From 33fdc89d4cbd74aa54c28dc61d62972ab164e64d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 14 Jan 2019 09:09:57 +0100 Subject: dts: update to v5.0-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/iio/accel/lis302.txt | 4 +- dts/Bindings/iio/adc/ad7949.txt | 16 ++++++ dts/Bindings/iio/adc/adc.txt | 23 ++++++++ dts/Bindings/iio/adc/adi,ad7124.txt | 75 +++++++++++++++++++++++++++ dts/Bindings/iio/adc/amlogic,meson-saradc.txt | 6 +++ dts/Bindings/iio/adc/qcom,spmi-vadc.txt | 6 ++- dts/Bindings/iio/adc/samsung,exynos-adc.txt | 4 +- dts/Bindings/iio/adc/ti-adc128s052.txt | 9 +++- dts/Bindings/iio/dac/ti,dac7311.txt | 23 ++++++++ dts/Bindings/iio/imu/st_lsm6dsx.txt | 1 + dts/Bindings/iio/light/vcnl4035.txt | 18 +++++++ dts/Bindings/iio/magnetometer/mag3110.txt | 27 ++++++++++ dts/Bindings/iio/magnetometer/pni,rm3100.txt | 20 +++++++ dts/Bindings/iio/potentiometer/mcp41010.txt | 28 ++++++++++ dts/Bindings/iio/resolver/ad2s90.txt | 31 +++++++++++ dts/Bindings/iio/st-sensors.txt | 2 + 16 files changed, 288 insertions(+), 5 deletions(-) create mode 100644 dts/Bindings/iio/adc/ad7949.txt create mode 100644 dts/Bindings/iio/adc/adc.txt create mode 100644 dts/Bindings/iio/adc/adi,ad7124.txt create mode 100644 dts/Bindings/iio/dac/ti,dac7311.txt create mode 100644 dts/Bindings/iio/light/vcnl4035.txt create mode 100644 dts/Bindings/iio/magnetometer/mag3110.txt create mode 100644 dts/Bindings/iio/magnetometer/pni,rm3100.txt create mode 100644 dts/Bindings/iio/potentiometer/mcp41010.txt create mode 100644 dts/Bindings/iio/resolver/ad2s90.txt (limited to 'dts/Bindings/iio') diff --git a/dts/Bindings/iio/accel/lis302.txt b/dts/Bindings/iio/accel/lis302.txt index dfdce67826..764e28ec1a 100644 --- a/dts/Bindings/iio/accel/lis302.txt +++ b/dts/Bindings/iio/accel/lis302.txt @@ -64,7 +64,7 @@ Optional properties for all bus drivers: Example for a SPI device node: - lis302@0 { + accelerometer@0 { compatible = "st,lis302dl-spi"; reg = <0>; spi-max-frequency = <1000000>; @@ -89,7 +89,7 @@ Example for a SPI device node: Example for a I2C device node: - lis331dlh: lis331dlh@18 { + lis331dlh: accelerometer@18 { compatible = "st,lis331dlh", "st,lis3lv02d"; reg = <0x18>; Vdd-supply = <&lis3_reg>; diff --git a/dts/Bindings/iio/adc/ad7949.txt b/dts/Bindings/iio/adc/ad7949.txt new file mode 100644 index 0000000000..c7f5057356 --- /dev/null +++ b/dts/Bindings/iio/adc/ad7949.txt @@ -0,0 +1,16 @@ +* Analog Devices AD7949/AD7682/AD7689 + +Required properties: + - compatible: Should be one of + * "adi,ad7949" + * "adi,ad7682" + * "adi,ad7689" + - reg: spi chip select number for the device + - vref-supply: The regulator supply for ADC reference voltage + +Example: +adc@0 { + compatible = "adi,ad7949"; + reg = <0>; + vref-supply = <&vdd_supply>; +}; diff --git a/dts/Bindings/iio/adc/adc.txt b/dts/Bindings/iio/adc/adc.txt new file mode 100644 index 0000000000..5bbaa330a2 --- /dev/null +++ b/dts/Bindings/iio/adc/adc.txt @@ -0,0 +1,23 @@ +Common ADCs properties + +Optional properties for child nodes: +- bipolar : Boolean, if set the channel is used in bipolar mode. +- diff-channels : Differential channels muxed for this ADC. The first value + specifies the positive input pin, the second value the negative + input pin. + +Example: + adc@0 { + compatible = "some,adc"; + ... + channel@0 { + bipolar; + diff-channels = <0 1>; + ... + }; + + channel@1 { + diff-channels = <2 3>; + ... + }; + }; diff --git a/dts/Bindings/iio/adc/adi,ad7124.txt b/dts/Bindings/iio/adc/adi,ad7124.txt new file mode 100644 index 0000000000..416273dce5 --- /dev/null +++ b/dts/Bindings/iio/adc/adi,ad7124.txt @@ -0,0 +1,75 @@ +Analog