From 646d1a09f05689a3a4781112a3b3e4747d0ba231 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 7 Nov 2018 09:48:28 +0100 Subject: dts: update to v4.20-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/display/exynos/exynos_dsim.txt | 25 ++++++------------------- 1 file changed, 6 insertions(+), 19 deletions(-) (limited to 'dts/Bindings/display/exynos') diff --git a/dts/Bindings/display/exynos/exynos_dsim.txt b/dts/Bindings/display/exynos/exynos_dsim.txt index 2fff8b406f..be377786e8 100644 --- a/dts/Bindings/display/exynos/exynos_dsim.txt +++ b/dts/Bindings/display/exynos/exynos_dsim.txt @@ -21,6 +21,9 @@ Required properties: - samsung,pll-clock-frequency: specifies frequency of the oscillator clock - #address-cells, #size-cells: should be set respectively to <1> and <0> according to DSI host bindings (see MIPI DSI bindings [1]) + - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst + mode + - samsung,esc-clock-frequency: specifies DSI frequency in escape mode Optional properties: - power-domains: a phandle to DSIM power domain node @@ -29,25 +32,9 @@ Child nodes: Should contain DSI peripheral nodes (see MIPI DSI bindings [1]). Video interfaces: - Device node can contain video interface port nodes according to [2]. - The following are properties specific to those nodes: - - port node inbound: - - reg: (required) must be 0. - port node outbound: - - reg: (required) must be 1. - - endpoint node connected from mic node (reg = 0): - - remote-endpoint: specifies the endpoint in mic node. This node is required - for Exynos5433 mipi dsi. So mic can access to panel node - throughout this dsi node. - endpoint node connected to panel node (reg = 1): - - remote-endpoint: specifies the endpoint in panel node. This node is - required in all kinds of exynos mipi dsi to represent - the connection between mipi dsi and panel. - - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst - mode - - samsung,esc-clock-frequency: specifies DSI frequency in escape mode + Device node can contain following video interface port nodes according to [2]: + 0: RGB input, + 1: DSI output [1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt [2]: Documentation/devicetree/bindings/media/video-interfaces.txt -- cgit v1.2.3