From 35f607bc7da71b302fd6bf3d6d48d7ea66df1195 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 11 Sep 2018 08:26:30 +0200 Subject: dts: update to v4.19-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/connector/usb-connector.txt | 44 ++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) (limited to 'dts/Bindings/connector') diff --git a/dts/Bindings/connector/usb-connector.txt b/dts/Bindings/connector/usb-connector.txt index e1463f14af..8855bfcfd7 100644 --- a/dts/Bindings/connector/usb-connector.txt +++ b/dts/Bindings/connector/usb-connector.txt @@ -15,6 +15,33 @@ Optional properties: - type: size of the connector, should be specified in case of USB-A, USB-B non-fullsize connectors: "mini", "micro". +Optional properties for usb-c-connector: +- power-role: should be one of "source", "sink" or "dual"(DRP) if typec + connector has power support. +- try-power-role: preferred power role if "dual"(DRP) can support Try.SNK + or Try.SRC, should be "sink" for Try.SNK or "source" for Try.SRC. +- data-role: should be one of "host", "device", "dual"(DRD) if typec + connector supports USB data. + +Required properties for usb-c-connector with power delivery support: +- source-pdos: An array of u32 with each entry providing supported power + source data object(PDO), the detailed bit definitions of PDO can be found + in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2 + Source_Capabilities Message, the order of each entry(PDO) should follow + the PD spec chapter 6.4.1. Required for power source and power dual role. + User can specify the source PDO array via PDO_FIXED/BATT/VAR() defined in + dt-bindings/usb/pd.h. +- sink-pdos: An array of u32 with each entry providing supported power + sink data object(PDO), the detailed bit definitions of PDO can be found + in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3 + Sink Capabilities Message, the order of each entry(PDO) should follow + the PD spec chapter 6.4.1. Required for power sink and power dual role. + User can specify the sink PDO array via PDO_FIXED/BATT/VAR() defined in + dt-bindings/usb/pd.h. +- op-sink-microwatt: Sink required operating power in microwatt, if source + can't offer the power, Capability Mismatch is set. Required for power + sink and power dual role. + Required nodes: - any data bus to the connector should be modeled using the OF graph bindings specified in bindings/graph.txt, unless the bus is between parent node and @@ -73,3 +100,20 @@ ccic: s2mm005@33 { }; }; }; + +3. USB-C connector attached to a typec port controller(ptn5110), which has +power delivery support and enables drp. + +typec: ptn5110@50 { + ... + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; +}; -- cgit v1.2.3