From abef60363d8ecac66e45853f328afa8eeb9e00fd Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 23 Jun 2020 12:14:59 +0200 Subject: dts: update to v5.8-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/input/elants_i2c.txt | 34 ---------------------------------- 1 file changed, 34 deletions(-) delete mode 100644 dts/Bindings/input/elants_i2c.txt (limited to 'dts/Bindings/input/elants_i2c.txt') diff --git a/dts/Bindings/input/elants_i2c.txt b/dts/Bindings/input/elants_i2c.txt deleted file mode 100644 index 5edac8be08..0000000000 --- a/dts/Bindings/input/elants_i2c.txt +++ /dev/null @@ -1,34 +0,0 @@ -Elantech I2C Touchscreen - -Required properties: -- compatible: must be "elan,ekth3500". -- reg: I2C address of the chip. -- interrupts: interrupt to which the chip is connected (see interrupt - binding[0]). - -Optional properties: -- wakeup-source: touchscreen can be used as a wakeup source. -- pinctrl-names: should be "default" (see pinctrl binding [1]). -- pinctrl-0: a phandle pointing to the pin settings for the device (see - pinctrl binding [1]). -- reset-gpios: reset gpio the chip is connected to. -- vcc33-supply: a phandle for the regulator supplying 3.3V power. -- vccio-supply: a phandle for the regulator supplying IO power. - -[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - -Example: - &i2c1 { - /* ... */ - - touchscreen@10 { - compatible = "elan,ekth3500"; - reg = <0x10>; - interrupt-parent = <&gpio4>; - interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - }; - - /* ... */ - }; -- cgit v1.2.3