From a595ff6eea05b919567f96d71e7e2c7b6236b8ac Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 1 Sep 2014 09:47:17 +0200 Subject: dts: update to v3.17-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/leds/pca963x.txt | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'dts/Bindings/leds/pca963x.txt') diff --git a/dts/Bindings/leds/pca963x.txt b/dts/Bindings/leds/pca963x.txt index aece3eac1b..dafbe9931c 100644 --- a/dts/Bindings/leds/pca963x.txt +++ b/dts/Bindings/leds/pca963x.txt @@ -1,18 +1,19 @@ LEDs connected to pca9632, pca9633 or pca9634 Required properties: -- compatible : should be : "nxp,pca9632", "nxp,pca9633" or "nxp,pca9634" +- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635" Optional properties: -- nxp,totem-pole : use totem pole (push-pull) instead of default open-drain +- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults + to open-drain, newer chips to totem pole) - nxp,hw-blink : use hardware blinking instead of software blinking Each led is represented as a sub-node of the nxp,pca963x device. LED sub-node properties: - label : (optional) see Documentation/devicetree/bindings/leds/common.txt -- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633 - or 0 to 7 in pca9634) +- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633, + 0 to 7 in pca9634, or 0 to 15 in pca9635) - linux,default-trigger : (optional) see Documentation/devicetree/bindings/leds/common.txt -- cgit v1.2.3