From d7c9e13a6f03f9ebc9511ad8d6ecee7ab90f5740 Mon Sep 17 00:00:00 2001 From: Ahmad Fatoum Date: Thu, 9 Jun 2022 07:59:21 +0200 Subject: doc: bcm283x: reference newer firmware The old firmware can boot a Raspberry Pi 4 apparently, but it doesn't contain bcm2711 device trees, so it's probably not an actually supported configuration. Point at a newer firmware instead. Signed-off-by: Ahmad Fatoum Link: https://lore.barebox.org/20220609055922.667016-21-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer --- Documentation/boards/bcm2835.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/boards/bcm2835.rst b/Documentation/boards/bcm2835.rst index 2fa5d445d2..f6df3e9e80 100644 --- a/Documentation/boards/bcm2835.rst +++ b/Documentation/boards/bcm2835.rst @@ -11,7 +11,7 @@ used in the Raspberry Pi 4, only basic support is currently available 1. Prepare an SD or microSD card with a FAT filesystem of at least 30 MB in size. - 2. Download the `Raspberry Pi firmware`_ (120 MB), unzip it, and copy the + 2. Download the `Raspberry Pi firmware`_ (195 MB), unzip it, and copy the contents of the ``boot/`` folder to your card. 3. Use ``make rpi_defconfig; make`` to build barebox. This will create the following images: @@ -58,5 +58,5 @@ The original command-line from VideoCore device tree is available to the Barebox global linux.bootargs.vc="$global.vc.bootargs" -.. _Raspberry Pi firmware: https://codeload.github.com/raspberrypi/firmware/zip/80e1fbeb78f9df06701d28c0ed3a3060a3f557ef +.. _Raspberry Pi firmware: https://github.com/raspberrypi/firmware/archive/refs/tags/1.20220331.zip .. _documentation for config.txt: https://www.raspberrypi.org/documentation/configuration/config-txt/ -- cgit v1.2.3