From 35f607bc7da71b302fd6bf3d6d48d7ea66df1195 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 11 Sep 2018 08:26:30 +0200 Subject: dts: update to v4.19-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/mfd/ac100.txt | 4 -- dts/Bindings/mfd/altera-a10sr.txt | 1 - dts/Bindings/mfd/arizona.txt | 1 - dts/Bindings/mfd/as3722.txt | 2 + dts/Bindings/mfd/axp20x.txt | 8 ++- dts/Bindings/mfd/bd9571mwv.txt | 1 - dts/Bindings/mfd/bfticu.txt | 1 - dts/Bindings/mfd/da9055.txt | 2 - dts/Bindings/mfd/da9062.txt | 2 - dts/Bindings/mfd/da9063.txt | 2 - dts/Bindings/mfd/da9150.txt | 2 - dts/Bindings/mfd/madera.txt | 102 +++++++++++++++++++++++++++++++++ dts/Bindings/mfd/max14577.txt | 1 - dts/Bindings/mfd/max77686.txt | 1 - dts/Bindings/mfd/max77693.txt | 1 - dts/Bindings/mfd/max77802.txt | 1 - dts/Bindings/mfd/max8998.txt | 2 - dts/Bindings/mfd/motorola-cpcap.txt | 1 - dts/Bindings/mfd/palmas.txt | 1 - dts/Bindings/mfd/retu.txt | 1 - dts/Bindings/mfd/rk808.txt | 1 - dts/Bindings/mfd/rohm,bd71837-pmic.txt | 62 ++++++++++++++++++++ dts/Bindings/mfd/samsung,sec-core.txt | 2 - dts/Bindings/mfd/stmpe.txt | 1 - dts/Bindings/mfd/tc3589x.txt | 1 - dts/Bindings/mfd/tps65086.txt | 1 - dts/Bindings/mfd/tps65910.txt | 2 +- dts/Bindings/mfd/tps65912.txt | 1 - dts/Bindings/mfd/twl-familly.txt | 1 - dts/Bindings/mfd/twl6040.txt | 1 - dts/Bindings/mfd/wm831x.txt | 1 - 31 files changed, 172 insertions(+), 39 deletions(-) create mode 100644 dts/Bindings/mfd/madera.txt create mode 100644 dts/Bindings/mfd/rohm,bd71837-pmic.txt (limited to 'dts/Bindings/mfd') diff --git a/dts/Bindings/mfd/ac100.txt b/dts/Bindings/mfd/ac100.txt index b8ef006675..dff219f074 100644 --- a/dts/Bindings/mfd/ac100.txt +++ b/dts/Bindings/mfd/ac100.txt @@ -10,7 +10,6 @@ Required properties: - sub-nodes: - codec - compatible: "x-powers,ac100-codec" - - interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the IRQ_AUDIO pin - #clock-cells: Shall be 0 @@ -20,9 +19,6 @@ Required properties: - rtc - compatible: "x-powers,ac100-rtc" - - interrupt-parent: The parent interrupt controller - - interrupts: SoC NMI / GPIO interrupt connected to the - IRQ_RTC pin - clocks: A phandle to the codec's "4M_adda" clock - #clock-cells: Shall be 1 - clock-output-names: "cko1_rtc", "cko2_rtc", "cko3_rtc" diff --git a/dts/Bindings/mfd/altera-a10sr.txt b/dts/Bindings/mfd/altera-a10sr.txt index c8a736554b..a688520dd8 100644 --- a/dts/Bindings/mfd/altera-a10sr.txt +++ b/dts/Bindings/mfd/altera-a10sr.txt @@ -5,7 +5,6 @@ Required parent device properties: - spi-max-frequency : Maximum SPI frequency. - reg : The SPI Chip Select address for the Arria10 System Resource chip -- interrupt-parent : The parent interrupt controller. - interrupts : The interrupt line the device is connected to. - interrupt-controller : Marks the device node as an interrupt controller. - #interrupt-cells : The number of cells to describe an IRQ, should be 2. diff --git a/dts/Bindings/mfd/arizona.txt b/dts/Bindings/mfd/arizona.txt index a014afb079..9b62831fdf 100644 --- a/dts/Bindings/mfd/arizona.txt +++ b/dts/Bindings/mfd/arizona.txt @@ -22,7 +22,6 @@ Required properties: connected to. - interrupt-controller : Arizona class devices contain interrupt controllers and may provide interrupt services to other devices. - - interrupt-parent : The parent interrupt controller. - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from diff --git a/dts/Bindings/mfd/as3722.txt b/dts/Bindings/mfd/as3722.txt index 5297b22107..2a665741d7 100644 --- a/dts/Bindings/mfd/as3722.txt +++ b/dts/Bindings/mfd/as3722.txt @@ -20,6 +20,8 @@ Optional properties: - ams,enable-internal-i2c-pullup: Boolean property, to enable internal pullup on i2c scl/sda pins. Missing this will disable internal pullup on i2c scl/sda lines. +- ams,enable-ac-ok-power-on: Boolean property, to enable exit out of power off + mode with AC_OK pin (pin enabled in power off