From 00ce25c6dcdae5582ae4be37147ab33678adc995 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 25 Apr 2014 11:22:32 +0200 Subject: Add devicetree source files as of Linux-3.15-rc2 This adds the Linux dts files to barebox. The dts files are generated from Ian Campbells device-tree-rebasing.git: git://xenbits.xen.org/people/ianc/device-tree-rebasing.git The dts are found in dts/ in the barebox repository and will be updated from upstream regularly, probably for each upstream -rc. To keep the synchronization with upstream easy no changes to the original files are allowed under dts/. Instead changes to upstream dts files will be done using overlays in arch/$ARCH/dts/. Signed-off-by: Sascha Hauer --- dts/Bindings/c6x/clocks.txt | 40 +++++++++++++ dts/Bindings/c6x/dscr.txt | 127 +++++++++++++++++++++++++++++++++++++++++ dts/Bindings/c6x/emifa.txt | 62 ++++++++++++++++++++ dts/Bindings/c6x/interrupt.txt | 104 +++++++++++++++++++++++++++++++++ dts/Bindings/c6x/soc.txt | 28 +++++++++ dts/Bindings/c6x/timer64.txt | 26 +++++++++ 6 files changed, 387 insertions(+) create mode 100644 dts/Bindings/c6x/clocks.txt create mode 100644 dts/Bindings/c6x/dscr.txt create mode 100644 dts/Bindings/c6x/emifa.txt create mode 100644 dts/Bindings/c6x/interrupt.txt create mode 100644 dts/Bindings/c6x/soc.txt create mode 100644 dts/Bindings/c6x/timer64.txt (limited to 'dts/Bindings/c6x') diff --git a/dts/Bindings/c6x/clocks.txt b/dts/Bindings/c6x/clocks.txt new file mode 100644 index 0000000000..a04f5fd301 --- /dev/null +++ b/dts/Bindings/c6x/clocks.txt @@ -0,0 +1,40 @@ +C6X PLL Clock Controllers +------------------------- + +This is a first-cut support for the SoC clock controllers. This is still +under development and will probably change as the common device tree +clock support is added to the kernel. + +Required properties: + +- compatible: "ti,c64x+pll" + May also have SoC-specific value to support SoC-specific initialization + in the driver. One of: + "ti,c6455-pll" + "ti,c6457-pll" + "ti,c6472-pll" + "ti,c6474-pll" + +- reg: base address and size of register area +- clock-frequency: input clock frequency in hz + + +Optional properties: + +- ti,c64x+pll-bypass-delay: CPU cycles to delay when entering bypass mode + +- ti,c64x+pll-reset-delay: CPU cycles to delay after PLL reset + +- ti,c64x+pll-lock-delay: CPU cycles to delay after PLL frequency change + +Example: + + clock-controller@29a0000 { + compatible = "ti,c6472-pll", "ti,c64x+pll"; + reg = <0x029a0000 0x200>; + clock-frequency = <25000000>; + + ti,c64x+pll-bypass-delay = <200>; + ti,c64x+pll-reset-delay = <12000>; + ti,c64x+pll-lock-delay = <80000>; + }; diff --git a/dts/Bindings/c6x/dscr.txt b/dts/Bindings/c6x/dscr.txt new file mode 100644 index 0000000000..b0e97144cf --- /dev/null +++ b/dts/Bindings/c6x/dscr.txt @@ -0,0 +1,127 @@ +Device State Configuration Registers +------------------------------------ + +TI C6X SoCs contain a region of miscellaneous registers which provide various +function for SoC control or status. Details vary considerably among from SoC +to SoC with no two being alike. + +In general, the Device State Configuration Registers (DSCR) will provide one or +more configuration registers often protected by a lock register where one or +more key values must be written to a lock register in order to unlock the +configuration register for writes. These configuration register may be used to +enable (and disable in some cases) SoC pin drivers, select peripheral clock +sources (internal or pin), etc. In some cases, a configuration register is +write once or the individual bits are write once. In addition to device config, +the DSCR block may provide registers which which are used to reset peripherals, +provide device ID information, provide ethernet MAC addresses, as well as other +miscellaneous functions. + +For device state control (enable/disable), each device control is assigned an +id which is used by individual device drivers to control the state as needed. + +Required properties: + +- compatible: must be "ti,c64x+dscr" +- reg: register area base and size + +Optional properties: + + NOTE: These are optional in that not all SoCs will have all properties. For + SoCs which do support a given property, leaving the property out of the + device tree will result in reduced functionality or possibly driver + failure. + +- ti,dscr-devstat + offset of the devstat register + +- ti,dscr-silicon-rev + offset, start bit, and bitsize of silicon revision field + +- ti,dscr-rmii-resets + offset and bitmask of RMII reset field. May have multiple tuples if more + than one ethernet port is available. + +- ti,dscr-locked-regs + possibly multiple tuples describing registers which are write protected by + a lock register. Each tuple consists of the register offset, lock register + offsset, and the key value used to unlock the register. + +- ti,dscr-kick-regs + offset and key values of two "kick" registers used to write protect other + registers in DSCR. On SoCs