From 574eed3f6fcf056aa4c9e46c4b5224e3f7844d8d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 19 Dec 2019 05:46:54 +0100 Subject: dts: update to v5.5-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/net/nfc/pn532.txt | 46 ++++++++++++++++++++++++++++++++++++++ dts/Bindings/net/nfc/pn533-i2c.txt | 29 ------------------------ 2 files changed, 46 insertions(+), 29 deletions(-) create mode 100644 dts/Bindings/net/nfc/pn532.txt delete mode 100644 dts/Bindings/net/nfc/pn533-i2c.txt (limited to 'dts/Bindings/net/nfc') diff --git a/dts/Bindings/net/nfc/pn532.txt b/dts/Bindings/net/nfc/pn532.txt new file mode 100644 index 0000000000..a5507dc499 --- /dev/null +++ b/dts/Bindings/net/nfc/pn532.txt @@ -0,0 +1,46 @@ +* NXP Semiconductors PN532 NFC Controller + +Required properties: +- compatible: Should be + - "nxp,pn532" Place a node with this inside the devicetree node of the bus + where the NFC chip is connected to. + Currently the kernel has phy bindings for uart and i2c. + - "nxp,pn532-i2c" (DEPRECATED) only works for the i2c binding. + - "nxp,pn533-i2c" (DEPRECATED) only works for the i2c binding. + +Required properties if connected on i2c: +- clock-frequency: I²C work frequency. +- reg: for the I²C bus address. This is fixed at 0x24 for the PN532. +- interrupts: GPIO interrupt to which the chip is connected + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBone with PN532 on I2C2): + +&i2c2 { + + + pn532: nfc@24 { + + compatible = "nxp,pn532"; + + reg = <0x24>; + clock-frequency = <400000>; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + + }; +}; + +Example (for PN532 connected via uart): + +uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + + pn532: nfc { + compatible = "nxp,pn532"; + }; +}; diff --git a/dts/Bindings/net/nfc/pn533-i2c.txt b/dts/Bindings/net/nfc/pn533-i2c.txt deleted file mode 100644 index 2efe3886b9..0000000000 --- a/dts/Bindings/net/nfc/pn533-i2c.txt +++ /dev/null @@ -1,29 +0,0 @@ -* NXP Semiconductors PN532 NFC Controller - -Required properties: -- compatible: Should be "nxp,pn532-i2c" or "nxp,pn533-i2c". -- clock-frequency: I²C work frequency. -- reg: address on the bus -- interrupts: GPIO interrupt to which the chip is connected - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. - -Example (for ARM-based BeagleBone with PN532 on I2C2): - -&i2c2 { - - - pn532: pn532@24 { - - compatible = "nxp,pn532-i2c"; - - reg = <0x24>; - clock-frequency = <400000>; - - interrupt-parent = <&gpio1>; - interrupts = <17 IRQ_TYPE_EDGE_FALLING>; - - }; -}; -- cgit v1.2.3