mode). Optional submodule and their properties: ======================================= diff --git a/dts/Bindings/mfd/axp20x.txt b/dts/Bindings/mfd/axp20x.txt index d1762f3b30..188f0373d4 100644 --- a/dts/Bindings/mfd/axp20x.txt +++ b/dts/Bindings/mfd/axp20x.txt @@ -28,7 +28,6 @@ Required properties: * "x-powers,axp809" * "x-powers,axp813" - reg: The I2C slave address or RSB hardware address for the AXP chip -- interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin - interrupt-controller: The PMIC has its own internal IRQs - #interrupt-cells: Should be set to 1 @@ -45,8 +44,11 @@ Optional properties: board is driving OTG VBus or not. (axp221 / axp223 / axp803/ axp813 only) -- x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is - wired for master mode. The default is slave mode. +- x-powers,self-working-mode and + x-powers,master-mode: Boolean (axp806 only). Set either of these when the + PMIC is wired for self-working mode or master mode. + If neither is set then slave mode is assumed. + This corresponds to how the MODESET pin is wired. - -supply: a phandle to the regulator supply node. May be omitted if inputs are unregulated, such as using the IPSOUT output diff --git a/dts/Bindings/mfd/bd9571mwv.txt b/dts/Bindings/mfd/bd9571mwv.txt index 25d1f697eb..8c4678650d 100644 --- a/dts/Bindings/mfd/bd9571mwv.txt +++ b/dts/Bindings/mfd/bd9571mwv.txt @@ -3,7 +3,6 @@ Required properties: - compatible : Should be "rohm,bd9571mwv". - reg : I2C slave address. - - interrupt-parent : Phandle to the parent interrupt controller. - interrupts : The interrupt line the device is connected to. - interrupt-controller : Marks the device node as an interrupt controller. - #interrupt-cells : The number of cells to describe an IRQ, should be 2. diff --git a/dts/Bindings/mfd/bfticu.txt b/dts/Bindings/mfd/bfticu.txt index 65c90776c6..538192fda9 100644 --- a/dts/Bindings/mfd/bfticu.txt +++ b/dts/Bindings/mfd/bfticu.txt @@ -10,7 +10,6 @@ Required properties: - interrupts: the main IRQ line to signal the collected IRQs - #interrupt-cells : is 2 and their usage is compliant to the 2 cells variant of Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -- interrupt-parent: the parent IRQ ctrl the main IRQ is connected to - reg: access on the parent local bus (chip select, offset in chip select, size) Example: diff --git a/dts/Bindings/mfd/da9055.txt b/dts/Bindings/mfd/da9055.txt index 6dab34d34f..131a53283e 100644 --- a/dts/Bindings/mfd/da9055.txt +++ b/dts/Bindings/mfd/da9055.txt @@ -22,8 +22,6 @@ Documentation/devicetree/bindings/sound/da9055.txt Required properties: - compatible : Should be "dlg,da9055-pmic" - reg: Specifies the I2C slave address (defaults to 0x5a but can be modified) -- interrupt-parent: Specifies the phandle of the interrupt controller to which - the IRQs from da9055 are delivered to. - interrupts: IRQ line info for da9055 chip. - interrupt-controller: da9055 has internal IRQs (has own IRQ domain). - #interrupt-cells: Should be 1, is the local IRQ number for da9055. diff --git a/dts/Bindings/mfd/da9062.txt b/dts/Bindings/mfd/da9062.txt index c0a418c27e..edca653a57 100644 --- a/dts/Bindings/mfd/da9062.txt +++ b/dts/Bindings/mfd/da9062.txt @@ -32,8 +32,6 @@ Required properties: "dlg,da9061" for DA9061 - reg : Specifies the I2C slave address (this defaults to 0x58 but it can be modified to match the chip's OTP settings). -- interrupt-parent : Specifies the reference to the interrupt controller for - the DA9062 or DA9061. - interrupts : IRQ line information. - interrupt-controller diff --git a/dts/Bindings/mfd/da9063.txt b/dts/Bindings/mfd/da9063.txt index 443e682869..8da879935c 100644 --- a/dts/Bindings/mfd/da9063.txt +++ b/dts/Bindings/mfd/da9063.txt @@ -16,8 +16,6 @@ Required properties: - compatible : Should be "dlg,da9063" or "dlg,da9063l" - reg : Specifies the I2C slave address (this defaults to 0x58 but it can be