From 5f3e773ca4830daf71c7b5eee0c6b1dfe4d09c08 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 27 Jan 2022 11:22:53 +0100 Subject: dts: update to v5.17-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/mfd/rohm,bd70528-pmic.txt | 102 --------------------------------- 1 file changed, 102 deletions(-) delete mode 100644 dts/Bindings/mfd/rohm,bd70528-pmic.txt (limited to 'dts/Bindings/mfd/rohm,bd70528-pmic.txt') diff --git a/dts/Bindings/mfd/rohm,bd70528-pmic.txt b/dts/Bindings/mfd/rohm,bd70528-pmic.txt deleted file mode 100644 index 386eec06cf..0000000000 --- a/dts/Bindings/mfd/rohm,bd70528-pmic.txt +++ /dev/null @@ -1,102 +0,0 @@ -* ROHM BD70528 Power Management Integrated Circuit bindings - -BD70528MWV is an ultra-low quiescent current general purpose, single-chip, -power management IC for battery-powered portable devices. The IC -integrates 3 ultra-low current consumption buck converters, 3 LDOs and 2 -LED Drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz -clock gate, high-accuracy VREF for use with an external ADC, flexible -dual-input power path, 10 bit SAR ADC for battery temperature monitor and -1S battery charger with scalable charge currents. - -Required properties: - - compatible : Should be "rohm,bd70528" - - reg : I2C slave address. - - interrupts : The interrupt line the device is connected to. - - interrupt-controller : To indicate BD70528 acts as an interrupt controller. - - #interrupt-cells : Should be 2. Usage is compliant to the 2 cells - variant of ../interrupt-controller/interrupts.txt - - gpio-controller : To indicate BD70528 acts as a GPIO controller. - - #gpio-cells : Should be 2. The first cell is the pin number and - the second cell is used to specify flags. See - ../gpio/gpio.txt for more information. - - #clock-cells : Should be 0. - - regulators: : List of child nodes that specify the regulators. - Please see ../regulator/rohm,bd70528-regulator.txt - -Optional properties: - - clock-output-names : Should contain name for output clock. - -Example: -/* External oscillator */ -osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <1>; - clock-frequency = <32768>; - clock-output-names = "osc"; -}; - -pmic: pmic@4b { - compatible = "rohm,bd70528"; - reg = <0x4b>; - interrupt-parent = <&gpio1>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; - clocks = <&osc 0>; - #clock-cells = <0>; - clock-output-names = "bd70528-32k-out"; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - - regulators { - buck1: BUCK1 { - regulator-name = "buck1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3400000>; - regulator-boot-on; - regulator-ramp-delay = <125>; - }; - buck2: BUCK2 { - regulator-name = "buck2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-ramp-delay = <125>; - }; - buck3: BUCK3 { - regulator-name = "buck3"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-ramp-delay = <250>; - }; - ldo1: LDO1 { - regulator-name = "ldo1"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - ldo2: LDO2 { - regulator-name = "ldo2"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - ldo3: LDO3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <3300000>; - }; - led_ldo1: LED_LDO1 { - regulator-name = "led_ldo1"; - regulator-min-microvolt = <200000>; - regulator-max-microvolt = <300000>; - }; - led_ldo2: LED_LDO2 { - regulator-name = "led_ldo2"; - regulator-min-microvolt = <200000>; - regulator-max-microvolt = <300000>; - }; - }; -}; -- cgit v1.2.3