function = "gpio"; + }; - bias-disable; - power-source = ; - }; + devwake { + pins = "gpio62"; + function = "gpio"; + }; - otg { - gpio-hog; - gpios = <35 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "otg-gpio"; - }; + shutdown { + pins = "gpio41"; + function = "gpio"; }; }; }; diff --git a/dts/src/arm/qcom-msm8974-samsung-klte.dts b/dts/src/arm/qcom-msm8974-samsung-klte.dts deleted file mode 100644 index 96e1c978b8..0000000000 --- a/dts/src/arm/qcom-msm8974-samsung-klte.dts +++ /dev/null @@ -1,908 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974pro.dtsi" -#include "qcom-pma8084.dtsi" -#include -#include -#include -#include - -/ { - model = "Samsung Galaxy S5"; - compatible = "samsung,klte", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart1; - mmc0 = &sdhc_1; /* SDC1 eMMC slot */ - mmc1 = &sdhc_2; /* SDC2 SD card slot */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - smd { - rpm { - rpm_requests { - pma8084-regulators { - compatible = "qcom,rpm-pma8084-regulators"; - status = "okay"; - - pma8084_s1: s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - }; - - pma8084_s2: s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - pma8084_s3: s3 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pma8084_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_s5: s5 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - - pma8084_s6: s6 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - pma8084_l1: l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pma8084_l3: l3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1200000>; - }; - - pma8084_l4: l4 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_l5: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l7: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l8: l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l9: l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l10: l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l11: l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pma8084_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - pma8084_l13: l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l15: l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - pma8084_l16: l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - pma8084_l17: l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pma8084_l18: l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pma8084_l19: l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - pma8084_l20: l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - pma8084_l21: l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - pma8084_l22: l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - pma8084_l23: l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - pma8084_l24: l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - pma8084_l25: l25 { - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2100000>; - }; - - pma8084_l26: l26 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2050000>; - }; - - pma8084_l27: l27 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_lvs1: lvs1 {}; - pma8084_lvs2: lvs2 {}; - pma8084_lvs3: lvs3 {}; - pma8084_lvs4: lvs4 {}; - - pma8084_5vs1: 5vs1 {}; - }; - }; - }; - }; - - i2c-gpio-touchkey { - compatible = "i2c-gpio"; - #address-cells = <1>; - #size-cells = <0>; - sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_touchkey_pins>; - - touchkey@20 { - compatible = "cypress,tm2-touchkey"; - reg = <0x20>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&touchkey_pin>; - - vcc-supply = <&max77826_ldo15>; - vdd-supply = <&pma8084_l19>; - - linux,keycodes = ; - }; - }; - - i2c-gpio-led { - compatible = "i2c-gpio"; - #address-cells = <1>; - #size-cells = <0>; - scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_led_gpioex_pins>; - - i2c-gpio,delay-us = <2>; - - gpio_expander: gpio@20 { - compatible = "nxp,pcal6416"; - reg = <0x20>; - - gpio-controller; - #gpio-cells = <2>; - - vcc-supply = <&pma8084_s4>; - - pinctrl-names = "default"; - pinctrl-0 = <&gpioex_pin>; - - reset-gpios = <&msmgpio 145 GPIO_ACTIVE_LOW>; - }; - - led-controller@30 { - compatible = "panasonic,an30259a"; - reg = <0x30>; - - #address-cells = <1>; - #size-cells = <0>; - - led@1 { - reg = <1>; - function = LED_FUNCTION_STATUS; - color = ; - }; - - led@2 { - reg = <2>; - function = LED_FUNCTION_STATUS; - color = ; - }; - - led@3 { - reg = <3>; - function = LED_FUNCTION_STATUS; - color = ; - }; - }; - }; - - vreg_wlan: wlan-regulator { - compatible = "regulator-fixed"; - - regulator-name = "wl-reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vreg_panel: panel-regulator { - compatible = "regulator-fixed"; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_en_pin>; - - regulator-name = "panel-vddr-reg"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - - gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - /delete-node/ vreg-boost; - - adsp-pil { - cx-supply = <&pma8084_s2>; - }; -}; - -&soc { - serial@f991e000 { - status = "okay"; - }; - - /* blsp2_uart8 */ - serial@f995e000 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart8_pins_active>; - pinctrl-1 = <&blsp2_uart8_pins_sleep>; - - bluetooth { - compatible = "brcm,bcm43540-bt"; - max-speed = <3000000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_pins>; - device-wakeup-gpios = <&msmgpio 91 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; - interrupt-parent = <&msmgpio>; - interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wakeup"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - debounce-interval = <15>; - }; - - home-key { - label = "home_key"; - gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - wakeup-source; - debounce-interval = <15>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - debounce-interval = <15>; - }; - }; - - pinctrl@fd510000 { - blsp2_uart8_pins_active: blsp2-uart8-pins-active { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "blsp_uart8"; - drive-strength = <8>; - bias-disable; - }; - - blsp2_uart8_pins_sleep: blsp2-uart8-pins-sleep { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - bt_pins: bt-pins { - hostwake { - pins = "gpio75"; - function = "gpio"; - drive-strength = <16>; - input-enable; - }; - - devwake { - pins = "gpio91"; - function = "gpio"; - drive-strength = <2>; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <4>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <4>; - bias-pull-up; - }; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk-cmd-data { - pins = "gpio35", "gpio36", "gpio37", "gpio38", - "gpio39", "gpio40"; - function = "sdc3"; - drive-strength = <8>; - bias-disable; - }; - }; - - sdhc2_cd_pin: sdhc2-cd { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc3_pin_a: sdhc3-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c6_pins: i2c6 { - mux { - pins = "gpio29", "gpio30"; - function = "blsp_i2c6"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c12_pins: i2c12 { - mux { - pins = "gpio87", "gpio88"; - function = "blsp_i2c12"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c_touchkey_pins: i2c-touchkey { - mux { - pins = "gpio95", "gpio96"; - function = "gpio"; - input-enable; - bias-pull-up; - }; - }; - - i2c_led_gpioex_pins: i2c-led-gpioex { - mux { - pins = "gpio120", "gpio121"; - function = "gpio"; - input-enable; - bias-pull-down; - }; - }; - - gpioex_pin: gpioex { - res { - pins = "gpio145"; - function = "gpio"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - wifi_pin: wifi { - int { - pins = "gpio92"; - function = "gpio"; - - input-enable; - bias-pull-down; - }; - }; - - panel_te_pin: panel { - te { - pins = "gpio12"; - function = "mdp_vsync"; - - drive-strength = <2>; - bias-disable; - }; - }; - }; - - sdhc_1: sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pma8084_l20>; - vqmmc-supply = <&pma8084_s4>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhc_2: sdhci@f9864900 { - status = "okay"; - - max-frequency = <100000000>; - - vmmc-supply = <&pma8084_l21>; - vqmmc-supply = <&pma8084_l13>; - - bus-width = <4>; - - /* cd-gpio is intentionally disabled. If enabled, an SD card - * present during boot is not initialized correctly. Without - * cd-gpios the driver resorts to polling, so hotplug works. - */ - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>; - // cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - }; - - sdhci@f98a4900 { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - max-frequency = <100000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc3_pin_a>; - - vmmc-supply = <&vreg_wlan>; - vqmmc-supply = <&pma8084_s4>; - - bus-width = <4>; - non-removable; - - wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - - interrupt-parent = <&msmgpio>; - interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; - }; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - /*extcon = <&smbb>, <&usb_id>;*/ - /*vbus-supply = <&chg_otg>;*/ - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pma8084_l6>; - v3p3-supply = <&pma8084_l24>; - - /*extcon = <&smbb>;*/ - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - i2c@f9924000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - - touchscreen@20 { - compatible = "syna,rmi4-i2c"; - reg = <0x20>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <8 IRQ_TYPE_EDGE_FALLING>; - - vdd-supply = <&max77826_ldo13>; - vio-supply = <&pma8084_lvs2>; - - pinctrl-names = "default"; - pinctrl-0 = <&touch_pin>; - - syna,startup-delay-ms = <100>; - - #address-cells = <1>; - #size-cells = <0>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - }; - }; - }; - - i2c@f9928000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; - - pmic@60 { - reg = <0x60>; - compatible = "maxim,max77826"; - - regulators { - max77826_ldo1: LDO1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - max77826_ldo2: LDO2 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - max77826_ldo3: LDO3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - max77826_ldo4: LDO4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo5: LDO5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo6: LDO6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo7: LDO7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo8: LDO8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo9: LDO9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo10: LDO10 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2950000>; - }; - - max77826_ldo11: LDO11 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2950000>; - }; - - max77826_ldo12: LDO12 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo13: LDO13 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo14: LDO14 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo15: LDO15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_buck: BUCK { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - max77826_buckboost: BUCKBOOST { - regulator-min-microvolt = <3400000>; - regulator-max-microvolt = <3400000>; - }; - }; - }; - }; - - i2c@f9968000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c12_pins>; - - fuelgauge@36 { - compatible = "maxim,max17048"; - reg = <0x36>; - - maxim,double-soc; - maxim,rcomp = /bits/ 8 <0x56>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&fuelgauge_pin>; - }; - }; - - adreno@fdb00000 { - status = "ok"; - }; - - mdss@fd900000 { - status = "ok"; - - mdp@fd900000 { - status = "ok"; - }; - - dsi@fd922800 { - status = "ok"; - - vdda-supply = <&pma8084_l2>; - vdd-supply = <&pma8084_l22>; - vddio-supply = <&pma8084_l12>; - - #address-cells = <1>; - #size-cells = <0>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; - - panel: panel@0 { - reg = <0>; - compatible = "samsung,s6e3fa2"; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_te_pin &panel_rst_pin>; - - iovdd-supply = <&pma8084_lvs4>; - vddr-supply = <&vreg_panel>; - - reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; - te-gpios = <&msmgpio 12 GPIO_ACTIVE_HIGH>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - }; - - dsi-phy@fd922a00 { - status = "ok"; - - vddio-supply = <&pma8084_l12>; - }; - }; - - remoteproc@fc880000 { - cx-supply = <&pma8084_s2>; - mss-supply = <&pma8084_s6>; - mx-supply = <&pma8084_s1>; - pll-supply = <&pma8084_l12>; - }; -}; - -&spmi_bus { - pma8084@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = ; - }; - - touchkey_pin: touchkey-int-pin { - pins = "gpio6"; - function = "normal"; - bias-disable; - input-enable; - power-source = ; - }; - - touch_pin: touchscreen-int-pin { - pins = "gpio8"; - function = "normal"; - bias-disable; - input-enable; - power-source = ; - }; - - panel_en_pin: panel-en-pin { - pins = "gpio14"; - function = "normal"; - bias-pull-up; - power-source = ; - qcom,drive-strength = ; - }; - - wlan_sleep_clk_pin: wlan-sleep-clk-pin { - pins = "gpio16"; - function = "func2"; - - output-high; - power-source = ; - qcom,drive-strength = ; - }; - - panel_rst_pin: panel-rst-pin { - pins = "gpio17"; - function = "normal"; - bias-disable; - power-source = ; - qcom,drive-strength = ; - }; - - - fuelgauge_pin: fuelgauge-int-pin { - pins = "gpio21"; - function = "normal"; - bias-disable; - input-enable; - power-source = ; - }; - }; - }; -}; diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-amami.dts b/dts/src/arm/qcom-msm8974-sony-xperia-amami.dts deleted file mode 100644 index 79e2cfbbb1..0000000000 --- a/dts/src/arm/qcom-msm8974-sony-xperia-amami.dts +++ /dev/null @@ -1,435 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include -#include -#include - -/ { - model = "Sony Xperia Z1 Compact"; - compatible = "sony,xperia-amami", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - }; - - memory@0 { - reg = <0 0x40000000>, <0x40000000 0x40000000>; - device_type = "memory"; - }; - - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - }; - - dma-controller@f9944000 { - qcom,controlled-remotely; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1300000>; - qcom,fast-charge-current-limit = <1300000>; - qcom,dc-current-limit = <1300000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio4", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = ; - }; - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; - - pm8941@1 { - wled@d800 { - status = "okay"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; - }; - }; -}; diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-castor.dts b/dts/src/arm/qcom-msm8974-sony-xperia-castor.dts deleted file mode 100644 index e66937e3f7..0000000000 --- a/dts/src/arm/qcom-msm8974-sony-xperia-castor.dts +++ /dev/null @@ -1,723 +0,0 @@ -#include "qcom-msm8974pro.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include -#include -#include - -/ { - model = "Sony Xperia Z2 Tablet"; - compatible = "sony,xperia-castor", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp2_uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - }; - - smd { - rpm { - rpm_requests { - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-system-load = <154000>; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-allow-set-load; - regulator-system-load = <500000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; - - vreg_bl_vddio: lcd-backlight-vddio { - compatible = "regulator-fixed"; - regulator-name = "vreg_bl_vddio"; - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - - gpio = <&msmgpio 69 0>; - enable-active-high; - - vin-supply = <&pm8941_s3>; - startup-delay-us = <70000>; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_backlight_en_pin_a>; - }; - - vreg_vsp: lcd-dcdc-regulator { - compatible = "regulator-fixed"; - regulator-name = "vreg_vsp"; - regulator-min-microvolt = <5600000>; - regulator-max-microvolt = <5600000>; - - gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_dcdc_en_pin_a>; - }; - - vreg_wlan: wlan-regulator { - compatible = "regulator-fixed"; - - regulator-name = "wl-reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_regulator_pin>; - }; -}; - -&soc { - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f9864900 { - status = "okay"; - - max-frequency = <100000000>; - non-removable; - vmmc-supply = <&vreg_wlan>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc3_pin_a>; - - #address-cells = <1>; - #size-cells = <0>; - - bcrmf@1 { - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; - reg = <1>; - - brcm,drive-strength = <10>; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin>; - }; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - serial@f995d000 { - status = "ok"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart7_pin_a>; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <3000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_pin>, - <&bt_dev_wake_pin>, - <&bt_reg_on_pin>; - - host-wakeup-gpios = <&msmgpio 95 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&msmgpio 96 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; - }; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - blsp2_uart7_pin_a: blsp2-uart7-pin-active { - tx { - pins = "gpio41"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio42"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-pull-up; - }; - - cts { - pins = "gpio43"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-pull-up; - }; - - rts { - pins = "gpio44"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c8_pins: i2c8 { - mux { - pins = "gpio47", "gpio48"; - function = "blsp_i2c8"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; - - drive-strength = <2>; - bias-disable; - }; - }; - - lcd_backlight_en_pin_a: lcd-backlight-vddio { - pins = "gpio69"; - drive-strength = <10>; - output-low; - bias-disable; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - sdhc3_pin_a: sdhc3-pin-active { - clk { - pins = "gpio40"; - function = "sdc3"; - - drive-strength = <10>; - bias-disable; - }; - - cmd { - pins = "gpio39"; - function = "sdc3"; - - drive-strength = <10>; - bias-pull-up; - }; - - data { - pins = "gpio35", "gpio36", "gpio37", "gpio38"; - function = "sdc3"; - - drive-strength = <10>; - bias-pull-up; - }; - }; - - ts_int_pin: synaptics { - pin { - pins = "gpio86"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - input-enable; - }; - }; - - bt_host_wake_pin: bt-host-wake { - pins = "gpio95"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - output-low; - }; - - bt_dev_wake_pin: bt-dev-wake { - pins = "gpio96"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c@f9964000 { - status = "okay"; - - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c8_pins>; - - synaptics@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - - interrupt-parent = <&msmgpio>; - interrupts = <86 IRQ_TYPE_EDGE_FALLING>; - - #address-cells = <1>; - #size-cells = <0>; - - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_pin>; - - syna,startup-delay-ms = <10>; - - rmi-f01@1 { - reg = <0x1>; - syna,nosleep = <1>; - }; - - rmi-f11@11 { - reg = <0x11>; - syna,f11-flip-x = <1>; - syna,sensor-type = <1>; - }; - }; - }; - - i2c@f9967000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_pins>; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - lp8566_wled: backlight@2c { - compatible = "ti,lp8556"; - reg = <0x2c>; - power-supply = <&vreg_bl_vddio>; - - bl-name = "backlight"; - dev-ctrl = /bits/ 8 <0x05>; - init-brt = /bits/ 8 <0x3f>; - rom_a0h { - rom-addr = /bits/ 8 <0xa0>; - rom-val = /bits/ 8 <0xff>; - }; - rom_a1h { - rom-addr = /bits/ 8 <0xa1>; - rom-val = /bits/ 8 <0x3f>; - }; - rom_a2h { - rom-addr = /bits/ 8 <0xa2>; - rom-val = /bits/ 8 <0x20>; - }; - rom_a3h { - rom-addr = /bits/ 8 <0xa3>; - rom-val = /bits/ 8 <0x5e>; - }; - rom_a4h { - rom-addr = /bits/ 8 <0xa4>; - rom-val = /bits/ 8 <0x02>; - }; - rom_a5h { - rom-addr = /bits/ 8 <0xa5>; - rom-val = /bits/ 8 <0x04>; - }; - rom_a6h { - rom-addr = /bits/ 8 <0xa6>; - rom-val = /bits/ 8 <0x80>; - }; - rom_a7h { - rom-addr = /bits/ 8 <0xa7>; - rom-val = /bits/ 8 <0xf7>; - }; - rom_a9h { - rom-addr = /bits/ 8 <0xa9>; - rom-val = /bits/ 8 <0x80>; - }; - rom_aah { - rom-addr = /bits/ 8 <0xaa>; - rom-val = /bits/ 8 <0x0f>; - }; - rom_aeh { - rom-addr = /bits/ 8 <0xae>; - rom-val = /bits/ 8 <0x0f>; - }; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1500000>; - qcom,fast-charge-current-limit = <1500000>; - qcom,dc-current-limit = <1800000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = ; - }; - - bt_reg_on_pin: bt-reg-on { - pins = "gpio16"; - function = "normal"; - - output-low; - power-source = ; - }; - - wlan_sleep_clk_pin: wl-sleep-clk { - pins = "gpio17"; - function = "func2"; - - output-high; - power-source = ; - }; - - wlan_regulator_pin: wl-reg-active { - pins = "gpio18"; - function = "normal"; - - bias-disable; - power-source = ; - }; - - lcd_dcdc_en_pin_a: lcd-dcdc-en-active { - pins = "gpio20"; - function = "normal"; - - bias-disable; - power-source = ; - input-disable; - output-low; - }; - - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; -}; diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-honami.dts b/dts/src/arm/qcom-msm8974-sony-xperia-honami.dts deleted file mode 100644 index a62e5c25b2..0000000000 --- a/dts/src/arm/qcom-msm8974-sony-xperia-honami.dts +++ /dev/null @@ -1,484 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include -#include -#include - -/ { - model = "Sony Xperia Z1"; - compatible = "sony,xperia-honami", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - }; - - memory@0 { - reg = <0 0x40000000>, <0x40000000 0x40000000>; - device_type = "memory"; - }; - - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - i2c@f9924000 { - status = "okay"; - - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - - synaptics@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - - interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; - - #address-cells = <1>; - #size-cells = <0>; - - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_pin>; - - syna,startup-delay-ms = <10>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-x; - syna,sensor-type = <1>; - }; - }; - }; - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - ts_int_pin: touch-int { - pin { - pins = "gpio61"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - input-enable; - }; - }; - }; - - dma-controller@f9944000 { - qcom,controlled-remotely; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1500000>; - qcom,fast-charge-current-limit = <1500000>; - qcom,dc-current-limit = <1800000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio4", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = ; - }; - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; - - pm8941@1 { - wled@d800 { - status = "okay"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; - }; - }; -}; diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-rhine-amami.dts b/dts/src/arm/qcom-msm8974-sony-xperia-rhine-amami.dts new file mode 100644 index 0000000000..68d5626bf4 --- /dev/null +++ b/dts/src/arm/qcom-msm8974-sony-xperia-rhine-amami.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974-sony-xperia-rhine.dtsi" + +/ { + model = "Sony Xperia Z1 Compact"; + compatible = "sony,xperia-amami", "qcom,msm8974"; +}; + +&smbb { + qcom,fast-charge-safe-current = <1300000>; + qcom,fast-charge-current-limit = <1300000>; + qcom,dc-current-limit = <1300000>; +}; diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-rhine-honami.dts b/dts/src/arm/qcom-msm8974-sony-xperia-rhine-honami.dts new file mode 100644 index 0000000000..ea6a941d8f --- /dev/null +++ b/dts/src/arm/qcom-msm8974-sony-xperia-rhine-honami.dts @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974-sony-xperia-rhine.dtsi" + +/ { + model = "Sony Xperia Z1"; + compatible = "sony,xperia-honami", "qcom,msm8974"; +}; diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-rhine.dtsi b/dts/src/arm/qcom-msm8974-sony-xperia-rhine.dtsi new file mode 100644 index 0000000000..1d21de46f8 --- /dev/null +++ b/dts/src/arm/qcom-msm8974-sony-xperia-rhine.dtsi @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include +#include + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@3e8e0000 { + compatible = "ramoops"; + reg = <0x3e8e0000 0x200000>; + + console-size = <0x100000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x80000>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + clock-frequency = <355000>; + + nfc@28 { + compatible = "nxp,pn544-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <59 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&pm8941_gpios 23 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_dma { + qcom,controlled-remotely; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + /* sii8334 MHL HDMI bridge */ +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_coincell { + status = "okay"; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = ; + }; +}; + +&pm8941_wled { + status = "okay"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; +}; + +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s4: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; +}; + +&tlmm { + ts_int_pin: touch-int { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc-on { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/dts/src/arm/qcom-msm8974.dtsi b/dts/src/arm/qcom-msm8974.dtsi index 412d94736c..814ad0b462 100644 --- a/dts/src/arm/qcom-msm8974.dtsi +++ b/dts/src/arm/qcom-msm8974.dtsi @@ -12,61 +12,19 @@ / { #address-cells = <1>; #size-cells = <1>; - model = "Qualcomm MSM8974"; - compatible = "qcom,msm8974"; interrupt-parent = <&intc>; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mpss_region: mpss@8000000 { - reg = <0x08000000 0x5100000>; - no-map; - }; - - mba_region: mba@d100000 { - reg = <0x0d100000 0x100000>; - no-map; - }; - - wcnss_region: wcnss@d200000 { - reg = <0x0d200000 0xa00000>; - no-map; - }; - - adsp_region: adsp@dc00000 { - reg = <0x0dc00000 0x1900000>; - no-map; - }; - - venus@f500000 { - reg = <0x0f500000 0x500000>; - no-map; - }; - - smem_region: smem@fa00000 { - reg = <0xfa00000 0x200000>; - no-map; - }; - - tz@fc00000 { - reg = <0x0fc00000 0x160000>; - no-map; - }; - - rfsa@fd60000 { - reg = <0x0fd60000 0x20000>; - no-map; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; }; - rmtfs@fd80000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0fd80000 0x180000>; - no-map; - - qcom,client-id = <1>; + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; }; @@ -136,283 +94,120 @@ }; }; + firmware { + scm { + compatible = "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + memory { device_type = "memory"; reg = <0x0 0x0>; }; - thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + pmu { + compatible = "qcom,krait-pmu"; + interrupts = ; + }; - thermal-sensors = <&tsens 5>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; - trips { - cpu_alert0: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit0: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; + mpss_region: mpss@8000000 { + reg = <0x08000000 0x5100000>; + no-map; }; - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + mba_region: mba@d100000 { + reg = <0x0d100000 0x100000>; + no-map; + }; - thermal-sensors = <&tsens 6>; + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0xa00000>; + no-map; + }; - trips { - cpu_alert1: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit1: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; }; - cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + venus_region: memory@f500000 { + reg = <0x0f500000 0x500000>; + no-map; + }; - thermal-sensors = <&tsens 7>; + smem_region: smem@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; + }; - trips { - cpu_alert2: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit2: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; + tz_region: memory@fc00000 { + reg = <0x0fc00000 0x160000>; + no-map; }; - cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + rfsa_mem: memory@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; + }; - thermal-sensors = <&tsens 8>; + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; - trips { - cpu_alert3: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit3: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; + qcom,client-id = <1>; }; + }; - q6-dsp-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 1>; + smem { + compatible = "qcom,smem"; - trips { - q6_dsp_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; - modemtx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + hwlocks = <&tcsr_mutex 3>; + }; - thermal-sensors = <&tsens 2>; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; - trips { - modemtx_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; + interrupt-parent = <&intc>; + interrupts = ; - video-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + qcom,ipc = <&apcs 8 10>; - thermal-sensors = <&tsens 3>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; - trips { - video_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; }; - wlan-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 4>; + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; - trips { - wlan_alert0: trip-point0 { - temperature = <105000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + interrupt-controller; + #interrupt-cells = <2>; }; + }; - gpu-top-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; - thermal-sensors = <&tsens 9>; + interrupt-parent = <&intc>; + interrupts = ; - trips { - gpu1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - gpu-bottom-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 10>; - - trips { - gpu2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - }; - - cpu-pmu { - compatible = "qcom,krait-pmu"; - interrupts = ; - }; - - clocks { - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - }; - - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = , - , - , - ; - clock-frequency = <19200000>; - }; - - adsp-pil { - compatible = "qcom,msm8974-adsp-pil"; - - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - cx-supply = <&pm8841_s2>; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&adsp_region>; - - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - smd-edge { - interrupts = ; - - qcom,ipc = <&apcs 8 8>; - qcom,smd-edge = <1>; - - label = "lpass"; - }; - }; - - smem { - compatible = "qcom,smem"; - - memory-region = <&smem_region>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - - hwlocks = <&tcsr_mutex 3>; - }; - - smp2p-adsp { - compatible = "qcom,smp2p"; - qcom,smem = <443>, <429>; - - interrupt-parent = <&intc>; - interrupts = ; - - qcom,ipc = <&apcs 8 10>; - - qcom,local-pid = <0>; - qcom,remote-pid = <2>; - - adsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - adsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-modem { - compatible = "qcom,smp2p"; - qcom,smem = <435>, <428>; - - interrupt-parent = <&intc>; - interrupts = ; - - qcom,ipc = <&apcs 8 14>; + qcom,ipc = <&apcs 8 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -497,11 +292,23 @@ }; }; - firmware { - scm { - compatible = "qcom,scm"; - clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; - clock-names = "core", "bus", "iface"; + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = ; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; }; }; @@ -524,31 +331,6 @@ reg = <0xf9011000 0x1000>; }; - qfprom: qfprom@fc4bc000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; - tsens_calib: calib@d0 { - reg = <0xd0 0x18>; - }; - tsens_backup: backup@440 { - reg = <0x440 0x10>; - }; - }; - - tsens: thermal-sensor@fc4a9000 { - compatible = "qcom,msm8974-tsens"; - reg = <0xfc4a9000 0x1000>, /* TM */ - <0xfc4a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_calib>, <&tsens_backup>; - nvmem-cell-names = "calib", "calib_backup"; - #qcom,sensors = <11>; - interrupts = ; - interrupt-names = "uplow"; - #thermal-sensor-cells = <1>; - }; - timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -654,95 +436,7 @@ reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; - - gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-msm8974"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x4000>; - }; - - tcsr: syscon@fd4a0000 { - compatible = "syscon"; - reg = <0xfd4a0000 0x10000>; - }; - - tcsr_mutex_block: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; - }; - - mmcc: clock-controller@fd8c0000 { - compatible = "qcom,mmcc-msm8974"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfd8c0000 0x6000>; - }; - - tcsr_mutex: tcsr-mutex { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_block 0 0x80>; - - #hwlock-cells = <1>; - }; - - rpm_msg_ram: memory@fc428000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0xfc428000 0x4000>; - }; - - blsp1_uart1: serial@f991d000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf991d000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - blsp1_uart2: serial@f991e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf991e000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - blsp2_uart7: serial@f995d000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf995d000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - blsp2_uart8: serial@f995e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf995e000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - blsp2_uart10: serial@f9960000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf9960000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - sdhci@f9824900 { + sdhc_1: sdhci@f9824900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -753,10 +447,13 @@ <&gcc GCC_SDCC1_AHB_CLK>, <&xo_board>; clock-names = "core", "iface", "xo"; + bus-width = <8>; + non-removable; + status = "disabled"; }; - sdhci@f9864900 { + sdhc_3: sdhci@f9864900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -767,10 +464,15 @@ <&gcc GCC_SDCC3_AHB_CLK>, <&xo_board>; clock-names = "core", "iface", "xo"; + bus-width = <4>; + + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - sdhci@f98a4900 { + sdhc_2: sdhci@f98a4900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -781,27 +483,184 @@ <&gcc GCC_SDCC2_AHB_CLK>, <&xo_board>; clock-names = "core", "iface", "xo"; + bus-width = <4>; + + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - otg: usb@f9a55000 { - compatible = "qcom,ci-hdrc"; - reg = <0xf9a55000 0x200>, - <0xf9a55200 0x200>; - interrupts = ; - clocks = <&gcc GCC_USB_HS_AHB_CLK>, - <&gcc GCC_USB_HS_SYSTEM_CLK>; - clock-names = "iface", "core"; - assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; - assigned-clock-rates = <75000000>; - resets = <&gcc GCC_USB_HS_BCR>; - reset-names = "core"; - phy_type = "ulpi"; - dr_mode = "otg"; - ahb-burst-config = <0>; - phy-names = "usb-phy"; + blsp1_uart1: serial@f991d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991d000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; status = "disabled"; - #reset-cells = <1>; + }; + + blsp1_uart2: serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_i2c1: i2c@f9923000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c2: i2c@f9924000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9924000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c3: i2c@f9925000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c6: i2c@f9928000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9928000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp2_uart1: serial@f995d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995d000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_uart2: serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_uart4: serial@f9960000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf9960000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_i2c2: i2c@f9964000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9964000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c5: i2c@f9967000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9967000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c5_default>; + pinctrl-1 = <&blsp2_i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c6: i2c@f9968000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9968000 0x1000>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + + otg: usb@f9a55000 { + compatible = "qcom,ci-hdrc"; + reg = <0xf9a55000 0x200>, + <0xf9a55200 0x200>; + interrupts = ; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <75000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; ulpi { usb_hs1_phy: phy@a { @@ -835,55 +694,6 @@ clock-names = "core"; }; - remoteproc@fc880000 { - compatible = "qcom,msm8974-mss-pil"; - reg = <0xfc880000 0x100>, <0xfc820000 0x020>; - reg-names = "qdsp6", "rmb"; - - interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, - <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>, - <&xo_board>; - clock-names = "iface", "bus", "mem", "xo"; - - resets = <&gcc GCC_MSS_RESTART>; - reset-names = "mss_restart"; - - cx-supply = <&pm8841_s2>; - mss-supply = <&pm8841_s3>; - mx-supply = <&pm8841_s1>; - pll-supply = <&pm8941_l12>; - - qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - mba { - memory-region = <&mba_region>; - }; - - mpss { - memory-region = <&mpss_region>; - }; - - smd-edge { - interrupts = ; - - qcom,ipc = <&apcs 8 12>; - qcom,smd-edge = <0>; - - label = "modem"; - }; - }; - pronto: remoteproc@fb21b000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; @@ -898,8 +708,6 @@ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - vddpx-supply = <&pm8941_s3>; - qcom,smem-states = <&wcnss_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -910,11 +718,6 @@ clocks = <&rpmcc RPM_SMD_CXO_A2>; clock-names = "xo"; - - vddxo-supply = <&pm8941_l6>; - vddrfa-supply = <&pm8941_l11>; - vddpa-supply = <&pm8941_l19>; - vdddig-supply = <&pm8941_s3>; }; smd-edge { @@ -942,150 +745,43 @@ interrupt-names = "tx", "rx"; qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; - qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; }; }; }; }; - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8974-pinctrl"; - reg = <0xfd510000 0x4000>; - gpio-controller; - gpio-ranges = <&msmgpio 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = ; - }; + etf@fc307000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc307000 0x1000>; - i2c@f9923000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9923000 0x1000>; - interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - i2c@f9924000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9924000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; - blsp_i2c3: i2c@f9925000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9925000 0x1000>; - interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&merger_out>; + }; + }; + }; }; - blsp_i2c6: i2c@f9928000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9928000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; + tpiu@fc318000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0xfc318000 0x1000>; - blsp_i2c8: i2c@f9964000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9964000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp_i2c11: i2c@f9967000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9967000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; - dma-names = "tx", "rx"; - }; - - blsp_i2c12: i2c@f9968000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9968000 0x1000>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spmi_bus: spmi@fc4cf000 { - compatible = "qcom,spmi-pmic-arb"; - reg-names = "core", "intr", "cnfg"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - interrupt-names = "periph_irq"; - interrupts = ; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - blsp2_dma: dma-controller@f9944000 { - compatible = "qcom,bam-v1.4.0"; - reg = <0xf9944000 0x19000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - etr@fc322000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0xfc322000 0x1000>; - - clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - in-ports { - port { - etr_in: endpoint { - remote-endpoint = <&replicator_out0>; - }; - }; - }; - }; - - tpiu@fc318000 { - compatible = "arm,coresight-tpiu", "arm,primecell"; - reg = <0xfc318000 0x1000>; - - clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; in-ports { port { @@ -1096,59 +792,39 @@ }; }; - replicator@fc31c000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0xfc31c000 0x1000>; + funnel@fc31a000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc31a000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - out-ports { + in-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { - reg = <0>; - replicator_out0: endpoint { - remote-endpoint = <&etr_in>; - }; - }; - port@1 { - reg = <1>; - replicator_out1: endpoint { - remote-endpoint = <&tpiu_in>; - }; - }; - }; - - in-ports { - port { - replicator_in: endpoint { - remote-endpoint = <&etf_out>; + /* + * Not described input ports: + * 0 - not-connected + * 1 - connected trought funnel to Multimedia CPU + * 2 - connected to Wireless CPU + * 3 - not-connected + * 4 - not-connected + * 6 - not-connected + * 7 - connected to STM + */ + port@5 { + reg = <5>; + funnel1_in5: endpoint { + remote-endpoint = <&kpss_out>; }; }; }; - }; - - etf@fc307000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0xfc307000 0x1000>; - - clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; out-ports { port { - etf_out: endpoint { - remote-endpoint = <&replicator_in>; - }; - }; - }; - - in-ports { - port { - etf_in: endpoint { - remote-endpoint = <&merger_out>; + funnel1_out: endpoint { + remote-endpoint = <&merger_in1>; }; }; }; @@ -1188,85 +864,51 @@ }; }; - funnel@fc31a000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0xfc31a000 0x1000>; + replicator@fc31c000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0xfc31c000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - in-ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* - * Not described input ports: - * 0 - not-connected - * 1 - connected trought funnel to Multimedia CPU - * 2 - connected to Wireless CPU - * 3 - not-connected - * 4 - not-connected - * 6 - not-connected - * 7 - connected to STM - */ - port@5 { - reg = <5>; - funnel1_in5: endpoint { - remote-endpoint = <&kpss_out>; + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; }; }; }; - out-ports { + in-ports { port { - funnel1_out: endpoint { - remote-endpoint = <&merger_in1>; + replicator_in: endpoint { + remote-endpoint = <&etf_out>; }; }; }; }; - funnel@fc345000 { /* KPSS funnel only 4 inputs are used */ - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0xfc345000 0x1000>; + etr@fc322000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc322000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - kpss_in0: endpoint { - remote-endpoint = <&etm0_out>; - }; - }; - port@1 { - reg = <1>; - kpss_in1: endpoint { - remote-endpoint = <&etm1_out>; - }; - }; - port@2 { - reg = <2>; - kpss_in2: endpoint { - remote-endpoint = <&etm2_out>; - }; - }; - port@3 { - reg = <3>; - kpss_in3: endpoint { - remote-endpoint = <&etm3_out>; - }; - }; - }; - - out-ports { port { - kpss_out: endpoint { - remote-endpoint = <&funnel1_in5>; + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; }; }; }; @@ -1344,31 +986,72 @@ }; }; - ocmem@fdd00000 { - compatible = "qcom,msm8974-ocmem"; - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x180000>; - reg-names = "ctrl", - "mem"; - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&mmcc OCMEMCX_OCMEMNOC_CLK>; - clock-names = "core", - "iface"; + /* KPSS funnel, only 4 inputs are used */ + funnel@fc345000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc345000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - gmu_sram: gmu-sram@0 { - reg = <0x0 0x100000>; + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + kpss_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + kpss_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + kpss_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + kpss_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; }; - }; - bimc: interconnect@fc380000 { - reg = <0xfc380000 0x6a000>; - compatible = "qcom,msm8974-bimc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + out-ports { + port { + kpss_out: endpoint { + remote-endpoint = <&funnel1_in5>; + }; + }; + }; + }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x4000>; + }; + + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + + bimc: interconnect@fc380000 { + reg = <0xfc380000 0x6a000>; + compatible = "qcom,msm8974-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, <&rpmcc RPM_SMD_BIMC_A_CLK>; }; @@ -1417,94 +1100,378 @@ <&rpmcc RPM_SMD_CNOC_A_CLK>; }; - gpu: adreno@fdb00000 { - status = "disabled"; + tsens: thermal-sensor@fc4a9000 { + compatible = "qcom,msm8974-tsens"; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + #qcom,sensors = <11>; + interrupts = ; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; - compatible = "qcom,adreno-330.1", - "qcom,adreno"; - reg = <0xfdb00000 0x10000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = ; - interrupt-names = "kgsl_3d0_irq"; - clock-names = "core", - "iface", - "mem_iface"; - clocks = <&mmcc OXILI_GFX3D_CLK>, - <&mmcc OXILICX_AHB_CLK>, - <&mmcc OXILICX_AXI_CLK>; - sram = <&gmu_sram>; - power-domains = <&mmcc OXILICX_GDSC>; - operating-points-v2 = <&gpu_opp_table>; + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; - interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, - <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; - interconnect-names = "gfx-mem", - "ocmem"; + qfprom: qfprom@fc4bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + tsens_calib: calib@d0 { + reg = <0xd0 0x18>; + }; + tsens_backup: backup@440 { + reg = <0x440 0x10>; + }; + }; - // iommus = <&gpu_iommu 0>; + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; - gpu_opp_table: opp_table { - compatible = "operating-points-v2"; + remoteproc_mss: remoteproc@fc880000 { + compatible = "qcom,msm8974-mss-pil"; + reg = <0xfc880000 0x100>, <0xfc820000 0x020>; + reg-names = "qdsp6", "rmb"; - opp-320000000 { - opp-hz = /bits/ 64 <320000000>; + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + smd-edge { + interrupts = ; + + qcom,ipc = <&apcs 8 12>; + qcom,smd-edge = <0>; + + label = "modem"; + }; + }; + + tcsr_mutex_block: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + + tcsr: syscon@fd4a0000 { + compatible = "syscon"; + reg = <0xfd4a0000 0x10000>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = ; + + sdc1_off: sdc1-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; }; - opp-27000000 { - opp-hz = /bits/ 64 <27000000>; + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; + }; + + blsp1_uart2_active: blsp1-uart2-active { + rx { + pins = "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio4"; + function = "blsp_uart2"; + drive-strength = <4>; + bias-disable; + }; + }; + + blsp2_uart1_active: blsp2-uart1-active { + tx-rts { + pins = "gpio41", "gpio44"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts { + pins = "gpio42", "gpio43"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp2_uart1_sleep: blsp2-uart1-sleep { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart4_active: blsp2-uart4-active { + tx-rts { + pins = "gpio53", "gpio56"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts { + pins = "gpio54", "gpio55"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp1_i2c1_default: blsp1-i2c1-default { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c1_sleep: blsp1-i2c1-sleep { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c2_default: blsp1-i2c2-default { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c3_default: blsp1-i2c3-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP1_I2C4 info is missing */ + + /* BLSP1_I2C5 info is missing */ + + blsp1_i2c6_default: blsp1-i2c6-default { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-pull-up; + }; + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ + + /* BLSP2_I2C1 info is missing */ + + blsp2_i2c2_default: blsp2-i2c2-default { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP2_I2C3 info is missing */ + + /* BLSP2_I2C4 info is missing */ + + blsp2_i2c5_default: blsp2-i2c5-default { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_sleep: blsp2-i2c5-sleep { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP2_I2C6 info is missing - nobody uses it though? */ + + spi8_default: spi8_default { + mosi { + pins = "gpio45"; + function = "blsp_spi8"; + }; + miso { + pins = "gpio46"; + function = "blsp_spi8"; + }; + cs { + pins = "gpio47"; + function = "blsp_spi8"; + }; + clk { + pins = "gpio48"; + function = "blsp_spi8"; }; }; }; - mdss: mdss@fd900000 { - status = "disabled"; + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfd8c0000 0x6000>; + }; + mdss: mdss@fd900000 { compatible = "qcom,mdss"; - reg = <0xfd900000 0x100>, - <0xfd924000 0x1000>; - reg-names = "mdss_phys", - "vbif_phys"; + reg = <0xfd900000 0x100>, <0xfd924000 0x1000>; + reg-names = "mdss_phys", "vbif_phys"; power-domains = <&mmcc MDSS_GDSC>; clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "vsync"; + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "vsync"; interrupts = ; interrupt-controller; #interrupt-cells = <1>; + status = "disabled"; + #address-cells = <1>; #size-cells = <1>; ranges; mdp: mdp@fd900000 { - status = "disabled"; - compatible = "qcom,mdp5"; reg = <0xfd900100 0x22000>; reg-names = "mdp_phys"; interrupt-parent = <&mdss>; - interrupts = <0 0>; + interrupts = <0>; clocks = <&mmcc MDSS_AHB_CLK>, <&mmcc MDSS_AXI_CLK>, <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "core", - "vsync"; + clock-names = "iface", "bus", "core", "vsync"; interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>; interconnect-names = "mdp0-mem"; @@ -1523,38 +1490,39 @@ }; dsi0: dsi@fd922800 { - status = "disabled"; - compatible = "qcom,mdss-dsi-ctrl"; reg = <0xfd922800 0x1f8>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; - assigned-clocks = <&mmcc BYTE0_CLK_SRC>, - <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi_phy0 0>, - <&dsi_phy0 1>; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; clocks = <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_BYTE0_CLK>, - <&mmcc MDSS_PCLK0_CLK>, - <&mmcc MDSS_ESC0_CLK>, - <&mmcc MMSS_MISC_AHB_CLK>; + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>; clock-names = "mdp_core", - "iface", - "bus", - "byte", - "pixel", - "core", - "core_mmss"; - - phys = <&dsi_phy0>; + "iface", + "bus", + "byte", + "pixel", + "core", + "core_mmss"; + + phys = <&dsi0_phy>; phy-names = "dsi-phy"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1574,28 +1542,115 @@ }; }; - dsi_phy0: dsi-phy@fd922a00 { - status = "disabled"; - + dsi0_phy: dsi-phy@fd922a00 { compatible = "qcom,dsi-phy-28nm-hpm"; reg = <0xfd922a00 0xd4>, <0xfd922b00 0x280>, <0xfd922d80 0x30>; reg-names = "dsi_pll", - "dsi_phy", - "dsi_phy_regulator"; + "dsi_phy", + "dsi_phy_regulator"; #clock-cells = <1>; #phy-cells = <0>; - qcom,dsi-phy-index = <0>; clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; clock-names = "iface", "ref"; + + status = "disabled"; }; }; - imem@fe805000 { + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-330.1", "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = ; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + clock-names = "core", "iface", "mem_iface"; + + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, + <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; + interconnect-names = "gfx-mem", "ocmem"; + + // iommus = <&gpu_iommu 0>; + status = "disabled"; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; + }; + }; + }; + + ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", "mem"; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + + remoteproc_adsp: remoteproc@fe200000 { + compatible = "qcom,msm8974-adsp-pil"; + reg = <0xfe200000 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + smd-edge { + interrupts = ; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + label = "lpass"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + imem: imem@fe805000 { compatible = "syscon", "simple-mfd"; reg = <0xfe805000 0x1000>; @@ -1606,76 +1661,194 @@ }; }; - smd { - compatible = "qcom,smd"; + tcsr_mutex: tcsr-mutex { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_block 0 0x80>; - rpm { - interrupts = ; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; + #hwlock-cells = <1>; + }; - rpm_requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; - #clock-cells = <1>; + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; - pm8841-regulators { - compatible = "qcom,rpm-pm8841-regulators"; - - pm8841_s1: s1 {}; - pm8841_s2: s2 {}; - pm8841_s3: s3 {}; - pm8841_s4: s4 {}; - pm8841_s5: s5 {}; - pm8841_s6: s6 {}; - pm8841_s7: s7 {}; - pm8841_s8: s8 {}; + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; + }; + }; + + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - pm8941-regulators { - compatible = "qcom,rpm-pm8941-regulators"; - - pm8941_s1: s1 {}; - pm8941_s2: s2 {}; - pm8941_s3: s3 {}; - - pm8941_l1: l1 {}; - pm8941_l2: l2 {}; - pm8941_l3: l3 {}; - pm8941_l4: l4 {}; - pm8941_l5: l5 {}; - pm8941_l6: l6 {}; - pm8941_l7: l7 {}; - pm8941_l8: l8 {}; - pm8941_l9: l9 {}; - pm8941_l10: l10 {}; - pm8941_l11: l11 {}; - pm8941_l12: l12 {}; - pm8941_l13: l13 {}; - pm8941_l14: l14 {}; - pm8941_l15: l15 {}; - pm8941_l16: l16 {}; - pm8941_l17: l17 {}; - pm8941_l18: l18 {}; - pm8941_l19: l19 {}; - pm8941_l20: l20 {}; - pm8941_l21: l21 {}; - pm8941_l22: l22 {}; - pm8941_l23: l23 {}; - pm8941_l24: l24 {}; - - pm8941_lvs1: lvs1 {}; - pm8941_lvs2: lvs2 {}; - pm8941_lvs3: lvs3 {}; + thermal-sensors = <&tsens 2>; + + trips { + modemtx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + video_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + wlan_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; }; }; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + clock-frequency = <19200000>; + }; + vreg_boost: vreg-boost { compatible = "regulator-fixed"; @@ -1692,6 +1865,7 @@ pinctrl-names = "default"; pinctrl-0 = <&boost_bypass_n_pin>; }; + vreg_vph_pwr: vreg-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph-pwr"; diff --git a/dts/src/arm/qcom-msm8974pro-fairphone-fp2.dts b/dts/src/arm/qcom-msm8974pro-fairphone-fp2.dts new file mode 100644 index 0000000000..58cb2ce1e4 --- /dev/null +++ b/dts/src/arm/qcom-msm8974pro-fairphone-fp2.dts @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include +#include + +/ { + model = "Fairphone 2"; + compatible = "fairphone,fp2", "qcom,msm8974"; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + vcc-supply = <&pm8941_l18>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@41 { + compatible = "ilitek,ili2120"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&imem { + reboot-mode { + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio1", "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = ; + }; +}; + +&pronto { + status = "okay"; + + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + iris { + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + + smd-edge { + qcom,remote-pid = <4>; + label = "pronto"; + + wcnss { + status = "okay"; + }; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; +}; + +&remoteproc_mss { + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; +}; + +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&smbb { + usb-charge-current-limit = <1500000>; + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,fast-charge-safe-voltage = <4380000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4240000>; + qcom,minimum-input-voltage = <4450000>; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-pin-active { + wlan { + pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "wlan"; + + drive-strength = <6>; + bias-pull-down; + }; + + bt { + pins = "gpio35", "gpio43", "gpio44"; + function = "bt"; + + drive-strength = <2>; + bias-pull-down; + }; + + fm { + pins = "gpio41", "gpio42"; + function = "fm"; + + drive-strength = <2>; + bias-pull-down; + }; + }; +}; diff --git a/dts/src/arm/qcom-msm8974pro-samsung-klte.dts b/dts/src/arm/qcom-msm8974pro-samsung-klte.dts new file mode 100644 index 0000000000..d6b2300a82 --- /dev/null +++ b/dts/src/arm/qcom-msm8974pro-samsung-klte.dts @@ -0,0 +1,813 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pma8084.dtsi" +#include +#include +#include + +/ { + model = "Samsung Galaxy S5"; + compatible = "samsung,klte", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart1; + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_3; /* SDC2 SD card slot */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + debounce-interval = <15>; + }; + + home-key { + label = "home_key"; + gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + debounce-interval = <15>; + }; + }; + + i2c-gpio-touchkey { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_touchkey_pins>; + + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_pin>; + + vcc-supply = <&max77826_ldo15>; + vdd-supply = <&pma8084_l19>; + + linux,keycodes = ; + }; + }; + + i2c-gpio-led { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_led_gpioex_pins>; + + i2c-gpio,delay-us = <2>; + + gpio_expander: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + + gpio-controller; + #gpio-cells = <2>; + + vcc-supply = <&pma8084_s4>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioex_pin>; + + reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + }; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = ; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = ; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = ; + }; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vreg_panel: panel-regulator { + compatible = "regulator-fixed"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_en_pin>; + + regulator-name = "panel-vddr-reg"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /delete-node/ vreg-boost; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&max77826_ldo13>; + vio-supply = <&pma8084_lvs2>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + syna,startup-delay-ms = <100>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + pmic@60 { + reg = <0x60>; + compatible = "maxim,max77826"; + + regulators { + max77826_ldo1: LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo2: LDO2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + max77826_ldo3: LDO3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo4: LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo5: LDO5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo6: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo7: LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo8: LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo9: LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo10: LDO10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo11: LDO11 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo12: LDO12 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo13: LDO13 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo14: LDO14 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo15: LDO15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_buck: BUCK { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + max77826_buckboost: BUCKBOOST { + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c6 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + }; +}; + +&blsp2_uart2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_pins_active>; + pinctrl-1 = <&blsp2_uart2_pins_sleep>; + + bluetooth { + compatible = "brcm,bcm43540-bt"; + max-speed = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&tlmm>; + interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + }; +}; + +&dsi0 { + status = "okay"; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + panel: panel@0 { + reg = <0>; + compatible = "samsung,s6e3fa2"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_te_pin &panel_rst_pin>; + + iovdd-supply = <&pma8084_lvs4>; + vddr-supply = <&vreg_panel>; + + reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; + te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + + vddio-supply = <&pma8084_l12>; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pma8084_l6>; + v3p3-supply = <&pma8084_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pma8084_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = ; + }; + + touchkey_pin: touchkey-int-pin { + pins = "gpio6"; + function = "normal"; + bias-disable; + input-enable; + power-source = ; + }; + + touch_pin: touchscreen-int-pin { + pins = "gpio8"; + function = "normal"; + bias-disable; + input-enable; + power-source = ; + }; + + panel_en_pin: panel-en-pin { + pins = "gpio14"; + function = "normal"; + bias-pull-up; + power-source = ; + qcom,drive-strength = ; + }; + + wlan_sleep_clk_pin: wlan-sleep-clk-pin { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = ; + qcom,drive-strength = ; + }; + + panel_rst_pin: panel-rst-pin { + pins = "gpio17"; + function = "normal"; + bias-disable; + power-source = ; + qcom,drive-strength = ; + }; + + fuelgauge_pin: fuelgauge-int-pin { + pins = "gpio21"; + function = "normal"; + bias-disable; + input-enable; + power-source = ; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pma8084_s2>; +}; + +&remoteproc_mss { + cx-supply = <&pma8084_s2>; + mss-supply = <&pma8084_s6>; + mx-supply = <&pma8084_s1>; + pll-supply = <&pma8084_l12>; +}; + +&rpm_requests { + pma8084-regulators { + compatible = "qcom,rpm-pma8084-regulators"; + + pma8084_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + pma8084_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pma8084_s6: s6 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l3: l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pma8084_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pma8084_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pma8084_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pma8084_l25: l25 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + }; + + pma8084_l26: l26 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_lvs1: lvs1 {}; + pma8084_lvs2: lvs2 {}; + pma8084_lvs3: lvs3 {}; + pma8084_lvs4: lvs4 {}; + + pma8084_5vs1: 5vs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pma8084_l20>; + vqmmc-supply = <&pma8084_s4>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pma8084_s4>; + non-removable; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + + interrupt-parent = <&tlmm>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; + }; +}; + +&sdhc_3 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&pma8084_l21>; + vqmmc-supply = <&pma8084_l13>; + + /* + * cd-gpio is intentionally disabled. If enabled, an SD card + * present during boot is not initialized correctly. Without + * cd-gpios the driver resorts to polling, so hotplug works. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>; + /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */ +}; + +&tlmm { + /* This seems suspicious, but somebody with this device should look into it. */ + blsp2_uart2_pins_active: blsp2-uart2-pins-active { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_uart8"; + drive-strength = <8>; + bias-disable; + }; + + blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + bt_pins: bt-pins { + hostwake { + pins = "gpio75"; + function = "gpio"; + drive-strength = <16>; + input-enable; + }; + + devwake { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + }; + }; + + sdc1_on: sdhc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + + sdc3_on: sdc3-on { + pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; + + sdhc3_cd_pin: sdc3-cd-on { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdc2_on: sdhc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + i2c_touchkey_pins: i2c-touchkey { + pins = "gpio95", "gpio96"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + i2c_led_gpioex_pins: i2c-led-gpioex { + pins = "gpio120", "gpio121"; + function = "gpio"; + input-enable; + bias-pull-down; + }; + + gpioex_pin: gpioex { + pins = "gpio145"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + wifi_pin: wifi { + pins = "gpio92"; + function = "gpio"; + input-enable; + bias-pull-down; + }; + + panel_te_pin: panel { + pins = "gpio12"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/dts/src/arm/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/dts/src/arm/qcom-msm8974pro-sony-xperia-shinano-castor.dts new file mode 100644 index 0000000000..9bd8faea61 --- /dev/null +++ b/dts/src/arm/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -0,0 +1,608 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include +#include + +/ { + model = "Sony Xperia Z2 Tablet"; + compatible = "sony,xperia-castor", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + }; + + vreg_bl_vddio: lcd-backlight-vddio { + compatible = "regulator-fixed"; + regulator-name = "vreg_bl_vddio"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + gpio = <&tlmm 69 0>; + enable-active-high; + + vin-supply = <&pm8941_s3>; + startup-delay-us = <70000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_backlight_en_pin_a>; + }; + + vreg_vsp: lcd-dcdc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_vsp"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + + gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_dcdc_en_pin_a>; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c2 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupt-parent = <&tlmm>; + interrupts = <86 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <10>; + + rmi-f01@1 { + reg = <0x1>; + syna,nosleep = <1>; + }; + + rmi-f11@11 { + reg = <0x11>; + syna,f11-flip-x = <1>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + lp8566_wled: backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + power-supply = <&vreg_bl_vddio>; + + bl-name = "backlight"; + dev-ctrl = /bits/ 8 <0x05>; + init-brt = /bits/ 8 <0x3f>; + rom_a0h { + rom-addr = /bits/ 8 <0xa0>; + rom-val = /bits/ 8 <0xff>; + }; + rom_a1h { + rom-addr = /bits/ 8 <0xa1>; + rom-val = /bits/ 8 <0x3f>; + }; + rom_a2h { + rom-addr = /bits/ 8 <0xa2>; + rom-val = /bits/ 8 <0x20>; + }; + rom_a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + rom_a4h { + rom-addr = /bits/ 8 <0xa4>; + rom-val = /bits/ 8 <0x02>; + }; + rom_a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x04>; + }; + rom_a6h { + rom-addr = /bits/ 8 <0xa6>; + rom-val = /bits/ 8 <0x80>; + }; + rom_a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xf7>; + }; + rom_a9h { + rom-addr = /bits/ 8 <0xa9>; + rom-val = /bits/ 8 <0x80>; + }; + rom_aah { + rom-addr = /bits/ 8 <0xaa>; + rom-val = /bits/ 8 <0x0f>; + }; + rom_aeh { + rom-addr = /bits/ 8 <0xae>; + rom-val = /bits/ 8 <0x0f>; + }; + }; +}; + +&blsp2_uart1 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>; + + host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; + }; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_coincell { + status = "okay"; + + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = ; + }; + + bt_reg_on_pin: bt-reg-on { + pins = "gpio16"; + function = "normal"; + + output-low; + power-source = ; + }; + + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio17"; + function = "func2"; + + output-high; + power-source = ; + }; + + wlan_regulator_pin: wl-reg-active { + pins = "gpio18"; + function = "normal"; + + bias-disable; + power-source = ; + }; + + lcd_dcdc_en_pin_a: lcd-dcdc-en-active { + pins = "gpio20"; + function = "normal"; + + bias-disable; + power-source = ; + input-disable; + output-low; + }; + +}; + +&rpm_requests { + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <154000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s4: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <500000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc3_on>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; +}; + +&tlmm { + lcd_backlight_en_pin_a: lcd-backlight-vddio { + pins = "gpio69"; + drive-strength = <10>; + output-low; + bias-disable; + }; + + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc3_on: sdc3-on { + clk { + pins = "gpio40"; + function = "sdc3"; + drive-strength = <10>; + bias-disable; + }; + + cmd { + pins = "gpio39"; + function = "sdc3"; + drive-strength = <10>; + bias-pull-up; + }; + + data { + pins = "gpio35", "gpio36", "gpio37", "gpio38"; + function = "sdc3"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + ts_int_pin: ts-int-pin { + pins = "gpio86"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + bt_host_wake_pin: bt-host-wake { + pins = "gpio95"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + bt_dev_wake_pin: bt-dev-wake { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/dts/src/arm/qcom-msm8974pro.dtsi b/dts/src/arm/qcom-msm8974pro.dtsi index b64c28036d..1e882e16a2 100644 --- a/dts/src/arm/qcom-msm8974pro.dtsi +++ b/dts/src/arm/qcom-msm8974pro.dtsi @@ -1,23 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 #include "qcom-msm8974.dtsi" -/ { - soc { - sdhci@f9824900 { - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>, - <&gcc GCC_SDCC1_CDCCAL_FF_CLK>, - <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>; - clock-names = "core", "iface", "xo", "cal", "sleep"; - }; +&gcc { + compatible = "qcom,gcc-msm8974pro"; +}; - clock-controller@fc400000 { - compatible = "qcom,gcc-msm8974pro"; - }; +&gpu { + compatible = "qcom,adreno-330.2", "qcom,adreno"; +}; - adreno@fdb00000 { - compatible = "qcom,adreno-330.2", - "qcom,adreno"; - }; - }; +&sdhc_1 { + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_CDCCAL_FF_CLK>, + <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>; + clock-names = "core", "iface", "xo", "cal", "sleep"; }; diff --git a/dts/src/arm/qcom-pm8226.dtsi b/dts/src/arm/qcom-pm8226.dtsi index b3d0f7b587..9b7d9d04de 100644 --- a/dts/src/arm/qcom-pm8226.dtsi +++ b/dts/src/arm/qcom-pm8226.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause #include #include +#include &spmi_bus { pm8226_0: pm8226@0 { @@ -40,6 +41,46 @@ chg_otg: otg-vbus { }; }; + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8226_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@7 { + reg = ; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + adc-chan@8 { + reg = ; + label = "die_temp"; + }; + adc-chan@9 { + reg = ; + label = "ref_625mv"; + }; + adc-chan@a { + reg = ; + label = "ref_1250mv"; + }; + adc-chan@e { + reg = ; + }; + adc-chan@f { + reg = ; + }; + }; + pm8226_mpps: mpps@a000 { compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp"; reg = <0xa000>; diff --git a/dts/src/arm/qcom-pm8941.dtsi b/dts/src/arm/qcom-pm8941.dtsi index da00b8f5ee..cdd2bdb77b 100644 --- a/dts/src/arm/qcom-pm8941.dtsi +++ b/dts/src/arm/qcom-pm8941.dtsi @@ -131,7 +131,7 @@ qcom,external-resistor-micro-ohms = <10000>; }; - coincell@2800 { + pm8941_coincell: coincell@2800 { compatible = "qcom,pm8941-coincell"; reg = <0x2800>; status = "disabled"; diff --git a/dts/src/arm/qcom-pmx65.dtsi b/dts/src/arm/qcom-pmx65.dtsi new file mode 100644 index 0000000000..5411b833d2 --- /dev/null +++ b/dts/src/arm/qcom-pmx65.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include +#include + +&spmi_bus { + pmic@1 { + compatible = "qcom,pmx65", "qcom,spmi-pmic"; + reg = <1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmx65_temp: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmx65_gpios: pinctrl@8800 { + compatible = "qcom,pmx65-gpio"; + reg = <0x8800>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/dts/src/arm/qcom-sdx55.dtsi b/dts/src/arm/qcom-sdx55.dtsi index d455795da4..1c2b208a56 100644 --- a/dts/src/arm/qcom-sdx55.dtsi +++ b/dts/src/arm/qcom-sdx55.dtsi @@ -275,13 +275,6 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sdx55-ipa-virt"; - reg = <0x01e00000 0x100000>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - qpic_bam: dma-controller@1b04000 { compatible = "qcom,bam-v1.7.0"; reg = <0x01b04000 0x1c000>; @@ -490,10 +483,13 @@ clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_USB30_MSTR_AXI_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; @@ -770,7 +766,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/dts/src/arm/qcom-sdx65-mtp.dts b/dts/src/arm/qcom-sdx65-mtp.dts index 59457da8e5..79dc31aa7c 100644 --- a/dts/src/arm/qcom-sdx65-mtp.dts +++ b/dts/src/arm/qcom-sdx65-mtp.dts @@ -5,6 +5,10 @@ /dts-v1/; #include "qcom-sdx65.dtsi" +#include +#include +#include +#include "qcom-pmx65.dtsi" / { model = "Qualcomm Technologies, Inc. SDX65 MTP"; @@ -18,8 +22,225 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_dsm: memory@8c400000 { + no-map; + reg = <0x8c400000 0x3200000>; + }; + + ipa_fw_mem: memory@8fced000 { + no-map; + reg = <0x8fced000 0x10000>; + }; + + mpss_adsp_mem: memory@90800000 { + no-map; + reg = <0x90800000 0x10000000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_bob_3p3: pmx65_bob { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; }; &blsp1_uart3 { status = "ok"; }; + +&apps_rsc { + pmx65-rpmh-regulators { + compatible = "qcom,pmx65-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-supply = <&vreg_s2b_1p224>; + vdd-l2-l18-supply = <&vreg_s2b_1p224>; + vdd-l3-supply = <&vreg_s8b_0p824>; + vdd-l4-supply = <&vreg_s7b_0p936>; + vdd-l5-l6-l16-supply = <&vreg_s4b_1p824>; + vdd-l7-supply = <&vreg_s3b_0p776>; + vdd-l8-l9-supply = <&vreg_s8b_0p824>; + vdd-l10-supply = <&vreg_bob_3p3>; + vdd-l11-l13-supply = <&vreg_bob_3p3>; + vdd-l12-supply = <&vreg_s2b_1p224>; + vdd-l14-supply = <&vreg_s3b_0p776>; + vdd-l15-supply = <&vreg_s2b_1p224>; + vdd-l17-supply = <&vreg_s8b_0p824>; + vdd-l19-supply = <&vreg_s3b_0p776>; + vdd-l20-supply = <&vreg_s7b_0p936>; + vdd-l21-supply = <&vreg_s7b_0p936>; + + vreg_s2b_1p224: smps2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_s3b_0p776: smps3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_s4b_1p824: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + vreg_s7b_0p936: smps7 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_s8b_0p824: smps8 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1300000>; + }; + + ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + ldo2 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = ; + }; + + ldo3 { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <960000>; + regulator-initial-mode = ; + }; + + ldo4 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + ldo7 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = ; + }; + + ldo8 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + ldo9 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + ldo10 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + ldo11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + ldo12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + ldo13 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + ldo14 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + ldo15 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + ldo16 { + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + regulator-initial-mode = ; + }; + + ldo17 { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <960000>; + regulator-initial-mode = ; + }; + + ldo19 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = ; + }; + + ldo20 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + ldo21 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + }; +}; diff --git a/dts/src/arm/qcom-sdx65.dtsi b/dts/src/arm/qcom-sdx65.dtsi index 796641d30e..df6f9d6288 100644 --- a/dts/src/arm/qcom-sdx65.dtsi +++ b/dts/src/arm/qcom-sdx65.dtsi @@ -9,6 +9,7 @@ #include #include #include +#include #include / { @@ -60,11 +61,56 @@ #size-cells = <1>; ranges; + tz_heap_mem: memory@8fcad000 { + no-map; + reg = <0x8fcad000 0x40000>; + }; + + secdata_mem: memory@8fcfd000 { + no-map; + reg = <0x8fcfd000 0x1000>; + }; + + hyp_mem: memory@8fd00000 { + no-map; + reg = <0x8fd00000 0x80000>; + }; + + access_control_mem: memory@8fd80000 { + no-map; + reg = <0x8fd80000 0x80000>; + }; + + aop_mem: memory@8fe00000 { + no-map; + reg = <0x8fe00000 0x20000>; + }; + + smem_mem: memory@8fe20000 { + no-map; + reg = <0x8fe20000 0xc0000>; + }; + cmd_db: reserved-memory@8fee0000 { compatible = "qcom,cmd-db"; reg = <0x8fee0000 0x20000>; no-map; }; + + tz_mem: memory@8ff00000 { + no-map; + reg = <0x8ff00000 0x100000>; + }; + + tz_apps_mem: memory@90000000 { + no-map; + reg = <0x90000000 0x500000>; + }; + + llcc_tcm_mem: memory@15800000 { + no-map; + reg = <0x15800000 0x800000>; + }; }; soc: soc { @@ -91,6 +137,44 @@ status = "disabled"; }; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x40000>; + #hwlock-cells = <1>; + }; + + sdhc_1: sdhci@8804000 { + compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x08804000 0x1000>; + reg-names = "hc_mem"; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + spmi_bus: qcom,spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0xc440000 0xd00>, + <0xc600000 0x2000000>, + <0xe600000 0x100000>, + <0xe700000 0xa0000>, + <0xc40a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + cell-index = <0>; + qcom,channel = <0>; + qcom,ee = <0>; + }; + tlmm: pinctrl@f100000 { compatible = "qcom,sdx65-tlmm"; reg = <0xf100000 0x300000>; @@ -112,6 +196,46 @@ interrupt-controller; }; + apps_smmu: iommu@15000000 { + compatible = "qcom,sdx65-smmu-500", "arm,mmu-500"; + reg = <0x15000000 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + intc: interrupt-controller@17800000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -121,6 +245,23 @@ <0x17802000 0x1000>; }; + a7pll: clock@17808000 { + compatible = "qcom,sdx55-a7pll"; + reg = <0x17808000 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <0>; + }; + + apcs: mailbox@17810000 { + compatible = "qcom,sdx55-apcs-gcc", "syscon"; + reg = <0x17810000 0x2000>; + #mbox-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>; + clock-names = "ref", "pll", "aux"; + #clock-cells = <0>; + }; + timer@17820000 { #address-cells = <1>; #size-cells = <1>; @@ -202,12 +343,62 @@ , ; - rpmhcc: clock-controller@1 { + rpmhcc: clock-controller { compatible = "qcom,sdx65-rpmh-clk"; #clock-cells = <1>; clock-names = "xo"; clocks = <&xo_board>; }; + + rpmhpd: power-controller { + compatible = "qcom,sdx65-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; }; }; diff --git a/dts/src/arm/r8a7743.dtsi b/dts/src/arm/r8a7743.dtsi index 3502b5dcc0..c0c145a5fe 100644 --- a/dts/src/arm/r8a7743.dtsi +++ b/dts/src/arm/r8a7743.dtsi @@ -140,6 +140,7 @@ compatible = "renesas,r8a7743-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/dts/src/arm/r8a7744.dtsi b/dts/src/arm/r8a7744.dtsi index f5d4b8b85b..3f4fb53dd6 100644 --- a/dts/src/arm/r8a7744.dtsi +++ b/dts/src/arm/r8a7744.dtsi @@ -140,6 +140,7 @@ compatible = "renesas,r8a7744-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/dts/src/arm/r8a7745.dtsi b/dts/src/arm/r8a7745.dtsi index f877c51f76..fe8e98a66d 100644 --- a/dts/src/arm/r8a7745.dtsi +++ b/dts/src/arm/r8a7745.dtsi @@ -270,6 +270,7 @@ rwdt: watchdog@e6020000 { compatible = "renesas,r8a7745-wdt", "renesas,rcar-gen2-wdt"; + interrupts = ; reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; diff --git a/dts/src/arm/r8a77470.dtsi b/dts/src/arm/r8a77470.dtsi index 13ef1e9bf4..c90f2a2702 100644 --- a/dts/src/arm/r8a77470.dtsi +++ b/dts/src/arm/r8a77470.dtsi @@ -91,6 +91,7 @@ compatible = "renesas,r8a77470-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/dts/src/arm/r8a7790.dtsi b/dts/src/arm/r8a7790.dtsi index ed6dd4fcc5..a640488d51 100644 --- a/dts/src/arm/r8a7790.dtsi +++ b/dts/src/arm/r8a7790.dtsi @@ -274,6 +274,7 @@ compatible = "renesas,r8a7790-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/dts/src/arm/r8a7791.dtsi b/dts/src/arm/r8a7791.dtsi index 0ccc162d3c..542ed0a718 100644 --- a/dts/src/arm/r8a7791.dtsi +++ b/dts/src/arm/r8a7791.dtsi @@ -161,6 +161,7 @@ compatible = "renesas,r8a7791-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/dts/src/arm/r8a7792.dtsi b/dts/src/arm/r8a7792.dtsi index 9cdb73894a..a6d9367f8f 100644 --- a/dts/src/arm/r8a7792.dtsi +++ b/dts/src/arm/r8a7792.dtsi @@ -111,6 +111,7 @@ compatible = "renesas,r8a7792-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/dts/src/arm/r8a7793.dtsi b/dts/src/arm/r8a7793.dtsi index dea4b1e108..9ebe7bfaf0 100644 --- a/dts/src/arm/r8a7793.dtsi +++ b/dts/src/arm/r8a7793.dtsi @@ -146,6 +146,7 @@ compatible = "renesas,r8a7793-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/dts/src/arm/r8a7794.dtsi b/dts/src/arm/r8a7794.dtsi index eac9ed8df0..b601ee6f75 100644 --- a/dts/src/arm/r8a7794.dtsi +++ b/dts/src/arm/r8a7794.dtsi @@ -128,6 +128,7 @@ compatible = "renesas,r8a7794-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/dts/src/arm/r9a06g032.dtsi b/dts/src/arm/r9a06g032.dtsi index 636a6ab31c..d366591095 100644 --- a/dts/src/arm/r9a06g032.dtsi +++ b/dts/src/arm/r9a06g032.dtsi @@ -66,6 +66,19 @@ interrupt-parent = <&gic>; ranges; + rtc0: rtc@40006000 { + compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc"; + reg = <0x40006000 0x1000>; + interrupts = , + , + ; + interrupt-names = "alarm", "timer", "pps"; + clocks = <&sysctrl R9A06G032_HCLK_RTC>; + clock-names = "hclk"; + power-domains = <&sysctrl>; + status = "disabled"; + }; + wdt0: watchdog@40008000 { compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt"; reg = <0x40008000 0x1000>; @@ -87,10 +100,62 @@ reg = <0x4000c000 0x1000>; status = "okay"; #clock-cells = <1>; + #power-domain-cells = <0>; clocks = <&ext_mclk>, <&ext_rtc_clk>, <&ext_jtag_clk>, <&ext_rgmii_ref>; clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + #address-cells = <1>; + #size-cells = <1>; + + dmamux: dma-router@a0 { + compatible = "renesas,rzn1-dmamux"; + reg = <0xa0 4>; + #dma-cells = <6>; + dma-requests = <32>; + dma-masters = <&dma0 &dma1>; + }; + }; + + pci_usb: pci@40030000 { + compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1"; + device_type = "pci"; + clocks = <&sysctrl R9A06G032_HCLK_USBH>, + <&sysctrl R9A06G032_HCLK_USBPM>, + <&sysctrl R9A06G032_CLK_PCI_USB>; + clock-names = "hclkh", "hclkpm", "pciclk"; + power-domains = <&sysctrl>; + reg = <0x40030000 0xc00>, + <0x40020000 0x1100>; + interrupts = ; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>; + /* Should map all possible DDR as inbound ranges, but + * the IP only supports a 256MB, 512MB, or 1GB window. + * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit) + */ + dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usbphy>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usbphy>; + phy-names = "usb"; + }; }; uart0: serial@40060000 { @@ -134,6 +199,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -145,6 +212,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -156,6 +225,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -167,6 +238,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -178,6 +251,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -195,11 +270,40 @@ interrupts = ; clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>; clock-names = "hclk", "eclk"; + power-domains = <&sysctrl>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + dma0: dma-controller@40104000 { + compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma"; + reg = <0x40104000 0x1000>; + interrupts = ; + clock-names = "hclk"; + clocks = <&sysctrl R9A06G032_HCLK_DMA0>; + dma-channels = <8>; + dma-requests = <16>; + dma-masters = <1>; + #dma-cells = <3>; + block_size = <0xfff>; + data-width = <8>; + }; + + dma1: dma-controller@40105000 { + compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma"; + reg = <0x40105000 0x1000>; + interrupts = ; + clock-names = "hclk"; + clocks = <&sysctrl R9A06G032_HCLK_DMA1>; + dma-channels = <8>; + dma-requests = <16>; + dma-masters = <1>; + #dma-cells = <3>; + block_size = <0xfff>; + data-width = <8>; + }; + gic: interrupt-controller@44101000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; interrupt-controller; @@ -214,8 +318,7 @@ }; timer { - compatible = "arm,cortex-a7-timer", - "arm,armv7-timer"; + compatible = "arm,armv7-timer"; interrupt-parent = <&gic>; arm,cpu-registers-not-fw-configured; always-on; @@ -225,4 +328,10 @@ , ; }; + + usbphy: usb-phy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + status = "disabled"; + }; }; diff --git a/dts/src/arm/rk3036.dtsi b/dts/src/arm/rk3036.dtsi index ba2b8891bb..9b0f049756 100644 --- a/dts/src/arm/rk3036.dtsi +++ b/dts/src/arm/rk3036.dtsi @@ -330,6 +330,8 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3036-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; @@ -556,7 +558,7 @@ status = "disabled"; }; - pdma: pdma@20078000 { + pdma: dma-controller@20078000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x20078000 0x4000>; interrupts = , @@ -614,7 +616,7 @@ #interrupt-cells = <2>; }; - pcfg_pull_default: pcfg_pull_default { + pcfg_pull_default: pcfg-pull-default { bias-pull-pin-default; }; diff --git a/dts/src/arm/rk3066a.dtsi b/dts/src/arm/rk3066a.dtsi index c25b9695db..de9915d946 100644 --- a/dts/src/arm/rk3066a.dtsi +++ b/dts/src/arm/rk3066a.dtsi @@ -202,8 +202,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3066a-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; - #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>, diff --git a/dts/src/arm/rk3188-bqedison2qc.dts b/dts/src/arm/rk3188-bqedison2qc.dts index 85d3fce014..35b7a5798e 100644 --- a/dts/src/arm/rk3188-bqedison2qc.dts +++ b/dts/src/arm/rk3188-bqedison2qc.dts @@ -7,6 +7,7 @@ /dts-v1/; #include #include +#include #include "rk3188.dtsi" / { @@ -485,7 +486,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio3>; - interrupts = ; + interrupts = ; interrupt-names = "host-wake"; brcm,drive-strength = <5>; pinctrl-names = "default"; diff --git a/dts/src/arm/rk3188.dtsi b/dts/src/arm/rk3188.dtsi index a94321e900..cdd4a0bd51 100644 --- a/dts/src/arm/rk3188.dtsi +++ b/dts/src/arm/rk3188.dtsi @@ -195,8 +195,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3188-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; - #clock-cells = <1>; #reset-cells = <1>; }; diff --git a/dts/src/arm/rk322x.dtsi b/dts/src/arm/rk322x.dtsi index 5868eb512f..ffc16d6b97 100644 --- a/dts/src/arm/rk322x.dtsi +++ b/dts/src/arm/rk322x.dtsi @@ -484,6 +484,8 @@ cru: clock-controller@110e0000 { compatible = "rockchip,rk3228-cru"; reg = <0x110e0000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; @@ -501,7 +503,7 @@ <75000000>; }; - pdma: pdma@110f0000 { + pdma: dma-controller@110f0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x110f0000 0x4000>; interrupts = , diff --git a/dts/src/arm/rk3288.dtsi b/dts/src/arm/rk3288.dtsi index 26b9bbe310..487b0e03d4 100644 --- a/dts/src/arm/rk3288.dtsi +++ b/dts/src/arm/rk3288.dtsi @@ -862,6 +862,8 @@ cru: clock-controller@ff760000 { compatible = "rockchip,rk3288-cru"; reg = <0x0 0xff760000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/dts/src/arm/rv1108.dtsi b/dts/src/arm/rv1108.dtsi index 4482549064..c158a7ea86 100644 --- a/dts/src/arm/rv1108.dtsi +++ b/dts/src/arm/rv1108.dtsi @@ -85,24 +85,6 @@ #clock-cells = <0>; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma: pdma@102a0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x102a0000 0x4000>; - interrupts = ; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC>; - clock-names = "apb_pclk"; - }; - }; - bus_intmem: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x2000>; @@ -259,6 +241,17 @@ status = "disabled"; }; + pdma: dma-controller@102a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x102a0000 0x4000>; + interrupts = ; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + }; + grf: syscon@10300000 { compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd"; reg = <0x10300000 0x1000>; @@ -456,6 +449,8 @@ cru: clock-controller@20200000 { compatible = "rockchip,rv1108-cru"; reg = <0x20200000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/dts/src/arm/s5pv210-aquila.dts b/dts/src/arm/s5pv210-aquila.dts index 54de3bc77c..bc0b7354b6 100644 --- a/dts/src/arm/s5pv210-aquila.dts +++ b/dts/src/arm/s5pv210-aquila.dts @@ -29,8 +29,7 @@ memory@30000000 { device_type = "memory"; - reg = <0x30000000 0x05000000 - 0x40000000 0x18000000>; + reg = <0x30000000 0x05000000>, <0x40000000 0x18000000>; }; pmic_ap_clk: clock-0 { diff --git a/dts/src/arm/s5pv210-aries.dtsi b/dts/src/arm/s5pv210-aries.dtsi index c8f1c324a6..daa1067055 100644 --- a/dts/src/arm/s5pv210-aries.dtsi +++ b/dts/src/arm/s5pv210-aries.dtsi @@ -24,9 +24,9 @@ memory@30000000 { device_type = "memory"; - reg = <0x30000000 0x05000000 - 0x40000000 0x10000000 - 0x50000000 0x08000000>; + reg = <0x30000000 0x05000000>, + <0x40000000 0x10000000>, + <0x50000000 0x08000000>; }; reserved-memory { @@ -564,7 +564,6 @@ reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>; vdd3-supply = <&ldo7_reg>; vci-supply = <&ldo17_reg>; - spi-cs-high; spi-max-frequency = <1200000>; pinctrl-names = "default"; @@ -636,7 +635,7 @@ }; &i2s0 { - dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>; + dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>; status = "okay"; }; @@ -895,7 +894,7 @@ device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>; interrupt-parent = <&gph2>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; + interrupt-names = "host-wakeup"; }; }; diff --git a/dts/src/arm/s5pv210-goni.dts b/dts/src/arm/s5pv210-goni.dts index c6f39147cb..d32f42dd1b 100644 --- a/dts/src/arm/s5pv210-goni.dts +++ b/dts/src/arm/s5pv210-goni.dts @@ -30,9 +30,9 @@ memory@30000000 { device_type = "memory"; - reg = <0x30000000 0x05000000 - 0x40000000 0x10000000 - 0x50000000 0x08000000>; + reg = <0x30000000 0x05000000>, + <0x40000000 0x10000000>, + <0x50000000 0x08000000>; }; pmic_ap_clk: clock-0 { diff --git a/dts/src/arm/s5pv210.dtsi b/dts/src/arm/s5pv210.dtsi index 353ba7b09a..f1b85aae88 100644 --- a/dts/src/arm/s5pv210.dtsi +++ b/dts/src/arm/s5pv210.dtsi @@ -117,7 +117,7 @@ }; }; - pdma0: dma@e0900000 { + pdma0: dma-controller@e0900000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xe0900000 0x1000>; interrupt-parent = <&vic0>; @@ -125,11 +125,9 @@ clocks = <&clocks CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; - pdma1: dma@e0a00000 { + pdma1: dma-controller@e0a00000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xe0a00000 0x1000>; interrupt-parent = <&vic0>; @@ -137,8 +135,6 @@ clocks = <&clocks CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; adc: adc@e1700000 { @@ -239,8 +235,8 @@ reg = <0xeee30000 0x1000>; interrupt-parent = <&vic2>; interrupts = <16>; - dma-names = "rx", "tx", "tx-sec"; - dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; + dma-names = "tx", "rx", "tx-sec"; + dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; @@ -259,8 +255,8 @@ reg = <0xe2100000 0x1000>; interrupt-parent = <&vic2>; interrupts = <17>; - dma-names = "rx", "tx"; - dmas = <&pdma1 12>, <&pdma1 13>; + dma-names = "tx", "rx"; + dmas = <&pdma1 13>, <&pdma1 12>; clock-names = "iis", "i2s_opclk0"; clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>; pinctrl-names = "default"; @@ -274,8 +270,8 @@ reg = <0xe2a00000 0x1000>; interrupt-parent = <&vic2>; interrupts = <18>; - dma-names = "rx", "tx"; - dmas = <&pdma1 14>, <&pdma1 15>; + dma-names = "tx", "rx"; + dmas = <&pdma1 15>, <&pdma1 14>; clock-names = "iis", "i2s_opclk0"; clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>; pinctrl-names = "default"; @@ -427,38 +423,28 @@ status = "disabled"; }; - ehci: ehci@ec200000 { + ehci: usb@ec200000 { compatible = "samsung,exynos4210-ehci"; reg = <0xec200000 0x100>; interrupts = <23>; interrupt-parent = <&vic1>; clocks = <&clocks CLK_USB_HOST>; clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; + phys = <&usbphy 1>; + phy-names = "host"; status = "disabled"; - - port@0 { - reg = <0>; - phys = <&usbphy 1>; - }; }; - ohci: ohci@ec300000 { + ohci: usb@ec300000 { compatible = "samsung,exynos4210-ohci"; reg = <0xec300000 0x100>; interrupts = <23>; interrupt-parent = <&vic1>; clocks = <&clocks CLK_USB_HOST>; clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; + phys = <&usbphy 1>; + phy-names = "host"; status = "disabled"; - - port@0 { - reg = <0>; - phys = <&usbphy 1>; - }; }; mfc: codec@f1700000 { @@ -528,7 +514,7 @@ clock-names = "sclk_fimg2d", "fimg2d"; }; - mdma1: mdma@fa200000 { + mdma1: dma-controller@fa200000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xfa200000 0x1000>; interrupt-parent = <&vic0>; @@ -536,8 +522,6 @@ clocks = <&clocks CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; rotator: rotator@fa300000 { diff --git a/dts/src/arm/sam9x60.dtsi b/dts/src/arm/sam9x60.dtsi index 998629a3c3..c328b67bea 100644 --- a/dts/src/arm/sam9x60.dtsi +++ b/dts/src/arm/sam9x60.dtsi @@ -684,7 +684,7 @@ status = "disabled"; }; - rtt: rtt@fffffe20 { + rtt: rtc@fffffe20 { compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xfffffe20 0x20>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/dts/src/arm/sama7g5.dtsi b/dts/src/arm/sama7g5.dtsi index f691c8f08d..a37e3a8039 100644 --- a/dts/src/arm/sama7g5.dtsi +++ b/dts/src/arm/sama7g5.dtsi @@ -209,7 +209,7 @@ status = "disabled"; }; - rtt: rtt@e001d020 { + rtt: rtc@e001d020 { compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xe001d020 0x30>; interrupts = ; @@ -463,6 +463,30 @@ status = "disabled"; }; + pdmc0: sound@e1608000 { + compatible = "microchip,sama7g5-pdmc"; + reg = <0xe1608000 0x1000>; + interrupts = ; + #sound-dai-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>; + dma-names = "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + pdmc1: sound@e160c000 { + compatible = "microchip,sama7g5-pdmc"; + reg = <0xe160c000 0x1000>; + interrupts = ; + #sound-dai-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>; + dma-names = "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + spdifrx: spdifrx@e1614000 { #sound-dai-cells = <0>; compatible = "microchip,sama7g5-spdifrx"; @@ -857,7 +881,6 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - interrupt-parent; reg = <0xe8c11000 0x1000>, <0xe8c12000 0x2000>; }; diff --git a/dts/src/arm/socfpga.dtsi b/dts/src/arm/socfpga.dtsi index 7c1d6423d7..bfaef45bdd 100644 --- a/dts/src/arm/socfpga.dtsi +++ b/dts/src/arm/socfpga.dtsi @@ -46,7 +46,7 @@ <0xff113000 0x1000>; }; - intc: intc@fffed000 { + intc: interrupt-controller@fffed000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -80,8 +80,6 @@ <0 110 4>, <0 111 4>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; resets = <&rst DMA_RESET>; diff --git a/dts/src/arm/socfpga_arria10.dtsi b/dts/src/arm/socfpga_arria10.dtsi index 3ba431dfa8..26bda2557f 100644 --- a/dts/src/arm/socfpga_arria10.dtsi +++ b/dts/src/arm/socfpga_arria10.dtsi @@ -38,7 +38,7 @@ <0xff113000 0x1000>; }; - intc: intc@ffffd000 { + intc: interrupt-controller@ffffd000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -73,8 +73,6 @@ <0 90 IRQ_TYPE_LEVEL_HIGH>, <0 91 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; diff --git a/dts/src/arm/socfpga_arria10_socdk_qspi.dts b/dts/src/arm/socfpga_arria10_socdk_qspi.dts index 2a74552240..11ccdc6c2d 100644 --- a/dts/src/arm/socfpga_arria10_socdk_qspi.dts +++ b/dts/src/arm/socfpga_arria10_socdk_qspi.dts @@ -9,7 +9,7 @@ &qspi { status = "okay"; - flash0: n25q00@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; diff --git a/dts/src/arm/socfpga_cyclone5_socdk.dts b/dts/src/arm/socfpga_cyclone5_socdk.dts index 253ef13918..b2241205c7 100644 --- a/dts/src/arm/socfpga_cyclone5_socdk.dts +++ b/dts/src/arm/socfpga_cyclone5_socdk.dts @@ -121,7 +121,7 @@ &qspi { status = "okay"; - flash0: n25q00@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; diff --git a/dts/src/arm/socfpga_cyclone5_sodia.dts b/dts/src/arm/socfpga_cyclone5_sodia.dts index b0003f350e..2564671fc1 100644 --- a/dts/src/arm/socfpga_cyclone5_sodia.dts +++ b/dts/src/arm/socfpga_cyclone5_sodia.dts @@ -113,7 +113,7 @@ &qspi { status = "okay"; - flash0: n25q512a@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q512a", "jedec,spi-nor"; diff --git a/dts/src/arm/socfpga_cyclone5_vining_fpga.dts b/dts/src/arm/socfpga_cyclone5_vining_fpga.dts index 25874e1b9c..f24f17c2f5 100644 --- a/dts/src/arm/socfpga_cyclone5_vining_fpga.dts +++ b/dts/src/arm/socfpga_cyclone5_vining_fpga.dts @@ -221,7 +221,7 @@ &qspi { status = "okay"; - n25q128@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128", "jedec,spi-nor"; @@ -238,7 +238,7 @@ cdns,tslch-ns = <4>; }; - n25q00@1 { + flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; diff --git a/dts/src/arm/ste-dbx5x0.dtsi b/dts/src/arm/ste-dbx5x0.dtsi index dc0bcc7020..c28b326402 100644 --- a/dts/src/arm/ste-dbx5x0.dtsi +++ b/dts/src/arm/ste-dbx5x0.dtsi @@ -755,7 +755,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */ <&dma 8 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -772,7 +772,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */ <&dma 9 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -790,7 +790,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */ <&dma 0 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -807,7 +807,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */ <&dma 35 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -824,7 +824,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */ <&dma 33 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -841,7 +841,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */ <&dma 40 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; diff --git a/dts/src/arm/ste-ux500-samsung-codina-tmo.dts b/dts/src/arm/ste-ux500-samsung-codina-tmo.dts new file mode 100644 index 0000000000..d6940e0afa --- /dev/null +++ b/dts/src/arm/ste-ux500-samsung-codina-tmo.dts @@ -0,0 +1,785 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Devicetree for the Samsung Galaxy Exhibit SGH-T599 also known as Codina-TMO, + * the "TMO" shall be read "T-Mobile" as this phone was produced exlusively + * for T-Mobile in the United States. + * + * This phone is closely related to the Codina, but has: + * - No CPU speed cap, full ~1GHz rate + * - Different power management IC, AB8505 + * - As AB8505 has a micro USB phy, no TI TSU6111 + * - Different power routing such as the removal of the external LDO for the + * touchscreen in favor of using the AB8505 + * - Using a regulator for the key backlight LED + * - Using the Samsung S6D27A1 panel by default + * - The panel is using one of the ordinary AB8505 regulators for 1.8V + * - WiFi/Bluetooth combi chip upgraded to BCM4334 + * - GPIO for backlight control moved from 68 to 69 + */ + +/dts-v1/; +#include "ste-db8500.dtsi" +#include "ste-ab8505.dtsi" +#include "ste-dbx5x0-pinctrl.dtsi" +#include +#include +#include +#include + +/ { + model = "Samsung Galaxy Exhibit (SGH-T599)"; + compatible = "samsung,codina-tmo", "st-ericsson,u8500"; + + chosen { + stdout-path = &serial2; + }; + + battery: battery { + compatible = "samsung,eb425161lu"; + }; + + thermal-zones { + battery-thermal { + /* This zone will be polled by the battery temperature code */ + polling-delay = <0>; + polling-delay-passive = <0>; + thermal-sensors = <&bat_therm>; + }; + }; + + bat_therm: thermistor { + compatible = "samsung,1404-001221"; + io-channels = <&gpadc 0x02>; /* BatTemp */ + pullup-uv = <1800000>; + pullup-ohm = <230000>; + pulldown-ohm = <0>; + #thermal-sensor-cells = <0>; + }; + + /* TI TXS0206 level translator for 2.9 V */ + sd_level_translator: regulator-gpio { + compatible = "regulator-fixed"; + + /* GPIO87 EN */ + gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-name = "sd-level-translator"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; + + startup-delay-us = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_level_translator_default>; + }; + + /* External LDO MIC5366-3.3YMT for eMMC */ + ldo_3v3_reg: regulator-gpio-ldo-3v3 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VMEM_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <5000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_ldo_en_default_mode>; + }; + + /* + * External Ricoh RP152L010B-TR LCD LDO regulator for the display. + * LCD_PWR_EN controls both the 3.0V output. + */ + lcd_3v0_reg: regulator-gpio-lcd-3v0 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_LCD_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + /* GPIO219 controls this regulator */ + gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwr_en_default_mode>; + }; + + /* + * This regulator is a GPIO line that drives the Broadcom WLAN + * line WL_REG_ON high and enables the internal regulators + * inside the chip. Unfortunatley it is erroneously named + * WLAN_RST_N on the schematic but it is not a reset line. + * + * The voltage specified here is only used to determine the OCR mask, + * the for the SDIO connector, the chip is actually connected + * directly to VBAT. + */ + wl_reg: regulator-gpio-wlan { + compatible = "regulator-fixed"; + regulator-name = "WL_REG_ON"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + startup-delay-us = <100000>; + /* GPIO215 (WLAN_RST_N to WL_REG_ON) */ + gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_ldo_en_default>; + }; + + vibrator { + compatible = "gpio-vibrator"; + /* GPIO195 "MOT_EN" */ + enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_default>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default_mode>; + + button-home { + linux,code = ; + label = "HOME"; + /* GPIO91 */ + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + button-volup { + linux,code = ; + label = "VOL+"; + /* GPIO67 */ + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + button-voldown { + linux,code = ; + label = "VOL-"; + /* GPIO92 */ + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + }; + + led-touchkeys { + compatible = "regulator-led"; + vled-supply = <&ab8500_ldo_aux4_reg>; // 3.3V + default-state = "on"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = ; + }; + + ktd253: backlight { + compatible = "kinetic,ktd253"; + /* GPIO69 is used on Codina R0.4 and Codina TMO */ + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + /* Default to 13/32 brightness */ + default-brightness = <13>; + pinctrl-names = "default"; + pinctrl-0 = <&ktd253_backlight_default_mode>; + }; + + /* Richtek RT8515GQW Flash LED Driver IC */ + flash { + compatible = "richtek,rt8515"; + /* GPIO 140 */ + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + /* GPIO 141 */ + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + /* + * RFS is 16 kOhm and RTS is 100 kOhm giving + * the flash max current 343mA and torch max + * current 55 mA. + */ + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_flash_default_mode>; + + led { + function = LED_FUNCTION_FLASH; + color = ; + flash-max-timeout-us = <250000>; + flash-max-microamp = <343750>; + led-max-microamp = <55000>; + }; + }; + + /* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */ + i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + + /* TODO: this should also be used by the SM5103 Camera power management unit */ + }; + + /* Bit-banged I2C on GPIO151 and GPIO152 also called "COMP I2C" */ + i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_1_default>; + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@c { + compatible = "alps,hscdtd008a"; + reg = <0x0c>; + clock-frequency = <400000>; + + avdd-supply = <&ab8500_ldo_aux1_reg>; // 3V + dvdd-supply = <&ab8500_ldo_aux8_reg>; // 1.8V + }; + }; + + spi-gpio-0 { + compatible = "spi-gpio"; + /* Clock on GPIO220, pin SCL */ + sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; + /* MOSI on GPIO224, pin SDI "slave data in" */ + mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + /* MISO on GPIO225, pin SDO "slave data out" */ + miso-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + /* Chip select on GPIO201 */ + cs-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6d27a1"; + spi-max-frequency = <1200000>; + /* TYPE 3: inverse clock polarity and phase */ + spi-cpha; + spi-cpol; + + reg = <0>; + vci-supply = <&lcd_3v0_reg>; + vccio-supply = <&ab8500_ldo_aux6_reg>; + + /* Reset on GPIO139 */ + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + /* LCD_VGH/LCD_DETECT, ESD IRQ on GPIO93 */ + interrupt-parent = <&gpio2>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_default_mode>; + backlight = <&ktd253>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + + soc { + /* External Micro SD slot */ + mmc@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + st,sig-pin-fbclk; + full-pwr-cycle; + /* MMC is powered by AUX3 1.2V .. 