From 6b85c20d46812bdbc062b863261c3e5100e30556 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 8 May 2018 08:14:56 +0200 Subject: dts: update to v4.17-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/media/i2c/ov5695.txt | 41 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 dts/Bindings/media/i2c/ov5695.txt (limited to 'dts/Bindings/media/i2c/ov5695.txt') diff --git a/dts/Bindings/media/i2c/ov5695.txt b/dts/Bindings/media/i2c/ov5695.txt new file mode 100644 index 0000000000..640a63717d --- /dev/null +++ b/dts/Bindings/media/i2c/ov5695.txt @@ -0,0 +1,41 @@ +* Omnivision OV5695 MIPI CSI-2 sensor + +Required Properties: +- compatible: shall be "ovti,ov5695" +- clocks: reference to the xvclk input clock +- clock-names: shall be "xvclk" +- avdd-supply: Analog voltage supply, 2.8 volts +- dovdd-supply: Digital I/O voltage supply, 1.8 volts +- dvdd-supply: Digital core voltage supply, 1.2 volts +- reset-gpios: Low active reset gpio + +The device node shall contain one 'port' child node with an +'endpoint' subnode for its digital output video port, +in accordance with the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. +The endpoint optional property 'data-lanes' shall be "<1 2>". + +Example: +&i2c7 { + ov5695: camera-sensor@36 { + compatible = "ovti,ov5695"; + reg = <0x36>; + pinctrl-names = "default"; + pinctrl-0 = <&clk_24m_cam>; + + clocks = <&cru SCLK_TESTCLKOUT1>; + clock-names = "xvclk"; + + avdd-supply = <&pp2800_cam>; + dovdd-supply = <&pp1800>; + dvdd-supply = <&pp1250_cam>; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + + port { + wcam_out: endpoint { + remote-endpoint = <&mipi_in_wcam>; + data-lanes = <1 2>; + }; + }; + }; +}; -- cgit v1.2.3