From 81ce4a7dec8ba066c73692e10634091b14c1e494 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Feb 2020 09:05:53 +0100 Subject: dts: update to v5.6-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/leds/leds-gpio.txt | 75 ----------------------------------------- 1 file changed, 75 deletions(-) delete mode 100644 dts/Bindings/leds/leds-gpio.txt (limited to 'dts/Bindings/leds/leds-gpio.txt') diff --git a/dts/Bindings/leds/leds-gpio.txt b/dts/Bindings/leds/leds-gpio.txt deleted file mode 100644 index d21281b63d..0000000000 --- a/dts/Bindings/leds/leds-gpio.txt +++ /dev/null @@ -1,75 +0,0 @@ -LEDs connected to GPIO lines - -Required properties: -- compatible : should be "gpio-leds". - -Each LED is represented as a sub-node of the gpio-leds device. Each -node's name represents the name of the corresponding LED. - -LED sub-node properties: -- gpios : Should specify the LED's GPIO, see "gpios property" in - Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs should be - indicated using flags in the GPIO specifier. -- function : (optional) - see Documentation/devicetree/bindings/leds/common.txt -- color : (optional) - see Documentation/devicetree/bindings/leds/common.txt -- label : (optional) - see Documentation/devicetree/bindings/leds/common.txt (deprecated) -- linux,default-trigger : (optional) - see Documentation/devicetree/bindings/leds/common.txt -- default-state: (optional) The initial state of the LED. - see Documentation/devicetree/bindings/leds/common.txt -- retain-state-suspended: (optional) The suspend state can be retained.Such - as charge-led gpio. -- retain-state-shutdown: (optional) Retain the state of the LED on shutdown. - Useful in BMC systems, for example when the BMC is rebooted while the host - remains up. -- panic-indicator : (optional) - see Documentation/devicetree/bindings/leds/common.txt - -Examples: - -#include -#include - -leds { - compatible = "gpio-leds"; - led0 { - gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "disk-activity"; - function = LED_FUNCTION_DISK; - }; - - led1 { - gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>; - /* Keep LED on if BIOS detected hardware fault */ - default-state = "keep"; - function = LED_FUNCTION_FAULT; - }; -}; - -run-control { - compatible = "gpio-leds"; - led0 { - gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>; - color = ; - default-state = "off"; - }; - led1 { - gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>; - color = ; - default-state = "on"; - }; -}; - -leds { - compatible = "gpio-leds"; - - led0 { - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "max8903-charger-charging"; - retain-state-suspended; - function = LED_FUNCTION_CHARGE; - }; -}; -- cgit v1.2.3