using kick registers, the first key must be + written to the first kick register and the second key must be written to + the second register before other registers in the area are write-enabled. + +- ti,dscr-mac-fuse-regs + MAC addresses are contained in two registers. Each element of a MAC address + is contained in a single byte. This property has two tuples. Each tuple has + a register offset and four cells representing bytes in the register from + most significant to least. The value of these four cells is the MAC byte + index (1-6) of the byte within the register. A value of 0 means the byte + is unused in the MAC address. + +- ti,dscr-devstate-ctl-regs + This property describes the bitfields used to control the state of devices. + Each tuple describes a range of identical bitfields used to control one or + more devices (one bitfield per device). The layout of each tuple is: + + start_id num_ids reg enable disable start_bit nbits + + Where: + start_id is device id for the first device control in the range + num_ids is the number of device controls in the range + reg is the offset of the register holding the control bits + enable is the value to enable a device + disable is the value to disable a device (0xffffffff if cannot disable) + start_bit is the bit number of the first bit in the range + nbits is the number of bits per device control + +- ti,dscr-devstate-stat-regs + This property describes the bitfields used to provide device state status + for device states controlled by the DSCR. Each tuple describes a range of + identical bitfields used to provide status for one or more devices (one + bitfield per device). The layout of each tuple is: + + start_id num_ids reg enable disable start_bit nbits + + Where: + start_id is device id for the first device status in the range + num_ids is the number of devices covered by the range + reg is the offset of the register holding the status bits + enable is the value indicating device is enabled + disable is the value indicating device is disabled + start_bit is the bit number of the first bit in the range + nbits is the number of bits per device status + +- ti,dscr-privperm + Offset and default value for register used to set access privilege for + some SoC devices. + + +Example: + + device-state-config-regs@2a80000 { + compatible = "ti,c64x+dscr"; + reg = <0x02a80000 0x41000>; + + ti,dscr-devstat = <0>; + ti,dscr-silicon-rev = <8 28 0xf>; + ti,dscr-rmii-resets = <0x40020 0x00040000>; + + ti,dscr-locked-regs = <0x40008 0x40004 0x0f0a0b00>; + ti,dscr-devstate-ctl-regs = + <0 12 0x40008 1 0 0 2 + 12 1 0x40008 3 0 30 2 + 13 2 0x4002c 1 0xffffffff 0 1>; + ti,dscr-devstate-stat-regs = + <0 10 0x40014 1 0 0 3 + 10 2 0x40018 1 0 0 3>; + + ti,dscr-mac-fuse-regs = <0x700 1 2 3 4 + 0x704 5 6 0 0>; + + ti,dscr-privperm = <0x41c 0xaaaaaaaa>; + + ti,dscr-kick-regs = <0x38 0x83E70B13 + 0x3c 0x95A4F1E0>; + }; diff --git a/dts/Bindings/c6x/emifa.txt b/dts/Bindings/c6x/emifa.txt new file mode 100644 index 0000000000..0ff6e9b9a1 --- /dev/null +++ b/dts/Bindings/c6x/emifa.txt @@ -0,0 +1,62 @@ +External Memory Interface +------------------------- + +The emifa node describes a simple external bus controller found on some C6X +SoCs. This interface provides external busses with a number of chip selects. + +Required properties: + +- compatible: must be "ti,c64x+emifa", "simple-bus" +- reg: register area base and size +- #address-cells: must be 2 (chip-select + offset) +- #size-cells: must be 1 +- ranges: mapping from EMIFA space to parent space + + +Optional properties: + +- ti,dscr-dev-enable: Device ID if EMIF is enabled/disabled from DSCR + +- ti,emifa-burst-priority: + Number of memory transfers after which the EMIF will elevate the priority + of the oldest command in the command FIFO. Setting this field to 255 + disables this feature, thereby allowing old commands to stay in the FIFO + indefinitely. + +- ti,emifa-ce-config: + Configuration values for each of the supported chip selects. + +Example: + + emifa@70000000 { + compatible = "ti,c64x+emifa", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x70000000 0x100>; + ranges = <0x2 0x0 0xa0000000 0x00000008 + 0x3 0x0 0xb0000000 0x00400000 + 0x4 0x0 0xc0000000 0x10000000 + 0x5 0x0 0xD0000000 0x10000000>; + + ti,dscr-dev-enable = <13>; + ti,emifa-burst-priority = <255>; + ti,emifa-ce-config = <0x00240120 + 0x00240120 + 0x00240122 + 0x00240122>; + + flash@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x3 0x0 0x400000>; + bank-width = <1>; + device-width = <1>; + partition@0 { + reg = <0x0 0x400000>; + label = "NOR"; + }; + }; + }; + +This shows a flash chip attached to chip select 3. diff --git a/dts/Bindings/c6x/interrupt.txt b/dts/Bindings/c6x/interrupt.txt new file mode 100644 index 0000000000..42bb796cc4 --- /dev/null +++ b/dts/Bindings/c6x/interrupt.txt @@ -0,0 +1,104 @@ +C6X Interrupt Chips +------------------- + +* C64X+ Core Interrupt Controller + + The core interrupt controller provides 16 prioritized