From bb2de9a333d17bb1b048ad208002501226b83f03 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 6 Jun 2017 08:07:28 +0200 Subject: dts: update to v4.12-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/media/i2c/ov2640.txt | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) (limited to 'dts/Bindings/media/i2c/ov2640.txt') diff --git a/dts/Bindings/media/i2c/ov2640.txt b/dts/Bindings/media/i2c/ov2640.txt index c429b5bdca..989ce6cb6a 100644 --- a/dts/Bindings/media/i2c/ov2640.txt +++ b/dts/Bindings/media/i2c/ov2640.txt @@ -1,8 +1,8 @@ * Omnivision OV2640 CMOS sensor -The Omnivision OV2640 sensor support multiple resolutions output, such as -CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB -output format. +The Omnivision OV2640 sensor supports multiple resolutions output, such as +CIF, SVGA, UXGA. It also can support the YUV422/420, RGB565/555 or raw RGB +output formats. Required Properties: - compatible: should be "ovti,ov2640" @@ -20,26 +20,21 @@ Documentation/devicetree/bindings/media/video-interfaces.txt. Example: i2c1: i2c@f0018000 { - ov2640: camera@0x30 { + ov2640: camera@30 { compatible = "ovti,ov2640"; reg = <0x30>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck1 &pinctrl_ov2640_pwdn &pinctrl_ov2640_resetb>; - - resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; - pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; - - clocks = <&pck1>; + pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioE 11 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>; + clocks = <&pck0>; clock-names = "xvclk"; - - assigned-clocks = <&pck1>; + assigned-clocks = <&pck0>; assigned-clock-rates = <25000000>; port { ov2640_0: endpoint { remote-endpoint = <&isi_0>; - bus-width = <8>; }; }; }; -- cgit v1.2.3