From 00ce25c6dcdae5582ae4be37147ab33678adc995 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 25 Apr 2014 11:22:32 +0200 Subject: Add devicetree source files as of Linux-3.15-rc2 This adds the Linux dts files to barebox. The dts files are generated from Ian Campbells device-tree-rebasing.git: git://xenbits.xen.org/people/ianc/device-tree-rebasing.git The dts are found in dts/ in the barebox repository and will be updated from upstream regularly, probably for each upstream -rc. To keep the synchronization with upstream easy no changes to the original files are allowed under dts/. Instead changes to upstream dts files will be done using overlays in arch/$ARCH/dts/. Signed-off-by: Sascha Hauer --- dts/Bindings/interrupt-controller/lsi,zevio-intc.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 dts/Bindings/interrupt-controller/lsi,zevio-intc.txt (limited to 'dts/Bindings/interrupt-controller/lsi,zevio-intc.txt') diff --git a/dts/Bindings/interrupt-controller/lsi,zevio-intc.txt b/dts/Bindings/interrupt-controller/lsi,zevio-intc.txt new file mode 100644 index 0000000..aee38e7 --- /dev/null +++ b/dts/Bindings/interrupt-controller/lsi,zevio-intc.txt @@ -0,0 +1,18 @@ +TI-NSPIRE interrupt controller + +Required properties: +- compatible: Compatible property value should be "lsi,zevio-intc". + +- reg: Physical base address of the controller and length of memory mapped + region. + +- interrupt-controller : Identifies the node as an interrupt controller + +Example: + +interrupt-controller { + compatible = "lsi,zevio-intc"; + interrupt-controller; + reg = <0xDC000000 0x1000>; + #interrupt-cells = <1>; +}; -- cgit v1.1