From 00ce25c6dcdae5582ae4be37147ab33678adc995 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 25 Apr 2014 11:22:32 +0200 Subject: Add devicetree source files as of Linux-3.15-rc2 This adds the Linux dts files to barebox. The dts files are generated from Ian Campbells device-tree-rebasing.git: git://xenbits.xen.org/people/ianc/device-tree-rebasing.git The dts are found in dts/ in the barebox repository and will be updated from upstream regularly, probably for each upstream -rc. To keep the synchronization with upstream easy no changes to the original files are allowed under dts/. Instead changes to upstream dts files will be done using overlays in arch/$ARCH/dts/. Signed-off-by: Sascha Hauer --- dts/Bindings/gpio/cirrus,clps711x-mctrl-gpio.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 dts/Bindings/gpio/cirrus,clps711x-mctrl-gpio.txt (limited to 'dts/Bindings/gpio/cirrus,clps711x-mctrl-gpio.txt') diff --git a/dts/Bindings/gpio/cirrus,clps711x-mctrl-gpio.txt b/dts/Bindings/gpio/cirrus,clps711x-mctrl-gpio.txt new file mode 100644 index 0000000000..94ae9f82dc --- /dev/null +++ b/dts/Bindings/gpio/cirrus,clps711x-mctrl-gpio.txt @@ -0,0 +1,17 @@ +* ARM Cirrus Logic CLPS711X SYSFLG1 MCTRL GPIOs + +Required properties: +- compatible: Should contain "cirrus,clps711x-mctrl-gpio". +- gpio-controller: Marks the device node as a gpio controller. +- #gpio-cells: Should be two. The first cell is the pin number and + the second cell is used to specify the gpio polarity: + 0 = Active high, + 1 = Active low. + +Example: + sysgpio: sysgpio { + compatible = "cirrus,ep7312-mctrl-gpio", + "cirrus,clps711x-mctrl-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; -- cgit v1.2.3