From e4067b75fb6ca83a58b2c342a0b3ee12e1223c4e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 21 Jun 2018 13:44:30 +0200 Subject: dts: update to v4.18-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/arm/altera/socfpga-eccmgr.txt | 233 ----------------------------- 1 file changed, 233 deletions(-) delete mode 100644 dts/Bindings/arm/altera/socfpga-eccmgr.txt (limited to 'dts/Bindings/arm/altera') diff --git a/dts/Bindings/arm/altera/socfpga-eccmgr.txt b/dts/Bindings/arm/altera/socfpga-eccmgr.txt deleted file mode 100644 index 4a1714f96b..0000000000 --- a/dts/Bindings/arm/altera/socfpga-eccmgr.txt +++ /dev/null @@ -1,233 +0,0 @@ -Altera SoCFPGA ECC Manager -This driver uses the EDAC framework to implement the SOCFPGA ECC Manager. -The ECC Manager counts and corrects single bit errors and counts/handles -double bit errors which are uncorrectable. - -Cyclone5 and Arria5 ECC Manager -Required Properties: -- compatible : Should be "altr,socfpga-ecc-manager" -- #address-cells: must be 1 -- #size-cells: must be 1 -- ranges : standard definition, should translate from local addresses - -Subcomponents: - -L2 Cache ECC -Required Properties: -- compatible : Should be "altr,socfpga-l2-ecc" -- reg : Address and size for ECC error interrupt clear registers. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt. Note the rising edge type. - -On Chip RAM ECC -Required Properties: -- compatible : Should be "altr,socfpga-ocram-ecc" -- reg : Address and size for ECC error interrupt clear registers. -- iram : phandle to On-Chip RAM definition. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt. Note the rising edge type. - -Example: - - eccmgr: eccmgr@ffd08140 { - compatible = "altr,socfpga-ecc-manager"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - l2-ecc@ffd08140 { - compatible = "altr,socfpga-l2-ecc"; - reg = <0xffd08140 0x4>; - interrupts = <0 36 1>, <0 37 1>; - }; - - ocram-ecc@ffd08144 { - compatible = "altr,socfpga-ocram-ecc"; - reg = <0xffd08144 0x4>; - iram = <&ocram>; - interrupts = <0 178 1>, <0 179 1>; - }; - }; - -Arria10 SoCFPGA ECC Manager -The Arria10 SoC ECC Manager handles the IRQs for each peripheral -in a shared register instead of individual IRQs like the Cyclone5 -and Arria5. Therefore the device tree is different as well. - -Required Properties: -- compatible : Should be "altr,socfpga-a10-ecc-manager" -- altr,sysgr-syscon : phandle to Arria10 System Manager Block - containing the ECC manager registers. -- #address-cells: must be 1 -- #size-cells: must be 1 -- interrupts : Should be single bit error interrupt, then double bit error - interrupt. -- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller -- #interrupt-cells : must be set to 2. -- ranges : standard definition, should translate from local addresses - -Subcomponents: - -L2 Cache ECC -Required Properties: -- compatible : Should be "altr,socfpga-a10-l2-ecc" -- reg : Address and size for ECC error interrupt clear registers. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -On-Chip RAM ECC -Required Properties: -- compatible : Should be "altr,socfpga-a10-ocram-ecc" -- reg : Address and size for ECC block registers. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -Ethernet FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-eth-mac-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent Ethernet node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -NAND FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-nand-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent NAND node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -DMA FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-dma-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent DMA node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -USB FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-usb-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent USB node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -QSPI FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-qspi-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent QSPI node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -SDMMC FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-sdmmc-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent SD/MMC node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order for port A, and then single bit error interrupt, - then double bit error interrupt in this order for port B. - -Example: - - eccmgr: eccmgr@ffd06000 { - compatible = "altr,socfpga-a10-ecc-manager"; - altr,sysmgr-syscon = <&sysmgr>; - #address-cells = <1>; - #size-cells = <1>; - interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 0 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - ranges; - - l2-ecc@ffd06010 { - compatible = "altr,socfpga-a10-l2-ecc"; - reg = <0xffd06010 0x4>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, - <32 IRQ_TYPE_LEVEL_HIGH>; - }; - - ocram-ecc@ff8c3000 { - compatible = "altr,socfpga-a10-ocram-ecc"; - reg = <0xff8c3000 0x90>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH>, - <33 IRQ_TYPE_LEVEL_HIGH> ; - }; - - emac0-rx-ecc@ff8c0800 { - compatible = "altr,socfpga-eth-mac-ecc"; - reg = <0xff8c0800 0x400>; - altr,ecc-parent = <&gmac0>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>, - <36 IRQ_TYPE_LEVEL_HIGH>; - }; - - emac0-tx-ecc@ff8c0c00 { - compatible = "altr,socfpga-eth-mac-ecc"; - reg = <0xff8c0c00 0x400>; - altr,ecc-parent = <&gmac0>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>, - <37 IRQ_TYPE_LEVEL_HIGH>; - }; - - nand-buf-ecc@ff8c2000 { - compatible = "altr,socfpga-nand-ecc"; - reg = <0xff8c2000 0x400>; - altr,ecc-parent = <&nand>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>, - <43 IRQ_TYPE_LEVEL_HIGH>; - }; - - nand-rd-ecc@ff8c2400 { - compatible = "altr,socfpga-nand-ecc"; - reg = <0xff8c2400 0x400>; - altr,ecc-parent = <&nand>; - interrupts = <13 IRQ_TYPE_LEVEL_HIGH>, - <45 IRQ_TYPE_LEVEL_HIGH>; - }; - - nand-wr-ecc@ff8c2800 { - compatible = "altr,socfpga-nand-ecc"; - reg = <0xff8c2800 0x400>; - altr,ecc-parent = <&nand>; - interrupts = <12 IRQ_TYPE_LEVEL_HIGH>, - <44 IRQ_TYPE_LEVEL_HIGH>; - }; - - dma-ecc@ff8c8000 { - compatible = "altr,socfpga-dma-ecc"; - reg = <0xff8c8000 0x400>; - altr,ecc-parent = <&pdma>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, - <42 IRQ_TYPE_LEVEL_HIGH>; - - usb0-ecc@ff8c8800 { - compatible = "altr,socfpga-usb-ecc"; - reg = <0xff8c8800 0x400>; - altr,ecc-parent = <&usb0>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, - <34 IRQ_TYPE_LEVEL_HIGH>; - }; - - qspi-ecc@ff8c8400 { - compatible = "altr,socfpga-qspi-ecc"; - reg = <0xff8c8400 0x400>; - altr,ecc-parent = <&qspi>; - interrupts = <14 IRQ_TYPE_LEVEL_HIGH>, - <46 IRQ_TYPE_LEVEL_HIGH>; - }; - - sdmmc-ecc@ff8c2c00 { - compatible = "altr,socfpga-sdmmc-ecc"; - reg = <0xff8c2c00 0x400>; - altr,ecc-parent = <&mmc>; - interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, - <47 IRQ_TYPE_LEVEL_HIGH>, - <16 IRQ_TYPE_LEVEL_HIGH>, - <48 IRQ_TYPE_LEVEL_HIGH>; - }; - }; -- cgit v1.2.3