From a9c5f6b9ec883ee9dafd6d393600acc6fd263043 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 27 Feb 2018 09:40:19 +0100 Subject: dts: update to v4.16-rc1 Also includeded: ARM: dts: am33xx: do not delete no longer existing clocks Several clocks are removed from the am33xx dts files with v4.16-rc1. Remove the corresponding /delete-node/ directives aswell to avoid dtc breakage. Also included: ARM: dts: imx6qdl: SolidRun: Fix upstream include Upstream dts file way renamed, so change include name accordingly. Signed-off-by: Sascha Hauer --- dts/Bindings/media/i2c/ov5640.txt | 46 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 44 insertions(+), 2 deletions(-) (limited to 'dts/Bindings/media/i2c/ov5640.txt') diff --git a/dts/Bindings/media/i2c/ov5640.txt b/dts/Bindings/media/i2c/ov5640.txt index 540b36c4b1..8e36da0d84 100644 --- a/dts/Bindings/media/i2c/ov5640.txt +++ b/dts/Bindings/media/i2c/ov5640.txt @@ -1,4 +1,4 @@ -* Omnivision OV5640 MIPI CSI-2 sensor +* Omnivision OV5640 MIPI CSI-2 / parallel sensor Required Properties: - compatible: should be "ovti,ov5640" @@ -18,7 +18,25 @@ The device node must contain one 'port' child node for its digital output video port, in accordance with the video interface bindings defined in Documentation/devicetree/bindings/media/video-interfaces.txt. -Example: +OV5640 can be connected to a MIPI CSI-2 bus or a parallel bus endpoint. + +Endpoint node required properties for CSI-2 connection are: +- remote-endpoint: a phandle to the bus receiver's endpoint node. +- clock-lanes: should be set to <0> (clock lane on hardware lane 0) +- data-lanes: should be set to <1> or <1 2> (one or two CSI-2 lanes supported) + +Endpoint node required properties for parallel connection are: +- remote-endpoint: a phandle to the bus receiver's endpoint node. +- bus-width: shall be set to <8> for 8 bits parallel bus + or <10> for 10 bits parallel bus +- data-shift: shall be set to <2> for 8 bits parallel bus + (lines 9:2 are used) or <0> for 10 bits parallel bus +- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. +- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. +- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock + signal. + +Examples: &i2c1 { ov5640: camera@3c { @@ -35,6 +53,7 @@ Example: reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; port { + /* MIPI CSI-2 bus endpoint */ ov5640_to_mipi_csi2: endpoint { remote-endpoint = <&mipi_csi2_from_ov5640>; clock-lanes = <0>; @@ -43,3 +62,26 @@ Example: }; }; }; + +&i2c1 { + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clk_ext_camera>; + clock-names = "xclk"; + + port { + /* Parallel bus endpoint */ + ov5640_to_parallel: endpoint { + remote-endpoint = <¶llel_from_ov5640>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + }; +}; -- cgit v1.2.3