From bb2de9a333d17bb1b048ad208002501226b83f03 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 6 Jun 2017 08:07:28 +0200 Subject: dts: update to v4.12-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/input/ads7846.txt | 94 ------------------------------------------ 1 file changed, 94 deletions(-) delete mode 100644 dts/Bindings/input/ads7846.txt (limited to 'dts/Bindings/input/ads7846.txt') diff --git a/dts/Bindings/input/ads7846.txt b/dts/Bindings/input/ads7846.txt deleted file mode 100644 index 9fc47b006f..0000000000 --- a/dts/Bindings/input/ads7846.txt +++ /dev/null @@ -1,94 +0,0 @@ -Device tree bindings for TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046 -SPI driven touch screen controllers. - -The node for this driver must be a child node of a SPI controller, hence -all mandatory properties described in - - Documentation/devicetree/bindings/spi/spi-bus.txt - -must be specified. - -Additional required properties: - - compatible Must be one of the following, depending on the - model: - "ti,tsc2046" - "ti,ads7843" - "ti,ads7845" - "ti,ads7846" - "ti,ads7873" - - interrupt-parent - interrupts An interrupt node describing the IRQ line the chip's - !PENIRQ pin is connected to. - vcc-supply A regulator node for the supply voltage. - - -Optional properties: - - ti,vref-delay-usecs vref supply delay in usecs, 0 for - external vref (u16). - ti,vref-mv The VREF voltage, in millivolts (u16). - Set to 0 to use internal references - (ADS7846). - ti,keep-vref-on set to keep vref on for differential - measurements as well - ti,swap-xy swap x and y axis - ti,settle-delay-usec Settling time of the analog signals; - a function of Vcc and the capacitance - on the X/Y drivers. If set to non-zero, - two samples are taken with settle_delay - us apart, and the second one is used. - ~150 uSec with 0.01uF caps (u16). - ti,penirq-recheck-delay-usecs If set to non-zero, after samples are - taken this delay is applied and penirq - is rechecked, to help avoid false - events. This value is affected by the - material used to build the touch layer - (u16). - ti,x-plate-ohms Resistance of the X-plate, - in Ohms (u16). - ti,y-plate-ohms Resistance of the Y-plate, - in Ohms (u16). - ti,x-min Minimum value on the X axis (u16). - ti,y-min Minimum value on the Y axis (u16). - ti,x-max Maximum value on the X axis (u16). - ti,y-max Minimum value on the Y axis (u16). - ti,pressure-min Minimum reported pressure value - (threshold) - u16. - ti,pressure-max Maximum reported pressure value (u16). - ti,debounce-max Max number of additional readings per - sample (u16). - ti,debounce-tol Tolerance used for filtering (u16). - ti,debounce-rep Additional consecutive good readings - required after the first two (u16). - ti,pendown-gpio-debounce Platform specific debounce time for the - pendown-gpio (u32). - pendown-gpio GPIO handle describing the pin the !PENIRQ - line is connected to. - wakeup-source use any event on touchscreen as wakeup event. - (Legacy property support: "linux,wakeup") - - -Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC:: - - spi_controller { - tsc2046@0 { - reg = <0>; /* CS0 */ - compatible = "ti,tsc2046"; - interrupt-parent = <&gpio1>; - interrupts = <8 0>; /* BOOT6 / GPIO 8 */ - spi-max-frequency = <1000000>; - pendown-gpio = <&gpio1 8 0>; - vcc-supply = <®_vcc3>; - - ti,x-min = /bits/ 16 <0>; - ti,x-max = /bits/ 16 <8000>; - ti,y-min = /bits/ 16 <0>; - ti,y-max = /bits/ 16 <4800>; - ti,x-plate-ohms = /bits/ 16 <40>; - ti,pressure-max = /bits/ 16 <255>; - - wakeup-source; - }; - }; -- cgit v1.2.3