From a05d5c206c91b17eb13ab9631d93e0a9b6fb92f8 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 8 Dec 2015 07:33:36 +0100 Subject: dts: update to v4.3-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/leds/leds-ns2.txt | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'dts/Bindings/leds/leds-ns2.txt') diff --git a/dts/Bindings/leds/leds-ns2.txt b/dts/Bindings/leds/leds-ns2.txt index aef3aca34d..9f81258a5b 100644 --- a/dts/Bindings/leds/leds-ns2.txt +++ b/dts/Bindings/leds/leds-ns2.txt @@ -8,6 +8,9 @@ Each LED is represented as a sub-node of the ns2-leds device. Required sub-node properties: - cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification. - slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification. +- modes-map: A mapping between LED modes (off, on or SATA activity blinking) and + the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations + should be given in order to avoid having an unknown mode at driver probe time. Optional sub-node properties: - label: Name for this LED. If omitted, the label is taken from the node name. @@ -15,6 +18,8 @@ Optional sub-node properties: Example: +#include + ns2-leds { compatible = "lacie,ns2-leds"; @@ -22,5 +27,9 @@ ns2-leds { label = "ns2:blue:sata"; slow-gpio = <&gpio0 29 0>; cmd-gpio = <&gpio0 30 0>; + modes-map = ; }; }; -- cgit v1.2.3