From 09da8d4bab923871891e275e83c90419d9235231 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 5 Apr 2011 17:16:38 +0200 Subject: nand: remove unused nand_util file Signed-off-by: Sascha Hauer --- drivers/mtd/nand/Makefile | 1 - drivers/mtd/nand/nand_util.c | 858 ------------------------------------------- 2 files changed, 859 deletions(-) delete mode 100644 drivers/mtd/nand/nand_util.c (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index fb92f8966b..3a31bc1fb8 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -15,4 +15,3 @@ obj-$(CONFIG_NAND_IMX) += nand_imx.o obj-$(CONFIG_NAND_OMAP_GPMC) += nand_omap_gpmc.o nand_omap_bch_decoder.o obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_NAND_S3C24X0) += nand_s3c2410.o -#obj-$(CONFIG_NAND) += nand_util.o diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c deleted file mode 100644 index d57294e624..0000000000 --- a/drivers/mtd/nand/nand_util.c +++ /dev/null @@ -1,858 +0,0 @@ -/* - * drivers/nand/nand_util.c - * - * Copyright (C) 2006 by Weiss-Electronic GmbH. - * All rights reserved. - * - * @author: Guido Classen - * @descr: NAND Flash support - * @references: borrowed heavily from Linux mtd-utils code: - * flash_eraseall.c by Arcom Control System Ltd - * nandwrite.c by Steven J. Hill (sjhill@realitydiluted.com) - * and Thomas Gleixner (tglx@linutronix.de) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include -#include -#include -#include - -#include -//#include - -typedef struct erase_info erase_info_t; -typedef struct mtd_info mtd_info_t; - -/* support only for native endian JFFS2 */ -#define cpu_to_je16(x) (x) -#define cpu_to_je32(x) (x) - -/*****************************************************************************/ -static int nand_block_bad_scrub(struct mtd_info *mtd, loff_t ofs, int getchip) -{ - return 0; -} - -/** - * nand_erase_opts: - erase NAND flash with support for various options - * (jffs2 formating) - * - * @param meminfo NAND device to erase - * @param opts options, @see struct nand_erase_options - * @return 0 in case of success - * - * This code is ported from flash_eraseall.c from Linux mtd utils by - * Arcom Control System Ltd. - */ -int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) -{ - struct jffs2_unknown_node cleanmarker; - int clmpos = 0; - int clmlen = 8; - erase_info_t erase; - ulong erase_length; - int isNAND; - int bbtest = 1; - int result; - int percent_complete = -1; - int (*nand_block_bad_old)(struct mtd_info *, loff_t, int) = NULL; - const char *mtd_device = meminfo->name; - - memset(&erase, 0, sizeof(erase)); - - erase.mtd = meminfo; - erase.len = meminfo->erasesize; - erase.addr = opts->offset; - erase_length = opts->length; - - isNAND = meminfo->type == MTD_NANDFLASH ? 1 : 0; - - if (opts->jffs2) { - cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK); - cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER); - if (isNAND) { - struct nand_oobinfo *oobinfo = &meminfo->oobinfo; - - /* check for autoplacement */ - if (oobinfo->useecc == MTD_NANDECC_AUTOPLACE) { - /* get the position of the free bytes */ - if (!oobinfo->oobfree[0][1]) { - printf(" Eeep. Autoplacement selected " - "and no empty space in oob\n"); - return -1; - } - clmpos = oobinfo->oobfree[0][0]; - clmlen = oobinfo->oobfree[0][1]; - if (clmlen > 8) - clmlen = 8; - } else { - /* legacy mode */ - switch (meminfo->oobsize) { - case 8: - clmpos = 6; - clmlen = 2; - break; - case 16: - clmpos = 8; - clmlen = 8; - break; - case 64: - clmpos = 16; - clmlen = 8; - break; - } - } - - cleanmarker.totlen = cpu_to_je32(8); - } else { - cleanmarker.totlen = - cpu_to_je32(sizeof(struct jffs2_unknown_node)); - } - cleanmarker.hdr_crc = cpu_to_je32( - crc32_no_comp(0, (unsigned char *) &cleanmarker, - sizeof(struct jffs2_unknown_node) - 4)); - } - - /* scrub option allows to erase badblock. To prevent internal - * check from erase() method, set block check method to dummy - * and disable bad block table while erasing. - */ - if (opts->scrub) { - struct nand_chip *priv_nand = meminfo->priv; - - nand_block_bad_old = priv_nand->block_bad; - priv_nand->block_bad = nand_block_bad_scrub; - /* we don't need the bad block table anymore... - * after scrub, there are no bad blocks left! - */ - if (priv_nand->bbt) { - kfree(priv_nand->bbt); - } - priv_nand->bbt = NULL; - } - - for (; - erase.addr < opts->offset + erase_length; - erase.addr += meminfo->erasesize) { - - WATCHDOG_RESET (); - - if (!opts->scrub && bbtest) { - int ret = meminfo->block_isbad(meminfo, erase.addr); - if (ret > 0) { - if (!opts->quiet) - printf("\rSkipping bad block at " - "0x%08x " - " \n", - erase.addr); - continue; - - } else if (ret < 0) { - printf("\n%s: MTD get bad block failed: %d\n", - mtd_device, - ret); - return -1; - } - } - - result = meminfo->erase(meminfo, &erase); - if (result != 0) { - printf("\n%s: MTD Erase failure: %d\n", - mtd_device, result); - continue; - } - - /* format for JFFS2 ? */ - if (opts->jffs2) { - - /* write cleanmarker */ - if (isNAND) { - size_t written; - result = meminfo->write_oob(meminfo, - erase.addr + clmpos, - clmlen, - &written, - (unsigned char *) - &cleanmarker); - if (result != 0) { - printf("\n%s: MTD writeoob failure: %d\n", - mtd_device, result); - continue; - } - } else { - printf("\n%s: this erase routine only supports" - " NAND devices!\n", - mtd_device); - } - } - - if (!opts->quiet) { - int percent = (int) - ((unsigned long long) - (erase.addr+meminfo->erasesize-opts->offset) - * 100 / erase_length); - - /* output progress message only at whole percent - * steps to reduce the number of messages printed - * on (slow) serial consoles - */ - if (percent != percent_complete) { - percent_complete = percent; - - printf("\rErasing at 0x%x -- %3d%% complete.", - erase.addr, percent); - - if (opts->jffs2 && result == 0) - printf(" Cleanmarker written at 0x%x.", - erase.addr); - } - } - } - if (!opts->quiet) - printf("\n"); - - if (nand_block_bad_old) { - struct nand_chip *priv_nand = meminfo->priv; - - priv_nand->block_bad = nand_block_bad_old; - priv_nand->scan_bbt(meminfo); - } - - return 0; -} - -#define MAX_PAGE_SIZE 2048 -#define MAX_OOB_SIZE 64 - -/* - * buffer array used for writing data - */ -static unsigned char data_buf[MAX_PAGE_SIZE]; -static unsigned char oob_buf[MAX_OOB_SIZE]; - -/* OOB layouts to pass into the kernel as default */ -static struct nand_oobinfo none_oobinfo = { - .useecc = MTD_NANDECC_OFF, -}; - -static struct nand_oobinfo jffs2_oobinfo = { - .useecc = MTD_NANDECC_PLACE, - .eccbytes = 6, - .eccpos = { 0, 1, 2, 3, 6, 7 } -}; - -static struct nand_oobinfo yaffs_oobinfo = { - .useecc = MTD_NANDECC_PLACE, - .eccbytes = 6, - .eccpos = { 8, 9, 10, 13, 14, 15} -}; - -static struct nand_oobinfo autoplace_oobinfo = { - .useecc = MTD_NANDECC_AUTOPLACE -}; - -/** - * nand_write_opts: - write image to NAND flash with support for various options - * - * @param meminfo NAND device to erase - * @param opts write options (@see nand_write_options) - * @return 0 in case of success - * - * This code is ported from nandwrite.c from Linux mtd utils by - * Steven J. Hill and Thomas Gleixner. - */ -int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts) -{ - int imglen = 0; - int pagelen; - int baderaseblock; - int blockstart = -1; - loff_t offs; - int readlen; - int oobinfochanged = 0; - int percent_complete = -1; - struct nand_oobinfo old_oobinfo; - ulong mtdoffset = opts->offset; - ulong erasesize_blockalign; - u_char *buffer = opts->buffer; - size_t written; - int result; - - if (opts->pad && opts->writeoob) { - printf("Can't pad when oob data is present.