Devices AD7124 ADC device driver + +Required properties for the AD7124: + - compatible: Must be one of "adi,ad7124-4" or "adi,ad7124-8" + - reg: SPI chip select number for the device + - spi-max-frequency: Max SPI frequency to use + see: Documentation/devicetree/bindings/spi/spi-bus.txt + - clocks: phandle to the master clock (mclk) + see: Documentation/devicetree/bindings/clock/clock-bindings.txt + - clock-names: Must be "mclk". + - interrupts: IRQ line for the ADC + see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + + Required properties: + * #address-cells: Must be 1. + * #size-cells: Must be 0. + + Subnode(s) represent the external channels which are connected to the ADC. + Each subnode represents one channel and has the following properties: + Required properties: + * reg: The channel number. It can have up to 4 channels on ad7124-4 + and 8 channels on ad7124-8, numbered from 0 to 15. + * diff-channels: see: Documentation/devicetree/bindings/iio/adc/adc.txt + + Optional properties: + * bipolar: see: Documentation/devicetree/bindings/iio/adc/adc.txt + * adi,reference-select: Select the reference source to use when + converting on the the specific channel. Valid values are: + 0: REFIN1(+)/REFIN1(−). + 1: REFIN2(+)/REFIN2(−). + 3: AVDD + If this field is left empty, internal reference is selected. + +Optional properties: + - refin1-supply: refin1 supply can be used as reference for conversion. + - refin2-supply: refin2 supply can be used as reference for conversion. + - avdd-supply: avdd supply can be used as reference for conversion. + +Example: + adc@0 { + compatible = "adi,ad7124-4"; + reg = <0>; + spi-max-frequency = <5000000>; + interrupts = <25 2>; + interrupt-parent = <&gpio>; + refin1-supply = <&adc_vref>; + clocks = <&ad7124_mclk>; + clock-names = "mclk"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + diff-channels = <0 1>; + adi,reference-select = <0>; + }; + + channel@1 { + reg = <1>; + bipolar; + diff-channels = <2 3>; + adi,reference-select = <0>; + }; + + channel@2 { + reg = <2>; + diff-channels = <4 5>; + }; + + channel@3 { + reg = <3>; + diff-channels = <6 7>; + }; + }; diff --git a/dts/Bindings/iio/adc/amlogic,meson-saradc.txt b/dts/Bindings/iio/adc/amlogic,meson-saradc.txt index 54b823f3a4..325090e43c 100644 --- a/dts/Bindings/iio/adc/amlogic,meson-saradc.txt +++ b/dts/Bindings/iio/adc/amlogic,meson-saradc.txt @@ -22,6 +22,12 @@ Required properties: - vref-supply: the regulator supply for the ADC reference voltage - #io-channel-cells: must be 1, see ../iio-bindings.txt +Optional properties: +- nvmem-cells: phandle to the temperature_calib eFuse cells +- nvmem-cell-names: if present (to enable the temperature sensor + calibration) this must contain "temperature_calib" + + Example: saradc: adc@8680 { compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; diff --git a/dts/Bindings/iio/adc/qcom,spmi-vadc.txt b/dts/Bindings/iio/adc/qcom,spmi-vadc.txt index b3c86f4ac7..c81993f8d8 100644 --- a/dts/Bindings/iio/adc/qcom,spmi-vadc.txt +++ b/dts/Bindings/iio/adc/qcom,spmi-vadc.txt @@ -140,6 +140,10 @@ VADC_GND_REF and VADC_VDD_VADC. Example: +#include +#include +/* ... */ + /* VADC node */ pmic_vadc: vadc@3100 { compatible = "qcom,spmi-vadc"; @@ -151,7 +155,7 @@ Example: io-channel-ranges; /* Channel node */ - usb_id_nopull { + adc-chan@VADC_LR_MUX10_USB_ID { reg = ; qcom,decimation = <512>; qcom,ratiometric; diff --git a/dts/Bindings/iio/adc/samsung,exynos-adc.txt b/dts/Bindings/iio/adc/samsung,exynos-adc.txt index 6c49db7f8a..a10c1f8903 100644 --- a/dts/Bindings/iio/adc/samsung,exynos-adc.txt +++ b/dts/Bindings/iio/adc/samsung,exynos-adc.txt @@ -11,7 +11,7 @@ New driver handles the following Required properties: - compatible: Must be "samsung,exynos-adc-v1" - for exynos4412/5250 and s5pv210 controllers. + for exynos4412/5250 controllers. Must be "samsung,exynos-adc-v2" for future controllers. Must be "samsung,exynos3250-adc" for @@ -28,6 +28,8 @@ Required properties: the ADC in s3c2443 and compatibles Must be "samsung,s3c6410-adc" for the ADC in s3c6410 and compatibles + Must be "samsung,s5pv210-adc" for + the ADC in s5pv210 and compatibles - reg: List of ADC register address range - The base address and range of ADC register - The base address and range of ADC_PHY register (every diff --git a/dts/Bindings/iio/adc/ti-adc128s052.txt b/dts/Bindings/iio/adc/ti-adc128s052.txt index daa2b2c294..c07ce1a3f5 100644 --- a/dts/Bindings/iio/adc/ti-adc128s052.txt +++ b/dts/Bindings/iio/adc/ti-adc128s052.txt @@ -1,7 +1,14 @@ * Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip Required properties: - - compatible: Should be "ti,adc128s052", "ti,adc122s021" or "ti,adc124s021" + - compatible: Should be one of: + - "ti,adc128s052" + - "ti,adc122s021" + - "ti,adc122s051" + - "ti,adc122s101" + - "ti,adc124s021" + - "ti,adc124s051" + - "ti,adc124s101" - reg: spi chip select number for the device - vref-supply: The regulator supply for ADC reference voltage diff --git a/dts/Bindings/iio/dac/ti,dac7311.txt b/dts/Bindings/iio/dac/ti,dac7311.txt new file mode 100644 index 0000000000..e5a507db5e --- /dev/null +++ b/dts/Bindings/iio/dac/ti,dac7311.txt @@ -0,0 +1,23 @@ +TI DAC7311 device tree bindings + +Required properties: +- compatible: must be set to: + * "ti,dac7311" + * "ti,dac6311" + * "ti,dac5311" +- reg: spi chip select number for the device +- vref-supply: The regulator supply for ADC reference voltage + +Optional properties: +- spi-max-frequency: Max SPI frequency to use + +Example: + + spi_master { + dac@0 { + compatible = "ti,dac7311"; + reg = <0>; /* CS0 */ + spi-max-frequency = <1000000>; + vref-supply = <&vdd_supply>; + }; + }; diff --git a/dts/Bindings/iio/imu/st_lsm6dsx.txt b/dts/Bindings/iio/imu/st_lsm6dsx.txt index 879322ad50..69d53d98d0 100644 --- a/dts/Bindings/iio/imu/st_lsm6dsx.txt +++ b/dts/Bindings/iio/imu/st_lsm6dsx.txt @@ -13,6 +13,7 @@ Required properties: Optional properties: - st,drdy-int-pin: the pin on the package that will be used to signal "data ready" (valid values: 1 or 2). +- st,pullups : enable/disable internal i2c controller pullup resistors. - drive-open-drain: the interrupt/data ready line will be configured as open drain, which is useful if several sensors share the same interrupt line. This is a boolean property. diff --git a/dts/Bindings/iio/light/vcnl4035.txt b/dts/Bindings/iio/light/vcnl4035.txt new file mode 100644 index 0000000000..c07c7f0525 --- /dev/null +++ b/dts/Bindings/iio/light/vcnl4035.txt @@ -0,0 +1,18 @@ +VISHAY VCNL4035 - Ambient Light and proximity sensor + +Link to datasheet: https://www.vishay.com/docs/84251/vcnl4035x01.pdf + +Required properties: + + -compatible: should be "vishay,vcnl4035" + -reg: I2C address of the sensor, should be 0x60 + -interrupts: interrupt mapping for GPIO IRQ (level active low) + +Example: + +light-sensor@60 { + compatible = "vishay,vcnl4035"; + reg = <0x60>; + interrupt-parent = <&gpio4>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/dts/Bindings/iio/magnetometer/mag3110.txt b/dts/Bindings/iio/magnetometer/mag3110.txt new file mode 100644 index 0000000000..bdd40bcaaa --- /dev/null +++ b/dts/Bindings/iio/magnetometer/mag3110.txt @@ -0,0 +1,27 @@ +* FREESCALE MAG3110 magnetometer sensor + +Required properties: + + - compatible : should be "fsl,mag3110" + - reg : the I2C address of the magnetometer + +Optional properties: + + - interrupts: the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic interrupt client + node bindings. + + - vdd-supply: phandle to the regulator that provides power to the sensor. + - vddio-supply: phandle to the regulator that provides power to the sensor's IO. + +Example: + +magnetometer@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_mag3110_int>; + interrupt-parent = <&gpio3>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; +}; diff --git a/dts/Bindings/iio/magnetometer/pni,rm3100.txt b/dts/Bindings/iio/magnetometer/pni,rm3100.txt new file mode 100644 index 0000000000..497c932e9e --- /dev/null +++ b/dts/Bindings/iio/magnetometer/pni,rm3100.txt @@ -0,0 +1,20 @@ +* PNI RM3100 3-axis magnetometer sensor + +Required properties: + +- compatible : should be "pni,rm3100" +- reg : the I2C address or SPI chip select number of the sensor. + +Optional properties: + +- interrupts: data ready (DRDY) from the chip. + The interrupts can be triggered on level high. + +Example: + +rm3100: rm3100@20 { + compatible = "pni,rm3100"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/dts/Bindings/iio/potentiometer/mcp41010.txt b/dts/Bindings/iio/potentiometer/mcp41010.txt new file mode 100644 index 0000000000..566711b995 --- /dev/null +++ b/dts/Bindings/iio/potentiometer/mcp41010.txt @@ -0,0 +1,28 @@ +* Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer + +Datasheet publicly available at: +http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in + + Documentation/devicetree/bindings/spi/spi-bus.txt + +must be specified. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "microchip,mcp41010" + "microchip,mcp41050" + "microchip,mcp41100" + "microchip,mcp42010" + "microchip,mcp42050" + "microchip,mcp42100" + +Example: +potentiometer@0 { + compatible = "microchip,mcp41010"; + reg = <0>; + spi-max-frequency = <500000>; +}; diff --git a/dts/Bindings/iio/resolver/ad2s90.txt b/dts/Bindings/iio/resolver/ad2s90.txt new file mode 100644 index 0000000000..477d41fa64 --- /dev/null +++ b/dts/Bindings/iio/resolver/ad2s90.txt @@ -0,0 +1,31 @@ +Analog Devices AD2S90 Resolver-to-Digital Converter + +https://www.analog.com/en/products/ad2s90.html + +Required properties: + - compatible: should be "adi,ad2s90" + - reg: SPI chip select number for the device + - spi-max-frequency: set maximum clock frequency, must be 830000 + - spi-cpol and spi-cpha: + Either SPI mode (0,0) or (1,1) must be used, so specify none or both of + spi-cpha, spi-cpol. + +See for more details: + Documentation/devicetree/bindings/spi/spi-bus.txt + +Note about max frequency: + Chip's max frequency, as specified in its datasheet, is 2Mhz. But a 600ns + delay is expected between the application of a logic LO to CS and the + application of SCLK, as also specified. And since the delay is not + implemented in the spi code, to satisfy it, SCLK's period should be at most + 2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which gives + roughly 830000Hz. + +Example: +resolver@0 { + compatible = "adi,ad2s90"; + reg = <0>; + spi-max-frequency = <830000>; + spi-cpol; + spi-cpha; +}; diff --git a/dts/Bindings/iio/st-sensors.txt b/dts/Bindings/iio/st-sensors.txt index 6f626f7341..ddcb955095 100644 --- a/dts/Bindings/iio/st-sensors.txt +++ b/dts/Bindings/iio/st-sensors.txt @@ -48,6 +48,7 @@ Accelerometers: - st,lis3l02dq - st,lis2dw12 - st,lis3dhh +- st,lis3de Gyroscopes: - st,l3g4200d-gyro @@ -67,6 +68,7 @@ Magnetometers: - st,lsm303dlm-magn - st,lis3mdl-magn - st,lis2mdl +- st,lsm9ds1-magn Pressure sensors: - st,lps001wp-press -- cgit v1.2.3