2.91V */ + vmmc-supply = <&ab8500_ldo_aux3_reg>; + /* 2.9 V level translator is using AUX3 at 2.9 V as well */ + vqmmc-supply = <&sd_level_translator>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc0_a_2_default>; + pinctrl-1 = <&mc0_a_2_sleep>; + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + status = "okay"; + }; + + /* WLAN SDIO channel */ + mmc@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + non-removable; + cap-sd-highspeed; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc1_a_2_default>; + pinctrl-1 = <&mc1_a_2_sleep>; + /* + * GPIO-controlled voltage enablement: this drives + * the WL_REG_ON line high when we use this device. + * Represented as regulator to fill OCR mask. + */ + vmmc-supply = <&wl_reg>; + + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + /* GPIO216 WL_HOST_WAKE */ + interrupt-parent = <&gpio6>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_mode>; + }; + }; + + /* eMMC */ + mmc@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + non-removable; + cap-mmc-highspeed; + mmc-ddr-1_8v; + no-sdio; + no-sd; + vmmc-supply = <&ldo_3v3_reg>; + pinctrl-names = "default", "sleep"; + /* + * GPIO130 will be set to input no pull-up resulting in a resistor + * pulling the reset high and taking the memory out of reset. + */ + pinctrl-0 = <&mc2_a_1_default>; + pinctrl-1 = <&mc2_a_1_sleep>; + status = "okay"; + }; + + /* GBF (Bluetooth) UART */ + uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; + status = "okay"; + + bluetooth { + /* BCM4334B0 actually */ + compatible = "brcm,bcm4330-bt"; + /* GPIO222 rail BT_VREG_EN to BT_REG_ON */ + shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + /* BT_WAKE on GPIO199 */ + device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + /* BT_HOST_WAKE on GPIO97 */ + /* FIXME: convert to interrupt */ + host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + /* BT_RST_N on GPIO209 */ + reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_mode>; + }; + }; + + /* GPS UART */ + uart@80121000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + /* CTS/RTS is not used, CTS is repurposed as GPIO */ + pinctrl-0 = <&u1rxtx_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep>; + /* FIXME: add a device for the GPS here */ + }; + + /* Debugging console UART connected to AB8505 */ + uart@80007000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; + }; + + prcmu@80157000 { + ab8505 { + phy { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + + /* This is mostly identical to the Codina v0.4 regulators */ + regulator { + ab8500_ldo_aux1 { + regulator-name = "v-sensors-vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux2 { + regulator-name = "v-aux2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux3 { + regulator-name = "v-mmc-sd"; + }; + + ab8500_ldo_aux4 { + regulator-name = "v-aux4"; + /* + * Providing some span here makes the touchkey + * LEDs actually dimmable. + */ + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux5 { + regulator-name = "v-aux5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ab8500_ldo_aux6 { + /* 1.8 V to the display */ + regulator-name = "v-aux6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ab8500_ldo_aux8 { + regulator-name = "v-sensors-vio"; + }; + }; + }; + }; + + /* I2C0 also known as "AGC I2C" */ + i2c@80004000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + + proximity@39 { + /* Codina has the Amstaos TMD2672 */ + compatible = "amstaos,tmd2672"; + clock-frequency = <400000>; + reg = <0x39>; + + /* IRQ on GPIO146 "PS_INT" */ + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&ab8500_ldo_aux8_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&tmd2672_codina_default>; + }; + }; + + /* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */ + i2c@80128000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; + + /* Bosch BMA254 accelerometer */ + accelerometer@18 { + compatible = "bosch,bma254"; + reg = <0x18>; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + vddio-supply = <&ab8500_ldo_aux8_reg>; // 1.8V + vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V + }; + }; + + /* I2C3 */ + i2c@80110000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; + + /* TODO: write bindings and driver for this touchscreen */ + + /* Zinitix BT404 ISP part */ + isp@50 { + compatible = "zinitix,bt404-isp"; + reg = <0x50>; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_default>; + }; + + /* Zinitix BT404 touchscreen, also has the touchkeys for menu and back */ + touchscreen@20 { + compatible = "zinitix,bt404"; + reg = <0x20>; + /* GPIO218 (TSP_INT_1V8) */ + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + vcca-supply = <&ab8500_ldo_aux2_reg>; // 3.3V + vdd-supply = <&ab8500_ldo_aux5_reg>; // 1.8V + zinitix,mode = <2>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_default>; + }; + }; + + mcde@a0350000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dpi_default_mode>; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&pinctrl { + /* + * This extends the MC0_A_2 default config to include + * the card detect GPIO217 line. + */ + sdi0 { + mc0_a_2_default { + default_cfg4 { + pins = "GPIO217_AH12"; /* card detect */ + ste,config = <&gpio_in_pd>; + }; + }; + }; + sdi2 { + /* + * GPIO130 should be set in GPIO mode and + * pulled down. (Not connected.) + */ + mc2_a_1_default { + default_cfg2 { + pins = "GPIO130_C8"; /* FBCLK */ + ste,config = <&gpio_in_pd>; + }; + }; + }; + /* GPIO that enables the 2.9V SD card level translator */ + sd-level-translator { + sd_level_translator_default: sd_level_translator_default { + /* level shifter on GPIO87 */ + codina_cfg1 { + pins = "GPIO87_B3"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the eMMC */ + emmc-ldo { + emmc_ldo_en_default_mode: emmc_ldo_default { + /* LDO enable on GPIO223 */ + codina_cfg1 { + pins = "GPIO223_AH9"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIOs for panel control */ + panel { + panel_default_mode: panel_default { + codina_cfg1 { + /* Reset line */ + pins = "GPIO139_C9"; + ste,config = <&gpio_out_lo>; + }; + codina_cfg2 { + /* ESD IRQ line "LCD detect" */ + pins = "GPIO93_B7"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the LCD display */ + lcd-ldo { + lcd_pwr_en_default_mode: lcd_pwr_en_default { + /* LCD_PWR_EN on GPIO219 */ + codina_cfg1 { + pins = "GPIO219_AG10"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the WLAN internal LDO regulators */ + wlan-ldo { + wlan_ldo_en_default: wlan_ldo_default { + /* GPIO215 named WLAN_RST_N */ + codina_cfg1 { + pins = "GPIO215_AH13"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* Backlight GPIO */ + backlight { + ktd253_backlight_default_mode: backlight_default { + skomer_cfg1 { + pins = "GPIO69_E2"; /* LCD_BL_CTRL */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* Flash and torch */ + flash { + gpio_flash_default_mode: flash_default { + codina_cfg1 { + pins = "GPIO140_B11", "GPIO141_C12"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* GPIO keys */ + gpio-keys { + gpio_keys_default_mode: gpio_keys_default { + skomer_cfg1 { + pins = "GPIO67_G2", /* VOL UP */ + "GPIO91_B6", /* HOME */ + "GPIO92_D6"; /* VOL DOWN */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + /* Interrupt line for the Zinitix BT404 touchscreen */ + tsp { + tsp_default: tsp_default { + codina_cfg1 { + pins = "GPIO218_AH11"; /* TSP_INT_1V8 */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* Interrupt line for light/proximity sensor TMD2672 */ + tmd2672 { + tmd2672_codina_default: tmd2672_codina { + codina_cfg1 { + pins = "GPIO146_D13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for subpmu */ + i2c-gpio-0 { + i2c_gpio_0_default: i2c_gpio_0 { + codina_cfg1 { + pins = "GPIO143_D12", "GPIO144_B13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for the NFC */ + i2c-gpio-1 { + i2c_gpio_1_default: i2c_gpio_1 { + codina_cfg1 { + pins = "GPIO151_D17", "GPIO152_D16"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based SPI bus for the display */ + spi-gpio-0 { + spi_gpio_0_default: spi_gpio_0_d { + codina_cfg1 { + pins = "GPIO220_AH10", "GPIO201_AF24", "GPIO224_AG9"; + ste,config = <&gpio_out_hi>; + }; + codina_cfg2 { + pins = "GPIO225_AG8"; + /* Needs pull down, no pull down resistor on board */ + ste,config = <&gpio_in_pd>; + }; + }; + spi_gpio_0_sleep: spi_gpio_0_s { + codina_cfg1 { + pins = "GPIO220_AH10", "GPIO201_AF24", + "GPIO224_AG9", "GPIO225_AG8"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + wlan { + wlan_default_mode: wlan_default { + /* GPIO216 for WL_HOST_WAKE */ + codina_cfg2 { + pins = "GPIO216_AG12"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + bluetooth { + bluetooth_default_mode: bluetooth_default { + /* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */ + codina_cfg1 { + pins = "GPIO199_AH23", "GPIO222_AJ9"; + ste,config = <&gpio_out_lo>; + }; + /* GPIO97 BT_HOST_WAKE */ + codina_cfg2 { + pins = "GPIO97_D9"; + ste,config = <&gpio_in_nopull>; + }; + /* GPIO209 BT_RST_N */ + codina_cfg3 { + pins = "GPIO209_AG15"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + vibrator { + vibrator_default: vibrator_default { + codina_cfg1 { + pins = "GPIO195_AG28"; /* MOT_EN */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + mcde { + dpi_default_mode: dpi_default { + default_mux1 { + /* Mux in all the data lines */ + function = "lcd"; + groups = + /* Data lines D0-D7 GPIO70..GPIO77 */ + "lcd_d0_d7_a_1", + /* Data lines D8-D11 GPIO78..GPIO81 */ + "lcd_d8_d11_a_1", + /* Data lines D12-D15 GPIO82..GPIO85 */ + "lcd_d12_d15_a_1", + /* Data lines D16-D23 GPIO161..GPIO168 */ + "lcd_d16_d23_b_1"; + }; + default_mux2 { + function = "lcda"; + /* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */ + groups = "lcdaclk_b_1", "lcda_b_1"; + }; + /* Input, no pull-up is the default state for pins used for an alt function */ + default_cfg1 { + pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23"; + ste,config = <&in_nopull>; + }; + }; + }; +}; diff --git a/dts/src/arm/ste-ux500-samsung-codina.dts b/dts/src/arm/ste-ux500-samsung-codina.dts index 1c1725d31c..b6746ac167 100644 --- a/dts/src/arm/ste-ux500-samsung-codina.dts +++ b/dts/src/arm/ste-ux500-samsung-codina.dts @@ -9,9 +9,13 @@ * the boot loader. * * The Samsung tree further talks about GT-I8160P and GT-I8160chn (China). - * The GT-I8160 plain is knonw as the "europe" variant. - * The GT-I8160P appears to not use the ST Microelectronics accelerometer. + * The GT-I8160 plain is known as the "europe" variant. + * The GT-I8160P is the CDMA version and it appears to not use the ST + * Microelectronics accelerometer and reportedly has NFC mounted. * The GT-I8160chn appears to be the same as the europe variant. + * + * There is also the Codina-TMO, Samsung SGH-T599, which has its own device + * tree. */ /dts-v1/; @@ -303,7 +307,22 @@ #address-cells = <1>; #size-cells = <0>; - /* TODO: add the NFC chip here */ + nfc@2b { + /* NXP NFC circuit PN544 C1 marked NXP 44501 */ + compatible = "nxp,pn544-i2c"; + /* IF0, IF1 high, gives I2C address 0x2B */ + reg = <0x2b>; + clock-frequency = <400000>; + /* NFC IRQ on GPIO32 */ + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + /* GPIO 31 */ + firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + /* GPIO88 */ + enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pn544_codina_default>; + }; }; spi-gpio-0 { @@ -461,10 +480,20 @@ uart@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; - /* CTS/RTS is not used, CTS is repurposed as GPIO */ - pinctrl-0 = <&u1rxtx_a_1_default>; - pinctrl-1 = <&u1rxtx_a_1_sleep>; - /* FIXME: add a device for the GPS here */ + pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>; + + gnss { + compatible = "brcm,bcm4751"; + /* GPS_RSTN on GPIO21 */ + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + /* GPS_ON_OFF on GPIO86 */ + enable-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + /* GPS_1V8 (VSMPS2) */ + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&bcm4751_codina_default>; + }; }; /* Debugging console UART connected to TSU6111RSVR (FSA880) */ @@ -483,6 +512,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ @@ -515,10 +548,9 @@ pinctrl-0 = <&i2c0_a_1_default>; pinctrl-1 = <&i2c0_a_1_sleep>; - /* TODO: write bindings and driver for this proximity sensor */ proximity@39 { - /* Codina has the Mouser TMD2672 */ - compatible = "mouser,tmd2672"; + /* Codina has the Amstaos TMD2672 */ + compatible = "amstaos,tmd2672"; clock-frequency = <400000>; reg = <0x39>; @@ -847,6 +879,34 @@ }; }; }; + nfc { + pn544_codina_default: pn544_codina { + /* Interrupt line */ + codina_cfg1 { + pins = "GPIO32_V2"; + ste,config = <&gpio_in_nopull>; + }; + /* Enable and firmware GPIOs */ + codina_cfg2 { + pins = "GPIO31_V3", "GPIO88_C4"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + bcm4751 { + bcm4751_codina_default: bcm4751_codina { + /* Reset line, start out asserted */ + codina_cfg1 { + pins = "GPIO21_AB3"; + ste,config = <&gpio_out_lo>; + }; + /* GPS_ON_OFF, start out deasserted (off) */ + codina_cfg2 { + pins = "GPIO86_C6"; + ste,config = <&gpio_out_lo>; + }; + }; + }; vibrator { vibrator_default: vibrator_default { codina_cfg1 { diff --git a/dts/src/arm/ste-ux500-samsung-gavini.dts b/dts/src/arm/ste-ux500-samsung-gavini.dts index fd17097476..53062d50e4 100644 --- a/dts/src/arm/ste-ux500-samsung-gavini.dts +++ b/dts/src/arm/ste-ux500-samsung-gavini.dts @@ -456,6 +456,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <43000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ diff --git a/dts/src/arm/ste-ux500-samsung-golden.dts b/dts/src/arm/ste-ux500-samsung-golden.dts index 290ab59e86..b0dce91aff 100644 --- a/dts/src/arm/ste-ux500-samsung-golden.dts +++ b/dts/src/arm/ste-ux500-samsung-golden.dts @@ -304,6 +304,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + regulator { ab8500_ldo_aux1 { regulator-name = "sensor_3v"; diff --git a/dts/src/arm/ste-ux500-samsung-janice.dts b/dts/src/arm/ste-ux500-samsung-janice.dts index 42762bfcd8..e6d4fd0eb5 100644 --- a/dts/src/arm/ste-ux500-samsung-janice.dts +++ b/dts/src/arm/ste-ux500-samsung-janice.dts @@ -485,7 +485,26 @@ /* CTS/RTS is not used, CTS is repurposed as GPIO */ pinctrl-0 = <&u1rxtx_a_1_default>; pinctrl-1 = <&u1rxtx_a_1_sleep>; - /* FIXME: add a device for the GPS here */ + + gnss { + /* + * The Low Noise Amplifier (LNA) power and enablement is controlled + * autonomously by the GSD4t. + * Janice has a SiRFstarIV-based GSD4t + * Golden has a SiRFstarV 5t-based CSRG05TA03-ICJE-R. + */ + compatible = "csr,gsd4t"; + /* GPS_RSTN on GPIO21 */ + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + /* GPS_ON_OFF on GPIO96 */ + sirf,onoff-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + /* GPS_1V8 (VSMPS2) */ + vcc-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gsd4t_janice_default>; + /* According to /etc/sirfgps.conf */ + current-speed = <460800>; + }; }; /* Debugging console UART connected to TSU6111RSVR (FSA880) */ @@ -504,6 +523,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <15000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ @@ -941,4 +964,23 @@ }; }; }; + gsd4t { + gsd4t_janice_default: gsd4t_janice { + /* Reset line, start out asserted */ + janice_cfg1 { + pins = "GPIO21_AB3"; + ste,config = <&gpio_out_lo>; + }; + /* GPS_ON_OFF, start out deasserted (off) */ + janice_cfg2 { + pins = "GPIO96_D8"; + ste,config = <&gpio_out_lo>; + }; + /* Unused power enablement line, used in R0.0 and R0.1 boards */ + janice_cfg3 { + pins = "GPIO86_C6"; + ste,config = <&gpio_in_pd>; + }; + }; + }; }; diff --git a/dts/src/arm/ste-ux500-samsung-kyle.dts b/dts/src/arm/ste-ux500-samsung-kyle.dts index 2a5bf54137..c57676faf1 100644 --- a/dts/src/arm/ste-ux500-samsung-kyle.dts +++ b/dts/src/arm/ste-ux500-samsung-kyle.dts @@ -325,6 +325,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ diff --git a/dts/src/arm/ste-ux500-samsung-skomer.dts b/dts/src/arm/ste-ux500-samsung-skomer.dts index dcb03ce7cb..81b341a5ae 100644 --- a/dts/src/arm/ste-ux500-samsung-skomer.dts +++ b/dts/src/arm/ste-ux500-samsung-skomer.dts @@ -281,12 +281,27 @@ }; }; - /* GPF UART */ + /* GPS UART */ uart@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>; + + gnss { + /* The CSRG05TA03-ICJE-R is a SirfStarV 5t chip */ + compatible = "csr,csrg05ta03-icje-r"; + /* GPS_RSTN on GPIO209 */ + reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; + /* GPS_ON_OFF on GPIO86 */ + sirf,onoff-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + /* GPS_1V8 (VSMPS2) */ + vcc-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&g05ta03_skomer_default>; + /* According to /etc/sirfgps.conf */ + current-speed = <460800>; + }; }; /* Debugging console UART connected to AB8505 USB */ @@ -305,6 +320,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <16000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ @@ -649,6 +668,20 @@ }; }; }; + g05ta03 { + g05ta03_skomer_default: g05ta03 { + /* Reset line, start out de-asserted */ + skomer_cfg1 { + pins = "GPIO209_AG15"; + ste,config = <&gpio_out_hi>; + }; + /* GPS_ON_OFF, start out deasserted (off) */ + skomer_cfg2 { + pins = "GPIO86_C6"; + ste,config = <&gpio_out_lo>; + }; + }; + }; }; &ab8505_gpio { diff --git a/dts/src/arm/stm32f4-pinctrl.dtsi b/dts/src/arm/stm32f4-pinctrl.dtsi index 155d9ffacc..500bcc302d 100644 --- a/dts/src/arm/stm32f4-pinctrl.dtsi +++ b/dts/src/arm/stm32f4-pinctrl.dtsi @@ -45,7 +45,7 @@ / { soc { - pinctrl: pin-controller@40020000 { + pinctrl: pinctrl@40020000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0x40020000 0x3000>; diff --git a/dts/src/arm/stm32f7-pinctrl.dtsi b/dts/src/arm/stm32f7-pinctrl.dtsi index 1cf8a23c26..8f37aefa73 100644 --- a/dts/src/arm/stm32f7-pinctrl.dtsi +++ b/dts/src/arm/stm32f7-pinctrl.dtsi @@ -9,7 +9,7 @@ / { soc { - pinctrl: pin-controller@40020000 { + pinctrl: pinctrl@40020000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0x40020000 0x3000>; diff --git a/dts/src/arm/stm32h743.dtsi b/dts/src/arm/stm32h743.dtsi index 6e42ca2dad..91dde07a38 100644 --- a/dts/src/arm/stm32h743.dtsi +++ b/dts/src/arm/stm32h743.dtsi @@ -583,7 +583,7 @@ status = "disabled"; }; - pinctrl: pin-controller@58020000 { + pinctrl: pinctrl@58020000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32h743-pinctrl"; diff --git a/dts/src/arm/stm32mp131.dtsi b/dts/src/arm/stm32mp131.dtsi index 1708c79b52..f9ebc47e64 100644 --- a/dts/src/arm/stm32mp131.dtsi +++ b/dts/src/arm/stm32mp131.dtsi @@ -75,6 +75,12 @@ compatible = "fixed-clock"; clock-frequency = <99000000>; }; + + clk_rtc_k: clk-rtc-k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; }; intc: interrupt-controller@a0021000 { @@ -218,6 +224,15 @@ status = "disabled"; }; + rtc: rtc@5c004000 { + compatible = "st,stm32mp1-rtc"; + reg = <0x5c004000 0x400>; + interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_pclk4>, <&clk_rtc_k>; + clock-names = "pclk", "rtc_ck"; + status = "disabled"; + }; + bsec: efuse@5c005000 { compatible = "st,stm32mp15-bsec"; reg = <0x5c005000 0x400>; @@ -239,11 +254,13 @@ * Break node order to solve dependency probe issue between * pinctrl and exti. */ - pinctrl: pin-controller@50002000 { + pinctrl: pinctrl@50002000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp135-pinctrl"; ranges = <0 0x50002000 0x8400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; pins-are-numbered; gpioa: gpio@50002000 { diff --git a/dts/src/arm/stm32mp135f-dk.dts b/dts/src/arm/stm32mp135f-dk.dts index ee100d108e..09d6226d59 100644 --- a/dts/src/arm/stm32mp135f-dk.dts +++ b/dts/src/arm/stm32mp135f-dk.dts @@ -6,6 +6,9 @@ /dts-v1/; +#include +#include +#include #include "stm32mp135.dtsi" #include "stm32mp13xf.dtsi" #include "stm32mp13-pinctrl.dtsi" @@ -23,6 +26,28 @@ reg = <0xc0000000 0x20000000>; }; + gpio-keys { + compatible = "gpio-keys"; + + user-pa13 { + label = "User-PA13"; + linux,code = ; + gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + function = LED_FUNCTION_HEARTBEAT; + color = ; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + vdd_sd: vdd-sd { compatible = "regulator-fixed"; regulator-name = "vdd_sd"; @@ -37,6 +62,10 @@ status = "okay"; }; +&rtc { + status = "okay"; +}; + &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; diff --git a/dts/src/arm/stm32mp15-pinctrl.dtsi b/dts/src/arm/stm32mp15-pinctrl.dtsi index f0d66d8c6e..6052243ad8 100644 --- a/dts/src/arm/stm32mp15-pinctrl.dtsi +++ b/dts/src/arm/stm32mp15-pinctrl.dtsi @@ -379,6 +379,40 @@ }; }; + ethernet0_rmii_pins_c: rmii-2 { + pins1 { + pinmux = , /* ETH1_RMII_TXD0 */ + , /* ETH1_RMII_TXD1 */ + , /* ETH1_RMII_TX_EN */ + , /* ETH1_RMII_REF_CLK */ + , /* ETH1_MDIO */ + ; /* ETH1_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = , /* ETH1_RMII_RXD0 */ + , /* ETH1_RMII_RXD1 */ + ; /* ETH1_RMII_CRS_DV */ + bias-disable; + }; + }; + + ethernet0_rmii_sleep_pins_c: rmii-sleep-2 { + pins1 { + pinmux = , /* ETH1_RMII_TXD0 */ + , /* ETH1_RMII_TXD1 */ + , /* ETH1_RMII_TX_EN */ + , /* ETH1_MDIO */ + , /* ETH1_MDC */ + , /* ETH1_RMII_RXD0 */ + , /* ETH1_RMII_RXD1 */ + , /* ETH1_RMII_REF_CLK */ + ; /* ETH1_RMII_CRS_DV */ + }; + }; + fmc_pins_a: fmc-0 { pins1 { pinmux = , /* FMC_NOE */ @@ -889,6 +923,21 @@ }; }; + mco2_pins_a: mco2-0 { + pins { + pinmux = ; /* MCO2 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + mco2_sleep_pins_a: mco2-sleep-0 { + pins { + pinmux = ; /* MCO2 */ + }; + }; + m_can1_pins_a: m-can1-0 { pins1 { pinmux = ; /* CAN1_TX */ @@ -2212,4 +2261,19 @@ bias-disable; }; }; + + spi1_pins_b: spi1-1 { + pins1 { + pinmux = , /* SPI1_SCK */ + ; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = ; /* SPI1_MISO */ + bias-disable; + }; + }; }; diff --git a/dts/src/arm/stm32mp151.dtsi b/dts/src/arm/stm32mp151.dtsi index f9aa9af31e..1b2fd3426a 100644 --- a/dts/src/arm/stm32mp151.dtsi +++ b/dts/src/arm/stm32mp151.dtsi @@ -115,6 +115,33 @@ status = "disabled"; }; + firmware { + optee: optee { + compatible = "linaro,optee-tz"; + method = "smc"; + status = "disabled"; + }; + + scmi: scmi { + compatible = "linaro,scmi-optee"; + #address-cells = <1>; + #size-cells = <0>; + linaro,optee-channel-id = <0>; + shmem = <&scmi_shm>; + status = "disabled"; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -122,6 +149,20 @@ interrupt-parent = <&intc>; ranges; + scmi_sram: sram@2ffff000 { + compatible = "mmio-sram"; + reg = <0x2ffff000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2ffff000 0x1000>; + + scmi_shm: scmi-sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0 0x80>; + status = "disabled"; + }; + }; + timers2: timer@40000000 { #address-cells = <1>; #size-cells = <0>; @@ -1623,7 +1664,7 @@ * Break node order to solve dependency probe issue between * pinctrl and exti. */ - pinctrl: pin-controller@50002000 { + pinctrl: pinctrl@50002000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp157-pinctrl"; @@ -1754,7 +1795,7 @@ }; }; - pinctrl_z: pin-controller-z@54004000 { + pinctrl_z: pinctrl@54004000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp157-z-pinctrl"; diff --git a/dts/src/arm/stm32mp151a-prtt1a.dts b/dts/src/arm/stm32mp151a-prtt1a.dts new file mode 100644 index 0000000000..75874eafde --- /dev/null +++ b/dts/src/arm/stm32mp151a-prtt1a.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1A"; + compatible = "prt,prtt1a", "st,stm32mp151"; +}; + +ðernet0 { + phy-handle = <&phy0>; +}; + +&mdio0 { + /* TI DP83TD510E */ + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.0181"; + reg = <0>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; +}; + +&pwm5_pins_a { + pins { + pinmux = ; /* TIM5_CH1 */ + }; +}; + +&pwm5_sleep_pins_a { + pins { + pinmux = ; /* TIM5_CH1 */ + }; +}; + +&timers5 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; diff --git a/dts/src/arm/stm32mp151a-prtt1c.dts b/dts/src/arm/stm32mp151a-prtt1c.dts new file mode 100644 index 0000000000..7ecf31263a --- /dev/null +++ b/dts/src/arm/stm32mp151a-prtt1c.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1C"; + compatible = "prt,prtt1c", "st,stm32mp151"; + + clock_ksz9031: clock-ksz9031 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + clock_sja1105: clock-sja1105 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpioc 1 GPIO_ACTIVE_HIGH + &gpioa 2 GPIO_ACTIVE_HIGH>; + + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpiod 8 GPIO_ACTIVE_LOW>; + }; +}; + +ðernet0 { + fixed-link { + speed = <100>; + full-duplex; + }; +}; + +&gpioa { + gpio-line-names = + "", "", "", "PHY0_nRESET", "PHY0_nINT", "", "", "", + "", "", "", "", "", "", "", "SPI1_nSS"; +}; + +&gpiod { + gpio-line-names = + "", "", "", "", "", "", "", "", + "WFM_RESET", "", "", "", "", "", "", ""; +}; + +&gpioe { + gpio-line-names = + "SDMMC2_nRESET", "", "", "", "", "", "SPI1_nRESET", "", + "", "", "", "", "WFM_nIRQ", "", "", ""; +}; + +&gpiog { + gpio-line-names = + "", "", "", "", "", "", "", "PHY3_nINT", + "PHY1_nINT", "PHY3_nRESET", "PHY2_nINT", "PHY2_nRESET", + "PHY1_nRESET", "SPE1_PWR", "SPE0_PWR", ""; +}; + +&mdio0 { + /* All this DP83TD510E PHYs can't be probed before switch@0 is + * probed so we need to use compatible with PHYid + */ + /* TI DP83TD510E */ + t1l0_phy: ethernet-phy@6 { + compatible = "ethernet-phy-id2000.0181"; + reg = <6>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TD510E */ + t1l1_phy: ethernet-phy@7 { + compatible = "ethernet-phy-id2000.0181"; + reg = <7>; + interrupts-extended = <&gpiog 8 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 12 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TD510E */ + t1l2_phy: ethernet-phy@10 { + compatible = "ethernet-phy-id2000.0181"; + reg = <10>; + interrupts-extended = <&gpiog 10 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* Micrel KSZ9031 */ + rj45_phy: ethernet-phy@2 { + reg = <2>; + interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + + clocks = <&clock_ksz9031>; + }; +}; + +&qspi { + status = "disabled"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + no-1-8-v; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_3v3>; + status = "okay"; +}; + +&sdmmc2_b4_od_pins_a { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + ; /* SDMMC2_D3 */ + }; +}; + +&sdmmc2_b4_pins_a { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + , /* SDMMC2_D3 */ + ; /* SDMMC2_CMD */ + }; +}; + +&sdmmc2_b4_sleep_pins_a { + pins { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + , /* SDMMC2_D3 */ + , /* SDMMC2_CK */ + ; /* SDMMC2_CMD */ + }; +}; + +&sdmmc2_d47_pins_a { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + }; +}; + +&sdmmc2_d47_sleep_pins_a { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + }; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_b>; + pinctrl-1 = <&sdmmc3_b4_od_pins_b>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>; + non-removable; + no-1-8-v; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mmc@1 { + compatible = "prt,prtt1c-wfm200", "silabs,wf200"; + reg = <1>; + }; +}; + +&sdmmc3_b4_od_pins_b { + pins1 { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + ; /* SDMMC3_D3 */ + }; +}; + +&sdmmc3_b4_pins_b { + pins1 { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + , /* SDMMC3_D3 */ + ; /* SDMMC3_CMD */ + }; +}; + +&sdmmc3_b4_sleep_pins_b { + pins { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + , /* SDMMC3_D3 */ + , /* SDMMC3_CK */ + ; /* SDMMC3_CMD */ + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins_b>; + pinctrl-names = "default"; + cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + switch@0 { + compatible = "nxp,sja1105q"; + reg = <0>; + spi-max-frequency = <4000000>; + spi-rx-delay-us = <1>; + spi-tx-delay-us = <1>; + spi-cpha; + + reset-gpios = <&gpioe 6 GPIO_ACTIVE_LOW>; + + clocks = <&clock_sja1105>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "t1l0"; + phy-mode = "rmii"; + phy-handle = <&t1l0_phy>; + }; + + port@1 { + reg = <1>; + label = "t1l1"; + phy-mode = "rmii"; + phy-handle = <&t1l1_phy>; + }; + + port@2 { + reg = <2>; + label = "t1l2"; + phy-mode = "rmii"; + phy-handle = <&t1l2_phy>; + }; + + port@3 { + reg = <3>; + label = "rj45"; + phy-handle = <&rj45_phy>; + phy-mode = "rgmii-id"; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <ðernet0>; + phy-mode = "rmii"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; diff --git a/dts/src/arm/stm32mp151a-prtt1l.dtsi b/dts/src/arm/stm32mp151a-prtt1l.dtsi new file mode 100644 index 0000000000..d865ab5d86 --- /dev/null +++ b/dts/src/arm/stm32mp151a-prtt1l.dtsi @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander + */ +/dts-v1/; + +#include "stm32mp151.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxad-pinctrl.dtsi" +#include +#include +#include + +/ { + aliases { + ethernet0 = ðernet0; + mdio-gpio0 = &mdio0; + serial0 = &uart4; + }; + + led-controller-0 { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = ; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + + /* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce + * stmmac MDC clock without reducing system bus rate, we need to use + * gpio based MDIO bus. + */ + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpioc 1 GPIO_ACTIVE_HIGH + &gpioa 2 GPIO_ACTIVE_HIGH>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&dts { + status = "okay"; +}; + +ðernet0 { + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + status = "okay"; +}; + +ðernet0_rmii_pins_a { + pins1 { + pinmux = , /* ETH1_RMII_TXD0 */ + , /* ETH1_RMII_TXD1 */ + ; /* ETH1_RMII_TX_EN */ + }; + pins2 { + pinmux = , /* ETH1_RMII_RXD0 */ + , /* ETH1_RMII_RXD1 */ + , /* ETH1_RMII_REF_CLK input */ + ; /* ETH1_RMII_CRS_DV */ + }; +}; + +ðernet0_rmii_sleep_pins_a { + pins1 { + pinmux = , /* ETH1_RMII_TXD0 */ + , /* ETH1_RMII_TXD1 */ + , /* ETH1_RMII_TX_EN */ + , /* ETH1_RMII_RXD0 */ + , /* ETH1_RMII_RXD1 */ + , /* ETH1_RMII_REF_CLK */ + ; /* ETH1_RMII_CRS_DV */ + }; +}; + +&iwdg2 { + status = "okay"; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <104000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&qspi_bk1_pins_a { + pins1 { + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_3v3>; + status = "okay"; +}; + +&sdmmc1_b4_od_pins_a { + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + +&sdmmc1_b4_pins_a { + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart4_idle_pins_a { + pins1 { + pinmux = ; /* UART4_TX */ + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-pull-up; + }; +}; + +&uart4_pins_a { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-pull-up; + }; +}; + +&uart4_sleep_pins_a { + pins { + pinmux = , /* UART4_TX */ + ; /* UART4_RX */ + }; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <®_3v3>; +}; + +&usbphyc_port1 { + phy-supply = <®_3v3>; +}; diff --git a/dts/src/arm/stm32mp151a-prtt1s.dts b/dts/src/arm/stm32mp151a-prtt1s.dts new file mode 100644 index 0000000000..ad25929e64 --- /dev/null +++ b/dts/src/arm/stm32mp151a-prtt1s.dts @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1S"; + compatible = "prt,prtt1s", "st,stm32mp151"; +}; + +ðernet0 { + phy-handle = <&phy0>; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + clock-frequency = <100000>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + humidity-sensor@40 { + compatible = "ti,hdc1080"; + reg = <0x40>; + }; + + co2-sensor@62 { + compatible = "sensirion,scd41"; + reg = <0x62>; + }; +}; + +&i2c1_pins_a { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + }; +}; + +&i2c1_sleep_pins_a { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + }; +}; + +&mdio0 { + /* TI DP83TD510E */ + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.0181"; + reg = <0>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; +}; diff --git a/dts/src/arm/stm32mp157a-dk1-scmi.dts b/dts/src/arm/stm32mp157a-dk1-scmi.dts new file mode 100644 index 0000000000..e3d3f3f30c --- /dev/null +++ b/dts/src/arm/stm32mp157a-dk1-scmi.dts @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157a-dk1.dts" + +/ { + model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board"; + compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157"; + + reserved-memory { + optee@de000000 { + reg = <0xde000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/dts/src/arm/stm32mp157c-dk2-scmi.dts b/dts/src/arm/stm32mp157c-dk2-scmi.dts new file mode 100644 index 0000000000..45dcd299aa --- /dev/null +++ b/dts/src/arm/stm32mp157c-dk2-scmi.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c-dk2.dts" + +/ { + model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board"; + compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157"; + + reserved-memory { + optee@de000000 { + reg = <0xde000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; +}; + +&dsi { + clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/dts/src/arm/stm32mp157c-ed1-scmi.dts b/dts/src/arm/stm32mp157c-ed1-scmi.dts new file mode 100644 index 0000000000..458e0ca3cd --- /dev/null +++ b/dts/src/arm/stm32mp157c-ed1-scmi.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c-ed1.dts" + +/ { + model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter"; + compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157"; + + reserved-memory { + optee@fe000000 { + reg = <0xfe000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/dts/src/arm/stm32mp157c-ev1-scmi.dts b/dts/src/arm/stm32mp157c-ev1-scmi.dts new file mode 100644 index 0000000000..df9c113edb --- /dev/null +++ b/dts/src/arm/stm32mp157c-ev1-scmi.dts @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c-ev1.dts" + +/ { + model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother"; + compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", + "st,stm32mp157"; + + reserved-memory { + optee@fe000000 { + reg = <0xfe000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; +}; + +&dsi { + clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&m_can1 { + clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/dts/src/arm/stm32mp15xx-dhcom-som.dtsi b/dts/src/arm/stm32mp15xx-dhcom-som.dtsi index 83e2c87713..238a611192 100644 --- a/dts/src/arm/stm32mp15xx-dhcom-som.dtsi +++ b/dts/src/arm/stm32mp15xx-dhcom-som.dtsi @@ -118,13 +118,12 @@ ðernet0 { status = "okay"; - pinctrl-0 = <ðernet0_rmii_pins_a>; - pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-0 = <ðernet0_rmii_pins_c &mco2_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_c &mco2_sleep_pins_a>; pinctrl-names = "default", "sleep"; phy-mode = "rmii"; max-speed = <100>; phy-handle = <&phy0>; - st,eth-ref-clk-sel; mdio0 { #address-cells = <1>; @@ -136,7 +135,7 @@ /* LAN8710Ai */ compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22"; - clocks = <&rcc ETHCK_K>; + clocks = <&rcc CK_MCO2>; reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; reset-assert-us = <500>; reset-deassert-us = <500>; @@ -446,6 +445,21 @@ }; }; +&rcc { + /* Connect MCO2 output to ETH_RX_CLK input via pad-pad connection */ + clocks = <&rcc CK_MCO2>; + clock-names = "ETH_RX_CLK/ETH_REF_CLK"; + + /* + * Set PLL4P output to 100 MHz to supply SDMMC with faster clock, + * set MCO2 output to 50 MHz to supply ETHRX clock with PLL4P/2, + * so that MCO2 behaves as a divider for the ETHRX clock here. + */ + assigned-clocks = <&rcc CK_MCO2>, <&rcc PLL4_P>; + assigned-clock-parents = <&rcc PLL4_P>; + assigned-clock-rates = <50000000>, <100000000>; +}; + &rng1 { status = "okay"; }; diff --git a/dts/src/arm/stm32mp15xx-dhcor-avenger96.dtsi b/dts/src/arm/stm32mp15xx-dhcor-avenger96.dtsi index 61e17f44ce..76c54b006d 100644 --- a/dts/src/arm/stm32mp15xx-dhcor-avenger96.dtsi +++ b/dts/src/arm/stm32mp15xx-dhcor-avenger96.dtsi @@ -141,6 +141,7 @@ compatible = "snps,dwmac-mdio"; reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; reset-delay-us = <1000>; + reset-post-delay-us = <1000>; phy0: ethernet-phy@7 { reg = <7>; diff --git a/dts/src/arm/sun8i-h3-nanopi.dtsi b/dts/src/arm/sun8i-h3-nanopi.dtsi index fc45d5aaa6..a9f749f49b 100644 --- a/dts/src/arm/sun8i-h3-nanopi.dtsi +++ b/dts/src/arm/sun8i-h3-nanopi.dtsi @@ -75,7 +75,6 @@ r_gpio_keys { compatible = "gpio-keys"; - input-name = "k1"; k1 { label = "k1"; diff --git a/dts/src/arm/suniv-f1c100s-licheepi-nano.dts b/dts/src/arm/suniv-f1c100s-licheepi-nano.dts index a1154e6c7c..04e59b8381 100644 --- a/dts/src/arm/suniv-f1c100s-licheepi-nano.dts +++ b/dts/src/arm/suniv-f1c100s-licheepi-nano.dts @@ -11,12 +11,43 @@ compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; aliases { + mmc0 = &mmc0; serial0 = &uart0; + spi0 = &spi0; }; chosen { stdout-path = "serial0:115200n8"; }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + disable-wp; + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; }; &uart0 { diff --git a/dts/src/arm/suniv-f1c100s.dtsi b/dts/src/arm/suniv-f1c100s.dtsi index 6100d3b75f..0edc172440 100644 --- a/dts/src/arm/suniv-f1c100s.dtsi +++ b/dts/src/arm/suniv-f1c100s.dtsi @@ -4,6 +4,9 @@ * Copyright 2018 Mesih Kilinc */ +#include +#include + / { #address-cells = <1>; #size-cells = <1>; @@ -26,9 +29,13 @@ }; cpus { - cpu { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0x0>; }; }; @@ -62,6 +69,70 @@ }; }; + spi0: spi@1c05000 { + compatible = "allwinner,suniv-f1c100s-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <10>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@1c06000 { + compatible = "allwinner,suniv-f1c100s-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <11>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc0: mmc@1c0f000 { + compatible = "allwinner,suniv-f1c100s-mmc", + "allwinner,sun7i-a20-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <23>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@1c10000 { + compatible = "allwinner,suniv-f1c100s-mmc", + "allwinner,sun7i-a20-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <24>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ccu: clock@1c20000 { compatible = "allwinner,suniv-f1c100s-ccu"; reg = <0x01c20000 0x400>; @@ -82,13 +153,24 @@ compatible = "allwinner,suniv-f1c100s-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <38>, <39>, <40>; - clocks = <&ccu 37>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + }; + + spi0_pc_pins: spi0-pc-pins { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; + uart0_pe_pins: uart0-pe-pins { pins = "PE0", "PE1"; function = "uart0"; @@ -98,14 +180,16 @@ timer@1c20c00 { compatible = "allwinner,suniv-f1c100s-timer"; reg = <0x01c20c00 0x90>; - interrupts = <13>; + interrupts = <13>, <14>, <15>; clocks = <&osc24M>; }; wdt: watchdog@1c20ca0 { compatible = "allwinner,suniv-f1c100s-wdt", - "allwinner,sun4i-a10-wdt"; + "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; + interrupts = <16>; + clocks = <&osc32k>; }; uart0: serial@1c25000 { @@ -114,8 +198,8 @@ interrupts = <1>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 38>; - resets = <&ccu 24>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -125,8 +209,8 @@ interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 39>; - resets = <&ccu 25>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -136,8 +220,8 @@ interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 40>; - resets = <&ccu 26>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; }; diff --git a/dts/src/arm/zynq-7000.dtsi b/dts/src/arm/zynq-7000.dtsi index 47c2a4b14c..c193264a86 100644 --- a/dts/src/arm/zynq-7000.dtsi +++ b/dts/src/arm/zynq-7000.dtsi @@ -343,8 +343,6 @@ <0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <4>; clocks = <&clkc 27>; clock-names = "apb_pclk"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts b/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts index ec7e2c0e82..bfb806cf6d 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts @@ -58,6 +58,15 @@ }; }; +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -74,6 +83,10 @@ cpu-supply = <®_dcdc2>; }; +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -328,6 +341,23 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,widgets = "Microphone", "Microphone Jack Left", + "Microphone", "Microphone Jack Right", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = "Left DAC", "DACL", + "Right DAC", "DACR", + "Headphone Jack", "HP", + "ADCL", "Left ADC", + "ADCR", "Right ADC", + "Microphone Jack Left", "MBIAS", + "MIC1", "Microphone Jack Left", + "Microphone Jack Right", "MBIAS", + "MIC2", "Microphone Jack Right"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts index aff0660b89..1128030e4c 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts @@ -197,6 +197,14 @@ status = "okay"; }; +&pio { + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dldo2>; + vcc-pe-supply = <®_aldo1>; + vcc-pf-supply = <®_dcdc1>; /* No dedicated supply-pin for this */ + vcc-pg-supply = <®_aldo2>; +}; + &pwm { status = "okay"; }; diff --git a/dts/src/arm64/altera/socfpga_stratix10.dtsi b/dts/src/arm64/altera/socfpga_stratix10.dtsi index 884bda1063..aa2bba7526 100644 --- a/dts/src/arm64/altera/socfpga_stratix10.dtsi +++ b/dts/src/arm64/altera/socfpga_stratix10.dtsi @@ -346,8 +346,6 @@ <0 88 4>, <0 89 4>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; clock-names = "apb_pclk"; resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; diff --git a/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j100.dts b/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j100.dts index 561eec21b4..8b0d586aa8 100644 --- a/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j100.dts +++ b/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j100.dts @@ -18,7 +18,7 @@ model = "JetHome JetHub J100"; aliases { serial0 = &uart_AO; /* Console */ - serial1 = &uart_AO_B; /* External UART (Wireless Module) */ + serial2 = &uart_AO_B; /* External UART (Wireless Module) */ ethernet0 = ðmac; }; @@ -81,6 +81,15 @@ vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vccq_1v8: regulator-vccq_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCCQ_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vddao_3v3>; @@ -248,8 +257,7 @@ bus-width = <4>; cap-sd-highspeed; - sd-uhs-sdr104; - max-frequency = <200000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -282,7 +290,7 @@ mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; + vqmmc-supply = <&vccq_1v8>; }; /* UART Bluetooth */ diff --git a/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi b/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi index 2d7032f41e..bcdf55f48a 100644 --- a/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi +++ b/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi @@ -416,7 +416,7 @@ pinctrl-names = "default"; status = "okay"; - gd25lq128: spi-flash@0 { + gd25lq128: flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts b/dts/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts index 2d769203f6..213a0705eb 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -298,7 +298,7 @@ pinctrl-0 = <&nor_pins>; pinctrl-names = "default"; - w25q32: spi-flash@0 { + w25q32: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts index 6eafb90869..fcb304c5a4 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts @@ -213,6 +213,12 @@ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; pinctrl-names = "default"; uart-has-rtscts; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; + }; }; &uart_C { diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts index 93d8f8aff7..874f91c348 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts @@ -284,7 +284,7 @@ pinctrl-0 = <&nor_pins>; pinctrl-names = "default"; - nor_4u1: spi-flash@0 { + nor_4u1: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts index 86bdc0baf0..f43c45daf7 100644 --- a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts +++ b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts @@ -374,7 +374,7 @@ pinctrl-0 = <&nor_pins>; pinctrl-names = "default"; - w25q32: spi-flash@0 { + w25q32: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "winbond,w25q16", "jedec,spi-nor"; diff --git a/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi b/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi index 3cf4ecb6d5..c9705941e4 100644 --- a/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi +++ b/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi @@ -458,7 +458,7 @@ pinctrl-0 = <&nor_pins>; pinctrl-names = "default"; - w25q128: spi-flash@0 { + w25q128: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "winbond,w25q128fw", "jedec,spi-nor"; diff --git a/dts/src/arm64/amlogic/meson-s4.dtsi b/dts/src/arm64/amlogic/meson-s4.dtsi index 480afa2cc6..ff213618a5 100644 --- a/dts/src/arm64/amlogic/meson-s4.dtsi +++ b/dts/src/arm64/amlogic/meson-s4.dtsi @@ -5,6 +5,7 @@ #include #include +#include / { cpus { @@ -60,6 +61,12 @@ #clock-cells = <0>; }; + pwrc: power-controller { + compatible = "amlogic,meson-s4-pwrc"; + #power-domain-cells = <1>; + status = "okay"; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -85,6 +92,32 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,meson-s4-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4000 { + reg = <0x0 0x4000 0x0 0x004c>, + <0x0 0x40c0 0x0 0x0220>; + reg-names = "mux", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 82>; + }; + }; + + gpio_intc: interrupt-controller@4080 { + compatible = "amlogic,meson-s4-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x4080 0x0 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <10 11 12 13 14 15 16 17 18 19 20 21>; + }; + uart_B: serial@7a000 { compatible = "amlogic,meson-s4-uart", "amlogic,meson-ao-uart"; diff --git a/dts/src/arm64/amlogic/meson-sm1-odroid-hc4.dts b/dts/src/arm64/amlogic/meson-sm1-odroid-hc4.dts index f3f953225b..e3486f6064 100644 --- a/dts/src/arm64/amlogic/meson-sm1-odroid-hc4.dts +++ b/dts/src/arm64/amlogic/meson-sm1-odroid-hc4.dts @@ -121,7 +121,7 @@ pinctrl-0 = <&nor_pins>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm64/arm/corstone1000-fvp.dts b/dts/src/arm64/arm/corstone1000-fvp.dts new file mode 100644 index 0000000000..26b0f1b3ce --- /dev/null +++ b/dts/src/arm64/arm/corstone1000-fvp.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +/* + * Copyright (c) 2022, Arm Limited. All rights reserved. + * Copyright (c) 2022, Linaro Limited. All rights reserved. + * + */ + +/dts-v1/; + +#include "corstone1000.dtsi" + +/ { + model = "ARM Corstone1000 FVP (Fixed Virtual Platform)"; + compatible = "arm,corstone1000-fvp"; + + smsc: ethernet@4010000 { + compatible = "smsc,lan91c111"; + reg = <0x40100000 0x10000>; + phy-mode = "mii"; + interrupts = ; + reg-io-width = <2>; + }; + + vmmc_v3_3d: fixed_v3_3d { + compatible = "regulator-fixed"; + regulator-name = "vmmc_supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sdmmc0: mmc@40300000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x40300000 0x1000>; + interrupts = ; + max-frequency = <12000000>; + vmmc-supply = <&vmmc_v3_3d>; + clocks = <&smbclk>, <&refclk100mhz>; + clock-names = "smclk", "apb_pclk"; + }; + + sdmmc1: mmc@50000000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x50000000 0x10000>; + interrupts = ; + max-frequency = <12000000>; + vmmc-supply = <&vmmc_v3_3d>; + clocks = <&smbclk>, <&refclk100mhz>; + clock-names = "smclk", "apb_pclk"; + }; +}; diff --git a/dts/src/arm64/arm/corstone1000-mps3.dts b/dts/src/arm64/arm/corstone1000-mps3.dts new file mode 100644 index 0000000000..e3146747c2 --- /dev/null +++ b/dts/src/arm64/arm/corstone1000-mps3.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +/* + * Copyright (c) 2022, Arm Limited. All rights reserved. + * Copyright (c) 2022, Linaro Limited. All rights reserved. + * + */ + +/dts-v1/; + +#include "corstone1000.dtsi" + +/ { + model = "ARM Corstone1000 FPGA MPS3 board"; + compatible = "arm,corstone1000-mps3"; + + smsc: ethernet@4010000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x40100000 0x10000>; + phy-mode = "mii"; + interrupts = ; + reg-io-width = <2>; + smsc,irq-push-pull; + }; + + usb_host: usb@40200000 { + compatible = "nxp,usb-isp1763"; + reg = <0x40200000 0x100000>; + interrupts = ; + bus-width = <16>; + dr_mode = "host"; + }; +}; diff --git a/dts/src/arm64/arm/corstone1000.dtsi b/dts/src/arm64/arm/corstone1000.dtsi new file mode 100644 index 0000000000..4e46826f88 --- /dev/null +++ b/dts/src/arm64/arm/corstone1000.dtsi @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +/* + * Copyright (c) 2022, Arm Limited. All rights reserved. + * Copyright (c) 2022, Linaro Limited. All rights reserved. + * + */ + +#include + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0>; + next-level-cache = <&L2_0>; + }; + }; + + memory@88200000 { + device_type = "memory"; + reg = <0x88200000 0x77e00000>; + }; + + gic: interrupt-controller@1c000000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1c010000 0x1000>, + <0x1c02f000 0x2000>, + <0x1c04f000 0x1000>, + <0x1c06f000 0x2000>; + interrupts = ; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <1024>; + }; + + refclk100mhz: refclk100mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "apb_pclk"; + }; + + smbclk: refclk24mhzx2 { + /* Reference 24MHz clock x 2 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "smclk"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + uartclk: uartclk { + /* UART clock - 50MHz */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "uartclk"; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + ranges; + + timer@1a220000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x1a220000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + clock-frequency = <50000000>; + ranges; + + frame@1a230000 { + frame-number = <0>; + interrupts = ; + reg = <0x1a230000 0x1000>; + }; + }; + + uart0: serial@1a510000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1a510000 0x1000>; + interrupts = ; + clocks = <&uartclk>, <&refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart1: serial@1a520000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1a520000 0x1000>; + interrupts = ; + clocks = <&uartclk>, <&refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + mhu_hse1: mailbox@1b820000 { + compatible = "arm,mhuv2-tx", "arm,primecell"; + reg = <0x1b820000 0x1000>; + clocks = <&refclk100mhz>; + clock-names = "apb_pclk"; + interrupts = ; + #mbox-cells = <2>; + arm,mhuv2-protocols = <0 0>; + secure-status = "okay"; /* secure-world-only */ + status = "disabled"; + }; + + mhu_seh1: mailbox@1b830000 { + compatible = "arm,mhuv2-rx", "arm,primecell"; + reg = <0x1b830000 0x1000>; + clocks = <&refclk100mhz>; + clock-names = "apb_pclk"; + interrupts = ; + #mbox-cells = <2>; + arm,mhuv2-protocols = <0 0>; + secure-status = "okay"; /* secure-world-only */ + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm64/arm/foundation-v8.dtsi b/dts/src/arm64/arm/foundation-v8.dtsi index fbf13f7c2b..83e3e7e398 100644 --- a/dts/src/arm64/arm/foundation-v8.dtsi +++ b/dts/src/arm64/arm/foundation-v8.dtsi @@ -220,7 +220,7 @@ clock-names = "uartclk", "apb_pclk"; }; - virtio-block@130000 { + virtio@130000 { compatible = "virtio,mmio"; reg = <0x130000 0x200>; interrupts = <42>; diff --git a/dts/src/arm64/arm/fvp-base-revc.dts b/dts/src/arm64/arm/fvp-base-revc.dts index 269b649934..a496e39e62 100644 --- a/dts/src/arm64/arm/fvp-base-revc.dts +++ b/dts/src/arm64/arm/fvp-base-revc.dts @@ -241,6 +241,7 @@ <0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, <0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, <0 0 43 &gic 0 0 GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, - <0 0 44 &gic 0 0 GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + <0 0 44 &gic 0 0 GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <0 0 46 &gic 0 0 GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/dts/src/arm64/arm/juno-base.dtsi b/dts/src/arm64/arm/juno-base.dtsi index 446c8f476e..065381c1cb 100644 --- a/dts/src/arm64/arm/juno-base.dtsi +++ b/dts/src/arm64/arm/juno-base.dtsi @@ -117,7 +117,7 @@ * The actual size is just 4K though 64K is reserved. Access to the * unmapped reserved region results in a DECERR response. */ - etf@20010000 { /* etf0 */ + etf_sys0: etf@20010000 { /* etf0 */ compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20010000 0 0x1000>; @@ -141,7 +141,7 @@ }; }; - tpiu@20030000 { + tpiu_sys: tpiu@20030000 { compatible = "arm,coresight-tpiu", "arm,primecell"; reg = <0 0x20030000 0 0x1000>; @@ -194,7 +194,7 @@ }; }; - etr@20070000 { + etr_sys: etr@20070000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20070000 0 0x1000>; iommus = <&smmu_etr 0>; @@ -212,7 +212,7 @@ }; }; - stm@20100000 { + stm_sys: stm@20100000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x20100000 0 0x1000>, <0 0x28000000 0 0x1000000>; @@ -289,6 +289,18 @@ }; }; + cti0: cti@22020000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x22020000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm0>; + }; + funnel@220c0000 { /* cluster0 funnel */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x220c0000 0 0x1000>; @@ -349,6 +361,18 @@ }; }; + cti1: cti@22120000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x22120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm1>; + }; + cpu_debug2: cpu-debug@23010000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23010000 0x0 0x1000>; @@ -374,6 +398,18 @@ }; }; + cti2: cti@23020000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23020000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm2>; + }; + funnel@230c0000 { /* cluster1 funnel */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x230c0000 0 0x1000>; @@ -446,6 +482,18 @@ }; }; + cti3: cti@23120000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm3>; + }; + cpu_debug4: cpu-debug@23210000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23210000 0x0 0x1000>; @@ -471,6 +519,18 @@ }; }; + cti4: cti@23220000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23220000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm4>; + }; + cpu_debug5: cpu-debug@23310000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23310000 0x0 0x1000>; @@ -496,6 +556,100 @@ }; }; + cti5: cti@23320000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23320000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm5>; + }; + + cti_sys0: cti@20020000 { /* sys_cti_0 */ + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20020000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs=<2 3>; + arm,trig-in-types=; + arm,trig-out-sigs=<0 1>; + arm,trig-out-types=; + arm,cs-dev-assoc = <&etr_sys>; + }; + + trig-conns@1 { + reg = <1>; + arm,trig-in-sigs=<0 1>; + arm,trig-in-types=; + arm,trig-out-sigs=<7 6>; + arm,trig-out-types=; + arm,cs-dev-assoc = <&etf_sys0>; + }; + + trig-conns@2 { + reg = <2>; + arm,trig-in-sigs=<4 5 6 7>; + arm,trig-in-types=; + arm,trig-out-sigs=<4 5>; + arm,trig-out-types=; + arm,cs-dev-assoc = <&stm_sys>; + }; + + trig-conns@3 { + reg = <3>; + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=; + arm,cs-dev-assoc = <&tpiu_sys>; + }; + }; + + cti_sys1: cti@20110000 { /* sys_cti_1 */ + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20110000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs=<0>; + arm,trig-in-types=; + arm,trig-out-sigs=<0>; + arm,trig-out-types=; + arm,trig-conn-name = "sys_profiler"; + }; + + trig-conns@1 { + reg = <1>; + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=; + arm,trig-conn-name = "watchdog"; + }; + + trig-conns@2 { + reg = <2>; + arm,trig-out-sigs=<1 6>; + arm,trig-out-types=; + arm,trig-conn-name = "g_counter"; + }; + }; + gpu: gpu@2d000000 { compatible = "arm,juno-mali", "arm,mali-t624"; reg = <0 0x2d000000 0 0x10000>; @@ -675,8 +829,6 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0x7ff00000 0 0x1000>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; interrupts = , , , diff --git a/dts/src/arm64/arm/juno-cs-r1r2.dtsi b/dts/src/arm64/arm/juno-cs-r1r2.dtsi index eda3d9e18a..2e43f45313 100644 --- a/dts/src/arm64/arm/juno-cs-r1r2.dtsi +++ b/dts/src/arm64/arm/juno-cs-r1r2.dtsi @@ -23,7 +23,7 @@ }; }; - etf@20140000 { /* etf1 */ + etf_sys1: etf@20140000 { /* etf1 */ compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20140000 0 0x1000>; @@ -82,4 +82,39 @@ }; }; + + cti_sys2: cti@20160000 { /* sys_cti_2 */ + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20160000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs=<0 1>; + arm,trig-in-types=; + arm,trig-out-sigs=<0 1>; + arm,trig-out-types=; + arm,cs-dev-assoc = <&etf_sys1>; + }; + + trig-conns@1 { + reg = <1>; + arm,trig-in-sigs=<2 3 4>; + arm,trig-in-types=; + arm,trig-conn-name = "ela_clus_0"; + }; + + trig-conns@2 { + reg = <2>; + arm,trig-in-sigs=<5 6 7>; + arm,trig-in-types=; + arm,trig-conn-name = "ela_clus_1"; + }; + }; }; diff --git a/dts/src/arm64/arm/juno-r1-scmi.dts b/dts/src/arm64/arm/juno-r1-scmi.dts index 190a0fba4a..dd9ea69f08 100644 --- a/dts/src/arm64/arm/juno-r1-scmi.dts +++ b/dts/src/arm64/arm/juno-r1-scmi.dts @@ -7,14 +7,18 @@ }; etf@20140000 { - power-domains = <&scmi_devpd 0>; + power-domains = <&scmi_devpd 8>; }; funnel@20150000 { - power-domains = <&scmi_devpd 0>; + power-domains = <&scmi_devpd 8>; }; }; +&cti_sys2 { + power-domains = <&scmi_devpd 8>; +}; + &A57_0 { clocks = <&scmi_dvfs 0>; }; diff --git a/dts/src/arm64/arm/juno-r1.dts b/dts/src/arm64/arm/juno-r1.dts index 0e24e29eb9..f099fb611d 100644 --- a/dts/src/arm64/arm/juno-r1.dts +++ b/dts/src/arm64/arm/juno-r1.dts @@ -9,6 +9,7 @@ /dts-v1/; #include +#include #include "juno-base.dtsi" #include "juno-cs-r1r2.dtsi" @@ -313,3 +314,27 @@ &cpu_debug5 { cpu = <&A53_3>; }; + +&cti0 { + cpu = <&A57_0>; +}; + +&cti1 { + cpu = <&A57_1>; +}; + +&cti2 { + cpu = <&A53_0>; +}; + +&cti3 { + cpu = <&A53_1>; +}; + +&cti4 { + cpu = <&A53_2>; +}; + +&cti5 { + cpu = <&A53_3>; +}; diff --git a/dts/src/arm64/arm/juno-r2-scmi.dts b/dts/src/arm64/arm/juno-r2-scmi.dts index dbf1377008..de2cbac1d1 100644 --- a/dts/src/arm64/arm/juno-r2-scmi.dts +++ b/dts/src/arm64/arm/juno-r2-scmi.dts @@ -7,14 +7,18 @@ }; etf@20140000 { - power-domains = <&scmi_devpd 0>; + power-domains = <&scmi_devpd 8>; }; funnel@20150000 { - power-domains = <&scmi_devpd 0>; + power-domains = <&scmi_devpd 8>; }; }; +&cti_sys2 { + power-domains = <&scmi_devpd 8>; +}; + &A72_0 { clocks = <&scmi_dvfs 0>; }; diff --git a/dts/src/arm64/arm/juno-r2.dts b/dts/src/arm64/arm/juno-r2.dts index e609420ce3..709389582a 100644 --- a/dts/src/arm64/arm/juno-r2.dts +++ b/dts/src/arm64/arm/juno-r2.dts @@ -9,6 +9,7 @@ /dts-v1/; #include +#include #include "juno-base.dtsi" #include "juno-cs-r1r2.dtsi" @@ -319,3 +320,27 @@ &cpu_debug5 { cpu = <&A53_3>; }; + +&cti0 { + cpu = <&A72_0>; +}; + +&cti1 { + cpu = <&A72_1>; +}; + +&cti2 { + cpu = <&A53_0>; +}; + +&cti3 { + cpu = <&A53_1>; +}; + +&cti4 { + cpu = <&A53_2>; +}; + +&cti5 { + cpu = <&A53_3>; +}; diff --git a/dts/src/arm64/arm/juno-scmi.dtsi b/dts/src/arm64/arm/juno-scmi.dtsi index d72dcff9bf..4135d62e44 100644 --- a/dts/src/arm64/arm/juno-scmi.dtsi +++ b/dts/src/arm64/arm/juno-scmi.dtsi @@ -154,6 +154,31 @@ power-domains = <&scmi_devpd 8>; }; +&cti0 { + power-domains = <&scmi_devpd 8>; +}; +&cti1 { + power-domains = <&scmi_devpd 8>; +}; +&cti2 { + power-domains = <&scmi_devpd 8>; +}; +&cti3 { + power-domains = <&scmi_devpd 8>; +}; +&cti4 { + power-domains = <&scmi_devpd 8>; +}; +&cti5 { + power-domains = <&scmi_devpd 8>; +}; +&cti_sys0 { + power-domains = <&scmi_devpd 8>; +}; +&cti_sys1 { + power-domains = <&scmi_devpd 8>; +}; + &gpu { clocks = <&scmi_dvfs 2>; power-domains = <&scmi_devpd 9>; diff --git a/dts/src/arm64/arm/juno.dts b/dts/src/arm64/arm/juno.dts index f00cffbd03..dbc22e70b6 100644 --- a/dts/src/arm64/arm/juno.dts +++ b/dts/src/arm64/arm/juno.dts @@ -9,6 +9,7 @@ /dts-v1/; #include +#include #include "juno-base.dtsi" / { @@ -295,3 +296,27 @@ &cpu_debug5 { cpu = <&A53_3>; }; + +&cti0 { + cpu = <&A57_0>; +}; + +&cti1 { + cpu = <&A57_1>; +}; + +&cti2 { + cpu = <&A53_0>; +}; + +&cti3 { + cpu = <&A53_1>; +}; + +&cti4 { + cpu = <&A53_2>; +}; + +&cti5 { + cpu = <&A53_3>; +}; diff --git a/dts/src/arm64/arm/rtsm_ve-motherboard-rs2.dtsi b/dts/src/arm64/arm/rtsm_ve-motherboard-rs2.dtsi index 33182d9e58..ec2d5280a3 100644 --- a/dts/src/arm64/arm/rtsm_ve-motherboard-rs2.dtsi +++ b/dts/src/arm64/arm/rtsm_ve-motherboard-rs2.dtsi @@ -10,17 +10,24 @@ arm,v2m-memory-map = "rs2"; iofpga-bus@300000000 { - virtio-p9@140000 { + virtio@140000 { compatible = "virtio,mmio"; reg = <0x140000 0x200>; interrupts = <43>; }; - virtio-net@150000 { + virtio@150000 { compatible = "virtio,mmio"; reg = <0x150000 0x200>; interrupts = <44>; }; + + virtio@200000 { + compatible = "virtio,mmio"; + reg = <0x200000 0x200>; + interrupts = <46>; + status = "disabled"; + }; }; }; }; diff --git a/dts/src/arm64/arm/rtsm_ve-motherboard.dtsi b/dts/src/arm64/arm/rtsm_ve-motherboard.dtsi index 5f6cab668a..ba8beef3fe 100644 --- a/dts/src/arm64/arm/rtsm_ve-motherboard.dtsi +++ b/dts/src/arm64/arm/rtsm_ve-motherboard.dtsi @@ -110,7 +110,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 3 0 0x200000>; + ranges = <0 3 0 0x210000>; v2m_sysreg: sysreg@10000 { compatible = "arm,vexpress-sysreg"; @@ -222,7 +222,7 @@ clock-names = "timclken1", "timclken2", "apb_pclk"; }; - virtio-block@130000 { + virtio@130000 { compatible = "virtio,mmio"; reg = <0x130000 0x200>; interrupts = <42>; diff --git a/dts/src/arm64/broadcom/northstar2/ns2-svk.dts b/dts/src/arm64/broadcom/northstar2/ns2-svk.dts index 12a4b1c033..e34172e311 100644 --- a/dts/src/arm64/broadcom/northstar2/ns2-svk.dts +++ b/dts/src/arm64/broadcom/northstar2/ns2-svk.dts @@ -203,7 +203,7 @@ &qspi { bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/dts/src/arm64/broadcom/northstar2/ns2-xmc.dts b/dts/src/arm64/broadcom/northstar2/ns2-xmc.dts index f00c21e076..7bf26f3e36 100644 --- a/dts/src/arm64/broadcom/northstar2/ns2-xmc.dts +++ b/dts/src/arm64/broadcom/northstar2/ns2-xmc.dts @@ -146,7 +146,7 @@ }; &qspi { - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/dts/src/arm64/broadcom/northstar2/ns2.dtsi b/dts/src/arm64/broadcom/northstar2/ns2.dtsi index f59fa3979a..fda97c47f4 100644 --- a/dts/src/arm64/broadcom/northstar2/ns2.dtsi +++ b/dts/src/arm64/broadcom/northstar2/ns2.dtsi @@ -289,8 +289,6 @@ , ; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&iprocslow>; clock-names = "apb_pclk"; }; diff --git a/dts/src/arm64/broadcom/stingray/bcm958742k.dts b/dts/src/arm64/broadcom/stingray/bcm958742k.dts index 77efa28c4d..dfac910a45 100644 --- a/dts/src/arm64/broadcom/stingray/bcm958742k.dts +++ b/dts/src/arm64/broadcom/stingray/bcm958742k.dts @@ -61,7 +61,7 @@ cs-gpios = <&gpio_hsls 34 0>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; @@ -76,7 +76,7 @@ cs-gpios = <&gpio_hsls 96 0>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/dts/src/arm64/broadcom/stingray/stingray.dtsi b/dts/src/arm64/broadcom/stingray/stingray.dtsi index 7f1b8efd08..09d4aa8ae1 100644 --- a/dts/src/arm64/broadcom/stingray/stingray.dtsi +++ b/dts/src/arm64/broadcom/stingray/stingray.dtsi @@ -556,8 +556,6 @@ , ; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&hsls_div2_clk>; clock-names = "apb_pclk"; iommus = <&smmu 0x6000 0x0000>; diff --git a/dts/src/arm64/exynos/exynos5433.dtsi b/dts/src/arm64/exynos/exynos5433.dtsi index 661567d2dd..75b548e495 100644 --- a/dts/src/arm64/exynos/exynos5433.dtsi +++ b/dts/src/arm64/exynos/exynos5433.dtsi @@ -806,7 +806,8 @@ }; timer@101c0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5433-mct", + "samsung,exynos4210-mct"; reg = <0x101c0000 0x800>; interrupts = , , @@ -1865,8 +1866,6 @@ clocks = <&cmu_fsys CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@15600000 { @@ -1876,8 +1875,6 @@ clocks = <&cmu_fsys CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; audio-subsystem@11400000 { @@ -1897,8 +1894,6 @@ clocks = <&cmu_aud CLK_ACLK_DMAC>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; power-domains = <&pd_aud>; }; diff --git a/dts/src/arm64/exynos/exynos7.dtsi b/dts/src/arm64/exynos/exynos7.dtsi index e38bb02a21..1cd771c90b 100644 --- a/dts/src/arm64/exynos/exynos7.dtsi +++ b/dts/src/arm64/exynos/exynos7.dtsi @@ -149,8 +149,6 @@ clocks = <&clock_fsys0 ACLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@10eb0000 { @@ -160,8 +158,6 @@ clocks = <&clock_fsys0 ACLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; clock_topc: clock-controller@10570000 { diff --git a/dts/src/arm64/exynos/exynos850-e850-96.dts b/dts/src/arm64/exynos/exynos850-e850-96.dts index 7b5a61d22c..f52a55f644 100644 --- a/dts/src/arm64/exynos/exynos850-e850-96.dts +++ b/dts/src/arm64/exynos/exynos850-e850-96.dts @@ -20,6 +20,11 @@ model = "WinLink E850-96 board"; compatible = "winlink,e850-96", "samsung,exynos850"; + aliases { + mmc0 = &mmc_0; + serial0 = &serial_0; + }; + chosen { stdout-path = &serial_0; }; diff --git a/dts/src/arm64/exynos/exynos850.dtsi b/dts/src/arm64/exynos/exynos850.dtsi index d1700e96fe..9076afd4bb 100644 --- a/dts/src/arm64/exynos/exynos850.dtsi +++ b/dts/src/arm64/exynos/exynos850.dtsi @@ -29,22 +29,6 @@ pinctrl3 = &pinctrl_hsi; pinctrl4 = &pinctrl_core; pinctrl5 = &pinctrl_peri; - mmc0 = &mmc_0; - serial0 = &serial_0; - serial1 = &serial_1; - serial2 = &serial_2; - i2c0 = &i2c_0; - i2c1 = &i2c_1; - i2c2 = &i2c_2; - i2c3 = &i2c_3; - i2c4 = &i2c_4; - i2c5 = &i2c_5; - i2c6 = &i2c_6; - i2c7 = &hsi2c_0; - i2c8 = &hsi2c_1; - i2c9 = &hsi2c_2; - i2c10 = &hsi2c_3; - i2c11 = &hsi2c_4; }; arm-pmu { @@ -181,7 +165,8 @@ }; timer@10040000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos850-mct", + "samsung,exynos4210-mct"; reg = <0x10040000 0x800>; interrupts = , , diff --git a/dts/src/arm64/exynos/exynosautov9-sadk.dts b/dts/src/arm64/exynos/exynosautov9-sadk.dts index 57518cb5e8..17e568853e 100644 --- a/dts/src/arm64/exynos/exynosautov9-sadk.dts +++ b/dts/src/arm64/exynos/exynosautov9-sadk.dts @@ -58,3 +58,7 @@ &usi_0 { status = "okay"; }; + +&xtcxo { + clock-frequency = <26000000>; +}; diff --git a/dts/src/arm64/exynos/exynosautov9.dtsi b/dts/src/arm64/exynos/exynosautov9.dtsi index 807d500d60..0ce46ec5cd 100644 --- a/dts/src/arm64/exynos/exynosautov9.dtsi +++ b/dts/src/arm64/exynos/exynosautov9.dtsi @@ -6,6 +6,7 @@ * */ +#include #include #include @@ -153,30 +154,8 @@ xtcxo: clock { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <26000000>; clock-output-names = "oscclk"; }; - - /* - * Keep the stub clock for serial driver, until proper clock - * driver is implemented. - */ - uart_clock: uart-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <133250000>; - clock-output-names = "uart"; - }; - - /* - * Keep the stub clock for ufs driver, until proper clock - * driver is implemented. - */ - ufs_core_clock: ufs-core-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <166562500>; - }; }; soc: soc@0 { @@ -190,6 +169,89 @@ reg = <0x10000000 0x24>; }; + cmu_peris: clock-controller@10020000 { + compatible = "samsung,exynosautov9-cmu-peris"; + reg = <0x10020000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_PERIS_BUS>; + clock-names = "oscclk", + "dout_clkcmu_peris_bus"; + }; + + cmu_peric0: clock-controller@10200000 { + compatible = "samsung,exynosautov9-cmu-peric0"; + reg = <0x10200000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_PERIC0_BUS>, + <&cmu_top DOUT_CLKCMU_PERIC0_IP>; + clock-names = "oscclk", + "dout_clkcmu_peric0_bus", + "dout_clkcmu_peric0_ip"; + }; + + cmu_peric1: clock-controller@10800000 { + compatible = "samsung,exynosautov9-cmu-peric1"; + reg = <0x10800000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_PERIC1_BUS>, + <&cmu_top DOUT_CLKCMU_PERIC1_IP>; + clock-names = "oscclk", + "dout_clkcmu_peric1_bus", + "dout_clkcmu_peric1_ip"; + }; + + cmu_fsys2: clock-controller@17c00000 { + compatible = "samsung,exynosautov9-cmu-fsys2"; + reg = <0x17c00000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_FSYS2_BUS>, + <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>, + <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>; + clock-names = "oscclk", + "dout_clkcmu_fsys2_bus", + "dout_fsys2_clkcmu_ufs_embd", + "dout_fsys2_clkcmu_ethernet"; + }; + + cmu_core: clock-controller@1b030000 { + compatible = "samsung,exynosautov9-cmu-core"; + reg = <0x1b030000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_CORE_BUS>; + clock-names = "oscclk", + "dout_clkcmu_core_bus"; + }; + + cmu_busmc: clock-controller@1b200000 { + compatible = "samsung,exynosautov9-cmu-busmc"; + reg = <0x1b200000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_BUSMC_BUS>; + clock-names = "oscclk", + "dout_clkcmu_busmc_bus"; + }; + + cmu_top: clock-controller@1b240000 { + compatible = "samsung,exynosautov9-cmu-top"; + reg = <0x1b240000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>; + clock-names = "oscclk"; + }; + gic: interrupt-controller@10101000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -271,7 +333,8 @@ #address-cells = <1>; #size-cells = <1>; ranges; - clocks = <&uart_clock>, <&uart_clock>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>; clock-names = "pclk", "ipclk"; status = "disabled"; @@ -282,7 +345,8 @@ interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&uart0_bus_dual>; - clocks = <&uart_clock>, <&uart_clock>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -308,8 +372,8 @@ <0x17dc0000 0x2200>; /* 3: UFS protector */ reg-names = "hci", "vs_hci", "unipro", "ufsp"; interrupts = ; - clocks = <&ufs_core_clock>, - <&ufs_core_clock>; + clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_ACLK>, + <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO>; clock-names = "core_clk", "sclk_unipro_main"; freq-table-hz = <0 0>, <0 0>; pinctrl-names = "default"; diff --git a/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts b/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts index c03f4e1833..4ab17b984b 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts @@ -311,10 +311,19 @@ status = "okay"; }; +&mscc_felix_port4 { + dsa-tag-protocol = "ocelot-8021q"; +}; + +&mscc_felix_port5 { + dsa-tag-protocol = "ocelot-8021q"; +}; + &usb0 { status = "okay"; }; &usb1 { + dr_mode = "host"; status = "okay"; }; diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts index 19d3952dbf..5baf060acf 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts @@ -382,9 +382,11 @@ }; &usb0 { + dr_mode = "host"; status = "okay"; }; &usb1 { + dr_mode = "host"; status = "okay"; }; diff --git a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts index 68c31cb8ee..e0cd1516d0 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts @@ -299,10 +299,10 @@ }; &usb0 { + dr_mode = "host"; status = "okay"; }; &usb1 { - dr_mode = "otg"; status = "okay"; }; diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi index 088271d491..92465f7776 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi @@ -599,7 +599,6 @@ compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = ; - dr_mode = "host"; snps,dis_rxdet_inp3_quirk; snps,quirk-frame-length-adjustment = <0x20>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; @@ -610,7 +609,6 @@ compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; interrupts = ; - dr_mode = "host"; snps,dis_rxdet_inp3_quirk; snps,quirk-frame-length-adjustment = <0x20>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; diff --git a/dts/src/arm64/freescale/fsl-ls1043a.dtsi b/dts/src/arm64/freescale/fsl-ls1043a.dtsi index 35d1939e69..21200cbf71 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1043a.dtsi @@ -335,7 +335,7 @@ <9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0xf 0x0>; }; }; @@ -389,8 +389,8 @@ big-endian; }; - ifc: ifc@1530000 { - compatible = "fsl,ifc", "simple-bus"; + ifc: memory-controller@1530000 { + compatible = "fsl,ifc"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = <0 43 0x4>; }; diff --git a/dts/src/arm64/freescale/fsl-ls1046a.dtsi b/dts/src/arm64/freescale/fsl-ls1046a.dtsi index 4e7bd04d97..0085e83adf 100644 --- a/dts/src/arm64/freescale/fsl-ls1046a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1046a.dtsi @@ -280,8 +280,8 @@ big-endian; }; - ifc: ifc@1530000 { - compatible = "fsl,ifc", "simple-bus"; + ifc: memory-controller@1530000 { + compatible = "fsl,ifc"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = ; status = "disabled"; @@ -341,7 +341,7 @@ <9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0xf 0x0>; }; }; diff --git a/dts/src/arm64/freescale/fsl-ls1088a.dtsi b/dts/src/arm64/freescale/fsl-ls1088a.dtsi index 18e5291184..f476b7d8b0 100644 --- a/dts/src/arm64/freescale/fsl-ls1088a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1088a.dtsi @@ -265,7 +265,7 @@ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0xf 0x0>; }; }; @@ -396,8 +396,8 @@ #interrupt-cells = <2>; }; - ifc: ifc@2240000 { - compatible = "fsl,ifc", "simple-bus"; + ifc: memory-controller@2240000 { + compatible = "fsl,ifc"; reg = <0x0 0x2240000 0x0 0x20000>; interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; little-endian; diff --git a/dts/src/arm64/freescale/fsl-ls208xa-qds.dtsi b/dts/src/arm64/freescale/fsl-ls208xa-qds.dtsi index 10d2fe0919..6fab73d484 100644 --- a/dts/src/arm64/freescale/fsl-ls208xa-qds.dtsi +++ b/dts/src/arm64/freescale/fsl-ls208xa-qds.dtsi @@ -104,21 +104,21 @@ &dspi { status = "okay"; - dflash0: n25q128a@0 { + dflash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <3000000>; reg = <0>; }; - dflash1: sst25wf040b@1 { + dflash1: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <3000000>; reg = <1>; }; - dflash2: en25s64@2 { + dflash2: flash@2 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; @@ -129,7 +129,7 @@ &qspi { status = "okay"; - flash0: s25fl256s1@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; @@ -138,7 +138,7 @@ spi-tx-bus-width = <4>; reg = <0>; }; - flash2: s25fl256s1@2 { + flash2: flash@2 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; diff --git a/dts/src/arm64/freescale/fsl-ls208xa-rdb.dtsi b/dts/src/arm64/freescale/fsl-ls208xa-rdb.dtsi index 4b71c4fcb3..f8135c5c25 100644 --- a/dts/src/arm64/freescale/fsl-ls208xa-rdb.dtsi +++ b/dts/src/arm64/freescale/fsl-ls208xa-rdb.dtsi @@ -100,7 +100,7 @@ &dspi { status = "okay"; - dflash0: n25q512a@0 { + dflash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; diff --git a/dts/src/arm64/freescale/fsl-ls208xa.dtsi b/dts/src/arm64/freescale/fsl-ls208xa.dtsi index 1282b61da8..4ba1e0499d 100644 --- a/dts/src/arm64/freescale/fsl-ls208xa.dtsi +++ b/dts/src/arm64/freescale/fsl-ls208xa.dtsi @@ -305,7 +305,7 @@ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0xf 0x0>; }; }; @@ -1036,8 +1036,8 @@ QORIQ_CLK_PLL_DIV(4)>; }; - ifc: ifc@2240000 { - compatible = "fsl,ifc", "simple-bus"; + ifc: memory-controller@2240000 { + compatible = "fsl,ifc"; reg = <0x0 0x2240000 0x0 0x20000>; interrupts = <0 21 0x4>; /* Level high type */ little-endian; diff --git a/dts/src/arm64/freescale/fsl-lx2160a.dtsi b/dts/src/arm64/freescale/fsl-lx2160a.dtsi index c5daa15b02..47ea854720 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a.dtsi +++ b/dts/src/arm64/freescale/fsl-lx2160a.dtsi @@ -698,7 +698,7 @@ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0xf 0x0>; }; }; @@ -909,7 +909,7 @@ QORIQ_CLK_PLL_DIV(8)>, <&clockgen QORIQ_CLK_SYSCLK 0>; clock-names = "ipg", "per"; - fsl,clk-source = <0>; + fsl,clk-source = /bits/ 8 <0>; status = "disabled"; }; @@ -921,7 +921,7 @@ QORIQ_CLK_PLL_DIV(8)>, <&clockgen QORIQ_CLK_SYSCLK 0>; clock-names = "ipg", "per"; - fsl,clk-source = <0>; + fsl,clk-source = /bits/ 8 <0>; status = "disabled"; }; diff --git a/dts/src/arm64/freescale/imx8-ss-vpu.dtsi b/dts/src/arm64/freescale/imx8-ss-vpu.dtsi new file mode 100644 index 0000000000..c6540768bd --- /dev/null +++ b/dts/src/arm64/freescale/imx8-ss-vpu.dtsi @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 NXP + * Dong Aisheng + */ + +vpu: vpu@2c000000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x2c000000 0x0 0x2c000000 0x2000000>; + reg = <0 0x2c000000 0 0x1000000>; + power-domains = <&pd IMX_SC_R_VPU>; + status = "disabled"; + + mu_m0: mailbox@2d000000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d000000 0x20000>; + interrupts = ; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_0>; + status = "disabled"; + }; + + mu1_m0: mailbox@2d020000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d020000 0x20000>; + interrupts = ; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_1>; + status = "disabled"; + }; + + mu2_m0: mailbox@2d040000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d040000 0x20000>; + interrupts = ; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_2>; + status = "disabled"; + }; + + vpu_core0: vpu-core@2d080000 { + reg = <0x2d080000 0x10000>; + compatible = "nxp,imx8q-vpu-decoder"; + power-domains = <&pd IMX_SC_R_VPU_DEC_0>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu_m0 0 0>, + <&mu_m0 0 1>, + <&mu_m0 1 0>; + status = "disabled"; + }; + + vpu_core1: vpu-core@2d090000 { + reg = <0x2d090000 0x10000>; + compatible = "nxp,imx8q-vpu-encoder"; + power-domains = <&pd IMX_SC_R_VPU_ENC_0>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu1_m0 0 0>, + <&mu1_m0 0 1>, + <&mu1_m0 1 0>; + status = "disabled"; + }; + + vpu_core2: vpu-core@2d0a0000 { + reg = <0x2d0a0000 0x10000>; + compatible = "nxp,imx8q-vpu-encoder"; + power-domains = <&pd IMX_SC_R_VPU_ENC_1>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu2_m0 0 0>, + <&mu2_m0 0 1>, + <&mu2_m0 1 0>; + status = "disabled"; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mm-beacon-baseboard.dtsi b/dts/src/arm64/freescale/imx8mm-beacon-baseboard.dtsi index ec3f2c1770..f338a886d8 100644 --- a/dts/src/arm64/freescale/imx8mm-beacon-baseboard.dtsi +++ b/dts/src/arm64/freescale/imx8mm-beacon-baseboard.dtsi @@ -278,6 +278,7 @@ pinctrl-0 = <&pinctrl_uart3>; assigned-clocks = <&clk IMX8MM_CLK_UART3>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + uart-has-rtscts; status = "okay"; }; @@ -386,6 +387,8 @@ fsl,pins = < MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40 MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40 + MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x40 + MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x40 >; }; diff --git a/dts/src/arm64/freescale/imx8mm-data-modul-edm-sbc.dts b/dts/src/arm64/freescale/imx8mm-data-modul-edm-sbc.dts new file mode 100644 index 0000000000..778bdbe228 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mm-data-modul-edm-sbc.dts @@ -0,0 +1,997 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Marek Vasut + */ + +/dts-v1/; + +#include +#include +#include "imx8mm.dtsi" + +/ { + model = "Data Modul i.MX8M Mini eDM SBC"; + compatible = "dmo,imx8mm-data-modul-edm-sbc", "fsl,imx8mm"; + + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart3; + }; + + memory@40000000 { + device_type = "memory"; + /* There are 1/2/4 GiB options, adjusted by bootloader. */ + reg = <0x0 0x40000000 0 0x40000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_backlight>; + brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + pwms = <&pwm1 0 5000000 0>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + clk_xtal25: clk-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + panel: panel { + backlight = <&backlight>; + power-supply = <®_panel_vcc>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + reg_panel_vcc: regulator-panel-vcc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_vcc_reg>; + regulator-name = "PANEL_VCC"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 6 0>; + enable-active-high; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + reg_usdhc2_vcc: regulator-usdhc2-vcc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vcc_reg>; + regulator-name = "V_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 0>; + enable-active-high; + }; + + watchdog-gpio { + /* TPS3813 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_watchdog_gpio>; + compatible = "linux,wdt-gpio"; + always-enabled; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + hw_algo = "level"; + /* Reset triggers in 2..3 seconds */ + hw_margin_ms = <1500>; + /* Disabled by default */ + status = "disabled"; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { /* W25Q128FVSI */ + compatible = "jedec,spi-nor"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&ecspi2 { /* Feature connector SPI */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + /* Disabled by default, unless feature board plugged in. */ + status = "disabled"; +}; + +&ecspi3 { /* Display connector SPI */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <&fec1_phy>; + phy-supply = <&buck4_reg>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8031 PHY */ + fec1_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + /* + * Dedicated ENET_WOL# signal is unused, the PHY + * can wake the SoC up via INT signal as well. + */ + interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + qca,clk-out-frequency = <125000000>; + qca,clk-out-strength = ; + qca,keep-pll-enabled; + vddio-supply = <&vddio>; + + vddio: vddio-regulator { + regulator-name = "VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddh: vddh-regulator { + regulator-name = "VDDH"; + }; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "ENET_RST#", "WDOG_B#", "PMIC_INT#", + "", "M2-B_PCIE_RST#", "M2-B_PCIE_WAKE#", "RTC_IRQ#", + "WDOG_KICK#", "M2-B_PCIE_CLKREQ#", + "USB1_OTG_ID_3V3", "ENET_WOL#", + "", "", "", "ENET_INT#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "MEMCFG2", "MEMCFG1", "DSI_RESET_1V8#", "DSI_IRQ_1V8#", + "M2-B_FULL_CARD_PWROFF_1V8#", "EEPROM_WP_1V8#", + "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#", "GRAPHICS_PRSNT_1V8#", + "MEMCFG0", "WDOG_EN", + "M2-B_W_DISABLE1_WWAN_1V8#", "M2-B_W_DISABLE2_GPS_1V8#", + "", "", "", "", + "", "", "", "SD2_RESET#", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "", + "", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8", + "CSI_PD_1V8", "CSI_RESET_1V8#", "", "", + "", "", "", "", + "", "", "", "M2-B_WAKE_WWAN_1V8#", + "M2-B_RESET_1V8#", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "NC0", "NC1", "BOOTCFG0", "BOOTCFG1", + "BOOTCFG2", "BOOTCFG3", "BOOTCFG4", "BOOTCFG5", + "BOOTCFG6", "BOOTCFG7", "NC10", "NC11", + "BOOTCFG8", "BOOTCFG9", "BOOTCFG10", "BOOTCFG11", + "BOOTCFG12", "BOOTCFG13", "BOOTCFG14", "BOOTCFG15", + "NC20", "", "", "", + "", "CAN_INT#", "CAN_RST#", "GPIO4_IO27", + "DIS_USB_DN2", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "DIS_USB_DN1", "USBHUB_RESET#", "GPIO5_IO03", + "GPIO5_IO04", "", "", "", + "", "SPI1_CS#", "", "", + "", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3", + "I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3", + "I2C4_SCL_3V3", "I2C4_SDA_3V3", "", "", + "", "SPI3_CS#", "", "", "", "", "", ""; +}; + +&i2c1 { + /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic: pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + rohm,reset-snvs-powered; + + /* + * i.MX 8M Mini Data Sheet for Consumer Products + * 3.1.3 Operating ranges + * MIMX8MM4DVTLZAA + */ + regulators { + /* VDD_SOC */ + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + /* VDD_ARM */ + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <950000>; + }; + + /* VDD_DRAM, BUCK5 */ + buck3_reg: BUCK3 { + regulator-name = "buck3"; + /* 1.5 GHz DDR bus clock */ + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 3V3_VDD, BUCK6 */ + buck4_reg: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V8_VDD, BUCK7 */ + buck5_reg: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V1_NVCC_DRAM, BUCK8 */ + buck6_reg: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V8_NVCC_SNVS */ + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 0V8_VDD_SNVS */ + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V8_VDDA */ + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 0V9_VDD_PHY */ + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V2_VDD_PHY */ + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + usb-hub@2c { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_hub>; + compatible = "microchip,usb2514bi"; + reg = <0x2c>; + individual-port-switching; + reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + self-powered; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc: rtc@68 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + compatible = "st,m41t62"; + reg = <0x68>; + interrupts-extended = <&gpio1 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pcieclk: clk@6a { + compatible = "renesas,9fgv0241"; + reg = <0x6a>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; +}; + +&i2c3 { /* Display connector I2C */ + /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ + clock-frequency = <320000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c4 { /* Feature connector I2C */ + /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ + clock-frequency = <320000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>, + <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>, + <&pinctrl_panel_expansion>; + + pinctrl_ecspi1: ecspi1-grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x44 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x44 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x44 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40 + >; + }; + + pinctrl_ecspi2: ecspi2-grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x44 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x44 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x44 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 + >; + }; + + pinctrl_ecspi3: ecspi3-grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x44 + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x44 + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x44 + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x40 + >; + }; + + pinctrl_fec1: fec1-grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + /* ENET_RST# */ + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x6 + /* ENET_WOL# */ + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x40000090 + /* ENET_INT# */ + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000090 + >; + }; + + pinctrl_hog_feature: hog-feature-grp { + fsl,pins = < + /* GPIO4_IO27 */ + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000006 + /* GPIO5_IO03 */ + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000006 + /* GPIO5_IO04 */ + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000006 + + /* CAN_INT# */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000090 + /* CAN_RST# */ + MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x26 + >; + }; + + pinctrl_hog_panel: hog-panel-grp { + fsl,pins = < + /* GRAPHICS_GPIO0_1V8 */ + MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x26 + >; + }; + + pinctrl_hog_misc: hog-misc-grp { + fsl,pins = < + /* PG_V_IN_VAR# */ + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000000 + /* CSI_PD_1V8 */ + MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x0 + /* CSI_RESET_1V8# */ + MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9 0x0 + + /* DIS_USB_DN1 */ + MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x0 + /* DIS_USB_DN2 */ + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x0 + + /* EEPROM_WP_1V8# */ + MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5 0x100 + /* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */ + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x0 + /* GRAPHICS_PRSNT_1V8# */ + MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x40000000 + + /* CLK_CCM_CLKO1_3V3 */ + MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x10 + >; + }; + + pinctrl_hog_sbc: hog-sbc-grp { + fsl,pins = < + /* MEMCFG[0..2] straps */ + MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000140 + MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x40000140 + MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x40000140 + + /* BOOT_CFG[0..15] straps */ + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000000 + MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x40000000 + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000000 + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x40000000 + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000000 + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000000 + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000000 + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x40000000 + MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x40000000 + MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x40000000 + MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000000 + MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x40000000 + MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x40000000 + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x40000000 + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x40000000 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x40000000 + + /* Not connected pins */ + MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x0 + MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x0 + MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x0 + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x0 + MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x0 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000084 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000084 + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x84 + MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x84 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000084 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000084 + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x84 + MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x84 + >; + }; + + pinctrl_i2c3: i2c3-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000084 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000084 + >; + }; + + pinctrl_i2c3_gpio: i2c3-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x84 + MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x84 + >; + }; + + pinctrl_i2c4: i2c4-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000084 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000084 + >; + }; + + pinctrl_i2c4_gpio: i2c4-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x84 + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x84 + >; + }; + + pinctrl_panel_backlight: panel-backlight-grp { + fsl,pins = < + /* BL_ENABLE_1V8 */ + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x104 + >; + }; + + pinctrl_panel_expansion: panel-expansion-grp { + fsl,pins = < + /* DSI_RESET_1V8# */ + MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x2 + /* DSI_IRQ_1V8# */ + MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x40000090 + >; + }; + + pinctrl_panel_vcc_reg: panel-vcc-grp { + fsl,pins = < + /* TFT_ENABLE_1V8 */ + MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x104 + >; + }; + + pinctrl_panel_pwm: panel-pwm-grp { + fsl,pins = < + /* BL_PWM_3V3 */ + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x12 + >; + }; + + pinctrl_pcie0: pcie-grp { + fsl,pins = < + /* M2-B_RESET_1V8# */ + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x102 + /* M2-B_PCIE_RST# */ + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x2 + /* M2-B_FULL_CARD_PWROFF_1V8# */ + MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4 0x102 + /* M2-B_W_DISABLE1_WWAN_1V8# */ + MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x102 + /* M2-B_W_DISABLE2_GPS_1V8# */ + MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x102 + /* CLK_M2_32K768 */ + MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x14 + /* M2-B_WAKE_WWAN_1V8# */ + MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x40000140 + /* M2-B_PCIE_WAKE# */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000140 + /* M2-B_PCIE_CLKREQ# */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000140 + >; + }; + + pinctrl_pmic: pmic-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x40000090 + >; + }; + + pinctrl_rtc: rtc-grp { + fsl,pins = < + /* RTC_IRQ# */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000090 + >; + }; + + pinctrl_sai5: sai5-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0x100 + MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x0 + MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x100 + MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x100 + MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x100 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x90 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x90 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x50 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x50 + >; + }; + + pinctrl_uart2: uart2-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x50 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x90 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x50 + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x90 + >; + }; + + pinctrl_uart3: uart3-grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x40 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x40 + >; + }; + + pinctrl_uart4: uart4-grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x40 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x40 + >; + }; + + pinctrl_usb_hub: usb-hub-grp { + fsl,pins = < + /* USBHUB_RESET# */ + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x4 + >; + }; + + pinctrl_usb_otg1: usb-otg1-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x40000000 + MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x4 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x40000090 + >; + }; + + pinctrl_usdhc2_vcc_reg: usdhc2-vcc-reg-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x4 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 + MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 + MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 + MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40 + >; + }; + + pinctrl_watchdog_gpio: watchdog-gpio-grp { + fsl,pins = < + /* WDOG_B# */ + MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2 0x26 + /* WDOG_EN -- ungate WDT RESET# signal propagation */ + MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x6 + /* WDOG_KICK# / WDI */ + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x26 + >; + }; +}; + +&pcie_phy { + fsl,clkreq-unsupported; /* CLKREQ_B is not connected to suitable input */ + fsl,refclk-pad-mode = ; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + clocks = <&pcieclk 0>; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcieclk 0>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_pwm>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; +}; + +&sai5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai5>; + fsl,sai-mclk-direction-output; + /* Input into codec PLL */ + assigned-clocks = <&clk IMX8MM_CLK_SAI5>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>; + assigned-clock-rates = <22579200>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; +}; + +&uart3 { /* A53 Debug */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { /* M4 Debug */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + /* UART4 is reserved for CM and RDC blocks CA access to UART4. */ + status = "disabled"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { /* MicroSD */ + assigned-clocks = <&clk IMX8MM_CLK_USDHC2_ROOT>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vcc>; + status = "okay"; +}; + +&usdhc3 { /* eMMC */ + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + vmmc-supply = <&buck4_reg>; + vqmmc-supply = <&buck5_reg>; + status = "okay"; +}; + +&wdog1 { + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/imx8mm-emcon.dtsi b/dts/src/arm64/freescale/imx8mm-emcon.dtsi index 7c4af71baa..0dbdc9ec3f 100644 --- a/dts/src/arm64/freescale/imx8mm-emcon.dtsi +++ b/dts/src/arm64/freescale/imx8mm-emcon.dtsi @@ -98,7 +98,7 @@ pinctrl-1 = <&pinctrl_flexspi1>; status = "okay"; - flash0: spi-flash@0 { + flash0: flash@0 { reg = <0>; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm64/freescale/imx8mm-evk.dtsi b/dts/src/arm64/freescale/imx8mm-evk.dtsi index 6d67df7692..c42b966f7a 100644 --- a/dts/src/arm64/freescale/imx8mm-evk.dtsi +++ b/dts/src/arm64/freescale/imx8mm-evk.dtsi @@ -59,6 +59,14 @@ enable-active-high; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <250>; + }; + ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; @@ -395,6 +403,12 @@ status = "okay"; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + status = "okay"; +}; + &iomuxc { pinctrl_fec1: fec1grp { fsl,pins = < @@ -549,4 +563,10 @@ MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166 >; }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x06 + >; + }; }; diff --git a/dts/src/arm64/freescale/imx8mm-kontron-n801x-s.dts b/dts/src/arm64/freescale/imx8mm-kontron-n801x-s.dts index d40caf14ac..23be1ec538 100644 --- a/dts/src/arm64/freescale/imx8mm-kontron-n801x-s.dts +++ b/dts/src/arm64/freescale/imx8mm-kontron-n801x-s.dts @@ -182,7 +182,7 @@ #address-cells = <1>; #size-cells = <0>; - usbnet: usbether@1 { + usbnet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; local-mac-address = [ 00 00 00 00 00 00 ]; diff --git a/dts/src/arm64/freescale/imx8mm-kontron-n801x-som.dtsi b/dts/src/arm64/freescale/imx8mm-kontron-n801x-som.dtsi index 22a5ef771d..8f90eb0255 100644 --- a/dts/src/arm64/freescale/imx8mm-kontron-n801x-som.dtsi +++ b/dts/src/arm64/freescale/imx8mm-kontron-n801x-som.dtsi @@ -66,7 +66,7 @@ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; spi-max-frequency = <80000000>; reg = <0>; diff --git a/dts/src/arm64/freescale/imx8mm-mx8menlo.dts b/dts/src/arm64/freescale/imx8mm-mx8menlo.dts new file mode 100644 index 0000000000..92eaf4ef45 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mm-mx8menlo.dts @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2021-2022 Marek Vasut + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" + +/ { + model = "MENLO MX8MM EMBEDDED DEVICE"; + compatible = "menlo,mx8menlo", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; + + /delete-node/ gpio-keys; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user1 { + label = "TestLed601"; + gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + + user2 { + label = "TestLed602"; + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + beeper { + compatible = "gpio-beeper"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_beeper>; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; + }; + + /* Fixed clock dedicated to SPI CAN on carrier board */ + clk_xtal20: clk-xtal20 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + }; +}; + +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* CAN controller on the baseboard */ + canfd: can@0 { + compatible = "microchip,mcp2518fd"; + clocks = <&clk_xtal20>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + reg = <0>; + spi-max-frequency = <2000000>; + }; + +}; + +&ecspi2 { + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_gpio1>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 4 GPIO_ACTIVE_LOW>; + status = "okay"; + + spidev@0 { + compatible = "menlo,m53cpld"; + reg = <0>; + spi-max-frequency = <25000000>; + }; + + spidev@1 { + compatible = "menlo,m53cpld"; + reg = <1>; + spi-max-frequency = <25000000>; + }; + +}; + +ðphy0 { + max-speed = <100>; +}; + +&fec1 { + status = "okay"; +}; + +&flexspi { + status = "okay"; + + flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + +&gpio1 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "DISP_reset", "KBD_intI", + "", "", "", "", + "", "", "", ""; +}; + +&gpio4 { + /* + * CPLD_D[n] is ARM_CPLD[n] in schematic + * CPLD_int is SA_INTERRUPT in schematic + * CPLD_reset is RESET_SOFT in schematic + */ + gpio-line-names = + "CPLD_D[1]", "CPLD_int", "CPLD_reset", "", + "", "CPLD_D[0]", "", "", + "", "", "", "CPLD_D[2]", + "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", "CPLD_D[6]", + "CPLD_D[7]", "", "", "", + "", "", "", "", + "", "", "", "KBD_intK", + "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio_expander_21 { + status = "okay"; +}; + +&hwmon { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + /* None of this is present on the SoM. */ + /delete-node/ bridge@2c; + /delete-node/ hdmi@48; + /delete-node/ touch@4a; + /delete-node/ sensor@4f; + /delete-node/ eeprom@50; + /delete-node/ eeprom@57; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_gpio7>, <&pinctrl_gpio_hog1>, + <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>; + + pinctrl_beeper: beepergrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x1c4 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x4 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x4 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x1c4 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x1c4 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1c4 + MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x1c4 + >; + }; + + pinctrl_uart4_rts: uart4rtsgrp { + fsl,pins = < + /* SODIMM 222 */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x184 + >; + }; +}; + +&pinctrl_gpio1 { + fsl,pins = < + /* SODIMM 206 */ + MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x1c4 + >; +}; + +&pinctrl_gpio_hog1 { + fsl,pins = < + /* SODIMM 88 */ + MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1c4 + /* CPLD_int */ + MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x1c4 + /* CPLD_reset */ + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x1c4 + /* SODIMM 94 */ + MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x1c4 + /* SODIMM 96 */ + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4 + /* CPLD_D[7] */ + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x1c4 + /* CPLD_D[6] */ + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x1c4 + /* CPLD_D[5] */ + MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x1c4 + /* CPLD_D[4] */ + MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x1c4 + /* CPLD_D[3] */ + MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x1c4 + /* CPLD_D[2] */ + MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x1c4 + /* CPLD_D[1] */ + MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x1c4 + /* CPLD_D[0] */ + MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x1c4 + /* KBD_intK */ + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1c4 + /* DISP_reset */ + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x1c4 + /* KBD_intI */ + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x1c4 + /* SODIMM 46 */ + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x1c4 + >; +}; + +&pinctrl_uart1 { + fsl,pins = < + /* SODIMM 149 */ + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1c4 + /* SODIMM 147 */ + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1c4 + /* SODIMM 210 */ + MX8MM_IOMUXC_UART3_RXD_UART1_DTE_RTS_B 0x1c4 + /* SODIMM 212 */ + MX8MM_IOMUXC_UART3_TXD_UART1_DTE_CTS_B 0x1c4 + >; +}; + +®_usb_otg1_vbus { + /delete-property/ enable-active-high; + gpio = <&gpio1 12 GPIO_ACTIVE_LOW>; +}; + +®_usb_otg2_vbus { + /delete-property/ enable-active-high; + gpio = <&gpio1 14 GPIO_ACTIVE_LOW>; +}; + +&sai2 { + status = "disabled"; +}; + +&uart1 { + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + pinctrl-0 = <&pinctrl_uart4 &pinctrl_uart4_rts>; + linux,rs485-enabled-at-boot-time; + rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi b/dts/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi index cce55c3c5d..c557dbf4dc 100644 --- a/dts/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi +++ b/dts/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi @@ -112,6 +112,7 @@ fsl,refclk-pad-mode = ; fsl,clkreq-unsupported; clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw72xx.dtsi b/dts/src/arm64/freescale/imx8mm-venice-gw72xx.dtsi index f61e4847fa..41d0de6a70 100644 --- a/dts/src/arm64/freescale/imx8mm-venice-gw72xx.dtsi +++ b/dts/src/arm64/freescale/imx8mm-venice-gw72xx.dtsi @@ -134,6 +134,7 @@ fsl,refclk-pad-mode = ; fsl,clkreq-unsupported; clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw73xx.dtsi b/dts/src/arm64/freescale/imx8mm-venice-gw73xx.dtsi index 0236196489..244ef8d6cc 100644 --- a/dts/src/arm64/freescale/imx8mm-venice-gw73xx.dtsi +++ b/dts/src/arm64/freescale/imx8mm-venice-gw73xx.dtsi @@ -154,6 +154,7 @@ fsl,refclk-pad-mode = ; fsl,clkreq-unsupported; clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; @@ -221,6 +222,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>; cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; bluetooth { diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts b/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts index 7e72310462..24737e8903 100644 --- a/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts +++ b/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts @@ -678,6 +678,7 @@ fsl,refclk-pad-mode = ; fsl,clkreq-unsupported; clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; @@ -716,6 +717,7 @@ dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -731,6 +733,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -739,6 +742,7 @@ pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>; cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -1087,15 +1091,3 @@ >; }; }; - -&cpu_alert0 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; -}; - -&cpu_crit0 { - temperature = <105000>; - hysteresis = <2000>; - type = "critical"; -}; diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw7902.dts b/dts/src/arm64/freescale/imx8mm-venice-gw7902.dts index edf0c7aaae..407ab4592b 100644 --- a/dts/src/arm64/freescale/imx8mm-venice-gw7902.dts +++ b/dts/src/arm64/freescale/imx8mm-venice-gw7902.dts @@ -394,6 +394,13 @@ gw,voltage-divider-ohms = <10000 10000>; }; + channel@9c { + gw,mode = <2>; + reg = <0x9c>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + channel@a2 { gw,mode = <2>; reg = <0xa2>; @@ -595,7 +602,8 @@ &pcie_phy { fsl,refclk-pad-mode = ; fsl,clkreq-unsupported; - clocks = <&clk IMX8MM_CLK_DUMMY>; + clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; @@ -604,8 +612,8 @@ pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&clk IMX8MM_CLK_DUMMY>, <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; @@ -644,6 +652,7 @@ pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -660,6 +669,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; bluetooth { @@ -677,6 +687,7 @@ dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw7903.dts b/dts/src/arm64/freescale/imx8mm-venice-gw7903.dts index 1deb2ea8fc..a7dae9bd4c 100644 --- a/dts/src/arm64/freescale/imx8mm-venice-gw7903.dts +++ b/dts/src/arm64/freescale/imx8mm-venice-gw7903.dts @@ -540,6 +540,7 @@ fsl,refclk-pad-mode = ; fsl,clkreq-unsupported; clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi b/dts/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi index aca5ae0d30..c2a5c2f7b2 100644 --- a/dts/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi +++ b/dts/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi @@ -114,7 +114,7 @@ status = "okay"; }; -/* VERDIN I2S_1 */ +/* Verdin I2S_1 */ &sai2 { status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8mm-verdin-wifi.dtsi b/dts/src/arm64/freescale/imx8mm-verdin-wifi.dtsi index 3e06a6ce34..017db9eab2 100644 --- a/dts/src/arm64/freescale/imx8mm-verdin-wifi.dtsi +++ b/dts/src/arm64/freescale/imx8mm-verdin-wifi.dtsi @@ -17,19 +17,6 @@ }; }; -/* On-module Wi-Fi */ -&usdhc3 { - bus-width = <4>; - keep-power-in-suspend; - non-removable; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>; - vmmc-supply = <®_wifi_en>; - status = "okay"; -}; - &gpio3 { gpio-line-names = "SODIMM_52", "SODIMM_54", @@ -92,3 +79,16 @@ "SODIMM_135", "SODIMM_129"; }; + +/* On-module Wi-Fi */ +&usdhc3 { + bus-width = <4>; + keep-power-in-suspend; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>; + vmmc-supply = <®_wifi_en>; + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/imx8mm-verdin.dtsi b/dts/src/arm64/freescale/imx8mm-verdin.dtsi index 0d84d29e70..eafa88d980 100644 --- a/dts/src/arm64/freescale/imx8mm-verdin.dtsi +++ b/dts/src/arm64/freescale/imx8mm-verdin.dtsi @@ -86,7 +86,7 @@ regulator-boot-on; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; - regulator-name = "+V3.3_ETH"; + regulator-name = "On-module +V3.3_ETH"; startup-delay-us = <200000>; }; @@ -99,7 +99,7 @@ pinctrl-0 = <&pinctrl_reg_usb1_en>; regulator-max-microvolt = <5000000>; regulator-min-microvolt = <5000000>; - regulator-name = "usb_otg1_vbus"; + regulator-name = "USB_1_EN"; }; reg_usb_otg2_vbus: regulator-usb-otg2 { @@ -111,7 +111,7 @@ pinctrl-0 = <&pinctrl_reg_usb2_en>; regulator-max-microvolt = <5000000>; regulator-min-microvolt = <5000000>; - regulator-name = "usb_otg2_vbus"; + regulator-name = "USB_2_EN"; }; reg_usdhc2_vmmc: regulator-usdhc2 { @@ -306,7 +306,7 @@ "SODIMM_151", "SODIMM_153"; - ctrl_sleep_moci-hog { + ctrl-sleep-moci-hog { gpio-hog; /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ gpios = <1 GPIO_ACTIVE_HIGH>; @@ -337,6 +337,11 @@ reg = <0x25>; sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + /* + * The bootloader is expected to switch on the I2C level shifter for the TLA2024 ADC + * behind this PMIC. + */ + regulators { reg_vdd_soc: BUCK1 { nxp,dvs-run-voltage = <850000>; @@ -345,7 +350,7 @@ regulator-boot-on; regulator-max-microvolt = <850000>; regulator-min-microvolt = <800000>; - regulator-name = "+VDD_SOC"; + regulator-name = "On-module +VDD_SOC (BUCK1)"; regulator-ramp-delay = <3125>; }; @@ -356,7 +361,7 @@ regulator-boot-on; regulator-max-microvolt = <950000>; regulator-min-microvolt = <850000>; - regulator-name = "+VDD_ARM"; + regulator-name = "On-module +VDD_ARM (BUCK2)"; regulator-ramp-delay = <3125>; }; @@ -365,7 +370,7 @@ regulator-boot-on; regulator-max-microvolt = <950000>; regulator-min-microvolt = <850000>; - regulator-name = "+VDD_GPU_VPU_DDR"; + regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)"; }; reg_vdd_3v3: BUCK4 { @@ -373,7 +378,7 @@ regulator-boot-on; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; - regulator-name = "+V3.3"; + regulator-name = "On-module +V3.3 (BUCK4)"; }; reg_vdd_1v8: BUCK5 { @@ -381,7 +386,7 @@ regulator-boot-on; regulator-max-microvolt = <1800000>; regulator-min-microvolt = <1800000>; - regulator-name = "PWR_1V8_MOCI"; + regulator-name = "PWR_1V8_MOCI (BUCK5)"; }; reg_nvcc_dram: BUCK6 { @@ -389,7 +394,7 @@ regulator-boot-on; regulator-max-microvolt = <1100000>; regulator-min-microvolt = <1100000>; - regulator-name = "+VDD_DDR"; + regulator-name = "On-module +VDD_DDR (BUCK6)"; }; reg_nvcc_snvs: LDO1 { @@ -397,7 +402,7 @@ regulator-boot-on; regulator-max-microvolt = <1800000>; regulator-min-microvolt = <1800000>; - regulator-name = "+V1.8_SNVS"; + regulator-name = "On-module +V1.8_SNVS (LDO1)"; }; reg_vdd_snvs: LDO2 { @@ -405,7 +410,7 @@ regulator-boot-on; regulator-max-microvolt = <900000>; regulator-min-microvolt = <800000>; - regulator-name = "+V0.8_SNVS"; + regulator-name = "On-module +V0.8_SNVS (LDO2)"; }; reg_vdda: LDO3 { @@ -413,7 +418,7 @@ regulator-boot-on; regulator-max-microvolt = <1800000>; regulator-min-microvolt = <1800000>; - regulator-name = "+V1.8A"; + regulator-name = "On-module +V1.8A (LDO3)"; }; reg_vdd_phy: LDO4 { @@ -421,13 +426,13 @@ regulator-boot-on; regulator-max-microvolt = <900000>; regulator-min-microvolt = <900000>; - regulator-name = "+V0.9_MIPI"; + regulator-name = "On-module +V0.9_MIPI (LDO4)"; }; reg_nvcc_sd: LDO5 { regulator-max-microvolt = <3300000>; regulator-min-microvolt = <1800000>; - regulator-name = "+V3.3_1.8_SD"; + regulator-name = "On-module +V3.3_1.8_SD (LDO5)"; }; }; }; @@ -580,8 +585,10 @@ atmel_mxt_ts: touch@4a { compatible = "atmel,maxtouch"; - /* Verdin GPIO_9_DSI */ - /* (TOUCH_INT#, SODIMM 17, also routed to SN65dsi83 IRQ albeit currently unused) */ + /* + * Verdin GPIO_9_DSI + * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused) + */ interrupt-parent = <&gpio3>; interrupts = <15 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -661,7 +668,7 @@ #pwm-cells = <3>; }; -/* VERDIN I2S_1 */ +/* Verdin I2S_1 */ &sai2 { #sound-dai-cells = <0>; assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; @@ -695,8 +702,8 @@ uart-has-rtscts; }; -/* Verdin UART_4 */ /* + * Verdin UART_4 * Resource allocated to M4 by default, must not be accessed from Cortex-A35 or you get an OOPS */ &uart4 { @@ -750,10 +757,11 @@ bus-width = <4>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; disable-wp; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>; vmmc-supply = <®_usdhc2_vmmc>; }; @@ -774,235 +782,235 @@ pinctrl_can1_int: can1intgrp { fsl,pins = - ; /* CAN_1_SPI_INT#_1.8V */ + ; /* CAN_1_SPI_INT#_1.8V */ }; pinctrl_can2_int: can2intgrp { fsl,pins = - ; /* CAN_2_SPI_INT#_1.8V */ + ; /* CAN_2_SPI_INT#_1.8V, unused */ }; pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp { fsl,pins = - ; /* SODIMM 256 */ + ; /* SODIMM 256 */ }; pinctrl_ecspi2: ecspi2grp { fsl,pins = - , /* SODIMM 196 */ - , /* SODIMM 200 */ - , /* SODIMM 198 */ - ; /* SODIMM 202 */ + , /* SODIMM 198 */ + , /* SODIMM 200 */ + , /* SODIMM 196 */ + ; /* SODIMM 202 */ }; pinctrl_ecspi3: ecspi3grp { fsl,pins = - , /* CAN_SPI_SCK_1.8V */ - , /* CAN_SPI_MOSI_1.8V */ - , /* CAN_SPI_MISO_1.8V */ - , /* CAN_1_SPI_CS_1.8V# */ - ; /* CAN_2_SPI_CS#_1.8V */ + , /* CAN_2_SPI_CS#_1.8V */ + , /* CAN_SPI_SCK_1.8V */ + , /* CAN_SPI_MOSI_1.8V */ + , /* CAN_SPI_MISO_1.8V */ + ; /* CAN_1_SPI_CS_1.8V# */ }; pinctrl_fec1: fec1grp { fsl,pins = , , - , - , - , - , - , - , - , , - , + , + , + , , , + , + , + , + , + , , - ; + ; }; pinctrl_fec1_sleep: fec1-sleepgrp { fsl,pins = , , - , - , - , - , - , - , - , , - , + , + , + , , , + , + , + , + , + , , - ; + ; }; pinctrl_flexspi0: flexspi0grp { fsl,pins = - , /* SODIMM 52 */ - , /* SODIMM 54 */ - , /* SODIMM 64 */ - , /* SODIMM 66 */ - , /* SODIMM 56 */ - , /* SODIMM 58 */ - , /* SODIMM 60 */ - ; /* SODIMM 62 */ + , /* SODIMM 52 */ + , /* SODIMM 54 */ + , /* SODIMM 64 */ + , /* SODIMM 56 */ + , /* SODIMM 58 */ + , /* SODIMM 60 */ + , /* SODIMM 62 */ + ; /* SODIMM 66 */ }; pinctrl_gpio1: gpio1grp { fsl,pins = - ; /* SODIMM 206 */ + ; /* SODIMM 206 */ }; pinctrl_gpio2: gpio2grp { fsl,pins = - ; /* SODIMM 208 */ + ; /* SODIMM 208 */ }; pinctrl_gpio3: gpio3grp { fsl,pins = - ; /* SODIMM 210 */ + ; /* SODIMM 210 */ }; pinctrl_gpio4: gpio4grp { fsl,pins = - ; /* SODIMM 212 */ + ; /* SODIMM 212 */ }; pinctrl_gpio5: gpio5grp { fsl,pins = - ; /* SODIMM 216 */ + ; /* SODIMM 216 */ }; pinctrl_gpio6: gpio6grp { fsl,pins = - ; /* SODIMM 218 */ + ; /* SODIMM 218 */ }; pinctrl_gpio7: gpio7grp { fsl,pins = - ; /* SODIMM 220 */ + ; /* SODIMM 220 */ }; pinctrl_gpio8: gpio8grp { fsl,pins = - ; /* SODIMM 222 */ + ; /* SODIMM 222 */ }; /* Verdin GPIO_9_DSI (pulled-up as active-low) */ pinctrl_gpio_9_dsi: gpio9dsigrp { fsl,pins = - ; /* SODIMM 17 */ + ; /* SODIMM 17 */ }; - /* Verdin GPIO_10_DSI */ + /* Verdin GPIO_10_DSI (pulled-up as active-low) */ pinctrl_gpio_10_dsi: gpio10dsigrp { fsl,pins = - ; /* SODIMM 21 */ + ; /* SODIMM 21 */ }; pinctrl_gpio_hog1: gpiohog1grp { fsl,pins = - , /* SODIMM 88 */ - , /* SODIMM 90 */ - , /* SODIMM 92 */ - , /* SODIMM 94 */ - , /* SODIMM 96 */ - , /* SODIMM 100 */ - , /* SODIMM 102 */ - , /* SODIMM 104 */ - , /* SODIMM 106 */ - , /* SODIMM 108 */ - , /* SODIMM 112 */ - , /* SODIMM 114 */ - , /* SODIMM 116 */ - , /* SODIMM 118 */ - ; /* SODIMM 120 */ + , /* SODIMM 88 */ + , /* SODIMM 90 */ + , /* SODIMM 92 */ + , /* SODIMM 94 */ + , /* SODIMM 96 */ + , /* SODIMM 100 */ + , /* SODIMM 102 */ + , /* SODIMM 104 */ + , /* SODIMM 106 */ + , /* SODIMM 108 */ + , /* SODIMM 112 */ + , /* SODIMM 114 */ + , /* SODIMM 116 */ + , /* SODIMM 118 */ + ; /* SODIMM 120 */ }; pinctrl_gpio_hog2: gpiohog2grp { fsl,pins = - ; /* SODIMM 91 */ + ; /* SODIMM 91 */ }; pinctrl_gpio_hog3: gpiohog3grp { fsl,pins = - , /* SODIMM 157 */ - ; /* SODIMM 187 */ + , /* SODIMM 157 */ + ; /* SODIMM 187 */ }; pinctrl_gpio_keys: gpiokeysgrp { fsl,pins = - ; /* SODIMM 252 */ + ; /* SODIMM 252 */ }; /* On-module I2C */ pinctrl_i2c1: i2c1grp { fsl,pins = - , /* PMIC_I2C_SCL */ - ; /* PMIC_I2C_SDA */ + , /* PMIC_I2C_SCL */ + ; /* PMIC_I2C_SDA */ }; pinctrl_i2c1_gpio: i2c1gpiogrp { fsl,pins = - , /* PMIC_I2C_SCL */ - ; /* PMIC_I2C_SDA */ + , /* PMIC_I2C_SCL */ + ; /* PMIC_I2C_SDA */ }; /* Verdin I2C_4_CSI */ pinctrl_i2c2: i2c2grp { fsl,pins = - , /* SODIMM 55 */ - ; /* SODIMM 53 */ + , /* SODIMM 55 */ + ; /* SODIMM 53 */ }; pinctrl_i2c2_gpio: i2c2gpiogrp { fsl,pins = - , /* SODIMM 55 */ - ; /* SODIMM 53 */ + , /* SODIMM 55 */ + ; /* SODIMM 53 */ }; /* Verdin I2C_2_DSI */ pinctrl_i2c3: i2c3grp { fsl,pins = - , /* SODIMM 95 */ - ; /* SODIMM 93 */ + , /* SODIMM 95 */ + ; /* SODIMM 93 */ }; pinctrl_i2c3_gpio: i2c3gpiogrp { fsl,pins = - , /* SODIMM 95 */ - ; /* SODIMM 93 */ + , /* SODIMM 95 */ + ; /* SODIMM 93 */ }; /* Verdin I2C_1 */ pinctrl_i2c4: i2c4grp { fsl,pins = - , /* SODIMM 14 */ - ; /* SODIMM 12 */ + , /* SODIMM 14 */ + ; /* SODIMM 12 */ }; pinctrl_i2c4_gpio: i2c4gpiogrp { fsl,pins = - , /* SODIMM 14 */ - ; /* SODIMM 12 */ + , /* SODIMM 14 */ + ; /* SODIMM 12 */ }; /* Verdin I2S_2_BCLK (TOUCH_RESET#) */ pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp { fsl,pins = - ; /* SODIMM 42 */ + ; /* SODIMM 42 */ }; /* Verdin I2S_2_D_OUT shared with SAI5 */ pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp { fsl,pins = - ; /* SODIMM 46 */ + ; /* SODIMM 46 */ }; pinctrl_pcie0: pcie0grp { @@ -1014,7 +1022,7 @@ pinctrl_pmic: pmicirqgrp { fsl,pins = - ; /* PMIC_INT# */ + ; /* PMIC_INT# */ }; /* Verdin PWM_3_DSI shared with GPIO1_IO1 */ @@ -1036,82 +1044,82 @@ /* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM1_OUT */ pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsihpdgpiogrp { fsl,pins = - ; /* SODIMM 19 */ + ; /* SODIMM 19 */ }; pinctrl_reg_eth: regethgrp { fsl,pins = - ; /* PMIC_EN_ETH */ + ; /* PMIC_EN_ETH */ }; pinctrl_reg_usb1_en: regusb1engrp { fsl,pins = - ; /* SODIMM 155 */ + ; /* SODIMM 155 */ }; pinctrl_reg_usb2_en: regusb2engrp { fsl,pins = - ; /* SODIMM 185 */ + ; /* SODIMM 185 */ }; pinctrl_sai2: sai2grp { fsl,pins = - , /* SODIMM 32 */ - , /* SODIMM 30 */ - , /* SODIMM 38 */ - , /* SODIMM 36 */ - ; /* SODIMM 34 */ + , /* SODIMM 38 */ + , /* SODIMM 30 */ + , /* SODIMM 32 */ + , /* SODIMM 36 */ + ; /* SODIMM 34 */ }; pinctrl_sai5: sai5grp { fsl,pins = - , /* SODIMM 48 */ - , /* SODIMM 44 */ - , /* SODIMM 42 */ - ; /* SODIMM 46 */ + , /* SODIMM 48 */ + , /* SODIMM 44 */ + , /* SODIMM 42 */ + ; /* SODIMM 46 */ }; /* control signal for optional ATTPM20P or SE050 */ pinctrl_pmic_tpm_ena: pmictpmenagrp { fsl,pins = - ; /* PMIC_TPM_ENA */ + ; /* PMIC_TPM_ENA */ }; pinctrl_tsp: tspgrp { fsl,pins = - , /* SODIMM 148 */ - , /* SODIMM 152 */ - , /* SODIMM 154 */ - , /* SODIMM 174 */ - ; /* SODIMM 150 */ + , /* SODIMM 148 */ + , /* SODIMM 152 */ + , /* SODIMM 154 */ + , /* SODIMM 174 */ + ; /* SODIMM 150 */ }; pinctrl_uart1: uart1grp { fsl,pins = - , /* SODIMM 149 */ - ; /* SODIMM 147 */ + , /* SODIMM 147 */ + ; /* SODIMM 149 */ }; pinctrl_uart2: uart2grp { fsl,pins = - , /* SODIMM 129 */ - , /* SODIMM 131 */ - , /* SODIMM 133 */ - ; /* SODIMM 135 */ + , /* SODIMM 133 */ + , /* SODIMM 135 */ + , /* SODIMM 131 */ + ; /* SODIMM 129 */ }; pinctrl_uart3: uart3grp { fsl,pins = - , /* SODIMM 137 */ - , /* SODIMM 139 */ - , /* SODIMM 141 */ - ; /* SODIMM 143 */ + , /* SODIMM 141 */ + , /* SODIMM 139 */ + , /* SODIMM 137 */ + ; /* SODIMM 143 */ }; pinctrl_uart4: uart4grp { fsl,pins = - , /* SODIMM 151 */ - ; /* SODIMM 153 */ + , /* SODIMM 151 */ + ; /* SODIMM 153 */ }; pinctrl_usdhc1: usdhc1grp { @@ -1164,101 +1172,124 @@ pinctrl_usdhc2_cd: usdhc2cdgrp { fsl,pins = - ; /* SODIMM 84 */ + ; /* SODIMM 84 */ + }; + + pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp { + fsl,pins = + ; /* SODIMM 84 */ }; pinctrl_usdhc2_pwr_en: usdhc2pwrengrp { fsl,pins = - ; /* SODIMM 76 */ + ; /* SODIMM 76 */ }; + /* + * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the + * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here. + */ pinctrl_usdhc2: usdhc2grp { fsl,pins = - , /* SODIMM 78 */ - , /* SODIMM 74 */ - , /* SODIMM 80 */ - , /* SODIMM 82 */ - , /* SODIMM 70 */ - , /* SODIMM 72 */ - ; + , + , /* SODIMM 78 */ + , /* SODIMM 74 */ + , /* SODIMM 80 */ + , /* SODIMM 82 */ + , /* SODIMM 70 */ + ; /* SODIMM 72 */ }; pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = - , - , - , - , - , - , - ; + , + , + , + , + , + , + ; }; pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = - , - , - , - , - , - , - ; + , + , + , + , + , + , + ; + }; + + /* Avoid backfeeding with removed card power */ + pinctrl_usdhc2_sleep: usdhc2slpgrp { + fsl,pins = + , + , + , + , + , + , + ; }; - /* On-module Wi-Fi/BT or type specific SDHC interface */ - /* (e.g. on X52 extension slot of Verdin Development Board) */ + /* + * On-module Wi-Fi/BT or type specific SDHC interface + * (e.g. on X52 extension slot of Verdin Development Board) + */ pinctrl_usdhc3: usdhc3grp { fsl,pins = - , - , - , - , - , - ; + , + , + , + , + , + ; }; pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = - , - , - , - , - , - ; + , + , + , + , + , + ; }; pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = - , - , - , - , - , - ; + , + , + , + , + , + ; }; pinctrl_wdog: wdoggrp { fsl,pins = - ; /* PMIC_WDI */ + ; /* PMIC_WDI */ }; pinctrl_wifi_ctrl: wifictrlgrp { fsl,pins = - , /* WIFI_WKUP_BT */ - , /* WIFI_W_WKUP_HOST */ - ; /* WIFI_WKUP_WLAN */ + , /* WIFI_WKUP_BT */ + , /* WIFI_W_WKUP_HOST */ + ; /* WIFI_WKUP_WLAN */ }; pinctrl_wifi_i2s: bti2sgrp { fsl,pins = - , /* WIFI_TX_BCLK */ - , /* WIFI_TX_DATA0 */ - , /* WIFI_TX_SYNC */ - ; /* WIFI_RX_DATA0 */ + , /* WIFI_TX_BCLK */ + , /* WIFI_TX_DATA0 */ + , /* WIFI_TX_SYNC */ + ; /* WIFI_RX_DATA0 */ }; pinctrl_wifi_pwr_en: wifipwrengrp { fsl,pins = - ; /* PMIC_EN_WIFI */ + ; /* PMIC_EN_WIFI */ }; }; diff --git a/dts/src/arm64/freescale/imx8mm.dtsi b/dts/src/arm64/freescale/imx8mm.dtsi index 1ee05677c2..1bf0704738 100644 --- a/dts/src/arm64/freescale/imx8mm.dtsi +++ b/dts/src/arm64/freescale/imx8mm.dtsi @@ -758,7 +758,7 @@ clocks = <&clk IMX8MM_CLK_PWM1_ROOT>, <&clk IMX8MM_CLK_PWM1_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -769,7 +769,7 @@ clocks = <&clk IMX8MM_CLK_PWM2_ROOT>, <&clk IMX8MM_CLK_PWM2_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -780,7 +780,7 @@ clocks = <&clk IMX8MM_CLK_PWM3_ROOT>, <&clk IMX8MM_CLK_PWM3_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -791,7 +791,7 @@ clocks = <&clk IMX8MM_CLK_PWM4_ROOT>, <&clk IMX8MM_CLK_PWM4_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; diff --git a/dts/src/arm64/freescale/imx8mn-beacon-baseboard.dtsi b/dts/src/arm64/freescale/imx8mn-beacon-baseboard.dtsi index 0f40b43ac0..02f37dcda7 100644 --- a/dts/src/arm64/freescale/imx8mn-beacon-baseboard.dtsi +++ b/dts/src/arm64/freescale/imx8mn-beacon-baseboard.dtsi @@ -175,6 +175,7 @@ pinctrl-0 = <&pinctrl_uart3>; assigned-clocks = <&clk IMX8MN_CLK_UART3>; assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>; + uart-has-rtscts; status = "okay"; }; @@ -258,6 +259,8 @@ fsl,pins = < MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40 MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40 + MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x40 + MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x40 >; }; diff --git a/dts/src/arm64/freescale/imx8mn-bsh-smm-s2pro.dts b/dts/src/arm64/freescale/imx8mn-bsh-smm-s2pro.dts index c6a8ed6745..fbbb336703 100644 --- a/dts/src/arm64/freescale/imx8mn-bsh-smm-s2pro.dts +++ b/dts/src/arm64/freescale/imx8mn-bsh-smm-s2pro.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "imx8mn-bsh-smm-s2-common.dtsi" +#include / { model = "BSH SMM S2 PRO"; @@ -16,6 +17,65 @@ device_type = "memory"; reg = <0x0 0x40000000 0x0 0x20000000>; }; + + sound-tlv320aic31xx { + compatible = "fsl,imx-audio-tlv320aic31xx"; + model = "tlv320aic31xx-hifi"; + audio-cpu = <&sai3>; + audio-codec = <&tlv320dac3101>; + audio-asrc = <&easrc>; + audio-routing = + "Ext Spk", "SPL", + "Ext Spk", "SPR"; + mclk-id = ; + }; + + vdd_input: vdd_input { + compatible = "regulator-fixed"; + regulator-name = "vdd_input"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&easrc { + fsl,asrc-rate = <48000>; + fsl,asrc-format = <10>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + tlv320dac3101: audio-codec@18 { + compatible = "ti,tlv320dac3101"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dac_rst>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <&buck4_reg>; + SPRVDD-supply = <&vdd_input>; + SPLVDD-supply = <&vdd_input>; + AVDD-supply = <&buck4_reg>; + IOVDD-supply = <&buck4_reg>; + DVDD-supply = <&buck5_reg>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + ai31xx-micbias-vg = ; + clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MN_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + fsl,sai-mclk-direction-output; + status = "okay"; }; /* eMMC */ @@ -30,6 +90,36 @@ }; &iomuxc { + pinctrl_dac_rst: dacrstgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 /* DAC_RST */ + >; + }; + + pinctrl_espi2: espi2grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x082 + MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x082 + MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x082 + MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x040 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400000c3 + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000c3 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000090 diff --git a/dts/src/arm64/freescale/imx8mn-ddr3l-evk.dts b/dts/src/arm64/freescale/imx8mn-ddr3l-evk.dts new file mode 100644 index 0000000000..000e2c0596 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mn-ddr3l-evk.dts @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "imx8mn.dtsi" +#include "imx8mn-evk.dtsi" +#include + +/ { + model = "NXP i.MX8MNano DDR3L EVK board"; + compatible = "fsl,imx8mn-ddr3l-evk", "fsl,imx8mn"; +}; + +&A53_0 { + cpu-supply = <&buck1>; +}; + +&A53_1 { + cpu-supply = <&buck1>; +}; + +&A53_2 { + cpu-supply = <&buck1>; +}; + +&A53_3 { + cpu-supply = <&buck1>; +}; + +&i2c1 { + pmic: pmic@25 { + compatible = "nxp,pca9450b"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1: BUCK1 { + regulator-name = "VDD_SOC_0V9"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "NVCC_DRAM_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "NVCC_SNVS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "VDD_SNVS_0V8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "VDD_PHY_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "NVCC_SD2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mn-evk.dts b/dts/src/arm64/freescale/imx8mn-evk.dts index b4225cfcb6..4eb467df5b 100644 --- a/dts/src/arm64/freescale/imx8mn-evk.dts +++ b/dts/src/arm64/freescale/imx8mn-evk.dts @@ -41,18 +41,18 @@ regulators { buck1: BUCK1{ - regulator-name = "BUCK1"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; }; buck2: BUCK2 { - regulator-name = "BUCK2"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + regulator-name = "VDD_ARM_0V9"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; @@ -61,63 +61,63 @@ }; buck4: BUCK4{ - regulator-name = "BUCK4"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; buck5: BUCK5{ - regulator-name = "BUCK5"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; buck6: BUCK6 { - regulator-name = "BUCK6"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "NVCC_DRAM_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; }; ldo1: LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <3300000>; + regulator-name = "NVCC_SNVS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; ldo2: LDO2 { - regulator-name = "LDO2"; + regulator-name = "VDD_SNVS_0V8"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <800000>; regulator-boot-on; regulator-always-on; }; ldo3: LDO3 { - regulator-name = "LDO3"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; ldo4: LDO4 { - regulator-name = "LDO4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDD_PHY_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-boot-on; regulator-always-on; }; ldo5: LDO5 { - regulator-name = "LDO5"; + regulator-name = "NVCC_SD2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; diff --git a/dts/src/arm64/freescale/imx8mn-evk.dtsi b/dts/src/arm64/freescale/imx8mn-evk.dtsi index c3f15192b7..d1f6cccfa0 100644 --- a/dts/src/arm64/freescale/imx8mn-evk.dtsi +++ b/dts/src/arm64/freescale/imx8mn-evk.dtsi @@ -110,6 +110,22 @@ }; }; +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <166000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -196,6 +212,15 @@ status = "okay"; }; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clk IMX8MN_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>; + uart-has-rtscts; + status = "okay"; +}; + &usbotg1 { dr_mode = "otg"; hnp-disable; @@ -267,6 +292,17 @@ >; }; + pinctrl_flexspi: flexspigrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; + pinctrl_gpio_led: gpioledgrp { fsl,pins = < MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 @@ -347,6 +383,15 @@ >; }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x140 + MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x140 + MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x140 + MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x140 + >; + }; + pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 diff --git a/dts/src/arm64/freescale/imx8mn-venice-gw7902.dts b/dts/src/arm64/freescale/imx8mn-venice-gw7902.dts index 3c0e63d2e8..367a232675 100644 --- a/dts/src/arm64/freescale/imx8mn-venice-gw7902.dts +++ b/dts/src/arm64/freescale/imx8mn-venice-gw7902.dts @@ -393,6 +393,13 @@ gw,voltage-divider-ohms = <10000 10000>; }; + channel@9c { + gw,mode = <2>; + reg = <0x9c>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + channel@a2 { gw,mode = <2>; reg = <0xa2>; @@ -625,6 +632,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; bluetooth { diff --git a/dts/src/arm64/freescale/imx8mn.dtsi b/dts/src/arm64/freescale/imx8mn.dtsi index 5c0ca24905..e41e1d56f9 100644 --- a/dts/src/arm64/freescale/imx8mn.dtsi +++ b/dts/src/arm64/freescale/imx8mn.dtsi @@ -705,7 +705,7 @@ clocks = <&clk IMX8MN_CLK_PWM1_ROOT>, <&clk IMX8MN_CLK_PWM1_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -716,7 +716,7 @@ clocks = <&clk IMX8MN_CLK_PWM2_ROOT>, <&clk IMX8MN_CLK_PWM2_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -727,7 +727,7 @@ clocks = <&clk IMX8MN_CLK_PWM3_ROOT>, <&clk IMX8MN_CLK_PWM3_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -738,7 +738,7 @@ clocks = <&clk IMX8MN_CLK_PWM4_ROOT>, <&clk IMX8MN_CLK_PWM4_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -933,7 +933,7 @@ }; usdhc1: mmc@30b40000 { - compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; interrupts = ; clocks = <&clk IMX8MN_CLK_IPG_ROOT>, @@ -947,7 +947,7 @@ }; usdhc2: mmc@30b50000 { - compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b50000 0x10000>; interrupts = ; clocks = <&clk IMX8MN_CLK_IPG_ROOT>, @@ -961,7 +961,7 @@ }; usdhc3: mmc@30b60000 { - compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b60000 0x10000>; interrupts = ; clocks = <&clk IMX8MN_CLK_IPG_ROOT>, diff --git a/dts/src/arm64/freescale/imx8mp-icore-mx8mp-edimm2.2.dts b/dts/src/arm64/freescale/imx8mp-icore-mx8mp-edimm2.2.dts new file mode 100644 index 0000000000..70a701a624 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-icore-mx8mp-edimm2.2.dts @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/dts-v1/; + +#include "imx8mp.dtsi" +#include "imx8mp-icore-mx8mp.dtsi" +#include + +/ { + model = "Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit"; + compatible = "engicam,icore-mx8mp-edimm2.2", "engicam,icore-mx8mp", + "fsl,imx8mp"; + + chosen { + stdout-path = &uart2; + }; + + reg_usb1_vbus: regulator-usb1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb1_host_vbus"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VSD_3V3"; + }; +}; + +/* Ethernet */ +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + micrel,led-mode = <0>; + reg = <7>; + }; + }; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +/* SDCARD */ +&usdhc2 { + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + pinctrl-names = "default" ; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x19 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 + MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS 0x140 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + >; + }; + + pinctrl_reg_usb1: regusb1grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x19 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mp-icore-mx8mp.dtsi b/dts/src/arm64/freescale/imx8mp-icore-mx8mp.dtsi new file mode 100644 index 0000000000..5116079cce --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-icore-mx8mp.dtsi @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/ { + compatible = "engicam,icore-mx8mp", "fsl,imx8mp"; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450c"; + interrupt-parent = <&gpio3>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x25>; + + regulators { + buck1: BUCK1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1000000>; + regulator-name = "BUCK1"; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1025000>; + regulator-min-microvolt = <720000>; + regulator-name = "BUCK2"; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3600000>; + regulator-min-microvolt = <3000000>; + regulator-name = "BUCK4"; + }; + + buck5: BUCK5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1950000>; + regulator-min-microvolt = <1650000>; + regulator-name = "BUCK5"; + }; + + buck6: BUCK6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1155000>; + regulator-min-microvolt = <1045000>; + regulator-name = "BUCK6"; + }; + + ldo1: LDO1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1950000>; + regulator-min-microvolt = <1650000>; + regulator-name = "LDO1"; + }; + + ldo3: LDO3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1890000>; + regulator-min-microvolt = <1710000>; + regulator-name = "LDO3"; + }; + + ldo5: LDO5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "LDO5"; + }; + }; + }; +}; + +/* EMMC */ +&usdhc3 { + bus-width = <8>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x41 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mp-venice-gw74xx.dts b/dts/src/arm64/freescale/imx8mp-venice-gw74xx.dts new file mode 100644 index 0000000000..101d311476 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-venice-gw74xx.dts @@ -0,0 +1,896 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 Gateworks Corporation + */ + +/dts-v1/; + +#include +#include +#include + +#include "imx8mp.dtsi" + +/ { + model = "Gateworks Venice GW74xx i.MX8MP board"; + compatible = "gateworks,imx8mp-gw74xx", "fsl,imx8mp"; + + aliases { + ethernet0 = &eqos; + ethernet1 = &fec; + ethernet2 = &lan1; + ethernet3 = &lan2; + ethernet4 = &lan3; + ethernet5 = &lan4; + ethernet6 = &lan5; + }; + + chosen { + stdout-path = &uart2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-0 { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-1 { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-2 { + label = "key_erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + key-3 { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + key-4 { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + key-5 { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_HEARTBEAT; + color = ; + gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + + reg_usb2_vbus: regulator-usb2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2>; + compatible = "regulator-fixed"; + regulator-name = "usb_usb2_vbus"; + gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_can>; + regulator-name = "can2_stby"; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_wifi_en: regulator-wifi-en { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wifi>; + compatible = "regulator-fixed"; + regulator-name = "wl"; + gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + +&gpio1 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "dio0", "", "dio1", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "pcie3_wdis#", "", "", "pcie1_wdis@", "pcie2_wdis#", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "m2_gdis#", "", "", "", "", "", "", "m2_rst#", + "", "", "", "", "", "", "", "", + "m2_off#", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "m2_wdis#", "", "", "", + "", "", "", "", "", "", "", "uart_rs485"; +}; + +&gpio5 { + gpio-line-names = + "uart_half", "uart_term", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio4>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_adc1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_adc2"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_soc"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_arm"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_1p8"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_1p2"; + }; + + channel@9c { + gw,mode = <2>; + reg = <0x9c>; + label = "vdd_dram"; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + regulators { + BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1025000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + regulator-always-on; + }; + + BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + }; + + BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1045000>; + regulator-max-microvolt = <1155000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + accelerometer@19 { + compatible = "st,lis2de12"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; + + switch: switch@5f { + compatible = "microchip,ksz9897"; + reg = <0x5f>; + pinctrl-0 = <&pinctrl_ksz>; + interrupt-parent = <&gpio4>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + lan1: port@0 { + reg = <0>; + label = "lan1"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan2: port@1 { + reg = <1>; + label = "lan2"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan3: port@2 { + reg = <2>; + label = "lan3"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan4: port@3 { + reg = <3>; + label = "lan4"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan5: port@4 { + reg = <4>; + label = "lan5"; + local-mac-address = [00 00 00 00 00 00]; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&fec>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* off-board header */ +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +/* GPS / off-board header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* RS232 console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +/* USB1 - Type C front panel */ +&usb3_phy0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + status = "okay"; +}; + +&usb3_0 { + fsl,over-current-active-low; + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +/* USB2 - USB3.0 Hub */ +&usb3_phy1 { + vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; + +&usb3_1 { + fsl,permanently-attached; + fsl,disable-port-power-control; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000041 /* DIO0 */ + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000041 /* DIO1 */ + MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000041 /* M2SKT_OFF# */ + MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x40000159 /* PCIE1_WDIS# */ + MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000159 /* PCIE2_WDIS# */ + MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000159 /* PCIE3_WDIS# */ + MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000041 /* M2SKT_RST# */ + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000159 /* M2SKT_WDIS# */ + MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000159 /* M2SKT_GDIS# */ + MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */ + MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */ + MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x159 + >; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x141 /* RST# */ + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x159 /* IRQ# */ + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x141 + MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x141 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x159 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_ksz: kszgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x159 /* IRQ# */ + MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x141 /* RST# */ + >; + }; + + pinctrl_gpio_leds: ledgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x19 + MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x19 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x141 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x141 + >; + }; + + pinctrl_reg_can: regcangrp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x154 + >; + }; + + pinctrl_reg_usb2: regusb2grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x141 + >; + }; + + pinctrl_reg_wifi: regwifigrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x119 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK + MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 + MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x140 + MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x140 + >; + }; + + pinctrl_uart3_gpio: uart3gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x119 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140 + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140 + >; + }; + + pinctrl_usb1: usb1grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x140 + MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi b/dts/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi new file mode 100644 index 0000000000..4b8f86f630 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/* TODO: Audio Codec */ + +&backlight { + power-supply = <®_3p3v>; +}; + +/* Verdin SPI_1 */ +&ecspi1 { + status = "okay"; +}; + +/* EEPROM on display adapter boards */ +&eeprom_display_adapter { + status = "okay"; +}; + +/* EEPROM on Verdin Development board */ +&eeprom_carrier_board { + status = "okay"; +}; + +&eqos { + status = "okay"; +}; + +&flexcan1 { + status = "okay"; +}; + +&flexcan2 { + status = "okay"; +}; + +/* Verdin QSPI_1 */ +&flexspi { + status = "okay"; +}; + +/* Current measurement into module VCC */ +&hwmon { + status = "okay"; +}; + +&hwmon_temp { + vs-supply = <®_1p8v>; + status = "okay"; +}; + +/* Verdin I2C_2_DSI */ +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + status = "okay"; + + /* TODO: Audio Codec */ +}; + +/* TODO: Verdin PCIE_1 */ + +/* Verdin PWM_1 */ +&pwm1 { + status = "okay"; +}; + +/* Verdin PWM_2 */ +&pwm2 { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&pwm3 { + status = "okay"; +}; + +®_usdhc2_vmmc { + vin-supply = <®_3p3v>; +}; + +/* TODO: Verdin I2S_1 */ + +/* Verdin UART_1 */ +&uart1 { + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart2 { + status = "okay"; +}; + +/* Verdin UART_3, used as the Linux Console */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usb3_0 { + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usb3_1 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/imx8mp-verdin-dev.dtsi b/dts/src/arm64/freescale/imx8mp-verdin-dev.dtsi new file mode 100644 index 0000000000..cefabe65b2 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-verdin-dev.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include "imx8mp-verdin-dahlia.dtsi" + +/ { + /* TODO: Audio Codec */ + + reg_eth2phy: regulator-eth2phy { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */ + off-on-delay = <500000>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_ETH"; + startup-delay-us = <200000>; + vin-supply = <®_3p3v>; + }; +}; + +&fec { + phy-supply = <®_eth2phy>; + status = "okay"; +}; + +&gpio_expander_21 { + status = "okay"; + vcc-supply = <®_1p8v>; +}; + +/* TODO: Verdin I2C_1 with Audio Codec */ + +/* Verdin UART_1, connector X50 through RS485 transceiver */ +&uart1 { + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; +}; + +/* Limit frequency on dev board due to long traces and bad signal integrity */ +&usdhc2 { + max-frequency = <100000000>; +}; diff --git a/dts/src/arm64/freescale/imx8mp-verdin-nonwifi-dahlia.dts b/dts/src/arm64/freescale/imx8mp-verdin-nonwifi-dahlia.dts new file mode 100644 index 0000000000..68147b0c1b --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-verdin-nonwifi-dahlia.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-nonwifi.dtsi" +#include "imx8mp-verdin-dahlia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus on Dahlia Board"; + compatible = "toradex,verdin-imx8mp-nonwifi-dahlia", + "toradex,verdin-imx8mp-nonwifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/dts/src/arm64/freescale/imx8mp-verdin-nonwifi-dev.dts b/dts/src/arm64/freescale/imx8mp-verdin-nonwifi-dev.dts new file mode 100644 index 0000000000..879ff687cf --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-verdin-nonwifi-dev.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-nonwifi.dtsi" +#include "imx8mp-verdin-dev.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus on Verdin Development Board"; + compatible = "toradex,verdin-imx8mp-nonwifi-dev", + "toradex,verdin-imx8mp-nonwifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/dts/src/arm64/freescale/imx8mp-verdin-nonwifi.dtsi b/dts/src/arm64/freescale/imx8mp-verdin-nonwifi.dtsi new file mode 100644 index 0000000000..91d597391b --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-verdin-nonwifi.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +&gpio5 { + gpio-line-names = "SODIMM_42", + "SODIMM_46", + "SODIMM_187", + "SODIMM_20", + "SODIMM_22", + "SODIMM_15", + "SODIMM_196", + "SODIMM_200", + "SODIMM_198", + "SODIMM_202", + "SODIMM_164", + "SODIMM_152", + "SODIMM_116", + "SODIMM_128", + "", + "", + "SODIMM_55", + "SODIMM_53", + "SODIMM_95", + "SODIMM_93", + "SODIMM_14", + "SODIMM_12", + "SODIMM_129", + "SODIMM_131", + "SODIMM_137", + "SODIMM_139", + "SODIMM_147", + "SODIMM_149", + "SODIMM_151", + "SODIMM_153"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>, + <&pinctrl_gpio3>, <&pinctrl_gpio4>, + <&pinctrl_gpio7>, <&pinctrl_gpio8>, + <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, + <&pinctrl_hdmi_hog>; +}; + +/* + * Verdin UART_4 + * Often used by the M7 and then should not be enabled here. + */ +&uart4 { + status = "disabled"; +}; diff --git a/dts/src/arm64/freescale/imx8mp-verdin-wifi-dahlia.dts b/dts/src/arm64/freescale/imx8mp-verdin-wifi-dahlia.dts new file mode 100644 index 0000000000..804567f6cc --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-verdin-wifi-dahlia.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-wifi.dtsi" +#include "imx8mp-verdin-dahlia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus WB on Dahlia Board"; + compatible = "toradex,verdin-imx8mp-wifi-dahlia", + "toradex,verdin-imx8mp-wifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/dts/src/arm64/freescale/imx8mp-verdin-wifi-dev.dts b/dts/src/arm64/freescale/imx8mp-verdin-wifi-dev.dts new file mode 100644 index 0000000000..c1713c28cd --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-verdin-wifi-dev.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-wifi.dtsi" +#include "imx8mp-verdin-dev.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus WB on Verdin Development Board"; + compatible = "toradex,verdin-imx8mp-wifi-dev", + "toradex,verdin-imx8mp-wifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/dts/src/arm64/freescale/imx8mp-verdin-wifi.dtsi b/dts/src/arm64/freescale/imx8mp-verdin-wifi.dtsi new file mode 100644 index 0000000000..36289c175e --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-verdin-wifi.dtsi @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/ { + reg_wifi_en: regulator-wifi-en { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pwr_en>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "PDn_AW-CM276NF"; + startup-delay-us = <2000>; + }; +}; + +&gpio5 { + gpio-line-names = "SODIMM_42", + "SODIMM_46", + "SODIMM_187", + "SODIMM_20", + "SODIMM_22", + "SODIMM_15", + "SODIMM_196", + "SODIMM_200", + "SODIMM_198", + "SODIMM_202", + "", + "", + "", + "", + "", + "", + "SODIMM_55", + "SODIMM_53", + "SODIMM_95", + "SODIMM_93", + "SODIMM_14", + "SODIMM_12", + "SODIMM_129", + "SODIMM_131", + "SODIMM_137", + "SODIMM_139", + "SODIMM_147", + "SODIMM_149", + "SODIMM_151", + "SODIMM_153"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>, + <&pinctrl_gpio3>, <&pinctrl_gpio4>, + <&pinctrl_gpio7>, <&pinctrl_gpio8>, + <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>, + <&pinctrl_hdmi_hog>; +}; + +/* On-module Bluetooth */ +&uart4 { + uart-has-rtscts; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_uart>; + status = "okay"; +}; + +/* On-module Wi-Fi */ +&usdhc1 { + bus-width = <4>; + keep-power-in-suspend; + max-frequency = <100000000>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wifi_ctrl>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_wifi_ctrl>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_wifi_ctrl>; + vmmc-supply = <®_wifi_en>; + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/imx8mp-verdin.dtsi b/dts/src/arm64/freescale/imx8mp-verdin.dtsi new file mode 100644 index 0000000000..fb17e329cd --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-verdin.dtsi @@ -0,0 +1,1380 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include "dt-bindings/pwm/pwm.h" +#include "imx8mp.dtsi" + +/ { + chosen { + stdout-path = &uart3; + }; + + aliases { + /* Ethernet aliases to ensure correct MAC addresses */ + ethernet0 = &eqos; + ethernet1 = &fec; + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + /* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */ + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>; + power-supply = <®_3p3v>; + /* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */ + pwms = <&pwm3 0 6666667 PWM_POLARITY_INVERTED>; + status = "disabled"; + }; + + backlight_mezzanine: backlight-mezzanine { + compatible = "pwm-backlight"; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + /* Verdin GPIO 4 (SODIMM 212) */ + enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + /* Verdin PWM_2 (SODIMM 16) */ + pwms = <&pwm2 0 6666667 PWM_POLARITY_INVERTED>; + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + debounce-interval = <10>; + /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */ + gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; + label = "Wake-Up"; + linux,code = ; + wakeup-source; + }; + }; + + /* Carrier Board Supplies */ + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_SW"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SW"; + }; + + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "+V5_SW"; + }; + + /* Non PMIC On-module Supplies */ + reg_module_eth1phy: regulator-module-eth1phy { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */ + off-on-delay = <500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_eth>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "On-module +V3.3_ETH"; + startup-delay-us = <200000>; + vin-supply = <®_vdd_3v3>; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin USB_1_EN (SODIMM 155) */ + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "USB_1_EN"; + }; + + reg_usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin USB_2_EN (SODIMM 185) */ + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "USB_2_EN"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin SD_1_PWR_EN (SODIMM 76) */ + gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; + off-on-delay = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_pwr_en>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SD"; + startup-delay-us = <2000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Use the kernel configuration settings instead */ + /delete-node/ linux,cma; + }; +}; + +/* Verdin SPI_1 */ +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; +}; + +/* Verdin ETH_1 (On-module PHY) */ +&eqos { + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + phy-supply = <®_module_eth1phy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + snps,force_thresh_dma_mode; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + eee-broken-100tx; + eee-broken-1000t; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <0>; + reg = <7>; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <5>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0xf0>; + snps,map-to-dma-channel = <4>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <5>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0xf0>; + }; + }; +}; + +/* Verdin ETH_2_RGMII */ +&fec { + fsl,magic-packet; + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec>; + pinctrl-1 = <&pinctrl_fec_sleep>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <0>; + reg = <7>; + }; + }; +}; + +/* Verdin CAN_1 */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + + +/* Verdin CAN_2 */ +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +/* Verdin QSPI_1 */ +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; +}; + +&gpio1 { + gpio-line-names = "SODIMM_206", + "SODIMM_208", + "", + "", + "", + "SODIMM_210", + "SODIMM_212", + "SODIMM_216", + "SODIMM_218", + "", + "", + "SODIMM_16", + "SODIMM_155", + "SODIMM_157", + "SODIMM_185", + "SODIMM_91"; +}; + +&gpio2 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "SODIMM_143", + "SODIMM_141", + "", + "", + "SODIMM_161", + "", + "SODIMM_84", + "SODIMM_78", + "SODIMM_74", + "SODIMM_80", + "SODIMM_82", + "SODIMM_70", + "SODIMM_72"; + + ctrl-sleep-moci-hog { + gpio-hog; + /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ + gpios = <29 GPIO_ACTIVE_HIGH>; + line-name = "CTRL_SLEEP_MOCI#"; + output-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>; + }; +}; + +&gpio3 { + gpio-line-names = "SODIMM_52", + "SODIMM_54", + "", + "", + "", + "", + "SODIMM_56", + "SODIMM_58", + "SODIMM_60", + "SODIMM_62", + "", + "", + "", + "", + "SODIMM_66", + "", + "SODIMM_64", + "", + "", + "SODIMM_34", + "SODIMM_19", + "", + "SODIMM_32", + "", + "", + "SODIMM_30", + "SODIMM_59", + "SODIMM_57", + "SODIMM_63", + "SODIMM_61"; +}; + +&gpio4 { + gpio-line-names = "SODIMM_252", + "SODIMM_222", + "SODIMM_36", + "SODIMM_220", + "SODIMM_193", + "SODIMM_191", + "SODIMM_201", + "SODIMM_203", + "SODIMM_205", + "SODIMM_207", + "SODIMM_199", + "SODIMM_197", + "SODIMM_221", + "SODIMM_219", + "SODIMM_217", + "SODIMM_215", + "SODIMM_211", + "SODIMM_213", + "SODIMM_189", + "SODIMM_244", + "SODIMM_38", + "", + "SODIMM_76", + "SODIMM_135", + "SODIMM_133", + "SODIMM_17", + "SODIMM_24", + "SODIMM_26", + "SODIMM_21", + "SODIMM_256", + "SODIMM_48", + "SODIMM_44"; +}; + +/* On-module I2C */ +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450c"; + interrupt-parent = <&gpio1>; + /* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */ + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x25>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + + /* + * The bootloader is expected to switch on LDO4 for the on-module +V3.3_ADC and the + * I2C level shifter for the TLA2024 ADC behind this PMIC. + */ + + regulators { + BUCK1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <720000>; + regulator-name = "On-module +VDD_SOC (BUCK1)"; + regulator-ramp-delay = <3125>; + }; + + BUCK2 { + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1025000>; + regulator-min-microvolt = <720000>; + regulator-name = "On-module +VDD_ARM (BUCK2)"; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_3v3: BUCK4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "On-module +V3.3 (BUCK4)"; + }; + + reg_vdd_1v8: BUCK5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "PWR_1V8_MOCI (BUCK5)"; + }; + + BUCK6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1155000>; + regulator-min-microvolt = <1045000>; + regulator-name = "On-module +VDD_DDR (BUCK6)"; + }; + + LDO1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1950000>; + regulator-min-microvolt = <1650000>; + regulator-name = "On-module +V1.8_SNVS (LDO1)"; + }; + + LDO2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1150000>; + regulator-min-microvolt = <800000>; + regulator-name = "On-module +V0.8_SNVS (LDO2)"; + }; + + LDO3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V1.8A (LDO3)"; + }; + + LDO4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "On-module +V3.3_ADC (LDO4)"; + }; + + LDO5 { + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V3.3_1.8_SD (LDO5)"; + }; + }; + }; + + rtc_i2c: rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + }; + + /* On-module temperature sensor */ + hwmon_temp_module: sensor@48 { + compatible = "ti,tmp1075"; + reg = <0x48>; + vs-supply = <®_vdd_1v8>; + }; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* Verdin I2C_1 (ADC_4 - ADC_3) */ + channel@0 { + reg = <0>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 (ADC_4 - ADC_1) */ + channel@1 { + reg = <1>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 (ADC_3 - ADC_1) */ + channel@2 { + reg = <2>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 (ADC_2 - ADC_1) */ + channel@3 { + reg = <3>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_4 */ + channel@4 { + reg = <4>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_3 */ + channel@5 { + reg = <5>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_2 */ + channel@6 { + reg = <6>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_1 */ + channel@7 { + reg = <7>; + ti,datarate = <4>; + ti,gain = <2>; + }; + }; + + eeprom@50 { + compatible = "st,24c02"; + pagesize = <16>; + reg = <0x50>; + }; +}; + +/* Verdin I2C_2_DSI */ +&i2c2 { + /* Lower frequency to avoid DDC/EDID issues with certain displays/screens. */ + clock-frequency = <10000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + atmel_mxt_ts_mezzanine: touch-mezzanine@4a { + compatible = "atmel,maxtouch"; + /* Verdin GPIO_3 (SODIMM 210) */ + interrupt-parent = <&gpio1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reg = <0x4a>; + /* Verdin GPIO_2 (SODIMM 208) */ + reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; +}; + +/* TODO: Verdin I2C_3_HDMI */ + +/* Verdin I2C_4_CSI */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +/* Verdin I2C_1 */ +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + gpio_expander_21: gpio-expander@21 { + compatible = "nxp,pcal6416"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x21>; + vcc-supply = <®_3p3v>; + status = "disabled"; + }; + + lvds_ti_sn65dsi83: bridge@2c { + compatible = "ti,sn65dsi83"; + /* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */ + /* Verdin GPIO_10_DSI (SODIMM 21) */ + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_10_dsi>; + reg = <0x2c>; + status = "disabled"; + }; + + /* Current measurement into module VCC */ + hwmon: hwmon@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <10000>; + status = "disabled"; + }; + + hdmi_lontium_lt8912: hdmi@48 { + compatible = "lontium,lt8912b"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>; + reg = <0x48>; + /* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */ + /* Verdin GPIO_10_DSI (SODIMM 21) */ + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + status = "disabled"; + }; + + atmel_mxt_ts: touch@4a { + compatible = "atmel,maxtouch"; + /* + * Verdin GPIO_9_DSI + * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused) + */ + interrupt-parent = <&gpio4>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>; + reg = <0x4a>; + /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */ + reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + /* Temperature sensor on carrier board */ + hwmon_temp: sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + status = "disabled"; + }; + + /* EEPROM on display adapter (MIPI DSI Display Adapter) */ + eeprom_display_adapter: eeprom@50 { + compatible = "st,24c02"; + pagesize = <16>; + reg = <0x50>; + status = "disabled"; + }; + + /* EEPROM on carrier board */ + eeprom_carrier_board: eeprom@57 { + compatible = "st,24c02"; + pagesize = <16>; + reg = <0x57>; + status = "disabled"; + }; +}; + +/* TODO: Verdin PCIE_1 */ + +/* Verdin PWM_1 */ +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_1>; + #pwm-cells = <3>; +}; + +/* Verdin PWM_2 */ +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_2>; + #pwm-cells = <3>; +}; + +/* Verdin PWM_3_DSI */ +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_3>; + #pwm-cells = <3>; +}; + +/* TODO: Verdin I2S_1 */ + +/* TODO: Verdin I2S_2 */ + +&snvs_pwrkey { + status = "okay"; +}; + +/* Verdin UART_1 */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; +}; + +/* Verdin UART_2 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; +}; + +/* Verdin UART_3, used as the Linux Console */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; +}; + +/* Verdin UART_4, used for Bluetooth on Wi-Fi/Bluetooth SKUs */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; +}; + +/* Verdin USB_1 */ +&usb3_phy0 { + vbus-supply = <®_usb1_vbus>; +}; + +&usb_dwc3_0 { + adp-disable; + dr_mode = "otg"; + hnp-disable; + maximum-speed = "high-speed"; + over-current-active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_1_id>; + srp-disable; +}; + +/* Verdin USB_2 */ +&usb3_phy1 { + vbus-supply = <®_usb2_vbus>; +}; + +&usb_dwc3_1 { + disable-over-current; + dr_mode = "host"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; + assigned-clock-rates = <400000000>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>; + vmmc-supply = <®_usdhc2_vmmc>; +}; + +/* On-module eMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + status = "okay"; +}; + +&wdog1 { + fsl,ext-reset-output; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + status = "okay"; +}; + +&iomuxc { + pinctrl_bt_uart: btuartgrp { + fsl,pins = + , + , + , + ; + }; + + pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp { + fsl,pins = + ; /* SODIMM 256 */ + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = + , /* SODIMM 198 */ + , /* SODIMM 200 */ + , /* SODIMM 196 */ + ; /* SODIMM 202 */ + }; + + /* Connection On Board PHY */ + pinctrl_eqos: eqosgrp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + /* ETH_INT# shared with TPM_INT# (usually N/A) */ + pinctrl_eth_tpm_int: ethtpmintgrp { + fsl,pins = + ; + }; + + /* Connection Carrier Board PHY ETH_2 */ + pinctrl_fec: fecgrp { + fsl,pins = + , /* SODIMM 193 */ + , /* SODIMM 191 */ + , /* SODIMM 201 */ + , /* SODIMM 203 */ + , /* SODIMM 205 */ + , /* SODIMM 207 */ + , /* SODIMM 197 */ + , /* SODIMM 199 */ + , /* SODIMM 221 */ + , /* SODIMM 219 */ + , /* SODIMM 217 */ + , /* SODIMM 215 */ + , /* SODIMM 211 */ + , /* SODIMM 213 */ + ; /* SODIMM 189 */ + }; + + pinctrl_fec_sleep: fecsleepgrp { + fsl,pins = + , /* SODIMM 193 */ + , /* SODIMM 191 */ + , /* SODIMM 201 */ + , /* SODIMM 203 */ + , /* SODIMM 205 */ + , /* SODIMM 207 */ + , /* SODIMM 197 */ + , /* SODIMM 199 */ + , /* SODIMM 221 */ + , /* SODIMM 219 */ + , /* SODIMM 217 */ + , /* SODIMM 215 */ + , /* SODIMM 211 */ + , /* SODIMM 213 */ + ; /* SODIMM 189 */ + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = + , /* SODIMM 22 */ + ; /* SODIMM 20 */ + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = + , /* SODIMM 26 */ + ; /* SODIMM 24 */ + }; + + pinctrl_flexspi0: flexspi0grp { + fsl,pins = + , /* SODIMM 52 */ + , /* SODIMM 54 */ + , /* SODIMM 66 */ + , /* SODIMM 56 */ + , /* SODIMM 58 */ + , /* SODIMM 60 */ + , /* SODIMM 62 */ + ; /* SODIMM 64 */ + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = + ; /* SODIMM 206 */ + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = + ; /* SODIMM 208 */ + }; + + pinctrl_gpio3: gpio3grp { + fsl,pins = + ; /* SODIMM 210 */ + }; + + pinctrl_gpio4: gpio4grp { + fsl,pins = + ; /* SODIMM 212 */ + }; + + pinctrl_gpio5: gpio5grp { + fsl,pins = + ; /* SODIMM 216 */ + }; + + pinctrl_gpio6: gpio6grp { + fsl,pins = + ; /* SODIMM 218 */ + }; + + pinctrl_gpio7: gpio7grp { + fsl,pins = + ; /* SODIMM 220 */ + }; + + pinctrl_gpio8: gpio8grp { + fsl,pins = + ; /* SODIMM 222 */ + }; + + /* Verdin GPIO_9_DSI (pulled-up as active-low) */ + pinctrl_gpio_9_dsi: gpio9dsigrp { + fsl,pins = + ; /* SODIMM 17 */ + }; + + /* Verdin GPIO_10_DSI */ + pinctrl_gpio_10_dsi: gpio10dsigrp { + fsl,pins = + ; /* SODIMM 21 */ + }; + + /* Non-wifi MSP usage only */ + pinctrl_gpio_hog1: gpiohog1grp { + fsl,pins = + , /* SODIMM 116 */ + , /* SODIMM 152 */ + , /* SODIMM 164 */ + ; /* SODIMM 128 */ + }; + + /* USB_2_OC# */ + pinctrl_gpio_hog2: gpiohog2grp { + fsl,pins = + ; /* SODIMM 187 */ + }; + + pinctrl_gpio_hog3: gpiohog3grp { + fsl,pins = + , /* SODIMM 157 */ + /* CSI_1_MCLK */ + ; /* SODIMM 91 */ + }; + + /* Wifi usage only */ + pinctrl_gpio_hog4: gpiohog4grp { + fsl,pins = + , /* SODIMM 151 */ + ; /* SODIMM 153 */ + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = + ; /* SODIMM 252 */ + }; + + pinctrl_hdmi_hog: hdmihoggrp { + fsl,pins = + , /* SODIMM 63 */ + , /* SODIMM 59 */ + , /* SODIMM 57 */ + ; /* SODIMM 61 */ + }; + + /* On-module I2C */ + pinctrl_i2c1: i2c1grp { + fsl,pins = + , /* PMIC_I2C_SCL */ + ; /* PMIC_I2C_SDA */ + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = + , /* PMIC_I2C_SCL */ + ; /* PMIC_I2C_SDA */ + }; + + /* Verdin I2C_2_DSI */ + pinctrl_i2c2: i2c2grp { + fsl,pins = + , /* SODIMM 55 */ + ; /* SODIMM 53 */ + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = + , /* SODIMM 55 */ + ; /* SODIMM 53 */ + }; + + /* Verdin I2C_4_CSI */ + pinctrl_i2c3: i2c3grp { + fsl,pins = + , /* SODIMM 95 */ + ; /* SODIMM 93 */ + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = + , /* SODIMM 95 */ + ; /* SODIMM 93 */ + }; + + /* Verdin I2C_1 */ + pinctrl_i2c4: i2c4grp { + fsl,pins = + , /* SODIMM 14 */ + ; /* SODIMM 12 */ + }; + + pinctrl_i2c4_gpio: i2c4gpiogrp { + fsl,pins = + , /* SODIMM 14 */ + ; /* SODIMM 12 */ + }; + + /* Verdin I2S_2_BCLK (TOUCH_RESET#) */ + pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp { + fsl,pins = + ; /* SODIMM 42 */ + }; + + /* Verdin I2S_2_D_OUT shared with SAI3 */ + pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp { + fsl,pins = + ; /* SODIMM 46 */ + }; + + pinctrl_pcie: pciegrp { + fsl,pins = + , /* SODIMM 244 */ + ; /* PMIC_EN_PCIe_CLK, unused */ + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = + ; /* PMIC_INT# */ + }; + + pinctrl_pwm_1: pwm1grp { + fsl,pins = + ; /* SODIMM 15 */ + }; + + pinctrl_pwm_2: pwm2grp { + fsl,pins = + ; /* SODIMM 16 */ + }; + + /* Verdin PWM_3_DSI shared with GPIO3_IO20 */ + pinctrl_pwm_3: pwm3grp { + fsl,pins = + ; /* SODIMM 19 */ + }; + + /* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM3_OUT */ + pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsi1hpdgpiogrp { + fsl,pins = + ; /* SODIMM 19 */ + }; + + pinctrl_reg_eth: regethgrp { + fsl,pins = + ; /* PMIC_EN_ETH */ + }; + + pinctrl_sai1: sai1grp { + fsl,pins = + , /* SODIMM 38 */ + , /* SODIMM 36 */ + , /* SODIMM 30 */ + , /* SODIMM 32 */ + ; /* SODIMM 34 */ + }; + + pinctrl_sai3: sai3grp { + fsl,pins = + , /* SODIMM 48 */ + , /* SODIMM 42 */ + , /* SODIMM 46 */ + ; /* SODIMM 44 */ + }; + + pinctrl_uart1: uart1grp { + fsl,pins = + , /* SODIMM 135 */ + , /* SODIMM 133 */ + , /* SODIMM 129 */ + ; /* SODIMM 131 */ + }; + + pinctrl_uart2: uart2grp { + fsl,pins = + , /* SODIMM 143 */ + , /* SODIMM 141 */ + , /* SODIMM 137 */ + ; /* SODIMM 139 */ + }; + + pinctrl_uart3: uart3grp { + fsl,pins = + , /* SODIMM 147 */ + ; /* SODIMM 149 */ + }; + + /* Non-wifi usage only */ + pinctrl_uart4: uart4grp { + fsl,pins = + , /* SODIMM 151 */ + ; /* SODIMM 153 */ + }; + + pinctrl_usb1_vbus: usb1vbusgrp { + fsl,pins = + ; /* SODIMM 155 */ + }; + + /* USB_1_ID */ + pinctrl_usb_1_id: usb1idgrp { + fsl,pins = + ; /* SODIMM 161 */ + }; + + pinctrl_usb2_vbus: usb2vbusgrp { + fsl,pins = + ; /* SODIMM 185 */ + }; + + /* On-module Wi-Fi */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = + , + , + , + , + , + ; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = + , + , + , + , + , + ; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_cd: usdhc2cdgrp { + fsl,pins = + ; /* SODIMM 84 */ + }; + + pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp { + fsl,pins = + ; /* SODIMM 84 */ + }; + + pinctrl_usdhc2_pwr_en: usdhc2pwrengrp { + fsl,pins = + ; /* SODIMM 76 */ + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = + , /* PMIC_USDHC_VSELECT */ + , /* SODIMM 78 */ + , /* SODIMM 74 */ + , /* SODIMM 80 */ + , /* SODIMM 82 */ + , /* SODIMM 70 */ + ; /* SODIMM 72 */ + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = + , + , + , + , + , + , + ; + }; + + /* Avoid backfeeding with removed card power */ + pinctrl_usdhc2_sleep: usdhc2slpgrp { + fsl,pins = + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = + ; /* PMIC_WDI */ + }; + + pinctrl_bluetooth_ctrl: bluetoothctrlgrp { + fsl,pins = + ; /* WIFI_WKUP_BT */ + }; + + pinctrl_wifi_ctrl: wifictrlgrp { + fsl,pins = + ; /* WIFI_WKUP_WLAN */ + }; + + pinctrl_wifi_i2s: wifii2sgrp { + fsl,pins = + , /* WIFI_TX_SYNC */ + , /* WIFI_RX_DATA0 */ + , /* WIFI_TX_BCLK */ + ; /* WIFI_TX_DATA0 */ + }; + + pinctrl_wifi_pwr_en: wifipwrengrp { + fsl,pins = + ; /* PMIC_EN_WIFI */ + }; +}; diff --git a/dts/src/arm64/freescale/imx8mp.dtsi b/dts/src/arm64/freescale/imx8mp.dtsi index 794d75173c..d9542dfff8 100644 --- a/dts/src/arm64/freescale/imx8mp.dtsi +++ b/dts/src/arm64/freescale/imx8mp.dtsi @@ -4,6 +4,7 @@ */ #include +#include #include #include #include @@ -58,6 +59,9 @@ d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; + operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; }; @@ -75,6 +79,7 @@ d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; }; @@ -92,6 +97,7 @@ d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; }; @@ -109,6 +115,7 @@ d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; }; @@ -121,6 +128,35 @@ }; }; + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <850000>; + opp-supported-hw = <0x8a0>, <0x7>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <950000>; + opp-supported-hw = <0xa0>, <0x7>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1000000>; + opp-supported-hw = <0x20>, <0x3>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + osc_32k: clock-osc-32k { compatible = "fixed-clock"; #clock-cells = <0>; @@ -475,6 +511,94 @@ interrupts = ; #reset-cells = <1>; }; + + gpc: gpc@303a0000 { + compatible = "fsl,imx8mp-gpc"; + reg = <0x303a0000 0x1000>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <3>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_mipi_phy1: power-domain@0 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_pcie_phy: power-domain@1 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_usb1_phy: power-domain@2 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_usb2_phy: power-domain@3 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_gpu2d: power-domain@6 { + #power-domain-cells = <0>; + reg = ; + clocks = <&clk IMX8MP_CLK_GPU2D_ROOT>; + power-domains = <&pgc_gpumix>; + }; + + pgc_gpumix: power-domain@7 { + #power-domain-cells = <0>; + reg = ; + clocks = <&clk IMX8MP_CLK_GPU_ROOT>, + <&clk IMX8MP_CLK_GPU_AHB>; + assigned-clocks = <&clk IMX8MP_CLK_GPU_AXI>, + <&clk IMX8MP_CLK_GPU_AHB>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>, <400000000>; + }; + + pgc_gpu3d: power-domain@9 { + #power-domain-cells = <0>; + reg = ; + clocks = <&clk IMX8MP_CLK_GPU3D_ROOT>, + <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>; + power-domains = <&pgc_gpumix>; + }; + + pgc_mediamix: power-domain@10 { + #power-domain-cells = <0>; + reg = ; + clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + }; + + pgc_mipi_phy2: power-domain@16 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_hsiomix: power-domains@17 { + #power-domain-cells = <0>; + reg = ; + clocks = <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_HSIO_ROOT>; + assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; + assigned-clock-rates = <500000000>; + }; + + pgc_ispdwp: power-domain@18 { + #power-domain-cells = <0>; + reg = ; + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_DIV>; + }; + }; + }; }; aips2: bus@30400000 { @@ -491,7 +615,7 @@ clocks = <&clk IMX8MP_CLK_PWM1_ROOT>, <&clk IMX8MP_CLK_PWM1_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -502,7 +626,7 @@ clocks = <&clk IMX8MP_CLK_PWM2_ROOT>, <&clk IMX8MP_CLK_PWM2_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -513,7 +637,7 @@ clocks = <&clk IMX8MP_CLK_PWM3_ROOT>, <&clk IMX8MP_CLK_PWM3_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -524,7 +648,7 @@ clocks = <&clk IMX8MP_CLK_PWM4_ROOT>, <&clk IMX8MP_CLK_PWM4_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -617,6 +741,8 @@ clocks = <&clk IMX8MP_CLK_UART2_ROOT>, <&clk IMX8MP_CLK_UART2_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -769,7 +895,7 @@ }; usdhc1: mmc@30b40000 { - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_DUMMY>, @@ -783,7 +909,7 @@ }; usdhc2: mmc@30b50000 { - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b50000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_DUMMY>, @@ -797,7 +923,7 @@ }; usdhc3: mmc@30b60000 { - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b60000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_DUMMY>, @@ -892,6 +1018,97 @@ }; }; + aips4: bus@32c00000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x32c00000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + media_blk_ctrl: blk-ctrl@32ec0000 { + compatible = "fsl,imx8mp-media-blk-ctrl", + "syscon"; + reg = <0x32ec0000 0x10000>; + power-domains = <&pgc_mediamix>, + <&pgc_mipi_phy1>, + <&pgc_mipi_phy1>, + <&pgc_mediamix>, + <&pgc_mediamix>, + <&pgc_mipi_phy2>, + <&pgc_mediamix>, + <&pgc_ispdwp>, + <&pgc_ispdwp>, + <&pgc_mipi_phy2>; + power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", + "lcdif1", "isi", "mipi-csi2", + "lcdif2", "isp", "dwe", + "mipi-dsi2"; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>; + clock-names = "apb", "axi", "cam1", "cam2", + "disp1", "disp2", "isp", "phy"; + + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>, + <&clk IMX8MP_CLK_MEDIA_APB>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, + <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <500000000>, <200000000>; + + #power-domain-cells = <1>; + }; + + hsio_blk_ctrl: blk-ctrl@32f10000 { + compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon"; + reg = <0x32f10000 0x24>; + clocks = <&clk IMX8MP_CLK_USB_ROOT>, + <&clk IMX8MP_CLK_PCIE_ROOT>; + clock-names = "usb", "pcie"; + power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>, + <&pgc_usb1_phy>, <&pgc_usb2_phy>, + <&pgc_hsiomix>, <&pgc_pcie_phy>; + power-domain-names = "bus", "usb", "usb-phy1", + "usb-phy2", "pcie", "pcie-phy"; + #power-domain-cells = <1>; + }; + }; + + gpu3d: gpu@38000000 { + compatible = "vivante,gc"; + reg = <0x38000000 0x8000>; + interrupts = ; + clocks = <&clk IMX8MP_CLK_GPU3D_ROOT>, + <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>, + <&clk IMX8MP_CLK_GPU_ROOT>, + <&clk IMX8MP_CLK_GPU_AHB>; + clock-names = "core", "shader", "bus", "reg"; + assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>, + <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>, <800000000>; + power-domains = <&pgc_gpu3d>; + }; + + gpu2d: gpu@38008000 { + compatible = "vivante,gc"; + reg = <0x38008000 0x8000>; + interrupts = ; + clocks = <&clk IMX8MP_CLK_GPU2D_ROOT>, + <&clk IMX8MP_CLK_GPU_ROOT>, + <&clk IMX8MP_CLK_GPU_AHB>; + clock-names = "core", "bus", "reg"; + assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>; + power-domains = <&pgc_gpu2d>; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, @@ -902,6 +1119,12 @@ interrupt-parent = <&gic>; }; + edacmc: memory-controller@3d400000 { + compatible = "snps,ddrc-3.80a"; + reg = <0x3d400000 0x400000>; + interrupts = ; + }; + ddr-pmu@3d800000 { compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu"; reg = <0x3d800000 0x400000>; @@ -915,6 +1138,7 @@ clock-names = "phy"; assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MP_CLK_24M>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY1>; #phy-cells = <0>; status = "disabled"; }; @@ -927,6 +1151,7 @@ <&clk IMX8MP_CLK_USB_ROOT>; clock-names = "hsio", "suspend"; interrupts = ; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>; #address-cells = <1>; #size-cells = <1>; dma-ranges = <0x40000000 0x40000000 0xc0000000>; @@ -940,9 +1165,6 @@ <&clk IMX8MP_CLK_USB_CORE_REF>, <&clk IMX8MP_CLK_USB_ROOT>; clock-names = "bus_early", "ref", "suspend"; - assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; - assigned-clock-rates = <500000000>; interrupts = ; phys = <&usb3_phy0>, <&usb3_phy0>; phy-names = "usb2-phy", "usb3-phy"; @@ -958,6 +1180,7 @@ clock-names = "phy"; assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MP_CLK_24M>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY2>; #phy-cells = <0>; status = "disabled"; }; @@ -970,6 +1193,7 @@ <&clk IMX8MP_CLK_USB_ROOT>; clock-names = "hsio", "suspend"; interrupts = ; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>; #address-cells = <1>; #size-cells = <1>; dma-ranges = <0x40000000 0x40000000 0xc0000000>; @@ -983,9 +1207,6 @@ <&clk IMX8MP_CLK_USB_CORE_REF>, <&clk IMX8MP_CLK_USB_ROOT>; clock-names = "bus_early", "ref", "suspend"; - assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; - assigned-clock-rates = <500000000>; interrupts = ; phys = <&usb3_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; diff --git a/dts/src/arm64/freescale/imx8mq-kontron-pitx-imx8m.dts b/dts/src/arm64/freescale/imx8mq-kontron-pitx-imx8m.dts index 564746d500..a91c136797 100644 --- a/dts/src/arm64/freescale/imx8mq-kontron-pitx-imx8m.dts +++ b/dts/src/arm64/freescale/imx8mq-kontron-pitx-imx8m.dts @@ -311,7 +311,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; assigned-clocks = <&clk IMX8MQ_CLK_UART3>; assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; status = "okay"; diff --git a/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts index 622f3787a1..b86f188a44 100644 --- a/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts +++ b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts @@ -18,7 +18,7 @@ backlight_dsi: backlight-dsi { compatible = "pwm-backlight"; /* 200 Hz for the PAM2841 */ - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 100>; num-interpolated-steps = <100>; /* Default brightness level (index into the array defined by */ diff --git a/dts/src/arm64/freescale/imx8mq-librem5-r4.dts b/dts/src/arm64/freescale/imx8mq-librem5-r4.dts index 30d65bef69..1056b7981b 100644 --- a/dts/src/arm64/freescale/imx8mq-librem5-r4.dts +++ b/dts/src/arm64/freescale/imx8mq-librem5-r4.dts @@ -18,6 +18,10 @@ led-max-microamp = <25000>; }; +&lcd_panel { + compatible = "ys,ys57pss36bh5gq"; +}; + &proximity { proximity-near-level = <10>; }; diff --git a/dts/src/arm64/freescale/imx8mq-librem5.dtsi b/dts/src/arm64/freescale/imx8mq-librem5.dtsi index 05c16376b4..587e55aaa5 100644 --- a/dts/src/arm64/freescale/imx8mq-librem5.dtsi +++ b/dts/src/arm64/freescale/imx8mq-librem5.dtsi @@ -42,6 +42,7 @@ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <50>; + wakeup-source; }; vol-up { @@ -49,6 +50,7 @@ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <50>; + wakeup-source; }; }; @@ -323,15 +325,10 @@ }; partition@30000 { - label = "protected1"; - reg = <0x30000 0x10000>; + label = "firmware"; + reg = <0x30000 0x1d0000>; read-only; }; - - partition@40000 { - label = "rw"; - reg = <0x40000 0x1C0000>; - }; }; }; @@ -387,8 +384,6 @@ fsl,pins = < /* CHRG_INT */ MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80 - /* CHG_STATUS_B */ - MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80 >; }; @@ -1098,7 +1093,7 @@ ti,precharge-current = <130000>; /* uA */ ti,minimum-sys-voltage = <3700000>; /* uV */ ti,boost-voltage = <5000000>; /* uV */ - ti,boost-max-current = <500000>; /* uA */ + ti,boost-max-current = <1500000>; /* uA */ ti,use-vinmin-threshold = <1>; /* enable VINDPM */ ti,vinmin-threshold = <3900000>; /* uV */ monitored-battery = <&bat>; diff --git a/dts/src/arm64/freescale/imx8mq-mnt-reform2.dts b/dts/src/arm64/freescale/imx8mq-mnt-reform2.dts index 94a13cb500..8956a46788 100644 --- a/dts/src/arm64/freescale/imx8mq-mnt-reform2.dts +++ b/dts/src/arm64/freescale/imx8mq-mnt-reform2.dts @@ -18,7 +18,7 @@ compatible = "pwm-backlight"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_backlight>; - pwms = <&pwm2 0 10000>; + pwms = <&pwm2 0 10000 0>; power-supply = <®_main_usb>; enable-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; brightness-levels = <0 32 64 128 160 200 255>; diff --git a/dts/src/arm64/freescale/imx8mq.dtsi b/dts/src/arm64/freescale/imx8mq.dtsi index 5b3e849f55..49eadb081b 100644 --- a/dts/src/arm64/freescale/imx8mq.dtsi +++ b/dts/src/arm64/freescale/imx8mq.dtsi @@ -63,6 +63,13 @@ clock-output-names = "osc_27m"; }; + hdmi_phy_27m: clock-hdmi-phy-27m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "hdmi_phy_27m"; + }; + clk_ext1: clock-ext1 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -791,7 +798,7 @@ clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>, <&clk IMX8MQ_CLK_PWM1_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -802,7 +809,7 @@ clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>, <&clk IMX8MQ_CLK_PWM2_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -813,7 +820,7 @@ clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>, <&clk IMX8MQ_CLK_PWM3_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -824,7 +831,7 @@ clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>, <&clk IMX8MQ_CLK_PWM4_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; diff --git a/dts/src/arm64/freescale/imx8qxp-mek.dts b/dts/src/arm64/freescale/imx8qxp-mek.dts index 863232a470..07d8dd8160 100644 --- a/dts/src/arm64/freescale/imx8qxp-mek.dts +++ b/dts/src/arm64/freescale/imx8qxp-mek.dts @@ -135,6 +135,14 @@ status = "okay"; }; +&mu_m0 { + status = "okay"; +}; + +&mu1_m0 { + status = "okay"; +}; + &scu_key { status = "okay"; }; @@ -196,6 +204,23 @@ status = "okay"; }; +&vpu { + compatible = "nxp,imx8qxp-vpu"; + status = "okay"; +}; + +&vpu_core0 { + reg = <0x2d040000 0x10000>; + memory-region = <&decoder_boot>, <&decoder_rpc>; + status = "okay"; +}; + +&vpu_core1 { + reg = <0x2d050000 0x10000>; + memory-region = <&encoder_boot>, <&encoder_rpc>; + status = "okay"; +}; + &iomuxc { pinctrl_fec1: fec1grp { fsl,pins = < diff --git a/dts/src/arm64/freescale/imx8qxp.dtsi b/dts/src/arm64/freescale/imx8qxp.dtsi index dbec7c106e..a79ae33cba 100644 --- a/dts/src/arm64/freescale/imx8qxp.dtsi +++ b/dts/src/arm64/freescale/imx8qxp.dtsi @@ -46,6 +46,9 @@ serial1 = &lpuart1; serial2 = &lpuart2; serial3 = &lpuart3; + vpu_core0 = &vpu_core0; + vpu_core1 = &vpu_core1; + vpu_core2 = &vpu_core2; }; cpus { @@ -162,10 +165,30 @@ #size-cells = <2>; ranges; + decoder_boot: decoder-boot@84000000 { + reg = <0 0x84000000 0 0x2000000>; + no-map; + }; + + encoder_boot: encoder-boot@86000000 { + reg = <0 0x86000000 0 0x200000>; + no-map; + }; + + decoder_rpc: decoder-rpc@92000000 { + reg = <0 0x92000000 0 0x100000>; + no-map; + }; + dsp_reserved: dsp@92400000 { reg = <0 0x92400000 0 0x2000000>; no-map; }; + + encoder_rpc: encoder-rpc@94400000 { + reg = <0 0x94400000 0 0x700000>; + no-map; + }; }; pmu { @@ -287,6 +310,7 @@ /* sorted in register address */ #include "imx8-ss-img.dtsi" + #include "imx8-ss-vpu.dtsi" #include "imx8-ss-adma.dtsi" #include "imx8-ss-conn.dtsi" #include "imx8-ss-ddr.dtsi" diff --git a/dts/src/arm64/hisilicon/hi3660.dtsi b/dts/src/arm64/hisilicon/hi3660.dtsi index 8bd6d7e8a4..6b3057a092 100644 --- a/dts/src/arm64/hisilicon/hi3660.dtsi +++ b/dts/src/arm64/hisilicon/hi3660.dtsi @@ -1045,8 +1045,8 @@ clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>, <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>; clock-names = "ref_clk", "phy_clk"; - freq-table-hz = <0 0 - 0 0>; + freq-table-hz = <0 0>, + <0 0>; /* offset: 0x84; bit: 12 */ resets = <&crg_rst 0x84 12>; reset-names = "rst"; diff --git a/dts/src/arm64/hisilicon/hi3670.dtsi b/dts/src/arm64/hisilicon/hi3670.dtsi index 636c8817df..3125c3869c 100644 --- a/dts/src/arm64/hisilicon/hi3670.dtsi +++ b/dts/src/arm64/hisilicon/hi3670.dtsi @@ -671,8 +671,8 @@ clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>, <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>; clock-names = "ref_clk", "phy_clk"; - freq-table-hz = <0 0 - 0 0>; + freq-table-hz = <0 0>, + <0 0>; /* offset: 0x84; bit: 12 */ resets = <&crg_rst 0x84 12>; reset-names = "rst"; diff --git a/dts/src/arm64/intel/socfpga_agilex.dtsi b/dts/src/arm64/intel/socfpga_agilex.dtsi index c78371703e..caccb0334a 100644 --- a/dts/src/arm64/intel/socfpga_agilex.dtsi +++ b/dts/src/arm64/intel/socfpga_agilex.dtsi @@ -350,8 +350,6 @@ , ; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; reset-names = "dma", "dma-ocp"; clocks = <&clkmgr AGILEX_L4_MAIN_CLK>; diff --git a/dts/src/arm64/intel/socfpga_agilex_n6000.dts b/dts/src/arm64/intel/socfpga_agilex_n6000.dts new file mode 100644 index 0000000000..6231a69204 --- /dev/null +++ b/dts/src/arm64/intel/socfpga_agilex_n6000.dts @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021-2022, Intel Corporation + */ +#include "socfpga_agilex.dtsi" + +/ { + model = "SoCFPGA Agilex n6000"; + compatible = "intel,socfpga-agilex-n6000", "intel,socfpga-agilex"; + + aliases { + serial0 = &uart1; + serial1 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + soc { + bus@80000000 { + compatible = "simple-bus"; + reg = <0x80000000 0x60000000>, + <0xf9000000 0x00100000>; + reg-names = "axi_h2f", "axi_h2f_lw"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>; + + dma-controller@0 { + compatible = "intel,hps-copy-engine"; + reg = <0x00000000 0x00000000 0x00001000>; + #dma-cells = <1>; + }; + }; + }; +}; + +&osc1 { + clock-frequency = <25000000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; + +&fpga_mgr { + status = "disabled"; +}; diff --git a/dts/src/arm64/marvell/armada-3720-db.dts b/dts/src/arm64/marvell/armada-3720-db.dts index 3e5789f372..bd4e61d544 100644 --- a/dts/src/arm64/marvell/armada-3720-db.dts +++ b/dts/src/arm64/marvell/armada-3720-db.dts @@ -164,7 +164,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi_quad_pins>; - m25p80@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <108000000>; diff --git a/dts/src/arm64/marvell/armada-3720-espressobin-ultra.dts b/dts/src/arm64/marvell/armada-3720-espressobin-ultra.dts index c5eb3604dd..070725b81b 100644 --- a/dts/src/arm64/marvell/armada-3720-espressobin-ultra.dts +++ b/dts/src/arm64/marvell/armada-3720-espressobin-ultra.dts @@ -71,10 +71,6 @@ &spi0 { flash@0 { - spi-max-frequency = <108000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; - partitions { compatible = "fixed-partitions"; #address-cells = <1>; @@ -112,18 +108,21 @@ &usb3 { usb-phy = <&usb3_phy>; - status = "disabled"; }; &mdio { extphy: ethernet-phy@1 { reg = <1>; + + reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>; }; }; &switch0 { reg = <3>; + reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>; + ports { switch0port1: port@1 { reg = <1>; diff --git a/dts/src/arm64/marvell/armada-3720-turris-mox.dts b/dts/src/arm64/marvell/armada-3720-turris-mox.dts index 1cee26479b..caf9c8529f 100644 --- a/dts/src/arm64/marvell/armada-3720-turris-mox.dts +++ b/dts/src/arm64/marvell/armada-3720-turris-mox.dts @@ -211,7 +211,7 @@ assigned-clock-parents = <&tbg 1>; assigned-clock-rates = <20000000>; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; @@ -303,7 +303,7 @@ /* switch nodes are enabled by U-Boot if modules are present */ switch0@10 { compatible = "marvell,mv88e6190"; - reg = <0x10 0>; + reg = <0x10>; dsa,member = <0 0>; interrupt-parent = <&moxtet>; interrupts = ; @@ -428,7 +428,7 @@ switch0@2 { compatible = "marvell,mv88e6085"; - reg = <0x2 0>; + reg = <0x2>; dsa,member = <0 0>; interrupt-parent = <&moxtet>; interrupts = ; @@ -495,7 +495,7 @@ switch1@11 { compatible = "marvell,mv88e6190"; - reg = <0x11 0>; + reg = <0x11>; dsa,member = <0 1>; interrupt-parent = <&moxtet>; interrupts = ; @@ -620,7 +620,7 @@ switch1@2 { compatible = "marvell,mv88e6085"; - reg = <0x2 0>; + reg = <0x2>; dsa,member = <0 1>; interrupt-parent = <&moxtet>; interrupts = ; @@ -687,7 +687,7 @@ switch2@12 { compatible = "marvell,mv88e6190"; - reg = <0x12 0>; + reg = <0x12>; dsa,member = <0 2>; interrupt-parent = <&moxtet>; interrupts = ; @@ -803,7 +803,7 @@ switch2@2 { compatible = "marvell,mv88e6085"; - reg = <0x2 0>; + reg = <0x2>; dsa,member = <0 2>; interrupt-parent = <&moxtet>; interrupts = ; diff --git a/dts/src/arm64/marvell/armada-3720-uDPU.dts b/dts/src/arm64/marvell/armada-3720-uDPU.dts index 95d46e8d08..a35317d24d 100644 --- a/dts/src/arm64/marvell/armada-3720-uDPU.dts +++ b/dts/src/arm64/marvell/armada-3720-uDPU.dts @@ -99,7 +99,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi_quad_pins>; - m25p80@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <54000000>; @@ -108,10 +108,15 @@ compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; - /* only bootloader is located on the SPI */ + partition@0 { - label = "uboot"; - reg = <0 0x400000>; + label = "firmware"; + reg = <0x0 0x180000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; }; }; }; @@ -148,15 +153,15 @@ scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - lm75@48 { + nct375@48 { status = "okay"; - compatible = "lm75"; + compatible = "ti,tmp75c"; reg = <0x48>; }; - lm75@49 { + nct375@49 { status = "okay"; - compatible = "lm75"; + compatible = "ti,tmp75c"; reg = <0x49>; }; }; diff --git a/dts/src/arm64/marvell/armada-37xx.dtsi b/dts/src/arm64/marvell/armada-37xx.dtsi index 8c8bb97c9d..df152c7227 100644 --- a/dts/src/arm64/marvell/armada-37xx.dtsi +++ b/dts/src/arm64/marvell/armada-37xx.dtsi @@ -444,7 +444,7 @@ #mbox-cells = <1>; }; - sdhci1: sdhci@d0000 { + sdhci1: mmc@d0000 { compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; reg = <0xd0000 0x300>, @@ -455,7 +455,7 @@ status = "disabled"; }; - sdhci0: sdhci@d8000 { + sdhci0: mmc@d8000 { compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; reg = <0xd8000 0x300>, diff --git a/dts/src/arm64/marvell/armada-7040-db.dts b/dts/src/arm64/marvell/armada-7040-db.dts index cd326fe224..5e5baf6bee 100644 --- a/dts/src/arm64/marvell/armada-7040-db.dts +++ b/dts/src/arm64/marvell/armada-7040-db.dts @@ -83,7 +83,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; @@ -186,7 +186,7 @@ &cp0_spi1 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <20000000>; diff --git a/dts/src/arm64/marvell/armada-7040-mochabin.dts b/dts/src/arm64/marvell/armada-7040-mochabin.dts index f3b0d57a24..39a8e5e99d 100644 --- a/dts/src/arm64/marvell/armada-7040-mochabin.dts +++ b/dts/src/arm64/marvell/armada-7040-mochabin.dts @@ -155,7 +155,7 @@ pinctrl-names = "default"; pinctrl-0 = <&cp0_spi1_pins>; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts index 8729c64673..871f84b4a6 100644 --- a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts +++ b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts @@ -589,7 +589,7 @@ pinctrl-0 = <&cp1_spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "st,w25q32"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/dts/src/arm64/marvell/armada-8040-db.dts b/dts/src/arm64/marvell/armada-8040-db.dts index f2e8e0df88..92897bd7e6 100644 --- a/dts/src/arm64/marvell/armada-8040-db.dts +++ b/dts/src/arm64/marvell/armada-8040-db.dts @@ -72,7 +72,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; @@ -238,7 +238,7 @@ &cp1_spi1 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <20000000>; diff --git a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi index adbfecc678..779cf167c3 100644 --- a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi +++ b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi @@ -360,7 +360,7 @@ pinctrl-0 = <&cp1_spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "st,w25q32"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/dts/src/arm64/marvell/armada-8040-puzzle-m801.dts b/dts/src/arm64/marvell/armada-8040-puzzle-m801.dts index dac85fa748..74bed79e4f 100644 --- a/dts/src/arm64/marvell/armada-8040-puzzle-m801.dts +++ b/dts/src/arm64/marvell/armada-8040-puzzle-m801.dts @@ -185,7 +185,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <0x1>; #size-cells = <0x1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm64/marvell/armada-ap80x.dtsi b/dts/src/arm64/marvell/armada-ap80x.dtsi index 6614472100..a06a0a889c 100644 --- a/dts/src/arm64/marvell/armada-ap80x.dtsi +++ b/dts/src/arm64/marvell/armada-ap80x.dtsi @@ -250,7 +250,7 @@ interrupts = ; }; - ap_sdhci0: sdhci@6e0000 { + ap_sdhci0: mmc@6e0000 { compatible = "marvell,armada-ap806-sdhci"; reg = <0x6e0000 0x300>; interrupts = ; diff --git a/dts/src/arm64/marvell/armada-cp11x.dtsi b/dts/src/arm64/marvell/armada-cp11x.dtsi index 3bd2182817..d6c0990a26 100644 --- a/dts/src/arm64/marvell/armada-cp11x.dtsi +++ b/dts/src/arm64/marvell/armada-cp11x.dtsi @@ -493,7 +493,7 @@ status = "okay"; }; - CP11X_LABEL(sdhci0): sdhci@780000 { + CP11X_LABEL(sdhci0): mmc@780000 { compatible = "marvell,armada-cp110-sdhci"; reg = <0x780000 0x300>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/marvell/cn9130-crb.dtsi b/dts/src/arm64/marvell/cn9130-crb.dtsi index d9f9f2c197..1acd746284 100644 --- a/dts/src/arm64/marvell/cn9130-crb.dtsi +++ b/dts/src/arm64/marvell/cn9130-crb.dtsi @@ -175,7 +175,7 @@ <0x2000000 0x1000000>; /* CS0 */ status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <0x1>; #size-cells = <0x1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm64/marvell/cn9130-db.dtsi b/dts/src/arm64/marvell/cn9130-db.dtsi index c00b69b88b..7e20987253 100644 --- a/dts/src/arm64/marvell/cn9130-db.dtsi +++ b/dts/src/arm64/marvell/cn9130-db.dtsi @@ -310,7 +310,7 @@ pinctrl-0 = <&cp0_spi0_pins>; reg = <0x700680 0x50>; - spi-flash@0 { + flash@0 { #address-cells = <0x1>; #size-cells = <0x1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm64/marvell/cn9131-db.dtsi b/dts/src/arm64/marvell/cn9131-db.dtsi index f995b1bcda..b7fc241a22 100644 --- a/dts/src/arm64/marvell/cn9131-db.dtsi +++ b/dts/src/arm64/marvell/cn9131-db.dtsi @@ -137,7 +137,7 @@ pinctrl-0 = <&cp1_spi0_pins>; reg = <0x700680 0x50>; - spi-flash@0 { + flash@0 { #address-cells = <0x1>; #size-cells = <0x1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm64/mediatek/mt2712e.dtsi b/dts/src/arm64/mediatek/mt2712e.dtsi index a27b7628c5..623eb3beab 100644 --- a/dts/src/arm64/mediatek/mt2712e.dtsi +++ b/dts/src/arm64/mediatek/mt2712e.dtsi @@ -19,7 +19,7 @@ #address-cells = <2>; #size-cells = <2>; - cluster0_opp: opp_table0 { + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; opp00 { @@ -36,7 +36,7 @@ }; }; - cluster1_opp: opp_table1 { + cluster1_opp: opp-table-1 { compatible = "operating-points-v2"; opp-shared; opp00 { @@ -329,8 +329,8 @@ interrupts = ; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2 - &larb3 &larb6>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, + <&larb3>, <&larb6>; #iommu-cells = <1>; }; @@ -346,7 +346,7 @@ interrupts = ; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb4 &larb5 &larb7>; + mediatek,larbs = <&larb4>, <&larb5>, <&larb7>; #iommu-cells = <1>; }; diff --git a/dts/src/arm64/mediatek/mt6359.dtsi b/dts/src/arm64/mediatek/mt6359.dtsi new file mode 100644 index 0000000000..df3e822232 --- /dev/null +++ b/dts/src/arm64/mediatek/mt6359.dtsi @@ -0,0 +1,298 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2022 MediaTek Inc. + */ + +&pwrap { + pmic: pmic { + compatible = "mediatek,mt6359"; + interrupt-controller; + #interrupt-cells = <2>; + + mt6359codec: mt6359codec { + }; + + regulators { + mt6359_vs1_buck_reg: buck_vs1 { + regulator-name = "vs1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + mt6359_vgpu11_buck_reg: buck_vgpu11 { + regulator-name = "vgpu11"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vmodem_buck_reg: buck_vmodem { + regulator-name = "vmodem"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <10760>; + regulator-enable-ramp-delay = <200>; + }; + mt6359_vpu_buck_reg: buck_vpu { + regulator-name = "vpu"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vcore_buck_reg: buck_vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vs2_buck_reg: buck_vs2 { + regulator-name = "vs2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1600000>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + mt6359_vpa_buck_reg: buck_vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3650000>; + regulator-enable-ramp-delay = <300>; + }; + mt6359_vproc2_buck_reg: buck_vproc2 { + regulator-name = "vproc2"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vproc1_buck_reg: buck_vproc1 { + regulator-name = "vproc1"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vcore_sshub_buck_reg: buck_vcore_sshub { + regulator-name = "vcore_sshub"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + }; + mt6359_vgpu11_sshub_buck_reg: buck_vgpu11_sshub { + regulator-name = "vgpu11_sshub"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + }; + mt6359_vaud18_ldo_reg: ldo_vaud18 { + regulator-name = "vaud18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vsim1_ldo_reg: ldo_vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6359_vibr_ldo_reg: ldo_vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vrf12_ldo_reg: ldo_vrf12 { + regulator-name = "vrf12"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + }; + mt6359_vusb_ldo_reg: ldo_vusb { + regulator-name = "vusb"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <960>; + regulator-always-on; + }; + mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 { + regulator-name = "vsram_proc2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vio18_ldo_reg: ldo_vio18 { + regulator-name = "vio18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <960>; + regulator-always-on; + }; + mt6359_vcamio_ldo_reg: ldo_vcamio { + regulator-name = "vcamio"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + mt6359_vcn18_ldo_reg: ldo_vcn18 { + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vfe28_ldo_reg: ldo_vfe28 { + regulator-name = "vfe28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <120>; + }; + mt6359_vcn13_ldo_reg: ldo_vcn13 { + regulator-name = "vcn13"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + }; + mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt { + regulator-name = "vcn33_1_bt"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi { + regulator-name = "vcn33_1_wifi"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vaux18_ldo_reg: ldo_vaux18 { + regulator-name = "vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vsram_others_ldo_reg: ldo_vsram_others { + regulator-name = "vsram_others"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vefuse_ldo_reg: ldo_vefuse { + regulator-name = "vefuse"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + }; + mt6359_vxo22_ldo_reg: ldo_vxo22 { + regulator-name = "vxo22"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + mt6359_vrfck_ldo_reg: ldo_vrfck { + regulator-name = "vrfck"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1700000>; + }; + mt6359_vrfck_1_ldo_reg: ldo_vrfck_1 { + regulator-name = "vrfck"; + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1600000>; + }; + mt6359_vbif28_ldo_reg: ldo_vbif28 { + regulator-name = "vbif28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vio28_ldo_reg: ldo_vio28 { + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + mt6359_vemc_ldo_reg: ldo_vemc { + regulator-name = "vemc"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vemc_1_ldo_reg: ldo_vemc_1 { + regulator-name = "vemc"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt { + regulator-name = "vcn33_2_bt"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi { + regulator-name = "vcn33_2_wifi"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_va12_ldo_reg: ldo_va12 { + regulator-name = "va12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + mt6359_va09_ldo_reg: ldo_va09 { + regulator-name = "va09"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + }; + mt6359_vrf18_ldo_reg: ldo_vrf18 { + regulator-name = "vrf18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1810000>; + }; + mt6359_vsram_md_ldo_reg: ldo_vsram_md { + regulator-name = "vsram_md"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <10760>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vufs_ldo_reg: ldo_vufs { + regulator-name = "vufs"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + mt6359_vm18_ldo_reg: ldo_vm18 { + regulator-name = "vm18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-always-on; + }; + mt6359_vbbck_ldo_reg: ldo_vbbck { + regulator-name = "vbbck"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + }; + mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 { + regulator-name = "vsram_proc1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vsim2_ldo_reg: ldo_vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub { + regulator-name = "vsram_others_sshub"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + }; + }; + + mt6359rtc: mt6359rtc { + compatible = "mediatek,mt6358-rtc"; + }; + }; +}; diff --git a/dts/src/arm64/mediatek/mt7622.dtsi b/dts/src/arm64/mediatek/mt7622.dtsi index 6f8cb3ad1e..dbcee8b4d8 100644 --- a/dts/src/arm64/mediatek/mt7622.dtsi +++ b/dts/src/arm64/mediatek/mt7622.dtsi @@ -80,6 +80,7 @@ enable-method = "psci"; clock-frequency = <1300000000>; cci-control-port = <&cci_control2>; + next-level-cache = <&L2>; }; cpu1: cpu@1 { @@ -94,6 +95,12 @@ enable-method = "psci"; clock-frequency = <1300000000>; cci-control-port = <&cci_control2>; + next-level-cache = <&L2>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; }; }; @@ -357,7 +364,7 @@ }; cci_control2: slave-if@5000 { - compatible = "arm,cci-400-ctrl-if"; + compatible = "arm,cci-400-ctrl-if", "syscon"; interface-type = "ace"; reg = <0x5000 0x1000>; }; @@ -545,6 +552,18 @@ status = "disabled"; }; + snfi: spi@1100d000 { + compatible = "mediatek,mt7622-snand"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = ; + clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>; + clock-names = "nfi_clk", "pad_clk"; + nand-ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + bch: ecc@1100e000 { compatible = "mediatek,mt7622-ecc"; reg = <0 0x1100e000 0 0x1000>; @@ -901,6 +920,11 @@ }; }; + hifsys: syscon@1af00000 { + compatible = "mediatek,mt7622-hifsys", "syscon"; + reg = <0 0x1af00000 0 0x70>; + }; + ethsys: syscon@1b000000 { compatible = "mediatek,mt7622-ethsys", "syscon"; @@ -917,6 +941,27 @@ clock-names = "hsdma"; power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; #dma-cells = <1>; + dma-requests = <3>; + }; + + pcie_mirror: pcie-mirror@10000400 { + compatible = "mediatek,mt7622-pcie-mirror", + "syscon"; + reg = <0 0x10000400 0 0x10>; + }; + + wed0: wed@1020a000 { + compatible = "mediatek,mt7622-wed", + "syscon"; + reg = <0 0x1020a000 0 0x1000>; + interrupts = ; + }; + + wed1: wed@1020b000 { + compatible = "mediatek,mt7622-wed", + "syscon"; + reg = <0 0x1020b000 0 0x1000>; + interrupts = ; }; eth: ethernet@1b100000 { @@ -945,6 +990,11 @@ power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; mediatek,ethsys = <ðsys>; mediatek,sgmiisys = <&sgmiisys>; + cci-control-port = <&cci_control2>; + mediatek,wed = <&wed0>, <&wed1>; + mediatek,pcie-mirror = <&pcie_mirror>; + mediatek,hifsys = <&hifsys>; + dma-coherent; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/dts/src/arm64/mediatek/mt7986a-rfb.dts b/dts/src/arm64/mediatek/mt7986a-rfb.dts index 21e4208295..882277a52b 100644 --- a/dts/src/arm64/mediatek/mt7986a-rfb.dts +++ b/dts/src/arm64/mediatek/mt7986a-rfb.dts @@ -25,6 +25,80 @@ }; }; +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio { + switch: switch@0 { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 5 0>; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + &uart0 { status = "okay"; }; diff --git a/dts/src/arm64/mediatek/mt7986a.dtsi b/dts/src/arm64/mediatek/mt7986a.dtsi index 694acf8f5b..d2636a0ed1 100644 --- a/dts/src/arm64/mediatek/mt7986a.dtsi +++ b/dts/src/arm64/mediatek/mt7986a.dtsi @@ -222,6 +222,45 @@ #reset-cells = <1>; }; + eth: ethernet@15100000 { + compatible = "mediatek,mt7986-eth"; + reg = <0 0x15100000 0 0x80000>; + interrupts = , + , + , + ; + clocks = <ðsys CLK_ETH_FE_EN>, + <ðsys CLK_ETH_GP2_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_WOCPU1_EN>, + <ðsys CLK_ETH_WOCPU0_EN>, + <&sgmiisys0 CLK_SGMII0_TX250M_EN>, + <&sgmiisys0 CLK_SGMII0_RX250M_EN>, + <&sgmiisys0 CLK_SGMII0_CDR_REF>, + <&sgmiisys0 CLK_SGMII0_CDR_FB>, + <&sgmiisys1 CLK_SGMII1_TX250M_EN>, + <&sgmiisys1 CLK_SGMII1_RX250M_EN>, + <&sgmiisys1 CLK_SGMII1_CDR_REF>, + <&sgmiisys1 CLK_SGMII1_CDR_FB>, + <&topckgen CLK_TOP_NETSYS_SEL>, + <&topckgen CLK_TOP_NETSYS_500M_SEL>; + clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", + "sgmii2_tx250m", "sgmii2_rx250m", + "sgmii2_cdr_ref", "sgmii2_cdr_fb", + "netsys0", "netsys1"; + assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>, + <&topckgen CLK_TOP_SGM_325M_SEL>; + assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>, + <&apmixedsys CLK_APMIXED_SGMPLL>; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>; + #reset-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; }; diff --git a/dts/src/arm64/mediatek/mt7986b-rfb.dts b/dts/src/arm64/mediatek/mt7986b-rfb.dts index d73467ea36..0f49d5764f 100644 --- a/dts/src/arm64/mediatek/mt7986b-rfb.dts +++ b/dts/src/arm64/mediatek/mt7986b-rfb.dts @@ -28,3 +28,73 @@ &uart0 { status = "okay"; }; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 5 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + }; + }; +}; diff --git a/dts/src/arm64/mediatek/mt8167.dtsi b/dts/src/arm64/mediatek/mt8167.dtsi index 9029051624..54655f2feb 100644 --- a/dts/src/arm64/mediatek/mt8167.dtsi +++ b/dts/src/arm64/mediatek/mt8167.dtsi @@ -174,7 +174,7 @@ iommu: m4u@10203000 { compatible = "mediatek,mt8167-m4u"; reg = <0 0x10203000 0 0x1000>; - mediatek,larbs = <&larb0 &larb1 &larb2>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>; interrupts = ; #iommu-cells = <1>; }; diff --git a/dts/src/arm64/mediatek/mt8173.dtsi b/dts/src/arm64/mediatek/mt8173.dtsi index 2b7d331a45..40d7b47fc5 100644 --- a/dts/src/arm64/mediatek/mt8173.dtsi +++ b/dts/src/arm64/mediatek/mt8173.dtsi @@ -57,7 +57,7 @@ serial3 = &uart3; }; - cluster0_opp: opp_table0 { + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; opp-507000000 { @@ -94,7 +94,7 @@ }; }; - cluster1_opp: opp_table1 { + cluster1_opp: opp-table-1 { compatible = "operating-points-v2"; opp-shared; opp-507000000 { @@ -273,7 +273,7 @@ }; thermal-zones { - cpu_thermal: cpu_thermal { + cpu_thermal: cpu-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ @@ -588,8 +588,8 @@ interrupts = ; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2 - &larb3 &larb4 &larb5>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, + <&larb3>, <&larb4>, <&larb5>; #iommu-cells = <1>; }; @@ -1010,7 +1010,6 @@ <&mmsys CLK_MM_MUTEX_32K>; power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_RDMA0>; - mediatek,larb = <&larb0>; mediatek,vpu = <&vpu>; }; @@ -1021,7 +1020,6 @@ <&mmsys CLK_MM_MUTEX_32K>; power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_RDMA1>; - mediatek,larb = <&larb4>; }; mdp_rsz0: rsz@14003000 { @@ -1051,7 +1049,6 @@ clocks = <&mmsys CLK_MM_MDP_WDMA>; power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WDMA>; - mediatek,larb = <&larb0>; }; mdp_wrot0: wrot@14007000 { @@ -1060,7 +1057,6 @@ clocks = <&mmsys CLK_MM_MDP_WROT0>; power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WROT0>; - mediatek,larb = <&larb0>; }; mdp_wrot1: wrot@14008000 { @@ -1069,7 +1065,6 @@ clocks = <&mmsys CLK_MM_MDP_WROT1>; power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WROT1>; - mediatek,larb = <&larb4>; }; ovl0: ovl@1400c000 { @@ -1079,7 +1074,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_OVL0>; iommus = <&iommu M4U_PORT_DISP_OVL0>; - mediatek,larb = <&larb0>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>; }; @@ -1090,7 +1084,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_OVL1>; iommus = <&iommu M4U_PORT_DISP_OVL1>; - mediatek,larb = <&larb4>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>; }; @@ -1101,7 +1094,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_RDMA0>; iommus = <&iommu M4U_PORT_DISP_RDMA0>; - mediatek,larb = <&larb0>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>; }; @@ -1112,7 +1104,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_RDMA1>; iommus = <&iommu M4U_PORT_DISP_RDMA1>; - mediatek,larb = <&larb4>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>; }; @@ -1123,7 +1114,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_RDMA2>; iommus = <&iommu M4U_PORT_DISP_RDMA2>; - mediatek,larb = <&larb4>; mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>; }; @@ -1134,7 +1124,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_WDMA0>; iommus = <&iommu M4U_PORT_DISP_WDMA0>; - mediatek,larb = <&larb0>; mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>; }; @@ -1145,7 +1134,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_WDMA1>; iommus = <&iommu M4U_PORT_DISP_WDMA1>; - mediatek,larb = <&larb4>; mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>; }; @@ -1290,6 +1278,7 @@ interrupts = ; power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_MUTEX_32K>; + mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0 0x1000>; mediatek,gce-events = , ; }; @@ -1399,7 +1388,6 @@ <0 0x16027800 0 0x800>, /* VDEC_HWB */ <0 0x16028400 0 0x400>; /* VDEC_HWG */ interrupts = ; - mediatek,larb = <&larb1>; iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, <&iommu M4U_PORT_HW_VDEC_PP_EXT>, <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>, @@ -1467,7 +1455,6 @@ compatible = "mediatek,mt8173-vcodec-enc"; reg = <0 0x18002000 0 0x1000>; /* VENC_SYS */ interrupts = ; - mediatek,larb = <&larb3>; iommus = <&iommu M4U_PORT_VENC_RCPU>, <&iommu M4U_PORT_VENC_REC>, <&iommu M4U_PORT_VENC_BSDMA>, @@ -1484,6 +1471,7 @@ clock-names = "venc_sel"; assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>; }; jpegdec: jpegdec@18004000 { @@ -1495,7 +1483,6 @@ clock-names = "jpgdec-smi", "jpgdec"; power-domains = <&spm MT8173_POWER_DOMAIN_VENC>; - mediatek,larb = <&larb3>; iommus = <&iommu M4U_PORT_JPGDEC_WDMA>, <&iommu M4U_PORT_JPGDEC_BSDMA>; }; @@ -1529,13 +1516,13 @@ <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>, <&iommu M4U_PORT_VENC_REF_LUMA_SET2>, <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>; - mediatek,larb = <&larb5>; mediatek,vpu = <&vpu>; clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; clock-names = "venc_lt_sel"; assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC_LT>; }; }; }; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi index 8f7bf33f60..2d7a193272 100644 --- a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -92,7 +92,7 @@ }; &cros_ec { - cros_ec_pwm: ec-pwm { + cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; #pwm-cells = <1>; status = "disabled"; diff --git a/dts/src/arm64/mediatek/mt8183-kukui.dtsi b/dts/src/arm64/mediatek/mt8183-kukui.dtsi index 0f9480f912..8d5bf73a90 100644 --- a/dts/src/arm64/mediatek/mt8183-kukui.dtsi +++ b/dts/src/arm64/mediatek/mt8183-kukui.dtsi @@ -849,7 +849,7 @@ mediatek,pad-select = <0>; status = "okay"; - w25q64dw: spi-flash@0 { + w25q64dw: flash@0 { compatible = "winbond,w25q64dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; diff --git a/dts/src/arm64/mediatek/mt8183-pumpkin.dts b/dts/src/arm64/mediatek/mt8183-pumpkin.dts index ee912825cf..afeb5cd378 100644 --- a/dts/src/arm64/mediatek/mt8183-pumpkin.dts +++ b/dts/src/arm64/mediatek/mt8183-pumpkin.dts @@ -55,7 +55,7 @@ }; }; - ntc { + thermistor { compatible = "murata,ncp03wf104"; pullup-uv = <1800000>; pullup-ohm = <390000>; diff --git a/dts/src/arm64/mediatek/mt8183.dtsi b/dts/src/arm64/mediatek/mt8183.dtsi index 4b08691ed3..01e6502519 100644 --- a/dts/src/arm64/mediatek/mt8183.dtsi +++ b/dts/src/arm64/mediatek/mt8183.dtsi @@ -197,7 +197,7 @@ }; }; - gpu_opp_table: opp_table0 { + gpu_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -682,8 +682,8 @@ compatible = "mediatek,mt8183-m4u"; reg = <0 0x10205000 0 0x1000>; interrupts = ; - mediatek,larbs = <&larb0 &larb1 &larb2 &larb3 - &larb4 &larb5 &larb6>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>, + <&larb4>, <&larb5>, <&larb6>; #iommu-cells = <1>; }; @@ -823,7 +823,7 @@ }; thermal_zones: thermal-zones { - cpu_thermal: cpu_thermal { + cpu_thermal: cpu-thermal { polling-delay-passive = <100>; polling-delay = <500>; thermal-sensors = <&thermal 0>; @@ -1396,7 +1396,6 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_OVL0>; iommus = <&iommu M4U_PORT_DISP_OVL0>; - mediatek,larb = <&larb0>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>; }; @@ -1407,7 +1406,6 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_OVL0_2L>; iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>; - mediatek,larb = <&larb0>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>; }; @@ -1418,7 +1416,6 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_OVL1_2L>; iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>; - mediatek,larb = <&larb0>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>; }; @@ -1429,7 +1426,6 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_RDMA0>; iommus = <&iommu M4U_PORT_DISP_RDMA0>; - mediatek,larb = <&larb0>; mediatek,rdma-fifo-size = <5120>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>; }; @@ -1441,7 +1437,6 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_RDMA1>; iommus = <&iommu M4U_PORT_DISP_RDMA1>; - mediatek,larb = <&larb0>; mediatek,rdma-fifo-size = <2048>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>; }; @@ -1466,8 +1461,7 @@ }; aal0: aal@14010000 { - compatible = "mediatek,mt8183-disp-aal", - "mediatek,mt8173-disp-aal"; + compatible = "mediatek,mt8183-disp-aal"; reg = <0 0x14010000 0 0x1000>; interrupts = ; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; @@ -1598,7 +1592,6 @@ compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc"; reg = <0 0x17030000 0 0x1000>; interrupts = ; - mediatek,larb = <&larb4>; iommus = <&iommu M4U_PORT_JPGENC_RDMA>, <&iommu M4U_PORT_JPGENC_BSDMA>; power-domains = <&spm MT8183_POWER_DOMAIN_VENC>; diff --git a/dts/src/arm64/mediatek/mt8192-evb.dts b/dts/src/arm64/mediatek/mt8192-evb.dts index 0205837fa6..808be492e9 100644 --- a/dts/src/arm64/mediatek/mt8192-evb.dts +++ b/dts/src/arm64/mediatek/mt8192-evb.dts @@ -5,6 +5,7 @@ */ /dts-v1/; #include "mt8192.dtsi" +#include "mt6359.dtsi" / { model = "MediaTek MT8192 evaluation board"; diff --git a/dts/src/arm64/mediatek/mt8192.dtsi b/dts/src/arm64/mediatek/mt8192.dtsi index 411feb2946..733aec2e7f 100644 --- a/dts/src/arm64/mediatek/mt8192.dtsi +++ b/dts/src/arm64/mediatek/mt8192.dtsi @@ -8,7 +8,9 @@ #include #include #include +#include #include +#include #include / { @@ -523,6 +525,33 @@ clock-names = "clk13m"; }; + pwrap: pwrap@10026000 { + compatible = "mediatek,mt6873-pwrap"; + reg = <0 0x10026000 0 0x1000>; + reg-names = "pwrap"; + interrupts = ; + clocks = <&infracfg CLK_INFRA_PMIC_AP>, + <&infracfg CLK_INFRA_PMIC_TMR>; + clock-names = "spi", "wrap"; + assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>; + }; + + spmi: spmi@10027000 { + compatible = "mediatek,mt6873-spmi"; + reg = <0 0x10027000 0 0x000e00>, + <0 0x10029000 0 0x000100>; + reg-names = "pmif", "spmimst"; + clocks = <&infracfg CLK_INFRA_PMIC_AP>, + <&infracfg CLK_INFRA_PMIC_TMR>, + <&topckgen CLK_TOP_SPMI_MST_SEL>; + clock-names = "pmif_sys_ck", + "pmif_tmr_ck", + "spmimst_clk_mux"; + assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>; + }; + scp_adsp: clock-controller@10720000 { compatible = "mediatek,mt8192-scp_adsp"; reg = <0 0x10720000 0 0x1000>; @@ -667,6 +696,205 @@ status = "disabled"; }; + scp: scp@10500000 { + compatible = "mediatek,mt8192-scp"; + reg = <0 0x10500000 0 0x100000>, + <0 0x10720000 0 0xe0000>, + <0 0x10700000 0 0x8000>; + reg-names = "sram", "cfg", "l1tcm"; + interrupts = ; + clocks = <&infracfg CLK_INFRA_SCPSYS>; + clock-names = "main"; + status = "disabled"; + }; + + xhci: usb@11200000 { + compatible = "mediatek,mt8192-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x1000>, + <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts-extended = <&gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "host"; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP_SEL>, + <&topckgen CLK_TOP_SSUSB_XHCI_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&infracfg CLK_INFRA_SSUSB>, + <&infracfg CLK_INFRA_SSUSB_XHCI>, + <&apmixedsys CLK_APMIXED_USBPLL>; + clock-names = "sys_ck", "xhci_ck", "ref_ck"; + wakeup-source; + mediatek,syscon-wakeup = <&pericfg 0x420 102>; + status = "disabled"; + }; + + audsys: syscon@11210000 { + compatible = "mediatek,mt8192-audsys", "syscon"; + reg = <0 0x11210000 0 0x2000>; + #clock-cells = <1>; + + afe: mt8192-afe-pcm { + compatible = "mediatek,mt8192-audio"; + interrupts = ; + resets = <&watchdog 17>; + reset-names = "audiosys"; + mediatek,apmixedsys = <&apmixedsys>; + mediatek,infracfg = <&infracfg>; + mediatek,topckgen = <&topckgen>; + power-domains = <&spm MT8192_POWER_DOMAIN_AUDIO>; + clocks = <&audsys CLK_AUD_AFE>, + <&audsys CLK_AUD_DAC>, + <&audsys CLK_AUD_DAC_PREDIS>, + <&audsys CLK_AUD_ADC>, + <&audsys CLK_AUD_ADDA6_ADC>, + <&audsys CLK_AUD_22M>, + <&audsys CLK_AUD_24M>, + <&audsys CLK_AUD_APLL_TUNER>, + <&audsys CLK_AUD_APLL2_TUNER>, + <&audsys CLK_AUD_TDM>, + <&audsys CLK_AUD_TML>, + <&audsys CLK_AUD_NLE>, + <&audsys CLK_AUD_DAC_HIRES>, + <&audsys CLK_AUD_ADC_HIRES>, + <&audsys CLK_AUD_ADC_HIRES_TML>, + <&audsys CLK_AUD_ADDA6_ADC_HIRES>, + <&audsys CLK_AUD_3RD_DAC>, + <&audsys CLK_AUD_3RD_DAC_PREDIS>, + <&audsys CLK_AUD_3RD_DAC_TML>, + <&audsys CLK_AUD_3RD_DAC_HIRES>, + <&infracfg CLK_INFRA_AUDIO>, + <&infracfg CLK_INFRA_AUDIO_26M_B>, + <&topckgen CLK_TOP_AUDIO_SEL>, + <&topckgen CLK_TOP_AUD_INTBUS_SEL>, + <&topckgen CLK_TOP_MAINPLL_D4_D4>, + <&topckgen CLK_TOP_AUD_1_SEL>, + <&topckgen CLK_TOP_APLL1>, + <&topckgen CLK_TOP_AUD_2_SEL>, + <&topckgen CLK_TOP_APLL2>, + <&topckgen CLK_TOP_AUD_ENGEN1_SEL>, + <&topckgen CLK_TOP_APLL1_D4>, + <&topckgen CLK_TOP_AUD_ENGEN2_SEL>, + <&topckgen CLK_TOP_APLL2_D4>, + <&topckgen CLK_TOP_APLL_I2S0_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S1_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S2_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S3_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S4_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S5_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S6_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S7_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S8_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S9_M_SEL>, + <&topckgen CLK_TOP_APLL12_DIV0>, + <&topckgen CLK_TOP_APLL12_DIV1>, + <&topckgen CLK_TOP_APLL12_DIV2>, + <&topckgen CLK_TOP_APLL12_DIV3>, + <&topckgen CLK_TOP_APLL12_DIV4>, + <&topckgen CLK_TOP_APLL12_DIVB>, + <&topckgen CLK_TOP_APLL12_DIV5>, + <&topckgen CLK_TOP_APLL12_DIV6>, + <&topckgen CLK_TOP_APLL12_DIV7>, + <&topckgen CLK_TOP_APLL12_DIV8>, + <&topckgen CLK_TOP_APLL12_DIV9>, + <&topckgen CLK_TOP_AUDIO_H_SEL>, + <&clk26m>; + clock-names = "aud_afe_clk", + "aud_dac_clk", + "aud_dac_predis_clk", + "aud_adc_clk", + "aud_adda6_adc_clk", + "aud_apll22m_clk", + "aud_apll24m_clk", + "aud_apll1_tuner_clk", + "aud_apll2_tuner_clk", + "aud_tdm_clk", + "aud_tml_clk", + "aud_nle", + "aud_dac_hires_clk", + "aud_adc_hires_clk", + "aud_adc_hires_tml", + "aud_adda6_adc_hires_clk", + "aud_3rd_dac_clk", + "aud_3rd_dac_predis_clk", + "aud_3rd_dac_tml", + "aud_3rd_dac_hires_clk", + "aud_infra_clk", + "aud_infra_26m_clk", + "top_mux_audio", + "top_mux_audio_int", + "top_mainpll_d4_d4", + "top_mux_aud_1", + "top_apll1_ck", + "top_mux_aud_2", + "top_apll2_ck", + "top_mux_aud_eng1", + "top_apll1_d4", + "top_mux_aud_eng2", + "top_apll2_d4", + "top_i2s0_m_sel", + "top_i2s1_m_sel", + "top_i2s2_m_sel", + "top_i2s3_m_sel", + "top_i2s4_m_sel", + "top_i2s5_m_sel", + "top_i2s6_m_sel", + "top_i2s7_m_sel", + "top_i2s8_m_sel", + "top_i2s9_m_sel", + "top_apll12_div0", + "top_apll12_div1", + "top_apll12_div2", + "top_apll12_div3", + "top_apll12_div4", + "top_apll12_divb", + "top_apll12_div5", + "top_apll12_div6", + "top_apll12_div7", + "top_apll12_div8", + "top_apll12_div9", + "top_mux_audio_h", + "top_clk26m_clk"; + }; + }; + + pcie: pcie@11230000 { + compatible = "mediatek,mt8192-pcie"; + device_type = "pci"; + reg = <0 0x11230000 0 0x2000>; + reg-names = "pcie-mac"; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&infracfg CLK_INFRA_PCIE_PL_P_250M>, + <&infracfg CLK_INFRA_PCIE_TL_26M>, + <&infracfg CLK_INFRA_PCIE_TL_96M>, + <&infracfg CLK_INFRA_PCIE_TL_32K>, + <&infracfg CLK_INFRA_PCIE_PERI_26M>, + <&infracfg CLK_INFRA_PCIE_TOP_H_133M>; + clock-names = "pl_250m", "tl_26m", "tl_96m", + "tl_32k", "peri_26m", "top_133m"; + assigned-clocks = <&topckgen CLK_TOP_TL_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D6_D4>; + interrupts = ; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x12000000 0x0 0x12000000 0 0x0800000>, + <0x81000000 0 0x12800000 0x0 0x12800000 0 0x0800000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + nor_flash: spi@11234000 { compatible = "mediatek,mt8192-nor"; reg = <0 0x11234000 0 0xe0>; @@ -679,13 +907,22 @@ assigned-clock-parents = <&clk26m>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; - audsys: clock-controller@11210000 { - compatible = "mediatek,mt8192-audsys", "syscon"; - reg = <0 0x11210000 0 0x1000>; - #clock-cells = <1>; + efuse: efuse@11c10000 { + compatible = "mediatek,efuse"; + reg = <0 0x11c10000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + lvts_e_data1: data1@1c0 { + reg = <0x1c0 0x58>; + }; + + svs_calibration: calib@580 { + reg = <0x580 0x68>; + }; }; i2c3: i2c@11cb0000 { @@ -824,6 +1061,28 @@ #clock-cells = <1>; }; + u3phy0: t-phy@11e40000 { + compatible = "mediatek,mt8192-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11e40000 0x1000>; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + }; + + u3port0: usb-phy@700 { + reg = <0x700 0x900>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + i2c0: i2c@11f00000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11f00000 0 0x1000>, @@ -864,10 +1123,36 @@ #clock-cells = <1>; }; - msdc: clock-controller@11f60000 { - compatible = "mediatek,mt8192-msdc"; - reg = <0 0x11f60000 0 0x1000>; - #clock-cells = <1>; + mmc0: mmc@11f60000 { + compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11f60000 0 0x1000>, <0 0x11f50000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>, + <&msdc_top CLK_MSDC_TOP_H_MST_0P>, + <&msdc_top CLK_MSDC_TOP_SRC_0P>, + <&msdc_top CLK_MSDC_TOP_P_CFG>, + <&msdc_top CLK_MSDC_TOP_P_MSDC0>, + <&msdc_top CLK_MSDC_TOP_AXI>, + <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>; + clock-names = "source", "hclk", "source_cg", "sys_cg", + "pclk_cg", "axi_cg", "ahb_cg"; + status = "disabled"; + }; + + mmc1: mmc@11f70000 { + compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11f70000 0 0x1000>, <0 0x11c70000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>, + <&msdc_top CLK_MSDC_TOP_H_MST_1P>, + <&msdc_top CLK_MSDC_TOP_SRC_1P>, + <&msdc_top CLK_MSDC_TOP_P_CFG>, + <&msdc_top CLK_MSDC_TOP_P_MSDC1>, + <&msdc_top CLK_MSDC_TOP_AXI>, + <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>; + clock-names = "source", "hclk", "source_cg", "sys_cg", + "pclk_cg", "axi_cg", "ahb_cg"; + status = "disabled"; }; mfgcfg: clock-controller@13fbf000 { @@ -882,24 +1167,125 @@ #clock-cells = <1>; }; + smi_common: smi@14002000 { + compatible = "mediatek,mt8192-smi-common"; + reg = <0 0x14002000 0 0x1000>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_INFRA>, + <&mmsys CLK_MM_SMI_GALS>, + <&mmsys CLK_MM_SMI_GALS>; + clock-names = "apb", "smi", "gals0", "gals1"; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + }; + + larb0: larb@14003000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x14003000 0 0x1000>; + mediatek,larb-id = <0>; + mediatek,smi = <&smi_common>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + }; + + larb1: larb@14004000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x14004000 0 0x1000>; + mediatek,larb-id = <1>; + mediatek,smi = <&smi_common>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + }; + + dpi0: dpi@14016000 { + compatible = "mediatek,mt8192-dpi"; + reg = <0 0x14016000 0 0x1000>; + interrupts = ; + clocks = <&mmsys CLK_MM_DPI_DPI0>, + <&mmsys CLK_MM_DISP_DPI0>, + <&apmixedsys CLK_APMIXED_TVDPLL>; + clock-names = "pixel", "engine", "pll"; + status = "disabled"; + }; + + iommu0: m4u@1401d000 { + compatible = "mediatek,mt8192-m4u"; + reg = <0 0x1401d000 0 0x1000>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, + <&larb4>, <&larb5>, <&larb7>, + <&larb9>, <&larb11>, <&larb13>, + <&larb14>, <&larb16>, <&larb17>, + <&larb18>, <&larb19>, <&larb20>; + interrupts = ; + clocks = <&mmsys CLK_MM_SMI_IOMMU>; + clock-names = "bclk"; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + #iommu-cells = <1>; + }; + imgsys: clock-controller@15020000 { compatible = "mediatek,mt8192-imgsys"; reg = <0 0x15020000 0 0x1000>; #clock-cells = <1>; }; + larb9: larb@1502e000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1502e000 0 0x1000>; + mediatek,larb-id = <9>; + mediatek,smi = <&smi_common>; + clocks = <&imgsys CLK_IMG_LARB9>, + <&imgsys CLK_IMG_LARB9>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_ISP>; + }; + imgsys2: clock-controller@15820000 { compatible = "mediatek,mt8192-imgsys2"; reg = <0 0x15820000 0 0x1000>; #clock-cells = <1>; }; + larb11: larb@1582e000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1582e000 0 0x1000>; + mediatek,larb-id = <11>; + mediatek,smi = <&smi_common>; + clocks = <&imgsys2 CLK_IMG2_LARB11>, + <&imgsys2 CLK_IMG2_LARB11>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_ISP2>; + }; + + larb5: larb@1600d000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1600d000 0 0x1000>; + mediatek,larb-id = <5>; + mediatek,smi = <&smi_common>; + clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>, + <&vdecsys_soc CLK_VDEC_SOC_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>; + }; + vdecsys_soc: clock-controller@1600f000 { compatible = "mediatek,mt8192-vdecsys_soc"; reg = <0 0x1600f000 0 0x1000>; #clock-cells = <1>; }; + larb4: larb@1602e000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1602e000 0 0x1000>; + mediatek,larb-id = <4>; + mediatek,smi = <&smi_common>; + clocks = <&vdecsys CLK_VDEC_SOC_LARB1>, + <&vdecsys CLK_VDEC_SOC_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>; + }; + vdecsys: clock-controller@1602f000 { compatible = "mediatek,mt8192-vdecsys"; reg = <0 0x1602f000 0 0x1000>; @@ -912,12 +1298,101 @@ #clock-cells = <1>; }; + larb7: larb@17010000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x17010000 0 0x1000>; + mediatek,larb-id = <7>; + mediatek,smi = <&smi_common>; + clocks = <&vencsys CLK_VENC_SET0_LARB>, + <&vencsys CLK_VENC_SET1_VENC>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_VENC>; + }; + + vcodec_enc: vcodec@17020000 { + compatible = "mediatek,mt8192-vcodec-enc"; + reg = <0 0x17020000 0 0x2000>; + iommus = <&iommu0 M4U_PORT_L7_VENC_RCPU>, + <&iommu0 M4U_PORT_L7_VENC_REC>, + <&iommu0 M4U_PORT_L7_VENC_BSDMA>, + <&iommu0 M4U_PORT_L7_VENC_SV_COMV>, + <&iommu0 M4U_PORT_L7_VENC_RD_COMV>, + <&iommu0 M4U_PORT_L7_VENC_CUR_LUMA>, + <&iommu0 M4U_PORT_L7_VENC_CUR_CHROMA>, + <&iommu0 M4U_PORT_L7_VENC_REF_LUMA>, + <&iommu0 M4U_PORT_L7_VENC_REF_CHROMA>, + <&iommu0 M4U_PORT_L7_VENC_SUB_R_LUMA>, + <&iommu0 M4U_PORT_L7_VENC_SUB_W_LUMA>; + interrupts = ; + mediatek,scp = <&scp>; + power-domains = <&spm MT8192_POWER_DOMAIN_VENC>; + clocks = <&vencsys CLK_VENC_SET1_VENC>; + clock-names = "venc-set1"; + assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>; + }; + camsys: clock-controller@1a000000 { compatible = "mediatek,mt8192-camsys"; reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; }; + larb13: larb@1a001000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1a001000 0 0x1000>; + mediatek,larb-id = <13>; + mediatek,smi = <&smi_common>; + clocks = <&camsys CLK_CAM_CAM>, + <&camsys CLK_CAM_LARB13>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_CAM>; + }; + + larb14: larb@1a002000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1a002000 0 0x1000>; + mediatek,larb-id = <14>; + mediatek,smi = <&smi_common>; + clocks = <&camsys CLK_CAM_CAM>, + <&camsys CLK_CAM_LARB14>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_CAM>; + }; + + larb16: larb@1a00f000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1a00f000 0 0x1000>; + mediatek,larb-id = <16>; + mediatek,smi = <&smi_common>; + clocks = <&camsys_rawa CLK_CAM_RAWA_CAM>, + <&camsys_rawa CLK_CAM_RAWA_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWA>; + }; + + larb17: larb@1a010000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1a010000 0 0x1000>; + mediatek,larb-id = <17>; + mediatek,smi = <&smi_common>; + clocks = <&camsys_rawb CLK_CAM_RAWB_CAM>, + <&camsys_rawb CLK_CAM_RAWB_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWB>; + }; + + larb18: larb@1a011000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1a011000 0 0x1000>; + mediatek,larb-id = <18>; + mediatek,smi = <&smi_common>; + clocks = <&camsys_rawc CLK_CAM_RAWC_LARBX>, + <&camsys_rawc CLK_CAM_RAWC_CAM>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWC>; + }; + camsys_rawa: clock-controller@1a04f000 { compatible = "mediatek,mt8192-camsys_rawa"; reg = <0 0x1a04f000 0 0x1000>; @@ -942,10 +1417,43 @@ #clock-cells = <1>; }; + larb20: larb@1b00f000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1b00f000 0 0x1000>; + mediatek,larb-id = <20>; + mediatek,smi = <&smi_common>; + clocks = <&ipesys CLK_IPE_SMI_SUBCOM>, + <&ipesys CLK_IPE_LARB20>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_IPE>; + }; + + larb19: larb@1b10f000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1b10f000 0 0x1000>; + mediatek,larb-id = <19>; + mediatek,smi = <&smi_common>; + clocks = <&ipesys CLK_IPE_SMI_SUBCOM>, + <&ipesys CLK_IPE_LARB19>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_IPE>; + }; + mdpsys: clock-controller@1f000000 { compatible = "mediatek,mt8192-mdpsys"; reg = <0 0x1f000000 0 0x1000>; #clock-cells = <1>; }; + + larb2: larb@1f002000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1f002000 0 0x1000>; + mediatek,larb-id = <2>; + mediatek,smi = <&smi_common>; + clocks = <&mdpsys CLK_MDP_SMI0>, + <&mdpsys CLK_MDP_SMI0>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_MDP>; + }; }; }; diff --git a/dts/src/arm64/mediatek/mt8195-demo.dts b/dts/src/arm64/mediatek/mt8195-demo.dts new file mode 100644 index 0000000000..4fbd99eb49 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8195-demo.dts @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2022 BayLibre, SAS. + * Author: Fabien Parent + */ +/dts-v1/; + +#include "mt8195.dtsi" +#include "mt6359.dtsi" + +#include +#include +#include +#include + +/ { + model = "MediaTek MT8195 demo board"; + compatible = "mediatek,mt8195-demo", "mediatek,mt8195"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + key-0 { + gpios = <&pio 106 GPIO_ACTIVE_LOW>; + label = "volume_up"; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_reserved: secmon@54600000 { + no-map; + reg = <0 0x54600000 0x0 0x30000>; + }; + + /* 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + }; +}; + +&i2c6 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c6_pins>; + pinctrl-names = "default"; + status = "okay"; + + mt6360: pmic@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + interrupt-controller; + interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "IRQB"; + + charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-compatible = "usb-otg-vbus"; + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; + + regulator { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&mt6360_buck2>; + + mt6360_buck1: buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "mt6360,buck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = ; + regulator-always-on; + }; + + mt6360_buck2: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "mt6360,buck2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = ; + regulator-always-on; + }; + + mt6360_ldo1: ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "mt6360,ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + + mt6360_ldo2: ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "mt6360,ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + + mt6360_ldo3: ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "mt6360,ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + + mt6360_ldo5: ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "mt6360,ldo5"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + + mt6360_ldo6: ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "mt6360,ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = ; + }; + + mt6360_ldo7: ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "mt6360,ldo7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = ; + regulator-always-on; + }; + }; + }; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x14c11>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_default_pins>; + pinctrl-1 = <&mmc1_uhs_pins>; + cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&mt6360_ldo5>; + vqmmc-supply = <&mt6360_ldo3>; + status = "okay"; +}; + +&mt6359_vbbck_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vproc1_buck_reg { + regulator-always-on; +}; + +&mt6359_vproc2_buck_reg { + regulator-always-on; +}; + +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +&mt6359_vsram_md_ldo_reg { + regulator-always-on; +}; + +&mt6359_vsram_others_ldo_reg { + regulator-always-on; +}; + +&pio { + gpio_keys_pins: gpio-keys-pins { + pins { + pinmux = ; + input-enable; + }; + }; + + i2c6_pins: i2c6-pins { + pins { + pinmux = , + ; + bias-pull-up; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-clk { + pinmux = ; + drive-strength = ; + bias-pull-down = ; + }; + + pins-cmd-dat { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + + pins-rst { + pinmux = ; + drive-strength = ; + bias-pull-up = ; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-clk { + pinmux = ; + drive-strength = ; + bias-pull-down = ; + }; + + pins-cmd-dat { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + + pins-ds { + pinmux = ; + drive-strength = ; + bias-pull-down = ; + }; + + pins-rst { + pinmux = ; + drive-strength = ; + bias-pull-up = ; + }; + }; + + mmc1_default_pins: mmc1-default-pins { + pins-clk { + pinmux = ; + drive-strength = ; + bias-pull-down = ; + }; + + pins-cmd-dat { + pinmux = , + , + , + , + ; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + + pins-insert { + pinmux = ; + bias-pull-up; + }; + }; + + mmc1_uhs_pins: mmc1-uhs-pins { + pins-clk { + pinmux = ; + drive-strength = ; + bias-pull-down = ; + }; + + pins-cmd-dat { + pinmux = , + , + , + , + ; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + }; + + uart0_pins: uart0-pins { + pins { + pinmux = , + ; + }; + }; + + uart1_pins: uart1-pins { + pins { + pinmux = , + ; + }; + }; +}; + + +&pmic { + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&u3phy3 { + status = "okay"; +}; + +&xhci0 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&otg_vbus_regulator>; + status = "okay"; +}; + +&xhci1 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&xhci2 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&xhci3 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; diff --git a/dts/src/arm64/mediatek/mt8195-evb.dts b/dts/src/arm64/mediatek/mt8195-evb.dts new file mode 100644 index 0000000000..db25a515e4 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8195-evb.dts @@ -0,0 +1,181 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + * Author: Seiya Wang + */ +/dts-v1/; +#include "mt8195.dtsi" + +/ { + model = "MediaTek MT8195 evaluation board"; + compatible = "mediatek,mt8195-evb", "mediatek,mt8195"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; +}; + +&auxadc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pin>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pin>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pin>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pin>; + clock-frequency = <400000>; + status = "okay"; +}; + +&nor_flash { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&pio { + i2c0_pin: i2c0-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + mediatek,drive-strength-adv = <0>; + drive-strength = <6>; + }; + }; + + i2c1_pin: i2c1-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + mediatek,drive-strength-adv = <0>; + drive-strength = <6>; + }; + }; + + i2c4_pin: i2c4-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + mediatek,drive-strength-adv = <7>; + }; + }; + + i2c6_pin: i2c6-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + }; + }; + + i2c7_pin: i2c7-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + }; + }; + + nor_pins_default: nor-pins { + pins0 { + pinmux = , + , + ; + bias-pull-down; + }; + + pins1 { + pinmux = , + , + ; + bias-pull-up; + }; + }; + + uart0_pin: uart0-pins { + pins { + pinmux = , + ; + }; + }; +}; + +&u3phy0 { + status="okay"; +}; + +&u3phy1 { + status="okay"; +}; + +&u3phy2 { + status="okay"; +}; + +&u3phy3 { + status="okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pin>; + status = "okay"; +}; + +&xhci0 { + status = "okay"; +}; + +&xhci1 { + status = "okay"; +}; + +&xhci2 { + status = "okay"; +}; + +&xhci3 { + /* This controller is connected with a BT device. + * Disable usb2 lpm to prevent known issues. + */ + usb2-lpm-disable; + status = "okay"; +}; diff --git a/dts/src/arm64/mediatek/mt8195.dtsi b/dts/src/arm64/mediatek/mt8195.dtsi new file mode 100644 index 0000000000..b57e620c2c --- /dev/null +++ b/dts/src/arm64/mediatek/mt8195.dtsi @@ -0,0 +1,1045 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2021 MediaTek Inc. + * Author: Seiya Wang + */ + +/dts-v1/; +#include +#include +#include +#include +#include +#include + +/ { + compatible = "mediatek,mt8195"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x000>; + enable-method = "psci"; + clock-frequency = <1701000000>; + capacity-dmips-mhz = <578>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + clock-frequency = <1701000000>; + capacity-dmips-mhz = <578>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x200>; + enable-method = "psci"; + clock-frequency = <1701000000>; + capacity-dmips-mhz = <578>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x300>; + enable-method = "psci"; + clock-frequency = <1701000000>; + capacity-dmips-mhz = <578>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x400>; + enable-method = "psci"; + clock-frequency = <2171000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x500>; + enable-method = "psci"; + clock-frequency = <2171000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x600>; + enable-method = "psci"; + clock-frequency = <2171000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x700>; + enable-method = "psci"; + clock-frequency = <2171000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + + core3 { + cpu = <&cpu7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + cpu_off_l: cpu-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010001>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <95>; + min-residency-us = <580>; + }; + + cpu_off_b: cpu-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010001>; + local-timer-stop; + entry-latency-us = <45>; + exit-latency-us = <140>; + min-residency-us = <740>; + }; + + cluster_off_l: cluster-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010002>; + local-timer-stop; + entry-latency-us = <55>; + exit-latency-us = <155>; + min-residency-us = <840>; + }; + + cluster_off_b: cluster-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010002>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <200>; + min-residency-us = <1000>; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + next-level-cache = <&l3_0>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + next-level-cache = <&l3_0>; + }; + + l3_0: l3-cache { + compatible = "cache"; + }; + }; + + dsu-pmu { + compatible = "arm,dsu-pmu"; + interrupts = ; + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + + clk26m: oscillator-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: oscillator-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupt-parent = <&gic>; + interrupts = ; + }; + + pmu-a78 { + compatible = "arm,cortex-a78-pmu"; + interrupt-parent = <&gic>; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer: timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + #redistributor-regions = <1>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x40000>, + <0 0x0c040000 0 0x200000>; + interrupts = ; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu4 &cpu5 &cpu6 &cpu7>; + }; + }; + }; + + topckgen: syscon@10000000 { + compatible = "mediatek,mt8195-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg_ao: syscon@10001000 { + compatible = "mediatek,mt8195-infracfg_ao", "syscon", "simple-mfd"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + + infracfg_rst: reset-controller { + compatible = "ti,syscon-reset"; + #reset-cells = <1>; + ti,reset-bits = < + 0x140 18 0x144 18 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* pcie */ + 0x120 0 0x124 0 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */ + 0x730 10 0x734 10 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */ + 0x150 5 0x154 5 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* svs gpu */ + >; + }; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt8195-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8195-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11d10000 0 0x1000>, + <0 0x11d30000 0 0x1000>, + <0 0x11d40000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11eb0000 0 0x1000>, + <0 0x11f40000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg_bm", "iocfg_bl", + "iocfg_br", "iocfg_lm", "iocfg_rb", + "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 144>; + interrupt-controller; + interrupts = ; + #interrupt-cells = <2>; + }; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt8195-wdt", + "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x100>; + }; + + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8195-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + + systimer: timer@10017000 { + compatible = "mediatek,mt8195-timer", + "mediatek,mt6765-timer"; + reg = <0 0x10017000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_CLK26M_D2>; + }; + + pwrap: pwrap@10024000 { + compatible = "mediatek,mt8195-pwrap", "syscon"; + reg = <0 0x10024000 0 0x1000>; + reg-names = "pwrap"; + interrupts = ; + clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>, + <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>; + clock-names = "spi", "wrap"; + assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC>; + assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>; + }; + + scp_adsp: clock-controller@10720000 { + compatible = "mediatek,mt8195-scp_adsp"; + reg = <0 0x10720000 0 0x1000>; + #clock-cells = <1>; + }; + + uart0: serial@11001100 { + compatible = "mediatek,mt8195-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11001100 0 0x100>; + interrupts = ; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11001200 { + compatible = "mediatek,mt8195-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11001200 0 0x100>; + interrupts = ; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11001300 { + compatible = "mediatek,mt8195-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11001300 0 0x100>; + interrupts = ; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart3: serial@11001400 { + compatible = "mediatek,mt8195-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11001400 0 0x100>; + interrupts = ; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart4: serial@11001500 { + compatible = "mediatek,mt8195-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11001500 0 0x100>; + interrupts = ; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART4>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart5: serial@11001600 { + compatible = "mediatek,mt8195-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11001600 0 0x100>; + interrupts = ; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART5>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + auxadc: auxadc@11002000 { + compatible = "mediatek,mt8195-auxadc", + "mediatek,mt8173-auxadc"; + reg = <0 0x11002000 0 0x1000>; + clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + pericfg_ao: syscon@11003000 { + compatible = "mediatek,mt8195-pericfg_ao", "syscon"; + reg = <0 0x11003000 0 0x1000>; + #clock-cells = <1>; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt8195-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi1: spi@11010000 { + compatible = "mediatek,mt8195-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11010000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11012000 { + compatible = "mediatek,mt8195-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11012000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi3: spi@11013000 { + compatible = "mediatek,mt8195-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11013000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI3>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi4: spi@11018000 { + compatible = "mediatek,mt8195-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11018000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI4>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi5: spi@11019000 { + compatible = "mediatek,mt8195-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11019000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI5>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spis0: spi@1101d000 { + compatible = "mediatek,mt8195-spi-slave"; + reg = <0 0x1101d000 0 0x1000>; + interrupts = ; + clocks = <&infracfg_ao CLK_INFRA_AO_SPIS0>; + clock-names = "spi"; + assigned-clocks = <&topckgen CLK_TOP_SPIS>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>; + status = "disabled"; + }; + + spis1: spi@1101e000 { + compatible = "mediatek,mt8195-spi-slave"; + reg = <0 0x1101e000 0 0x1000>; + interrupts = ; + clocks = <&infracfg_ao CLK_INFRA_AO_SPIS1>; + clock-names = "spi"; + assigned-clocks = <&topckgen CLK_TOP_SPIS>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>; + status = "disabled"; + }; + + xhci0: usb@11200000 { + compatible = "mediatek,mt8195-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x1000>, + <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = ; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP>, + <&topckgen CLK_TOP_SSUSB_XHCI>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>, + <&topckgen CLK_TOP_SSUSB_REF>, + <&apmixedsys CLK_APMIXED_USB1PLL>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "xhci_ck"; + status = "disabled"; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt8195-mmc", + "mediatek,mt8183-mmc"; + reg = <0 0x11230000 0 0x10000>, + <0 0x11f50000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MSDC50_0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt8195-mmc", + "mediatek,mt8183-mmc"; + reg = <0 0x11240000 0 0x1000>, + <0 0x11c70000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MSDC30_1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>; + clock-names = "source", "hclk", "source_cg"; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + status = "disabled"; + }; + + mmc2: mmc@11250000 { + compatible = "mediatek,mt8195-mmc", + "mediatek,mt8183-mmc"; + reg = <0 0x11250000 0 0x1000>, + <0 0x11e60000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MSDC30_2>, + <&infracfg_ao CLK_INFRA_AO_CG1_MSDC2>, + <&infracfg_ao CLK_INFRA_AO_CG3_MSDC2>; + clock-names = "source", "hclk", "source_cg"; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_2>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + status = "disabled"; + }; + + xhci1: usb@11290000 { + compatible = "mediatek,mt8195-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x11290000 0 0x1000>, + <0 0x11293e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = ; + phys = <&u2port1 PHY_TYPE_USB2>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP_1P>, + <&topckgen CLK_TOP_SSUSB_XHCI_1P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_1P_BUS>, + <&topckgen CLK_TOP_SSUSB_P1_REF>, + <&apmixedsys CLK_APMIXED_USB1PLL>, + <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck","xhci_ck"; + status = "disabled"; + }; + + xhci2: usb@112a0000 { + compatible = "mediatek,mt8195-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x112a0000 0 0x1000>, + <0 0x112a3e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = ; + phys = <&u2port2 PHY_TYPE_USB2>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>, + <&topckgen CLK_TOP_SSUSB_XHCI_2P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>, + <&topckgen CLK_TOP_SSUSB_P2_REF>, + <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>; + clock-names = "sys_ck", "ref_ck", "xhci_ck"; + status = "disabled"; + }; + + xhci3: usb@112b0000 { + compatible = "mediatek,mt8195-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x112b0000 0 0x1000>, + <0 0x112b3e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = ; + phys = <&u2port3 PHY_TYPE_USB2>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>, + <&topckgen CLK_TOP_SSUSB_XHCI_3P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>, + <&topckgen CLK_TOP_SSUSB_P3_REF>, + <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>; + clock-names = "sys_ck", "ref_ck", "xhci_ck"; + status = "disabled"; + }; + + nor_flash: spi@1132c000 { + compatible = "mediatek,mt8195-nor", + "mediatek,mt8173-nor"; + reg = <0 0x1132c000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_SPINOR>, + <&pericfg_ao CLK_PERI_AO_FLASHIF_FLASH>, + <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>; + clock-names = "spi", "sf", "axi"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + u3phy2: t-phy@11c40000 { + compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11c40000 0x700>; + status = "disabled"; + + u2port2: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + + u3phy3: t-phy@11c50000 { + compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11c50000 0x700>; + status = "disabled"; + + u2port3: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + + i2c5: i2c@11d00000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11d00000 0 0x1000>, + <0 0x10220580 0 0x80>; + interrupts = ; + clock-div = <1>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C5>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@11d01000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11d01000 0 0x1000>, + <0 0x10220600 0 0x80>; + interrupts = ; + clock-div = <1>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C6>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@11d02000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11d02000 0 0x1000>, + <0 0x10220680 0 0x80>; + interrupts = ; + clock-div = <1>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C7>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + imp_iic_wrap_s: clock-controller@11d03000 { + compatible = "mediatek,mt8195-imp_iic_wrap_s"; + reg = <0 0x11d03000 0 0x1000>; + #clock-cells = <1>; + }; + + i2c0: i2c@11e00000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11e00000 0 0x1000>, + <0 0x10220080 0 0x80>; + interrupts = ; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C0>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; + + i2c1: i2c@11e01000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11e01000 0 0x1000>, + <0 0x10220200 0 0x80>; + interrupts = ; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C1>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11e02000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11e02000 0 0x1000>, + <0 0x10220380 0 0x80>; + interrupts = ; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C2>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@11e03000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11e03000 0 0x1000>, + <0 0x10220480 0 0x80>; + interrupts = ; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C3>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@11e04000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11e04000 0 0x1000>, + <0 0x10220500 0 0x80>; + interrupts = ; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C4>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + imp_iic_wrap_w: clock-controller@11e05000 { + compatible = "mediatek,mt8195-imp_iic_wrap_w"; + reg = <0 0x11e05000 0 0x1000>; + #clock-cells = <1>; + }; + + u3phy1: t-phy@11e30000 { + compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11e30000 0xe00>; + status = "disabled"; + + u2port1: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>, + <&clk26m>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + + u3port1: usb-phy@700 { + reg = <0x700 0x700>; + clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>, + <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + + u3phy0: t-phy@11e40000 { + compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11e40000 0xe00>; + status = "disabled"; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>, + <&clk26m>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + + u3port0: usb-phy@700 { + reg = <0x700 0x700>; + clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>, + <&topckgen CLK_TOP_SSUSB_PHY_REF>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + + ufsphy: ufs-phy@11fa0000 { + compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy"; + reg = <0 0x11fa0000 0 0xc000>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "unipro", "mp"; + #phy-cells = <0>; + status = "disabled"; + }; + + mfgcfg: clock-controller@13fbf000 { + compatible = "mediatek,mt8195-mfgcfg"; + reg = <0 0x13fbf000 0 0x1000>; + #clock-cells = <1>; + }; + + wpesys: clock-controller@14e00000 { + compatible = "mediatek,mt8195-wpesys"; + reg = <0 0x14e00000 0 0x1000>; + #clock-cells = <1>; + }; + + wpesys_vpp0: clock-controller@14e02000 { + compatible = "mediatek,mt8195-wpesys_vpp0"; + reg = <0 0x14e02000 0 0x1000>; + #clock-cells = <1>; + }; + + wpesys_vpp1: clock-controller@14e03000 { + compatible = "mediatek,mt8195-wpesys_vpp1"; + reg = <0 0x14e03000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: clock-controller@15000000 { + compatible = "mediatek,mt8195-imgsys"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1_dip_top: clock-controller@15110000 { + compatible = "mediatek,mt8195-imgsys1_dip_top"; + reg = <0 0x15110000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1_dip_nr: clock-controller@15130000 { + compatible = "mediatek,mt8195-imgsys1_dip_nr"; + reg = <0 0x15130000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1_wpe: clock-controller@15220000 { + compatible = "mediatek,mt8195-imgsys1_wpe"; + reg = <0 0x15220000 0 0x1000>; + #clock-cells = <1>; + }; + + ipesys: clock-controller@15330000 { + compatible = "mediatek,mt8195-ipesys"; + reg = <0 0x15330000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys: clock-controller@16000000 { + compatible = "mediatek,mt8195-camsys"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawa: clock-controller@1604f000 { + compatible = "mediatek,mt8195-camsys_rawa"; + reg = <0 0x1604f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_yuva: clock-controller@1606f000 { + compatible = "mediatek,mt8195-camsys_yuva"; + reg = <0 0x1606f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawb: clock-controller@1608f000 { + compatible = "mediatek,mt8195-camsys_rawb"; + reg = <0 0x1608f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_yuvb: clock-controller@160af000 { + compatible = "mediatek,mt8195-camsys_yuvb"; + reg = <0 0x160af000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_mraw: clock-controller@16140000 { + compatible = "mediatek,mt8195-camsys_mraw"; + reg = <0 0x16140000 0 0x1000>; + #clock-cells = <1>; + }; + + ccusys: clock-controller@17200000 { + compatible = "mediatek,mt8195-ccusys"; + reg = <0 0x17200000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys_soc: clock-controller@1800f000 { + compatible = "mediatek,mt8195-vdecsys_soc"; + reg = <0 0x1800f000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: clock-controller@1802f000 { + compatible = "mediatek,mt8195-vdecsys"; + reg = <0 0x1802f000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys_core1: clock-controller@1803f000 { + compatible = "mediatek,mt8195-vdecsys_core1"; + reg = <0 0x1803f000 0 0x1000>; + #clock-cells = <1>; + }; + + apusys_pll: clock-controller@190f3000 { + compatible = "mediatek,mt8195-apusys_pll"; + reg = <0 0x190f3000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@1a000000 { + compatible = "mediatek,mt8195-vencsys"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys_core1: clock-controller@1b000000 { + compatible = "mediatek,mt8195-vencsys_core1"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + }; + }; +}; diff --git a/dts/src/arm64/mediatek/pumpkin-common.dtsi b/dts/src/arm64/mediatek/pumpkin-common.dtsi index fcddec1473..7a717f9269 100644 --- a/dts/src/arm64/mediatek/pumpkin-common.dtsi +++ b/dts/src/arm64/mediatek/pumpkin-common.dtsi @@ -25,7 +25,6 @@ gpio-keys { compatible = "gpio-keys"; - input-name = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_default>; diff --git a/dts/src/arm64/microchip/sparx5_nand.dtsi b/dts/src/arm64/microchip/sparx5_nand.dtsi index 03f107e427..ce0747fd64 100644 --- a/dts/src/arm64/microchip/sparx5_nand.dtsi +++ b/dts/src/arm64/microchip/sparx5_nand.dtsi @@ -19,7 +19,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <14>; /* CS14 */ - spi-flash@6 { + flash@6 { compatible = "spi-nand"; pinctrl-0 = <&cs14_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm64/microchip/sparx5_pcb125.dts b/dts/src/arm64/microchip/sparx5_pcb125.dts index 9baa085d78..dbf8c1d48a 100644 --- a/dts/src/arm64/microchip/sparx5_pcb125.dts +++ b/dts/src/arm64/microchip/sparx5_pcb125.dts @@ -47,7 +47,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; /* CS0 */ - spi-flash@9 { + flash@9 { compatible = "jedec,spi-nor"; spi-max-frequency = <8000000>; reg = <0x9>; /* SPI */ @@ -59,7 +59,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; /* CS1 */ - spi-flash@9 { + flash@9 { compatible = "spi-nand"; pinctrl-0 = <&cs1_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm64/microchip/sparx5_pcb134_board.dtsi b/dts/src/arm64/microchip/sparx5_pcb134_board.dtsi index 33faf1f326..699256f1b9 100644 --- a/dts/src/arm64/microchip/sparx5_pcb134_board.dtsi +++ b/dts/src/arm64/microchip/sparx5_pcb134_board.dtsi @@ -274,7 +274,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <8000000>; reg = <0>; @@ -289,7 +289,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; /* CS0 */ - spi-flash@9 { + flash@9 { compatible = "jedec,spi-nor"; spi-max-frequency = <8000000>; reg = <0x9>; /* SPI */ diff --git a/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi b/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi index ef96e6d8c6..d10a9172b5 100644 --- a/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi +++ b/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi @@ -89,7 +89,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <8000000>; reg = <0>; @@ -104,7 +104,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; /* CS0 */ - spi-flash@9 { + flash@9 { compatible = "jedec,spi-nor"; spi-max-frequency = <8000000>; reg = <0x9>; /* SPI */ diff --git a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts index c4dee05f33..70737a09a9 100644 --- a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts +++ b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts @@ -811,6 +811,110 @@ remote-endpoint = <&mixer_out5_ep>; }; }; + + xbar_asrc_in1_port: port@63 { + reg = <0x63>; + + xbar_asrc_in1_ep: endpoint { + remote-endpoint = <&asrc_in1_ep>; + }; + }; + + port@64 { + reg = <0x64>; + + xbar_asrc_out1_ep: endpoint { + remote-endpoint = <&asrc_out1_ep>; + }; + }; + + xbar_asrc_in2_port: port@65 { + reg = <0x65>; + + xbar_asrc_in2_ep: endpoint { + remote-endpoint = <&asrc_in2_ep>; + }; + }; + + port@66 { + reg = <0x66>; + + xbar_asrc_out2_ep: endpoint { + remote-endpoint = <&asrc_out2_ep>; + }; + }; + + xbar_asrc_in3_port: port@67 { + reg = <0x67>; + + xbar_asrc_in3_ep: endpoint { + remote-endpoint = <&asrc_in3_ep>; + }; + }; + + port@68 { + reg = <0x68>; + + xbar_asrc_out3_ep: endpoint { + remote-endpoint = <&asrc_out3_ep>; + }; + }; + + xbar_asrc_in4_port: port@69 { + reg = <0x69>; + + xbar_asrc_in4_ep: endpoint { + remote-endpoint = <&asrc_in4_ep>; + }; + }; + + port@6a { + reg = <0x6a>; + + xbar_asrc_out4_ep: endpoint { + remote-endpoint = <&asrc_out4_ep>; + }; + }; + + xbar_asrc_in5_port: port@6b { + reg = <0x6b>; + + xbar_asrc_in5_ep: endpoint { + remote-endpoint = <&asrc_in5_ep>; + }; + }; + + port@6c { + reg = <0x6c>; + + xbar_asrc_out5_ep: endpoint { + remote-endpoint = <&asrc_out5_ep>; + }; + }; + + xbar_asrc_in6_port: port@6d { + reg = <0x6d>; + + xbar_asrc_in6_ep: endpoint { + remote-endpoint = <&asrc_in6_ep>; + }; + }; + + port@6e { + reg = <0x6e>; + + xbar_asrc_out6_ep: endpoint { + remote-endpoint = <&asrc_out6_ep>; + }; + }; + + xbar_asrc_in7_port: port@6f { + reg = <0x6f>; + + xbar_asrc_in7_ep: endpoint { + remote-endpoint = <&asrc_in7_ep>; + }; + }; }; admaif@290f000 { @@ -1935,6 +2039,119 @@ }; }; }; + + asrc@2910000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + asrc_in1_ep: endpoint { + remote-endpoint = <&xbar_asrc_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + asrc_in2_ep: endpoint { + remote-endpoint = <&xbar_asrc_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + asrc_in3_ep: endpoint { + remote-endpoint = <&xbar_asrc_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + asrc_in4_ep: endpoint { + remote-endpoint = <&xbar_asrc_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + asrc_in5_ep: endpoint { + remote-endpoint = <&xbar_asrc_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + asrc_in6_ep: endpoint { + remote-endpoint = <&xbar_asrc_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + asrc_in7_ep: endpoint { + remote-endpoint = <&xbar_asrc_in7_ep>; + }; + }; + + asrc_out1_port: port@7 { + reg = <0x7>; + + asrc_out1_ep: endpoint { + remote-endpoint = <&xbar_asrc_out1_ep>; + }; + }; + + asrc_out2_port: port@8 { + reg = <0x8>; + + asrc_out2_ep: endpoint { + remote-endpoint = <&xbar_asrc_out2_ep>; + }; + }; + + asrc_out3_port: port@9 { + reg = <0x9>; + + asrc_out3_ep: endpoint { + remote-endpoint = <&xbar_asrc_out3_ep>; + }; + }; + + asrc_out4_port: port@a { + reg = <0xa>; + + asrc_out4_ep: endpoint { + remote-endpoint = <&xbar_asrc_out4_ep>; + }; + }; + + asrc_out5_port: port@b { + reg = <0xb>; + + asrc_out5_ep: endpoint { + remote-endpoint = <&xbar_asrc_out5_ep>; + }; + }; + + asrc_out6_port: port@c { + reg = <0xc>; + + asrc_out6_ep: endpoint { + remote-endpoint = <&xbar_asrc_out6_ep>; + }; + }; + }; + }; }; }; @@ -2331,6 +2548,10 @@ <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>, + <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, + <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, + <&xbar_asrc_in7_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2348,6 +2569,8 @@ <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>, <&mixer_out4_port>, <&mixer_out5_port>, + <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, + <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, /* I/O */ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, <&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>, diff --git a/dts/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts b/dts/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts index 4631504c3c..7e9aad9ff1 100644 --- a/dts/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts +++ b/dts/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts @@ -349,7 +349,7 @@ status = "okay"; }; - fan: fan { + fan: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm4 0 45334>; diff --git a/dts/src/arm64/nvidia/tegra186.dtsi b/dts/src/arm64/nvidia/tegra186.dtsi index e9b40f5d79..0e9afc3e2f 100644 --- a/dts/src/arm64/nvidia/tegra186.dtsi +++ b/dts/src/arm64/nvidia/tegra186.dtsi @@ -516,12 +516,25 @@ sound-name-prefix = "MIXER1"; status = "disabled"; }; + + tegra_asrc: asrc@2910000 { + compatible = "nvidia,tegra186-asrc"; + reg = <0x2910000 0x2000>; + sound-name-prefix = "ASRC1"; + status = "disabled"; + }; }; }; mc: memory-controller@2c00000 { compatible = "nvidia,tegra186-mc"; - reg = <0x0 0x02c00000 0x0 0xb0000>; + reg = <0x0 0x02c00000 0x0 0x10000>, /* MC-SID */ + <0x0 0x02c10000 0x0 0x10000>, /* Broadcast channel */ + <0x0 0x02c20000 0x0 0x10000>, /* MC0 */ + <0x0 0x02c30000 0x0 0x10000>, /* MC1 */ + <0x0 0x02c40000 0x0 0x10000>, /* MC2 */ + <0x0 0x02c50000 0x0 0x10000>; /* MC3 */ + reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3"; interrupts = ; status = "disabled"; diff --git a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts index 2478ece9e6..bce518ace6 100644 --- a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts +++ b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts @@ -764,6 +764,110 @@ remote-endpoint = <&mixer_out5_ep>; }; }; + + xbar_asrc_in1_port: port@63 { + reg = <0x63>; + + xbar_asrc_in1_ep: endpoint { + remote-endpoint = <&asrc_in1_ep>; + }; + }; + + port@64 { + reg = <0x64>; + + xbar_asrc_out1_ep: endpoint { + remote-endpoint = <&asrc_out1_ep>; + }; + }; + + xbar_asrc_in2_port: port@65 { + reg = <0x65>; + + xbar_asrc_in2_ep: endpoint { + remote-endpoint = <&asrc_in2_ep>; + }; + }; + + port@66 { + reg = <0x66>; + + xbar_asrc_out2_ep: endpoint { + remote-endpoint = <&asrc_out2_ep>; + }; + }; + + xbar_asrc_in3_port: port@67 { + reg = <0x67>; + + xbar_asrc_in3_ep: endpoint { + remote-endpoint = <&asrc_in3_ep>; + }; + }; + + port@68 { + reg = <0x68>; + + xbar_asrc_out3_ep: endpoint { + remote-endpoint = <&asrc_out3_ep>; + }; + }; + + xbar_asrc_in4_port: port@69 { + reg = <0x69>; + + xbar_asrc_in4_ep: endpoint { + remote-endpoint = <&asrc_in4_ep>; + }; + }; + + port@6a { + reg = <0x6a>; + + xbar_asrc_out4_ep: endpoint { + remote-endpoint = <&asrc_out4_ep>; + }; + }; + + xbar_asrc_in5_port: port@6b { + reg = <0x6b>; + + xbar_asrc_in5_ep: endpoint { + remote-endpoint = <&asrc_in5_ep>; + }; + }; + + port@6c { + reg = <0x6c>; + + xbar_asrc_out5_ep: endpoint { + remote-endpoint = <&asrc_out5_ep>; + }; + }; + + xbar_asrc_in6_port: port@6d { + reg = <0x6d>; + + xbar_asrc_in6_ep: endpoint { + remote-endpoint = <&asrc_in6_ep>; + }; + }; + + port@6e { + reg = <0x6e>; + + xbar_asrc_out6_ep: endpoint { + remote-endpoint = <&asrc_out6_ep>; + }; + }; + + xbar_asrc_in7_port: port@6f { + reg = <0x6f>; + + xbar_asrc_in7_ep: endpoint { + remote-endpoint = <&asrc_in7_ep>; + }; + }; }; admaif@290f000 { @@ -1734,6 +1838,119 @@ }; }; }; + + asrc@2910000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + asrc_in1_ep: endpoint { + remote-endpoint = <&xbar_asrc_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + asrc_in2_ep: endpoint { + remote-endpoint = <&xbar_asrc_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + asrc_in3_ep: endpoint { + remote-endpoint = <&xbar_asrc_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + asrc_in4_ep: endpoint { + remote-endpoint = <&xbar_asrc_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + asrc_in5_ep: endpoint { + remote-endpoint = <&xbar_asrc_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + asrc_in6_ep: endpoint { + remote-endpoint = <&xbar_asrc_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + asrc_in7_ep: endpoint { + remote-endpoint = <&xbar_asrc_in7_ep>; + }; + }; + + asrc_out1_port: port@7 { + reg = <0x7>; + + asrc_out1_ep: endpoint { + remote-endpoint = <&xbar_asrc_out1_ep>; + }; + }; + + asrc_out2_port: port@8 { + reg = <0x8>; + + asrc_out2_ep: endpoint { + remote-endpoint = <&xbar_asrc_out2_ep>; + }; + }; + + asrc_out3_port: port@9 { + reg = <0x9>; + + asrc_out3_ep: endpoint { + remote-endpoint = <&xbar_asrc_out3_ep>; + }; + }; + + asrc_out4_port: port@a { + reg = <0xa>; + + asrc_out4_ep: endpoint { + remote-endpoint = <&xbar_asrc_out4_ep>; + }; + }; + + asrc_out5_port: port@b { + reg = <0xb>; + + asrc_out5_ep: endpoint { + remote-endpoint = <&xbar_asrc_out5_ep>; + }; + }; + + asrc_out6_port: port@c { + reg = <0xc>; + + asrc_out6_ep: endpoint { + remote-endpoint = <&xbar_asrc_out6_ep>; + }; + }; + }; + }; }; }; @@ -1989,7 +2206,7 @@ "p2u-5", "p2u-6", "p2u-7"; }; - fan: fan { + fan: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm4 0 45334>; @@ -2052,6 +2269,10 @@ <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>, + <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, + <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, + <&xbar_asrc_in7_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2068,6 +2289,8 @@ <&adx4_out3_port>, <&adx4_out4_port>, <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>, <&mixer_out4_port>, <&mixer_out5_port>, + <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, + <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, /* BE I/O Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, <&dmic3_port>; diff --git a/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi b/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi index 32ce7904f4..7acc32dd29 100644 --- a/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi +++ b/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi @@ -774,6 +774,110 @@ remote-endpoint = <&mixer_out5_ep>; }; }; + + xbar_asrc_in1_port: port@63 { + reg = <0x63>; + + xbar_asrc_in1_ep: endpoint { + remote-endpoint = <&asrc_in1_ep>; + }; + }; + + port@64 { + reg = <0x64>; + + xbar_asrc_out1_ep: endpoint { + remote-endpoint = <&asrc_out1_ep>; + }; + }; + + xbar_asrc_in2_port: port@65 { + reg = <0x65>; + + xbar_asrc_in2_ep: endpoint { + remote-endpoint = <&asrc_in2_ep>; + }; + }; + + port@66 { + reg = <0x66>; + + xbar_asrc_out2_ep: endpoint { + remote-endpoint = <&asrc_out2_ep>; + }; + }; + + xbar_asrc_in3_port: port@67 { + reg = <0x67>; + + xbar_asrc_in3_ep: endpoint { + remote-endpoint = <&asrc_in3_ep>; + }; + }; + + port@68 { + reg = <0x68>; + + xbar_asrc_out3_ep: endpoint { + remote-endpoint = <&asrc_out3_ep>; + }; + }; + + xbar_asrc_in4_port: port@69 { + reg = <0x69>; + + xbar_asrc_in4_ep: endpoint { + remote-endpoint = <&asrc_in4_ep>; + }; + }; + + port@6a { + reg = <0x6a>; + + xbar_asrc_out4_ep: endpoint { + remote-endpoint = <&asrc_out4_ep>; + }; + }; + + xbar_asrc_in5_port: port@6b { + reg = <0x6b>; + + xbar_asrc_in5_ep: endpoint { + remote-endpoint = <&asrc_in5_ep>; + }; + }; + + port@6c { + reg = <0x6c>; + + xbar_asrc_out5_ep: endpoint { + remote-endpoint = <&asrc_out5_ep>; + }; + }; + + xbar_asrc_in6_port: port@6d { + reg = <0x6d>; + + xbar_asrc_in6_ep: endpoint { + remote-endpoint = <&asrc_in6_ep>; + }; + }; + + port@6e { + reg = <0x6e>; + + xbar_asrc_out6_ep: endpoint { + remote-endpoint = <&asrc_out6_ep>; + }; + }; + + xbar_asrc_in7_port: port@6f { + reg = <0x6f>; + + xbar_asrc_in7_ep: endpoint { + remote-endpoint = <&asrc_in7_ep>; + }; + }; }; admaif@290f000 { @@ -1794,6 +1898,119 @@ }; }; }; + + asrc@2910000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + asrc_in1_ep: endpoint { + remote-endpoint = <&xbar_asrc_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + asrc_in2_ep: endpoint { + remote-endpoint = <&xbar_asrc_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + asrc_in3_ep: endpoint { + remote-endpoint = <&xbar_asrc_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + asrc_in4_ep: endpoint { + remote-endpoint = <&xbar_asrc_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + asrc_in5_ep: endpoint { + remote-endpoint = <&xbar_asrc_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + asrc_in6_ep: endpoint { + remote-endpoint = <&xbar_asrc_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + asrc_in7_ep: endpoint { + remote-endpoint = <&xbar_asrc_in7_ep>; + }; + }; + + asrc_out1_port: port@7 { + reg = <0x7>; + + asrc_out1_ep: endpoint { + remote-endpoint = <&xbar_asrc_out1_ep>; + }; + }; + + asrc_out2_port: port@8 { + reg = <0x8>; + + asrc_out2_ep: endpoint { + remote-endpoint = <&xbar_asrc_out2_ep>; + }; + }; + + asrc_out3_port: port@9 { + reg = <0x9>; + + asrc_out3_ep: endpoint { + remote-endpoint = <&xbar_asrc_out3_ep>; + }; + }; + + asrc_out4_port: port@a { + reg = <0xa>; + + asrc_out4_ep: endpoint { + remote-endpoint = <&xbar_asrc_out4_ep>; + }; + }; + + asrc_out5_port: port@b { + reg = <0xb>; + + asrc_out5_ep: endpoint { + remote-endpoint = <&xbar_asrc_out5_ep>; + }; + }; + + asrc_out6_port: port@c { + reg = <0xc>; + + asrc_out6_ep: endpoint { + remote-endpoint = <&xbar_asrc_out6_ep>; + }; + }; + }; + }; }; }; @@ -1993,7 +2210,7 @@ "p2u-5", "p2u-6", "p2u-7"; }; - fan: fan { + fan: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm6 0 45334>; @@ -2102,6 +2319,10 @@ <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>, + <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, + <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, + <&xbar_asrc_in7_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2119,6 +2340,8 @@ <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>, <&mixer_out4_port>, <&mixer_out5_port>, + <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, + <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, /* BE I/O Ports */ <&i2s3_port>, <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic4_port>, diff --git a/dts/src/arm64/nvidia/tegra194.dtsi b/dts/src/arm64/nvidia/tegra194.dtsi index 751ebe5e95..d1f8248c00 100644 --- a/dts/src/arm64/nvidia/tegra194.dtsi +++ b/dts/src/arm64/nvidia/tegra194.dtsi @@ -569,6 +569,14 @@ sound-name-prefix = "MIXER1"; status = "disabled"; }; + + tegra_asrc: asrc@2910000 { + compatible = "nvidia,tegra194-asrc", + "nvidia,tegra186-asrc"; + reg = <0x2910000 0x2000>; + sound-name-prefix = "ASRC1"; + status = "disabled"; + }; }; }; @@ -604,9 +612,27 @@ mc: memory-controller@2c00000 { compatible = "nvidia,tegra194-mc"; - reg = <0x02c00000 0x100000>, - <0x02b80000 0x040000>, - <0x01700000 0x100000>; + reg = <0x02c00000 0x10000>, /* MC-SID */ + <0x02c10000 0x10000>, /* MC Broadcast*/ + <0x02c20000 0x10000>, /* MC0 */ + <0x02c30000 0x10000>, /* MC1 */ + <0x02c40000 0x10000>, /* MC2 */ + <0x02c50000 0x10000>, /* MC3 */ + <0x02b80000 0x10000>, /* MC4 */ + <0x02b90000 0x10000>, /* MC5 */ + <0x02ba0000 0x10000>, /* MC6 */ + <0x02bb0000 0x10000>, /* MC7 */ + <0x01700000 0x10000>, /* MC8 */ + <0x01710000 0x10000>, /* MC9 */ + <0x01720000 0x10000>, /* MC10 */ + <0x01730000 0x10000>, /* MC11 */ + <0x01740000 0x10000>, /* MC12 */ + <0x01750000 0x10000>, /* MC13 */ + <0x01760000 0x10000>, /* MC14 */ + <0x01770000 0x10000>; /* MC15 */ + reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", + "ch11", "ch12", "ch13", "ch14", "ch15"; interrupts = ; #interconnect-cells = <1>; status = "disabled"; @@ -934,6 +960,11 @@ clocks = <&bpmp TEGRA194_CLK_SDMMC1>, <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>; clock-names = "sdhci", "tmclk"; + assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC1>, + <&bpmp TEGRA194_CLK_PLLC4_MUXED>; + assigned-clock-parents = + <&bpmp TEGRA194_CLK_PLLC4_MUXED>, + <&bpmp TEGRA194_CLK_PLLC4_VCO_DIV2>; resets = <&bpmp TEGRA194_RESET_SDMMC1>; reset-names = "sdhci"; interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>, @@ -968,6 +999,11 @@ clocks = <&bpmp TEGRA194_CLK_SDMMC3>, <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>; clock-names = "sdhci", "tmclk"; + assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC3>, + <&bpmp TEGRA194_CLK_PLLC4_MUXED>; + assigned-clock-parents = + <&bpmp TEGRA194_CLK_PLLC4_MUXED>, + <&bpmp TEGRA194_CLK_PLLC4_VCO_DIV2>; resets = <&bpmp TEGRA194_RESET_SDMMC3>; reset-names = "sdhci"; interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>, diff --git a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts index 72c2dc3c14..746bd52ea3 100644 --- a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts +++ b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts @@ -1657,7 +1657,7 @@ }; }; - fan: fan { + fan: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 3 45334>; diff --git a/dts/src/arm64/nvidia/tegra210.dtsi b/dts/src/arm64/nvidia/tegra210.dtsi index 218a2b3220..4f0e51f1a3 100644 --- a/dts/src/arm64/nvidia/tegra210.dtsi +++ b/dts/src/arm64/nvidia/tegra210.dtsi @@ -1366,8 +1366,9 @@ <&tegra_car TEGRA210_CLK_DFLL_REF>, <&tegra_car TEGRA210_CLK_I2C5>; clock-names = "soc", "ref", "i2c"; - resets = <&tegra_car TEGRA210_RST_DFLL_DVCO>; - reset-names = "dvco"; + resets = <&tegra_car TEGRA210_RST_DFLL_DVCO>, + <&tegra_car 155>; + reset-names = "dvco", "dfll"; #clock-cells = <0>; clock-output-names = "dfllCPU_out"; status = "disabled"; diff --git a/dts/src/arm64/nvidia/tegra234-p3701-0000.dtsi b/dts/src/arm64/nvidia/tegra234-p3701-0000.dtsi index d95a542c0b..798de9226b 100644 --- a/dts/src/arm64/nvidia/tegra234-p3701-0000.dtsi +++ b/dts/src/arm64/nvidia/tegra234-p3701-0000.dtsi @@ -7,6 +7,18 @@ compatible = "nvidia,p3701-0000", "nvidia,tegra234"; bus@0 { + spi@3270000 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <102000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + }; + mmc@3460000 { status = "okay"; bus-width = <8>; diff --git a/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts b/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts index 34d6a01ee1..eaf1994abb 100644 --- a/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -763,6 +763,110 @@ remote-endpoint = <&mix_out5>; }; }; + + xbar_asrc_in1_port: port@63 { + reg = <0x63>; + + xbar_asrc_in1_ep: endpoint { + remote-endpoint = <&asrc_in1_ep>; + }; + }; + + port@64 { + reg = <0x64>; + + xbar_asrc_out1_ep: endpoint { + remote-endpoint = <&asrc_out1_ep>; + }; + }; + + xbar_asrc_in2_port: port@65 { + reg = <0x65>; + + xbar_asrc_in2_ep: endpoint { + remote-endpoint = <&asrc_in2_ep>; + }; + }; + + port@66 { + reg = <0x66>; + + xbar_asrc_out2_ep: endpoint { + remote-endpoint = <&asrc_out2_ep>; + }; + }; + + xbar_asrc_in3_port: port@67 { + reg = <0x67>; + + xbar_asrc_in3_ep: endpoint { + remote-endpoint = <&asrc_in3_ep>; + }; + }; + + port@68 { + reg = <0x68>; + + xbar_asrc_out3_ep: endpoint { + remote-endpoint = <&asrc_out3_ep>; + }; + }; + + xbar_asrc_in4_port: port@69 { + reg = <0x69>; + + xbar_asrc_in4_ep: endpoint { + remote-endpoint = <&asrc_in4_ep>; + }; + }; + + port@6a { + reg = <0x6a>; + + xbar_asrc_out4_ep: endpoint { + remote-endpoint = <&asrc_out4_ep>; + }; + }; + + xbar_asrc_in5_port: port@6b { + reg = <0x6b>; + + xbar_asrc_in5_ep: endpoint { + remote-endpoint = <&asrc_in5_ep>; + }; + }; + + port@6c { + reg = <0x6c>; + + xbar_asrc_out5_ep: endpoint { + remote-endpoint = <&asrc_out5_ep>; + }; + }; + + xbar_asrc_in6_port: port@6d { + reg = <0x6d>; + + xbar_asrc_in6_ep: endpoint { + remote-endpoint = <&asrc_in6_ep>; + }; + }; + + port@6e { + reg = <0x6e>; + + xbar_asrc_out6_ep: endpoint { + remote-endpoint = <&asrc_out6_ep>; + }; + }; + + xbar_asrc_in7_port: port@6f { + reg = <0x6f>; + + xbar_asrc_in7_ep: endpoint { + remote-endpoint = <&asrc_in7_ep>; + }; + }; }; i2s@2901000 { @@ -1733,6 +1837,119 @@ }; }; }; + + asrc@2910000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + asrc_in1_ep: endpoint { + remote-endpoint = <&xbar_asrc_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + asrc_in2_ep: endpoint { + remote-endpoint = <&xbar_asrc_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + asrc_in3_ep: endpoint { + remote-endpoint = <&xbar_asrc_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + asrc_in4_ep: endpoint { + remote-endpoint = <&xbar_asrc_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + asrc_in5_ep: endpoint { + remote-endpoint = <&xbar_asrc_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + asrc_in6_ep: endpoint { + remote-endpoint = <&xbar_asrc_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + asrc_in7_ep: endpoint { + remote-endpoint = <&xbar_asrc_in7_ep>; + }; + }; + + asrc_out1_port: port@7 { + reg = <0x7>; + + asrc_out1_ep: endpoint { + remote-endpoint = <&xbar_asrc_out1_ep>; + }; + }; + + asrc_out2_port: port@8 { + reg = <0x8>; + + asrc_out2_ep: endpoint { + remote-endpoint = <&xbar_asrc_out2_ep>; + }; + }; + + asrc_out3_port: port@9 { + reg = <0x9>; + + asrc_out3_ep: endpoint { + remote-endpoint = <&xbar_asrc_out3_ep>; + }; + }; + + asrc_out4_port: port@a { + reg = <0xa>; + + asrc_out4_ep: endpoint { + remote-endpoint = <&xbar_asrc_out4_ep>; + }; + }; + + asrc_out5_port: port@b { + reg = <0xb>; + + asrc_out5_ep: endpoint { + remote-endpoint = <&xbar_asrc_out5_ep>; + }; + }; + + asrc_out6_port: port@c { + reg = <0xc>; + + asrc_out6_ep: endpoint { + remote-endpoint = <&xbar_asrc_out6_ep>; + }; + }; + }; + }; }; dma-controller@2930000 { @@ -1823,6 +2040,10 @@ <&xbar_mix_in5_port>, <&xbar_mix_in6_port>, <&xbar_mix_in7_port>, <&xbar_mix_in8_port>, <&xbar_mix_in9_port>, <&xbar_mix_in10_port>, + <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>, + <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, + <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, + <&xbar_asrc_in7_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -1839,6 +2060,8 @@ <&adx4_out3_port>, <&adx4_out4_port>, <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>, <&mix_out4_port>, <&mix_out5_port>, + <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, + <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, /* BE I/O Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, <&dmic3_port>; diff --git a/dts/src/arm64/nvidia/tegra234.dtsi b/dts/src/arm64/nvidia/tegra234.dtsi index aaace605bd..cb3af539e4 100644 --- a/dts/src/arm64/nvidia/tegra234.dtsi +++ b/dts/src/arm64/nvidia/tegra234.dtsi @@ -378,6 +378,14 @@ iommus = <&smmu_niso0 TEGRA234_SID_APE>; status = "disabled"; }; + + tegra_asrc: asrc@2910000 { + compatible = "nvidia,tegra234-asrc", + "nvidia,tegra186-asrc"; + reg = <0x2910000 0x2000>; + sound-name-prefix = "ASRC1"; + status = "disabled"; + }; }; adma: dma-controller@2930000 { @@ -507,9 +515,27 @@ mc: memory-controller@2c00000 { compatible = "nvidia,tegra234-mc"; - reg = <0x02c00000 0x100000>, - <0x02b80000 0x040000>, - <0x01700000 0x100000>; + reg = <0x02c00000 0x10000>, /* MC-SID */ + <0x02c10000 0x10000>, /* MC Broadcast*/ + <0x02c20000 0x10000>, /* MC0 */ + <0x02c30000 0x10000>, /* MC1 */ + <0x02c40000 0x10000>, /* MC2 */ + <0x02c50000 0x10000>, /* MC3 */ + <0x02b80000 0x10000>, /* MC4 */ + <0x02b90000 0x10000>, /* MC5 */ + <0x02ba0000 0x10000>, /* MC6 */ + <0x02bb0000 0x10000>, /* MC7 */ + <0x01700000 0x10000>, /* MC8 */ + <0x01710000 0x10000>, /* MC9 */ + <0x01720000 0x10000>, /* MC10 */ + <0x01730000 0x10000>, /* MC11 */ + <0x01740000 0x10000>, /* MC12 */ + <0x01750000 0x10000>, /* MC13 */ + <0x01760000 0x10000>, /* MC14 */ + <0x01770000 0x10000>; /* MC15 */ + reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", + "ch11", "ch12", "ch13", "ch14", "ch15"; interrupts = ; #interconnect-cells = <1>; status = "okay"; @@ -654,6 +680,20 @@ reset-names = "i2c"; }; + spi@3270000 { + compatible = "nvidia,tegra234-qspi"; + reg = <0x3270000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA234_CLK_QSPI0_2X_PM>, + <&bpmp TEGRA234_CLK_QSPI0_PM>; + clock-names = "qspi", "qspi_out"; + resets = <&bpmp TEGRA234_RESET_QSPI0>; + reset-names = "qspi"; + status = "disabled"; + }; + pwm1: pwm@3280000 { compatible = "nvidia,tegra194-pwm", "nvidia,tegra186-pwm"; @@ -666,6 +706,20 @@ #pwm-cells = <2>; }; + spi@3300000 { + compatible = "nvidia,tegra234-qspi"; + reg = <0x3300000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA234_CLK_QSPI1_2X_PM>, + <&bpmp TEGRA234_CLK_QSPI1_PM>; + clock-names = "qspi", "qspi_out"; + resets = <&bpmp TEGRA234_RESET_QSPI1>; + reset-names = "qspi"; + status = "disabled"; + }; + mmc@3460000 { compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci"; reg = <0x03460000 0x20000>; @@ -1258,6 +1312,13 @@ }; }; + ccplex@e000000 { + compatible = "nvidia,tegra234-ccplex-cluster"; + reg = <0x0 0x0e000000 0x0 0x5ffff>; + nvidia,bpmp = <&bpmp>; + status = "okay"; + }; + sram@40000000 { compatible = "nvidia,tegra234-sysram", "mmio-sram"; reg = <0x0 0x40000000 0x0 0x80000>; diff --git a/dts/src/arm64/qcom/apq8096-db820c.dts b/dts/src/arm64/qcom/apq8096-db820c.dts index f623db8451..49afbb1a06 100644 --- a/dts/src/arm64/qcom/apq8096-db820c.dts +++ b/dts/src/arm64/qcom/apq8096-db820c.dts @@ -258,6 +258,12 @@ vdd-gfx-supply = <&vdd_gfx>; }; +&mss_pil { + status = "okay"; + pll-supply = <&vreg_l12a_1p8>; + firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn"; +}; + &pm8994_resin { status = "okay"; linux,code = ; @@ -1046,22 +1052,22 @@ &usb2 { status = "okay"; extcon = <&usb2_id>; +}; - dwc3@7600000 { - extcon = <&usb2_id>; - dr_mode = "otg"; - maximum-speed = "high-speed"; - }; +&usb2_dwc3 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; }; &usb3 { status = "okay"; extcon = <&usb3_id>; +}; - dwc3@6a00000 { - extcon = <&usb3_id>; - dr_mode = "otg"; - }; +&usb3_dwc3 { + extcon = <&usb3_id>; + dr_mode = "otg"; }; &usb3phy { diff --git a/dts/src/arm64/qcom/ipq6018-cp01-c1.dts b/dts/src/arm64/qcom/ipq6018-cp01-c1.dts index 5aec183087..821cb7c0c1 100644 --- a/dts/src/arm64/qcom/ipq6018-cp01-c1.dts +++ b/dts/src/arm64/qcom/ipq6018-cp01-c1.dts @@ -39,7 +39,7 @@ cs-select = <0>; status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; diff --git a/dts/src/arm64/qcom/ipq6018.dtsi b/dts/src/arm64/qcom/ipq6018.dtsi index aac56575e3..c89499e366 100644 --- a/dts/src/arm64/qcom/ipq6018.dtsi +++ b/dts/src/arm64/qcom/ipq6018.dtsi @@ -318,12 +318,12 @@ #size-cells = <0>; reg = <0x0 0x078b6000 0x0 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; - dmas = <&blsp_dma 15>, <&blsp_dma 14>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -333,12 +333,12 @@ #size-cells = <0>; reg = <0x0 0x078b7000 0x0 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; - dmas = <&blsp_dma 17>, <&blsp_dma 16>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -630,6 +630,16 @@ }; }; + mdio: mdio@90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio"; + reg = <0x0 0x90000 0x0 0x64>; + clocks = <&gcc GCC_MDIO_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + status = "disabled"; + }; + qusb_phy_1: qusb@59000 { compatible = "qcom,ipq6018-qusb2-phy"; reg = <0x0 0x059000 0x0 0x180>; @@ -643,7 +653,7 @@ status = "disabled"; }; - usb2: usb2@7000000 { + usb2: usb@70f8800 { compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; reg = <0x0 0x070F8800 0x0 0x400>; #address-cells = <2>; @@ -652,7 +662,7 @@ clocks = <&gcc GCC_USB1_MASTER_CLK>, <&gcc GCC_USB1_SLEEP_CLK>, <&gcc GCC_USB1_MOCK_UTMI_CLK>; - clock-names = "master", + clock-names = "core", "sleep", "mock_utmi"; @@ -683,7 +693,6 @@ reg = <0x0 0x78000 0x0 0x1C4>; #address-cells = <2>; #size-cells = <2>; - #clock-cells = <1>; ranges; clocks = <&gcc GCC_USB0_AUX_CLK>, @@ -695,12 +704,13 @@ reset-names = "phy","common"; status = "disabled"; - usb0_ssphy: lane@78200 { + usb0_ssphy: phy@78200 { reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ <0x0 0x00078400 0x0 0x200>, /* Rx */ <0x0 0x00078800 0x0 0x1F8>, /* PCS */ <0x0 0x00078600 0x0 0x044>; /* PCS misc */ #phy-cells = <0>; + #clock-cells = <1>; clocks = <&gcc GCC_USB0_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb0_pipe_clk_src"; @@ -720,7 +730,7 @@ status = "disabled"; }; - usb3: usb3@8A00000 { + usb3: usb@8af8800 { compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; reg = <0x0 0x8AF8800 0x0 0x400>; #address-cells = <2>; @@ -731,8 +741,8 @@ <&gcc GCC_USB0_MASTER_CLK>, <&gcc GCC_USB0_SLEEP_CLK>, <&gcc GCC_USB0_MOCK_UTMI_CLK>; - clock-names = "sys_noc_axi", - "master", + clock-names = "cfg_noc", + "core", "sleep", "mock_utmi"; @@ -746,7 +756,7 @@ resets = <&gcc GCC_USB0_BCR>; status = "disabled"; - dwc_0: usb@8A00000 { + dwc_0: usb@8a00000 { compatible = "snps,dwc3"; reg = <0x0 0x8A00000 0x0 0xcd00>; interrupts = ; diff --git a/dts/src/arm64/qcom/ipq8074-hk01.dts b/dts/src/arm64/qcom/ipq8074-hk01.dts index b5e1eaa367..de20cb98ac 100644 --- a/dts/src/arm64/qcom/ipq8074-hk01.dts +++ b/dts/src/arm64/qcom/ipq8074-hk01.dts @@ -35,7 +35,7 @@ &blsp1_spi1 { status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm64/qcom/ipq8074-hk10.dtsi b/dts/src/arm64/qcom/ipq8074-hk10.dtsi index 07e6708296..ce86d9b10d 100644 --- a/dts/src/arm64/qcom/ipq8074-hk10.dtsi +++ b/dts/src/arm64/qcom/ipq8074-hk10.dtsi @@ -29,7 +29,7 @@ &blsp1_spi1 { status = "ok"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm64/qcom/ipq8074.dtsi b/dts/src/arm64/qcom/ipq8074.dtsi index d80b1cefab..4c38b15c6f 100644 --- a/dts/src/arm64/qcom/ipq8074.dtsi +++ b/dts/src/arm64/qcom/ipq8074.dtsi @@ -13,7 +13,7 @@ clocks { sleep_clk: sleep_clk { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32768>; #clock-cells = <0>; }; @@ -467,12 +467,12 @@ #size-cells = <0>; reg = <0x078b6000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; - dmas = <&blsp_dma 15>, <&blsp_dma 14>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; status = "disabled"; @@ -484,12 +484,12 @@ #size-cells = <0>; reg = <0x078b7000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <100000>; - dmas = <&blsp_dma 17>, <&blsp_dma 16>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -499,12 +499,12 @@ #size-cells = <0>; reg = <0x78b9000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; - dmas = <&blsp_dma 21>, <&blsp_dma 20>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -514,12 +514,12 @@ #size-cells = <0>; reg = <0x078ba000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <100000>; - dmas = <&blsp_dma 23>, <&blsp_dma 22>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 22>, <&blsp_dma 23>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -553,7 +553,7 @@ }; usb_0: usb@8af8800 { - compatible = "qcom,dwc3"; + compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; reg = <0x08af8800 0x400>; #address-cells = <1>; #size-cells = <1>; @@ -563,8 +563,8 @@ <&gcc GCC_USB0_MASTER_CLK>, <&gcc GCC_USB0_SLEEP_CLK>, <&gcc GCC_USB0_MOCK_UTMI_CLK>; - clock-names = "sys_noc_axi", - "master", + clock-names = "cfg_noc", + "core", "sleep", "mock_utmi"; @@ -578,7 +578,7 @@ resets = <&gcc GCC_USB0_BCR>; status = "disabled"; - dwc_0: dwc3@8a00000 { + dwc_0: usb@8a00000 { compatible = "snps,dwc3"; reg = <0x8a00000 0xcd00>; interrupts = ; @@ -593,7 +593,7 @@ }; usb_1: usb@8cf8800 { - compatible = "qcom,dwc3"; + compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; reg = <0x08cf8800 0x400>; #address-cells = <1>; #size-cells = <1>; @@ -603,8 +603,8 @@ <&gcc GCC_USB1_MASTER_CLK>, <&gcc GCC_USB1_SLEEP_CLK>, <&gcc GCC_USB1_MOCK_UTMI_CLK>; - clock-names = "sys_noc_axi", - "master", + clock-names = "cfg_noc", + "core", "sleep", "mock_utmi"; @@ -618,7 +618,7 @@ resets = <&gcc GCC_USB1_BCR>; status = "disabled"; - dwc_1: dwc3@8c00000 { + dwc_1: usb@8c00000 { compatible = "snps,dwc3"; reg = <0x8c00000 0xcd00>; interrupts = ; diff --git a/dts/src/arm64/qcom/msm8916-huawei-g7.dts b/dts/src/arm64/qcom/msm8916-huawei-g7.dts index 42d93d3fba..00488afb41 100644 --- a/dts/src/arm64/qcom/msm8916-huawei-g7.dts +++ b/dts/src/arm64/qcom/msm8916-huawei-g7.dts @@ -8,18 +8,14 @@ #include #include #include +#include /* * Note: The original firmware from Huawei can only boot 32-bit kernels. - * To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware - * with EDL, e.g. taken from the DragonBoard 410c. This works because Huawei - * forgot to set up (firmware) secure boot for some reason. - * - * Also note that Huawei no longer provides bootloader unlock codes. - * This can be bypassed by patching the bootloader from a custom HYP firmware, - * making it think the bootloader is unlocked. - * - * See: https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7) + * To boot this device tree using arm64 it is necessary to flash 64-bit TZ/HYP + * firmware (e.g. taken from the DragonBoard 410c). + * See https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7) + * for suggested installation instructions. */ / { @@ -216,6 +212,10 @@ status = "okay"; }; +&lpass { + status = "okay"; +}; + &pm8916_resin { status = "okay"; linux,code = ; @@ -260,6 +260,40 @@ cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>; }; +&sound { + status = "okay"; + + model = "msm8916"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS External2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + primary-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + tertiary-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; @@ -269,6 +303,13 @@ extcon = <&usb_id>; }; +&wcd_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi index e34963505e..05472510e2 100644 --- a/dts/src/arm64/qcom/msm8916.dtsi +++ b/dts/src/arm64/qcom/msm8916.dtsi @@ -299,7 +299,7 @@ qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8916"; + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -1314,6 +1314,20 @@ #interrupt-cells = <4>; }; + bam_dmux_dma: dma-controller@4044000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x04044000 0x19000>; + interrupts = ; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + + status = "disabled"; + }; + mpss: remoteproc@4080000 { compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil"; reg = <0x04080000 0x100>, @@ -1357,6 +1371,22 @@ memory-region = <&mpss_mem>; }; + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&hexagon_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + + status = "disabled"; + }; + smd-edge { interrupts = ; @@ -1485,8 +1515,8 @@ interrupts = ; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 1>, <&blsp_dma 0>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp1_uart1_default>; pinctrl-1 = <&blsp1_uart1_sleep>; @@ -1499,8 +1529,8 @@ interrupts = ; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 3>, <&blsp_dma 2>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp1_uart2_default>; pinctrl-1 = <&blsp1_uart2_sleep>; @@ -1511,9 +1541,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b5000 0x500>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_default>; pinctrl-1 = <&i2c1_sleep>; @@ -1529,8 +1559,8 @@ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 5>, <&blsp_dma 4>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi1_default>; pinctrl-1 = <&spi1_sleep>; @@ -1543,9 +1573,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b6000 0x500>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_default>; pinctrl-1 = <&i2c2_sleep>; @@ -1561,8 +1591,8 @@ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 7>, <&blsp_dma 6>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi2_default>; pinctrl-1 = <&spi2_sleep>; @@ -1575,9 +1605,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b7000 0x500>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c3_default>; pinctrl-1 = <&i2c3_sleep>; @@ -1593,8 +1623,8 @@ clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 9>, <&blsp_dma 8>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi3_default>; pinctrl-1 = <&spi3_sleep>; @@ -1607,9 +1637,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b8000 0x500>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_default>; pinctrl-1 = <&i2c4_sleep>; @@ -1625,8 +1655,8 @@ clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 11>, <&blsp_dma 10>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi4_default>; pinctrl-1 = <&spi4_sleep>; @@ -1639,9 +1669,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b9000 0x500>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c5_default>; pinctrl-1 = <&i2c5_sleep>; @@ -1657,8 +1687,8 @@ clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 13>, <&blsp_dma 12>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi5_default>; pinctrl-1 = <&spi5_sleep>; @@ -1671,9 +1701,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078ba000 0x500>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c6_default>; pinctrl-1 = <&i2c6_sleep>; @@ -1689,8 +1719,8 @@ clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 15>, <&blsp_dma 14>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi6_default>; pinctrl-1 = <&spi6_sleep>; @@ -1788,7 +1818,7 @@ qcom,mmio = <&pronto>; - bt { + bluetooth { compatible = "qcom,wcnss-bt"; }; diff --git a/dts/src/arm64/qcom/msm8953.dtsi b/dts/src/arm64/qcom/msm8953.dtsi index 431228faac..ffc3ec2cd3 100644 --- a/dts/src/arm64/qcom/msm8953.dtsi +++ b/dts/src/arm64/qcom/msm8953.dtsi @@ -321,12 +321,12 @@ qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm_requests: rpm_requests { + rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8953"; qcom,smd-channels = "rpm_requests"; rpmcc: rpmcc { - compatible = "qcom,rpmcc-msm8953"; + compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc"; clocks = <&xo_board>; clock-names = "xo"; #clock-cells = <1>; @@ -759,10 +759,13 @@ clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_PCNOC_USB3_AXI_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", - "mock_utmi", "sleep"; + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; @@ -923,9 +926,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b5000 0x600>; interrupts = ; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_1_default>; @@ -941,9 +944,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b6000 0x600>; interrupts = ; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_2_default>; @@ -959,9 +962,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b7000 0x600>; interrupts = ; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_3_default>; pinctrl-1 = <&i2c_3_sleep>; @@ -976,9 +979,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b8000 0x600>; interrupts = ; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_4_default>; pinctrl-1 = <&i2c_4_sleep>; @@ -993,9 +996,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x7af5000 0x600>; interrupts = ; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_5_default>; pinctrl-1 = <&i2c_5_sleep>; @@ -1010,9 +1013,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x7af6000 0x600>; interrupts = ; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_6_default>; pinctrl-1 = <&i2c_6_sleep>; @@ -1027,9 +1030,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x7af7000 0x600>; interrupts = ; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_7_default>; pinctrl-1 = <&i2c_7_sleep>; @@ -1044,9 +1047,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x7af8000 0x600>; interrupts = ; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_8_default>; pinctrl-1 = <&i2c_8_sleep>; diff --git a/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts index 84558ab5fe..7748b745a5 100644 --- a/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts +++ b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts @@ -23,20 +23,31 @@ /* This enables graphical output via bootloader-enabled display */ chosen { - bootargs = "earlycon=tty0 console=tty0"; + bootargs = "earlycon=tty0 console=tty0 maxcpus=1"; #address-cells = <2>; #size-cells = <2>; ranges; - framebuffer0: framebuffer@3404000 { - status= "okay"; + framebuffer0: framebuffer@3400000 { compatible = "simple-framebuffer"; - reg = <0 0x3404000 0 (1080 * 1920 * 3)>; + reg = <0 0x3400000 0 (1080 * 1920 * 3)>; width = <1080>; height = <1920>; stride = <(1080 * 3)>; format = "r8g8b8"; + /* + * That's a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet.. + */ + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + power-domains = <&mmcc MDSS_GDSC>; }; }; @@ -126,6 +137,23 @@ no-map; }; +&pm8994_spmi_regulators { + VDD_APC0: s8 { + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1180000>; + regulator-always-on; + regulator-boot-on; + }; + + /* APC1 is 3-phase, but quoting downstream, s11 is "the gang leader" */ + VDD_APC1: s11 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; +}; + &rpm_requests { pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; diff --git a/dts/src/arm64/qcom/msm8992.dtsi b/dts/src/arm64/qcom/msm8992.dtsi index 58fe58cc77..750643763a 100644 --- a/dts/src/arm64/qcom/msm8992.dtsi +++ b/dts/src/arm64/qcom/msm8992.dtsi @@ -10,8 +10,30 @@ /delete-node/ &cpu6_map; /delete-node/ &cpu7_map; +&gcc { + compatible = "qcom,gcc-msm8992"; +}; + +&mmcc { + compatible = "qcom,mmcc-msm8992"; + + assigned-clock-rates = <800000000>, + <808000000>, + <1020000000>, + <960000000>, + <800000000>; +}; + +&ocmem { + reg = <0xfdd00000 0x2000>, <0xfec00000 0x100000>; + + gmu-sram@0 { + reg = <0x0 0x80000>; + }; +}; + &rpmcc { - compatible = "qcom,rpmcc-msm8992"; + compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc"; }; &tcsr_mutex { diff --git a/dts/src/arm64/qcom/msm8994-huawei-angler-rev-101.dts b/dts/src/arm64/qcom/msm8994-huawei-angler-rev-101.dts index 0e3dd48f0d..dbfbb77e9f 100644 --- a/dts/src/arm64/qcom/msm8994-huawei-angler-rev-101.dts +++ b/dts/src/arm64/qcom/msm8994-huawei-angler-rev-101.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* Copyright (c) 2015, Huawei Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. - * Copyright (c) 2021, Petr Vorel + * Copyright (c) 2021-2022, Petr Vorel */ /dts-v1/; @@ -27,17 +27,20 @@ chosen { stdout-path = "serial0:115200n8"; }; +}; - soc { - serial@f991e000 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - }; - }; +&blsp1_uart2 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; }; &tlmm { gpio-reserved-ranges = <85 4>; }; + +&sdhc1 { + status = "okay"; + mmc-hs400-1_8v; +}; diff --git a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi index dde7ed159c..e5a45af0bd 100644 --- a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -108,13 +108,6 @@ /* NXP PN547 NFC */ }; -&blsp1_i2c4 { - status = "okay"; - clock-frequency = <355000>; - - /* Empty but active */ -}; - &blsp1_i2c6 { status = "okay"; clock-frequency = <355000>; @@ -194,26 +187,38 @@ }; &rpm_requests { + /* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */ + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; + pm8994_regulators: pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; vdd_s3-supply = <&vph_pwr>; vdd_s4-supply = <&vph_pwr>; vdd_s5-supply = <&vph_pwr>; vdd_s6-supply = <&vph_pwr>; vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; vdd_l1-supply = <&pmi8994_s1>; vdd_l2_l26_l28-supply = <&pm8994_s3>; vdd_l3_l11-supply = <&pm8994_s3>; vdd_l4_l27_l31-supply = <&pm8994_s3>; - vdd_l5_l7-supply = <&pm8994_s5>; vdd_l6_l12_l32-supply = <&pm8994_s5>; vdd_l8_l16_l30-supply = <&vph_pwr>; vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>; @@ -234,9 +239,9 @@ pm8994_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-system-load = <325000>; regulator-allow-set-load; regulator-always-on; - regulator-system-load = <325000>; }; pm8994_s5: s5 { @@ -262,13 +267,14 @@ pm8994_l2: l2 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <1250000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l3: l3 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; + regulator-boot-on; }; pm8994_l4: l4 { @@ -308,8 +314,8 @@ pm8994_l12: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l13: l13 { @@ -320,8 +326,9 @@ pm8994_l14: l14 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; + regulator-boot-on; }; pm8994_l15: l15 { @@ -337,44 +344,47 @@ pm8994_l17: l17 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; + regulator-boot-on; }; pm8994_l18: l18 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; + regulator-boot-on; }; pm8994_l19: l19 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; + regulator-boot-on; }; pm8994_l20: l20 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; - regulator-always-on; - regulator-boot-on; - regulator-allow-set-load; regulator-system-load = <570000>; + regulator-allow-set-load; }; pm8994_l21: l21 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; - regulator-always-on; - regulator-allow-set-load; regulator-system-load = <800000>; + regulator-allow-set-load; }; pm8994_l22: l22 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; + regulator-boot-on; }; pm8994_l23: l23 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; }; pm8994_l24: l24 { @@ -385,6 +395,7 @@ pm8994_l25: l25 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-boot-on; }; pm8994_l26: l26 { @@ -395,30 +406,33 @@ pm8994_l27: l27 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-boot-on; }; pm8994_l28: l28 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l29: l29 { regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2700000>; + regulator-boot-on; }; pm8994_l30: l30 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; }; pm8994_l31: l31 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l32: l32 { @@ -426,26 +440,11 @@ regulator-max-microvolt = <1800000>; }; - pm8994_lvs1: lvs1 {}; - pm8994_lvs2: lvs2 {}; - }; - - pmi8994_regulators: pmi8994-regulators { - compatible = "qcom,rpm-pmi8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_bst_byp-supply = <&vph_pwr>; - - pmi8994_s1: s1 { - regulator-min-microvolt = <1025000>; - regulator-max-microvolt = <1025000>; + pm8994_lvs1: lvs1 { + regulator-boot-on; }; - - /* S2 & S3 - VDD_GFX */ - - pmi8994_bby: boost-bypass { - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3600000>; + pm8994_lvs2: lvs2 { + regulator-boot-on; }; }; }; diff --git a/dts/src/arm64/qcom/msm8994.dtsi b/dts/src/arm64/qcom/msm8994.dtsi index 8c1dc5155b..0318d42c57 100644 --- a/dts/src/arm64/qcom/msm8994.dtsi +++ b/dts/src/arm64/qcom/msm8994.dtsi @@ -4,6 +4,8 @@ #include #include +#include +#include #include / { @@ -12,6 +14,11 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + mmc1 = &sdhc1; + mmc2 = &sdhc2; + }; + chosen { }; clocks { @@ -183,8 +190,8 @@ no-map; }; - cont_splash_mem: memory@3800000 { - reg = <0 0x03800000 0 0x2400000>; + cont_splash_mem: memory@3401000 { + reg = <0 0x03401000 0 0x2200000>; no-map; }; @@ -233,7 +240,6 @@ interrupts = ; qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - qcom,local-pid = <0>; qcom,remote-pid = <6>; rpm_requests: rpm-requests { @@ -241,7 +247,7 @@ qcom,smd-channels = "rpm_requests"; rpmcc: rpmcc { - compatible = "qcom,rpmcc-msm8994"; + compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -354,6 +360,15 @@ #mbox-cells = <1>; }; + watchdog@f9017000 { + compatible = "qcom,apss-wdt-msm8994", "qcom,kpss-wdt"; + reg = <0xf9017000 0x1000>; + interrupts = , + ; + clocks = <&sleep_clk>; + timeout-sec = <10>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -413,7 +428,7 @@ }; usb3: usb@f92f8800 { - compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + compatible = "qcom,msm8994-dwc3", "qcom,dwc3"; reg = <0xf92f8800 0x400>; #address-cells = <1>; #size-cells = <1>; @@ -423,7 +438,10 @@ <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, <&gcc GCC_USB30_SLEEP_CLK>, <&gcc GCC_USB30_MOCK_UTMI_CLK>; - clock-names = "core", "iface", "sleep", "mock_utmi", "ref", "xo"; + clock-names = "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; @@ -498,7 +516,7 @@ #dma-cells = <1>; qcom,ee = <0>; qcom,controlled-remotely; - num-channels = <18>; + num-channels = <24>; qcom,num-ees = <4>; }; @@ -519,9 +537,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9923000 0x500>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; dma-names = "tx", "rx"; @@ -555,9 +573,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9924000 0x500>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; dma-names = "tx", "rx"; @@ -575,9 +593,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9926000 0x500>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp1_dma 18>, <&blsp1_dma 19>; dma-names = "tx", "rx"; @@ -593,9 +611,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9927000 0x500>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; dma-names = "tx", "rx"; @@ -611,9 +629,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9928000 0x500>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; dma-names = "tx", "rx"; @@ -634,7 +652,7 @@ #dma-cells = <1>; qcom,ee = <0>; qcom,controlled-remotely; - num-channels = <18>; + num-channels = <24>; qcom,num-ees = <4>; }; @@ -657,9 +675,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9963000 0x500>; interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; dma-names = "tx", "rx"; @@ -693,9 +711,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9967000 0x500>; interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <355000>; dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; dma-names = "tx", "rx"; @@ -714,7 +732,7 @@ #power-domain-cells = <1>; reg = <0xfc400000 0x2000>; - clock-names = "xo", "sleep_clk"; + clock-names = "xo", "sleep"; clocks = <&xo_board>, <&sleep_clk>; }; @@ -1012,6 +1030,61 @@ drive-strength = <2>; }; }; + + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8994"; + reg = <0xfd8c0000 0x5200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + clock-names = "xo", + "gpll0", + "mmssnoc_ahb", + "oxili_gfx3d_clk_src", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "hdmipll"; + clocks = <&xo_board>, + <&gcc GPLL0_OUT_MMSSCC>, + <&rpmcc RPM_SMD_MMSSNOC_AHB_CLK>, + <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, + <0>, + <0>, + <0>, + <0>, + <0>; + + assigned-clocks = <&mmcc MMPLL0_PLL>, + <&mmcc MMPLL1_PLL>, + <&mmcc MMPLL3_PLL>, + <&mmcc MMPLL4_PLL>, + <&mmcc MMPLL5_PLL>; + assigned-clock-rates = <800000000>, + <1167000000>, + <1020000000>, + <960000000>, + <600000000>; + }; + + ocmem: ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x200000>; + reg-names = "ctrl", "mem"; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x180000>; + }; + }; }; timer: timer { diff --git a/dts/src/arm64/qcom/msm8996-mtp.dts b/dts/src/arm64/qcom/msm8996-mtp.dts index 6a1699a96c..596ad4c896 100644 --- a/dts/src/arm64/qcom/msm8996-mtp.dts +++ b/dts/src/arm64/qcom/msm8996-mtp.dts @@ -18,12 +18,10 @@ chosen { stdout-path = "serial0"; }; +}; - soc { - serial@75b0000 { - status = "okay"; - }; - }; +&blsp2_uart2 { + status = "okay"; }; &hdmi { diff --git a/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi b/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi index 3bb50cecd6..ca3c633f5a 100644 --- a/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi +++ b/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi @@ -13,9 +13,10 @@ #include #include -/delete-node/ &slpi_region; -/delete-node/ &venus_region; -/delete-node/ &zap_shader_region; +/delete-node/ &adsp_mem; +/delete-node/ &slpi_mem; +/delete-node/ &venus_mem; +/delete-node/ &gpu_mem; / { qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */ @@ -46,18 +47,23 @@ no-map; }; - zap_shader_region: gpu@90400000 { + adsp_mem: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1a00000>; + no-map; + }; + + gpu_mem: gpu@90400000 { compatible = "shared-dma-pool"; reg = <0x0 0x90400000 0x0 0x2000>; no-map; }; - slpi_region: memory@90500000 { + slpi_mem: memory@90500000 { reg = <0 0x90500000 0 0xa00000>; no-map; }; - venus_region: memory@90f00000 { + venus_mem: memory@90f00000 { reg = <0 0x90f00000 0 0x500000>; no-map; }; diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi b/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi index 7a9fcbe9bb..a7090befc1 100644 --- a/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi +++ b/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi @@ -66,32 +66,32 @@ /* This platform has all PIL regions offset by 0x1400000 */ /delete-node/ mpss@88800000; - mpss_region: mpss@89c00000 { + mpss_mem: mpss@89c00000 { reg = <0x0 0x89c00000 0x0 0x6200000>; no-map; }; /delete-node/ adsp@8ea00000; - adsp_region: adsp@8ea00000 { + adsp_mem: adsp@8fe00000 { reg = <0x0 0x8fe00000 0x0 0x1b00000>; no-map; }; - /delete-node/ slpi@90b00000; - slpi_region: slpi@91900000 { + /delete-node/ slpi@90500000; + slpi_mem: slpi@91900000 { reg = <0x0 0x91900000 0x0 0xa00000>; no-map; }; - /delete-node/ gpu@8f200000; - zap_shader_region: gpu@92300000 { + /delete-node/ gpu@90f00000; + gpu_mem: gpu@92300000 { compatible = "shared-dma-pool"; reg = <0x0 0x92300000 0x0 0x2000>; no-map; }; /delete-node/ venus@91000000; - venus_region: venus@90400000 { + venus_mem: venus@92400000 { reg = <0x0 0x92400000 0x0 0x500000>; no-map; }; @@ -107,7 +107,7 @@ pmsg-size = <0x40000>; }; - /delete-node/ rmtfs@86700000; + /delete-node/ rmtfs; rmtfs@f6c00000 { compatible = "qcom,rmtfs-mem"; reg = <0 0xf6c00000 0 0x200000>; @@ -118,7 +118,7 @@ }; /delete-node/ mba@91500000; - mba_region: mba@f6f00000 { + mba_mem: mba@f6f00000 { reg = <0x0 0xf6f00000 0x0 0x100000>; no-map; }; @@ -267,6 +267,12 @@ vdd-gfx-supply = <&vdd_gfx>; }; +&mss_pil { + status = "okay"; + + pll-supply = <&vreg_l12a_1p8>; +}; + &pcie0 { status = "okay"; @@ -291,24 +297,30 @@ linux,code = ; }; +&slpi_pil { + status = "okay"; + + px-supply = <&vreg_lvs2a_1p8>; +}; + &usb3 { status = "okay"; extcon = <&typec>; qcom,select-utmi-as-pipe-clk; +}; - dwc3@6a00000 { - extcon = <&typec>; +&usb3_dwc3 { + extcon = <&typec>; - /* usb3-phy is not used on this device */ - phys = <&hsusb_phy1>; - phy-names = "usb2-phy"; + /* usb3-phy is not used on this device */ + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; - maximum-speed = "high-speed"; - snps,is-utmi-l1-suspend; - snps,usb2-gadget-lpm-disable; - snps,hird-threshold = /bits/ 8 <0>; - }; + maximum-speed = "high-speed"; + snps,is-utmi-l1-suspend; + snps,usb2-gadget-lpm-disable; + snps,hird-threshold = /bits/ 8 <0>; }; &hsusb_phy1 { @@ -336,13 +348,7 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - - vdda-phy-max-microamp = <18380>; - vdda-pll-max-microamp = <9440>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; }; &venus { diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts b/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts index 34f82e06ef..22978d06f8 100644 --- a/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts +++ b/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts @@ -130,6 +130,11 @@ status = "okay"; }; +&mss_pil { + firmware-name = "qcom/msm8996/gemini/mba.mbn", + "qcom/msm8996/gemini/modem.mbn"; +}; + &q6asmdai { dai@0 { reg = <0>; @@ -144,6 +149,10 @@ }; }; +&slpi_pil { + firmware-name = "qcom/msm8996/gemini/slpi.mbn"; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "gemini"; diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts b/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts index 27a45ddbb5..1e2dd6763a 100644 --- a/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts +++ b/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts @@ -111,6 +111,11 @@ status = "disabled"; }; +&mss_pil { + firmware-name = "qcom/msm8996/scorpio/mba.mbn", + "qcom/msm8996/scorpio/modem.mbn"; +}; + &q6asmdai { dai@0 { reg = <0>; @@ -125,6 +130,10 @@ }; }; +&slpi_pil { + firmware-name = "qcom/msm8996/scorpio/slpi.mbn"; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "scorpio"; diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi index b9a48cfd76..9932186f7c 100644 --- a/dts/src/arm64/qcom/msm8996.dtsi +++ b/dts/src/arm64/qcom/msm8996.dtsi @@ -384,60 +384,65 @@ #size-cells = <2>; ranges; - mba_region: mba@91500000 { - reg = <0x0 0x91500000 0x0 0x200000>; + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x600000>; no-map; }; - slpi_region: slpi@90b00000 { - reg = <0x0 0x90b00000 0x0 0xa00000>; + xbl_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x200000>; no-map; }; - venus_region: venus@90400000 { - reg = <0x0 0x90400000 0x0 0x700000>; + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; no-map; }; - adsp_region: adsp@8ea00000 { - reg = <0x0 0x8ea00000 0x0 0x1a00000>; + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2600000>; no-map; }; - mpss_region: mpss@88800000 { - reg = <0x0 0x88800000 0x0 0x6200000>; + rmtfs_mem: rmtfs { + compatible = "qcom,rmtfs-mem"; + + size = <0x0 0x200000>; + alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; }; - smem_mem: smem-mem@86000000 { - reg = <0x0 0x86000000 0x0 0x200000>; + mpss_mem: mpss@88800000 { + reg = <0x0 0x88800000 0x0 0x6200000>; no-map; }; - memory@85800000 { - reg = <0x0 0x85800000 0x0 0x800000>; + adsp_mem: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1b00000>; no-map; }; - memory@86200000 { - reg = <0x0 0x86200000 0x0 0x2600000>; + slpi_mem: slpi@90500000 { + reg = <0x0 0x90500000 0x0 0xa00000>; no-map; }; - rmtfs@86700000 { - compatible = "qcom,rmtfs-mem"; - - size = <0x0 0x200000>; - alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + gpu_mem: gpu@90f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90f00000 0x0 0x100000>; no-map; + }; - qcom,client-id = <1>; - qcom,vmid = <15>; + venus_mem: venus@91000000 { + reg = <0x0 0x91000000 0x0 0x500000>; + no-map; }; - zap_shader_region: gpu@8f200000 { - compatible = "shared-dma-pool"; - reg = <0x0 0x90b00000 0x0 0xa00000>; + mba_mem: mba@91500000 { + reg = <0x0 0x91500000 0x0 0x200000>; no-map; }; }; @@ -456,7 +461,7 @@ qcom,glink-channels = "rpm_requests"; rpmcc: qcom,rpmcc { - compatible = "qcom,rpmcc-msm8996"; + compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -513,12 +518,12 @@ qcom,local-pid = <0>; qcom,remote-pid = <2>; - smp2p_adsp_out: master-kernel { + adsp_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; - smp2p_adsp_in: slave-kernel { + adsp_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; @@ -526,7 +531,7 @@ }; }; - smp2p-modem { + smp2p-mpss { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; @@ -537,12 +542,12 @@ qcom,local-pid = <0>; qcom,remote-pid = <1>; - modem_smp2p_out: master-kernel { + mpss_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; - modem_smp2p_in: slave-kernel { + mpss_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; @@ -561,16 +566,17 @@ qcom,local-pid = <0>; qcom,remote-pid = <3>; - smp2p_slpi_in: slave-kernel { + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; + interrupt-controller; #interrupt-cells = <2>; }; - - smp2p_slpi_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; }; soc: soc { @@ -707,7 +713,7 @@ #thermal-sensor-cells = <1>; }; - cryptobam: dma@644000 { + cryptobam: dma-controller@644000 { compatible = "qcom,bam-v1.7.0"; reg = <0x00644000 0x24000>; interrupts = ; @@ -788,7 +794,7 @@ reg-names = "mdp_phys"; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; clocks = <&mmcc MDSS_AHB_CLK>, <&mmcc MDSS_AXI_CLK>, @@ -834,7 +840,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_BYTE0_CLK>, @@ -904,7 +910,7 @@ "hdcp_physical"; interrupt-parent = <&mdss>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <8>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_AHB_CLK>, @@ -1033,7 +1039,7 @@ }; zap-shader { - memory-region = <&zap_shader_region>; + memory-region = <&gpu_mem>; }; }; @@ -1574,7 +1580,7 @@ ranges; pcie0: pcie@600000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + compatible = "qcom,pcie-msm8996"; status = "disabled"; power-domains = <&gcc PCIE0_GDSC>; bus-range = <0x00 0xff>; @@ -1626,7 +1632,7 @@ }; pcie1: pcie@608000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + compatible = "qcom,pcie-msm8996"; power-domains = <&gcc PCIE1_GDSC>; bus-range = <0x00 0xff>; num-lanes = <1>; @@ -1679,7 +1685,7 @@ }; pcie2: pcie@610000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + compatible = "qcom,pcie-msm8996"; power-domains = <&gcc PCIE2_GDSC>; bus-range = <0x00 0xff>; num-lanes = <1>; @@ -1730,7 +1736,8 @@ }; ufshc: ufshc@624000 { - compatible = "qcom,ufshc"; + compatible = "qcom,msm8996-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; reg = <0x00624000 0x2500>; interrupts = ; @@ -2026,7 +2033,7 @@ <&venus_smmu 0x2c>, <&venus_smmu 0x2d>, <&venus_smmu 0x31>; - memory-region = <&venus_region>; + memory-region = <&venus_mem>; status = "disabled"; video-decoder { @@ -2122,6 +2129,105 @@ clock-names = "iface", "bus"; }; + slpi_pil: remoteproc@1c00000 { + compatible = "qcom,msm8996-slpi-pil"; + reg = <0x01c00000 0x4000>; + + interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&xo_board>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "xo", "aggre2"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8996_VDDSSCX>; + power-domain-names = "ssc_cx"; + + status = "disabled"; + + smd-edge { + interrupts = ; + + label = "dsps"; + mboxes = <&apcs_glb 25>; + qcom,smd-edge = <3>; + qcom,remote-pid = <3>; + }; + }; + + mss_pil: remoteproc@2080000 { + compatible = "qcom,msm8996-mss-pil"; + reg = <0x2080000 0x100>, + <0x2180000 0x020>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>, + <&gcc GCC_MSS_GPLL0_DIV_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "pnoc", "qdss"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + power-domains = <&rpmpd MSM8996_VDDCX>, + <&rpmpd MSM8996_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&mpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = ; + + label = "mpss"; + mboxes = <&apcs_glb 12>; + qcom,smd-edge = <0>; + qcom,remote-pid = <1>; + }; + }; + stm@3002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x3002000 0x1000>, @@ -2612,11 +2718,15 @@ interrupt-names = "hs_phy_irq", "ss_phy_irq"; clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, - <&gcc GCC_USB30_MASTER_CLK>, - <&gcc GCC_AGGRE2_USB3_AXI_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; @@ -2625,7 +2735,7 @@ power-domains = <&gcc USB30_GDSC>; status = "disabled"; - usb3_dwc3: dwc3@6a00000 { + usb3_dwc3: usb@6a00000 { compatible = "snps,dwc3"; reg = <0x06a00000 0xcc00>; interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; @@ -2786,9 +2896,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07577000 0x1000>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp1_i2c3_default>; pinctrl-1 = <&blsp1_i2c3_sleep>; @@ -2834,9 +2944,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b5000 0x1000>; interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c1_default>; pinctrl-1 = <&blsp2_i2c1_sleep>; @@ -2851,9 +2961,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b6000 0x1000>; interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c2_default>; pinctrl-1 = <&blsp2_i2c2_sleep>; @@ -2868,9 +2978,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b7000 0x1000>; interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c3_default>; @@ -2886,9 +2996,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75b9000 0x1000>; interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_i2c5_default>; dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; @@ -2902,9 +3012,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75ba000 0x1000>; interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c6_default>; pinctrl-1 = <&blsp2_i2c6_sleep>; @@ -2944,6 +3054,11 @@ <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB20_SLEEP_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB20_MASTER_CLK>; @@ -2953,7 +3068,7 @@ qcom,select-utmi-as-pipe-clk; status = "disabled"; - dwc3@7600000 { + usb2_dwc3: usb@7600000 { compatible = "snps,dwc3"; reg = <0x07600000 0xcc00>; interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; @@ -3023,19 +3138,19 @@ reg = <0x09300000 0x80000>; interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; clocks = <&rpmcc RPM_SMD_BB_CLK1>; clock-names = "xo"; - memory-region = <&adsp_region>; + memory-region = <&adsp_mem>; - qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; power-domains = <&rpmpd MSM8996_VDDCX>; diff --git a/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi index 9823d48a91..dbaea360bf 100644 --- a/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi +++ b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi @@ -188,6 +188,23 @@ }; }; +&blsp1_i2c6 { + status = "okay"; + + nfc@28 { + compatible = "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_int_active &nfc_enable_active>; + }; +}; + &blsp1_uart3 { status = "okay"; @@ -462,6 +479,20 @@ drive-strength = <8>; bias-pull-up; }; + + nfc_int_active: nfc-int-active { + pins = "gpio92"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + nfc_enable_active: nfc-enable-active { + pins = "gpio12", "gpio116"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; }; &ufshc { diff --git a/dts/src/arm64/qcom/msm8998.dtsi b/dts/src/arm64/qcom/msm8998.dtsi index 2fda21e810..758c45bbbe 100644 --- a/dts/src/arm64/qcom/msm8998.dtsi +++ b/dts/src/arm64/qcom/msm8998.dtsi @@ -815,6 +815,21 @@ clock-names = "xo", "sleep_clk"; clocks = <&xo>, <&sleep_clk>; + + /* + * The hypervisor typically configures the memory region where these clocks + * reside as read-only for the HLOS. If the HLOS tried to enable or disable + * these clocks on a device with such configuration (e.g. because they are + * enabled but unused during boot-up), the device will most likely decide + * to reboot. + * In light of that, we are conservative here and we list all such clocks + * as protected. The board dts (or a user-supplied dts) can override the + * list of protected clocks if it differs from the norm, and it is in fact + * desired for the HLOS to manage these clocks + */ + protected-clocks = , + , + ; }; rpm_msg_ram: sram@778000 { @@ -2008,10 +2023,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>, <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_AGGRE1_USB3_AXI_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; @@ -2025,7 +2043,7 @@ resets = <&gcc GCC_USB_30_BCR>; - usb3_dwc3: dwc3@a800000 { + usb3_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0x0a800000 0xcd00>; interrupts = ; diff --git a/dts/src/arm64/qcom/pm8350.dtsi b/dts/src/arm64/qcom/pm8350.dtsi index 308f9ca7c7..b10f33afa5 100644 --- a/dts/src/arm64/qcom/pm8350.dtsi +++ b/dts/src/arm64/qcom/pm8350.dtsi @@ -6,6 +6,30 @@ #include #include +/ { + thermal-zones { + pm8350_thermal: pm8350c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350_temp_alarm>; + + trips { + pm8350_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm8350_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm8350: pmic@1 { compatible = "qcom,pm8350", "qcom,spmi-pmic"; @@ -13,6 +37,13 @@ #address-cells = <1>; #size-cells = <0>; + pm8350_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pm8350_gpios: gpio@8800 { compatible = "qcom,pm8350-gpio"; reg = <0x8800>; diff --git a/dts/src/arm64/qcom/pm8350b.dtsi b/dts/src/arm64/qcom/pm8350b.dtsi index b23bb1d49a..f1d1d4c8ed 100644 --- a/dts/src/arm64/qcom/pm8350b.dtsi +++ b/dts/src/arm64/qcom/pm8350b.dtsi @@ -6,6 +6,30 @@ #include #include +/ { + thermal-zones { + pm8350b_thermal: pm8350c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350b_temp_alarm>; + + trips { + pm8350b_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm8350b_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm8350b: pmic@3 { compatible = "qcom,pm8350b", "qcom,spmi-pmic"; @@ -13,6 +37,13 @@ #address-cells = <1>; #size-cells = <0>; + pm8350b_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pm8350b_gpios: gpio@8800 { compatible = "qcom,pm8350b-gpio"; reg = <0x8800>; diff --git a/dts/src/arm64/qcom/pm8350c.dtsi b/dts/src/arm64/qcom/pm8350c.dtsi index e1b75ae0a8..e0bbb67717 100644 --- a/dts/src/arm64/qcom/pm8350c.dtsi +++ b/dts/src/arm64/qcom/pm8350c.dtsi @@ -29,26 +29,35 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pm8350c_pwm: pwm@e800 { + compatible = "qcom,pm8350c-pwm"; + reg = <0xe800>; + #pwm-cells = <2>; + status = "disabled"; + }; }; }; -&thermal_zones { - pm8350c_thermal: pm8350c-thermal { - polling-delay-passive = <100>; - polling-delay = <0>; - thermal-sensors = <&pm8350c_temp_alarm>; - - trips { - pm8350c_trip0: trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; +/ { + thermal-zones { + pm8350c_thermal: pm8350c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350c_temp_alarm>; + + trips { + pm8350c_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; - pm8350c_crit: pm8350c-crit { - temperature = <115000>; - hysteresis = <0>; - type = "critical"; + pm8350c_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; }; }; }; diff --git a/dts/src/arm64/qcom/pm8450.dtsi b/dts/src/arm64/qcom/pm8450.dtsi new file mode 100644 index 0000000000..ae5bce3cf4 --- /dev/null +++ b/dts/src/arm64/qcom/pm8450.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include +#include + +/ { + thermal-zones { + pm8450-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8450_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8450: pmic@7 { + compatible = "qcom,pm8450", "qcom,spmi-pmic"; + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8450_gpios: gpio@8800 { + compatible = "qcom,pm8450-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8450_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/pmr735a.dtsi b/dts/src/arm64/qcom/pmr735a.dtsi index b4b6ba24f8..febda50779 100644 --- a/dts/src/arm64/qcom/pmr735a.dtsi +++ b/dts/src/arm64/qcom/pmr735a.dtsi @@ -32,23 +32,25 @@ }; }; -&thermal_zones { - pmr735a_thermal: pmr735a-thermal { - polling-delay-passive = <100>; - polling-delay = <0>; - thermal-sensors = <&pmr735a_temp_alarm>; +/ { + thermal-zones { + pmr735a_thermal: pmr735a-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmr735a_temp_alarm>; - trips { - pmr735a_trip0: trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; + trips { + pmr735a_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; - pmr735a_crit: pmr735a-crit { - temperature = <115000>; - hysteresis = <0>; - type = "critical"; + pmr735a_crit: pmr735a-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; }; }; }; diff --git a/dts/src/arm64/qcom/pmr735b.dtsi b/dts/src/arm64/qcom/pmr735b.dtsi index 1144086280..6043241886 100644 --- a/dts/src/arm64/qcom/pmr735b.dtsi +++ b/dts/src/arm64/qcom/pmr735b.dtsi @@ -6,6 +6,30 @@ #include #include +/ { + thermal-zones { + pmr735a_thermal: pmr735a-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmr735b_temp_alarm>; + + trips { + pmr735b_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pmr735b_crit: pmr735a-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmr735b: pmic@5 { compatible = "qcom,pmr735b", "qcom,spmi-pmic"; @@ -13,6 +37,13 @@ #address-cells = <1>; #size-cells = <0>; + pmr735b_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pmr735b_gpios: gpio@8800 { compatible = "qcom,pmr735b-gpio"; reg = <0x8800>; diff --git a/dts/src/arm64/qcom/qcs404-evb.dtsi b/dts/src/arm64/qcom/qcs404-evb.dtsi index a80c578484..2f3104a844 100644 --- a/dts/src/arm64/qcom/qcs404-evb.dtsi +++ b/dts/src/arm64/qcom/qcs404-evb.dtsi @@ -337,9 +337,10 @@ &usb3 { status = "okay"; - dwc3@7580000 { - dr_mode = "host"; - }; +}; + +&usb3_dwc3 { + dr_mode = "host"; }; &usb2_phy_prim { diff --git a/dts/src/arm64/qcom/qcs404.dtsi b/dts/src/arm64/qcom/qcs404.dtsi index 3f06f7cd3c..d912166b75 100644 --- a/dts/src/arm64/qcom/qcs404.dtsi +++ b/dts/src/arm64/qcom/qcs404.dtsi @@ -226,7 +226,7 @@ qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { - compatible = "qcom,rpmcc-qcs404"; + compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -529,7 +529,7 @@ }; usb3: usb@7678800 { - compatible = "qcom,dwc3"; + compatible = "qcom,qcs404-dwc3", "qcom,dwc3"; reg = <0x07678800 0x400>; #address-cells = <1>; #size-cells = <1>; @@ -544,7 +544,7 @@ assigned-clock-rates = <19200000>, <200000000>; status = "disabled"; - dwc3@7580000 { + usb3_dwc3: usb@7580000 { compatible = "snps,dwc3"; reg = <0x07580000 0xcd00>; interrupts = ; @@ -558,7 +558,7 @@ }; usb2: usb@79b8800 { - compatible = "qcom,dwc3"; + compatible = "qcom,qcs404-dwc3", "qcom,dwc3"; reg = <0x079b8800 0x400>; #address-cells = <1>; #size-cells = <1>; @@ -573,7 +573,7 @@ assigned-clock-rates = <19200000>, <133333333>; status = "disabled"; - dwc3@78c0000 { + usb@78c0000 { compatible = "snps,dwc3"; reg = <0x078c0000 0xcc00>; interrupts = ; @@ -823,8 +823,8 @@ interrupts = ; clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp1_dma 1>, <&blsp1_dma 0>; - dma-names = "rx", "tx"; + dmas = <&blsp1_dma 0>, <&blsp1_dma 1>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart0_default>; status = "disabled"; @@ -836,8 +836,8 @@ interrupts = ; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp1_dma 3>, <&blsp1_dma 2>; - dma-names = "rx", "tx"; + dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart1_default>; status = "disabled"; @@ -849,8 +849,8 @@ interrupts = ; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp1_dma 5>, <&blsp1_dma 4>; - dma-names = "rx", "tx"; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart2_default>; status = "okay"; @@ -903,8 +903,8 @@ interrupts = ; clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp1_dma 7>, <&blsp1_dma 6>; - dma-names = "rx", "tx"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart3_default>; status = "disabled"; @@ -914,9 +914,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b5000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c0_default>; #address-cells = <1>; @@ -928,9 +928,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b5000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi0_default>; #address-cells = <1>; @@ -942,9 +942,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b6000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c1_default>; #address-cells = <1>; @@ -956,9 +956,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b6000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi1_default>; #address-cells = <1>; @@ -970,9 +970,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b7000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c2_default>; #address-cells = <1>; @@ -984,9 +984,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b7000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi2_default>; #address-cells = <1>; @@ -998,9 +998,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b8000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c3_default>; #address-cells = <1>; @@ -1012,9 +1012,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b8000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi3_default>; #address-cells = <1>; @@ -1026,9 +1026,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b9000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c4_default>; #address-cells = <1>; @@ -1040,9 +1040,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b9000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi4_default>; #address-cells = <1>; @@ -1067,8 +1067,8 @@ interrupts = ; clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp2_dma 1>, <&blsp2_dma 0>; - dma-names = "rx", "tx"; + dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_uart0_default>; status = "disabled"; @@ -1078,9 +1078,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07af5000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_i2c0_default>; #address-cells = <1>; @@ -1092,9 +1092,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x07af5000 0x600>; interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_spi0_default>; #address-cells = <1>; diff --git a/dts/src/arm64/qcom/qrb5165-rb5.dts b/dts/src/arm64/qcom/qrb5165-rb5.dts index 845eb7a6bf..0e63f707b9 100644 --- a/dts/src/arm64/qcom/qrb5165-rb5.dts +++ b/dts/src/arm64/qcom/qrb5165-rb5.dts @@ -29,7 +29,7 @@ }; /* Fixed crystal oscillator dedicated to MCP2518FD */ - clk40M: can_clock { + clk40M: can-clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <40000000>; diff --git a/dts/src/arm64/qcom/sa8155p-adp.dts b/dts/src/arm64/qcom/sa8155p-adp.dts index 8756c2b25c..ba547ca9fc 100644 --- a/dts/src/arm64/qcom/sa8155p-adp.dts +++ b/dts/src/arm64/qcom/sa8155p-adp.dts @@ -47,6 +47,29 @@ vin-supply = <&vreg_3p3>; }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-wrr; + + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + }; }; &apps_rsc { @@ -303,6 +326,44 @@ }; }; +ðernet { + status = "okay"; + + snps,reset-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 11000 70000>; + + snps,ptp-ref-clk-rate = <250000000>; + snps,ptp-req-clk-rate = <96000000>; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet_defaults>; + + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii"; + max-speed = <1000>; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + + compatible = "snps,dwmac-mdio"; + + /* Micrel KSZ9031RNZ PHY */ + rgmii_phy: phy@7 { + reg = <0x7>; + + interrupt-parent = <&tlmm>; + interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */ + device_type = "ethernet-phy"; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + &qupv3_id_1 { status = "okay"; }; @@ -317,6 +378,20 @@ firmware-name = "qcom/sa8155p/cdsp.mdt"; }; +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */ + vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */ + bus-width = <4>; + no-sdio; + no-emmc; +}; + &uart2 { status = "okay"; }; @@ -387,9 +462,78 @@ vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; }; +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l18c_0p88>; + vdda-pll-supply = <&vreg_l8c_1p2>; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l18c_0p88>; + vdda-pll-supply = <&vreg_l8c_1p2>; +}; + &tlmm { gpio-reserved-ranges = <0 4>; + sdc2_on: sdc2_on { + clk { + pins = "sdc2_clk"; + bias-disable; /* No pull */ + drive-strength = <16>; /* 16 MA */ + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + data { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + sd-cd { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc2_off: sdc2_off { + clk { + pins = "sdc2_clk"; + bias-disable; /* No pull */ + drive-strength = <2>; /* 2 MA */ + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + + data { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + + sd-cd { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + usb2phy_ac_en1_default: usb2phy_ac_en1_default { mux { pins = "gpio113"; @@ -407,4 +551,53 @@ drive-strength = <2>; }; }; + + ethernet_defaults: ethernet-defaults { + mdc { + pins = "gpio7"; + function = "rgmii"; + bias-pull-up; + }; + + mdio { + pins = "gpio59"; + function = "rgmii"; + bias-pull-up; + }; + + rgmii-rx { + pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116"; + function = "rgmii"; + bias-disable; + drive-strength = <2>; + }; + + rgmii-tx { + pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121"; + function = "rgmii"; + bias-pull-up; + drive-strength = <16>; + }; + + phy-intr { + pins = "gpio124"; + function = "emac_phy"; + bias-disable; + drive-strength = <8>; + }; + + pps { + pins = "gpio81"; + function = "emac_pps"; + bias-disable; + drive-strength = <8>; + }; + + phy-reset { + pins = "gpio79"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; + }; + }; }; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi index c81805ef22..8ac1f1e610 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi @@ -5,15 +5,10 @@ * Copyright 2020 Google LLC. */ -#include "sc7180.dtsi" - -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" -/* Deleted nodes from trogdor.dtsi */ +/* Deleted nodes from sc7180-trogdor.dtsi */ /delete-node/ &alc5682; /delete-node/ &pp3300_codec; @@ -111,10 +106,6 @@ ap_ts_pen_1v8: &i2c4 { }; }; -&i2c7 { - status = "disabled"; -}; - &i2c9 { status = "disabled"; }; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r2.dts b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r2.dts index 70032983fb..d9e905ed4e 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r2.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r2.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-homestar.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r3.dts b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r3.dts index e92e2e9e48..242c178fdc 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r3.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r3.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-homestar.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r4.dts b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r4.dts index 0de0c97f57..66dd870162 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r4.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r4.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-homestar.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi index bff2b556cc..9b3e3d13c1 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi @@ -5,9 +5,6 @@ * Copyright 2021 Google LLC. */ -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" / { @@ -88,10 +85,6 @@ ap_h1_spi: &spi0 {}; }; }; -&ap_tp_i2c { - status = "disabled"; -}; - ap_ts_pen_1v8: &i2c4 { status = "okay"; clock-frequency = <400000>; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts index f360ff2722..235cda2bba 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts index 4e35aec6a1..913b5fc3ba 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" @@ -20,7 +20,7 @@ /delete-node/&ap_ts; &panel { - compatible = "innolux,n116bca-ea1", "innolux,n116bge"; + compatible = "edp-panel"; }; &sdhc_2 { diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r4.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r4.dts index 42b4bbcc76..d42dcd4211 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r4.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r4.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r9.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r9.dts index dc47842bc6..15d77dc5f9 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r9.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r9.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts index b142006478..bfbf26fd2c 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1-lte.dts index e16ba7b01f..eb20157f6a 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1-lte.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1-lte.dts @@ -13,10 +13,6 @@ compatible = "google,lazor-rev1-sku0", "google,lazor-rev2-sku0", "qcom,sc7180"; }; -&ap_sar_sensor { - status = "okay"; -}; - &ap_sar_sensor_i2c { status = "okay"; }; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts index 59740799fa..d45a59afd7 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts index 18ef9da719..6ff81c1f7c 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts index c5c9feff41..e58e36e359 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" @@ -20,10 +20,6 @@ "qcom,sc7180"; }; -&ap_sar_sensor { - status = "okay"; -}; - &ap_sar_sensor_i2c { status = "okay"; }; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts index 7adcedbf08..76c83f88cb 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts index 7f5c015e1e..960f7b7ce0 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts index 344b57c035..38027f13b9 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" @@ -17,10 +17,6 @@ compatible = "google,lazor-sku0", "qcom,sc7180"; }; -&ap_sar_sensor { - status = "okay"; -}; - &ap_sar_sensor_i2c { status = "okay"; }; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9.dts index 83f6a4eb5a..56dd222650 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi index 69666f9217..fe2369c29a 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi @@ -5,9 +5,6 @@ * Copyright 2020 Google LLC. */ -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" &ap_sar_sensor { @@ -19,6 +16,10 @@ ap_h1_spi: &spi0 {}; semtech,avg-pos-strength = <64>; }; +&ap_tp_i2c { + status = "okay"; +}; + /* * Lazor is stuffed with a 47k NTC as charger thermistor which currently is * not supported by the PM6150 ADC driver. Disable the charger thermal zone diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi index e47c74e513..3df4920295 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi @@ -5,11 +5,6 @@ * Copyright 2020 Google LLC. */ -#include "sc7180.dtsi" - -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" @@ -36,6 +31,10 @@ ap_h1_spi: &spi0 {}; realtek,dmic-clk-driving-high; }; +&ap_tp_i2c { + status = "okay"; +}; + &cpu6_alert0 { temperature = <60000>; }; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-r1.dts b/dts/src/arm64/qcom/sc7180-trogdor-r1.dts index 457c254998..352827e574 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-r1.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-r1.dts @@ -7,11 +7,6 @@ /dts-v1/; -#include "sc7180.dtsi" - -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" @@ -20,6 +15,10 @@ ap_h1_spi: &spi0 {}; compatible = "google,trogdor", "qcom,sc7180"; }; +&ap_tp_i2c { + status = "okay"; +}; + ap_ts_pen_1v8: &i2c4 { status = "okay"; clock-frequency = <400000>; diff --git a/dts/src/arm64/qcom/sc7180-trogdor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor.dtsi index 732e1181af..e55dbaa6dc 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor.dtsi @@ -11,7 +11,8 @@ #include #include -/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "sc7180.dtsi" +/* PMICs depend on spmi_bus label and so must come after sc7180.dtsi */ #include "pm6150.dtsi" #include "pm6150l.dtsi" @@ -626,7 +627,7 @@ }; }; -&ap_ec_spi { +ap_ec_spi: &spi6 { status = "okay"; cros_ec: ec@0 { compatible = "google,cros-ec-spi"; @@ -675,7 +676,7 @@ }; }; -&ap_h1_spi { +ap_h1_spi: &spi0 { status = "okay"; cr50: tpm@0 { compatible = "google,cr50"; @@ -722,13 +723,11 @@ ap_sar_sensor_i2c: &i2c5 { vdd-supply = <&pp3300_a>; svdd-supply = <&pp1800_prox>; - status = "disabled"; label = "proximity-wifi"; }; }; ap_tp_i2c: &i2c7 { - status = "okay"; clock-frequency = <400000>; trackpad: trackpad@15 { diff --git a/dts/src/arm64/qcom/sc7180.dtsi b/dts/src/arm64/qcom/sc7180.dtsi index e1c46b80f1..5dcaac23a1 100644 --- a/dts/src/arm64/qcom/sc7180.dtsi +++ b/dts/src/arm64/qcom/sc7180.dtsi @@ -1421,13 +1421,6 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sc7180-ipa-virt"; - reg = <0 0x01e00000 0 0x1000>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - ipa: ipa@1e40000 { compatible = "qcom,sc7180-ipa"; @@ -2762,10 +2755,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -2786,7 +2782,7 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xe000>; interrupts = ; @@ -3522,7 +3518,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/dts/src/arm64/qcom/sc7280-crd-r3.dts b/dts/src/arm64/qcom/sc7280-crd-r3.dts new file mode 100644 index 0000000000..344338ad8a --- /dev/null +++ b/dts/src/arm64/qcom/sc7280-crd-r3.dts @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 CRD board device tree source + * + * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "sc7280-idp.dtsi" +#include "sc7280-idp-ec-h1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)"; + compatible = "qcom,sc7280-crd", + "google,hoglin-rev3", "google,hoglin-rev4", + "google,piglin-rev3", "google,piglin-rev4", + "qcom,sc7280"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + pmg1110-regulators { + compatible = "qcom,pmg1110-rpmh-regulators"; + qcom,pmic-id = "k"; + + vreg_s1k_1p0: smps1 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + }; +}; + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + vdd-supply = <&vreg_l18b_1p8>; + + wakeup-source; + }; +}; + +ap_ts_pen_1v8: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5c { + compatible = "hid-over-i2c"; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <500>; + hid-descr-addr = <0x0000>; + + vdd-supply = <&vreg_l19b_1p8>; + }; +}; + +&nvme_3v3_regulator { + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; +}; + +&nvme_pwren { + pins = "gpio51"; +}; + +&tlmm { + tp_int_odl: tp-int-odl { + pins = "gpio7"; + function = "gpio"; + bias-disable; + }; + + ts_int_l: ts-int-l { + pins = "gpio55"; + function = "gpio"; + bias-pull-up; + }; + + ts_reset_l: ts-reset-l { + pins = "gpio54"; + function = "gpio"; + bias-disable; + }; +}; diff --git a/dts/src/arm64/qcom/sc7280-crd.dts b/dts/src/arm64/qcom/sc7280-crd.dts deleted file mode 100644 index e2efbdde53..0000000000 --- a/dts/src/arm64/qcom/sc7280-crd.dts +++ /dev/null @@ -1,105 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * sc7280 CRD board device tree source - * - * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. - */ - -/dts-v1/; - -#include "sc7280-idp.dtsi" -#include "sc7280-idp-ec-h1.dtsi" - -/ { - model = "Qualcomm Technologies, Inc. sc7280 CRD platform"; - compatible = "qcom,sc7280-crd", "google,hoglin", "qcom,sc7280"; - - aliases { - serial0 = &uart5; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&apps_rsc { - pmg1110-regulators { - compatible = "qcom,pmg1110-rpmh-regulators"; - qcom,pmic-id = "k"; - - vreg_s1k_1p0: smps1 { - regulator-min-microvolt = <1010000>; - regulator-max-microvolt = <1170000>; - }; - }; -}; - -ap_tp_i2c: &i2c0 { - status = "okay"; - clock-frequency = <400000>; - - trackpad: trackpad@15 { - compatible = "hid-over-i2c"; - reg = <0x15>; - pinctrl-names = "default"; - pinctrl-0 = <&tp_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - - post-power-on-delay-ms = <20>; - hid-descr-addr = <0x0001>; - vdd-supply = <&vreg_l18b_1p8>; - - wakeup-source; - }; -}; - -ap_ts_pen_1v8: &i2c13 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@5c { - compatible = "hid-over-i2c"; - reg = <0x5c>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <55 IRQ_TYPE_LEVEL_LOW>; - - post-power-on-delay-ms = <500>; - hid-descr-addr = <0x0000>; - - vdd-supply = <&vreg_l19b_1p8>; - }; -}; - -&nvme_3v3_regulator { - gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; -}; - -&nvme_pwren { - pins = "gpio51"; -}; - -&tlmm { - tp_int_odl: tp-int-odl { - pins = "gpio7"; - function = "gpio"; - bias-disable; - }; - - ts_int_l: ts-int-l { - pins = "gpio55"; - function = "gpio"; - bias-pull-up; - }; - - ts_reset_l: ts-reset-l { - pins = "gpio54"; - function = "gpio"; - bias-disable; - }; -}; diff --git a/dts/src/arm64/qcom/sc7280-herobrine-crd.dts b/dts/src/arm64/qcom/sc7280-herobrine-crd.dts new file mode 100644 index 0000000000..a4ac33c4fd --- /dev/null +++ b/dts/src/arm64/qcom/sc7280-herobrine-crd.dts @@ -0,0 +1,365 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sc7280 CRD 3+ board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)"; + compatible = "google,hoglin", "qcom,sc7280"; + + /* FIXED REGULATORS */ + + /* + * On most herobrine boards PPVAR_SYS directly provides VREG_EDP_BL. + * However, on CRD there's an extra regulator in the way. Since this + * is expected to be uncommon, we'll leave the "vreg_edp_bl" label + * in the baseboard herobrine.dtsi point at "ppvar_sys" and then + * make a "_crd" specific version here. + */ + vreg_edp_bl_crd: vreg-edp-bl-crd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_edp_bl_crd"; + + gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + vin-supply = <&ppvar_sys>; + }; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +&apps_rsc { + pmg1110-regulators { + compatible = "qcom,pmg1110-rpmh-regulators"; + qcom,pmic-id = "k"; + + vreg_s1k_1p0: smps1 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + }; +}; + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + vdd-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +ap_ts_pen_1v8: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5c { + compatible = "hid-over-i2c"; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <500>; + hid-descr-addr = <0x0000>; + + vdd-supply = <&pp3300_left_in_mlb>; + }; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pm8350c_pwm_backlight { + power-supply = <&vreg_edp_bl_crd>; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* For SD Card */ +&sdhc_2 { + status = "okay"; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to CRD board and is named it gets that name. + * - If a pin goes to CRD board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "EDP_BL_REG_EN", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; + + edp_bl_reg_en: edp-bl-reg-en { + pins = "gpio6"; + function = "normal"; + bias-disable; + qcom,drive-strength = ; + }; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "PCIE1_RESET_N", + "PCIE1_WAKE_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "", + "TPAD_INT_N", + "", + "", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "QSPI_DATA_0", + "QSPI_DATA_1", + "QSPI_CLK", + "QSPI_CS_N_1", + /* + * AP_FLASH_WP is crossystem ABI. Schematics call it + * BIOS_FLASH_WP_L (the '_L' suffix is misleading, the + * signal is active high). + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_N", + "", + + "CAM0_RST_N", /* 20 */ + "CAM1_RST_N", + "SM_DBG_UART_TX", + "SM_DBG_UART_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "", + "HUB_RST", + "", + "", + "", + "", + "", + "", + + "EC_SPI_MISO_GPIO40", /* 40 */ + "EC_SPI_MOSI_GPIO41", + "EC_SPI_CLK_GPIO42", + "EC_SPI_CS_GPIO43", + "", + "EARLY_EUD_EN", + "", + "DP_HOT_PLUG_DETECT", + "AP_BRD_ID_0", + "AP_BRD_ID_1", + + "AP_BRD_ID_2", /* 50 */ + "NVME_PWR_REG_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "", + "", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "", + "", + "", + "CCI_I2C_SDA0", + + "CCI_I2C_SCL0", /* 70 */ + "", + "", + "", + "", + "", + "", + "", + "", + "PCIE1_CLK_REQ_N", + + "EN_PP3300_DX_EDP", /* 80 */ + "US_EURO_HS_SEL", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CARD_DET_CONN", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "", + "", + "", + "", + + "", /* 100 */ + "", + "", + "", + "H1_AP_INT_N", + "", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RESET", + "UIM1_PRESENT", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "", + + "SDM_RFFE1_DATA", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "", + + "", /* 130 */ + "", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "", + + "SAR1_INT_N", /* 140 */ + "SAR0_INT_N", + "", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_N", + "EN_PP3300_HUB", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r0.dts b/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r0.dts deleted file mode 100644 index 1779d96c30..0000000000 --- a/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r0.dts +++ /dev/null @@ -1,1352 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Herobrine board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include -#include -#include -#include -#include -#include - -#include "sc7280.dtsi" - -/* PMICs depend on spmi_bus label and so must come after SoC */ -#include "pm7325.dtsi" -#include "pm8350c.dtsi" -#include "pmk8350.dtsi" - -#include "sc7280-chrome-common.dtsi" - -/ { - model = "Google Herobrine (rev0)"; - compatible = "google,herobrine-rev0", "qcom,sc7280"; -}; - -/ { - aliases { - serial0 = &uart5; - serial1 = &uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - /* FIXED REGULATORS - parents above children */ - - /* This is the top level supply and variable voltage */ - ppvar_sys: ppvar-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "ppvar_sys"; - regulator-always-on; - regulator-boot-on; - }; - - /* This divides ppvar_sys by 2, so voltage is variable */ - src_vph_pwr: src-vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "src_vph_pwr"; - - /* EC turns on with switchcap_on; always on for AP */ - regulator-always-on; - regulator-boot-on; - - vin-supply = <&ppvar_sys>; - }; - - pp5000_s3: pp5000-s3-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp5000_s3"; - - /* EC turns on with en_pp5000_s3; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300_z1: pp3300-z1-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_z1"; - - /* EC turns on with en_pp3300_z1; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300_audio: - pp3300_codec: pp3300-codec-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_codec"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_codec>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_cam: - pp3300_edp: - pp3300_ts: pp3300-edp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_edp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_dx_edp>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_fp: - pp3300_fp_ls: - pp3300_mcu: pp3300-fp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_fp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-boot-on; - regulator-always-on; - - /* - * WARNING: it is intentional that GPIO 42 isn't listed here. - * The userspace script for updating the fingerprint firmware - * needs to control the FP regulators during a FW update, - * hence the signal can't be owned by the kernel regulator. - */ - - pinctrl-names = "default"; - pinctrl-0 = <&en_fp_rails>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_hub: pp3300-hub-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_hub"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-boot-on; - regulator-always-on; - - gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_hub>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_tp: pp3300-tp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_tp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - /* AP turns on with PP1800_L18B_S0; always on for AP */ - regulator-always-on; - regulator-boot-on; - - vin-supply = <&pp3300_z1>; - }; - - pp2850_uf_cam: pp2850-uf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp2850_uf_cam"; - - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - - gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&uf_cam_en>; - - vin-supply = <&pp3300_cam>; - }; - - pp2850_vcm_wf_cam: pp2850-vcm-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp2850_vcm_wf_cam"; - - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&wf_cam_en>; - - vin-supply = <&pp3300_cam>; - }; - - pp2850_wf_cam: pp2850-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp2850_wf_cam"; - - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&wf_cam_en>; - */ - - vin-supply = <&pp3300_cam>; - }; - - pp1800_fp: pp1800-fp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1800_fp"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - regulator-always-on; - - /* - * WARNING: it is intentional that GPIO 42 isn't listed here. - * The userspace script for updating the fingerprint firmware - * needs to control the FP regulators during a FW update, - * hence the signal can't be owned by the kernel regulator. - */ - - pinctrl-names = "default"; - pinctrl-0 = <&en_fp_rails>; - - vin-supply = <&pp1800_l18b_s0>; - status = "disabled"; - }; - - pp1800_uf_cam: pp1800-uf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1800_uf_cam"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&uf_cam_en>; - */ - - vin-supply = <&pp1800_l19b>; - }; - - pp1800_wf_cam: pp1800-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1800_wf_cam"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&wf_cam_en>; - */ - - vin-supply = <&pp1800_l19b>; - }; - - pp1200_wf_cam: pp1200-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1200_wf_cam"; - - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&wf_cam_en>; - */ - - vin-supply = <&pp1200_l6b>; - }; - - /* BOARD-SPECIFIC TOP LEVEL NODES */ - - gpio_keys: gpio-keys { - compatible = "gpio-keys"; - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&pen_pdct_l>; - - pen_insert: pen-insert { - label = "Pen Insert"; - - /* Insert = low, eject = high */ - gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - wakeup-event-action = ; - wakeup-source; - }; - }; - - pwmleds { - compatible = "pwm-leds"; - status = "disabled"; - keyboard_backlight: keyboard-backlight { - status = "disabled"; - label = "cros_ec::kbd_backlight"; - pwms = <&cros_ec_pwm 0>; - max-brightness = <1023>; - }; - }; -}; - -&apps_rsc { - pm7325-regulators { - compatible = "qcom,pm7325-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd19_pmu_pcie_i: - vdd19_pmu_rfa_i: - vreg_s1b_wlan: - vreg_s1b: smps1 { - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <2040000>; - }; - - vdd_pmu_aon_i: - vreg_s7b_wlan: - vreg_s7b: smps7 { - regulator-min-microvolt = <535000>; - regulator-max-microvolt = <1120000>; - }; - - vdd13_pmu_pcie_i: - vdd13_pmu_rfa_i: - vreg_s8b_wlan: - vreg_s8b: smps8 { - regulator-min-microvolt = <1256000>; - regulator-max-microvolt = <1500000>; - }; - - vdda_usb_ss_dp_core: - vreg_l1b: ldo1 { - regulator-min-microvolt = <825000>; - regulator-max-microvolt = <925000>; - regulator-initial-mode = ; - }; - - vdda_usb_hs0_3p1: - vreg_l2b: ldo2 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = ; - }; - - pp1200_l6b: - vdd_ufs_1p2: - vdd_vref: - vdda_csi01_1p2: - vdda_csi23_1p2: - vdda_csi4_1p2: - vdda_dsi0_1p2: - vdda_pcie0_1p2: - vdda_pcie1_1p2: - vdda_usb_ss_dp_1p2: - vdda_qlink0_1p2_ck: - vdda_qlink1_1p2_ck: - vreg_l6b_1p2: - vreg_l6b: ldo6 { - regulator-min-microvolt = <1120000>; - regulator-max-microvolt = <1408000>; - regulator-initial-mode = ; - }; - - pp2950_l7b: - vreg_l7b: ldo7 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - codec_vcc: - pp1800_l18b_s0: - pp1800_ts: - vdd1: - vddpx_0: - vddpx_3: - vddpx_7: - vreg_l18b: ldo18 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = ; - }; - - pp1800_l19b: - vddpx_ts: - vddpx_wl4otp: - vreg_l19b: ldo19 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - }; - - pm8350c-regulators { - compatible = "qcom,pm8350c-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_s1c: smps1 { - regulator-min-microvolt = <2190000>; - regulator-max-microvolt = <2210000>; - }; - - vddpx_1: - vreg_s9c: smps9 { - regulator-min-microvolt = <1010000>; - regulator-max-microvolt = <1170000>; - }; - - pp1800_l1c: - pp1800_pen: - vdd_a_gfx_cs_1p1: - vdd_a_cxo_1p8: - vdd_qfprom: - vdda_apc_cs_1p8: - vdda_qrefs_1p8: - vdda_turing_q6_cs_1p8: - vdda_usb_hs0_1p8: - vreg_l1c: ldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = ; - }; - - dmic_vdd: - pp1800_alc5682: - pp1800_l2c: - pp1800_vreg_alc5682: - vreg_l2c: ldo2 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = ; - }; - - pp3300_sar: - pp3300_sensor: - vreg_l3c: ldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3540000>; - regulator-initial-mode = ; - }; - - ppvar_uim1: - vddpx_5: - vreg_l4c: ldo4 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = ; - }; - - pp2950_l5c: - uim_vcc: - vddpx_6: - vreg_l5c: ldo5 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = ; - }; - - ppvar_l6c: - vddpx_2: - vreg_l6c: ldo6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-initial-mode = ; - }; - - vreg_l7c: ldo7 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = ; - }; - - pp1800_prox: - pp1800_sar: - vreg_l8c: ldo8 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = ; - }; - - pp2950_l9c: - vreg_l9c: ldo9 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vdd_a_gnss_0p9: - vdd_ufs_core: - vdd_usb_hs0_core: - vdd_vref_0p9: - vdda_csi01_0p9: - vdda_csi23_0p9: - vdda_csi4_0p9: - vdda_dsi0_pll_0p9: - vdda_dsi0_0p9: - vdda_pcie0_core: - vdda_pcie1_core: - vdda_qlink0_0p9: - vdda_qlink1_0p9: - vdda_qlink0_0p9_ck: - vdda_qlink1_0p9_ck: - vdda_qrefs_0p875: - vreg_l10c_0p8: - vreg_l10c: ldo10 { - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <1050000>; - regulator-initial-mode = ; - }; - - pp2800_l11c: - vreg_l11c: ldo11 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = ; - }; - - pp1800_l12c: - vreg_l12c: ldo12 { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = ; - }; - - pp3300_l13c: - vreg_l13c: ldo13 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = ; - }; - - vreg_bob: bob { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3960000>; - regulator-initial-mode = ; - }; - }; -}; - -ap_tp_i2c: &i2c1 { - status = "okay"; - clock-frequency = <400000>; - - trackpad: trackpad@15 { - compatible = "elan,ekth3000"; - reg = <0x15>; - pinctrl-names = "default"; - pinctrl-0 = <&tp_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <102 IRQ_TYPE_EDGE_FALLING>; - - vcc-supply = <&pp3300_z1>; - - wakeup-source; - }; -}; - -ap_h1_i2c: &i2c12 { - status = "okay"; - clock-frequency = <400000>; - - tpm@50 { - compatible = "google,cr50"; - reg = <0x50>; - - pinctrl-names = "default"; - pinctrl-0 = <&h1_ap_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <54 IRQ_TYPE_EDGE_RISING>; - }; -}; - -ap_ts_pen: &i2c13 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <81 IRQ_TYPE_LEVEL_LOW>; - - post-power-on-delay-ms = <20>; - hid-descr-addr = <0x0001>; - - vdd-supply = <&pp3300_ts>; - }; -}; - -&pm7325_gpios { - status = "disabled"; /* No GPIOs are connected */ -}; - -&pmk8350_gpios { - status = "disabled"; /* No GPIOs are connected */ -}; - -&pmk8350_rtc { - status = "disabled"; -}; - -&pmk8350_vadc { - pmk8350_die_temp { - reg = ; - label = "pmk8350_die_temp"; - qcom,pre-scaling = <1 1>; - }; - - pmr735a_die_temp { - reg = ; - label = "pmr735a_die_temp"; - qcom,pre-scaling = <1 1>; - }; -}; - -&qfprom { - vcc-supply = <&vdd_qfprom>; -}; - -&qupv3_id_0 { - status = "okay"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&sdhc_1 { - status = "okay"; - - vmmc-supply = <&pp2950_l7b>; - vqmmc-supply = <&pp1800_l19b>; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; - pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; - vmmc-supply = <&pp2950_l9c>; - vqmmc-supply = <&ppvar_l6c>; - - cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; -}; - -ap_ec_spi: &spi8 { - status = "okay"; - - pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs_gpio_init_high>, <&qup_spi8_cs_gpio>; - cs-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - - cros_ec: ec@0 { - compatible = "google,cros-ec-spi"; - reg = <0>; - interrupt-parent = <&tlmm>; - interrupts = <142 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ap_ec_int_l>; - spi-max-frequency = <3000000>; - - cros_ec_pwm: pwm { - compatible = "google,cros-ec-pwm"; - #pwm-cells = <1>; - }; - - i2c_tunnel: i2c-tunnel { - compatible = "google,cros-ec-i2c-tunnel"; - google,remote-bus = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - typec { - compatible = "google,cros-ec-typec"; - #address-cells = <1>; - #size-cells = <0>; - - usb_c0: connector@0 { - compatible = "usb-c-connector"; - reg = <0>; - label = "left"; - power-role = "dual"; - data-role = "host"; - try-power-role = "source"; - }; - - usb_c1: connector@1 { - compatible = "usb-c-connector"; - reg = <1>; - label = "right"; - power-role = "dual"; - data-role = "host"; - try-power-role = "source"; - }; - }; - }; -}; - -#include -#include - -&keyboard_controller { - function-row-physmap = < - MATRIX_KEY(0x00, 0x02, 0) /* T1 */ - MATRIX_KEY(0x03, 0x02, 0) /* T2 */ - MATRIX_KEY(0x02, 0x02, 0) /* T3 */ - MATRIX_KEY(0x01, 0x02, 0) /* T4 */ - MATRIX_KEY(0x03, 0x04, 0) /* T5 */ - MATRIX_KEY(0x02, 0x04, 0) /* T6 */ - MATRIX_KEY(0x01, 0x04, 0) /* T7 */ - MATRIX_KEY(0x02, 0x09, 0) /* T8 */ - MATRIX_KEY(0x01, 0x09, 0) /* T9 */ - MATRIX_KEY(0x00, 0x04, 0) /* T10 */ - >; - linux,keymap = < - MATRIX_KEY(0x00, 0x02, KEY_BACK) - MATRIX_KEY(0x03, 0x02, KEY_REFRESH) - MATRIX_KEY(0x02, 0x02, KEY_ZOOM) - MATRIX_KEY(0x01, 0x02, KEY_SCALE) - MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) - MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) - MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) - MATRIX_KEY(0x02, 0x09, KEY_MUTE) - MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) - MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) - - CROS_STD_MAIN_KEYMAP - >; -}; - -&uart5 { - compatible = "qcom,geni-debug-uart"; - status = "okay"; -}; - -&uart7 { - status = "okay"; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "host"; -}; - -&usb_1_hsphy { - status = "okay"; - - vdda-pll-supply = <&vdd_usb_hs0_core>; - vdda33-supply = <&vdda_usb_hs0_3p1>; - vdda18-supply = <&vdda_usb_hs0_1p8>; -}; - -&usb_1_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vdda_usb_ss_dp_1p2>; - vdda-pll-supply = <&vdda_usb_ss_dp_core>; -}; - -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "host"; -}; - -&usb_2_hsphy { - status = "okay"; - - vdda-pll-supply = <&vdd_usb_hs0_core>; - vdda33-supply = <&vdda_usb_hs0_3p1>; - vdda18-supply = <&vdda_usb_hs0_1p8>; -}; - -/* PINCTRL - additions to nodes defined in sc7280.dtsi */ - -&dp_hot_plug_det { - bias-disable; -}; - -&pcie1_clkreq_n { - bias-pull-up; - drive-strength = <2>; -}; - -&qspi_cs0 { - bias-disable; -}; - -&qspi_clk { - bias-disable; -}; - -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; -}; - -&qup_uart5_rx { - drive-strength = <2>; - bias-pull-up; -}; - -&qup_uart5_tx { - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_cts { - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - bias-pull-down; -}; - -&qup_uart7_rts { - /* We'll drive RTS, so no pull */ - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_tx { - /* We'll drive TX, so no pull */ - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_rx { - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module is - * in tri-state (module powered off or not driving the - * signal yet). - */ - bias-pull-up; -}; - -&sdc1_clk { - bias-disable; - drive-strength = <16>; -}; - -&sdc1_cmd { - bias-pull-up; - drive-strength = <10>; -}; - -&sdc1_data { - bias-pull-up; - drive-strength = <10>; -}; - -&sdc1_rclk { - bias-pull-down; -}; - -&sdc2_clk { - bias-disable; - drive-strength = <16>; -}; - -&sdc2_cmd { - bias-pull-up; - drive-strength = <10>; -}; - -&sdc2_data { - bias-pull-up; - drive-strength = <10>; -}; - -/* PINCTRL - board-specific pinctrl */ - -&pm8350c_gpios { - gpio-line-names = "AP_SUSPEND", - "", - "", - "AP_BL_EN", - "", - "SD_CD_ODL", - "", - "", - "AP_BL_PWM"; - - ap_bl_en: ap-bl-en { - pins = "gpio4"; - function = "normal"; - qcom,drive-strength = ; - bias-disable; - - /* Force backlight to be disabled to match state at boot. */ - output-low; - }; -}; - -&tlmm { - gpio-line-names = "HP_I2C_SDA", /* 0 */ - "HP_I2C_SCL", - "SSD_RST_L", - "PE_WAKE_ODL", - "AP_TP_I2C_SDA", - "AP_TP_I2C_SCL", - "UF_CAM_EN", - "WF_CAM_EN", - "AP_SAR_SENSOR_SDA", - "AP_SAR_SENSOR_SCL", - - "", /* 10 */ - "", - "AP_SPI_MOSI", - "AP_SPI_MISO", - "AP_SPI_CLK", - "AP_SPI_CS0_L", - "", - "", - "EDP_HPD", - "", - - "UF_CAM_RST_L", /* 20 */ - "WF_CAM_RST_L", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "EN_PP3300_HUB", - "", - "HOST2WLAN_SOL", - "WLAN2HOST_SOL", - "BT_UART_CTS", - "BT_UART_RTS", - - "BT_UART_TXD", /* 30 */ - "BT_UART_RXD", - "AP_EC_SPI_MISO", - "AP_EC_SPI_MOSI", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "", - "", - "", - "PEN_PDCT_L", - - "IO_BRD_ID0", /* 40 */ - "IO_BRD_ID1", - "EN_FP_RAILS", - "PEN_IRQ_L", - "AP_SPI_FP_MISO", - "AP_SPI_FP_MOSI", - "AP_SPI_FP_CLK", - "AP_SPI_FP_CS_L", - "AP_H1_SPI_MISO", - "AP_H1_SPI_MOSI", - - "AP_H1_SPI_CLK", /* 50 */ - "AP_H1_SPI_CS_L", - "AP_TS_PEN_I2C_SDA", - "AP_TS_PEN_I2C_SCL", - "H1_AP_INT_ODL", - "", - "LCM_RST_1V8_L", - "AMP_EN", - "", - "DP_HOT_PLUG_DET", - - "HUB_RST_L", /* 60 */ - "FP_TO_AP_IRQ_L", - "", - "", - "UF_CAM_MCLK", - "WF_CAM_MCLK", - "IO_BRD_ID2", - "EN_PP3300_CODEC", - "EC_IN_RW_ODL", - "UF_CAM_SDA", - - "UF_CAM_SCL", /* 70 */ - "WF_CAM_SDA", - "WF_CAM_SCL", - "AP_BRD_ID0", - "AP_BRD_ID1", - "AP_BRD_ID2", - "", - "FPMCU_BOOT0", - "FP_RST_L", - "PE_CLKREQ_ODL", - - "EN_EDP_PP3300", /* 80 */ - "TS_INT_L", - "FORCE_USB_BOOT", - "WCD_RST_L", - "WLAN_EN", - "BT_EN", - "WLAN_SW_CTRL", - "PCIE0_RESET_L", - "PCIE0_CLK_REQ_L", - "PCIE0_WAKE_L", - - "AS_EN", /* 90 */ - "SD_CD_ODL", - "", - /* - * AP_FLASH_WP_L is crossystem ABI. Schematics - * call it BIOS_FLASH_WP_L. - */ - "AP_FLASH_WP_L", - "BT_WLAN_SB_CLK", - "BT_WLAN_SB_DATA", - "HP_MCLK", - "HP_BCLK", - "HP_DOUT", - "HP_DIN", - - "HP_LRCLK", /* 100 */ - "HP_IRQ", - "TP_INT_ODL", - "", - "IO_SKU_ID2", - "TS_RESET_L", - "AMP_BCLK", - "AMP_DIN", - "AMP_LRCLK", - "UIM2_DATA", - - "UIM2_CLK", /* 110 */ - "UIM2_RST", - "UIM2_PRESENT", - "UIM1_DATA", - "UIM1_CLK", - "UIM1_RST", - "", - "RFFE0_CLK", - "RFFE0_DATA/BOOT_CONFIG_0", - "RFFE1_CLK", - - "RFFE1_DATA/BOOT_CONFIG_1", /* 120 */ - "RFFE2_CLK", - "RFFE2_DATA/BOOT_CONFIG_2", - "RFFE3_CLK", - "RFFE3_DATA/BOOT_CONFIG_3", - "RFFE4_CLK", - "RFFE4_DATA", - "WCI2_LTE_COEX_RXD", - "WCI2_LTE_COEX_TXD", - "IO_SKU_ID0", - - "IO_SKU_ID1", /* 130 */ - "", - "", - "QLINK0_REQ", - "QLINK0_EN", - "QLINK0_WMSS_RESET_L", - "QLINK1_REQ", - "QLINK1_EN", - "QLINK1_WMSS_RESET_L", - "FORCED_USB_BOOT_POL", - - "", /* 140 */ - "P_SENSOR_INT_L", - "AP_EC_INT_L", - "", - "WCD_SWR_TX_CLK", - "WCD_SWR_TX_DATA_0", - "WCD_SWR_TX_DATA_1", - "WCD_SWR_RX_CLK", - "WCD_SWR_RX_DATA_0", - "WCD_SWR_RX_DATA_1", - - "", /* 150 */ - "", - "", - "", - "", - "", - "", - "", - "WCD_SWR_TX_DATA_2", - "", - - "", /* 160 */ - "", - "", - "", - "", - "", - "", - "", - "", - "", - - "", /* 170 */ - "SENS_UART_TXD", - "SENS_UART_RXD", - "", - "", - ""; - - /* - * pinctrl settings for pins that have no real owners. - */ - pinctrl-names = "default"; - pinctrl-0 = <&bios_flash_wp_l>; - - amp_en: amp-en { - pins = "gpio57"; - function = "gpio"; - bias-pull-down; - }; - - ap_ec_int_l: ap-ec-int-l { - pins = "gpio142"; - input-enable; - bias-pull-up; - }; - - bios_flash_wp_l: bios-flash-wp-l { - pins = "gpio93"; - function = "gpio"; - input-enable; - bias-disable; - }; - - bt_en: bt-en { - pins = "gpio85"; - function = "gpio"; - drive-strength = <2>; - output-low; - bias-pull-down; - }; - - en_fp_rails: en-fp-rails { - pins = "gpio42"; - drive-strength = <2>; - output-high; - bias-disable; - }; - - en_pp3300_codec: en-pp3300-codec { - pins = "gpio67"; - drive-strength = <2>; - bias-disable; - }; - - en_pp3300_dx_edp: en-pp3300-dx-edp { - pins = "gpio80"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; - - en_pp3300_hub: en-pp3300-hub { - pins = "gpio24"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; - - fp_to_ap_irq_l: fp-to-ap-irq-l { - pins = "gpio61"; - function = "gpio"; - input-enable; - /* Has external pullup */ - bias-disable; - }; - - h1_ap_int_odl: h1-ap-int-odl { - pins = "gpio54"; - function = "gpio"; - input-enable; - bias-pull-up; - }; - - hp_irq: hp-irq { - pins = "gpio101"; - function = "gpio"; - bias-pull-up; - }; - - p_sensor_int_l: p-sensor-int-l { - pins = "gpio141"; - function = "gpio"; - input-enable; - bias-pull-up; - }; - - pen_irq_l: pen-irq-l { - pins = "gpio43"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - }; - - pen_pdct_l: pen-pdct-l { - pins = "gpio39"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - }; - - qup_spi8_cs_gpio_init_high: qup-spi8-cs-gpio-init-high { - pins = "gpio35"; - output-high; - }; - - qup_spi11_cs_gpio_init_high: qup-spi11-cs-gpio-init-high { - pins = "gpio47"; - output-high; - }; - - qup_spi12_cs_gpio_init_high: qup-spi12-cs-gpio-init-high { - pins = "gpio51"; - output-high; - }; - - qup_uart7_sleep_cts: qup-uart7-sleep-cts { - pins = "gpio28"; - function = "gpio"; - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - bias-pull-down; - }; - - qup_uart7_sleep_rts: qup-uart7-sleep-rts { - pins = "gpio29"; - function = "gpio"; - /* - * Configure pull-down on RTS. As RTS is active low - * signal, pull it low to indicate the BT SoC that it - * can wakeup the system anytime from suspend state by - * pulling RX low (by sending wakeup bytes). - */ - bias-pull-down; - }; - - qup_uart7_sleep_rx: qup-uart7-sleep-rx { - pins = "gpio31"; - function = "gpio"; - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module - * is floating which may cause spurious wakeups. - */ - bias-pull-up; - }; - - qup_uart7_sleep_tx: qup-uart7-sleep-tx { - pins = "gpio30"; - function = "gpio"; - /* - * Configure pull-up on TX when it isn't actively driven - * to prevent BT SoC from receiving garbage during sleep. - */ - bias-pull-up; - }; - - sd_cd: sd-cd { - pins = "gpio91"; - function = "gpio"; - bias-pull-up; - }; - - tp_int_odl: tp-int-odl { - pins = "gpio102"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - }; - - ts_int_l: ts-int-l { - pins = "gpio81"; - function = "gpio"; - /* Has external pullup */ - bias-pull-up; - }; - - ts_reset_l: ts-reset-l { - pins = "gpio105"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - drive-strength = <2>; - }; - - uf_cam_en: uf-cam-en { - pins = "gpio6"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; - - wf_cam_en: wf-cam-en { - pins = "gpio7"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; -}; diff --git a/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts b/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts index f95273052d..b69ca09d9b 100644 --- a/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts +++ b/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts @@ -14,6 +14,36 @@ compatible = "google,herobrine", "qcom,sc7280"; }; +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +&pp3300_fp_mcu { + status = "okay"; +}; + +&pp2850_vcm_wf_cam { + status = "okay"; +}; + +&pp2850_wf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp1200_wf_cam { + status = "okay"; +}; + /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ &ap_spi_fp { @@ -70,6 +100,14 @@ ts_i2c: &i2c13 { }; }; +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + /* For nvme */ &pcie1 { status = "okay"; diff --git a/dts/src/arm64/qcom/sc7280-herobrine-villager-r0.dts b/dts/src/arm64/qcom/sc7280-herobrine-villager-r0.dts new file mode 100644 index 0000000000..d3d6ffad4e --- /dev/null +++ b/dts/src/arm64/qcom/sc7280-herobrine-villager-r0.