modified to match the chip's OTP settings). -- interrupt-parent : Specifies the reference to the interrupt controller for - the DA9063. - interrupts : IRQ line information. - interrupt-controller diff --git a/dts/Bindings/mfd/da9150.txt b/dts/Bindings/mfd/da9150.txt index fd4dca7f4a..f09b41fbdf 100644 --- a/dts/Bindings/mfd/da9150.txt +++ b/dts/Bindings/mfd/da9150.txt @@ -13,8 +13,6 @@ da9150-fg : Battery Fuel-Gauge Required properties: - compatible : Should be "dlg,da9150" - reg: Specifies the I2C slave address -- interrupt-parent: Specifies the phandle of the interrupt controller to which - the IRQs from da9150 are delivered to. - interrupts: IRQ line info for da9150 chip. - interrupt-controller: da9150 has internal IRQs (own IRQ domain). (See ../interrupt-controller/interrupts.txt for diff --git a/dts/Bindings/mfd/madera.txt b/dts/Bindings/mfd/madera.txt new file mode 100644 index 0000000000..db32660883 --- /dev/null +++ b/dts/Bindings/mfd/madera.txt @@ -0,0 +1,102 @@ +Cirrus Logic Madera class audio codecs Multi-Functional Device + +These devices are audio SoCs with extensive digital capabilities and a range +of analogue I/O. + +See also the child driver bindings in: +bindings/pinctrl/cirrus,madera-pinctrl.txt +bindings/regulator/arizona-regulator.txt +bindings/sound/madera.txt + +Required properties: + + - compatible : One of the following chip-specific strings: + "cirrus,cs47l35" + "cirrus,cs47l85" + "cirrus,cs47l90" + "cirrus,cs47l91" + "cirrus,wm1840" + + - reg : I2C slave address when connected using I2C, chip select number when + using SPI. + + - DCVDD-supply : Power supply for the device as defined in + bindings/regulator/regulator.txt + Mandatory on CS47L35, CS47L90, CS47L91 + Optional on CS47L85, WM1840 + + - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply : + Power supplies for the device + + - DBVDD3-supply, DBVDD4-supply : Power supplies for the device + (CS47L85, CS47L90, CS47L91, WM1840) + + - SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device + (CS47L85, WM1840) + + - SPKVDD-supply : Power supply for the device + (CS47L35) + + - interrupt-controller : Indicates that this device is an interrupt controller + + - #interrupt-cells: the number of cells to describe an IRQ, must be 2. + The first cell is the IRQ number. + The second cell is the flags, encoded as the trigger masks from + bindings/interrupt-controller/interrupts.txt + + - gpio-controller : Indicates this device is a GPIO controller. + + - #gpio-cells : Must be 2. The first cell is the pin number. The second cell + is reserved for future use and must be zero + + - interrupt-parent : The parent interrupt controller. + + - interrupts : The interrupt line the /IRQ signal for the device is + connected to. + +Optional properties: + + - MICVDD-supply : Power supply, only need to be specified if + powered externally + + - reset-gpios : One entry specifying the GPIO controlling /RESET. + As defined in bindings/gpio.txt. + Although optional, it is strongly recommended to use a hardware reset + + - MICBIASx : Initial data for the MICBIAS regulators, as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...) + (all codecs) + + One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...) + (all except CS47L85, WM1840) + + The following following additional property is supported for the generator + nodes: + - cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling + capacitors attached. + +Optional child nodes: + micvdd : Node containing initialization data for the micvdd regulator + See bindings/regulator/arizona-regulator.txt + + ldo1 : Node containing initialization data for the LDO1 regulator + See bindings/regulator/arizona-regulator.txt + (cs47l85, wm1840) + +Example: + +cs47l85@0 { + compatible = "cirrus,cs47l85"; + reg = <0>; + + reset-gpios = <&gpio 0>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <&host_irq1>; + interrupt-parent = <&gic>; + + gpio-controller; + #gpio-cells = <2>; +}; diff --git a/dts/Bindings/mfd/max14577.txt b/dts/Bindings/mfd/max14577.txt index 236264c10b..fc6f0f4e8b 100644 --- a/dts/Bindings/mfd/max14577.txt +++ b/dts/Bindings/mfd/max14577.txt @@ -11,7 +11,6 @@ Required properties: - compatible : Must be "maxim,max14577" or "maxim,max77836". - reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836) - interrupts : IRQ line for the chip. -- interrupt-parent : The parent interrupt controller. Required nodes: diff --git a/dts/Bindings/mfd/max77686.txt b/dts/Bindings/mfd/max77686.txt index 0f2587fa42..42968b7144 100644 --- a/dts/Bindings/mfd/max77686.txt +++ b/dts/Bindings/mfd/max77686.txt @@ -15,7 +15,6 @@ Required properties: - compatible : Must be "maxim,max77686"; - reg : Specifies the i2c slave address of PMIC block. - interrupts : This i2c device has an IRQ line connected to the main SoC. -- interrupt-parent : The parent interrupt controller. Example: diff --git a/dts/Bindings/mfd/max77693.txt b/dts/Bindings/mfd/max77693.txt index e6754974a7..a3c60a7a3b 100644 --- a/dts/Bindings/mfd/max77693.txt +++ b/dts/Bindings/mfd/max77693.txt @@ -14,7 +14,6 @@ Required properties: - compatible : Must be "maxim,max77693". - reg : Specifies the i2c slave address of PMIC block. - interrupts : This i2c device has an IRQ line connected to the main SoC. -- interrupt-parent : The parent interrupt controller. Optional properties: - regulators : The regulators of max77693 have to be instantiated under subnode diff --git a/dts/Bindings/mfd/max77802.txt b/dts/Bindings/mfd/max77802.txt index f2f3fe7590..09decac20d 100644 --- a/dts/Bindings/mfd/max77802.txt +++ b/dts/Bindings/mfd/max77802.txt @@ -14,7 +14,6 @@ Required properties: - compatible : Must be "maxim,max77802" - reg : Specifies the I2C slave address of PMIC block. - interrupts : I2C device IRQ line connected to the main SoC. -- interrupt-parent : The parent interrupt controller. Example: diff --git a/dts/Bindings/mfd/max8998.txt b/dts/Bindings/mfd/max8998.txt index 23a3650ff2..5f2f07c09c 100644 --- a/dts/Bindings/mfd/max8998.txt +++ b/dts/Bindings/mfd/max8998.txt @@ -20,8 +20,6 @@ Required properties: - reg: Specifies the i2c slave address of the pmic block. It should be 0x66. Optional properties: -- interrupt-parent: Specifies the phandle of the interrupt controller to which - the interrupts from MAX8998 are routed to. - interrupts: Interrupt specifiers for two interrupt sources. - First interrupt specifier is for main interrupt. - Second interrupt specifier is for power-on/-off interrupt. diff --git a/dts/Bindings/mfd/motorola-cpcap.txt b/dts/Bindings/mfd/motorola-cpcap.txt index c639705a98..5ddcc8f4fe 100644 --- a/dts/Bindings/mfd/motorola-cpcap.txt +++ b/dts/Bindings/mfd/motorola-cpcap.txt @@ -3,7 +3,6 @@ Motorola CPCAP PMIC device tree binding Required properties: - compatible : One or both of "motorola,cpcap" or "ste,6556002" - reg : SPI chip select -- interrupt-parent : The parent interrupt controller - interrupts : The interrupt line the device is connected to - interrupt-controller : Marks the device node as an interrupt controller - #interrupt-cells : The number of cells to describe an IRQ, should be 2 diff --git a/dts/Bindings/mfd/palmas.txt b/dts/Bindings/mfd/palmas.txt index 8ae1a32bfb..e736ab3012 100644 --- a/dts/Bindings/mfd/palmas.txt +++ b/dts/Bindings/mfd/palmas.txt @@ -25,7 +25,6 @@ and also the generic series names The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -- interrupt-parent : The parent interrupt controller. Optional properties: ti,mux-padX : set the pad register X (1-2) to the correct muxing for the diff --git a/dts/Bindings/mfd/retu.txt b/dts/Bindings/mfd/retu.txt index 876242394a..df3005dd3e 100644 --- a/dts/Bindings/mfd/retu.txt +++ b/dts/Bindings/mfd/retu.txt @@ -9,7 +9,6 @@ Required properties: - compatible: "nokia,retu" or "nokia,tahvo" - reg: Specifies the CBUS slave address of the ASIC chip - interrupts: The interrupt line the device is connected to -- interrupt-parent: The parent interrupt controller Example: diff --git a/dts/Bindings/mfd/rk808.txt b/dts/Bindings/mfd/rk808.txt index 91b65227af..1683ec3245 100644 --- a/dts/Bindings/mfd/rk808.txt +++ b/dts/Bindings/mfd/rk808.txt @@ -10,7 +10,6 @@ Required properties: - compatible: "rockchip,rk808" - compatible: "rockchip,rk818" - reg: I2C slave address -- interrupt-parent: The parent interrupt controller. - interrupts: the interrupt outputs of the controller. - #clock-cells: from common clock binding; shall be set to 1 (multiple clock outputs). See for clock IDs. diff --git a/dts/Bindings/mfd/rohm,bd71837-pmic.txt b/dts/Bindings/mfd/rohm,bd71837-pmic.txt new file mode 100644 index 0000000000..3ca56fdb5f --- /dev/null +++ b/dts/Bindings/mfd/rohm,bd71837-pmic.txt @@ -0,0 +1,62 @@ +* ROHM BD71837 Power Management Integrated Circuit bindings + +BD71837MWV is a programmable Power Management IC for powering single-core, +dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is optimized for +low BOM cost and compact solution footprint. It integrates 8 Buck +egulators and 7 LDOs to provide all the power rails required by the SoC and +the commonly used peripherals. + +Datasheet for PMIC is available at: +https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e + +Required properties: + - compatible : Should be "rohm,bd71837". + - reg : I2C slave address. + - interrupt-parent : Phandle to the parent interrupt controller. + - interrupts : The interrupt line the device is connected to. + - clocks : The parent clock connected to PMIC. If this is missing + 32768 KHz clock is assumed. + - #clock-cells : Should be 0. + - regulators: : List of child nodes that specify the regulators. + Please see ../regulator/rohm,bd71837-regulator.txt + +Optional properties: +- clock-output-names : Should contain name for output clock. + +Example: + + /* external oscillator node */ + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <32768>; + clock-output-names = "osc"; + }; + + pmic: pmic@4b { + compatible = "rohm,bd71837"; + reg = <0x4b>; + interrupt-parent = <&gpio1>; + interrupts = <29 GPIO_ACTIVE_LOW>; + interrupt-names = "irq"; + #clock-cells = <0>; + clocks = <&osc 0>; + clock-output-names = "bd71837-32k-out"; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + }; + }; + }; + + /* Clock consumer node */ + rtc@0 { + compatible = "company,my-rtc"; + clock-names = "my-clock"; + clocks = <&pmic>; + }; diff --git a/dts/Bindings/mfd/samsung,sec-core.txt b/dts/Bindings/mfd/samsung,sec-core.txt index cdd079bfc2..c68cdd3651 100644 --- a/dts/Bindings/mfd/samsung,sec-core.txt +++ b/dts/Bindings/mfd/samsung,sec-core.txt @@ -31,8 +31,6 @@ Required properties: - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. Optional properties: - - interrupt-parent: Specifies the phandle of the interrupt controller to which - the interrupts from s2mps11 are delivered to. - interrupts: Interrupt specifiers for interrupt sources. - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled down. When the system is suspended it will always go down thus triggerring diff --git a/dts/Bindings/mfd/stmpe.txt b/dts/Bindings/mfd/stmpe.txt index f9065a5781..c797c05cd3 100644 --- a/dts/Bindings/mfd/stmpe.txt +++ b/dts/Bindings/mfd/stmpe.txt @@ -10,7 +10,6 @@ Required properties: Optional properties: - interrupts : The interrupt outputs from the controller - interrupt-controller : Marks the device node as an interrupt controller - - interrupt-parent : Specifies which IRQ controller we're connected to - wakeup-source : Marks the input device as wakable - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - irq-gpio : If present, which GPIO to use for event IRQ diff --git a/dts/Bindings/mfd/tc3589x.txt b/dts/Bindings/mfd/tc3589x.txt index 