From 35f607bc7da71b302fd6bf3d6d48d7ea66df1195 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 11 Sep 2018 08:26:30 +0200 Subject: dts: update to v4.19-rc1 Signed-off-by: Sascha Hauer --- .../input/touchscreen/resistive-adc-touch.txt | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 dts/Bindings/input/touchscreen/resistive-adc-touch.txt (limited to 'dts/Bindings/input/touchscreen/resistive-adc-touch.txt') diff --git a/dts/Bindings/input/touchscreen/resistive-adc-touch.txt b/dts/Bindings/input/touchscreen/resistive-adc-touch.txt new file mode 100644 index 0000000000..51456c0e9a --- /dev/null +++ b/dts/Bindings/input/touchscreen/resistive-adc-touch.txt @@ -0,0 +1,30 @@ +Generic resistive touchscreen ADC + +Required properties: + + - compatible: must be "resistive-adc-touch" +The device must be connected to an ADC device that provides channels for +position measurement and optional pressure. +Refer to ../iio/iio-bindings.txt for details + - iio-channels: must have at least two channels connected to an ADC device. +These should correspond to the channels exposed by the ADC device and should +have the right index as the ADC device registers them. These channels +represent the relative position on the "x" and "y" axes. + - iio-channel-names: must have all the channels' names. Mandatory channels +are "x" and "y". + +Optional properties: + - iio-channels: The third channel named "pressure" is optional and can be +used if the ADC device also measures pressure besides position. +If this channel is missing, pressure will be ignored and the touchscreen +will only report position. + - iio-channel-names: optional channel named "pressure". + +Example: + + resistive_touch: resistive_touch { + compatible = "resistive-adc-touch"; + touchscreen-min-pressure = <50000>; + io-channels = <&adc 24>, <&adc 25>, <&adc 26>; + io-channel-names = "x", "y", "pressure"; + }; -- cgit v1.2.3