From 2036f2866753a28b2783ad6dc78a40ca5345e6d8 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 15 Oct 2019 10:55:58 +0200 Subject: dts: update to v5.4-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/cpu/cpu-topology.txt | 553 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 553 insertions(+) create mode 100644 dts/Bindings/cpu/cpu-topology.txt (limited to 'dts/Bindings/cpu') diff --git a/dts/Bindings/cpu/cpu-topology.txt b/dts/Bindings/cpu/cpu-topology.txt new file mode 100644 index 0000000000..9991818940 --- /dev/null +++ b/dts/Bindings/cpu/cpu-topology.txt @@ -0,0 +1,553 @@ +=========================================== +CPU topology binding description +=========================================== + +=========================================== +1 - Introduction +=========================================== + +In a SMP system, the hierarchy of CPUs is defined through three entities that +are used to describe the layout of physical CPUs in the system: + +- socket +- cluster +- core +- thread + +The bottom hierarchy level sits at core or thread level depending on whether +symmetric multi-threading (SMT) is supported or not. + +For instance in a system where CPUs support SMT, "cpu" nodes represent all +threads existing in the system and map to the hierarchy level "thread" above. +In systems where SMT is not supported "cpu" nodes represent all cores present +in the system and map to the hierarchy level "core" above. + +CPU topology bindings allow one to associate cpu nodes with hierarchical groups +corresponding to the system hierarchy; syntactically they are defined as device +tree nodes. + +Currently, only ARM/RISC-V intend to use this cpu topology binding but it may be +used for any other architecture as well. + +The cpu nodes, as per bindings defined in [4], represent the devices that +correspond to physical CPUs and are to be mapped to the hierarchy levels. + +A topology description containing phandles to cpu nodes that are not compliant +with bindings standardized in [4] is therefore considered invalid. + +=========================================== +2 - cpu-map node +=========================================== + +The ARM/RISC-V CPU topology is defined within the cpu-map node, which is a direct +child of the cpus node and provides a container where the actual topology +nodes are listed. + +- cpu-map node + + Usage: Optional - On SMP systems provide CPUs topology to the OS. + Uniprocessor systems do not require a topology + description and therefore should not define a + cpu-map node. + + Description: The cpu-map node is just a container node where its + subnodes describe the CPU topology. + + Node name must be "cpu-map". + + The cpu-map node's parent node must be the cpus node. + + The cpu-map node's child nodes can be: + + - one or more cluster nodes or + - one or more socket nodes in a multi-socket system + + Any other configuration is considered invalid. + +The cpu-map node can only contain 4 types of child nodes: + +- socket node +- cluster node +- core node +- thread node + +whose bindings are described in paragraph 3. + +The nodes describing the CPU topology (socket/cluster/core/thread) can +only be defined within the cpu-map node and every core/thread in the +system must be defined within the topology. Any other configuration is +invalid and therefore must be ignored. + +=========================================== +2.1 - cpu-map child nodes naming convention +=========================================== + +cpu-map child nodes must follow a naming convention where the node name +must be "socketN", "clusterN", "coreN", "threadN" depending on the node type +(ie socket/cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes +which are siblings within a single common parent node must be given a unique and +sequential N value, starting from 0). +cpu-map child nodes which do not share a common parent node can have the same +name (ie same number N as other cpu-map child nodes at different device tree +levels) since name uniqueness will be guaranteed by the device tree hierarchy. + +=========================================== +3 - socket/cluster/core/thread node bindings +=========================================== + +Bindings for socket/cluster/cpu/thread nodes are defined as follows: + +- socket node + + Description: must be declared within a cpu-map node, one node + per physical socket in the system. A system can + contain single or multiple physical socket. + The association of sockets and NUMA nodes is beyond + the scope of this bindings, please refer [2] for + NUMA bindings. + + This node is optional for a single socket system. + + The socket node name must be "socketN" as described in 2.1 above. + A socket node can not be a leaf node. + + A socket node's child nodes must be one or more cluster nodes. + + Any other configuration is considered invalid. + +- cluster node + + Description: must be declared within a cpu-map node, one node + per cluster. A system can contain several layers of + clustering within a single physical