From 6b85c20d46812bdbc062b863261c3e5100e30556 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 8 May 2018 08:14:56 +0200 Subject: dts: update to v4.17-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/connector/usb-connector.txt | 75 ++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 dts/Bindings/connector/usb-connector.txt (limited to 'dts/Bindings/connector/usb-connector.txt') diff --git a/dts/Bindings/connector/usb-connector.txt b/dts/Bindings/connector/usb-connector.txt new file mode 100644 index 0000000000..e1463f14af --- /dev/null +++ b/dts/Bindings/connector/usb-connector.txt @@ -0,0 +1,75 @@ +USB Connector +============= + +USB connector node represents physical USB connector. It should be +a child of USB interface controller. + +Required properties: +- compatible: describes type of the connector, must be one of: + "usb-a-connector", + "usb-b-connector", + "usb-c-connector". + +Optional properties: +- label: symbolic name for the connector, +- type: size of the connector, should be specified in case of USB-A, USB-B + non-fullsize connectors: "mini", "micro". + +Required nodes: +- any data bus to the connector should be modeled using the OF graph bindings + specified in bindings/graph.txt, unless the bus is between parent node and + the connector. Since single connector can have multpile data buses every bus + has assigned OF graph port number as follows: + 0: High Speed (HS), present in all connectors, + 1: Super Speed (SS), present in SS capable connectors, + 2: Sideband use (SBU), present in USB-C. + +Examples +-------- + +1. Micro-USB connector with HS lines routed via controller (MUIC): + +muic-max77843@66 { + ... + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; +}; + +2. USB-C connector attached to CC controller (s2mm005), HS lines routed +to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort. +DisplayPort video lines are routed to the connector via SS mux in USB3 PHY. + +ccic: s2mm005@33 { + ... + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_hs: endpoint { + remote-endpoint = <&max77865_usbc_hs>; + }; + }; + port@1 { + reg = <1>; + usb_con_ss: endpoint { + remote-endpoint = <&usbdrd_phy_ss>; + }; + }; + port@2 { + reg = <2>; + usb_con_sbu: endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; +}; -- cgit v1.2.3