From a05d5c206c91b17eb13ab9631d93e0a9b6fb92f8 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 8 Dec 2015 07:33:36 +0100 Subject: dts: update to v4.3-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/net/nfc/st-nci.txt | 33 --------------------------------- 1 file changed, 33 deletions(-) delete mode 100644 dts/Bindings/net/nfc/st-nci.txt (limited to 'dts/Bindings/net/nfc/st-nci.txt') diff --git a/dts/Bindings/net/nfc/st-nci.txt b/dts/Bindings/net/nfc/st-nci.txt deleted file mode 100644 index d707588ed7..0000000000 --- a/dts/Bindings/net/nfc/st-nci.txt +++ /dev/null @@ -1,33 +0,0 @@ -* STMicroelectronics SAS. ST NCI NFC Controller - -Required properties: -- compatible: Should be "st,st21nfcb-i2c" or "st,st21nfcc-i2c". -- clock-frequency: I²C work frequency. -- reg: address on the bus -- interrupt-parent: phandle for the interrupt gpio controller -- interrupts: GPIO interrupt to which the chip is connected -- reset-gpios: Output GPIO pin used to reset the ST21NFCB - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. - -Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): - -&i2c2 { - - status = "okay"; - - st21nfcb: st21nfcb@8 { - - compatible = "st,st21nfcb-i2c"; - - reg = <0x08>; - clock-frequency = <400000>; - - interrupt-parent = <&gpio5>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; - - reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; - }; -}; -- cgit v1.2.3