From 461f8cfc7ea788428240271818363333ceff5c4c Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 6 May 2015 08:56:43 +0200 Subject: dts: update to v4.1-rc1 Signed-off-by: Sascha Hauer --- .../interrupt-controller/brcm,bcm3380-l2-intc.txt | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 dts/Bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt (limited to 'dts/Bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt') diff --git a/dts/Bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/dts/Bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt new file mode 100644 index 0000000000..8f48aad508 --- /dev/null +++ b/dts/Bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt @@ -0,0 +1,41 @@ +Broadcom BCM3380-style Level 1 / Level 2 interrupt controller + +This interrupt controller shows up in various forms on many BCM338x/BCM63xx +chipsets. It has the following properties: + +- outputs a single interrupt signal to its interrupt controller parent + +- contains one or more enable/status word pairs, which often appear at + different offsets in different blocks + +- no atomic set/clear operations + +Required properties: + +- compatible: should be "brcm,bcm3380-l2-intc" +- reg: specifies one or more enable/status pairs, in the following format: + ... +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- interrupt-parent: specifies the phandle to the parent interrupt controller + this one is cascaded from +- interrupts: specifies the interrupt line in the interrupt-parent controller + node, valid values depend on the type of parent interrupt controller + +Optional properties: + +- brcm,irq-can-wake: if present, this means the L2 controller can be used as a + wakeup source for system suspend/resume. + +Example: + +irq0_intc: interrupt-controller@10000020 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x10000024 0x4 0x1000002c 0x4>, + <0x10000020 0x4 0x10000028 0x4>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpu_intc>; + interrupts = <2>; +}; -- cgit v1.2.3