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Google Villager (rev0+)"; + compatible = "google,villager", "qcom,sc7280"; +}; + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x20>; + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/dts/src/arm64/qcom/sc7280-herobrine.dtsi b/dts/src/arm64/qcom/sc7280-herobrine.dtsi index dc17f20796..9cb1bc8ed6 100644 --- a/dts/src/arm64/qcom/sc7280-herobrine.dtsi +++ b/dts/src/arm64/qcom/sc7280-herobrine.dtsi @@ -92,6 +92,7 @@ pinctrl-0 = <&en_pp3300_codec>; vin-supply = <&pp3300_z1>; + status = "disabled"; }; pp3300_left_in_mlb: pp3300-left-in-mlb-regulator { @@ -132,6 +133,7 @@ pinctrl-0 = <&en_fp_rails>; vin-supply = <&pp3300_z1>; + status = "disabled"; }; pp3300_hub: pp3300-hub-regulator { @@ -178,6 +180,13 @@ pinctrl-names = "default"; pinctrl-0 = <&ssd_en>; + /* + * The bootloaer may have left PCIe configured. Powering this + * off while the PCIe clocks are still running isn't great, + * so it's better to default to this regulator being on. + */ + regulator-boot-on; + vin-supply = <&pp3300_z1>; }; @@ -194,6 +203,7 @@ pinctrl-0 = <&wf_cam_en>; vin-supply = <&pp3300_z1>; + status = "disabled"; }; pp2850_wf_cam: pp2850-wf-cam-regulator { @@ -214,6 +224,7 @@ */ vin-supply = <&pp3300_z1>; + status = "disabled"; }; pp1800_fp: pp1800-fp-regulator { @@ -258,6 +269,7 @@ */ vin-supply = <&vreg_l19b_s0>; + status = "disabled"; }; pp1200_wf_cam: pp1200-wf-cam-regulator { @@ -278,6 +290,7 @@ */ vin-supply = <&pp3300_z1>; + status = "disabled"; }; /* BOARD-SPECIFIC TOP LEVEL NODES */ @@ -295,7 +308,10 @@ }; /* - * BOARD-LOCAL NAMES FOR REGULATORS THAT CONNECT TO QCARD + * ADJUSTMENTS TO QCARD REGULATORS + * + * Mostly this is just board-local names for regulators that come from + * Qcard, but this also has some minor regulator overrides. * * Names are only listed here if regulators go somewhere other than a * testpoint. @@ -339,8 +355,60 @@ vreg_edp_bl: &ppvar_sys {}; ts_avdd: &pp3300_left_in_mlb {}; vreg_edp_3p3: &pp3300_left_in_mlb {}; +/* Regulator overrides from Qcard */ + +/* + * Herobrine boards only use l2c to power an external audio codec (like + * alc5682) and we want that to be at 1.8V, not at some slightly lower voltage. + */ +&vreg_l2c_1p8 { + regulator-min-microvolt = <1800000>; +}; + /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ +&edp_panel { + /* Our board provides power to the qcard for the eDP panel. */ + power-supply = <&vreg_edp_3p3>; +}; + +ap_sar_sensor_i2c: &i2c1 { + clock-frequency = <400000>; + status = "disabled"; + + ap_sar_sensor0: proximity@28 { + compatible = "semtech,sx9324"; + reg = <0x28>; + #io-channel-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sar0_irq_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <141 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&pp1800_prox>; + + label = "proximity-wifi-lte0"; + status = "disabled"; + }; + + ap_sar_sensor1: proximity@2c { + compatible = "semtech,sx9324"; + reg = <0x2c>; + #io-channel-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sar1_irq_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <140 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&pp1800_prox>; + + label = "proximity-wifi-lte1"; + status = "disabled"; + }; +}; + ap_i2c_tpm: &i2c14 { status = "okay"; clock-frequency = <400000>; @@ -357,6 +425,14 @@ ap_i2c_tpm: &i2c14 { }; }; +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + /* NVMe drive, enabled on a per-board basis */ &pcie1 { pinctrl-names = "default"; @@ -366,6 +442,17 @@ ap_i2c_tpm: &i2c14 { vddpe-3v3-supply = <&pp3300_ssd>; }; +&pm8350c_pwm { + status = "okay"; +}; + +&pm8350c_pwm_backlight { + status = "okay"; + + /* Our board provides power to the qcard for the backlight */ + power-supply = <&vreg_edp_bl>; +}; + &pmk8350_rtc { status = "disabled"; }; @@ -677,7 +764,6 @@ ap_ec_spi: &spi10 { function = "gpio"; bias-disable; drive-strength = <2>; - output-high; }; fp_to_ap_irq_l: fp-to-ap-irq-l { @@ -691,7 +777,6 @@ ap_ec_spi: &spi10 { pins = "gpio68"; function = "gpio"; bias-disable; - output-low; }; gsc_ap_int_odl: gsc-ap-int-odl { @@ -741,7 +826,7 @@ ap_ec_spi: &spi10 { bias-pull-up; }; - sar1_irq_odl: sar0-irq-odl { + sar1_irq_odl: sar1-irq-odl { pins = "gpio140"; function = "gpio"; bias-pull-up; diff --git a/dts/src/arm64/qcom/sc7280-idp.dts b/dts/src/arm64/qcom/sc7280-idp.dts index a7be133a78..6d3ff80582 100644 --- a/dts/src/arm64/qcom/sc7280-idp.dts +++ b/dts/src/arm64/qcom/sc7280-idp.dts @@ -90,7 +90,7 @@ }; &usb_2_dwc3 { - dr_mode = "host"; + dr_mode = "otg"; }; &usb_2_hsphy { diff --git a/dts/src/arm64/qcom/sc7280-idp.dtsi b/dts/src/arm64/qcom/sc7280-idp.dtsi index ecbf2b89d8..5eb668991e 100644 --- a/dts/src/arm64/qcom/sc7280-idp.dtsi +++ b/dts/src/arm64/qcom/sc7280-idp.dtsi @@ -233,6 +233,14 @@ }; }; +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + &ipa { status = "okay"; modem-init; @@ -400,10 +408,13 @@ &qup_uart7_cts { /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. */ - bias-pull-down; + bias-bus-hold; }; &qup_uart7_rts { @@ -495,10 +506,13 @@ pins = "gpio28"; function = "gpio"; /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. */ - bias-pull-down; + bias-bus-hold; }; qup_uart7_sleep_rts: qup-uart7-sleep-rts { @@ -547,3 +561,13 @@ }; }; +&remoteproc_wpss { + status = "okay"; +}; + +&wifi { + status = "okay"; + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; +}; diff --git a/dts/src/arm64/qcom/sc7280-idp2.dts b/dts/src/arm64/qcom/sc7280-idp2.dts index 73b9911dd8..d4f7cab170 100644 --- a/dts/src/arm64/qcom/sc7280-idp2.dts +++ b/dts/src/arm64/qcom/sc7280-idp2.dts @@ -34,3 +34,7 @@ &nvme_3v3_regulator { gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; }; + +&pm8350c_pwm { + status = "okay"; +}; diff --git a/dts/src/arm64/qcom/sc7280-qcard.dtsi b/dts/src/arm64/qcom/sc7280-qcard.dtsi index b833ba1e8f..d59002d449 100644 --- a/dts/src/arm64/qcom/sc7280-qcard.dtsi +++ b/dts/src/arm64/qcom/sc7280-qcard.dtsi @@ -29,6 +29,16 @@ serial0 = &uart5; serial1 = &uart7; }; + + pm8350c_pwm_backlight: backlight { + compatible = "pwm-backlight"; + status = "disabled"; + + enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_edp_bl_en>; + pwms = <&pm8350c_pwm 3 65535>; + }; }; &apps_rsc { @@ -293,11 +303,50 @@ modem-init; }; +/* NOTE: Not all Qcards have eDP connector stuffed */ +&mdss_edp { + vdda-0p9-supply = <&vdd_a_edp_0_0p9>; + vdda-1p2-supply = <&vdd_a_edp_0_1p2>; + + aux-bus { + edp_panel: panel { + compatible = "edp-panel"; + + backlight = <&pm8350c_pwm_backlight>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + edp_panel_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + }; + }; +}; + +&mdss_edp_out { + remote-endpoint = <&edp_panel_in>; +}; + +&mdss_edp_phy { + vdda-pll-supply = <&vdd_a_edp_0_0p9>; + vdda-phy-supply = <&vdd_a_edp_0_1p2>; +}; + &pcie1_phy { vdda-phy-supply = <&vreg_l10c_0p88>; vdda-pll-supply = <&vreg_l6b_1p2>; }; +&pm8350c_pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_edp_bl_pwm>; +}; + &pmk8350_vadc { pmk8350-die-temp@3 { reg = ; @@ -383,6 +432,11 @@ mos_bt_uart: &uart7 { * baseboard or board device tree, not here. */ +/* No external pull for eDP HPD, so set the internal one. */ +&edp_hot_plug_det { + bias-pull-down; +}; + /* * For ts_i2c * @@ -398,8 +452,14 @@ mos_bt_uart: &uart7 { /* For mos_bt_uart */ &qup_uart7_cts { - /* Configure a pull-down on CTS to match the pull of the Bluetooth module. */ - bias-pull-down; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; }; /* For mos_bt_uart */ @@ -490,10 +550,13 @@ mos_bt_uart: &uart7 { pins = "gpio28"; function = "gpio"; /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. */ - bias-pull-down; + bias-bus-hold; }; /* For mos_bt_uart */ diff --git a/dts/src/arm64/qcom/sc7280.dtsi b/dts/src/arm64/qcom/sc7280.dtsi index f0b64be63c..e66fc67de2 100644 --- a/dts/src/arm64/qcom/sc7280.dtsi +++ b/dts/src/arm64/qcom/sc7280.dtsi @@ -8,8 +8,11 @@ #include #include #include +#include +#include #include #include +#include #include #include #include @@ -85,6 +88,11 @@ #size-cells = <2>; ranges; + wlan_ce_mem: memory@4cd000 { + no-map; + reg = <0x0 0x004cd000 0x0 0x1000>; + }; + hyp_mem: memory@80000000 { reg = <0x0 0x80000000 0x0 0x600000>; no-map; @@ -842,6 +850,11 @@ power-domains = <&rpmhpd SC7280_MX>; #address-cells = <1>; #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@1e9 { + reg = <0x1e9 0x2>; + bits = <5 8>; + }; }; sdhc_1: sdhci@7c4000 { @@ -881,6 +894,8 @@ mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; + resets = <&gcc GCC_SDCC1_BCR>; + sdhc1_opp_table: opp-table { compatible = "operating-points-v2"; @@ -901,6 +916,28 @@ }; + gpi_dma0: dma-controller@900000 { + #dma-cells = <3>; + compatible = "qcom,sc7280-gpi-dma"; + reg = <0 0x00900000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x7f>; + iommus = <&apps_smmu 0x0136 0x0>; + status = "disabled"; + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x009c0000 0 0x2000>; @@ -928,6 +965,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -946,6 +986,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -980,6 +1023,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -998,6 +1044,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1032,6 +1081,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1050,6 +1102,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1084,6 +1139,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1102,6 +1160,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1136,6 +1197,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1154,6 +1218,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1188,6 +1255,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1206,6 +1276,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1240,6 +1313,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1258,6 +1334,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1292,6 +1371,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1310,6 +1392,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1330,6 +1415,28 @@ }; }; + gpi_dma1: dma-controller@a00000 { + #dma-cells = <3>; + compatible = "qcom,sc7280-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x1e>; + iommus = <&apps_smmu 0x56 0x0>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x00ac0000 0 0x2000>; @@ -1357,6 +1464,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1375,6 +1485,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1409,6 +1522,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1427,6 +1543,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1461,6 +1580,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1479,6 +1601,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1513,6 +1638,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1531,6 +1659,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1565,6 +1696,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1583,6 +1717,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1617,6 +1754,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1635,6 +1775,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1669,6 +1812,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1687,6 +1833,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1721,6 +1870,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1739,6 +1891,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1808,6 +1963,47 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + wifi: wifi@17a10040 { + compatible = "qcom,wcn6750-wifi"; + reg = <0 0x17a10040 0 0x0>; + iommus = <&apps_smmu 0x1c00 0x1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + qcom,rproc = <&remoteproc_wpss>; + memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; + status = "disabled"; + }; + pcie1: pci@1c08000 { compatible = "qcom,pcie-sc7280"; reg = <0 0x01c08000 0 0x3000>, @@ -1903,7 +2099,7 @@ status = "disabled"; - pcie1_lane: lanes@1c0e200 { + pcie1_lane: phy@1c0e200 { reg = <0 0x01c0e200 0 0x170>, <0 0x01c0e400 0 0x200>, <0 0x01c0ea00 0 0x1f0>, @@ -1980,6 +2176,47 @@ #clock-cells = <1>; }; + lpass_audiocc: clock-controller@3300000 { + compatible = "qcom,sc7280-lpassaudiocc"; + reg = <0 0x03300000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; + clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; + power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + lpass_aon: clock-controller@3380000 { + compatible = "qcom,sc7280-lpassaoncc"; + reg = <0 0x03380000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&lpasscore LPASS_CORE_CC_CORE_CLK>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "iface"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + lpasscore: clock-controller@3900000 { + compatible = "qcom,sc7280-lpasscorecc"; + reg = <0 0x03900000 0 0x50000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + lpass_hm: clock-controller@3c00000 { + compatible = "qcom,sc7280-lpasshm"; + reg = <0 0x3c00000 0 0x28>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + lpass_ag_noc: interconnect@3c40000 { reg = <0 0x03c40000 0 0xf080>; compatible = "qcom,sc7280-lpass-ag-noc"; @@ -2003,6 +2240,9 @@ interconnect-names = "gfx-mem"; #cooling-cells = <2>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2010,18 +2250,56 @@ opp-hz = /bits/ 64 <315000000>; opp-level = ; opp-peak-kBps = <1804000>; + opp-supported-hw = <0x03>; }; opp-450000000 { opp-hz = /bits/ 64 <450000000>; opp-level = ; opp-peak-kBps = <4068000>; + opp-supported-hw = <0x03>; }; opp-550000000 { opp-hz = /bits/ 64 <550000000>; opp-level = ; opp-peak-kBps = <6832000>; + opp-supported-hw = <0x03>; + }; + + opp-608000000 { + opp-hz = /bits/ 64 <608000000>; + opp-level = ; + opp-peak-kBps = <8368000>; + opp-supported-hw = <0x02>; + }; + + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + + opp-812000000 { + opp-hz = /bits/ 64 <812000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + + opp-840000000 { + opp-hz = /bits/ 64 <840000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; }; }; }; @@ -2686,6 +2964,8 @@ qcom,dll-config = <0x0007642c>; + resets = <&gcc GCC_SDCC2_BCR>; + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2789,10 +3069,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SEC_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface","mock_utmi", - "sleep"; + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>; @@ -2822,6 +3105,12 @@ phys = <&usb_2_hsphy>; phy-names = "usb2-phy"; maximum-speed = "high-speed"; + usb-role-switch; + port { + usb2_role_switch: endpoint { + remote-endpoint = <&eud_ep>; + }; + }; }; }; @@ -2842,6 +3131,57 @@ status = "disabled"; }; + remoteproc_wpss: remoteproc@8a00000 { + compatible = "qcom,sc7280-wpss-pil"; + reg = <0 0x08a00000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>, + <&gcc GCC_WPSS_AHB_CLK>, + <&gcc GCC_WPSS_RSCP_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ahb_bdg", "ahb", + "rscp", "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MX>; + power-domain-names = "cx", "mx"; + + memory-region = <&wpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&wpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_WCSS_RESTART>, + <&pdc_reset PDC_WPSS_SYNC_RESET>; + reset-names = "restart", "pdc_sync"; + + qcom,halt-regs = <&tcsr_mutex 0x37000>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "wpss"; + qcom,remote-pid = <13>; + }; + }; + dc_noc: interconnect@90e0000 { reg = <0 0x090e0000 0 0x5080>; compatible = "qcom,sc7280-dc-noc"; @@ -2863,6 +3203,36 @@ interrupts = ; }; + eud: eud@88e0000 { + compatible = "qcom,sc7280-eud","qcom,eud"; + reg = <0 0x88e0000 0 0x2000>, + <0 0x88e2000 0 0x1000>; + interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; + ports { + port@0 { + eud_ep: endpoint { + remote-endpoint = <&usb2_role_switch>; + }; + }; + port@1 { + eud_con: endpoint { + remote-endpoint = <&con_eud>; + }; + }; + }; + }; + + eud_typec: connector { + compatible = "usb-c-connector"; + ports { + port@0 { + con_eud: endpoint { + remote-endpoint = <&eud_con>; + }; + }; + }; + }; + nsp_noc: interconnect@a0c0000 { reg = <0 0x0a0c0000 0 0x10000>; compatible = "qcom,sc7280-nsp-noc"; @@ -2882,21 +3252,26 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; @@ -2916,6 +3291,7 @@ phys = <&usb_1_hsphy>, <&usb_1_ssphy>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; + wakeup-source; }; }; @@ -3296,7 +3672,7 @@ port@1 { reg = <1>; - edp_out: endpoint { }; + mdss_edp_out: endpoint { }; }; }; diff --git a/dts/src/arm64/qcom/sdm630.dtsi b/dts/src/arm64/qcom/sdm630.dtsi index 240293592e..b72e8e6c52 100644 --- a/dts/src/arm64/qcom/sdm630.dtsi +++ b/dts/src/arm64/qcom/sdm630.dtsi @@ -1215,11 +1215,15 @@ clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>, <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_AGGRE2_USB3_AXI_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "bus", - "mock_utmi", "sleep"; + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "bus"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>, @@ -1453,7 +1457,7 @@ reg-names = "mdp_phys"; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; assigned-clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_VSYNC_CLK>; @@ -1530,7 +1534,7 @@ power-domains = <&rpmpd SDM660_VDDCX>; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; diff --git a/dts/src/arm64/qcom/sdm660.dtsi b/dts/src/arm64/qcom/sdm660.dtsi index eccf6fde16..1d748c5305 100644 --- a/dts/src/arm64/qcom/sdm660.dtsi +++ b/dts/src/arm64/qcom/sdm660.dtsi @@ -163,7 +163,7 @@ power-domains = <&rpmpd SDM660_VDDCX>; interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>; assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; diff --git a/dts/src/arm64/qcom/sdm845-db845c.dts b/dts/src/arm64/qcom/sdm845-db845c.dts index 28fe45c5d5..194ebeb325 100644 --- a/dts/src/arm64/qcom/sdm845-db845c.dts +++ b/dts/src/arm64/qcom/sdm845-db845c.dts @@ -28,6 +28,13 @@ stdout-path = "serial0:115200n8"; }; + /* Fixed crystal oscillator dedicated to MCP2517FD */ + clk40M: can-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + dc12v: dc12v-regulator { compatible = "regulator-fixed"; regulator-name = "DC12V"; @@ -746,6 +753,23 @@ }; }; +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; + + can@0 { + compatible = "microchip,mcp2517fd"; + reg = <0>; + clocks = <&clk40M>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; +}; + &spi2 { /* On Low speed expansion */ label = "LS-SPI0"; @@ -1051,6 +1075,7 @@ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; qcom,snoc-host-cap-8bit-quirk; + qcom,ath10k-calibration-variant = "Thundercomm_DB845C"; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ @@ -1219,3 +1244,11 @@ }; }; }; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ +&qup_spi0_default { + config { + drive-strength = <6>; + bias-disable; + }; +}; diff --git a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts index 367389526b..d88dc07205 100644 --- a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts +++ b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts @@ -121,7 +121,7 @@ &adsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/adsp.mdt"; + firmware-name = "qcom/sdm845/beryllium/adsp.mbn"; }; &apps_rsc { @@ -185,6 +185,12 @@ regulator-initial-mode = ; }; + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + vreg_l24a_3p075: ldo24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; @@ -208,7 +214,7 @@ &cdsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/cdsp.mdt"; + firmware-name = "qcom/sdm845/beryllium/cdsp.mbn"; }; &dsi0 { @@ -218,13 +224,14 @@ panel@0 { compatible = "tianma,fhd-video"; reg = <0>; - vddi0-supply = <&vreg_l14a_1p8>; + vddio-supply = <&vreg_l14a_1p8>; vddpos-supply = <&lab>; vddneg-supply = <&ibb>; #address-cells = <1>; #size-cells = <0>; + backlight = <&pmi8998_wled>; reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; port { @@ -262,7 +269,7 @@ zap-shader { memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; + firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn"; }; }; @@ -289,7 +296,13 @@ &mss_pil { status = "okay"; - firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt"; + firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn"; +}; + +&ipa { + status = "okay"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn"; }; &pm8998_gpio { @@ -302,6 +315,17 @@ }; }; +&pmi8998_wled { + status = "okay"; + qcom,current-boost-limit = <970>; + qcom,ovp-millivolt = <29600>; + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; + qcom,switching-freq = <600>; + qcom,external-pfet; + qcom,cabc; +}; + &pm8998_pon { resin { compatible = "qcom,pm8941-resin"; @@ -541,6 +565,7 @@ vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ diff --git a/dts/src/arm64/qcom/sdm845.dtsi b/dts/src/arm64/qcom/sdm845.dtsi index b31bf62e86..0692ae0e60 100644 --- a/dts/src/arm64/qcom/sdm845.dtsi +++ b/dts/src/arm64/qcom/sdm845.dtsi @@ -200,8 +200,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -225,8 +225,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -247,8 +247,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -269,8 +269,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -292,7 +292,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; + dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -314,7 +314,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; + dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -336,7 +336,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; + dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -358,7 +358,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; + dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -2027,7 +2027,7 @@ }; pcie0: pci@1c00000 { - compatible = "qcom,pcie-sdm845", "snps,dw-pcie"; + compatible = "qcom,pcie-sdm845"; reg = <0 0x01c00000 0 0x2000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, @@ -2132,7 +2132,7 @@ }; pcie1: pci@1c08000 { - compatible = "qcom,pcie-sdm845", "snps,dw-pcie"; + compatible = "qcom,pcie-sdm845"; reg = <0 0x01c08000 0 0x2000>, <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, @@ -3844,10 +3844,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -3868,7 +3871,7 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = ; @@ -3892,10 +3895,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SEC_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>; @@ -3916,7 +3922,7 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_2_dwc3: dwc3@a800000 { + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; interrupts = ; @@ -4283,7 +4289,7 @@ power-domains = <&rpmhpd SDM845_CX>; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; ports { #address-cells = <1>; @@ -4335,7 +4341,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, @@ -4407,7 +4413,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>; clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, diff --git a/dts/src/arm64/qcom/sm6125.dtsi b/dts/src/arm64/qcom/sm6125.dtsi index e81b2a7794..135e6e0da2 100644 --- a/dts/src/arm64/qcom/sm6125.dtsi +++ b/dts/src/arm64/qcom/sm6125.dtsi @@ -481,18 +481,24 @@ }; usb3: usb@4ef8800 { - compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + compatible = "qcom,sm6125-dwc3", "qcom,dwc3"; reg = <0x04ef8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; - clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>, <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; diff --git a/dts/src/arm64/qcom/sm6350.dtsi b/dts/src/arm64/qcom/sm6350.dtsi index d7c9edff19..d4f8f33f3f 100644 --- a/dts/src/arm64/qcom/sm6350.dtsi +++ b/dts/src/arm64/qcom/sm6350.dtsi @@ -517,6 +517,45 @@ }; }; + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x8c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x43 0x0>; + ranges; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + qupv3_id_1: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x9c0000 0x0 0x2000>; @@ -529,16 +568,146 @@ ranges; status = "disabled"; - uart2: serial@98c000 { + i2c6: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart9: serial@98c000 { compatible = "qcom,geni-debug-uart"; reg = <0 0x98c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_uart2_default>; + pinctrl-0 = <&qup_uart9_default>; interrupts = ; status = "disabled"; }; + + i2c10: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sm6350-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>, + <0 0x01d90000 0 0x8000>; + reg-names = "std", "ice"; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0x80 0x0>; + + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk", + "ice_core_clk"; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_QLINK_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm6350-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x18c>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x128>, + <0 0x01d87600 0 0x1fc>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x128>, + <0 0x01d87a00 0 0x1fc>; + #phy-cells = <0>; + }; }; tcsr_mutex: hwlock@1f40000 { @@ -865,10 +1034,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, @@ -974,12 +1146,54 @@ #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 157>; - qup_uart2_default: qup-uart2-default { + qup_uart9_default: qup-uart9-default { pins = "gpio25", "gpio26"; function = "qup13_f2"; drive-strength = <2>; bias-disable; }; + + qup_i2c0_default: qup-i2c0-default { + pins = "gpio0", "gpio1"; + function = "qup00"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default { + pins = "gpio45", "gpio46"; + function = "qup02"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_default: qup-i2c6-default { + pins = "gpio13", "gpio14"; + function = "qup10"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_default: qup-i2c7-default { + pins = "gpio27", "gpio28"; + function = "qup11"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c8_default: qup-i2c8-default { + pins = "gpio19", "gpio20"; + function = "qup12"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_default: qup-i2c10-default { + pins = "gpio4", "gpio5"; + function = "qup14"; + drive-strength = <2>; + bias-pull-up; + }; }; apps_smmu: iommu@15000000 { @@ -1145,6 +1359,28 @@ }; }; + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_fw_mem>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + iommus = <&apps_smmu 0x20 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + apps_rsc: rsc@18200000 { compatible = "qcom,rpmh-rsc"; label = "apps_rsc"; @@ -1217,7 +1453,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts b/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts index adb6ca2be2..61925216f5 100644 --- a/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts +++ b/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts @@ -23,7 +23,7 @@ qcom,board-id = <8 32>; aliases { - serial0 = &uart2; + serial0 = &uart9; }; chosen { @@ -296,6 +296,35 @@ firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt"; }; +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + haptics@5a { + compatible = "awinic,aw8695"; + reg = <0x5a>; + interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>; + + awinic,f0-preset = <2350>; + awinic,f0-coefficient = <260>; + awinic,f0-calibration-percent = <7>; + awinic,drive-level = <125>; + + awinic,f0-detection-play-time = <5>; + awinic,f0-detection-wait-time = <3>; + awinic,f0-detection-repeat = <2>; + awinic,f0-detection-trace = <15>; + + awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>; + awinic,tset = /bits/ 8 <0x12>; + awinic,r-spare = /bits/ 8 <0x68>; + + awinic,bemf-upper-threshold = <4104>; + awinic,bemf-lower-threshold = <1016>; + }; +}; + &mpss { status = "okay"; firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; @@ -332,10 +361,28 @@ gpio-reserved-ranges = <13 4>, <56 2>; }; -&uart2 { +&uart9 { status = "okay"; }; +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7e>; + vcc-max-microamp = <800000>; + vccq2-supply = <&vreg_l12a>; + vccq2-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l18a>; + vdda-pll-supply = <&vreg_l22a>; +}; + &usb_1 { status = "okay"; }; @@ -359,3 +406,13 @@ vdda-phy-supply = <&vreg_l22a>; vdda-pll-supply = <&vreg_l16a>; }; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l4a>; + vdd-1.8-xo-supply = <&vreg_l7a>; + vdd-1.3-rfa-supply = <&vreg_l2e>; + vdd-3.3-ch0-supply = <&vreg_l10e>; + vdd-3.3-ch1-supply = <&vreg_l11e>; +}; diff --git a/dts/src/arm64/qcom/sm8150.dtsi b/dts/src/arm64/qcom/sm8150.dtsi index 15f3bf2e7e..8ea44c4b56 100644 --- a/dts/src/arm64/qcom/sm8150.dtsi +++ b/dts/src/arm64/qcom/sm8150.dtsi @@ -915,6 +915,33 @@ status = "disabled"; }; + ethernet: ethernet@20000 { + compatible = "qcom,sm8150-ethqos"; + reg = <0x0 0x00020000 0x0 0x10000>, + <0x0 0x00036000 0x0 0x100>; + reg-names = "stmmaceth", "rgmii"; + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; + clocks = <&gcc GCC_EMAC_AXI_CLK>, + <&gcc GCC_EMAC_SLV_AHB_CLK>, + <&gcc GCC_EMAC_PTP_CLK>, + <&gcc GCC_EMAC_RGMII_CLK>; + interrupts = , + ; + interrupt-names = "macirq", "eth_lpi"; + + power-domains = <&gcc EMAC_GDSC>; + resets = <&gcc GCC_EMAC_BCR>; + + iommus = <&apps_smmu 0x3C0 0x0>; + + snps,tso; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; + + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; @@ -1746,6 +1773,203 @@ interrupts = ; }; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + iommus = <&apps_smmu 0x1d80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x1c06200 0 0x170>, /* tx */ + <0 0x1c06400 0 0x200>, /* rx */ + <0 0x1c06800 0 0x1f0>, /* pcs */ + <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1e00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, + <0x100 &apps_smmu 0x1e01 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e200 { + reg = <0 0x1c0e200 0 0x170>, /* tx0 */ + <0 0x1c0e400 0 0x200>, /* rx0 */ + <0 0x1c0ea00 0 0x1f0>, /* pcs */ + <0 0x1c0e600 0 0x170>, /* tx1 */ + <0 0x1c0e800 0 0x200>, /* rx1 */ + <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -1807,6 +2031,8 @@ clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; status = "disabled"; @@ -2048,6 +2274,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + wakeup-parent = <&pdc>; qup_i2c0_default: qup-i2c0-default { mux { @@ -2448,6 +2675,52 @@ drive-strength = <6>; bias-disable; }; + + pcie0_default_state: pcie0-default { + perst { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio36"; + function = "pci_e0"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default { + perst { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio103"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; remoteproc_mpss: remoteproc@4080000 { @@ -3270,6 +3543,51 @@ }; }; + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x6a0 0x0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&sdhc2_opp_table>; + + status = "disabled"; + + sdhc2_opp_table: sdhc2-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + dc_noc: interconnect@9160000 { compatible = "qcom,sm8150-dc-noc"; reg = <0 0x09160000 0 0x3200>; @@ -3296,11 +3614,15 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep", "xo"; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -3317,7 +3639,7 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = ; @@ -3341,11 +3663,15 @@ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep", "xo"; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>; @@ -3381,6 +3707,16 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8150-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x400>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8150-aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x400>; @@ -3744,7 +4080,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi b/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi index d63f7a9bc4..e819b5b773 100644 --- a/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi +++ b/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi @@ -441,7 +441,35 @@ status = "okay"; clock-frequency = <1000000>; - /* Dual Cirrus Logic CS35L41 amps @ 40, 41 */ + cs35l41_l: cs35l41@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; + + cs35l41_r: cs35l41@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; }; &i2c5 { diff --git a/dts/src/arm64/qcom/sm8250.dtsi b/dts/src/arm64/qcom/sm8250.dtsi index 1304b86af1..cf0c97bd5a 100644 --- a/dts/src/arm64/qcom/sm8250.dtsi +++ b/dts/src/arm64/qcom/sm8250.dtsi @@ -18,6 +18,7 @@ #include #include #include +#include #include / { @@ -2994,11 +2995,15 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep", "xo"; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -3045,11 +3050,15 @@ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep", "xo"; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>; @@ -3153,6 +3162,256 @@ #power-domain-cells = <1>; }; + cci0: cci@ac4f000 { + compatible = "qcom,sm8250-cci"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0x0ac4f000 0 0x1000>; + interrupts = ; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + pinctrl-0 = <&cci0_default>; + pinctrl-1 = <&cci0_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac50000 { + compatible = "qcom,sm8250-cci"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0x0ac50000 0 0x1000>; + interrupts = ; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + pinctrl-0 = <&cci1_default>; + pinctrl-1 = <&cci1_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + camss: camss@ac6a000 { + compatible = "qcom,sm8250-camss"; + status = "disabled"; + + reg = <0 0xac6a000 0 0x2000>, + <0 0xac6c000 0 0x2000>, + <0 0xac6e000 0 0x1000>, + <0 0xac70000 0 0x1000>, + <0 0xac72000 0 0x1000>, + <0 0xac74000 0 0x1000>, + <0 0xacb4000 0 0xd000>, + <0 0xacc3000 0 0xd000>, + <0 0xacd9000 0 0x2200>, + <0 0xacdb200 0 0x2200>; + reg-names = "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1"; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "csid0", + "csid1", + "csid2", + "csid3", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1"; + + power-domains = <&camcc IFE_0_GDSC>, + <&camcc IFE_1_GDSC>, + <&camcc TITAN_TOP_GDSC>; + + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&gcc GCC_CAMERA_SF_AXI_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>, + <&camcc CAM_CC_CORE_AHB_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY5_CLK>, + <&camcc CAM_CC_CSI5PHYTIMER_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_IFE_0_AHB_CLK>, + <&camcc CAM_CC_IFE_0_AXI_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_0_CSID_CLK>, + <&camcc CAM_CC_IFE_0_AREG_CLK>, + <&camcc CAM_CC_IFE_1_AHB_CLK>, + <&camcc CAM_CC_IFE_1_AXI_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_1_CSID_CLK>, + <&camcc CAM_CC_IFE_1_AREG_CLK>, + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_AXI_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; + + clock-names = "cam_ahb_clk", + "cam_hf_axi", + "cam_sf_axi", + "camnoc_axi", + "camnoc_axi_src", + "core_ahb", + "cpas_ahb", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "csiphy4", + "csiphy4_timer", + "csiphy5", + "csiphy5_timer", + "slow_ahb_src", + "vfe0_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_csid", + "vfe0_areg", + "vfe1_ahb", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_csid", + "vfe1_areg", + "vfe_lite_ahb", + "vfe_lite_axi", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_csid"; + + iommus = <&apps_smmu 0x800 0x400>, + <&apps_smmu 0x801 0x400>, + <&apps_smmu 0x840 0x400>, + <&apps_smmu 0x841 0x400>, + <&apps_smmu 0xc00 0x400>, + <&apps_smmu 0xc01 0x400>, + <&apps_smmu 0xc40 0x400>, + <&apps_smmu 0xc41 0x400>; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>, + <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "cam_ahb", + "cam_hf_0_mnoc", + "cam_sf_0_mnoc", + "cam_sf_icp_mnoc"; + }; + + camcc: clock-controller@ad00000 { + compatible = "qcom,sm8250-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: mdss@ae00000 { compatible = "qcom,sm8250-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -3206,7 +3465,7 @@ power-domains = <&rpmhpd SM8250_MMCX>; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; ports { #address-cells = <1>; @@ -3258,7 +3517,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, @@ -3331,7 +3590,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>; clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, @@ -3523,6 +3782,86 @@ gpio-ranges = <&tlmm 0 0 181>; wakeup-parent = <&pdc>; + cci0_default: cci0-default { + cci0_i2c0_default: cci0-i2c0-default { + /* SDA, SCL */ + pins = "gpio101", "gpio102"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + + cci0_i2c1_default: cci0-i2c1-default { + /* SDA, SCL */ + pins = "gpio103", "gpio104"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + }; + + cci0_sleep: cci0-sleep { + cci0_i2c0_sleep: cci0-i2c0-sleep { + /* SDA, SCL */ + pins = "gpio101", "gpio102"; + function = "cci_i2c"; + + drive-strength = <2>; /* 2 mA */ + bias-pull-down; + }; + + cci0_i2c1_sleep: cci0-i2c1-sleep { + /* SDA, SCL */ + pins = "gpio103", "gpio104"; + function = "cci_i2c"; + + drive-strength = <2>; /* 2 mA */ + bias-pull-down; + }; + }; + + cci1_default: cci1-default { + cci1_i2c0_default: cci1-i2c0-default { + /* SDA, SCL */ + pins = "gpio105","gpio106"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + + cci1_i2c1_default: cci1-i2c1-default { + /* SDA, SCL */ + pins = "gpio107","gpio108"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + }; + + cci1_sleep: cci1-sleep { + cci1_i2c0_sleep: cci1-i2c0-sleep { + /* SDA, SCL */ + pins = "gpio105","gpio106"; + function = "cci_i2c"; + + bias-pull-down; + drive-strength = <2>; /* 2 mA */ + }; + + cci1_i2c1_sleep: cci1-i2c1-sleep { + /* SDA, SCL */ + pins = "gpio107","gpio108"; + function = "cci_i2c"; + + bias-pull-down; + drive-strength = <2>; /* 2 mA */ + }; + }; + pri_mi2s_active: pri-mi2s-active { sclk { pins = "gpio138"; @@ -4658,7 +4997,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/dts/src/arm64/qcom/sm8350-hdk.dts b/dts/src/arm64/qcom/sm8350-hdk.dts index 1e5e9405d8..0fcf5bd88f 100644 --- a/dts/src/arm64/qcom/sm8350-hdk.dts +++ b/dts/src/arm64/qcom/sm8350-hdk.dts @@ -213,6 +213,10 @@ firmware-name = "qcom/sm8350/cdsp.mbn"; }; +&gpi_dma1 { + status = "okay"; +}; + &mpss { status = "okay"; firmware-name = "qcom/sm8350/modem.mbn"; diff --git a/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts b/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts index 9cb1d8455f..9a6faa9393 100644 --- a/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts +++ b/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts @@ -281,6 +281,14 @@ firmware-name = "qcom/sm8350/microsoft/cdsp.mbn"; }; +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + &ipa { status = "okay"; @@ -296,6 +304,10 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &slpi { status = "okay"; firmware-name = "qcom/sm8350/microsoft/slpi.mbn"; diff --git a/dts/src/arm64/qcom/sm8350.dtsi b/dts/src/arm64/qcom/sm8350.dtsi index 20f850b941..743cba9b68 100644 --- a/dts/src/arm64/qcom/sm8350.dtsi +++ b/dts/src/arm64/qcom/sm8350.dtsi @@ -6,6 +6,7 @@ #include #include #include +#include #include #include #include @@ -675,6 +676,28 @@ }; }; + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0xff>; + iommus = <&apps_smmu 0x5f6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; @@ -695,6 +718,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c14_default>; interrupts = ; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -708,6 +734,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_120mhz>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -721,6 +750,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c15_default>; interrupts = ; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -734,6 +766,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_120mhz>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -747,6 +782,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c16_default>; interrupts = ; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -760,6 +798,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -773,6 +814,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c17_default>; interrupts = ; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -786,6 +830,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -801,6 +848,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -827,6 +877,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c19_default>; interrupts = ; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -840,12 +893,37 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; + gpi_dma0: dma-controller@900000 { + compatible = "qcom,sm8350-gpi-dma"; + reg = <0 0x09800000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x5b6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x009c0000 0x0 0x6000>; @@ -866,6 +944,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c0_default>; interrupts = ; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -879,6 +960,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -892,6 +976,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c1_default>; interrupts = ; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -905,6 +992,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -918,6 +1008,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c2_default>; interrupts = ; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -931,6 +1024,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -961,6 +1057,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -974,6 +1073,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c4_default>; interrupts = ; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -987,6 +1089,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1000,6 +1105,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c5_default>; interrupts = ; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1013,6 +1121,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1026,6 +1137,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c6_default>; interrupts = ; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1039,6 +1153,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1065,6 +1182,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c7_default>; interrupts = ; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1078,12 +1198,37 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8350-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0xff>; + iommus = <&apps_smmu 0x56 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; @@ -1104,6 +1249,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c8_default>; interrupts = ; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1117,6 +1265,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_120mhz>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1130,6 +1281,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c9_default>; interrupts = ; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1143,6 +1297,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1156,6 +1313,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c10_default>; interrupts = ; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1169,6 +1329,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1182,6 +1345,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c11_default>; interrupts = ; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1195,6 +1361,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1208,6 +1377,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c12_default>; interrupts = ; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1221,6 +1393,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1234,6 +1409,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c13_default>; interrupts = ; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1247,6 +1425,9 @@ interrupts = ; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1881,7 +2062,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; @@ -1916,7 +2097,6 @@ iommus = <&apps_smmu 0xe0 0x0>; clock-names = - "ref_clk", "core_clk", "bus_aggr_clk", "iface_clk", @@ -1926,7 +2106,6 @@ "rx_lane0_sync_clk", "rx_lane1_sync_clk"; clocks = - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, <&gcc GCC_UFS_PHY_AHB_CLK>, @@ -1936,7 +2115,6 @@ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; freq-table-hz = - <75000000 300000000>, <75000000 300000000>, <0 0>, <0 0>, @@ -2271,10 +2449,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -2314,11 +2495,15 @@ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep", "xo"; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>; diff --git a/dts/src/arm64/qcom/sm8450-hdk.dts b/dts/src/arm64/qcom/sm8450-hdk.dts index f0fcb14284..4e51a9d6af 100644 --- a/dts/src/arm64/qcom/sm8450-hdk.dts +++ b/dts/src/arm64/qcom/sm8450-hdk.dts @@ -349,6 +349,47 @@ }; }; +&pcie0 { + status = "okay"; + max-link-speed = <2>; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l2h_0p91>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8450/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8450/cdsp.mbn"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8450/modem.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8450/slpi.mbn"; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/dts/src/arm64/qcom/sm8450-qrd.dts b/dts/src/arm64/qcom/sm8450-qrd.dts index 9526632d40..236e53974f 100644 --- a/dts/src/arm64/qcom/sm8450-qrd.dts +++ b/dts/src/arm64/qcom/sm8450-qrd.dts @@ -342,10 +342,32 @@ }; }; +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_2 { + status = "okay"; +}; + &remoteproc_adsp { status = "okay"; firmware-name = "qcom/sm8450/adsp.mbn"; @@ -366,6 +388,18 @@ firmware-name = "qcom/sm8450/slpi.mbn"; }; +&spi4 { + status = "okay"; +}; + +&spi18 { + status = "okay"; +}; + +&spi19 { + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <28 4>, <36 4>; }; diff --git a/dts/src/arm64/qcom/sm8450.dtsi b/dts/src/arm64/qcom/sm8450.dtsi index 934e29b9e1..7d08fad763 100644 --- a/dts/src/arm64/qcom/sm8450.dtsi +++ b/dts/src/arm64/qcom/sm8450.dtsi @@ -6,11 +6,13 @@ #include #include #include +#include #include #include #include #include #include +#include / { interrupt-parent = <&intc>; @@ -47,6 +49,7 @@ power-domains = <&CPU_PD0>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -65,6 +68,7 @@ power-domains = <&CPU_PD1>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -80,6 +84,7 @@ power-domains = <&CPU_PD2>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -95,6 +100,7 @@ power-domains = <&CPU_PD3>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -110,6 +116,7 @@ power-domains = <&CPU_PD4>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -125,6 +132,7 @@ power-domains = <&CPU_PD5>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -141,6 +149,7 @@ power-domains = <&CPU_PD6>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -156,6 +165,7 @@ power-domains = <&CPU_PD7>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -333,6 +343,25 @@ }; }; + qup_opp_table_100mhz: qup-100mhz-opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -683,815 +712,3286 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - clock-names = "bi_tcxo", "sleep_clk"; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&pcie0_lane>, + <&pcie1_lane>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "pcie_0_pipe_clk", + "pcie_1_pipe_clk", + "sleep_clk"; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8450-gpi-dma"; + #dma-cells = <3>; + reg = <0 0x800000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x496 0x0>; + status = "disabled"; }; - qupv3_id_0: geniqup@9c0000 { + qupv3_id_2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; - reg = <0x0 0x009c0000 0x0 0x2000>; + reg = <0x0 0x008c0000 0x0 0x2000>; clock-names = "m-ahb", "s-ahb"; - clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + iommus = <&apps_smmu 0x483 0x0>; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; - uart7: serial@99c000 { - compatible = "qcom,geni-debug-uart"; - reg = <0 0x0099c000 0 0x4000>; + i2c15: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00880000 0x0 0x4000>; clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; - interrupts = ; + pinctrl-0 = <&qup_i2c15_data_clk>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; - }; - qupv3_id_1: geniqup@ac0000 { - compatible = "qcom,geni-se-qup"; - reg = <0x0 0x00ac0000 0x0 0x6000>; - clock-names = "m-ahb", "s-ahb"; - clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - status = "disabled"; + spi15: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00880000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - i2c13: i2c@a94000 { + i2c16: i2c@884000 { compatible = "qcom,geni-i2c"; - reg = <0 0x00a94000 0 0x4000>; + reg = <0x0 0x00884000 0x0 0x4000>; clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c13_data_clk>; - interrupts = ; + pinctrl-0 = <&qup_i2c16_data_clk>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; - i2c14: i2c@a98000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a98000 0 0x4000>; + spi16: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00884000 0x0 0x4000>; clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + interrupts = ; pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c14_data_clk>; - interrupts = ; + pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; - }; - config_noc: interconnect@1500000 { - compatible = "qcom,sm8450-config-noc"; - reg = <0 0x01500000 0 0x1c000>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + i2c17: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00888000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - system_noc: interconnect@1680000 { - compatible = "qcom,sm8450-system-noc"; - reg = <0 0x01680000 0 0x1e200>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + spi17: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00888000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - pcie_noc: interconnect@16c0000 { - compatible = "qcom,sm8450-pcie-anoc"; - reg = <0 0x016c0000 0 0xe280>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + i2c18: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0088c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c18_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - aggre1_noc: interconnect@16e0000 { - compatible = "qcom,sm8450-aggre1-noc"; - reg = <0 0x016e0000 0 0x1c080>; - #interconnect-cells = <2>; - clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + spi18: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - aggre2_noc: interconnect@1700000 { - compatible = "qcom,sm8450-aggre2-noc"; - reg = <0 0x01700000 0 0x31080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&rpmhcc RPMH_IPA_CLK>; - }; + i2c19: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00890000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - mmss_noc: interconnect@1740000 { - compatible = "qcom,sm8450-mmss-noc"; - reg = <0 0x01740000 0 0x1f080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + spi19: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex"; - reg = <0x0 0x01f40000 0x0 0x40000>; - #hwlock-cells = <1>; - }; + i2c20: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00894000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c20_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - usb_1_hsphy: phy@88e3000 { - compatible = "qcom,sm8450-usb-hs-phy", - "qcom,usb-snps-hs-7nm-phy"; - reg = <0 0x088e3000 0 0x400>; - status = "disabled"; - #phy-cells = <0>; + spi20: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "ref"; + i2c21: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00898000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c21_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>, + <&gpi_dma2 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + spi21: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, + <&gpi_dma2 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sm8450-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x20>; + gpi_dma0: dma-controller@900000 { + compatible = "qcom,sm8450-gpi-dma"; + #dma-cells = <3>; + reg = <0 0x900000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x5b6 0x0>; status = "disabled"; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x5a3 0x0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>; + interconnect-names = "qup-core"; #address-cells = <2>; #size-cells = <2>; ranges; + status = "disabled"; - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00980000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, - <&gcc GCC_USB3_PHY_PRIM_BCR>; - reset-names = "phy", "common"; + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00980000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + power-domains = <&rpmhpd SM8450_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - #clock-cells = <1>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00984000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; }; - }; - remoteproc_slpi: remoteproc@2400000 { - compatible = "qcom,sm8450-slpi-pas"; - reg = <0 0x02400000 0 0x4000>; + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00984000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, - <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00988000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00988000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - power-domains = <&rpmhpd SM8450_LCX>, - <&rpmhpd SM8450_LMX>; - power-domain-names = "lcx", "lmx"; - memory-region = <&slpi_mem>; + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - qcom,qmp = <&aoss_qmp>; + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - qcom,smem-states = <&smp2p_slpi_out 0>; - qcom,smem-state-names = "stop"; + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00990000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - status = "disabled"; + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00990000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + power-domains = <&rpmhpd SM8450_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_SLPI - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_SLPI - IPCC_MPROC_SIGNAL_GLINK_QMP>; + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00994000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - label = "slpi"; - qcom,remote-pid = <3>; + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00994000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - }; - remoteproc_adsp: remoteproc@30000000 { - compatible = "qcom,sm8450-adsp-pas"; - reg = <0 0x030000000 0 0x100>; - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x998000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x998000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - power-domains = <&rpmhpd SM8450_LCX>, - <&rpmhpd SM8450_LMX>; - power-domain-names = "lcx", "lmx"; + uart7: serial@99c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; - memory-region = <&adsp_mem>; + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8450-gpi-dma"; + #dma-cells = <3>; + reg = <0 0xa00000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x56 0x0>; + status = "disabled"; + }; - qcom,qmp = <&aoss_qmp>; + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x43 0x0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>; + interconnect-names = "qup-core"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; - qcom,smem-states = <&smp2p_adsp_out 0>; - qcom,smem-state-names = "stop"; + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - status = "disabled"; + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - remoteproc_adsp_glink: glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP>; + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - label = "lpass"; - qcom,remote-pid = <2>; + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - }; - remoteproc_cdsp: remoteproc@32300000 { - compatible = "qcom,sm8450-cdsp-pas"; - reg = <0 0x032300000 0 0x1400000>; + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, - <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - power-domains = <&rpmhpd SM8450_CX>, - <&rpmhpd SM8450_MXC>; - power-domain-names = "cx", "mxc"; + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - memory-region = <&cdsp_mem>; + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; - qcom,qmp = <&aoss_qmp>; + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - qcom,smem-states = <&smp2p_cdsp_out 0>; - qcom,smem-state-names = "stop"; + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - status = "disabled"; + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a94000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_GLINK_QMP>; + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - label = "cdsp"; - qcom,remote-pid = <5>; + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a98000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; }; - remoteproc_mpss: remoteproc@4080000 { - compatible = "qcom,sm8450-mpss-pas"; - reg = <0x0 0x04080000 0x0 0x4040>; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8450-pcie0"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; - interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, - <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, - <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", - "stop-ack", "shutdown-ack"; + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, + <&pcie0_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + iommus = <&apps_smmu 0x1c00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x1c06e00 0 0x200>, /* tx */ + <0 0x1c07000 0 0x200>, /* rx */ + <0 0x1c06200 0 0x200>, /* pcs */ + <0 0x1c06600 0 0x200>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8450-pcie1"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre1"; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>; + enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0f000 { + compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy"; + reg = <0 0x01c0f000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e000 { + reg = <0 0x1c0e000 0 0x200>, /* tx */ + <0 0x1c0e200 0 0x300>, /* rx */ + <0 0x1c0f200 0 0x200>, /* pcs */ + <0 0x1c0e800 0 0x200>, /* tx */ + <0 0x1c0ea00 0 0x300>, /* rx */ + <0 0x1c0f400 0 0xc00>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sm8450-config-noc"; + reg = <0 0x01500000 0 0x1c000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8450-system-noc"; + reg = <0 0x01680000 0 0x1e200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,sm8450-pcie-anoc"; + reg = <0 0x016c0000 0 0xe280>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8450-aggre1-noc"; + reg = <0 0x016e0000 0 0x1c080>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8450-aggre2-noc"; + reg = <0 0x01700000 0 0x31080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&rpmhcc RPMH_IPA_CLK>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm8450-mmss-noc"; + reg = <0 0x01740000 0 0x1f080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8450-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sm8450-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x20>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + remoteproc_slpi: remoteproc@2400000 { + compatible = "qcom,sm8450-slpi-pas"; + reg = <0 0x02400000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 0>, - <&rpmhpd 12>; - power-domain-names = "cx", "mss"; + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; + }; + }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sm8450-adsp-pas"; + reg = <0 0x030000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; + }; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,sm8450-cdsp-pas"; + reg = <0 0x032300000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_CX>, + <&rpmhpd SM8450_MXC>; + power-domain-names = "cx", "mxc"; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2161 0x0400>, + <&apps_smmu 0x1021 0x1420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2162 0x0400>, + <&apps_smmu 0x1022 0x1420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2163 0x0400>, + <&apps_smmu 0x1023 0x1420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2164 0x0400>, + <&apps_smmu 0x1024 0x1420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2165 0x0400>, + <&apps_smmu 0x1025 0x1420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2166 0x0400>, + <&apps_smmu 0x1026 0x1420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2167 0x0400>, + <&apps_smmu 0x1027 0x1420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2168 0x0400>, + <&apps_smmu 0x1028 0x1420>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8450-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd 0>, + <&rpmhpd 12>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + interrupts = ; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8450-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, + <94 609 31>, <125 63 1>, <126 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + ipcc: mailbox@ed18000 { + compatible = "qcom,sm8450-ipcc", "qcom,ipcc"; + reg = <0 0x0ed18000 0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8450-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + wakeup-parent = <&pdc>; + + pcie0_default_state: pcie0-default-state { + perst { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio95"; + function = "pcie0_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio98"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk { + pins = "gpio4", "gpio5"; + function = "qup1"; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk { + pins = "gpio8", "gpio9"; + function = "qup2"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk { + pins = "gpio12", "gpio13"; + function = "qup3"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk { + pins = "gpio16", "gpio17"; + function = "qup4"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk { + pins = "gpio206", "gpio207"; + function = "qup5"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk { + pins = "gpio20", "gpio21"; + function = "qup6"; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk { + pins = "gpio28", "gpio29"; + function = "qup8"; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk { + pins = "gpio32", "gpio33"; + function = "qup9"; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk { + pins = "gpio36", "gpio37"; + function = "qup10"; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk { + pins = "gpio40", "gpio41"; + function = "qup11"; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk { + pins = "gpio44", "gpio45"; + function = "qup12"; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk { + pins = "gpio48", "gpio49"; + function = "qup13"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk { + pins = "gpio52", "gpio53"; + function = "qup14"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk { + pins = "gpio56", "gpio57"; + function = "qup15"; + }; + + qup_i2c16_data_clk: qup-i2c16-data-clk { + pins = "gpio60", "gpio61"; + function = "qup16"; + }; + + qup_i2c17_data_clk: qup-i2c17-data-clk { + pins = "gpio64", "gpio65"; + function = "qup17"; + }; + + qup_i2c18_data_clk: qup-i2c18-data-clk { + pins = "gpio68", "gpio69"; + function = "qup18"; + }; + + qup_i2c19_data_clk: qup-i2c19-data-clk { + pins = "gpio72", "gpio73"; + function = "qup19"; + }; + + qup_i2c20_data_clk: qup-i2c20-data-clk { + pins = "gpio76", "gpio77"; + function = "qup20"; + }; + + qup_i2c21_data_clk: qup-i2c21-data-clk { + pins = "gpio80", "gpio81"; + function = "qup21"; + }; + + qup_spi0_cs: qup-spi0-cs { + pins = "gpio3"; + function = "qup0"; + }; + + qup_spi0_data_clk: qup-spi0-data-clk { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup0"; + }; + + qup_spi1_cs: qup-spi1-cs { + pins = "gpio7"; + function = "qup1"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk { + pins = "gpio4", "gpio5", "gpio6"; + function = "qup1"; + }; + + qup_spi2_cs: qup-spi2-cs { + pins = "gpio11"; + function = "qup2"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk { + pins = "gpio8", "gpio9", "gpio10"; + function = "qup2"; + }; + + qup_spi3_cs: qup-spi3-cs { + pins = "gpio15"; + function = "qup3"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk { + pins = "gpio12", "gpio13", "gpio14"; + function = "qup3"; + }; + + qup_spi4_cs: qup-spi4-cs { + pins = "gpio19"; + function = "qup4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data_clk: qup-spi4-data-clk { + pins = "gpio16", "gpio17", "gpio18"; + function = "qup4"; + }; + + qup_spi5_cs: qup-spi5-cs { + pins = "gpio85"; + function = "qup5"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk { + pins = "gpio206", "gpio207", "gpio84"; + function = "qup5"; + }; + + qup_spi6_cs: qup-spi6-cs { + pins = "gpio23"; + function = "qup6"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk { + pins = "gpio20", "gpio21", "gpio22"; + function = "qup6"; + }; + + qup_spi8_cs: qup-spi8-cs { + pins = "gpio31"; + function = "qup8"; + }; + + qup_spi8_data_clk: qup-spi8-data-clk { + pins = "gpio28", "gpio29", "gpio30"; + function = "qup8"; + }; + + qup_spi9_cs: qup-spi9-cs { + pins = "gpio35"; + function = "qup9"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk { + pins = "gpio32", "gpio33", "gpio34"; + function = "qup9"; + }; + + qup_spi10_cs: qup-spi10-cs { + pins = "gpio39"; + function = "qup10"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk { + pins = "gpio36", "gpio37", "gpio38"; + function = "qup10"; + }; + + qup_spi11_cs: qup-spi11-cs { + pins = "gpio43"; + function = "qup11"; + }; + + qup_spi11_data_clk: qup-spi11-data-clk { + pins = "gpio40", "gpio41", "gpio42"; + function = "qup11"; + }; + + qup_spi12_cs: qup-spi12-cs { + pins = "gpio47"; + function = "qup12"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk { + pins = "gpio44", "gpio45", "gpio46"; + function = "qup12"; + }; + + qup_spi13_cs: qup-spi13-cs { + pins = "gpio51"; + function = "qup13"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk { + pins = "gpio48", "gpio49", "gpio50"; + function = "qup13"; + }; + + qup_spi14_cs: qup-spi14-cs { + pins = "gpio55"; + function = "qup14"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk { + pins = "gpio52", "gpio53", "gpio54"; + function = "qup14"; + }; + + qup_spi15_cs: qup-spi15-cs { + pins = "gpio59"; + function = "qup15"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk { + pins = "gpio56", "gpio57", "gpio58"; + function = "qup15"; + }; + + qup_spi16_cs: qup-spi16-cs { + pins = "gpio63"; + function = "qup16"; + }; + + qup_spi16_data_clk: qup-spi16-data-clk { + pins = "gpio60", "gpio61", "gpio62"; + function = "qup16"; + }; + + qup_spi17_cs: qup-spi17-cs { + pins = "gpio67"; + function = "qup17"; + }; + + qup_spi17_data_clk: qup-spi17-data-clk { + pins = "gpio64", "gpio65", "gpio66"; + function = "qup17"; + }; + + qup_spi18_cs: qup-spi18-cs { + pins = "gpio71"; + function = "qup18"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi18_data_clk: qup-spi18-data-clk { + pins = "gpio68", "gpio69", "gpio70"; + function = "qup18"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_cs: qup-spi19-cs { + pins = "gpio75"; + function = "qup19"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_data_clk: qup-spi19-data-clk { + pins = "gpio72", "gpio73", "gpio74"; + function = "qup19"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_cs: qup-spi20-cs { + pins = "gpio79"; + function = "qup20"; + }; + + qup_spi20_data_clk: qup-spi20-data-clk { + pins = "gpio76", "gpio77", "gpio78"; + function = "qup20"; + }; + + qup_spi21_cs: qup-spi21-cs { + pins = "gpio83"; + function = "qup21"; + }; + + qup_spi21_data_clk: qup-spi21-data-clk { + pins = "gpio80", "gpio81", "gpio82"; + function = "qup21"; + }; + + qup_uart7_rx: qup-uart7-rx { + pins = "gpio26"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart7_tx: qup-uart7-tx { + pins = "gpio27"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + reg = <0x0 0x17100000 0x0 0x10000>, /* GICD */ + <0x0 0x17180000 0x0 0x200000>; /* GICR * 8 */ + interrupts = ; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg = <0x0 0x17420000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17421000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x0 0x17421000 0x0 0x1000>, + <0x0 0x17422000 0x0 0x1000>; + }; + + frame@17423000 { + frame-number = <1>; + interrupts = ; + reg = <0x0 0x17423000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17425000 { + frame-number = <2>; + interrupts = ; + reg = <0x0 0x17425000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17427000 { + frame-number = <3>; + interrupts = ; + reg = <0x0 0x17427000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17429000 { + frame-number = <4>; + interrupts = ; + reg = <0x0 0x17429000 0x0 0x1000>; + status = "disabled"; + }; + + frame@1742b000 { + frame-number = <5>; + interrupts = ; + reg = <0x0 0x1742b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@1742d000 { + frame-number = <6>; + interrupts = ; + reg = <0x0 0x1742d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>, + <0x0 0x17a30000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2", "drv-3"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , , + , ; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm8450-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8450-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>, + <0 0x17d93000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + interrupts = , + , + ; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; + #freq-domain-cells = <1>; + }; + + gem_noc: interconnect@19100000 { + compatible = "qcom,sm8450-gem-noc"; + reg = <0 0x19100000 0 0xbb800>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@19200000 { + compatible = "qcom,sm8450-llcc"; + reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = ; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8450-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xe0 0x0>; + + interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8450-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0xe10>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", "ref_aux", "qref"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_0_CLKREF_EN>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + #clock-cells = <0>; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8450-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_0_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,sm8450-nsp-noc"; + reg = <0 0x320c0000 0 0x10000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,sm8450-lpass-ag-noc"; + reg = <0 0x3c40000 0 0x17200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; + + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-middle-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + cpu7_middle_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_middle_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_middle_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; - memory-region = <&mpss_mem>; + gpu-top-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; - qcom,qmp = <&aoss_qmp>; + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; - qcom,smem-states = <&smp2p_modem_out 0>; - qcom,smem-state-names = "stop"; + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; - status = "disabled"; + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_MPSS - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_MPSS - IPCC_MPROC_SIGNAL_GLINK_QMP>; - interrupts = ; - label = "modem"; - qcom,remote-pid = <1>; + gpu0_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; }; }; - pdc: interrupt-controller@b220000 { - compatible = "qcom,sm8450-pdc", "qcom,pdc"; - reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; - qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, - <94 609 31>, <125 63 1>, <126 716 12>; - #interrupt-cells = <2>; - interrupt-parent = <&intc>; - interrupt-controller; - }; - - aoss_qmp: power-controller@c300000 { - compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; - reg = <0 0x0c300000 0 0x400>; - interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + gpu-bottom-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 15>; - #clock-cells = <0>; - }; + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; - ipcc: mailbox@ed18000 { - compatible = "qcom,sm8450-ipcc", "qcom,ipcc"; - reg = <0 0x0ed18000 0 0x1000>; - interrupts = ; - interrupt-controller; - #interrupt-cells = <3>; - #mbox-cells = <2>; - }; + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; - tlmm: pinctrl@f100000 { - compatible = "qcom,sm8450-tlmm"; - reg = <0 0x0f100000 0 0x300000>; - interrupts = ; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 211>; - wakeup-parent = <&pdc>; + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; - qup_i2c13_data_clk: qup-i2c13-data-clk { - pins = "gpio48", "gpio49"; - function = "qup13"; - drive-strength = <2>; - bias-pull-up; + gpu1_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; }; + }; - qup_i2c14_data_clk: qup-i2c14-data-clk { - pins = "gpio52", "gpio53"; - function = "qup14"; - drive-strength = <2>; - bias-pull-up; - }; + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 0>; - qup_uart7_rx: qup-uart7-rx { - pins = "gpio26"; - function = "qup7"; - drive-strength = <2>; - bias-disable; - }; + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; - qup_uart7_tx: qup-uart7-tx { - pins = "gpio27"; - function = "qup7"; - drive-strength = <2>; - bias-disable; + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; }; }; - apps_smmu: iommu@15000000 { - compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; - reg = <0 0x15000000 0 0x100000>; - #iommu-cells = <2>; - #global-interrupts = <1>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - }; + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 1>; - intc: interrupt-controller@17100000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - interrupt-controller; - #redistributor-regions = <1>; - redistributor-stride = <0x0 0x40000>; - reg = <0x0 0x17100000 0x0 0x10000>, /* GICD */ - <0x0 0x17180000 0x0 0x200000>; /* GICR * 8 */ - interrupts = ; - }; + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; - timer@17420000 { - compatible = "arm,armv7-timer-mem"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - reg = <0x0 0x17420000 0x0 0x1000>; - clock-frequency = <19200000>; + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; - frame@17421000 { - frame-number = <0>; - interrupts = , - ; - reg = <0x0 0x17421000 0x0 0x1000>, - <0x0 0x17422000 0x0 0x1000>; + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; + }; - frame@17423000 { - frame-number = <1>; - interrupts = ; - reg = <0x0 0x17423000 0x0 0x1000>; - status = "disabled"; - }; + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 2>; - frame@17425000 { - frame-number = <2>; - interrupts = ; - reg = <0x0 0x17425000 0x0 0x1000>; - status = "disabled"; - }; + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; - frame@17427000 { - frame-number = <3>; - interrupts = ; - reg = <0x0 0x17427000 0x0 0x1000>; - status = "disabled"; - }; + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; - frame@17429000 { - frame-number = <4>; - interrupts = ; - reg = <0x0 0x17429000 0x0 0x1000>; - status = "disabled"; + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; + }; - frame@1742b000 { - frame-number = <5>; - interrupts = ; - reg = <0x0 0x1742b000 0x0 0x1000>; - status = "disabled"; - }; + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 3>; - frame@1742d000 { - frame-number = <6>; - interrupts = ; - reg = <0x0 0x1742d000 0x0 0x1000>; - status = "disabled"; + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; - apps_rsc: rsc@17a00000 { - label = "apps_rsc"; - compatible = "qcom,rpmh-rsc"; - reg = <0x0 0x17a00000 0x0 0x10000>, - <0x0 0x17a10000 0x0 0x10000>, - <0x0 0x17a20000 0x0 0x10000>, - <0x0 0x17a30000 0x0 0x10000>; - reg-names = "drv-0", "drv-1", "drv-2", "drv-3"; - interrupts = , - , - ; - qcom,tcs-offset = <0xd00>; - qcom,drv-id = <2>; - qcom,tcs-config = , , - , ; + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 4>; - apps_bcm_voter: bcm-voter { - compatible = "qcom,bcm-voter"; - }; + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; - rpmhcc: clock-controller { - compatible = "qcom,sm8450-rpmh-clk"; - #clock-cells = <1>; - clock-names = "xo"; - clocks = <&xo_board>; + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; + }; - rpmhpd: power-controller { - compatible = "qcom,sm8450-rpmhpd"; - #power-domain-cells = <1>; - operating-points-v2 = <&rpmhpd_opp_table>; + cdsp0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 5>; - rpmhpd_opp_table: opp-table { - compatible = "operating-points-v2"; + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; - rpmhpd_opp_ret: opp1 { - opp-level = ; - }; + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; - rpmhpd_opp_min_svs: opp2 { - opp-level = ; - }; + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; - rpmhpd_opp_low_svs: opp3 { - opp-level = ; - }; + cdsp_0_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; - rpmhpd_opp_svs: opp4 { - opp-level = ; - }; + cdsp1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 6>; - rpmhpd_opp_svs_l1: opp5 { - opp-level = ; - }; + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; - rpmhpd_opp_nom: opp6 { - opp-level = ; - }; + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; - rpmhpd_opp_nom_l1: opp7 { - opp-level = ; - }; + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; - rpmhpd_opp_nom_l2: opp8 { - opp-level = ; - }; + cdsp_1_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; - rpmhpd_opp_turbo: opp9 { - opp-level = ; - }; + cdsp2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 7>; - rpmhpd_opp_turbo_l1: opp10 { - opp-level = ; - }; + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_2_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; }; }; }; - cpufreq_hw: cpufreq@17d91000 { - compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss"; - reg = <0 0x17d91000 0 0x1000>, - <0 0x17d92000 0 0x1000>, - <0 0x17d93000 0 0x1000>; - reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; - clock-names = "xo", "alternate"; - interrupts = , - , - ; - interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; - #freq-domain-cells = <1>; - }; + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 8>; - gem_noc: interconnect@19100000 { - compatible = "qcom,sm8450-gem-noc"; - reg = <0 0x19100000 0 0xbb800>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; }; - system-cache-controller@19200000 { - compatible = "qcom,sm8450-llcc"; - reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>; - reg-names = "llcc_base", "llcc_broadcast_base"; - interrupts = ; + mem-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 9>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + ddr_config0: ddr0-config { + temperature = <90000>; + hysteresis = <5000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; }; - ufs_mem_hc: ufshc@1d84000 { - compatible = "qcom,sm8450-ufshc", "qcom,ufshc", - "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x3000>; - interrupts = ; - phys = <&ufs_mem_phy_lanes>; - phy-names = "ufsphy"; - lanes-per-direction = <2>; - #reset-cells = <1>; - resets = <&gcc GCC_UFS_PHY_BCR>; - reset-names = "rst"; + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 10>; - power-domains = <&gcc UFS_PHY_GDSC>; + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; - iommus = <&apps_smmu 0xe0 0x0>; + mdmss0_config0: mdmss0-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; - interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>; - interconnect-names = "ufs-ddr", "cpu-ufs"; - clock-names = - "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; - clocks = - <&gcc GCC_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_UFS_PHY_AHB_CLK>, - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; - freq-table-hz = - <75000000 300000000>, - <0 0>, - <0 0>, - <75000000 300000000>, - <75000000 300000000>, - <0 0>, - <0 0>, - <0 0>; - status = "disabled"; + mdmss0_config1: mdmss0-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; }; - ufs_mem_phy: phy@1d87000 { - compatible = "qcom,sm8450-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0xe10>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clock-names = "ref", "ref_aux", "qref"; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, - <&gcc GCC_UFS_0_CLKREF_EN>; + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 11>; - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; - status = "disabled"; + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; - ufs_mem_phy_lanes: lanes@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; - #phy-cells = <0>; - #clock-cells = <0>; + mdmss1_config0: mdmss1-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss1_config1: mdmss1-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; }; }; - usb_1: usb@a6f8800 { - compatible = "qcom,sm8450-dwc3", "qcom,dwc3"; - reg = <0 0x0a6f8800 0 0x400>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + modem2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 12>; - clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB3_0_CLKREF_EN>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep", "xo"; + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; + mdmss2_config0: mdmss2-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; - interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, - <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + mdmss2_config1: mdmss2-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; - power-domains = <&gcc USB30_PRIM_GDSC>; + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; - resets = <&gcc GCC_USB30_PRIM_BCR>; + modem3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 13>; - usb_1_dwc3: usb@a600000 { - compatible = "snps,dwc3"; - reg = <0 0x0a600000 0 0xcd00>; - interrupts = ; - iommus = <&apps_smmu 0x0 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; - phy-names = "usb2-phy", "usb3-phy"; + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss3_config0: mdmss3-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss3_config1: mdmss3-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; }; }; - nsp_noc: interconnect@320c0000 { - compatible = "qcom,sm8450-nsp-noc"; - reg = <0 0x320c0000 0 0x10000>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; }; - lpass_ag_noc: interconnect@3c40000 { - compatible = "qcom,sm8450-lpass-ag-noc"; - reg = <0 0x3c40000 0 0x17200>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; + camera1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; }; }; diff --git a/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi b/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi index 5ad6cd1864..142e7ffbd2 100644 --- a/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi +++ b/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi @@ -272,8 +272,14 @@ status = "okay"; }; -&du_out_rgb { - remote-endpoint = <&rgb_panel>; +&du { + ports { + port@0 { + du_out_rgb: endpoint { + remote-endpoint = <&rgb_panel>; + }; + }; + }; }; &ehci0 { diff --git a/dts/src/arm64/renesas/draak.dtsi b/dts/src/arm64/renesas/draak.dtsi index eb0327c0df..7231f820d6 100644 --- a/dts/src/arm64/renesas/draak.dtsi +++ b/dts/src/arm64/renesas/draak.dtsi @@ -285,7 +285,7 @@ ports { port@0 { - endpoint { + du_out_rgb: endpoint { remote-endpoint = <&adv7123_in>; }; }; @@ -541,6 +541,12 @@ function = "pwm1"; }; + rpc_pins: rpc { + groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset", + "rpc_int"; + function = "rpc"; + }; + scif2_pins: scif2 { groups = "scif2_data"; function = "scif2"; @@ -630,6 +636,58 @@ }; }; +&rpc { + pinctrl-0 = <&rpc_pins>; + pinctrl-names = "default"; + + /* Left disabled. To be enabled by firmware when unlocked. */ + + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + bl2@40000 { + reg = <0x00040000 0x140000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x040000>; + read-only; + }; + tee@200000 { + reg = <0x00200000 0x440000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x100000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/dts/src/arm64/renesas/ebisu.dtsi b/dts/src/arm64/renesas/ebisu.dtsi index 67231c8576..72f359efa2 100644 --- a/dts/src/arm64/renesas/ebisu.dtsi +++ b/dts/src/arm64/renesas/ebisu.dtsi @@ -356,7 +356,7 @@ ports { port@0 { - endpoint { + du_out_rgb: endpoint { remote-endpoint = <&adv7123_in>; }; }; @@ -600,6 +600,12 @@ function = "pwm5"; }; + rpc_pins: rpc { + groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset", + "rpc_int"; + function = "rpc"; + }; + scif2_pins: scif2 { groups = "scif2_data_a"; function = "scif2"; @@ -711,6 +717,58 @@ }; +&rpc { + pinctrl-0 = <&rpc_pins>; + pinctrl-names = "default"; + + /* Left disabled. To be enabled by firmware when unlocked. */ + + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + bl2@40000 { + reg = <0x00040000 0x140000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x040000>; + read-only; + }; + tee@200000 { + reg = <0x00200000 0x440000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x100000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/dts/src/arm64/renesas/r8a774a1.dtsi b/dts/src/arm64/renesas/r8a774a1.dtsi index 12846125a4..e7d1777662 100644 --- a/dts/src/arm64/renesas/r8a774a1.dtsi +++ b/dts/src/arm64/renesas/r8a774a1.dtsi @@ -283,6 +283,7 @@ compatible = "renesas,r8a774a1-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1178,6 +1179,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = , ; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A774A1_CLK_CANFD>, <&can_clk>; @@ -2737,8 +2739,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -2775,8 +2775,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a774b1.dtsi b/dts/src/arm64/renesas/r8a774b1.dtsi index a4b406a346..f62d95760e 100644 --- a/dts/src/arm64/renesas/r8a774b1.dtsi +++ b/dts/src/arm64/renesas/r8a774b1.dtsi @@ -156,6 +156,7 @@ compatible = "renesas,r8a774b1-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1051,6 +1052,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = , ; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A774B1_CLK_CANFD>, <&can_clk>; @@ -2582,8 +2584,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -2620,8 +2620,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a774c0-cat874.dts b/dts/src/arm64/renesas/r8a774c0-cat874.dts index 4e72e4f2ba..5a6ea08ffd 100644 --- a/dts/src/arm64/renesas/r8a774c0-cat874.dts +++ b/dts/src/arm64/renesas/r8a774c0-cat874.dts @@ -172,7 +172,7 @@ ports { port@0 { - endpoint { + du_out_rgb: endpoint { remote-endpoint = <&tda19988_in>; }; }; diff --git a/dts/src/arm64/renesas/r8a774c0.dtsi b/dts/src/arm64/renesas/r8a774c0.dtsi index e123c8d1ba..b6aeb22e88 100644 --- a/dts/src/arm64/renesas/r8a774c0.dtsi +++ b/dts/src/arm64/renesas/r8a774c0.dtsi @@ -145,6 +145,7 @@ compatible = "renesas,r8a774c0-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1008,6 +1009,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = , ; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A774C0_CLK_CANFD>, <&can_clk>; @@ -1870,8 +1872,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { @@ -1913,8 +1913,6 @@ port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; @@ -1940,8 +1938,6 @@ port@1 { reg = <1>; - lvds1_out: endpoint { - }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a774e1.dtsi b/dts/src/arm64/renesas/r8a774e1.dtsi index 989c1c00dc..8ec5909488 100644 --- a/dts/src/arm64/renesas/r8a774e1.dtsi +++ b/dts/src/arm64/renesas/r8a774e1.dtsi @@ -1280,6 +1280,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = , ; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A774E1_CLK_CANFD>, <&can_clk>; @@ -2857,8 +2858,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -2895,8 +2894,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a77951.dtsi b/dts/src/arm64/renesas/r8a77951.dtsi index 4e87e8776a..a297af22a1 100644 --- a/dts/src/arm64/renesas/r8a77951.dtsi +++ b/dts/src/arm64/renesas/r8a77951.dtsi @@ -369,6 +369,7 @@ rwdt: watchdog@e6020000 { compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1367,6 +1368,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = , ; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A7795_CLK_CANFD>, <&can_clk>; @@ -2731,6 +2733,22 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a7795-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sata: sata@ee300000 { compatible = "renesas,sata-r8a7795", "renesas,rcar-gen3-sata"; @@ -3334,8 +3352,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -3378,8 +3394,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a77960.dtsi b/dts/src/arm64/renesas/r8a77960.dtsi index 6f79da8cc8..4159c23d38 100644 --- a/dts/src/arm64/renesas/r8a77960.dtsi +++ b/dts/src/arm64/renesas/r8a77960.dtsi @@ -334,6 +334,7 @@ compatible = "renesas,r8a7796-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1239,6 +1240,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = , ; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A7796_CLK_CANFD>, <&can_clk>; @@ -2531,6 +2533,22 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a7796-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -2937,8 +2955,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -2975,8 +2991,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a77961.dtsi b/dts/src/arm64/renesas/r8a77961.dtsi index 68cbbb322a..3c744b7d0d 100644 --- a/dts/src/arm64/renesas/r8a77961.dtsi +++ b/dts/src/arm64/renesas/r8a77961.dtsi @@ -323,6 +323,7 @@ compatible = "renesas,r8a77961-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1222,6 +1223,32 @@ status = "disabled"; }; + canfd: can@e66c0000 { + compatible = "renesas,r8a77961-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = , + ; + interrupt-names = "ch_int", "g_int"; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A77961_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77961_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 8>; @@ -2375,6 +2402,22 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a77961-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -2722,8 +2765,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -2760,8 +2801,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a77965.dtsi b/dts/src/arm64/renesas/r8a77965.dtsi index 9f858af8b7..21a5e1cdd9 100644 --- a/dts/src/arm64/renesas/r8a77965.dtsi +++ b/dts/src/arm64/renesas/r8a77965.dtsi @@ -205,6 +205,7 @@ compatible = "renesas,r8a77965-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1102,6 +1103,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = , ; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A77965_CLK_CANFD>, <&can_clk>; @@ -2378,6 +2380,22 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a77965-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sata: sata@ee300000 { compatible = "renesas,sata-r8a77965", "renesas,rcar-gen3-sata"; @@ -2749,8 +2767,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -2787,8 +2803,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a77970.dtsi b/dts/src/arm64/renesas/r8a77970.dtsi index 517892cf62..2703ef3a38 100644 --- a/dts/src/arm64/renesas/r8a77970.dtsi +++ b/dts/src/arm64/renesas/r8a77970.dtsi @@ -108,6 +108,7 @@ compatible = "renesas,r8a77970-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -556,6 +557,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = , ; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A77970_CLK_CANFD>, <&can_clk>; @@ -1156,8 +1158,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { @@ -1190,8 +1190,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a77980.dtsi b/dts/src/arm64/renesas/r8a77980.dtsi index 347c068ff2..8594be72f2 100644 --- a/dts/src/arm64/renesas/r8a77980.dtsi +++ b/dts/src/arm64/renesas/r8a77980.dtsi @@ -138,6 +138,7 @@ compatible = "renesas,r8a77980-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -608,6 +609,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = , ; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A77980_CLK_CANFD>, <&can_clk>; @@ -1533,8 +1535,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { @@ -1568,8 +1568,6 @@ port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a77990.dtsi b/dts/src/arm64/renesas/r8a77990.dtsi index 7e0f1aab21..d330212026 100644 --- a/dts/src/arm64/renesas/r8a77990.dtsi +++ b/dts/src/arm64/renesas/r8a77990.dtsi @@ -171,6 +171,7 @@ compatible = "renesas,r8a77990-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1051,6 +1052,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = , ; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A77990_CLK_CANFD>, <&can_clk>; @@ -1837,6 +1839,22 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a77990-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -2031,8 +2049,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { @@ -2074,8 +2090,6 @@ port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; @@ -2101,8 +2115,6 @@ port@1 { reg = <1>; - lvds1_out: endpoint { - }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a77995.dtsi b/dts/src/arm64/renesas/r8a77995.dtsi index cac1f9467f..f040d03e0a 100644 --- a/dts/src/arm64/renesas/r8a77995.dtsi +++ b/dts/src/arm64/renesas/r8a77995.dtsi @@ -94,6 +94,7 @@ compatible = "renesas,r8a77995-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -556,6 +557,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = , ; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A77995_CLK_CANFD>, <&can_clk>; @@ -1237,6 +1239,22 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a77995-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -1350,8 +1368,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { @@ -1393,8 +1409,6 @@ port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; @@ -1420,8 +1434,6 @@ port@1 { reg = <1>; - lvds1_out: endpoint { - }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a779a0-falcon-cpu.dtsi b/dts/src/arm64/renesas/r8a779a0-falcon-cpu.dtsi index 6af3f4f4f2..53c4a26198 100644 --- a/dts/src/arm64/renesas/r8a779a0-falcon-cpu.dtsi +++ b/dts/src/arm64/renesas/r8a779a0-falcon-cpu.dtsi @@ -192,14 +192,17 @@ clock-frequency = <400000>; bridge@2c { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + compatible = "ti,sn65dsi86"; reg = <0x2c>; clocks = <&sn65dsi86_refclk>; clock-names = "refclk"; - interrupt-parent = <&gpio1>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; vccio-supply = <®_1p8v>; vpll-supply = <®_1p8v>; @@ -271,6 +274,11 @@ function = "i2c6"; }; + irq0_pins: irq0 { + groups = "intc_ex_irq0"; + function = "intc_ex"; + }; + keys_pins: keys { pins = "GP_6_18", "GP_6_19", "GP_6_20"; bias-pull-up; diff --git a/dts/src/arm64/renesas/r8a779a0-falcon.dts b/dts/src/arm64/renesas/r8a779a0-falcon.dts index e46dc9aa0a..b2e67b82ca 100644 --- a/dts/src/arm64/renesas/r8a779a0-falcon.dts +++ b/dts/src/arm64/renesas/r8a779a0-falcon.dts @@ -37,6 +37,20 @@ }; }; +&canfd { + pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; + + channel1 { + status = "okay"; + }; +}; + &i2c0 { eeprom@51 { compatible = "rohm,br24g01", "atmel,24c01"; @@ -65,4 +79,14 @@ }; }; + + canfd0_pins: canfd0 { + groups = "canfd0_data"; + function = "canfd0"; + }; + + canfd1_pins: canfd1 { + groups = "canfd1_data"; + function = "canfd1"; + }; }; diff --git a/dts/src/arm64/renesas/r8a779a0.dtsi b/dts/src/arm64/renesas/r8a779a0.dtsi index c4be288b19..b9731504b7 100644 --- a/dts/src/arm64/renesas/r8a779a0.dtsi +++ b/dts/src/arm64/renesas/r8a779a0.dtsi @@ -24,6 +24,13 @@ i2c6 = &i2c6; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -79,8 +86,9 @@ rwdt: watchdog@e6020000 { compatible = "renesas,r8a779a0-wdt", - "renesas,rcar-gen3-wdt"; + "renesas,rcar-gen4-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 907>; @@ -422,7 +430,7 @@ i2c0: i2c@e6500000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe6500000 0 0x40>; interrupts = ; clocks = <&cpg CPG_MOD 518>; @@ -438,7 +446,7 @@ i2c1: i2c@e6508000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = ; clocks = <&cpg CPG_MOD 519>; @@ -454,7 +462,7 @@ i2c2: i2c@e6510000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe6510000 0 0x40>; interrupts = ; clocks = <&cpg CPG_MOD 520>; @@ -470,7 +478,7 @@ i2c3: i2c@e66d0000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe66d0000 0 0x40>; interrupts = ; clocks = <&cpg CPG_MOD 521>; @@ -486,7 +494,7 @@ i2c4: i2c@e66d8000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe66d8000 0 0x40>; interrupts = ; clocks = <&cpg CPG_MOD 522>; @@ -502,7 +510,7 @@ i2c5: i2c@e66e0000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe66e0000 0 0x40>; interrupts = ; clocks = <&cpg CPG_MOD 523>; @@ -518,7 +526,7 @@ i2c6: i2c@e66e8000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe66e8000 0 0x40>; interrupts = ; clocks = <&cpg CPG_MOD 524>; @@ -534,7 +542,7 @@ hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a779a0", - "renesas,rcar-gen3-hscif", "renesas,hscif"; + "renesas,rcar-gen4-hscif", "renesas,hscif"; reg = <0 0xe6540000 0 0x60>; interrupts = ; clocks = <&cpg CPG_MOD 514>, @@ -550,7 +558,7 @@ hscif1: serial@e6550000 { compatible = "renesas,hscif-r8a779a0", - "renesas,rcar-gen3-hscif", "renesas,hscif"; + "renesas,rcar-gen4-hscif", "renesas,hscif"; reg = <0 0xe6550000 0 0x60>; interrupts = ; clocks = <&cpg CPG_MOD 515>, @@ -566,7 +574,7 @@ hscif2: serial@e6560000 { compatible = "renesas,hscif-r8a779a0", - "renesas,rcar-gen3-hscif", "renesas,hscif"; + "renesas,rcar-gen4-hscif", "renesas,hscif"; reg = <0 0xe6560000 0 0x60>; interrupts = ; clocks = <&cpg CPG_MOD 516>, @@ -582,7 +590,7 @@ hscif3: serial@e66a0000 { compatible = "renesas,hscif-r8a779a0", - "renesas,rcar-gen3-hscif", "renesas,hscif"; + "renesas,rcar-gen4-hscif", "renesas,hscif"; reg = <0 0xe66a0000 0 0x60>; interrupts = ; clocks = <&cpg CPG_MOD 517>, @@ -596,6 +604,55 @@ status = "disabled"; }; + canfd: can@e6660000 { + compatible = "renesas,r8a779a0-canfd"; + reg = <0 0xe6660000 0 0x8000>; + interrupts = , + ; + interrupt-names = "ch_int", "g_int"; + clocks = <&cpg CPG_MOD 328>, + <&cpg CPG_CORE R8A779A0_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A779A0_CLK_CANFD>; + assigned-clock-rates = <80000000>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + + channel2 { + status = "disabled"; + }; + + channel3 { + status = "disabled"; + }; + + channel4 { + status = "disabled"; + }; + + channel5 { + status = "disabled"; + }; + + channel6 { + status = "disabled"; + }; + + channel7 { + status = "disabled"; + }; + }; + avb0: ethernet@e6800000 { compatible = "renesas,etheravb-r8a779a0", "renesas,etheravb-rcar-gen3"; @@ -886,7 +943,7 @@ scif0: serial@e6e60000 { compatible = "renesas,scif-r8a779a0", - "renesas,rcar-gen3-scif", "renesas,scif"; + "renesas,rcar-gen4-scif", "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = ; clocks = <&cpg CPG_MOD 702>, @@ -902,7 +959,7 @@ scif1: serial@e6e68000 { compatible = "renesas,scif-r8a779a0", - "renesas,rcar-gen3-scif", "renesas,scif"; + "renesas,rcar-gen4-scif", "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = ; clocks = <&cpg CPG_MOD 703>, @@ -918,7 +975,7 @@ scif3: serial@e6c50000 { compatible = "renesas,scif-r8a779a0", - "renesas,rcar-gen3-scif", "renesas,scif"; + "renesas,rcar-gen4-scif", "renesas,scif"; reg = <0 0xe6c50000 0 64>; interrupts = ; clocks = <&cpg CPG_MOD 704>, @@ -934,7 +991,7 @@ scif4: serial@e6c40000 { compatible = "renesas,scif-r8a779a0", - "renesas,rcar-gen3-scif", "renesas,scif"; + "renesas,rcar-gen4-scif", "renesas,scif"; reg = <0 0xe6c40000 0 64>; interrupts = ; clocks = <&cpg CPG_MOD 705>, @@ -1946,7 +2003,8 @@ }; dmac1: dma-controller@e7350000 { - compatible = "renesas,dmac-r8a779a0"; + compatible = "renesas,dmac-r8a779a0", + "renesas,rcar-gen4-dmac"; reg = <0 0xe7350000 0 0x1000>, <0 0xe7300000 0 0x10000>; interrupts = , @@ -1980,7 +2038,8 @@ }; dmac2: dma-controller@e7351000 { - compatible = "renesas,dmac-r8a779a0"; + compatible = "renesas,dmac-r8a779a0", + "renesas,rcar-gen4-dmac"; reg = <0 0xe7351000 0 0x1000>, <0 0xe7310000 0 0x10000>; interrupts = , @@ -2035,7 +2094,8 @@ }; ipmmu_rt0: iommu@ee480000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xee480000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 10>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2043,7 +2103,8 @@ }; ipmmu_rt1: iommu@ee4c0000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xee4c0000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 19>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2051,7 +2112,8 @@ }; ipmmu_ds0: iommu@eed00000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed00000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 0>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2059,7 +2121,8 @@ }; ipmmu_ds1: iommu@eed40000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed40000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 1>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2067,7 +2130,8 @@ }; ipmmu_ir: iommu@eed80000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed80000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 3>; power-domains = <&sysc R8A779A0_PD_A3IR>; @@ -2075,7 +2139,8 @@ }; ipmmu_vc0: iommu@eedc0000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeedc0000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 12>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2083,7 +2148,8 @@ }; ipmmu_vi0: iommu@eee80000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeee80000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 14>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2091,7 +2157,8 @@ }; ipmmu_vi1: iommu@eeec0000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeeec0000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 15>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2099,7 +2166,8 @@ }; ipmmu_3dg: iommu@eee00000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeee00000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 6>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2107,7 +2175,8 @@ }; ipmmu_vip0: iommu@eef00000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeef00000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 5>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2115,7 +2184,8 @@ }; ipmmu_vip1: iommu@eef40000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeef40000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 11>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2123,7 +2193,8 @@ }; ipmmu_mm: iommu@eefc0000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeefc0000 0 0x20000>; interrupts = , ; diff --git a/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi b/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi index 6e07c54148..41aa8591b3 100644 --- a/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi +++ b/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi @@ -31,10 +31,30 @@ clock-frequency = <32768>; }; +&i2c4 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "cpu-board"; + reg = <0x50>; + pagesize = <8>; + }; +}; + &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; + i2c4_pins: i2c4 { + groups = "i2c4"; + function = "i2c4"; + }; + scif3_pins: scif3 { groups = "scif3_data", "scif3_ctrl"; function = "scif3"; diff --git a/dts/src/arm64/renesas/r8a779f0-spider-ethernet.dtsi b/dts/src/arm64/renesas/r8a779f0-spider-ethernet.dtsi new file mode 100644 index 0000000000..15e8d1ebf5 --- /dev/null +++ b/dts/src/arm64/renesas/r8a779f0-spider-ethernet.