\n"); - return -1; - } - - /* set erasesize to specified number of blocks - to match - * jffs2 (virtual) block size */ - if (opts->blockalign == 0) { - erasesize_blockalign = meminfo->erasesize; - } else { - erasesize_blockalign = meminfo->erasesize * opts->blockalign; - } - - /* make sure device page sizes are valid */ - if (!(meminfo->oobsize == 16 && meminfo->oobblock == 512) - && !(meminfo->oobsize == 8 && meminfo->oobblock == 256) - && !(meminfo->oobsize == 64 && meminfo->oobblock == 2048)) { - printf("Unknown flash (not normal NAND)\n"); - return -1; - } - - /* read the current oob info */ - memcpy(&old_oobinfo, &meminfo->oobinfo, sizeof(old_oobinfo)); - - /* write without ecc? */ - if (opts->noecc) { - memcpy(&meminfo->oobinfo, &none_oobinfo, - sizeof(meminfo->oobinfo)); - oobinfochanged = 1; - } - - /* autoplace ECC? */ - if (opts->autoplace && (old_oobinfo.useecc != MTD_NANDECC_AUTOPLACE)) { - - memcpy(&meminfo->oobinfo, &autoplace_oobinfo, - sizeof(meminfo->oobinfo)); - oobinfochanged = 1; - } - - /* force OOB layout for jffs2 or yaffs? */ - if (opts->forcejffs2 || opts->forceyaffs) { - struct nand_oobinfo *oobsel = - opts->forcejffs2 ? &jffs2_oobinfo : &yaffs_oobinfo; - - if (meminfo->oobsize == 8) { - if (opts->forceyaffs) { - printf("YAFSS cannot operate on " - "256 Byte page size\n"); - goto restoreoob; - } - /* Adjust number of ecc bytes */ - jffs2_oobinfo.eccbytes = 3; - } - - memcpy(&meminfo->oobinfo, oobsel, sizeof(meminfo->oobinfo)); - } - - /* get image length */ - imglen = opts->length; - pagelen = meminfo->oobblock - + ((opts->writeoob != 0) ? meminfo->oobsize : 0); - - /* check, if file is pagealigned */ - if ((!opts->pad) && ((imglen % pagelen) != 0)) { - printf("Input block length is not page aligned\n"); - goto restoreoob; - } - - /* check, if length fits into device */ - if (((imglen / pagelen) * meminfo->oobblock) - > (meminfo->size - opts->offset)) { - printf("Image %d bytes, NAND page %d bytes, " - "OOB area %u bytes, device size %u bytes\n", - imglen, pagelen, meminfo->oobblock, meminfo->size); - printf("Input block does not fit into device\n"); - goto restoreoob; - } - - if (!opts->quiet) - printf("\n"); - - /* get data from input and write to the device */ - while (imglen && (mtdoffset < meminfo->size)) { - - WATCHDOG_RESET (); - - /* - * new eraseblock, check for bad block(s). Stay in the - * loop to be sure if the offset changes because of - * a bad block, that the next block that will be - * written to is also checked. Thus avoiding errors if - * the block(s) after the skipped block(s) is also bad - * (number of blocks depending on the blockalign - */ - while (blockstart != (mtdoffset & (~erasesize_blockalign+1))) { - blockstart = mtdoffset & (~erasesize_blockalign+1); - offs = blockstart; - baderaseblock = 0; - - /* check all the blocks in an erase block for - * bad blocks */ - do { - int ret = meminfo->block_isbad(meminfo, offs); - - if (ret < 0) { - printf("Bad block check failed\n"); - goto restoreoob; - } - if (ret == 1) { - baderaseblock = 1; - if (!opts->quiet) - printf("\rBad block at 0x%lx " - "in erase block from " - "0x%x will be skipped\n", - (long) offs, - blockstart); - } - - if (baderaseblock) { - mtdoffset = blockstart - + erasesize_blockalign; - } - offs += erasesize_blockalign - / opts->blockalign; - } while (offs < blockstart + erasesize_blockalign); - } - - readlen = meminfo->oobblock; - if (opts->pad && (imglen < readlen)) { - readlen = imglen; - memset(data_buf + readlen, 0xff, - meminfo->oobblock - readlen); - } - - /* read page data from input memory buffer */ - memcpy(data_buf, buffer, readlen); - buffer += readlen; - - if (opts->writeoob) { - /* read OOB data from input memory block, exit - * on failure */ - memcpy(oob_buf, buffer, meminfo->oobsize); - buffer += meminfo->oobsize; - - /* write OOB data first, as ecc will be placed - * in there*/ - result = meminfo->write_oob(meminfo, - mtdoffset, - meminfo->oobsize, - &written, - (unsigned char *) - &oob_buf); - - if (result != 0) { - printf("\nMTD writeoob failure: %d\n", - result); - goto restoreoob; - } - imglen -= meminfo->oobsize; - } - - /* write out the page data */ - result = meminfo->write(meminfo, - mtdoffset, - meminfo->oobblock, - &written, - (unsigned char *) &data_buf); - - if (result != 0) { - printf("writing NAND page at offset 0x%lx failed\n", - mtdoffset); - goto restoreoob; - } - imglen -= readlen; - - if (!opts->quiet) { - int percent = (int) - ((unsigned long long) - (opts->length-imglen) * 100 - / opts->length); - /* output progress message only at whole percent - * steps to reduce the number of messages printed - * on (slow) serial consoles - */ - if (percent != percent_complete) { - printf("\rWriting data at 0x%x " - "-- %3d%% complete.", - mtdoffset, percent); - percent_complete = percent; - } - } - - mtdoffset += meminfo->oobblock; - } - - if (!opts->quiet) - printf("\n"); - -restoreoob: - if (oobinfochanged) { - memcpy(&meminfo->oobinfo, &old_oobinfo, - sizeof(meminfo->oobinfo)); - } - - if (imglen > 0) { - printf("Data did not fit into device, due to bad blocks\n"); - return -1; - } - - /* return happy */ - return 0; -} - -/** - * nand_read_opts: - read image from NAND flash with support for various options - * - * @param meminfo NAND device to erase - * @param opts read options (@see struct nand_read_options) - * @return 0 in case of success - * - */ -int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts) -{ - int imglen = opts->length; - int pagelen; - int baderaseblock; - int blockstart = -1; - int percent_complete = -1; - loff_t offs; - size_t readlen; - ulong mtdoffset = opts->offset; - u_char *buffer = opts->buffer; - int result; - - /* make sure device page sizes are valid */ - if (!(meminfo->oobsize == 16 && meminfo->oobblock == 512) - && !(meminfo->oobsize == 8 && meminfo->oobblock == 256) - && !(meminfo->oobsize == 64 && meminfo->oobblock == 2048)) { - printf("Unknown flash (not normal NAND)\n"); - return -1; - } - - pagelen = meminfo->oobblock - + ((opts->readoob != 0) ? meminfo->oobsize : 0); - - /* check, if length is not larger than device */ - if (((imglen / pagelen) * meminfo->oobblock) - > (meminfo->size - opts->offset)) { - printf("Image %d bytes, NAND page %d bytes, " - "OOB area %u bytes, device size %u bytes\n", - imglen, pagelen, meminfo->oobblock, meminfo->size); - printf("Input block is larger than device\n"); - return -1; - } - - if (!opts->quiet) - printf("\n"); - - /* get data from input and write to the device */ - while (imglen && (mtdoffset < meminfo->size)) { - - WATCHDOG_RESET (); - - /* - * new eraseblock, check for bad block(s). Stay in the - * loop to be sure if the offset changes because of - * a bad block, that the next block that will be - * written to is also checked. Thus avoiding errors if - * the block(s) after the skipped block(s) is also bad - * (number of blocks depending on the blockalign - */ - while (blockstart != (mtdoffset & (~meminfo->erasesize+1))) { - blockstart = mtdoffset & (~meminfo->erasesize+1); - offs = blockstart; - baderaseblock = 0; - - /* check all the blocks in an erase block for - * bad blocks */ - do { - int ret = meminfo->block_isbad(meminfo, offs); - - if (ret < 0) { - printf("Bad block check failed\n"); - return -1; - } - if (ret == 1) { - baderaseblock = 1; - if (!opts->quiet) - printf("\rBad block at 0x%lx " - "in erase block from " - "0x%x will be skipped\n", - (long) offs, - blockstart); - } - - if (baderaseblock) { - mtdoffset = blockstart - + meminfo->erasesize; - } - offs += meminfo->erasesize; - - } while (offs < blockstart + meminfo->erasesize); - } - - - /* read page data to memory buffer */ - result = meminfo->read(meminfo, - mtdoffset, - meminfo->oobblock, - &readlen, - (unsigned char *) &data_buf); - - if (result != 0) { - printf("reading NAND page at offset 0x%lx failed\n", - mtdoffset); - return -1; - } - - if (imglen < readlen) { - readlen = imglen; - } - - memcpy(buffer, data_buf, readlen); - buffer += readlen; - imglen -= readlen; - - if (opts->readoob) { - result = meminfo->read_oob(meminfo, - mtdoffset, - meminfo->oobsize, - &readlen, - (unsigned char *) - &oob_buf); - - if (result != 0) { - printf("\nMTD readoob failure: %d\n", - result); - return -1; - } - - - if (imglen < readlen) { - readlen = imglen; - } - - memcpy(buffer, oob_buf, readlen); - - buffer += readlen; - imglen -= readlen; - } - - if (!opts->quiet) { - int percent = (int) - ((unsigned long long) - (opts->length-imglen) * 100 - / opts->length); - /* output progress message only at whole percent - * steps to reduce the number of messages printed - * on (slow) serial consoles - */ - if (percent != percent_complete) { - if (!opts->quiet) - printf("\rReading data from 0x%x " - "-- %3d%% complete.", - mtdoffset, percent); - percent_complete = percent; - } - } - - mtdoffset += meminfo->oobblock; - } - - if (!opts->quiet) - printf("\n"); - - if (imglen > 0) { - printf("Could not read entire image due to bad blocks\n"); - return -1; - } - - /* return happy */ - return 0; -} - -/****************************************************************************** - * Support for locking / unlocking operations of some NAND devices - *****************************************************************************/ - -#define NAND_CMD_LOCK 0x2a -#define NAND_CMD_LOCK_TIGHT 0x2c -#define NAND_CMD_UNLOCK1 0x23 -#define NAND_CMD_UNLOCK2 0x24 -#define NAND_CMD_LOCK_STATUS 0x7a - -/** - * nand_lock: Set all pages of NAND flash chip to the LOCK or LOCK-TIGHT - * state - * - * @param meminfo nand mtd instance - * @param tight bring device in lock tight mode - * - * @return 0 on success, -1 in case of error - * - * The lock / lock-tight command only applies to the whole chip. To get some - * parts of the chip lock and others unlocked use the following sequence: - * - * - Lock all pages of the chip using nand_lock(mtd, 0) (or the lockpre pin) - * - Call nand_unlock() once for each consecutive area to be unlocked - * - If desired: Bring the chip to the lock-tight state using nand_lock(mtd, 1) - * - * If the device is in lock-tight state software can't change the - * current active lock/unlock state of all pages. nand_lock() / nand_unlock() - * calls will fail. It is only posible to leave lock-tight state by - * an hardware signal (low pulse on _WP pin) or by power down. - */ -int nand_lock(nand_info_t *meminfo, int tight) -{ - int ret = 0; - int