interrupts to the + C64X+ core. Priority 0 and 1 are used for reset and NMI respectively. + Priority 2 and 3 are reserved. Priority 4-15 are used for interrupt + sources coming from outside the core. + + Required properties: + -------------------- + - compatible: Should be "ti,c64x+core-pic"; + - #interrupt-cells: <1> + + Interrupt Specifier Definition + ------------------------------ + Single cell specifying the core interrupt priority level (4-15) where + 4 is highest priority and 15 is lowest priority. + + Example + ------- + core_pic: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <1>; + compatible = "ti,c64x+core-pic"; + }; + + + +* C64x+ Megamodule Interrupt Controller + + The megamodule PIC consists of four interrupt mupliplexers each of which + combine up to 32 interrupt inputs into a single interrupt output which + may be cascaded into the core interrupt controller. The megamodule PIC + has a total of 12 outputs cascading into the core interrupt controller. + One for each core interrupt priority level. In addition to the combined + interrupt sources, individual megamodule interrupts may be cascaded to + the core interrupt controller. When an individual interrupt is cascaded, + it is no longer handled through a megamodule interrupt combiner and is + considered to have the core interrupt controller as the parent. + + Required properties: + -------------------- + - compatible: "ti,c64x+megamod-pic" + - interrupt-controller + - #interrupt-cells: <1> + - reg: base address and size of register area + - interrupt-parent: must be core interrupt controller + - interrupts: This should have four cells; one for each interrupt combiner. + The cells contain the core priority interrupt to which the + corresponding combiner output is wired. + + Optional properties: + -------------------- + - ti,c64x+megamod-pic-mux: Array of 12 cells correspnding to the 12 core + priority interrupts. The first cell corresponds to + core priority 4 and the last cell corresponds to + core priority 15. The value of each cell is the + megamodule interrupt source which is MUXed to + the core interrupt corresponding to the cell + position. Allowed values are 4 - 127. Mapping for + interrupts 0 - 3 (combined interrupt sources) are + ignored. + + Interrupt Specifier Definition + ------------------------------ + Single cell specifying the megamodule interrupt source (4-127). Note that + interrupts mapped directly to the core with "ti,c64x+megamod-pic-mux" will + use the core interrupt controller as their parent and the specifier will + be the core priority level, not the megamodule interrupt number. + + Examples + -------- + megamod_pic: interrupt-controller@1800000 { + compatible = "ti,c64x+megamod-pic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1800000 0x1000>; + interrupt-parent = <&core_pic>; + interrupts = < 12 13 14 15 >; + }; + + This is a minimal example where all individual interrupts go through a + combiner. Combiner-0 is mapped to core interrupt 12, combiner-1 is mapped + to interrupt 13, etc. + + + megamod_pic: interrupt-controller@1800000 { + compatible = "ti,c64x+megamod-pic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1800000 0x1000>; + interrupt-parent = <&core_pic>; + interrupts = < 12 13 14 15 >; + ti,c64x+megamod-pic-mux = < 0 0 0 0 + 32 0 0 0 + 0 0 0 0 >; + }; + + This the same as the first example except that megamodule interrupt 32 is + mapped directly to core priority interrupt 8. The node using this interrupt + must set the core controller as its interrupt parent and use 8 in the + interrupt specifier value. diff --git a/dts/Bindings/c6x/soc.txt b/dts/Bindings/c6x/soc.txt new file mode 100644 index 0000000000..b1e4973b57 --- /dev/null +++ b/dts/Bindings/c6x/soc.txt @@ -0,0 +1,28 @@ +C6X System-on-Chip +------------------ + +Required properties: + +- compatible: "simple-bus" +- #address-cells: must be 1 +- #size-cells: must be 1 +- ranges + +Optional properties: + +- model: specific SoC model + +- nodes for IP blocks within SoC + + +Example: + + soc { + compatible = "simple-bus"; + model = "tms320c6455"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ... + }; diff --git a/dts/Bindings/c6x/timer64.txt b/dts/Bindings/c6x/timer64.txt new file mode 100644 index 0000000000..95911fe702 --- /dev/null +++ b/dts/Bindings/c6x/timer64.txt @@ -0,0 +1,26 @@ +Timer64 +------- + +The timer64 node describes C6X event timers. + +Required properties: + +- compatible: must be "ti,c64x+timer64" +- reg: base address and size of register region +- interrupt-parent: interrupt controller +- interrupts: interrupt id + +Optional properties: + +- ti,dscr-dev-enable: Device ID used to enable timer IP through DSCR interface. + +- ti,core-mask: on multi-core SoCs, bitmask of cores allowed to use this timer. + +Example: + timer0: timer@25e0000 { + compatible = "ti,c64x+timer64"; + ti,core-mask = < 0x01 >; + reg = <0x25e0000 0x40>; + interrupt-parent = <&megamod_pic>; + interrupts = < 16 >; + }; -- cgit v1.2.3