From 35f607bc7da71b302fd6bf3d6d48d7ea66df1195 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 11 Sep 2018 08:26:30 +0200 Subject: dts: update to v4.19-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/clock/maxim,max9485.txt | 59 ++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 dts/Bindings/clock/maxim,max9485.txt (limited to 'dts/Bindings/clock/maxim,max9485.txt') diff --git a/dts/Bindings/clock/maxim,max9485.txt b/dts/Bindings/clock/maxim,max9485.txt new file mode 100644 index 0000000000..61bec1100a --- /dev/null +++ b/dts/Bindings/clock/maxim,max9485.txt @@ -0,0 +1,59 @@ +Devicetree bindings for Maxim MAX9485 Programmable Audio Clock Generator + +This device exposes 4 clocks in total: + +- MAX9485_MCLKOUT: A gated, buffered output of the input clock of 27 MHz +- MAX9485_CLKOUT: A PLL that can be configured to 16 different discrete + frequencies +- MAX9485_CLKOUT[1,2]: Two gated outputs for MAX9485_CLKOUT + +MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set +requests. + +Required properties: +- compatible: "maxim,max9485" +- clocks: Input clock, must provice 27.000 MHz +- clock-names: Must be set to "xclk" +- #clock-cells: From common clock binding; shall be set to 1 + +Optional properties: +- reset-gpios: GPIO descriptor connected to the #RESET input pin +- vdd-supply: A regulator node for Vdd +- clock-output-names: Name of output clocks, as defined in common clock + bindings + +If not explicitly set, the output names are "mclkout", "clkout", "clkout1" +and "clkout2". + +Clocks are defined as preprocessor macros in the dt-binding header. + +Example: + + #include + + xo-27mhz: xo-27mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + &i2c0 { + max9485: audio-clock@63 { + reg = <0x63>; + compatible = "maxim,max9485"; + clock-names = "xclk"; + clocks = <&xo-27mhz>; + reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + vdd-supply = <&3v3-reg>; + #clock-cells = <1>; + }; + }; + + // Clock consumer node + + foo@0 { + compatible = "bar,foo"; + /* ... */ + clock-names = "foo-input-clk"; + clocks = <&max9485 MAX9485_CLKOUT1>; + }; -- cgit v1.2.3