23fc2f21f5..4f22b2b07d 100644 --- a/dts/Bindings/mfd/tc3589x.txt +++ b/dts/Bindings/mfd/tc3589x.txt @@ -15,7 +15,6 @@ Required properties: - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893", "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896" - reg : I2C address of the device - - interrupt-parent : specifies which IRQ controller we're connected to - interrupts : the interrupt on the parent the controller is connected to - interrupt-controller : marks the device node as an interrupt controller - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this diff --git a/dts/Bindings/mfd/tps65086.txt b/dts/Bindings/mfd/tps65086.txt index 9cfa886fe9..67eac0ed32 100644 --- a/dts/Bindings/mfd/tps65086.txt +++ b/dts/Bindings/mfd/tps65086.txt @@ -3,7 +3,6 @@ Required properties: - compatible : Should be "ti,tps65086". - reg : I2C slave address. - - interrupt-parent : Phandle to the parent interrupt controller. - interrupts : The interrupt line the device is connected to. - interrupt-controller : Marks the device node as an interrupt controller. - #interrupt-cells : The number of cells to describe an IRQ, should be 2. diff --git a/dts/Bindings/mfd/tps65910.txt b/dts/Bindings/mfd/tps65910.txt index 8af1202b38..4f62143afd 100644 --- a/dts/Bindings/mfd/tps65910.txt +++ b/dts/Bindings/mfd/tps65910.txt @@ -22,7 +22,7 @@ Required properties: The valid regulator-compatible values are: tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1, vaux2, vaux33, vmmc, vbb - tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5, + tps65911: vrtc, vio, vdd1, vdd2, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8 - xxx-supply: Input voltage supply regulator. diff --git a/dts/Bindings/mfd/tps65912.txt b/dts/Bindings/mfd/tps65912.txt index 717e66d231..8becb183a4 100644 --- a/dts/Bindings/mfd/tps65912.txt +++ b/dts/Bindings/mfd/tps65912.txt @@ -3,7 +3,6 @@ Required properties: - compatible : Should be "ti,tps65912". - reg : Slave address or chip select number (I2C / SPI). - - interrupt-parent : The parent interrupt controller. - interrupts : The interrupt line the device is connected to. - interrupt-controller : Marks the device node as an interrupt controller. - #interrupt-cells : The number of cells to describe an IRQ, should be 2. diff --git a/dts/Bindings/mfd/twl-familly.txt b/dts/Bindings/mfd/twl-familly.txt index a66fcf9467..56f244b5d8 100644 --- a/dts/Bindings/mfd/twl-familly.txt +++ b/dts/Bindings/mfd/twl-familly.txt @@ -16,7 +16,6 @@ Required properties: - interrupt-controller : Since the twl support several interrupts internally, it is considered as an interrupt controller cascaded to the SoC one. - #interrupt-cells = <1>; -- interrupt-parent : The parent interrupt controller. Optional node: - Child nodes contain in the twl. The twl family is made of several variants diff --git a/dts/Bindings/mfd/twl6040.txt b/dts/Bindings/mfd/twl6040.txt index 9a98ee7c32..06e9dd7a0d 100644 --- a/dts/Bindings/mfd/twl6040.txt +++ b/dts/Bindings/mfd/twl6040.txt @@ -9,7 +9,6 @@ Required properties: - compatible : "ti,twl6040" for twl6040, "ti,twl6041" for twl6041 - reg: must be 0x4b for i2c address - interrupts: twl6040 has one interrupt line connecteded to the main SoC -- interrupt-parent: The parent interrupt controller - gpio-controller: - #gpio-cells = <1>: twl6040 provides GPO lines. - #clock-cells = <0>; twl6040 is a provider of pdmclk which is used by McPDM diff --git a/dts/Bindings/mfd/wm831x.txt b/dts/Bindings/mfd/wm831x.txt index 505709403d..6b84b1b0d0 100644 --- a/dts/Bindings/mfd/wm831x.txt +++ b/dts/Bindings/mfd/wm831x.txt @@ -22,7 +22,6 @@ Required properties: - interrupts : The interrupt line the IRQ signal for the device is connected to. - - interrupt-parent : The parent interrupt controller. - interrupt-controller : wm831x devices contain interrupt controllers and may provide interrupt services to other devices. -- cgit v1.2.3