socket and cluster + nodes can be contained in parent cluster nodes. + + The cluster node name must be "clusterN" as described in 2.1 above. + A cluster node can not be a leaf node. + + A cluster node's child nodes must be: + + - one or more cluster nodes; or + - one or more core nodes + + Any other configuration is considered invalid. + +- core node + + Description: must be declared in a cluster node, one node per core in + the cluster. If the system does not support SMT, core + nodes are leaf nodes, otherwise they become containers of + thread nodes. + + The core node name must be "coreN" as described in 2.1 above. + + A core node must be a leaf node if SMT is not supported. + + Properties for core nodes that are leaf nodes: + + - cpu + Usage: required + Value type: + Definition: a phandle to the cpu node that corresponds to the + core node. + + If a core node is not a leaf node (CPUs supporting SMT) a core node's + child nodes can be: + + - one or more thread nodes + + Any other configuration is considered invalid. + +- thread node + + Description: must be declared in a core node, one node per thread + in the core if the system supports SMT. Thread nodes are + always leaf nodes in the device tree. + + The thread node name must be "threadN" as described in 2.1 above. + + A thread node must be a leaf node. + + A thread node must contain the following property: + + - cpu + Usage: required + Value type: + Definition: a phandle to the cpu node that corresponds to + the thread node. + +=========================================== +4 - Example dts +=========================================== + +Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters in a single +physical socket): + +cpus { + #size-cells = <0>; + #address-cells = <2>; + + cpu-map { + socket0 { + cluster0 { + cluster0 { + core0 { + thread0 { + cpu = <&CPU0>; + }; + thread1 { + cpu = <&CPU1>; + }; + }; + + core1 { + thread0 { + cpu = <&CPU2>; + }; + thread1 { + cpu = <&CPU3>; + }; + }; + }; + + cluster1 { + core0 { + thread0 { + cpu = <&CPU4>; + }; + thread1 { + cpu = <&CPU5>; + }; + }; + + core1 { + thread0 { + cpu = <&CPU6>; + }; + thread1 { + cpu = <&CPU7>; + }; + }; + }; + }; + + cluster1 { + cluster0 { + core0 { + thread0 { + cpu = <&CPU8>; + }; + thread1 { + cpu = <&CPU9>; + }; + }; + core1 { + thread0 { + cpu = <&CPU10>; + }; + thread1 { + cpu = <&CPU11>; + }; + }; + }; + + cluster1 { + core0 { + thread0 { + cpu = <&CPU12>; + }; + thread1 { + cpu = <&CPU13>; + }; + }; + core1 { + thread0 { + cpu = <&CPU14>; + }; + thread1 { + cpu = <&CPU15>; + }; + }; + }; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU4: cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10000>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU5: cpu@10001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10001>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU6: cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU7: cpu@10101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU8: cpu@100000000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU9: cpu@100000001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU10: cpu@100000100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU11: cpu@100000101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU12: cpu@100010000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10000>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU13: cpu@100010001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10001>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU14: cpu@100010100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + CPU15: cpu@100010101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; +}; + +Example 2 (ARM 32-bit, dual-cluster, 8-cpu system, no SMT): + +cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + }; +}; + +Example 3: HiFive Unleashed (RISC-V 64 bit, 4 core system) + +{ + #address-cells = <2>; + #size-cells = <2>; + compatible = "sifive,fu540g", "sifive,fu500"; + model = "sifive,hifive-unleashed-a00"; + + ... + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + socket0 { + cluster0 { + core0 { + cpu = <&CPU1>; + }; + core1 { + cpu = <&CPU2>; + }; + core2 { + cpu0 = <&CPU2>; + }; + core3 { + cpu0 = <&CPU3>; + }; + }; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "sifive,rocket0", "riscv"; + reg = <0x1>; + } + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "sifive,rocket0", "riscv"; + reg = <0x2>; + } + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "sifive,rocket0", "riscv"; + reg = <0x3>; + } + CPU4: cpu@4 { + device_type = "cpu"; + compatible = "sifive,rocket0", "riscv"; + reg = <0x4>; + } + } +}; +=============================================================================== +[1] ARM Linux kernel documentation + Documentation/devicetree/bindings/arm/cpus.yaml +[2] Devicetree NUMA binding description + Documentation/devicetree/bindings/numa.txt +[3] RISC-V Linux kernel documentation + Documentation/devicetree/bindings/riscv/cpus.txt +[4] https://www.devicetree.org/specifications/ -- cgit v1.2.3