From 3f2f5980d517b6a71ffe54e615bd3a4b58b1c295 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 17 Nov 2021 07:36:09 +0100 Subject: dts: update to v5.16-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/gpio/gpio-xlp.txt | 49 ------------------------------------------ 1 file changed, 49 deletions(-) delete mode 100644 dts/Bindings/gpio/gpio-xlp.txt (limited to 'dts/Bindings/gpio/gpio-xlp.txt') diff --git a/dts/Bindings/gpio/gpio-xlp.txt b/dts/Bindings/gpio/gpio-xlp.txt deleted file mode 100644 index 47fc64922f..0000000000 --- a/dts/Bindings/gpio/gpio-xlp.txt +++ /dev/null @@ -1,49 +0,0 @@ -Netlogic XLP Family GPIO -======================== - -This GPIO driver is used for following Netlogic XLP SoCs: - XLP832, XLP316, XLP208, XLP980, XLP532 -This GPIO driver is also compatible with GPIO controller found on -Broadcom Vulcan ARM64. - -Required properties: -------------------- - -- compatible: Should be one of the following: - - "netlogic,xlp832-gpio": For Netlogic XLP832 - - "netlogic,xlp316-gpio": For Netlogic XLP316 - - "netlogic,xlp208-gpio": For Netlogic XLP208 - - "netlogic,xlp980-gpio": For Netlogic XLP980 - - "netlogic,xlp532-gpio": For Netlogic XLP532 - - "brcm,vulcan-gpio": For Broadcom Vulcan ARM64 -- reg: Physical base address and length of the controller's registers. -- #gpio-cells: Should be two. The first cell is the pin number and the second - cell is used to specify optional parameters (currently unused). -- gpio-controller: Marks the device node as a GPIO controller. -- nr-gpios: Number of GPIO pins supported by the controller. -- interrupt-cells: Should be two. The first cell is the GPIO Number. The - second cell is used to specify flags. The following subset of flags is - supported: - - trigger type: - 1 = low to high edge triggered. - 2 = high to low edge triggered. - 4 = active high level-sensitive. - 8 = active low level-sensitive. -- interrupts: Interrupt number for this device. -- interrupt-controller: Identifies the node as an interrupt controller. - -Example: - - gpio: xlp_gpio@34000 { - compatible = "netlogic,xlp316-gpio"; - reg = <0 0x34100 0x1000 - 0 0x35100 0x1000>; - #gpio-cells = <2>; - gpio-controller; - nr-gpios = <57>; - - #interrupt-cells = <2>; - interrupt-parent = <&pic>; - interrupts = <39>; - interrupt-controller; - }; -- cgit v1.2.3