status; - struct nand_chip *this = meminfo->priv; - - /* select the NAND device */ - this->select_chip(meminfo, 0); - - this->cmdfunc(meminfo, - (tight ? NAND_CMD_LOCK_TIGHT : NAND_CMD_LOCK), - -1, -1); - - /* call wait ready function */ - status = this->waitfunc(meminfo, this, FL_WRITING); - - /* see if device thinks it succeeded */ - if (status & 0x01) { - ret = -1; - } - - /* de-select the NAND device */ - this->select_chip(meminfo, -1); - return ret; -} - -/** - * nand_get_lock_status: - query current lock state from one page of NAND - * flash - * - * @param meminfo nand mtd instance - * @param offset page address to query (muss be page aligned!) - * - * @return -1 in case of error - * >0 lock status: - * bitfield with the following combinations: - * NAND_LOCK_STATUS_TIGHT: page in tight state - * NAND_LOCK_STATUS_LOCK: page locked - * NAND_LOCK_STATUS_UNLOCK: page unlocked - * - */ -int nand_get_lock_status(nand_info_t *meminfo, ulong offset) -{ - int ret = 0; - int chipnr; - int page; - struct nand_chip *this = meminfo->priv; - - /* select the NAND device */ - chipnr = (int)(offset >> this->chip_shift); - this->select_chip(meminfo, chipnr); - - - if ((offset & (meminfo->oobblock - 1)) != 0) { - printf ("nand_get_lock_status: " - "Start address must be beginning of " - "nand page!\n"); - ret = -1; - goto out; - } - - /* check the Lock Status */ - page = (int)(offset >> this->page_shift); - this->cmdfunc(meminfo, NAND_CMD_LOCK_STATUS, -1, page & this->pagemask); - - ret = this->read_byte(meminfo) & (NAND_LOCK_STATUS_TIGHT - | NAND_LOCK_STATUS_LOCK - | NAND_LOCK_STATUS_UNLOCK); - - out: - /* de-select the NAND device */ - this->select_chip(meminfo, -1); - return ret; -} - -/** - * nand_unlock: - Unlock area of NAND pages - * only one consecutive area can be unlocked at one time! - * - * @param meminfo nand mtd instance - * @param start start byte address - * @param length number of bytes to unlock (must be a multiple of - * page size nand->oobblock) - * - * @return 0 on success, -1 in case of error - */ -int nand_unlock(nand_info_t *meminfo, ulong start, ulong length) -{ - int ret = 0; - int chipnr; - int status; - int page; - struct nand_chip *this = meminfo->priv; - printf ("nand_unlock: start: %08x, length: %d!\n", - (int)start, (int)length); - - /* select the NAND device */ - chipnr = (int)(start >> this->chip_shift); - this->select_chip(meminfo, chipnr); - - /* check the WP bit */ - this->cmdfunc(meminfo, NAND_CMD_STATUS, -1, -1); - if ((this->read_byte(meminfo) & 0x80) == 0) { - printf ("nand_unlock: Device is write protected!\n"); - ret = -1; - goto out; - } - - if ((start & (meminfo->oobblock - 1)) != 0) { - printf ("nand_unlock: Start address must be beginning of " - "nand page!\n"); - ret = -1; - goto out; - } - - if (length == 0 || (length & (meminfo->oobblock - 1)) != 0) { - printf ("nand_unlock: Length must be a multiple of nand page " - "size!\n"); - ret = -1; - goto out; - } - - /* submit address of first page to unlock */ - page = (int)(start >> this->page_shift); - this->cmdfunc(meminfo, NAND_CMD_UNLOCK1, -1, page & this->pagemask); - - /* submit ADDRESS of LAST page to unlock */ - page += (int)(length >> this->page_shift) - 1; - this->cmdfunc(meminfo, NAND_CMD_UNLOCK2, -1, page & this->pagemask); - - /* call wait ready function */ - status = this->waitfunc(meminfo, this, FL_WRITING); - /* see if device thinks it succeeded */ - if (status & 0x01) { - /* there was an error */ - ret = -1; - goto out; - } - - out: - /* de-select the NAND device */ - this->select_chip(meminfo, -1); - return ret; -} - -- cgit v1.2.3