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Spider Ethernet sub-board + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +&i2c4 { + eeprom@52 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "ethernet-sub-board"; + reg = <0x52>; + pagesize = <8>; + }; +}; diff --git a/dts/src/arm64/renesas/r8a779f0-spider.dts b/dts/src/arm64/renesas/r8a779f0-spider.dts index f286254b41..2e3b719cc7 100644 --- a/dts/src/arm64/renesas/r8a779f0-spider.dts +++ b/dts/src/arm64/renesas/r8a779f0-spider.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "r8a779f0-spider-cpu.dtsi" +#include "r8a779f0-spider-ethernet.dtsi" / { model = "Renesas Spider CPU and Breakout boards based on r8a779f0"; @@ -20,3 +21,12 @@ stdout-path = "serial0:115200n8"; }; }; + +&i2c4 { + eeprom@51 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "breakout-board"; + reg = <0x51>; + pagesize = <8>; + }; +}; diff --git a/dts/src/arm64/renesas/r8a779f0.dtsi b/dts/src/arm64/renesas/r8a779f0.dtsi index f4e5498673..df46fb87cf 100644 --- a/dts/src/arm64/renesas/r8a779f0.dtsi +++ b/dts/src/arm64/renesas/r8a779f0.dtsi @@ -63,6 +63,7 @@ compatible = "renesas,r8a779f0-wdt", "renesas,rcar-gen4-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; resets = <&cpg 907>; @@ -75,6 +76,66 @@ <0 0xe6051000 0 0x16c>, <0 0xe6051800 0 0x16c>; }; + gpio0: gpio@e6050180 { + compatible = "renesas,gpio-r8a779f0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6050180 0 0x54>; + interrupts = ; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 0 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@e6050980 { + compatible = "renesas,gpio-r8a779f0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6050980 0 0x54>; + interrupts = ; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 32 25>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@e6051180 { + compatible = "renesas,gpio-r8a779f0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6051180 0 0x54>; + interrupts = ; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 64 17>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@e6051980 { + compatible = "renesas,gpio-r8a779f0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6051980 0 0x54>; + interrupts = ; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 96 19>; + interrupt-controller; + #interrupt-cells = <2>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a779f0-cpg-mssr"; reg = <0 0xe6150000 0 0x4000>; @@ -96,6 +157,108 @@ #power-domain-cells = <1>; }; + i2c0: i2c@e6500000 { + compatible = "renesas,i2c-r8a779f0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 518>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 518>; + dmas = <&dmac0 0x91>, <&dmac0 0x90>, + <&dmac1 0x91>, <&dmac1 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + compatible = "renesas,i2c-r8a779f0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 519>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 519>; + dmas = <&dmac0 0x93>, <&dmac0 0x92>, + <&dmac1 0x93>, <&dmac1 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + compatible = "renesas,i2c-r8a779f0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 520>; + dmas = <&dmac0 0x95>, <&dmac0 0x94>, + <&dmac1 0x95>, <&dmac1 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + compatible = "renesas,i2c-r8a779f0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 521>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 521>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>, + <&dmac1 0x97>, <&dmac1 0x96>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + compatible = "renesas,i2c-r8a779f0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 522>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>, + <&dmac1 0x99>, <&dmac1 0x98>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + compatible = "renesas,i2c-r8a779f0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>, + <&dmac1 0x9b>, <&dmac1 0x9a>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scif3: serial@e6c50000 { compatible = "renesas,scif-r8a779f0", "renesas,rcar-gen4-scif", "renesas,scif"; diff --git a/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi b/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi new file mode 100644 index 0000000000..ea4ae4b893 --- /dev/null +++ b/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the White Hawk CPU board + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include "r8a779g0.dtsi" + +/ { + model = "Renesas White Hawk CPU board"; + compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&hscif0 { + status = "okay"; +}; + +&scif_clk { + clock-frequency = <24000000>; +}; diff --git a/dts/src/arm64/renesas/r8a779g0-white-hawk.dts b/dts/src/arm64/renesas/r8a779g0-white-hawk.dts new file mode 100644 index 0000000000..bc0ac109b1 --- /dev/null +++ b/dts/src/arm64/renesas/r8a779g0-white-hawk.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the White Hawk CPU and BreakOut boards + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a779g0-white-hawk-cpu.dtsi" + +/ { + model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0"; + compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0"; + + aliases { + serial0 = &hscif0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; +}; diff --git a/dts/src/arm64/renesas/r8a779g0.dtsi b/dts/src/arm64/renesas/r8a779g0.dtsi new file mode 100644 index 0000000000..7cbb0de060 --- /dev/null +++ b/dts/src/arm64/renesas/r8a779g0.dtsi @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4H (R8A779G0) SoC + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include +#include +#include + +/ { + compatible = "renesas,r8a779g0"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a76_0: cpu@0 { + compatible = "arm,cortex-a76"; + reg = <0>; + device_type = "cpu"; + power-domains = <&sysc R8A779G0_PD_A1E0D0C0>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + pmu_a76 { + compatible = "arm,cortex-a76-pmu"; + interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a779g0-cpg-mssr"; + reg = <0 0xe6150000 0 0x4000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a779g0-rst"; + reg = <0 0xe6160000 0 0x4000>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a779g0-sysc"; + reg = <0 0xe6180000 0 0x4000>; + #power-domain-cells = <1>; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a779g0", + "renesas,rcar-gen4-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 96>; + interrupts = ; + clocks = <&cpg CPG_MOD 514>, + <&cpg CPG_CORE R8A779G0_CLK_S0D3_PER>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 514>; + status = "disabled"; + }; + + gic: interrupt-controller@f1000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1000000 0 0x20000>, + <0x0 0xf1060000 0 0x110000>; + interrupts = ; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/dts/src/arm64/renesas/r9a07g043.dtsi b/dts/src/arm64/renesas/r9a07g043.dtsi new file mode 100644 index 0000000000..b31fb713ae --- /dev/null +++ b/dts/src/arm64/renesas/r9a07g043.dtsi @@ -0,0 +1,885 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2UL SoC + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include +#include + +/ { + compatible = "renesas,r9a07g043"; + #address-cells = <2>; + #size-cells = <2>; + + audio_clk1: audio-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + + audio_clk2: audio-clk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ + extal_clk: extal-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a55"; + reg = <0>; + device_type = "cpu"; + #cooling-cells = <2>; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R9A07G043_CLK_I>; + operating-points-v2 = <&cluster0_opp>; + }; + + L3_CA55: cache-controller-0 { + compatible = "cache"; + cache-unified; + cache-size = <0x40000>; + }; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ssi0: ssi@10049c00 { + compatible = "renesas,r9a07g043-ssi", + "renesas,rz-ssi"; + reg = <0 0x10049c00 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G043_SSI0_PCLK2>, + <&cpg CPG_MOD R9A07G043_SSI0_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G043_SSI0_RST_M2_REG>; + dmas = <&dmac 0x2655>, <&dmac 0x2656>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi1: ssi@1004a000 { + compatible = "renesas,r9a07g043-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a000 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G043_SSI1_PCLK2>, + <&cpg CPG_MOD R9A07G043_SSI1_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G043_SSI1_RST_M2_REG>; + dmas = <&dmac 0x2659>, <&dmac 0x265a>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi2: ssi@1004a400 { + compatible = "renesas,r9a07g043-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a400 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G043_SSI2_PCLK2>, + <&cpg CPG_MOD R9A07G043_SSI2_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G043_SSI2_RST_M2_REG>; + dmas = <&dmac 0x265f>; + dma-names = "rt"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi3: ssi@1004a800 { + compatible = "renesas,r9a07g043-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a800 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G043_SSI3_PCLK2>, + <&cpg CPG_MOD R9A07G043_SSI3_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G043_SSI3_RST_M2_REG>; + dmas = <&dmac 0x2661>, <&dmac 0x2662>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + spi0: spi@1004ac00 { + compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz"; + reg = <0 0x1004ac00 0 0x400>; + interrupts = , + , + ; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G043_RSPI0_CLKB>; + resets = <&cpg R9A07G043_RSPI0_RST>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@1004b000 { + compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz"; + reg = <0 0x1004b000 0 0x400>; + interrupts = , + , + ; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G043_RSPI1_CLKB>; + resets = <&cpg R9A07G043_RSPI1_RST>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@1004b400 { + compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz"; + reg = <0 0x1004b400 0 0x400>; + interrupts = , + , + ; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G043_RSPI2_CLKB>; + resets = <&cpg R9A07G043_RSPI2_RST>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + scif0: serial@1004b800 { + compatible = "renesas,scif-r9a07g043", + "renesas,scif-r9a07g044"; + reg = <0 0x1004b800 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCIF0_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif1: serial@1004bc00 { + compatible = "renesas,scif-r9a07g043", + "renesas,scif-r9a07g044"; + reg = <0 0x1004bc00 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCIF1_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCIF1_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif2: serial@1004c000 { + compatible = "renesas,scif-r9a07g043", + "renesas,scif-r9a07g044"; + reg = <0 0x1004c000 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCIF2_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCIF2_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif3: serial@1004c400 { + compatible = "renesas,scif-r9a07g043", + "renesas,scif-r9a07g044"; + reg = <0 0x1004c400 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCIF3_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCIF3_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif4: serial@1004c800 { + compatible = "renesas,scif-r9a07g043", + "renesas,scif-r9a07g044"; + reg = <0 0x1004c800 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCIF4_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCIF4_RST_SYSTEM_N>; + status = "disabled"; + }; + + sci0: serial@1004d000 { + compatible = "renesas,r9a07g043-sci", "renesas,sci"; + reg = <0 0x1004d000 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "eri", "rxi", "txi", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCI0_CLKP>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCI0_RST>; + status = "disabled"; + }; + + sci1: serial@1004d400 { + compatible = "renesas,r9a07g043-sci", "renesas,sci"; + reg = <0 0x1004d400 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "eri", "rxi", "txi", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCI1_CLKP>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCI1_RST>; + status = "disabled"; + }; + + canfd: can@10050000 { + compatible = "renesas,r9a07g043-canfd", "renesas,rzg2l-canfd"; + reg = <0 0x10050000 0 0x8000>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "g_err", "g_recc", + "ch0_err", "ch0_rec", "ch0_trx", + "ch1_err", "ch1_rec", "ch1_trx"; + clocks = <&cpg CPG_MOD R9A07G043_CANFD_PCLK>, + <&cpg CPG_CORE R9A07G043_CLK_P0_DIV2>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R9A07G043_CLK_P0_DIV2>; + assigned-clock-rates = <50000000>; + resets = <&cpg R9A07G043_CANFD_RSTP_N>, + <&cpg R9A07G043_CANFD_RSTC_N>; + reset-names = "rstp_n", "rstc_n"; + power-domains = <&cpg>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + channel1 { + status = "disabled"; + }; + }; + + i2c0: i2c@10058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g043", "renesas,riic-rz"; + reg = <0 0x10058000 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G043_I2C0_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G043_I2C0_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c1: i2c@10058400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g043", "renesas,riic-rz"; + reg = <0 0x10058400 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G043_I2C1_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G043_I2C1_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c2: i2c@10058800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g043", "renesas,riic-rz"; + reg = <0 0x10058800 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G043_I2C2_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G043_I2C2_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c3: i2c@10058c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g043", "renesas,riic-rz"; + reg = <0 0x10058c00 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G043_I2C3_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G043_I2C3_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + adc: adc@10059000 { + reg = <0 0x10059000 0 0x400>; + /* place holder */ + }; + + tsu: thermal@10059400 { + compatible = "renesas,r9a07g043-tsu", + "renesas,rzg2l-tsu"; + reg = <0 0x10059400 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G043_TSU_PCLK>; + resets = <&cpg R9A07G043_TSU_PRESETN>; + power-domains = <&cpg>; + #thermal-sensor-cells = <1>; + }; + + sbc: spi@10060000 { + compatible = "renesas,r9a07g043-rpc-if", + "renesas,rzg2l-rpc-if"; + reg = <0 0x10060000 0 0x10000>, + <0 0x20000000 0 0x10000000>, + <0 0x10070000 0 0x10000>; + reg-names = "regs", "dirmap", "wbuf"; + clocks = <&cpg CPG_MOD R9A07G043_SPI_CLK2>, + <&cpg CPG_MOD R9A07G043_SPI_CLK>; + resets = <&cpg R9A07G043_SPI_RST>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + cpg: clock-controller@11010000 { + compatible = "renesas,r9a07g043-cpg"; + reg = <0 0x11010000 0 0x10000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + sysc: system-controller@11020000 { + compatible = "renesas,r9a07g043-sysc"; + reg = <0 0x11020000 0 0x10000>; + interrupts = , + , + , + ; + interrupt-names = "lpm_int", "ca55stbydone_int", + "cm33stbyr_int", "ca55_deny"; + status = "disabled"; + }; + + pinctrl: pinctrl@11030000 { + compatible = "renesas,r9a07g043-pinctrl"; + reg = <0 0x11030000 0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 152>; + clocks = <&cpg CPG_MOD R9A07G043_GPIO_HCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_GPIO_RSTN>, + <&cpg R9A07G043_GPIO_PORT_RESETN>, + <&cpg R9A07G043_GPIO_SPARE_RESETN>; + }; + + dmac: dma-controller@11820000 { + compatible = "renesas,r9a07g043-dmac", + "renesas,rz-dmac"; + reg = <0 0x11820000 0 0x10000>, + <0 0x11830000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD R9A07G043_DMAC_ACLK>, + <&cpg CPG_MOD R9A07G043_DMAC_PCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_DMAC_ARESETN>, + <&cpg R9A07G043_DMAC_RST_ASYNC>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + gic: interrupt-controller@11900000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x11900000 0 0x40000>, + <0x0 0x11940000 0 0x60000>; + interrupts = ; + }; + + sdhi0: mmc@11c00000 { + compatible = "renesas,sdhi-r9a07g043", + "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x11c00000 0 0x10000>; + interrupts = , + ; + clocks = <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK>, + <&cpg CPG_MOD R9A07G043_SDHI0_CLK_HS>, + <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK2>, + <&cpg CPG_MOD R9A07G043_SDHI0_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A07G043_SDHI0_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi1: mmc@11c10000 { + compatible = "renesas,sdhi-r9a07g043", + "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x11c10000 0 0x10000>; + interrupts = , + ; + clocks = <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK>, + <&cpg CPG_MOD R9A07G043_SDHI1_CLK_HS>, + <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK2>, + <&cpg CPG_MOD R9A07G043_SDHI1_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A07G043_SDHI1_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + eth0: ethernet@11c20000 { + compatible = "renesas,r9a07g043-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c20000 0 0x10000>; + interrupts = , + , + ; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G043_ETH0_CLK_AXI>, + <&cpg CPG_MOD R9A07G043_ETH0_CLK_CHI>, + <&cpg CPG_CORE R9A07G043_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G043_ETH0_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + eth1: ethernet@11c30000 { + compatible = "renesas,r9a07g043-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c30000 0 0x10000>; + interrupts = , + , + ; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G043_ETH1_CLK_AXI>, + <&cpg CPG_MOD R9A07G043_ETH1_CLK_CHI>, + <&cpg CPG_CORE R9A07G043_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G043_ETH1_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + phyrst: usbphy-ctrl@11c40000 { + compatible = "renesas,r9a07g043-usbphy-ctrl", + "renesas,rzg2l-usbphy-ctrl"; + reg = <0 0x11c40000 0 0x10000>; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>; + resets = <&cpg R9A07G043_USB_PRESETN>; + power-domains = <&cpg>; + #reset-cells = <1>; + status = "disabled"; + }; + + ohci0: usb@11c50000 { + compatible = "generic-ohci"; + reg = <0 0x11c50000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G043_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@11c70000 { + compatible = "generic-ohci"; + reg = <0 0x11c70000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G043_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@11c50100 { + compatible = "generic-ehci"; + reg = <0 0x11c50100 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G043_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@11c70100 { + compatible = "generic-ehci"; + reg = <0 0x11c70100 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G043_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@11c50200 { + compatible = "renesas,usb2-phy-r9a07g043", + "renesas,rzg2l-usb2-phy"; + reg = <0 0x11c50200 0 0x700>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>; + resets = <&phyrst 0>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@11c70200 { + compatible = "renesas,usb2-phy-r9a07g043", + "renesas,rzg2l-usb2-phy"; + reg = <0 0x11c70200 0 0x700>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>; + resets = <&phyrst 1>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + hsusb: usb@11c60000 { + compatible = "renesas,usbhs-r9a07g043", + "renesas,rza2-usbhs"; + reg = <0 0x11c60000 0 0x10000>; + interrupts = , + , + , + ; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2P_EXR_CPUCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G043_USB_U2P_EXL_SYSRST>; + renesas,buswait = <7>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt0: watchdog@12800800 { + compatible = "renesas,r9a07g043-wdt", + "renesas,rzg2l-wdt"; + reg = <0 0x12800800 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G043_WDT0_PCLK>, + <&cpg CPG_MOD R9A07G043_WDT0_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = , + ; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G043_WDT0_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt2: watchdog@12800400 { + compatible = "renesas,r9a07g043-wdt", + "renesas,rzg2l-wdt"; + reg = <0 0x12800400 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G043_WDT2_PCLK>, + <&cpg CPG_MOD R9A07G043_WDT2_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = , + ; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G043_WDT2_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm0: timer@12801000 { + compatible = "renesas,r9a07g043-ostm", + "renesas,ostm"; + reg = <0x0 0x12801000 0x0 0x400>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G043_OSTM0_PCLK>; + resets = <&cpg R9A07G043_OSTM0_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm1: timer@12801400 { + compatible = "renesas,r9a07g043-ostm", + "renesas,ostm"; + reg = <0x0 0x12801400 0x0 0x400>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G043_OSTM1_PCLK>; + resets = <&cpg R9A07G043_OSTM1_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm2: timer@12801800 { + compatible = "renesas,r9a07g043-ostm", + "renesas,ostm"; + reg = <0x0 0x12801800 0x0 0x400>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G043_OSTM2_PCLK>; + resets = <&cpg R9A07G043_OSTM2_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; + }; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsu 0>; + sustainable-power = <717>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 0 2>; + contribution = <1024>; + }; + }; + + trips { + sensor_crit: sensor-crit { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + + target: trip-point { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/dts/src/arm64/renesas/r9a07g043u11-smarc.dts b/dts/src/arm64/renesas/r9a07g043u11-smarc.dts new file mode 100644 index 0000000000..2d740bd420 --- /dev/null +++ b/dts/src/arm64/renesas/r9a07g043u11-smarc.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK board + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g043.dtsi" +#include "rzg2ul-smarc.dtsi" + +/ { + model = "Renesas SMARC EVK based on r9a07g043u11"; + compatible = "renesas,smarc-evk", "renesas,r9a07g043u11", "renesas,r9a07g043"; +}; + +&spi1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; diff --git a/dts/src/arm64/renesas/r9a07g044.dtsi b/dts/src/arm64/renesas/r9a07g044.dtsi index 19287cccb1..3652e51116 100644 --- a/dts/src/arm64/renesas/r9a07g044.dtsi +++ b/dts/src/arm64/renesas/r9a07g044.dtsi @@ -13,14 +13,14 @@ #address-cells = <2>; #size-cells = <2>; - audio_clk1: audio_clk1 { + audio_clk1: audio1-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by boards that provide it */ clock-frequency = <0>; }; - audio_clk2: audio_clk2 { + audio_clk2: audio2-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by boards that provide it */ @@ -28,14 +28,14 @@ }; /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { + can_clk: can-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ - extal_clk: extal { + extal_clk: extal-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board */ diff --git a/dts/src/arm64/renesas/r9a07g044c2-smarc.dts b/dts/src/arm64/renesas/r9a07g044c2-smarc.dts index 5a5cea82a5..fc34058002 100644 --- a/dts/src/arm64/renesas/r9a07g044c2-smarc.dts +++ b/dts/src/arm64/renesas/r9a07g044c2-smarc.dts @@ -13,79 +13,3 @@ model = "Renesas SMARC EVK based on r9a07g044c2"; compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044"; }; - -&ehci0 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&ehci1 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&hsusb { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&i2c0 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&i2c1 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&i2c3 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&ohci0 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&ohci1 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&phyrst { - status = "disabled"; -}; - -&spi1 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&ssi0 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&usb2_phy0 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&usb2_phy1 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; diff --git a/dts/src/arm64/renesas/r9a07g054.dtsi b/dts/src/arm64/renesas/r9a07g054.dtsi index 5d39e765c2..4d6b9d7684 100644 --- a/dts/src/arm64/renesas/r9a07g054.dtsi +++ b/dts/src/arm64/renesas/r9a07g054.dtsi @@ -13,14 +13,14 @@ #address-cells = <2>; #size-cells = <2>; - audio_clk1: audio_clk1 { + audio_clk1: audio1-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by boards that provide it */ clock-frequency = <0>; }; - audio_clk2: audio_clk2 { + audio_clk2: audio2-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by boards that provide it */ @@ -28,20 +28,47 @@ }; /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { + can_clk: can-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ - extal_clk: extal { + extal_clk: extal-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board */ clock-frequency = <0>; }; + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -65,6 +92,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A07G054_CLK_I>; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@100 { @@ -74,6 +102,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A07G054_CLK_I>; + operating-points-v2 = <&cluster0_opp>; }; L3_CA55: cache-controller-0 { @@ -83,6 +112,50 @@ }; }; + gpu_opp_table: opp-table-1 { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1100000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <1100000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <1100000>; + }; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + opp-microvolt = <1100000>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <1100000>; + }; + + opp-62500000 { + opp-hz = /bits/ 64 <62500000>; + opp-microvolt = <1100000>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + opp-microvolt = <1100000>; + }; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -96,16 +169,135 @@ ranges; ssi0: ssi@10049c00 { + compatible = "renesas,r9a07g054-ssi", + "renesas,rz-ssi"; reg = <0 0x10049c00 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G054_SSI0_PCLK2>, + <&cpg CPG_MOD R9A07G054_SSI0_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G054_SSI0_RST_M2_REG>; + dmas = <&dmac 0x2655>, <&dmac 0x2656>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; #sound-dai-cells = <0>; - /* place holder */ + status = "disabled"; + }; + + ssi1: ssi@1004a000 { + compatible = "renesas,r9a07g054-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a000 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G054_SSI1_PCLK2>, + <&cpg CPG_MOD R9A07G054_SSI1_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G054_SSI1_RST_M2_REG>; + dmas = <&dmac 0x2659>, <&dmac 0x265a>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi2: ssi@1004a400 { + compatible = "renesas,r9a07g054-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a400 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G054_SSI2_PCLK2>, + <&cpg CPG_MOD R9A07G054_SSI2_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G054_SSI2_RST_M2_REG>; + dmas = <&dmac 0x265f>; + dma-names = "rt"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi3: ssi@1004a800 { + compatible = "renesas,r9a07g054-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a800 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G054_SSI3_PCLK2>, + <&cpg CPG_MOD R9A07G054_SSI3_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G054_SSI3_RST_M2_REG>; + dmas = <&dmac 0x2661>, <&dmac 0x2662>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + spi0: spi@1004ac00 { + compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz"; + reg = <0 0x1004ac00 0 0x400>; + interrupts = , + , + ; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G054_RSPI0_CLKB>; + resets = <&cpg R9A07G054_RSPI0_RST>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; spi1: spi@1004b000 { + compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz"; reg = <0 0x1004b000 0 0x400>; + interrupts = , + , + ; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G054_RSPI1_CLKB>; + resets = <&cpg R9A07G054_RSPI1_RST>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@1004b400 { + compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz"; + reg = <0 0x1004b400 0 0x400>; + interrupts = , + , + ; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G054_RSPI2_CLKB>; + resets = <&cpg R9A07G054_RSPI2_RST>; + power-domains = <&cpg>; + num-cs = <1>; #address-cells = <1>; #size-cells = <0>; - /* place holder */ + status = "disabled"; }; scif0: serial@1004b800 { @@ -234,43 +426,194 @@ }; canfd: can@10050000 { + compatible = "renesas,r9a07g054-canfd", "renesas,rzg2l-canfd"; reg = <0 0x10050000 0 0x8000>; - /* place holder */ + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "g_err", "g_recc", + "ch0_err", "ch0_rec", "ch0_trx", + "ch1_err", "ch1_rec", "ch1_trx"; + clocks = <&cpg CPG_MOD R9A07G054_CANFD_PCLK>, + <&cpg CPG_CORE R9A07G054_CLK_P0_DIV2>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R9A07G054_CLK_P0_DIV2>; + assigned-clock-rates = <50000000>; + resets = <&cpg R9A07G054_CANFD_RSTP_N>, + <&cpg R9A07G054_CANFD_RSTC_N>; + reset-names = "rstp_n", "rstc_n"; + power-domains = <&cpg>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + channel1 { + status = "disabled"; + }; }; i2c0: i2c@10058000 { #address-cells = <1>; #size-cells = <0>; + compatible = "renesas,riic-r9a07g054", "renesas,riic-rz"; reg = <0 0x10058000 0 0x400>; - /* place holder */ + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G054_I2C0_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G054_I2C0_MRST>; + power-domains = <&cpg>; + status = "disabled"; }; i2c1: i2c@10058400 { #address-cells = <1>; #size-cells = <0>; + compatible = "renesas,riic-r9a07g054", "renesas,riic-rz"; reg = <0 0x10058400 0 0x400>; - /* place holder */ + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G054_I2C1_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G054_I2C1_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c2: i2c@10058800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g054", "renesas,riic-rz"; + reg = <0 0x10058800 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G054_I2C2_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G054_I2C2_MRST>; + power-domains = <&cpg>; + status = "disabled"; }; i2c3: i2c@10058c00 { #address-cells = <1>; #size-cells = <0>; + compatible = "renesas,riic-r9a07g054", "renesas,riic-rz"; reg = <0 0x10058c00 0 0x400>; - /* place holder */ + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G054_I2C3_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G054_I2C3_MRST>; + power-domains = <&cpg>; + status = "disabled"; }; adc: adc@10059000 { + compatible = "renesas,r9a07g054-adc", "renesas,rzg2l-adc"; reg = <0 0x10059000 0 0x400>; - /* place holder */ + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G054_ADC_ADCLK>, + <&cpg CPG_MOD R9A07G054_ADC_PCLK>; + clock-names = "adclk", "pclk"; + resets = <&cpg R9A07G054_ADC_PRESETN>, + <&cpg R9A07G054_ADC_ADRST_N>; + reset-names = "presetn", "adrst-n"; + power-domains = <&cpg>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; + channel@2 { + reg = <2>; + }; + channel@3 { + reg = <3>; + }; + channel@4 { + reg = <4>; + }; + channel@5 { + reg = <5>; + }; + channel@6 { + reg = <6>; + }; + channel@7 { + reg = <7>; + }; + }; + + tsu: thermal@10059400 { + compatible = "renesas,r9a07g054-tsu", + "renesas,rzg2l-tsu"; + reg = <0 0x10059400 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G054_TSU_PCLK>; + resets = <&cpg R9A07G054_TSU_PRESETN>; + power-domains = <&cpg>; + #thermal-sensor-cells = <1>; }; sbc: spi@10060000 { + compatible = "renesas,r9a07g054-rpc-if", + "renesas,rzg2l-rpc-if"; reg = <0 0x10060000 0 0x10000>, <0 0x20000000 0 0x10000000>, <0 0x10070000 0 0x10000>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G054_SPI_CLK2>, + <&cpg CPG_MOD R9A07G054_SPI_CLK>; + resets = <&cpg R9A07G054_SPI_RST>; + power-domains = <&cpg>; #address-cells = <1>; #size-cells = <0>; - /* place holder */ + status = "disabled"; }; cpg: clock-controller@11010000 { @@ -346,8 +689,24 @@ }; gpu: gpu@11840000 { + compatible = "renesas,r9a07g054-mali", + "arm,mali-bifrost"; reg = <0x0 0x11840000 0x0 0x10000>; - /* place holder */ + interrupts = , + , + , + ; + interrupt-names = "job", "mmu", "gpu", "event"; + clocks = <&cpg CPG_MOD R9A07G054_GPU_CLK>, + <&cpg CPG_MOD R9A07G054_GPU_AXI_CLK>, + <&cpg CPG_MOD R9A07G054_GPU_ACE_CLK>; + clock-names = "gpu", "bus", "bus_ace"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_GPU_RESETN>, + <&cpg R9A07G054_GPU_AXI_RESETN>, + <&cpg R9A07G054_GPU_ACE_RESETN>; + reset-names = "rst", "axi_rst", "ace_rst"; + operating-points-v2 = <&gpu_opp_table>; }; gic: interrupt-controller@11900000 { @@ -361,13 +720,35 @@ }; sdhi0: mmc@11c00000 { + compatible = "renesas,sdhi-r9a07g054", + "renesas,rcar-gen3-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; - /* place holder */ + interrupts = , + ; + clocks = <&cpg CPG_MOD R9A07G054_SDHI0_IMCLK>, + <&cpg CPG_MOD R9A07G054_SDHI0_CLK_HS>, + <&cpg CPG_MOD R9A07G054_SDHI0_IMCLK2>, + <&cpg CPG_MOD R9A07G054_SDHI0_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A07G054_SDHI0_IXRST>; + power-domains = <&cpg>; + status = "disabled"; }; sdhi1: mmc@11c10000 { + compatible = "renesas,sdhi-r9a07g054", + "renesas,rcar-gen3-sdhi"; reg = <0x0 0x11c10000 0 0x10000>; - /* place holder */ + interrupts = , + ; + clocks = <&cpg CPG_MOD R9A07G054_SDHI1_IMCLK>, + <&cpg CPG_MOD R9A07G054_SDHI1_CLK_HS>, + <&cpg CPG_MOD R9A07G054_SDHI1_IMCLK2>, + <&cpg CPG_MOD R9A07G054_SDHI1_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A07G054_SDHI1_IXRST>; + power-domains = <&cpg>; + status = "disabled"; }; eth0: ethernet@11c20000 { @@ -411,73 +792,226 @@ }; phyrst: usbphy-ctrl@11c40000 { + compatible = "renesas,r9a07g054-usbphy-ctrl", + "renesas,rzg2l-usbphy-ctrl"; reg = <0 0x11c40000 0 0x10000>; - /* place holder */ + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>; + resets = <&cpg R9A07G054_USB_PRESETN>; + power-domains = <&cpg>; + #reset-cells = <1>; + status = "disabled"; }; ohci0: usb@11c50000 { + compatible = "generic-ohci"; reg = <0 0x11c50000 0 0x100>; - /* place holder */ + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G054_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; }; ohci1: usb@11c70000 { + compatible = "generic-ohci"; reg = <0 0x11c70000 0 0x100>; - /* place holder */ + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G054_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; }; ehci0: usb@11c50100 { + compatible = "generic-ehci"; reg = <0 0x11c50100 0 0x100>; - /* place holder */ + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G054_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&cpg>; + status = "disabled"; }; ehci1: usb@11c70100 { + compatible = "generic-ehci"; reg = <0 0x11c70100 0 0x100>; - /* place holder */ + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G054_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&cpg>; + status = "disabled"; }; usb2_phy0: usb-phy@11c50200 { + compatible = "renesas,usb2-phy-r9a07g054", + "renesas,rzg2l-usb2-phy"; reg = <0 0x11c50200 0 0x700>; - /* place holder */ + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>; + resets = <&phyrst 0>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; }; usb2_phy1: usb-phy@11c70200 { + compatible = "renesas,usb2-phy-r9a07g054", + "renesas,rzg2l-usb2-phy"; reg = <0 0x11c70200 0 0x700>; - /* place holder */ + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>; + resets = <&phyrst 1>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; }; hsusb: usb@11c60000 { + compatible = "renesas,usbhs-r9a07g054", + "renesas,rza2-usbhs"; reg = <0 0x11c60000 0 0x10000>; - /* place holder */ + interrupts = , + , + , + ; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2P_EXR_CPUCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G054_USB_U2P_EXL_SYSRST>; + renesas,buswait = <7>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; }; wdt0: watchdog@12800800 { + compatible = "renesas,r9a07g054-wdt", + "renesas,rzg2l-wdt"; reg = <0 0x12800800 0 0x400>; - /* place holder */ + clocks = <&cpg CPG_MOD R9A07G054_WDT0_PCLK>, + <&cpg CPG_MOD R9A07G054_WDT0_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = , + ; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G054_WDT0_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; }; wdt1: watchdog@12800c00 { + compatible = "renesas,r9a07g054-wdt", + "renesas,rzg2l-wdt"; reg = <0 0x12800C00 0 0x400>; - /* place holder */ + clocks = <&cpg CPG_MOD R9A07G054_WDT1_PCLK>, + <&cpg CPG_MOD R9A07G054_WDT1_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = , + ; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G054_WDT1_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; }; wdt2: watchdog@12800400 { + compatible = "renesas,r9a07g054-wdt", + "renesas,rzg2l-wdt"; reg = <0 0x12800400 0 0x400>; - /* place holder */ + clocks = <&cpg CPG_MOD R9A07G054_WDT2_PCLK>, + <&cpg CPG_MOD R9A07G054_WDT2_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = , + ; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G054_WDT2_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; }; ostm0: timer@12801000 { + compatible = "renesas,r9a07g054-ostm", + "renesas,ostm"; reg = <0x0 0x12801000 0x0 0x400>; - /* place holder */ + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G054_OSTM0_PCLK>; + resets = <&cpg R9A07G054_OSTM0_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; }; ostm1: timer@12801400 { + compatible = "renesas,r9a07g054-ostm", + "renesas,ostm"; reg = <0x0 0x12801400 0x0 0x400>; - /* place holder */ + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G054_OSTM1_PCLK>; + resets = <&cpg R9A07G054_OSTM1_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; }; ostm2: timer@12801800 { + compatible = "renesas,r9a07g054-ostm", + "renesas,ostm"; reg = <0x0 0x12801800 0x0 0x400>; - /* place holder */ + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G054_OSTM2_PCLK>; + resets = <&cpg R9A07G054_OSTM2_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; + }; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsu 0>; + sustainable-power = <717>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 0 2>; + contribution = <1024>; + }; + }; + + trips { + sensor_crit: sensor-crit { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + + target: trip-point { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + }; }; }; diff --git a/dts/src/arm64/renesas/r9a07g054l2-smarc.dts b/dts/src/arm64/renesas/r9a07g054l2-smarc.dts index fc334b4c2a..4e07e1a0fb 100644 --- a/dts/src/arm64/renesas/r9a07g054l2-smarc.dts +++ b/dts/src/arm64/renesas/r9a07g054l2-smarc.dts @@ -16,11 +16,3 @@ model = "Renesas SMARC EVK based on r9a07g054l2"; compatible = "renesas,smarc-evk", "renesas,r9a07g054l2", "renesas,r9a07g054"; }; - -&pinctrl { - /delete-node/ can0-stb-hog; - /delete-node/ can1-stb-hog; - /delete-node/ gpio-sd0-pwr-en-hog; - /delete-node/ sd0-dev-sel-hog; - /delete-node/ sd1-pwr-en-hog; -}; diff --git a/dts/src/arm64/renesas/r9a09g011-v2mevk2.dts b/dts/src/arm64/renesas/r9a09g011-v2mevk2.dts new file mode 100644 index 0000000000..c207d8ce55 --- /dev/null +++ b/dts/src/arm64/renesas/r9a09g011-v2mevk2.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/V2M (r9a09g011) Evaluation Kit Board + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a09g011.dtsi" + +/ { + model = "RZ/V2M Evaluation Kit 2.0"; + compatible = "renesas,rzv2mevk2", "renesas,r9a09g011"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@58000000 { + device_type = "memory"; + /* + * first 1.25GiB is reserved for ISP Firmware, + * next 128MiB is reserved for secure area. + */ + reg = <0x0 0x58000000 0x0 0x28000000>; + }; + + memory@180000000 { + device_type = "memory"; + reg = <0x1 0x80000000 0x0 0x80000000>; + }; +}; + +&extal_clk { + clock-frequency = <48000000>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/r9a09g011.dtsi b/dts/src/arm64/renesas/r9a09g011.dtsi new file mode 100644 index 0000000000..27810f4ad4 --- /dev/null +++ b/dts/src/arm64/renesas/r9a09g011.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/V2M SoC + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include +#include + +/ { + compatible = "renesas,r9a09g011"; + #address-cells = <2>; + #size-cells = <2>; + + /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0>; + device_type = "cpu"; + clocks = <&cpg CPG_MOD R9A09G011_CA53_CLK>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@82000000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x82010000 0 0x1000>, + <0x0 0x82020000 0 0x20000>, + <0x0 0x82040000 0 0x20000>, + <0x0 0x82060000 0 0x20000>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A09G011_GIC_CLK>; + clock-names = "clk"; + }; + + cpg: clock-controller@a3500000 { + compatible = "renesas,r9a09g011-cpg"; + reg = <0 0xa3500000 0 0x1000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + uart0: serial@a4040000 { + compatible = "renesas,r9a09g011-uart", "renesas,em-uart"; + reg = <0 0xa4040000 0 0x80>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A09G011_URT0_CLK>, + <&cpg CPG_MOD R9A09G011_URT_PCLK>; + clock-names = "sclk", "pclk"; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/dts/src/arm64/renesas/rz-smarc-common.dtsi b/dts/src/arm64/renesas/rz-smarc-common.dtsi index 588117aafa..3962d47b3e 100644 --- a/dts/src/arm64/renesas/rz-smarc-common.dtsi +++ b/dts/src/arm64/renesas/rz-smarc-common.dtsi @@ -26,7 +26,6 @@ serial0 = &scif0; i2c0 = &i2c0; i2c1 = &i2c1; - i2c3 = &i2c3; }; chosen { @@ -53,7 +52,6 @@ "Mic Bias", "Microphone Jack"; cpu_dai: simple-audio-card,cpu { - sound-dai = <&ssi0>; }; codec_dai: simple-audio-card,codec { @@ -75,7 +73,6 @@ regulator-name = "SDHI1 VccQ"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; gpios-states = <1>; states = <3300000 1>, <1800000 0>; }; @@ -131,20 +128,6 @@ status = "okay"; }; -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - clock-frequency = <400000>; - - status = "okay"; - - wm8978: codec@1a { - compatible = "wlf,wm8978"; - #sound-dai-cells = <0>; - reg = <0x1a>; - }; -}; - &ohci0 { dr_mode = "otg"; status = "okay"; @@ -184,13 +167,6 @@ status = "okay"; }; -&ssi0 { - pinctrl-0 = <&ssi0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm64/renesas/rzg2l-smarc.dtsi b/dts/src/arm64/renesas/rzg2l-smarc.dtsi index 33ddfd18bd..e180a955b6 100644 --- a/dts/src/arm64/renesas/rzg2l-smarc.dtsi +++ b/dts/src/arm64/renesas/rzg2l-smarc.dtsi @@ -14,6 +14,25 @@ / { aliases { serial1 = &scif2; + i2c3 = &i2c3; + }; +}; + +&cpu_dai { + sound-dai = <&ssi0>; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; + + wm8978: codec@1a { + compatible = "wlf,wm8978"; + #sound-dai-cells = <0>; + reg = <0x1a>; }; }; @@ -33,3 +52,14 @@ status = "okay"; }; #endif + +&ssi0 { + pinctrl-0 = <&ssi0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&vccq_sdhi1 { + gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; +}; diff --git a/dts/src/arm64/renesas/rzg2lc-smarc-pinfunction.dtsi b/dts/src/arm64/renesas/rzg2lc-smarc-pinfunction.dtsi index 37ff209158..a78a8def36 100644 --- a/dts/src/arm64/renesas/rzg2lc-smarc-pinfunction.dtsi +++ b/dts/src/arm64/renesas/rzg2lc-smarc-pinfunction.dtsi @@ -12,11 +12,6 @@ pinctrl-0 = <&sound_clk_pins>; pinctrl-names = "default"; - scif0_pins: scif0 { - pinmux = , /* TxD */ - ; /* RxD */ - }; - #if SW_SCIF_CAN /* SW8 should be at position 2->1 */ can1_pins: can1 { @@ -25,13 +20,6 @@ }; #endif - scif1_pins: scif1 { - pinmux = , /* TxD */ - , /* RxD */ - , /* CTS# */ - ; /* RTS# */ - }; - #if SW_RSPI_CAN /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ can1-stb-hog { @@ -47,6 +35,33 @@ }; #endif + i2c0_pins: i2c0 { + pins = "RIIC0_SDA", "RIIC0_SCL"; + input-enable; + }; + + i2c1_pins: i2c1 { + pins = "RIIC1_SDA", "RIIC1_SCL"; + input-enable; + }; + + i2c2_pins: i2c2 { + pinmux = , /* SDA */ + ; /* SCL */ + }; + + scif0_pins: scif0 { + pinmux = , /* TxD */ + ; /* RxD */ + }; + + scif1_pins: scif1 { + pinmux = , /* TxD */ + , /* RxD */ + , /* CTS# */ + ; /* RTS# */ + }; + sd1-pwr-en-hog { gpio-hog; gpios = ; @@ -90,5 +105,30 @@ pins = "AUDIO_CLK1", "AUDIO_CLK2"; input-enable; }; + + spi1_pins: spi1 { + pinmux = , /* CK */ + , /* MOSI */ + , /* MISO */ + ; /* SSL */ + }; + + ssi0_pins: ssi0 { + pinmux = , /* BCK */ + , /* RCK */ + , /* TXD */ + ; /* RXD */ + }; + + usb0_pins: usb0 { + pinmux = , /* VBUS */ + , /* OVC */ + ; /* OTG_ID */ + }; + + usb1_pins: usb1 { + pinmux = , /* VBUS */ + ; /* OVC */ + }; }; diff --git a/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi b/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi index 88a7938017..959a0ad1d3 100644 --- a/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi +++ b/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi @@ -41,6 +41,15 @@ regulator-always-on; }; + reg_1p1v: regulator-vdd-core { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; @@ -84,6 +93,18 @@ clock-frequency = <24000000>; }; +&gpu { + mali-supply = <®_1p1v>; +}; + +&ostm1 { + status = "okay"; +}; + +&ostm2 { + status = "okay"; +}; + &pinctrl { eth0_pins: eth0 { pinmux = , /* ET0_LINKSTA */ @@ -110,6 +131,18 @@ line-name = "gpio_sd0_pwr_en"; }; + qspi0_pins: qspi0 { + qspi0-data { + pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3"; + power-source = <1800>; + }; + + qspi0-ctrl { + pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#"; + power-source = <1800>; + }; + }; + /* * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2] * The below switch logic can be used to select the device between @@ -175,6 +208,34 @@ }; }; +&sbc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,mt25qu512a", "jedec,spi-nor"; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + reg = <0x00000000 0x2000000>; + read-only; + }; + user@2000000 { + reg = <0x2000000 0x2000000>; + }; + }; + }; +}; + #if (!SW_SD0_DEV_SEL) &sdhi0 { pinctrl-0 = <&sdhi0_pins>; diff --git a/dts/src/arm64/renesas/rzg2lc-smarc.dtsi b/dts/src/arm64/renesas/rzg2lc-smarc.dtsi index df7631fe5f..aa170492dd 100644 --- a/dts/src/arm64/renesas/rzg2lc-smarc.dtsi +++ b/dts/src/arm64/renesas/rzg2lc-smarc.dtsi @@ -43,6 +43,7 @@ / { aliases { serial1 = &scif1; + i2c2 = &i2c2; }; }; @@ -59,6 +60,24 @@ }; #endif +&cpu_dai { + sound-dai = <&ssi0>; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; + + wm8978: codec@1a { + compatible = "wlf,wm8978"; + #sound-dai-cells = <0>; + reg = <0x1a>; + }; +}; + /* * To enable SCIF1 (SER0) on PMOD1 (CN7), On connector board * SW1 should be at position 2->3 so that SER0_CTS# line is activated @@ -75,3 +94,22 @@ status = "okay"; }; #endif + +&ssi0 { + pinctrl-0 = <&ssi0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +#if (SW_RSPI_CAN) +&spi1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; +#endif + +&vccq_sdhi1 { + gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; +}; diff --git a/dts/src/arm64/renesas/rzg2ul-smarc-pinfunction.dtsi b/dts/src/arm64/renesas/rzg2ul-smarc-pinfunction.dtsi new file mode 100644 index 0000000000..bd8bc858c2 --- /dev/null +++ b/dts/src/arm64/renesas/rzg2ul-smarc-pinfunction.dtsi @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2UL SMARC pincontrol parts + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include +#include + +&pinctrl { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + can0_pins: can0 { + pinmux = , /* TX */ + ; /* RX */ + }; + +#if (SW_ET0_EN_N) + can0-stb-hog { + gpio-hog; + gpios = ; + output-low; + line-name = "can0_stb"; + }; +#endif + + can1_pins: can1 { + pinmux = , /* TX */ + ; /* RX */ + }; + +#if (SW_ET0_EN_N) + can1-stb-hog { + gpio-hog; + gpios = ; + output-low; + line-name = "can1_stb"; + }; +#endif + + i2c0_pins: i2c0 { + pins = "RIIC0_SDA", "RIIC0_SCL"; + input-enable; + }; + + i2c1_pins: i2c1 { + pins = "RIIC1_SDA", "RIIC1_SCL"; + input-enable; + }; + + scif0_pins: scif0 { + pinmux = , /* TxD */ + ; /* RxD */ + }; + + sd1-pwr-en-hog { + gpio-hog; + gpios = ; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1_data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + sd1_ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + + sd1_mux { + pinmux = ; /* SD1_CD */ + }; + }; + + sdhi1_pins_uhs: sd1_uhs { + sd1_data_uhs { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <1800>; + }; + + sd1_ctrl_uhs { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <1800>; + }; + + sd1_mux_uhs { + pinmux = ; /* SD1_CD */ + }; + }; + + sound_clk_pins: sound_clk { + pins = "AUDIO_CLK1", "AUDIO_CLK2"; + input-enable; + }; + + ssi1_pins: ssi1 { + pinmux = , /* BCK */ + , /* RCK */ + , /* TXD */ + ; /* RXD */ + }; + + usb0_pins: usb0 { + pinmux = , /* VBUS */ + , /* OVC */ + ; /* OTG_ID */ + }; + + usb1_pins: usb1 { + pinmux = , /* OVC */ + ; /* VBUS */ + }; +}; diff --git a/dts/src/arm64/renesas/rzg2ul-smarc-som.dtsi b/dts/src/arm64/renesas/rzg2ul-smarc-som.dtsi new file mode 100644 index 0000000000..a663115f5a --- /dev/null +++ b/dts/src/arm64/renesas/rzg2ul-smarc-som.dtsi @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2UL SMARC SOM common parts + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include +#include + +/ { + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + +#if !(SW_SW0_DEV_SEL) + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + states = <3300000 1>, <1800000 0>; + regulator-boot-on; + gpios = <&pinctrl RZG2L_GPIO(6, 2) GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; +#endif +}; + +#if (!SW_ET0_EN_N) +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy0: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + rxc-skew-psec = <2400>; + txc-skew-psec = <2400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; +#endif + +ð1 { + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy1: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + rxc-skew-psec = <2400>; + txc-skew-psec = <2400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&extal_clk { + clock-frequency = <24000000>; +}; + +&ostm1 { + status = "okay"; +}; + +&ostm2 { + status = "okay"; +}; + +&pinctrl { + eth0_pins: eth0 { + pinmux = , /* ET0_LINKSTA */ + , /* ET0_MDC */ + , /* ET0_MDIO */ + , /* ET0_TXC */ + , /* ET0_TX_CTL */ + , /* ET0_TXD0 */ + , /* ET0_TXD1 */ + , /* ET0_TXD2 */ + , /* ET0_TXD3 */ + , /* ET0_RXC */ + , /* ET0_RX_CTL */ + , /* ET0_RXD0 */ + , /* ET0_RXD1 */ + , /* ET0_RXD2 */ + ; /* ET0_RXD3 */ + }; + + eth1_pins: eth1 { + pinmux = , /* ET1_LINKSTA */ + , /* ET1_MDC */ + , /* ET1_MDIO */ + , /* ET1_TXC */ + , /* ET1_TX_CTL */ + , /* ET1_TXD0 */ + , /* ET1_TXD1 */ + , /* ET1_TXD2 */ + , /* ET1_TXD3 */ + , /* ET1_RXC */ + , /* ET1_RX_CTL */ + , /* ET1_RXD0 */ + , /* ET1_RXD1 */ + , /* ET1_RXD2 */ + ; /* ET1_RXD3 */ + }; + + sdhi0_emmc_pins: sd0emmc { + sd0_emmc_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", + "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7"; + power-source = <1800>; + }; + + sd0_emmc_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_emmc_rst { + pins = "SD0_RST#"; + power-source = <1800>; + }; + }; + + sdhi0_pins: sd0 { + sd0_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <3300>; + }; + + sd0_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <3300>; + }; + + sd0_mux { + pinmux = ; /* SD0_CD */ + }; + }; + + sdhi0_pins_uhs: sd0_uhs { + sd0_data_uhs { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <1800>; + }; + + sd0_ctrl_uhs { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_mux_uhs { + pinmux = ; /* SD0_CD */ + }; + }; +}; + +#if (SW_SW0_DEV_SEL) +&sdhi0 { + pinctrl-0 = <&sdhi0_emmc_pins>; + pinctrl-1 = <&sdhi0_emmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; +#else +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; +#endif + +&wdt0 { + status = "okay"; + timeout-sec = <60>; +}; + +&wdt2 { + status = "okay"; + timeout-sec = <60>; +}; diff --git a/dts/src/arm64/renesas/rzg2ul-smarc.dtsi b/dts/src/arm64/renesas/rzg2ul-smarc.dtsi new file mode 100644 index 0000000000..0051634d7b --- /dev/null +++ b/dts/src/arm64/renesas/rzg2ul-smarc.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK parts + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * DIP-Switch SW1 setting + * 1 : High; 0: Low + * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC) + * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1) + * Please change below macros according to SW1 setting + */ +#define SW_SW0_DEV_SEL 1 +#define SW_ET0_EN_N 1 + +#include "rzg2ul-smarc-som.dtsi" +#include "rzg2ul-smarc-pinfunction.dtsi" +#include "rz-smarc-common.dtsi" + +#if (!SW_ET0_EN_N) +&canfd { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; +#endif + +&cpu_dai { + sound-dai = <&ssi1>; +}; + +&i2c1 { + wm8978: codec@1a { + compatible = "wlf,wm8978"; + #sound-dai-cells = <0>; + reg = <0x1a>; + }; +}; + +#if (SW_ET0_EN_N) +&ssi1 { + pinctrl-0 = <&ssi1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; +#else +&snd_rzg2l { + status = "disabled"; +}; + +&ssi1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; +#endif + +&vccq_sdhi1 { + gpios = <&pinctrl RZG2L_GPIO(6, 1) GPIO_ACTIVE_HIGH>; +}; diff --git a/dts/src/arm64/renesas/salvator-common.dtsi b/dts/src/arm64/renesas/salvator-common.dtsi index 6092dc4531..31837fcd7b 100644 --- a/dts/src/arm64/renesas/salvator-common.dtsi +++ b/dts/src/arm64/renesas/salvator-common.dtsi @@ -386,7 +386,7 @@ ports { port@0 { - endpoint { + du_out_rgb: endpoint { remote-endpoint = <&adv7123_in>; }; }; @@ -866,6 +866,55 @@ }; }; +&rpc { + /* Left disabled. To be enabled by firmware when unlocked. */ + + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + bl2@40000 { + reg = <0x00040000 0x140000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x040000>; + read-only; + }; + tee@200000 { + reg = <0x00200000 0x440000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x100000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/dts/src/arm64/renesas/ulcb-kf.dtsi b/dts/src/arm64/renesas/ulcb-kf.dtsi index ae532cd217..5bcb84403e 100644 --- a/dts/src/arm64/renesas/ulcb-kf.dtsi +++ b/dts/src/arm64/renesas/ulcb-kf.dtsi @@ -97,8 +97,14 @@ status = "okay"; }; -&du_out_rgb { - remote-endpoint = <&adv7513_in>; +&du { + ports { + port@0 { + du_out_rgb: endpoint { + remote-endpoint = <&adv7513_in>; + }; + }; + }; }; &ehci0 { diff --git a/dts/src/arm64/renesas/ulcb.dtsi b/dts/src/arm64/renesas/ulcb.dtsi index b4bdb2d7e4..90a4c0629d 100644 --- a/dts/src/arm64/renesas/ulcb.dtsi +++ b/dts/src/arm64/renesas/ulcb.dtsi @@ -426,6 +426,55 @@ }; }; +&rpc { + /* Left disabled. To be enabled by firmware when unlocked. */ + + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + bl2@40000 { + reg = <0x00040000 0x140000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x040000>; + read-only; + }; + tee@200000 { + reg = <0x00200000 0x440000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x100000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/dts/src/arm64/rockchip/rk3308.dtsi b/dts/src/arm64/rockchip/rk3308.dtsi index 1cbe212618..2dfa67f1cd 100644 --- a/dts/src/arm64/rockchip/rk3308.dtsi +++ b/dts/src/arm64/rockchip/rk3308.dtsi @@ -745,10 +745,11 @@ cru: clock-controller@ff500000 { compatible = "rockchip,rk3308-cru"; reg = <0x0 0xff500000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; + rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; - rockchip,grf = <&grf>; - assigned-clocks = <&cru SCLK_RTC32K>; assigned-clock-rates = <32768>; }; diff --git a/dts/src/arm64/rockchip/rk3328.dtsi b/dts/src/arm64/rockchip/rk3328.dtsi index b822533dc7..49ae15708a 100644 --- a/dts/src/arm64/rockchip/rk3328.dtsi +++ b/dts/src/arm64/rockchip/rk3328.dtsi @@ -306,6 +306,10 @@ }; power-domain@RK3328_PD_VIDEO { reg = ; + clocks = <&cru ACLK_RKVDEC>, + <&cru HCLK_RKVDEC>, + <&cru SCLK_VDEC_CABAC>, + <&cru SCLK_VDEC_CORE>; #power-domain-cells = <0>; }; power-domain@RK3328_PD_VPU { @@ -660,14 +664,28 @@ power-domains = <&power RK3328_PD_VPU>; }; - rkvdec_mmu: iommu@ff360480 { + vdec: video-codec@ff360000 { + compatible = "rockchip,rk3328-vdec", "rockchip,rk3399-vdec"; + reg = <0x0 0xff360000 0x0 0x400>; + interrupts = ; + clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>, + <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>; + clock-names = "axi", "ahb", "cabac", "core"; + assigned-clocks = <&cru ACLK_RKVDEC>, <&cru SCLK_VDEC_CABAC>, + <&cru SCLK_VDEC_CORE>; + assigned-clock-rates = <400000000>, <400000000>, <300000000>; + iommus = <&vdec_mmu>; + power-domains = <&power RK3328_PD_VIDEO>; + }; + + vdec_mmu: iommu@ff360480 { compatible = "rockchip,iommu"; reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>; interrupts = ; clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>; clock-names = "aclk", "iface"; #iommu-cells = <0>; - status = "disabled"; + power-domains = <&power RK3328_PD_VIDEO>; }; vop: vop@ff370000 { diff --git a/dts/src/arm64/rockchip/rk3368.dtsi b/dts/src/arm64/rockchip/rk3368.dtsi index c99da90328..4f0b5feaa5 100644 --- a/dts/src/arm64/rockchip/rk3368.dtsi +++ b/dts/src/arm64/rockchip/rk3368.dtsi @@ -747,6 +747,8 @@ cru: clock-controller@ff760000 { compatible = "rockchip,rk3368-cru"; reg = <0x0 0xff760000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/dts/src/arm64/rockchip/rk3399-firefly.dts b/dts/src/arm64/rockchip/rk3399-firefly.dts index c654b6b02f..b340c9e246 100644 --- a/dts/src/arm64/rockchip/rk3399-firefly.dts +++ b/dts/src/arm64/rockchip/rk3399-firefly.dts @@ -5,6 +5,7 @@ /dts-v1/; #include +#include #include #include #include "rk3399.dtsi" @@ -786,7 +787,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; - interrupts = ; + interrupts = ; interrupt-names = "host-wake"; brcm,drive-strength = <5>; pinctrl-names = "default"; diff --git a/dts/src/arm64/rockchip/rk3399-gru-chromebook.dtsi b/dts/src/arm64/rockchip/rk3399-gru-chromebook.dtsi index 3355fb90fa..50d459ee48 100644 --- a/dts/src/arm64/rockchip/rk3399-gru-chromebook.dtsi +++ b/dts/src/arm64/rockchip/rk3399-gru-chromebook.dtsi @@ -234,6 +234,13 @@ extcon = <&usbc_extcon0>, <&usbc_extcon1>; }; +&dmc { + center-supply = <&ppvar_centerlogic>; + rockchip,pd-idle-dis-freq-hz = <800000000>; + rockchip,sr-idle-dis-freq-hz = <800000000>; + rockchip,sr-mc-gate-idle-dis-freq-hz = <800000000>; +}; + &edp { status = "okay"; diff --git a/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi b/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi index a9817b3d7e..913d845eb5 100644 --- a/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi +++ b/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi @@ -391,6 +391,18 @@ camera: &i2c7 { <400000000>; }; +/* The center supply is fixed to .9V on scarlet */ +&dmc { + center-supply = <&pp900_s0>; +}; + +/* We don't need .925 V for 928 MHz on scarlet */ +&dmc_opp_table { + opp03 { + opp-microvolt = <900000>; + }; +}; + &gpio0 { gpio-line-names = /* GPIO0 A 0-7 */ "CLK_32K_AP", diff --git a/dts/src/arm64/rockchip/rk3399-gru.dtsi b/dts/src/arm64/rockchip/rk3399-gru.dtsi index 162f08bca0..23bfba86da 100644 --- a/dts/src/arm64/rockchip/rk3399-gru.dtsi +++ b/dts/src/arm64/rockchip/rk3399-gru.dtsi @@ -373,6 +373,34 @@ <200000000>; }; +&dfi { + status = "okay"; +}; + +&dmc { + status = "okay"; + + rockchip,pd-idle-ns = <160>; + rockchip,sr-idle-ns = <10240>; + rockchip,sr-mc-gate-idle-ns = <40960>; + rockchip,srpd-lite-idle-ns = <61440>; + rockchip,standby-idle-ns = <81920>; + + rockchip,ddr3_odt_dis_freq = <666000000>; + rockchip,lpddr3_odt_dis_freq = <666000000>; + rockchip,lpddr4_odt_dis_freq = <666000000>; + + rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>; + rockchip,srpd-lite-idle-dis-freq-hz = <0>; + rockchip,standby-idle-dis-freq-hz = <928000000>; +}; + +&dmc_opp_table { + opp03 { + opp-suspend; + }; +}; + &emmc_phy { status = "okay"; }; diff --git a/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts b/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts index bee45c17e2..7af27e8216 100644 --- a/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts +++ b/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts @@ -2,6 +2,7 @@ /dts-v1/; #include #include +#include #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -629,7 +630,7 @@ compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio0>; - interrupts = ; + interrupts = ; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; diff --git a/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi b/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi index 7ba3ed2408..46c4581deb 100644 --- a/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi +++ b/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include +#include #include #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -682,7 +683,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; - interrupts = ; + interrupts = ; interrupt-names = "host-wake"; brcm,drive-strength = <5>; pinctrl-names = "default"; diff --git a/dts/src/arm64/rockchip/rk3399-leez-p710.dts b/dts/src/arm64/rockchip/rk3399-leez-p710.dts index 5bbe74bed0..a21ac319f8 100644 --- a/dts/src/arm64/rockchip/rk3399-leez-p710.dts +++ b/dts/src/arm64/rockchip/rk3399-leez-p710.dts @@ -5,6 +5,7 @@ /dts-v1/; #include +#include #include #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -509,7 +510,7 @@ compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio0>; - interrupts = ; + interrupts = ; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; diff --git a/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi b/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi index 8c0ff6c96e..248ad41a97 100644 --- a/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi +++ b/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi @@ -267,7 +267,7 @@ interrupt-parent = <&gpio1>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; + pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>; rockchip,system-power-controller; wakeup-source; diff --git a/dts/src/arm64/rockchip/rk3399-op1-opp.dtsi b/dts/src/arm64/rockchip/rk3399-op1-opp.dtsi index 2180e0f750..6e29e74f6f 100644 --- a/dts/src/arm64/rockchip/rk3399-op1-opp.dtsi +++ b/dts/src/arm64/rockchip/rk3399-op1-opp.dtsi @@ -110,6 +110,27 @@ opp-microvolt = <1075000>; }; }; + + dmc_opp_table: dmc_opp_table { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <900000>; + }; + opp01 { + opp-hz = /bits/ 64 <666000000>; + opp-microvolt = <900000>; + }; + opp02 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <900000>; + }; + opp03 { + opp-hz = /bits/ 64 <928000000>; + opp-microvolt = <925000>; + }; + }; }; &cpu_l0 { @@ -136,6 +157,10 @@ operating-points-v2 = <&cluster1_opp>; }; +&dmc { + operating-points-v2 = <&dmc_opp_table>; +}; + &gpu { operating-points-v2 = <&gpu_opp_table>; }; diff --git a/dts/src/arm64/rockchip/rk3399-orangepi.dts b/dts/src/arm64/rockchip/rk3399-orangepi.dts index 9d3a718f66..ed856bfcfc 100644 --- a/dts/src/arm64/rockchip/rk3399-orangepi.dts +++ b/dts/src/arm64/rockchip/rk3399-orangepi.dts @@ -7,6 +7,7 @@ #include "dt-bindings/pwm/pwm.h" #include "dt-bindings/input/input.h" +#include #include "dt-bindings/usb/pd.h" #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -735,7 +736,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; - interrupts = ; + interrupts = ; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4b.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4b.dts index cf48746a3a..0806545922 100644 --- a/dts/src/arm64/rockchip/rk3399-rock-pi-4b.dts +++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4b.dts @@ -23,7 +23,7 @@ compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio0>; - interrupts = ; + interrupts = ; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4c.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4c.dts index 793d848339..4053ba7261 100644 --- a/dts/src/arm64/rockchip/rk3399-rock-pi-4c.dts +++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4c.dts @@ -31,7 +31,7 @@ compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio0>; - interrupts = ; + interrupts = ; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; diff --git a/dts/src/arm64/rockchip/rk3399-rock960.dtsi b/dts/src/arm64/rockchip/rk3399-rock960.dtsi index 25dc61c26a..94e39ed633 100644 --- a/dts/src/arm64/rockchip/rk3399-rock960.dtsi +++ b/dts/src/arm64/rockchip/rk3399-rock960.dtsi @@ -7,6 +7,7 @@ #include "rk3399.dtsi" #include "rk3399-opp.dtsi" +#include / { aliases { @@ -528,7 +529,7 @@ compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio0>; - interrupts = ; + interrupts = ; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; diff --git a/dts/src/arm64/rockchip/rk3399.dtsi b/dts/src/arm64/rockchip/rk3399.dtsi index 080457a68e..fbd0346624 100644 --- a/dts/src/arm64/rockchip/rk3399.dtsi +++ b/dts/src/arm64/rockchip/rk3399.dtsi @@ -178,6 +178,15 @@ ports = <&vopl_out>, <&vopb_out>; }; + dmc: memory-controller { + compatible = "rockchip,rk3399-dmc"; + rockchip,pmu = <&pmugrf>; + devfreq-events = <&dfi>; + clocks = <&cru SCLK_DDRC>; + clock-names = "dmc_clk"; + status = "disabled"; + }; + pmu_a53 { compatible = "arm,cortex-a53-pmu"; interrupts = ; @@ -1295,6 +1304,16 @@ status = "disabled"; }; + dfi: dfi@ff630000 { + reg = <0x00 0xff630000 0x00 0x4000>; + compatible = "rockchip,rk3399-dfi"; + rockchip,pmu = <&pmugrf>; + interrupts = ; + clocks = <&cru PCLK_DDR_MON>; + clock-names = "pclk_ddr_mon"; + status = "disabled"; + }; + vpu: video-codec@ff650000 { compatible = "rockchip,rk3399-vpu"; reg = <0x0 0xff650000 0x0 0x800>; @@ -1413,9 +1432,11 @@ clock-names = "apb_pclk"; }; - pmucru: pmu-clock-controller@ff750000 { + pmucru: clock-controller@ff750000 { compatible = "rockchip,rk3399-pmucru"; reg = <0x0 0xff750000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&pmugrf>; #clock-cells = <1>; #reset-cells = <1>; @@ -1426,6 +1447,8 @@ cru: clock-controller@ff760000 { compatible = "rockchip,rk3399-cru"; reg = <0x0 0xff760000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; @@ -1534,6 +1557,7 @@ reg = <0xf780 0x24>; clocks = <&sdhci>; clock-names = "emmcclk"; + drive-impedance-ohm = <50>; #phy-cells = <0>; status = "disabled"; }; @@ -1544,7 +1568,6 @@ clock-names = "refclk"; #phy-cells = <1>; resets = <&cru SRST_PCIEPHY>; - drive-impedance-ohm = <50>; reset-names = "phy"; status = "disabled"; }; @@ -1884,7 +1907,7 @@ <&cru SCLK_HDMI_CEC>, <&cru PCLK_VIO_GRF>, <&cru PLL_VPLL>; - clock-names = "iahb", "isfr", "cec", "grf", "vpll"; + clock-names = "iahb", "isfr", "cec", "grf", "ref"; power-domains = <&power RK3399_PD_HDCP>; reg-io-width = <4>; rockchip,grf = <&grf>; @@ -2188,6 +2211,22 @@ output-low; }; + pcfg_input_enable: pcfg-input-enable { + input-enable; + }; + + pcfg_input_pull_up: pcfg-input-pull-up { + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_input_pull_down: pcfg-input-pull-down { + input-enable; + bias-pull-down; + drive-strength = <2>; + }; + clock { clk_32k: clk-32k { rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; diff --git a/dts/src/arm64/rockchip/rk3566-pinenote.dtsi b/dts/src/arm64/rockchip/rk3566-pinenote.dtsi index fea748adfa..e01668e6e5 100644 --- a/dts/src/arm64/rockchip/rk3566-pinenote.dtsi +++ b/dts/src/arm64/rockchip/rk3566-pinenote.dtsi @@ -466,6 +466,55 @@ default-brightness = <0>; }; }; + + wusb3801: tcpc@60 { + compatible = "willsemi,wusb3801"; + reg = <0x60>; + interrupt-parent = <&gpio0>; + interrupts = ; + pinctrl-0 = <&tcpc_int_l>; + pinctrl-names = "default"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + vbus-supply = <&otg_switch>; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <0x1>; + #size-cells = <0x0>; + + port@0 { + reg = <0x0>; + + typec_hs_usb2phy0: endpoint { + remote-endpoint = <&usb2phy0_typec_hs>; + }; + }; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + accelerometer@18 { + compatible = "silan,sc7a20"; + reg = <0x18>; + interrupt-parent = <&gpio3>; + interrupts = ; + pinctrl-0 = <&accelerometer_int_l>; + pinctrl-names = "default"; + st,drdy-int-pin = <1>; + vdd-supply = <&vcc_3v3>; + vddio-supply = <&vcc_3v3>; + }; }; &i2s1_8ch { @@ -482,6 +531,12 @@ }; &pinctrl { + accelerometer { + accelerometer_int_l: accelerometer-int-l { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + audio-amplifier { spk_amp_enable_h: spk-amp-enable-h { rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; @@ -550,6 +605,12 @@ }; }; + tcpc { + tcpc_int_l: tcpc-int-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + vcc-wl { vcc_wl_pin: vcc-wl-pin { rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -637,3 +698,22 @@ &uart2 { status = "okay"; }; + +&usb_host0_xhci { + dr_mode = "otg"; + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; + + port { + usb2phy0_typec_hs: endpoint { + remote-endpoint = <&typec_hs_usb2phy0>; + }; + }; +}; diff --git a/dts/src/arm64/rockchip/rk3566-quartz64-a.dts b/dts/src/arm64/rockchip/rk3566-quartz64-a.dts index dd7f4b9b68..1534e11a9a 100644 --- a/dts/src/arm64/rockchip/rk3566-quartz64-a.dts +++ b/dts/src/arm64/rockchip/rk3566-quartz64-a.dts @@ -151,6 +151,16 @@ vin-supply = <&vcc5v0_usb>; }; + vcc5v0_usb20_otg: vcc5v0_usb20_otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc5v0_usb20_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dcdc_boost>; + }; + vcc3v3_sd: vcc3v3_sd { compatible = "regulator-fixed"; enable-active-low; @@ -187,6 +197,10 @@ }; }; +&combphy1 { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_cpu>; }; @@ -638,8 +652,8 @@ compatible = "brcm,bcm43438-bt"; clocks = <&rk817 1>; clock-names = "lpo"; - device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; - host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; @@ -672,6 +686,29 @@ status = "okay"; }; +&usb_host0_xhci { + status = "okay"; +}; + +/* usb3 controller is muxed with sata1 */ +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb20_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb20_otg>; + status = "okay"; +}; + &usb2phy1 { status = "okay"; }; diff --git a/dts/src/arm64/rockchip/rk3566-quartz64-b.dts b/dts/src/arm64/rockchip/rk3566-quartz64-b.dts new file mode 100644 index 0000000000..7bdcecc0df --- /dev/null +++ b/dts/src/arm64/rockchip/rk3566-quartz64-b.dts @@ -0,0 +1,615 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include "rk3566.dtsi" + +/ { + model = "Pine64 RK3566 Quartz64-B Board"; + compatible = "pine64,quartz64-b", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + mmc2 = &sdmmc1; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + + led-user { + label = "user-led"; + default-state = "on"; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led_enable_h>; + retain-state-suspended; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + status = "okay"; + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <100>; + power-off-delay-us = <5000000>; + }; + + vcc5v0_in: vcc5v0-in-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_in"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_in>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb30_host"; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb30_host_en_h>; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb_otg"; + enable-active-high; + gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en_h>; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; + clock_in_out = "input"; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_clkinout + &gmac1m1_rgmii_bus>; + snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f, also works well here */ + snps,reset-delays-us = <0 20000 100000>; + tx_delay = <0x4f>; + rx_delay = <0x24>; + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = ; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-boot-on; + regulator-name = "vcc_3v3"; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + }; + }; + }; +}; + +/* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */ +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2m1_xfer>; + status = "okay"; +}; + +/* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */ +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m1_xfer>; + status = "okay"; +}; + +/* + * i2c4_m0 is exposed on PI40, pulled up to vcc_3v3 + * pin 27 - i2c4_sda_m0 + * pin 28 - i2c4_scl_m0 + */ +&i2c4 { + status = "okay"; +}; + +/* + * i2c5_m0 is exposed on PI40 + * pin 29 - i2c5_scl_m0 + * pin 31 - i2c5_sda_m0 + */ +&i2c5 { + status = "disabled"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + }; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + user_led_enable_h: user-led-enable-h { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcca1v8_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcca1v8_pmu>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcca1v8_pmu>; + status = "okay"; +}; + +&sfc { + pinctrl-0 = <&fspi_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + status = "okay"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca1v8_pmu>; + }; +}; + +/* + * uart2_m0 is exposed on PI40 + * pin 8 - uart2_tx_m0 + * pin 10 - uart2_rx_m0 + */ +&uart2 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb30_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb30_host>; + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3566-roc-pc.dts b/dts/src/arm64/rockchip/rk3566-roc-pc.dts new file mode 100644 index 0000000000..57759b66d4 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3566-roc-pc.dts @@ -0,0 +1,579 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include "rk3566.dtsi" + +/ { + model = "Firefly Station M2"; + compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566"; + + aliases { + mmc0 = &sdmmc0; + mmc1 = &sdhci; + mmc2 = &sdmmc1; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + + led-user { + label = "user-led"; + default-state = "on"; + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led_enable_h>; + retain-state-suspended; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + status = "okay"; + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + }; + + usb_5v: usb-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "usb_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&usb_5v>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb30_host"; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb30_host_en_h>; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb_otg"; + enable-active-high; + gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en_h>; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; + clock_in_out = "input"; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m0_miim + &gmac1m0_tx_bus2 + &gmac1m0_rx_bus2 + &gmac1m0_rgmii_clk + &gmac1m0_clkinout + &gmac1m0_rgmii_bus>; + snps,reset-gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + tx_delay = <0x4f>; + rx_delay = <0x24>; + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = ; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-boot-on; + regulator-name = "vcc3v3"; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m1_xfer>; + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + user_led_enable_h: user-led-enable-h { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcca1v8_pmu>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + status = "okay"; +}; + +&tsadc { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; + status = "okay"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca1v8_pmu>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb30_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb30_host>; + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3566-soquartz-cm4.dts b/dts/src/arm64/rockchip/rk3566-soquartz-cm4.dts new file mode 100644 index 0000000000..e00568a6be --- /dev/null +++ b/dts/src/arm64/rockchip/rk3566-soquartz-cm4.dts @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-soquartz.dtsi" + +/ { + model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board"; + compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566"; + + /* labeled +12v in schematic */ + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* labeled +5v in schematic */ + vcc_5v: vcc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; +}; + +&gmac1 { + status = "okay"; +}; + +/* + * i2c1 is exposed on CM1 / Module1A + * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu + * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu + */ +&i2c1 { + status = "okay"; + + /* + * the rtc interrupt is tied to PMIC_PWRON, + * it will force reset the board if triggered. + */ + pcf85063: rtc@51 { + compatible = "nxp,pcf85063"; + reg = <0x51>; + }; +}; + +/* + * i2c2 is exposed on CM1 / Module1A - to PI40 + * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch + * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 + */ +&i2c2 { + status = "disabled"; +}; + +/* + * i2c3 is exposed on CM1 / Module1A - to PI40 + * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 + * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 + */ +&i2c3 { + status = "disabled"; +}; + +/* + * i2c4 is exposed on CM2 / Module1B - to PI40 + * pin 45 - GPIO24 - i2c4_scl_m1 + * pin 47 - GPIO23 - i2c4_sda_m1 + */ +&i2c4 { + status = "disabled"; +}; + +/* + * i2s1_8ch is exposed on CM1 / Module1A - to PI40 + * pin 24 - GPIO26 - i2s1_sdi1_m1 + * pin 25 - GPIO21 - i2s1_sdo0_m1 + * pin 26 - GPIO19 - i2s1_lrck_tx_m1 + * pin 27 - GPIO20 - i2s1_sdi0_m1 + * pin 29 - GPIO16 - i2s1_sdi3_m1 + * pin 30 - GPIO6 - i2s1_sdi2_m1 + * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 + * pin 41 - GPIO25 - i2s1_sdo2_m1 + * pin 49 - GPIO18 - i2s1_sclk_tx_m1 + * pin 50 - GPIO17 - i2s1_mclk_m1 + * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 + */ +&i2s1_8ch { + status = "disabled"; +}; + +&led_diy { + status = "okay"; +}; + +&led_work { + status = "okay"; +}; + +&rgmii_phy1 { + status = "okay"; +}; + +/* + * saradc is exposed on CM1 / Module1A - to J2 + * pin 94 - AIN1 - saradc_vin3 + * pin 96 - AIN0 - saradc_vin2 + */ +&saradc { + status = "disabled"; +}; + +&sdmmc0 { + vmmc-supply = <&sdmmc_pwr>; + status = "okay"; +}; + +&sdmmc_pwr { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + status = "okay"; +}; + +/* + * spi3 is exposed on CM1 / Module1A - to PI40 + * pin 37 - GPIO7 - spi3_cs1_m0 + * pin 38 - GPIO11 - spi3_clk_m0 + * pin 39 - GPIO8 - spi3_cs0_m0 + * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch + * pin 44 - GPIO10 - spi3_mosi_m0 + */ +&spi3 { + status = "disabled"; +}; + +/* + * uart2 is exposed on CM1 / Module1A - to PI40 + * pin 51 - GPIO15 - uart2_rx_m0 + * pin 55 - GPIO14 - uart2_tx_m0 + */ +&uart2 { + status = "okay"; +}; + +/* + * uart7 is exposed on CM1 / Module1A - to PI40 + * pin 46 - GPIO22 - uart7_tx_m2 + * pin 47 - GPIO23 - uart7_rx_m2 + */ +&uart7 { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc_5v>; + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&vbus { + vin-supply = <&vcc_5v>; +}; diff --git a/dts/src/arm64/rockchip/rk3566-soquartz.dtsi b/dts/src/arm64/rockchip/rk3566-soquartz.dtsi new file mode 100644 index 0000000000..5bcd4be329 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3566-soquartz.dtsi @@ -0,0 +1,616 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include "rk3566.dtsi" + +/ { + model = "Pine64 RK3566 SoQuartz SOM"; + compatible = "pine64,soquartz", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + mmc2 = &sdmmc1; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + + led_diy: led-diy { + label = "diy-led"; + default-state = "on"; + gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&diy_led_enable_h>; + retain-state-suspended; + status = "disabled"; + }; + + led_work: led-work { + label = "work-led"; + default-state = "off"; + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_enable_h>; + retain-state-suspended; + status = "disabled"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + status = "okay"; + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; + }; + + vbus: vbus-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbus"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* sourced from vbus, vbus is provided by the carrier board */ + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vbus>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + sdmmc_pwr: sdmmc-pwr-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr_h>; + regulator-name = "sdmmc_pwr"; + status = "disabled"; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; + clock_in_out = "input"; + phy-supply = <&vcc_3v3>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m0_miim + &gmac1m0_tx_bus2 + &gmac1m0_rx_bus2 + &gmac1m0_rgmii_clk + &gmac1m0_clkinout + &gmac1m0_rgmii_bus>; + snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f, also works well here */ + snps,reset-delays-us = <0 20000 100000>; + tx_delay = <0x30>; + rx_delay = <0x10>; + phy-handle = <&rgmii_phy1>; + status = "disabled"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = ; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_npu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_image"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + status = "disabled"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + }; + }; +}; + +/* + * i2c1 is exposed on CM1 / Module1A + * pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu + * pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu + */ +&i2c1 { + status = "disabled"; +}; + +/* + * i2c2 is exposed on CM1 / Module1A + * pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch + * pin 58 - i2c2_sda_m1, pullup to vcc_3v3 + */ +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2m1_xfer>; + status = "disabled"; +}; + +/* + * i2c3 is exposed on CM1 / Module1A + * pin 35 - i2c3_scl_m0, pullup to vcc_3v3 + * pin 36 - i2c3_sda_m0, pullup to vcc_3v3 + */ +&i2c3 { + status = "disabled"; +}; + +/* + * i2c4 is exposed on CM2 / Module1B + * pin 45 - i2c4_scl_m1 + * pin 47 - i2c4_sda_m1 + */ +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4m1_xfer>; + status = "disabled"; +}; + +/* + * i2s1_8ch is exposed on CM1 / Module1A + * pin 24 - i2s1_sdi1_m1 + * pin 25 - i2s1_sdo0_m1 + * pin 26 - i2s1_lrck_tx_m1 + * pin 27 - i2s1_sdi0_m1 + * pin 29 - i2s1_sdi3_m1 + * pin 30 - i2s1_sdi2_m1 + * pin 40 - i2s1_sdo1_m1, shared with spi3 + * pin 41 - i2s1_sdo2_m1 + * pin 49 - i2s1_sclk_tx_m1 + * pin 50 - i2s1_mclk_m1 + * pin 56 - i2s1_sdo3_m1, shared with i2c2 + */ +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx + &i2s1m1_lrcktx &i2s1m1_lrckrx + &i2s1m1_sdi0 &i2s1m1_sdi1 + &i2s1m1_sdi2 &i2s1m1_sdi3 + &i2s1m1_sdo0 &i2s1m1_sdo1 + &i2s1m1_sdo2 &i2s1m1_sdo3>; + status = "disabled"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + status = "disabled"; + }; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + work_led_enable_h: work-led-enable-h { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_enable_h: diy-led-enable-h { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc-pwr { + sdmmc_pwr_h: sdmmc-pwr-h { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +/* + * saradc is exposed on CM1 / Module1A + * pin 94 - saradc_vin3 + * pin 96 - saradc_vin2 + */ +&saradc { + vref-supply = <&vcca_1v8>; + status = "disabled"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + broken-cd; + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vqmmc-supply = <&vccio_sd>; + status = "disabled"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +/* + * spi3 is exposed on CM1 / Module1A + * pin 37 - spi3_cs1_m0 + * pin 38 - spi3_clk_m0 + * pin 39 - spi3_cs0_m0 + * pin 40 - spi3_miso_m0, shared with i2s1_8ch + * pin 44 - spi3_mosi_m0 + */ +&spi3 { + status = "disabled"; +}; + +&tsadc { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca1v8_pmu>; + }; +}; + +/* + * uart2 is exposed on CM1 / Module1A + * pin 51 - uart2_rx_m0 + * pin 55 - uart2_tx_m0 + */ +&uart2 { + status = "disabled"; +}; + +/* + * uart7 is exposed on CM1 / Module1A + * pin 46 - uart7_tx_m2 + * pin 47 - uart7_rx_m2 + */ +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7m2_xfer>; + status = "disabled"; +}; + +/* dwc3_otg is the only usb port available */ +&usb2phy0 { + status = "disabled"; +}; + +&usb2phy0_otg { + status = "disabled"; +}; + +&usb_host0_xhci { + status = "disabled"; +}; diff --git a/dts/src/arm64/rockchip/rk3566.dtsi b/dts/src/arm64/rockchip/rk3566.dtsi index 3839eef5e4..0b957068ff 100644 --- a/dts/src/arm64/rockchip/rk3566.dtsi +++ b/dts/src/arm64/rockchip/rk3566.dtsi @@ -6,6 +6,10 @@ compatible = "rockchip,rk3566"; }; +&pipegrf { + compatible = "rockchip,rk3566-pipe-grf", "syscon"; +}; + &power { power-domain@RK3568_PD_PIPE { reg = ; @@ -18,3 +22,10 @@ #power-domain-cells = <0>; }; }; + +&usb_host0_xhci { + phys = <&usb2phy0_otg>; + phy-names = "usb2-phy"; + extcon = <&usb2phy0>; + maximum-speed = "high-speed"; +}; diff --git a/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts b/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts index 067fe4a6b1..40cf2236c0 100644 --- a/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts +++ b/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts @@ -73,6 +73,55 @@ regulator-max-microvolt = <5000000>; vin-supply = <&dc_12v>; }; + + vcc5v0_usb: vcc5v0_usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb_host: vcc5v0-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; +}; + +&combphy0 { + /* used for USB3 */ + status = "okay"; +}; + +&combphy1 { + /* used for USB3 */ + status = "okay"; +}; + +&combphy2 { + /* used for SATA */ + status = "okay"; }; &gmac0 { @@ -368,6 +417,16 @@ <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + usb { + vcc5v0_usb_host_en: vcc5v0_usb_host_en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pmu_io_domains { @@ -430,6 +489,10 @@ status = "okay"; }; +&sata2 { + status = "okay"; +}; + &sdhci { bus-width = <8>; max-frequency = <200000000>; @@ -485,3 +548,42 @@ pinctrl-0 = <&uart9m1_xfer>; status = "disabled"; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy0>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3568-evb1-v10.dts b/dts/src/arm64/rockchip/rk3568-evb1-v10.dts index a794a0ea5c..622be8be98 100644 --- a/dts/src/arm64/rockchip/rk3568-evb1-v10.dts +++ b/dts/src/arm64/rockchip/rk3568-evb1-v10.dts @@ -103,6 +103,18 @@ vin-supply = <&vcc5v0_usb>; }; + vcc5v0_usb_otg: vcc5v0-usb-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + vcc3v3_lcd0_n: vcc3v3-lcd0-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd0_n"; @@ -136,6 +148,14 @@ }; }; +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_cpu>; }; @@ -507,6 +527,9 @@ vcc5v0_usb_host_en: vcc5v0_usb_host_en { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; + vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; }; @@ -568,6 +591,11 @@ status = "okay"; }; +&usb_host0_xhci { + extcon = <&usb2phy0>; + status = "okay"; +}; + &usb_host1_ehci { status = "okay"; }; @@ -576,6 +604,24 @@ status = "okay"; }; +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + vbus-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + &usb2phy1 { status = "okay"; }; diff --git a/dts/src/arm64/rockchip/rk3568-rock-3a.dts b/dts/src/arm64/rockchip/rk3568-rock-3a.dts new file mode 100644 index 0000000000..0813c0c5ab --- /dev/null +++ b/dts/src/arm64/rockchip/rk3568-rock-3a.dts @@ -0,0 +1,562 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include +#include +#include +#include "rk3568.dtsi" + +/ { + model = "Radxa ROCK3 Model A"; + compatible = "radxa,rock3a", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + leds { + compatible = "gpio-leds"; + + led_user: led-0 { + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + color = ; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_user_en>; + }; + }; + + rk809-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb_host: vcc5v0-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb_hub: vcc5v0-usb-hub-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_hub_en>; + regulator-name = "vcc5v0_usb_hub"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; +}; + +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = ; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; + rockchip,system-power-controller; + #sound-dai-cells = <0>; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + codec { + mic-in-differential; + }; + }; +}; + +&i2s1_8ch { + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + pinctrl-names = "default"; + pinctrl-0 = <ð_phy_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + ethernet { + eth_phy_rst: eth_phy_rst { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_user_en: led_user_en { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_usb_host_en: vcc5v0_usb_host_en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + vcc5v0_usb_hub_en: vcc5v0_usb_hub_en { + rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy0>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + vbus-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3568.dtsi b/dts/src/arm64/rockchip/rk3568.dtsi index 5b0f528d68..5eafddf62e 100644 --- a/dts/src/arm64/rockchip/rk3568.dtsi +++ b/dts/src/arm64/rockchip/rk3568.dtsi @@ -8,6 +8,20 @@ / { compatible = "rockchip,rk3568"; + sata0: sata@fc000000 { + compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfc000000 0 0x1000>; + clocks = <&cru ACLK_SATA0>, <&cru CLK_SATA0_PMALIVE>, + <&cru CLK_SATA0_RXOOB>; + clock-names = "sata", "pmalive", "rxoob"; + interrupts = ; + phys = <&combphy0 PHY_TYPE_SATA>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + power-domains = <&power RK3568_PD_PIPE>; + status = "disabled"; + }; + pipe_phy_grf0: syscon@fdc70000 { compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; reg = <0x0 0xfdc70000 0x0 0x1000>; @@ -99,6 +113,10 @@ }; }; +&pipegrf { + compatible = "rockchip,rk3568-pipe-grf", "syscon"; +}; + &power { power-domain@RK3568_PD_PIPE { reg = ; @@ -114,3 +132,8 @@ #power-domain-cells = <0>; }; }; + +&usb_host0_xhci { + phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; +}; diff --git a/dts/src/arm64/rockchip/rk356x.dtsi b/dts/src/arm64/rockchip/rk356x.dtsi index 7cdef800cb..914f13c0d3 100644 --- a/dts/src/arm64/rockchip/rk356x.dtsi +++ b/dts/src/arm64/rockchip/rk356x.dtsi @@ -230,6 +230,68 @@ }; }; + sata1: sata@fc400000 { + compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfc400000 0 0x1000>; + clocks = <&cru ACLK_SATA1>, <&cru CLK_SATA1_PMALIVE>, + <&cru CLK_SATA1_RXOOB>; + clock-names = "sata", "pmalive", "rxoob"; + interrupts = ; + phys = <&combphy1 PHY_TYPE_SATA>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + power-domains = <&power RK3568_PD_PIPE>; + status = "disabled"; + }; + + sata2: sata@fc800000 { + compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfc800000 0 0x1000>; + clocks = <&cru ACLK_SATA2>, <&cru CLK_SATA2_PMALIVE>, + <&cru CLK_SATA2_RXOOB>; + clock-names = "sata", "pmalive", "rxoob"; + interrupts = ; + phys = <&combphy2 PHY_TYPE_SATA>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + power-domains = <&power RK3568_PD_PIPE>; + status = "disabled"; + }; + + usb_host0_xhci: usb@fcc00000 { + compatible = "rockchip,rk3568-dwc3", "snps,dwc3"; + reg = <0x0 0xfcc00000 0x0 0x400000>; + interrupts = ; + clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>, + <&cru ACLK_USB3OTG0>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk"; + dr_mode = "otg"; + phy_type = "utmi_wide"; + power-domains = <&power RK3568_PD_PIPE>; + resets = <&cru SRST_USB3OTG0>; + snps,dis_u2_susphy_quirk; + status = "disabled"; + }; + + usb_host1_xhci: usb@fd000000 { + compatible = "rockchip,rk3568-dwc3", "snps,dwc3"; + reg = <0x0 0xfd000000 0x0 0x400000>; + interrupts = ; + clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>, + <&cru ACLK_USB3OTG1>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk"; + dr_mode = "host"; + phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + power-domains = <&power RK3568_PD_PIPE>; + resets = <&cru SRST_USB3OTG1>; + snps,dis_u2_susphy_quirk; + status = "disabled"; + }; + gic: interrupt-controller@fd400000 { compatible = "arm,gic-v3"; reg = <0x0 0xfd400000 0 0x10000>, /* GICD */ @@ -297,7 +359,6 @@ }; pipegrf: syscon@fdc50000 { - compatible = "rockchip,rk3568-pipe-grf", "syscon"; reg = <0x0 0xfdc50000 0x0 0x1000>; }; @@ -336,6 +397,8 @@ cru: clock-controller@fdd20000 { compatible = "rockchip,rk3568-cru"; reg = <0x0 0xfdd20000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>; @@ -717,6 +780,17 @@ status = "disabled"; }; + sfc: spi@fe300000 { + compatible = "rockchip,sfc"; + reg = <0x0 0xfe300000 0x0 0x4000>; + interrupts = ; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + pinctrl-0 = <&fspi_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + sdhci: mmc@fe310000 { compatible = "rockchip,rk3568-dwcmshc"; reg = <0x0 0xfe310000 0x0 0x10000>; diff --git a/dts/src/arm64/sprd/whale2.dtsi b/dts/src/arm64/sprd/whale2.dtsi index 79b9591c37..89d91abbd5 100644 --- a/dts/src/arm64/sprd/whale2.dtsi +++ b/dts/src/arm64/sprd/whale2.dtsi @@ -126,7 +126,9 @@ reg = <0 0x20100000 0 0x4000>; interrupts = ; #dma-cells = <1>; + /* For backwards compatibility: */ #dma-channels = <32>; + dma-channels = <32>; clock-names = "enable"; clocks = <&apahb_gate CLK_DMA_EB>; }; @@ -272,7 +274,9 @@ compatible = "sprd,sc9860-dma"; reg = <0 0x41580000 0 0x4000>; #dma-cells = <1>; + /* For backwards compatibility: */ #dma-channels = <32>; + dma-channels = <32>; clock-names = "enable", "ashb_eb"; clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>, <&agcp_gate CLK_AGCP_AP_ASHB_EB>; diff --git a/dts/src/arm64/synaptics/as370.dtsi b/dts/src/arm64/synaptics/as370.dtsi deleted file mode 100644 index 4bb5d650df..0000000000 --- a/dts/src/arm64/synaptics/as370.dtsi +++ /dev/null @@ -1,173 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2018 Synaptics Incorporated - * - * Author: Jisheng Zhang - */ - -#include - -/ { - compatible = "syna,as370"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <0x0>; - enable-method = "psci"; - next-level-cache = <&l2>; - cpu-idle-states = <&CPU_SLEEP_0>; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <0x1>; - enable-method = "psci"; - next-level-cache = <&l2>; - cpu-idle-states = <&CPU_SLEEP_0>; - }; - - cpu2: cpu@2 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <0x2>; - enable-method = "psci"; - next-level-cache = <&l2>; - cpu-idle-states = <&CPU_SLEEP_0>; - }; - - cpu3: cpu@3 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <0x3>; - enable-method = "psci"; - next-level-cache = <&l2>; - cpu-idle-states = <&CPU_SLEEP_0>; - }; - - l2: cache { - compatible = "cache"; - }; - - idle-states { - entry-method = "psci"; - CPU_SLEEP_0: cpu-sleep-0 { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x0010000>; - entry-latency-us = <75>; - exit-latency-us = <155>; - min-residency-us = <1000>; - }; - }; - }; - - osc: osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = , - , - , - ; - interrupt-affinity = <&cpu0>, - <&cpu1>, - <&cpu2>, - <&cpu3>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - - soc@f7000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xf7000000 0x1000000>; - - gic: interrupt-controller@901000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x901000 0x1000>, - <0x902000 0x2000>, - <0x904000 0x2000>, - <0x906000 0x2000>; - interrupts = ; - }; - - apb@e80000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xe80000 0x10000>; - - uart0: serial@c00 { - compatible = "snps,dw-apb-uart"; - reg = <0xc00 0x100>; - interrupts = ; - clocks = <&osc>; - reg-shift = <2>; - status = "disabled"; - }; - - gpio0: gpio@1800 { - compatible = "snps,dw-apb-gpio"; - reg = <0x1800 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - porta: gpio-port@0 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - ngpios = <32>; - reg = <0>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = ; - }; - }; - - gpio1: gpio@2000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x2000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - portb: gpio-port@1 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - ngpios = <32>; - reg = <0>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = ; - }; - }; - }; - }; -}; diff --git a/dts/src/arm64/tesla/fsd.dtsi b/dts/src/arm64/tesla/fsd.dtsi index 9a652abcbc..af39655331 100644 --- a/dts/src/arm64/tesla/fsd.dtsi +++ b/dts/src/arm64/tesla/fsd.dtsi @@ -432,8 +432,6 @@ reg = <0x0 0x10100000 0x0 0x1000>; interrupts = ; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&clock_imem IMEM_DMA0_IPCLKPORT_ACLK>; clock-names = "apb_pclk"; iommus = <&smmu_imem 0x800 0x0>; @@ -444,8 +442,6 @@ reg = <0x0 0x10110000 0x0 0x1000>; interrupts = ; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&clock_imem IMEM_DMA1_IPCLKPORT_ACLK>; clock-names = "apb_pclk"; iommus = <&smmu_imem 0x801 0x0>; @@ -456,8 +452,6 @@ reg = <0x0 0x14280000 0x0 0x1000>; interrupts = ; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&clock_peric PERIC_DMA0_IPCLKPORT_ACLK>; clock-names = "apb_pclk"; iommus = <&smmu_peric 0x2 0x0>; @@ -468,8 +462,6 @@ reg = <0x0 0x14290000 0x0 0x1000>; interrupts = ; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&clock_peric PERIC_DMA1_IPCLKPORT_ACLK>; clock-names = "apb_pclk"; iommus = <&smmu_peric 0x1 0x0>; @@ -727,7 +719,7 @@ }; timer@10040000 { - compatible = "samsung,exynos4210-mct"; + compatible = "tesla,fsd-mct", "samsung,exynos4210-mct"; reg = <0x0 0x10040000 0x0 0x800>; interrupts = , , diff --git a/dts/src/arm64/ti/k3-am62-main.dtsi b/dts/src/arm64/ti/k3-am62-main.dtsi index c68472c692..d08abad0bc 100644 --- a/dts/src/arm64/ti/k3-am62-main.dtsi +++ b/dts/src/arm64/ti/k3-am62-main.dtsi @@ -6,6 +6,14 @@ */ &cbass_main { + oc_sram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x00 0x70000000 0x00 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x70000000 0x10000>; + }; + gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; #address-cells = <2>; @@ -40,6 +48,12 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x00 0x00100000 0x20000>; + + phy_gmii_sel: phy@4044 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4044 0x8>; + #phy-cells = <1>; + }; }; dmss: bus@48000000 { @@ -61,6 +75,69 @@ interrupt-names = "rx_012"; interrupts = ; }; + + inta_main_dmss: interrupt-controller@48000000 { + compatible = "ti,sci-inta"; + reg = <0x00 0x48000000 0x00 0x100000>; + #interrupt-cells = <0>; + interrupt-controller; + interrupt-parent = <&gic500>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <28>; + ti,interrupt-ranges = <4 68 36>; + ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>; + }; + + main_bcdma: dma-controller@485c0100 { + compatible = "ti,am64-dmss-bcdma"; + reg = <0x00 0x485c0100 0x00 0x100>, + <0x00 0x4c000000 0x00 0x20000>, + <0x00 0x4a820000 0x00 0x20000>, + <0x00 0x4aa40000 0x00 0x20000>, + <0x00 0x4bc00000 0x00 0x100000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&inta_main_dmss>; + #dma-cells = <3>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <26>; + ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ + ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ + ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ + }; + + main_pktdma: dma-controller@485c0000 { + compatible = "ti,am64-dmss-pktdma"; + reg = <0x00 0x485c0000 0x00 0x100>, + <0x00 0x4a800000 0x00 0x20000>, + <0x00 0x4aa00000 0x00 0x40000>, + <0x00 0x4b800000 0x00 0x400000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&inta_main_dmss>; + #dma-cells = <2>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <30>; + ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */ + <0x24>, /* CPSW_TX_CHAN */ + <0x25>, /* SAUL_TX_0_CHAN */ + <0x26>; /* SAUL_TX_1_CHAN */ + ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */ + <0x11>, /* RING_CPSW_TX_CHAN */ + <0x12>, /* RING_SAUL_TX_0_CHAN */ + <0x13>; /* RING_SAUL_TX_1_CHAN */ + ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */ + <0x2b>, /* CPSW_RX_CHAN */ + <0x2d>, /* SAUL_RX_0_CHAN */ + <0x2f>, /* SAUL_RX_1_CHAN */ + <0x31>, /* SAUL_RX_2_CHAN */ + <0x33>; /* SAUL_RX_3_CHAN */ + ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */ + <0x2c>, /* FLOW_CPSW_RX_CHAN */ + <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */ + <0x32>; /* FLOW_SAUL_RX_2/3_CHAN */ + }; }; dmsc: system-controller@44043000 { @@ -203,6 +280,36 @@ clock-names = "fck"; }; + main_spi0: spi@20100000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x20100000 0x00 0x400>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 172 0>; + }; + + main_spi1: spi@20110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20110000 0x00 0x400>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 173 0>; + }; + + main_spi2: spi@20120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20120000 0x00 0x400>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 174 0>; + }; + main_gpio_intr: interrupt-controller@a00000 { compatible = "ti,sci-intr"; reg = <0x00 0x00a00000 0x00 0x800>; @@ -249,6 +356,165 @@ clock-names = "gpio"; }; + sdhci0: mmc@fa10000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0x0fa10000 0x00 0x1000>, <0x00 0x0fa18000 0x00 0x400>; + interrupts = ; + power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 57 5>, <&k3_clks 57 6>; + clock-names = "clk_ahb", "clk_xin"; + assigned-clocks = <&k3_clks 57 6>; + assigned-clock-parents = <&k3_clks 57 8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + ti,trm-icp = <0x2>; + bus-width = <8>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-ddr52 = <0x9>; + ti,otap-del-sel-hs200 = <0x6>; + }; + + sdhci1: mmc@fa00000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0x0fa00000 0x00 0x1000>, <0x00 0x0fa08000 0x00 0x400>; + interrupts = ; + power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; + clock-names = "clk_ahb", "clk_xin"; + ti,trm-icp = <0x2>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; + ti,clkbuf-sel = <0x7>; + bus-width = <4>; + }; + + sdhci2: mmc@fa20000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0x0fa20000 0x00 0x1000>, <0x00 0x0fa28000 0x00 0x400>; + interrupts = ; + power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 184 5>, <&k3_clks 184 6>; + clock-names = "clk_ahb", "clk_xin"; + ti,trm-icp = <0x2>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; + ti,clkbuf-sel = <0x7>; + }; + + fss: bus@fc00000 { + compatible = "simple-bus"; + reg = <0x00 0x0fc00000 0x00 0x70000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ospi0: spi@fc40000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x0fc40000 0x00 0x100>, + <0x05 0x00000000 0x01 0x00000000>; + interrupts = ; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 75 7>; + assigned-clocks = <&k3_clks 75 7>; + assigned-clock-parents = <&k3_clks 75 8>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cpsw3g: ethernet@8000000 { + compatible = "ti,am642-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x00 0x08000000 0x00 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x00 0x00 0x00 0x08000000 0x00 0x200000>; + clocks = <&k3_clks 13 0>; + assigned-clocks = <&k3_clks 13 3>; + assigned-clock-parents = <&k3_clks 13 11>; + clock-names = "fck"; + power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&main_pktdma 0xc600 15>, + <&main_pktdma 0xc601 15>, + <&main_pktdma 0xc602 15>, + <&main_pktdma 0xc603 15>, + <&main_pktdma 0xc604 15>, + <&main_pktdma 0xc605 15>, + <&main_pktdma 0xc606 15>, + <&main_pktdma 0xc607 15>, + <&main_pktdma 0x4600 15>; + dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", + "tx7", "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + phys = <&phy_gmii_sel 1>; + mac-address = [00 00 00 00 00 00]; + ti,syscon-efuse = <&wkup_conf 0x200>; + }; + + cpsw_port2: port@2 { + reg = <2>; + ti,mac-only; + label = "port2"; + phys = <&phy_gmii_sel 2>; + mac-address = [00 00 00 00 00 00]; + }; + }; + + cpsw3g_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x00 0xf00 0x00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 13 0>; + clock-names = "fck"; + bus_freq = <1000000>; + }; + + cpts@3d000 { + compatible = "ti,j721e-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; + clocks = <&k3_clks 13 3>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + hwspinlock: spinlock@2a000000 { compatible = "ti,am64-hwspinlock"; reg = <0x00 0x2a000000 0x00 0x1000>; @@ -264,4 +530,45 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; }; + + ecap0: pwm@23100000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23100000 0x00 0x100>; + power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 51 0>; + clock-names = "fck"; + }; + + ecap1: pwm@23110000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23110000 0x00 0x100>; + power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 52 0>; + clock-names = "fck"; + }; + + ecap2: pwm@23120000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23120000 0x00 0x100>; + power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 53 0>; + clock-names = "fck"; + }; + + main_mcan0: can@20701000 { + compatible = "bosch,m_can"; + reg = <0x00 0x20701000 0x00 0x200>, + <0x00 0x20708000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 98 6>, <&k3_clks 98 1>; + clock-names = "hclk", "cclk"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + }; }; diff --git a/dts/src/arm64/ti/k3-am62-mcu.dtsi b/dts/src/arm64/ti/k3-am62-mcu.dtsi index 9d210d55fc..f56c803560 100644 --- a/dts/src/arm64/ti/k3-am62-mcu.dtsi +++ b/dts/src/arm64/ti/k3-am62-mcu.dtsi @@ -33,4 +33,52 @@ clocks = <&k3_clks 106 2>; clock-names = "fck"; }; + + mcu_spi0: spi@4b00000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x04b00000 0x00 0x400>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 147 0>; + }; + + mcu_spi1: spi@4b10000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x04b10000 0x00 0x400>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 148 0>; + }; + + mcu_gpio_intr: interrupt-controller@4210000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x04210000 0x00 0x200>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <5>; + ti,interrupt-ranges = <0 104 4>; + }; + + mcu_gpio0: gpio@4201000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x4201000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&mcu_gpio_intr>; + interrupts = <30>, <31>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <24>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 79 0>; + clock-names = "gpio"; + }; }; diff --git a/dts/src/arm64/ti/k3-am62.dtsi b/dts/src/arm64/ti/k3-am62.dtsi index bc2997b185..37fcbe7a3c 100644 --- a/dts/src/arm64/ti/k3-am62.dtsi +++ b/dts/src/arm64/ti/k3-am62.dtsi @@ -66,6 +66,7 @@ <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */ <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */ <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */ + <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */ <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */ <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */ diff --git a/dts/src/arm64/ti/k3-am625-sk.dts b/dts/src/arm64/ti/k3-am625-sk.dts index 0de4113ccd..39fb1d7630 100644 --- a/dts/src/arm64/ti/k3-am625-sk.dts +++ b/dts/src/arm64/ti/k3-am625-sk.dts @@ -9,6 +9,7 @@ #include #include +#include #include "k3-am625.dtsi" / { @@ -17,6 +18,12 @@ aliases { serial2 = &main_uart0; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + mmc2 = &sdhci2; + spi0 = &ospi0; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; }; chosen { @@ -87,6 +94,33 @@ regulator-boot-on; }; + vdd_mmc1: regulator-3 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vcc_3v3_sys>; + gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + }; + + vdd_sd_dv: regulator-4 { + /* Output of TLV71033 */ + compatible = "regulator-gpio"; + regulator-name = "tlv71033"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vcc_5v0>; + gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -124,11 +158,114 @@ >; }; + main_i2c2_pins_default: main-i2c2-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ + AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ + >; + }; + + main_mmc0_pins_default: main-mmc0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ + AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ + AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */ + AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */ + AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ + AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ + AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */ + >; + }; + usr_led_pins_default: usr-led-pins-default { pinctrl-single,pins = < AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ >; }; + + main_mdio1_pins_default: main-mdio1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */ + AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */ + >; + }; + + main_rgmii1_pins_default: main-rgmii1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */ + AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */ + AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */ + AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */ + AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */ + AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */ + AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */ + AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */ + AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */ + AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */ + AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */ + AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */ + >; + }; + + main_rgmii2_pins_default: main-rgmii2-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ + AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */ + AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */ + AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */ + AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */ + AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */ + AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */ + AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */ + AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */ + AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */ + AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */ + AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */ + >; + }; + + ospi0_pins_default: ospi0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */ + AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ + AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */ + AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */ + AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */ + AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */ + AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */ + AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */ + AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */ + AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */ + AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */ + >; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */ + >; + }; + + main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ + >; + }; }; &wkup_uart0 { @@ -188,6 +325,33 @@ pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; + + exp1: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", + "PRU_DETECT", "MMC1_SD_EN", + "VPP_LDO_EN", "EXP_PS_3V3_En", + "EXP_PS_5V0_En", "EXP_HAT_DETECT", + "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn", + "UART1_FET_BUF_EN", "WL_LT_EN", + "GPIO_HDMI_RSTn", "CSI_GPIO1", + "CSI_GPIO2", "PRU_3V3_EN", + "HDMI_INTn", "TEST_GPIO2", + "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", + "MCASP1_FET_SEL", "UART1_FET_SEL", + "TSINT#", "IO_EXP_TEST_LED"; + + interrupt-parent = <&main_gpio1>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; + }; }; &main_i2c2 { @@ -198,9 +362,134 @@ status = "disabled"; }; +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio1_pins_default + &main_rgmii1_pins_default + &main_rgmii2_pins_default>; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw_port2 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy1>; +}; + +&cpsw3g_mdio { + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = ; + ti,fifo-depth = ; + ti,min-output-impedance; + }; + + cpsw3g_phy1: ethernet-phy@1 { + reg = <1>; + ti,rx-internal-delay = ; + ti,fifo-depth = ; + ti,min-output-impedance; + }; +}; + &mailbox0_cluster0 { mbox_m4_0: mbox-m4-0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; }; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "ospi.env.backup"; + reg = <0x6c0000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; + }; +}; + +&ecap0 { + status = "disabled"; +}; + +&ecap1 { + status = "disabled"; +}; + +&ecap2 { + status = "disabled"; +}; + +&main_mcan0 { + status = "disabled"; +}; diff --git a/dts/src/arm64/ti/k3-am64-mcu.dtsi b/dts/src/arm64/ti/k3-am64-mcu.dtsi index 2bb5c9ff17..02d4285acb 100644 --- a/dts/src/arm64/ti/k3-am64-mcu.dtsi +++ b/dts/src/arm64/ti/k3-am64-mcu.dtsi @@ -10,7 +10,6 @@ compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a00000 0x00 0x100>; interrupts = ; - clock-frequency = <48000000>; current-speed = <115200>; power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 149 0>; @@ -21,7 +20,6 @@ compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a10000 0x00 0x100>; interrupts = ; - clock-frequency = <48000000>; current-speed = <115200>; power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 160 0>; diff --git a/dts/src/arm64/ti/k3-am642-sk.dts b/dts/src/arm64/ti/k3-am642-sk.dts index 1d7db8bf3a..59f506cbd2 100644 --- a/dts/src/arm64/ti/k3-am642-sk.dts +++ b/dts/src/arm64/ti/k3-am642-sk.dts @@ -125,6 +125,31 @@ vin-supply = <&vcc_3v3_sys>; gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; }; + + com8_ls_en: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "com8_ls_en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + pinctrl-0 = <&main_com8_ls_en_pins_default>; + pinctrl-names = "default"; + gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>; + }; + + wlan_en: regulator-2 { + /* output of SN74AVC4T245RSVR */ + compatible = "regulator-fixed"; + regulator-name = "wlan_en"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + pinctrl-0 = <&main_wlan_en_pins_default>; + pinctrl-names = "default"; + vin-supply = <&com8_ls_en>; + gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>; + }; }; &main_pmx0 { @@ -216,6 +241,23 @@ AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ >; }; + main_wlan_en_pins_default: main-wlan-en-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */ + >; + }; + + main_com8_ls_en_pins_default: main-com8-ls-en-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */ + >; + }; + + main_wlan_pins_default: main-wlan-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */ + >; + }; }; &mcu_uart0 { @@ -293,6 +335,26 @@ status = "reserved"; }; +&sdhci0 { + vmmc-supply = <&wlan_en>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + ti,driver-strength-ohm = <50>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + pinctrl-0 = <&main_wlan_pins_default>; + pinctrl-names = "default"; + interrupt-parent = <&main_gpio0>; + interrupts = <46 IRQ_TYPE_EDGE_FALLING>; + }; +}; + &sdhci1 { /* SD/MMC */ vmmc-supply = <&vdd_mmc1>; diff --git a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts index f5ca8e26ed..2bc26a2964 100644 --- a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts +++ b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts @@ -148,6 +148,28 @@ pinctrl-0 = <&main_mcan2_gpio_pins_default>; standby-gpios = <&main_gpio0 127 GPIO_ACTIVE_HIGH>; }; + + dp_pwr_3v3: regulator-dp-pwr { + compatible = "regulator-fixed"; + regulator-name = "dp-pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&exp4 0 GPIO_ACTIVE_HIGH>; /* P0 - DP0_PWR_SW_EN */ + enable-active-high; + }; + + dp0: connector { + compatible = "dp-connector"; + label = "DP0"; + type = "full-size"; + dp-pwr-supply = <&dp_pwr_3v3>; + + port { + dp_connector_in: endpoint { + remote-endpoint = <&dp0_out>; + }; + }; + }; }; &main_pmx0 { @@ -190,6 +212,12 @@ >; }; + dp0_pins_default: dp0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ + >; + }; + main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */ @@ -658,6 +686,33 @@ <&k3_clks 152 18>; /* PLL23_HSDIV0 */ }; +&dss_ports { + port { + dpi0_out: endpoint { + remote-endpoint = <&dp0_in>; + }; + }; +}; + +&dp0_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@4 { + reg = <4>; + dp0_out: endpoint { + remote-endpoint = <&dp_connector_in>; + }; + }; +}; + &mcasp0 { status = "disabled"; }; @@ -793,6 +848,24 @@ }; }; +&serdes4 { + torrent_phy_dp: phy@0 { + reg = <0>; + resets = <&serdes_wiz4 1>; + cdns,phy-type = ; + cdns,num-lanes = <4>; + cdns,max-bit-rate = <5400>; + #phy-cells = <0>; + }; +}; + +&mhdp { + phys = <&torrent_phy_dp>; + phy-names = "dpphy"; + pinctrl-names = "default"; + pinctrl-0 = <&dp0_pins_default>; +}; + &pcie0_rc { reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; phys = <&serdes0_pcie_link>; @@ -843,10 +916,6 @@ status = "disabled"; }; -&dss { - status = "disabled"; -}; - &icssg0_mdio { status = "disabled"; }; diff --git a/dts/src/arm64/ti/k3-j721e-main.dtsi b/dts/src/arm64/ti/k3-j721e-main.dtsi index db0669985e..43b6cf5791 100644 --- a/dts/src/arm64/ti/k3-j721e-main.dtsi +++ b/dts/src/arm64/ti/k3-j721e-main.dtsi @@ -5,6 +5,7 @@ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ */ #include +#include #include #include @@ -789,6 +790,47 @@ #size-cells = <2>; }; + serdes_wiz4: wiz@5050000 { + compatible = "ti,am64-wiz-10g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 297 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 297 1>, <&k3_clks 297 9>, <&cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 297 9>; + assigned-clock-parents = <&k3_clks 297 10>; + assigned-clock-rates = <19200000>; + num-lanes = <4>; + #reset-cells = <1>; + #clock-cells = <1>; + ranges = <0x05050000 0x00 0x05050000 0x010000>, + <0x0a030a00 0x00 0x0a030a00 0x40>; + + serdes4: serdes@5050000 { + /* + * Note: we also map DPTX PHY registers as the Torrent + * needs to manage those. + */ + compatible = "ti,j721e-serdes-10g"; + reg = <0x05050000 0x010000>, + <0x0a030a00 0x40>; /* DPTX PHY */ + reg-names = "torrent_phy", "dptx_phy"; + + resets = <&serdes_wiz4 0>; + reset-names = "torrent_reset"; + clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>; + clock-names = "refclk"; + assigned-clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz4 TI_WIZ_PLL1_REFCLK>, + <&serdes_wiz4 TI_WIZ_REFCLK_DIG>; + assigned-clock-parents = <&k3_clks 297 9>, + <&k3_clks 297 9>, + <&k3_clks 297 9>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; @@ -1267,6 +1309,37 @@ }; }; + mhdp: dp-bridge@a000000 { + compatible = "ti,j721e-mhdp8546"; + /* + * Note: we do not map DPTX PHY area, as that is handled by + * the PHY driver. + */ + reg = <0x00 0x0a000000 0x00 0x030a00>, /* DSS_EDP0_V2A_CORE_VP_REGS_APB */ + <0x00 0x04f40000 0x00 0x20>; /* DSS_EDP0_INTG_CFG_VP */ + reg-names = "mhdptx", "j721e-intg"; + + clocks = <&k3_clks 151 36>; + + interrupt-parent = <&gic500>; + interrupts = ; + + power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>; + + dp0_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@4 { + reg = <4>; + }; + }; + }; + dss: dss@4a00000 { compatible = "ti,j721e-dss"; reg = @@ -1317,8 +1390,6 @@ "common_s2"; dss_ports: ports { - #address-cells = <1>; - #size-cells = <0>; }; }; diff --git a/dts/src/arm64/ti/k3-j721e-sk.dts b/dts/src/arm64/ti/k3-j721e-sk.dts index f25d85169e..80358cba69 100644 --- a/dts/src/arm64/ti/k3-j721e-sk.dts +++ b/dts/src/arm64/ti/k3-j721e-sk.dts @@ -213,6 +213,71 @@ enable-active-high; }; + dp0: connector { + compatible = "dp-connector"; + label = "DP0"; + type = "full-size"; + dp-pwr-supply = <&dp_pwr_3v3>; + + port { + dp_connector_in: endpoint { + remote-endpoint = <&dp0_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_pins_default>; + + ddc-i2c-bus = <&main_i2c1>; + + /* HDMI_HPD */ + hpd-gpios = <&main_gpio1 0 GPIO_ACTIVE_HIGH>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + dvi-bridge { + compatible = "ti,tfp410"; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pdn_pins_default>; + + powerdown-gpios = <&main_gpio0 127 GPIO_ACTIVE_LOW>; + ti,deskew = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <&dpi1_out>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint { + remote-endpoint = + <&hdmi_connector_in>; + }; + }; + }; + }; }; &main_pmx0 { @@ -317,6 +382,18 @@ >; }; + hdmi_hpd_pins_default: hdmi-hpd-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x204, PIN_INPUT, 7) /* (AD5) UART1_RTSn.GPIO1_0 */ + >; + }; + + hdmi_pdn_pins_default: hdmi-pdn-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */ + >; + }; + /* Reset for M.2 E Key slot on PCIe0 */ ekey_reset_pins_default: ekey-reset-pns-pins-default { pinctrl-single,pins = < @@ -624,6 +701,24 @@ }; }; +&serdes4 { + torrent_phy_dp: phy@0 { + reg = <0>; + resets = <&serdes_wiz4 1>; + cdns,phy-type = ; + cdns,num-lanes = <4>; + cdns,max-bit-rate = <5400>; + #phy-cells = <0>; + }; +}; + +&mhdp { + phys = <&torrent_phy_dp>; + phy-names = "dpphy"; + pinctrl-names = "default"; + pinctrl-0 = <&dp0_pins_default>; +}; + &usbss0 { pinctrl-names = "default"; pinctrl-0 = <&main_usbss0_pins_default>; @@ -702,6 +797,46 @@ <&k3_clks 152 18>; /* DPI1_EXT_CLKSEL_OUT0 */ }; +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpi0_out: endpoint { + remote-endpoint = <&dp0_in>; + }; + }; + + port@1 { + reg = <1>; + + dpi1_out: endpoint { + remote-endpoint = <&tfp410_in>; + }; + }; +}; + +&dp0_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@4 { + reg = <4>; + dp0_out: endpoint { + remote-endpoint = <&dp_connector_in>; + }; + }; +}; + &mcasp0 { /* Unused */ status = "disabled"; @@ -836,10 +971,6 @@ status = "disabled"; }; -&dss { - status = "disabled"; -}; - &icssg0_mdio { status = "disabled"; }; diff --git a/dts/src/arm64/toshiba/tmpv7708-rm-mbrc.dts b/dts/src/arm64/toshiba/tmpv7708-rm-mbrc.dts index 9375b0faee..d209fdc985 100644 --- a/dts/src/arm64/toshiba/tmpv7708-rm-mbrc.dts +++ b/dts/src/arm64/toshiba/tmpv7708-rm-mbrc.dts @@ -32,22 +32,16 @@ &uart0 { status = "okay"; - clocks = <&uart_clk>; - clock-names = "apb_pclk"; }; &uart1 { status = "okay"; - clocks = <&uart_clk>; - clock-names = "apb_pclk"; }; &piether { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - clocks = <&clk300mhz>, <&clk125mhz>; - clock-names = "stmmaceth", "phy_ref_clk"; mdio0 { #address-cells = <1>; @@ -62,7 +56,6 @@ &wdt { status = "okay"; - clocks = <&wdt_clk>; }; &gpio { @@ -79,6 +72,4 @@ &pcie { status = "okay"; - clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>; - clock-names = "ref", "core", "aux"; }; diff --git a/dts/src/arm64/toshiba/tmpv7708-visrobo-vrb.dts b/dts/src/arm64/toshiba/tmpv7708-visrobo-vrb.dts index d081746370..ed7aa7e457 100644 --- a/dts/src/arm64/toshiba/tmpv7708-visrobo-vrb.dts +++ b/dts/src/arm64/toshiba/tmpv7708-visrobo-vrb.dts @@ -32,22 +32,16 @@ &uart0 { status = "okay"; - clocks = <&uart_clk>; - clock-names = "apb_pclk"; }; &uart1 { status = "okay"; - clocks = <&uart_clk>; - clock-names = "apb_pclk"; }; &piether { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - clocks = <&clk300mhz>, <&clk125mhz>; - clock-names = "stmmaceth", "phy_ref_clk"; mdio0 { #address-cells = <1>; diff --git a/dts/src/arm64/toshiba/tmpv7708-visrobo-vrc.dtsi b/dts/src/arm64/toshiba/tmpv7708-visrobo-vrc.dtsi index f0a93db6dd..0c8321022a 100644 --- a/dts/src/arm64/toshiba/tmpv7708-visrobo-vrc.dtsi +++ b/dts/src/arm64/toshiba/tmpv7708-visrobo-vrc.dtsi @@ -13,7 +13,6 @@ &wdt { status = "okay"; - clocks = <&wdt_clk>; }; &gpio { @@ -26,8 +25,6 @@ &spi0 { status = "okay"; - clocks = <&clk300mhz>, <&clk150mhz>; - clock-names = "sspclk", "apb_pclk"; mmc-slot@0 { compatible = "mmc-spi-slot"; @@ -40,5 +37,4 @@ &i2c0 { status = "okay"; - clocks = <&clk150mhz>; }; diff --git a/dts/src/arm64/toshiba/tmpv7708.dtsi b/dts/src/arm64/toshiba/tmpv7708.dtsi index 01d7ee61ad..0fc32c036f 100644 --- a/dts/src/arm64/toshiba/tmpv7708.dtsi +++ b/dts/src/arm64/toshiba/tmpv7708.dtsi @@ -7,6 +7,7 @@ * */ +#include #include #include @@ -128,47 +129,6 @@ ; }; - uart_clk: uart-clk { - compatible = "fixed-clock"; - clock-frequency = <150000000>; - #clock-cells = <0>; - }; - - clk25mhz: clk25mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - clock-output-names = "clk25mhz"; - }; - - clk125mhz: clk125mhz { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - #clock-cells = <0>; - clock-output-names = "clk125mhz"; - }; - - clk150mhz: clk150mhz { - compatible = "fixed-clock"; - clock-frequency = <150000000>; - #clock-cells = <0>; - clock-output-names = "clk150mhz"; - }; - - clk300mhz: clk300mhz { - compatible = "fixed-clock"; - clock-frequency = <300000000>; - #clock-cells = <0>; - clock-output-names = "clk300mhz"; - }; - - clk600mhz: clk600mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <600000000>; - clock-output-names = "clk600mhz"; - }; - extclk100mhz: extclk100mhz { compatible = "fixed-clock"; #clock-cells = <0>; @@ -176,9 +136,9 @@ clock-output-names = "extclk100mhz"; }; - wdt_clk: wdt-clk { + osc2_clk: osc2-clk { compatible = "fixed-clock"; - clock-frequency = <150000000>; + clock-frequency = <20000000>; #clock-cells = <0>; }; @@ -216,12 +176,28 @@ interrupt-parent = <&gic>; }; + pipllct: clock-controller@24220000 { + compatible = "toshiba,tmpv7708-pipllct"; + reg = <0 0x24220000 0 0x820>; + #clock-cells = <1>; + clocks = <&osc2_clk>; + }; + + pismu: syscon@24200000 { + compatible = "toshiba,tmpv7708-pismu", "syscon"; + reg = <0 0x24200000 0 0x2140>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + uart0: serial@28200000 { compatible = "arm,pl011", "arm,primecell"; reg = <0 0x28200000 0 0x1000>; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; + clocks = <&pismu TMPV770X_CLK_PIUART0>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -231,6 +207,8 @@ interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; + clocks = <&pismu TMPV770X_CLK_PIUART1>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -240,6 +218,8 @@ interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; + clocks = <&pismu TMPV770X_CLK_PIUART2>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -249,6 +229,8 @@ interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; + clocks = <&pismu TMPV770X_CLK_PIUART2>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -261,6 +243,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C0>; status = "disabled"; }; @@ -273,6 +256,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C1>; status = "disabled"; }; @@ -285,6 +269,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C2>; status = "disabled"; }; @@ -297,6 +282,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C3>; status = "disabled"; }; @@ -309,6 +295,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C4>; status = "disabled"; }; @@ -321,6 +308,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C5>; status = "disabled"; }; @@ -333,6 +321,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C6>; status = "disabled"; }; @@ -345,6 +334,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C7>; status = "disabled"; }; @@ -357,6 +347,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C8>; status = "disabled"; }; @@ -369,6 +360,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI1>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -381,6 +374,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI1>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -393,6 +388,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI2>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -405,6 +402,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI3>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -417,6 +416,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI4>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -429,6 +430,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI5>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -441,6 +444,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI6>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -452,12 +457,15 @@ snps,txpbl = <4>; snps,rxpbl = <4>; snps,tso; + clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>; + clock-names = "stmmaceth", "phy_ref_clk"; status = "disabled"; }; wdt: wdt@28330000 { compatible = "toshiba,visconti-wdt"; reg = <0 0x28330000 0 0x1000>; + clocks = <&pismu TMPV770X_CLK_WDTCLK>; status = "disabled"; }; @@ -498,6 +506,8 @@ 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; max-link-speed = <2>; + clocks = <&extclk100mhz>, <&pismu TMPV770X_CLK_PCIE_MSTR>, <&pismu TMPV770X_CLK_PCIE_AUX>; + clock-names = "ref", "core", "aux"; status = "disabled"; }; }; diff --git a/dts/src/h8300/edosk2674.dts b/dts/src/h8300/edosk2674.dts deleted file mode 100644 index d1733805ea..0000000000 --- a/dts/src/h8300/edosk2674.dts +++ /dev/null @@ -1,108 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; -/ { - compatible = "renesas,edosk2674"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&h8intc>; - - chosen { - bootargs = "console=ttySC2,38400"; - stdout-path = &sci2; - }; - aliases { - serial0 = &sci0; - serial1 = &sci1; - serial2 = &sci2; - }; - - xclk: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <33333333>; - clock-output-names = "xtal"; - }; - pllclk: pllclk { - compatible = "renesas,h8s2678-pll-clock"; - clocks = <&xclk>; - #clock-cells = <0>; - reg = <0xffff3b 1>, <0xffff45 1>; - }; - core_clk: core_clk { - compatible = "renesas,h8300-div-clock"; - clocks = <&pllclk>; - #clock-cells = <0>; - reg = <0xffff3b 1>; - renesas,width = <3>; - }; - fclk: fclk { - compatible = "fixed-factor-clock"; - clocks = <&core_clk>; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - }; - - memory@400000 { - device_type = "memory"; - reg = <0x400000 0x800000>; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - compatible = "renesas,h8300"; - clock-frequency = <33333333>; - }; - }; - - h8intc: interrupt-controller@fffe00 { - compatible = "renesas,h8s-intc", "renesas,h8300-intc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0xfffe00 24>; - }; - - bsc: memory-controller@fffec0 { - compatible = "renesas,h8s-bsc", "renesas,h8300-bsc"; - reg = <0xfffec0 24>; - }; - - tpu: timer@ffffe0 { - compatible = "renesas,tpu"; - reg = <0xffffe0 16>, <0xfffff0 12>; - clocks = <&fclk>; - clock-names = "fck"; - }; - - timer8: timer@ffffb0 { - compatible = "renesas,8bit-timer"; - reg = <0xffffb0 10>; - interrupts = <72 0>; - clocks = <&fclk>; - clock-names = "fck"; - }; - - sci0: serial@ffff78 { - compatible = "renesas,sci"; - reg = <0xffff78 8>; - interrupts = <88 0>, <89 0>, <90 0>, <91 0>; - clocks = <&fclk>; - clock-names = "fck"; - }; - sci1: serial@ffff80 { - compatible = "renesas,sci"; - reg = <0xffff80 8>; - interrupts = <92 0>, <93 0>, <94 0>, <95 0>; - clocks = <&fclk>; - clock-names = "fck"; - }; - sci2: serial@ffff88 { - compatible = "renesas,sci"; - reg = <0xffff88 8>; - interrupts = <96 0>, <97 0>, <98 0>, <99 0>; - clocks = <&fclk>; - clock-names = "fck"; - }; -}; diff --git a/dts/src/h8300/h8300h_sim.dts b/dts/src/h8300/h8300h_sim.dts deleted file mode 100644 index 595398b9d0..0000000000 --- a/dts/src/h8300/h8300h_sim.dts +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; -/ { - compatible = "gnu,gdbsim"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&h8intc>; - - chosen { - bootargs = "earlyprintk=h8300-sim"; - stdout-path = <&sci0>; - }; - aliases { - serial0 = &sci0; - serial1 = &sci1; - }; - - xclk: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <20000000>; - clock-output-names = "xtal"; - }; - core_clk: core_clk { - compatible = "renesas,h8300-div-clock"; - clocks = <&xclk>; - #clock-cells = <0>; - reg = <0xfee01b 2>; - renesas,width = <2>; - }; - fclk: fclk { - compatible = "fixed-factor-clock"; - clocks = <&core_clk>; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - }; - - memory@400000 { - device_type = "memory"; - reg = <0x400000 0x400000>; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - compatible = "renesas,h8300"; - clock-frequency = <20000000>; - }; - }; - - h8intc: interrupt-controller@fee012 { - compatible = "renesas,h8300h-intc", "renesas,h8300-intc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0xfee012 7>; - }; - - bsc: memory-controller@fee01e { - compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc"; - reg = <0xfee01e 8>; - }; - - timer8: timer@ffff80 { - compatible = "renesas,8bit-timer"; - reg = <0xffff80 10>; - interrupts = <36 0>; - clocks = <&fclk>; - clock-names = "fck"; - }; - - timer16: timer@ffff68 { - compatible = "renesas,16bit-timer"; - reg = <0xffff68 8>, <0xffff60 8>; - interrupts = <26 0>; - renesas,channel = <0>; - clocks = <&fclk>; - clock-names = "fck"; - }; - - sci0: serial@ffffb0 { - compatible = "renesas,sci"; - reg = <0xffffb0 8>; - interrupts = <52 0>, <53 0>, <54 0>, <55 0>; - clocks = <&fclk>; - clock-names = "fck"; - }; - - sci1: serial@ffffb8 { - compatible = "renesas,sci"; - reg = <0xffffb8 8>; - interrupts = <56 0>, <57 0>, <58 0>, <59 0>; - clocks = <&fclk>; - clock-names = "fck"; - }; -}; diff --git a/dts/src/h8300/h8s_sim.dts b/dts/src/h8300/h8s_sim.dts deleted file mode 100644 index 932cc3c5a8..0000000000 --- a/dts/src/h8300/h8s_sim.dts +++ /dev/null @@ -1,100 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; -/ { - compatible = "gnu,gdbsim"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&h8intc>; - - chosen { - bootargs = "earlyprintk=h8300-sim"; - stdout-path = <&sci0>; - }; - aliases { - serial0 = &sci0; - serial1 = &sci1; - }; - - xclk: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <33333333>; - clock-output-names = "xtal"; - }; - pllclk: pllclk { - compatible = "renesas,h8s2678-pll-clock"; - clocks = <&xclk>; - #clock-cells = <0>; - reg = <0xfee03b 2>, <0xfee045 2>; - }; - core_clk: core_clk { - compatible = "renesas,h8300-div-clock"; - clocks = <&pllclk>; - #clock-cells = <0>; - reg = <0xfee03b 2>; - renesas,width = <3>; - }; - fclk: fclk { - compatible = "fixed-factor-clock"; - clocks = <&core_clk>; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - }; - - memory@400000 { - device_type = "memory"; - reg = <0x400000 0x800000>; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - compatible = "renesas,h8300"; - clock-frequency = <33333333>; - }; - }; - - h8intc: interrupt-controller@fffe00 { - compatible = "renesas,h8s-intc", "renesas,h8300-intc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0xfffe00 24>; - }; - - bsc: memory-controller@fffec0 { - compatible = "renesas,h8s-bsc", "renesas,h8300-bsc"; - reg = <0xfffec0 24>; - }; - - tpu: timer@ffffe0 { - compatible = "renesas,tpu"; - reg = <0xffffe0 16>, <0xfffff0 12>; - clocks = <&fclk>; - clock-names = "fck"; - }; - - timer8: timer@ffffb0 { - compatible = "renesas,8bit-timer"; - reg = <0xffffb0 10>; - interrupts = <72 0>; - clocks = <&fclk>; - clock-names = "fck"; - }; - - sci0: serial@ffff78 { - compatible = "renesas,sci"; - reg = <0xffff78 8>; - interrupts = <88 0>, <89 0>, <90 0>, <91 0>; - clocks = <&fclk>; - clock-names = "fck"; - }; - sci1: serial@ffff80 { - compatible = "renesas,sci"; - reg = <0xffff80 8>; - interrupts = <92 0>, <93 0>, <94 0>, <95 0>; - clocks = <&fclk>; - clock-names = "fck"; - }; -}; diff --git a/dts/src/mips/brcm/bcm97358svmb.dts b/dts/src/mips/brcm/bcm97358svmb.dts index 522f2c40d6..c17fc14d48 100644 --- a/dts/src/mips/brcm/bcm97358svmb.dts +++ b/dts/src/mips/brcm/bcm97358svmb.dts @@ -78,7 +78,7 @@ &qspi { status = "okay"; - m25p80@0 { + flash@0 { compatible = "m25p80"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/dts/src/mips/brcm/bcm97360svmb.dts b/dts/src/mips/brcm/bcm97360svmb.dts index 01f215b08d..c9b76f41e7 100644 --- a/dts/src/mips/brcm/bcm97360svmb.dts +++ b/dts/src/mips/brcm/bcm97360svmb.dts @@ -81,7 +81,7 @@ &qspi { status = "okay"; - m25p80@0 { + flash@0 { compatible = "m25p80"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/dts/src/mips/brcm/bcm97425svmb.dts b/dts/src/mips/brcm/bcm97425svmb.dts index f389349343..289a57b912 100644 --- a/dts/src/mips/brcm/bcm97425svmb.dts +++ b/dts/src/mips/brcm/bcm97425svmb.dts @@ -116,7 +116,7 @@ &qspi { status = "okay"; - m25p80@0 { + flash@0 { compatible = "m25p80"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/dts/src/mips/ingenic/cu1000-neo.dts b/dts/src/mips/ingenic/cu1000-neo.dts index f98cf029ef..c89abf94e7 100644 --- a/dts/src/mips/ingenic/cu1000-neo.dts +++ b/dts/src/mips/ingenic/cu1000-neo.dts @@ -31,42 +31,6 @@ }; }; - ssi: spi-gpio { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - num-chipselects = <1>; - - mosi-gpios = <&gpd 2 GPIO_ACTIVE_HIGH>; - miso-gpios = <&gpd 3 GPIO_ACTIVE_HIGH>; - sck-gpios = <&gpd 0 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpd 1 GPIO_ACTIVE_HIGH>; - - status = "okay"; - - spi-max-frequency = <50000000>; - - sc16is752: expander@0 { - compatible = "nxp,sc16is752"; - reg = <0>; /* CE0 */ - spi-max-frequency = <4000000>; - - clocks = <&exclk_sc16is752>; - - interrupt-parent = <&gpc>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; - - gpio-controller; - #gpio-cells = <2>; - - exclk_sc16is752: sc16is752 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - }; - }; - wlan_pwrseq: msc1-pwrseq { compatible = "mmc-pwrseq-simple"; @@ -90,7 +54,7 @@ &ost { /* 1500 kHz for the system timer and clocksource */ - assigned-clocks = <&ost OST_CLK_PERCPU_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; + assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; assigned-clock-rates = <1500000>, <1500000>; }; @@ -101,6 +65,39 @@ pinctrl-0 = <&pins_uart2>; }; +&ssi { + status = "okay"; + + num-cs = <2>; + cs-gpios = <0>, <&gpc 20 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_ssi>; + + sc16is752: expander@0 { + compatible = "nxp,sc16is752"; + reg = <0>; /* CE0 */ + + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + spi-max-frequency = <4000000>; + + clocks = <&exclk_sc16is752>; + + interrupt-parent = <&gpc>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + exclk_sc16is752: sc16is752 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + }; +}; + &i2c0 { status = "okay"; @@ -192,6 +189,12 @@ bias-pull-up; }; + pins_ssi: ssi { + function = "ssi"; + groups = "ssi-dt-d", "ssi-dr-d", "ssi-clk-d", "ssi-ce0-d"; + bias-disable; + }; + pins_i2c0: i2c0 { function = "i2c0"; groups = "i2c0-data"; diff --git a/dts/src/mips/ingenic/cu1830-neo.dts b/dts/src/mips/ingenic/cu1830-neo.dts index cfcb40edb7..3c77849833 100644 --- a/dts/src/mips/ingenic/cu1830-neo.dts +++ b/dts/src/mips/ingenic/cu1830-neo.dts @@ -31,42 +31,6 @@ }; }; - ssi0: spi-gpio { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - num-chipselects = <1>; - - mosi-gpios = <&gpc 12 GPIO_ACTIVE_HIGH>; - miso-gpios = <&gpc 11 GPIO_ACTIVE_HIGH>; - sck-gpios = <&gpc 15 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpc 16 GPIO_ACTIVE_HIGH>; - - status = "okay"; - - spi-max-frequency = <50000000>; - - sc16is752: expander@0 { - compatible = "nxp,sc16is752"; - reg = <0>; /* CE0 */ - spi-max-frequency = <4000000>; - - clocks = <&exclk_sc16is752>; - - interrupt-parent = <&gpb>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>; - - gpio-controller; - #gpio-cells = <2>; - - exclk_sc16is752: sc16is752 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - }; - }; - wlan_pwrseq: msc1-pwrseq { compatible = "mmc-pwrseq-simple"; @@ -90,7 +54,7 @@ &ost { /* 1500 kHz for the system timer and clocksource */ - assigned-clocks = <&ost OST_CLK_PERCPU_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; + assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; assigned-clock-rates = <1500000>, <1500000>; }; @@ -101,6 +65,38 @@ pinctrl-0 = <&pins_uart1>; }; +&ssi0 { + status = "okay"; + + num-cs = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_ssi0>; + + sc16is752: expander@0 { + compatible = "nxp,sc16is752"; + reg = <0>; /* CE0 */ + + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + spi-max-frequency = <4000000>; + + clocks = <&exclk_sc16is752>; + + interrupt-parent = <&gpb>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + exclk_sc16is752: sc16is752 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + }; +}; + &i2c0 { status = "okay"; @@ -196,6 +192,12 @@ bias-pull-up; }; + pins_ssi0: ssi0 { + function = "ssi0"; + groups = "ssi0-dt", "ssi0-dr", "ssi0-clk", "ssi0-ce0", "ssi0-ce1"; + bias-disable; + }; + pins_i2c0: i2c0 { function = "i2c0"; groups = "i2c0-data"; diff --git a/dts/src/mips/ingenic/jz4780.dtsi b/dts/src/mips/ingenic/jz4780.dtsi index b998301f17..c182a656d6 100644 --- a/dts/src/mips/ingenic/jz4780.dtsi +++ b/dts/src/mips/ingenic/jz4780.dtsi @@ -577,7 +577,7 @@ }; otg: usb@13500000 { - compatible = "ingenic,jz4780-otg", "snps,dwc2"; + compatible = "ingenic,jz4780-otg"; reg = <0x13500000 0x40000>; interrupt-parent = <&intc>; diff --git a/dts/src/mips/ingenic/x1000.dtsi b/dts/src/mips/ingenic/x1000.dtsi index 8bd27edef2..b0a034b468 100644 --- a/dts/src/mips/ingenic/x1000.dtsi +++ b/dts/src/mips/ingenic/x1000.dtsi @@ -127,6 +127,18 @@ clocks = <&tcu TCU_CLK_WDT>; clock-names = "wdt"; }; + + pwm: pwm@40 { + compatible = "ingenic,x1000-pwm"; + reg = <0x40 0x50>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>; + clock-names = "timer0", "timer1", "timer2", "timer3", "timer4"; + }; }; rtc: rtc@10003000 { @@ -246,6 +258,25 @@ status = "disabled"; }; + ssi: spi@10043000 { + compatible = "ingenic,x1000-spi"; + reg = <0x10043000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <8>; + + clocks = <&cgu X1000_CLK_SSI>; + clock-names = "spi"; + + dmas = <&pdma X1000_DMA_SSI0_RX 0xffffffff>, + <&pdma X1000_DMA_SSI0_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + i2c0: i2c-controller@10050000 { compatible = "ingenic,x1000-i2c"; reg = <0x10050000 0x1000>; @@ -291,6 +322,7 @@ pdma: dma-controller@13420000 { compatible = "ingenic,x1000-dma"; reg = <0x13420000 0x400>, <0x13421000 0x40>; + #dma-cells = <2>; interrupt-parent = <&intc>; @@ -366,7 +398,7 @@ }; otg: usb@13500000 { - compatible = "ingenic,x1000-otg", "snps,dwc2"; + compatible = "ingenic,x1000-otg"; reg = <0x13500000 0x40000>; interrupt-parent = <&intc>; diff --git a/dts/src/mips/ingenic/x1830.dtsi b/dts/src/mips/ingenic/x1830.dtsi index 2595df8671..dbf21afacc 100644 --- a/dts/src/mips/ingenic/x1830.dtsi +++ b/dts/src/mips/ingenic/x1830.dtsi @@ -120,6 +120,20 @@ clocks = <&tcu TCU_CLK_WDT>; clock-names = "wdt"; }; + + pwm: pwm@40 { + compatible = "ingenic,x1830-pwm", "ingenic,jz4740-pwm"; + reg = <0x40 0x80>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>, + <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>; + clock-names = "timer0", "timer1", "timer2", "timer3", + "timer4", "timer5", "timer6", "timer7"; + }; }; rtc: rtc@10003000 { @@ -226,6 +240,44 @@ status = "disabled"; }; + ssi0: spi@10043000 { + compatible = "ingenic,x1830-spi", "ingenic,x1000-spi"; + reg = <0x10043000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <9>; + + clocks = <&cgu X1830_CLK_SSI0>; + clock-names = "spi"; + + dmas = <&pdma X1830_DMA_SSI0_RX 0xffffffff>, + <&pdma X1830_DMA_SSI0_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + + ssi1: spi@10044000 { + compatible = "ingenic,x1830-spi", "ingenic,x1000-spi"; + reg = <0x10044000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <8>; + + clocks = <&cgu X1830_CLK_SSI1>; + clock-names = "spi"; + + dmas = <&pdma X1830_DMA_SSI1_RX 0xffffffff>, + <&pdma X1830_DMA_SSI1_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + i2c0: i2c-controller@10050000 { compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; reg = <0x10050000 0x1000>; @@ -280,6 +332,7 @@ pdma: dma-controller@13420000 { compatible = "ingenic,x1830-dma"; reg = <0x13420000 0x400>, <0x13421000 0x40>; + #dma-cells = <2>; interrupt-parent = <&intc>; @@ -355,7 +408,7 @@ }; otg: usb@13500000 { - compatible = "ingenic,x1830-otg", "snps,dwc2"; + compatible = "ingenic,x1830-otg"; reg = <0x13500000 0x40000>; interrupt-parent = <&intc>; diff --git a/dts/src/mips/mscc/jaguar2_pcb110.dts b/dts/src/mips/mscc/jaguar2_pcb110.dts index d80cd6842b..0ea7bc5b57 100644 --- a/dts/src/mips/mscc/jaguar2_pcb110.dts +++ b/dts/src/mips/mscc/jaguar2_pcb110.dts @@ -180,27 +180,27 @@ pins = "GPIO_49"; function = "si"; }; - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_17", "GPIO_18", "GPIO_20", "GPIO_21"; function = "twi_scl_m"; output-low; }; - i2cmux_0: i2cmux-0 { + i2cmux_0: i2cmux-0-pins { pins = "GPIO_17"; function = "twi_scl_m"; output-high; }; - i2cmux_1: i2cmux-1 { + i2cmux_1: i2cmux-1-pins { pins = "GPIO_18"; function = "twi_scl_m"; output-high; }; - i2cmux_2: i2cmux-2 { + i2cmux_2: i2cmux-2-pins { pins = "GPIO_20"; function = "twi_scl_m"; output-high; }; - i2cmux_3: i2cmux-3 { + i2cmux_3: i2cmux-3-pins { pins = "GPIO_21"; function = "twi_scl_m"; output-high; diff --git a/dts/src/mips/mscc/jaguar2_pcb111.dts b/dts/src/mips/mscc/jaguar2_pcb111.dts index 813c5e1601..05d8c6a96d 100644 --- a/dts/src/mips/mscc/jaguar2_pcb111.dts +++ b/dts/src/mips/mscc/jaguar2_pcb111.dts @@ -79,27 +79,27 @@ }; &gpio { - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_17", "GPIO_18"; function = "twi_scl_m"; output-low; }; - i2cmux_0: i2cmux-0 { + i2cmux_0: i2cmux-0-pins { pins = "GPIO_17"; function = "twi_scl_m"; output-high; }; - i2cmux_1: i2cmux-1 { + i2cmux_1: i2cmux-1-pins { pins = "GPIO_18"; function = "twi_scl_m"; output-high; }; - i2cmux_2: i2cmux-2 { + i2cmux_2: i2cmux-2-pins { pins = "GPIO_20"; function = "twi_scl_m"; output-high; }; - i2cmux_3: i2cmux-3 { + i2cmux_3: i2cmux-3-pins { pins = "GPIO_21"; function = "twi_scl_m"; output-high; diff --git a/dts/src/mips/mscc/jaguar2_pcb118.dts b/dts/src/mips/mscc/jaguar2_pcb118.dts index 27c644f2d1..cf2cf591a2 100644 --- a/dts/src/mips/mscc/jaguar2_pcb118.dts +++ b/dts/src/mips/mscc/jaguar2_pcb118.dts @@ -39,17 +39,17 @@ }; &gpio { - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_17", "GPIO_16"; function = "twi_scl_m"; output-low; }; - i2cmux_0: i2cmux-0 { + i2cmux_0: i2cmux-0-pins { pins = "GPIO_17"; function = "twi_scl_m"; output-high; }; - i2cmux_1: i2cmux-1 { + i2cmux_1: i2cmux-1-pins { pins = "GPIO_16"; function = "twi_scl_m"; output-high; diff --git a/dts/src/mips/mscc/ocelot.dtsi b/dts/src/mips/mscc/ocelot.dtsi index e51db651af..cfc219a72b 100644 --- a/dts/src/mips/mscc/ocelot.dtsi +++ b/dts/src/mips/mscc/ocelot.dtsi @@ -225,7 +225,7 @@ function = "uart2"; }; - miim1: miim1 { + miim1_pins: miim1-pins { pins = "GPIO_14", "GPIO_15"; function = "miim"; }; @@ -261,7 +261,7 @@ reg = <0x10700c0 0x24>; interrupts = <15>; pinctrl-names = "default"; - pinctrl-0 = <&miim1>; + pinctrl-0 = <&miim1_pins>; status = "disabled"; }; diff --git a/dts/src/mips/mscc/ocelot_pcb120.dts b/dts/src/mips/mscc/ocelot_pcb120.dts index bd240690cb..d348742c23 100644 --- a/dts/src/mips/mscc/ocelot_pcb120.dts +++ b/dts/src/mips/mscc/ocelot_pcb120.dts @@ -22,12 +22,12 @@ }; &gpio { - phy_int_pins: phy_int_pins { + phy_int_pins: phy-int-pins { pins = "GPIO_4"; function = "gpio"; }; - phy_load_save_pins: phy_load_save_pins { + phy_load_save_pins: phy-load-save-pins { pins = "GPIO_10"; function = "ptp2"; }; @@ -40,7 +40,7 @@ &mdio1 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&miim1>, <&phy_int_pins>, <&phy_load_save_pins>; + pinctrl-0 = <&miim1_pins>, <&phy_int_pins>, <&phy_load_save_pins>; phy7: ethernet-phy@0 { reg = <0>; diff --git a/dts/src/mips/mscc/serval_common.dtsi b/dts/src/mips/mscc/serval_common.dtsi index 5b404836db..0893de420e 100644 --- a/dts/src/mips/mscc/serval_common.dtsi +++ b/dts/src/mips/mscc/serval_common.dtsi @@ -82,38 +82,38 @@ pins = "GPIO_7"; /* No "default" scl for i2c0 */ function = "twi"; }; - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_11", "GPIO_12", "GPIO_18", "GPIO_19", "GPIO_20", "GPIO_21"; function = "twi_scl_m"; output-low; }; - i2cmux_0: i2cmux-0 { + i2cmux_0: i2cmux-0-pins { pins = "GPIO_11"; function = "twi_scl_m"; output-high; }; - i2cmux_1: i2cmux-1 { + i2cmux_1: i2cmux-1-pins { pins = "GPIO_12"; function = "twi_scl_m"; output-high; }; - i2cmux_2: i2cmux-2 { + i2cmux_2: i2cmux-2-pins { pins = "GPIO_18"; function = "twi_scl_m"; output-high; }; - i2cmux_3: i2cmux-3 { + i2cmux_3: i2cmux-3-pins { pins = "GPIO_19"; function = "twi_scl_m"; output-high; }; - i2cmux_4: i2cmux-4 { + i2cmux_4: i2cmux-4-pins { pins = "GPIO_20"; function = "twi_scl_m"; output-high; }; - i2cmux_5: i2cmux-5 { + i2cmux_5: i2cmux-5-pins { pins = "GPIO_21"; function = "twi_scl_m"; output-high; diff --git a/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts b/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts index 6069b33cf0..826e91b840 100644 --- a/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts +++ b/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts @@ -129,7 +129,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinmux_spi_spi>, <&pinmux_spi_cs1_cs>; - m25p80@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts b/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts index 5892bcf715..37037e4f3c 100644 --- a/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts +++ b/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts @@ -60,7 +60,7 @@ &spi0 { status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; @@ -97,20 +97,15 @@ status = "okay"; }; -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: state-default { - gpio-pinmux { - groups = "rgmii2", "uart3", "wdt"; - function = "gpio"; - }; - }; +&gmac1 { + status = "okay"; + phy-handle = <ðphy4>; }; -ðernet { - pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; +&mdio { + ethphy4: ethernet-phy@4 { + reg = <4>; + }; }; &switch0 { @@ -119,10 +114,5 @@ status = "okay"; label = "ethblack"; }; - - port@4 { - status = "okay"; - label = "ethblue"; - }; }; }; diff --git a/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts b/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts index a7fce8de61..a6201a119a 100644 --- a/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts +++ b/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts @@ -44,7 +44,7 @@ &spi0 { status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; @@ -81,29 +81,15 @@ status = "okay"; }; -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: state-default { - gpio-pinmux { - groups = "wdt"; - function = "gpio"; - }; - }; +&gmac1 { + status = "okay"; + phy-handle = <ðphy7>; }; -ðernet { - gmac1: mac@1 { - status = "okay"; - phy-handle = <ðphy7>; - }; - - mdio-bus { - ethphy7: ethernet-phy@7 { - reg = <7>; - phy-mode = "rgmii-rxid"; - }; +&mdio { + ethphy7: ethernet-phy@7 { + reg = <7>; + phy-mode = "rgmii-rxid"; }; }; diff --git a/dts/src/mips/ralink/mt7621.dtsi b/dts/src/mips/ralink/mt7621.dtsi index 3222684915..ee46ace0bc 100644 --- a/dts/src/mips/ralink/mt7621.dtsi +++ b/dts/src/mips/ralink/mt7621.dtsi @@ -151,7 +151,7 @@ }; pinctrl: pinctrl { - compatible = "ralink,rt2880-pinmux"; + compatible = "ralink,mt7621-pinctrl"; i2c_pins: i2c0-pins { pinmux { @@ -342,7 +342,7 @@ phy-mode = "rgmii-rxid"; }; - mdio-bus { + mdio: mdio-bus { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/powerpc/fsl/p2020si-post.dtsi b/dts/src/powerpc/fsl/p2020si-post.dtsi index 884e01bcb2..7a590c92fe 100644 --- a/dts/src/powerpc/fsl/p2020si-post.dtsi +++ b/dts/src/powerpc/fsl/p2020si-post.dtsi @@ -198,4 +198,9 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + + pmc: power@e0070 { + compatible = "fsl,mpc8548-pmc"; + reg = <0xe0070 0x20>; + }; }; diff --git a/dts/src/powerpc/microwatt.dts b/dts/src/powerpc/microwatt.dts index 65b270a90f..b69db1d275 100644 --- a/dts/src/powerpc/microwatt.dts +++ b/dts/src/powerpc/microwatt.dts @@ -90,6 +90,8 @@ 64-bit; d-cache-size = <0x1000>; ibm,chip-id = <0>; + ibm,mmu-lpid-bits = <12>; + ibm,mmu-pid-bits = <20>; }; }; diff --git a/dts/src/riscv/microchip/microchip-mpfs-fabric.dtsi b/dts/src/riscv/microchip/microchip-mpfs-fabric.dtsi deleted file mode 100644 index ccaac3371c..0000000000 --- a/dts/src/riscv/microchip/microchip-mpfs-fabric.dtsi +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020-2021 Microchip Technology Inc */ - -/ { - core_pwm0: pwm@41000000 { - compatible = "microchip,corepwm-rtl-v4"; - reg = <0x0 0x41000000 0x0 0xF0>; - microchip,sync-update-mask = /bits/ 32 <0>; - #pwm-cells = <2>; - clocks = <&fabric_clk3>; - status = "disabled"; - }; - - i2c2: i2c@44000000 { - compatible = "microchip,corei2c-rtl-v7"; - reg = <0x0 0x44000000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&fabric_clk3>; - interrupt-parent = <&plic>; - interrupts = <122>; - clock-frequency = <100000>; - status = "disabled"; - }; - - fabric_clk3: fabric-clk3 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <62500000>; - }; - - fabric_clk1: fabric-clk1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; -}; diff --git a/dts/src/riscv/microchip/microchip-mpfs-icicle-kit.dts b/dts/src/riscv/microchip/microchip-mpfs-icicle-kit.dts deleted file mode 100644 index 3392153dd0..0000000000 --- a/dts/src/riscv/microchip/microchip-mpfs-icicle-kit.dts +++ /dev/null @@ -1,161 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020-2021 Microchip Technology Inc */ - -/dts-v1/; - -#include "microchip-mpfs.dtsi" - -/* Clock frequency (in Hz) of the rtcclk */ -#define RTCCLK_FREQ 1000000 - -/ { - model = "Microchip PolarFire-SoC Icicle Kit"; - compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs"; - - aliases { - ethernet0 = &mac1; - serial0 = &mmuart0; - serial1 = &mmuart1; - serial2 = &mmuart2; - serial3 = &mmuart3; - serial4 = &mmuart4; - }; - - chosen { - stdout-path = "serial1:115200n8"; - }; - - cpus { - timebase-frequency = ; - }; - - ddrc_cache_lo: memory@80000000 { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x2e000000>; - clocks = <&clkcfg CLK_DDRC>; - status = "okay"; - }; - - ddrc_cache_hi: memory@1000000000 { - device_type = "memory"; - reg = <0x10 0x0 0x0 0x40000000>; - clocks = <&clkcfg CLK_DDRC>; - status = "okay"; - }; -}; - -&refclk { - clock-frequency = <125000000>; -}; - -&mmuart1 { - status = "okay"; -}; - -&mmuart2 { - status = "okay"; -}; - -&mmuart3 { - status = "okay"; -}; - -&mmuart4 { - status = "okay"; -}; - -&mmc { - status = "okay"; - - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - cap-mmc-highspeed; - card-detect-delay = <200>; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; -}; - -&spi0 { - status = "okay"; -}; - -&spi1 { - status = "okay"; -}; - -&qspi { - status = "okay"; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&mac0 { - phy-mode = "sgmii"; - phy-handle = <&phy0>; -}; - -&mac1 { - status = "okay"; - phy-mode = "sgmii"; - phy-handle = <&phy1>; - phy1: ethernet-phy@9 { - reg = <9>; - ti,fifo-depth = <0x1>; - }; - phy0: ethernet-phy@8 { - reg = <8>; - ti,fifo-depth = <0x1>; - }; -}; - -&gpio2 { - interrupts = <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>; - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; - -&mbox { - status = "okay"; -}; - -&syscontroller { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; - -&core_pwm0 { - status = "okay"; -}; diff --git a/dts/src/riscv/microchip/microchip-mpfs.dtsi b/dts/src/riscv/microchip/microchip-mpfs.dtsi deleted file mode 100644 index cf2f55e1dc..0000000000 --- a/dts/src/riscv/microchip/microchip-mpfs.dtsi +++ /dev/null @@ -1,455 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020-2021 Microchip Technology Inc */ - -/dts-v1/; -#include "dt-bindings/clock/microchip,mpfs-clock.h" -#include "microchip-mpfs-fabric.dtsi" - -/ { - #address-cells = <2>; - #size-cells = <2>; - model = "Microchip PolarFire SoC"; - compatible = "microchip,mpfs"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "sifive,e51", "sifive,rocket0", "riscv"; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <128>; - i-cache-size = <16384>; - reg = <0>; - riscv,isa = "rv64imac"; - clocks = <&clkcfg CLK_CPU>; - status = "disabled"; - - cpu0_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - - cpu1: cpu@1 { - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <1>; - riscv,isa = "rv64imafdc"; - clocks = <&clkcfg CLK_CPU>; - tlb-split; - status = "okay"; - - cpu1_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - - cpu2: cpu@2 { - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <2>; - riscv,isa = "rv64imafdc"; - clocks = <&clkcfg CLK_CPU>; - tlb-split; - status = "okay"; - - cpu2_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - - cpu3: cpu@3 { - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <3>; - riscv,isa = "rv64imafdc"; - clocks = <&clkcfg CLK_CPU>; - tlb-split; - status = "okay"; - - cpu3_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - - cpu4: cpu@4 { - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <4>; - riscv,isa = "rv64imafdc"; - clocks = <&clkcfg CLK_CPU>; - tlb-split; - status = "okay"; - cpu4_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - }; - - refclk: mssrefclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - }; - - soc { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - ranges; - - cctrllr: cache-controller@2010000 { - compatible = "sifive,fu540-c000-ccache", "cache"; - reg = <0x0 0x2010000 0x0 0x1000>; - cache-block-size = <64>; - cache-level = <2>; - cache-sets = <1024>; - cache-size = <2097152>; - cache-unified; - interrupt-parent = <&plic>; - interrupts = <1>, <2>, <3>; - }; - - clint: clint@2000000 { - compatible = "sifive,fu540-c000-clint", "sifive,clint0"; - reg = <0x0 0x2000000 0x0 0xC000>; - interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, - <&cpu1_intc 3>, <&cpu1_intc 7>, - <&cpu2_intc 3>, <&cpu2_intc 7>, - <&cpu3_intc 3>, <&cpu3_intc 7>, - <&cpu4_intc 3>, <&cpu4_intc 7>; - }; - - plic: interrupt-controller@c000000 { - compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; - reg = <0x0 0xc000000 0x0 0x4000000>; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - interrupts-extended = <&cpu0_intc 11>, - <&cpu1_intc 11>, <&cpu1_intc 9>, - <&cpu2_intc 11>, <&cpu2_intc 9>, - <&cpu3_intc 11>, <&cpu3_intc 9>, - <&cpu4_intc 11>, <&cpu4_intc 9>; - riscv,ndev = <186>; - }; - - clkcfg: clkcfg@20002000 { - compatible = "microchip,mpfs-clkcfg"; - reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; - clocks = <&refclk>; - #clock-cells = <1>; - }; - - mmuart0: serial@20000000 { - compatible = "ns16550a"; - reg = <0x0 0x20000000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <90>; - current-speed = <115200>; - clocks = <&clkcfg CLK_MMUART0>; - status = "disabled"; /* Reserved for the HSS */ - }; - - mmuart1: serial@20100000 { - compatible = "ns16550a"; - reg = <0x0 0x20100000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <91>; - current-speed = <115200>; - clocks = <&clkcfg CLK_MMUART1>; - status = "disabled"; - }; - - mmuart2: serial@20102000 { - compatible = "ns16550a"; - reg = <0x0 0x20102000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <92>; - current-speed = <115200>; - clocks = <&clkcfg CLK_MMUART2>; - status = "disabled"; - }; - - mmuart3: serial@20104000 { - compatible = "ns16550a"; - reg = <0x0 0x20104000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <93>; - current-speed = <115200>; - clocks = <&clkcfg CLK_MMUART3>; - status = "disabled"; - }; - - mmuart4: serial@20106000 { - compatible = "ns16550a"; - reg = <0x0 0x20106000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <94>; - clocks = <&clkcfg CLK_MMUART4>; - current-speed = <115200>; - status = "disabled"; - }; - - /* Common node entry for emmc/sd */ - mmc: mmc@20008000 { - compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc"; - reg = <0x0 0x20008000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <88>; - clocks = <&clkcfg CLK_MMC>; - max-frequency = <200000000>; - status = "disabled"; - }; - - spi0: spi@20108000 { - compatible = "microchip,mpfs-spi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x20108000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <54>; - clocks = <&clkcfg CLK_SPI0>; - spi-max-frequency = <25000000>; - status = "disabled"; - }; - - spi1: spi@20109000 { - compatible = "microchip,mpfs-spi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x20109000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <55>; - clocks = <&clkcfg CLK_SPI1>; - spi-max-frequency = <25000000>; - status = "disabled"; - }; - - qspi: spi@21000000 { - compatible = "microchip,mpfs-qspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x21000000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <85>; - clocks = <&clkcfg CLK_QSPI>; - spi-max-frequency = <25000000>; - status = "disabled"; - }; - - i2c0: i2c@2010a000 { - compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; - reg = <0x0 0x2010a000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&plic>; - interrupts = <58>; - clocks = <&clkcfg CLK_I2C0>; - clock-frequency = <100000>; - status = "disabled"; - }; - - i2c1: i2c@2010b000 { - compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; - reg = <0x0 0x2010b000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&plic>; - interrupts = <61>; - clocks = <&clkcfg CLK_I2C1>; - clock-frequency = <100000>; - status = "disabled"; - }; - - mac0: ethernet@20110000 { - compatible = "cdns,macb"; - reg = <0x0 0x20110000 0x0 0x2000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&plic>; - interrupts = <64>, <65>, <66>, <67>, <68>, <69>; - local-mac-address = [00 00 00 00 00 00]; - clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; - clock-names = "pclk", "hclk"; - status = "disabled"; - }; - - mac1: ethernet@20112000 { - compatible = "cdns,macb"; - reg = <0x0 0x20112000 0x0 0x2000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&plic>; - interrupts = <70>, <71>, <72>, <73>, <74>, <75>; - local-mac-address = [00 00 00 00 00 00]; - clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; - clock-names = "pclk", "hclk"; - status = "disabled"; - }; - - gpio0: gpio@20120000 { - compatible = "microchip,mpfs-gpio"; - reg = <0x0 0x20120000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupt-controller; - #interrupt-cells = <1>; - clocks = <&clkcfg CLK_GPIO0>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; - }; - - gpio1: gpio@20121000 { - compatible = "microchip,mpfs-gpio"; - reg = <0x0 0x20121000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupt-controller; - #interrupt-cells = <1>; - clocks = <&clkcfg CLK_GPIO1>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; - }; - - gpio2: gpio@20122000 { - compatible = "microchip,mpfs-gpio"; - reg = <0x0 0x20122000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupt-controller; - #interrupt-cells = <1>; - clocks = <&clkcfg CLK_GPIO2>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; - }; - - rtc: rtc@20124000 { - compatible = "microchip,mpfs-rtc"; - reg = <0x0 0x20124000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <80>, <81>; - clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>; - clock-names = "rtc", "rtcref"; - status = "disabled"; - }; - - usb: usb@20201000 { - compatible = "microchip,mpfs-musb"; - reg = <0x0 0x20201000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <86>, <87>; - clocks = <&clkcfg CLK_USB>; - interrupt-names = "dma","mc"; - status = "disabled"; - }; - - pcie: pcie@2000000000 { - compatible = "microchip,pcie-host-1.0"; - #address-cells = <0x3>; - #interrupt-cells = <0x1>; - #size-cells = <0x2>; - device_type = "pci"; - reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; - reg-names = "cfg", "apb"; - bus-range = <0x0 0x7f>; - interrupt-parent = <&plic>; - interrupts = <119>; - interrupt-map = <0 0 0 1 &pcie_intc 0>, - <0 0 0 2 &pcie_intc 1>, - <0 0 0 3 &pcie_intc 2>, - <0 0 0 4 &pcie_intc 3>; - interrupt-map-mask = <0 0 0 7>; - clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; - clock-names = "fic0", "fic1", "fic3"; - ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; - msi-parent = <&pcie>; - msi-controller; - microchip,axi-m-atr0 = <0x10 0x0>; - status = "disabled"; - pcie_intc: legacy-interrupt-controller { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - }; - - mbox: mailbox@37020000 { - compatible = "microchip,mpfs-mailbox"; - reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>; - interrupt-parent = <&plic>; - interrupts = <96>; - #mbox-cells = <1>; - status = "disabled"; - }; - - syscontroller: syscontroller { - compatible = "microchip,mpfs-sys-controller"; - mboxes = <&mbox 0>; - }; - }; -}; diff --git a/dts/src/riscv/microchip/mpfs-icicle-kit-fabric.dtsi b/dts/src/riscv/microchip/mpfs-icicle-kit-fabric.dtsi new file mode 100644 index 0000000000..0d28858b83 --- /dev/null +++ b/dts/src/riscv/microchip/mpfs-icicle-kit-fabric.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/ { + compatible = "microchip,mpfs-icicle-reference-rtlv2203", "microchip,mpfs"; + + core_pwm0: pwm@41000000 { + compatible = "microchip,corepwm-rtl-v4"; + reg = <0x0 0x41000000 0x0 0xF0>; + microchip,sync-update-mask = /bits/ 32 <0>; + #pwm-cells = <2>; + clocks = <&fabric_clk3>; + status = "disabled"; + }; + + i2c2: i2c@44000000 { + compatible = "microchip,corei2c-rtl-v7"; + reg = <0x0 0x44000000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&fabric_clk3>; + interrupt-parent = <&plic>; + interrupts = <122>; + clock-frequency = <100000>; + status = "disabled"; + }; + + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <62500000>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; +}; diff --git a/dts/src/riscv/microchip/mpfs-icicle-kit.dts b/dts/src/riscv/microchip/mpfs-icicle-kit.dts new file mode 100644 index 0000000000..044982a11d --- /dev/null +++ b/dts/src/riscv/microchip/mpfs-icicle-kit.dts @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-icicle-kit-fabric.dtsi" + +/* Clock frequency (in Hz) of the rtcclk */ +#define RTCCLK_FREQ 1000000 + +/ { + model = "Microchip PolarFire-SoC Icicle Kit"; + compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs"; + + aliases { + ethernet0 = &mac1; + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + cpus { + timebase-frequency = ; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x2e000000>; + status = "okay"; + }; + + ddrc_cache_hi: memory@1000000000 { + device_type = "memory"; + reg = <0x10 0x0 0x0 0x40000000>; + status = "okay"; + }; +}; + +&core_pwm0 { + status = "okay"; +}; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; + status = "okay"; +}; + +&mac1 { + phy-mode = "sgmii"; + phy-handle = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@9 { + reg = <9>; + ti,fifo-depth = <0x1>; + }; + + phy0: ethernet-phy@8 { + reg = <8>; + ti,fifo-depth = <0x1>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + card-detect-delay = <200>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&mmuart1 { + status = "okay"; +}; + +&mmuart2 { + status = "okay"; +}; + +&mmuart3 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&qspi { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; diff --git a/dts/src/riscv/microchip/mpfs-polarberry-fabric.dtsi b/dts/src/riscv/microchip/mpfs-polarberry-fabric.dtsi new file mode 100644 index 0000000000..49380c428e --- /dev/null +++ b/dts/src/riscv/microchip/mpfs-polarberry-fabric.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2022 Microchip Technology Inc */ + +/ { + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <62500000>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; +}; diff --git a/dts/src/riscv/microchip/mpfs-polarberry.dts b/dts/src/riscv/microchip/mpfs-polarberry.dts new file mode 100644 index 0000000000..82c93c8f5c --- /dev/null +++ b/dts/src/riscv/microchip/mpfs-polarberry.dts @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2022 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-polarberry-fabric.dtsi" + +/* Clock frequency (in Hz) of the rtcclk */ +#define MTIMER_FREQ 1000000 + +/ { + model = "Sundance PolarBerry"; + compatible = "sundance,polarberry", "microchip,mpfs"; + + aliases { + ethernet0 = &mac1; + serial0 = &mmuart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + timebase-frequency = ; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x2e000000>; + }; + + ddrc_cache_hi: memory@1000000000 { + device_type = "memory"; + reg = <0x10 0x00000000 0x0 0xC0000000>; + }; +}; + +/* + * phy0 is connected to mac0, but the port itself is on the (optional) carrier + * board. + */ +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; + status = "disabled"; +}; + +&mac1 { + phy-mode = "sgmii"; + phy-handle = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@5 { + reg = <5>; + ti,fifo-depth = <0x01>; + }; + + phy0: ethernet-phy@4 { + reg = <4>; + ti,fifo-depth = <0x01>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + card-detect-delay = <200>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&mmuart0 { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&rtc { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; diff --git a/dts/src/riscv/microchip/mpfs.dtsi b/dts/src/riscv/microchip/mpfs.dtsi new file mode 100644 index 0000000000..8c32591341 --- /dev/null +++ b/dts/src/riscv/microchip/mpfs.dtsi @@ -0,0 +1,454 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/dts-v1/; +#include "dt-bindings/clock/microchip,mpfs-clock.h" + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Microchip PolarFire SoC"; + compatible = "microchip,mpfs"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "sifive,e51", "sifive,rocket0", "riscv"; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <16384>; + reg = <0>; + riscv,isa = "rv64imac"; + clocks = <&clkcfg CLK_CPU>; + status = "disabled"; + + cpu0_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu1: cpu@1 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <1>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + status = "okay"; + + cpu1_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu2: cpu@2 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <2>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + status = "okay"; + + cpu2_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu3: cpu@3 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <3>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + status = "okay"; + + cpu3_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu4: cpu@4 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <4>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + status = "okay"; + cpu4_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + }; + + refclk: mssrefclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + syscontroller: syscontroller { + compatible = "microchip,mpfs-sys-controller"; + mboxes = <&mbox 0>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + cctrllr: cache-controller@2010000 { + compatible = "sifive,fu540-c000-ccache", "cache"; + reg = <0x0 0x2010000 0x0 0x1000>; + cache-block-size = <64>; + cache-level = <2>; + cache-sets = <1024>; + cache-size = <2097152>; + cache-unified; + interrupt-parent = <&plic>; + interrupts = <1>, <2>, <3>; + }; + + clint: clint@2000000 { + compatible = "sifive,fu540-c000-clint", "sifive,clint0"; + reg = <0x0 0x2000000 0x0 0xC000>; + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, + <&cpu1_intc 3>, <&cpu1_intc 7>, + <&cpu2_intc 3>, <&cpu2_intc 7>, + <&cpu3_intc 3>, <&cpu3_intc 7>, + <&cpu4_intc 3>, <&cpu4_intc 7>; + }; + + plic: interrupt-controller@c000000 { + compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; + reg = <0x0 0xc000000 0x0 0x4000000>; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts-extended = <&cpu0_intc 11>, + <&cpu1_intc 11>, <&cpu1_intc 9>, + <&cpu2_intc 11>, <&cpu2_intc 9>, + <&cpu3_intc 11>, <&cpu3_intc 9>, + <&cpu4_intc 11>, <&cpu4_intc 9>; + riscv,ndev = <186>; + }; + + clkcfg: clkcfg@20002000 { + compatible = "microchip,mpfs-clkcfg"; + reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; + clocks = <&refclk>; + #clock-cells = <1>; + }; + + mmuart0: serial@20000000 { + compatible = "ns16550a"; + reg = <0x0 0x20000000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <90>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART0>; + status = "disabled"; /* Reserved for the HSS */ + }; + + mmuart1: serial@20100000 { + compatible = "ns16550a"; + reg = <0x0 0x20100000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <91>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART1>; + status = "disabled"; + }; + + mmuart2: serial@20102000 { + compatible = "ns16550a"; + reg = <0x0 0x20102000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <92>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART2>; + status = "disabled"; + }; + + mmuart3: serial@20104000 { + compatible = "ns16550a"; + reg = <0x0 0x20104000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <93>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART3>; + status = "disabled"; + }; + + mmuart4: serial@20106000 { + compatible = "ns16550a"; + reg = <0x0 0x20106000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <94>; + clocks = <&clkcfg CLK_MMUART4>; + current-speed = <115200>; + status = "disabled"; + }; + + /* Common node entry for emmc/sd */ + mmc: mmc@20008000 { + compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc"; + reg = <0x0 0x20008000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <88>; + clocks = <&clkcfg CLK_MMC>; + max-frequency = <200000000>; + status = "disabled"; + }; + + spi0: spi@20108000 { + compatible = "microchip,mpfs-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20108000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <54>; + clocks = <&clkcfg CLK_SPI0>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + spi1: spi@20109000 { + compatible = "microchip,mpfs-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20109000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <55>; + clocks = <&clkcfg CLK_SPI1>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + qspi: spi@21000000 { + compatible = "microchip,mpfs-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21000000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <85>; + clocks = <&clkcfg CLK_QSPI>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + i2c0: i2c@2010a000 { + compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; + reg = <0x0 0x2010a000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <58>; + clocks = <&clkcfg CLK_I2C0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@2010b000 { + compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; + reg = <0x0 0x2010b000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <61>; + clocks = <&clkcfg CLK_I2C1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + mac0: ethernet@20110000 { + compatible = "cdns,macb"; + reg = <0x0 0x20110000 0x0 0x2000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <64>, <65>, <66>, <67>, <68>, <69>; + local-mac-address = [00 00 00 00 00 00]; + clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + status = "disabled"; + }; + + mac1: ethernet@20112000 { + compatible = "cdns,macb"; + reg = <0x0 0x20112000 0x0 0x2000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <70>, <71>, <72>, <73>, <74>, <75>; + local-mac-address = [00 00 00 00 00 00]; + clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + status = "disabled"; + }; + + gpio0: gpio@20120000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20120000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + gpio1: gpio@20121000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20121000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + gpio2: gpio@20122000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20122000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + rtc: rtc@20124000 { + compatible = "microchip,mpfs-rtc"; + reg = <0x0 0x20124000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <80>, <81>; + clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>; + clock-names = "rtc", "rtcref"; + status = "disabled"; + }; + + usb: usb@20201000 { + compatible = "microchip,mpfs-musb"; + reg = <0x0 0x20201000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <86>, <87>; + clocks = <&clkcfg CLK_USB>; + interrupt-names = "dma","mc"; + status = "disabled"; + }; + + pcie: pcie@2000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; + clock-names = "fic0", "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + msi-parent = <&pcie>; + msi-controller; + microchip,axi-m-atr0 = <0x10 0x0>; + status = "disabled"; + pcie_intc: legacy-interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + mbox: mailbox@37020000 { + compatible = "microchip,mpfs-mailbox"; + reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>; + interrupt-parent = <&plic>; + interrupts = <96>; + #mbox-cells = <1>; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/riscv/sifive/fu540-c000.dtsi b/dts/src/riscv/sifive/fu540-c000.dtsi index 5c638fd5b3..e3172d0ffa 100644 --- a/dts/src/riscv/sifive/fu540-c000.dtsi +++ b/dts/src/riscv/sifive/fu540-c000.dtsi @@ -168,11 +168,12 @@ status = "disabled"; }; dma: dma-controller@3000000 { - compatible = "sifive,fu540-c000-pdma"; + compatible = "sifive,fu540-c000-pdma", "sifive,pdma0"; reg = <0x0 0x3000000 0x0 0x8000>; interrupt-parent = <&plic0>; interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, <30>; + dma-channels = <4>; #dma-cells = <1>; }; uart1: serial@10011000 { -- cgit v1.2.3