From 0ff58575c9d66f660886387c2e68d8c5c724e87b Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 3 Feb 2016 10:25:36 +0100 Subject: dts: update to v4.5-rc1 Signed-off-by: Sascha Hauer --- .../interrupt-controller/hisilicon,mbigen-v2.txt | 74 ++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 dts/Bindings/interrupt-controller/hisilicon,mbigen-v2.txt (limited to 'dts/Bindings/interrupt-controller/hisilicon,mbigen-v2.txt') diff --git a/dts/Bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/dts/Bindings/interrupt-controller/hisilicon,mbigen-v2.txt new file mode 100644 index 0000000000..720f7c92e9 --- /dev/null +++ b/dts/Bindings/interrupt-controller/hisilicon,mbigen-v2.txt @@ -0,0 +1,74 @@ +Hisilicon mbigen device tree bindings. +======================================= + +Mbigen means: message based interrupt generator. + +MBI is kind of msi interrupt only used on Non-PCI devices. + +To reduce the wired interrupt number connected to GIC, +Hisilicon designed mbigen to collect and generate interrupt. + + +Non-pci devices can connect to mbigen and generate the +interrupt by writing ITS register. + +The mbigen chip and devices connect to mbigen have the following properties: + +Mbigen main node required properties: +------------------------------------------- +- compatible: Should be "hisilicon,mbigen-v2" + +- reg: Specifies the base physical address and size of the Mbigen + registers. + +- interrupt controller: Identifies the node as an interrupt controller + +- msi-parent: Specifies the MSI controller this mbigen use. + For more detail information,please refer to the generic msi-parent binding in + Documentation/devicetree/bindings/interrupt-controller/msi.txt. + +- num-pins: the total number of pins implemented in this Mbigen + instance. + +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 2. + + The 1st cell is hardware pin number of the interrupt.This number is local to + each mbigen chip and in the range from 0 to the maximum interrupts number + of the mbigen. + + The 2nd cell is the interrupt trigger type. + The value of this cell should be: + 1: rising edge triggered + or + 4: high level triggered + +Examples: + + mbigen_device_gmac:intc { + compatible = "hisilicon,mbigen-v2"; + reg = <0x0 0xc0080000 0x0 0x10000>; + interrupt-controller; + msi-parent = <&its_dsa 0x40b1c>; + num-pins = <9>; + #interrupt-cells = <2>; + }; + +Devices connect to mbigen required properties: +---------------------------------------------------- +-interrupt-parent: Specifies the mbigen device node which device connected. + +-interrupts:Specifies the interrupt source. + For the specific information of each cell in this property,please refer to + the "interrupt-cells" description mentioned above. + +Examples: + gmac0: ethernet@c2080000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0xc2080000 0 0x20000>, + <0 0xc0000000 0 0x1000>; + interrupt-parent = <&mbigen_device_gmac>; + interrupts = <656 1>, + <657 1>; + }; -- cgit v1.2.3