From 461f8cfc7ea788428240271818363333ceff5c4c Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 6 May 2015 08:56:43 +0200 Subject: dts: update to v4.1-rc1 Signed-off-by: Sascha Hauer --- .../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 dts/Bindings/interrupt-controller/ti,omap4-wugen-mpu (limited to 'dts/Bindings/interrupt-controller/ti,omap4-wugen-mpu') diff --git a/dts/Bindings/interrupt-controller/ti,omap4-wugen-mpu b/dts/Bindings/interrupt-controller/ti,omap4-wugen-mpu new file mode 100644 index 0000000000..43effa0a4f --- /dev/null +++ b/dts/Bindings/interrupt-controller/ti,omap4-wugen-mpu @@ -0,0 +1,33 @@ +TI OMAP4 Wake-up Generator + +All TI OMAP4/5 (and their derivatives) an interrupt controller that +routes interrupts to the GIC, and also serves as a wakeup source. It +is also referred to as "WUGEN-MPU", hence the name of the binding. + +Reguired properties: + +- compatible : should contain at least "ti,omap4-wugen-mpu" or + "ti,omap5-wugen-mpu" +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 3. +- interrupt-parent : a phandle to the GIC these interrupts are routed + to. + +Notes: + +- Because this HW ultimately routes interrupts to the GIC, the + interrupt specifier must be that of the GIC. +- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs + are explicitly forbiden. + +Example: + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48281000 0x1000>; + interrupt-parent = <&gic>; + }; -- cgit v1.2.3